Katalog náhradních dílů Lemken - 2019 by Biso Schrattenecker Czech & Slovakia

A PART OF US: ORIGINAL-SPARE PARTS CATALOGUE 2019

Two very special symbols for two very special qualities: DuraL and DuraMAXX

From now on we will divide our wear parts into two very special wear part lines: One being the proven LEMKEN quality DuraL and the other being the DuraMAXX, the maximum wear part quality.

Table of contents Plough 6

Reconsolidation 53

Plough bodies DuraMAXX Plough body W Plough body CS Plough body DMS

7 8 10 12

Packers 53 Rubber tape 54 Roller star 54 Flexpack 55

Plough bodies DuraL Plough body B Plough body C Plough body D Plough body BS

15 16 18 20 22

Plough body CS Plough body US Plough body W

24 26 28

Seedbed Preparation

Plough body Plough body BU Plough body NBU

30 30 32

Cultivator shares Shares for seedbed preparation

61 61

Mouldboard supports

Cultivator tines Cultivator tines, small spring tine

62 62

Crumbler roller

Crosskill rings and bar

Stubble Cultivation

Concave discs

Bearing Concave discs

Additional tools for Round stalks 42 Skimmer 42

Spring tine and Stalk

Additional tools Trashboard DuraL Trashboard DuraMAXX

43 43 43

Share/Wing share/Guideboards

Share feet/screws

Additional tools Wide furrow cutter Subsoiler adjustable without tools Wide furrow cutter DuraMAXX / DuraL Subsoiler DuraMAXX

44 44 44 45 45

Foot complete

Harrows/Levelling foot

Shearbolts Cultivator

Wing share range for the Kristall cultivator

Additional tools DuraL Subsoiler straight stalk Subsoiler curved stalk

46 46 46

Shearbolts 37 Shearbolts, Mounting screws legs

Additional tools

Additional tools DuraMAXX 40 Skimmer 40 Additional tools DuraL 41 Skimmer 41

Additional tools 47 Disc 47 Bearing for Coulter disc 49

Power Harrows

Blade tine 57 Zirkon 58 Rotors per implement 58

Cultivator 72

Table of contents Drilling 83

Fieldsprayers 109

Seed wheels

Pump spare parts

109

Seed pipes and Bottom flaps

Filter inserts/nozzle membranes

110

Seed hoses and Disc coulters

Bearing 87 Seed drill bearing 87 Bearing spare parts kit double disc coulters 87 Seed drill scraper

Pressure rollers

Seed drill harrow 90 Saphir/Solitair 90 Solitair 25 90 Eurodrill/DKA 91 Sensors/2nd spring set/overload link

Conical plug/Crank/Balance

Azurit precision seed drill technical

Further seed coulters Suffolk coulter for Saphir/Solitair Single disc coulter for Saphir/Solitair Coulter for DKA Disc coulter for DKA Coulter for Eurodrill Disc coulter for Eurodrill

95 95 95 96 97 98 99

Roller scraper and bearing

101

Scraper for roller

LEMKEN Original Parts Packing unit Packing units frequently used screws/bolts

112 112 112

Operating materials 113 Paint/Colour 113 Oil 113 Grease 113 Screw locking 113 Further operating materials 113 Consumable & Label 114 Zipper bags 114 Splicing tape 114 Label 114

Main assembly structure

115

101

Roller bearing 104

Wheel mark eradicator

106

Flat share and Duckfoot-share

106

Eradicator point and Eradicator disc

107

Plough

Plough Plough bodies DuraMAXX

Slats or mouldboard without bores, punched holes and welding lines yy use of new materials with maximum hardness and maximum parts life yy parts life increase up to 150 % Slats or mouldboards are not part of the supporting construction yy complete utilization of the wearing material

Large clearance behind the plough body yy ploughing without blockage Adjustable pitch of the plough body by means of an eccentric adjuster yy when ploughing with flat pitch, good and smooth running of the plough yy when ploughing with steep pitch, good penetration of the plough in hard soil conditions

Fixing without bolts to the supporting frog by means of hooks yy ideal sliding characteristics yy quick exchange without tools yy reduction of time of exchange up to 80 %

Slatted body

Slatted body and frog

Mouldboard body

Mouldboard and frog

DuraMAXX Hybrid body with plastic slats in the upper and lower areas

DuraMAXX Hybrid body equipped completely with plastic slats

Plough

Plough body DuraMAXX Plough body W 40

15 h

a 13 d

b/c i 11

2 q

p/o

5 e

Description

1 2 3 4 4 5 5 6 7 8 9 10 11 12 13 14 15

Mouldboard DMW40 RI / LE Shin DMCK RI / LE Wing SB43D RI / LE Wing SB45D RI / LE Wing SB45P RI / LE Wing SB56D RI / LE Wing SB56P RI / LE Wing SB58D RI / LE Share S42A RI / LE Point SC2P RI / LE Point SC2PS RI / LE Point SC2PD RE / LI Frog DMW RI / LE Landside DMV1 Landside wedge AK12W 12x103x170 Sword coulter AS2 RE 6x238x240 RI / LE Landside DMV2 RI / LE

Description

a b c d e f g h i j k

Hexagon bolt M10x25-8.8 Zn DIN933 Countersunk bolt M20x70x8,5-12.9 Zn Countersunk bolt M20x80x8,5-12.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x45-12.9-MU-10 Zn Countersunk bolt M16x40-10.9 4KT Zn Selflocking nut NM10-8 DIN985 Zn Selflocking nut NM16-8 Zn DIN985 Selflocking nut NM20-8 Zn DIN985

9, 10

Position

Info

Part no 344 2100 / 344 2101 345 1030 / 345 1031 335 2120 / 335 2121 335 2130 / 335 2131 335 2230 / 335 2231 335 2134 / 335 2135 335 2234 / 335 2235 335 2138 / 335 2139 333 5032 / 333 5033 336 4156 / 336 4157 33610006 / 33610007 33610008 / 33610009 467 1046 / 467 1047 341 1525 340 1903 349 2890 / 349 2891 34110006 / 34110007

thick thick hard-faced thick hard-faced thick for very rocky conditions hard-faced replaced by 33610008 / 33610009 angled, hard-faced, for better penetration in heavy and dry soils

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Part no

Position

Description

301 3212 301 5747 301 5750 301 5767 301 5785 301 5789 301 5794 301 6142 303 0933 303 0935 303 0936

l m

Washer 15 DIN7349 Washer D16,5/35x3

Washer D 35/16x5

o p q r

Washer 13/32x1,25 St-Zn Washer 13/35x5±0,2 Zn DIN6340 Securing pin 5x32 d1=4,5 Zn Eccentric washer Exzentersch.

Info not shown – cardboard shim, 3 mm thick not shown – cardboard shim, 3 mm thick

Part no 305 6180 305 7701 305 7703 305 8582 30510060 31110015 56710004

Plough

Plough body DuraMAXX Plough body W 52

15 h

a 13 d

b/c i 11

2 q

p/o

5 e

Position

Description

1 2 3 4 4 5 5 6 7 8 9 10 11 12 13 14 15

Mouldboard DMW52 RI / LE Shin DMCK RI / LE Wing SB43D RI / LE Wing SB45D RI / LE Wing SB45P RI / LE Wing SB56D RI / LE Wing SB56P RI / LE Wing SB58D RI / LE Share S42A RI / LE Point SC2P RI / LE Point SC2PS RI / LE Point SC2PD RE / LI Frog DMW RI / LE Landside DMV1 Landside wedge AK12W Sword coulter AS2 RI / LE Landside DMV2 RI / LE

Position

Description

a b c d e f g h i j k

9, 10

Info

Part no 344 2104 / 344 2105 345 1030 / 345 1031 335 2120 / 335 2121 335 2130 / 335 2131 335 2230 / 335 2231 335 2134 / 335 2135 335 2234 / 335 2235 335 2138 / 335 2139 333 5032 / 333 5033 336 4156 / 336 4157 33610006 / 33610007 33610008 / 33610009 467 1046 / 467 1047 341 1525 340 1903 349 2890 / 349 2891 34110006 / 34110007

thick thick hard-faced thick hard-faced thick for very rocky conditions hard-faced replaced by 33610008 / 33610009 angled, hard-faced, for better penetration in heavy and dry soils

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Part no

Position

Description

301 3212 301 5747 301 5750 301 5767 301 5785 301 5789 301 5794 301 6142 303 0933 303 0935 303 0936

l m

Washer 15 DIN7349 Washer D16,5/35x3

Washer D 35/16x5

o p q r

Washer 13/32x1,25 St-Zn Washer 13/35x5±0,2 Zn DIN6340 Securing pin 5x32 d1=4,5 Zn Eccentric washer Exzentersch.

Info not shown – cardboard shim, 3 mm thick not shown – cardboard shim, 3 mm thick

Part no 305 6180 305 7701 305 7703 305 8582 30510060 31110015 56710004

Plough

Plough body DuraMAXX Plough body CS 40 16

j s

a 14 d

12 5

i 15

l / p,q

10, 11 9

b/c

Position

Description

Info

Part no

1 1 2 2 3 3 4 4 5 6 6 7 8 9 10 11 12 13 14 15 16

Mouldboard slat 1 DMCS40 RI / LE Mouldboard slat 1 DMCS40 KU RI / LE Mouldboard slat 2 DMCS40 RI / LE Mouldboard slat 2 DMCS40 KU RI / LE Mouldboard slat 3 DMCS40 RI / LE Mouldboard slat 3 DMCS40 KU RI / LE Mouldboard slat 4 DMCS40 RI / LE Mouldboard slat 4 DMCS40 KU RI / LE Shin DMCK RI / LE Wing SB56D RI / LE Wing SB56P RI / LE Wing SB58D RI / LE Share S42A RI / LE Point SC2P RI / LE Point SC2PS RI / LE Point SC2PD RE / LI Frog DMCS RI / LE Landside DMV1 Landside wedge AK12W Sword coulter AS2 RI / LE Landside DMV2 RI / LE

10 mm plastic 10 mm plastic 10 mm plastic 10 mm plastic for 10 mm

344 4418 / 344 4419 344 0422 / 344 0423 344 4428 / 344 4429 344 0432 / 344 0433 344 4438 / 344 4439 344 0442 / 344 0443 344 4448 / 344 4449 344 0452 / 344 0453 345 1030 / 345 1031 335 2134 / 335 2135 335 2234 / 335 2235 335 2138 / 335 2139 333 5032 / 333 5033 336 4156 / 336 4157 33610006 / 33610007 33610008 / 33610009 467 1040 / 467 1041 341 1525 340 1903 349 2890 / 349 2891 34110002 / 34110003

Position

Description

a b c d e f g h i j k l

hard-faced for very rocky conditions replaced by 33610008 / 33610009 angled, hard-faced, for better penetration in heavy and dry soils

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Part no

Position

Description

301 3212 301 5747 301 5750 301 5767 301 5785 301 5789 301 5794 301 6142 303 0933 303 0935 303 0936 305 6167

m n

Washer 15 DIN7349 Washer D16,5/35x3

Washer D 35/16x5

p q r s

Washer 13/32x1,25 St-Zn Washer 13/35x5±0,2 Zn DIN6340 Securing pin 5x32 d1=4,5 Zn Eccentric washer Exzentersch.

Info not shown – cardboard shim, 3 mm thick not shown – cardboard shim, 3 mm thick

Part no 305 6180 305 7701 305 7703 305 8582 30510060 31110015 56710004

Plough

Plough body DuraMAXX Plough body CS 50

j r

a 14 d

b/c 12

l/n 9

10,11

Position

Description

Info

Part no

1 2 3 4 5 6 6 7 8 9 10 11 12 13 14 15 16

Mouldboard slat 1 DMCS50 RI / LE Mouldboard slat 2 DMCS50 RI / LE Mouldboard slat 3 DMCS50 RI / LE Mouldboard slat 4 DMCS40 RI / LE Shin DMCK RI / LE Wing SB56D RI / LE Wing SB56P RI / LE Wing SB58D RI / LE Share S42A RI / LE Point SC2P RI / LE Point SC2PS RI / LE Point SC2PD RE / LI Frog DMCS RI / LE Landside DMV1 Landside wedge AK12W 12x103x170 Sword coulter AS2 RI / LE Landside DMV2 RI / LE

10mm 10mm 10mm 10mm for 10 mm thick hard-faced thick for very rocky conditions hard-faced replaced by 33610008 / 33610009 angled, hard-faced, for better penetration in heavy and dry soils

344 4420 / 344 4421 344 4430 / 344 4431 344 4440 / 344 4441 344 4448 / 344 4449 345 1030 / 345 1031 335 2134 / 335 2135 335 2234 / 335 2235 335 2138 / 335 2139 333 5032 / 333 5033 336 4156 / 336 4157 33610006 / 33610007 33610008 / 33610009 467 1040 / 467 1041 341 1525 340 1903 349 2890 / 349 2891 34110006 / 34110007

Position

Description

a b c d e f g h i j k l

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Part no

Position

Description

301 3212 301 5747 301 5750 301 5767 301 5785 301 5789 301 5794 301 6142 303 0933 303 0935 303 0936 305 6167

m n

Washer 15 DIN7349 Washer D16,5/35x3

Washer D 35/16x5

p q r s

Washer 13/32x1,25 St-Zn Washer 13/35x5±0,2 Zn DIN6340 Securing pin 5x32 d1=4,5 Zn Eccentric washer Exzentersch.

Info not shown – cardboard shim, 3 mm thick not shown – cardboard shim, 3 mm thick

Part no 305 6180 305 7701 305 7703 305 8582 30510060 31110015 56710004

Plough

Plough body DuraMAXX Plough body DMS CS40

j r

a 14 d

b/c 12

o/p 9

10, 11

Position

Description

Info

Part no

1 2 3 4 5 6 6 7 8 9 10 11 12 13 14 15 16

Mouldboard slat 1 DMSCS40 RI / LE Mouldboard slat 2 DMSCS40 RI / LE Mouldboard slat 3 DMSCS40 RI / LE Mouldboard slat 4 DMSCS RI / LE Shin DMSCK RI / LE Wing SB56D RI / LE Wing SB56P RI / LE Wing SB58D RI / LE Share S42A RI / LE Point SC2P RI / LE Point SC2PS RI / LE Point SC2PD RE / LI Frog DMCS RI / LE Landside DMV1 Landside wedge AK12W 12x103x170 Sword coulter AS2 RE 6x238x240 Landside DMV2 RI / LE

8mm 8mm 8mm 8mm for 8mm* thick hard-faced thick for very rocky conditions hard-faced replaced by 33610008 / 33610009 angled, hard-faced, for better penetration in heavy and dry soils

34410010 / 34410011 34410012 / 34410013 34410014 / 34410015 34410008 / 34410009 34510002 / 34510003 335 2134 / 335 2135 335 2234 / 335 2235 335 2138 / 335 2139 333 5032 / 333 5033 336 4156 / 336 4157 33610006 / 33610007 33610008 / 33610009 467 1040 / 467 1041 341 1525 340 1903 349 2890 / 349 2891 34110006 / 34110007

Position

Description

a b c d e f g h i j k

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Part no

Position

Description

301 3212 301 5747 301 5750 301 5767 301 5785 301 5789 301 5794 301 6142 303 0933 303 0935 303 0936

l m

Washer 15 DIN7349 Washer D16,5/35x3

Washer D 35/16x5

o p q r

Washer 13/32x1,25 St-Zn Washer 13/35x5±0,2 Zn DIN6340 Securing pin 5x32 d1=4,5 Zn Eccentric washer Exzentersch.

Info not shown – cardboard shim, 3 mm thick not shown – cardboard shim, 3 mm thick

Part no 305 6180 305 7701 305 7703 305 8582 30510060 31110015 56710004

* The thinner mouldboard slats in the 8 mm version may be replaced by the 10 mm version. The mouldboard slats should have the same thickness on each body. The mouldboard edge should then also have a thickness of 10 mm.

Plough

Plough body DuraMAXX Plough body DMS CS50

j r

a 14 d

b/c 12

i 15

o/p

10, 11 9

Position

Description

Info

Part no

1 2 3 4 5 6 6 7 8 9 10 11 12 13 14 15 16

Mouldboard slat 1 DMSCS50 RI /LE Mouldboard slat 2 DMSCS50 RI /LE Mouldboard slat 3 DMSCS50 RI /LE Mouldboard slat 4 DMSCS40 RI /LE Shin DMSCK RI /LE Wing SB56D RI /LE Wing SB56P RI /LE Wing SB58D RI /LE Share S42A RI /LE Point SC2P RI /LE Point SC2PS RI / LE Point SC2PD RE / LI Frog DMCS RI /LE Landside DMV1 Landside wedge AK12W Sword coulter AS2 RI /LE Landside DMV2 RI /LE

8mm 8mm 8mm 8mm for 8mm* thick hard-faced thick for very rocky conditions hard-faced replaced by 33610008 / 33610009 angled, hard-faced, for better penetration in heavy and dry soils

34410002 / 34410003 34410004 / 34410005 34410006 / 34410007 34410008 / 34410009 34510002 / 34510003 335 2134 / 335 2135 335 2234 / 335 2235 335 2138 / 335 2139 333 5032 / 333 5033 336 4156 / 336 4157 33610006 / 33610007 33610008 / 33610009 467 1040 / 467 1041 341 1525 340 1903 349 2890 / 349 2891 34110006 / 34110007

Position

Description

a b c d e f g h i j k

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Part no

Position

Description

301 3212 301 5747 301 5750 301 5767 301 5785 301 5789 301 5794 301 6142 303 0933 303 0935 303 0936

l m

Washer 15 DIN7349 Washer D16,5/35x3

Washer D 35/16x5

o p q r

Washer 13/32x1,25 St-Zn Washer 13/35x5±0,2 Zn DIN6340 Securing pin 5x32 d1=4,5 Zn Eccentric washer Exzentersch.

