section
22
Flares & Flare Kits Flare Container & Smoke Canister Safety Packs Fire Extinguishers & Fire Blanket Fireboy Fire Extinguishing Systems Lifebuoy Light, Lifebuoy Brackets & PFD Light Fire Bucket & Recessed Storage Boxes Lifebuoys, Rescue Sling & Reflective Tape First Aid Kits, ‘V’ Sheet & Torches Navigation Shapes, Code Flags & Radar Reflectors Gas Operated Horns & Safety Mirrors Paddles & Oars Rowlocks, Bailers, Oar Stops & Telescopic Paddles
451 452 452 453 454-457 458 458 459 460 461 461 462-464 464
www.bla.com.au
SAFETY EQUIPMENT
SAFETY EQUIPMENT
449
section
SAFETY EQUIPMENT
22
IKAROS FLARES Ikaros flares have been manufactured by Hansson PyroTech to the highest of safety standards since 1959 and meet all relevant approvals worldwide. The product range includes parachute flares, red hand flares, orange hand smoke flares, white hand flares and buoyant orange smoke canisters all suitable for pleasure or commerical use.
IKAROS
Handheld Rocket Flare Application: For long range distress signalling. The best signal in offshore kits for pleasure craft. Directions for use
1
222008
2
3
Trigger falls down
Remove bottom lid
Squeeze trigger against outer casing
Handheld Red, Orange & White Application: Red: Used to pinpoint your position particularly at night. Orange: Smoke flare primarily for day use. White: For use as a collision warning signal. Directions for use
1
222002
222006
222012
2
3
Hold the flare in your hand
Pull the top. The flare ignites after 2 second delay
Open the lid
Buoyant Smoke Application: Buoyant orange smoke signal designed for daylight use. Directions for use
1
222014
450
Quality marine equipment
2
Remove the lid
3
Pull the top
Throw the signal into the water
section
Inshore Flare Kit
For night use in particular, however can be used in daylight to raise alarm and pinpoint your position. Use only when potential rescuers are in sight. Burn time 60 seconds plus, producing a light intensity of 15,000 candela. Visible for up to ten kilometres on a clear dark night (conditions dependant).
Inshore flare kit supplied sealed in a polyethylene bag. Inshore flare kit contains two red hand and two orange hand smoke flares.
IKAROS
22
IKAROS IKAROS
Inshore Flare Kit This pack contains the following approved distress flares:
2 X Red Hand Flares • • • • • •
For night distress signalling May also be used in daylight Burn time > 60 seconds 15,000 cd light intensity Tactile marking (‘+’) on cap Australian Standard 2092 approved
2 X Orange Hand Smoke Flares • • •
BLA Code
BLA Code
For daylight distress signalling Burn time > 60 seconds Visible up to 4 kilometres (conditions dependent) Tactile marking (‘0’) on cap Australian Standard 2092 approved
The products contained within this package are listed on the National Register of Compliant Equipment www.bla.com.au BLA Code 222004 BLA, 45 Aquarium Ave Hemmant Qld 4174 Australia
N.B. Check local boating safety regulations
Orange Hand Smoke Flare
Offshore Flare Kit IKAROS
Offshore flare kits contain two red parachute rockets and two orange hand smoke flares.
BLA Code
BLA Code
IKAROS
Description
222005 Offshore Kit
222006
N.B. Check local boating safety regulations
White Hand Flare For use as a collision warning signal. Burn time 60 seconds plus, producing a light intensity of 2,500 candles.
• •
• Store in a dry accessible place • Keep away from children • Ensure all crew are familiar with operating instructions on labels • Use only in emergency • Outdoor use only • Dispose of correctly
222004 Inshore Kit
222002
For day use only to raise alarm and pinpoint your position. Use only when potential rescuers are in sight. Burn time 60 seconds plus and visible for up to four kilometres (conditions dependant).
