Section 19 - Hull, Deck & Cabin Hardware by BLA

section

Railblaza Mounting System Anodes Bow Rollers Bollards & Hawse Pipes Cleats Deck Fillers Bungs & Drain Plugs Scuppers Slop Stoppers & Rigging Flanges Rod Holders Transducer Brackets, Ski Hooks & Stanchions Locks, Cabin Hooks, Latches & Door Catches Hinges Lift Rings, Handles & Hatch Supports Drink Holders Mirrors & Glove Boxes Steps & Boarding Ladders Edge Trim & Canopy Fittings Rail Bases, Rego Numbers & Letters

310-313 314-321 322 322-323 323-325 326-327 328 329 330 331-335 336 337-347 348-352 353-355 355-356 356 357 358-362 362

www.bla.com.au

HULL, DECK & CABIN HARDWARE

309

section

HULL, DECK & CABIN HARDWARE

Railblaza Mounting System and Accessories StarPort™ The Railblaza™ StarPort™ system allows the user to easily and effectively add a wide range of accessories by installing the StarPort™ receptor in appropriate areas on any vessel or vehicle. The key to the system are the StarPort™ low profile mounting receptors. The practical and simple integral locking slide secures all accessories firmly in place while the gasket and bung reduces water ingress. The StarPort™ system is a practical, multi-functional and inexpensive way of adding accessories to walls, rails and decks. The StarPort™ system allows a wide range of uniquely designed robust accessories to be easily mounted on boats, kayaks, utility vehicles or ATV’s.

TracPort™ The TracPort™ system is an extruded aluminium support channel which when mounted has the ability to span across pipes, hoses and wiring looms, maximising useable space. By utilising its compatibility with the StarPort™ range of interchangeable accessories, including eyes, hooks and G-Holds, TracPort™ provides almost infinite user possibilities. The TracPort™ system is ideal for engine room installations, transom garages and a myriad of other every day uses. TracPort™ is designed to float above insulation and provides a strong, versatile framework to hold a wide range of essential engine room appliances such as battery switches, pumps, fuel filters and more. TracPort™ provides the ability to simply add, remove and move items when required and at any time. All products are attractively clam packed or header carded for easy hang sell display.

310

Quality marine equipment

section

TracPort™ StarPort™ TracNut™ Combo

The Railblaza TracPort™ system is ideal for use in engine rooms, transom lazarettes and a myriad of other every day uses. For engine room installations TracPort™ is designed to float above insulation and provide a strong, versatile framework to hold a wide range of essential appliances such as battery switches, pumps, fuel filters, battery chargers etc. TracPort™ provides the ability to simply add, remove and move items without having to cut into more insulation. The TracPort™ system has the ability to span across pipes, hoses and wiring looms maximizing useable space. The TracPort™ system utilizes its compatibility with the Railblaza StarPort™ range of handy interchangeable accessories, including eyes, hooks, G-Holds and adjustable platform mounts. TracPort™ extrusions are available in standard 500mm (195700) and one metre (195704) lengths and can be joined to create infinite lengths to suit almost any application or placed in parallel to support heavier items. Supplied complete with end caps, stand offs, infill and associated fastenings.

Kit comprises one StarPort™, one TracNut™ and associated fastenings. Allows the StarPort™ to be conveniently positioned within the TracPort™ allowing the full range of StarPort™ accessories to be utilised.

BLA Code 195740

TracPort™ Joiner Kit The TracPort™ joiner kit allows you to simply and neatly add another extrusion inline with an existing TracPort™. Kit comprises one TracPort™ joiner, two stand off’s and one end cap.

BLA Code 195700 195704

Length mm 500 1000

BLA Code 195720

TracPort™ Mount Pads

TracNut™ Kit

Can be positioned at any point on the TracPort™ extrusion allowing equipment to be screwed or bolted to the pad. Ideal to bridge equipment along a length of the TracPort™.

The TracNut™ sits within the extruded TracPort™ allowing the mounting of accessories such as mounting pads, custom fittings or StarPort™’s. Supplied in a pack of two with associated fastenings.

BLA Code

Size mm

195730 102x70x10 195734 150x70x10

HULL, DECK & CABIN HARDWARE

Railbaza TracPort™ System

BLA Code 195724

www.bla.com.au

311

section

HULL, DECK & CABIN HARDWARE

Platform Mounts T/S StarPort™

Flag Poles

Adjustable neck ensures a flat surface is maintained in any orientation. • Suitable for bait boards, sounder or GPS • Available in black or white

Light and strong, suited for dive flags or ensigns. • Easily removed for stowing • Fits into StarPort™ enabled rails or surfaces • Also mounts into common top-handle sailboat winches • 19mm diameter x 800mm • Available with black or white ends

BLA Code

Colour

BLA Code

Colour

195510 195514

Black White

195580 195584

Black White

Flag Whips

StarPorts

Light, mobile & flexible, ideal for kayaks, ATVs, anywhere where being seen is important. • Increase visual presence on the water • 1200mm long fibreglass whip with flag • Easily removed for transporting • Can be re-tasked to fly a dive flag • Available with a black or white base

The core component that accepts all Railblaza accessories. • Kit contains two StarPort’s™, spacers and hardware • Easy to surface, recess or rail mount • Durable, stylish design • Supplied with water-resistant gasket, bung and surface mount ring • Available in white or black

BLA Code

Colour

BLA Code

Colour

195586 195592

Black White

195610 195614

Black White

StarPort™ Rail Mounts

CupClam Drink Holders

A simple kit that allows you to re-task your railing. • Adaptable for 19 or 25 mm diameter rails • Securing screw prevents twisting (if required) • Available in white or black • With or without StarPort™

The compact Railblaza CupClam is an ingenious multi-function design combining practicality with functionality. This compact fold up cup, can and bottle holder with adjustable arms firmly secures to any StarPort™ mount. With its own built in rotating StarMount™ the CupClam allows you to install it on either horizontally or vertically oriented surfaces.

BLA Code

Description

195630 195631 195634 195635

Rail Rail Rail Rail

mount mount mount mount

Colour

only Black kit c/w StarPort™ Black only White kit c/w StarPort™ White

BLA Code

Description

195680 195684 195682 195686

CupClam CupClam CupClam CupClam

StarPort™ Rib Mounts Adds a whole new dimension to accessorising any inflatable boat by allowing the complete range of StarPort™ products to be utilised. • Non-intrusive mounting, no holes required • Non-leeching PVC allows high strength contact glues to be applied • Railblaza recommend Bostik® 999HR glue suitable for Hypalon or PVC • Recommended installation by inflatable professionals • Available in white with white StarPort™ or grey with black StarPort™ BLA Code

Colour

195638 White 195640 Grey

312

Quality marine equipment

c/w StarPort™ only c/w StarPort™ only

Colour Black Black White White

section

Hooks, Eyes and Web Eyes

Supplied in pairs to strap down boathooks, gaffs, spear guns, outdoor tools, to name a just afew long things. • Three size diameters available: 35, 50 and 75 mm • Stretchable retaining tether secures loads into place • Mountable on vertical or horizontal surfaces, and rails • Ideal for rods, boathooks, kayak paddles and ATV carriers • Available in black or white • Sold as a pair

Ideal for handling ropes or webbing plus a myriad of other uses around the boat, inside and out. • A breeze to transfer these accessories to other StarPort™ mounts • Each accessory can be fitted in three different orientations • Available in black or white • Sold as a pair

195566

BLA Diameter Code mm

Colour

195550 195554 195558 195562 195566 195570

Black White Black White Black White

35 35 50 50 75 75

195558

195520 195550

BLA Code

Description

Colour

195520 195524 195528 195532 195536 195540

Eye 25 Eye 25 Hook 25 Hook 25 Webeye 30 Webeye 30

Black White Black White Black White

195536 195528

Fillet Tables

Dive Bottle Holder Kits

A stable removable surface for cutting bait or cleaning the catch. • Kit comprises of board and 2 x platforms • Adjustable angle, mountable on sloping surfaces • Portable to other StarPort™ locations • Mounts fold up for easy storage

Kit comprises of two StarPort’s™, two web eyes 30, retaining strap and urethane foam pad for two bottles. • Foam pad is easily removed for transporting bottles • StarPort™ can be re-tasked for other accessories • Available in black or white • 195662 pad only also available

Two sizes: Small: 465 x 340 x 50 mm Large: 570 x 390 x 50 mm

195664

BLA Description Code 195600 195602 195604 195606

Incl Incl Incl Incl

mount mount mount & StarPort™ mount & StarPort™

Length Depth mm mm 465 570 465 570

340 390 340 390

BLA Code

Description

195664 195668

Complete kit black Complete kit white

195662

195662 Double foam pad

Rod Holder Kits

Adjustable Platform Kits

• Kit comprises of 1 x rod holder and 1 x StarPort™ • Fully adjustable 360° around and 90° vertical • Allows easy access to reel while in position • StarPort™ can be re-tasked for other accessories • Fits common sailboat winch handle receivers • Available in black or white • Rod holder available separately - refer below

Adjustable neck ensures a flat surface is maintained in any orientation. • Kit comprises of 1 x platform and 1 x StarPort™ • Suitable for bait boards, sounder or GPS • Available in black or white • Fits common sailboat winch handle receivers

BLA Code

Colour

195644 195648

Black White

195645 Black rod holder only 195649 White rod holder only

HULL, DECK & CABIN HARDWARE

G-Holds

BLA Code

Colour

195652 195656

Black White

www.bla.com.au

313

section

HULL, DECK & CABIN HARDWARE

Anode Specifications Without proper protection, your boat and motor can be ruined by galvanic corrosion, as a result of electrolysis. A boat may have many metals electrically connected in a saltwater solution (the sea). When two dissimilar metals are electrically connected and submerged in an electrolyte (sea water) a natural chemical reaction takes place. This chemical reaction forms a circuit where the least noble metal - the anode - will begin to break down leaving the most noble metal - the cathode - (e.g., the motor leg) intact. The lower leg of an outboard motor or sterndrive for example needs to be protected by anodes. The anode will be sacrificed leaving the lower leg protected. Anodes can also provide low cost cathodic protection on ocean going vessels, structures and equipment constructed of steel and other metals. Anodes are manufactured from high grade zinc (99.995%) and are alloyed to conform to US mil spec MIL-A-18001 K composition, (designation Z1) and subject to strict quality control.

Composition

MIL-A-18001K Zinc Alloy

Cadmium Copper Iron Indium Lead Mercury Silicon Nickel Manganese Magnesium Aluminium Zinc

0.025%-0.07% 0.005% Max. 0.005% Max. – 0.006% Max. – – – – – – Remainder

Diver and Mini Diver Anodes

Block Anodes

Multi fit, multi position anode that is suited to underwater replacement in any water clarity condition. Manufactured to conform to US mil spec MIL-A-18001 K composition.

Galvanised steel insert for mounting (190998-02). Manufactured to conform to US mil spec MIL-A-18001 K composition.

(A)

(B) d b

e c

a d b

e c

BLA Description Code

a b c mm mm mm

d mm

e Weight mm kg

190994 Diver anode 305 150 13 38-242 11 190996 Mini diver anode 150 100 13 22-104 11

3.6 1.04

BLA Code

a mm

b mm

c mm

d mm

(A) 190998 (A) 191000 (A) 191002 (B) 191004 (B) 191006

200 155 145 150 150

100 70 68 75 150

20 91-130 20 37-93 18 51-90 25 25

e Weight mm kg 13 13 15 21 21

Block Anodes - Plain

Block Anodes

Manufactured to conform to US mil spec MIL-A-18001 K composition. Plain block anode that can be drilled or machined to suit application.

Manufactured to conform to US mil spec MIL-A-18001 K composition. Galvanised steel strap insert for mounting.

- With Strap

314

2.05 0.8 1.0 2.0 3.9

BLA Code

a mm

b mm

c Weight mm kg

191010 191012 191014 191016 191018 191020

125 100 100 155 150 155

38 38 75 80 100 155

25 25 25 25 20 25

Quality marine equipment

0.9 0.8 1.5 2.0 2.2 4.0

BLA Code b a

a mm

b mm

c mm

d mm

Weight kg

191024 100 191026 155 191028 155

75 75 155

28 28 28

190 300 300

1.5 2.2 4.3

section

Oval Anodes

- With Strap

Manufactured to conform to US mil spec MIL-A-18001 K composition.

c f d

191040

b a

BLA Code

a mm

b mm

c mm

d mm

e mm

191032 191034 191036 191038

150 250 305 305

75 125 150 150

35 35 45 32

300 395 505 505

25 32 32 32

f Weight mm kg 3 4 4 4

BLA a b c Thickness Mount Weight Code Holes mm mm mm mm mm kg

3.1 7.0 13.0 8.5

191040 191041

219 230

108 80

127 98

25 18

6 6

Teardrop Anodes - Plain

Teardrop Anodes - With Fixing Holes

Manufactured to conform to US mil spec MIL-A-18001 K composition. Plain teardrop anode that can be drilled or machined to suit application.

Manufactured to conform to US mil spec MIL-A-18001 K composition.

BLA Code

a mm

b mm

c Weight mm kg

191042 85 191044 127 191046 175

37 60 72

25 30 38

BLA Code

0.3 1.0 1.65

a b c d e Weight mm mm mm mm mm kg

191048 90 191050 132

45 52

14 25

32 42

6 8

0.18 0.48

Teardrop Anodes - With Strap

Rudder Anodes - With Fixing Hole

Manufactured to conform to US mil spec MIL-A-18001 K composition.

c f

BLA Code

3.1 1.5

HULL, DECK & CABIN HARDWARE

191041

a mm

b mm

c mm

d mm

e mm

191060 127 191062 175 191064 206

60 80 75

34 40 40

300 300 300

25 25 25

f Weight mm kg 3 3 3

1.1 2.2 2.6

BLA Code

a mm

b mm

Weight kg per pair

191070 191072 191074 191076

46 71 94 125

5.0 6.5 8.4 8.4

0.09 0.6 1.0 1.5

www.bla.com.au

315

section

Condenser Anodes

Engine Pencil Anodes

Primarily designed for use on commercial fishing boat condensers but also suitable for use on hulls and rudders. Manufactured to conform to US mil spec MIL-A-18001 K composition.

Screw in anodes to suit popular diesel engines. Supplied with naval brass plug adaptor. Manufactured to conform to US mil spec MIL-A-18001 K composition.

- With Plug

c 5⁄16" UNF Stainless Steel Stud

BLA Code

a mm

b mm

c mm

d Weight mm kg

191082 191084

50 75

38 63

30 30

25 25

191135

Grouper Anode Ideal anode for electrolytic control over specific boat parts and conditions by attaching the alligator clips to the part requiring protection and placing the fish (anode) into the water. Do not connect anode to the batteries negative terminal, as this is not an earth terminal, it is a circuit terminal and the anode would be destroyed.

191128

0.4 0.85 191131

HULL, DECK & CABIN HARDWARE

BLA a Code mm

b Dia. mm

Weight

UNC

191128 191130 191134 191138 191142

6.2 9.5 12.0 15.8 19.0

.02 .04 .08 .13 .20

191129 191131 191135 191156 191143

63 44 69 51 51

Replacement Replacement Replacement Replacement Replacement

anode anode anode anode anode

for for for for for

¼" 1/8" NPT / " ¼" nPT / " 3/8" nPT 7/16" ½" bsp ½" ¾" bsp 5 16 3 8

191128 191130 191134 191138 191142

Engine Pencil Anodes Screw in anodes to suit popular diesel engines. Manufactured to conform to US mil spec MIL-A-18001 K composition. BLA Code 191096

Anode Length mm 205

Cable Weight Length m kg 4.5

2.7

Bertram® Type Hull Anode Use as a drop in replacement for genuine Bertram® hull anode or as a stud mount, general application hull anode. 304 grade stainless steel stud and nyloc nut. Manufactured to conform to US mil spec MIL-A-18001 K composition. a

191150

191156

191168

191170 b

3⁄8" UNC Stainless Steel Stud

BLA a b c d Stud Weight Code Length mm mm mm mm mm kg 191092 150

316

125

Quality marine equipment

4.0

BLA a Code mm

b Thread Engine Dia. Make mm

191150 191151 191152 191154 191156 191158 191160 191162 191164 191166 191168 191170

20.0 20.0 12.0 10.0 15.8 15.8 22.0 19.0 19.0 9.5 25.0 17.0

30 20 37 58 52 65 20 81 54 51 44 30

M8x1.25 M8x1.25 M5 ¼" UNC 7/16" UNC 3/8" UNC 5/8" UNF 5/8" UNC 5/8" UNC 3/8" UNC 3/8" UNC 3/8" UNC

Replaces OEM Part No.

Yanmar 27210-200300 Yanmar 27210-200200 Bukh Cat 6L2283 Cat Cat 6L2288 Cat 6L2016 GM GM GM Volvo 823661-4 Volvo 838929-8

section

Propeller Shaft Anodes

Manufactured to conform to US mil spec MIL-A-18001 K composition. Supplied with 304 grade stainless steel socket head cap screws and captured nuts. Sized to suit imperial prop shaft.

Manufactured to conform to US mil spec MIL-A-18001 K composition. Extra narrow anodes to suit limited clearance situations such as between shaft skeg/bearing and propeller boss. Stainless steel socket head cap screws and captured nuts as well as copper rivet pin secure without risk of falling off. Sized to suit imperial prop shaft.

- Thin Series

Copper rivet Combo bolt head

191174 Bolt retainer for easy handling

BLA Shaft Outer O/all Weight Mount Code Dia Dia. Length Screws in mm mm mm kg 191172 191174 191176 191178 191180 191181 191182 191184 191186 191188 191190 191192 191194

¾ / 1 11/8 1¼ 13/8 1½ 1¾ 2 2¼ 2½ 2¾ 3 7 8

19.0 22.2 25.4 28.5 31.7 34.9 38.1 44.4 50.8 57.1 63.5 69.8 76.2

54 54 54 54 62 64 70 83 83 108 108 121 121

54 54 54 59 66 66 66 69 73 96 96 92 92

0.58 0.50 0.45 0.48 0.54 0.68 0.74 1.06 0.91 2.74 2.39 3.42 2.95

2 2 2 2 2 2 2 4 4 4 4 4 4

Captured Nut Mil. Spec. Zinc

BLA Shaft Outer Code Dia. Dia. in mm mm 191195 191196 191197 191198 191199 191200 191201

¾ 19.0 1 25.4 11/8 28.5 1¼ 31.7 1½ 38.1 1¾ 44.4 2 50.8

Width Weight

54 64 64 64 76 89 89

25.4 32.0 32.0 32.0 32.0 35.0 35.0

.30 .55 .50 .45 .68 .90 .91

Propeller Nut Anodes Assembles

Suzuki® Type Anodes

Replace the standard prop nut with these specially made holder nut and anode assemblies, to control galvanic corrosion at the source. Replacement zinc anodes, held on with a socket head cap screw.

