Section 20 - Outboard, Fuel, Fittings & Propellers by BLA

section

Outboard & Diesel Fuel Tanks Plastic Jerry Cans Outboard Fuel Fittings & Primer Bulbs Funnels & Siphons Fuel Lines & Fuel Hose Sierra Outboard Fuel Fittings Fuel Filters & Elements Oil Filters & Wrenches Fuel Tank Breathers & Valves Outboard Brackets Outboard Plates, Pads & Motor Locks Motor Trolleys, Dinghy Wheels & Tinnie Mover Outboard Foils Flushers, Motor Starter Cord & Spark Plugs Sierra Impellers & Water Pump Repair Kits Seloc Engine Manuals Turning Point Propellers

364 364 365-366 366 366-368 368-371 372-377 378-379 380-381 382 383 384-385 385-386 386-387 388-407 408 409-432

www.bla.com.au

Outboard, Fuel Fittings & PROPELLERS

Outboard, Fuel Fittings & Propellers

363

section

Outboard, Fuel Fittings & PROPELLERS

Fuel Tank Polyethylene - 11.3 Litres Moulded in U.V. stabilised polyethylene, this 11.3lt fuel tank meets ISO13591 standards. Supplied with vented filler cap and 1/4" internal threaded fuel tank pick-up.

Fuel Tank - 22.7 Litres Moulded in U.V. stabilised polyethylene, this 22.7 litre fuel tank has a direct reading fuel gauge incorporated in the cap, and for easy carrying incorporates a handle at one end. Supplied complete with fuel tank pickup with 1/4" BSP internal thread. Fuel tank adaptors are sold separately. Adaptors must be ordered separately to suit the outboard make and are listed on the following pages.

BLA Code

200106

Height mm 240

Width Length mm mm 255

200110

350

Warning

235

Width Length mm mm 290

590

Warning

N.B. There is always an element of risk when carrying fuel. Caution should be exercised when using this equipment.

Jerry Can Australian made, moulded polyethylene fuel containers, compliant to AS/NZS 2906:2000. Rippled non-skid finish with moulded carry handle, bottom hand grip, flexible spout and screw on vent cap to provide ease of pouring. Versatile cap arrangement stores the spout inside the container when not in use.

BLA Colour Capacity Length Width Height Code litre mm mm mm 200346 Red 200348 Yellow

20 20

350 350

170 170

470 470

Warning

N.B. There is always an element of risk when carrying fuel. Caution should be exercised when using this equipment.

Diesel Fuel Tanks

- 60 & 120 Litres Roto moulded in polypropylene with a minimum wall thickness of 5mm, these tanks provide a multitude of inlet and outlet connection port directions. Each tank has nine, 11/2" BSP (38mm) threaded inserts to allow quick and easy attachment of inlet/ outlets and breathers to suit individual arrangements. Use reducing bushes for smaller thread sizes if required. Refer pages 208-209 for hose tail and bush options.

BLA Capacity Length Code l gal mm 200124 60 13.1 200126 120 26.3

400 800

Warning

Width mm

Height mm

400 400

N.B. There is always an element of risk when carrying fuel. Caution should be exercised when using this equipment.

364

Height mm

Quality marine equipment

section section

Fuel Tank Adaptors

21 20

Fuel Line Fittings

Two pin, brass tank adaptors. 1/4" NPT thread.

Two pin quick connect, black plastic fuel line fittings.

200318

7.5 200142

8 8 6

200330 6

200144

200332

200132 7.5

BLA Code

Suits 8

200132 Evinrude®/Johnson® 200142 Yamaha®, Mercury® & Mariner® (88 - 98) 200144 Mercury® (99 on)

200331

BLA Suits Code 200318 200330 200331 200332

Fuel Tank Adaptors Chrome plated brass tank adaptors. 1/4" NPT thread.

Hose Size mm

Evinrude®/Johnson® Yamaha®/Mercury® & Mariner®, (88-98) tank end & all motor end Mercury® (99 on) tank end Honda to date, motor end

8 8-10 8 8

Fuel Line Fittings 200138

200136

Quick connect, chrome plated brass fuel line fittings.

12.5

200139

200141

200326 200322

BLA Code

Suits

200136 200138 200139 200141

Most Suzuki® (75HP up) Chrysler®, pre 1999 Force®, most Suzuki® (70HP down) Honda® (2001 to date) Tohatsu® & Mercury® International up to 40HP

Fuel Tank Adaptors

200334

200327 12.5

Brass tank adaptors used to directly clamp the fuel hose. 1/4" NPT thread. BLA Suits Code 200322 200326 200327 200334

BLA Hose Code Size mm in 138130 200140

6 1/4 8 5/16

Outboard, Fuel Fittings & PROPELLERS

Hose size mm

Most Suzuki® (75HP up) Chrysler®, Force®, most Suzuki® (70HP down) Honda® Tank End Tohatsu® & Mercury® International (up to 40HP)

8 8 8-10 8-10

Fuel Tank Cap with Gauge Replacement cap with gauge to suit 200110 deluxe fuel tank. BLA Outside Dia. Code mm 200146

210

Length mm 67

www.bla.com.au

365

section

Outboard, Fuel Fittings & PROPELLERS

Fuel Line Fitting

Suits: Mercury®/Mariner®, bayonet style Diecast female bayonet motor end fitting to suit 8-10mm (5/16" - 3/8") ID hose.

Suits: Mercury®/Mariner®, bayonet style Diecast, male bayonet tank end fitting to suit 8-10mm (5/16" - 3/8") ID hose.

BLA Code

200310

200314

Fuel Tank Adaptor

Black Fuel Hose

Suits: Mercury®/Mariner®, bayonet style. Diecast female bayonet tank adaptor. 1/4" NPT thread.

Australian made U.V. stabilised. Suitable for exposed use. Suitable for leaded, unleaded, two stroke, E10 and diesel fuels. Recommended for above floor outboard applications only. Not recommended for use on underfloor tanks. Sold in 33m rolls.

BLA Code 200134

BLA Code

Primer Bulbs

136308 136310

Black, U.V. stabilised fuel primer bulbs. Available in two sizes to fit most fuel lines.

- E10 Resistant

Inside Dia. mm 8 10

Black Reinforced Fuel Hose 200302

BLA Code 200302 200304

Hose Overall Size Length mm mm 8 10

175 195

BLA Code

Premium quality primer bulbs that offer superior resistance to U.V. degradation. Suitable for use with alcohol enhanced fuels. Internal check valves with stainless steel springs and chemically resistant DuPont Vilton® plastic balls that resist sticking.

S18-8002 S18-8004 S18-8005

Hose ID mm 6 8 10

Premium reinforced fuel hose manufactured to SAE J1527 and USCG Type A1 standards. Flame retardant and suitable for fuel feed and vent under floor applications. Suitable for E10, unleaded, two stroke and diesel fuels. Sold in 30m rolls.

200304

Primer Bulbs

BLA Code

- E10 Resistant

136320 136322 136324 136326

Inside Dia. mm 8 10 12 16

Siphon Pump Very handy and economical, squeeze to pump siphon set. 400mm inlet hose and convenient flexible outlet hose, over 500mm long.

3 in 1 Funnel Set Easy to use and store funnel set. Main mouth opening 220 x 140mm with strainer in bottom. Use straight or with angled attachment.

366

BLA Code

200368

200369

Quality marine equipment

Degreaser not included

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Fuel Line

Suits: Mercury®, Mariner®, bayonet style Grey fuel hose. U.V. stabilised primer bulb. Fitted with motor and tank end fittings. 2.1m in length x 8mm ID hose.

Suits: Evinrude®/Johnson® Grey fuel hose. U.V. stabilised primer bulb. Fitted with motor and tank end fittings. 2.1m in length x 8mm ID hose.

BLA Code

200222

200224

Fuel Line

Suits: Suzuki® (most 75Hp and above) Grey fuel hose. U.V. stabilised primer bulb. 2.1m in length x 8mm ID hose. Supplied with motor connection end only.

Suits: Chrysler®, Pre ‘99 Force®,Suzuki® (most 70Hp and below) Grey fuel hose. U.V. stabilised primer bulb. 2.1m in length x 8mm ID hose. Supplied with motor connection end only.

BLA Code

200226

13mm fuel port

200228

6mm fuel port

11mm fuel port

Fuel Line

Suits: Tohatsu® & 2001 to date Mercury® International Grey fuel hose. U.V. stabilised primer bulb. 2.1m in length x 8mm ID hose. Supplied with motor connection end only.

Universal - no fittings supplied Grey fuel hose. U.V. stabilised primer bulb. 2.1m in length x 8mm ID hose.

BLA Code

200229

12.5mm fuel port

200230

Fuel Line

Suits: Yamaha®, Mercury® & Mariner® 88 - 98

Suits: Mercury® & Mariner® 99 to date Grey fuel hose. U.V. stabilised primer bulb. Fitted with motor and tank end fittings. 2.1m in length x 8mm ID hose.

Grey fuel hose. U.V. stabilised primer bulb. Fitted with motor and tank end fittings. 2.1m in length x 8mm ID hose.

BLA Code

BLA Code 200232

8mm fuel port 6mm barb

200233

Outboard, Fuel Fittings & PROPELLERS

Fuel Line

8mm fuel port 6mm barb 8mm fuel port / 7.5mm barb

www.bla.com.au

367

section

Outboard, Fuel Fittings & PROPELLERS

368

Premium Reinforced Fuel Line

Fuel Connector

Black premium reinforced U.V. stabilised fuel hose with primer bulb fitted. 2.1m length, 8mm ID hose.

5/16" Replaces: 22-816856T2 (male) Fits: 100 4-cyl (1988-99), 115 4-cyl (1989 & up), 125 4-cyl (1994 & up), 65 Jet (1994 & up), 90 3-cyl (1987 & up). Mates with S18-80410. BLA Code S18-80412

Tank Connector BLA Code

Size

200240 200242 200244 200246

Evinrude®/Johnson® Universal (no fittings) Yamaha®/Mercury® Mercury®/Mariner® 99 to date

1/4" NPT (female).

MERCURY® / MARINER®

BLA Code S18-8068

Fuel Connector

3/8" Replaces: 30185A3, 30185Q3 (male).

5/16" Replaces: 22831Q3, 22831A3 (female).

BLA Code

S18-8084

S18-8069

Tank Connector

5/16" Replaces: 30185A3, 30185Q3 (male).

1/4" Replaces: 22-1413M, 2214213Q. Mates with S18-8077-1.

BLA Code

S18-8070

S18-8075

Fuel Connector

Replaces: 22-13563Q7, 22-13563T7 (tank end). Mates with S18-80402.

5/16" Mates with S18-8077-1.

BLA Code

S18-8091

S18-8085

Tank Connector

Fuel Connector

1/4" NPT, mates with S18-8091.

3/8" Replaces: 22-13563A3, 22-13563Q3. Mates with S18-8077-1.

BLA Code

S18-80402

S18-8076

Fuel Connector

Tank Connector

5/16"Replaces: 22-13563T3 (female) Fits: 4/5 2-Stroke (1999 & up) (motor end). Mates with S18-80412.

1/4" NPT. Mates with S18-8075, S18-8076, S18-8085.

BLA Code

S18-80410

S18-8077-1

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

Tank Connector

Fuel Connector

1/4" NPT, Mercury® straight fitting (female).

3/8" (female).

BLA Code

S18-8082

S18-8083

TOHATSU®

JOHNSON® / EVINRUDE® Fuel Connector

Tank Connector 1/4" NPT .508 O.D. Nissan tank large inlet. Fits: All models. Mates with S18-8079.

5-16" Replaces: 174508, 775640. Mates with S18-8063.

BLA Code

S18-8078

S18-8056

Fuel Connector

Tank Connector

Large inlet. (Female) Replaces: 3B2-70281-0. Fits: All models. Mates with S18-8078.

1/4" NPT Replaces: 502867, 772681. Mates with S18-8092 & S18-8056.

BLA Code

S18-8079

S18-8063

Fuel Connector

Fuel Elbow

(Engine end) Replaces: 3B2-70260-0. 3/8" Hose. Fits: 5-90HP 2-stroke and TLDI models. Mates with S18-8089.

3/8" Barb w/ 3/8" NPT Thread. Replaces: 174177 90˚.

BLA Code

S18-8088

S18-8072

Fuel Connector

(Engine end) Replaces: 3B2-70260-0 (metric threads) 5/16" hose. Fits: 5-90HP 2 stroke and TLDI models. Mates with S18-8088.

3/8" Replaces: 176445, 775641. Mates with S18-8063.

BLA Code

S18-8089

S18-8092

Fuel Connector 5/16" Replaces: 394-70250-0 (female). Fits: 4-30HP 4-stroke. Mates with S18-8417.

YAMAHA® Fuel Tank Elbow

Outboard, Fuel Fittings & PROPELLERS

BLA Code

21 20

Universal fitting with 1/4" NPT threads. Replaces: ABA-FBARB-90-DG (brass).

BLA Code

S18-80410

S18-8040

Fuel Connector

Tank Connector

Replaces: 394-70260-0. Fits: 4-30HP 4-stroke. Mates with S18-80410.

1/4" NPT. Fits: F75-F250 115-300HP. Mates with S18-80413, S18-80414, S18-80415.

BLA Code

S18-80417

S18-8077-1

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

369

section

YAMAHA速 (Cont.)

Outboard, Fuel Fittings & PROPELLERS

Fuel Connector 5/16". Replaces: 6G1-24305-04, 6G1-24305-05-00. Fits: 6(1989, 1992-93), 8(1984-85, 1989-93, 2001-02), 9.9(1984-93, 2000-03), 15(1984-93, 2000-03), 25(1984-85, 1988-93, 2000-03), 50(1986-93, 2000-03), 60(2001-03), 70(1984-86, 1988-90, 1992-93, 2000-03), C25(1991,1993), C30(1991-93), C40(1991-93, C50(200-01), C55(1991-93, C60(2000-01), C70(2000-01), C85(1991-93), C90(2000-01), E48(2000), F60(2002-03), T8(2001-03), F9.9(1985-93, 2001-03), F15(1998-99, 2000-01), F25(1998-99, 2000-03), F30(2001-03), F40(1999, 2000-03), F50(1999, 2000-03), F60(2002 -03), T8(2001-03), T9.9(1991-93, 1999, 2001-03), T25(2001-03), T50(1999, 2000-03), T60(2003).

Fuel Connector 3/8" Replaces: 6Y2-24305-05, 6E5-24305-05. Mates with S18-8077-1.

BLA Code S18-80415

Fuel Connector Replaces: 6Y1-24305-04. Mates with S18-8077-1.

Mates with S18-8077-1.

BLA Code

S18-80414

S18-80413

HONDA速 Tank Connector

Fuel Connector

Replaces: 16977-ZV5-A00. Male tank outlet, new style, 1/4" NPT, nickel plated brass. Male connector, for fuel tank. Mates with S18-80401.

Female 3/8" hose connector with rectangular locking post. Will not interchange with OE's 5/16" hose assemblies. For late model engine: For use with our S18-81042 fuel hose assembly, motor end. Mates with S18-80407.

BLA Code S18-80400 BLA Code

Fuel Connector Female hose connector, new style, 3/8" hose. Will not interchange with OE's 5/16" hose assemblies. Mates with S18-80400, tank outlet.

S18-80403-1

Fuel Connector Replaces: 17650-ZW9-003. Female 5/16" connector with rectangular locking post. Fits: late model engines. Mates with S18-80407.

BLA Code S18-80401

Fuel Connector Replaces: 16977-ZV5-900. Male tank outlet, old style, 1/4" NPT. BLA Code S18-80408 BLA Code

Fuel Connector

S18-80406

Replaces: 17710-ZW9-033 5-16 with interlocking post. Fits: BF8-BF130 (2003). Mates with S18-80403 & S18-80408.

Fuel Connector Replaces: 17650-921-003ZB. Fits: BF5/BF8A 2001 and earlier. Mates with 17710-881-00ZA.

370

BLA Code

S18-80420

S18-80407

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

SUZUKI速 Fuel Connector

1/4" NPT .432 O.D. Replaces: 99105-00192. Fits: DT4-DT65. Mates with S18-8062 (male).

Replaces: 65720-986BO. Fits: DF4-DF140. Mates with S18-80404, S18-80419.

BLA Code

S18-8071

S18-80425

Tank Connector

Fuel Connector

1/4" NPT .508 O.D. Replaces: 65740-9550, 99105-00193. Fits: DT5-DT140. Mates with S18-8709 & S18-80405 (male).

3/8" Fits: DF25-DF140HP. Mates with S18-80425.

BLA Code

S18-8078

S18-80404-1

Fuel Connector

(Tank End) Replaces: 65750-95510, 65750-95500. Fits: DT75-DT140. Mates with S18-8078.

Female to 3/8" hose barb. Mates with S18-8078.

BLA Code

S18-8079

S18-80405

Tank Connector

Fuel Connector

Motor Side. Replaces: 65720-94411. Fits: DT75-DT140. Mates with S18-80418.

Replaces: 65750-98505. Fits: DT4-DT65. For use with S18-8071.

BLA Code

S18-8087

S18-8062

Fuel Connector

Tank Connector

Motor Side. Replaces: 65720-94401. Fits: DT4-DT65. Mates with S18-80418.

1/4" NPT.

BLA Code

S18-80409

S18-8090

Fuel Connector

CHRYSLER速 / FORCE速

Replaces: 65750-94404. Fits: DT4-DT140. Mates with S18-8087, S18-80409.

Fuel Connector

BLA Code

S18-80418

S18-8062

Fuel Connector

Tank Connector

Replaces: 65750-87J10, 6570-87J11. Fits: DF4-DF140 (5/16" version of S18-80404). Mates with S18-80425.

1/4" NPT .432 O.D. Mates with S18-80622 (male).

BLA Code

S18-80419

S18-8071

Outboard, Fuel Fittings & PROPELLERS

Tank Connector

Replaces: 197787-3. Mates with S18-8071.

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

371

section

Outboard, Fuel Fittings & PROPELLERS

Mercury® Fuel Filter

Fuel Filters Spin-on filter removes 98.8% of emulsified water and foreign particles as small as 20 microns. Filter media will not separate two-stroke oil from fuel, making them suitable for pre-mixed fuels. Complete filter assembly includes filter head, disposable filter, two brass tails to suit 8mm hose and 2 x 3/8" NPT plugs. Brass tails to suit 10mm hose are available separately. Available in a choice of configurations to interchange with OEM components. Features: • Cast alloy head • 145mm overall height • 106mm overall width • 106mm overall depth • 8mm mount holes • Two inlets 3/8" NPT • Two outlets 3/8" NPT

BLA Code

BLA Description Code

Element included

200389 Complete filter assembly 200392 200390 Complete filter assembly 200394 200392 Filter only (replaces John/Evin OEM 502925) 200394 Filter only (replaces Merc 35-60494-1 & 35 807172) 138148 Brass tail to suit 10mm hose, 3/8" NPT

Delphi ‘CAV’ Fuel Filter An agglomerator filter which offers efficient fuel filtration via a paper filter element. Water is collected in a clear glass base and drained via a screw in plug, without having to dismantle the unit. Base and head are cast aluminium. Suitable for diesel fuel only with standard element. Features: • 10mm fastening holes • 197mm overall height • 107mm maximum width • 45l/hr flow rate • Inlet/outlet 1/2" x 20 UNF

200395 200394 Filter only (replaces Merc 35-60494-1 & 35 807172) 138148 Brass tail to suit 10mm hose, 3/8" NPT S18-8109 Brass tail to suit 8mm hose, 3/8" NPT

Delphi ‘CAV’ Sediment Filter Watertrap or sedimenter which removes water and large particles from fuel. Glass bowl for quick visual inspection of fuel condition. Typically abrasive particles of 100 microns and water particles of up to 300 micron size can be filtered. Up to 150CC of water can be collected in the bowl and drained without dismantling. Base and head constructed of aluminium. This filter has no gauze or paper element and is suitable for petrol, including two-stroke and diesel. Features: • 10mm fastening holes • 172mm overall height • 107mm maximum width • 45l/hr flow rate • Inlet/outlet 1/2" x 20 UNF

Head configuration Two blanking plugs supplied. Head configuration Two blanking plugs supplied.

BLA Code

Description

200402 Complete filter assembly 200412 Replacement glass bowl 200414 Replacement drain plug 200416 Replacement 'O' ring 200418 Replacement element diesel only 200419 Ryco element 2 & 4 stroke fuel

Delphi ‘CAV’ Hose Tails Brass hose tails to suit inlet/outlet on CAV filters. 1/2" x 20 UNF thread. Seals on seat, not on threads. BLA Suits Code ID Hose mm in 200420 200422 200424

372

- Stainless Steel Head Spin-on filter removes 98.8% of emulsified water and foreign particles as small as 20 microns. Filter media will not separate two-stroke oil from fuel, making them suitable for pre-mixed fuels. Brass tails to suit 8mm or 10mm fuel hose are available separately. Features: • Stainless steel head • 145mm overall height • 110mm overall width • 106mm overall depth • 8mm mount holes • Two inlets 3/8" NPT • Two outlets 3/8" NPT

6 1/4 8 5/16 10 3/8

Quality marine equipment

Description

200404 Complete filter assembly 200412 Replacement glass bowl 200414 Replacement drain plug 200416 Replacement ‘O’ ring

Ryco Petrol Filter The CAV FAS type fuel filters, using the CAV 296 filter cartridge were designed originally to suit either petrol or diesel fuel. The current range of CAV 296 filter cartridges now available are for diesel fuels only. This Ryco petrol filter cartridge suits the CAV FAS type diesel fuel filter, replacing the CAV 296 cartridge, converting it to suit petrol. This filter is suitable for straight petrol and pre mixed two stroke fuels, where the oil is pre mixed with the petrol. BLA Code 200419

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

Fuel Filters -

with Clear Bowl

BLA Description Code

Head Type

Element Included

200470 Complete Filter Assembly 200474 Complete Filter Assembly

Alloy S/S

200478 200478

200478 200482 200486 200488

Filter only (short) Clear bowl only Cast alloy head only Cast stainless steel head only

Sediment Filter

200426

110

200472 Complete Filter Assembly 200476 Complete Filter Assembly

Alloy S/S

200480 200480

Filter only (long) Clear bowl only Cast alloy head only Cast stainless steel head only

BLA Code

6 r/h

Fuel Filters

- In-line Plastic A clear vial displays any contaminants trapped in these in-line fuel filters allowing immediate inspection of fuel condition. Tapping the filter can dislodge any fine particles that may be embedded in the filter which otherwise may not be visible.

200430 200432 Refill pack of three filter elements

Fuel Filters

- In-line Metal

Disposable fuel filters with zinc plated steel casing. Supplied complete with hose clamps. Suitable as replacement units for OEM equipment. 49

101

BLA Hose Size Code mm

N.B. Not for use on inboard engines. Not for use with pre-mixed 2 stroke fuel.

Element Included

Compact, easy to install, in-line fuel filter for outboard engines. Chrome plated brass ends with a clear viewing barrel, for quick easy inspection of the element, which can be removed for cleaning. Supplied with hose tails suitable for use with 6mm (1/4"), 8mm (5/16") or 10mm (3/8") fuel line.

138132 Brass tail to suit 8mm hose, 1/8" BSP

200434 6/8mm 200436 10mm

Head Type

Outboard Fuel Filter

Hose Height Width Mount Size Holes mm mm mm mm 8

BLA Description Code

200480 200482 200486 200488

Compact sediment filter with cast gunmetal top and easy to see glass bowl. Simple to drain. Suits petrol motors up to 70Hp. Complete with stainless steel bulkhead mount bracket and 2 of 1/8" BSP x 8mm hose tails.

BLA Code

Complete fuel filter and water separating assembly with long filter producing a flow rate of 90 US GPH at 10 micron filtration, to meet the requirements of Yamaha速 Motor Corporation for outboard engine applications. Assembly includes a choice of cast alloy or cast stainless steel filter head, replaceable long filter element, clear bowl drained via a screw in plug, two brass tails to suit 8mm hose and two 3/8" NPT brass plugs. Brass tails to suit 10mm hose are optional. Two each inlet and two outlet ports have 3/8" NPT internal threads. Head is configured to interchange with Yamaha速 OEM components. Filter element is configured to accept the 200482 clear bowl. 275mm high x 106mm wide. 8mm mount holes.

Outboard, Fuel Fittings & PROPELLERS

Complete fuel filter and water separating assembly, includes a choice of cast alloy or cast stainless steel filter head, replaceable filter element, clear bowl drained via a screw in plug, two brass tails to suit 8mm hose and two 3/8" NPT brass plugs. Head is configured to interchange with Mercury速 OEM components. Filter element is configured to accept the 200482 clear bowl. Brass tails to suit 10mm hose are optional. Two each inlet and two outlet ports have 3/8" NPT internal threads. 230mm high x 106mm wide. 8mm mount holes.

21 20

Long with Clear Bowl

BLA Hose mm in Code 200434

S18-7856-1 S18-7857-1

Replaces OEM

8 5/16 A.C. Delco GF-61 10 3/8 A.C. Delco GF-61P

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

373

section

Mercury®/Mariner®/Tohatsu® Fuel Filter - In-line Plastic

Fuel Filters & Elements - OEM Replacements

Outboard, Fuel Fittings & PROPELLERS

A range of economical in-line fuel filters, suitable as replacement units for OEM equipment. 22

(A)

Replaces: genuine Mercury® Mariner® 35-16248 and Tohatsu® 369022300M. Suits: Mercury® 4/5hp 2cyl (1999 & up), 4/5/6hp 4 stroke (1999 & up), 8/9.9 4 stroke (2005 & up)

(B)

Tohatsu® 2 stroke, 5hp thru 9.8hp and 4 stroke 4hp – 30hp.