Description
SAFETY EQUIPMENT
Red Hand Flare
Red Parachute Rocket Flare IKAROS
Easy to use, hand held, self contained rocket, ejecting a parachute suspended flare to 300 metres altitude. Visible range 15 kilometres or more by night. Red parachute flare is used for distress identification.
BLA Code
BLA Code
Colour
222012
222008 Red
Candela 30,000
TAS/SA Offshore Flare Kit
Trawler Flare Kit
Contains two red hand flares, two orange hand smoke and two red parachute rocket flares. Approved for Tasmania and South Australia.
Contains two red hand flares, one orange hand smoke and three red parachute rocket flares.
IKAROS
BLA Code
BLA Code
222020
222022
IKAROS
IKAROS
www.bla.com.au
451
section
SAFETY EQUIPMENT
22
Buoyant Orange Smoke Canister
Flare Container
A buoyant orange smoke signal designed for daylight use. Safe to operate on oil or petrol covered water. The simple pull cord ignition system releases a dense orange smoke for a period of three minutes plus.
A rigid poly container which is robust and suitable for storage of all flares and flare kits listed on previous page, and other emergency items.
BLA Code
BLA Width Height Depth Code mm mm mm
222014
222112
144
300
155
Opening Dia. mm 102
Safety Packs An unfortunate reality of boating is that safety equipment is all too often stowed out of sight and out of mind. These high visibility packs have all your essential safety equipment together in one ‘quick to grab in an emergency’ pack. The bags are manufactured from waterproof bright orange PVC with sealed seams. Because all your safety gear is in one neat weatherproof pack, it can be kept in view of crew for immediate access if required. An added bonus for trailerable boats stored in the open is that it is quick and easy to remove all your safety gear for storage in the house or garage. The table below details the contents of each pack.
BLA PFD 1 ‘V’ Sheet Code 226505 226509 226529
2 4 6
Waterproof Paddle Signal Torch Mirror
1 1 1
226502 Bag only 400x400x700mm 226504 Bag only 500x500x700mm
452
IKAROS
Quality marine equipment
1 1 1
2 2 2
1 1 1
Bag Size mm 400x400x700 400x400x700 500x500x700
section
22
Fire Extinguishers
• 0.6kg dry powder extinguisher with 1A:5B:E fire test rating • Head of fire extinguisher is manufactured from chromed brass, trigger from powder coated steel • Red plastic snap out mount bracket supplied with self adhesive and screw type fastening • Manufactured to AS1841:5
• Highest rated extinguisher for size • Dry powder • 1.5kg fire test rating 2A:20B:E • 2.5kg fire test rating 3A:40B:E • Head of fire extinguisher is manufactured from chrome brass, trigger and handle are chrome plated steel • Manufactured to AS1841:5
Suitable for: • A class - Wood, paper, cloth • B class - Liquids • E class - Electrical
Suitable for: • A class - Wood, paper, cloth • B class - Liquids • E class - Electrical
BLA Weight Height Dia. Mount Code Screws kg mm mm mm 227003 227006
1.5 2.5
355 425
90 120
227006
5 r/h 5 r/h
SAFETY EQUIPMENT
Fire Extinguisher
Fire Extinguisher BLA Height Dia. Mount Code Screws mm mm mm 226999
295
75
4 r/h
Fire Extinguisher • 1kg dry powder extinguisher with 1A:20B:E fire test rating • Head of fire extinguisher is manufactured from chrome brass, trigger handle from powder coated steel, bracket is red powder coated steel • Manufactured to AS1841:5 Suitable for: • A class - Wood, paper, cloth • B class - Liquids • E class - Electrical
• Highest rated extinguisher for size • 4.5kg dry powder. Fire extinguisher with 4A:80B:E fire test rating • Manufactured to AS1841:5 • Mines approval MDAFE2302 • SSL listed • Galvanised steel mount bracket • Head of fire extinguisher is manufactured from chrome brass, trigger and handle are chrome plated steel • Plastic hose retainer Suitable for: • A class - Wood, paper, cloth • B class - Liquids • E class - Electrical
BLA Height Dia. Code mm mm 227010
500
160
Mount Screws mm 5 r/h
Fire Blanket Manufactured from 100% woven glass fibre. Measures 1 x 1m when unfolded. Supplied in vinyl pouch with eyelet for wall mounting, ready for emergency situations. BLA Height Dia. Mount Code Screws mm mm mm
BLA Code
227001
227012
340
82
5 r/h
www.bla.com.au
453
section
SAFETY EQUIPMENT
22