Drop in replacements for OEM anodes. Manufactured to conform to US mil spec MIL-A-18001 K composition.

191360

Holder nut Replacement anode

BLA Shaft Code Dia. in mm 191450 191452 191454 191458 191462 191466 191468 191470

¾ 7/8 1 1¼ 13/8 1½ 1¾ 2

Thread Weight UNC

½" 5/8" ¾" 7/8" 1" 11/8" 1¼" 1½"

.21 .34 .63 .96 1.14 1.36 2.0 2.39

19.0 22.2 25.4 31.7 34.9 38.1 44.4 50.8

Replacement anodes: BLA Shaft Dimensions Code in mm 191478 191480 191482 191484 191486 191488 191490 191492

¾ / 1 1¼ 13/8 1½ 1¾ 2 7 8

19.0 22.2 25.4 31.7 34.9 38.1 44.4 50.8

191362

BLA Weight Code kg 191360 191362

HULL, DECK & CABIN HARDWARE

Propeller Shaft Anodes

.34 .13

Replaces OEM Part No. 55125-87D00 55125-96310

Suzuki® Type Block Anode BLA Weight Code kg 191370

.08

Replaces OEM Part No. 55320-95310

Suzuki® Type Waffle Bar Anode

BLA Weight Code kg 191378

.51

Replaces OEM Part No. 55321-94900

www.bla.com.au

317

section

Mercury®/Mercruiser® Type Anodes

HULL, DECK & CABIN HARDWARE

Drop in replacements for OEM anodes. Manufactured to conform to US mil spec MIL-A-18001 K composition.

Skeg Anode

Round Plate Type

(A) (C) (B)

191218 .34

76214-5

Plate Anode (D)

BLA Code

Replaces OEM Part no.

34127 31640 46399

BLA Code

Replaces OEM Part no.

(D) 191216 (E) 191217

98432-5 822157

(E)

BLA Code

191224

34762A1

43396

Bar Anode BLA Code

55989

BLA Code

Replaces OEM Part No.

191228 818298 Wedge Block Anode

Block Anode

191225

Replaces OEM Part No.

191226

Replaces OEM Part No.

191222

BLA Code

BLA Plate Anode Replaces Waffle Code OEM Part No.

Nut Anode

BLA Code

Replaces OEM Part No.

191408

Replaces OEM Part No.

826134

Bearing Carrier Anodes

43994A2 & 821631

BLA Code

Lift Ram Anodes

Replaces OEM Part No.

(A)

(B)

(A) 191230 806105A1 (B) 191232 806188 BLA Code (A) 191234 (B) 191235

Replaces OEM Part No. 806189A1 806190

Plate Anode (A)

(B)

MerCruiser® Type Bravo III Add On Anode Kit Add on kit to suit 191237 Bravo III 2004 - present. Includes: • Propeller nut anode • Trim tab anode • Stainless steel fastenings

(A)

BLA Code

Replaces OEM Part No.

(A) 191238 (B) 191239

821629A1 821630A1

(B)

Verado Aluminium Anode Kit Complete Verado anode kit and replacement mount hardware to suit all 4 and 6 cylinder models. Suits brackish and saltwater environments. BLA Code

BLA Code

Description

S18-6156A 4 Cylinder S18-6157A 6 Cylinder

191240 Anode Kits

318

BLA Weight Replaces Code OEM kg Part No.

(A)

BLA Code

Description

Alpha 1 Anode Kit Bravo 1 Anode Kit Bravo 2 & 3 Anode Kit

Quality marine equipment

(B)

(C)

section

Evinrude速/Johnson速 and Cobra速 Type Anodes Drop in replacements for OEM anodes. Manufactured to conform to US mil spec MIL-A-18001 K composition.

BLA Hole Weight Code mm kg 191241 5 .08 191242 10-24 UNC .08

Waffle Block Anode

Replaces OEM Part No. 327606 123009

BLA Weight Code kg 191254

Block Anode

BLA Code

BLA Weight Code kg

Weight kg

Replaces OEM Part No.

.20

393023/436745/983315

191246

.38

.32

Replaces OEM Part No. 433458/398331

Curved Block Anode

Transom Bar Anode

BLA Weight Code kg

191243

Replaces OEM Part No.

.82 982277/982438

Outboard Cube Anode

191244

Replaces OEM Part No. 976669/367

BLA Weight Replaces Code OEM kg Part No. 191245 .27

431708

Medium Outboard Anode

Bar Anode

BLA Weight Replaces Code OEM kg Part No.

191248

191247 .77

.76

HULL, DECK & CABIN HARDWARE

Small Outboard Anodes

392123

433580

Horseshoe Anodes

Sterndrive Anode

191250

191249 191252

BLA Weight Code kg 191256

.91

Replaces OEM Part No. 984547

BLA Weight Code kg Part No. 191249 191250 191252

Replaces OEM

.82 983494 .94 984513/3853818 .94 89420

www.bla.com.au

319

section

Volvo® Type Anodes

HULL, DECK & CABIN HARDWARE

Drop in replacements for OEM anodes. Manufactured to conform to US mil spec MIL-A-18001 K composition.

Pencil Anodes

Drive Leg Anodes

(A)

(B) (B)

(A)

BLA Weight Code kg

Replaces OEM Part No.

(A) 191168 (B) 191170

823661-4 838929-8

.14 .04

Bar Anodes

(D)

(C)

(A)

(B) (E)

(F)

BLA Drive Weight Code Type kg (A) 191272 (B) 191274

200-280 290

.91 .79

Replaces OEM Part No. 832598 852835

Gimbal Plate Anode

BLA Weight Code kg 191280 1.05

Replaces OEM Part No. 3854130

BLA Drive Weight Code Type kg

Replaces OEM Part No.

875815 851983 875821-1 875809 875806-4 875812

270T-280 120S & SB Prop 290 200 250-270 Saildrive

Triangle Anode

Transom Plate

BLA Weight Code kg

Replaces OEM Part No.

BLA Weight Code kg

191284

3855411

191290

1.02

.11

Replaces OEM Part No. 872793

Yanmar® Type Anodes

(C )

Manufactured to conform to US mil spec MIL-A-18001 K composition.

(A)

320

.69 .55 .61 .20 .30 .92

Quality marine equipment

.07 .04 .52

Replaces OEM Part No.

Thread

27210-200300 M8 27210-200200 M8

(B )

section

Honda速 Type Anodes Drop in replacements for OEM anodes. Manufactured to conform to US mil spec MIL-A-18001 K composition.

HULL, DECK & CABIN HARDWARE

Skeg Anodes

Waffle Bar Anode (B)

(A)

(B) BLA Weight Code kg (A) 191212 (B) 191380

.45 .27

Replaces OEM Part No.

BLA Weight Code kg

41107-ZW1-003ZA 41107-ZV5-000

(A) 191400 .36 (B) 191402 .83

06411-ZV5-000 06411-ZW1-003

Block Anode

Wedge Anode

BLA Weight Code kg 191408

Replaces OEM Part No.

.25

Replaces OEM Part No.

BLA Weight Code kg 191346

41109-ZW1-003

.10

Replaces OEM Part No. 41106-935-812

Yamaha速 Type Anodes Drop in replacements for OEM anodes. Manufactured to conform to US mil spec MIL-A-18001 K composition. Skeg Anodes

Cav Plate Anode

(C)

(A)

BLA Weight Replaces Code OEM kg Part No. 191320 .45 61N-45251-01 (D) Handle Bar Anode (B)

(E)

.48 .47 .42 .50 .48 .27

Replaces OEM Part No. 688-45371-02-00 6E5-45371-01-00 6K1-45371-00-00 6J9-45371-01-00 61A-45371-00 664-45371-01

Block Anodes

BLA Weight Replaces Code OEM kg Part No. 191338 .91 6G5-45251-01-00 Waffle Bar Anode

(F)

BLA Weight Code kg 191340

(A)

Replaces OEM Part No.

.47 6H1-45251-02-00

Button Anode BLA Weight Code kg (A) 191346 .10 (B) 191348 .14

Replaces OEM Part No. 6E0-45251-11 6E5-45251-00

(B)

BLA Weight Code kg 191350

.03

Replaces OEM Part No. 688-45251-01-00

www.bla.com.au

321

section

HULL, DECK & CABIN HARDWARE

Bow Roller - Chrome Brass

Bow Rollers With Pin - Chrome Brass

Heavy duty cast brass construction. Triangular base with raised side plates for extra anchoring security in rough conditions. No retaining pin.

Heavy duty cast brass construction with marine grade chrome plating. Spring loaded quick release pin to retain anchor warp.

BLA Code 192052

O/all Width Height Length mm mm mm 140

Roller Mount Width Screws mm mm

6 c/s

Bow Rollers - Stainless Steel

192060

One piece pressed, heavy gauge, 316 grade stainless steel housing. Black delrin roller. Spring loaded, quick release captive pin to retain anchor and warp.

BLA Code 192060 192064

192064

O/all Width Height Length mm mm mm 135 250

70 105

60 80

Roller Mount Width Screws mm mm 25 39

6 c/s 6 c/s

Hinged Bow Rollers - Stainless Steel

192086

BLA Code 192086 192088

Formed from heavy gauge 316 grade stainless steel. Double roller and hinged nose section designed to securely store, as well as automatically deploy the anchor. Spring loaded, quick release captive pin to retain anchor and warp.

192088

O/all Length mm 197 225

Mount Height Base mm mm 97x57 125x57

73 73

Roller Mount Width Screws mm mm 48 48

6 c/s 6 c/s

192096

Captured Anchor Rollers Heavy duty pressed 316 stainless steel construction, electro polished finish. Non-corrosive large diameter black delrin roller. Saddle strap to retain anchor and warp.

192094

BLA Code BLA Code 192100 192102 192104 192106

O/all Width Height Length mm mm mm 390 458 505 589

85 130 100 135

50 80 70 50

Roller Mount Width Screws mm mm 45 77 60 86

10 10 10 10

r/h r/h r/h r/h

192094 192096

O/all Mount Height Length Base mm mm mm 327 355

96x57 125x57

110 110

Roller Mount Width Screws mm mm 48 48

6 c/s 6 c/s

Split Bollards - Cast Stainless Steel Heavy duty cast 316 grade stainless steel construction. Passivated and highly polished. The slotted centre shaft simply and effectively secures the anchor chain. For additional security both sizes are available with a quick release pin. Suitable for regular or long link chain.

Raked Cross Bollards - Chrome Brass Modern raked styling with teardrop shaped base plate. Chrome plated solid cast brass. 192124 features an integral through deck mount stud with an additional fastening required to prevent bollard from rotating.

192114

192122

BLA Height Base Code mm mm 192122 192124

322

69 114

Mount Stud mm

49x84 n/a 68x104 13x60

Quality marine equipment

Mount Screws mm 6 c/s 6 c/s

192124

192118

BLA Code

Chain Captive Height Base Size Pin mm mm mm

192114 192116 192118

8-10 8-10 10-13

no yes yes

84 84 116

62x62 62x62 86x86足足足

Mount Screws mm 6 c/s 6 c/s 6 c/s

section

Cross Bollards - Chrome Brass

Cross Bollards - Cast Alloy

Traditionally styled from chrome plated solid cast brass.

Inexpensive non polished die cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.

192132 192134 192136 192138 192140

Shaft Height Base Dia. mm mm mm 20 25 25 30 35

Mount Screws mm

BLA Code

88 59x66 6 c/s 102 65x65 6 c/s 123 100x100 6 c/s 130 115x80 10 r/h 154 135x84 10 r/h

192144 192145

Shaft

Height

Base Dia. mm

20 20

83 103

55x58 74x88

Horn Bollard - Cast Stainless Steel

Oval Cleats

Heavy duty mooring bollard with solid base. High polished 316 grade cast stainless steel construction.

Manufactured from 316 grade stainless steel, with a mirror polish finish. European styling with concealed threaded mount holes for no visible screw heads to detract from vessels aesthetics.

BLA Length Width Height Code mm mm mm 192146

300

- Stainless Steel

BLA Length Height Width Code mm mm mm

Mount Screws mm

192164 192166 192168

6 c/s

204 265 310

56 70 80

Mount Bolts Mount Centre/Centre Bolts mm mm

35 40 50

74 82 83

M10 M12 M16

Oval Hawse Hole - Stainless Steel

Highly polished investment cast 316 grade stainless steel. Internal mount studs for no visible fastenings. Presents a contemporary clean appearance. Solid construction to handle anchor well use, or through deck/bulwark installation to lead mooring lines.

Stainless steel chain pipe with lid. Lid is permanently attached with security chain. Stainless steel hook in lid fits into the anchor chain to hold lid down.

BLA Outside Throat Intrusion Protrusion Mount Code Dia. Studs mm mm mm mm mm 192148 138x63 90x35 192149 145x97 100x50

20 25

6 7

6 6

BLA Length Width Height Throat Mount Dim Screws Code mm mm mm mm mm 192160

160

115

Triangular Hawse Hole - Stainless Steel

Drop Down Cleats

Heavy walled investment cast 316 grade stainless steel. Designed for corner mounting rope lead application.

Highly polished investment cast 316 grade stainless steel. Stows flat for flush styling and to prevent catching. Anti rattle, holds firm in up or down position. Simple and fast two hole installation.

BLA Length Width Intrusion Flange Code mm mm mm mm 192158

206

124

Mount Screws mm 5 c/s

HULL, DECK & CABIN HARDWARE

BLA Code

105x52 6 c/s

- Stainless Steel

BLA LOA Width Intrusion Protrusion Mount Code Stowed Holes mm mm mm mm mm 192169 192172 192174

110 152 207

32 39 43

50 65 78

10 12 14

19 22 25

www.bla.com.au

323

section

HULL, DECK & CABIN HARDWARE

Pop-out Cleats

Arched Horn Cleat

- Cast Stainless Steel

Cast 316 stainless steel construction. Patented innovative pop-out design. This cleat is raised and lowered by simply pushing down on the spring loaded cleat. Installation simply requires the drilling of four holes. Drain barbs are already cast in and moulded plastic drain manifolds are available separately. Aluminium backing plate and nyloc nuts included.

Minimalist sleek styling with concealed fastenings. Highly polished investment cast 316 stainless steel.

BLA Code 192200

BLA LOA Width Intrusion Code mm mm mm

Protrusion Stowed mm

192170 140 32 81 192171 165 38 93 192173 200 50 110 192176 Drain manifold suits 192171

16 18 22

Width mm

192192 192194

135 175

52 60

192201 192203 192202 192204 192206 192208

30 38

6 8

192196 Drainage receptacle for 192192 192198 Drainage receptacle for 192194

Foldaway Cleats - Cast Stainless Steel Cast 316 stainless steel construction, flush mount, pull up - push down, horn cleats. Adjustable movement friction, ensures that cleats remain firmly in the up or down position. Supplied with mounting studs, nuts, washers and backing plate to suit 12mm to 50mm thick decks. Optional drainage receptacle to suit 10mm hose, is available for both models.

192260 192262

155 202

192262 opened

54 72

X-Folding Cleats

Mount Studs

150

- Cast Stainless Steel

100 120 155 200 250 300

38 40 43 52 70 70

Mount Screws mm

27 24 31 39 47 56

5 5 5 6 8 8

c/s c/s c/s c/s c/s c/s

Mooring Cleats - Cast Stainless Steel

70 70

BLA Length Width Code mm mm

Height mm

BLA Length Width Height Code mm mm mm

Intrusion Protrusion Studs mm mm mm

192262 closed

Width mm

Highly polished cast stainless steel. Open base. Smooth, slimline, rounded design.

Cast 316 stainless steel construction, flush mount, pull up - push down, horn cleats. Adjustable movement friction, ensures that cleats remain firmly in the up or down position. Supplied with mounting studs, nuts, washers and backing plate to suit 12mm to 50mm thick decks. Optional drainage receptacle to suit 10mm hose, is available for both models. LOA mm

Length mm

Slimline Horn Cleats

Flush Horn Cleats - Cast Stainless Steel

BLA Code

- Cast Stainless Steel

Heavy duty cast 316 grade stainless steel construction. Large open base for ease of line handling. BLA Length Width Height Code mm mm mm

Mount Screws mm

192209 192211 192210 192212 192214

5 5 5 8 8

100 120 150 200 250

35 45 52 67 82

22 27 30 38 44

c/s c/s c/s c/s c/s

Horn Cleats - Cast Stainless Steel Heavy duty cast 316 grade stainless steel construction. Open base design. 3/8" UNC threaded mount studs.

Height Closed mm

Height Open mm

Mount Holes

BLA Length Width Height Code mm mm mm

13.5 15

47 62

8 c/s 10 c/s

192218 192220

240 300

30 31

45 61

Mount Screws mm 70 70

- Cast Stainless Steel

Heavy duty cast 316 grade stainless steel low profile folding cleats. Designed to be folded when not in use to prevent accidental catching of lines. Simple lift action to raise to open to create a strong tie off point. BLA Length Width Code mm mm 192266 192268

324

155 202

54 72

Quality marine equipment

Height Closed mm

Height Open mm

Mount Studs mm

22 29

40 54

50 55

192266 closed

192266 opened

section

Horn Cleats - Cast Alloy

Horn Cleat

Hand polished cast alloy construction. Radiused corners to minimise chafing of mooring and anchor ropes. Solid base.

Manufactured from cast stainless steel. Fitted with a black plastic base offering a professional look for all craft.

192223 192225

150 200

28 31

35 40

Mount Screws mm

BLA Length Width Height Code mm mm mm

6 c/s 6 c/s

192190

153

Mount Screws mm

6 c/s

Horn Cleats - Cast Aluminium

Mooring Cleats - Cast Alloy

Plain finish cast aluminium horn cleats. Through bolted.