Info not shown – cardboard shim, 3 mm thick not shown – cardboard shim, 3 mm thick

Part no 305 6180 305 7701 305 7703 305 8582 30510060 31110015 56710004

Notes

Plough

Plough bodies DuraL

Mouldboard separated into an extra-large shin and mouldboard yy wear resistant shape, individually exchangeable shin Slats of the slatted bodies made of thick, completely cross hardened special steel yy high wear resistance Slats individually replaceable; plough bolts deeply countersunk yy slats securely attached even after long use

Frog is heat-treated yy high strength, long lifetime yy plough body with adjustable pitch yy always good penetration of the plough, optimum working quality, reduced fuel consumption Smooth crossing from share to mouldboard, continuously harmonised shape yy easy to pull Hard-faced point with hard metal coating available yy Approx. three times the service life

Sword coulter Landside

Slatted mouldboard

Landside wedge Shin

Wing Point

Hard-faced point

Mouldboard

Shin

Plough

Plough bodies DuraL Plough body B (B 20 / B 25 / B 25H / B 30 / B 35 / B 40)

d 21

24, 25

17 18

e 22

m 2

n/o

i 13

Plough

Plough bodies DuraL Position

Description

1 1 1 1 1 1 2 2 3 4 5 6 7 7 7 8 8 8 9 10 11 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 25

Mouldboard B20B RI / LE Mouldboard B25B RI / LE Mouldboard B25HB RI / LE Mouldboard B30B RI / LE Mouldboard B35B RI / LE Mouldboard B40B RI / LE Shin B2K RI / LE Shin B2K3 RI / LE Shin B2KH RI / LE Frog BK13 RI / LE Frog BK12 RE-V Wing SB36 RI / LE Wing SB43 RI / LE Wing SB43D RI / LE Wing SB43P RI / LE Wing SB45 RI / LE Wing SB45D RI / LE Wing SB45P RI / LE Share S41A RI / LE Share S45A RI / LE Point B2S RI / LE Point B2SP RI / LE Point B2SPS RI / LE Reversible point S2W RI / LE Landside A42 120x12x420 Landside A36H 180x12x360 Landside A42H 180x12x420 Landside wedge AK10 RI / LE Sword coulter AS2 RI / LE Tail piece ST4 RI / LE Landside protector SC18 256x175x8 Frog-protector SCR11 RI / LE Strengthening 40x10x482 RI / LE Stay M20x340-440 0/17 GRD Stay M20x340-440 8/29 GRD Stay M24x340-440 8/29 GRD Stay M24 570-670 15/60

Info

Part no

Three ply steel Chamfered shape

suitable for B20 / B25H suitable for B25 / B30 suitable for B25 / B30, thick suitable for B30, hard-faced suitable for B35 / B40 suitable for B35 / B40, thick suitable for B40, hard-faced

hard-faced angled, hard-faced, for better penetration in heavy and dry soils Height 120 mm Height 180 mm Height 180 mm

for right and left

for BK12 for BK13 2. stay B40 short BK13 2. stay B40 long BK13

Position

Description

a b c d e f g h i j k l m n o

Hexagon bolt M16x40-12.9 A=max.3mm Zn Hexagon bolt M16x50-12.9 A=max.3mm Zn Hexagon bolt M16x45-8.8 Zn Countersunk bolt M16x105-10.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M10x45-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x36x4-12.9-MU-10Zn Countersunk bolt M12x50-8.8-MU Zn D608 Hexagon bolt M12x35-8.8 Zn DIN933 Selflocking nut NM12-8 Zn DIN985 Selflocking nut NM16-8 Zn DIN985 Washer D25/11x5 Zn Washer D16,5/35x3 Washer D 35/16x5

Info

incl. nuts incl. nuts incl. nuts incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

344 1020 / 344 1021 344 1024 / 344 1025 344 1026 / 344 1027 344 1030 / 344 1031 344 1034 / 344 1035 344 1040 / 344 1041 345 1000 / 345 1001 345 1006 / 345 1007 345 1010 / 345 1011 467 1010 / 467 1011 467 1002 / 467 1003 335 2010 / 335 2011 335 2020 / 335 2021 335 2120 / 335 2121 335 2220 / 335 2221 335 2030 / 335 2031 335 2130 / 335 2131 335 2230 / 335 2231 333 5020 / 333 5021 333 5030 / 333 5031 336 4050 / 336 4051 336 4150 / 336 4151 3364152 / 3364153 336 5540 / 336 5541 341 1504 341 1508 341 1460 340 1900 / 340 1901 349 2890 / 349 2891 347 6000 / 347 6001 340 1490 340 1480 / 340 1481 469 5410 / 469 5411 567 0172 567 0183 567 0157 56710001

Part no 301 3719 301 3774 301 5388 301 5741 301 5767 301 5769 301 5785 301 5789 301 5795 301 7334 303 0934 303 0935 305 6134 305 7701 305 7703

Plough

Plough bodies DuraL Plough body C (C 30 / C 40)

11 14 17

d 10

18 20

d 1

e d

m/n

Plough

Plough bodies DuraL Position

Description

1 1 1 2 3 4 4 4 5 6 7 8 9 10 11 12 13 14 14 15 16 17 18 19 20 21 22 23 23

Mouldboard C30B RI / LE Mouldboard C40B RI / LE Mouldboard C40KUB RI / LE Shin C2K RI / LE Wing SB36 RI / LE Wing SB43 RI / LE Wing SB43D RI / LE Wing SB43P RI / LE Share S41A RI / LE Point C2S RI / LE Point C2SP RI / LE Point C2PS RI / LE Landside A42 120x12x420 Landside A48 120x12x480 Landside A42H 180x12x420 Landside wedge AK10 RI / LE Sword coulter AS2 RI / LE Landside protector SC18 256x175x8 Frog-protector SCR11 RI / LE Frog-protector SCR11 LI 130x114 Frog CK13 RI / LE Frog CK12 RI / LE Strengthening 50x8x530 RE C40/D50 Strengthening 410x45 RE CK12 Tail piece ST4 RE 80x285 Stay M20x340-440 10/03 GRD Stay M24x340-440 14/6 GRD Wing SB45 RE 449x145x10 Wing SB45D RE 449x150x11

Info

Part no

plastic Three ply steel suitable for C30 suitable for C40, thick suitable for C40 suitable for C40, hard-faced

hard-faced angled, hard-faced, for better penetration in heavy and dry soils Height 120 mm Height 120 mm Height 180 mm

for right and left

suitable for CK13 suitable for CK12 suitable for C30 suitable for C40 suitable for C40 suitable for C40

Position

Description

a b c d e f g h i j k l m n

Hexagon bolt M16x40-12.9 A=max.3mm Zn Hexagon bolt M16x50-12.9 A=max.3mm Zn Hexagon bolt M16x45-8.8 Zn Countersunk bolt M16x105-10.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M10x45-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x50-8.8-MU Zn D608 Hexagon bolt M12x35-8.8 Zn DIN933 Selflocking nut NM12-8 Zn DIN985 Selflocking nut NM16-8 Zn DIN985 Washer D25/11x5 Zn Washer D16,5/35x3 Washer D 35/16x5

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

344 1130 / 344 1131 344 1140 / 344 1141 344 1144 / 344 1145 345 1004 / 345 1005 335 2010 / 335 2011 335 2020 / 335 2021 335 2120 / 335 2121 335 2220 / 335 2221 333 5020 / 333 5021 336 4054 / 333 5021 336 4154 / 336 4155 336 4158 / 336 4159 341 1504 341 1450 341 1460 340 1900 / 340 1901 349 2890 / 349 2891 340 1490 340 1480 340 1481 467 1014 / 467 1015 467 1006 / 467 1007 469 5450 / 469 5451 469 5424 / 469 5425 347 6000 / 347 6001 567 0314 567 0156 335 2030 / 335 2031 335 2130 / 335 2131

Part no 301 3719 301 3774 301 5388 301 5741 301 5767 301 5769 301 5785 301 5795 301 7334 303 0934 303 0935 305 6134 305 7701 305 7703

Plough

Plough bodies DuraL Plough body D 50 h

d 21

17 18

k 22

l e

m+n

g 6

g 12

Plough

Plough bodies DuraL Position

Description

1 2 2 3 4 5 6 6 7 7 7 9 10 11 11 12 13 14 15 16 17 18 19 20 21 22 23

Mouldboard D50B RI / LE Shin B2K RI / LE Shin B2K3 RI / LE Shin B2KH RI / LE Frog BK13 RI / LE Wing SB36 RI / LE Wing SB43 RI / LE Wing SB43P RI / LE Wing SB45 RI / LE Wing SB45D RI / LE Wing SB45P RI / LE Wing SB43D RI / LE Share S45A RI / LE Point B2S RI / LE Point B2SP RI / LE Point B2D2 RI / LE Reversible point S2W RI / LE Landside A42 120x12x420 Landside A36H 180x12x360 Landside A42H 180x12x420 Landside wedge AK10 RI / LE Sword coulter AS2 RI / LE Tail piece ST4 80x285 RI / LE Landside protector SC18 256x175x8 Frog-protector SCR11 130x114 RI / LE Strengthening 50x8x530 C40/D50 RI / LE Stay M20x370-470 9/14 GRD

Info

three ply steel Chamfered shape

hard-faced thick 11 mm instead of 10 mm hard-faced thick 11 mm instead of 10 mm for very rocky conditions hardfaced angled, hard-faced, for better penetration in heavy and dry soils Height 120 mm Height 180 mm Height 180 mm

for right and left

Position

Description

a b c d e f g h i j k l m n

Hexagon bolt M16x40-12.9 A=max.3mm Zn Hexagon bolt M16x50-12.9 A=max.3mm Zn Hexagon bolt M16x45-8.8 Zn Countersunk bolt M16x105-10.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M10x45-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x50-8.8-MU Zn D608 Hexagon bolt M12x35-8.8 Zn DIN933 Selflocking nut NM12-8 Zn DIN985 Selflocking nut NM16-8 Zn DIN985 Washer D25/11x5 Zn Washer D16,5/35x3 Washer D 35/16x5

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

Part no 344 1650 / 344 1651 345 1000 / 345 1001 345 1006 / 345 1007 345 1010 / 345 1011 467 1010 / 467 1011 335 2010 / 335 2011 335 2020 / 335 2021 335 2220 / 335 2221 335 2030 / 335 2031 335 2130 / 335 2131 335 2230 / 335 2231 335 2120 / 335 2121 333 5030 / 333 5031 336 4050 / 336 4051 336 4150 / 336 4151 336 4152 / 336 4153 336 5540 / 336 5541 341 1504 341 1508 341 1460 340 1900 / 340 1901 349 2890 / 340 1901 347 6000 / 347 6001 340 1490 340 1480 / 340 1481 469 5450 / 469 5451 567 0150

Part no 301 3719 301 3774 301 5388 301 5741 301 5767 301 5769 301 5785 301 5795 301 7334 303 0934 303 0935 305 6134 305 7701 305 7703

Plough

Plough bodies DuraL Plough body BS (BS 20 / BS 40 / BS 42) k

g 25

24 33

d c

b 3

7 32

m 30

e+f

n/o

14,15

n/o 9

j 12,13

j i

Plough

Plough bodies DuraL Position

Description

Info

Part no

1 1 2 2 3 3 4 4 4 5 5 6 7 8 9 9 9 10 10 10 11 11 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 25 26 27 27 28 29 30 31 32 33

Mouldboard slat 1 BS RE 544mm Mouldboard slat 1 BS/W RE 120x561 Mouldboard slat 2 BS20 RE 587mm Mouldboard slat 2 BS40/42 RE 677mm Mouldboard slat 3 BS20 RE 740mm Mouldboard slat 3 BS40/42 RE 950mm Mouldboard slat 4 BS20 RE 825mm Mouldboard slat 4 BS40 RE 985mm Mouldboard slat 4 BS42 RE 985x120 Shin B2K RE Shin B2K3 RE Shin B2KH RE Frog BK13 RE Frog BK12 RE-V Wing SB43 RE 428x145x10 Wing SB43D RE 428x150x11 Wing SB43P RE 428x150x11 Wing SB45 RE 449x145x10 Wing SB45D RE 449x150x11 Wing SB45P RE 449x150x11 Wing SB56 RE 558x145x10 Wing SB56D RE 558x150x11 Wing SB56P RE 558x150x11 Share S41A RE 534x150x11 Share S45A RE 654x150x11 Point B2S RE 10x98x240 Point B2SP RE Point B2PS RI / LE Reversible point S2W RE 100x13x375 Landside A42 120x12x420 Landside A36H 180x12x360 Landside A42H 180x12x420 Landside wedge AK10 RE 120x10x207 Sword coulter AS2 RE 6x238x240 Landside protector SC18 256x175x8 Frog-protector SCR11 RE 130x114 Stay M20x340-440 39/6 GRD Stay M24x450-550 42/07 GRD Stay M20x650-750 2/17 GRD Stay M24x700-840 15/55 GRD Stay M20x340-440 43/1 GRD Stay M20x650-750 7/16 GRD Support BS40+42 RE BK13 Support BS40 RE Lashing 30x8x75 1xGEB6GRD Zn Strengthening 40x10x260+D12,25+D20,25 Screw/bolt mit Lasche M16x40

suitable for BS20 / BS40 / BS42 suitable for BS40 / BS42 turnable suitable for BS20 suitable for BS40 / BS42 suitable for BS20 suitable for BS40 / BS42 suitable for BS20 suitable for BS40 suitable for BS42

344 4010 / 344 4011 344 4012 / 344 4013 344 4024 / 344 4025 344 4020 / 344 4021 344 4034 / 344 4035 344 4030 / 344 4031 344 4044 / 344 4045 344 4040 / 344 4041 344 4042 / 344 4043 345 1000 / 345 1001 345 1006 / 345 1007 345 1010 / 345 1011 467 1010 / 467 1011 467 1002 / 467 1003 335 2020 / 335 2021 335 2120 / 335 2121 335 2220 / 335 2221 335 2030 / 335 2031 335 2130 / 335 2131 335 2230 / 335 2231 335 2034 / 335 2035 335 2134 / 335 2135 335 2234 / 335 2235 333 5020 / 333 5021 333 5030 / 333 5031 336 4050 / 336 4051 336 4150 / 336 4151 336 4152 / 336 4153 336 5540 / 336 5541 341 1504 341 1508 341 1460 340 1900 / 340 1901 349 2890 / 349 2891 340 1490 340 1480 / 340 1481 567 0185 567 0403 567 0328 567 0404 567 0301 567 0300 469 5620 / 469 5621 469 5600 / 469 5601 469 3400 469 5480 301 0852

Position

Description

a b c d e f g h i j k l m n

Hexagon bolt M12x40-8.8 Zn DIN933 Hexagon bolt M16x40-12.9 A=max3 Zn Hexagon bolt M16x50-12.9 A=max3 Zn Hexagon bolt M16x60-8.8 Zn DIN931 Countersunk bolt M10x33x4-12.9 Zn Countersunk bolt M10x45x4-12.9 Zn Countersunk bolt M16x105-10.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x36x4-12.9-MU-10Zn Countersunk bolt M12x50-8.8-MU Zn D608 Selflocking nut NM12-8 Zn DIN985 Selflocking nut NM16-8 Zn DIN985 Washer D16,5/35x3 Washer D 35/16x5

Three ply steel Chamfered shape

suitable for BS20 suitable for BS20 thick 11 mm instead of 10 mm suitable for BS20 / hardfaced suitable for BS40 suitable for BS40 thick 11 mm instead of 10 mm suitable for BS40 / hard-faced suitable for BS42 suitable for BS42 thick 11 mm instead of 10 mm suitable for BS42 / hardfaced for very rocky conditions for very rocky conditions hardfaced angled, hard-faced, for better penetration in heavy and dry soils

high high

suitable for BK13 suitable for BK13 strengthened suitable for BK13 suitable for BK13 strengthened suitable for BK12 suitable for BK12 suitable for BK13 suitable for BK12

Info

incl. nuts incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

Part no 301 3347 301 3719 301 3774 301 3837 301 5721 301 5722 301 5741 301 5767 301 5785 301 5789 301 5795 303 0934 303 0935 305 7701 305 7703

Plough

Plough bodies DuraL Plough body CS 40

14 17 r a, b, c, d, e, f 20

e, m, k

g 22

18 t

21 19

n, o, p

v s s 2

q v, w

8 r

6 r

10 9

s 7 r

Plough

Plough bodies DuraL Position

Description

1 2 3 4 5 6 6 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Mouldboard slat 1 CS40 606 lg RI / LE Mouldboard slat 2 CS40 720 lg RI / LE Mouldboard slat 3 CS40 830 lg RI / LE Mouldboard slat 4 CS40 878 lg RI / LE Shin C2K RI / LE Wing SB56 RI / LE Wing SB56D RI / LE Wing SB56P RI / LE Share S42A RI / LE Point C2S RI / LE Point C2SP RI / LE Point C2SPS RI / LE Frog CK14 RI / LE Landside A42 120x12x420 Landside A48 120x12x480 Landside A42H 180x12x420 Landside wedge AK10 RI / LE Sword coulter AS2 RI / LE Landside protector SC18 RI / LE Frog-protector SCR11 RI / LE Support CS40 CK14 RI / LE Stay D22x190 RI / LE Stay M20x450-550 19/7 GRD Bolt with lashing M16x40 D13 10.9 Zn

Info

Part no

Three ply steel thick 11 mm instead of 10 mm hard-faced for very rocky conditions hard-faced angled, hard-faced, for better penetration in heavy and dry soils

high

for right and left

Position

Description

a b c d e f g h i j k l m n o p q r s t u v w

Saucer-head screw M16x55-10.9 Zn Saucer-head screw M16x60-10.9 LWN603 Zn Saucer-head screw M16x65-10.9 LWN603 Zn Saucer-head screw M16x70-10.9 LWN603 Zn Saucer-head screw M16x75-10.9 LWN603 Zn Saucer-head screw M16x80-10.9 LWN603 Zn Hexagon bolt M12x40-8.8 Zn DIN933 Hexagon bolt M16x40-12.9 A=max3 Zn Hexagon bolt M16x50-12.9 A=max3 Zn Countersunk bolt M10x33x4-12.9 Zn Countersunk bolt M16x65-10.9 Zn Countersunk bolt M16x80-10.9 Zn Countersunk bolt M16x105-10.9 Zn Countersunk bolt M20x70x8,5-12.9 Zn Countersunk bolt M20x80x8,5-12.9 Zn Countersunk bolt M20x100x8,5-12.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x36x4-12.9-MU-10Zn Selflocking nut NM12-8 Zn DIN985 Selflocking nut NM16-8 Zn DIN985 Washer D16,5/35x3 Washer D 35/16x5

Info

incl. nuts incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

344 4018 / 344 4019 344 4028 / 344 4029 344 4038 / 344 4039 344 4048 / 344 4049 345 1004 / 345 1005 335 2034 / 335 2035 335 2134 / 335 2135 335 2234 / 335 2235 333 5032 / 333 5033 336 4054 / 336 4055 336 4154 / 336 4155 336 4158 / 336 4159 467 1016 / 467 1017 341 1504 341 1450 341 1460 340 1900 / 340 1901 349 2890 / 349 2891 340 1490 340 1480 / 340 1481 469 5632 / 469 5633 469 8370 / 469 8371 567 0219 301 0852

Part no 301 2211 301 2227 301 2242 301 2261 301 2279 301 2292 301 3347 301 3719 301 3774 301 5721 301 5739 301 5740 301 5741 301 5747 301 5750 301 5753 301 5767 301 5785 301 5789 303 0934 303 0935 305 7701 305 7703

26 i

9,10

j h

j magna aliquam erat volutpat. Ut wisi enim ad minim

veniam, quis nostrud exerci tation ullamcorper suscipit

lobortis nisl

m, n

nonummy nibh euismod tincidunt ut laoreet dolore

13 11

i q

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam

7 i q 24

30 e+f

1 5

m, n

l 3

2 28

23 j

26 k

22 g

i, j

Plough body US (US 35 / US 40)

Plough bodies DuraL

Plough

Plough bodies DuraL Position

Description

Info

Part no

1 1 2 3 4 5 5 6 7 7 7 8 8 8 9 10 11 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Mouldboard slat 4 US35 772mm RI / LI Mouldboard slat 4 US40 832mm RI / LI Mouldboard slat 3 US35/40 870mm RI / LI Mouldboard slat 2 US35/40 730mmRI / LI Mouldboard slat 1 US30/35/40 620mm RI / LI Shin B2K RI / LI Shin B2K3 RI / LI Shin B2KH RI / LI Wing SB45 RI / LI Wing SB45D RI / LI Wing SB45P RI / LI Wing SB56 RI / LI Wing SB56D RI / LI Wing SB56P RI / LI Share S41A RI / LI Share S45A RI / LI Point B2S RI / LI Point B2SP RI / LI Point B2PS RI / LE Reversible point S2W RI / LI Frog BK13 RI / LI Frog BK12 RI / LI Landside A42 120x12x420 Landside A36H 180x12x360 Landside A42H 180x12x420 Landside wedge AK10 RI / LI Sword coulter AS2 RI / LI Landside protector SC18 256x175x8 Frog-protector SCR11 RI / LI Support US35+40 BK13 RI / LI Support US RI / LI Stay M20x370-470 44/7 GRD Stay M20x550-650 3/10 GRD Stay M20x370-470 39/5 GRD Stay M20x550-650 3/10 GRD Bolt with lashing M16x40 D13 10.9 Zn Lashing 30x8x70 1xGEB6GRD Zn

suitable for US35 suitable for US40 suitable for US35 / US40 suitable for US35 / US40 suitable for US35 / US40

