FY25 Gear Up 1 Campaign

•

•

Piece

Piece Combination Ratchet Ring & Open End Spanner Set

11 Piece #14

General Engineering

Bi-Metal Holesaw Set •

10 Piece Screw Extractor Set

• Range: #1 – #5; + Left Hand Cobalt jobber drills: 2, 3, 4, 5.5, 7.5mm PART NUMBER: 03322947

Side Cutter Pliers – 203mm

• Knife and anvil cutting edge

•

• Hand honed and induction hardened

Lineman Plier – 216 mm

• Cross-hatch serrated jaws provide better grip on work

• Anvil and knife cutting edges hard honed, induction hardened and tested on frayed hemp and piano wire

• Insulated to 1000V

Twinkey® Control Cabinet Key

• Multifunctional key for actuation of locking systems

• Square: 5, 6 – 7, 8 – 9, 10 – 11mm

• Triangular: 7 – 8, 9 – 10, 11 – 12mm

• Double key bit: 3 – 5mm, half moon: 6mm, steplike square: 6 – 9 mm

PART NUMBER: 01894760

4 Piece Plier Set

PART NUMBER: 00814614

4 Piece Circlip Plier Set

PART NUMBER: 06001925

6 Piece 1000V VDE Screwdriver Set

PART NUMBER: 01840173

15 Piece Impact Socket Set

• 1/2" Square Drive

• Equivalent to a 42 piece conventional set

• Fits Metric and A/F sizes

PART NUMBER: 04656467

15 Piece Deep Impact Socket Set

• 1/2"

125mm Multifunctional Vice

PART NUMBER: 00190438

Fabricated Engineer's Vices

– Offset

• Manufactured from heavy steel plate

• Case hardened replaceable steel jaws, replaceable nut, corrosion resistant screw and handle

3 Piece Pry Bar Set

• Screwdriver type pry bar with steel capped end

• Composite, ergonomically designed handle to allow user to strike pry bar with hammer without damaging head

• Curved blade for extra leverage PART NUMBER: 04908128

3 Piece Rolling Head Pry Bar Set

• Unique curved end enables better leverage in small confined areas

• Opposite end designed for aligning work

PART NUMBER: 06222007

Building & Hardware

Access Platform Ladders

•

•

•

The Bailey Access Platform Ladders are designed for safe, easy and efficient use in warehousing, transport, vehicle maintenance, mining, aviation and heavy industry workplaces.

The Access Platforms are supplied as a flat packed, off the shelf height access solution. A convenient detachable stock picking shelf, safety gate and castors are included as standard.

Safety Steps

• Bright colours for high visibility

• Recessed anti-slip tape to prevent trips

• L508 x W505 x H355mm

• 150kg loading capacity

4035 Orange

9047 Yellow

Steel Fence Post Lifter

• Easy to use and remove posts

• Retains the integrity of removed posts

• Ideal for roadside barrier and rural fencing installation

Fence Post Driver

Safety Step Platform –Rubber Stop Kit

• Easy to follow instructions

• Kit includes phillips head screwdriver and hex wrench and 4 white synthetic rubber stoppers, 4 x screws, 4 x washers and 4 x self-locking nuts

NUMBER: 02984477

• Manufactured from heavy steel, weighted with reinforced steel head

• Minimises damage to tops of fence posts

Triangular Post Caps – Pack 40

• Highly visible yellow plastic caps

• Protects from sharp metal edges

• Suitable for star pickets and steel reinforcing bars

NUMBER: 06425616

A big range for all trades

Line Marking Paint (Machine) – 500g

• Fast drying acrylic paint

• Toluene-free formula

• Designed for use with the Dy-Mark Line Master and is ideal for marking on car parks, factories, warehouses, sporting fields and courts

0055 1225 White

0055 1242 Yellow

Spray & Mark Paint –350g

• Designed for inverted use with fast drying formula

• Bright colour range for highly visible marks

• Suitable for use in construction, landscaping, civil works and surveying

0471 4155 White

0055 1208 Yellow

Redline Wall Brushes

• Economical synthetic filament for use on all surfaces to achieve a quality finish

• Slimline design for light and comfortable use

• Ideal for all broad areas including ceilings, walls & floors, roofs, fencing and posts

0311 3150 25mm $1ea

0333 7907 38mm $1.50ea

0311 3184 50mm $2ea

$13ea

Line Marking Paint (Handheld) – 500g

• Fast drying acrylic paint

• Toluene-free formula

• Ideal for marking on car parks, factories, warehouses, sporting fields and courts

3059 White

3025 Yellow

Spray Writer Paint –350g

• Unique formulation reduces spray drift

• Marks wet surfaces without cracking and peeling

• Suitable for all natural and cut timber applications, forestry and timber processing industries 0065 8512 White

0342 Yellow

Line Marking Machine –4 Wheel

• Ergonomic design with built-in side line attachment

• Heavy duty steel construction

• Lightweight, removable handle for spot marking

PART NUMBER: 05462906

Spot Marking Handle –2 Wheel

• Lightweight aluminium construction

• Improves efficiency and makes application less fatiguing

• Suitable for use with Dy-Mark Spray & Mark paints

PART NUMBER: 05462940

Classic Roller Covers

• All purpose 10mm pile suitable for all oil and water based paints on smooth and semi-smooth surfaces

PART NUMBER: 00875755

Nook & Cranny Roller & Frame

• Long handled frame ideal for hard to reach places

• Handle threaded for use with extension pole

• 100mm Rollers are great for trim work around window and door frames

PART NUMBER: 00395654

Personal Protective Safety

• Kyorene Graphene fibre, provides a close fit for comfort and efficiency

• Lightweight 13 gauge knitted shell with nitrile foam palm coat for grip

• Lightweight 15 gauge knitted seamless liner made from polyester

• Touch screen compatible

• Nitrile foam coating provides grip and Level 5 dexterity

•

MaxiDex® 19-007

• ViroSan™ technology designed to prevent the proliferation of viruses which deposit on the glove

• Size: 7-11

STYLE CODE: 19-007

A big range for all trades

pair $7 pair

A NEW REALITY THAT PUSHES US TO RE-THINK HOW WE DEFINE SAFETY?

Today, working environments face new realities that threaten productivity, and these new realities are driving safety professionals to shift their thinking and take on new measures in ensuring their worker’s integral health.

ATG® Intelligent Glove Solutions takes performance and comfort to an entirely new level and an entirely new dimension by re-defining today’s glove safety and glove cleanliness.

WORLD FIRST

Introducing MaxiDex®, the world’s first hybrid glove. MaxiDex® takes the best of mechanical handling gloves, and the best of disposable gloves, and combines them into one outstanding glove that protects your hands, and your health.