BLA Code 101

S18-7712

BLA Hose Code mm in (A) S18-7828-1 6 1/4 (B) S18-7829 6 1/4 (B) S18-7830 8 5/16 (B) S18-7831 10 3/8

Replaces OEM General purpose (small capacity) Merc 35-16494, 35-816296T, 35-816296Q, 35-816296 Merc 35-16494-1, 35-816296T1, 35-816296-1, 35-816296Q2, John/Evin 398327 John/Evin 398319

Mercury®/Mariner®/Yamaha® Fuel Filter - In-line Plastic

Mercury®/Mariner® Fuel Filter

- In-line Plastic

Replaces: genuine Mercury Mariner 35-877565T1 ®

Suits: 25hp 4-Stroke (1998 & up), 30hp 4-Stroke (1999-01), 30hp 3 cyl 4-Stroke (1999-01), 40hp 4-Stroke (1998-01), 40hp 4_Stroke 4 cyl (2001-02), 40hp Carb 3-cyl 4-Stroke (2002 & up), 50hp 4-Stroke 4 cyl (2001-02), 60hp 4-Stroke 4 cyl (2001-02), 75hp 4-Stroke (2000 & up), 90hp 4-Stroke (2000 & up). BLA Code

Replaces: genuine Mercury® Mariner® 35-80365M Yamaha® 646-24251-02-00.

S18-7714

Suits: Mercury® Mariner® 9.9hp 4-Stroke (1995-98), 15hp 4-Stroke (1998 & Up), Yamaha 6hp (1989, 1992-99), 8hp (1989-99, 2001-02), F4 (1999-02), F9.9hp (1989-95, 1997-99, 2001-02), FT 9.9hp (1988-90).

Mercury® Fuel Filter Element Replaces: genuine Mercury® 35-93568. Suits: Rochester 2 bbl & 4 bbl carburettors.

BLA Code

S18-7713

S18-7717

Suzuki®/Johnson®/Evinrude® Fuel Filter - In-line Plastic

Mercury® Fuel Filter

Replaces: genuine Mercury® 35-879885T.

Replaces: genuine Suzuki 15410-87J10 and Johnson Evinrude® 5032323. ®

Suits: Suzuki® DF25 Thru DF140, Johnson® 25hp 4-Stroke (2004-05), 30hp 4-Stroke (2004-07), 40/60/70 4-Stroke (2002-06), 90/115/140hp 4-Stroke (2003-04,2006), Evinrude® 25/30/40/50/70hp 4-Stroke (2000-01).

Suits: 135/150/175hp 4-Stroke Verado™ (S/N 1B227000 & up), 200/225 4-Stroke Verado™ (S/N OT980000 & up), 250/275hp 4-Stroke Verado™ (S/N OT801000 & up).

BLA Code

S18-7716

S18-7718

Suzuki®/Johnson®/Evinrude® Fuel Filter - In-line Plastic

Honda® Fuel Filter

- In-line Metal

Replaces: genuine Honda 16900-SR3-004 ®

Replaces: genuine Suzuki 15410-98500 & Johnson Evinrude® 5032238. ®

- In-line Plastic

Suits: BF115, BF130,AX, AY,A1: Series #14ZW50E1M.

Suits: Most small Suzuki® outboards, Johnson® 4/5hp (2003-07), 6hp 4-Stroke (2005-07), 10/15hp 4-Stroke (2002-07), 40/50/60/70hp 4-Stroke (2002-06), Evinrude® 40/50hp 4-Stroke (2000-01).

374

BLA Code

S18-7719

S18-7720

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

Mercruiser® Fuel Filter

- In-line Metal

21 20

OMC® Fuel Filter

Replaces: genuine 35-864572.

Replaces: genuine OMC® 173326.

Suits: All MPI & EFI engines W boost pump, 8.1L & 496cid, for 3/8" ID fuel lines.

Suits: 1977-83 fuel system with add on filter kit.

BLA Code

S18-7721

S18-7930

Johnson®/Evinrude® Fuel Filter

- In-line Plastic

Replaces: genuine Johnson/Evinrude 5005266. Suits: E-Tec™ 40hp, 50hp, 60hp, 75hp, 90hp, 115hp, 150hp, 175hp & 200DPL.

Mercury® Yamaha® Fuel Filter Replaces: genuine Mercury® Marine 881540 & Yamaha® 68V-24563-00-00. Suits: 115 EFI (4 stroke), 75HP (4 stroke), 75HP (4 stroke) (Bodensee), 90HP (4 stroke).

BLA Code

S18-7722

S18-7979

Suzuki® Fuel Filter Element

Yamaha® Fuel Filter

Replaces: genuine Suzuki fuel filter assembly 15410-94400. Includes 15430-87D10 element.

Replaces: genuine Yamaha® 6D8-WS24A-00-00 F50-F115 after April 2006.

Suits: Most 2-strokes.

For filter housing marked “6D8” only. BLA Code S18-79799

BLA Code

Yamaha® Fuel Filter

S18-7735

Replaces: genuine Yamaha® 6P3-WS24A-00-00.

Honda® Fuel Filter Replaces: genuine Honda® 16010-ST5-993. Suits: BF115, BF130, AX, AY, A1 Series #14ZW50E1M.

Suits: F150, F200, F225, F250, Z-VZ 150 to 300 hp after April 2006. For filter housing marked “6P3” only. BLA Code S18-79809

BLA Code

Mercury® Fuel Filter

S18-7785

Replaces: genuine Mercury® Marine 35-884380T.

Honda® Fuel Filter Replaces: genuine Honda® 16900-SA5-004.

Suits: All Verados, 90HP (DFI) (3 cyl), 115 DFI (3 cyl) / 200HP (DFI) / 225HP (DFI) (including 3.0L DFI).

Suits: BF35/45AM, BF 40/50A, AW, AX:

BLA Code

Series #14ZV50M BF90, AT, AW, AX, AY, Series#14ZW00E1M.

S18-7981

Universal Fuel Filter

Outboard, Fuel Fittings & PROPELLERS

BLA Code

- In-line Plastic

Suitable for inboards and outboards. Can be used with premix fuels. S18-7723 fits: 1/4" and 5/16" hose. S18-7724 fits: 3/8" and 7/16" hose. BLA Code S18-7786

BLA Code

S18-7723

S18-7723 S18-7724

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

375

section

Outboard, Fuel Fittings & PROPELLERS

Sierra 10 Micron Fuel Filters - c/w Drain Bowls Sierra fuel water separators remove over 98.8% of emulsified water from your petrol. These 10 micron filters are over 90% efficient at removing particles as small as 10 micron. All filters are engineered to flow at 90 GPH for complete efficiency. Sierra’s 10 micron filters are recommended to prevent damage to sensitive inboard, outboard fuel injection systems and 4 stroke outboard motors. All filters are supplied with Viton o'rings, powder coated externally and epoxy coated internally. BLA Code

Kit Includes

S18-7932 S18-7951 S18-7937 S18-7938

1 1 1 1 1 1 1 1 1 1 1 1

x x x x x x x x x x x x

S18-7853-1 Aluminium Head S18-7919 Filter S18-7922 AquaVueTM Clear Bowl S18-7853-1 Aluminium Head S18-7919 Filter S18-7924 Metal Collection Bowl S18-7777 Stainless Steel Head S18-7919 Filter S18-7922 AquaVueTM Clear Bowl S18-7776 Stainless Steel Head S18-7919 Filter S18-7924 Metal Collection Bowl

S18-7932

Sierra 10 Micron Replacement Filter Elements & Bowl Assemblies BLA Code

Description

Kit Includes

S18-7928 Spin-on replacement filter S18-7929 Spin-on replacement filter and Metal collection bowl Mercury®/Yamaha® style S18-7941 Spin-on replacement filter and AquaVueTM clear bowl OMC®/BRP® style S18-7943 Spin-on replacement filter and Metal collection bowl OMC®/BRP® style S18-7969 Spin-on replacement filter and collection bowls for Racor®/Honda® style S18-7994 Spin-on replacement filter and AquaVueTM clear bowl Racor®/Honda® style

1 x S18-7922 AquaVueTM Clear Bowl 1 x S18-7919 10 Micron Filter Replaces Racor® B32013 1 x S18-7924 Metal Collection Bowl 1 x S18-7919 10 Micron Filter Replaces Racor® B32020MAM & Mercury® 35-809100 1 x S18-7922 AquaVueTM Clear Bowl 1 x S18-7920 10 Micron Filter 1 x S18-7924 Metal Collection Bowl 1 x S18-7920 10 Micron Filter 1 x S18-7924 Metal Collection Bowl 1 x S18-7948 10 Micron Filter

S18-7928

1 x S18-7922 AquaVue Clear Bowl 1 x S18-7948 10 Micron Filter S18-7922

Sierra Replacement Bowls BLA Code

Description

Replaces

S18-7922 S18-7924

AquaVueTM Clear Bowl Metal Collection Bowl

Suzuki® 99105-20004-BWL Yamaha® MAR-10171-00-10

S18-7924

Sierra 10 Micron Replacement Filter Elements BLA Code

Replaces

S18-7919 S18-7920 S18-7947 S18-7948 S18-7949

Racor® S3213 Mercury® 25-809097 Yamaha® MAR-24563-03-00 Racor® S3214 BRP® (OMC®) 771839 Racor® S3240 Suzuki® 99105-20006 Honda® 17670-ZW1-030GH Racor® S3227 Honda® 17670-ZW1-0801AH Racor® S3232

Sierra 10 Micron Replacement Filters BLA Code

Description

S18-7944 Short Filter S18-7945 Long Filter S18-7946 Long Filter

376

S18-7951

Quality marine equipment

S18-7920

S18-7919

- t/s Non Drain Bowl Filters

Replaces Mercury® 35-807172 and 35-802893Q Mercury® 35-802893Q Yamaha® ABB-FUELF-1L-TR BRP® (OMC®) 502905 BRP® (OMC®) thread

S18-7945

S18-7946

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Sierra 21 Micron Fuel Filters

An extra long filter element S18-7866 producing a flow rate of 360 LPH (90 US GPH), with 10 micron filtration is also available, to meet the requirements of Yamaha® Motor Corporation for H.P.D.I 2 stroke and 4 stroke outboard engine applications. It can be used with any of the head assemblies listed below. A filter element designed to meet Johnson®/Evinrude® OEM specifications is also available. This filter element S18-7846 does not fit the head brackets below and is suitable for use with Johnson®/ Evinrude® OEM or equivalent heads only.

S18-7852-2

Underside of head assembly S18-7853-1

S18-7776-1

S18-7848-1

S18-7846

S18-7844

BLA Description Code

Head Ports Type NPT

Filter No.x Type

S18-7848-1 Complete filter assembly S18-7848-2 Complete filter kit

Alloy Alloy

1/4" 1/4"

1 x short 2 x short

S18-7852-1 Complete filter assembly S18-7852-2 Complete filter kit

Alloy Alloy

1/4" 1/4"

1 x long 2 x long

S18-7965-1

Alloy

1/4"

1 x extra long

S18-7775-1 Complete filter assembly

Alloy

3/8"

1 x long

S18-7777-1 Complete filter assembly S18-7776-1 Complete filter assembly

S/S S/S

1/4" 3/8"

1 x long 1 x lon

Complete filter assembly (10 micron)

10 Micron S18-7965-1

Outboard, Fuel Fittings & PROPELLERS

Water separating fuel filters by Sierra available in a choice of corrosion resistant cast alloy or cast stainless steel head with 1/4" or 3/8" NPT inlet/outlets and short or long filter elements. Head assemblies are suitable for flow rates up to 500 LPH (125 US GPH) with 3/8" NPT ports and 420 LPH (105 US GPH) with 1/4" NPT ports. Complete assembly includes filter cartridge, filter head and two brass plugs. Kits are also available on the two 1/4" NPT alloy head models which includes a complete assembly and an additional replacement filter. Changeable inlet and outlet direction is accommodated by the multi port head. The head and elements are configured to interchange with Mercury® and Yamaha® OEM components. Filter elements are designed to meet OEM specifications. 21 micron filter element shaped with 70 pleats, provides high capacity 240 LPH (60 US GPH) fuel flow and fine filtration, will not separate oil from fuel and is therefore suitable for pre mix two stroke fuel. Filters are not suitable for diesel fuel. The heavy wall filter canister with epoxy coating inside and powder coating outside offers superior protection against corrosion.

S18-7775 Cast alloy head only - 3/8" NPT ports S18-7853-1 Cast alloy head only - 1/4" NPT ports S18-7776 Cast stainless steel head only 3/8" NPT ports S18-7777 Cast Stainless steel head only 1/4" NPT Ports S18-7844 S18-7845 S18-7846 S18-7865 S18-7866

Filter Filter Filter Filter Filter

only only only only only

Accessories: S18-4256 Brass S18-4264 Brass S18-8055 Brass S18-8074 Brass S18-8108 Brass S18-8109 Brass

10 Micron S18-7866

short (replaces Mercury® 35-807172, 35-802893Q) long (replaces Mercury® 35-892893Q, 35-60494-1, 35-807172 & Yamaha® ABA FUELF-1L-TR) (replaces Johnson®/Evinrude® 502905) t/s S18-7965-1 (10 micron) extra long (replaces Yamaha® MAR-FUELF-1L-TR) (10 micron)

plug 1/4" NPT plug 3/8" NPT tail, 1/4" NPT, 8mm hose tail, 1/4" NPT, 10mm hose tail, 3/8" NPT, 10mm hose tail, 3/8" NPT, 8mm hose

S18-8108

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

S18-8055

www.bla.com.au

377

section

Sierra Inboard Sterndrive Oil Filters

Outboard, Fuel Fittings & PROPELLERS

Mercruiser速 BLA Code

Model

S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7876 S18-7876 S18-7876 S18-7879 S18-7876 S18-7824 S18-7824 S18-7875 S18-7876 S18-7879 S18-7875 S18-7876 S18-7875 S18-7824 S18-7824 S18-7824 S18-7879 S18-7879 S18-7874 S18-7824 S18-7876 S18-7824 S18-7876 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7876 S18-7876 S18-7876 S18-7876 S18-7824 S18-7824 S18-7876 S18-7824 S18-7824 S18-7824 S18-7875 S18-7876 S18-7824 S18-7824 S18-7824 S18-7824 S18-7829 S18-7829 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824

Vazer 1.6L 2007-UP 1963-66 110 (153 CID) 4 5 1964-82 120 (153 CID) 4 5 1986-86 120 (153 CID) 4 5 1968-82 140 (181 CID) 4 5 1982-86 140 (181 CID) 4 5 150 (230 CID) 1964-66 160 (230 CID) 1967-69 165 (230 CID) 1970-81 185 CID 1985-87 198 GM 1977 224 CID (470) 1976-84 (485) (488) 4 5 224 CID (3.7L, 1985-89 3.7LX, 165, 170, 180, 190) 4 5 225 FORD 3 1973-74 228 GM 1977-84 229 CID 1983-84 1975-76 233 FORD 3 1968-69, 1977 250 GM 4 5 1975-76 255 FORD 3 1978-86 260 GM 4 5 1981-86 260 GM MIE 4 5 260GM MIE & 1987 MCM 4 5 260 CID (175, 1985-98 180, 205, 4.3L/LX, MAG) 4 262 CID (4.3L/LX/ 1999-UP LXH,EFI, MPI, TBI) 4 280 GM 4 5 1975-76 1987-89 320 EFI 4 5 1977-81 330 4 1982-87 330 4 5 1986-87 350 MAG 4 1987-95 350 MAG 4 5 1991-UP 350 MAG SKI 4 5 350 MAG BRAVO 1995-UP MPI & GEN + 1998-UP 350 MAG MPI MIE 1994-97 (GEN+) 350 MAG EFI SKI 1998-UP 350 MAG MPI SKI (GEN +) BLACK SCORPION 1996-UP SKI (GEN+) 350CID 1978-87 370 (454 CID) 4 1980-86 400 (454 CID) 4 1987-89 420 (454 CID) 4 1983-86 440 (454 CID) 4 454 MAG 1986-UP 454 EFI, MAG MPI 1994-UP & Horizin MIE 1983-86 460 4 496 ALL 502 MAG 1990-97 502 EFI & 1998-UP MAG MPI 888 FORD 1971-77 1977-84 898 GM 4 1987-89 2.5L (153 CID) 4 5 1987-UP 3.0L (181 CID) 4 5 3.0LX (181 CID) 4 5 1990-97 207L/LX 1988-89 1988-98 4.3L/LX 5 4.3L/LX, EFI, TBI, 1998-UP MPI 5 5.0L 5 1988-UP 1987-95 5.0L IB 4 5 1988-95 5.0LX 4 5 5.0L EFI 1998-01 5.0L MIE MPI 2002-UP 5.7L 1998-UP 1988-UP 5.7L IB 4 5 1985-UP 5.7L SKI 4 5 1988-UP 7.4L 4 5 1988-UP 7.4L IB 4 5

Year

Cy.

Replaces

L4 L4 L4 L4 L4 L4 L6 L6 L6 V6 8 L4

35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-16595Q, T1 35-16595Q, T1 35-16595Q, T1 35-883702K, Q 35-16595Q,T1 35-866340K01,

35-866340K01, Q3

8 8 V6 8 8 8 8 8 8

35-802886Q 35-16595Q, T1 35-883702K, Q 35-802886Q 35-16595Q, T1 35-802886Q 35-866340K01, Q3 35-866340K01, Q3 35-866340K01, Q3

35-883702K, Q

Q3 Q3 Q3 Q3 Q3 Q3

S18-7824

8 8 8 8 8 8 8 8 8 8

35-866340K01, Q3 35-866340K01, Q3 35-16595Q, T1 35-866340K01, Q3 35-16595Q, T1 35-866340K01, Q3 35-866340K01, Q3 35-866340K01, Q3 35-866340K01, Q3 35-866340K01, Q3

35-866340K01, Q3

8 8 8 8 8 8

35-16595Q, T1 35-16595Q, T1 35-16595Q, T1 35-16595Q, T1 35-866340K01, Q3 35-866340K01, Q3

8 8 8 8

35-16595Q, T1 35-866340K01, Q3 35-866340K01, Q3 35-866340K01, Q3

8 8 L4 L4 L4 L4 V6 V6

35-802886Q 35-16595Q, T1 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-883702K,Q 35-883702K,Q

Q3 Q3 Q3 Q3

8 8 8 8 8 8 8 8 8 8

35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01, 35-866340K01,

Q3 Q3 Q3 Q3 Q3 Q3 Q3 Q3 Q3 Q3

S18-7875

S18-7876

Volvo-Penta速 (Gasoline) BLA Code

Model

Cy. Replaces

S18-7824 S18-7879 S18-7879 S18-7879 S18-7879 S18-7879 S18-7875 S18-7824 S18-7875 S18-7875 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7879 S18-7875 S18-7824 S18-7879 S18-7824 S18-7824 S18-7824 S18-7824 S18-7875 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824 S18-7824

3.0GL/GS 4.3Gi/GL/GS 430A/B 431A/B 432A 434A 5.0Fi/FL 5.7Gi/GL 5.8Fi/FL 5.8FSi 500A/B 501A/B 570A/MS4A 471A 572A 7.4Gi/GL/Gsi 740A/B 8.2GL AQ175A AQ190A AQ200B/C/D/F AQ205A AQ211A AQ225B/C/D/E/F AQ231A AQ231B AQ240A AQ255A/B AQ260A/B AQ271A/B/C/D AQ280A AQ290A AQ311A/B BB225A/B/C BB231A BB260A/B/C BB261A

L4 835440-9 V6 V6 V6 V6 V6 8 8 835440-9 8 8 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 V6 8 - 8 835440-9 V6 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9 8 835440-9

3 V-Drive Model Use 18-7878-1, Optional Use 5" Tall 18-7876 for additional filtration, Not For Remote Mount, check clearance for fit, 18-7824 = 4" tall 5 18-7824 can be used on remote filter mount applications

All Sierra oil filters have Anti-Drain-Back Valve. Valve eliminates dry starts, prevents oil from draining back into crankcase during engine shut down.

378

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Sierra Outboard Oil Filters Yamaha® Model

Year

Replaces

S18-7911-1 S18-7901 S18-7902 S18-7911-1 S18-7902 S18-7911-1 S18-7911-1 S18-7902 S18-7911-1 S18-7902 S18-7911-1 S18-7911-1 S18-7911-1 S18-7902 S18-7911-1 S18-7911-1 S18-7911-1 S18-7906-1 S18-7906-1 S18-7906-1 S18-7954

F9.9/T9.9 F9.9/T9.9 F15 F15 F25 F25/T25 F30 F40 F40 F50/T50 F50/T50 F60/T60 F75/T90 F80/T100 F80 F100 F115 F150 F200/F225 F250 F350

2006-2007 1990-2005 1998-1999 2000-2007 1998-1999 2000-2006 2001-2006 1999-2000 2001-2006 1995-1999 2000-2005 2002-2005 2003-2006 1999 2000-2003 2000-2002 2001-2006 2004-2006 2002-2006 2005-2006 2008-UP

5GH-13440-00-00 6G8-13440-00-00 3FV-13440-00-00 5GH-13440-00-00 3FV-13440-00-00 5GH-13440-00-00 5GH-13440-00-00 3FV-13440-00-00 5GH-13440-00-00 3FV-13440-00-00 5GH-13440-00-00 5GH-13440-00-00 5GH-13440-00-00 3FV-13440-00-00 5GH-13440-00-00 5GH-13440-00-00 5GH-13440-00-00 69J-13440-00-00 69J-13440-00-00 69J-13440-00-00 N26-13440-00-00

Evinrude®/Johnson® (Bombardier) BLA Code

Model

Year

Replaces

S18-7916 S18-7916 S18-7903 S18-7903 S18-7915-1 S18-7915-1 S18-7915-1 S18-7915-1 S18-7915-1 S18-7915-1 S18-7915-1 S18-7896 S18-7896 S18-7897 S18-7895 S18-7895

10HP 15HP 10HP 15HP 25HP 30HP 30HP 40HP 50HP 60HP 70HP 90HP 115HP 140HP 200HP 225HP

1995-2001 1995-2001 2002-2007 2002-2007 2002-2007 2000-2001 2004-2005 1999-2006 1999-2006 2002-2006 2001-2006 2003-2006 2003-2006 2003-2006 2004-2006 2004-2006

434839 434839 5033102, 763364 5033102, 763364 5031411, 778885 5031411, 778885 5031411, 778885 5031411, 778885 5031411, 778885 5031411, 778885 5031411, 778885 778886, 5033539 778886, 5033539 778887, 5033919 778888, 5035703 778888, 5035703

Year

Replaces

Suzuki® BLA Code

Model

S18-7903 S18-7915-1 S18-7896 S18-7897 S18-7895 S18-7895 S18-7905 S18-7905

DF9.9, 1996-2006 DF15 DF25, 2000-2006 DF30 DF40, 1999-2006 DF50, DF60, DF70 DF90, 2001-2006 DF115 DF140 2002-2004 DF150, 2006 DF175 DF200, 2004-2007 DF225, DF250 DF200, 2008 DF225, DF250 DF150, 2007 & UP DF175, DF300

16510-05240 16510-87J00 16510-87J00

16510-61A01 16510-82J00 16510-93J00

BLA Code S18-9884

BLA Code

Model

Year

SS Number

S18-7913 BF8D, BFP8D 2001-Current S18-7913 BF9D, BFP9D 2001-Current S18-7913 BF15D, BFP15D 2003-Current S18-7913 BF20D 2003-Current S18-7913 BF25A 1998-Earlier S18-7913 BF30A 1998-Earlier S18-7913 BF35AM 1998-Earlier S18-7913 BF40A 1998-Earlier S18-7913 BF45AM 1998-Earlier S18-7913 BF50A 1998-Earlier S18-7911-1 BF25 1999-Current S18-7911-1 BF30 1999-Current S18-7911-1 BF40 1999-Current S18-7911-1 BF50 1999-Current S18-7909 BF75, BF90 1997-Current S18-7909 BF115, BF130 1999-Current S18-7909 BF135, BF150 2004-Current S18-7909 BF200, BF225 2002-Current

Replaces

15400-PFB-004 15400-PFB-014 15400-PM3-004 15400-PFB-014 15400-PM3-004 15400-PFB-014 15400-PJ7-015 15400-PFB-014 15400-PJ7-005 15400-PFB-014 15400-PJ7-005 15400-PFB-014 15400-PJ7-005 15400-PFB-014 15400-PJ7-005 15400-PFB-014 15400-PJ7-005 15400-PFB-014 15400-PJ7-005 15400-PFB-014 15400-ZW4-003 15400-PFB-007 15400-ZW4-003 15400-PFB-007 15400-ZW4-003 15400-PFB-007 15400-ZW4-003 15400-PFB-007 15400-POH-305PE 15400-PLM-A01PE 15400-POH-305 15400-PLM-A01PE 15400-ZJ1-004 15400-PLM-A01PE 15400-ZJ1-999AH 15400-PLM-A01PE

Mercury® BLA Code

Model

Year

SS Number

S18-7913 8HP Bodensee 2001-2004 (323cc) S18-7901 8HP Bodensee 1995-1998 (323cc) S18-7901 8HP Bodensee 1999-2000 (323cc) S18-7901 9.9HP (323cc) 1995-1998 S18-7913 9.9HP (323cc) 1999-UP S18-7913 25HP 1998 S18-7914 25HP 1999-UP S18-7914 30HP 1999-UP S18-7914 40HP (3cyl) 2001-UP S18-7914 40HP (4cyl) 1998-UP S18-7914 45HP Bodensee 1996-2000 S18-7914 50HP 2001-UP S18-7914 50HP Bigfoot 1996-2000 S18-7914 60HP 2001-UP S18-7914 70HP TBI, EFI 1999-UP S18-7914 80HP 2006-UP S18-7914 90HP 1999-UP S18-7914 115HP EFI 2001-UP S18-7921 135 Verado ALL S18-7921 150 Verado ALL S18-7921 175 Verado ALL S18-7918 200 Verado ALL S18-7906-1 225HP EFI 2003-UP S18-7918 225 Verado ALL S18-7918 250 Verado ALL S18-7918 275 Verado ALL

Nissan®/Tohatsu®

16510-96J00

BLA Code

Model

S18-7911-1 9.9-30HP 16510-96J00

S18-7903

S18-7906

Honda®

16510-93J00

Fuel Filter & Bowl Wrench Racor® Style RK22628 A must tool for every workshop for removing filter cartridges & filter bowls.