344 4134 / 344 4135 344 4140 / 344 4141 344 4130 / 344 4131 344 4120 / 344 4121 344 4110 / 344 4111 345 1000 / 345 1001 345 1006 / 345 1007 345 1010 / 345 1011 335 2030 / 335 2031 335 2130 / 335 2131 335 2230 / 335 2231 335 2034 / 335 2035 335 2134 / 335 2135 335 2234 / 335 2235 333 5020 / 333 5021 333 5030 / 333 5031 336 4050 / 336 4051 336 4150 / 336 4151 336 4152 / 336 4153 336 5540 / 336 5541 467 1010 / 467 1011 467 1002 / 467 1003 341 1504 341 1508 341 1460 340 1900 / 340 1901 349 2890 / 349 2891 340 1490 340 1480 / 340 1481 469 5630 / 469 5631 469 5610 / 469 5611 567 0203 567 0304 567 0168 567 0304 301 0852 469 3400

Position

Description

a b c d e f g h i j k l m n

Hexagon bolt M12x40-8.8 Zn DIN933 Hexagon bolt M16x40-12.9 A=max3 Zn Hexagon bolt M16x50-12.9 A=max3 Zn Hexagon bolt M16x60-8.8 Zn DIN931 Countersunk bolt M10x33x4-12.9 Zn Countersunk bolt M10x45x4-12.9 Zn Countersunk bolt M16x105-10.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x50-8.8-MU Zn D608 Selflocking nut NM12-8 Zn DIN985 Selflocking nut NM16-8 Zn DIN985 Washer D16,5/35x3 Washer D 35/16x5

Three ply steel Chamfered shape suitable for US35 suitable for US35, thick 11 mm instead of 10 mm suitable for US35, hard-faced suitable for US40 suitable for US40, thick 11 mm instead of 10 mm suitable for US40, hard-faced for very rocky conditions for very rocky conditions hard-faced angled, hard-faced, for better penetration in heavy and dry soils

high high

for right and left suitable for BK13 suitable for BK12 suitable for BK13 US35 suitable for BK13 US35 suitable for BK12 suitable for BK12

Info

incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

Part no 301 3347 301 3719 301 3774 301 3837 301 5721 301 5722 301 5741 301 5767 301 5785 301 5795 303 0934 303 0935 305 7701 305 7703

Plough

Plough bodies DuraL Plough body W 52

a, b, c, d, e, f j, k, l

11 i

16 g

14 v

m, n, o 9

p x, y

s 7

Position

Description

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Mouldboard W52B RI / LE Shin C2K RI / LE Wing SB45 RI / LE Wing SB45D RI / LE Wing SB45P RI / LE Point C2S RI / LE Point C2SP RI / LE Frog CK13 RI / LE Landside A42 120x12x420 Landside A48 120x12x480 Landside A42H 180x12x420 Landside wedge AK10 RI / LE Sword coulter AS2 RI / LE Landside protector SC18 256x175x8 Frog-protector SCR11 RI / LE Tail piece ST4 RI / LE Strengthening W52 RI / LE Stay M20x450-550 25/60 GRD Stay M24x450-550 20/07 GRD

Position

Description

a b c d e f g h i j k l m n

Info

Three ply steel thick 11 mm instead of 10 mm hard-faced hard-faced

hoch

for right and left

Info

Part no 344 1240 / 344 1241 345 1004 / 345 1005 335 2030 / 335 2031 335 2130 / 335 2131 335 2230 / 335 2231 336 4054 / 336 4055 336 4154 / 336 4155 467 1014 / 467 1015 341 1504 341 1450 341 1460 340 1900 / 340 1901 349 2890 / 349 2891 340 1490 340 1480 / 340 1481 347 6000 / 347 6001 469 5452 / 469 5453 567 0407 567 0406

Part no

Position

Description

301 2211 301 2227 301 2242 301 2261 301 2279 301 2292 301 3719 301 3774 301 5388 301 5739 301 5740 301 5741 301 5747 301 5750

o p q r s t u v w x

Countersunk bolt M20x100x8,5-12.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M10x45-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x36x4-12.9-MU-10Zn Countersunk bolt M12x45-12.9-MU-10 Zn Selflocking nut NM12-8 Zn DIN985 Selflocking nut NM16-8 Zn DIN985 Washer D25/11x5 Zn Washer D16,5/35x3

Washer D 35/16x5

Info incl. nuts incl. nuts incl. nuts incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

Part no 301 5753 301 5767 301 5769 301 5785 301 5789 301 5797 303 0934 303 0935 305 6134 305 7701 305 7703

Plough

Plough body Plough body BU (BU 1B / BU 2B / BU 10B)

11 14

m 9

k c

a b

10 h

12 5

10 9

Plough

Plough body Position

Description

1 1 1 2 2 3 3 4 5 5 6 7 8 8 8 13 13 14 15 16 17 17 18

Mouldboard BU2B RE Mouldboard BU1B RE Mouldboard BU10B RE Shin BU2K RE Shin BU10K RE Frog BU2E RE Frog BU2E RE-V Reversible point S2W RE Wing WG10B RE Wing WG100B RE Point WG2S RE Reversible point S1W RE Share M22S RE Share M24S RE Share M26S RE Landside A1VL Landside A1 Wedge RE 50x15x165 Tail piece, cranked ST3 RE Landside protector SC12 Stay M24x450-550 7/17 GRD Stay M20x370-470 18/23 GRD Heel 4-N-3155 RE

Position

Description

a b c d e f g h i j k l m n

Hexagon bolt M16x45-12.9 A=max3 Zn Hexagon bolt M16x50-12.9 A=max3 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M10x45-12.9-MU-10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x45-12.9-MU-10 Zn Exz-Schr.M16x35-8.8 mit 4kt Selflocking nut NM16-8 Zn DIN985 6kt-Nut M16 DIN934-8 Zn 6kt-Nut M12 DIN934-10 Zn 6kt-Nut M10 DIN934-10 Zn Washer D11/25x2,5 Zn Washer 13x28x2,5 DIN 134 Washer 13/35x5 Zn DIN 6340

Info

BU 1B / BU 2B BU 10B

BU 2B BU 1B / BU 10B M 22W / M 24W BU 2B BU 1B BU 10B for right and left for right and left

for right and left BU 1B / BU 10B BU 2B

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Part no 344 0710 / 344 0711 344 0712 / 344 0713 344 0736 / 344 0737 345 0524 / 345 0525 345 0534 / 345 0535 467 0284 / 467 0285 467 0300 / 467 0301 336 5540 / 336 5541 335 1956 / 335 1957 335 1958 / 335 1959 336 3986 / 336 3987 336 5534 / 336 5535 333 3810 / 333 3811 333 3812 / 333 3813 333 3834 / 333 3835 340 1570 341 1826 203 1156 / 203 1161 347 5288 / 347 5289 340 1550 567 0220 567 0202 341 9312 / 341 9313

Part no 301 3734 301 3774 301 5767 301 5769 301 5785 301 5794 301 5800 303 0935 303 1015 30310012 30310052 305 6132 305 6135 305 6167

Plough

Plough body Plough body NBU (NBU 1B / NBU 2B)

g f

11 14

m 9

c e

a b

10 h

12 5

e 10

9 6

f 11 j

Plough

Plough body Position

Description

Info

Part no

1 1 2 3 3 4 5 5 6 7 8 8 13 13 14 14 15 16 17 18

Mouldboard NBU1B RI / LE Mouldboard NBU2B RI / LE Shin BU2K RI / LE Frog BU2E RI / LE Frog BU2E RI / LE Reversible point S2W RI / LE Wing WG100B RI / LE Wing WG10B RI / LE Point WG2S RI / LE Reversible point S1W RI / LE Share M24S RI / LE Share M22S RI / LE Landside A1VL Landside A1 Wedge RI / LE Tail piece, cranked ST3 RI / LE Landside protector SC12 RI / LE Heel 4-N-3155 Heel 4-N-3155 SchleifstÃ¼ck 4N 31555 RI / LE

NBU 1B NBU 2B

344 0718 / 344 0719 344 0716 / 344 0717 345 0524 / 345 0525 467 0284 / 467 0285 467 0300 / 467 0301 336 5540 / 336 5541 335 1958 / 335 1959 335 1956 / 335 1957 336 3986 / 336 3987 336 5534 / 336 5535 333 3812 / 333 3813 333 3810 / 333 3811 340 1570 341 1826 203 1156 / 203 1161 349 2900 / 349 2901 347 5288 / 347 5289 340 1550 567 0200 341 9312 / 341 9313

Position

Description

a b c d e f g h i j k l m n

reinforced NBU 1B NBU 2B

NBU 1B NBU 2B for left and right for left and right

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Part no 301 3734 301 3774 301 5767 301 5769 301 5785 301 5794 301 5800 303 0935 303 1015 30310012 30310052 305 6132 305 6135 305 6167

Plough

Mouldboard supports

Mouldboard supports Description Stay M20x310-410 00/06 for mouldboard BS40, BS40S, BS42, BS42S

Stay M20x370-470 08/14 for mouldboard D50, D50B

Stay M24x340-440 14/06 for mouldboard C40, C40B, C40KU, C40KUB

Stay M24x340-440 08/29 for mouldboard B35B, B40B

Stay M20x370-470 39/05 for mouldboard US35, US40

Stay M20x340-440 00/17 for mouldboard B20, B25, B30, B35, B40, B20B, B25B B25HB, B30B, B35B, B40B, BUS1B, K30, K30B Stay M20x340-440 08/29 for mouldboard B20, B25, B30, B35, B40, B20B, B25B B25HB, B30B, B35B, B40B Stay M20x340-440 26/13 for mouldboard BS20, BS20S

Stay M20x340-440 39/06 for mouldboard BS40, BS40S, BS42, BS42S

Stay M20x340-440 18/23 for mouldboard BU3B,'C32, C32B, KU1, KU2, KU3, KU1B, KU10B Stay M20x370-470 18/23 for mouldboard BU2B

Stay M20x370-470 46/23 for mouldboard C40, C40B, C40KU

Individual mouldboard support parts Screw M20x140 RK 00° Zn Screw M20x170 LK 08° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 08° Zn Screw M20x200 LK 14° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M24x170 RG 14° Zn Screw M24x170 LK 08° Zn Turnbuckle sleeve M24x165 Zn Hexagon nut M24 DIN934-8 Zn Screw M24x170 RG 08° Zn Screw M24x170 LK 29° Zn Turnbuckle sleeve M24x165 Zn Hexagon nut M24 DIN934-8 Zn Screw M20x170 RG 39° Zn Screw M20x200 LK 05° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 00° Zn Screw M20x170 LK 20° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 08° Zn Screw M20x170 LK 29° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 26° Zn Screw M20x170 LK 13° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 39° Zn Screw M20x170 LK 08° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 00° Zn Screw M20x170 LK 17° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 00° Zn Screw M20x200 LK 17° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x200 RK 17° Zn Screw M20x170 LK 17° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn

Part no 567 0148 302 8335 302 8402 302 8887 303 0978 567 0150 302 8411 302 8417 302 8887 303 0978 567 0156 302 8429 302 8428 302 8888 303 1019 567 0157 302 8446 302 8445 302 8888 303 1019 567 0168 302 8415 302 8416 302 8887 303 0978 567 0172 302 8357 302 8404 302 8887 303 0978 567 0183 302 8411 302 8406 302 8887 303 0978 567 0184 302 8414 302 8403 302 8887 303 0978 567 0185 302 8415 302 8402 302 8887 303 0978 567 0200 302 8357 302 8356 302 8887 303 0978 567 0202 302 8357 302 8360 302 8887 303 0978 567 0205 302 8372 302 8356 302 8887 303 0978

Plough

Mouldboard supports Mouldboard supports Description Stay M20x400-500 60/17 for mouldboard W1B, W11B, W2B, W21B

Stay M20x400-500 10/17 for mouldboard MS2

Stay M20x450-550 19/08 for mouldboard CS40

Stay M24x450-550 07/17 for mouldboard BU1B, BU10B

Stay M24x450-550 18/12 for mouldboard WL1B

Stay M20x650-750 15/50 for mouldboard

Stay M20x370-470 55/67 for mouldboard C40B, C40KU, C40KUB

Stay M20x650-750 15/08 for mouldboard BS40, BS40S, BS42, BS42S

Stay M20x340-440 43/01 for mouldboard BS40, BS40I, BS40S, BS42, BS42S

Stay M20x550-650 03/10 for mouldboard BS20, US35, US40

Stay M20x340-440 26/05 for mouldboard BS20

Stay M20x340-440 10/03 for mouldboard C30, C32, C40, C30B, C32B, C40B W30, W30B Stay M20x450-550 12/22 for mouldboard C40

Individual mouldboard support parts Screw M20x200 RK 17° Zn Screw M20x200 LK 17° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x200 RK 17° Zn Screw M20x200 LK 17° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x250 RK 19° Zn Screw M20x170 LG 08° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M24x250 RG 20°Zn Screw M24x200 LK 08° Zn Turnbuckle sleeve M24x165 Zn Hexagon nut M24 DIN934-8 Zn Screw M24x250 RG 17° Zn Screw M24x200 LK 00° Zn Turnbuckle sleeve M24x165 Zn Hexagon nut M24 DIN934-8 Zn Screw M20x480 RK 15° V Zn Screw M20x170 LK 50° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x200 RK 55° Zn Screw M20x170 LK 67° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x480 RK 15° V Zn Screw M20x170 LG 08° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 39° Zn Screw M20x170 LK 08° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x350 RK 00° V Zn Screw M20x170 LG 17° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 26° Zn Screw M20x170 LK 08° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x170 RG 00° Zn Screw M20x170 LK 08° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x250 RK 19° Zn Screw M20x200 LK 17° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn

Part no 567 0206 302 8372 302 8360 302 8887 303 0978 567 0210 302 8372 302 8360 302 8887 303 0978 567 0219 302 8452 302 8451 302 8887 303 0978 567 0220 302 8457 302 8441 302 8888 303 1019 567 0222 302 8366 302 8364 302 8888 303 1019 567 0282 302 8422 302 8454 302 8887 303 0978 567 0292 302 8427 302 8410 302 8887 303 0978 567 0300 302 8422 302 8451 302 8887 303 0978 567 0301 302 8415 302 8402 302 8887 303 0978 567 0304 302 8371 302 8355 302 8887 303 0978 567 0305 302 8414 302 8402 302 8887 303 0978 567 0314 302 8357 302 8402 302 8887 303 0978 567 0320 302 8452 302 8360 302 8887 303 0978

Plough

Mouldboard supports Mouldboard supports Description Stay M20 19/62grd 2.b3 for mouldboard B35B, B40B

Stay M20x650-750 02/17 for mouldboard BS40, BS40S, BS42, BS42S

Stay M20x550-650 7/15 for mouldboard BS20, BS20S, US35, US40

Stay M20x680-780 15/55 for mouldboard BS42I

Stay M24x470-570 22/8 for mouldboard TS46

Stay M24x550-650 2/15 for mouldboard TS46

Stay M24x450-550 42/07 for mouldboard BS40I, BS42I, US40I

Stay M24x700-840 15/55 for mouldboard BS40I, BS42I

Stay M24x570-670 07/60 for mouldboard B35B, B40B

Stay M24x450-550 20/08 for mouldboard W52, W52B

Stay M20x450-550 25/60 for mouldboard W52, W52B

Str.bl.st. M24 570-670 15/60 for mouldboard B35b, B40B

Individual mouldboard support parts Screw M20x350 RK 00° V Zn Screw M20x170 LK 65° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x480 RK 02° V Zn Screw M20x170 LG 17° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x350 RK 08° V Zn Screw M20x170 LG 15° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M20x480 RK 15° V Zn Screw M20x200 LK 60° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M24x170 RG 22° Zn Screw M24x170 LG 08° Zn Turnbuckle sleeve M24x330 Zn Hexagon nut M24 DIN934-8 Zn Screw M24x250 RG 02° Zn Screw M24x170 LG 15° Zn Turnbuckle sleeve M24x330 Zn Hexagon nut M24 DIN934-8 Zn Screw M24x250 RK 42° Zn Screw M24x200 LK 08° Zn Turnbuckle sleeve M24x165 Zn Hexagon nut M24 DIN934-8 Zn Screw M24x370 RK 15° Zn Screw M24x200 LK 55° Zn Turnbuckle sleeve M24x330 Zn Hexagon nut M24 DIN934-8 Zn Screw M24x370 RK 08° Zn Screw M24x200 LK 60° Zn Turnbuckle sleeve M24x165 Zn Hexagon nut M24 DIN934-8 Zn Screw M24x250 RG 20°Zn Screw M24x200 LK 08° Zn Turnbuckle sleeve M24x165 Zn Hexagon nut M24 DIN934-8 Zn Screw M20x250 RK 25° Zn Screw M20x200 LK 60° Zn Turnbuckle sleeve M20x165 Zn Hexagon nut M20 DIN934-8 Zn Screw M24x370 RK 15° Zn Screw M24x200 LK 60° Zn Turnbuckle sleeve M24x165 Zn Hexagon nut M24 DIN934-8 Zn

The most common mouldboard supports are shown here. Others are available. The bending of the screws can be curved to the required degree during assembly.