MaxiDex® has a virucidal built-in to the glove coating via ATG®‘s proprietary technology platform, ViroSan™. ViroSan™ is designed to prevent the proliferation of viruses which may deposit on the glove while in use.

User comfort remains the key to keeping gloves on hands, so ATG® have also integrated AD-APT® Cooling Technology into the liner of MaxiDex® keeping hands cool, dry, comfortable and productive. With all-day use in mind, and minimising any need to remove the glove, MaxiDex® is also touchscreen compatible.

One recurring demand arises in any conversation about gloves; COMFORT.

Today 97% of glove wearers claim that comfort is their number one priority when choosing gloves, the key challenge being hot and sweaty hands.

For this reason, ATG® have added AD-APT® Cooling Technology into the liner of MaxiDex®. As the gloved hand moves and the temperature starts to rise within the glove, AD-APT® is activated, regulating the temperature. MaxiDex® with ViroSan™, enhanced glove hygiene for your hands to work in.

pair

MaxiDex® with ViroSan™, enhanced glove hygiene for your hands to work in. $1695 pair

$1995 pk

3M™ Mist

• Lightweight and comfortable

• Excellent cheek to frame coverage

• Anti-fog/Anti-scratch coating

07743949 Clear $5.50ea

07743983 Silver Mirror $6.05ea

01662795 Clear with dust guard $10.30ea

A big range for all trades

uvex i-guard planet

• Permanently anti-fog and scratch-resistant lens

• Recycled and bio-based materials

0316 7461 Glasses $18.94ea 0316 7478 Goggles $25.26ea

$100pk

uvex xact-fit – 50 Pairs

3M™ Econospecs

• Lightweight, economical, injection moulded, polycarbonate frame

• One piece contoured wrap around spectacle

• Capable of being integrated with other Personal Protective Equipment (PPE)

• Anti-scratch coating on both sides of all lenses increases lens durability

PART NUMBER: 06521003 $380 ea $12 ea

3M™ Whim Creek

• Injection moulded optical grade polycarbonate lens

• Temple arms designed to offer side shield protection

• Anti-Scratch coating on both sides

• Anti-Fog Coating

• Revolutionary design for optimum fit and improved wearer comfort

• Hygienic – no need to roll and touch earplug before insertion

• Rated SLC80 22dB(A): Class 4

PART NUMBER: 0149 8507

FROM

$326pk

Torpedo Earplugs

• Polyurethane foam to enable easy insertion and proper fit

• Tapered design with slow release foam

• 29dB Rating

Torpedo Metal Detect Corded Earplugs – Box of 100 Pairs

• Metal detectable ear plugs. Corded, disposable and user formable hearing protection

• Tapered design and softness for comfortable fit

• Slow release Polyurethane (PU) foam to enable easy insertion and a proper fit

• Blue in colour for visual identification in food processing environment

• 29dB Rating

BlueVenom XF190 Multi-Process Welder

• The BlueVENOM XF190 is the perfect solution for light fabrication, maintenance and repairs or for DIY around the home, workshop, worksite, or farm without compromising on quality, safety and performance!

• With the avid welder in mind, CIGWELD have introduced Opti-Start, a feature that allows the user to customise their starting arc characteristics through Soft and Hard Start controls

Cutmaster+ Plasma Cutter Series

• Portable and durable with three handles

• Ideal for Industrial and General Fabrication,

Fabrication, Industrial Production and Manufacturing 03743455 Cutmaster 40+ $2300ea

Cutmaster 50+ $2600ea 03743489 Cutmaster 70+ $2950ea

Pro Stick/TIG

Caddy Welder Series

• Stick/DC Lift TIG Inverter

• Power factor correction

• Ideal for fabrication/ maintenance/construction

Transmig 555i 3-Phase Remote Plant Multi-Process Welder

• Duty cycle of 555A @ 40% and 500A @ 60%

• Pre-programmed synergic lines

• Suitable for welding in category C environments, indoor and outdoor welding

• Applications include heavy fabrication, mining, oil and gas, civil construction, ship building and defence, structural steel set-ups, and repair and maintenance

PART NUMBER:

Warrior 500i Multi-Process Welder

• Weld Ready Pack comes with Warrior Feed 304, trolley, cables, and Tweco MIG torch

• Multi process – MIG, flux-cored, stick, live TIG start and ARC gouging

PART NUMBER: 03657898

$10,550

Weldarc 200 AC/DC Stick/TIG Welder

• 200A at 18V 30% duty cycle

• Welds up to 8mm aluminium or steel

• Packaged with an 8m TIG torch

PART NUMBER: 03650074

JBS MIG Wire – 15kg

• Copper coated solid wire

• Precision layer wound

• Suitable for MIG welding of mild steels

Weldmatic 250 Multi-Process Welder

• 250A at 26.5V 20% duty cycle

• Integrated wire feeder – Suits 5kg and 15kg spools

PART NUMBER: 03650159

WeldSkill Gasless Flux-Cored Wire – 4.5kg

• Self-shielded (gasless)

•

Weldmatic 500 Multi-Process Welder

• 500A at 39V 60% duty cycle

• Packaged with a 4 roll drive wire feeder, 10m interconnecting lead kit and trolley with drawer

PART NUMBER: 0365 0193

Kobe DW-50 Flux-Cored Wire – 15kg

• All positional flux-cored wire

• Excellent arc characteristics

• Ideal for pressure vessels and earth moving buckets

01883727 1.2mm $149ea 01883744 1.6mm $170ea

Powercraft 250M 4-in-1 Multi-Process Welder

• Weld Ready Pack includes: Power Source, MIG gun, TIG Torch, electrode holder, work clamp, cables, drive rolls (solid 0.6/0.8mm and 0.8/0.9mm), contact tip (0.9mm) and flow meter

• 4-in-1 industrial quality multi-purpose inverter-based 250 amp 240V/15amp compact welding machine suitable for all general fabrication, maintenance or repair work

• Capable of MIG (GMAW), Flux-cored (FCAW), Pulse AC/DC TIG (GTAW), Lift DC TIG, High Frequency AC/DC TIG and Stick (SMAW/MMA) processes

0371 7989 250M Welder $2999ea

0371 8023 250M Welder w/Wire Feeder $4199ea

Powertec MIG Welder Series

• Weld Ready Pack includes LF56D Advanced Wire Feeder (with ARCFX™ joint visualization technology), MIG Gun, Cables, Drive Rolls & Gas Regulator

• Digital welding current control for ease of use

• Automatic power-saving modes (standby/shutdown function)