Fireboy Extinguishing Systems Fireboy is a leading international manufacturer of fire extinguishing systems. Most boat fires start in the engine compartment and unfortunately this is normally a difficult and dangerous place to reach in the event of fire. A method to safely, quickly and efficiently extinguish these fires is essential. The Fireboy system provides near-instantaneous fire-response with maximum fire-quenching capability. Installed wherever protection is required i.e. engine rooms, electronic compartments, battery compartments and wiring terminal bus bar areas. Fireboy systems act much quicker than any possible human response could, as deployment is automatic once the system detects a heat source of significant magnitude to cause a fire, or be a fire, resulting in faster fire-out time and less damage. The automatic response is triggered at 79ºC, a heat response level that has been scientifically researched and backed by practical use in testing and in the field. There is no need to open doors or hatches as this only allows fire-building oxygen to do even more damage. Manual capability: A manual mechanical pull cable is available separately to enable remote manual activation if required.
How the system works using HFC-227ea The fire suppression agent used in Fireboy systems, HFC-227ea, suppresses fire by discharging as a gas onto the surface of burning material. Large amounts of heat energy are absorbed from the surface of the burning material, lowering its temperature below the ignition point, extinguishing the fire. Unlike other fire protection alternatives, HFC-227ea does not leave behind any residues, particulates, oily films, water or corrosive materials, so it will not cause collateral damage to your boat or its sensitive electronics. In addition, it is often possible to restart a Fireboy protected engine following a fire. Advantages of using HFC-227ea (Heptafluoropropane) compressed gas suppressant: • HFC-227ea does not displace ambient oxygen and therefore is safer for use in occupied spaces. • HFC-227ea is non-conductive. • HFC-227ea has a very high efficiency in terms of speed of reaction - fast and effective • HFC-227ea is environmentally friendly. It has been designed to replace the use of ozone depleting fire suppressants which work by striping the fire-inflicted area of oxygen - a dangerous implication for humans.
Total Quality Assurance Every Fireboy system is produced to the highest possible standards of reliability, using the finest quality materials: • HFC-227ea fire suppression agent, salt-resistant bronze, brass and stainless steel components • Tough, tempered, corrosion-resistant cylinders coated with epoxy enamel, anaerobic and epoxy sealants • 'O' ring seals at all critical assembly points • Stainless steel mounting brackets • All systems have a pressure sight gauge on the bottle and can be recharged by an authorised service agent
Testing Every Fireboy system is laboratory tested. Leaks as small as 2.8g of agent per year can be detected electronically. With Fireboy’s zero defect quality control program, no system is released that does not pass its tests. Extinguishant - HFC-227ea Heptafluoropropane Fireboy uses extinguishant Heptafluoropropane. It is TM manufactured by two companies: Dupont who brand it FE227 and Great Lakes Chemical Company who brand it FM200®.
N.B. When fitted to an engine compartment where diesel engines run, it is mandatory to fit the automatic engine shut down option
454
Quality marine equipment
section
22
Selecting Your System
Manual Discharge Cable: 3. I f required, select a manual discharge cable, of an appropriate length. Length is measured from handle operation position to extinguisher cylinder. Allow enough length so that the cable does not have any severe bends. BLA Code
Max Vol. Protected m3/ft3
Unit Unit Gross Dia. Height Wt mm mm kg
227202 227206 227210 227214 227218 227222 227226 227230 227234 227244 227254 227259 227264
1.4/50 2.8/100 4.3/150 5.7/200 7.0/250 8.5/300 10.0/350 11.3/400 14.1/500 21.2/750 28.3/1000 35.4/1250 42.5/1500
76 110 127 127 160 178 178 178 178 254 254 254 254
305 305 300 381 381 381 381 432 630 550 570 570 850
Engine Shutdown System: 4. Select the engine shutdown system, if required, to suit the number of circuits that need to be controlled. i.e. engine shutdown solenoid with two bilge blowers would use the three circuit system. System Status Panel Each system is supplied with a green warning light status panel, brackets for mounting and provisions for manual discharge control. Actuator Head Guard All Fireboys are supplied standard with a wire guard for installation over the actuator to protect against damage to the actuator.