S18-7901

Replaces

35-822626Q1, Q3 P086824-P325499 825467T1, A1

H000058-H017099

825467T1, A1

G760300-T178499

35-822626Q1, Q3 H000058-H017099 35-822626Q1, Q3 G760300-1B226999 35-822626Q2, Q04 G590000-G760299 35-822626Q2, Q04 G760300-1B226999 35-822626Q2, Q04 G760300-T408999 35-822626Q2, Q04 T409000-UP 35-822626Q2, Q04 G231123-UP 35-822626Q2, Q04 G231123-T178499 35-822626Q2, Q04 T178500-UP 35-822626Q2, Q04 G231123-T178499 35-822626Q2, Q04 T178500-UP 35-822626Q2, Q04 G960500-UP 35-822626Q04 1B227000-UP 35-822626Q2, Q04 G960500-UP 35-822626Q2, Q04 T178500-1B226999 35-896546T 1B227000-UP 35-896546T 1B227000-UP 35-896546T 1B227000-UP 35-883701K01 T980000-1B226999 35-822626T7, Q15 T653945-UP 35-883701K01 1B227000-UP 35-883701K01 T801000-UP 35-883701K01 T801000-UP

Year

Replaces

ALL

3R0076150M

Outboard, Fuel Fittings & PROPELLERS

BLA Code

All Sierra Outboard oil filters feature Anti-Drain-Back Valve. Valve eliminates dry starts, prevents oil from draining back into crankcase during engine shut down.

Oil Filter Wrenches Heavy duty oil filter wrenches in three popular sizes.

BLA Code

Size

S18-9778 S18-9789 S18-9790

27/16"- 3" 29/10" - 31/4" 35/16" - 33/4"

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

379

section

Outboard, Fuel Fittings & PROPELLERS

Three Way Valves

Fuel Vent Line Surge Protector

Used to connect two permanent tanks to a single motor, providing fuel flow to the engine from one or the other tank. The valve can also be used to close the flow from both tanks. Rotate handle to select tank, the detent in the valve ensures alignment of the port opening. Forged brass construction. 1/4" or 3/8" NPT internally threaded ports. Brass hose tails are available separately.

Helps avoid fuel spills when refuelling by preventing fuel surging through the breather hose as the fuel tank fills. Glass filled polypropylene construction with a surge ball design which closes the line under fuel surge pressure, but permits air flow under normal conditions. Installs in the fuel tank vent line, hose clamps required. Meets ABYC standard.

BLA Code 200494

BLA Code

Ports NPT

200490

1/4"

119

Fuel Tank Breathers With Water Trap These uniquely designed, 90Ë&#x161; low profile fuel tank breathers help prevent water from entering the fuel tank via the breather. The innovative patented design features a series of baffles and traps that prevent water from splashing into the tank, yet allow air to vent freely. Constructed from corrosion proof polypropylene. Available in all black or black with white head.

138130 Brass hose tail 1/4" NPT to suit 6mm ID hose 138148 Brass hose tail 3/8" NPT to suit 10mm ID hose S18-8109 Brass hose tail 3/8" NPT to suit 8mm ID hose

'P' Trap Surge Protector A multi-function product which helps avoid fuel spills, via the built-in surge protector, provides fuel tank venting and resists water intrusion into the fuel system. Meets ABYC standards. Constructed from glass filled polypropylene, suitable for aluminium boats. 200504

200502 c

BLA Height Width Max. Hull Intrusion Hose Mount Code Thickness Hole mm mm mm mm mm mm

BLA Head Hose Mount Max. Hull Code Colour Size Hole Thickness mm mm mm

mm mm mm

200496

200502 200504

50 50

Fuel Tank Breathers - Polypropylene Straight fuel tank breathers. Patented splash resistant design. Constructed from corrosion resistant polypropylene, ideal for aluminium boats. Suits hulls up to 16mm thick.

BLA Colour Hose Code Size mm 200506 Black 200508 White

380

Hose Length Max Dia mm mm mm

16 16

Mount Intrusion Protrusion Hole mm mm mm 22 22

Quality marine equipment

55 55

24 24

Black White

16 16

Fuel Tank Breather

19 19

16 16

81 23 81 23

- Nylon

Manufactured in fuel resistant black nylon. Ideal for aluminium boats. Low profile fuel tank breather with monel gauze flame arrestor. Suits hulls up to 19mm thick.

BLA Code

Head Size mm

200514 30x35

Mount Hose Intrusion Protrusion Hole Size mm mm mm mm 19

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

Fuel Tank Breather

- Chrome

Round head, chrome plated brass breather with monel gauze flame arrestor. Suits hulls up to 16mm thick.

Hose Size mm

Mount Hole mm

200522

Head Intrusion Protrusion Dia. mm mm mm 25

Fuel Tank Breathers

- Angled

Low profile, chrome plated zinc alloy breather with monel gauze flame arrestor. Suits hulls up to 20mm thick

BLA Code 200524

Hose Mount Size Hole mm mm 16

Head Intrusion Protrusion Size mm mm mm 33x23

Fuel Tank Breather

Round head, slimline chrome plated brass breathers with stainless steel gauze flame arrestor. Internal intrusion is 68mm, protrudes 15mm from the hull. Suits hulls up to 10mm thick.

- Stainless Steel

Round head, cast 316 grade stainless steel breather with monel gauze flame arrestor. Suits hulls up to 25mm thick.

200526

BLA Code 200532 200528

BLA Angle Code 200526 200528

Hose Size mm 13

Mount Head Intrusion Protrusion Hole Dia. mm mm mm mm 19

Recessed Fuel Breathers Hose Mount Size Hole mm

90˚ bend down 90˚ bend up

13 13

19 19

‘P’ Trap Tank Vent Adaptor

Head Dia. mm 25 25

- Nylon

The nylon ‘P’ trap is designed to be used with recessed fuel breathers 200535 & 200539 which suit 16mm ID hose. The ‘P’ trap eliminates the need to loop the vent hose.

Cast 316 grade stainless steel, four vent hole, round head angled breather, available with a choice of recessed cup materials. Provides flush hull installation, suitable for all types of hull material. Breathers 200535-200537 are supplied with pressed stainless steel recessed cups and stainless steel nut. The 200539 stalon breather is supplied with both pressed stainless steel and polished aluminium outer recessed cup, nylon insulating washer, nylon inner cup and nut. A shallow pressed stainless steel inner cup washer is available as a separate part to increase the maximum hull thickness from 19mm to 32mm. Protrusion is only 4mm.

b e

200535

Outboard, Fuel Fittings & PROPELLERS

BLA Code

21 20

- Chrome

c 200539

200538

BLA Material Hose Code Size mm Breather shown for illustration only

BLA Code

a mm

b mm

c mm

d mm

e mm

200534

Mount Hole mm

Head Intrusion Dia. mm mm

200535 S/S 16 36 46 200536 S/S 19 36 46 200537 S/S 13 36 46 200539 Stalon 16 36 46 200538 Shallow S/S inner cup washer

64 64 64 64

www.bla.com.au

381

section

Outboard, Fuel Fittings & PROPELLERS

Adjustable Outboard Bracket - Galvanised

Adjustable Outboard Brackets - Galvanised

Economical, adjustable four position galvanised auxiliary motor bracket with lifting handle and timber motor support.

Economical two position (up or down) auxiliary motor brackets. Fully galvanised frame with timber motor support pad.

BLA Max. Code HP 200612

200x150

300

Outboard Motor Bracket

Mount Holes mm 10 r/h - Stainless Steel

Two position stainless steel frame with non corrosive moulded plastic outboard plate. Spring loaded mechanism power assists the lift of the outboard to the up position. Supplied complete with four 8mm x 75mm set screws, washers and nyloc nuts.

BLA Max. Code HP 200608 200610

5 10

Mount Travel Base mm mm 200x150 200x160

270 310

Mount Holes mm 10 r/h 10 r/h

Outboard Motor Bracket

- Anodised Alloy

Sturdy anodised alloy frame construction, with stainless steel fasteners. Moulded black plastic motor plate. Five position motor height adjustment. BLA Max. Mount Travel Code HP Base mm mm 200616

145x117

365

Outboard Bracket

Mount Holes mm 8

- Rail Mount

Made from U.V. stabilised reinforced polypropylene. Designed to store the outboard secure and upright, out of lockers where fumes may present a hazard, and spilled fuel could damage other stored goods. Mounts at â&#x20AC;&#x2DC;Tâ&#x20AC;&#x2122; joint of 25mm diameter rail.

BLA Max Code HP 200620

382

Mount Travel Base mm mm

Suits Rail Dia. mm

Height mm

BLA Max. Code HP

180

170

200618

Quality marine equipment

Width Depth

Mount Travel Base mm mm 230x132

345

Mount Holes mm 8

section section

Outboard Motor Protection Plate

Grey plastic pad, designed to protect the exterior surface of the transom from being marked when the outboard is attached.

Choice of grey plastic or cast alloy pad, designed to protect the interior surface of the transom from being marked by the outboard motor clamps. The alloy version includes a lug to secure the outboard with a padlock.

200624

200626

BLA Code

Top Width mm

Lower Height Thick Width mm mm mm

200622 300

275

210

BLA Material Code 200624 200626

Width mm

Height mm

Thick mm

270 315

100 100

5 8

Plastic Aluminium

Outboard Motor Backing Pads

Transom Outboard Protection Pad

Made from EVA foam, preshaped and drilled to suit most Mercury®/ Johnson®/Evinrude® and Yamaha® outboard bracket mounts. These pads reduce noise transfer by 15-40% and help reduce electrolysis. Rated to 250HP. Sold as a pair.

Moulded from a strong, flexible plastic material which is designed to be wrapped over the top of the transom to protect both sides and top from abrasion by the outboard motor. Helps reduce electrolysis and vibration transmission.

200630

200632

BLA Code 200628 BLA Suits Code

Width Height Depth mm mm mm

200630 Merc/John/Evin 200632 Yamaha®

95 95

320 325

10 10

Dinghy Outboard Motor Pad Self adhesive pad made from EVA foam. Mounted to the external surface of the transom to reduce noise transfer by 15-40%. Also helps reduce electrolysis.

Max. O/All Width Length mm mm 280

400

Outboard Motor Locks Anti-theft outboard motor locks manufactured from stainless steel with a plastic end cap and supplied complete with brass padlock. Slides over the motor clamp handles to prevent release. Also prevents the outboard motor from working loose while under way.

21 20

Outboard, Fuel Fittings & PROPELLERS

Outboard Motor Protection Plate

200644

200646

BLA Code 200634

Top Width mm

Lower Width mm

Height

Thick

390

310

305

BLA Code 200644 200646

O/All Max. Clamp Slot Length Length Width mm mm mm 240 315

180 255

13 13

www.bla.com.au

383

section

Outboard, Fuel Fittings & PROPELLERS

Motor Trolleys

Dinghy Wheel Sets

Sturdy, black EDC coated steel frames with timber motor support pad and heavy duty plastic wheels. Folds flat for storage.

Provide single handed manoeuvrability, launching and retrieval of dinghies, including motor and gear, on a variety of surfaces such as packed sand or gravel, tidal areas, grass, concrete boat ramps and bitumen car parks. A unique twist grip positively, but quickly, locks the wheels in the down position for wheeling, and in the up position for when the boat is in the water. When in the retracted position there is no protrusion above or below a standard dinghy transom. Manufactured from marine grade aluminium, stainless steel and composite materials. These boat wheels have a generous wheel size of 130mm wide x 185mm in diameter. Maximum wheel loading is 125kgs per wheel (250kgs pair) Sold as a pair. Available in two sizes.

Raised 200652

Lowered

200650

BLA Max. Height Width Depth Tube Code Dia. HP mm mm mm mm

200666 200670

200650 200652

Tinnie Mover

20 30

1010 1030

475 780

680 810

22 25

Transom Dinghy Wheels Anodised, extruded aluminium box and channel construction with welded solid aluminium shaft, pneumatic tyre on plastic rim and stainless steel fastenings. Transom mounted using two 6mm (1/4") countersunk metal threads per side. Wheels are simply reversed when the boat is in the water, stored attached, but upside down, ready to be used again at the ramp.

BLA O/All Transom Code Length Bracket Code mm mm 200664 570

384

BLA Length Length Protrusion Width Mount Code Extended Retracted Raised Holes mm mm mm mm mm

Tyre Size mm

320x32 220x60

Quality marine equipment

500 575

285 335

215 215

170 170

8 8

- Pneumatic Wheels

Tinnie mover that clamps around gunwale and chine on a tinnie. Clamp winds up or down to suit hull height, securely locking on when required. Two used, one on each side of the boat towards the rear so as to balance the load. Easy to install and takes seconds to remove. Sold as a pair. Galvanised steel frame with pneumatic tyre on plastic rim.

BLA Code

Hull Height mm

Tyre Size mm

200686 365-590 260x85 200680 Spare wheel and tyre

section section

21 20

Transom Dinghy Wheel Set

BLA Code 200674

High Performance Hydrofoils The new BLA high performance foils are designed to provide additional lift plus increased speed and control on most outboard powered boats. These tough high strength foils provide both lower on-plane and higher top end speeds while helping to prevent porpoising and sideways slip. Features: • Increased lift with improved take off and stability • Helps eliminate cavitation and porpoising • Forces stern up and bow down for smoother take offs • Two piece design allows for easy installation • Complete with stainless steel mounting hardware.

BLA Code

200798

Suits 200800

200798 Motors up to 50hp 200800 Motors over 25hp

Drill Free Sport Clip The new Sport Clip offers a drill free solution for the installation of SE Sport foils to most outboards and sterndrives. Four easy steps allows for fast, non-invasive mounting of the SE Sport foil. Features: • Innovative, fail safe mounting system • No holes need be drilled through the cavitation plate • Simple four step installation procedure • All necessary hardware included in kit • Will not wear or alter the cavitation plate • Designed to suit SE Sport 200 and SE Sport 300 Fits: all outboards and sterndrives 25HP and larger EXCEPT the following: All Volvo Penta® Mercury® 50HP Two-Stroke Mercury® 40, 50, 60HP Four-Stroke (does fit Big Foot models) Mercury Bravo II® Mercury Bravo III® (does fit models with two round anodes on bottom plate) Honda® 200HP, 225HP

Outboard, Fuel Fittings & PROPELLERS

Provides single handed manoeuvrability, launching and retrieval of small lightweight boats, inflatable’s, aluminium car toppers up to 100kg in total weight. Solid 85mm wide wheels move easily over a variety of surfaces such as packed sand or gravel, tidal areas, grass, concrete boat ramps and bitumen car parks. Simple spring action design allows the wheels to be easily flipped into the down position for boat movement. Simply flip up to store when boat is in the water. Sold as a pair.

BLA Code 200840

www.bla.com.au

385

section

Outboard, Fuel Fittings & PROPELLERS

High Performance 'SE Sport' Turbo Hydrofoils The high performance SE Sport foils will provide more speed and precision control on most outboard and stern drive powered boats. Made of flexible, high strength co-polymer, the foils are rugged enough to stop porpoising and side-to-side movement. Specially engineered crescent shaped planing surface funnels water flow to add thrust, cut planing time and provides both slower 'on plane' and higher 'top end' speeds. A special tracking feature, TURBO TRAC, locks in high speed turns without cavitation (prop blowout) for precise control. SE 200 suits motors from 8HP up to 40HP, while the SE 300 suits motors from 40HP to 350HP. Supplied with 6mm x 32mm stainless steel mount bolts, lock nuts and insulators. Features: • Increased lift with crescent plane surface • Small footprint 75-100mm narrower than most other foils • TURBO TRAC enhances thrust and control • Control tip cuts tight turns • Sleek shape compliments today’s boat designs • One piece high strength engineering grade co-polymer • Mounting holes suit other popular one piece foils

200814

200816 200812

101 64

368

104

343

432 363 Exclusive turbo trac

Exclusive turbo trac SE300 suits 25 - 350HP

SE200 suits 8HP - 40HP

BLA Code

Model Colour

200808 200810 200812 200814 200816

SE200 SE200 SE300 SE300 SE300

Turbo trac helps straight line stability and reduces side slip in turns.

Black Grey Black Grey White

Motor Starter Cord

Inboard Flusher

White polyester, plaited hard lay. Offers high strength and good abrasion resistance. Supplied in 100m flanged reels.

Quick connect flusher for inboard engines. Hose diameter 32mm.

BLA Code 200792 200794 200796

386

200808

Diameter mm 3.5 4.0 5.0

Quality marine equipment

BLA Code 200736

section section

21 20

Marine Spark Plugs

Custom flushers designed to specifically suit particular outboard models. Supplied with quick connect hose fittings.

Champion spark plugs are renowned throughout the world as leaders in spark plug technology. With a history dating back to the early 1900s, Champion has the experience and expertise to rely on for your marine engine.

200706

200702

200712

BLA Code

Outboard Model

200702 200706 200712

Evinrude®/Johnson® 6-40HP old style Mercury® 4, 5, 6, 8, 9.9, 15Hp Mariner® 6, 8, 9.9, 15Hp Yamaha® 9.9, two stroke, 15Hp Suzuki® 5, 6, 8, 9.9, 15Hp Evinrude®/Johnson® 6-7.5Hp

Outboard Motor Flushers Black rubber cup style flushers. Spring steel for fast connection. Sold complete with a quick connect style hose fitting. Suits most outboards and stern drives.

BLA Type Code Qty

200722 200723

BLA Code

Description

200722 Large rectangular flusher 200723 Medium oval flusher 200724 Small round flusher

Rectangular Outboard Flusher Black rectangular rubber cups 80mm x 130mm approximately, with spring steel tensioner and dual flush to provide equal pressure to both pick ups. Sold complete with a quick connect style hose fitting. Suits most outboards and stern drives.

BLA Code 200720

200724

201500 201504 201508 201550 201554 201558 201562 201566 201568 201569 201570 201574 201578 201582 201600 201650 201660 201664 201668 201672 201676 201680 201684 201688 201692 201696 201710 201720 201722 201727 201730 201734 201740 201744 201748 201752 201770 201774 201800 201810

j4c j6c j12YC l6vc l76v l77jc4 l78c l78v l78YC l78YC6 l82c l82yc l86c L87YC P10Y qc12pep ql16v ql76v ql77cc ql77jc4 ql78c ql78yc Cql82c ql82yc ql86c ql87yc QN84 ra8hc RC9YC RN6YC rs9yc rs12yc rv8c rv9yc rv12yc rv15yc4 ul77v ul81c XC12pepB 7712

Pack 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 4 4 6 4 4 4 4 4 4 4 4 4 4 4 6 6 4 4 4 4 4 4 4 6

www.bla.com.au

Outboard, Fuel Fittings & PROPELLERS

Outboard Motor Flushers

387

section

Water Pump Impellers -

Johnson速/Evinrude速

Outboard, Fuel Fittings & PROPELLERS

Replacement impellers manufactured to OEM specifications to suit various models. Refer to detailed application guide on pages 390 & 391.

388

S18-3001

S18-3002

S18-3003

S18-3005

S18-3006

S18-3015 with key

S18-3043

S18-3044

S18-3050

S18-3051

S18-3053 with wedge key

S18-3055

S18-3059 with wedge key

S18-3082

S18-3083

S18-3090

S18-3091

S18-3104

Quality marine equipment

S18-3366

S18-3368

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Water Pump Repair Kits

- Evinrude速/Johnson速

Replacement water pump kits manufactured to OEM specifications to suit various models. Refer to detailed application guide on the next page and on page 391.

S18-3210

S18-3202

S18-3203

S18-3211

S18-3238

S18-3325

S18-3376

S18-3378

S18-3379

S18-3380

S18-3381

S18-3382

S18-3383

S18-3385

Outboard, Fuel Fittings & PROPELLERS

S18-3201

S18-3384

S18-3387

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

389

section

Water Pump Repair Kits -

Evinrude®/Johnson®

Outboard, Fuel Fittings & PROPELLERS

Replacement water pump kits manufactured to OEM specifications to suit various models. Refer to detailed application guide below and opposite.

S18-3388

S18-3390

S18-3394

S18-3399

S18-3400

S18-3401

S18-3402

Evinrude®/johnson® APPLICATION Guide

Engine Model Year Sierra Impeller OEM Part Sierra Impeller Horsepower Number Repair Kit (BLA Code) (BLA Code)

2 2.5 3 4 4 (7) 4 (8) 4 Deluxe 4 4.5 5 5 (4 Stroke) 5.5 6 6 6 6 (4 Stroke) 7.5 8 9.5 10 10 9.9/15 (2 Stroke) 9.9/15 (4 Stroke) 15, 18 20 20 20 25 25 25 25 28 28 30 30 33 35 35 35 35 35 35 35 Jet

1985-90 1987-06 1952-78 1969-72 1973-83 1976-80 1980-97 1987-06 1980-97 1965-68 1998 on 1954-64 1952-78 1979 1984-97 1998 on 1954-58 1986-97 1964-73 1949-57 1958-63 1974 on 1995 on 1953-65 1966-73 1982-84 1985 on 1951-55 1969-78 1979-84 1985 on 1962-64 1978 on 1951-57 1984 on 1962-71 1951-57 1958-59 1976-77 1978-79 1980-82 1983 on 1992-93

1. Except chrome pumps 3. 'S' Suffix 4. 'F' Suffix

390

Quality marine equipment

S18-3090 S18-3015 S18-3001 S18-3001 S18-3001 S18-3090 S18-3091 S18-3015 S18-3091 S18-3001 S18-3091 S18-3001 S18-3001 S18-3090 S18-3091 S18-3091 S18-3001 S18-3091 S18-3003 S18-3002 S18-3003 S18-3050 S18-3050 S18-3002 S18-3002 S18-3051 S18-3051 S18-3006 S18-3002 S18-3051 S18-3051 S18-3006 S18-3051 S18-3006 S18-3051 S18-3006 S18-3006 S18-3083 S18-3006 S18-3051 S18-3051 S18-3051 S18-3104

Sierra Pump Kit Without Housing (BLA Code)

387361 433935 277181 & 434424 S18-3201 277181 & 434424 S18-3201 277181 & 434424 S18-3201 387361 389576 433935 389576 277181 & 434424 389576 277181 & 434424 S18-3202 277181 & 434424 S18-3202 387361 389576 398576 277181 & 434424 S18-3202 389576 377178, 775519 S18-3402 375638, 775518 S18-3203 377178, 775519 S18-3402 386084 S18-3400 386084 S18-3400 375638, 775518 S18-3203 377638, 775518 S18-3203 395289 S18-3401 395289 S18-3381 378891, 775521 375638, 775518 S18-3203 395289 S18-3401 395289 S18-3381 378891, 775521 395289 S18-3401 378891, 775521 395289 S18-3381 378891, 775521 378891, 775521 377230, 777213 378891, 775521 395289 S18-3238 395289 395289 432941 S18-3394

OEM Part Number

382296 382296 391698 391698

395271 393509

395271 393509 395271 393509

388891

433548

5. Except 1993-94 25" and 30" V6 and V8 7. For water pumps using 1 water tube 8. 90º Gearcase

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Evinrude /johnson APPLICATION Guide

Engine Model Year Sierra Impeller OEM Part Horsepower Number (BLA Code) 40 40 40 Comm. 40 40 40 40 45/55 Comm. 45/55 45/55 Comm. 48 48 50 50 50 50 55 55 55 60 60 60 60 60 65 65 65 Comm. 65 Comm. 70 70 70 75 75 75 80 85 85 85 85 85 90 90 90 SL, 90 DL 100 100 100 Comm. (1) 105 Comm. 115 115 115 115 115 SL, 115 DL 120 25" (4) 125 125 25" ESX (3) 125 25" ESX (4) 125 25" ESX 130 25" 130 135 135 135 25" 140 140 140 25" (4) 140 25" 150 150 150 20" 150 25" 150 SL 20" 150 EL 20" 150 DL 150 175 175 SL 20" 175 EL 20" 175 25" 175 DL 200 200 Comm. 225 20" 225 25" & 30" 235 235 V4 Cross 20" & 25" V4 Loop 20" V4, V6, V8 (5) V6, V8 20" V6, V8 25" & 30" Sea Drives 1. Except chrome pumps 3. 'S' Suffix 4. 'F' Suffix

1960-70 1971-73 1981-90 1984-85 1986-88 1989-98 1999 on 1985 1989 1986-88 1987-88 1989-96 1971-78 1979-85 1986-88 1989-98 1968-69 1976-78 1979-85 1964-67 1970-71 1980-85 1986-94 1995 on 1968 1972-73 1984-94 1995 on 1974-78 1979-94 1995 on 1960-65 1974-78 1979-88 1966-67 1968 1969-72 1973-77 1978 1979-95 1964-68 1979 on 1995 on 1969-72 1979 on 1984 on 1998-2001 1969-70 1973-76 1977-78 1979 on 1995 on 1993-00 1971-72 1993-94 1993-94 1994-95 1994-2000 1997 on 1973-75 1976 2001 1977-78 1979 on 1993 1994-2000 1976-78 1979 on 1993 on 1993 on 1994-98 1996-98 1997 on 2000 on 1976-78 1994-98 1996-98 1993 on 1997 on 1976-78 1990 1993 on 1993-97 1978 1979 on 1993 on 1993 on 1982-94 1993 on 1993 on 1979 on

S18-3083 S18-3006 S18-3366 S18-3055 S18-3368 S18-3104 S18-3053 S18-3055 S18-3368 S18-3368 S18-3368 S18-3104 S18-3083 S18-3055 S18-3368 S18-3104 S18-3082 S18-3083 S18-3055 S18-3005 S18-3082 S18-3055 S18-3053 S18-3053 S18-3005 S18-3082 S18-3053 S18-3053 S18-3082 S18-3053 S18-3053 S18-3005 S18-3082 S18-3053 S18-3005 S18-3005 S18-3044 S18-3043 S18-3043 S18-3059 S18-3005 S18-3059 S18-3059 S18-3044 S18-3059 S18-3059 S18-3059 S18-3044 S18-3043 S18-3043 S18-3059 S18-3059 S18-3059 S18-3044 S18-3059 S18-3059 S18-3059 S18-3059 S18-3059 S18-3043 S18-3043 S18-3059 S18-3043 S18-3059 S18-3059 S18-3059 S18-3043 S18-3059 S18-3059 S18-3059 S18-3059 S18-3059 S18-3059 S18-3059 S18-3043 S18-3059 S18-3059 S18-3059 S18-3059 S18-3043 S18-3059 S18-3059 S18-3059 S18-3043 S18-3059 S18-3059 S18-3059 S18-3059 S18-3059 S18-3059 S18-3059

395864, 395864, 395864, 395864, 395864, 395864,

395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864,

395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864, 395864,

Sierra Pump Kit Without Housing (BLA Code)

377230, 777213 378891, 775521 390286 S18-3379 389589 S18-3385 396809 S18-3385 432941 S18-3394 396725 S18-3394 389589 S18-3380 396809 S18-3385 396809 S18-3385 396809 S18-3385 432941 S18-3394 377230, 777213 S18-3376 389589 S18-3380 396809 S18-3385 432941 S18-3394 382547 377230, 777213 389589 S18-3380 377992 382547 389589 S18-3380 396725 S18-3387 396725 S18-3387 377992 382547 396725 S18-3387 396725 S18-3387 382547 S18-3388 396725 S18-3387 396725 S18-3387 377992 388547 S18-3388 396725 S18-3387 377992 377992 385072 389642 S18-3384 389642 397131, 435821, 5001593 S18-3211 S18-3390 377992 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 385072 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 385072 389642 S18-3384 389642 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 385072 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 389642 S18-3210 S18-3384 389642 397131, 435821, 5001593 S18-3211 S18-3390 389642 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 389642 S18-3210 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 389642 S18-3210 S18-3393 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 389642 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 389642 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390 397131, 435821, 5001593 S18-3211 S18-3390

OEM Part Number

390381 396932 396932 433548 433548 390770 396932 396932 396932 433548 384956 390770 396932 433548

390770

390770 432956 432956

432956 432956 389143 432956 432956 389143 432956

386124 395060 395060 395060 395060 395060 395060 386124 395060 395060 395060 395060 395060 395060 395060 395060 386124 395060 395060 395060 395060 395060 395060 395060 395060 395060 395060 395060 395073 395060 395060 395060 395060

Outboard, Fuel Fittings & PROPELLERS

Sierra Impeller Repair Kit (BLA Code)

395060 395060 395060 395060 395060 395060 395060 395060 395060 395060

5. Except 1993-94 25" and 30" V6 and V8 7. For water pumps using 1 water tube 8. 90º Gearcase

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

391

section

Mercury速/Mariner速

Water Pump Impellers

Outboard, Fuel Fittings & PROPELLERS

Replacement impellers manufactured to OEM specifications to suit various models. Refer to detailed application guides on pages 394-396.

