CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date
Issued to:
This is to certify that representative samples of
20171128-MH28652 MH28652-20171128 2017-November-28
Westex by Milliken 920 Milliken Rd, M-147 Spartanburg, SC 29303 USA Component used in Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire and Against Hydrocarbon Flash Fire See pages 2-5 for models Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety:
NFPA 2112, Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire 2018 Edition. CAN/CGSB 155.20, Standard on Workwear for Protection Against Hydrocarbon Flash Fire, 2000 Edition.
Additional Information:
See the UL Online Certifications Directory at www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 5
CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date
20171128-MH28652 MH28652-20171128 2017-November-28
Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Certification Mark on the product. Outer Shell Fabrics These fabrics have been tested in accordance with the following table
Style Designation
MPG S000106000 Westex® CXP® MPG S000106001 Westex® CXP® MPG S00010614X Westex® Synergy® or MPG S00010624X Westex® Synergy® MPG S00010616X Westex® Synergy® or MPG S00010626X Westex® Synergy® MPG S000106159 Westex® AllOut™
Weight (oz/yd²)
Material Composition
Weave
6.0
100% Nomex IIIA, Plain weave, wicking finish
Plain
4.5
100% Nomex IIIA
Plain
4.5
93% Nomex/5% Kevlar/2% P-140
Plain
6.0
93% Nomex/5% Kevlar/2% P-140
Plain
6.0
93% Nomex/5% Kevlar/2% P-140
Plain
X indicates “finish” as follows: 1=Freedom, 3=Autoclave, 5=Hydropel, 6=Comfort Freedom
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 5
CAN/ CGSB 155.20 2000 Edition
NFPA 2112 2018 Edition
CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date
20171128-MH28652 MH28652-20171128 2017-November-28
Outer Shell Fabrics (Cont’d) These fabrics have been tested in accordance with the following table:
Style Designation
MPG S00010682Y Westex® DH, or MPG S00010683Y Westex® DH MPG S00010686Y Westex® DH or MPG S00010687Y Westex® DH MPG S00010688Y Westex® DH or MPG S00010689Y Westex® DH MPG S00010680Y Westex® DH or MPG S00010681Y Westex® DH
Weight (oz/yd²)
Material Composition
Weave
6.5
48% Tencel/40% Modacrylic/12% Aramid
Twill
7.5
48% Tencel/40% Modacrylic/12% Aramid
Twill
8.5
48% Tencel/40% Modacrylic/12% Aramid
Twill
5.5
48% Tencel/40% Modacrylic/12% Aramid
Twill
Y indicates “finish” as follows: 1=SD Wick Q, 2=Wick G, 7=Hydropel
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 3 of 5
CAN/ CGSB 155.20 2000 Edition
NFPA 2112 2018 Edition
CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date
20171128-MH28652 MH28652-20171128 2017-November-28
Outer Shell Fabrics (Cont’d) These fabrics have been tested in accordance with the following table
Style Designation MPG S00010615X Westex® Synergy® MPG S00010646X Westex® Synergy® MPG S00010617X Westex® Synergy® MPG S00010634X Westex® Synergy® MPG S000106961 Westex® VRE
Weight (oz/yd²) 5.0 6.5 7.5 4.5 6.5
Material Composition 93% Nomex/5% Kevlar/2% P-140 93% Nomex/5% Kevlar/2% P-140 93% Nomex/5% Kevlar/2% P-140 93% Nomex/5% Kevlar/2% P-140 48% Tencel/39% Modacrylic/12% Aramid/1% Antistat
Weave
NFPA 2112 2018 Edition
Plain
Twill
Plain
AirWeave
Twill
X indicates “finish” as follows: 1=Freedom, 3=Autoclave, 5=Hydropel, 6=Comfort Freedom
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 4 of 5
CAN/CGSB 155.20 2000 Edition
CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date
20171128-MH28652 MH28652-20171128 2017-November-28
Outer Shell Fabrics (Cont’d) These fabrics have been tested in accordance with the following table
Style Designation MPG S00010670Z Nomex™ MHP or MPG S00010671Z Nomex™ MHP MPG S000106601 Protera or MPG S000106611 Protera MPG S000106641 Protera or MPG S000106651 Protera MPG S000106621 Protera or MPG S000106631 Protera
NFPA 2112 2018 Edition
CAN/CGSB 155.20 2000 Edition
Weight (oz/yd²)
Material Composition
Weave
7.0
34% Aramid/33% Tencel/31% Modacrylic/2% Antistat
Twill
6.5
62% Modacrylic/36% Aramid/2% P-140
Twill
7.5
62% Modacrylic/36% Aramid/2% P-140
Twill
8.0
62% Modacrylic/36% Aramid/2% P-140
Twill
Z indicates “finish” as follows: 1=Wick Q, 2=Wick G, 7=FC
Pocketing Fabrics
Style Designation MPG S000106652 Pocketing
Weight (oz/yd²) 7.0
Material Composition
Weave
NFPA 2112 2018 Edition
65% Modacrylic/33% Aramid/2% Antistat
Twill
CAN/CGSB 155.20 2000 Edition
This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 5 of 5