Part no 567 0324 302 8371 302 8409 302 8887 303 0978 567 0328 302 8421 302 8355 302 8887 303 0978 567 0345 302 8424 302 8401 302 8887 303 0978 567 0370 302 8422 302 8442 302 8887 303 0978 567 0400 302 8448 302 8447 302 8886 303 1019 567 0401 302 8450 302 8449 302 8886 303 1019 567 0403 302 8439 302 8441 302 8888 303 1019 567 0404 302 8435 302 8437 302 8886 303 1019 567 0405 302 8443 302 8444 302 8888 303 1019 567 0406 302 8457 302 8441 302 8888 303 1019 567 0407 302 8456 302 8442 302 8887 303 0978 56710001 302 8435 302 8444 302 8888 303 1019

Plough

Shearbolts Shearbolts mounted reversible ploughs Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Description Hexagon bolt M 10x55-8.8 Hexagon bolt M 12x65-10.9 Hexagon bolt M 12x70-8.8 Hexagon bolt M 12x70-10.9 Hexagon bolt M 12x70-12.9 Hexagon bolt M 12x57-8.8 Hexagon bolt M 12x75-10.9 Hexagon bolt M 12x90-10.9 Hexagon bolt M 14x60-8.8 Hexagon bolt M 14x65-8.8 Hexagon bolt M 14x70-10.9 Hexagon bolt M 14x75-8.8 Hexagon bolt M 14x80-5.6 Hexagon bolt M 14x80-8.8 Hexagon bolt M 14x85-10.9 Hexagon bolt M 14x90-8.8 Hexagon bolt M 16x60-8.8 Hexagon bolt M 16x100-12.9 Hexagon bolt M 16x100-5.6 Hexagon bolt M 16x100-8.8 Allen screw M10x70-12.9 Hexagon bolt M x12x55-8.8

Serie Type Juwel 7 / 7 V Juwel 7 T / 7 VT Juwel 8 / 8 V Juwel 8 T / VT EurOpal 5 / VariOpal 5 EurOpal 5 X / VariOpal 5 X EurOpal 6 / VariOpal 6 EurOpal 6 X / VariOpal 6 X EurOpal 7 / VariOpal 7 EurOpal 7 X / VariOpal 7 X EurOpal 8 / VariOpal 8 EurOpal 8 X / VariOpal 8 X EurOpal 9 / VariOpal 9 EurOpal 9 X / VariOpal 9 X VariTansanit 8 VariEurOpal 5 VariEurOpal 7 VariEurOpal 7 X VariEurOpal 8 VariEurOpal 8 X VariEurOpal 9 VariEurOpal 9 X Opal 90 Opal 080 Opal 090 Opal X 090 VariOpal 100 / VariOpal X 100 Opal 110 Opal X 110 (25)

Stalk thickness 30 30 30 / 35 30 30 30 30 30 30 30 30 30 35 / 40 35 30 30 30 30 35 35 35 40 35 25 22 25 22 30 25 25 / 30

Info

Position 12 11 12 / 15 11 3 2 3 2 7 11 7 11 15 / 18 11 12 2 2 5 12 / 14 5 12 15 11 17 22 9 22 2 10 9/5

Serie Type Opal 120 Opal X 120 (25) VariOpal 120 / VariOpal 121 VariOpal X 120 / VariOpal X 121 Opal 140 Opal X 140 VariOpal 140 / VariOpal 141 VariOpal X 140 VariOpal X 140 (30) / VariOpal X 141 (30) Opal 160 Opal X 160 VariOpal 160 VariOpal 160 (I 40) VariOpal X 160 Opal 180 Opal RA Opal RLA LeichtOpal SchwerOpal Sekurax Rodonit Granat 90 Granat 110 Granat X 110 Granat X 110 (30) Granat 140 Granat X 140 Granat X 140 (30) Saphir 90

Part no 301 3251 301 3399 301 3406 301 3408 301 3409 301 3422 301 3424 301 3456 301 3584 301 3588 301 3595 301 3596 301 3602 301 3604 301 3607 301 3620 301 3837 301 3994 301 3995 301 3997 301 5813 301 3384

Stalk thickness 25 25 / 30 30 30 35 30 35 30 30 35 30 35 40 30 / 35 40

Position 10 9 / 11 2 5 12 11 / 5 12 / 14 11/ 5 5 12 11 / 5 12 / 14 15 11 / 11 15 13, 16 6, 8 1, 21 19, 20 13, 16 15 9 10 9 5 12 11 5 17

Plough

Shearbolts Shearbolts semi - mounted reversible ploughs Position 1 2 3 4 5 6 7 8 9

Serie Type Diamant 11 / Diamant 11 V Diamant 11 T / Diamant 11 VT Diamant 12 V Diamant 12 VT Diamant 16 / Diamant 16 V Diamant 16 T / Diamant 16 VT EuroTitan / VariTitan EuroTitan X / VariTitan X EuroDiamant 10 / VariDiamant 10 EuroDiamant 10 X / VariDiamant 10 X EuroDiamant 8 EuroDiamant 8 X EuroDiamant 9 VariDiamant 9 VariDiamant 9 EuroDiamant 9 X / VariDiamant 9 X

Description Hexagon bolt M 12x70-12.9 Hexagon bolt M 12x75-10.9 Hexagon bolt M 14x70-10.9 Hexagon bolt M 14x75-8.8 Hexagon bolt M 14x80-8.8 Hexagon bolt M 14x85-10.9 Hexagon bolt M 14x90-8.8 Hexagon bolt M 16x90-8.8 Hexagon bolt M 16x100-12.9

Stalk thickness 35 / 40 30 35 / 40 30 35 / 40 30 35 35 35 / 40 35 30 30 35 35 40 35

Part no 301 3409 301 3424 301 3595 301 3596 301 3604 301 3607 301 3620 301 3977 301 3994

Position 6/9 3 6/9 3 6/9 3 6 3 6 3 2 3 6 4/5 6 3

Serie Type VariDiamant 160 VariDiamant X 160 Diamant 140 Diamant X140 Diamant 180 / Diamant S 180 Diamant X 180 Diamant SX 180 VariTurmalin 9 VariTurmalin 9 X VariTurmalin 160 VariTurmalin X 160 Turmalin Ă&#x153; Turmalin 220 Turmalin X 220 VariDiamant 160

Stalk thickness 35 35 35 30 40 35 35 35 35 35 35 40 40 35 40

Position 4/5 3 4 3 6 4 3 4 3 4 3 8 7 3/4 6

Mounting screws legs Position 1 2 3 4 5 6 7 8

Description Snipe screw M16x55-10.9 Zn Snipe screw M16x65-10.9 Zn Snipe screw M16x70-10.9 Zn Snipe screw M16x80-10.9 Zn Snipe screw M16x100-10.9 Zn Countersunk bolt M20x70x8,5-12.9 Zn Countersunk bolt M20x80x8,5-12.9 Zn Countersunk bolt M20x100x8,5-12.9 Zn

Info Stalk thickness=25 mm Stalk thickness=30 mm Stalk thickness=35 mm Stalk thickness=40 mm Stalk Stalk thickness=25-30 mm Stalk thickness=35-40 mm Stalk

Part no 301 2211 301 2242 301 2261 301 2292 301 2312 301 5747 301 5750 301 5753

Plough

Additional tools FOR EUROPAL, VARIOPAL, EUROTITAN AND VARITITAN

FOR JUWEL AND DIAMANT

Skimmers D 1 with point S 270

Skimmers DS 1 with point S 270

for light to heavy soils, ploughing of stubble, grasslands*, etc. Individual adjustment possible due to wide range of settings

Shares: S190 (Standard), S270/S360 (Option) For extremely sticky soils, the plough bodies are also available as synthetic version!

Skimmers D 0 with point S 270 for light to heavy soils, grasslands* etc. for ploughing fields with large amounts of trash or vegetation. Individual adjustment possible due to wide range of settings

Shares: S205 (Standard), S245 (Option)

Skimmers DS 0 for light to heavy soils, grasslands* etc. for ploughing fields with large amounts of trash or vegetation. Individual adjustment possible due to wide range of settings Shares: S205 (Standard), S245/S370 (Option)

Shares: S270(Standard), S360 (Option) *for ploughing grassland, tailpieces are recommended!

Skimmers M 3

Skimmers MS 3

for light to heavy soils, for ploughing fields with large amounts of trash or vegetation (intermediate crops, maize straw, etc.). Individual adjustment possible due to wide range of settings

Shares: S190 (Standard), S270 (Option)

Shares: S205 (Standard), S245/S370 (Option)

Skimmers M 2 with point S 360

Skimmers MS 2

for light to heavy soils, for ploughing fields with large amounts of trash or vegetation (intermediate crops, maize straw, etc.). Individual adjustment possibilities due to wide range of settings Shares: S270 (Standard), S190/S360 (Option) For extremely sticky soils, the plough bodies are also available as synthetic version!

Skimmers MS 1 for light to heavy soils, for ploughing fields with large amounts of trash or vegetation (intermediate crops, maize straw, etc.). Individual adjustment possible due to wide range of settings Shares: S245 (Standard), S370 (Option) For extremely sticky soils, the plough bodies are also available as synthetic version!

Plough

Additional tools DuraMAXX Skimmer with throw angle adjustment at the body h k

3 13

d b

h h

3 12

i, j

f 8

13 n

h 4 g

i, j

Position

Description

Info

Part no

1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18

Frog DE 50x30 RI / LE Frog DE 50x30 1xM16 RI / LE Share S245 RI / LE Share S370 RI / LE Share S205 RI / LE Mouldboard M3 RI / LE Mouldboard D0 RI / LE Mouldboard MS1 RI / LE Mouldboard MS1 KU RI / LE Mouldboard MS1 KU RI / LE Wedge 17x70x85 9GRD Locking bar DE 10x78x95 Zn Pin with grip D12x74,5/115 Zn Pin with grip D12x95,5/135 Zn Tail piece STD1 60x6x230 Base 6x33x147 2xD12-87 Zn Mouldboard D1 RI / LE

for flat stalk for flat stalk, Adjustable mouldboard plate

457 0846 / 457 0847 45710004 / 45710005 336 3722 / 336 3723 336 3726 / 336 3727 336 3728 / 336 3729 347 0620 / 347 0621 347 0654 / 347 0655 347 0660 / 347 0661 347 0662 / 347 0663 34710002 / 34710003 457 0850 45710006 313 8153 31310003 347 3650 45710007 347 0650 / 347 0651

plastic plastic

Position

Description

Part no

a b c d e f g h i j k l m n

Hexagon bolt M16x30-8.8 Zn DIN933 Countersunk bolt M10x45x4-12.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M10x45-12.9-MU-10 Zn Countersunk bolt M10x25-8.8-MU Zn D608 Countersunk bolt M10x35-8.8-MU Zn Hexagon nut M16 DIN936-8 Zn Washer D11/25x2,5 Zn Washer D16,5/35x3 Graupappe Washer D 35/16x5 Graupappe Washer 13/24x2,5 St-Zn DIN125 Securing pin 4,5 Securing pin 5x32 d1=4,5 Zn Cap GPN 300V142- D16 RAL5015

301 3682 301 5722 301 5767 301 5769 301 5771 301 5773 303 1020 305 6132 305 7701 305 7703 305 8580 311 9565 31110015 323 8072

Info

incl. nuts incl. nuts incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

Plough

Additional tools DuraL Skimmer i

k, l

5 i

d j

7 f

3 e

Position

Description

Info

Part no

1 1 2 3 4 5 6 7 7 8 9 10 11 12 13

Frog 50x30-10 RI / LE Frog 50x30-14 RI / LE Share S270 RI / LE Share S190 RI / LE Share S360 Mouldboard M2 RI / LE Mouldboard M3 RI / LE Mouldboard D1 RI / LE Mouldboard D1KU RI / LE Mouldboard D0 RI / LE Mouldboard M2KU RI / LE Tail piece STD1 60x6x230 Tail piece STD2 RI / LE Angle 30x8x89 Pin with grip D14x61/103 Zn

for flat stalk for flat stalk

457 0840 / 457 0841 457 0842 / 457 0843 336 3710 / 336 3711 336 3720 / 336 3721 336 3724 347 0600 / 347 0601 347 0620 / 347 0621 347 0650 / 347 0651 347 0652 / 347 0653 347 0654 / 347 0655 347 0604 / 347 0605 347 3650 347 3652 / 347 3653 469 3402 313 8158

Position

Description

a b c d e f g h i j k l m n

Hexagon bolt M12x70-8.8 Zn DIN931 Countersunk bolt M10x33x4-12.9 Zn Countersunk bolt M10x45x4-12.9 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M10x25-8.8-MU Zn D608 Countersunk bolt M10x35-8.8-MU Zn Selflocking nut NM12-8 Zn DIN985 Washer vierk. 13,5 DIN436 Zn Washer D11/25x2,5 Zn Washer D25/11x5 Zn Washer D16,5/35x3 Washer D 35/16x5 Washer 13/24x2,5 St-Zn DIN125 Securing pin 4,5

for right and left

plastic plastic for right and left M2

Info

incl. nuts incl. nuts incl. nuts

Cardboard shim, 3 mm thick Cardboard shim, 5 mm thick

Part no 301 3406 301 5721 301 5722 301 5767 301 5771 301 5773 303 0934 305 5903 305 6132 305 6134 305 7701 305 7703 305 8580 311 9565

Plough

Additional tools for Round stalks Skimmer e

d 14

b e

c 13

12 e

7 1,2

c e

10 c

5 c

4 c

Position

Description

Info

Part no

1 2 3 4 5 6 7 8 9 10 10 11 12 13 14

Frog D35-40 RI / LE Frog D40-45 RI / LE Share S150 RI / LE Share S190 RI / LE Share S185 RI / LE Share S270 RI / LE Share S360 Mouldboard M1 RI / LE Mouldboard M3 RI / LE Mouldboard D1 RI / LE Mouldboard D1KU RI / LE Mouldboard D0 RI / LE Mouldboard M2 RI / LE Tail piece STD1 60x6x230 Tail piece STD2 RI / LE

for Round stalks for Round stalks

457 0820 / 457 0821 457 0830 / 457 0831 336 3712 / 336 3713 336 3720 / 336 3721 336 3714 / 336 3715 336 3710 / 336 3711 336 3724 347 0564 / 347 0565 347 0620 / 347 0621 347 0650 / 347 0651 347 0652 / 347 0653 347 0654 / 347 0655 347 0600 / 347 0601 347 3650 347 3652 / 347 3653

for right and left

plastic

for right and left

Position

Description

Part no

a b c d e

Hexagon bolt M16x1,5x35-10.9 Sp.Zn Countersunk bolt M10x33-12.9-MU-10 Zn Countersunk bolt M10x25-8.8-MU Zn D608 Washer D25/11x5 Zn Washer 13/24x2,5 St-Zn DIN125

301 3666 301 5767 301 5771 305 6134 305 8580

Info incl. nuts incl. nuts

Plough

Additional tools Trashboard DuraL d

2 1

b b Position

Description

Part no

1 2

Trashboard E4 RI / LE Holder with support E4 RI / LE

347 0860 / 347 0861 457 5204 / 457 5205

Position

Description

a b c d

Hexagon bolt M16x70-8.8 Zn DIN933 Countersunk bolt M10x33-12.9-MU-10 Zn Hexagon nut M16 DIN936-8 Zn M16 DIN936-8 Zn Washer D11/25x2,5 Zn

Info

Part no 301 5066 301 5767 303 1020 305 6132

incl. nuts

Trashboard DuraMAXX a

d e

c 1 b Position

Description

Part no

1 2 3

Trashboard E4 RI / LE Holder DM1 E4 RI / LE Clamp plate

347 0860 / 347 0861 457 5218 / 457 5219 459 1194

Position

Description

a b c d e

Saucer-head screw M16x80-10.9 LWN603 Zn Countersunk bolt M10x33-12.9-MU-10 Zn Selflocking nut NM16-8 Zn DIN985 Washer D11/25x2,5 Zn Washer 17/40x6 7349 200HV Zn

Info incl. nuts

Part no 301 2292 301 5767 303 0935 305 6132 305 6161

Plough

Additional tools

Wide furrow cutter for soil-protecting ploughing with wide wheels in the furrow

Subsoiler adjustable without tools (DuraL) Quick depth adjustment or detachment.

Subsoiler adjustable without tools (DuraMAXX) Quick depth adjustment or detachment.

Plough

Additional tools Wide furrow cutter (DuraMAXX / DuraL) 1

Position

Description

1 2 3

Knife for wide furrows RI / LE Holder HBFM 2 RI / LE Holder HBFM 3 RI / LE

Position

Description

a b c

Hexagon bolt M12x40-8.8 Zn DIN933 Countersunk bolt M12x45-12.9-MU-10 Znw Countersunk bolt M16x60-10.9 4KT Zn

Info

Part no

suitable for DuraL suitable for DuraMAXX

349 2860 / 349 2861 457 2960 / 457 2961 45710008 / 45710009

Info

Part no

Position

Description

incl. nuts

301 3347 301 5794 301 6147

d e f

Selflocking nut NM12-8 Zn DIN985 Selflocking nut NM16-8 Zn DIN985 Washer 17/30x3 7089 200HV Zn

Info

Part no 303 0934 303 0935 305 6141

Subsoiler (DuraMAXX) 5 c 4 f b 3 d 2 e

Position

Description

Part no

1 2 3 4 5

Tine D30x360-M20 Stalk guard D30/26x48 RI / LE Stalk for subsoiler RI / LE Holder RI / LE Locking bar

351 3201 351 3202 / 351 3203 351 3222 / 351 3223 457 4508 / 457 4509 321 2603

Position

Description

a b c

Countersunk bolt M16x60-10.9 4KT Zn Selflocking nut NM16-8 Zn DIN985 Hexagon nut M20x1,5 DIN936 Zn

Info

Part no 301 6147 303 0935 303 0965

Plough

Additional tools DuraL Subsoiler straight stalk 4

b a

d c

Position

Description

Part no

1 2 3 4 5

Tine D30x360-M20 Stalk guard D30/26x48 RI / LE Stalk 60x20x415-A Carrier RI / LE Share UGS3 RI / LE

351 3201 351 3202 / 351 3203 351 3200 457 4600 / 457 4601 351 3300 / 351 3301

Position

Description

Part no

Position

Description

Part no

a b

Hexagon bolt M16x60ls35xb20-10.9Zn Selflocking nut NM16-8 Zn DIN985

301 3779 303 0935

c d

Hexagon nut M20 DIN934-8 Zn spring ring 20 DIN127 Zn

303 0978 305 9908

Subsoiler curved stalk 4

g c

h e

a f

5 b

3 2 1

Position

Description

1 2 3 4 5 5

Tine D30x360-M20 Stalk guard D30/26x48 RI / LE Stalk for subsoiler RI / LE Pin with grip D16x52/112 V Zn Bracket UD6-70 RI / LE Bracket UD6-80 RI / LE

Part no

for leg with 70 mm for leg with 80 mm

351 3201 351 3202 / 351 3203 351 3220 / 351 3221 313 8152 457 4606 / 457 4607 457 4602 / 457 4603

Position

Description

Part no

Position

Description

Part no

Saucer-head screw M16x100-10.9 LWN603Zn Countersunk bolt M20x100x8,5-12.9 Zn Selflocking nut NM16-8 Zn DIN985 Selflocking nut NM20-8 Zn DIN985

301 2312

e f g h

Hexagon nut M20 DIN934-8 Zn Washer 21x37x3 ISO7089 Zn Washer 17/40x6 7349 200HV Zn Retaining ring Di41x3 A2

303 0978 305 6012 305 6161 305 8551

b c d

Info

301 5753 303 0935 303 0936

Plough

Additional tools Disc

Description

Info

Bolt circle (E)

Part no

Disc D450/72x5

Plain

450 / 72

349 0036

Mounting screw Countersunk bolt M8x20-10.9 Zn DIN7991

Disc D450/72x5 Z

Notched, corrugated

301 6101

450 / 72

Mounting screw Countersunk bolt M8x20-10.9 Zn DIN7991

Disc D500/72x5

Plain

301 6101

500 / 72

Mounting screw Countersunk bolt M8x20-10.9 Zn DIN7991

Disc D500/72x5 Z

Notched, corrugated

Plain

500 / 72

Notched, corrugated Mounting screw Countersunk bolt M10x30-10.9 Zn D7991

349 0039

301 6101

450 / 100

Mounting screw Countersunk bolt M10x30-10.9 Zn D7991

Disc D450/100x4,5-Z

349 0038

301 6101

Mounting screw Countersunk bolt M8x20-10.9 Zn DIN7991

Disc D450/100x4,5

349 0037

349 0031

301 6123

450 / 100

349 0043

301 6123

Plough

Additional tools Disc

Description

Info

Bolt circle (E)

Part no

Disc D495/100x4

Plain

495 / 100

349 0027

Mounting screw Countersunk bolt M10x30-10.9 Zn D7991

Disc D500/100x5 G

Plain, corrugated

301 6123

500 / 100

Mounting screw Countersunk bolt M10x30-10.9 Zn D7991

Disc D500/100x5-Z

Notched, corrugated

301 6123

500 / 100

Mounting screw Countersunk bolt M10x30-10.9 Zn D7991

Disc D590/100x6 GEZ

Notched, corrugated

Plain, corrugated Mounting screw Countersunk bolt M10x30-10.9 Zn D7991

349 0042

301 6123

590 / 100

Mounting screw Countersunk bolt M10x30-10.9 Zn D7991

Disc glatt 590x100x6mm

349 0029

349 0050

301 6123

590 / 100

349 0051

301 6123

Plough

Additional tools Disc coulter bearing - welded axles / 100 mm hole 7 6 3/5 8

4 3 2 1

9 Position

Description

1 2 3 4 5 6 7 8 1-8 1-8 9

Hub 668 A Oil seal 40x55x7 BA Bearing 30206 Securing ring 62x2 DIN472 Bearing 32007X Castle nut DIN937-M24x1,5-22H Seal D120/65x1,6 Peg 3,2x40 DIN94-St Zn Bearing 668A 1x30206+32007X Bearing 668A 2x30206 Grease nipple LAM 6 DIN71412

Info

for spring-mounted disc coulter for rigid disc coulter

Part no 447 8882 323 8032 319 9116 305 8924 319 9166 303 0193 323 7641 311 7613 547 8882 547 8883 323 6345