S18-3007

S18-3008

S18-3012

S18-3017

S18-3039

S18-3052

S18-3054

S18-3056

S18-3057

S18-3062

S18-3063

S18-3066

S18-3067

S18-3069

S18-3072

S18-3073

S18-8900

S18-3098

S18-3074

392

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Water Pump Repair Kits -

Mercury速/Mariner速

Replacement water pump kits manufactured to OEM specifications to suit various models. Refer to detailed application guides on pages 394-396.

S18-3149-1

S18-3207

S18-3214

S18-3215

S18-3217

S18-3239

S18-3314

S18-3319

S18-3316

S18-3322

S18-3324

Outboard, Fuel Fittings & PROPELLERS

S18-3148

S18-3323

S18-3425

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

393

section

Water Pump Repair Kits -

Mercury速/Mariner速

Outboard, Fuel Fittings & PROPELLERS

Replacement water pump kits manufactured to OEM specifications to suit various models. Refer to detailed application guides below and opposite.

S18-3426

S18-3427

S18-3447

S18-3448

速 Engine Serial Number Sierra Impeller OEM Part Sierra Impeller Sierra OEM Part Horsepower Beginning no. Ending no. Number Repair Kit Water Pump Kit Number (BLA Code) (BLA Code) (BLA Code) 3.3 D901217 on S18-3098 47-16154-3 3.5 358136 6202172 S18-3012 47-22748 3.5 6202173 on S18-3054 (2) 47-89980 3.6 5404657 on S18-3054 (2) 47-89980 3.9 1655013 2498135 S18-3012 47-22748 S18-3447 46-46893A6 4 (1cyl.) 2498136 4107219 S18-3039 (3) 47-89981 S18-3239 4 (2cyl.) 5589202 on S18-3054 (2) 47-89980 4 (made in USA) 5595532 9075838 S18-3054 (2) 47-89980 4 (made in USA) 5595532 9075838 S18-3039 (3) 47-89981 S18-3239 (3) S18-3446 46-70941A3 4 (1 cyl.) A809601 on S18-3098 47-16154-3 4.5 4107220 5595531 S18-3039 (3) 47-89981 S18-3239 (1) S18-3446 46-70941A3 4.5 5595532 on S18-3054 (2) 47-89980 4.5 5595532 on S18-3039 (3) 47-89981 S18-3239 (3) S18-3446 46-70941A3 5 338136 574128 S18-3012 47-22748 5 (1 cyl.) A809601 on S18-3098 47-16154-3 6 888005 1916138 S18-3012 47-22748 6 1916139 2529894 S18-3039 (3) 47-89981 S18-3239 6 A197112 on S18-3062 47-42038-2 7.5 2529895 4131609 S18-3039 (3) 47-89981 S18-3447 46-46893A6 7.5 4131610 5226934 S18-3039 (3) 47-89981 S18-3239 S18-3446 46-70941A3 7.5 5206550 on S18-3054 (2) 47-89980 7.5 5206550 on S18-3039 (3) 47-89981 S18-3239 S18-3446 46-70941A3 8 A197112 on S18-3062 47-42038-2 8 (4 stroke) G760300 on S18-3062 47-42038-2 9.8 1865779 4126459 S18-3039 (3) 47-89981 S18-3239 S18-3447 46-46893A6 9.8 4126460 5206549 S18-3039 (3) 47-89981 S18-3239 S18-3446 46-70941A3 9.8 5206550 on S18-3054 (2) 47-89980 9.8 5206550 on S18-3039 (3) 47-89981 S18-3239 S18-3446 46-70941A3 9.9 A197112 on S18-3062 47-42038-2 9.9 (4 stroke) G760300 on S18-3062 47-42038-2 XR10 SeaPro D038000 on S18-3062 47-42038-2 10 500022 1057993 S18-3008 47-20813 15 B292414 on S18-3062 47-42038-2 15 SeaPro G044365 on S18-3062 47-42038-2 16 700000 on S18-3008 47-20813 18 5837437 on S18-3057 47-85089-3 S18-3215 47-85089T7 20 860970 1292909 S18-3008 47-20813 20 2827677 6443972 S18-3052 47-89982 S18-3448 46-78744A3 20 6443973 on S18-3057 47-85089-3 S18-3215 47-85089T7 22 1158546 1238089 S18-3008 47-20813 25, 25XD, 25 Sea Pro 5705532 on S18-3057 47-85089-3 S18-3215 47-85089T7 25 (3 cyl) E268781 on S18-3057 47-85089-3 S18-3215 47-85089T7 30 950250 1260724 S18-3008 47-20813 30 1271884 1448139 S18-3007 47-89983 S18-3207 S18-3507 (4) 46-60366A1 30 Jet C159200 G589999 S18-3007 47-89983 S18-3207 S18-3324 46-77177A3 30 Jet G590000 on S18-3057 47-85089-3 S18-3207 S18-3324 46-77177A3 30 (2 cyl.) G053314 on S18-3057 47-85089-3 35 1217222 1448139 S18-3007 47-89983 35 1571114 1960826 S18-3007 47-89983 S18-3207 S18-3507 (4) 46-60366A1 35 1960827 6445652 S18-3007 47-89983 S18-3207 S18-3507 (4) 46-60366A1 35 6445653 on S18-3007 47-89983 S18-3207 S18-3324 47-89983T2 40 941751 1224480 S18-3008 47-20813 40 1224481 1476509 S18-3007 47-89983 40 2874704 4362214 S18-3007 47-89983 S18-3207 47-89983T2 S18-3322 40 4362215 4860102 S18-3007 47-89983 S18-3207 47-89983T2 S18-3323

Mercury Reference Guide

1. For S/N 5206550 on .456 I.D only 2. .438 I.D. only

394

S18-3446

Quality marine equipment

3. .456 I.D. only

4 . Water pump kit with top housing only.

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Mercury Reference Guide

1. For S/N 5206550 on .456 I.D only 2. .438 I.D. only

3. .456 I.D. only

Outboard, Fuel Fittings & PROPELLERS

Engine Serial Number Sierra Impeller OEM Part Sierra Impeller OEM Part Sierra Horsepower Beginning no. Ending no. Number Repair Kit Number Water Pump Kit (BLA Code) (BLA Code) (BLA Code) 40 (2 cyl) 4860103 6445653 S18-3007 47-89983 S18-3207 47-89983T2 S18-3324 40 (2 cyl) G053314 on S18-3057 47-85089-3 40 (3 cyl)) G531301 on S18-3057 47-85089-3 40 (4 cyl) C159200 on S18-3007 47-89983 S18-3207 47-89983T2 S18-3324 40 (4 stroke, std) G231123 G760299 S18-3057 47-85089-3 40 (4 stroke) 2:1 ratio G760300 T408999 S18-3057 47-85089-3 T228405 on S18-8900 47-19453 40 (4 stroke, 4 cyl) 1.83:1 ratio 40 (4 stroke, 4 cyl) 2.31:1 ratio (Bigfoot) T228405 on S18-3056 47-43026-2/T2 S18-3214 47-43026T6/8/11 40 (EFI 4 stroke) 1.83:1 ratio T409000 on S18-8900 47-19453 40 (EFI 4 stroke) 2.31:1 ratio (Bigfoot) T409000 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 40 (4 stroke, bigfoot) & 2.31:1 ratio G231123 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 45 1279685 1476509 S18-3007 47-89983 45 5531630 on S18-3007 47-89983 S18-3207 47-89983T2 S18-3324 45 Jet (3 cyl) D000750 on S18-8900 47-19453 45 (4 stroke, std) Bodensee G231123 on S18-3057 47-85089-3 45 (4 stroke, bigfoot) Bodensee G231123 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 50 1421113 1521913 S18-3007 47-89983 50 1521914 2514918 S18-3007 47-89983 S18-3207 47-89983T2 S18-3507 (4) 50 2514919 4357639 S18-3007 47-89983 S18-3207 47-89983T2 S18-3322 50 4357640 4962055 S18-3007 47-89983 S18-3207 \47-89983T2 S18-3323 50 (4 cyl) 4962056 on S18-3007 47-89983 S18-3207 47-89983T2 S18-3324 50 (3 cyl) 6428681 D000749 S18-3007 47-89983 S18-3207 47-89983T2 S18-3324 50 (3 cyl) D000750 G589999 S18-8900 47-19453 50 (3 cyl) G590000 on S18-3057 47-85089-3 50 (4 stroke std) G231123 on S18-3057 47-85089-3 50 (4 stroke, 4 cyl) 1.83:1 ratio T178500 on S18-8900 47-19453 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 50 (4 stroke, 4 cyl) 2.31:1 ratio (Bigfoot) T178500 50 (EFI 4 stroke) 1.83:1 ratio T409000 on S18-8900 47-19453 T409000 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 50 (EFI 4 stroke) 2.31:1 ratio (Bigfoot) 50 (40 stroke, Bigfoot) G231123 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 55 (3 cyl) D00750 on S18-8900 47-19453 60 6428681 D000749 S18-3007 47-89983 S18-3207 47-89983T2 S18-3324 60 Sea Pro D000750 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 60 marathon D000750 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 60 bigfoot D000750 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 60 (3 cyl) D000750 on S18-8900 47-19453 60 (4 stroke, std) OT178500 on S18-8900 47-19453 60 (4 stroke, bigfoot) OT178500 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 65 (4 cyl) 1542745 3293183 S18-3017 47-89984 S18-3217 46-96148A5 65 (3 cyl) 3293184 4382056 S18-3007 47-89983 S18-3207 47-89983T2 S18-3322 65 (3 cyl) 4382057 4571651 S18-3007 47-89983 S18-3207 47-89983T2 S18-3324 65 Jet OD283222 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 70 1413611 1566239 S18-3017 47-89984 S18-3217 46-96148A5 70 (3 cyl) 4571652 4977156 S18-3007 47-89983 S18-3207 47-89983T2 S18-3323 70 4977157 B110053 S18-3007 47-89983 S18-3207 47-89983T2 S18-3324 70 B110054 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 75 (4 cyl) 6432901 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3314 75 (3 cyl) A996142 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 75 (3 cyl) C222000 on S18-3056 47-43026-2/T2 S18-3214 47-43026T6/8/11 75 (4 stroke) OG960500 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 80 1355468 3493912 S18-3017 47-89984 S18-3217 46-96148A5 80 (4 cyl) 4831999 6432900 S18-3017 47-89984 S18-3217 46-96148A5 S18-3314 80 (3 cyl) A996142 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 80 Jet OD28322 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 85 1460999 4831998 S18-3017 47-89984 S18-3217 46-96148A5 85 (4 cyl) 4590512 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3314 90 (6 cyl) 1766824 1869775 S18-3017 47-89984 S18-3217 46-96148A5 90 (6 cyl) 4845301 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3314 90 (3 cyl) B110054 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 90 (4 stroke) O690500 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 95 1869776 2318585 S18-3017 47-89984 S18-3217 46-96148A5 100 (6 cyl) 1464949 3253111 S18-3017 47-89984 S18-3217 46-96148A5 100 (4 cyl) B209468 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 105 Jet OD182000 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3319 110 1870204 2314955 S18-3017 47-89984 S18-3217 46-96148A5 115 (6 cyl) 2836019 on S18-3017 47-89984 S18-3217 46-96148A5 115 (6 cyl) 4694237 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3314 115 (4 cyl) B209468 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 115 (4 Stroke) OT178500 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 125 (6 cyl) 2314956 3253111 S18-3017 47-89984 S18-3217 46-96148A5 125 (4 cyl) OD283222 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 135 (6 cyl inline) 2839369 3293233 S18-3017 47-89984 S18-3217 46-96148A5 V135 904646 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3319 140 (6 cyl inline) 3293234 on S18-3017 47-89984 S18-3217 46-96148A5 140 4865678 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3314 140 Jet OD082000 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3319 150 (6 cyl inline) 3502806 4121434 S18-3017 47-89984 S18-3217 46-96148A5 150 4121435 4868647 S18-3017 47-89984 S18-3217 46-96148A5 S18-3314 46-96148A5 S18-3316 V 150 A904645 & below S18-3017 47-89984 S18-3217 V 150 A904646 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3319 V 175 6618750 & below S18-3017 47-89984 S18-3217 46-96148A5 S18-3316 V 175 6618751 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3319 V 200 6625220 & below S18-3017 47-89984 S18-3217 46-96148A5 S18-3316 V 200 6625221 on S18-3017 47-89984 S18-3217 46-96148A5 S18-3319 V 200 DFI (3.0L) OG 38496 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 V 220 ALL S18-3017 47-89984 S18-3217 46-96148A5 S18-3319 V 225 ALL S18-3017 47-89984 S18-3217 46-96148A5 S18-3316 V 225 (3.0L) CARB & EFI OD280813 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 V 225 DFI OD590000 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 V 250 (3.0L) EFI OG129222 on S18-3056 47-43026-2 S18-3214 47-43026T6/8/11 XR4/Magnum II ALL S18-3017 47-89984 S18-3217 46-96148A5 S18-3319

4. Water pump kit with top housing only.

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

395

section

速 Mariner Serial Number Sierra Impeller OEM Part Sierra Impeller Sierra OEM Part Models Beginning no. Ending no. Number Repair Kit Water Pump Kit Number (BLA Code) (BLA Code) (BLA Code) 2A 646-000000 on S18-3072 47-80395M 2B 6A1-000000 on S18-3072 47-80395M 4A 6E0-000000 on S18-3073 47-96305M 5C 6E3-000000 on S18-3073 47-96305M 6C 6H8-000000 on S18-3066 47-11590M 6D 6H6-000000 on S18-3066 47-11590M 8A (M) 655-000000 655-000300 S18-3063 47-95611M 8A (ML) 655-000000 655-300101 S18-3063 47-95611M 8B (M) 677-000101 on S18-3063 47-95611M 8B (ML) 677-300101 on S18-3063 47-95611M 8C 661-000000 on S18-3066 47-11590M 9.9C 682-000000 on S18-3074 47-84027M/T S18-3148 46-84277M/T 15A (M) 651-000285 & below S18-3063 47-95611M 15A (ML) 651-300100 & below S18-3063 47-95611M 15c 684-000000 on S18-3074 47-84027M/T S18-3148 46-84277M/T 20C (M) 6A9-000101 6A9-005810 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 20C (ML) 6A9-300101 6A9-306542 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 20C (E) 6A9-250101 6A9-250819 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 20C (EL) 6A9-550101 6A9-550693 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 20C (M) 6A9-010112 on S18-3067 47-84797M S18-3427 46-95611M 20C (ML) 6A9-306543 on S18-3067 47-84797M S18-3427 46-95611M 20C (E) 6A9-250820 on S18-3067 47-84797M S18-3427 46-95611M 20C (EL) 6A9-550694 on S18-3067 47-84797M S18-3427 46-95611M 25C (M) 695-000101 695-014870 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 25C (ML) 695-000000 695-312185 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 25C (E) 695-000000 695-252290 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 25C (EL) 695-000000 695-553575 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 25C (M) 695-014871 on S18-3067 47-84797M S18-3427 46-95611M 25C (ML) 695-312186 on S18-3067 47-84797M S18-3427 46-95611M 25C (E) 695-252291 on S18-3067 47-84797M S18-3427 46-95611M 25C (EL) 695-553576 on S18-6067 47-84797M S18-3427 46-95611M 28 664-000000 on S18-3067 47-84797M 30 689-000000 on S18-3067 47-84797M 30A (M) 689-000366 689-014805 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 30A (ML) 689-301911 689-315315 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 30A (E) 689-100251 689-103275 S18-3067 47-84797M S18-3426 46-42431M, 97793M/T 30A (EL) 689-401216 689-407815 S18-3067 47-84797M S18-3426 46-42451M, 97793M/T 30A (M) 689-022059 on S18-3067 47-84797M S18-3427 46-95611M 30A (ML) 689-321377 on S18-3067 47-84797M S18-3427 46-95611M 30A (E) 689-105325 on S18-3067 47-84797M S18-3427 46-95611M 30A (EL) 689-411947 on S18-3067 47-84797M S18-3427 46-95611M 48/48W 670-000000 on S18-3069 47-81423M, 97108M S18-3425 46-84188M/T 55/W55 663-000000 on S18-3069 47-81423M, 97108M S18-3425 46-84188M/T 60 675-6F0-000000 on S18-3069 47-81423M, 97108M S18-3425 46-84188M/T

Outboard, Fuel Fittings & PROPELLERS

396

MARINER Reference Guide

Suzuki速 Water Pump Impellers Replacement impellers manufactured to OEM specifications to suit various models. Refer to detailed application guide on page 398.

S18-3000

S18-3023

S18-3049

S18-3094

S18-3095

S18-3096

S18-3097

S18-3099

Quality marine equipment

S18-3092

S18-3035

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

Water Pump Repair Kits

21 20

- Suzuki速

Replacement water pump kits manufactured to OEM specifications to suit various models. Refer to detailed application guide on page 398.

S18-3253

S18-3256

S18-3259

S18-3266

S18-3243

S18-3244

S18-3254

S18-3255

S18-3257

S18-3258

S18-3260

Outboard, Fuel Fittings & PROPELLERS

S18-3242

S18-3264

S18-3267

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

397

section

Outboard, Fuel Fittings & PROPELLERS

SUZUKI速 Reference Guide HP/Model Year Sierra Impeller OEM Part Sierra Impeller Number Repair Kit (BLA Code) (BLA Code)

DT4 DF4 DT5 DT5 DT6 DF6 DT8 DF8 DT8C DT9.9 DT9.9 DT9.9 DT9.9C DF9.9 DT14 DT15 DT15 DF15 DT15C DT16 DT20 DT25 DT25 DT25C DF25 DT30 DT30C DF30 DT35 DT35 DT40 DT40/DT40C PU40 (JET) DF40 DT50 DT50 DT50M DT55 PU55 (JET) DF50 DT60 DT60 DF60/70 DT65 DT65 DT75 DF80 DT85 DT85 PU85 (JET) DF90/100 DF90/115/140 DT115/140 DT150/200 DF150 DF175 DF200 DF200 DF225 DF250 DF300

Sierra Pump Kit Without Housing (BLA Code)

1984-98 S18-3097 17461-98501/02 S18-3260 2002-10 S18-3266 1977-83 S18-3097 17461-98501/02 1999-02 S18-3097 17461-98501/02 S18-3260 1984-02 S18-3097 17461-98501/02 S18-3259 2002-10 S18-3266 1980-97 S18-3097 17461-98501/02 S18-3259 2001-10 S18-3099 17461-93901/02/03 S18-3256 1988-97 S18-3000 17461-92D02 S18-3255 1977-82 S18-3092 17461-93001/03 1983-97 S18-3099 17461-93901/02/03 S18-3256 1985-87 S18-3099 17461-93901/02/03 S18-3256 1988-97 S18-3000 17461-92D02 S18-3255 2001-10 S18-3099 17461-93901/02/03 S18-3256 1977-80 S18-3092 17461-93001/03 1983-88 S18-3099 17461-93901/02/03 S18-3256 1989-97 S18-3099 17461-93901/02/03 S18-3256 2001-10 S18-3099 17461-93901/02/03 S18-3256 1989-97 S18-3099 17461-93901/02/03 S18-3256 1977-82 S18-3092 17461-93001/03 1986-88 S18-3096 17461-96301/11 S18-3242 1980-82 S18-3092 17461-93001/03 1983-88 S18-3096 17461-96301/11 S18-3242 1989-95 S18-3096 17461-96301/11 S18-3242 2000-09 S18-3096 17461-96301/11 1983-87 S18-3096 17461-96301/11 S18-3242 1988-95 S18-3096 17461-96301/11 S18-3242 2000-09 S18-3096 17461-96301/11 1980-82 S18-3094 17461-94700 1987-89 S18-3096 17461-96301/11 S18-3242 1980-83 S18-3094 17461-94700 1984-95 S18-3096 17461-96301/11 S18-3242 1989-94 S18-3096 17461-96301/11 2001-09 S18-3096 17461-96301/11 1984 & below S18-3094 17461-94700 1984 S18-3095 17461-95300/01 1980-84 S18-3094 17461-94700 1985-95 S18-3094 17461-94700 S18-3243 1989-94 S18-3094 17461-94700 1998-09 S18-3049 17461-87E11 S18-3254 1983 S18-3094 17461-94700 1984 S18-3096 17461-96301/11 2001-09 S18-3049 17461-87E11 S18-3254 1982 & below S18-3094 17461-94700 1985-95 S18-3094 17461-94700 S18-3243 1983-95 S18-3095 17461-95300/01 S18-3244 2009-10 S18-3049 17461-87E11 S18-3254 1980-95 S18-3095 17461-95300/01 S18-3244 1980-97 S18-3095 17461-95300/01 1989-97 S18-3095 17461-95300/01 1989-01 S18-3049 17461-87E11 S18-3258 2001-10 S18-3023 17461-90J00 S18-3258 1983-01 S18-3023 17461-90J00 S18-3257 1986 on S18-3023 17461-90J00 S18-3253 2001-10 S18-3023 17461-90J000 S18-3264 2001-10 S18-3023 17461-90J00 S18-3264 2001-03 S18-3023 17461-90J00 S18-3264 2004-10 S18-3035 17461-93J00 S18-3264 2004-10 S18-3035 17461-93J00 S18-3264 2004-10 S18-3035 17461-93J00 S18-3264 2007-10 S18-3035 17461-93J00 S18-3267

OEM Part Number

17400-98652/61 17400-98661 17400-98652/61 17400-98551 17400-98661 17400-98551 17400-93951 17400-92D01 17400-93951 17400-93951 17400-92D01 17400-93951 17400-93951 17400-93951 17400-93951 17400-93951 17400-96350/51 17400-96350/51 17400-96350/51 17400-96350/51 17400-96350/51 17400-96350/51 17400-96350/51

17400-94700 17400-87E03 17400-87E03 17400-94700 17400-95550 17400-87E03 17400-95550 17400-90511 17400-90511 17400-94611 17400-87D01 17400-93J01 17400-93J01 17400-93J01 17400-93J01 17400-93J01 17400-93J01 17400-98J01

Pa r t s a n d L a b o u r Wa r r a n t y 398

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Water Pump Impellers - Chrysler速/Force速 Replacement water pump impellers manufactured to OEM specifications to suit various models. Refer to detailed application guide on page 400.