• Suitable for industrial MIG applications

0153 4203 i350S $6900ea

0308 7782 i350S Water cooled $8150ea

01534220 i500S $8050ea

03087799 i500S Water cooled $9299ea

A big range for all trades

$2999ea

$6900ea

Oxygen/Acetylene Complete Gas Kits

Complete oxygen and acetylene kit for cutting up to 75mm and welding up to 10mm

Fully complies to Australian Standards

Available with bottom or side entry regulators

6537 Bottom entry

$479ea

Powercraft T-11 Gasless Flux-Cored Wire – 1.2mm x 15kg

• Versatile – multi-pass and all positional

• Easy to use – low spatter and easy slag removal

• Precision layer wound enhances smooth wire feeding

• Ideal for general fabrication, maintenance and repair, rural and DIY

PART NUMBER: 03087816

Primacore MW-71 Flux-Cored Wire – 15kg

• All positional flux-cored wire providing great arc stability & smooth bead appearance, even on out of position welds

0086 8415 1.2mm $135ea

0086 8432 1.6mm $130ea

Speedtec® Multi-Process Welder Series

• Air Cooled Weld Ready Packs come with power source, LF56D Wire Feeder, VRD, Cart, 10m interconnection cables, Powercraft 360 4m gun

• Water Cooled Weld Ready Packs come with power source, LF56D Wire feeder, VRD, Cart, CoolArc 60, 10m interconnection & water cables, Powercraft® 500W 4m MIG gun

0311 5169 400SP Air cooled $10,250ea

0311 5203 400SP Water cooled $10,550ea

03115186 500SP Air cooled $12,250ea

03115220 500SP Water cooled $12,550ea

Oxygen/LPG Complete Gas Kits

Complete oxygen and LPG kit for cutting up to 75mm and brazing up to 10mm Fully complies to Australian Standards. Available with bottom or side entry oxygen regulators – Rear entry LPG

0173 6894 Bottom entry

0218 9774 Side entry

Kobelco 7016 Low Hydrogen Arc Electrodes – 5kg

• Low hydrogen electrode for one sided welding of pipes and general structures of mild steel and up to 490N/mm² high tensile steel

• Arc stability is extremely good to perform one sided welding with relatively low currents

• Good slag removability and smooth weld beads

2.6mm $50pk

$10, 250ea

Regulators

Fully complies to Australian Standards

Available with bottom or side entry regulators

Fitted with gauge protectors

5 Year limited warranty

0173 6316 Acetylene Bottom entry

0190 4735 Acetylene Side entry

0173 6333 Oxygen Bottom entry

0190 4803 Oxygen Side entry

$72ea

Weldclass Portable Electrode Drying Oven – 5-10kg Capacity

• Used for both 5kg or 10kg applications

• Cylindrical chamber keeps electrodes in better condition and avoids flux chipping

• Lightweight (4.5kg) = reduced strain on operator

• Variable temperature control 50 – 200°c

• Commonly used with low hydrogen electrodes to eliminate moisture and maintain mechanical properties

PART NUMBER: 02905814

0308 7782

100 Tub

$320ea

Flexovit Depressed Centre Cut Off Wheel

• Size 125 x 3.4 x 22mm

• Fast cut reinforced depressed centre wheel for cutting off

• For steel and stainless applications

• Durable resin bond designed for fast cut while retaining excellent wheel life

PART NUMBER: 02921718

•

•

•

•

$3ea $990ea

Flexovit FH38 Flat Cut Off Wheel

• Fast cut reinforced straight wheel for cutting off

• For steel and stainless applications

• New label, New formulation, Longer life 02920816 125 x 2.5 x 22mm $3ea 01122107 230 x 2.5 x 22mm $4.90ea

Beartex Depressed Centre Rapid Strip Discs

• Designed for cleaning and conditioning before and after welding

• Suitable for rust, paint and epoxy coating removal

x

3M™ Speedglas™ G5-01VC Welding

Flexovit Low Speed Stationary Cut Off Wheel

Size 356 x 3.0 x 25.4mm

Fast cut reinforced straight wheel for cutting off For stainless steel, ferrous metals, bar & tubing

PART NUMBER: 02185619

$4ea

BlazeX F970X Fibre Discs – 125mm

• Improved ceramic alumina micro-fracturing grain

• Constantly exposes sharper grain edges

• Significantly increased cut-rate and life over blended/low-ratio ceramic alumina discs

03540849 36 Grit

03540866 50 Grit

03540883 60 Grit 03540900 80 Grit

3M™ Speedglas™ 9100 Air Welding Helmet with Adflo™ PAPR

• External button for grind and memory modes

• Extra large 73 x 107mm viewing area with peripheral SideWindows

• Adflo PAPR offers 8 hours protection (RMPF = 50)

PART NUMBER: 03056455

$20,500 ea

Shindaiwa® Diesel Engine Drive Welder Series

• Quality Shindaiwa

• Japanese designed and built

• 300A model single operator, 420/500A model dual operator

FROM

3M™ Cubitron II 982C

Fibre Disc – 125mm

• Designed for carbon steel applications,

• Superior throughput with less operator fatigue when tackling high pressure grinding applications

• 3M Precision Shaped Grain maintains super-sharp points that cut exceptionally fast with less pressure

0086 0191 36+ $3.99ea

0086 0208 60+ $3.85ea

0086 0225 80+ $3.60ea

FROM

3M™ Silver Cut Off Wheel • 3M™ Precision Shaped Grain

cut through pipes, tubes or flat sheets of stainless steel, mild steel, aerospace alloys and more

3M™ Cubitron II 982CX

Pro Fibre Disc ‒ 36G

• 3M™ 982CX Pro Fibre features re-engineered Precision Shaped Grain that cuts cooler, faster and lasts longer than conventional abrasive grains

• Use on carbon steel

3M™ Cubitron II 775L

Clean Sanding Disc – 150mm

• Revolutionary 3M™ Precision Shaped Grain technology provides fast cut and long life

• Produces finer finishes than conventional electrostatically coated abrasives

3M™ Cubitron II Cut Off Wheel

‒ 125 x 1 x 22.23mm

• 3M™ Cubitron™ II cut off wheels with Precision Shaped Grain are engineered to cut faster than competitive ceramic products, offering significant productivity gains

PART NUMBER: 04075843

JBS Ultra Thin Cut Off Wheels

• General purpose cutting wheel

• Fast, clean cutting and excellent life

• Suitable for cutting steel and stainless steel

Specification: A60TBF

JBS Mild Steel Grinding Wheel

• General purpose grinding wheel

• Excellent stock removal

• Suitable for use on many mild steel applications

• Specification: A24R-BF27

3M™ Scotch-Brite™ Clean & Strip Pro XT-DC Discs

Scotch-Brite™ clean and strip discs are an extra coarse grade, open-web disc engineered to effectively clean welds, remove rust and strip paint