Hand polished cast alloy construction. Radiused corners to minimise chafing of mooring and anchor ropes. Open base.

BLA Length Width Height Code mm mm mm 192242 192243 192244

150 200 245

23 27 29

35 47 56

Mount Screws mm 6 c/s 6 c/s 8 c/s

Fairleads - 316 Stainless Steel

20 25

6 c/s 6 c/s 8 c/s 10 c/s

192180 192182 192184 192186 192188

5 c/s 5 c/s

Gunwale Caps - Stainless Steel

203 250 302 350

63 70 86 102

(A)

41 51 41 51

78 100 130 167 205

12 15 18 21 25

34 43 34 43

19 21 27 32 36

3 4 5 5 6

c/s c/s c/s c/s c/s

316 Stainless steel for durability. An economical basic cleat for tying off lanyards, flag halyards, etc.

BLA Length Width Height Code mm mm mm

33 35 31 35

192250 192251

68 114

11 14

Gunwale Caps

Folding pad eyes with friction hinged, non-rattle, tie off eyes. Low profile, non obtrusive design with heavy duty cast stainless steel base.

Chrome plated cast brass caps to finish gunwale rubber.

192276

Height Height Mount BLA Description Length Width Closed Open Holes Code mm mm mm mm 48 48

4 r/h 5 r/h

- Chrome Brass

(A)

(B)

BLA Length Width Width Height Mount Code External Internal Screws mm mm mm mm mm

192278

9 9

Mount Screws mm

12 21

Folding Pad Eyes

60 60

Mount Screws mm

(B)

BLA Length Width Width Height Code External Internal mm mm mm mm

192276 Single eye 70 192278 Double eye 100

46 53 59 77

Bull Horn Cleats - Stainless Steel

Stainless steel gunwale caps to suit gunwale rubber. 4mm counter sunk mount holes.

(A) 192283 96 (A) 192285 96 (B) 192289 96x96 (B) 192291 90x90

192233 192235 192237 192239

BLA Length Width Height Code mm mm mm

BLA Length Width Screw Code Size mm mm mm 120 155

Mount Screws mm

Horn Cleats - Nylon

Solid investment cast stainless steel fairleads, polished to a near chrome finish. Sold as a pair, one port and one starboard.

192257 192258

BLA Length Width Height Code mm mm mm

HULL, DECK & CABIN HARDWARE

BLA Length Width Height Code mm mm mm

- Open

6 c/s 6 c/s

(A) 192280 64 (A) 192282 96 (A) 192284 96 (B) 192286 70x70 (B) 192288 96x96 (B) 192290 90x90

35 41 51 35 41 46

29 34 43 29 34 38

24 33 35 24 31 35

4 4 4 4 4 4

c/s c/s c/s c/s c/s c/s

www.bla.com.au

325

section

HULL, DECK & CABIN HARDWARE

Raised Cap Deck Fillers - Chrome Brass

Pop Up Deck Fillers - Stainless Steel

High quality chrome plated brass. Complete with security chain to stop cap falling overboard. Raised lip to prevent contaminants entering, particularly important if refuelling in wet weather.

Flush mount, 316 grade cast stainless steel deck fillers. unique pop top cap. Depress and rotate inner cap to unlock the pop up knurled grip for opening. Also incorporates recess to accept deck filler key. Features coarse thread, 'O' ring seal, retaining wire as well as CE icon style identification. 192311 and 192315 waste fittings accept camlock pump out adaptors, refer page 209.

BLA Hose Protrusion Intrusion Code Size mm in mm mm 192302 192304

38 1½ 50 2

18 18

50 50

Base Dia. mm

Mount Screws mm

70 76

4 c/s 4 c/s

192318

192308

Deck Fillers - Nylon Black nylon deck filler. Finger grip cap with 'O' ring creates an umbrella cover over base to prevent contaminant entering. Security chain to prevent cap falling overboard. Caps marked 'Fuel' or 'Water'.

BLA Type Hose Angle Flange Protrusion Intrusion Mount Code Size Screws in mm mm mm mm mm 192308 192309 192310 192311 192312 192313 192314 192315 192317 192318 192320

BLA Cap Hose Protrusion Intrusion Cap Mount Code ID Size Dia. Screws mm in mm mm mm mm 192322 192324 192326 192328

Fuel Water Fuel Water

38 1½ 38 1½ 50 2 50 2

18 18 19 19

67 67 67 67

90 90 90 90

5 5 5 5

c/s c/s c/s c/s

Diesel 11/2 38 Water 11/2 38 Fuel 11/2 38 Waste 11/2 38 Diesel 2 50 Water 2 50 Fuel 2 50 Waste 2 50 Water 11/2 38 Fuel 11/2 38 Fuel 2 50

90º 90º 90º 90º 90º 90º 90º 90º 30º 30º 30º

75 75 75 75 84 84 84 84 75 75 84

6 6 6 6 7 7 7 7 6 6 7

75 75 75 75 75 75 75 75 90 90 102

5 c/s 5 c/s 5 c/s 5 c/s 5 c/s 5 c/s 5 c/s 5 c/s 5 c/s 5 c/s 5 c/s

Deck Fillers - Stainless Steel Flush mounted, investment cast, 316 stainless steel deck fillers. Features coarse thread for less chance of cross threading, rubber 'O' ring seal, cap retaining wire and finger key for ease of opening. Colour coded international symbol identification to meet CE requirements. 192335 waste fitting accepts Camlock pump out adaptor, refer page 209. 76mm diameter flange.

Deck Filler Chrome plated zinc alloy base fitted with black plastic mount flange with raised lip and cap with securing strap. Cap flange has “gas” identification.

BLA Type Hose Protrusion Intrusion Mount Code Size Screws in mm mm mm mm

BLA Code 192359

326

Hose Protrusion Intrusion Size mm mm mm 38

Quality marine equipment

Mount Screws mm 5 c/s

192330 192332 192334 192335 192336 192338 192340

Diesel Water Fuel Waste Diesel Water Fuel

11/2 11/2 11/2 11/2 2 2 2

38 38 38 38 50 50 50

9 9 9 9 9 9 9

76 76 76 76 76 76 76

5 5 5 5 5 5 5

c/s c/s c/s c/s c/s c/s c/s

section

Deck Fillers - Stainless Steel

Hinged cap with positive push latch for ease of opening or closing, eliminates the need for special keys and prevents cap being lost overboard. White, U.V. stabilised polypropylene cap with ‘gas’ identification . Separate stainless steel 40º angled base features breather hose with integral baffle to prevent splash back. Cap can be mounted at 90º intervals to base.

Flush mount, lost wax cast, 316 grade stainless steel deck fillers. Unique flip-up key ensures ease of removal at all times. Features coarse thread, 'O' ring seal, retaining chain and filler type identification moulded into the lid.

BLA Code 192344

Vent Fuel Hose Hose mm mm 16

BLA Type Code

Cap Protrusion Intrusion Mount Size Screws mm mm mm 102x82

5 c/s

192345 Replacement cap assembly.

Vented Deck Filler

- Stalon

Designed primarily for aluminium boats where the gunwale extrusion and cockpit extrusion protrude above the deck, creating a water drain path where fuel deck fillers are required to be installed. The raised neck sits 22mm above deck level, well above water run. Nylon body in contact with aluminium deck to prevent electrolysis, stainless steel cover cap for an all stainless steel appearance. Fuel and breather hose can be fitted prior to installation of filler to deck. Features include spring wire retainer to cap, breather connection and international symbol identification. Cap diameter 80mm.

192350 192351 192352 192353 192354 192355 192356

Diesel Water Fuel Waste Diesel Water Fuel

Hose Flange Protrusion Intrusion Mount Size Screws mm mm mm mm mm 38 38 38 38 50 50 50

75 75 75 75 81 81 81

6 6 6 6 4 4 4

Vented Deck Fillers

- Nylon

75 75 75 75 95 95 95

4 4 4 4 4 4 4

c/s c/s c/s c/s c/s c/s c/s

Nylon twist cap with black plastic body. Integral tank vent incorporates flame arrestor and anti-surge valve. Deck filler key included. Cap has moulded in “gas” identification . Available in 90º or 35º fill neck configuration. 85mm diameter flange.

Spacer

BLA Colour Angle Fuel Vent Protrusion Intrusion Code Hose Hose mm mm mm mm BLA Code 192366

Fuel Hose mm 38

Breather Protrusion Intrusion Mount Hose Screws mm mm mm mm 16

Vented Deck Fillers

105

4 c/s

401960 Black 90º 38 401962 White 90º 38 192368 Chrome 90º 38 401966 Black 35º 38 401968 White 35º 38 401969 Black spacer to raise filler

16 16 16 16 16 10mm.

13 13 8 11 11

HULL, DECK & CABIN HARDWARE

Vented Angled Deck Filler

76 76 76 85 85

Vented Deck Fillers

- Plastic

Quality Perko chrome plated bronze cap filler with embossed fuel or water symbol. Features clearly marked flange under cap to guard against incorrect fills.

Flip top cap that cannot be lost overboard. Integral tank vent with flame arrestor. U.V. stabilised injection moulded plastic with ‘gas’ identification. 110 x 73mm base.

Features: • Integral tank vent with anti surge valve (water) • Integral tank vent with flame arrestor and anti surge valve (fuel) • Stainless bead cap retaining chain • Large 88mm easy grip cap • 38mm filler hose diameter • 16mm vent hose diameter 192388

BLA Colour Fuel Vent Protrusion Intrusion Mount Code Hose Hose Screws mm mm mm mm mm

BLA Code

401958 Black 401959 White

192388 Fuel 192394 Water

38 38

16 16

20 20

65 65

4 c/s 4 c/s

Description Angle 90˚ 35˚

192394

www.bla.com.au

327

section

HULL, DECK & CABIN HARDWARE

Drain Plug -

Drain Plug - Chrome Brass

Cast Alloy

Heavy duty cast alloy construction. Three point thread. Supplied with 'O' ring seal. Ideal for welding on to alloy boats. Thread requires lubrication after installation.

BLA Code 192402

Chrome plated brass base. Black nylon bung features a retainer to prevent accidental loss. Coarse four point thread to cope with sand and sediments.

Base Dia. mm

Bung Dia. mm

Cut Out Dia. mm

Base Intrusion mm

192404 Replacement bung & 'O' ring

Moulded black plastic base and bung. Coarse four point thread. Bung retainer to prevent loss.

Base Size mm

192412 52x35

Bung Dia. mm

Cut Out Base Dia. Intrusion mm mm

Large Diameter Drain Plug

Bung Dia. mm

Cut Out Dia. mm

192406

51x35

Base Mount Intrusion Screws mm mm 9

Mount Screws mm 5 c/s

BLA Code 192415

- Chrome Brass

Cut Out Base Dia. Intrusion mm mm

Large Diameter Drain Plugs - Plastic Moulded plastic construction, designed for quick efficient drainage. 'O' ring seal. Coarse four point thread to cope with sand and sediment.

Mount Screws mm

192440 68x49 31 38 192444 Replacement bung and washer

Large Diameter Drain Plugs

- Plastic

4 c/s

Black, plastic drain plug. Flat flange base for mounting as low as possible on the hull. 'O' ring seal, course four point thread to cope with sand and sediments.

BLA Colour Code

Base Size mm

Bung Dia. mm

Cut Base Mount Out Intrusion Screws mm mm mm

192422 White 69x49 31 38 192442 Black 69x49 31 38 192430 White replacement bung for 192422 192444 Black replacement bung for 192442

Rubber Bungs Tapered rubber bungs for use in dinghies. Sold in packs of 25.

192450

BLA Code

Base Size mm

192450 65x50 192456 66x58 192454 Replacement 192444 Replacement

328

Bung Dia. mm

5 c/s

Fine Thread Bung - Plastic

Chrome brass body with a black nylon bung featuring a retainer to prevent loss, rubber seal, large grip for ease of opening and coarse four point thread to cope with sand and sediments.

Base Size mm

Bung Dia. mm

Plastic bung and washer, replaces fine three point, 18mm threaded bungs.

192414 Replacement bung and washer

BLA Code

Base Size mm

192408 Replacement bung and washer

Drain Plug - Plastic

BLA Code

192456

Cut Out Mount Dia. Screws mm mm

30 40 31 40 bung for 192450 bung for 192456

Quality marine equipment

4 r/h 4 r/h

BLA Size Code No.

Small Dia. mm

Large Length Dia. mm mm

192462 192463 192464 192466 192468 192470 192472

11.0 13.0 13.2 15.3 16.0 17.5 18.6

14.5 15.6 16.1 18.2 19.3 21.6 22.7

3 4 5 6 7 8 9

22.0 24.1 25.0 25.0 26.0 32.5 35.5

9 9

4 r/h 4 r/h

section

Telescoping Scupper - ABS Plastic

30% glass filled nylon 66 body with stamped 316 grade stainless steel face. Combines the look of stainless steel with the cost and weight saving of nylon. Ideal for alloy boats as there is no contact between the stainless steel face and alloy hull. One way check valve is manufactured from PVC for years of trouble free operation.

Through transom mount scupper moulded in marine grade, high impact, U.V. screened ABS plastic. 5Âş angle for enhanced drainage. Tapered lip for efficient sealing. Adjustable for different transom thicknesses from 50-100mm. Large outlet for maximum flow.

BLA Code 192476

Hose Max Hull O/All Face Mount Size Thickness Length Dia. Hole mm mm mm mm mm 38

133

BLA Length Height Depth Cut Out Code l x h mm mm mm mm 192486

N.B. Not intended for permanent immersion

182

Mount Screws mm

160x58

4 c/s

N.B. Not intended for permanent immersion

Scuppers

- Cast Aluminium

Hinged Scupper

Cast alloy, plain finish scuppers that allow high volume of water transfer for self draining decks, cockpits, etc. Surface mount. Screw on or weld onto alloy boats. Retrieval attachment point fitted. Stainless steel tension spring mechanism locks in open as well as closed position.

Flush mount scupper manufactured from a combination of white acetyl and delrin for long life. Simply attach over existing hole or through hull fitting. Gravity closing hinged lid.

BLA Code 192482

BLA Code 192488 192490

Outside Dia. mm

Inside Depth Mount Dia Screws mm mm mm

4 c/s

N.B. Not intended for permanent immersion

Outer Inner Dimensions Dimensions mm mm 170x115 235x145

- White Acetyl

Scuppers - Thru-hull

110x60 175x86

Thru Transom Scupper

Black or white plastic moulded through hull scuppers with hose attachment. Ideal for bilge pump out or cockpit drainage. Soft rubber flap valve to keep out seawater.

Designed for installation with self-draining cockpits or for bilge pump out. The rubber flapper opens to dump water out and closes to prevent backwash. Tough acetyl construction.â&#x20AC;&#x2C6; White in colour.

BLA Colour Hose Max Hull O/All Flange Mount Code Size Thickness Length Dia. Hole mm mm mm mm mm

N.B. Not intended for permanent immersion

BLA Code 138812

Hose Max Hull O/all Flange Size Thickness Length Dia. mm mm mm mm 38

152

Mount Hole mm 46

N.B. Not intended for permanent immersion

Scupper Valve One way water exit for boats with self draining cockpits. Scupper mounts over flush drains above the waterline. The rubber flapper opens to dump water out and closes with water pressure to prevent backwash. Durable acetal mount flange.

BLA Diameter Code mm 138814

Max. Mount Bore Screws mm mm 38

3 c/s

N.B. Not intended for permanent immersion

192479 White 192480 Black 192481 White

38 38 38

75 25 25

134 90 90

74 74 74

HULL, DECK & CABIN HARDWARE

Scupper - Stalon

50 50 50

N.B. Not intended for permanent immersion

Sea Scuppers Manufactured from U.V. stabilised clear polycarbonate. Suitable for new or existing self draining cockpits/floors. PVC mounting seal and solid polypropylene sealing ball. Must be installed on a near vertical flat face.

BLA Code 192496 192498

Outside O/all Hole Mount Dia. Length Cut Out Screws mm mm mm mm 72 113

48 74

24 44

4 r/h 5 c/s

N.B. Not intended for permanent immersion

www.bla.com.au

329

section

HULL, DECK & CABIN HARDWARE

Slop Stoppers - Rubber

Rigging Flanges and Hose

Splashproof black rubber boot. Prevents chafing of cables through motor well. Also available as round or oval trim ring only.

All the components required to complete a professional rigging system. Protects outboard engine cables and wiring from dirt, abrasion, sun, salt and water. The hose is durable, flexible and kink resistant. The mount flanges and split union are moulded from U.V. stabilised polypropylene. Two types of mount flange are available, (C)

(A)

(B)

(D) BLA Code

Outside Cut Out Intrusion Max. Dim. Panel Thickness mm mm mm mm

Slop Stopper

63 dia. 63 dia. 115x60 115x60

n/a 46 n/a 46

192516 and 7 are internally threaded to retain the hose and make rigging adjustment simple. These flanges can be surface or recess mounted. 192518 and 9 have an additional port to allow the fuel line to pass through so as the primer bulb can be accessed immediately adjacent to the outboard. 192521 and 2 are split unions that provide an entry point for the fuel line back into the rigging hose. 192520 is a moulded black vinyl cap to provide closure of the engine end of the rigging hose if required.

6 6 5 5

- PVC

Moulded from flexible black PVC. Provides a neat means of passing wires, cables and plumbing through bulkheads, splashwells, etc.

(A)

(D)

(E) BLA Code

Cut Out Outside Protrusion Intrusion Mount Dia. Dia. Screws mm mm mm mm

192506

3 r/h

Motor Well Boot - Rubber Provides organised, covered pass through motor well for control cables, wires or fuel lines. Black PVC boot with black polypropylene mount flange.

BLA Code 192508

105

Description

Colour

(C) 192516 Rigging mount flange Black 192517 Rigging mount flange White (D) 192518 Rigging mount flange with fuel port Black 192519 Rigging mount flange with fuel port White (E) 192521 Rigging hose union Black 192522 Rigging hose union White (A) 192520 Vinyl cap Black (B) 192524 Rigging hose 50mm x 15m Black 192525 Rigging hose 50mm x 15m White 192526 Rigging hose 50mm x 7.5m Black 192527 Rigging hose 50mm x 7.5m White

Rigging Flange

Cut Out Outside Protrusion Mount Dia. Dia. Screws mm mm mm mm 65

BLA Code

- Plastic

Manufactured from U.V. stabilised injection moulded plastic. 45º exit hole allows for smooth routing of electrical or steering cables from port or starboard side of transom. Threaded flexible hose screws neatly and securely into flange without locking nuts. Hose and flange sold separately.