S18-3062

S18-3030

S18-3056

S18-3057

S18-3084

S18-3085

S18-8900

S18-8901

S18-8903

Water Pump Repair Kits - Chrysler速/Force速 Replacement water pump repair kits manufactured to OEM specifications to suit various models. Refer to detailed application guide on page 400.

S18-3214

S18-3240

Outboard, Fuel Fittings & PROPELLERS

S18-3017

S18-3215

S18-3251

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

399

section

Outboard, Fuel Fittings & PROPELLERS

400

速速 HP/Model Year Sierra Number Sierra Impeller OEM Part Sierra impeller Number Repair Kit (BLA Code) (BLA Code)

CHRYSLER /FORCE Reference Guide

ALL E288600-E344999 ALL ALL ALL ALL ALL ALL E12770-E344999 ALL ALL ALL E093700-E369299 ALL E138600-E345999 ALL ALL E138600-E345999 E345000 on ALL A,B,C E000001-E093699 E093700 on ALL ALL ALL ALL E000001-E093699 E093700 on ALL ALL ALL ALL E065371 & below E00001-E093699

9.9 1979-97 9.9/15 (1) 1998 10 1974-78 12 1979 15 1974-97 20 1973-78 20 1979-82 25 1973-78 25 1996-98 30 1980-82 35 1976-78, 83-84, 86-88 35 1979-82 40/50 1995-99 70 1979-80 70 1991-95 75 1979 75 1980 75 1996-98 75 1999 85 1977-89 85 & 90 L-Drive 1989-91 90 1990-94 90 1995-97 100 1979-80 105 1977-78 115 1977-80 120/135 1977 120 1990-94 120 1995-97 120 L-Drive 1990-92 125 1981-89 125 L-Drive 1989 140 1978-80 150 1989-92 150 1993 on

S18-8903 S18-3062 S18-8903 S18-8903 S18-8903 S18-8903 S18-8901 S18-8903 S18-3057 S18-8901 S18-8901 S18-3084 S18-3057 S18-3085 S18-8900 S18-3085 S18-3030 S18-8900 S18-3056 S18-3030 S18-3017 S18-3017 S18-3056 S18-3030 S18-3030 S18-3030 S18-3030 S18-3017 S18-3056 S18-3017 S18-3030 S18-3017 S18-3030 S18-3017 S18-3017

47-F 436065-2 S18-3240 47-42038-2 47-F 436065-2 S18-3240 47-F 436065-2 S18-3240 47-F 436065-2 S18-3240 47-F 436065-2 S18-3240 47-F 462065 47-F 436065-2 S18-3240 47-85089-3 S18-3215 47-F 462065 47-F 462065 47-F 40065-2 47-85089-3 S18-3215 47-F 84065 47-19453 47-F 84065 47-803630T, F 523065/-1 47-19453 47-85089-3 S18-3214 47-803630T, F 523065/-1 47-F 694065, 47-803631T S18-3251 47-F 694065, 47-803631T S18-3251 47-43026-2 S18-3214 47-803630T, F 523065/-1 47-803630T, F 523065/-1 47-803630T, F 523065/-1 47-803630T, F 523065/-1 47-F 694065, 47-803631T S18-3251 47-43026-2 S18-3214 47-F 694065, 47-803631T S18-3251 47-803630T, F 523065/-1 47-F 694065, 47-803631T S18-3251 47-803630T, F 5230651/-1 47-F 694065, 47-803631T S18-3251 47-F 694065, 47-803631T S18-3251

1. Mercury lower unit

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

Water Pump Impellers

21 20

- Honda速

Replacement water pump impellers manufactured to OEM specifications to suit various models.

S18-3056

S18-3100 S18-3245

S18-3246

S18-3247

S18-3248

BLA Code

Replaces OEM Part Number

Suits Motor Models

S18-3031 S18-3056 S18-3100 S18-3245 S18-3246 S18-3247 S18-3248 S18-3249 S18-3250

19210-ZY3-003 19210-ZW1-003 19210-ZW9-003/013 19210-881-A01/A02 19210-ZV4-013 19210-ZV4-651 19210-ZV5-003 19210-ZV7-003 19210-ZW1-B04

BF135-225 75-90HP (UP to 1998 with Mercury gearcase) BF8D/9.9D short & long shaft 5, 7.5, 8 & 10HP BF9.9, BF15, AH, AK, AM & AW Series #14ZV40M 8, 9.9, 15HP 35, 40, 45 & 50HP 20, 25, 30HP 75, 90, 115 & 130HP (1999 UP with Honda gearcase)

S18-3249

S18-3250

Water Pump Repair Kits - Honda速 Replacement water pump repair kits manufactured to OEM specifications to suit various models.

S18-3278

S18-3279

S18-3280

S18-3281

S18-3282

S18-3214

S18-3283

Outboard, Fuel Fittings & PROPELLERS

S18-3031

S18-3285

BLA Code

Replaces OEM Part number

Suits Motor Models

BLA Code

S18-3278 S18-3279 S18-3280 S18-3281 S18-3282

06192-ZV1-C00 06192-881-C00 06192-ZV4-000 06192-ZV7-000 06192-ZV5-003

BF5 BF8A (USA) BF9.9A/BF15A BF25-30 BF35-45, BF40-50

S18-3214 19210-ZW1-003 S18-3283 06192-ZW1-000 S18-3284 06192-ZY6-000 S18-3285 06192-ZY3-000

Replaces OEM Part number

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

Suits Motor Models BF70-90 1996-98 with Mercury gearcase BF75/90, BF115/130 1999 on BF135/BF150 BF200-225

www.bla.com.au

401

section

Water Pump Impellers

- Yamaha速

Outboard, Fuel Fittings & PROPELLERS

Replacement water pump impellers manufactured to OEM specifications to suit various models. Refer to detailed application guides on pages 405 & 406.

402

S18-3040

S18-3066

S18-3070

S18-3074

Quality marine equipment

S18-3042

S18-3067

S18-3071

S18-3088

S18-3063

S18-3068

S18-3072

S18-3065

S18-3069

S18-3073

S18-8910

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

Water pump Repair Kits

21 20

- Yamaha速

Replacement water pump repair kits manufactured to OEM specifications to suit various models. Refer to detailed application guide on pages 405 & 406.

S18-3310

S18-3311

S18-3312

S18-3313

S18-3370

S18-3371

S18-3372

S18-3373

S18-3374

S18-3375

S18-3395

Outboard, Fuel Fittings & PROPELLERS

S18-3148

S18-3396

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

403

section

Water pump Repair Kits - Yamaha速

Outboard, Fuel Fittings & PROPELLERS

Replacement water pump repair kits manufactured to OEM specifications to suit various models. Refer to detailed application guide on pages 405 & 406.

404

S18-3397

S18-3398

S18-3425

S18-3426

S18-3427

S18-3428-1

S18-3429

S18-3430

S18-3431

S18-3432

S18-3433

S18-3434

S18-3440

S18-3450

S18-3451

S18-3460

S18-3462

S18-3463

Quality marine equipment

S18-3464 S18-3465 N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

速

yamaha Reference Guide Sierra Water OEM Part Pump Repair Kit Number Without Housing BLA Code

Sierra Water Pump Kit With Housing BLA Code

OEM Part Number

1984-02

S18-3072

646-44352-01-00

S18-3463

6A1-W0078-01-00

1998-10

S18-3072

646-44352-01-00

S18-3462

6A1-W0078-02-00

1984-98

S18-3073

6E0-44352-00-00

1984-02

S18-3073

6E0-44352-00-00

1986-10

S18-3066

6G1-44352-00-00

S18-3460

6G1-W0078-A1

2001-10

S18-8910

68T-44352-00-00

S18-3450

68T-Q0078-00-00

1984-10

S18-3066

6G1-44352-00-00

S18-3460

6G1-W0078-A1

2001-10

S18-8910

68T-44352-00-00

S18-3450

68T-Q0078-00-00

2001-02

S18-3040

63V-44352-01-00

9.9

1984-90

S18-3074

682-44352-01-00

9.9/15

1984-95

S18-3074

682-44352-01-00

S18-3148

682-W0078-A1-00

9.9

1996-10

S18-3040

63V-44352-01-00

S18-3433

63V-W0078-01-00

F & FT9.9

1985-90

S18-3074

682-44352-01-00

S18-3148

682-W0078-A1-00

T9.9

1991-96

S18-3074

682-44352-01-00

S18-3148

682-W0078-A1-00

1984-95

S18-3074

682-44352-01-00

15 & F15

1996-10

S18-3040

63V-44352-01-00

S18-3433

63V-W0078-01-00

20 (1)

1996-10

S18-3065

6L2-44352-00-00

S18-3431

6L2-W0078-00-00

25 (1)

1984-85

S18-3067

689-44352-02-00

S18-3426

689-W0078-04-00

25 (1)

1986-87

S18-3067

689-44352-02-00

S18-3427

689-W0078-A6-00

25 (1)

1988-02

S18-3065

6L2-44352-00-00

25 (2)

1996-02

S18-3068

6H4-44352-00-00

C25

1990-97

S18-3067

689-44352-02-00

S18-3427

689-W0078-A6-00

CV25

1990

S18-3067

689-44352-02-00

S18-3427

689-W0078-A6-00

F25

1998-09

S18-3068

6H4-44352-00-00

S18-3432

61N-W0078-11-00

T25

2001-04

S18-3068

6H4-44352-00-00

S18-3440

66T-W0078-00-00

30 (1)

1984-85

S18-3067

689-44352-02-00

S18-3426

689-W0078-04-00

30 (1)

1986

S18-3067

689-44352-02-00

S18-3427

689-W0078-A6-00

1987-95

S18-3068

6H4-44352-00-00

C30

1990-92

S18-3067

689-44352-02-00

S18-3427

689-W0078-A6-00

CV30

1993-09

S18-3068

6H4-44352-00-00

S18-3432

61N-W0078-11-00

F30 (2)

2001-04

S18-3068

6H4-44352-00-00

S18-3440

66T-W0078-00-00

1984-94

S18-3068

6H4-44352-00-00

S18-3434

63D-W0078-01-00

S18-3431

S18-3430

S18-3429

6L2-W0078-00-00

6J8-W0078-A1-00

6H4-W0078-00-00

1995-10

S18-3069

6H3-44352-00-00

C40

1992-97

S18-3088

6F5-44352-00-00

S18-3397

679-W0078-00-00

S18-3398

6F5-W0078-A0-00

C40 (2)

1997-02

S18-3069

6H3-44352-00-00

S18-3434

63D-W0078-01-00

CV40

1990-91

S18-3088

6F5-44352-00-00

S18-3374

6F5-W0078-00-00

S18-3375

F40 (3)

1999

S18-3069

6H3-44352-00-00

F40 (2)

2000-10

S18-3068

6H4-44352-00-00

S18-3440

66T-W0078-00-00

F40

1998

S18-3069

6H3-44352-00-00

S18-3434

63D-W0078-01-00

1984-94

S18-3068

6H4-44352-00-00

1995-04

S18-3069

6H3-44352-00-00

S18-3429

S18-3434

63D-W0078-01-00

C50

1999-01

S18-3069

6H3-44352-00-00

S18-3434

63D-W0078-01-00

F50

1999-10

S18-3069

6H3-44352-00-00

S18-3434

63D-W0078-01-00

PRO 50

1987-94

S18-3068

6H4-44352-00-00

S18-3429

6H4-W0078-00-00

P50

1991-93

S18-3068

6H4-44352-00-00

S18-3429

6H4-W0078-00-00

P50

1995-96

S18-3069

6H3-44352-00-00

50 JET

1986-89

S18-3068

6H4-44352-00-00

T50

1996

S18-3069

6H3-44352-00-00

S18-3428-1

T50

1997-06

S18-3069

6H3-44352-00-00

S18-3465

6H-W0078-02-00

C55

1991-94

S18-3069

6H3-44352-00-00

S18-3425

663-W0078-00-00

CV55

1989

S18-3069

6H3-44352-00-00

S18-3425

663-W0078-00-00

2001-03

S18-3069

6H3-44352-00-00

S18-3465

663-W0078-00-00

C60

1996-01

S18-3069

6H3-44352-00-00

S18-3465

663-W0078-00-00

E60

1995-00

S18-3069

6H3-44352-00-00

S18-3464

F60

2002-10

S18-3069

6H3-44352-00-00

S18-3434

63D-W0078-01-00

P60

1991

S18-3069

6H3-44352-00-00

S18-3428-1

6H3-W0078-00-00

P60

1992-99

S18-3069

6H3-44352-00-00

S18-3465

663-W0078-00-00

T60

2003-05

S18-3069

6H3-44352-00-00

S18-3465

1984-91

S18-3069

6H3-44352-00-00

S18-3428-1

6H3-W0078-00-00

1992-03

S18-3069

6H3-44352-00-00

S18-3465

663-W0078-00-00

C75

1994-99

S18-3070

688-44352-03-00

S18-3370

692-W0078-00-00

E75

1995-00

S18-3070

688-44352-03-00 S18-3451

67F-W0078-00-00

6H4-W0078-00-00

S18-3434

63D-W0078-01-00

6H3-W0078-00-00

Outboard, Fuel Fittings & PROPELLERS

Engine Model Year Sierra Water OEM Part Horsepower Impeller Number BLA Code

663-W0078-00-00

F75

2003-10

S18-3042

67F-44352-00-00

P75

1996-99

S18-3070

688-44352-03-00

C80

1997

S18-3070

688-44352-03-00

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

S18-3371

692-W0078-A0-00

www.bla.com.au

405

section

Outboard, Fuel Fittings & PROPELLERS

yamaha速 Reference Guide Engine Model Year Sierra Water OEM Part Horsepower Impeller Number BLA Code

Sierra Water Pump Kit

OEM Part Number

BLA Code

C85 & CV85

1985-97

S18-3070

688-44352-03-00

S18-3370 692-W0078-00-00 & 01-00 & A0-00 S18-3371

F80

1999-10

S18-3042

67F-44352-00-00

S18-3451

67F-W0078-00-00

1984-02

S18-3070

688-44352-03-00

S18-3370

692-W0078-00-00

90 JET

1986-89

S18-3070

688-44352-03-00

C90

1997-01

S18-3070

688-44352-03-00

B90

1997-99

S18-3070

688-44352-03-00

F90

2003-10

S18-3042

67F-44352-00-00

S18-3451

67F-W0078-00-00

F100

1999-10

S18-3042

67F-44352-00-00

S18-3451

67F-W0078-00-00

F115/LF115

1998-10

S18-3071

6E5-44352-00-00

S18-3312

C115

1991-92

S18-3071

6E5-44352-00-00

C115

1993-96

S18-3071

6E5-44352-00-00

P115 (62A)

692-W0078-A0-00

S18-3371

692-W0078-A0-00

6N6-W0078-00-00

S18-3313

6N6-W0078-01-00

S18-3372

6E5-W0078-01-00

S18-3373

6E5-W0078-A1-00

S18-3312

6N6-W0078-00-00

S18-3313

6N6-W0078-01-00 6N6-W0078-01-00

1993-96

S18-3071

6E5-44352-00-00

S18-3312

6N6-W0078-00-00

S18-3313

1989-94

S18-3071

6E5-44352-00-00

S18-3372

6E5-W0078-01-00

S18-3373

6E5-W0078-A1-00

1994

S18-3071

6E5-44352-00-00

S18-3312

6N6-W0078-00-00

S18-3313

6N6-W0078-01-00

130 (6L1), (6N7)

1988-92

S18-3071

6E5-44352-00-00

S18-3372

6E5-W0078-01-00

S18-3373

6E5-W0078-A1-00

1993-96

S18-3071

6E5-44352-00-00

S18-3312

6N6-W0078-00-00

S18-3313

6N6-W0078-01-00

L130 (6L6), (6N4)

1989-92

S18-3071

6E5-44352-00-00

S18-3372

6E5-W0078-01-00

S18-3373

6E5-W0078-A1-00

L130 (6N4)

1993-96

S18-3071

6E5-44352-00-00

S18-3312

6N6-W0078-00-00

S18-3313

6N6-W0078-01-00

C150 (6E5)

6G5-W0078-A1-00

115 (6N6), (6E5)

115 (6N6) 130 (6N7)

1994

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

L150 (6R0), (6K0)

1986-91

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

1992-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

1984-91

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

L150 (6R0)

150 (6R2), (6G4)

150 (6R2)

1992-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

P150

1986-91

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

P150

1992-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

150/175/200ETLN

1984

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

PRO V150 (6J9)

1986-89

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

PRO V150D (6N9)

1990

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

PX150

1999

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

SX150

1999-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

V150

2000-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

VZ150

2001-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

Z150/LZ150

2001-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

F150

2002-09

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

175 (6G5)

1984-91

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

175 (6R3)

1992-00

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

P175 (62H)

1994-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

VZ175

2001-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

Z175

2001-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

F175

200 (6G6), (6R4)

2002-09

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

1984-91

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

200 (6R4)

1992-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

F200/LF200

2002-09

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

L200 (6K1), (6R1)

1986-91

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

L200

1992-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

LX200

1999-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

P200

1991-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

SX200

1999-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

V200

1998-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

VZ200

2001-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

Z200/LZ200

2000-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

V6 Special (6G7)

1984-86

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

V6 Excel (6K7)

1987-89

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

225 (6R5)

1990-91

S18-3071

6E5-44352-00-00

S18-3310

6G5-W0078-01-00

S18-3311

6G5-W0078-A1-00

225 (1)

1992-97

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

225/L225/S225 (2)

1994-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

F225/LF225

2002-09

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

LX225/SX225

2000-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

V225

1998-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

VX225

2000-02

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

250/L250

1990-96

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

L250/S250

1997-99

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

VX250

2002

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

F250

2002-09

S18-3071

6E5-44352-00-00

S18-3395

61A-W0078-01-00

S18-3396

61A-W0078-A2-00

1. 2.6L engine

406

Sierra Water OEM Part Pump Repair Kit Number Without Housing BLA Code

2. 3.1L engine

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

Water Pump Impellers

21 20

- Tohatsu速

Replacement water pump impeller manufactured to OEM specifications, to suit the models listed in the table below.

S18-8923

BLA Code

Replaces OEM Part Number

S18-8920 3B2-65021-1 S18-8921 334-65021-0 S18-8922 3C8-65021-2 S18-8923 345-65021-0 S18-8924 3C7-65021-1, -2

S18-8922

S18-8921

S18-8924

Suit Motor Models 8 (8B models), 9.8 (9.8B model), 8 4-stroke (All), 9.8 4-stroke (All) 9.9 (All), 15 (All), 18 (All), 9.9 4-stroke (All B models), 15 4-stroke (All B models), 18 4-stroke (All) 40 3-cyl (D modes), 40 TLDI 2-stroke (All) 50 3-cyl (D models), 50 TLDI, 70 TLDI & 90 TLDI (All) 25 (25C model), 25 4-stroke (All A&B models with white bushing), 30 (30A model), 30 4-stroke (All A&B models with white bushing) 40 2-cyl (40C model) 60 3-cyl (B&C models), 70 3-cyl (B&C models), MD 70, MD 90 TLDI, 115, 150, 90 2-stroke

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

www.bla.com.au

Outboard, Fuel Fittings & PROPELLERS

S18-8920

407

section

Outboard, Fuel Fittings & PROPELLERS

408

SELOC® Engine Manuals SELOC® Repair manuals for all types of motors. Recognised throughout the trade as being exceptionally well written. Features exploded pictures and drawings of mechanical and electrical parts as well as wiring diagrams for electrical trouble shooting. Step by step removal and replacement instructions and repair tips make these manuals essential references, for mechanics, home or professional.

BLA Code

Description

S18-01000 S18-01100 S18-01200 S18-01300 S18-01301 S18-01302 S18-01308 S18-01311 S18-01312 S18-01402 S18-01404 S18-01406 S18-01408 S18-01416 S18-01418 S18-01600 S18-01701 S18-01703 S18-01705 S18-03200 S18-03206 S18-03400 S18-03404 S18-03600 S18-03602 S18-03606 S18-07400 S18-09002 S18-09200 S18-09400 S18-09600

Chrysler® Outboards, 3.5-150HP, 1-4 Cyl, 1962-84 Force® Outboards, 3.5-150HP, 1-5 Cyl, 1984-99 Honda® Outboards, 2-130HP, 1-4 Cyl, 1978-2001 Johnson®/Evinrude® Outboards, 1.5-40HP, 1 & 2 Cyl, 1956-70 Johnson®/Evinrude® Outboards, 50-125HP 1958-72 Johnson®/Evinrude® Outboards, 1.5-60HP, 1 & 2 Cyl, 1971-89 Johnson®/Evinrude® Outboards, 60-235HP, 3 Cyl, V4 & V6, 1973-91 Johnson®/Evinrude® Outboards, 65-300HP, V4, V6 & V8, 1992-01 Johnson®/Evinrude® Outboards, 1.5-70HP, 2 & 4 Stroke, 1990-01 Mariner® Outboards, 3, 4 inline 6 Cyl, V6 & EFI, 1977-89 Mercury® Outboards, 2-40HP, 1 & 2 Cyl, 1965-89 Mercury® Outboards, 40-115HP, 3 & 4 Cyl, 1965-89 Mercury® Outboards, 90-300HP, inline 6 Cyl, V6, EFI, 1965-89 Mercury®/Mariner® Outboards, 2.5-275HP, 1-4 Cyl & V6, 2 stroke, 1990-00 Mercury® Outboards, 2.5-250HP, 2001-05 Suzuki® Outboards, 2.5-225HP, 1-4 Cyl, V4 & V6, EFI, 1988-03 Yamaha® Outboards, 2-250HP, 1-4 Cyl, V4 & V6, 2 & 4 Stroke, 1984-96 Yamaha® Outboards, 2-250HP, 1-4 Cyl, V4 & V6, 2 Stroke, 1997-03 Yamaha®, Mercury®, Mariner® Outboards, 2.5-225HP, 4 Stroke, 1995-04 Mercruiser® Stern Drive, Type 1, Alpha/MR, Bravo I & II, with Ford/GM 4, 6 inline, V6 & V8, 1964-91 Mercruiser® Stern Drive, All Engines, Drives & Transmissions, 1992-01 OMC® Stern Drive, with Ford/GM 4 Cyl, Volvo 4 Cyl motors, V6 & V8 Motors, 1964-86 OMC® Cobra Stern Drive, With Ford/GM 4 Cyl, Volvo 4 Cyl Motors, V6 & V8 Motors, 1985-98 Volvo® Penta Stern Drives, with Volvo 4 Cyl Motors, 1968-91 Volvo® Penta Stern Drives, With Volvo® 4 Cyl Motors, 1992-93 Volvo Penta Stern Drives, All Petrol Engines, 1992-03 Yanmar® Inboards, QM, GM Petrol, HM, JH & JH2 diesel models, 1975-98 Sea-Doo®/Bombardier®, GS, GSI, GSX, GTI, GTS, GTX, HX, SP, SPI, SPX & XP models, 1992-97 Kawasaki® PWC 300-650 Series, 1973-91 Polaris® PWC 650-1050 Series, 1992-97 Yamaha®, Jet-n-Cat & other Cuyuna powered PWC’s, 1987-91

Quality marine equipment

N.B. T he Sierra products (red part numbers) are not distributed by BLA in New Zealand. Please contact Outboard Marine Technologies - 09 263 6000

section section

21 20

Turning Point Propellers

Utilising Turning Point’s exclusive, interchangeable MasterGuard® and MasterTorqueTM Hub system, the end user is able to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities. The MasterGuard® and MasterTorqueTM Hub design utilises shock and vibration absorbing polymers for unmatched dependability. The MasterGuard® Hub system adapts to Turning Point's Rascal®, Hustler®, and Express® propellers lines.

Improves hydrodynamic efficiency.

Ensures Durability Brass tabs reinforce the cushion structure. Will not corrode.

Heavy Duty Spacer Adapts to all OEM thrust washers

Maximum Exhaust Flow and Higher Horsepower Hub diameter is among the smallest in the industry. Hi-tech polymer cushion material absorbs damaging shift shock and vibrations.

Progressive Pitch

Vent Holes Enhenced hole shot performance and quicker planing power.

Smaller Hub Diameter Allows for increased exhaust flow and more horsepower.

Secure Fit Tapered keyways match with tapered keys inside the prop.

The MasterTorqueTM Hub system is a compatible upgrade to Mercury® Flo-Torq® and to other "square" hub systems. MasterTorqueTM is offered in our Patriot and Voyager propeller lines. Shock absorbing hi-tech polymer cushion Absorbs damaging shift shock and vibrations

Reinforced for dependability Ensure trouble free boating.

Innovative one-piece design Easy to install and eliminates clutch rattling

Solid brass spindle Will not corrode

Selecting the correct propeller

High Rake Reduces ventilation and cavitation. Improves holding at higher trim angles. Better thrust efficiency and higher top speeds.

Aggressive Cupping Delivers greater lift for higher speeds, reduced drag and more efficient planing, greater fuel economy, better handling in wide open throttle turns.

Wide Open Throttle (WOT) RPM range: 1. Check the engine manual for the motor’s WOT RPM range. Running at WOT the boat should ideally be running at the upper end of the rev. range for maximum performance. Water sports or additional people on board may require a drop in pitch to meet WOT requirements. For every 2" change in prop pitch the RPM will change approximately 400 RPM. Compare the RPM that the engine is currently running at WOT against the suggested WOT RPM range to determine if a pitch change is necessary. (Wide Open Throttle R.P.M range chart on page 429-432) Cross reference a Turning Point propeller: 2. To cross reference your current propeller by manufacturer’s part number to a Turning Point propeller, refer to the cross reference charts on pages 424-429. Find the correct propeller pitch: 3. Follow the instructions in step 1 and use the propeller selection charts detailed on pages 412-423. A complete propeller consists of a choice of propeller housing and a hub-kit to suit the type and model of the motor. These two parts are purchased separately.

