Kéo Classic Affordable LOOK technology
- Large platform area - Lightweight - Adjustable spring tension Among the lightest pedals in its category (139g) thanks to its composite pedal body. Large contact surface area for a high level of pedaling comfort and efficiency. Kéo grip cleats provide walking confidence with built in rubber contacts. Adjustable cleat retention to accommodate a wide range of cyclists, from novice to advanced. target="_self">Customize your cleats' ajustment thanks to the KEO FIT system
Technical data USE
ROAD - LEISURE
BODY
COMPOSITE
AXLE
STEEL
THREAD
9/16 X 20 MM
ROLLER BEARING
1 ROLLER BEARING, 1 NEEDLE BEARING
HEIGHT AXLE / SOLE
15,7 MM
AXLE DISTANCE PEDAL / CRANK
53 MM
MULTITENSOR
YES- ADJUSTABLE FROM 8 TO 12 Nm
CLEATS
GREY KEO GRIP CLEATS
ANGULAR FREEDOM
0째, 4.5째 OR 9째 ACCORDING TO TYPE OF CLEAT (BLACK, GREY OR RED)
PEDAL WEIGHT
139 g per pedal. (354 g PER PAIR WITH CLEATS AND HARDWARE)
COLOURS
GRAPHITE AND BLACK BODY / BLACK LEVER
ACCESSORIES RED BODY / BLACK LEVER
ONE PAIR GREY KEO GRIP CLEATS + HARDWARE (6 SCREWS 5 X 11 MM AND 6 WASHERS)
WARRANTY
2 YEARS
Technology Customize your cleats' ajustment thanks to the KEO FIT system Find KEO FIT centers THE KEO STANDARD The Keo standard was developed with the goal of minimizing the weight and volume of the cleat/pedal unit, while remaining compatible with all the shoes on the market. The operational kinematic is identical to the DELTA standard; pedal engagement and disengagement remain safe and very efficient. LARGE PEDAL PLATFORM AREA The platform area of Keo Classic allows excellent stability on the pedal as well as efficient power transmission. WEIGHT: 139g Heavier than Keo 2 Max, the Keo Classic is still very light for a product at less than $130. MULTITENSOR 8-12Nm The adjustable spring tension range allows any user, even a beginner to find the adjustment that suits his or her cycling ability and comfort. 3 BEARINGS / STEEL AXLE PROFILE The new axle profile of the Keo Classic maintains our Keo Carbon stack height even while using an oversized steel axle. It is composed of 2 miniature roller bearings (12 mm inside x 18 mm outside) and a needle bearing. LOOK axles are only validated for production after a rotational test of 1 million cycles at 100 rpm with a load of 90Kg on the center of the pedal and an off-center rotation (which creates a shock at each rotation). This test is more stringent than the most demanding standard currently enforced: EN1478l. Dual seals ensure a very long service life.