Disc coulter bearing - screwed axles / 100 mm hole

Position

Description

1 2 3 4 5 6 7 1-7

Securing ring 62x2 DIN472 Bearing 30/62/30 RSR Cap D79/75 30x8 Zn Race ring D45/30x20,5 Sealing RWDR 45x70x14 Axle D30x95 M24x1,5 Zn Bearing housing D120/62x56,4/100 Bearing unit D30x100 M24x1,5

Info

Part no 305 8924 319 8760 323 0418 323 5011 323 8301 455 0310 455 5145 555 4512

Plough

Additional tools Bearing for Coulter disc â&#x20AC;&#x201C; welded axles / 72 mm hole 7 6 3 8

4 3 2 1

Position

Kurzbeschreibung

1 2 3 4 5 6 7 8

Hub D52 6xM8-D72 Zn Oil seal 35x52x7 BA Tapered roller bearing 30205X Retaining ring 52x2 DIN472 Grease nipple AM10x1 DIN71412 Castle nut DIN937-M20x1,5 Seal D90x72x1 Peg 3,2x40 DIN94-St Zn

Info

Bestellnummer 447 8879 323 8018 319 9380 305 8902 323 6348 303 0191 323 7642 311 7613

Notes

io t a d i l o s n o c e R

Reconsolidation Packers

Packer wheel

Description

Diameter (mm)

Packer wheel Outside/Inside

700

Packer wheel Outside/Inside

700

Packer wheel Centre and for extension

700

Packer wheel Centre and for extension

700

Packer wheel Inside

900

Packer wheel Inside

900

Packer wheel Outside, Centre and for extension

900

Packer wheel Outside, Centre and for extension

900

Packer wheel with beading Outside, Centre and for extension

900

Fastening

Hub length (mm)

Angle measure (Â°)

Part no

125

423 9091 301 4137 301 3837 301 0935

125

423 9093 301 4137 301 3868 303 0935

200

423 9092 301 4137 303 0935

200

423 9094 301 4137 303 0935

77,5

423 9106 301 3978 303 0971

423 9108 301 3978 303 0971

250

423 9107 30110084 30110083 303 0971

250

423 9109 30110084 30110083 303 0971

250

423 9110 30110083 30110084 303 0971

Fixing screw, inside Fixing screw, outside Selflocking nut

Fixing screw Selflocking nut

Fixing screw, inside Selflocking nut

Fixing screw, outside Fixing screw, mitte Selflocking nut

Fixing screw, mitte Fixing screw, outside Selflocking nut

Reconsolidation

Packers

Rubber tape Description Rubber tape 30x10x930 Rubber tape 30x10x1050 Rubber tape 30x10x1480 Rubber tape 30x10x1500 Rubber tape 30x10x1850

Roller star

Part no WEP 70 WEP 90 WEP 70, from 1,5 m Working width WDP 70, to 1,4 m Working width WDP 90

331 5025 331 5030 331 5034 331 5035 331 5040

Rubber tape 30x10x1610

331 5005

Plate 60x6x90 zn

459 4565

U-bolt M10/30x35 (120) Zn

301 7780

Chain link 8x35 B=35

331 6226

Selflocking nut NM10-8 DIN985 Zn

303 0933

Description

Diameter (mm)

Info

Part no

Roller star D330x80 Roller star D330x55

330 330

Inside Outside

423 9005 423 9007

Reconsolidation Packers

Flexpack

Position

Description

Part no

1 2 3 4 5 6

Hexagon bolt M16x110-10.9 Zn Cap M42x2 SW24 Grooved ball bearing 203KRR-016,3/C3 Tube D17/25x22 Zn Packer wheel D600/40x85 3SP Hexagon nut M16 DIN934-10 Zn

30110467 32310048 31910005 317 6681 42310013 303 0971

s Power Harrow

CORE ARGUMENTS yy Tine lengths between 30 and 38 cm yy Optional hard-facing for maximum service life yy LEMKEN quick-change tines for greater flexibility yy Wide range of tines for optimal results

Power Harrows

Blade tine

15 11

16 14 13

23 17

52 53 39

54 Position

Description

7 8 9

Zirkon 7 Blade tine MZ28PB RE Blade tine MZ28PB LI Blade tine MZ28B RE Blade tine MZ28B LI Threaded plate 102/32/16 2xM16x1,5 Hexagon bolt M16x1,5x50ls23xb22-10.9 Zn Zirkon 8 Blade tine SZ32 RE Blade tine SZ32 LI Blade tine SZ32P RE

Blade tine SZ32P LI

11 12 13 14 15

17 18 19

Blade tine MZ28PB RE Blade tine MZ28PB LI Blade tine MZ28B RE Blade tine MZ28B LI Threaded plate 12x32x105 2xM16x1,5 Zn Hexagon bolt M16x1,5x37ls17xb15-10.9 Zn Zirkon 9 / Zirkon 6 Blade tine G30P RE Blade tine G30P LI Blade tine S30P RE

Blade tine S30P LI

21 22 23

Blade tine SG30 RE Blade tine SG30 LI Threaded plate 102/32/16 2xM20x1,5 Hexagon bolt M20x1,5x55-10.9 Zn

1 2 3 4 5 6

Info hard-faced, drag hard-faced, drag drag drag

Position

Description

Zirkon 10 Blade tine SZ38P RE

Blade tine SZ38P LI

27 28 29

Blade tine SZ38 RE Blade tine SZ38 LI Blade tine SZ34P RE

Blade tine SZ34P LI

31 32 33 34 35 36 37 38 39 40 41 42 43 44

Blade tine SZ34 RE Blade tine SZ34 LI Blade tine SW34P RE Blade tine SW34P LI Blade tine SW34 RE Blade tine SW34 LI Linch pin 36x137 Zirkon 12 Blade tine G30P RE Blade tine G30P LI Blade tine S30P RE Blade tine S30P LI Blade tine SG30 RE Blade tine SG30 LI Blade tine ZS38P RE

Blade tine ZS38P LI

337 7035

Blade tine ZS34P RE

337 7032 337 7033 459 8602

Blade tine ZS34P LI

48 49 50 51 52

Blade tine ZS38 RE Blade tine ZS38 LI Blade tine ZS34 RE Blade tine ZS34 LI Threaded plate 2xM20x1,5-70 16x44x114 Zn Locking bar Zirkon 8 Hexagon bolt M20x1,5x48 10.9 Zn

Part no 337 7024 337 7025 337 7022 337 7023 459 8601 301 3840

drag & grade drag & grade hard-faced, drag & grade hard-faced, drag & grade hard-faced, drag hard-faced, drag drag drag

337 7058 337 7059 337 7060 337 7061 337 7024 337 7025 337 7022 337 7023 459 8604 301 3847

hard-faced, grade hard-faced, grade hard-faced, drag (old Part no 337 7014) hard-faced, drag (old Part no 337 7015) (old Part no 337 7012) (old Part no 337 7013)

337 7036 337 7037 337 7034

301 4235

53 54

Info

Part no

hard-faced, drag & grade / Potato tines hard-faced, drag & grade / Potato tines Potato tines Potato tines hard-faced, drag & grade hard-faced, drag & grade

337 7054

hard-faced, drag hard-faced, drag

hard-faced, grade hard-faced, grade hard-faced, drag hard-faced, drag drag & grade drag & grade hard-faced, drag & grade hard-faced, drag & grade hard-faced, drag & grade hard-faced, drag & grade Potato tines Potato tines drag & grade drag & grade

337 7055 337 7052 337 7053 337 7050 337 7051 337 7048 337 7049 337 7044 337 7045 337 7042 337 7043 311 9802 337 7036 337 7037 337 7034 337 7035 337 7032 337 7033 33710016 33710017 33710014 33710015 33710012 33710013 33710010 33710011 45910023 555 0729 30110256

Power Harrows Zirkon

ROTORS PER IMPLEMENT

Power Harrows

Number

Zirkon 6 / 250 Zirkon 6 / 300 Zirkon 6 / 400 Zirkon 7 / 250 Zirkon 7 / 300 Zirkon 7 / 400 Zirkon 8 / 250 Zirkon 8 / 300 Zirkon 8 / 350 Zirkon 8 / 400 Zirkon 9 / 300 Zirkon 9 / 400 Zirkon 9 / 450 Zirkon 9 / 400 K Zirkon 9 / 450 K Zirkon 9 / 500 K Zirkon 9 / 600 K Zirkon 9 / 400 KA Zirkon 9 / 450 KA Zirkon 9 / 500 KA Zirkon 9 / 600 KA Zirkon 10 / 300 Zirkon 10 / 350 Zirkon 10 / 400 Zirkon 10 / 450 Zirkon 10 / 400 K Zirkon 10 / 450 K Zirkon 10 / 500 K Zirkon 10 / 600 K Zirkon 10 / 400 KA Zirkon 10 / 450 KA Zirkon 10 / 500 KA Zirkon 10 / 600 KA Zirkon 12 / 300 Zirkon 12 / 350 Zirkon 12 / 400 Zirkon 12 / 450 Zirkon 12 / 400 K Zirkon 12 / 450 K Zirkon 12 / 500 K Zirkon 12 / 600 K Zirkon 12 / 400 KA Zirkon 12 / 450 KA Zirkon 12 / 500 KA Zirkon 12 / 600 KA

10 12 16 10 12 16 10 12 14 16 12 16 18 16 18 20 24 16 18 20 24 12 14 16 18 16 18 20 24 16 18 20 24 12 14 16 18 16 18 20 24 16 18 20 24

Notes

Section

n o i t a r a p e r P d S eedbe

Subsection

CORE ARGUMENTS yy Different tine shapes for any working conditions yy Even loosening effect for shallow and deep tillage yy Shallow seedbed preparation across the full width yy Different rollers for optimal levelling, crumbling and reconsolidation

Section

Subsection Shares for seedbed preparation Description

Info

Duckfoot-share G25 5x250

Length (mm)

Width (mm)

Depth (mm)

Ă&#x2DC; Drillhole

Part no

170

250

337 4356

Mounting screw Countersunk bolt M10x45-12.9-MU-10 Zn incl. nuts

Duckfoot-share G28 5x280

301 5769

170

280

Mounting screw Countersunk bolt M10x45-12.9-MU-10 Zn incl. nuts

Share P58/6 28x5x170

301 5769

170

Mounting screw Bolt M10x35-8.8 Zn incl. nuts

Share S4-40x6x195

Mounting screw Bolt M10x40-8.8 Zn incl. nuts

Mounting screw Bolt M10x35-8.8 Zn incl. nuts

Mounting screw Bolt M10x40-8.8 Zn incl. nuts

210

incl. nuts

337 5480

301 9675

Mounting screw Bolt M10x40-8.8 Zn incl. nuts

Harrow tine 20x220-MU

337 5479

301 9673

160

Share P54/6 6x40x210

337 5476

301 9675

135

Share K4 8x40x160

337 5475

301 9673

195

Share 25x5x135 gerade

337 4357

33710001

301 9675

220

355 8302

Seedbed Preparation Cultivator tines

Cultivator tines, small spring tine

Description

Info

apprx. Width Height (mm) (mm)

Thickness incl. (mm) Point

incl. clip

Part no

Small spring tine 25x8-P58/5

for System Koralle, System-Korund

370

353 5000

Small spring tine 25x8-P58/1

for System Koralle

370

yes

353 5005

Small spring tine 25x8-P59/5

for System Koralle

370

353 4996

Small spring tine 26x10x274

for System-Korund

374

353 5009

Small spring tine 26x10

for Korund 8, System-Korund

476

yes

353 5011

Small spring tine 27x10-P56/5

for System Koralle, System-Korund

376

353 5002

Small spring tine 27x10-P56/1

for System Koralle, System-Korund

376

yes

353 5006

Seedbed Preparation Cultivator tines

Cultivator tines, small spring tine Description

Info

apprx. Width Height (mm) (mm)

Thickness incl. (mm) Point

incl. clip

Part no

Spring tine 32x10 P50/1

for System Koralle, System-Korund

505

yes

353 8721

Spring tine 30x10-D20 P20/1

for Quarz, System Koralle, System-Korund

508

yes

353 8725

Spring tine 30x12-D22 P22/1

for Korund 8, System-Korund

508

yes

353 8726

Gamma tine with point+holder 32x12 G13 D22

for Kompaktor, Korund 7, Quarz, System-Kompaktor, System-Korund

438

yes

353 5516

Gamma tine with point 32x12x540 D22

for Korund 8, Quarz

488

yes

35310015

Gamma tine 32x12x540

for Korund 8, Quarz

488

yes

35310016

Seedbed Preparation Crumbler roller Tube bar roller

Description

Dimensions (mm)

Info

Part no

Tube bar roller LRK 1500/330 Tube bar roller LRK 2000/330 Tube bar roller LRK D330x1500 "B" Tube bar roller LRK D330x2000 "B" Tube bar roller D400x1500 "B" Tube bar roller D400x2000 "B"

330 x 1500 330 x 2000 330 x 1500 B 330 x 2000 B 400 x 1500 B 400 x 2000 B

oval bearing for Kompaktor, System-Korund oval bearing for Kompaktor round bearing for Korund 8, System-Kompaktor, System-Korund round bearing for System-Kompaktor round bearing for System-Kompaktor round bearing for System-Kompaktor

423 0852 423 0853 423 0856 423 0857 423 0925 423 0926

Tooth bar roller

Description

Dimensions (mm)

Info

Part no

Tooth bar roller D330 RE 9 Tooth bar roller D330 RE 9 (B) Tooth bar roller D275 LI 7 Tooth bar roller D275 LI 7ST (B)

330 x 1500 330 x 1500 275 x 1500 275 x 1500

for System-Korund for Korund 8, System-Korund for System-Korund for Korund 8, System-Korund

423 0840 423 0841 423 0843 423 0844

Description

Dimensions (mm)

Info

Part no

Crumbler roller Crumbler roller Crumbler roller Crumbler roller

270 x 1500 270 x 2000 270 x 1500 B 270 x 2000 B

for Kompaktor for Kompaktor for System-Kompaktor for System-Kompaktor

423 0850 423 0851 423 0848 423 0849

Crumbler roller

Seedbed Preparation Crosskill rings and bar

Crosskill rings

8 3

4, 5, 6, 7

Position

Description

Info

Part no

1 2 3 4 5 6 7 8

Crosskill ring D400x125-LI Crosskill ring D400x100 Crosskill ring D400x125-RE Axle D35/50x1474 Axle D35/50x1974 Axle D35/50x1448 Axle D35/50x1948 Washer D90x1,5

Left Centre Right

423 9011 423 9010 423 9012 423 8745 423 8747 423 8758 423 8759 305 6720

Bar Description

Bores

Part no

Bar 100x8x1270 Bar 100x8x1470 Bar 100x8x1470 Bar 100x8x1970 Bar 120x10x1470 Bar 120x10x1970

4x 10mm 4x 10mm 8x 10mm 6x 10mm 4x 10mm 6x 10mm

422 2819 422 2820 422 2821 422 2822 422 2825 422 2826

n o i t a v i t l u C e l b S tub

CORE ARGUMENTS yy Disc diameters of up to 73.6 cm for working depths of up to 20 cm yy Through-hardened DuraMAXX discs for an extremely long service life yy Optimal disc engagement and angle for superior entry behaviour and loosening across the full width yy Standard, hard-faced and carbide share options for any working conditions yy Break-resistant DuraMAXX carbide shares designed for an extremely long service life yy Quick-change system for rapid tool changes between stubble and primary soil cultivation

Stubble Cultivation Concave discs

Description

Number of holes

Diameter (mm)

Part no

Concave disc D465x5 GEZ LK98

4-Hole disc

465

349 0470

Concave disc D465x5 GEZ LK100

6-Hole disc

465

349 0471

6-Hole disc

465

349 0471*

Heliodor 8 / Heliodor 8 Gigant

Heliodor 9 / Heliodor 9 Gigant Concave disc D465x5 GEZ LK100*

* In the Heliodor 9, one or two discs respectively remain at 465 mm for optimal alignment. 4-Hole disc

510

34910027

Concave disc D620x6 notched

6-Hole disc

620

349 0466

Concave disc D620x6 (B) notched

5-Hole disc

620

349 0467

Concave disc D620x6 notched

5-Hole disc

620 harder HRC 57+ disc

34910034

Concave disc D510/105x5 notched

Rubin 9 / Rubin 9 Gigant

Stubble Cultivation Concave discs

Description

Number of holes

Diameter (mm)

Part no

Concave disc D645x6 D155 gez

5-Hole disc

645

34910029

Concave disc D645x6 notched

5-Hole disc

645 harder HRC 57+ disc

34910031

6-Hole disc

736

34910017

6-Hole disc

450

349 0455

6-Hole disc

450

349 0459

Rubin 10

Rubin 12 Concave disc D736/195x6 GEZ

Karat 9/12 & Kristall 9 Concave disc D450/100x5 notched

Smaragd 7/9 & Thorit 8/9 Concave disc D450/100x5 notched

Concave disc mounting

xx = not required

Concave disc part no

Screw/bolt

Washer

349 0470

301 5453

305 6135

349 0471

301 5004

303 0933

34910027

301 3335

305 6135

303 0934

349 0466

301 1806

303 0934

349 0467

301 1806

303 0934

34910034

301 1806

303 0934

34910029

301 1806

303 0934

34910031

301 1806

303 0934

34910017

301 1806

303 0934

349 0455

301 5004

303 0933

349 0459

301 5004

303 0933

Nut

Stubble Cultivation Concave discs

Concave discs per implement Heliodor

Rubin

Heliodor 8 Heliodor 8 / 200 Heliodor 8 / 250 Heliodor 8 / 300 Heliodor 8 / 350 Heliodor 8 / 400 Heliodor 8 / 400 K Heliodor 8 / 500 K Heliodor 8 / 600 K Heliodor 8 / 400 KA Heliodor 8 / 500 KA Heliodor 8 / 600 KA

Number 16 20 24 28 32 32 40 48 32 40 48

Heliodor 9 Heliodor 9 / 200 Heliodor 9 / 250 Heliodor 9 / 300 Heliodor 9 / 350 Heliodor 9 / 400 Heliodor 9 / 400 K Heliodor 9 / 450 K Heliodor 9 / 500 K Heliodor 9 / 600 K Heliodor 9 / 700 K Heliodor 9 / 400 KA Heliodor 9 / 450 KA Heliodor 9 / 500 KA Heliodor 9 / 600 KA Heliodor 9 / 700 KA

Number 15+1* 19+1* 22+2* 26+2* 30+2* 31+1* 35+1* 39+1* 47+1* 55+1* 31+1* 35+1* 39+1* 47+1* 55+1*

* In the Heliodor 9, one or two discs respectively remain at 465 mm for optimal alignment.