Turning Point Propeller Range

Outboard, Fuel Fittings & PROPELLERS

The propeller is ultimately the determining factor in achieving a boat and motor combinations optimum performance. Turning Point Propellers offer a range of high performance aluminium and stainless steel propellers that produce increased performance for specific applications over the majority of mass produced factory propellers found standard on many boat and motor packages.

Turning Point produces two ranges of aluminium propellers to suit motors from 6hp-300hp and four ranges of stainless steel propellers to suit motors from 9.9hp-300hp, all designed to maximise performance – run faster, pull harder and handle better. Gets the most power and performance from smaller engines!

Compact Series Aluminium propellers for 6-35hp outboard motors with a 3" gearcase. The Rascal features increased blade surface area and fine tuned cupping with improved geometry to produce great top end speeds and enhanced water grip. Typical OEM and other aftermarket propellers in this size have blade designs that are swept back, limiting grip and creating excess ventilation. Turning Point Rascal series propellers have improved on these designs to provide class leading, all-round performing propellers for smaller horsepower motors.

www.bla.com.au

409

section

A true high performance aluminium propeller!

Outboard, Fuel Fittings & PROPELLERS

Mid-Range Series Aluminium propellers for 40–75hp outboard motors with 3.5" gearcase. Includes the design advantages of the Rascal series with greater blade area and fine tuned cupping to maximise speed, efficiency and overall performance. Ideal for lower horsepower pontoon, fishing and work boats.

High Performance Series Aluminium propellers for 40-300hp motors with 4.25" and 4.75" gearcases. High performance aluminium propellers based on Turning Points Express stainless steel propeller designs to produce high top end speeds, quick out of the hole, greater lift, and secure handling even in tight, wide open throttle turns.

High Performance Four Blade Series New four blade design uniquely engineered with two blade geometries: two blades utilize the Hustler design for incredible hole shot and cornering, and two blades utilize a 'cleaver' style shape for high speed and maximum stern lift. This combination results in producing a high performance aluminium peropeller, unmatched in cornering, acceleration, boat handling, and top speed. This is the ultimate water sports propeller, but also offers any boater four blade performance with none of the usual top speed reductions normal to other designs.

The best all-round stainless steel propeller in the business

High Performance Series Stainless steel propellers for 20-300hp stern drive and outboard motors with 3", 3.5", 4.25" and 4.75" gearcases. The Express range of propellers with high progression of pitch, high rake and aggressive cupping produce maximum speed and secure handling on tight turns at wide open throttle, providing excellent all round performance. They are suited to most applications including general water sports, cruising, inshore and offshore fishing.

For the Go-Fast crowd!

High Performance Sports Series Stainless steel propellers for 120–300+hp stern drive and outboard motors with a 4.75" gearcase. SpeedZone propellers take the next step in high performance to best harness the power of high performance boats. Greater blade area and more aggressive design features deliver optimum acceleration and top end speed. Ideal for high horsepower, shallow bottom, high speed boats.

The best all-round combination of stainless steel propellers in the business

High Performance Series High perfomance stainless steel propellers for runabouts and fishing boats. Available in three and four blade and counter rotation designs. Suits motors 40hp-300hp. Also includes 14" 4 cylinder 4 stroke Suzuki® propellers. This design utilizes the new advanced Master TorqueTM hub system.

The best all-round superior combination of stainless steel propellers in the business

High Performance Series Large diameter propellers for Offshore, Bay, and Cabin Cruiser boats. Available in 3 and 4 blade and counter-rotation designs. Suits motors 135hp-300hp. Also includes Suzuki® specific 16" diameter propellers. This design utilizes the new advanced Master TorqueTM hub system.

410

Quality marine equipment

section section

21 20

Improve handling and boat lift Through advance pitch line and rake line cupping. Squeeze cast for added strength The process generates the highest mechanical properties attainable in a cast product, resulting in tighter grain structures.

Die cast

Squeeze cast

Tuned progressive pitch angles Accelerating and channelling water to minimise slip increases performance and fuel economy. High-flow-through barrel exhaust system Maximising exhaust flow increases horsepower and top-end speed.

Performance tuned rake angles Higher rake angles tighten the vortex produced by the prop, adding to boat lift and overall performance. Long lasting finish – powder coated The 5 step process creates a uniform, durable, high-quality and attractive finish, that protects the aluminium from corrosion. Stainless performance in aluminium Stainless steel blade geometry used in all aluminium patterns. Tuned vents for fast hole shot Stainless steel ventilation technology applied to aluminium Hustler line.

Stainless Steel Design Features Improve handling and boat lift Through advance pitch line and rake line cupping. Tuned progressive pitch angles Accelerating and channelling water to minimise slip increases performance and fuel economy. Tuned vents for fast hole-shot Improve hole-shot with tuned vents.

High-flow-through barrel exhaust system Maximising exhaust flow increases horsepower and top-end speed. Performance tuned rake angles Higher rake angles tighten the vortex produced by the prop, adding to boat lift and overall performance.

Outboard, Fuel Fittings & PROPELLERS

Aluminium Design Features

Compatible with competitor’s hub systems Works with Mercury Flow-Torq and Michigan Wheel XHS hub kit systems (only with Turning Point’s Patriot & Voyager Stainless Steel line).

www.bla.com.au

411

section

Outboard, Fuel Fittings & PROPELLERS

EVINRUDE速/JOHNSON速 SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

Aluminium Propellers 8hp-15hp 2 & 4 strokes with a 2 1/2" gearcase 202148 9x9 3 203202 RH 202152 9 x 10 202148 9x9 3 203206 RH 202152 9 x 10 20hp-30hp 2 & 4 strokes with a 3" gearcase 202112 101/2 x 11 RH 3 202116 101/8 x 13 203022 202136 101/2 x 11 RH 3 202140 101/8 x 13 203026

13 spline shaft 2 stroke: 9.9hp & 15hp (1974 & newer) 4 stroke: 8hp (1996 & newer), 9.9hp & 15 hp (1995-2001) 10 spline shaft 4 stroke: 9.9hp & 15hp (2002 on) 14 spline shaft 2 stroke: 20hp, 25hp (1984 on)/25hp Comm. (1993 on) 30hp (1984 on)/35hp (1976 on) 10 spline shaft 4 stroke: 25hp/30hp

Aluminium Propellers 40hp-75hp 2 & 4 strokes with a 3 1/2" gearcase 202212 121/2 x 8 202216 12 x 101/2 202220 107/8 x 11 RH 3 202224 103/8 x 12 203011 202228 101/2 x 13 3/8 202232 10 x 14 202236 101/8 x 15 202252 121/2 x 8 202256 12 x 101/2 RH 3 202260 123/8 x 13 203012 202264 121/4 x 15 202268 113/4 x 17 50hp-140hp 2 & 4 strokes with a 4 1/4" gearcase 202312 14 x 11 202316 14 x 13 202320 133/4 x 15 RH 3 202324 131/4 x 17 203030 202328 131/4 x 19 202332 131/4 x 21 202336 131/4 x 23 202356 14 x 13 202360 133/4 x 15 202364 131/4 x 17 203030 RH 3 202368 131/4 x 19 202372 131/4 x 21 202376 131/4 x 23 90hp-300hp V4, V6 & V8 with a 4 3/4" gearcase 202412 151/4 x 15 202416 141/4 x 17 RH 3 202420 141/4 x 19 203032 202424 141/4 x 21 1/4 202428 14 x 23 202430 14 x 17 4 202432 203502 14 x 19 RH 202434 14 x 21

13 spline shaft 4 Stroke: DF40/DF50

13 spline shaft 2 cyl: 40hp/48hp50hp (1975 on)/55hp (1976-79)/65hp (1980-85) 3 cyl (with small gearcase): 75hp (1975-85)/Sprint & Formula E

15 spline shaft 4 stroke: DF90/DF115/DF140 Note: Add 2 inches of pitch for OEM replacement when selecting less than 14" dia. propellers. Note: Highly recommend using Patriot 14" dia. stainless steel propellers. 13 spline shaft 2 cyl: 50hp(1971-74)/45-55hp Commercial. 3 cyl: 55hp/60hp/65hp/70hp/75hp (large gearcase)/65hp Comm. 4 cyl: 75hp/85hp/88hp/90hp/100hp/110hp/115hp/120hp (1986-94)/125hp/135hp (1973-76)/140hp (1977-84, 1986-94). V4 Sea Drive: 1.6L & 1.8L, E-Tec: 40hp/50hp/60hp/75hp/90hp. 4 Stroke: DF60/DF70.

15 spline shaft. E-Tec: 90hp (large gearcase). V4 (with V6 large gearcase): 100hp Comm./120hp (1985)/130hp (1995-96)/140hp (1985)/115hp & 130hp Pleasure (1995 on). V6: 135hp-250hp/V6 Sea Drives: 2.0L-3.0L V8: 250hp-300hp/V8 Sea Drives: 3.4L-3.6L

High Performance Stainless Steel Propellers 20hp-30hp 2 & 4 strokes with a 3" gearcase 202440 101/8 x 10 202442 101/8 x 11 202444 101/8 x 12 203022 3 RH 202446 101/8 x 13 202448 101/8 x 14 1/8 202450 10 x 15 202480 101/8 x 10 202482 101/8 x 11 202484 101/8 x 12 203026 3 RH 202486 101/8 x 13 202488 101/8 x 14 1/8 202490 10 x 15 40hp-75hp 2 & 4 strokes with a 3 1/2" gearcase 202508 12 x 9 202510 12 x 11 202512 12 x 13 202502 101/2 x 11 203011 3 RH 202503 101/2 x 12 202504 101/2 x 13 202505 101/2 x 14 202506 101/2 x 15 202546 12 x 9 202548 12 x 11 202550 12 x 13 3 RH 202540 113/4 x 13 203012 202542 113/4 x 15 3/4 202544 11 x 17

14 spline shaft 2 stroke: 20hp, 25hp (1984 on)/25hp Comm. (1993 on) 30hp (1984 on)/35hp (1976 on).

10 spline shaft 4 stroke: 25hp, 30hp

13 spline shaft DF 4 Stroke: 40hp, 50hp

13 spline shaft 2 cyl: 40hp, 48hp, 50hp (1975-05) 55hp (1976-79), 60hp, 65hp (1980-85). 3 cyl (with small gearcase): 75hp (1975-85) Sprint and formula E

RUN FASTER, PULL HARDER, HANDLE BETTER! 412

Quality marine equipment

section section

21 20

Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

High Performance Stainless Steel Propellers 50hp-140hp 2 & 4 strokes with a 4 1/4" gearcase 202514 131/4 x 15 202518 131/4 x 17 203040 3 RH 202522 131/4 x 19 202526 131/4 x 21 202552 131/4 x 15 202556 131/4 x 17 203043 RH 3 202560 131/4 x 19 1/4 202564 13 x 21 90hp-300hp V4, V6 & V8 with a 4 3/4" gearcase 202614 141/4 x 15 202618 141/4 x 17 RH 3 202622 141/4 x 19 203042 202626 141/4 x 21 202630 141/4 x 23

15 spline shaft 4 stroke: DF90/DF115/DF140 Note: Add 2 inches of pitch for OEM replacement when selecting less than 14" Dia. propellers. Note: Highly recommend using Patriot 14" dia. stainless steel propellers. 13 spline shaft. 2 cyl: 50hp (1971-74)/45-55hp Comm. 3cyl: 55hp-70hp/75hp (lge gearcase)/65hp Comm. 4 cyl: 75-115hp/120hp (1986-94)/125hp/135hp (1973-76)/140hp (1977-84, 1986-94) V4 Sea Drive 1.6L & 1.8L E-TEC: 40hp/50hp/60hp/75hp/90hp 4 Stroke: DF60/DF70 15 spline shaft E-TEC: 90hp (large gearcase). V4 (with V6 large gearcase): 100hp Comm./120hp (1985)/130hp (1995-96)/140hp (1985)/115hp & 130hp Pleasure (1995 on). V6: 135hp-250hp/V6 Sea Drives: 2.0L-3.0L. V8: 250hp-300hp/V8 Sea Drives: 3.4L-3.6L

High Performance Sports Stainless Steel Propellers 135hp-300hp with a 4 3/4" gearcase 202652 143/4 x 23 202656 143/4 x 25 203042 202660 143/4 x 27

15 spline shaft V6: 135hp-250hp/V6 Sea Drives: 2.0L-3.0L.V8: 250hp-300hp/V8 Sea Drives: 3.4L-3.6L

High Performance Stainless Steel Propellers 50hp-140hp 2 & 4 strokes with a 4 1/4" gearcase 202762 14 x 11 202764 14 x 13 202752 131/4 x 15 RH 202754 131/4 x 17 203503 3 202756 131/4 x 19 202758

131/4 x 21

90hp-140hp 4 strokes with a 4 1/4" gearcase 202730 14 x 17 203509 202732 14 x 19 3 202734 14 x 21 203501 202736 14 x 23 202742 14 x 17 203509 202744 14 x 19 3 202746 14 x 21 203501 202748 14 x 23 135hp-300hp 2 strokes with a 4 3/4" gearcase 202812 141/4x 17 202814 141/4 x 19 3 202816 141/4 x 21 203502 202818 141/4 x 23 202842 141/4x 17 202844 141/4 x 19 203502 3 202846 141/4 x 21 202848 141/4 x 23 202872 14 x 17 202874 14 x 19 4 203502 202876 14 x 21 202878 14 x 23

13 spline shaft 2 cyl: 50hp (1971-74)/45 to 55hp comm. 3 cyl: 55hp, 60hp, 70hp, 75hp with large gearcase, 65hp comm. 4 cyl: 75hp, 85hp, 88hp, 90hp, 100hp, 110hp, 115hp, 120hp (1986-94), 125hp, 135hp (1973-76), 140hp (1977-84, 1986-94). V4 Sea Drive 1.6L & 1.8L. E-TEC: 40hp, 50hp, 60hp, 75hp, 90hp & 115hp (20 shaft). 4 stroke: 60hp & 70hp

DF 90HP, DF 115HP DF 140HP (Use Hub kit 203501 for motors pre 2008 and use Hub kit 203509 for motors 2008 and above) RH

V4 with V6 large gearcase: 100hp comm. 120hp (1985), 130hp (1985-96), 140hp (1985), 115-130hp Pleasure (1995 on) E-TEC: 90hp & 115hp (25" shaft), 135hp-250h. V6: 135-250hp. V6 sea drives: 2.0-3.0L. V8: 250hp-300hp. V8 sea drives: 3.6-4.0L

High Performance Stainless Steel Propellers 135hp-300hp 2 strokes with a 4 3/4" gearcase 202912 15 x 15 202914 15 x 17 3 203502 202916 15 x 19 202918 15 x 21 202942 15 x 15 202944 15 x 17 3 203502 202946 15 x 19 202948 15 x 21 202972 141/4x 17 202974 141/4x 19 203502 4 202976 141/4x 21 202978 141/4x 23 202988 141/4x 17 202990 141/4x 19 4 202992 141/4x 21 203502 202994 141/4x 23

Outboard, Fuel Fittings & PROPELLERS

EVINRUDE速/JOHNSON速 SELECTION GUIDE

RUN FASTER, PULL HARDER, HANDLE BETTER! www.bla.com.au

413

section

Outboard, Fuel Fittings & PROPELLERS

MERCURY®/MARINER®/MERCRUISER®/FORCE® SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

Aluminium Propellers 6hp-15hp 2 & 4 strokes with a 2 1/2" gearcase 202148 9x9 3 203201 RH 202152 9 x 10 202148 9x9 RH 3 203207 202152 9 x 10

2 stroke: 6hp, 8hp,9.9hp, 15hp. Sea Pro/Maraton 10hp & 15hp. Amercian model: (gearshift in tiller arm + propeller lock nut).

4 Stroke: 9.9hp (1995-04).

14 spline shaft. 2 Stroke: 15hp, 20hp. 4 Stroke: Bigfoot 8hp, 9.9hp (2005 on) 4 Storke: 15hp, 20hp (2007). Japanese (Tohatsu) model: side gear shift lever & prop nut and split pin.

20hp-30hp 2 & 4 strokes with a 3" gearcase 202112 202116

101/2 x 11 101/8 x 13

203021

10 spline shaft. Force®: 25hp (1995-98) Mercury® & Mariner®: 9.9hp-15hp Bigfoot, 18hp (1980-85), 20hp (1986 on), 25hp 2 stroke (1985 on) Amercian model: (gearshift in tiller arm + propeller lock nut).

202124 202128

103/8 x 11 103/8 x 13

203028

10 spline shaft. 25-30hp (2006 on) Japanese (Tohatsu) model: side gear shift lever & prop nut and split pin.

Aluminium Propellers 25hp 4 strokes-75hp with a 3 1/2" gearcase 202212 121/2 x 8 202216 12 x 101/2 202220 107/8 x 11 RH 3 202224 103/4 x 12 203011 202228 101/2 x 13 202232 103/8 x 14 202236 101/8 x 11 40hp Bigfoot–150hp with a 4 1/4" gearcase 202312 14 x 11 202316 14 x 13 202320 131/4 x 15 3 202324 131/4 x 17 203030 RH 202328 131/4 x 19 202332 131/4 x 21 202336 131/4 x 23 135hp-300hp V6 & Stern Drives with 4 3/4" gearcase 202412 151/4 x 15 202416 141/4 x 17 3 202420 141/4 x 19 203031 RH 202424 141/4 x 21 1/4 202428 14 x 23 202430 14 x 17 4 RH 202432 203501 14 x 19 202434 14 x 21

13 spline shaft Force®: 40hp (1995-98), 50hp (1995-98), 70hp (1991-95), 75hp (1996-98) Mercury® & Mariner® 2 Stroke: 30hp (1994 on) 35hp, 40hp, 45hp, 50hp, 55hp, 60hp (1977 on). 70hp (1983 older) 4 Stroke: 25hp Bigfoot. 30hp (1994-05). 40hp-60hp

15 spline shaft Force®: 75hp (1999)/90hp-150hp (1995 on) Mercury® & Mariner®: (2 & 4 stroke) 40hp-60hp Bigfoot. 70hp (1987-89), 75hp, 80hp (1978-89), 90hp, 100hp, 115hp, 125hp, 140hp, 1150XR4/XR6 up to 1993 (includes equivalent Mariner Magnum I, II, III). Mercury/Mariner (1977 and older) not available from Turning Point Propellers Inc.

15 spline shaft Mercury® & Mariner®: V6 135hp-300hp (not for Pro XS), Verado 1355hp-275hp. Mercruiser®: Alpha1, Alpha 1 Gen. II & Bravo1 (1983 on) If propeller strikes trim tab, replace with Mercury part# 822777A1 or 76214AS

High Performance Stainless Steel Propellers 20hp-30hp 2 & 4 strokes with a 3" gearcase 202440 101/8 x 10 202442 101/8 x 11 202444 101/8 x 12 203011 3 202446 101/8 x 13 202448 101/8 x 14 202450 101/8 x 15 202460 101/8 x 10 202462 101/8 x 11 202464 101/8 x 12 203028 3 202466 101/8 x 13 202468 101/8 x 14 1/8 202470 10 x 15 25hp 4 strokes-75hp with a 3 1/2" gearcase 202508 12 x 9 202510 12 x 11 202512 12 x 13 202502 101/2 x 11 203011 3 202503 101/2 x 12 202504 101/2 x 13 202505 101/2 x 14 202506 101/2 x 15 40hp Bigfoot–150hp with a 4 1/4" gearcase 202514 131/4 x 15 202518 131/4 x 17 3 202522 131/4 x 19 203040 202526

10 spline shaft. 25-30hp (2006 on) Japanese (Tohatsu) model: side gear shift lever & prop nut and split pin.

131/4 x 21

135hp-300hp V6 & Stern Drives with 4 3/4" gearcase 202614 141/4 x 15 202618 141/4 x 17 RH 202622 141/4 x 19 203041 3 202626 141/4 x 21 1/4 202630 14 x 23

RUN FASTER, PULL HARDER, HANDLE BETTER! 414

Quality marine equipment

section section

21 20

Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size LA Code Dia. x Pitch BLA Code B

High Performance Sports Stainless Steel Propellers 135hp-300hp V6 & Stern Drives with 4 3/4" gearcase 202652 202656 202660

143/4 x 23 143/4 x 25 143/4 x 27

203041

High Performance Stainless Steel Propellers 40hp Bigfoot–150hp with a 4 1/4" gearcase 202724 14 x 11 202726 14 x13 202714 131/4 x 15 3 202716 131/4 x 17 203501 202718 131/4 x 19 202720 131/4 x 21

202730 14 x 17 202732 14 x 19 LH 3 203501 202734 14 x 21 202736 14 x 23 202742 14 x 17 202744 14 x 19 3 203501 RH 202746 14 x 21 202748 14 x 23 135hp-300hp V6 & Stern Drives with 4 3/4" gearcase 202812 141/4 x 17 202814 141/4 x 19 203501 3 RH 202816 141/4 x 21 202818 141/4 x 23 202842 141/4 x 17 202844 141/4 x 19 203501 3 LH 202846 141/4 x 21 202848 141/4 x 23 202872 14 x 17 202874 14 x 19 4 203501 RH 202876 14 x 21 202878 14 x 23

High Performance Stainless Steel Propellers 135hp-300hp V6 & Stern Drives with 4 3/4" gearcase 202912 15 x 15 202914 15 x 17 RH 3 203501 202916 15 x 19 202918 15 x 21 202942 15 x 15 202944 15 x 17 LH 3 203501 202946 15 x 19 202948 15 x 21 202972 141/4x 17 202974 141/4x 19 203501 RH 4 202976 141/4x 21 202978 141/4x 23 202988 141/4x 17 202990 141/4x 19 203501 4 LH 202992 141/4x 21 202994 141/4x 23

S18-4459 Prop Spanner - Replaces: 91-821887A-1, 91-859046Q4. A must for every workshop or D.I.Y home boater. Helps with the removal and fitting of most Mercury®/Mariner® propellers 65HP & UP.

Outboard, Fuel Fittings & PROPELLERS

MERCURY®/MARINER®/MERCRUISER®/FORCE® SELECTION GUIDE

Also suitable for Mercruiser® sterndrives MR-ALPHA I. GEN II.

www.bla.com.au

415

section

Outboard, Fuel Fittings & PROPELLERS

honda速/tohatsu速 SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

Aluminium Propellers 8hp-20hp 2 & 4 strokes with a 2 1/2" gearcase 202148

9x9

202152

9 x 10

203205

202160 9x9 3 203208 RH 202164 9 x 10 25hp-30hp 2 & 4 Strokes with a 3" gearcase 202124 202128

103/8 x 11 103/8 x 13

203028

Honda: (not for 8 classic pin drive) 8hp (2001 on), 9.9hp,15hp, 20hp Tohatsu: 14 Spline Shaft 2 Stroke: 9.9 (1984-08), 12hp (1985-88), 15hp & 18hp (1985-05). 4 Stroke: 9.9hp, 15hp, 18hp 12 spline shaft Tohatsu: 2 & 4 stroke, 8hp, 9.8hp 10 spline shaft Honda: BF25hp, BF30hp Tohatsu: 25hp, 30hp

Aluminium Propellers 40hp-70hp 2 & 4 Strokes with a 3 1/2" gearcase 202212 121/2 x 8 202216 12 x 101/2 203012 202220 107/8 x 11 3 202224 103/4 x 12 RH 202228 101/2 x 13 3/8 203013 202232 10 x 14 202236 101/8 x 15 60hp-140hp 2 & 4 Strokes with a 4 1/4" gearcase 202312 14 x 11 202316 14 x 13 202320 131/4 x 15 3 202324 131/4 x 17 203030 RH 202328 131/4 x 19 1/4 202332 13 x 21 202336 131/4 x 23 135hp-225hp 4 Stroke with a 4 3/4" gearcase 202412 151/4 x 15 202416 141/4 x 17 3 202420 141/4 x 19 203031 RH 202424 141/4 x 21 202428 141/4 x 23 202430 14 x 17 4 202432 203507 14 x 19 RH 202434 14 x 21

13 spline shaft Honda: BF35hp, BF40hp, BF45hp, BF50hp 13 spline shaft Tohatsu: 40C, 40D, 50D, 50C, 60A, 60B, 70A2, 70B

15 spline shaft Honda: BF75hp, BF90hp, BF115hp, BF130hp Tohatsu: 60C, 70C, 90hp-140hp

15 spline shaft Honda: BF135hp, BF150hp, BF200hp, BF225hp

High Performance Stainless Steel Propellers 25hp-30hp 2 & 4 Strokes with a 3" gearcase 202460 101/8 x 10 202462 101/8 x 11 202464 101/8 x 12 203028 3 RH 202466 101/8 x 13 202468 101/8 x 14 202470 101/8 x 15 35hp-70hp 2 & 4 Strokes with a 3 1/2" gearcase 202508 12 x 9 203012 202510 12 x 11 202512 12 x 13 202502 101/2 x 11 RH 3 202503 101/2 x 12 202504 101/2 x 13 202505 101/2 x 14 203013 202506 101/2 x 15 60hp-140hp 2 & 4 Strokes with a 4 1/4" gearcase 202514 131/4 x 15 202518 131/4 x 17 203040 RH 3 202522 131/4 x 19 202526 131/4 x 21 135hp-225hp 4 Stroke with a 4 3/4" gearcase 202614 141/4 x 15 202618 141/4 x 17 202622 141/4 x 19 203041 3 RH 202626 141/4 x 21 202630 141/4 x 23

10 spline shaft Honda: BF25hp, BF30hp Tohatsu: 25hp,30hp

13 spline shaft Honda: BF35hp, BF40hp, BF45hp, BF50hp 13 spline Shaft Tohatsu: 40C, 40D, 50D, 50C, 60A, 60B, 70A2, 70B

15 spline shaft Honda: BF75hp, BF90hp, BF115hp, BF130hp Tohatsu: 60C, 70C, 90hp-140hp