3 c/s

Cable Boots - Vinyl The cable boot provides a neat open area to pass wiring and cables through a motor well. When rigging is complete, simply pull the cable tie (supplied) snug around wires and cables to complete the installation. The cable boot is constructed of PVC that resists U.V. rays, petrol and oil. Black polypropylene mount flange. BLA Colour Cut Out Code Dia. mm

Outside Intrusion Dia. mm mm

192510 Black 82 192512 Off white 82

330

Quality marine equipment

120 120

68 68

Mount Screws mm 3 c/s 3 c/s

BLA Description Code

Outside Dim. mm

Cut Out mm

192530 Rigging flange 160x125 122x83 192532 20m x 63mm I.D. hose

Mount Screws mm 5 r/h

section

Bait Caster Rod Holder - Black Nylon

Designed for use with baitcaster and spinning reels. Large, easy-grip cam lock provides 160º vertical adjustment for a variety of rod tip height settings. Heavy duty, deep tooth gear lock securely holds rod holder in mounting bases. Locking collar secures rod during travel and use. Includes bi-axis mount that can be used a side or pedestal mount, allowing 360 degree of horizontal adjustment.

This rod holder can easily adjust a rod from 5º - 95°. The base design has twelve variable positions to allow the rod to rotate through 360°. Thumb activated, slide locking ring retains the rod when trolling. Supplied with a side mount bracket with channel to allow mounting on rails up to 25mm diameter with optional rail mount adaptor. Various additional mounts can be ordered separately and are listed below. Rod holder and mount kits are all moulded in tough polyethylene.

BLA Code

Overall Length mm

Base Size mm

Hole Centres mm

Mount Screws mm

192550 215 98x49 78x32 192551 Includes bi-axis mount

6 r/h

BLA Tube I.D. Code mm 192555

O/all Length mm

Base Size mm

270

82x56

Hole Mount Centres Screws mm mm 62x40

6 r/h

Mount Kits - Black Polyethylene

Bi-Axis Mount The newly designed mount can be used a side or pedestal mount, allowing 360 degree of horizontal adjustment. Compatible with all Attwood and other leading brand rod holder mounting patterns.

Side Mount Mounts on vertical surface. Moulded channel in base for mounting on tubular rails to 25mm diameter using rail mount adaptor below.

BLA Code

Base Protrusion Hole Mount Size Centres Screws mm mm mm mm

192551

192556 82x56

62x40

6 r/h

Rail Mount Adaptor

Rail Mount Complete with all necessary hardware to mount all Attwood and other leading brand rod holder mounts to square or round rails between 22mm (7/8") and 32mm 1¼"

TBC pic

Converts side mount to rail mount. Fastenings purchased separately. BLA Code

Base Size mm

Hole Centres mm

192557

82x56

62x40

HULL, DECK & CABIN HARDWARE

Pro Series Rod Holder

Flush Deck Mount Mounts on horizontal surface. BLA Code

BLA Code

192552

192558 82x56

Rail Mount Rod Holders - Slotted

Rail Mount Rod Holders

Solid 316 mirror polished stainless steel clamp and body with soft black PVC liner to protect rod and reel. The slotted barrel and multi position articulation is designed for setting rods with overhead reels to the optimum fishing position. Also commonly used in multiples for rod storage racks for overhead and spinning reels.

Solid 316 stainless steel construction available in mirror finish or gold titanium treated finish. Soft black PVC liner and neck flange to protect rods and reels. Multi position articulation to set rods in desired fishing position. Also used in a multiple bank for rod storage. 5mm pin in base to align rods.

BLA Length Code mm 192600

245

Tube O.D. mm 50

Tube Slot I.D. mm mm 46

Rail Size mm

13x80 19-25

Base Cut Out Size mm mm 40

Mount Screws mm 6 r/h

BLA Finish Length Tube Code O.D. mm mm 192602 Mirror 192604 Gold

250 250

52 52

Tube I.D. mm

Rail Size mm

41 41

19-25 19-25

www.bla.com.au

331

section

HULL, DECK & CABIN HARDWARE

Flush Rod Holder

BLA Code 192543

Deck Intrusion Plate mm mm 112x82

210

Cut Out mm

Mount Screws mm

6 c/s

Heavy Duty Rod Holder

- With Cap

192545 106x85

215

BLA Code 192542

Deck Intrusion Plate mm mm 116x87

205

Cut Out mm

Mount Screws mm

6 c/s

Medium Duty Rod Holder

- With Cap

BLA Code

Deck intrusion Plate mm mm

192544 110x87

220

6 c/s

Stalon Rod Holder

BLA Code

Quality marine equipment

6 c/s

Mount Screws mm

BLA Code

210

Cut Out mm

Tough injection moulded nylon body with stainless steel cover. Sleek look with no visible fasteners. PVC sealing cap and mount gasket. 30º angled through deck mount. 6mm cross bar in base to align rod.

192549 112x88

Mount Screws mm

Flush Mount Rod Holder

Flush mounted, cast 316 stainless steel rod holder with black PVC liner and sealing cap. Supplied with 3/4" female BSP thread in base to accept a hose tail for draining away excess water. 6mm diameter pin in base of tube for rod alignment. 30º angled through deck mount.

deck intrusion Plate mm mm

Cut Out mm

Stainless steel fabricated construction with 30º angled deck mount. Protective white PVC liner. 5mm diameter pin in base of tube for rod alignment. Supplied with mount gasket.

Stainless steel flush deck mounting. Raised dome top. 6mm gimbal pin for rod alignment. White PVC sealing cap and insert. Black base mount gasket supplied. 30º angled through deck mount.

Deck Intrusion Plate mm mm

- With Cap

Stainless steel, flush deck mounting. PVC sealing cap, mount gasket and liner. Angled 30º. 6mm diameter pin in base of tube for rod alignment.

Flush, deck mounted, heavy duty cast stainless steel rod holder with a black PVC sealing cap and liner. Suitable for up to 80lb line class. 6mm diameter pin in base of tube for rod alignment. Rod holder angled at 30º.

BLA Code

332

Flush Rod Holder

- With Cap

Cut Out mm

Mount Screws mm

6 c/s

deck intrusion Plate mm mm

192559 103x92

235

Cut Out mm

Mount Screws mm

6 c/s

section

Flush Mount Rod Holders

Economical one piece moulded plastic construction. Textured finish deck plate. Angled 30ยบ. 6mm cross bar in base to align rod.

Economical, one piece moulded plastic construction with matt finished deck plate. Angled 30ยบ. 6mm cross rib in tube base to align rod. Weatherproof caps available separately. Mount Screws: 4mm countersunk.

BLA Colour Code 192560 White 192562 Black

Deck Cut Out Intrusion Mount Plate Screws mm mm mm mm 108x88 108x88

54 54

210 210

6 c/s 6 c/s

BLA Colour Deck Tube Intrusion Code Plate O.D. mm mm mm 192588 White 105x85 49 192590 Black 105x85 49

195 195

192598 Black cap and base gasket 192599 White cap and base gasket

Oval Flush Mount Rod Holders

Slimline Flush Mount Rod Holders

One piece moulded plastic construction with matt finished deck plate supplied with or without cover. 30ยบ angled tube with 6mm gimbal moulding in base to keep rods aligned. 106 x 83mm deck plate.

Economical, on piece plastic construction. Straight or angled through deck mount. Available in black or white. Mounting base measures 87mm x 60mm. 4mm countersunk mounting holes.

BLA Colour Cover Cut Intrusion Mount Code Out Screws mm mm mm 192566 White No 192567 Black No 192568 White Yes 192569 Black Yes 192571 Replacement cap 192573 Replacement cap

50 210 50 210 50 210 50 210 & gasket white & gasket black

6 6 6 6

c/s c/s c/s c/s

BLA Colour Type Tube Intrusion Code O.D. mm mm mm 192583 192584 192585 192586

White Black White Black

Angled Angled Straight Straight

49 49 49 49

210 210 235 235

Slimline Flush Angled Rod Holders

Slimline Flush Mount Rod Holders

Economical, one piece plastic construction. Angled through deck mount. Weatherproof caps available separately.

Economical, one piece plastic construction. Straight through deck mount. Weatherproof caps available separately.

BLA Colour Deck Code Plate mm

BLA Colour Base Tube Intrusion Mount Code O.D. Screws mm mm mm mm

192576 White 89x60 192578 Black 89x60

Tube Intrusion O.D. mm mm 49 49

220 220

Mount Screws mm 5 c/s 5 c/s

192580 White 89x60 49 192582 Black 89x60 49

230 230

5 c/s 5 c/s

192596 Black cap and base gasket 192597 White cap and base gasket

Side Mount Rod Holders

Economical one piece plastic construciton with multiple fixing side section. Mounts on any flat near vertical surface. Available in black or white. 6mm cross bar in the base to align rod.

New improved design. Economical one piece plastic construction with multiple side fixing section. Mounts on any flat, near vertical surface. Fins in base to align rod.

BLA Colour Width Height Depth Mount Code Screws mm mm mm mm

192593 White 192595 Black

192592 White 192594 Black

75 75

238 238

46 46

4 r/h 4 r/h

72 72

234 234

HULL, DECK & CABIN HARDWARE

Flush Mount rod Holders

50 50

4 r/h 4 r/h

www.bla.com.au

333

section

HULL, DECK & CABIN HARDWARE

Slimline Rod Holders

Side Mount Rod Holder Brushed stainless steel tube with heavy duty, black plastic complete ring mounting saddles. Top opening fitted with black moulded plastic cushion ring to protect rod. 6mm diameter cross bolt in base allows for both standard or gimballed fishing rods.

BLA Width Height Depth Code mm mm mm 192620

263

Polished stainless steel fabricated construction. 6mm gimbal pin for rod alignment. Angled or straight through deck mount.

Tube Mount I.D. Screws mm mm 41

4 r/h

Deck Plate mm

192534 Straight 80x59 192536 Angled 80x59

Cut Intrusion Mount Out Screw mm mm mm 44 44

Side Mount Rod Holder

Rod and Knife Holders

White plastic rod holder featuring flared top, slot to accept reels and open bottom for drainage. Stainless steel saddles as well as moulded in mount holes, offer a large variety of mounting options.

Vertically mounted, white plastic rod and fishing gear holders. Rod holders feature flared tops, slots to accept reels and open bottom for drainage. Slot and hole configuration in horizontal mounts holds knives, pliers, etc.

BLA Length Code mm 192648

305

Tube ID. mm

Clamp Width mm

103

Mount Screws mm 4 r/h

192634 192636 192638 192640

Horizontal, wall or overhead mounted, polymer rod racks. 50mm holes to accept rod butt and 19mm slots for rod tips. Supplied with variable position mount brackets and mount screws. Racks are handed and sold as a pair.

BLA Rods Length Depth Height Code Stored mm mm mm 192644 Four 385 81 65 192646 Six 555 81 65

Quality marine equipment

197 188

4 c/s 4 c/s

BLA Rods Knife Tool Width height Depth Mount Code Screws mm mm mm mm

Rod Racks - Polymer

334

BLA Mount Code

Mount Screws mm 3 c/s 3/c/s

2 3 4 6

1 2 6 4

1 2 3 3

275 440 605 605

305 305 305 305

Bull Bar Rod Holder - Alloy Stores up to four rods with simple 'U' bolt mounting onto bull bar. Sturdy, welded, all aluminium construction with cadmium plated 'U' mount bolts. Maximum bull bar tube diameter is 52mm. Check with local transport regulations before installing this product.

BLA Width Code mm 192624

427

Tube I.D. mm

Tube Length mm

150

63 63 63 63

5 5 5 5

r/h r/h r/h r/h

section

Rod Saver - Pro Serious anglers use many different rods. To accommodate a larger number of rods the Pro Rod holders are longer than the original rod savers (below) and incorporate a durable elasticised band to hold rods firmly in place. Sold as a single 350mm strap.

HULL, DECK & CABIN HARDWARE

BLA Code

Rods Stored

192618 Up to 8 rods

Rod Saver - Original

Rod Storage Holder - Horizontal

A simple but effective way to keep fishing rods in the boat and out of the water. Polyester webbing with hook and loop securing, stores virtually any combination of rod and reel. Sold as a single 250mm strap.

Used for storing rods horizontally onboard or at home. Anodised aluminium side plates with closed cell foam inserts to hold up to three rods. Sold as a pair.

BLA Code

BLA Length Depth Width Code mm mm mm

Rods Stored

Mount Screws mm

192616 Up to 5 rods

192625

Rod Storage Holders - Horizontal

Rod Storage Holders - Vertical or Horizontal

Used for storing rods horizontally onboard or at home. Constructed from black ABS plastic and supplied in either three or five rod combinations. Closed cell foam inserts ensure that rods are held in place. Sold as a pair.

Used for storing rods in a vertical position onboard or at home. Base incorporates recesses for rod butt, while closed cell foam inserts in other mount support rod stems. Black U.V. stabilised plastic frame. Sold as a pair.

BLA Rods Length Depth Width Mount Code Stored Screws mm mm mm mm

BLA Description Length Depth Width Code mm mm mm

192628 Three 192630 Five

192627 Three rod 192633 Five rod

195 290

73 62

62 52

4 c/s 4 c/s

210

195 290

5 r/h

73 62

62 52

Mount Screws mm 4 c/s 4 c/s

www.bla.com.au

335

section

HULL, DECK & CABIN HARDWARE

Ski Tow Hook - Stainless Steel

Ski Tow Eyes - Stainless Steel

Transom mounted ski hook. Chrome cast bronze base. Stainless steel hook and mount bolt. Keeper retains ski rope when slack.

Transom mounted, water sports tow eyes. Protector ring prevents snagging of clothing, ski equipment, ropes, etc. Hex nuts and star washers included.

e b

BLA Code c

192650

192652 192653

BLA a b c d e Code mm mm mm mm mm 40

15-55

Ring Protrusion Hull Mount Dia. Thickness Bolt mm mm mm mm

Mount Bolt mm 9

Ski Tow Ring

63 85

38 55

8-50 8-85

9 12

Sliding Transducer Brackets Fishfinder transducers on trailerable boats are susceptible to damage, particularly if launching off the beach. These adjustable transom mounted brackets enable the transducer to be retracted out of harms way until required. Transducer can be raised and lowered in seconds.

Flush fitting, stream lined ski tow ring manufactured from 316 grade stainless steel. Suitable for through transom mounting with large bearing surface to ensure that the fitting does not pull through.

BLA Code 192654

Outside Cut Out Hull Dia. Thickness mm mm ø mm 65

4-43 b 192656

192658

Stanchion - Stainless Steel Stainless steel tube with tapered upper section. Pressed fit stainless steel sleeve for mid height line. Enlarged top line head to protect crew and sails. Fits into 193672 and 192674 bases.

BLA length Code mm 192670

630

Tube Dia. mm

192666

25 d

Stanchion Bases Accepts stanchion 192670. Pressed stainless steel base plate. Reinforcement bar also allows attachment of blocks, etc.

192665 192667

BLA Material Transducer a b c d Code Type mm mm mm mm BLA Base Code Angle 192672 192674

336

0º 6º

Suits Tube mm 25 25

Base Height Mount Size Screws mm mm mm 76x88 76x88

Quality marine equipment

50 50

6 c/s 6 c/s

192656 192658 192665 192666 192667

S/Steel Thru hull S/Steel Transom mnt Alloy Transom mnt Alloy Transom mnt Alloy Thru hull

225 88 114 80 225 88 131 205 84 51 205 152 63 205 88 128 68

section

Double Hinged Cabin Hook - Chrome Brass

Brass body, stainless steel shackle. Supplied with two keys.

The double hinge design significantly reduces rattle over conventional cabin hooks. BLA Code

Base Length Depth Size mm mm mm

193020 42x26 193002

193004

193006

30 40 50 40

50 61 77 103

13 14 16 14

Mount Screws mm

4 c/s

193008

BLA Width Height Thickness Shackle Throat Code Dia. mm mm mm mm mm 193002 193004 193006 193008

100

5 6 8 6

18 22 29 64

Square Barrel Bolt - Stainless steel Spring self closing, square line barrel bolt. Mirror polished cast 316 grade stainless steel body with concealed mount fastenings. Nylon slide for smooth action and no rattle.

Cabin Hooks - Chrome Brass Available in a range of sizes.

BLA Length Code mm 193024 193026 193028

50 76 100

mount Screws mm 4 c/s 4 c/s 4 c/s

Heavy Duty Hasp and Staple - Twistlock

BLA Length Height Depth Code mm mm mm 193030

Cast stainless steel construction. Features twist lock closure, concealed fastenings and solid hinge pin. Accepts padlocks with up to 8mm shackle.

Mount Screws mm 5 c/s

Barrel Bolts - Chrome Brass

BLA length Width Height Code mm mm mm

Traditional style.

193040

Mount Screws mm

HULL, DECK & CABIN HARDWARE

Marine Padlocks - Brass

4 c/s

Barrel Bolts - Chrome Plated Bronze

BLA Code 193032 193034 193036

Barrel O/all Width Depth Mount Length Length Screws mm mm mm mm mm 50 75 100

65 90 115

22 22 26

10 10 10

3 c/s 3 c/s 3 c/s

Security Hasp and Staple - Stainless Steel Concealed fastenings. Accepts padlock with up to 8mm shackle. Pressed stainless steel construction.

Chrome plated bronze construction. Includes friction pad to eliminate rattling and provide smooth operation. BLA Length Height Depth Mount Code Screws mm mm mm mm 401970 401972

90 138

37 37

16 18

3 c/s 3 c/s

Flush Latch Sets Flush appearance. Lift tab and rotate to open. Available with or without key lock. Easily installed in 42mm diameter hole. No visible fastenings. Chrome plated zinc alloy and moulded plastic construction.