1.4 2.7 5.9 6.8 9.1 11.5 12.5 14.0 19.0 27.8 29.7 36.5 44.9
SAFETY EQUIPMENT
Compartment size: 1. Determine volume of engine compartment in cubic metres: L x W x D. e.g., 1.65 x 1.27 x 1.88 = 3.94m3. 2. From table below, choose a system that meets or exceeds the measured volume of engine compartment. When in doubt, always choose larger size for extra protection. e.g. area measuring 3.94m3 would need 227210 (4.3m3). If the measured volume is greater than the volume covered by the systems in the table below, refer to GA systems on next page.
N.B. Engine shut down system must be installed on diesel powered vessels
Deluxe Discharge Alarm
Engine Shutdown Systems
The deluxe alarm provides round the clock discharge alert. It features an integrated alarm horn, a test button and visual lamp for simple single instrument installation.
Fire fighting gas suppressants will not stall a diesel engine. If fire breaks out in the engine room of a diesel powered vessel, the engine must be shut down immediately. An eight litre engine running at 2500rpm consumes 166 l/sec of air from the engine room. Continued operation of the engine after the extinguisher has discharged may remove the fire-suppressing agents creating the possibility of re-ignition. Fireboy engine shut down systems respond automatically when a Fireboy system discharges, providing electronic shutdown of up to 5 circuits, such as engines, bilge blowers, fuel pumps etc. All systems are solid state for reliability. The display unit has an integrated alarm horn, charged/discharged lights and an override switch for restart or control of auto shutdown.
BLA Code 227360
Wire Harness 9.1 metre wire harness to suit second station shutdown.
BLA Code 227422
Second Station Control Add a second station control and monitor to the engine shutdown system. Offers the same functionality as the primary station control. Install with wire harness 227422.
BLA Code 227410
BLA Code
Description
227364 227366 227376 227378
3 3 5 5
circuit circuit circuit circuit
-
24/32 volt DC 12 volt DC 12 volt DC 24/32 volt DC
N.B. Engine shut down system must be installed on diesel powered vessels
www.bla.com.au
455
section
SAFETY EQUIPMENT
22
Fireboy GA Series Pre-engineered total flooding fire extinguishing system for engine rooms from 45 to 85 cubic metres. The system is less expensive and easier to install than an engineered system. When any of the four sensors reach 79ºC, both tanks discharge, totally flooding the enclosed area. When one extinguisher discharges, the second extinguisher discharges within a fraction of a second. HFC-227ea fire suppressant agent, won’t damage engines or equipment. Approved for normally occupied areas, world wide accepted clean agent with zero ozone depleting potential.