Flap Discs – 125mm

T6-8 Bostitch Hand Stapler

• 6 – 14mm fastener length

• Nickel chrome plated steel magazine and core provides smoother, more durable sliding surface for staples

• Suitable for house wrap, tar paper, duct insulation (outward clinch) and cardboard tagging (outward clinch)

Respiratory Protection

7528 Welding Respirator Kit

Kit Contains:

• 1 x 3M™ Half Face Respirator 7500 Series – Medium

• 1 x pair 3M™ Particle and Metal Fume Filters 2128, GP2

• 2 x 3M™ Respirator Cleaning Wipes

• 1 x 3M™ Respiratory Protection Guide

• 1 x Handy Storage Container

PART NUMBER: 01900761

7500 Half Face Respirators

• Soft, Silicone facepiece for comfort & durability

• Drop down feature for added convenience during breaks

• Thin nose bridge area for reduced pressure and improved comfort

ea

7751 Series Spraying Respirator Kit – A1P2 Kit Contains:

• 1 x 7500 Series Half Face Respirator

• 1 x pair of 6051 A1 Cartridge, 2 x pairs of 5925 Particulate Filters P2

• 1 x pair of 501 Filter Retainer

• 2 x 504 Respirator Cleaning Wipes

Small

Medium

Large

• Combine with a broad range of lightweight 3M™ filters or cartridges to provide respiratory protection against particulates and a variety of gases and vapours

04127862 Small

04127947 Medium

04127998 Large

Aura™ 9322A+

Disposable Respirators – P2

• Embossed top panel of the respirator helps to reduce fogging of eyewear

• Can provide protection against thermally generated particulates (P2)

• Box of 10

PART NUMBER: 03576621

6259 Multi Gas Respirator Kit –A1B1E1K1P2

Kit Contains:

• Facepiece

• Protection Guide

• 1 x pair of 3M™ Multigas Cartridge A1B1E1K1

• 2 x pairs of 5925 Particulate Filters P2

• 1 x pair of 501 Filter Retainer

• 2 x 504 Respirator Cleaning Wipes

00795502 Small 01900846 Medium

00795519 Large

Half Face Respirators – 6500QL Series

• Reusable respirator with quick latch drop down mechanism for easy on and off as wearers move in and out of contaminated areas

• Resilient silicone face seal helps provide comfort, durability, and stability with a soft but firm seal

• Exhalation valve cover helps direct exhaled breath and moisture downward to reduce fogging of eyewear and grinding and welding shields

• No need to remove your safety helmet or face shield when lowering or raising your respirator

04129818 Small

04129835 Medium

04129852 Large

6051 Filter Cartridge – A1

• 3M™ Bayonet connection system ensures precise and secure locking

• Low profile and well balanced twin cartidge/filter design

• Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000 Series Full Face Respirators

PART NUMBER: 01068389

5925 Particulate Pre – Filter – P2

• 3M™ Bayonet connection system ensures precise and secure locking

• Low profile and well balanced twin filter design

• Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000 Series Full Face Respirators

• Box of 10

PART NUMBER: 02030488

Key Highlights:

• User-friendly design features visual and audible alarms

• Pre-calibrated design is ready to use out of the box

• Headgear used as part of certain PAPRs can accommodate workers with limited facial hair and prescription eyewear

• Includes headgear with cap lamp bracket (excludes lamp) PAPR, breathing tube, battery, charger, filter, airflow indicator, pre-filter, filter cover, and belt; Some styles may include additional accessories

2249ea

CST PRO Power System

• PAPR technology without the belts or hoses

• Breath-responsive powered airflow system driven by AirSensit® technology

• Extended battery time (up to 14 hours)

• Access to the most recently logged information on your CST respirator when connected to the CleanSpace SMART App

PART NUMBER: 03652896

CST Ultra Power Unit

• Lightweight sleek & durable design

• Breath-responsive powered airflow system driven by AirSensit® technology

• Access to the most recently logged information on your CST respirator when connected to the CleanSpace SMART App

• Mask sold seprately

PART NUMBER: 03652913

CST Full Face Mask

• Visor: Scratch-resistant and solvent-resistant coating

• Wide panoramic visor

• Silicone cushion seals to the face for optimum protection and comfort

PART NUMBER: 03652998

CST Half Face Mask

• Lightweight, comfortable and durable

• Soft silicone that readily molds to the face

• Easily removable exhalation valve for cleaning

03652947 Small 03652930 Medium 03652964 Large

CST Standard Particulate Filter – P3

• Used with the revolutionary CleanSpace ULTRA and CleanSpace PRO PAPR

• Suitable for protection against airborne particulate (dust, mists and fumes)

• Easy and quickly fitted and removed from the power unit

PART NUMBER: 03653015

7700 Half Face Respirator

• Made from 100% medical grade silicone, the wide sealing area provides exceptional fit and comfort

03011065 Small

02216842 Medium

03011082 Large

7700 Half Face Asbestos/ Silica Respiratory Kit – P2

• Silicone half mask is latex free and easy to wear and adjust

• Contains half face silicone mask, along with filter sets for applications where users are working around asbestos contamination, or suspect asbestos in the working area

04037304 Small

04037389 Medium 04037321 Large

N7500 P2/P3 Pancake Filters

• Low profile design allows use under most welding helmets and face shields

• Suitable for protection against dusts, mists and fumes

• Pack of 20 (10 pairs)

02216927 Filter P2/P3 $165ea 02216944 Filter P2/P3 OV $198ea

SR100 Half Face Respiratory Kit

Kit includes:

• 1 X SR100 Half silicone mask, 1x Particulate Filter P3 SR510, 5 x Pre-filters (221-1)

• 1 x Pre-filter holder, 1 x Cleaning napkin, 1 x Storage container

01060668 S/M

01060685 M/L

01060702 L/XL

SR500/580 PAPR System

• SR500 Fan Unit, Standard Battery, Charger, Belt

• SR580 Helmet with hose

• 2 x SR510 particle filters & 10 x SR221 Pre-Filters

PART NUMBER: 0284 3645

• 2 x Filter Adaptors, 2 x Pre-Filter Holders

• Gas filters sold seperately

Workplace Safety

Sqwincher® Zero Sugar Sqweeze Pops – 10 Pack

• Sugar free & gluten free – electrolyte replenishment freezer pop Hydration made easy – just freeze and serve 5 Flavour pack – get 10 freezer pops each of dragonfruit, orange, punch, mixed berry and watermelon