BLA Code 193044

O/all Width Height length mm mm mm 70

Mount Screws mm 4 c/s

BLA Key Face Code Lock mm 402052 No 402054 Yes

56x50 56x50

Door Protrusion Intrusion Thickness mm mm mm 12-19 12-19

5 5

23 23

www.bla.com.au

337

section

HULL, DECK & CABIN HARDWARE

Barrel Bolt

Barrel Bolts - Stainless Steel

- Stainless Steel

Rounded non catch styling coupled with cast 316 stainless steel construction and a rattle eliminating friction pad, has combined the simple installation and reliability of a barrel bolt with contemporary form.

BLA Length Height Depth Code mm mm mm 193031

105

Mount Screws mm

BLA Code

3 c/s

193037 193039

Magnetic Slide Catch Solid cast 316 stainless steel housing with non rattle nylon slide. Gone is the shock loading of conventional slam action doors as the magnetic mechanism only actuates when the slide and strike are parallel, in the fully closed position. Slide protrusion when closed can also be adjusted from 6mm to 20mm. Suits left or right hand, in or out opening doors.

O/all Height Depth Mount Length Screws mm mm mm mm 92 110

38 38

14 16

3 c/s 3 c/s

Spring Slide Catch - Stainless Steel Stainless steel housing with low friction nylon slide. Spring loaded flush latch will not catch clothing, ropes etc. Catch bolt is reversible for left/right for in/out installation.足足

BLA Code

Strong heavy gauge cast 316 stainless steel construction. Supplied with friction pad to eliminate rattle and to provide smooth operation.

70 11

193015

Transom Door Catch 316 stainless steel face plates, bolts and knob with nylon back housing for smooth silent operation. This product features a spring loaded, adjustable stroke stainless steel bolt. The bolt is reversible for in or out opening. A versatile catch that satisfies many requirements for marine door installations. Modern attractive recessed design. Striker plate has rubber stop bumper.

BLA Code

55 11 5 c/s

193016

Cupboard Catches - Nylon Simple but secure white nylon catch.

BLA Code

107

Cupboard Catch

Mount Screws mm

42x12 5 c/s & 4 r/h

Quality marine equipment

BLA Code

Stud Dim. mm

401998 28x11x17

Mount Screws mm

13 3 r/h & c/s 13 3 r/h & c/s

Simple black plastic catch that secures cupboard doors closed. Sold as pairs.

- Nylon

BLA Post Post Snap Code Base Dia. Length Base mm mm mm

338

21 28

Cupboard Catch - PVC

Snap catch with post mount, suitable for cupboards and small cabin doors.

b c closed mm

193018

193069

BLA Style a Code 193066 Straight 33 193068 Right angle 33

122

193068

Catch Dim. mm

Mount Screws mm

35x12x11

2 r/h

193066

section

Finger Catches

Brass body with twin spring loaded ball bearings. Screw adjustable catch tension. Cadmium plated spring and ball bearing.

Spring loaded catches for cupboard doors, etc. Supplied with catch plate. 193078 is supplied with teak dress trim for a perfect finish and to allow cupboard ventilation. Teak trim requires a 38mm mount hole and has a 13mm intrusion.

BLA Code 193072 193074

O/all Width Depth Length mm mm mm 43 60

8 11

11 15

Mount Screws mm

BLA Style Base Height Mount Code Screws mm mm mm

3 r/h & c/s 4 r/h & c/s

193075 Black plastic catch only 30x18 193076 Brass catch only 28x16 193078 Brass catch c/w ring 28x16

Push Lock Push the door to latch. Thumb push to open. Supplied with pull-open finger tab and latch plate. Materials: Nylon, glass reinforced acetal, stainless steel. Supplied with two keys.

BLA Code 193112

Door Thickness Max. mm

Out Dia. mm

Omni Spring Bolt Catches

3 c/s 3 c/s & r/h 3 c/s & r/h

Magnetic Finger Catches

30 28 28

An ingenious solution to positively catching Back drawers, cupboards and locker doors on boats. Closure is actuated by two attracting magnets. From outside only a stainless steel trimmed hole is visible. Single finger lift and pull to open. Suitable for interior installation. Right hand illustrated.

Front

- Stainless Steel

A versatile latch, flush fitting on both sides. Corrosion free material for interior or exterior installations. Suits 12.7mm (1/2") thick doors. Non rattle design. Three year warranty. Striker sold separately.

BLA Code

Hand

193146 Right 193147 Left

Omni Dead Catches

- Stainless Steel

A premium quality contemporary style dead bolt, flush fitting on both sides. Corrosion free materials for interior or exterior installation. Two distinct dead bolt positions, open or closed, not self closing. Suits 12.7mm (1/2") thick doors. Three year warranty. Striker Sold separately.

HULL, DECK & CABIN HARDWARE

Ball Catches - Brass

BLA Description Face Mount Code Screws mm mm 193046 Catch 193048 Striker

116x82 68x24

3 c/s 5 c/s

Flush Sliding or Bi-fold Oval Lock Corrosion proof design finished in stainless steel for outdoor or indoor applications in standard sliding doors. Suitable for 12.7mm (1/2") thick doors. Supplied with striker and two keys. Safety door system allows door to be locked from outside, yet still open from the inside.

BLA Face Code mm

Mount Screws mm

193095 148x99

3 c/s

193099 Spare key

BLA Description Face Code mm 193054 Catch 193048 Striker

Mount Screw mm

116x82 3 c/s 68x24 5 c/s

Sliding Door or Hatch Dead Locks Marine grade construction: polymide, stainless steel, aluminium and brass throughout. Suits door thickness of 12.7mm (1/2"). Easy to install. Use on acrylic or timber doors, bi-fold doors, swinging doors, hatches and companionway storm boards. Key lock on exterior with sliding privacy lock on interior side of lock. BLA Colour Face Code mm 193096 White 193097 Black

87x55 87x55

Mount Screw mm 3 r/h 3 r/h

193099 Spare key

www.bla.com.au

339

section

HULL, DECK & CABIN HARDWARE

Flush Sliding or Bi-fold Door Locks

McCoy Chrome Door Lock Sets

Suitable for sliding or bi-fold doors, of 12.7mm (1/2") thickness. Flush fitting on both sides of door. Key lock from the outside but with the ability to always be opened from the inside, to comply with fire and safety requirements. Materials: aluminium, stainless steel, plastic and brass.

Minimalist lock for cabin door applications. Chromed brass exterior finish offers complete protection against marine conditions. Brass interior mechanism. Mortise mount available to suit right or left hand opening doors. Available with or without locking privacy knob. Three year warranty. Striker sold separately.

134

15.7

4mm c/s mount screws 99

BLA Code

Finish

193092 Clear anodised aluminium 193093 White powder coated aluminium 193094 Stainless steel

5mm c/s mount screws

strike face 4.5mm

193101 Spare key

Compact Chrome Lock Sets An attractive chromed brass door lock with privacy lock that can be mortise mounted to open inward or outward. All brass and stainless steel internal mechanism. Lock can be overridden for emergency entry. Striker sold separately.

BLA Privacy Door Opening Code Lock 193088 193089 193090 193091 193369 193370 193371 193372 193375 193376

97 90

BLA Door Code Thickness mm 193098 19-32

Yes No Yes No Yes No Yes Yes Yes No

Right in Right in/left out Left in Left in/Right out Right out Right in/left out Right in Left out Left in Left in/right out

Left hand open inward door action. White powder coated finish. Privacy knob fitted on inside with key lock on outer. Suits door thickness 22-27mm. Two keys supplied, three year warranty. Striker sold separately. Materials: Cast zinc alloy, aluminium, plastic and brass.

strike face 4.5mm

Three sizes available to suit McCoy, Compact, Offshore and Omni catches. The 193060 includes a trim box that neatly finishes (a) (B) (C) woodwork or alloy cut outs.

strike face 6.5mm

(C)

135.5 115

6.4

9.5

12.5

BLA Description Face Code mm

340

22-30 22-30 22-30 22-30 28-37 28-37 28-37 28-37 28-37 28-37

Offshore Mortise Door Lock Sets

Striker Plates

Door Thickness mm

Striker Plate 6.4mm Striker Plate 9.5mm Striker plate 12.5mm

Quality marine equipment

68X21 68X24 68X28

100

Mount Screw mm 5 c/s 5 c/s 5 c/s

5mm c/s mount screws

BLA Code 193087 193099 Spare key

section

Push To Close Catch

Smart design, smart looks and quality of manufacture have been combined in this new unique range of marine door locks. Latches operate by using two attracting magnets, one in the latch slide, and another in the strike plate. When door is closed both magnets align and latch actuates. These latches operate quieter than conventional spring latches, 193396 brushed finish oval with 193397 optional gold trim and as the latch is held closed by magnetic force, there is no vibration induced rattle. Other unique features include a triangular lever shaft, whereby as door lever or knobs are tightened to the triangular shaft they are locked in place in three dimensions, so there is no possible slop or rattle, as is often associated with square shafts. Installation is easy as the design allows a wide tolerance range for the installer. The same latch can be used for left or right swing, open in or open out doors. Privacy latch on inside can be released in an emergency from outside, via a pin hole override. Available in mirror polished or brushed stainless finish with either lever or oval knob handles. A gold backing plate can also be purchased separately to provide a gold trim ring appearance, for that extra finishing touch.

Grabber catch with stainless steel, spring loaded, over centre latching. Side mounted to pull the door, drawer or hatch shut. Approx. Pull force is 44N pull to open. Corrosion resistant materials.

48 72 Open

Closed 35

BLA Code 193114

Push To Close Catches This flush catch features a pop out knob which twists to open. Catches securely with knob in or out. Corrosion and U.V. resistant. Supplied with nylon or stainless steel keeper. Quick, round hole installation. Materials: PC/ ABS blend (chrome finish), glass filled nylon and 304 stainless steel. Suits door thickness of 4mm to 21mm.

75 16 193381 Lever handle 90

97 62

BLA Code 193126 193130

Face a Cut Out Keeper Keeper Dia. Screws mm mm mm mm 37 37

47 47

31 31

S/S Nylon

HULL, DECK & CABIN HARDWARE

Magnetic Privacy Door Locks

5 r/h 4 r/h

Lever Catch Die cast zinc alloy lever catch. Large domed button for release, push catch handle to lever close. Key locking. Zinc plated mounting hardware. 75 16 193393 Oval handle

53x43

BLA Handle Finish Code

Door Size mm

193381 193382 193383 193384 193393 193394 193395 193396

19-25 28-35 19-25 28-35 19-25 28-35 19-25 28-35

Lever Lever Lever Lever Oval Oval Oval Oval

Mirror Mirror Brushed Brushed Mirror Mirror Brushed Brushed

193397 Optional gold trim ring

110

BLA Door Grip Code Thickness Range mm mm 193140 11-21

14-29

www.bla.com.au

341

section

HULL, DECK & CABIN HARDWARE

Latch Sets

Latch Sets - Flush

- Non Mortise

Locks by turn button from inside or a key from the outside. Interchangeable knob and lever handle. Supplied with a regular bevel and box strike or a reverse bevel with flush strike. Chromed zinc alloy construction. Escutcheon: 112 x 32mm.

Flush cup rim with fold away 'D' handle one side, lever other side. Sliding lock button. Supplied with a regular bevel with box strike or a reverse bevel with flush strike. Chromed zinc alloy construction.

(a)

(a) BLA Bevel Strike Code (a) 402030 Regular (B) 402032 Reverse

(b)

Door Door Mount Case Thickness Screws mm mm mm

Box Flush

100x50 100x50

(b)

16-35 16-35

3 c/s 3 c/s

BLA Bevel Strike Code

Case O.D. Door Mount Dim. Cup Thickness Screws mm mm mm mm

(a) 402022 Regular Box 45x55 (b) 402024 Reverse Flush 45x55

58 58

20-30 20-30

3 c/s 3 c/s

Latch Sets - Mortise

These latch sets have been designed for quick and easy mortised installation into plywood doors. Available in regular or reverse bevel with flush strike. Sliding lock button on inside only. Interchangeable knob and lever handle. Chromed zinc alloy construction.

Locks by turn button on inside and optional key lock on outside. Interchangeable knob and lever handle. Bevel can be reversed during installation. Supplied with flush strike. Chromed zinc alloy construction.

(b)

(A) BLA Bevel Strike Code

Case Door Mount Dim. Thickness Screws mm mm mm

BLA Key Lock Escutcheon Door Mount Code Lock Assembly Thickness Screws mm mm mm mm

402050 Regular 402051 Reverse

50x58 50x58

(A) 402040 Yes (b) 402046 No

Flush Flush

12-19 12-19

3 c/s 3 c/s

70x50 57x45

112x32 112x32

25-34 25-34

3 c/s 3 c/s

Table Bracket Set - Stainless Steel

Flush Paddle Catches

Used to mount a table on to bulkheads and be easily removed when not in use. Set comprises of four pieces, two wall and two table.

Attractive brushed stainless steel. Flush styling. Smooth push-to-close latching, pull paddle to open. Quick one screw mounting. Spring loaded paddle that wonâ&#x20AC;&#x2122;t rattle. Made from 304 grade stainless steel, aluminium and polyester thermoplastic.

- Stainless Steel

b a

BLA Code 193010

342

Wall Bracket mm

Table Bracket mm

Mount Screws mm

84x53

73x44

5 c/s

Quality marine equipment

BLA Code

face Cut Out Intrusion Panel a b Size Thickness mm mm mm Max. mm mm mm

193184 28x43 193186 68x84

25x38 54x70

13 36

2.0 6.4

12.5 15.0

4.0 7.5

section

Simplicity Flush Catches

Push button to unlock door, button extends to act as door knob. Push button to lock door, button remains in to leave flush surface. Matt nickel finish. Manufactured from plastic and zinc alloy.

Economical and easy to install. Self catching. Release catch with finger pull. Supplied with keeper. Made from acetyl and stainless steel.

BLA Code BLA Code

a mm

b mm

193150 20

c mm 12

d mm

193174 193176 193178

Door Outside Cut Out Keeper Thickness Dia. Screws mm mm mm mm 1-7 7-13 13-19

60 60 60

51 51 51

5 r/h 5 r/h 5 r/h

Flush Pull Catches

Compression Catch

Low profile attractively styled catches, ideal for lockers, galley doors and drawers. Self latching. Release catch with finger pull. Simple installation. Supplied with keeper. Made from white polycarbonate.

Large control knob utilises a quick action (75º) twist to lock/ unlock. Die cast zinc alloy housing with black acetal knob and black nylon spacer to allow knob to stand off panel. Adjustable position grip depth (maximum 65mm). Zinc plated bolt and tongue.

BLA Door Outside Code Thickness Dia. mm mm

Cut Out mm

193162 7-12 193170 17-22

50 50

61 61

BLA Code 193201

Knob Dia. mm

Mount Door Hole Thickness mm mm

Novibra Door Catches As the name suggests, the 'Novibra' prevents vibration generated lock noise. Easy to fit and 100% corrosion resistance make this catch suitable for a wide variety of interior and exterior applications. Adjustable strike plate provides firm contact between latch and strike at all times. Three year warranty.

Flush Pull Catches Low profile styled catches, ideal for lockers, galley doors and drawers. Self latching. Release catch with finger pull. Simple installation. Supplied with keeper. Available in locking or non-locking. Made from polycarbonate and stainless steel.

193189

193187

BLA Colour Key Door Outside Cut Keeper Code Lock Thickness Dia. Out Base mm mm mm mm mm 193155 193187 193189 193191

Black White Black White

No No Yes Yes

0-18 0-18 0-18 0-18

61 61 61 61

51 51 51 51

32x15 32x15 32x15 32x15

193229 Spare key

Flush Catches

– Stainless Steel

Low profile stainless steel flush pull catch, ideal for lockers, galley doors and drawers. Self latching with finger pull release. Simple installation. Supplied with keeper. Available in locking or non-locking.

BLA Door Outside Code Lock Thickness Dia. Cut Out mm mm mm 193208 No 193209 Yes

7.5-13.5 7.5-13.5

44 44

37 37

193149

BLA Turn Cup Code Handle 193149 Satin Satin 193151 Black Chrome

HULL, DECK & CABIN HARDWARE

Push Button Catch

193151

Flange Cut Out Intrusion O.D. mm mm mm 45 45

38 38

45 45

Lift Ring Catches Precision cast 316 stainless steel lift ring catch with optional key lock mechanism. Simple single hole installation. Latch is operated by rotating lift ring 180º. Red dot on lift ring indicates the unlatched position for easy visual identification. An optional insulator kit is available for installation in aluminium.

BLA Key Door Outside Cut Lock Mount Code Lock Thickness Dia. Out Reach Screws mm mm mm mm mm 193061 No 193063 Yes

0-18 0-18

64 64

51 51

18-68 18-68

5 c/s 5 c/s

193229 Spare key

www.bla.com.au

343

section

HULL, DECK & CABIN HARDWARE

Flush Catches

Waterproof Flush Catches

- Stainless Steel

Heavy duty 316 grade stainless steel flush catch assembly. Self latching. Release is via two finger lift tab. Available with or without integral lock assembly. 193122 also features stainless steel grab tab to facilitate internal closing.

- Stainless Steel

Self closing flush top catch with only 3mm protrusion. The highly polished cast 316 stainless steel housing and waterproof non-rattle mechanism make this catch suitable for both interior and exterior installations. Operates by pushing down the finger tab to flip up the ring pull. Supplied with a variety of back spacer rings to accommodate varying material thickness. An insulator kit is available separately for installation in aluminium.

193122

193182 193212 193213 193180

BLA Lock Catch Catch Deck Keeper Code Flange Cut Out Thickness Base mm mm mm mm

BLA Key Door/Floor Outside Code Lock Thickness Dia. mm mm

Cut Out mm

Keeper Base mm

193180 No 193182 Yes 193122 Yes

193212 No 193213 Yes

51 51

15x32 15x32

Outside Dia. mm

Cut Out mm

Lock Mount Range Screws mm mm

63 63 63

51 51 51

32-45 5 c/s 32-45 5 c/s 32-45 5 c/s

60 60 60

51 51 51

0-18 0-18 0-18

32x15 32x15 32x15

0-18 0-18

60 60

193229 Spare key

Waterproof Flush Catch - Stalon

Nylon 'T' Handle Catches

Self closing flush top catch with only 3mm protrusion. Highly polished cast 316 stainless steel top housing. Nylon back housing for reduced weight. Operate by pushing down the finger tab to flip up the ring pull. Supplied with a variety of back spacer rings to accommodate varying material thickness. An insulator kit is also available for installation in aluminium.