Gigant Gigant sections Heliodor 8 Heliodor 8 / 400 Gigant RE Heliodor 8 / 400 Gigant LI Heliodor 8 / 500 Gigant RE Heliodor 8 / 500 Gigant LI Heliodor 8 / 600 Gigant RE Heliodor 8 / 600 Gigant LI

Number 32 32 40 40 48 48

Gigant sections Heliodor 9 Heliodor 9 / 500 Gigant RE Heliodor 9 / 500 Gigant LI Heliodor 9 / 600 Gigant RE Heliodor 9 / 600 Gigant LI Heliodor 9 / 800 Gigant RE Heliodor 9 / 800 Gigant LE

Number 40 40 48 48 64 64

Gigant sections Rubin 9 Rubin 9 / 400 Gigant RE Rubin 9 / 400 Gigant LE Rubin 9 / 500 Gigant RE Rubin 9 / 500 Gigant LI Rubin 9 / 600 Gigant RE Rubin 9 / 600 Gigant LE

Number 32 32 40 40 48 48

Rubin 9 Rubin 9 / 250 Rubin 9 / 300 Rubin 9 / 350 Rubin 9 / 400 Rubin 9 / 400 K Rubin 9 / 450 K Rubin 9 / 500 K Rubin 9 / 600 K Rubin 9 / 400 KA Rubin 9 / 450 KA Rubin 9 / 500 KA Rubin 9 / 600 KA

Number 20 24 28 32 32 36 40 48 32 36 40 48

Rubin 9 Combi Liner Rubin 9 / 300 Combi Liner Rubin 9 / 400 Combi Liner

Number 24 32

Rubin 10 Rubin 10 / 250 Rubin 10 / 300 Rubin 10 / 350 Rubin 10 / 400 Rubin 10 / 400 K Rubin 10 / 450 K Rubin 10 / 500 K Rubin 10 / 400 KA Rubin 10 / 450 KA Rubin 10 / 500 KA Rubin 10 / 600 KA Rubin 10 / 700 KA

Number

Rubin 12 Rubin 12 / 300 Rubin 12 / 350 Rubin 12 / 400 Rubin 12 / 400 KA Rubin 12 / 500 KA Rubin 12 / 600 KA Rubin 12 / 700 KA

Number Number 18 18 22 22 30 34 42

20 24 28 32 32 36 40 32 36 40 48 56

Stubble Cultivation

Bearing for concave disc Bearings overview Description Heliodor 8 Bearing D30x106x98 M24x1,5 RI Bearing D30x106x98 M24x1,5 LE Bearing unit D30x100 M24x1,5 RI Bearing unit D30x100 M24x1,5 LE Bearing unit D30x120 M24x1,5 RI Bearing unit D30x120 M24x1,5 LE Heliodor 8 & 9 Bearing D30x122x100 M24x1,5 RI Bearing D30x122x100 M24x1,5LH Heliodor 9 Bearing D30x130x105 M24x1,5 RI Bearing D30x130x105 M24x1,5 LE Rubin 9 Bearing D130 6xD12 35/72 HI Bearing D130 6xD12 35/72 VO Bearing D35x185x160 M30x1,5 RI Bearing D35x185x160 M30x1,5 LE Rubin 10 Bearing D35x185x155 M30x1,5 RI Bearing D35x185x155 M30x1,5 LE Bearing D32x185x155 M30x1,5 LE Rubin 12 Bearing D40x235x195 M36x1,5 RI Bearing D40x225x195 M36x1,5 LE Karat 9/12 & Kristall 9 Bearing unit D30x100 M24x1,5 Smaragd 7/9 & Thorit 8/9 Bearing 668A 1x30206+32007X Bearing 668A 2x30206

Number of holes

Info

Part no

4-Hole 4-Hole 6-Hole 6-Hole 4-Hole 4-Hole

superseded in 555 4516 superseded in 555 4517 new version 55510012 supersedes for Heliodor new version 55510013 supersedes for Heliodor

555 4510 555 4511 555 4512 555 4513 555 4516 555 4517

6-Hole 6-Hole

55510012 55510013

4-Hole 4-Hole

55510034 55510035

6-Hole 6-Hole 5-Hole 5-Hole

A version - weld-in bearing housings A version - weld-in bearing housings

555 4500 555 4501 55510014 55510015

5-Hole 5-Hole 5-Hole

Bearing right Bearing left Bearing front centre

55510066 55510067 55510069

6-Hole 6-Hole

55510016 55510017

6-Hole

555 4512

6-Hole 6-Hole

only old model Smaragd 80 / 90

547 8882 547 8883

Stubble Cultivation Spring tine and Stalk

Heliodor Description

Info

Part no

Spring tine 90x13x315RD2XD16,2 16° RI Spring tine 90x13x315LD2XD16,2 16° LE Spring tine 90x13x536RD2XD16,2 19° RI Spring tine 90x13x536LD2XD16,2 19° LE Spring tine 90x13x536RD2XD16,2 19° RI Spring tine 90x13x536LD2XD16,2 19° LE Spring tine 90x13x315RD2XD16,2 19° RI Spring tine 90x13x315LD2XD16,2 19° LE

Heliodor 8 Heliodor 8 Heliodor 8/9 Heliodor 8/9 Heliodor 8/9 8 mounting holes for height adjustment Heliodor 8/9 8 mounting holes for height adjustment Heliodor 9 Heliodor 9

353 8730 353 8731 353 8734 353 8735 353 8736 353 8737 35310022 35310023

Description

Info

Part no

Stalk with bearing Rubin 9 RI / LE Stalk 60x25x900 Rubin 9 RE (B) / LI (B)

Rubin 9 "A-Version" only with bearing Rubin 9 "B-Version"

512 8100 / 512 8101 412 8170 / 412 8171

Description

Info

Part no

Stalk 60x30x900 15° RI / LE Stalk 60x30x900 17° RI / LE

back right / back left front right / front left

41220150 / 41220151 41220170 / 41220171

Description

Info

Part no

Stalk 60x35x857 RI / LE Stalk 60x35x857 1xD22 RI / LE

Rubin 12 "A-Version" Rubin 12 "B-Version"

41210024 / 41210025 41210248 / 41210249

Rubin 9

Rubin 10

Rubin 12

Achat/Smaragd/Thorit Description

Info

Part no

Stalk 60x20 H700 Achat Stalk 60x20 H750 Achat Stalk 70x22x875 Stalk 70x22x795-D16

for Achat - extended length 745 mm for Achat/Smaragd -extended length 810mm for Smaragd/Thorit for Smaragd/Thorit

465 3600 465 3605 465 3680 465 3681

Karat/Kristall Description

Info

Part no

Stalk Karat22x788 1xD20,1 2xD12 Stalk SWS 70x22x706 Mounting set stalk+foot+wedge

Stalk without quick-change system Stalk for quick-change system Modification kit for quick-change system

465 3694 465 3696 56510001*

* This kit allows the cultivator to be modified for the quick-change system. The kit comprises the following parts: 465 3696 Stalk foot SWS 70x22x706 46710009 Foot SWF 2 G 321 9861 Sickle spanner 4x30x120 Zn 311 9804 Linch pin 22x40x100 Only the standard spring tines/stalks are listed for the right and left sides. For additional stalks and spring tines refer to the relevant spare parts lists.

Stubble Cultivation Cultivator

narrow share, reversible

Guide plate, sharp angle

Guide plate, various sizes Wing shares, hard-faced, various sizes

Standard and hard-faced share types (1) Deep soil loosening, very little soil mixing intensity (2) Medium deep soil loosening, good soil mixing intensity, for light to medium soils (3) Whole soil area tillage, low soil mixing intensity (4) Whole soil area tillage, very good soil mixing intensity

Share points, hard-faced, various sizes narrow share, carbide

Guide plate, sharp angle

Guide plate, various sizes

Wing shares, hard-faced, various sizes

Hard-metal share types (1) Deep soil loosening, very little soil mixing intensity (2) Medium deep soil loosening, good soil mixing intensity, for light to medium soils (3) Whole soil area tillage, low soil mixing intensity (4) Whole soil area tillage, very good soil mixing intensity

Share points, carbide, various sizes

KL10

KF44

K12P Duomix Schar

Share types for different operation conditions (1) DuoMix: Whole soil area tillage, good soil mixing intensity (2) TriMix: â&#x20AC;&#x2DC;Whole soil area tillage, very good soil mixing intensity (3) K 6: Deep soil loosening, very low soil mixing intensity

KL10

KF44TP

K12P Trimix Schar

Stubble Cultivation

Share/Wing share/Guideboards Overview available shares for cultivators Description normal version - shares Point K12 Share K6 60x25x590 Share LM8 80x25x450 Flat share F20 Flat share F24 Flat Duckfoot-share A30 Double-heart share A12 Double-heart share A13 Point S12D 120x10x230 Point S12K 120x10x200 Share A6 Share O6 Flat Duckfoot-share O30 normal version - wing shares Wing share KF25 RI / LE Wing share KF30 RI / LE Wing share KF40 RI / LE Wing share KF44 RI / LE Wing share KF48 RI / LE Wing share KF52 RI / LE Wing share FL20 RI / LE Wing share FL28 RI / LE Wing share FL35D GEK RI / LE Wing share FL37D GEK RI / LE Wing share FL23D GEK RI / LE Wing share DO59 normal version - guideboards Guideboard KL8 Guideboard KL10 Guideboard KL10S Guideboard, outer KR10 RI / LE Guideboard, outer LBR2 RI / LE Guideboard, outer LBR3 S8 RE / LE Guideboard LB1 100x8x305 Guideboard LB2 100x8x305 Guideboard LB3 80x8x305 hard-faced - shares Point K12P Point K12PM RI / LE Point K8P Point K8PM RI / LE Point S8P 80x14x230 Point S12PK 120x12x200 Point S12P 120x12x230 hard-faced - wing shares Wing share KF25P RI / LE Wing share KF30P RI / LE Wing share KF40P RI / LE Wing share KF44P RI / LE Wing share KF48P RI / LE Wing share KF52P RI / LE Wing share KF40TP RI / LE Wing share KF48TP RI / LE Wing share KF44TP RI / LE Wing share KF52TP RI / LE Wing share FL35P GEK RI / LE Wing share FL37P GEK RI / LE Hard metal - shares Share K6H Point K8H Point K12H Hard metal - wing shares Wing share KF25H RI / LE Wing share KF30H RI / LE

suitable for

Info

Part no

Karat/Kristall Karat/Kristall Labrador Topas/Smaragd Topas/Smaragd Achat Achat 70 Achat 70 Topas/Thorit/Smaragd/Achat 9 Thort/Smaragd/Achat 9 Thorit/Achat/Achat 70/Achat 9 Onyx Onyx

337 4442 33710006 337 1686 337 4350 337 4351 337 4368 337 0463 337 0467 337 4388 337 4393 337 5420 337 3377 337 4367

Karat Karat Kristall Kristall Kristall Kristall Thorit/Achat 9 Topas/Smaragd Smaragd Smaragd Thorit/Achat 9 Dolomit

33710026/33710027 337 4460/337 4461 33710002/33710003 337 4530/337 4531 337 4536/337 4537 337 4540 / 337 4541 337 4402/337 4403 337 4406/337 4407 337 4418/337 4419 337 4420 / 337 4421 337 4428/337 4429 337 4340

Karat/Kristall Karat/Kristall Karat Karat/Kristall Topas/Thorit/Smaragd/Achat 9 Thorit/Achat 9 Thorit/Smaragd/Achat 9 Topas Thorit/Achat 9

DuoMix DuoMix DuoMix DuoMix

sharper angle

337 4482 337 4484 337 4486 337 4490/337 4491 337 4398/337 4399 337 4430/337 4431 337 4395 337 4394 337 4401

Karat/Kristall Karat/Kristall Karat/Kristall Karat/Kristall Thorit/Achat 9 Thorit/Smaragd/Achat 9 Thorit/Smaragd/Achat 9

337 4443 337 4444/337 4445 337 4441 337 4446/337 4447 337 4386 337 4391 337 4392

Karat Karat Kristall Kristall Kristall Kristall Kristall Kristall Kristall Kristall Smaragd Smaragd

33710024/33710025 337 4462/337 4463 33710004/33710005 337 4532/337 4533 337 4538/337 4539 337 4542/337 4543 337 4510/337 4511 337 4512/337 4513 337 4520/337 4521 337 4522/337 4523 337 4426/337 4427 337 4424/337 4425

DuoMix DuoMix DuoMix DuoMix TriMix TriMix TriMix TriMix

Karat/Kristall Karat/Kristall Karat/Kristall

33710023 33710031 33710030

Karat Karat

33710020/33710021 33710018/33710019

Stubble Cultivation Share feet/screws

Overview Description Karat/Kristall Foot SWF 2 G Linch pin 22x40x100 Sickle spanner 4x30x120 Zn Countersunk bolt M12x33-12.9-MUH-10 Zn Countersunk bolt M12x45-12.9-MUH-10 Zn Countersunk bolt M12x55-12.9-MUH-10 Zn Countersunk bolt M12x80-8.8-MUH-10 Zn Washer 13/24x2,5 St-Zn DIN125 Hexagon nut M12-10 Zn DIN6331 Hexagon bolt M12x85-8.8 Zn DIN931 Hexagon bolt M12x70ls52x15-12.9 Zn Hexagon bolt M12x75ls57b15-12.9Zn Topas Foot 10-S/FL Countersunk bolt M12x55x26-12.9-MU 10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Bolt, cup square head M12x30-10.9-MU D603Zn Countersunk bolt M12x65x30-12.9-MU 10 Zn Dolomit Foot 40x87x257,3 Dolomit Countersunk bolt M12x45-12.9-MU-10 Zn Hexagon bolt M16x65ls40xb20-10.9Zn Stalk guard 10x330 Dolomit Labrador Foot 40x215x135 Labrador Countersunk bolt M12x55x26-12.9-MU 10 Zn Stalk guard 100x8x598 Labrador Expansion bush 10x55-DIN1481 Smaragd/Thorit/Achat 9 Foot 10-S/FL Countersunk bolt M12x65x30-12.9-MU 10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x36x4-12.9-MU-10Zn Bolt, cup square head M12x30-10.9-MU D603Zn Countersunk bolt M12x75x30-12.9-MU 10 Zn Thorit/Achat 9 Foot 10-S 10x100x207 Countersunk bolt M12x65x30-12.9-MU 10 Zn Countersunk bolt M12x33-12.9-MU-10 Zn Countersunk bolt M12x36x4-12.9-MU-10Zn Bolt, cup square head M12x30-10.9-MU D603Zn Countersunk bolt M12x75x30-12.9-MU 10 Zn Achat Countersunk bolt M12x50-8.8-MU Zn D608 Countersunk bolt M12x60-8.8-MU Zn D608

Info

Part no

See information below * for securing the share foot for releasing the share foot Mounting point/guideboard, incl. tall nut Mounting point/guideboard, incl. tall nut Mounting point, incl. tall nut Mounting point, incl. tall nut Washer for 30110515 Tall nut, single Wing mounting, matching nut 303 1013 Wing mounting, matching nut 303 1013 Carbide wing mounting, matching nut 303 1013

46710009 311 9804 321 9861 30110513 30110514 30110515 30110516 305 8580 30310108 301 3434 301 3409 30110577

Share mounting, incl. nut Share mounting, incl. nut Wing mounting, incl. nut Mounting guideboard, incl. nut

467 9106 301 5786 301 5785 301 1805 301 5787

Weld-in stalk foot Share mounting, incl. nut Wing mounting, matching nut 303 0935

203 7586 301 5794 301 3870 349 8750

Weld-in stalk foot Share mounting, incl. nut Mounting stalk guard

203 4527 301 5786 349 8745 309 6171

Share mounting, incl. nut Share mounting, incl. nut (stalk 60x20) Share mounting, incl. nut (stalk 70x22) Wing mounting, incl. nut Mounting guideboard, incl. nut

467 9106 301 5787 301 5785 301 5789 301 1805 301 5784

Share mounting, incl. nut Share mounting, incl. nut Share mounting, incl. nut Wing mounting, incl. nut Mounting guideboard, incl. nut

467 9107 301 5787 301 5785 301 5789 301 1805 301 5784

Bottom share mounting, incl. nut Top mounting, incl. nut

301 5795 301 5796

* The current share foot for the Karat and Kristall cultivators has order number 46710009 Quick-change foot SWF 2G This is a cast share foot. Its shape is optimised for absorbing all forces from the share point. The share foot can also be combined with earlier versions in a single implement. The order numbers for the earlier versions, i.e. 467 9110, 467 9111 and 46710008, are automatically replaced by the order number for the current share foot.

Stubble Cultivation Foot complete

41 40 39

37 38 34 34

35 33

31 2

30 1

5 6 4

28 27 26

18 19 17 21 20

12 13 11 16 15 14

10 9 8

Stubble Cultivation Foot complete

Pre-assembled Combination Position

Description

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 o. Bild o. Bild o. Bild o. Bild o. Bild o. Bild o. Bild o. Bild o. Bild o. Bild o. Bild o. Bild

Foot K12P RE Foot K12P LI Foot K12P MI Foot K12P/KL10S RE Foot K12P/KL10S LI Foot K12P/KL10S MI Foot K6 Foot K8P RE Foot K8P LI Foot K8P MI Foot K8H RE Foot K8H LI Foot K8H MI Foot K8H + KF25H RE Foot K8H + KF25H LI Foot K8H + KF25H MI Foot K8P + KF25P RE Foot K8P + KF25P LI Foot K8P + KF25P MI Foot K12P + KF25 RE Foot K12P + KF25 LI Foot K12P + KF25 MI Foot K12P + KF25P RE Foot K12P + KF25P LI Foot K12P + KF25P MI Foot K12P/KL10S + KF25P RE Foot K12P/KL10S + KF25P LI Foot K12P/KL10S + KF25P MI Foot K6H Foot K12H RE Foot K12H LI Foot K12H MI Foot K12H + KF25H RE Foot K12H + KF25H LI Foot K12H + KF25H MI Foot K12H/KL10S RE Foot K12H/KL10S LI Foot K12H/KL10S MI Foot K12H/KL10S + KF25H RE Foot K12H/KL10S + KF25H LI Foot K12H/KL10S + KF25H MI Foot K8H +KF30P RE Foot K8H +KF30P LI Foot K8H +KF30P MI Foot K8H +KF30H RE Foot K8H +KF30H LI Foot K8H +KF30H MI Foot K12H +KF30H RE Foot K12H +KF30H LI Foot K12H +KF30H MI Foot K12H/KL10S + KF30H RE Foot K12H/KL10S + KF30H LI Foot K12H/KL10S + KF30H MI

Point

Edge share point Guide plate K12P RE K12P LI

K12P

Wing

KL10 K12P RE K12P LI

K12P K6

KR 10 RE KR 10 LI KL10

K8P RE K8P LI K8P K8H K8H K8H K8H K8H K8H

KR 10 RE KR 10 LI KL8 KR 10 RE KR 10 LI KL8 KR 10 RE KR 10 LI KL8

K8P RE K8P LI K8P

KR 10 RE KR 10 LI KL8

K12P RE K12P LI K12P

KR 10 RE KR 10 LI KL10

K12P RE K12P LI K12P

KR 10 RE KR 10 LI KL10

K12P RE K12P LI K12P K6H K12H K12H K12H K12H K12H K12H K12H K12H K12H K12H K12H K12H K8H K8H K8H K8H K8H K8H K12H K12H K12H K12H K12H K12H

Boundary guide plate KR 10 RE KR 10 LI

KR 10 RE KR 10 LI KL10S

KF25H KF25H KF25H KF25H KF25H KF25H KF25H KF25H KF25H KF25P KF25P KF25P KF25P KF25P KF25P

KR 10 RE KR 10 LI KL10 KR 10 RE KR 10 LI KL10

KF25H KF25H KF25H

KR 10 RE KR 10 LI KL10S KR 10 RE KR 10 LI KL10S KR 10 RE KR 10 LI KL8 KR 10 RE KR 10 LI KL8 KR 10 RE KR 10 LI KL10 KR 10 RE KR 10 LI KL10S

KF25H KF25H KF25H

Part no 665 4108 665 4109 665 4110 665 4218 665 4219 665 4220 66510191 66510192 66510193 66510194 66510252 66510253 66510254 66510268 66510269 66510270 66510272 66510273 66510274 66510276 66510277 66510278 66510280 66510281 66510282 66510284 66510285 66510286 66510287 66510288 66510289 66510290 66510292 66510293 66510294 66510300 66510301 66510302 66510304 66510305 66510306 66510260 66510261 66510262 66510264 66510265 66510266 66510296 66510297 66510298 66510308 66510309 66510310

Additional share feet with other combinations of shares, guide plates and wings are also available.