The System A complete GA series system consists of twin extinguisher tanks, flex braided stainless steel hosing, twin overhead temperature sensors, fire resistant manual release cables, and an engine/equipment shut down. Components: •E xtinguisher Cylinders: Steel cylinders, Factory Manual approved for the GA Series working pressure and powder coated red for corrosion protection. Stainless steel, extra heavy duty, vibration tested mounting brackets; three per cylinder •S afety Lock Poppet Valve: Patent pending system that prevents accidental discharge during shipping, warehouse handling, and installation •G A Link: Flexible braided 316 stainless steel hosing with quick disconnect couplings for easy attachment/re-attachment to the cylinder valve •O verhead Temperature Sensors: Mounted over the engines to monitor ambient engine room temperature; trigger system discharge upon reaching 79ºC
Room
Optional Dual Release Adaptor Optional Remote Manual Release
•M anual Release Cables: High temperature, fire resistant manual release cables for remote manual system discharge; install one at each helm station and one at the engine room exit
Quick Connect
Quick Connect Sprinkler Heads (temp sensor)
Extinguisher 1
•D ual Release Adaptor: High temperature, fire resistant dual release cable kit enables two manual release cables to be connected to the manual system discharge of either cylinder
Extinguisher 2
Optional Remote Manual Release Pressure Switch to Shutdown
Optional Remote Manual Release
•E ngine Shutdown Controls: Automatically shuts down engines, generators, blowers, etc, upon system discharge; 3 or 5 circuit shutdowns available, 12VDC or 24/32VDC, refer previous page
Manual Release Cable Safety Lock Poppet Valve
GA Link
FM APPROVED System Specifications BLA Agent Cylinders Dia. Code Weight per (per cylinder) system mm 227266 227267 227268 227269 227270 227271 227272 227273 227274 227275 227276 227277 227278 227279 227280
14.8 15.7 16.6 17.6 18.5 19.4 20.3 21.2 22.1 23.1 24.0 24.9 25.9 26.8 27.7
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
254 254 254 254 254 254 254 254 254 254 254 254 254 254 254
Total Maximum Gross Cylinder Volume Weight Height Protected (per cylinder) mm m3/ft3 kg 660 660 660 660 660 812 812 812 812 812 940 940 940 940 940
45.3/1600 48.2/1700 51.0/1800 53.8/1900 56.7/2000 60.2/2100 62.3/2200 65.2/2300 68.0/2400 70.8/2500 73.7/2600 76.5/2700 79.3/2800 82.2/2900 85.0/3000
30.0 30.9 31.8 32.2 33.2 34.2 37.5 38.4 39.3 40.1 44.8 45.7 46.7 47.6 48.5
How to Order 1. C alculate the gross engine room volume by measuring the length, width, and height 2. Use the ‘Maximum Volume Protected’ column on the chart (left) to determine the cylinders required 3. Add the 227300 GA link and specify length of hoses A, B & C 4. Select the lengths of high temperature manual release cables needed by measuring from the control valve on the cylinder to the mounting point of the ‘T’ handle, including the bends, for both helm station and exit door 5. If two manual release cables are required to be connected to one cylinder select the 227359 dual release cable kit 6. Choose an engine shutdown based on the number of circuits that need to be shut down, 12VDC or 24/32VDC. Refer previous page
N.B. Fireboy GA systems are built to order. Order lead times apply. Please check delivery time prior to order
456
Quality marine equipment
section
22
GA Link
With a jacket capable of enduring extreme heat, these assemblies come complete with the required length discharge cable, installation hardware and panel mount. Length is measured from handle operation position to extinguisher cylinder. Allow enough length so that the cable does not have any severe bends. If the installation requires an angled pull, install angled bracket BLA code 306992 refer to section 30.
4mm braided stainless steel hose connecting the two cylinders. Incorporates two temperature sensors that can be installed directly above the engines. When ordering, please specify the length of hoses A, B and C to nearest foot.
Line A
BLA Code
Line C
Line B
227300
GA Dual Release Kit
BLA Cable Code Length m
BLA Cable Code Length m
227332 227334 227336 227338 227340 227342 227344
227346 227350 227352 227354 227356 227358
2.4 3.6 4.8 6.0 7.3 8.5 9.2
This kit enables two separately openable high temperature manual release cables to be fitted to either cylinder of a GA series fire system.