Glass reinforced nylon base is durable and is suitable for installation in aluminium boats without requiring insulators. Available with cast stainless steel handle or glass reinforced nylon handle. Stainless steel mechanism. 193214

BLA Colour Handle Code 193222 White 193239 Black 193240 White

193215

BLA Key Door/Floor Outside Code Lock Thickness Dia. mm mm

Cut Out mm

Keeper Base mm

193214 No 0-18 193215 Yes 0-18 193229 Spare key

51 51

15x32 15x32

60 60

Nylon S/Steel S/Steel

Flush Hatch Catches Black plastic face. Stainless steel 'D' ring handle, stem and lock nut. Two 'O' rings for increased water resistance. Indicator shows open or closed position. Flexible plastic strike plate prevents rattling while keeping latch closed. Key lock available for added security. Water resistant fibre reinforced plastic cover available separately.

'T' Handle Flush Catches Round plastic flush catches with chrome plated zinc alloy 'T' handle available in locking or non-locking versions. Locking model features a rubber seal under the handle to resist water entry into the lock cylinder.

BLA Colour Key Code Lock 402064 Black 402065 White

344

Yes Yes

Quality marine equipment

Flexible plastic strike plate

Outside Cut Out Dia. mm mm 75 75

62 62

Lock Reach mm 20-70 20-70

BLA Key Face Code Lock mm

Cut Hatch Lock Mount Out Thickness Reach Screws mm mm mm mm

402066 No 402068 Yes

51 51

63x63 63x63

10-75 10-75

402070 Black hinged cover (68x82) 402072 White hinged cover (68x82)

14-75 14-75

4 c/s 4 c/s

section

Floor Hatch Catches

Deck Lock Thickness Reach mm mm

BLA Key Face Code Lock mm

Lock Mount Reach Screws mm mm

193226 No 193228 Yes

35-90 35-90

193220 No 97x80 13-19 35-90 193234 Yes 97x80 13-19 35-90 193229 Spare Key 193235 Insulation flange kit for aluminium installation

193229 Spare Key

Floor Hatch Catches

Flush Ring Catch

- Stainless Steel

Face Dia. mm

193230 No 79 193232 Yes 79 193229 Spare Key

4 c/s 4 c/s

- Chrome Plated

Rectangular shaped, combination single finger lifting ring and spring loaded catch. Ideal for anchor wells, lockers, floorboards, etc. Supplied complete with strike plate. Manufactured in chromed zinc alloy with phosphor bronze spring.

Heavy duty cast 316 grade stainless steel flush floor hatch latch. Lift up 'T' handle twists to latch. Spring loaded handle with rubber tabs to prevent rattling. Reversible latch pawl to accommodate a wide clamping range. Mount screws are concealed. Available with key security lock.

BLA Key Code Lock

97x75 97x75

Deck Thickness mm

Lock Reach mm

3-19 3-19

35-90 35-90

193232

BLA Length Width Intrusion Split Mount Code Screws mm mm mm mm mm 402074

Slimline Hatch Fasteners

Toggle Catches

Over centre cam action catch available in chrome plated cast brass or cast 316 stainless steel construction. Complete with eye for up to 6mm padlock. Shackle available in flat or angled mount.

Over centre cam action catch with provision for up to 6mm padlock shackle. Available in cast 316 stainless steel or chrome plated cast brass construction.

45/12

3 c/s

HULL, DECK & CABIN HARDWARE

Heavy duty cast 316 stainless steel flush floor hatch latch. Spring loaded handle to prevent rattling. Lift up ‘T’ handle twists to latch. Key locking option also available. Reversible latch pawl to accommodate a wide clamping range.

Floor Hatch Catches - Stainless Steel

- Stainless Steel

193242 193243

BLA Material Style Length Width Height Mount Code Closed Screws mm mm mm mm 193241 193242 193243 193244

Stainless steel Flat Chrome brass Flat Stainless steel Angled Chrome brass Angled

95 95 87 87

28 32 28 32

19 18 19 18

4 4 4 4

c/s c/s c/s c/s

Vantage Down Under™ Catch - Stainless Steel Strong, compact, over centre catch. Totally covered mechanism when closed. Reach length can be adjusted. Complete stainless steel construction.

BLA Length Width Code Closed mm mm 193250 70-78

Height Closed mm 23

Mount Screws mm 4 r/h

BLA Material Length Width Height Mount Code Screws mm mm mm mm 193246 Chrome Brass 193247 Stainless Steel

97 100

46 46

25 25

4 c/s 4 c/s

Adjustable Cam-Action Fasteners - Stainless Steel Pressed stainless steel construction. Over centre cam action. Length can be adjusted via threaded stem. Security eye for padlock incorporated in base.

BLA Code

O/all Width Closed mm mm

193272 84-96 193274 147-159

26 40

Height Mount Padlock Closed Screws Shackle mm mm mm 16 23

4 c/s 4 c/s

6 9

www.bla.com.au

345

section

HULL, DECK & CABIN HARDWARE

Versa Latch Tension Catches

Door Catches

Over centre type flat mount catch. Torsion springs compensate for application irregularities. Lockable version accepts padlock with up to 10mm shackle. All stainless steel construction.

Strong and secure, roller operation for ease of use. Doors are held firmly yet release with ease when required thanks to the roller action of the clamp.

BLA Code

193290

193292

BLA Type Code 193290 193292

104 104

Door Stop Catches

48 48

15 22

Clamp Tongue Depth Mount Base Base Closed Screws mm mm mm mm

193064 34x20 31x18 193065 40x35 41x22

O/all Width Height Mount Length Screws mm mm mm mm

Non-locking Lockable

- Stainless Steel

5 r/h 5 r/h

- Stainless Steel

Self latching door catch to hold door in open position. Rubber bumper stop to protect door. Cast 316 stainless steel construction.

29 41

4 r/h 4 r/h

Magnetic Door Catch Designed primarily as a door catch, but suitable for many other applications. Powerful magnet holds about 3kgs. Cast 316 stainless steel housing with magnet capsulated in epoxy to protect against marine conditions. Pivoting magnetic spherical section self aligns.

(A)

BLA Code

Description

193293 Door catch complete 193295 Additional base only (A)

Door Stop BLA Code 193288 193289

Stand Off mm

Base Dia. mm

Tab Base mm

62 87

50 50

24x30 24x30

Adjustable Door Catch

Tab Mount Height Screws mm mm 17 17

Chrome plated zinc alloy base with a rubber bumper to protect door.

4 c/s 4 c/s

- Cast Stainless Steel

Multi position adjustable length with magnetic self aligning catch. Magnetic catch allows instant operation. Holding power 3kg. Cast stainless steel housing with magnet encapsulated in epoxy to protect against marine conditions.

BLA O.D. Depth Code mm mm 401978

Mount Screws mm 3 c/s

Door Stop and Catch

36-60

(A)

Chrome plated bronze base, stem and hook. Rubber bumper protects door surface. Hook holds door in the open position.

4 c/s

47 51

(B) 38

BLA Code

Description

193294 Adjustable door catch (A & B) 193295 Additional base only (A)

346

Quality marine equipment

BLA Code 401984

Base Stand Saddle Mount Dia. Off Base Screws mm mm mm mm 45

31x17

4 c/s

section

Link Lock速 Rotary Action Catches - Stainless Steel

BLA Style Code 193320 193322 193324 193328

O/all Width Height Mount Length Screws mm mm mm mm

Non-lockable Lockable Non-Lockable Spring Loaded

58 62 50 60

38 38 38 47

15 24 15 15

3 3 3 3

193320

r/h r/h r/h r/h

193322

Hatch Fasteners - Rubber

Cam Action Catches - Elastomer

Moulded in black EPDM rubber with pressed stainless steel brackets. 'T' handle for ease of operation. Ideal for applications where there is constant vibration, movement or misalignment.

Combination over centre tensioning action with elastomer stretch body. Made from black thermoplastic elastomer, glass reinforced nylon and stainless steel.

(B) (A)

(A) BLA Length Width Depth Code mm mm mm 193350 193352 193354

75 106 150

48 60 79

Mount Screws mm

20 32 32

(B)

3 r/h 5 r/h 5 r/h

BLA Keeper Code

Screw Hatch Fasteners - Chrome Brass

(A) 193340 Concealed 98 (B) 193342 Right Angled 112

Chrome plated brass construction. Right angled fastening plate. Screw tighten.

Mount Base mm

193284

42x20

Stem Adjustment Mount Size Screws mm mm mm 8

32 32

20 20

4 r/h 4 r/h

Flexible Catch - Elastomer

193284

BLA Code

Length Width Height Mount Closed Screws mm mm mm mm

4 r/h

Max Length mm 70

Screw Hatch Fastener - Chrome Brass Solid chrome plated cast brass construction. Screw down tension adjustment via knurled nut.

A constant pressure fastener that can be used in almost any application, even around corners. Radiused edges to prevent hang-up or injury. Self aligning. Made from black thermoplastic elastomer and glass reinforced nylon. BLA Length Width Depth Mount Code Screws mm mm mm mm 193360

106

Door Catch

HULL, DECK & CABIN HARDWARE

Positive twist lock action catches. Twist handle folds flat when not in use. Supplied with keeper. Ideal for lockers, hatches and in-line covers. All stainless steel construction. 193328 incorporates a tension spring to maintain fastened pressure and/or allow for movement.

5 r/h

- Chrome Brass

Simple twist lock door catch. Chrome brass base and lock bar. A coil spring controls lock bar friction and also prevents rattling. BLA Code

Mount Bases mm

Max Length mm

193280

40x30

Door Catch

Stem Adjustment Mount Dia. Screws mm mm mm 9

- Stainless Steel

Premium quality, 7mm thick, highly polished cast stainless steel construction. Smooth action with positive detents in closed and open position. Mount screws are hidden when catch is in closed position. Friction pad on lock bar prevents free rotation and rattle.

4 c/s

BLA O.D. Protrusion Mount Code Screws mm mm mm 193380

193378

193398

5 c/s

3 c/s

Round chrome plated brass knob with brush finished stainless steel centre disk. BLA Code

Cabinet Knob

BLA O.D. Depth Mount Code Screws mm mm mm 60

Knob Dia. mm 31

Base Protrusion Thread Dia. mm mm UNC 16

10-32

www.bla.com.au

347

section

HULL, DECK & CABIN HARDWARE

Butt Hinges - Brass

Hatch Hinge - Cast Stainless Steel

Extruded brass construction. Brass pin. Sold as a pair.

Extra heavy duty cast stainless steel construction. Designed for heavy deck hatches, engine boxes, etc. Removable pin. Sold as a pair.

193410

BLA Length Width Mount Code Flat Screws mm mm mm 193402 193404 193406 193408 193410

38 51 63 76 101

22 27 35 41 60

3 3 4 4 5

c/s c/s c/s c/s c/s

BLA Length Width Height Split Mount Code Flat Screws mm mm mm mm mm

193402

193438

47/20

5 c/s

Dual Pivot Hinge - Cast Stainless Steel

Strap Hinges - Cast Stainless Steel

Twin pivot pins with link plate.Totally flat for flush mounting but still providing 180Âş hinging. 316 grade cast stainless steel construction. 2mm thick hinge plates. Sold as a pair.

Heavy duty cast 316 grade mirror polished stainless steel. 4mm thick hinge plates. Sold as a pair.

193482

BLA Code 193448

Length Width Depth Flat mm mm mm 71

BLA Code

Mount Screws mm

193480 193482

4 c/s

193480

Length Width Height Mount Flat Screws mm mm mm mm 104 155

26 26

9 9

5 c/s 5 c/s

Hinges - Cast Stainless Steel

Hinges - Stainless Steel

Heavy duty cast 316 stainless steel construction and mirror polished. Manufactured with 5mm thick plates and a 12mm diameter barrel. Close tolerance and invisible welded in pin minimises vibration induced rattle. Sold as a pair.

Light duty pressed stainless steel construction. Raised form complements the aesthetics and increases stiffness. Plate thickness is 2mm. The hinge barrel is rolled. Pressed end solid stainless steel pivot pin.â&#x20AC;&#x2C6;Sold as a pair.

193484 193524 193485

193526 193481

193483

BLA Code 193481 193483 193484 193485

348

193528

Length Width Height Split Mount Flat Screws mm mm mm mm mm 154 120 120 82

35 35 35 35

13 13 13 13

Quality marine equipment

77/77 77/43 77/43 41/41

5 c/s 5 c/s 5 c/s 5 c/s

BLA Code 193524 193526 193528

Length Width Height Split Mount Flat Screws mm mm mm mm mm 105 156 131

31 31 31

7 7 7

53/53 78/78 78/53

4 c/s 4 c/s 4 c/s

section

Hinges - Cast 316 Stainless Steel

193452

193456

193454

193460

HULL, DECK & CABIN HARDWARE

This range of hinges combine the durability of cast 316 stainless steel construction with low profile unobstructive design. The plates are only 3mm thick, yet have been tested to a break load of 1200kg. Hinge pins are not visible. They are welded at both ends and highly polished to blend with the hinge barrel. Because the pin is locked to one base plate and hinge barrel joint gap is kept to less than 0.2mm, there is minimal hinge play and rattle with engine vibration. Sold as a pair.

193462 193464

193472

193473

193466

BLA Length Width Depth Split Mount Code Flat Screws mm mm mm mm mm

Off Set mm

193452 193454 193456 193460 193462 193464 193466 193472 193473 193474 193475 193476 193477 193478 193479

– – – 10 – – – – – – – – – – –

76 108 144 50 50 60 70 76 106 60 74 38 52 104 154

193476

193475

193474

38 38 38 38 38 38 38 38 38 38 38 38 50 26 26

7 7 7 17 7 7 7 7 7 7 7 7 7 7 7

38/38 40/68 72/72 15/35 25/25 25/35 35/35 38/38 53/53 40/20 54/20 19/19 26/26 52/52 77/77

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s

193478 193477

193479

www.bla.com.au

349

section

HULL, DECK & CABIN HARDWARE

Hinges - Pressed Stainless Steel Medium duty pressed stainless steel hinges. Plate thickness is 2.0mm and the hinge barrel is rolled. Pressed end, solid stainless steel pivot pin. Sold as a pair.

193556

193552

193550 193554 193536

193570

193542

193540

BLA Length Width Depth Split Mount Code Flat Screws mm mm mm mm mm

Off Set mm

193536 36 193540 66 193542 75 193550 40 193552 56 193554 86 193556 76 193570 78 193572 126 193574 178 193576 74 193578 107

10 10 20 – – – – – – – – –

41 41 41 41 41 41 41 41 41 41 41 38

20 20 30 10 10 10 10 10 10 10 10 7

18/18 18/48 23/52 20/20 18/38 38/48 38/38 39/39 37/89 89/89 37/37 41/66

4 4 4 4 4 4 4 4 4 4 4 4

c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s c/s

193574

193572

193578

193576

Covered Hinges - 316 Stainless Steel All of the fast and easy installation advantages of a conventional pressed stainless steel hinge, but with the addition of a stainless steel cover plate to hide fastenings. An added advantage of the covers is that it assists in shedding water away from screw holes. Covers are held in place with permanent adhesive pressure sensitive tape. Covers can be removed without damage by using a heat gun to soften adhesive. Sold as a pair.

193600

193614

193602

193610

193606 193608

193612

BLA Code 193600 193602 193606 193608 193610 193612 193614

350

Length Width Depth Split Flat mm mm mm mm 36 58 80 80 74 74 66

40 40 40 40 80 80 66

Quality marine equipment

9 9 9 7 9 7 9

18/18 18/40 40/40 40/40 37/37 37/37 33/33

Mount Screws mm 4 c/s 4 c/s 4 c/s 4 c/s 4 c/s 5 c/s 5 c/s

section

Piano Hinges - Stainless Steel

Handy, continuous hinge, designed to be cut to any length. 101 uses for lids, doors, etc. Pre-drilled fastening holes. Sold individually.

Handy, continuous polished stainless steel hinge. Designed to be cut to any length for all lids, doors, etc. Sold individually. (A)

(B)

BLA Length Code mm 193414 2000

Width Open mm

Depth Open mm

BLA Length Width Code Open mm mm

Mount Hole Screws Centre mm mm 3 c/s

(B) 193584 (A) 193588 (B) 193590 (B) 193591

Butt Hinges - Cast Stainless steel Heavy duty cast 316 grade stainless steel construction. Mirror polished 4mm thick hinge plates. Radiused edges, no sharp corners. Close tolerance and invisible welded in pin, minimises vibration induced rattle. Sold as a pair.

1220 2000 1820 1820

Depth Open mm

43 32 41 48

Mount Hole Screws Centre mm mm

5 3 5 7

3 r/h 3 c/s 3 r/h 5 r/h

25 60 25 25

Separating Hinges - Cast Stainless Steel Polished cast stainless steel. Extra heavy duty separating hinge to suit engine covers, ice boxes, etc. 5mm thick hinge plates. Sold individually. 193486

193487

193468

193470

BLA Length Code mm 193468 193470

101 150

Width Depth Flat mm mm 82 98

11 13

Mount Screws mm

193487

BLA Hand Code

6 c/s 6 c/s

193486 193487

Separating Hinges - Cast Stainless Steel Polished cast 316 grade stainless steel construction. Extra heavy duty low profile separating hinge to suit engine covers, ice boxes, etc. 8mm thick hinge plates. Sold individually.

Left Right

99 99

106 106

17 17

BLA Length Code mm

6 c/s 6 c/s

Butt Hinges- Stainless Steel

193592

Medium duty pressed stainless steel butt hinges. Sold as a pair.

193594

193596

193592 193594 193596 193598 193622

52 73 88 104 75

Width Depth Flat mm mm 40 50 60 75 40

90 90

52 52

18 18

5 c/s 5 c/s

Does not require recessing into door frame. Pressed, polished stainless steel construction. Sold as a pair.