Stubble Cultivation Harrows/Levelling foot

Overview Description Harrows Harrow tine STD/12mm Harrow tine 84x539 D14 Harrow tine D13x395x88 Di61,2 RI / LE Harrow tine D13x489x88 Harrow tine D13x420x88 Levelling foot Levelling foot 6x360x425 2xD11,5 Levelling foot 6x304x392 2xD11,5 Levelling foot 6x255x462 2xD11,5 Levelling foot 6x164x425 2xD11,5 Share 150x8x256

suitable for Smaragd/Thorit/Achat 9 Rubin 9 Rubin 10 Rubin 10 Rubin 10/ Rubin 12 Rubin 12 Rubin 12 Rubin 10 Rubin 10 Heliodor

Info

for straw harrows

for rigid implements for folding implements for outside for the centre for the levelling section

Part no 353 8801 353 8802 35310034 / 35310035 35310039 35310025 33710007 33710029 33710028 33710032 337 5487

Stubble Cultivation Shearbolts Cultivator

Shearbolts Position 1 2 3 4 5 6 7 8 9 10 11

Description Hexagon bolt M10x45-8.8 Zn Hexagon bolt M10x55-10.9 Zn Hexagon bolt M12x55-10.9 Zn Hexagon bolt M12x60-8.8 Hexagon bolt M12x60-10.9 Zn Hexagon bolt M12x65-10.9 Hexagon bolt M14x70-10.9 Hexagon bolt M16x65-10.9 Zn Hexagon bolt M20x70x28-8.8 Zn Hexagon bolt M20x100-8.8 Hexagon bolt M16x55-10.9 Zn

Serie type Achat 9 Achat 9 UE Achat 70 Achat 70 UE Achat 80 / Achat 80 UE Achat S / Achat S UE Karat 9 Karat 9 UE Karat 12 Kristall 9 Kristall 9 UE Labrador Smaragd 7 Smaragd 7 UE Smaragd 9 Smaragd 9 UE (M 20) Smaragd 9 UE (M 12) Smaragd 80 Smaragd 80 UE Smaragd 90 Smaragd 90 UE Thorit 8 / Thorit 9 / Thorit 10 Thorit 8 UE / Thorit 9 UE / Thorit 10 UE Topas 110 Topas 140

Part no 301 3240 301 3250 301 3384 301 3388 301 3391 301 3399 301 3595 301 3870 301 4600 301 4407 301 5385

Position 6 5 1 11 4 7 5 3 3 5 3 10 2 8 6 9 5 2 8 6 9 6 5 2 5

Stubble Cultivation

Wing share range for the Kristall cultivator Equipped with Trimix-Shares Part no 337 4512 337 4513 337 4510 337 4511 337 4522 337 4523 337 4522 337 4523 337 4520 337 4521 337 4522 337 4523 337 4520 337 4521 337 4522 337 4523 337 4520 337 4521

Part no 33710002 33710003 33710004 33710005 337 4530 337 4531 337 4532 337 4533 337 4540 337 4541 337 4542 337 4543 337 4536 337 4537 337 4538 337 4539 337 4536 337 4537 337 4538 337 4539 337 4536 337 4537 337 4538 337 4539

Description Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share Wing share

Part no 337 4512 337 4513 33710002 33710003 33710004 33710005 337 4522 337 4523 337 4540 337 4541 337 4542 337 4543 337 4522 337 4523 337 4536 337 4537 337 4538 337 4539 337 4522 337 4523 337 4536 337 4537 337 4538 337 4539 337 4522 337 4523 337 4536 337 4537 337 4538 337 4539

Measurement KF48TP RE KF48TP LI KF40TP RE KF40TP LI KF52TP RE KF52TP LI KF52TP RE KF52TP LI KF44TP RE KF44TP LI KF52TP RE KF52TP LI KF44TP RE KF44TP LI KF52TP RE KF52TP LI KF44TP RE KF44TP LI

Width 300 300 300 300 350 350 400 400 400 400 500 500 500 500 600 600 600 600

Row front front back back front/back front/back front front back back front front back back front front back back

Amount 3 3 4 4 3/4 3/4 4 4 5 5 5 5 6 6 6 6 7 7

Row front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back front/back

Amount 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 5/6 5/6 5/6 5/6 6/7 6/7 6/7 6/7

Row front front back back back back front front back back back back front front back back back back front front back back back back front front back back back back

Amount 3 3 4 4 4 4 3 3 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 7 7 7 7

Equipped with Duomix-Shares Measurement KF40 RE KF40 LI KF40P RE KF40P LI KF44 RE KF44 LI KF44P RE KF44P LI KF52 RE KF52 LI KF52P RE KF52P LI KF48 RE KF48 LI KF48P RE KF48P LI KF48 RE KF48 LI KF48P RE KF48P LI KF48 RE KF48 LI KF48P RE KF48P LI

Width 300 300 300 300 300 300 300 300 350 350 350 350 400 400 400 400 500 500 500 500 600 600 600 600

Equipped with Trimix-Duomix Shares

Measurement KF48TP RE KF48TP LI KF40 RE KF40 LI KF40P RE KF40P LI KF52TP RE KF52TP LI KF52 RE KF52 LI KF52P RE KF52P LI KF52TP RE KF52TP LI KF48 RE KF48 LI KF48P RE KF48P LI KF52TP RE KF52TP LI KF48 RE KF48 LI KF48P RE KF48P LI KF52TP RE KF52TP LI KF48 RE KF48 LI KF48P RE KF48P LI

Width 300 300 300 300 300 300 350 350 350 350 350 350 400 400 400 400 400 400 500 500 500 500 500 500 600 600 600 600 600 600

Notes

D rilling

Drilling

Seed wheels Seed wheels Description

for Seeding shaft

for Device

Seed wheel 13-9x3mm

round

EuroDrill und DKA und Saphir

581 8502

Seed wheel Mono-Plus D20 (Peas)

round

Saphir

481 8537

Seed wheel Mega-Plus D20 (Beans)

round

Saphir

481 8543

Seed wheel ContiPlusD20Nut

round

Saphir

581 8506

Adjusting spring rd

Info

for round Seeding shaft

Part no

481 8504

Seed wheel Mega-Plus SW15 (Beans)

hexagonal

Saphir

481 8544

Seed wheel Mono-Plus SW15 (Peas)

hexagonal

Saphir

481 8545

Seed wheel Conti Plus SW15

hexagonal

Saphir

581 8507

Seed wheel Conti Plus D20

hexagonal - runs on a round hub

Saphir

581 8508

Drilling

Seed wheels Seed wheels Description

for Seeding shaft

for devices

Info

Part no

Seed wheel Conti Plus D20

hexagonal - runs on a round hub

Saphir - Version B

for Additional tramlining*

681 8548

Seed wheel Mono Plus SW15

hexagonal

Saphir - Version B

for Additional tramlining*

681 8549

Seed wheel Mono Plus D20

hexagonal - runs on a round hub

Saphir - Version B

for Additional tramlining*

681 8550

Seed wheel Mega Plus SW15

hexagonal

Saphir - Version B

for Additional tramlining*

681 8551

Seed wheel Mega Plus D20

hexagonal - runs on a round hub

Saphir - Version B

for Additional tramlining*

681 8552

Drive SW15-1R

681 8536

Seed wheel-fine D65x10 2x12Nock-M6

round

Solitair 8 / 9 / 12 and Compact-Solitair

482 5894

Seed wheel D65x12,5 8-Nocken

round

Solitair 8 / 9 / 12 and Compact-Solitair

482 5895

Seed wheel D65x29,5 8-Nocken

round

Solitair 8 / 9 / 12 and Compact-Solitair

482 5896

Solitair 23

48210723

Seed wheel MegaPlus 65x30 D20

* is needed 1x per row with a tramline extension

Drilling

Seed pipes and Bottom flaps Seed pipee Description Eurodrill/DKA Seeding pipe, long Seeding pipe, short 549 Seeding pipe 229 Saphir Seeding pipe, long Saphir ES Seeding pipe, short Saphir ES Seed pipe kpl. D43/39 Solitair Seed pipe D30x250x225-R181 Seed pipe kpl. D43/39 Compact Solitair Seed pipe OptiDisc (A) D25 Seed pipe OptiDisc (B) D25 Seed pipe K-Abstr. OptiD (B) D25 Seed pipe HM-Abstr.OptiD (B) D25 Seed pipe Düngen Seed pipe Düngen 40x2x319 A2 Seed tube drain Fertilisation A2 Solitair 25 Seed pipe OptiDisc (B) D25 Seed pipe K-Abstr. OptiD (B) D25 Seed pipe HM-Abstr.OptiD (B) D25 Azurit Seed pipe Azurit 9

Info

Part no

for Eurodrill for Eurodrill DKA

581 8601 581 8604 481 8603

for Saphir Single disc coulter for Saphir Single disc coulter for Saphir double disc coulters / Solitair Spelt

481 8611 481 8612 582 6006

for Solitair for Solitair for spelt version / Saphir

482 6002 582 6006

for Compact Solitair for Compact Soltair/Solitair 25 Part-no 58210072 incl. plastic scrapers Part-no 58210072 incl. hard metal scrapers for Compact Soltair fertilizer for Compact Soltair fertilizer for Compact Soltair fertilizer

582 6014 58210072 58210074 58210075 482 6013 48210218 48210343

for Solitair 25/Compact Solitair Part-no 58210072 incl. plastic scrapers Part-no 58210072 incl. hard metal scrapers

58210072 58210074 58210075

for Azurit

58310003

Bottom flaps Description

Info

Part no

Bottom flap 33,5x85 Bottom flap 32,5x85 Bottom flap 32,5x85 A2

für Saphir/Eurodrill/DKA für Solitair/Compact Solitair für Solitair/Compact Solitair

581 8524 581 8526 581 8527

Drilling

Seed hoses and Disc coulters Seed hoses Description Collared hoses for Saphir Spiral hose 30-350 Spiral hose 30-480 Spiral hose 30-500 Spiral hose 30-550 Spiral hose 30-600 Spiral hose 30-630 Spiral hose 30-650 Collared hoses for Solitair Flexible hose 25x120 25/30 Flexible hose 25x450 25/30 Hose 25x1040 25/30 Flexible hose 25x1120 25/30 Flexible hose 25x1170 25/30 Flexible hose 25x1320 25/30 Hose 25x360 25/37 Flexible hose 25x460 25/37 Flexible hose 25x940 30/30 Flexible hose 25x1100 30/30 Flexible hose 25x1300 30/30 Flexible hose 25x300 30/37 Flexible hose 25x570 30/37 Flexible hose 25x720 30/37 Flexible hose 25x840 30/37 Collared hoses for Hassia DKA Spiral hose 30-1050 Spiral hose 30-1250

Info

Part no

replaces in 377 4204 - shorten as required replaces in 377 4204 - shorten as required replaces in 377 4204 - shorten as required replaces in 377 4204 - shorten as required replaces in 377 4204 - shorten as required replaces in 377 4204 - shorten as required

377 4194 377 4196 377 4197 377 4199 377 4200 377 4193 377 4204 377 4045 377 4027 37710075 377 4032 377 4030 377 4040 37710076 377 4038 377 4028 377 4039 377 4041 377 4036 377 4037 377 4044 377 4042 377 4201 377 4202

We regret that the collars are not available separately. They are attached to the hoses using a special production process, which ensures a smooth transition to the hose and provides for a long-lasting connection. The item name indicates the hose length and diameter and the collar connection size of the sleeve. Description

Info

Hoses by the metre Flexible hose D22 Flexible hose D25 Flexible hose D30 Flexible hose D40 Flexible hose D40 EL Flexible hose D50 EL Flexible hose D65 Flexible hose D65 Flexible hose D65 EL Flexible hose D90 Flexible hose D140 Flexible hose D170 Flexible hose D170 EL Flexible hose D200

blue transparent electrically conductive electrically conductive black black, smooth electrically conductive PU-7 PU-7 PU-7 electrically conductive

Part no 377 3993 377 3992 37710044 377 3994 37710175 37710176 377 4061 37710023 37710161 37710126 377 4116 377 4115 37710158 377 4117

Disc coulters

Description

Info

Part no

Disc D335/43x2,5 Disc D329x4 Concave disc D325/70/35x3 Disc D350/70/35x3 16,5° Disc D400/70/35x3 12xD6,2 Disc D350x3x25,5 6xD8,2 Disc D400x3x25,5 6xD8,2

Eurodrill seed coulter Outer seed coulter – Eurodrill Single disc coulter Saphir Solitair Double disc coulter – outside bearing Double disc coulter – fertilisation – external bearing Double disc coulter – inside bearing Double disc coulter – fertilisation – and Azurit double disc coulter – inside bearing

349 0006 349 0007 349 0009 349 0010 349 0012 34910010 34910011

Drilling Bearing

Seed drill bearing Description

Info

Part no

Bearing D40/13x18,3

for single disc coulter, double disc coulter with roller, pressure roller, supersedes old version 319 8563

319 8702*

Bearing 3205B.2RS

Double disc coulter – forms part of the complete bearing 555 4520

319 8708

Four point bearing D78/16x23 6xM8

Double disc coulter, new version

31910006

Four point bearing D78/16x23 A2

Azurit double disc coulter, double disc coulter – fertilisation

31910026

* Please also order 1 x bushing 317 7663 and 3 x support discs 305 2330 with this bearing.

Bearing spare parts kit double disc coulters Description

Info

Part no 582 1020

Hub DS D52/25x20,6

This spare parts kit comprises the following: Not all of these parts are required. They allow the bearing to be mounted to all previously supplied double disc coulter versions, regardless of whether the mounting holes of the disc carriers are threaded or not. The relevant mounting instructions can be found in LEMKEN Leonis, No. 982 1251.

Description

Picture no

Number

Part no

Hexagon bolt M6x10-10.9 Zn DIN933

6,000

301 3015

Hexagon bolt M12x55-8.8 Zn DIN931

1,000

301 3385

Hexagon bolt M12LHx55-8.8 ZnDIN931

1,000

301 3386

Hexagon bolt M12LHx65-8.8 Zn D.931

1,000

301 3401

Hexagon bolt M12x65-8.8 DIN931 Zn

1,000

301 7341

Selflocking nut NM12-8 Zn DIN985

1,000

303 0934

Selflocking nut NM12LH-8 Zn DIN985

1,000

303 0944

Washer 13/25x3 DIN1441-St Zn

2,000

305 6137

Washer 13/32x1,25 St-Zn

2,000

305 8582

Cap D67,12/12,25 t=3 Zn

1,000

319 1133

Tribol GR 1350-2-5 PD -20g

not shown

1,000

877 1617

Pivot D33/12,25x31,5 Zn

11 – assembled

1,000

317 7667

Bearing housing D80/52x31,5 6xM6 Zn

11 – assembled

1,000

319 1132

Bearing 3205B.2RS

11 – assembled

1,000

319 8708

Nilos ring 25x52x4 LSTO

11 – assembled

2,000

323 1862

The bearing is fitted as follows, depending on the application.

Drilling

Seed drill scraper

Description

Info

Part no

Screw/bolt

Disc

Nut

Scraper 3x98/76x125,5

plastic scrapers double disc coulters 2-Hole

349 2026

Scraper 105x3x115

hard metal scrapers double disc coulters 2-Hole

349 2031

Scraper 3x95/79,65x100 4xD9

plastic scrapers double disc coulters 4-Hole

34910013

Scraper 3x95/79x102 4xD9

hard metal scrapers double disc coulters 4-Hole

34910012

Scraper 85x3x115

hard metal scrapers double disc coulters-fertilizer

349 2032

Scraper 62,5x3,0x131,2 GEB RE

Outer scraper, right double disc coulters

34910004

30110015

305 8580

303 0934

Scraper 62,5x3,0x131,2 GEB LI

Outer scraper, left double disc coulters

34910005

30110015

305 8580

303 0934

Carrier for scraper 4x35x226,2

Pressure roller scraper

349 2064

301 3385

305 8580

303 0934

Scraper 3x90x58

Azurit outer scraper

34910033

301 1123

305 8694

303 0932

Threaded pin M6x80 8.8 Zn

Azurit support roller scraper

301 9891

303 1009

305 8573

303 0931

Scraper 25x1,5

Flat disc coulter scraper Eurodrill/DKA

349 2050

301 3038

305 8573

303 0931

Drilling

Pressure rollers Description

Info Pressure roller double disc coulter Pressure roller cpl. D340/13x50 Support roller double disc coulters complete This order number covers the following parts, which can also be ordered separately. Wheel centre D300/40/m42x2x50 Tyre D340/280x50 Bearing D40/13x18,3 replaces bearing 319 8563 Bushing D12,0/13,0x17,5 For bearing 319 8702, this bushing + 3 x support discs 305 2330 are required. Screw cap for pressure roller â&#x20AC;&#x201C; not comprised in 357 6001 Cap M42x2 SW24

Part no

Description

Part no

Pressure roller Reinforcement kit Supplementary set D340/13x50

Info

357 6001 357 6002 357 6003 319 8702 317 7663 323 1325

582 5709

The reinforcement kit contains discs to be screwed/bolted onto the spokes for reinforcement. This is particularly useful in rocky soils. All required parts are contained in the kit. The old mounting screw and protective cap are no longer required.

Drilling

Seed drill harrow Saphir/Solitair Description

Info

Part no

Harrow tine U20x140

Saphir 7 Harrow wheel

353 7055

Harrow tine 10x1700 U20x140

Saphir/Solitair Single harrow

353 7054

Harrow tine H-D9/4x75

Saphir/Solitair/Compact-Solitair harrow S

353 7056

Harrow tine V-D9/4x75

Saphir/Solitair/Compact-Solitair harrow S

353 7057

Bar D50x450

Tyre packer harrow Compact Solitair

35310008

Description

Info

Part no

Single harrow tine D12

Solitair 25

35310026

Single harrow tine D12 short

Solitair 25

35310027

Single harrow tine. D10

Solitair 25 Single harrow tine

35310030

Solitair 25

Drilling

Seed drill harrow Eurodrill/DKA Description

Info

Part no

Leaf spring 30x3,5

Eurodrill/DKA Harrow attachment

353 7010

Leaf spring 30x3,5x464

Eurodrill/DKA Harrow attachment

353 7011

Spring tine D9 S RE

Eurodrill/DKA Spring tine harrow

353 7022

Spring tine D9 S LI

Eurodrill/DKA Spring tine harrow

353 7023

Single harrow tine E. RE D7

Eurodrill/DKA Single harrow

353 7038

Single harrow tine E. LI D7

Eurodrill/DKA Single Harrow

353 7039

Single harrow tine E. D7

DKA Single harrow

353 7040

Tine, rear D6,5

Eurodrill/DKA Harrow

353 7046

Tine, front D6,5

Eurodrill/DKA Harrow

353 7047

Single harrow tine rear D7,5

Eurodrill/DKA Harrow divided

353 7048

Single harrow tine front D7,5

Eurodrill/DKA Harrow divided

353 7049

Drilling

Sensors/2nd spring set/overload link Sensors for terminal with Easytronic, Solitronic Description Sensor M12x1,5x45, 3P, PNP, IFS204 Sensor M12x1,5x45 3P PNP (on/gn) V4A

Info

Part no

VA version – for fertiliser equipment

573 4375 573 4389

Sensor for terminal LH1600, LH5000 Description

Info

Part no 573 4366

Sensor INS-M12x1x45 IF5997

2nd spring retrofitting kit for increased coulter pressure Description

Info

Part no

Holder for spring für DS Solitair Holder for spring für DS Saphir Holder for spring für DS Saphir

for Solitair for Saphir-G-Lasche for Saphir-U-Lasche

582 6054 582 6055 582 6056

for Solitair

for Saphir-G-Lasche

for Saphir-U-Lasche

Overload protected link for double disc coulter

Description

Info

Part no

Link 2xZ12-250,5

for Solitair

482 6025

Drilling

Conical plug/Crank/Balance Balance

Description

Info

Part no

Balance 30kg

Balance incl. case, charger and batteries

67310022

Description

Info

Part no

Crank KPL

This crank is suitable for all manually calibrated implements.