15 spline shaft Honda: BF135hp, BF150hp, BF200hp, BF225hp

High Performance Sports Stainless Steel Propellers 135hp-225hp 4 Stroke with a 4 3/4" gearcase 202652 143/4 x 23 3 202656 143/4 x 25 203041 RH 202660 143/4 x 27

15 spline shaft Honda: BF135hp, BF150hp, BF200hp, BF225hp

RUN FASTER, PULL HARDER, HANDLE BETTER! 416

Quality marine equipment

section section

21 20

Outboard, Fuel Fittings & PROPELLERS

honda®/tohatsu® SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

High Performance Stainless Steel Propellers 60hp-140hp 2 & 4 Strokes with a 4 1/4" gearcase 202724 14 x 11 203501 202726 14 x 13 202714 131/4 x 15 203507 RH 3 202716 131/4 x 17 202718 131/4 x 19 203505 202720 131/4 x 21 203501 202730 14 x 17 202732 14 x 19 RH 3 203507 202734 14 x 21 203505 202736 14 x 23 203501 202742 14 x 17 202744 14 x 19 203507 3 202746 14 x 21 LH 203505 202748 14 x 23 135hp-225hp 4 Stroke with a 4 3/4" gearcase 202812 141/4 x 17 202814 141/4 x 19 203501 3 RH 202816 141/4 x 21 202818 141/4 x 23 202842 141/4 x 17 202844 141/4 x 19 203501 3 LH 202846 141/4 x 21 202848 141/4 x 23 202872 14 x 17 202874 14 x 19 RH 4 203501 202876 14 x 21 202878 14 x 23

15 spline shaft Honda: BF75hp, BF90hp (1998 and older) (Mercury® gearcase) Honda: BF75hp, BF90hp (1999 on), BF115hp, BF130hp (Honda® gearcase) Tohatsu: 60C, 70C, 90hp-140hp Honda: BF75hp, BF90hp (1998 and older) (Mercury® gearcase) Honda: BF75hp, BF90hp (1999 on), BF115hp, BF130hp (Honda® gearcase) Tohatsu: 60C, 70C, 90hp-140hp Honda: BF75hp, BF90hp (1998 and older) (Mercury® gearcase) Honda: BF75hp, BF90hp (1999 on), BF115hp, BF130hp (Honda® gearcase) Tohatsu: 60C, 70C, 90hp-140hp

Honda: BF135hp, BF150hp,BF200hp, BF225hp

High Performance Stainless Steel Propellers 135hp-225hp 4 Stroke with a 4 3/4" gearcase 202912 15 x 15 202914 15 x 17 3 203507 RH 202916 15 x 19 202918 15 x 21 202942 15 x 15 202944 15 x 17 3 203507 LH 202946 15 x 19 202948 15 x 21 202972 141/4x 17 202974 141/4x 19 203507 4 RH 202976 141/4x 21 202978 141/4x 23 202988 141/4x 17 202990 141/4x 19 4 LH 202992 141/4x 21 203507 202994

Honda: BF135hp, BF150hp,BF200hp, BF225hp

141/4x 23

www.bla.com.au

417

section

Outboard, Fuel Fittings & PROPELLERS

SUZUKI速 SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

Aluminium Propellers 8hp-15hp 2 & 4 strokes with a 2 1/2" gearcase 202148 9x9 3 203206 RH 202142 9 x 10 25hp-30hp 2 & 4 Strokes with a 3 1/2" gearcase 202136 101/2 x 11 203026 3 RH 202140 101/8 x 13

10 spline shaft Type M DT 2 stroke: 9.9hp (1983-87), 15hp, 15C. DF 4 stroke: 9.9hp, 15hp, 18hp 10 spline shaft DT 2 stroke: 20hp, 25hp, 25C, 30hp, 30C (1987 on). DF 4 Stroke: 25hp, 30hp

Aluminium Propellers 35hp-65hp with a 31/2" gearcase 202212 121/2 x 8 202216 12 x 101/2 202220 107/8 x 11 203011 RH 3 200024 103/4 x 12 202232 101/2 x 13 202236 101/8 x 15 60hp-140hp with a 4 1/4" gearcase 202312 14 x 11 202316 14 x 13 202320 133/4 x 15 3 202324 131/4 x 17 203030 RH 202328 131/4 x 19 1/4 202332 13 x 21 202336 131/4 x 23 202352 14 x 11 202356 14 x 13 202360 133/4 x 15 3 202364 131/4 x 17 203036 RH 202368 131/4 x 19 202372 131/4 x 21 202376 131/4 x 23 150hp-225hp 2 & 4 Strokes with a 4 3/4" gearcase 202412 151/4 x 15 202416 141/4 x 17 3 202420 141/4 x 19 203037 RH 202424 141/4 x 21 1/4 202428 14 x 23 202430 14 x 17 4 203507 202432 14 x 19 RH 202434 14 x 21

13 spline shaft DT 2 stroke: 35C, 40hp, 50hp, 50M, 55hp, 60hp, 65hp (1989 on). DF 4 stroke: 40hp, 50hp

15 spline shaft DF 4 stroke: 90hp, 115hp, 140hp Note: Add 2 inches of pitch for OEM replacement when selecting less than 14" dia. propellers. Note: Highly recommend using Patriot 14" dia. stainless steel propellers.

13 spline shaft DT 2 stroke: 75hp - 140hp (1989 on) DF 4 stroke: 60hp, 70hp

15 spline shaft DT 2 stroke: 150hp - 225hp Note: Not available for 4 stroke outboards. Note: Highly recommend using Voyager 16" dia. stainless steel propellers.

High Performance Stainless Steel Propellers 20hp-30hp 2 & 4 Strokes with a 3" gearcase 202480 101/8 x 10 202482 101/8 x 11 202484 101/8 x 12 203026 3 RH 202486 101/8 x 13 202488 101/8 x 14 202490 101/8 x 15 35hp-60hp 2 & 4 Strokes with a 3 1/2" gearcase 202508 12 x 9 202510 12 x 11 202512 12 x 13 202502 101/2 x 11 203011 3 RH 202503 101/2 x 12 202504 101/2 x 13 1/2 202505 10 x 14 202506 101/2 x 15 60hp-140hp 2 & 4 Stroke with a 4 1/4" gearcase 202514 131/4 x 15 202518 131/4 x 17 203040 3 RH 202522 131/4 x 19 202526 131/4 x 21 202552 131/4 x 15 202556 131/4 x 17 203046 3 202560 131/4 x 19 202564 131/4 x 21 150hp-225hp 2 Stroke with a 4 3/4" gearcase 202614 141/4 x 15 202618 141/4 x 17 3 202622 141/4 x 19 203047 202626 141/4 x 21 1/4 202630 14 x 23

10 spline shaft DT 2 stroke: 20hp, 25hp, 25C, 30hp, 30C (1987 on). DF 4 stroke: 25hp, 30hp

13 spline shaft DT 2 stroke: 35C, 40hp, 50hp, 50M, 55hp, 60hp, 65hp (1989 on). DF 4 stroke: 40hp, 50hp

15 spline shaft DT 2 stroke: 150hp-225hp Note: Not available for 4 Stroke outboards use Voyager 16" dia. propellers.

High Performance Sports Stainless Steel Propellers 150hp-225hp 2 Stroke with a 4 3/4" gearcase 202652 143/4 x 23 3 202656 143/4 x 25 203047 202660 143/4 x 27

15 spline shaft DT 2 stroke: 150hp-225hp Note: Not available for 4 Stroke outboards use Voyager 16" dia. propellers.

RUN FASTER, PULL HARDER, HANDLE BETTER! 418

Quality marine equipment

section section

21 20

Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size LA Code Dia. x Pitch BLA Code B

High Performance Stainless Steel Propellers 60hp-140hp 2 & 4 Strokes with a 4 1/4" gearcase 202730 14 x 17 203509 202732 14 x 19 RH 3 202734 14 x 21 203501 202736 14 x 23 202742 14 x 17 203509 202744 14 x 19 3 LH 202746 14 x 21 203501 202746 14 x 23 202762 14 x 11 202764 14 x 13 202752 131/4 x 15 203506 3 202754 131/4 x 17 202756 131/4 x 19 202758 131/4 x 21 150hp-225hp 2 Stroke with a 4 3/4" gearcase 202812 141/4 x 17 202814 141/4 x 19 203507 3 202816 141/4 x 21 202818 141/4 x 23 202842 141/4 x 17 202844 141/4 x 19 203507 3 202846 141/4 x 21 202848 141/4 x 23 202872 14 x 17 202874 14 x 19 4 203507 202876 14 x 21 202878 14 x 23

15 spline shaft DF 4 stroke: 90hp, 115hp, 140hp Note: Use Hub Kti 203501 for motors pre 2008 and use Hub Kit 203509 for motors 2008 and above

13 spline shaft DT 2 stroke: 75hp - 140hp (1989 on) DF 4 stroke: 60hp, 70hp

15 spline shaft DT 2 stroke: 150hp-225hp Note: Not available for 4 Stroke outboards use Voyager 16" dia. propellers.

High Performance Stainless Steel Propellers 150hp-225hp 2 Stroke with a 4 3/4" gearcase 202912 15 x 15 202914 15 x 19 3 203507 202916 15 x 21 202918 15 x 23 202942 15 x 15 202944 15 x 19 3 203507 202946 15 x 21 202948 15 x 23 202972 141/2 x 17 202974 141/2 x 19 203507 4 202976 141/2 x 21 202978 141/2 x 23 202988 141/2 x 17 202990 141/2 x 19 4 202992 141/2 x 21 203507 202994 141/2 x 23 150hp-300hp 4 Stroke with a 4 3/4" gearcase 202924 16 x 17 202926 16 x 19 3 203507 202928 16 x 21 202930 16 x 23 202954 16 x 17 202956 16 x 19 3 203507 202958 16 x 21 202960 16 x 23

15 spline shaft DT 2 stroke: 150hp-225hp Note: Not available for 4 Stroke outboards use Voyager 16" dia. propellers.

15 spline shaft DF 4 stroke: 150hp-300hp LH

www.bla.com.au

Outboard, Fuel Fittings & PROPELLERS

SUZUKI速 SELECTION GUIDE

419

section

Outboard, Fuel Fittings & PROPELLERS

yamaha速 SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

Aluminium Propellers 8hp-15hp 2 & 4 strokes with a 2 1/2" gearcase 202148 9x9 3 203205 RH 202152 9 x 10 1/2" gearcase 20hp-30hp 2 & 4 strokes with a 3 202124

103/8 x 11

202128

103/8 x 13

203025

2 stroke: 9.9hp, 15hp 4 stroke: 9.9hp, 15hp 10 spline shaft 2 stroke: 20hp, 30hp 4 stroke: 25hp

Aluminium Propellers 25hp-60hp 2 & 4 strokes with a 3 1/2" gearcase 202212 121/2 x 8 202216 12 x 101/2 202220 107/8 x 11 203012 RH 3 200024 103/4 x 12 202232 101/2 x 13 202236 101/8 x 15 50hp-130hp 2 & 4 strokes with a 4 1/4" gearcase 202312 14 x 11 202316 14 x 13 202320 133/4 x 15 3 202324 131/4 x 17 203030 RH 202328 131/4 x 19 202332 131/4 x 21 202336 131/4 x 23 150hp-250hp 2 & 4 strokes with a 4 3/4" gearcase 202412 151/4 x 15 202416 141/4 x 17 RH 3 202420 141/4 x 19 203035 202424 141/4 x 21 202428 141/4 x 23 202430 14 x 17 4 202432 203505 14 x 19 RH 202434 14 x 21

13 spline shaft 2 stroke: 40hp-55hp 4 stroke: FT25hp High Thrust, 30hp-60hp

15 spline shaft 2 stroke: 60hp-130hp 4 stroke: 75hp-115hp High Thrust FT50, FT60

15 spline shaft 2 stroke: 150hp-250hp 4 stroke: 150hp-250hp

High Performance Stainless Steel Propellers 20hp-30hp 2 & 4 strokes with a 3 1/2" gearcase 202460 101/8 x 10 202462 101/8 x 11 202464 101/8 x 12 3 202466 101/8 x 13 203025 RH 202468 101/8 x 14 202470 101/8 x 15 40hp-60hp 2 & 4 strokes with a 3 1/2" gearcase 202508 12 x 9 202510 12 x 11 202512 12 x 13 202502 101/2 x 11 203012 RH 3 202503 101/2 x 12 202504 101/2 x 13 202505 101/2 x 14 202506 101/2 x 15 50hp-130hp 2 & 4 strokes with a 4 1/4" gearcase 202514 131/4 x 15 202518 131/4 x 17 203040 3 RH 202522 131/4 x 19 202526 131/4 x 21 150hp-250hp 2 & 4 strokes with a 4 3/4" gearcase 202614 141/4 x 15 202618 141/4 x 17 3 202622 141/4 x 19 203045 RH 202626 141/4 x 21 1/4 202630 14 x 23

10 spline shaft 2 stroke: 20hp, 30hp 4 stroke: 25hp

13 spline shaft 2 stroke: 40hp-55hp 4 stroke: FT25hp High Thrust, 30hp-60hp

15 spline shaft 2 stroke: 60hp-130hp 4 stroke: 75hp-115hp High Thrust FT50, FT60

15 spline shaft 2 stroke: 150hp-250hp 4 stroke: 150hp-250hp

High Performance Sports Stainless Steel Propellers 150hp-250hp 2 & 4 strokes with a 4 3/4" gearcase 202652 143/4 x 23 3 202656 143/4 x 25 203045 RH 202660 143/4 x 27

15 spline shaft 2 stroke: 150hp-250hp 4 stroke: 150hp-250hp

RUN FASTER, PULL HARDER, HANDLE BETTER! 420

Quality marine equipment

section section

21 20

Outboard, Fuel Fittings & PROPELLERS

yamaha速 SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

High Performance Stainless Steel Propellers 115hp-130hp 2 & 4 strokes with a 4 1/4" gearcase 202724 14 x 11 202726 14 x 13 202714 131/4 x 15 203500 3 RH 202716 131/4 x 17 202718 131/4 x 19 202720 131/4 x 21 202730 14 x 17 202732 14 x 19 RH 3 203500 202734 14 x 21 202736 14 x 23 202742 14 x 17 202744 14 x 19 LH 3 203500 202746 14 x 21 202746 14 x 23 202724 14 x 11 202726 14 x 13 202714 131/4 x 15 203505 RH 3 202716 131/4 x 17 202718 131/4 x 19 202720 131/4 x 21 202730 14 x 17 202732 14 x 19 3 203505 LH 202734 14 x 21 202736 14 x 23 202742 14 x 17 202744 14 x 19 3 203505 RH 202746 14 x 21 202746 14 x 23 150hp-250hp 2 & 4 strokes with a 4 3/4" gearcase 202812 141/4 x 17 202814 141/4 x 19 203505 3 RH 202816 141/4 x 21 202818 141/4 x 23 202842 141/4 x 17 202844 141/4 x 19 203505 3 LH 202846 141/4 x 21 202848 141/4 x 23 202872 14 x 17 202874 14 x 19 4 203505 RH 202876 14 x 21 202878 14 x 23

High Thrust: FT50 & FT60 2 stroke: 60hp-100hp 4 stroke: 75hp-100hp Note: If propellers strikes trim tab, replace with Yamaha part # 6E5-45371-10

15 spline shaft 2 stroke: 115hp, 130hp 4 stroke: 115hp Note: If propellers strikes trim tab, replace with Yamaha part # 6E5-45371-10

15 spline shaft 2 stroke: 150hp-250hp 4 stroke: 150hp-250hp

High Performance Stainless Steel Propellers 150hp-250hp 2 & 4 strokes with a 4 3/4" gearcase 202912 15 x 15 202914 15 x 19 3 203505 RH 202916 15 x 21 202918 15 x 23 202942 15 x 15 202944 15 x 19 LH 3 203505 202946 15 x 21 202948 15 x 23 202972 141/2 x 17 202974 141/2 x 19 203505 4 RH 202976 141/2 x 21 202978 141/2 x 23 202988 141/2 x 17 202990 141/2 x 19 203505 4 LH 202992 141/2 x 21 202994 141/2 x 23

15 spline shaft 2 stroke: 150hp-250hp 4 stroke: 150hp-250hp

www.bla.com.au

421

section

Outboard, Fuel Fittings & PROPELLERS

422

OMC® COBRA/VOLVO PENTA® SX SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

Aluminium Propellers 2.3LTR-3.0LTR Stern Drive with a 4 1/4" gearcase 202356 14 x 13 202360 133/4 x 15 202364 131/4 x 17 203033 RH 3 202368 131/4 x 19 202372 131/4 x 21 202376 131/4 x 23 V6 & V8 Stern Drive with a 4 3/4" gearcase 202412 151/4 x 15 202416 141/4 x 17 RH 3 202420 141/4 x 19 203032 202424 141/4 x 21 1/4 202428 14 x 23 202412 151/4 x 15 202416 141/4 x 17 RH 3 202420 141/4 x 19 203034 202424 141/4 x 21 202428 141/4 x 23 202430 14 x 17 4 203502 202432 14 x 19 RH 202434 14 x 21 202430 14 x 17 4 203504 202432 14 x 19 RH 202434 14 x 21

13 spline shaft Cobra: 400 (1978-89)

High Performance Stainless Steel Propellers 2.3LTR-3.0LTR Stern Drive with a 4 1/4" gearcase 202552 131/4 x 15 202556 131/4 x 17 203043 RH 3 202560 131/4 x 19 202564 131/4 x 21 V6 & V8 Stern Drive with a 4 3/4" gearcase 202614 141/4 x 15 202618 141/4 x 17 RH 3 202622 141/4 x 19 203042 202626 141/4 x 21 1/4 202630 14 x 23 202614 141/4 x 15 202618 141/4 x 17 RH 3 202622 141/4 x 19 203044 202626 141/4 x 21 202630 141/4 x 23

13 spline shaft Cobra: 400 (1978-89)

15 spline shaft OMC® Cobra 800 & King Cobra Stern Drives: 3.0L-7.5L/ 454, 502 King Stern Drives 19 spline shaft Volvo Penta® SX & OMC® SX Cobra Stern Drives, (1994 on) Note: Not available for Duo Prop or Aquamatic

High Performance Sports Stainless Steel Propellers V6 & V8 Stern Drive with a 4 3/4" gearcase 202652 143/4 x 23 202656 143/4 x 25 203042 3 202660 143/4 x 27 202652 143/4 x 23 3 202656 143/4 x 25 203044 202660 143/4 x 27

Quality marine equipment

15 spline shaft OMC® Cobra 800 & King Cobra Stern Drives: 3.0L-7.5L/ 454, 502 King Stern Drives

19 spline shaft Volvo® Penta SX & OMC® SX Cobra Stern Drives, (1994 on) Note: Not available for Duo Prop or Aquamatic

section section

21 20

Outboard, Fuel Fittings & PROPELLERS

OMC® COBRA/VOLVO PENTA® SX SELECTION GUIDE Propeller Propeller Hub Kit Blades Rotation Suits Motor Models Housing Size BLA Code Dia. x Pitch BLA Code

High Performance Stainless Steel Propellers 2.3LTR-3.0LTR Stern Drive with a 4 1/4" gearcase 202762 14 x 11 202764 14 x 13 202752 131/4 x 15 203503 RH 3 202754 131/4 x 17 202756 131/4 x 19 202758 131/4 x 21 V6 & V8 Stern Drive with a 4 3/4" gearcase 202812 141/4 x 17 202814 141/4 x 19 203502 RH 3 202816 141/4 x 21 202818 141/4 x 23 202812 141/4 x 17 202814 141/4 x 19 203504 3 RH 202816 141/4 x 21 202818 141/4 x 23 202842 141/4 x 17 202844 141/4 x 19 203502 3 LH 202846 141/4 x 21 202848 141/4 x 23 202842 141/4 x 17 202844 141/4 x 19 203504 3 LH 202846 141/4 x 21 202848 141/4 x 23 202872 14 x 17 202874 14 x 19 RH 4 203502 202876 14 x 21 202878 14 x 23 202872 14 x 17 202874 14 x 19 4 203504 RH 202876 14 x 21 202878 14 x 23

13 spline shaft Cobra: 400 (1978-89)

15 spline shaft OMC® Cobra 800 & King Cobra Stern Drives: 3.0L-7.5L/ 454, 502 King Stern Drives 19 spline shaft Volvo® Penta SX & OMC® SX Cobra Stern Drives, (1994 on) Note: Not available for Duo Prop or Aquamatic 15 spline shaft OMC® Cobra 800 & King Cobra Stern Drives: 3.0L-7.5L/ 454, 502 King Stern Drives 19 spline shaft Volvo® Penta SX & OMC® SX Cobra Stern Drives, (1994 on) Note: Not available for Duo Prop or Aquamatic 15 spline shaft OMC® Cobra 800 & King Cobra Stern Drives: 3.0L-7.5L/ 454, 502 King Stern Drives 19 spline shaft Volvo® Penta SX & OMC® SX Cobra Stern Drives, (1994 on) Note: Not available for Duo Prop or Aquamatic

High Performance Stainless Steel Propellers V6 & V8 Stern Drive with a 4 3/4" gearcase 202912 15 x 15 202914 15 x 19 3 203502 202916 15 x 21 202918 15 x 23 202912 15 x 15 202914 15 x 19 3 203504 202916 15 x 21 202918 15 x 23 202942 15 x 15 202944 15 x 19 3 203502 202946 15 x 21 202948 15 x 23 202942 15 x 15 202944 15 x 19 3 203504 202946 15 x 21 202948 15 x 23 202972 141/2 x 17 202974 141/2 x 19 203502 4 202976 141/2 x 21 202978 141/2 x 23 202972 141/2 x 17 202974 141/2 x 19 203504 4 202976 141/2 x 21 202978 141/2 x 23 202988 141/2 x 17 202990 141/2 x 19 203502 4 202992 141/2 x 21 202994 141/2 x 23 202988 141/2 x 17 202990 141/2 x 19 203504 4 202992 141/2 x 21 202994 141/2 x 23

15 spline shaft OMC® Cobra 800 & King Cobra Stern Drives: 3.0L-7.5L/ 454, 502 King Stern Drives

19 spline shaft Volvo® Penta SX & OMC® SX Cobra Stern Drives, (1994 on) Note: Not available for Duo Prop or Aquamatic

15 spline shaft OMC® Cobra 800 & King Cobra Stern Drives: 3.0L-7.5L/ 454, 502 King Stern Drives

19 spline shaft Volvo® Penta SX & OMC® SX Cobra Stern Drives, (1994 on) Note: Not available for Duo Prop or Aquamatic

15 spline shaft OMC® Cobra 800 & King Cobra Stern Drives: 3.0L-7.5L/ 454, 502 King Stern Drives

19 spline shaft Volvo® Penta SX & OMC® SX Cobra Stern Drives, (1994 on) Note: Not available for Duo Prop or Aquamatic