193580

BLA Length Code mm

Left Right

Mount Screws mm

Non Mortise Butt Hinge - Stainless Steel

BLA Hand Length Width Depth Mount Code Flat Screws mm mm mm mm 193491 193492

Length Width Depth Flat mm mm mm

6 8 9 10 6

Width Depth Open mm mm 51

HULL, DECK & CABIN HARDWARE

Piano Hinge - Brass

Mount Screws mm 4 c/s

Hinge - Separating Manufactured from polished chrome plated brass with stainless steel spring and pin. Suitable for vertical or horizontal mounting of hatches, locked doors, or any door or panel that needs to be hinged and removed. Supplied as a pair, one left, one right.

Mount Screws mm 3 4 5 5 5

c/s c/s c/s c/s c/s

BLA Length Code mm 193657

Width Depth Open mm mm 63

Mount Screws mm 5 c/s

www.bla.com.au

351

section

HULL, DECK & CABIN HARDWARE

Hinged Handle - Nylon

Butt Hinges - Nylon

Satin finished white U.V. stabilised all nylon construction. Commonly used as carry handle for ice box. Designed for installation on vertical surfaces, the handle hangs flat when not in use, in the carry position the handle locks at 45ยบ above square, allowing the handle to be easily gripped, forehand or backhand. Contoured shape with no sharp edges.

Moulded from tough nylon. Stainless steel pivot pin. Sold as a pair.

BLA Code mm

193628 193630 193632 193634 193636 193638

193640

Handle Down Height Depth mm mm 112

193628

BLA Length Code Black White mm

Handle Up Width Mount Height Depth Screws mm mm mm mm

129

5 r/h

Separating Hinge - Nylon

38 51 64 76 89 101

22 28 35 41 50 59

Mount Screws mm

5.5 7 7 9.5 10 12.5

3 3 3 5 5 5

c/s c/s c/s c/s c/s c/s

Manufactured from U.V. stabilised moulded plastic with stainless steel fastener support plates. The spring loaded slide pin allows quick and easy removal of hatches, locker doors etc. Suitable for use on both vertical and horizontal surfaces. Sold as a pair, one left and one right.

BLA Length Width Depth Split Mount Flat Screws Code mm mm mm mm mm 78

193650 193652 193653 193654 193655 193656

Width Depth Flat mm mm

Spring Release Hinges

Satin finished white U.V. stabilised all nylon construction commonly used on ice box lids. Hinge can be separated when in the fully open position, allowing total removal of the cover or lid. Pivots 80ยบ forward and 80ยบ backward of inline position. Sold as a pair.

193644

193652

28/50

BLA Colour Length Width Depth Code mm mm mm

5 r/h

193660 Black 193662 White

Hinges - Nylon Manufactured in three styles in black or white. Frosted finish, U.V. stabilised glass filled nylon with stainless steel pins. Suitable for both internal and external use. Sold as a pair.

73 73

50 50

Mount Screws mm

13 13

5 r/h 5 r/h

Hinges - Nylon Solid construction for commercial or heavy duty applications. Strong U.V. stabilised black nylon with stainless steel pins. Contoured shape has no sharp edges. 8mm thick hinge plates. Sold as a pair.

193672

193678

193674

193682

BLA Colour Length Width Depth Mount Code Flat Screws mm mm mm mm 193670 193672 193674 193676 193678 193680

White Black White Black White Black

40 40 60 60 80 80

37 37 37 37 37 37

10 10 10 10 10 10

4 4 4 4 4 4

c/s c/s c/s c/s c/s c/s

193684

193686

Door Hinge - Self Holding Automatically holds doors open to 120ยบ. Secure snap on covers hide fastenings for a very clean appearance. Stainless steel detent tube and black acetal construction.

BLA Code 193699

352

Length Width Depth Flat mm mm mm 52

Quality marine equipment

193692

193690

193694

193698

BLA Length Width Depth Split Mount Code Flat Holes mm mm mm mm mm

Mount Screws mm 5 c/s

193682 193684 193686 193690 193692 193694 193698

80 80 80 100 120 145 170

53 79 103 53 53 53 53

16 16 16 16 16 16 16

40/40 40/40 40/40 40/60 60/60 60/85 85/85

5 5 5 5 5 5 5

c/s c/s c/s c/s c/s c/s c/s

section

Lift Rings - Stainless Steel

Single finger flush pull in chrome plated cast brass. For lifting smaller size floorboards, hatches, etc

Smooth lines, rounded edges, spring loaded anti rattle handle, concealed fastening holes under handle and mirror polished cast 316 grade stainless steel construction, combines to deliver a unique lift ring handle. Suitable or interior or exterior use on hatches, doors, lockers etc.

BLA Face Intrusion Mount Code Screws mm mm mm 193700 51x38 193708 62x47

8 9

4 c/s 4 c/s

Round Lift Ring - Chrome Brass Single finger flush ring pull in chrome plated cast brass. For lifting smaller size floorboards, hatches, etc.

193703

193704

BLA Face Intrusion Protrusion Mount Code Screws mm mm mm mm 193703 51 193704 51x52

12 12

6 6

4 c/s 4 c/s

Anti Rattle Lift Rings BLA O.D. Intrusion Mount Code Screws mm mm mm 193706

4 c/s

Manufactured in polished, pressed stainless steel. Single finger lifting ring is spring loaded to prevent rattle. 193716

Rectangular Lift Ring - Chrome Brass Two finger flush lift handle in chrome plated cast brass. For lifting larger size floorboards, hatches, etc.

193714

193718

BLA Face Intrusion Mount Code Screws mm mm mm BLA Face Intrusion Mount Code Screws mm mm mm 193710 76x53

193714 76x57 193716 66x56 193718 44x38

11 11 10

193718

4 c/s 4 c/s 4 c/s

5 c/s

HULL, DECK & CABIN HARDWARE

Rectangular Lift Rings - Chrome Brass

Floor Lifting Ring - Stainless Steel Rectangular Lift Ring - Stainless Steel Single finger, cast stainless steel flush pull. Suitable for use on smaller floorboards, ice box lids, hatches, etc.

BLA Face Intrusion Mount Code Screws mm mm mm mm 193720 48x38

Polished, pressed stainless steel base. Solid rod stainless steel two finger grip. For lifting larger size floorboards, hatches, etc.

BLA Face Intrusion Mount Code Screws mm mm mm mm 193722 76x58

5 c/s

4 c/s

Concealed Pull Hatch Pull

- Stainless Steel

A simple but neat drop down mushroom handle for lifting floor boards, etc. The top disk has a reversed bevelled edge to ensure easy initial grip at the fully down position. 1/4" installation hole.

Unobtrusive, flush surface when not in use. Simply push to expose handle. Can be mounted on vertical and horizontal surfaces. Nylon handle and enclosed nylon housing. Ideal for cupboards, lockers, floorboards, etc. Mounting screws supplied.

BLA Code

Cap mm

Shaft mm

BLA Length Width Intrusion Code mm mm mm

193728

32x3

6x51

193730

Working Load kg 70

www.bla.com.au

353

section

HULL, DECK & CABIN HARDWARE

Hand Rail - Stainless Steel

Hand Rails - Stainless Steel

Versatile size and styling enable this handle to be used for doors, drawers, engine covers, hatches, or as a single hand grab rail. Manufactured from 304 stainless steel. 24 x 18mm oval tube. Threaded inserts welded in base for concealed fastening from beneath. Dim: 162(l) x 45(h) mm, base: 24 x 21mm, thread: 1/4" UNC.

24x18mm oval stainless steel tube. Mount disks can be removed allowing the handle to be mounted directly to the deck via bolting from under the deck into the threaded inserts welded in base handle. Dim: height: 60mm, base dia: 57mm, mount screws: 6mm c/s. BLA Length Code mm 193994 256 193996 333 193998 483

BLA Code 193978

Hand Rails - Stainless Steel

Manufactured from 22mm highly polished stainless steel tube. Choice of 5/16" UNC recessed nuts, or studs welded into the 32mm round bases. Dim: stud length: 35mm, height: 60mm.

25mm highly polished stainless steel tube with 4mm thick mount pads for through bolting. Dim: height: 70mm, base: 54 x 32mm, mount screws: 6mm c/s.

BLA Code 194004 194006 194007 194008 194010 194012

Length mm

Type

235 310 465 235 310 465

Threaded Threaded Threaded Stud Stud Stud

BLA Length Code mm 194020 302 194022 378 194024 530

Grab Handle - Covered Screws Streamlined, moulded handle with built in fastening covers. Soft textured finish cover over moulded plastic frame, modern contoured shape. Dim: 235(l) x 60(h) mm, base: 46 x 30mm, mount screws: 6mm r/h.

Grab Handle - Chrome Plated Brass Solid chrome plated cast brass handle. Dim: 122(l) x 27(h) mm, base: 32 x 21mm, mount screws: 4mm c/s. BLA Code BLA Code

194034 Off white

194030

Grab Handles - Snap Cover

Soft Grip Grab Handles - Plastic This square line styled grab handle is moulded in high impact plastic with a soft leather grained vinyl, non-slip finish. Snap covers conceal bolt holes. Dim: 237(l) x 50(h) mm, mount screws: 6mm r/h.

BLA Code

Colour

194040 Black 194044 White

OEM styled hard grip handle with integrated hinged caps, which snap over the mount holes so fasteners are not visible after mounting. No loose caps makes installation handling easier and eliminates cap loss. Textured to blend with most interior or exterior applications. Dim: 225(l) x 57(h) mm, base 40 x 29mm, mount screws: 6mm r/h.

BLA Code

Colour

194046 Black 194048 White

Adjuster Arm - Stainless Steel Grab Handles - Stud Mount Contour styled grab handle, moulded from flexible polypropylene. Leather grain finish soft grip. 1/4" UNC mount studs, 40mm long. Dim: 235(l) x 35(w) x 58(h) mm.

BLA Code

Colour

194060 Black 194062 White

354

Quality marine equipment

Light duty pressed stainless steel support for hatches and windows. Black plastic locking knob. 35 x 19mm mount one end, 48 x 12mm mount the other.

BLA Length Code mm 193752

240-410

Mount Screws mm 4 r/h

section

Spring Support Arm - Stainless Steel

Suitable for medium duty applications. Large hex clamping nut locks support into position. One mount attachment swivels, the other pivots.

Stainless steel spring style hatch and window support. When hatch or window is in an open position the spring coil becomes a rigid support. To close, apply side pressure to the middle of the spring coil and the support will collapse to a closed position.

BLA Code BLA Length Code mm 193754

Push Rod Dia. mm

Mount Bases mm

Mount Screws mm

45x19

5 c/s

290-470

Manufactured from super tough poly material which resists sunlight and chemicals. This drink holder has a large diameter lip to provide a neat installation. A hose tail on the bottom accepts 10mm ID hose so any spills, spray or rainwater can be drained away. Holds drinks up to 90mm in diameter and accepts stubbie with cooler.

194102 Black 194103 White

95 95

110 110

Spring Dia. mm

Mount Bases mm

Mount Screws mm

280

40x13

4 r/h

Recessed Drink Holders

194107 194106

Inside Dia. mm

Intrusion mm

BLA Cut Out Outside Code Dia. Dia. mm mm

90 90

88 88

194106 194107

70 95

88 110

Inside Dia. mm

Intrusion

67 93

43 100

Drink Holders - Plastic

Drink Holders - Adjustable

Mounts onto any flat vertical surface. When not in use the unit folds down to protrude only 24mm. Fold out the retainers to hold glasses up to 75mm in diameter. Moulded in tough U.V. stabilised plastic.

Coil spring loaded adjustable retainer arms, holds drinks from 70mm to 85mm diameter. Mounts on any flat vertical surface. Folds flat to protrude just 24mm. Moulded from U.V. stabilised plastic.

BLA Colour Code 194110 Black 194112 White

Size Folded mm

Size Open mm

- Stainless Steel

Manufactured from pressed stainless steel. Flush mounts into any horizontal surface. 194107 is fitted with a hose tail in the base that accepts 6mm ID hose so spills, spray or rain is drained away.

Recessed Drink Holders

BLA Colour Cut Out Outside Code Dia. Dia. mm mm

193760

O/all Length mm

Mount Screws mm

BLA Colour Size Code Folded mm

93x98x24 93x98x98 5 c/s 93x98x24 93x98x98 5 c/s

Size Open mm

HULL, DECK & CABIN HARDWARE

Telescopic Hatch Support - Chrome Brass

Mount Screws mm

194114 Black 93x98x24 93x98x98 5 c/s 194116 White 93x98x24 93x98x98 5 c/s

Concealed Drink Holders - Plastic Mounts onto any vertical surface. When not in use this unit can be totally concealed behind a bulkhead or the like. To use, simply swing the drink holder out with your finger. Holds tapered or stepped glasses or cups from 65mm to 83mm in diameter.

BLA Colour Cut Out Face Intrusion Mount Code Dim. Screws mm mm mm mm 194122 Black 194124 White

152x40 182x50 152x40 182x50

120 120

4 c/s 4 c/s

www.bla.com.au

355

section

HULL, DECK & CABIN HARDWARE

Recessed Deck Filler Panel - plastic

Recessed Drink Holder - ABS Plastic

Moulded recessed panel to adapt deck fillers to fit into vertical panels. Will accept deck fillers with a maximum base diameter of 70mm. White, U.V. resistant ABS plastic.

Moulded in U.V. stabilised, white ABS plastic. Recessed box with removable drink holders in base to prevent drinks from falling. Ideal for sailing boats. Holds drinks up to 90mm diameter.

BLA Code

194100 310x230 278x195 BLA Height Width Intrusion Code mm mm mm 192382

203

178

Mount Screws mm 4 r/h

Pocket Storage Box

135

Glove Boxes - Plastic Box and door are constructed of durable, U.V. stable plastic. Available with black or beige door. Door opens on a stainless steel hinge pin and has a key lockable press button, cast zinc alloy latch. Two keys included.

Versatile white ABS moulded storage box for consoles, etc.

BLA Code

Face Cut Out Intrusion Mount Size Screws mm mm mm mm

194068 240x140 207x107

100

5 c/s

BLA Door Code Colour

Door Cut Out Intrusion Mount Size Screws mm mm mm mm

194070 Black 350x139 303x107 194071 Beige 350x139 303x107

Glove Box with Drink Holders

194073 Replacement lock and key

Contoured shape moulded from U.V. stabilised plastic. Incorporated in the lid are two pop out drink holders. Stainless steel and cast zinc alloy, thumb press lock supplied with two keys. Holds drinks up to 90mm diameter.

Glove Box

BLA Code

Door Cut Out Intrusion Mount Size Screws mm mm mm mm

194072 340x132 300x100

356

Face Cut Out Intrusion Size mm mm mm

155

5 c/s

168 168

4 r/h 4 r/h

Moulded from U.V. stabilised black plastic. Rounded door for original equipment aesthetics with no sharp edges to catch clothing or crew. Key lockable door, supplied with two keys. Stainless steel lock shell, cast zinc alloy lock mechanism.

Door Cut Out Intrusion Mount Size Screws mm mm mm mm

194077 340x132 300x100

155

5 c/s

194073 Replacement lock and key

Ski Mirror - Chromed

Ski Mirror

Shatterproof chrome plated cast zinc alloy constructed convex lens, provides wide angled rear viewing. Mirror can be mounted to either the dash or to top of the windscreen. Allen key locking multi position adjustment allen key included.

Large convex lens for maximum vision. U.V. stabilised plastic encased glass mirror. Chrome plated cast zinc alloy universal mount bracket suits dash, overhead and windscreen frame mounting.

BLA Width Height Code mm mm

Mount Base mm

Mount Screws mm

194190

23x70

5 c/s

183

Quality marine equipment

BLA Width Height Code mm mm

Mount Base mm

Mount Screws mm

194192

23x70

6 c/s

303

103

section

Transom Step

BLA Length Depth Height Code mm mm mm 165

Step Tread

Portable boarding ladders which can be hooked over a rail, gunwale or transom. Adjustable stand-offs and white vinyl coated swivelling hooks protect the boat from damage. Will fit over gunwales up to 200mm wide. Aluminium and white moulded polypropylene construction. Available in three step or four step.

Mount Holes mm 6 r/h

- Chrome Plated Brass

Combines attractive style with positive grip. Chrome plated brass frame with a soft black PVC tread insert. Sold as a pair.

BLA Steps O/all Code Height mm 194200 194202

185

890 1130

375 375

Telescopic Boarding Ladders - Stainless Steel

BLA Length Width Protrusion Mount Code Screws mm mm mm mm 401904

3 4

O/all Width mm

Two or three step, fold down telescopic boarding ladder designed for mounting on horizontal surfaces such as duckboards or pontoons. Highly polished fabricated stainless steel construction.

4 c/s

Telescopic Boarding Ladder Two stage, two step telescopic boarding ladder designed for mounting under a duckboard or marlin board. Manufactured from 304 grade stainless steel. Velcro mounting strap to hold in the retracted position.

Retracted

Extended

BLA Length Length Width Mount Steps Code Extended Retracted Screws mm mm mm mm 194210

590

Extended

343

315

6 r/h

BLA Steps Extended Code Length mm 194218 194220

2 3

Retracted Width Mount Length Screws mm mm mm

590 875

340 370

Telescopic Boarding Ladder

Folding Telescopic Ladder

Stainless steel boarding ladder designed to mount horizontally under a duck board or marlin board. Three grooved nylon step treads offer non slip traction when wet. Supplied with velcro belt to retain ladder while not in use.

A three step ladder that folds and telescopes. 316 stainless steel throughout. Step rungs are pressed oval for comfort and are fitted with anti-slip. Pivoting mount brackets provide easy installation. 10ยบ to transom.

BLA Length Length Width Mount Code Extended Retracted Screws mm mm mm mm 194232

890

375

305

6 r/h

290 290

5 c/s 5 c/s

Retracted

Extended

Retracted

HULL, DECK & CABIN HARDWARE

Black nylon transom step. Non-skid pattern on top and front face. May also be used as a hand grip.