12.0 15.0 18.0 21.0 24.0 30.0
SAFETY EQUIPMENT
High Temperature Manual Release Cables
BLA Code 227359
Fire Alarm This detector will provide audible and visual fire warning for two sensors should the heat sensors detect heat in excess of the preset temperature probe selected. Features: • Complies with survey requirements • Compact, sealed flush mount control module • Easy to use LED backlit system status display for instant status recognition • Sealed, self contained module with touch switch controls for greater reliability • Incorporates effective audible and visual fire alarms, fault warnings and output for remote alarms • Easy to install, plug-in terminal on rear for zone detectors, and remote alarm ire alarms are supplied without sensors. Sensors are available at different heat trigger settings, 60ºC for F galley and 73ºC for engine room. A two sensor system may have one 60ºC and one 73ºC sensor fitted to monitor a galley and an engine room, but could also be fitted with two 73ºC sensors for monitoring two engine rooms in a catamaran. Dimensions: Face 48 x 96mm, intrusion 125mm.
227602
BLA Code
Description
227602 Two zone fire alarm module 227616 73ºC fixed temp sensor
Volt 12-24 12-24
Optional Remote Alarm Suits both the single and twin sensor models above. Features: • 110db audible and xenon visual alarms • 8 to 30VDC voltage range, 350ma drain • Flush mount, but also supplied with surface mount enclosure • Dimensions 160 x 110 x 125mm deep BLA Code
Description
227618
Remote audible and visual alarm
www.bla.com.au
457
section
SAFETY EQUIPMENT
22
Lifebuoy and Light Holder
Lifebuoy 'J' Hooks
Stores 225994, 226000 and 226004 lifebuoys as well as 226030 lifebuoy light, ready for immediate deployment in an emergency situation. Can be bulkhead or wall mounted and is also supplied with a rail mount adaptor to suit 22-25mm tube. Manufactured from stainless steel and U.V. stabilised plastic.
Stainless steel 'J' hooks to suit most lifebuoys, including 225994, 226000 and 226004. Sold as a pair.
BLA Height Depth Mount Code Screws mm mm mm 226012
125
6 c/s
Light Overboard - PFD • Personal manoverboard light • Automatic actuation when sensor contacts fresh or saltwater • Bright steady light of .75 cd intensity visible in all directions of the upper hemisphere • Attachment tab accommodates up to 50mm wide webbing • Exceeds eight hour operation time at -1ºC, lithium non replacement battery • USCG 161.112/54/0 SOLOS
BLA Height Depth Mount Code Screws mm mm mm 226010
300
140
5 r/h
Lifebuoy Light Solas approved, buoyant orange lifebuoy light which activates automatically with a continuous beam when turned to an upright position. Runs off four 1.5 volt 'D' cell batteries (not included). Lifebuoy Light Bracket (sold individually)
BLA Code
Stainless steel bracket with plastic tube clips. Supplied with rail mount adaptor to suit 22-25mm tube.
226052
226030 226031
BLA Description Code 226030 Lifebuoy light 226031 Lifebuoy light bracket
Height mm
Dia. mm
355
112
226032 Replacement bulb - old style push fit 124262 Replacement bulb - new style screw fit
Moulded Recessed Boxes Moulded from high quality, U.V. resistant, white ABS plastic with reinforced panel for either back or side mounting extinguisher, EPIRBS, etc. These attractive recessed boxes allow storage of emergency equipment within easy reach, without intruding into the cabin or cockpit.
458
185
BLA Code
O/all Width mm
O/all Height mm
O/all Depth mm
227030 227032
175 175
470 400
92 92
Quality marine equipment
O/all Width mm
O/all Height mm
O/all Depth mm
70
35
60
Fire Extinguisher Port Allows a standard fire extinguisher nozzle to be directed into an engine room, yet keeping the space confined under normal circumstances. Hole is sealed via a PVC diaphragm which you push in for use in emergency. Complies with EU guidelines (94/25 5.6.2) for recreational craft. BLA Code 227026
Outside Dia. Inside Dia. Depth mm mm mm 69
45
10
Fire Bucket Heavy duty nine litre galvanised bucket. Red in colour with 'FIRE' painted in white. Complies with Survey vessel requirements.