PART NUMBER: 03097812

Sqwincher® Qwik-Stiks Mixed – 50 Pack

• Electrolyte enhanced beverage for effective hydration

• Sugar free with zero calories Low sodium, caffeine free and gluten free Great taste for increased fluid consumption Add one sachet into a 600ml drink bottle with water, shake and drink Convenient single serve packaging for portion control

PART NUMBER: 0062 0729

$598ea

General Purpose Spill Kit – 120L

• Easy to use pads, pillows and socks make clean-up of spills quick and easy

• General Purpose absorbs both oil and water based liquids

• Absorption capacity up to 120L

PART NUMBER: 01950690

Drum Bunds

• Portable, safe and convenient way to store drums and IBCs

Oil & Fuel Spill Kit – 240L

• Easy to use pads, pillows and socks make clean up of spills quick and easy

• Absorption capacity up to 240L

PART NUMBER: 01950758

• Tough polyethylene bund with polypropylene grate(s) stands up to the harshest environments

• Has a removable grated floor for draining, easy cleaning or debris removal

• Bund can be picked up with a forklift

0310 9869 2 drum, 124cm x 64cm x 51.5cm $495ea

0397 2533 4 drum, 123cm x 123cm x 28cm $510ea

Flammable Liquid Safety Cabinets

• Designed to securely store Class 3 flammable liquids

• Heavy duty, powder coated steel double wall construction with 40mm thermal barrier

• Manufactured in Australia in accordance with AS1940-2017

$14ea

Cooler Jugs

• Robust body and base

• Smooth handle

• Drinking cup on top

• Non drip tap – 5L only

01949245 2.5L, Hi-vis Orange $14ea

07762419 2.5L, Blue $14ea

01949228 5L, Hi-vis Orange $22.50ea 09598814 5L, Blue $22.50ea

$119pk

Sorbent Pads

• Absorbs only oil based (hydrocarbon) liquids on land or water

• Will not absorb water based liquids

• Absorbs up to 0.8L for 300gsm pads

• 40 X 50cm, pack of 100

PART NUMBER: 01628642

Aerosol Storage Cages

• Heavy duty, powder coated steel construction

• Designed to securely store aerosol cans

• High open area perforations provide natural ventilation in accordance with Australian Standards

Manual Handling & Storage

$990ea

Polypropylene Storage Crate and Lids

• Heavy duty industrial storage crates and lids

6684 32L Crate, Blue $18.95ea

6701 52L Crate, Blue $20.90ea

$295ea

Heavy Duty Rivet Shelving

• Four adjustable height shelves with steel wire mesh

• 1200kgs total weight loading evenly distributed

• Grey hammertone powdercoated frame

• Shelf support included

• H1830 x W1820 x D472mm

PART NUMBER: 03279563

Metal Lockers

• Ideal for storage applications in warehousing, stores and service environments

100mm Polyurethane Castors

• Non-marking polyurethane wheel

• 120kg load capacity

06832205 Fixed $12.95ea

06832239 Swivel $14.95ea

06832188 Swivel/Brake $17.95ea

Heavy Duty Platform Trolley

• Ideal for moving large, heavy, oversized loads efficiently throughout a facility with up to 907kg load capacity

• Virtually maintenance-free –Powder-coated steel creates a hard finish that is far tougher than conventional paint

06769781 L914 x W610mm, 454kg $859ea

06769798 L1219 x W610mm, 907kg $895ea

0279 2870

Storage Cupboards

• Welded steel construction with triple action lock and key

• Component cupboard with one wide fixed shelf, two narrow fixed shelves and tall locker (0279 2904)

2870 Flat top $996ea

2904 Slope top implement $1079ea

2887 Slope top $1079ea

Long Span Container Rack

• Premium longspan frames and beams

• 16 x Fischer 24L recycled plastic bins included

• Concealed hold upright frames –rear fitted beams

• Footplates and beam safety clips included

• H2100 x W1940 x D450mm

PART NUMBER: 03499114

125mm Rubber Castors

• 105kg load capacity

• Durable, non-marking rubber

06832256 Fixed $13.95ea 0683 2290 Swivel $18.95ea

06832120 Swivel/Brake $15.95ea

Side-Panel Platform Trolley

• 20cm TPR castors

• 600 x 1200mm, 907kg load capacity

• Duramold's exclusive, precision engineered resin and metal composite structure provides maximum load support

• Side panel cutouts allow easy access to load

PART NUMBER: 08622900

P Handle Trolley

• Light duty trolley with P handle, for easy one hand manoeuvring

• Puncture proof poly rim wheels for a smooth ride whilst eliminating expensive downtime

• 150kg Load capacity

PART NUMBER: 02135650

Sheet & Panel Trolley

• 907kg load capacity, features built-in tie-down slots and textured surface reduces slippage

• Transports bulky goods such as doors, plaster & tables

PART NUMBER: 08622832

Lifting & Rigging

Synthetic Round Slings

• Heavy duty outer casing for extra damage resistance

• Colour coded to meet international lifting standards

• Supplied with test certificate

• Suitable for use with cranes, hoists and blocks

• Complies with AS 4497:2018

• Additional sizes available

Lever Blocks – 0.25t

• 0.25t with 1m lift

• Brake engages at maximum 3% of Working Load Limit

• High visibility colour contrast connecting points

• 2.4kg – Compact and lightweight

• Suitable for mining, underground, construction, rural and industrial

• Complies with AS 1418.2

PART NUMBER: 03348226

Ratchet Tie-downs

• Versatile load restraints for diverse applications

• Suitable for use in the transport industry

• Complies with AS/NZS 4380:2001

0035 9635 36mm x 6m, 0.6t, S Hooks $13.95ea

0589 1629 50mm x 9m, 2.5t, Hook & Keeper $29.95ea

0155 2210 75mm x 9m, Hook & Keeper $94.95ea

Bow Shackles

Grade S – Galvanised Complies with AS 2741:2002

Lifting Point – Grade 100

• De-centered long bolt

• Metric Thread

• 'Stay-up' function

• Bolt, nut and washer according to ISO898-1 Class 10.9

02599151 M8, 0.35t, 98mm $106ea

02599168 M10, 0.65t, 98mm $123ea

02599185 M12, 1t, 118mm $142ea

02599202 M16, 1.8t, 158mm $164ea

02599219 M20, 2.6t, 198mm $209ea

02599236 M24, 4.1t, 238mm $232ea

Sisal Rope

04704001 8mm x 250m $0.46ea

04704205 10mm x 250m $0.62ea

04704302 12mm x 250m $1ea

04704506 16mm x 250m $1.72ea

04704700 20mm x 250m $2.60ea

Polypropylene Rope

• Tough, extremely strong and easy to work and knot

• UV Stabilised with excellent weathering properties

• Suitable for marine, construction, mining, rural, commercial fishing and petroleum industries