RUN FASTER, PULL HARDER, HANDLE BETTER! www.bla.com.au

423

section

Outboard, Fuel Fittings & PROPELLERS

424

OEM TO Turning Point Ref. Guide

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

Propeller Housing BLA Code

OEM Hub Kit Part Number BLA Code

EVINRUDE®/JOHNSON® Stainless

EVINRUDE®/JOHNSON® ALUMINIUM

175190 175191

203022 203022

Propeller Housing BLA Code

202112

176572

203043

202556

202116

176573

203043

202560

176574

203043

202564

176214

203033

202364

176215

203033

202368

176609

203042

202626

176216

203033

202372

176615

203042

202618

202264

176617

203042

202622

176623

203043

202556

176421

203012

176422

203012

202268

382761

203033

202356

176624

203043

202560

386786

203012

202264

176625

203043

202564

202268

176626

203042

202618

176627

203042

202622

386841

203012

386907

203012

202256

386909

203012

202260

176628

203042

202626

389788

203033

202372

389019

203042

202630

202376

389510

203043

202560

389512

203043

202564

390895

203033

390896

203033

202368

391198

203033

202360

389923

203042

202626

391199

203033

202364

389924

203042

202622

202416

389948

203043

202556

389949

203043

202552

391200

203032

391201

203032

202420

391202

203032

202424

391290

203042

202618

391203

203032

202428

394752

203042

202622

202412

394753

203042

202626

394754

203042

202630

391535

203032

391668

203033

202356

177131

203033

202364

394758

203043

202560

177133

203032

202412

394759

203043

202564

177134

203032

202416

177135

203032

202420

177136

203032

202424

177137

203032

202428

177139

203033

202368

177140

203033

202372

177148

203033

202352

3850299-3

203034

202412

177149

203033

202356

3850300-9

203034

202416

3850301-7

203034

202420

EVINRUDE®/JOHNSON® RAKER

394755

203042

202652

394756

203042

202656

394757

203042

202660

VOLVO ALUMINIUM

177151

203033

202360

5031619

203011

202228

3850302-5

203034

202424

5031620

203011

202232

3850303-3

203034

202428

5031622

203011

202216

5031623

203011

202220

5031624

203011

202224

5031627

203011

202236

5033322

203030

202320

5033323

203030

202324

5033324

203030

202328

5033325

203030

202332

5033326

203030

202336

Quality marine equipment

VOLVO® STAINLESS

3850305-8

203044

202614

3850307-4

203044

202812

3850308-2

203044

202622

3850309-0

203044

202626

3850310-8

203044

202630

section section

21 20

Propeller Housing BLA Code

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

Propeller Housing BLA Code

MERCURY速 QUICKSILVER

MERCURY速 BLACK MAX 48-19638A40

203021

202112

QA2070R

203011

202220

48-19640A40

203021

202116

QA2070T

203011

202220

48-42738A10

203011

202212

QA2226R

203011

202220

48-42738A12

203011

202212

QA2226T

203011

202220

48-42740A10

203011

202216

QA6070T

203011

202220

48-73132A40

203011

202216

QA2070R

203011

202224

48-73134A40

203011

202224

QA2072T

203011

202224

48-73136A40

203011

202228

QA2072R

203011

202224

48-73138A40

203011

202232

QA2074R

203011

202224

48-73140A40

203011

202236

QA2074T

203011

202224

48-77338A40

203030

202312

QA6072T

203011

202224

48-77340A40

203030

202316

QA6074T

203011

202228

48-77342A40

203030

202320

QA2076R

203011

202228

48-77344A40

203030

202324

QA2076T

203011

202228

48-77346A40

203030

202328

QA2078R

203011

202228

48-77348A40

203030

202332

QA2078T

203011

202228

48-77350A40

203030

202336

QA2230R

203011

202228

48-78116A40

203031

202412

QA2230T

203031

202228

48-78116A45

203031

202412

QA6076T

203011

202228

48-78118A40

203031

202416

QA6078T

203011

202228

48-78120A40

203031

202420

QA2080R

203011

202232

48-78122A40

203031

202424

QA2080T

203011

202232

48-78124A40

203031

202428 202416

QA2082R

203011

202232

48-79572A4

203031

48-79574A4

203031

202420

QA2082T

203011

202232

48-79576A4

203031

202424

QA2232R

203011

202232

48-79578A4

203031

202428

QA2232T

203011

202232

48-816702A40

203011

202224

QA6080T

203011

202232

48-816704A40

203011

202228

QA6082T

203011

202232

48-816706A40

203011

202232

QA2084R

203011

202236

48-827312A10

203011

202216

QA2084T

203011

202236

48-832828A45

203031

202416

QA2234T

203011

202236

48-832830A45

203031

202420

QA2234T

203011

202236

48-832832A45

203031

202424

QA6084T

203011

202236

48-832834A45

203031

202428

QA2060R

203011

202212

48-85632A40

203011

202220

QA1050T

203011

202212

48-9570A4

203031

202412

QA2064R

203011

202212

QA2064T

203011

202212

QA2066R

203011

202216

QA2066T

203011

202216

QA2068R

203011

202216

QA2068T

203011

202216

QA2070R

203012

202220

QA2070T

203012

202220

QA2072R

203012

202224

QA2072T

203012

202224

QA2074R

203012

202224

QA2704T

203012

202224

QA2076R

203012

202228

QA2076T

203012

202228

www.bla.com.au

Outboard, Fuel Fittings & PROPELLERS

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

425

section

Outboard, Fuel Fittings & PROPELLERS

426

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

Propeller Housing BLA Code

MERCURY速 QUICKSILVER

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

Propeller Housing BLA Code

MERCURY速 QUICKSILVER

QA2078R

203012

202228

QA2040X

203030

202332

QA2078T

203012

202228

QA6040

203030

202332

QA2080R

203012

202228

QA2042

203030

202336

QA2080T

203012

202232

QA2042X

203030

202336

QA2082R

203012

202232

QA6042

203030

202336

QA2082T

203012

202232

QA2030

203030

202312

QA2084R

203012

202236

QA2030X

203030

202312

QA2084T

203012

202236

QA6030

203030

202312

QA2060R

203012

202212

QA2032

203030

202316

QA2060T

203012

202212

QA2032X

203030

202316

QA2064R

203012

202212

QA6032

203030

202316

QA2064T

203012

202212

QA1912X

203031

202416

QA2066R

203012

202216

QA2012X

203031

202416

QA2066T

203012

202216

QA6012

203031

202416

QA2068R

203012

202216

QA1916X

203031

202420

QA2068T

203012

202216

QA2016X

203031

202420

QA3088T

203012

202268

QA6016

203031

202420

QA3080T

203012

202256

QA1918X

203031

202424

QA3082T

203012

202260

QA2018X

203031

202424

QA3084T

203012

202264

QA6018

203031

202424

QA3080R

203013

202220

QA1920X

203031

202428

QA3082R

203013

202228

QA2008X

203031

202412

QA3084R

203013

202236

QA2012X

303032

202416

QA2128R

203201

202148

QA3012 H1

303032

202416

QA2130R

203201

202152

QA3012X

303032

202416

QA2158R

203208

202160

QA2016X

203032

202420

QA2160R

203208

202160

QA3016 H1

203032

202420

QA2102R

203021

202112

QA3016X

203032

202420

QA2102T

203021

202112

QA2018X

203032

202424

QA6102T

203021

202112

QA3018H1

203032

202424

QA2106R

203021

202116

QA3018X

203032

202424

QA2106T

203021

202116

QA3048R

203032

202424

QA6106T

203021

202116

QA3020 H1

203032

202428

QA3114T

203012

202012

QA3020X

203032

202428

QA3118T

203022

202116

QA2008X

203032

202412

QA3102R

203022

202124

QA3008 H1

203032

202412

QA3102T

203022

202124

QA3008X

203032

202428

QA3810R

203025

202124

QA3034R

203033

202360

QA3814R

203025

202128

QA3034R

203033

202364

QA2248R

203026

202136

QA3034T

203033

202364

QA2254R

203026

202140

QA3036R

203033

202364

QA2034

203030

202320

QA3036T

203033

202364

QA2034X

203030

202320

QA3038R

203033

202364

QA6034

203030

202320

QA3040R

203033

202368

QA2036

203030

202324

QA3040T

203033

202368

QA2036X

203030

202324

QA3042R

203033

202368

QA6036

203030

202324

QA3042R

203033

202368

QA2038

203030

202328

QA3042T

203033

202368

QA2038X

203030

202328

QA3046R

203033

202372

QA6038

203030

202328

QA3046T

203033

202372

QA2040

203030

202332

QA3048R

203033

202372

Quality marine equipment

section section

21 20

OEM TO Turning Point Ref. Guide

Propeller Housing BLA Code

MERCURY速 QUICKSILVER

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

Propeller Housing BLA Code

MERCURY速 QUICKSILVER

QA3048T

203033

202372

QS5070 H1

203042

202622

QA3030R

203033

202352

QS5070X

203042

202622

QA3030T

203033

202352

QS5056 H1

203042

202626

QA3032R

203033

202356

QS5056X

203042

202626

QA3032T

203033

202356

QS5072 H1

203042

202626

QA2012X

203034

202416

QS5072X

203042

202626

QA3012X

203034

202416

QS5058 H1

203042

202630

QA2016X

203034

202420

QS5058X

203042

202630

QA3016X

203034

202420

QS5074 H1

203042

202630

QA2018X

203034

202424

QS5074X

203042

202630

QA3018X

203034

202424

QS5136

203043

202552

QA3020X

203034

202428

QS5136 H

203043

202552

QA2008X

203034

202412

QS5138

203043

202556

QA3008X

203034

202412

QS5138 H

203043

202556

QA2012X

203035

202416

QS5140

203043

202560

QA2016X

203035

202420

QS5140 H

203043

202560

QA2018X

203035

202424

QS5142

203043

202564

QA1920X

203035

202428

QS5142 H

203043

202564

QA2008X

203035

202412

QS5050X

203044

202614

QA2208H

203036

202360

QS5052X

203044

202618

QA2206H

203036

202364

QS5054X

203044

202622

203044

202622

QA2204H

203036

202368

QS5070X

QA2202H

203036

202372

QS5056X

203044

202626

QA1912X

203037

202416

QS5072X

203044

202626

QA1916X

203037

202420

QS5058X

203044

202636

203044

202636

QA1918X

203037

202424

QS5074X

QA1920X

203037

202428

QS5050X

203045

202614

QA2008X

203037

202412

QS5052X

203045

202618

QS5116

203040

202514

QS5054X

203045

202622

203045

202622

QS5116X

203040

202514

QS5070X

QS5118

203040

202518

QS5056X

203045

202626

QS5118X

203040

202518

QS5072X

203045

202626

202522

QS5058X

203045

202630

203045

202630

QS5120

203040

QS5120X

203040

202522

QS5074X

QS5122

203040

202526

QS5216H

203046

202552

QS5122X

203040

202526

QS5218H

203046

202556

202614

QS220H

203046

202560

203046

202564

QS5050X

203041

QS5052X

203041

202618

QS5222H

QS5054X

203041

202622

QS5050X

203047

202614

202622

QS5052X

203047

202618

202626

QS5054X

203047

202622

203047

202622 202626

QS5070X QS5056X

203041 203041

QS5072X

203041

202626

QS5070X

QS5058X

203041

202630

QS5056X

203047

202630

QS5072X

203047

202626

203047

2026230

203047

202630

QS5074X

203041

QS5050H1

203042

202614

QS5058X

QS5050X

203042

202614

QS5074X

QS5052 H1

203042

202618

QS5052X

203042

202618

QS5054 H1

203042

202622

QS5054X

203042

202622

www.bla.com.au

Outboard, Fuel Fittings & PROPELLERS

OEM Hub Kit Part Number BLA Code

427

section

Outboard, Fuel Fittings & PROPELLERS

428

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

Propeller Housing BLA Code

MERCURY® TEMPEST PLUS 48-825864A47 48-825866A47 48-825868A47

203041 203041 203041

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

Propeller Housing BLA Code

YAMAHA® ALUMINIUM

202652

663-45947-02-EL

203012

202220

202656

663-45956-01-EL

203012

202212

202660

663-45958-01-EL

203012

202232

664-45947-01-EL

203025

202124

MERCURY® VENGENCE

664-45949-02-EL

203025

202128

48-16312A4

203041

202614

6E5-45941-00-EL

203040

202328

48-16314A4

203041

202618

6E5-45943-00-EL

203040

202332

48-16316A4

203041

202622

6E5-45945-01-EL

203040

202324

48-16318A4

203041

202626

6E5-45947-00-EL

203040

202320

48-16320A4

203041

202630

6E5-45949-00-EL

203040

202316

48-16986A5

203040

202514

6E5-45952-00-EL

203040

202336

48-16988A5

203040

202518

6E5-45954-00-EL

203040

202312

48-16990A40

203040

202522

6G5-45941-00-98

203045

202412

48-16992A40

203040

202526

6G5-45943-01-98

203045

202424

6G5-45945-01-98

203045

202420

6G5-45947-01-98

203045

202416

6G5-45949-01-98

203045

202428

6H5-45943-00-EL

203012

202236

6H5-45945-00-EL

203012

202228

6H5-45952-00-EL

203012

202224

203012

202232

HONDA ALUMINIUM ®

58130-ZV5-000ZA

203012

202228

58130-ZV5-850ZA

203012

202224

58130-ZV5-860ZA

203012

202216

58130-ZV5-870ZA

203012

202236

58130-ZV7-011AH

203028

202124

58130-ZV7-012AH

203028

202128

6H5-45958-00-EL

58130-ZW1-W01ZA 203030

202312

58130-ZW1-W11ZA 203030

202316

66K-45970-B0-00

203045

202660

58130-ZW1-W21ZA 203030

202320

66K-45972-B0-00

203045

202656

58130-ZW1-W21ZA 203030

202324

6J9-45972-B0-00

203045

202652

58130-ZW1-W41ZA 203030

202332

58130-ZW1-W51ZA 203030

202336

58130-ZW1-W61ZA 203030

202328

688-45970-03-98

203040

202522

202412

688-45972-02-98

203040

202526

202416

688-45978-60-98

203040

202514

203040

202518

58130-ZY3-015A 58130-ZY3-017A

203031 203031

YAMAHA PRO SERIES

YAMAHA® STAINLESS

58130-ZY3-019A

203031

202420

688-46930-02-98

58130-ZY3-021A

203031

202424

6G5-45970-02-98

203045

202614

202428

6G5-45972-02-98

203045

202626

6G5-45974-03-98

203045

202622

6G5-45976-01-98

203045

202630

6G5-45978-03-98

203045

202812

58130-ZY3-023A

203031

HONDA® STAINLESS 58130-ZW1-V01

203040

202518

58130-ZW1-V11

203040

202522

58130-ZW1-V31

203040

202526

58130-ZW1-W91

203040

202514

58233-ZY3-A15H

203041

202614

58233-ZY3-A17H

203041

202618

58233-ZY3-A19H

203041

202622

58233-ZY3-A21H

203041

202626

58233-ZY3-A23H

203041

202630

Quality marine equipment

section section

21 20

Propeller Housing BLA Code

SUZUKI® ALUMINIUM

58100-90J00-019

203030

202324

58100-90J10-019

203030

202328

58100-90J20-019

203030

202332

58100-90J30-019

203030

202336

58100-94302-019

203011

202212

58100-94313-019

203011

202228

58100-94500-019

203036

202360

58100-94522-019

203036

202368

58100-95212-019

203011

202216

58100-95222-019

203011

202220

58100-95353-019

203011

202232

58100-95363-019

203011

202236

58100-95382-019

203011

202268

58100-95393-019

203011

202224

58100-95511-019

203036

202364

58100-95530-019

203036

202372

58100-96420-019

203026

202136

58100-96440-019

203026

202140

SUZUKI STAINLESS

Wide Open Throttle CHART Outboards & sterndrives HP/MODEL WOT RPM GEAR RATIO

EVINRUDE®/JOHNSON® (DIRECT INJECTION & 4 STROKE)

5 4-Stroke

5500-6500

2.23

6 4-Stroke

5500-6500

2.23

8 4-Stroke

5000-6000

2.42

9.9 4-Stroke

5000-6000

2.42

15 4-Stroke

5000-6000

2.42

25 4-Stroke

4700-5300

1.09

30 4-Stroke

5200-5800

2.09

40 4-Stroke

5200-5800

2.27

50 4-Stroke

5900-6500

2.27

70 4-Stroke

5200-5800

2.42

90 4-Stroke

4500-5500

2.59

115 4-Stroke

5000-6000

2.59

140 4-Stroke

5600-6200

2.38

200 4-Stroke

5000-6000

2.29

225 4-Stroke

5000-6000

2.29

40 E-Tec

4500-5500

2.67

50 E-Tec

5000-6000

2.67

60 E-Tec

5000-6000

2.67

75 E-Tec

4500-5500

2.00

99105-00100-16P

203046

202552

99105-00100-18P

203046

202556

90 E-Tech

4500-5500

2.00

202560

200 HO E-Tec

4500-5800

1.85

202564

225 E-Tec

4500-5800

1.85

225 HO E-Tec

4500-5800

1.85

99105-00100-20P 99105-00100-22P

203046 203046

99105-00200-16P

203047

202614

99105-00200-18P

203047

202618

250 E-Tec

4500-5800

1.85

202622

75 DI

4750-5250

2.00

202626

90 DI

5250-5750

2.00

202630

100 DI

5250-5750

2.00

115 DI

5250-5750

2.00

135 DI

4750-5250

1.86

99105-00200-20P 99105-00200-22P 99105-00200-24P

203047 203047 203047

TOHATSU® ALUMINIUM 346-64102-5

203028

202124

150 DI & HO DI

4750-5250

1.86

346-64104-5

203028

202128

175 DI

5250-5750

1.86

34864-1020M

203013

202228

200 DI & HO DI

5500-6000

1.86

34864-1030M

203013

202232

225 DI & HO DI

5500-6000

1.86

34864-1070M

203013

202212

250 DI

5500-6000

1.86

35364-1020M

203013

202216

35364-1030M

203013

202220

35364-1040M

203013

202224

35364-1050M

203013

202228

35364-1060M

203013

202232

35364-1070M

203013

202236

36164-1130M

203013

202220

36164-1140M

203013

202224

3B764-5320M

203030

202320

3B764-5410M

203030

202324

3B764-5450M

203030

202328

3E364-5260M

203013

202224

3E364-5280M

203013

202228

3E364-5310M

203013

202232

www.bla.com.au

Outboard, Fuel Fittings & PROPELLERS

OEM TO Turning Point Ref. Guide OEM Hub Kit Part Number BLA Code

429

section

Outboard, Fuel Fittings & PROPELLERS

430

Wide Open Throttle CHART Outboards & sterndrives HP/MODEL WOT RPM GEAR RATIO

EVINRUDE速/JOHNSON速 (CARBURETTED 2 STROKE)

5500-6500

2.42

5200-5800

2.15

5200-5800

2.15

5200-5800

2.15

4500-5500

2.23

4500-5500

2.23

5000-6000

2.23

5000-6000

2.23

4500-5500

2.00

115

4500-5500

2.00

135

5000-6000

2.25

150

4500-5500

1.86

175

4500-5500

1.86

200

5000-6000

1.86

225

5000-6000

1.86

250

5000-6000

1.86

HONDA速 OUTBOARDS

4000-5000

2.40

4000-5000

2.10

4950-5500

2.40

9.9

4500-5500

2.10

5000-6200

2.10

5000-6600

2.08

5000-6000

2.08

5500-6000

2.08

5500-6000

2.09

5500-6000

2.09

5000-6000

2.30

5000-6000

2.00

115

5000-6000

2.00

130

5000-6000

2.00

135

5000-6000

2.14

150

5000-6000

1.86

200

5000-6000

1.86

225

5000-6000

1.86

Quality marine equipment

Wide Open Throttle CHART Outboards & sterndrives HP/MODEL WOT RPM GEAR RATIO

MERCURY速 OUTBOARDS

2.5

4000-5000

1.85

3.3

4500-5500

2.15

4500-5500

2.15

4 4-Stroke

4500-5500

2.15

4000-5000

2.15

5 4-Stroke

4500-5500

2.15

4000-5000

2.00

6 4-Stroke

5000-6000

2.15

4500-5500

2.00

9.9

5000-6000

2.00

9.9 4 Stroke

4500-5500

2.01

9.9 Big Foot

4500-5500

2.42

9.9 Saltwater

4500-5500

2.42

5000-6000

2.00

15 4-Stroke

4500-5500

2.42

15 Big Foot

4500-5500

2.42

4500-5500

2.25

25 Classic

5000-6000

2.25

25 Big Foot

5500-6000

2.40

4500-5500

2.00

30 4-Stroke

5500-6000

2.00

40 Classic

4500-5500

2.00

5000-5500

1.83

40 4-Stroke

5500-6000

2.00

40 Big Foot

5500-6000

2.30

50 Classic

5000-5500

1.83

50 4-Stroke

5500-600

1.83

50 Big Foot

5000-5500

2.30

60 Classic

5000-5500

1.64

60 Big Foot

5000-5500

2.30

75 Classic

4750-5250

2.30

75 4-Stroke

5000-5500

2.30

90 Classic

5000-5500

2.30

90 SW

5000-5500

2.30

90 4-Stroke

5000-5500

2.30

90 4-Stroke SW

5000-5500

2.30

115

4750-5250

2.07

115 4-Stroke

5000-6000

2.07

115 4-Stroke SW

5000-6000

2.07

125 Classic

4750-5250

2.07

125 SW

4750-5250

2.07

135 OptiMax

5000-5600

2.00

135 SW OptiMax

5000-5600

2.00

150 XR6

5000-5600

1.87

150 SW

5000-5600

1.87

150 EFI

5000-5600

1.87

150 SW EFI

5000-5600

1.87

150 OptiMax

5000-5600

1.87

section section

21 20

HP/MODEL WOT RPM GEAR RATIO

MERCURY速 OUTBOARDS

WOT CHART Outboards & sterndrives MODEL HP WOT RPM GEAR RATIO

DRIVE

MERCRUISER速 STERNDRIVES

175 EFI

5000-5600

1.87

3.0 L

135

4400-4800

2.00

175 OptiMax

5250-5750

1.87

4.3 L

190

4400-4800

1.81

200 Classic

5000-5600

1.87

4.3 LH

205

4400-4800

1.81

200 SW

5000-5600

1.87

4.3 L EFI

210

4400-4800

1.62

200 EFI

5000-5800

1.87

5.0 L

220

4400-4800

1.62

200 EFI SW

5000-5600

1.87

5.0 L

220

4400-4800

1.65

200 OptiMax

5000-5750

1.75

5.0 L EFI

240

4400-4800

1.47

225 EFI

5000-5800

1.75

5.0 L EFI

240

4400-4800

1.65

225 EFI SW

5000-5800

1.75

5.7 L

250

4400-4800

1.47

225 OptiMax

5000-5750

1.75

5.7 L

250

4400-4800

1.65

225 XL OptiMax SW 5000-5750

1.75

5.7 L EFI

260

4400-4800

1.47

225 XL 4-Stroke

5000-6000

2.00

5.7 L EFI

260

4400-4800

1.65

250 XL EFI SW

5000-5800

1.75

350 Mag MPI 300

4600-5000

1.50

200 Verado

5800-6400

1.85

350 Mag MPI 300

4600-5000

1.47

225 Verado

5800-6400

1.85

350 Horizon 300

4600-5000

1.47

250 Verado

5800-6400

1.85

350 Horizon 300

4600-5000

1.50

275 Verado

5800-6400

1.85

MX6.2L MPI 320

4800-5200

1.65

TOHATSU速 OUTBOARDS

496 Mag

375

4400-4800

1.5

496 Mag HO 425

4600-5000

1.5

2.5

3800-5200

1.85

3.5

4300-5200

2.15

4 4-Stroke

4500-5500

2.15

3.0 GS

135

4600

1.97

4500-5500

2.15

4.3 GL

190

4800

1.66

5 4-Stroke

4500-5500

2.15

4.3 GXi

225

4800

1.66

6 4-Stroke

5500-6000

2.15

5.0 GL

220

4800

1.51

4500-5500

2.08

5.0 GXi

270

5000

1.51

9.8

5000-5800

2.08

5.7 GS

260

4800

1.43

9.9 4-Stroke

4500-5500

2.08

5.7 GSi

280

5000

1.43

15 4-Stroke

5000-6000

1.85

5.7 GXi

320

5000

1.43

4750-5500

1.85

Diesels

4800-5500

1.92

D3-110

105

3000

2.30

4800-5500

1.92

D3-130

125

4000

2.30

25 4-Stroke

5000-6000

1.92

D3-160

157

4000

2.30

30 4-Stroke

5250-6250

1.92

AD31L

122

3800

2.30

4500-5500

1.85

AD31P

141

3900

2.30

5000-5700

1.85

4900-5600

2.30

5000-5500

2.30

120

5200-5700

2.00

140

5200-5700

2.00

VOLVO PENTA速 STERNDRIVES

www.bla.com.au

Outboard, Fuel Fittings & PROPELLERS

WOT CHART Outboards & sterndrives

431

section

Outboard, Fuel Fittings & PROPELLERS

432

WOT CHART Outboards & sterndrives HP/MODEL WOT RPM GEAR RATIO

YAMAHA速 OUTBOARDS

4000-5000

2.08

200 HPOI

4500-5500

1.86

4500-5500

2.08

200V Max HPDI

4500-5500

1.86

4 4-Stroke

4000-5000

2.08

200 V Max 3.1 EFIV6

4500-5500

1.81

4500-5500

2.08

225 4-Stroke

5000-6000

2.00

6 4-Stroke

4500-5500

2.08

225 V Max 3.1 EFI

4500-5500

1.81

4500-5500

2.08

225 SW EFI

4500-5500

1.81

8 4-Stroke

5000-6000

2.08

225 V Max HPDI

4500-5500

1.75

8 4-Stroke HT

5000-6000

2.92

250 4-Stroke

5000-6000

2.00

9.9

4500-5000

2.08

250 V Max 3.1

4500-5500

1.81

9.9 4-Stroke

4500-5500

2.92

250 SW EFI

4500-5500

1.81

9.9 4-Stroke HT

4000-5000

2.92

250 V Max HPDI

4500-5650

1.75

4500-5500

2.08

300 HPDI

4650-5650

1.75

15 4-Stroke

4500-5500

2.08

300 V Max HPDI

4650-5650

1.75

4500-5500

2.08

4500-5500

1.85

25 4-Stroke

5500-6000

2.08

25 4-Stroke HT

5000-6000

2.41

4500-5500

1.85

30 4-Stroke

5000-6000

2.00

4500-5500

1.85

C40

4500-5500

1.85

F 40 4-Stroke

5000-6000

2.00

4500-5500

1.85

C 50

4500-5500

1.85

F 50 4-Stroke

5000-6000

1.85

T 50 HT

5000-6000

2.33

4500-5500

2.33

C 60

4500-5500

2.33

F 60 4-Stroke

5000-6000

1.85

5000-6000

2.33

C 70

5000-6000

2.33

F 80 4-Stroke

5000-6000

2.31

4500-5500

2.00

F 90

4500-5500

2.00

F 100 4-Stroke

5000-3000

2.31

115

4500-5500

2.00

F 115 4-Stroke

5000-6000

2.15

130

5000-6000

2.00

150 SW EFI

4500-5500

1.86

150 HPDI

4500-5500

1.86

150 4-Stroke

5000-6000

1.86

150 V Max

4500-5500

2.00

150 V Max HPDI

4500-5500

2.00

150 V Max TRP

4500-5500

2.00

150 V Max EFI

4500-5500

2.00

175 HPDI

4500-5500

1.86

175 V Max

4500-5500

1.86

200 4-Stroke

5000-6000

2.00

200 SW EFI

4500-5500

1.86

Quality marine equipment

SUZUKI速 OUTBOARDS

4500-5400

1.91

4500-5500

1.91

DF9.9

4500-5500

1.91

DF15

5400-6000

1.91

DT25

4500-5500

1.91

DF25

4700-5300

2.09

DF30

5500-6100

2.09

DF40

5200-5800

2.09

DF50

5500-6500

2.09

DF60

4700-5300

2.42

DF70

5200-5800

2.42

DT85

5000-5600

2.08

DT100

5250-5750

2.08

115 EFI

5500-6000

2.08

140 EFI

5250-5750

2.08

150 EFI

5200-6000

1.86

225 EFI

5000-6000

2.59

DF90

4500-5500

2.59

DF115

5000-6000

2.59

DF140

5600-6200

2.38

DF200

5000-6000

2.29

DF225

5000-6000

2.29

DF250

5500-6100

2.29