321 8540

Description

Info

Part no

Conical plug D20,3/22,6/25x14

This conical plug allows one or several outlets in the distributor head of pneumatic seed drills to be closed.

323 7456

Crank

Conical plug

Drilling

Azurit precision seed drill technical - seed coulter units 5 6

2 1

Position 1 2 3 4 5 6

Description Star disc D285x6 1xD25 6xD8,5 Disc D400x3x25,5 D60-6xD8,2 Trapeze packer roller -R D500x314,4-2R125 Roller D300/106x26,3 Tyre D452/368x96 Azurit Tyre D316/257x33 Azurit

Info Star disc Double disc coulter disc/disc carrier Trapeze element Guide wheel roller Depth control wheel tyre Roller tyre

For additional details consult the LEMKEN spare parts documentation (agroparts.com).

Part no 48310189 34910011 48310035 35710087 35710081 35710098

Drilling

Further seed coulters Suffolk coulter for Saphir/Solitair

3 1 Position

Description

Part no

1 2 1-3

Point Flap opened Suffolk coulter

337 8099 481 8527 582 6042

Single disc coulter for Saphir/Solitair

4 5

3 Position

Description

Part no

1 2 2 3 3 4 5

Cap D90/87/12 Disc holder RE Disc holder LI Flap ES-RE D9/14x27 Flap ES-LI D9/14x27 Hollow disc D325 Disc bearing DS D52/25x20,6

319 1130 481 8029 481 8030 481 8528 481 8538 349 0009 582 1020

Drilling

Further seed coulters Coulter for DKA 4

5 1

Position

Description

1 2 3 4 4 5 6

Flap opened, red Bellows Seeding pipe Spiral hose short Spiral hose long Coulter shoe Point

Info

L = 1050 mm L = 1250 mm

Part no 481 8529 481 8581 481 8603 377 4201 377 4202 245 1802 337 8100

Drilling

Further seed coulters Disc coulter for DKA 3

5 2 4

7 7 1 8

Position

Description

1 2 2 3 3 4 5 7 8

Washer Depth limiter rh Depth limiter lh Spiral hose short Spiral hose long Bellows Seeding pipe Scraper Bearing

Info

L = 1050 mm L = 1250 mm

Part no 581 8420 481 6894 481 6895 377 4201 377 4202 481 8581 481 8603 349 2050 319 8589

Drilling

Further seed coulters Coulter for Eurodrill

10 1

8 3

Position

Description

Info

Part no

1 1 2 2 3 4 5 6 7 8 9 9 10

Coulter shoe RE Coulter shoe LI Leveller RE Leveller LI Flap opened, red Cover flap Bellows Bellows Seeding pipe, long Point Spring 3,6x36,4x114 Spring 4x32x127 Wire rope

For outside coulter For outside coulter

481 7062 481 7063 481 6888 481 6889 481 8529 481 6885 481 8581 481 8580 581 8601 337 8100 329 8541 329 8542 331 2030

Drilling

Further seed coulters Disc coulter for Eurodrill

13 13 1

2 11 9

Position

Description

Info

Part no

1 2 3 4 5 6 7 8 9 9 10 11 12 12 13

Coulter body Washer Washer Bearing Disc Disc Spring 4x32x127 Wire rope Seeding pipe, long Seeding pipe, short Bellows Bellows Depth limiter rh Depth limiter lh Scraper

For outside coulter For outside coulter

581 8063 581 8422 581 8420 319 8589 349 0007 349 0006 329 8542 331 2030 581 8601 581 8604 481 8581 481 8580 481 6894 481 6895 349 2050

For outside coulter

Ro l l e r

100

Roller scraper and bearing Scraper for roller

Description

Info

for *

Part no

Screw

Disc

Nut

Synthetic scraper 68x53,5x10

plastic

TSW

349 2007

301 7760

303 0932

Scraper 5x55x85 "P" 2xD8,5

GTW

349 2011

301 7760

303 0932

Scraper 72x3x90 P

GRW

349 2009

301 1710

305 6132

303 0933

Synthetic scraper 93x53,5x10/18

plastic

TSW

349 2008

301 7760

303 0932

Scraper 60x5x94

hard metal

TPW

349 2005

301 7760

303 0932

Scraper 90x5x94

hard metal

ZPW, TPW

349 2004

301 1706

303 1012

Scraper 105x5x94

hard metal

TPW

349 2006

301 7760

303 0932

Synthetic scraper 110x120x12

plastic

ZPW

349 2003

301 1706

303 1012

TRW

349 2029

301 3324

303 0934

ZPW

349 2000

301 1706

303 1012

ZPW

349 2001

301 1706

303 1012

Scraper 60x6x130

Scraper plate 90x3x85

Scraper 90x3x130

Support plate for plastic scrapers

* Legend - page 103

101

Roller scraper and bearing Scraper for roller

Description

* Legend - page 103

102

for *

Part no

Screw

Washer

Nut

Knife 6x347/50 2xD8,5-80

Info

MSW

337 5002

301 1805

305 6137

Knife-L 6x552,7/50 2xD12,5

MSW

337 5003

301 1805

305 6137

Knife 60x6x568 2xD8,5-80

MSW

337 5005

301 1805

305 6137

Scraper 8x90x110 80Shore

PPW

349 2012

301 6750

305 8694

303 0932

Scraper PPW 50x5x72,6

PPW

349 2013

301 3266

305 6132

303 0933

Scraper PPW-V 4x95x190

PPW

349 2014

301 7785

303 0933

Scraper PPW(A)-M 50x10x330

PPW, PDW

349 2015

301 7761

305 8580

303 0933

Scraper 6x80/50x181 GEP

PPW

349 2016

301 7761

305 8696

303 0933

Scraper PPW(A)-H 5x85x220

PPW

349 2017

301 1706

305 8696

303 0933

Scraper PPW(A)-V 5x95x150

PPW, PDW

349 2018

301 1706

305 8696

303 0933

Scraper PPW(A)-RV 5x90x95

PPW, PDW

349 2019

301 1706

305 6110

303 0933

Roller scraper and bearing Scraper for roller

Description

for *

Part no

Screw

Washer

Nut

Scraper 50x8 TRP-Walze

Info

TRW

349 2022

301 7789

303 0934

Scraper 60/35/32x10x388,5

TRW

349 2025

301 3335

305 6167

303 0934

Scraper 30x8x130

TRW

349 2028

301 3324

303 0934

Scraper PDW-H 5x113x260

PPW, PDW

349 2033

301 1706

305 8696

303 0933

Scraper 50x10x195 2xD10,5

FRW

34910002

301 5767

305 8696

303 0933

Scraper 10x60x1002 GEP

FRW

34910007

301 3391

305 8580

303 0934

Scraper-hard metal 60x5x94

TPW

34910018

301 7760

303 0932

Scraper-hard metal 90x5x94

TPW, ZPW

34910019

301 7760

303 0932

Scraper 3x90x95

ZPW

34910020

301 7760

303 0932

Legend

Roller

FRW GRW GTW MSW PDW PPW TPW TRW TSW ZPW

Flex ring roller Rubber ring roller Rubber trapeze roller Knife roller Packer double roller Packer profile roller Trapeze packer roller Trapeze ring roller Trapeze disc roller Toothed packer roller

103

Roller scraper and bearing

Roller bearing

Description

Info

Part no

Flange bearing for 25 mm bearing cone

319 9367

Bearing cpl. RCJT 25x134x44,5

Bearing cpl. RCJT 25x100x43

Please also order 1x O-ring 375 1113 as seal

319 9371

Flange bearing for 35 mm bearing cone

319 9352

Bearing cpl. RCJT 35-C 2-Loch

Bearing cpl. RCJ 35 4xM12 GGG

Please also order 1x O-ring 375 1277 as seal

319 9372

319 9365

Bearing cpl. RCJ 35 4-Loch GGG

Plastic bearing for rollers

104

Synthetic bearing D65/33x40

Plastic bearing

317 9370

Bearing LSK+LFK Zn

Bearing housing

317 9125

ator c i d a r e k r a m l Whee

105

Wheel mark eradicator

Flat share and Duckfoot-share

Description

Info

Part no

without support or attachment, including share

557 4991

Flat share VS33

Flat share for wheelmark eradicator

337 4361

Hexagon bolt M10x45-8.8 Zn DIN931-A

Mounting screw Flachschar

301 5424

Selflocking nut NM10-8 DIN985 Zn

Flat share mounting nut

303 0933

Description

Info

Part no

Wheel mark eradicator FSUE+G25 40x20

without support or attachment, including share

557 4995

Wheel mark eradicator FSUE+G25 40x20 Sy-Korund

Korund/Quarz version

557 5006

Duckfoot-share G25 5x250

Duck-foot share for wheelmark eradicator

337 4356

Countersunk bolt M10x45-12.9-MU-10 Zn

Mounting screw inkl. Nut

301 5769

Spring ring 10 DIN127 Zn

matching washer

305 9900

Wheel mark eradicator Flat share Wheel mark eradicator FSUE-VS33 Share for wheel mark eradicator 557 4991

Wheel mark eradicator Duckfoot-share

Share for wheel mark eradicator 557 4995 and 557 5006

106

Wheel mark eradicator

Eradicator point and Eradicator disc

Description

Info

Part no

without support or attachment, including share

557 5001

Share S4-40x6x195

Narrow share for wheelmark eradicator

337 5476

Bolt, special M10x45-8.8 Zn

Mounting screw

301 9681

Selflocking nut NM10-8 DIN985 Zn

Mounting nut

303 0933

Description

Info

Part no

Track levelling disc D449 RE

Wheelmark eradicator for 80-gauge square tube incl. corrugated disc

65710040

Track levelling disc D449 LI

Wheelmark eradicator for 80-gauge square tube incl. corrugated disc

65710041

Disc D449x4 LK100 6xD10,5

Corrugated disc for wheelmark eradicator

34910008

Hexagon bolt M10x30-8.8 Zn DIN933

Corrugated disc mounting screw

301 5004

Selflocking nut NM10-8 DIN985 Zn

Corrugated disc mounting nut

303 0933

Wheel mark eradicator point Wheelmark eradicator FSUE S 4 Share for wheel mark eradicator 557 5001

Wheel mark eradicator disc

Disc for wheel mark eradicator 65710040 and 65710041

107

Fieldsprayers

Pump spare parts For LEMKEN devices Pump

Complete pump

Separate O-rings for valves

Valves (incl. O-ring)

Diaphragms

Altek P150

57310016 57810015 57810014

Altek P200/P200 Altek P260/P260

57810201 57810202

Altek P270

57810182

4x 57810104 4x F61 1599 8x 57810104 4x 57810104 4x 57810106 16x 57810104 8x 57810104 8x 57810106 2x 57810104 2x F61 1599

37810594

Altek P200 Altek P260

4x F61 1534 4x F61 1600 8x F61 1534 4x F61 1534 4x 37810997 16x F61 1534 8x F61 1534 8x 37810997 2x F61 1534 2x F61 1600

37810592 37810593 37810592 37810593 37810594

For Jakoby and LEMKEN devices Pump

Complete pump

Separate O-rings for valves

Valves (incl. O-ring)

Diaphragms

JM BP 155(151) /20 JM BP 215/20 JM BP 235/20 JM BP 235/20 K JM BP 280/20 JM 270/20 JM 275/20

F61 3759

F61 2201 F61 2201 F61 2201 F61 2327 F61 2327 F61 1646 F61 1646

F61 1493 F61 1493 F61 1493 F61 4218 F61 3872 F61 1644 F61 1654

F61 3405 F61 3405 F61 3405 F61 3405 F61 3405 F61 3416 F61 3416

F61 3905 F61 3862

For RTS and LEMKEN devices Pump

Complete pump

Separate O-rings for valves

Valves (incl. O-ring)

Diaphragms

AR 160 AR 250 mit Windkessel AR 250 ohne Windkessel

R00 1330 R00 1331 R00 1332

R00 1063 R00 1063 R00 1063

R00 1073 R00 1073 R00 1073

37810597 37810597 37810597

The respective spare part item number is indicated. If different valves / O-rings are installed in a pump, their quantities are also indicated.

109

Fieldsprayers

Filter inserts/nozzle membranes

Suction filter for EuroLux Filter insert (50 mesh), standard for Primus, Albatros, Sirius 7/8/9/10/12, Vega 12, EuroTrain Filter insert (32 mesh) Filter insert (50 mesh), standard Filter insert (80 mesh)

Colour coding

O-rings for filter, separate

Filter

blue

F61 4142

F61 2575

white / red blue grey / yellow

F61 2140 F61 2140 F61 2140

37810021 37810022 37810023

Colour coding

O-rings for filter, separate

Filter

blue grey / yellow red / green

37810274 37810274 37810274

F61 2597 F61 2637 F61 2638

blue yellow green

N/A N/A N/A

37810140 37810141 37810142

Press filter for Primus, Albatros, Sirius 7/9, EuroLux, EuroTrain Filter insert (50 mesh) Filter insert (80 mesh), standard Filter insert (100 mesh) for Sirius 8/10/12, Vega 12 Filter insert (50 mesh) Filter insert (80 mesh), standard Filter insert (100 mesh)

Membranes for nozzle holder x 1/x 3/x 5 Membrane Primus, Albatros, Sirius 7/8/9/10, EuroLux, EuroTrain Membrane drip-stop Primus 10/12, Albatros 10/12, Sirius 10/12, Vega 12 with Seletron valve Membrane D22 Viton (green) Membrane D22 EPDM (black)

The respective spare part item number is indicated.

110

F61 3392 37810185 37810941

Original spare parts for maximum service lives

OF US

A PART 111

LEMKEN Original Parts

Packing unit

Packing units frequently used screws/bolts

Description

Info

Packing unit

Part no

Bolt, cup square head M12x30-10.9-MU D603Zn

incl. nuts

301 1805

Bolt, cup square head M12x30-10.9 DIN603 Zn

301 1806

Hexagon bolt M12x60ls42xb15-10.9Zn

301 3391

Hexagon bolt M12x65ls47xb15-10.9Zn

301 3399

Hexagon bolt M12x70ls52x15-12.9 Zn

301 3409

Hexagon bolt M12x75ls57xb15-10.9Zn

301 3424

Hexagon bolt M12x85ls67-10.9 Zn

301 3435

Hexagon bolt M14x70ls51x15-10.9 Zn

301 3595

Hexagon bolt M14x85ls61x20-10.9 Zn

301 3607

Hexagon bolt M16x1,5x50xb22-10.9Zn

301 3840

Hexagon bolt M10x30-8.8 Zn DIN933

301 5004

Hexagon bolt M16x75ls50xb20-12.9Zn

301 5361

Hexagon bolt M16x160-8.8 Zn DIN931

301 5410

Hexagon bolt M10x45-8.8 Zn DIN931

301 5424

Countersunk bolt M10x33x4-12.9 Zn

301 5721

Countersunk bolt M10x45x4-12.9 Zn

301 5722

Countersunk bolt M10x33-12.9-MU-10 Zn

incl. nuts

301 5767

Countersunk bolt M10x45-12.9-MU-10 Zn

incl. nuts

301 5769

Countersunk bolt M10x25-8.8-MU Zn D608

incl. nuts

301 5771

Countersunk bolt M10x35-8.8-MU Zn

incl. nuts

301 5773

Countersunk bolt M12x75x30-12.9-MU 10 Zn

incl. nuts

301 5784

Countersunk bolt M12x33-12.9-MU-10 Zn

incl. nuts

301 5785

Countersunk bolt M12x55x26-12.9-MU 10 Zn

incl. nuts

301 5786

Countersunk bolt M12x65x30-12.9-MU 10 Zn

incl. nuts

301 5787

Countersunk bolt M12x36x4-12.9-MU-10Zn

incl. nuts

301 5789

Countersunk bolt M12x45-12.9-MU-10 Zn

incl. nuts

301 5794

Countersunk bolt M12x50-8.8-MU Zn D608

incl. nuts

301 5795

301 6123

Countersunk bolt M10x30-10.9 Zn D7991

112

Bolt M10x40-8.8-MUZn

incl. nuts

301 9675

Countersunk bolt M12x33-12.9-MUH-10 Zn

incl. nuts

30110513

Countersunk bolt M12x45-12.9-MUH-10 Zn

incl. nuts

30110514

Countersunk bolt M12x55-12.9-MUH-10 Zn

incl. nuts

30110515

Countersunk bolt M12x80-8.8-MUH-10 Zn

incl. nuts

30110516

LEMKEN Original Parts Operating materials

Paint/Colour Description

Info

Part no

Paint/colour Lemken-blau Grosol-W-paint RAL 5015 1kg Paint RAL 5015 1.Liter Paint/colour RAL3000 Feuerrot Paint/colour RAL7045 Telegrau 1

LEMKEN - blue LEMKEN - blue LEMKEN - blue red grey

170 1150 170 1167 170 1190 170 1146 170 1152

Description

Info

Oil Part no 877 1270 877 1271

Oil Mobilube HD85W-140 Dose 20lite Oil Mobil SHC 632 Dose 20liter

Grease Description

Info

Part no 877 1592 877 1595

Grease 00 EP 5kg Grease Tribol GR 00 PD 5kg

Screw locking Description

Info

Part no 886 3001 886 3010 886 3005 886 3006

Screw locking AN 306-62 / 10 ml Screw locking AN 306-62 / 50 ml Loctite 641 50ml Loctite 641 10ml

Further operating materials Description

Info

Part no

Fluid Seal Tribol GR 1350-2-5 PD -20g Paint/colour Chassis protection Long Life Grease Optimol-Spray TA 0,4l Adhesive lubricant OKS 451 S3 400ml

Liquid seal for bearing of double disc coulter Double disc coulter bearing grease

886 3013 877 1617 170 1151 877 1600 877 1630

113

LEMKEN Original Parts

Consumable & Label

Zipper bags Description

Info

Part no

Zipper bags 160x220x0,05 Zipper bags 80x120x0,05

Plastic bag with LEMKEN Logo large Plastic bag with LEMKEN Logo small

886 4390 886 4391

Description

Info

Part no

Splicing tape LEMKEN 50 mm

Packing tape with LEMKEN Logo

886 4020

Description

Info

Part no

Label Logo+LEMKEN (35x186) Label Logo+LEMKEN (50x267) Label Logo+LEMKEN (80x427)

current LEMKEN Logo white - small current LEMKEN Logo white - middle current LEMKEN Logo white - large

390 4310 390 4311 390 4312

Splicing tape

Label

114

Main assembly structure We have categorised spare parts into various main assemblies to make it easier to locate them. The following categories apply to all implement groups. These categories can also be found in the LEMKEN online spare parts catalogue (agroparts.com). Main assembly structure 01 - Frame

02 - Coupling parts / Attachment

03 - Hydraulic

04 - Electric / Electronic / Software

05 - Trailer / Tyres / Axle

06 - Working tools

07 - Preliminary tools / Auxiliary tools

08 - Rollers

09 - Overload safety device

10 - Gear Box / Drive

11 - Tank

12 - Braking system

13 - Airflow

14 - Dosage / Seeding mechanism

15 - Boom

16 - Water union / Water hydraulics

17 - Steering

18 - Engine

19 - Exhaust gas aftertreatment device

20 - Hydrostatic drive

21 - Cabin

115

LEMKEN . 12/18 â&#x2C6;&#x2122; 17512462/en

All specifications, dimensions and weights are subject to continuous technical development and are therefore not binding. The weight specifications always refer to the basic equipment. Subject to change.

LEMKEN GmbH & Co. KG Weseler StraĂ&#x;e 5 46519 Alpen, Germany Phone +49 2802 81-210 Fax +49 2802 81-220 parts@lemken.com lemken.com