00668287 6mm x 250m $50ea

04966693 10mm x 250m $100ea

05169864 12mm x 250m $130ea

CRC® Brakleen

• Fast Evaporation

• Minimizes downtime associated with “clean-in-place” cleaning methods

• Residue Free. Prevents harmful buildup and eliminates rinsing or wiping

• Non-staining, and non-corrosive

0372 1579 400g Brakleen Non-Chlorinated 5084 $13.50ea

0154 5937 400g Brakleen Force 5085 $13.50ea

0417 8761 500g Brakleen Non-Flammable 5087 $13.50ea

0440 4301 500g Brakleen 5089 $13.50ea

0194 8276 20L Brakleen Force 5086 $143ea

$715ea

CRC® 5-56 – MultiPurpose Lubricant

• Penetrates - Breaks away rust and corrosion, freeing components bonded by dirt and scale, allowing things to work again, 270g now with Permastraw

04460206 175g $7.15ea

02900204 270g $10.45ea

03968204 400ml $9.75ea

CRC® Belt Grip

• 400g Aerosol

• Tacky, non-drying film

• Minimises drive belt slippage, resists water wash off, maintains belt flexibility and prevents loads from slipping on conveyor systems

PART NUMBER: 02938112

WD-40® Multi-Use Product

• Protects metal surfaces from corrosion by displacing moisture

• Lubricating additives to eliminate squeaks on moving parts

• Penetrates metal bonds and frees stuck, frozen or rusted metal parts

• Lifts dirt, grease and tar

0396 5809 300g $10.55ea

00679779 425g $13.35ea

01374012 4L Bottle $58.50ea

01373978 20L Drum $210ea

WD-40® Specialist Range

• Professional-grade range of lubricants, greases, silicone and cleaners for industry-specific jobs

CRC® Lithium Grease

• Water and corrosion resistant Formulated with anti-oxidation, anti-rust, and anti-wear additives

00549423 300g White $12.60ea

02940358 300g Red $13.75ea

PART NUMBER: 03692285 $18ea

150g, Anti-friction dry PTFE lubricant $19.50ea

300g, High performance silicone $13ea

0024 300g Lanolin $14.20ea

400ml, Fast Release Penetrant $21ea

WD-40® 3-IN-ONE Multi-Purpose Oil –120ml

• Specially formulated lubricant with spout applicator for precision application

• Protects surfaces from rust and corrosion

Adhesives & Lubricants

Samoa 20V Lithium-Ion Cordless Grease Gun

• Supplied with 2 x batteries, charger & carry case

0178 3831 400g, 430A $799ea

0178 3814 450g, 630A $630ea

Samoa 20kg Grease Kit

Handles high density, tacky greases up to NLGI2

PART NUMBER: 04499966

Samoa Grease Control Valve Rigid Extension Max working pressure 7,150psi

PART NUMBER: 0006 0588

iCan 10L Container Kits

• Manufactured in high density HDPE

Loctite® 401 Instant Adhesive

Universal instant adhesive Bonds a wide range of substrates

0125 2957 25ml $23.10ea

0520 1105 100ml $110ea

0546 8567 500ml $495ea

Loctite® 460 Instant Adhesive – Low Odour/ Bloom – 25ml

• Low odour low bloom for cosmetic applications

• Well suited to porous substrates

PART NUMBER: 0172 5456

Shell Grease Gadus

S2 V100 2 – 450g

• Suitable for centralised lubrication systems operating at normal temperatures

PART NUMBER: 00947078

Loctite® 406 Instant Adhesive

Rapid bonding of plastic and rubber, including EPDM Low viscosity

Loctite® 480 Instant Adhesive

• For applications where shock resistance is required or shock or peel loads are present

• Ideal for bonding metal to metal, to rubber or magnets

Shell Grease Gadus

S2 V100 3 – 450g

• Suitable for centralised lubrication systems operating at normal temperatures

PART NUMBER: 0106 8475

Loctite® 454 Instant Adhesive

• Universal instant adhesive gel

• Especially suited to porous materials

Loctite® 3090 Instant Adhesive – 2 Part 10g

• Gap filling up to 5mm, gel consistency

Shell Grease Gadus

S2 V220 2 – 450g

• Ideal for rolling elements, plain bearings as well as hinges, sliding surfaces in most industrial and transport sectors

PART NUMBER: 0094 7197

Shell Grease Gadus

S3 V220C 2 – 450g

• Suitable for bearings operating at high temperatures and under load

RTD Liquid Metal

Cutting Lubricant

• Medium viscosity high performance metal cutting lubricant for machining operations on a range of metals

0438 4502 500ml $42ea

0438 3406 5L $285ea

0047 9806 20L $880ea

Sikaflex® 11FC ‒310ml

• Multipurpose sealant

• Can bond multiple substrates

1271 Black

3665 Grey

1288 White

$25ea

Simson 70-03 – 600ml

• A high quality elastic sealant/adhesive based on Silyl Modified Polymers (SMP)

• Suitable as adhesive or sealant for structures in industrial applications requiring high strength

• Excellent resistance to UV, weather and temperature and is free of solvents, isocyanates and silicone

4402 Black

4419 Grey

4368 White

PG450 Battery

Operated Grease Gun

• Gun supplied with 2 x 18V Li-Ion batteries, charger, 1m long flexible extension and KY Super grip coupler

RTD Compound Metal

Cutting Lubricant

• Metal cutting lubricant in paste form for machining operations including reaming, tapping and drilling

0446 1700 500g $33ea 0438 3202 2.5kg $132ea $33ea

Sikaflex® 221 ‒310ml

• Potable Water approved (AS4020)

• Rail Fire approved (EN45545-2 R1/R7 HL3)

FROM

$1980ea

Simson ISR 70-05 AP Silyl Modified Polymer

Flaw Finder Kit – 3 Part

• 3 step process cleaner, dye and developer kit for detecting cracks in welded joints and integrity testing of engineering components

PART NUMBER: 0097 7405

Sikaflex® 252 ‒300ml

• Bonds well to a wide variety of substrates

• Capable of withstanding high dynamic stresses

• Vibration-damping

PART NUMBER: 01247603

FROM

Switch Plate

Lubricant Spray (SPS3)

• Dry film lubricant for use on railway switch plates.