194196

Boarding Ladders

- Nylon

Steps

BLA Length Length Width Protrusion Mount Steps Code Extended Retracted Screws mm mm mm mm mm 194260

910

450

243

200

6 r/h

www.bla.com.au

357

section

HULL, DECK & CABIN HARDWARE

Edge Trims - Aluminium Core Edge trim comprises of a textured PVC vinyl extrusion cover and a segmented non-corrosive aluminium core. This enables the edge trim to be used on almost any radius. Edge trim can be cut with a sharp knife to the desired length and then simply pushed onto the edge that requires trimming. Available in black and white soft-tone finish. BLA Code per roll per metre (A) 194500 (A) 194502 (B) 194504 (B) 194506 (C) 194508 (C) 194510 (D) 194512 (D) 194514 (E) 194516 (E) 194518

Roll Colour Length m

194501 194503 194505 194507 194509 194511 194513 194515 194517 194519

152 152 122 122 122 122 76 76 46 46

Black White Black White Black White Black White Black White

11.4 11.4 12.8 12.8 13.2 13.2 16.8 16.8 17.0 17.0

7.1 7.1 9.9 9.9 9.9 9.9 12.8 12.8 18.4 18.4

0.8 0.8 1.6 1.6 3.2 3.2 6.4 6.4 12.7 12.7

b c

(C)

(B)

(D)

(E)

b c c

a a

N.B. Not to scale

Canopy Bow Ends - Nylon & Stainless Steel Designed to fit internally into most popular tube sizes. Available in black or white nylon and stainless steel. Tube Wall Thickness mm g

mm mm

195002 195003 195004 195005 195006 195014 195015 195016

1.6 1.6 1.6 1.6 3.0 3.0 16 1.6 16 1.6 16

16.6 16.6 21.8 21.8 19.0 18.6 21.8 28.4

7 7 6.5 6.5 6.5 6.5 8 8

Black nylon White nylon Black nylon White nylon Black nylon Stainless Steel Stainless Steel Stainless Steel

20 20 25 25 25 25 7/8 25 1 32 1¼

BLA Material Tube Code O.D. mm in

7 7 7 7 7 7 7 7

b c

195005

N.B. Italic indicates sizing to suit S/S imperial tube.

Canopy Bow Knuckles

U.V. stabilised marine grade blue vinyl. Supplied complete with alloy bows, deck mounts, four saddles, mount fastenings and four adjustable straps. 1.1 metre high.

Available in black or white nylon, or 316 stainless steel. Sized to fit all popular tubing.

- Stainless & Nylon

BLA Colour Tube O.D. Screw c Code in mm mmø mm 195022 Black ¾ 20 6 8 195023 White ¾ 20 6 8 7/8 22 195024 Black 6 8 195025 White 1 25 6 8 195026 Black 1 25 6 8

195028/37

Canopy Bow Ends - External

Stainless Steel

Manufactured from stainless steel. Sized to fit externally onto popular canopy size tubing. Cast 316 grade stainless steel with highly polished finish.

BLA Tube O.D. Screw c Code in mm mmø mm

BLA Code

Tube O.D. b in mm mm

195017 7/8 195018 1 195019 1 195021 11/4

22 25 25 32

c mm

7 6.5 8 7

7 7 7 6.5

195035 195028 195030 195037

7/8

22 1 25 1 25 1¼ 32

6 6 8 8

c b

195031

Stainless Steel Split Open

Adaptor Sleeve - Nylon Moulded in black nylon, this sleeve enables a 195006 and 195014 bow end to fit 1" x 16g imperial stainless steel tube.

BLA Code

195080

Inside Outside Length Dia. Dia. mm mm mm 19

22.2

Quality marine equipment

195030

7.5 8 12 8

Enables fitting to existing canopy tubes without dismantling or removal of end fittings.

BLA Code

195022

Boat Length Beam m m

194580 1.3 - 1.6 165 194586 1.6 - 1.9 176

195014

195002

Bimini Tops

BLA Code

358

(A)

Tube O.D. QR b c in mm mmø mm

195027 7/8 22 195029 1 25 195031 7/8 22 195033 1 25

Yes Yes No No

6 6 6 6

8 8 8 8

195027

section

Canopy Side Mounts

Moulded in white and black nylon, or cast in 316 stainless steel. Available in fixed mount, pivot and quick release options.

Fitted in conjunction with canopy bow ends for mounting of canopy to vertical and near vertical surfaces such as coaming sides. Moulded in black nylon or cast 316 stainless steel. 195062 has a stainless steel nut insert for additional thread security.

Nylon - Fixed 195040 and 195041 mount canopies at 90º to deck, however the inherent flex properties of nylon compensates for installations of up to 10º off square. 195042 and it incorporates a stainless steel nut insert for additional thread security. BLA Colour Code

Base Height Dim. mm mm

195040 Black 195041 White 195042 Black

55x20 55x20 58x19

195042

b 195060

b c dia. mm mm

23 23 32

6 6 6

8 8 8

Mount Screws mm 4 c/s 4 c/s 5 c/s

Nylon - Pivot

Base Height Dim. mm mm

195048 63x20

b c Dia. mm mm

Mount Screws mm

6 c/s

195054

60x19 60x19 62x18 57x20 62x25

36 36 36 36 39

6 6 6 6 8

8 8 7 7 8

Stainless Steel - Pivot Connects canopy to any camber of deck, can even be side mounted. Friction pad in base to prevent rattle. Base Height Dim. mm mm

195059 69x25

6 c/s

Base Height b Mount Dim. Screws mm mm mm mm 32

6 6 6 6 8

3 3 5 6 6

c/s c/s c/s c/s c/s

Lock Length Pin mm mm Yes No Yes

79 75 75

Mount Screws mm

195076

5 5 5 5 6

c/s c/s c/s c/s c/s

Canopy Bow Joiners Available in black nylon or aluminium. BLA Material Code

Suits Tube Length mm O.D. wall mm

195100 Nylon 195110 Alloy 195112 Alloy 195114 Alloy

20x1.6 20x1.6 22x1.6 25x3.0 25x1.6

73 106 114 114 114

195100

195110

Available as either a straight strap buckle or with a 'D' loop for a combination of strap attachment and adjustment. Moulded in black nylon. 195182

5 c/s

Strap mm

Length mm

195180 Strap Buckle 25 195182 'D' end Buckle 25

Used in conjunction with canopy bow ends. Concave base for connection to 20-25mm tube.

195057 57x20

Tube Dia. in mm

BLA Description Code

Canopy Rail Mount

BLA Code

28 28 31 31 31

Canopy Strap Buckles - Nylon

b c Mount Dia. Screws mm mm mm

Black Nylon 43 Black Nylon 43 Stainless Steel 51x23 Stainless Steel 72x47 Stainless Steel 72x47

195056

BLA Mount Quick Base Height b c Code Release Dim. Dia. mm mm mm mm

BLA Code

195060 195062 195066 195068 195071

Base Protrusion Pivot Mount Dim. Bolt Screws mm mm mm mm

195075 7/8 22 195076 1 25 195077 1 25

195053

Yes Yes No No No

BLA Material Code

BLA Code

Available to connect canopy at 90º to deck or at 10º off square to deck. Quick release option also available.

90º 10º 90º 10º 10º

195068

These tube hinges allow bimini tops and other sun shades to be easily and compactly folded. Cast from 316 stainless steel and mirror polished. Available in locking or non locking versions. The locking version has a pull to release, push to lock detent pin. Commonly used in tensioning extension tubes on strapless canopies. Grub screws secure tube in socket. 195075 & 7

Stainless Steel - Fixed

195051 195053 195054 195056 195055

195066

Tube Hinges

Connects canopy to any camber of deck, can even be side mounted. BLA Code

195062

195041

HULL, DECK & CABIN HARDWARE

Canopy Deck Mounts - Stainless Steel and Nylon

Canopy Strap Buckle

26 54

195180

- Stainless Steel

Stainless steel canopy strap buckle to suit 25mm webbing. BLA Code 195184

www.bla.com.au

359

section

HULL, DECK & CABIN HARDWARE

Canopy Tube Clamps - Nylon

Bimini Supports

Moulded in black nylon with stainless steel threaded thumb screw. Fits 22mm outside diameter tube.

Can be used to accept bow ends for canopy covers on inflatable's or small boats. When the covers are removed the StarPort receptor can be re-used for mounting such things as a rod holder or new accessory. Sold as a pair.

BLA Code

Description

BLA Code

Colour

195120 195122

Complete clamp Thumb screw only

195750 195752

Black White

Canopy Tube End Clamp - Nylon

Canopy Key Lock Strap Fittings

One end snaps around a tube and the other end inserts into a tube. Moulded in black nylon.

Buckle

BLA Code 195130

Tube Size mm O.D. wall 20x1.6

Canopy Tube Ends 'T' - Nylon Used to clamp tubes at right angles. One end fits to side of tube and is through bolted, while the other end fits internally in second tube. Internal hex socket accepts nut measuring 10-11mm across the flat. Moulded in black nylon. BLA Code 195134 195136

Tube Size mm O.D. wall

BLA Face Code mm

Mount Intrusion Mount Hole Screws mm mm mm 13

5 c/s

Key Lock Ring a

Plugs tube end and provides attachment post which fits into 195160. Moulded in black nylon.

195150

Flush fitting key lock socket as supplied with 195187 above and 195189 below. Available as a separate fitting for when multiple mount positions are required. All 316 stainless steel construction.

195188 45x23

25x1.6 25x3.0

Tube End Post - Nylon

BLA Code

Socket

25x1.6 25x3.0

Canopy Tube End Caps - Nylon

195140 195142

BLA Strap Max. Code mm 195187

Tube Size mm O.D. wall

Fits internally to plug tube end. Hex centre accepts nut measuring 10-11mm across the flat. Moulded in black nylon. BLA Code

This fitting combines a self locking cam buckle with a twist lock mount post and flush deck socket. To remove canopy strap, press the buckle cam lever to release strap tension, rotate the buckle 90ยบ and lift buckle out from deck socket. When buckle is removed the deck fitting protrudes only 3mm. A key arrangement in the socket locks strap fittings in socket, unless they are turned side on to normal angle of pull. All 316 stainless steel construction.

Tube Size mm O.D. wall

Length

20x1.6

Provides a removable attachment point for canopy straps. Includes keyed removable ring and flush deck socket. To remove, turn ring sideways to base plate and lift out, eye remains locked in at any other position. All 316 stainless steel construction.

BLA Code 195189

Ring I.D. mm

Protrusion

Mount Bracket - Nylon

360

Used in conjunction with 195150 to mount canopy tubes. Also commonly used in utilities and RVs for torneau cover support rods. Moulded in black nylon.

Tube End - Nylon

BLA Width Height Depth Mount Code Screws mm mm mm mm

BLA Code

195160

195170

Quality marine equipment

Internally fitted tube end that facilitates the mounting of a length of tube to deck or coaming. Two required per tube. Moulded in black nylon.

5 r/h

Tube Size Height mm O.D. wall mm 20x1.6

Mount Mount Base Screws mm mm 20x20

3 c/s

section

Canopy Strap Snap Hook Suits webbing up to 25mm. Solid 316 stainless steel construction.

• Greater contact area with the fabric reduces the risk of damage to the fabric and tear out.

• Brass crimp on the shock cord resists corrosion.

25x5

• Fitting can be removed and be refitted with new shock cord without damage to the fabric.

Canopy Strap Hook

BLA Colour O/All Cord Cap Fabric Code Length Dia. Hole mm mm mm mm

Stainless steel canopy hook, to suit 25mm webbing. BLA Length Width Strap Code Max mm mm mm

195196 Black 195197 White

195186

Utility Stretch Loops - Nylon

25x5

Used to hook shock cord or 195182 canopy strap buckle on to flat horizontal surfaces. Moulded in black nylon. Accepts up to 8mm shock cord.

BLA Width Height Depth Mount Code Screws mm mm mm mm 26

3 c/s

18 18 18 18 16 16 16 16

195194

Cord Mount Dia. Screws mm mm 5 5 8

4 r/h 4 r/h 4 r/h

195192

195202

195200

195209

Cord Outside Protrusion Mount Dia. Dia. Screw mm mm mm mm

Black Nylon Black Nylon White Nylon Stainless Steel

5 8 5 8

16 18 17 19

11 15 13 13

4 c/s 4 c/s 4 r/h 4 c/s

Cap

Tube Holders - White Nylon Stud

Flat Base

Tube Base

BLA Description Colour Dia. Height Mount Code Hole mm mm mm White Black White Black White Black White Black

90 90 140

195200 195202 195204 195209

4 c/s

Comprising of a cap, stud and socket. The new Stayput press clip is the corrosion free alternative to conventional metal press studs. Designed primarily for marine applications where fabric covers need to be attached to a solid surface. Manufactured from U.V. stable nylon/acetal. Fabric fittings simply press together. Bases are available to suit installation on a flat surface or a curved base is available for secure fixing to 25mm tube. Sold in packs of 25.

Cap Cap Stud Stud Flat Base Flat Base Tube Base Tube Base

195190 Black 195192 White 195194 Black

BLA Colour Code

Press Clips

195320 195322 195324 195326 195328 195330 195332 195334

O/all length mm

195204

BLA Width Height Depth Mount Code Screws mm mm mm mm 25

BLA Colour Code

Attachment buttons for use with canopy stretch loops. Moulded in U.V. stabilised nylon or 316 stainless steel.

Used to hook shock cord or canopy strap end buckle on to flat vertical surfaces. Moulded in black nylon. Accepts up to 8mm shock cord.

30øx13 6.5 30øx13 6.5

Shock Cord Buttons

Lashing Hook - Nylon

195210

5 5

Moulded nylon head fitting with shock cord loop for tensioning canopies and covers as well as securing ice box lids, etc.

Canopy Strap Mount Hook - Nylon

195212

90 90

HULL, DECK & CABIN HARDWARE

Simple installation to varying thickness of fabric without the need for special tools. The unique Stayput design has several benefits;

BLA Length Width Strap Code Max mm mm mm 195185

Shock Cord Loops

4 4 6 6 7 7 7 7

5 5 5 5 3 c/s 3 c/s 3 c/s 3 c/s

Handy nylon clips to store oars, paddles, boat hooks, etc. BLA Tube Code Dia. mm in

Mount Mount Base Screws mm mm

193806 193808 193812 193816 193818

21x27 23x17 29x18 34x18 39x23

19 ¾ 25 1 32 1¼ 38 1½ 45 1¾

3 r/h 3 c/s 3 c/s 3 c/s 4 c/s

Tube Holders Versatile black nylon snap in holders. Secures oars, paddles, boat hooks, plumbing, etc. Large bearing surface reduces scuffing. Sold as a card of 12 pairs. BLA Code

Tube Dia. mm

193824 193826

25-35 40-50

www.bla.com.au

361

section

HULL, DECK & CABIN HARDWARE

Canvas to Canvas Stayput Fasteners

Weld On Rail Bases

Same moulded nylon/ acetal spring free, no pressure for closure design as regular Stayput fasteners, but configured to connect fabric to fabric, such as vinyl bimini to clears. Sold in packs of 25.

All bases are manufactured from 3mm thick, grade 316 stainless steel and are pre polished. A time and cost effective option for fabricating pushpits, pulpits, stanchions and hand rails.

BLA Colour Eyelets Mount Eyelet Code O.D. I.D. mm mm 195312 195313 195314 195315

White Black White Black

Single Single Double Double

22 22 22 22

Centre bolt to be welded in place before tube is welded. Provides neat concealed fastening installation.

9 9 9 9

195314

Stayput Fasteners

Vertical

White Black White Black White Black White Black

35x16 35x16 35x16 35x16 35x16 35x16 35x16 35x16

9 9 9 9 9 9 9 9

3 3 3 3 3 3 3 3

c/s c/s c/s c/s c/s c/s c/s c/s

8 r/h 8 r/h 8 r/h

32 38 50

60 74

Mount Screws mm 6 r/h 6 r/h

Oval bases BLA Base Mount Code Screws mm mm 196114 76x31

6 r/h

Rectangular bases BLA Base Mount Code Screws mm mm 196118 80x45

6 r/h

Round bases with socket

Stayput Curved Base Provides neat and secure fit when installing Stayput fasteners to 20-25mm tube. Commonly used for biminis and rails. U.V. stablilised black nylon. Sold in packs of 25.

BLA Tube Tube Base Mount Code Angle Size Dia. Screws mm mm mm

Round 196132 Bases 45º 22 - With 69 Socket 6 c/s

BLA Base Mount Code Screws mm mm

196134 196136 196150 196152 196154

195319 35x16

Rectangular bases

3 c/s

Moulded in tough U.V. stabilised nylon.

22 22 25 25 25

69 69 74 74 74

6 6 6 6 6

c/s c/s c/s c/s c/s

BLA Tube Tube Base Mount Code Angle Size Screws mm mm mm 195240

BLA Type Colour Base Code mm 195230 Eye 195232 Eye 195240 Hook

60º 90º 45º 60º 90º

- with socket

Lashing Eye/Hook

195230

Max Mount Rope Screws mm mm

White 34x22 Black 34x22 White 34x22

10 10 10

Lashing Eye/Hook

3 c/s 3 c/s 3 c/s

196170 196172 196174 196190 196192 196194

45º 60º 90º 45º 60º 90º

22 22 22 25 25 25

80x44 80x44 80x44 80x44 80x44 80x44

6 6 6 6 6 6

c/s c/s c/s c/s c/s c/s

Boat Rego Letters and Numbers Self adhesive, popular square font, matt finish. Sold as pairs. Minimum pack quantity - five pairs.

195224

Cast stainless steel construction for strength and durability.

BLA Colour Size Code mm in

BLA Type Code

196000( 196020( 196040( 196030(

Base Height Max Mount Size Rope Screws mm mm mm mm

195222 Hook 27x27 195224 Eye 33x27

362

196102 196104 196106

196108 196110

BLA Mount Eyelets Colour Base Eyelet Mount Code I.D. Hole mm mm mm Single Single Double Double Single Single Double Double

Bolt Hole mm

BLA Dia. Code mm

Horizontal

Horizontal Horizontal Horizontal Horizontal Vertical Vertical Vertical Vertical

BLA Dia. Code mm

Round bases - external fastening

A time proven canopy fastening system, moulded from high quality U.V. stable nylon, producing corrosion free operation. No spring and no need for pressure for closure design.195319 adaptor available to mount on tube. Sold in packs of 25.

195302 195303 195304 195305 195306 195307 195308 195309

Round bases - internal bolt

19 21

Quality marine equipment

6 8

3 c/s 3 c/s

195222

) ) ) )*

Black Black Black Black/White

203 150 100 150

8 6 4 6

REGO NUMBERS

N.B. Last digit of the BLA code refers to the letter or number required (e.g. 196000A) *For WA only