• Dries quickly to a strongly bonded film of high-grade graphite

PART NUMBER: 0654 4293

Sikaflex® 291 Marine Sealant – 310ml

• IMO approved

• Many substrates

• Non-corrosive

$1320ea

Bostik RTV 922 Industrial Sealant – 300g

• Single component, acetic cure, high strength, industrial grade silicone sealant

• Makes formed in place gaskets for gearboxes compressors and pumps, heavy industrial pipes and flanges

1850 Transparent

1884 Black

Contractor Mop Refills

Mop Handle

• Aluminium lightweight handle

• Ideal for heavy duty commercial use

• 1.35m x 25mm

PART NUMBER: 01448815

Roller Wringer Mop Bucket

– 15L

• Heavy duty lightweight plastic

• Ergonomic, easy action plastic wringing system with non-slip foot pedal

• Non-marking castors provide greater manoeuvrability

PART NUMBER: 01234258

Garbage Bag

Aerogard® Tropical Strength Insect Repellent

• Helps protect against disease carrying insects, including mosquitoes that may spread Malaria, Ross River Fever and Dengue Fever

• Provides six hours protection against mosquitoes, sandflies, flies, leeches, ticks and other biting insects

• Contains DEET

Aerosol $9ea

7110 150g Aerosol $12.50ea

Mortein® Surface Spray – Odourless

Low irritant and odourless; kind to sensitive noses

Formulated to kill cockroaches and other crawling insects fast

0971 8018 250g Aerosol $12.50ea

0374 3815 350g Aerosol $14.50ea

Bin Liners

• Tough high density polyethylene

• Tight seals ensure no messy leakage of contents

• Suitable for tough waste containment in industrial, healthcare and hospitality industries

0058 1349 120L, 200 pack $89ea

4755 240L, 100 pack $59ea

Aerogard® Repellent –135ml

• Provides up to four hours protection against mosquitoes, flies, sandflies and other biting insects

• Low irritant and non-greasy formula

• Suitable for children 12 months and over

PART NUMBER: 02269796

Mortein® Flying Insect Killer

Multi-purpose spray for direct kills or as a surface spray for flying and crawling insects

Suitable for use on flies, cockroaches, spiders, ants, mosquitoes, moths and silverfish

0140 7760 250g Aerosol $7.50ea

0132 7911 350g Aerosol $8.50ea

Mortein® Low Irritant Fly Spray

• Multi-purpose spray for direct kills or as a surface spray for flying and crawling insects

• Suitable for use on flies, cockroaches, spiders, ants, mosquitoes, moths and silverfish

PART NUMBER: 0977 0810

Toilet Tissue

• FSC® Mix

• 400 Sheets

• 2 Ply

• Carton of 48

PART NUMBER: 04041282

• Soft 2ply Jumbo

• Advanced quality;

• Reverse roll feature ensures no waste

• Dual locking feature prevents pilferage

• Suits Tork T1 Jumbo toilet rolls

Instant Foam Hand Sanitiser

• Built-in skin conditioners leave hands feeling soft and smooth

• No water required

• 250ml Pump pack

PART NUMBER: 07717004

•

•

A big range for all trades

Tork® Advanced Soft Conventional Toilet Roll T4

• Soft and thick 2ply toilet paper

• Case contains 48 x 400 sheet rolls per case

• Individually wrapped for hygiene and appearance

• FSC certified 03054329

Tork® Toilet Tissue Dispensers T4

• Suits Tork Conventional Toilet Rolls 08172213 $48ea

3 in 1 Surface Spray Disinfectant

• Reduces odours

• Surface spray disinfectant

• Hospital grade

• 325g

00239381 Outdoor Scent 00239398 Garden Fresh

• Ready-to-use

• Fresh subtle scent

• Suitable

Facial Tissues

• FSC® Mix

• 2 Ply

1333 90 Sheets $1.00ea

Sheets $1.10ea

Tork® Xpress Multifold Hand Towel H2

• Tork H2 Universal single ply towel is absorbent for fast, effective hand drying

• Single sheet one at a time dispensing hand towel reduces paper usage and waste

• FSC certified 02353046

Antibacterial Wet Wipes

• Fresh citrus scent

• Cloth size: 21 x 22cm

• Pack of 100 Wipes

PART NUMBER: 01145396

Tork® Xpress Multifold Hand Towel Dispenser H2

02710892 $80ea

Heavy Duty Antibacterial Wipes

• Pack of 10

• Pre cut sheets

• Durable, highly absorbent non-woven cloth

PART NUMBER: 04042608

Office, Tapes and Packaging

$250pk

Permanent Marker –

Bullet & Chisel Tip

• Ideal for permanent marking on most surfaces, including metal, glass, wood and ceramic

• Alcohol based, low odour ink

• Ventilated cap with pocket clip for ease of transport

$160pk

Highlighters

• Water-based quick dry ink

• Stubby style, chisel tip

0006 1306 Blue, 10 pack $3.85pk

00061323 Green, 10 pack $3.85pk

00061289 Orange, 10 pack $3.85pk

00061272 Pink, 10 pack $3.85pk

00061340 Yellow, 10 pack $3.85pk

00061357 Assorted, 5 Pack $1.60pk

A4 Clipboards

• Quality and durable material

• Strong metal clip, holding paper and pen securely in place

• Fit for A4 paper size

0006 7800 Aluminium $11ea

0006 7817 Masonite $4.20ea

0006 7783 Black $23ea HOT PRICES

$175pk

Whiteboard Marker –Bullet Tip

• Assorted colours, including black, blue, red and green

• Quick drying, low odour ink

• Pack of 4

PART NUMBER: 00061969

Capped Ballpoint Pens

• Capped, with rigid grip

• Ultra low viscosity ink formula for a smooth writing experience

• Pack of 12

0006 1238 0.7mm, Black

0006 1221 0.7mm, Blue

0006 1204 0.7mm, Red

We have refined a broad range of industrial masking needs into a single line of easy-to-choose tapes

STOCK CLEARANCE

Workhorse Workwear is exclusive to Blackwoods. Scan the QR code to view our range today or contact our team to discuss how we can work with you.

MSH065 Two Tone High Visibility Polo –Long Sleeve

• 185gsm, Cotton/Polyester micro-mesh with Cotton back

• Three button centre front placket

• Double stitch for reinforcement

• Front pockets with pen partition

• Rib collar and cuffs

• Colour : Yellow/Navy & Orange/Navy

• Sizes: S – 5XL

MSH066 Two Tone High Visibility Polo –Short Sleeve

• 185gsm, Cotton/Polyester micro-mesh with Cotton back

• Three button centre front placket

• Double stitch for reinforcement

• Front pocket with pen partition

• Rib collar and sleeve hem

• Colour : Yellow/Navy & Orange/Navy

• Sizes: S – 5XL

MST003 Cargo Shorts

• 270gsm, 100% Cotton drill

• LHS phone pocket

• RHS multiple tool partitions

• Colour: Navy

• Sizes: 72

A big range for all trades

• Advanced Multi-Purpose lubricant for smooth action

• Stops and attacks rust

• Displaces moisture

• Penetrates quickly

• Exceptional lubricant with a tough adhesive quality

open gears, pulleys, wire ropes and conveyors

• Resists cold, hot and saltwater

wash-o and high temperature sling o

• Reduces wear and friction

COMMITTED TO SUPPORTING BUSINESSES SINCE 1878

So

Rechargeable Work Lights

• Mini work light with floodlight plus spotlight

• Robust plastic housing with non-slip surface structure

0371 0645 W4R, 220lm, Spot beam $79ea

0371 0662 W5R, 600lm, Spot beam $110ea

0371 0679 W6R, 500lm, Spot beam $129ea

0371 0696 W7R, 600lm, UV LED $169ea

Rechargeable Work Clip-Light – 220lm

• Ultra-compact with two brightness levels

• Flexible mounting via robust clip or magnet

• Transport lock prevents light from being accidentally turned on

PART NUMBER: 03710594

Energizer® HD Series Headlights

• Each LED headlamp features multiple light modes for lighting flexibility

• Up to 40hrs run time

• Pivoting head

03637324 HDL10, 250lm, 60m Beam $25ea

03637341 HDL20, 325lm, 75m Beam $40ea

03637358 HDL30, 400lm, 80m Beam $50ea

Energizer® HD Series Waterproof Headlights

• Handsfree lighting for every situation and requirement

• 500lm

• 75m Beam

03564071 HDL40, 5 Light Modes $59ea

03564088 HDL50, 6 Light Modes $65ea

Rechargeable Work Headlights

• Natural colour rendering and neutral white, flicker free light

• Magnetic charging

• Advanced focus system

0136 0174 H5R, 500lm, 200m Beam $199ea

Rechargeable Work Torches

0143 3019 P5R, 25hrs, 480lm $179ea

0143 3036 P7R, Up to 60hrs, 1200lm $279ea

• Chromated pressure die-cast LM6 marine grade aluminium body with black powder coated paint finish

• 250W

Energizer® HD Series Waterproof Headlight – Hybrid Powered

• HDL60, 575lm, 75m Beam

• 7 Light Modes

PART NUMBER: 03564105

In-line Bottle Jacks

• Machined and polished cylinders with die-cut threads provide non-abrasive and leak-free durable performance

• Hydraulic system protected from internal damage by patented bypass mechanism

0094 6585 BSI2000A, 2T $69ea

0094 6568 BSI4000A, 4T $79ea

0094 6602 BSI6000A, 6T $99ea

0094 6551 10120A, 10T $129ea

Heavy

In-line Bottle Jacks – Squat

• Hydraulic system protected from internal damage by patented bypass mechanism

0094 6653 10128A, 10T $129ea

0094 6670 10208A, 20T $169ea

Pneumatic

Mechanical & Hydraulics

SCAN TO LEARN

The Offline Filtration Trolley is a mobile oil service unit used to filter oil when filling systems or transferring hydraulic, lubricating fluids; it is also used to filter current tanks. Its applications are for hydraulic and lubrication oil systems in a variety or industries, such as mining, power generation, steel industry and many others.

Offline Filtration Trolley

Features:

• Detachable filter unit with carry handle

• Viscosity range: 16 to 200 est

• Max. flow rate: 20 I/min

• Operating pressure: 3.5 bar max.

• Pump type: gear pump

• Fluid temperature: O – 80°C

• Permitted operating fluid:

mineral oils

• Element: 1O µ supplied with unit

PART NUMBER: 0281 7431

Offline Filtration Trolley

Features:

• Detachable filter unit with carry handle

• Viscosity range: 16 to 3000cSt

• Max. flow rate: 7l/min

• Operating pressure: 5 bar max.

• Pump type: gear pump

• Fluid temperature: 0 – 80°C

• Permitted operating fluid:

mineral oils

• Element: 1O µ supplied with unit

PART NUMBER: 0280 9016

HIGH VISCOSITY

Enerpac® Hydraulic Pump Turbo II –PATG Series – Air-Powered – Foot or Hand-Operated Treadle – 700 Bar – 2L

3-Position treadle for cylinder advance-hold-retract Operating air pressure enables pump to start at extremely low pressures Providing power and speed while minimising noise levels

PART NUMBER:

Pumpmaster Flowmate Engine

Drive Pumps

A big range for all trades

Enerpac - a renowned global market leading manufacturer in highpressure hydraulic tools and components, makes them the perfect fit with Blackwoods in Industrial maintenance, infrastructure, manufacturing, mining, power generation, oil & gas and more.

Enerpac® Hydraulic Pump – P-Series –Lightweight – Two-Speed –Hand-Operated – 700 Bar – 901cu-cm

2-Speed operation reduces handle strokes by as much as 78% over single speed pumps under no load Internal pressure relief valve for overload protection Lightweight handle lock makes it convenient to carry

PART NUMBER: 09709810

• Flowmate series are rugged and durable clean water transfer pumps

• Honda powered, compact and portable units deliver good flows and heads

• All units are mounted in heavy duty roll frames with anti-vibration mounts and are supplied with complete nut/tails, strainer and an engine tool set

• Suitable for farm use, tank to tank transfer, irrigation, fire fighting and storm water drainage applications

00778859 Max. Flow 600L/min / Max. Head 30L/min $890ea

0077 8876 Max. Flow 1100L/min / Max. Head 27L/min $990ea

Enerpac® Portable Hydraulic Tool Set – Black/Yellow – 10 ton

• Portable, complete and ready to use hydraulic set

• Includes a 10T single-acting cylinder, 2 speed lightweight hand pump, gauge assembly and a 1.8m hose, supplied in a lightweight tool box

• Suitable for workshop and general maintenance

PART NUMBER: 03420102

$1590ea $939 $2790ea $890ea

Pumpmaster CS Series Stainless Steel Horizontal Multistage Pumps

• Quiet, reliable and efficient range of horizontal multistage pumps

• Liquid temperature range 0 to 90°C

• Stainless Steel Grade 304 construction

• Suitable for domestic/residential and industrial/commercial environments

Max. Flow 94L/min / Max. Head 84L/min $890ea

Max. Flow 102L/min / Max. Head 92L/min $1060ea

$590ea

MULTI-PURPOSE FULL FLOW BALL VALVES

Polypropylene Ball Valves are suitable for a broad spectrum of applications including potable water, non potable water and a range of chemical applications