BLA Code 227040
Height Top Dia. mm mm 255
245
section
22
Horseshoe Lifebuoy
A simple but effective water retrieval device for vessel or water side facility. Consists of a flexible foam lifebelt with vinyl cover and 40 metres of 8mm recovery line, contained in a wall or rail mount PVC storage pouch. Quick reference instructions are clearly displayed on the pouch. Meets AYF requirements. Dimensions are in the stowed position.
Flexible closed cell foam inner with a polyurethane zip removable cover. Features full circumference cord with quick release hooks, reflective tape patches and pockets for storage of drogue and danbuoy line. Complies with AYF requirements.
BLA Code
BLA Code
Height Width Thickness mm mm mm
226002 470
300
150
226004
Height mm 520
Width Thickness Opening mm mm mm 590
95
300
Economy Life Ring
Lifebuoy
650mm outside diameter, foam filled PVC life ring. Coloured bands provide traditional appearance. Ideal for pool, decorative purposes, or pleasure craft. Not approved for Survey vessels.
SOLAS approved lifebuoy, seamless, rotational moulded polyethylene, closed cell foam filled. Supplied complete with rope grip and reflective tape. Listed on the NMSC Compliant Equipment Register.
BLA Code
BLA Code
225994
226000
Retro-Reflective Tape
Wooden Bungs
3M brand, high intensity, silver retro-reflective tape which can be used for safety equipment. Self adhesive, 51mm wide. Survey approved.
Set of ten soft wooden bungs (6 to 38mm) for emergency plugging of holes and through hull fittings.
BLA Code
Description
223602 223604
Per metre 50 metre roll
SAFETY EQUIPMENT
Rescue Sling
- Approved
BLA Code 223210
www.bla.com.au
459
section
SAFETY EQUIPMENT
22
Dinghy First Aid Kit
‘V’ Sheet
Supplied in Decor plastic container 205 (l) x 135 (w) x 50 (h) mm.
International distress sheet to suit safety requirements. Orange PVC construction with black 'V'. Supplied in vinyl bag.
Contains: 2 x disposable gloves, 1 x small scissors, 1 x 25mm conforming gauze bandage, 1 x small tweezers, 1 x 50mm conforming gauze bandage, 24 x Paracetamol, 1 x 25g antiseptic cream, 20 x plastic strips, 1 x 30ml antiseptic wash, 5 x alcohol swabs, 2 x disposable splinter probes, 20 x cotton buds, 5 x 15ml single use eyewash, 2 x gauze swabs, 1 x Handy Hints First Aid book, 12 x assorted safety pins.
BLA Code
BLA Code
224002
222140
Width m
1.22
1.83
Runabout First Aid Kit
Torch - Rubberised
Supplied in rigid plastic container with lock lid, 210 (l) x 140 (w) x 105 (h) mm.
Handle assists grip for cold wet hands. Chrome plated internal electric connections help protect against corrosion. Easy to use large thumb control. 'On' and 'Off' operating switch. Complete with adjustable length wrist strap. Krypton bulb. Takes ‘C’ size batteries, (not included).
Contains: 1 x 50mm conforming gauze bandage, 2 x 25mm conforming gauze bandage, 1 x triangular bandage, 1 x Handy Hints First Aid book, 5 x alcohol swabs, 5 x disposable splinter probes, 1 x small scissors, 3 x small non-adherent dressings, 24 x Paracetamol, 12 x assorted safety pins, 10 x disposable gloves, 3 x large non-adherent dressings, 1 x small tweezers, 1 x hypoallergenic tape 2.5cm x 9.1m, 20 x plastic strips, 1 x 30ml antiseptic wash, 2 x gauze swabs, 1 x 75mm crepe bandage, 1 x 25g antiseptic cream, 5 x 15ml single use eyewash.
BLA Code
BLA Batteries Length Lens Dia. Code mm mm
224004
223150
2
200
50
Cruiser First Aid Kit
Torch - Waterproof
Supplied in air tight container 270 (l) x 200 (w) x 100 (h) mm.
Featuring a six position adjustable stand, this powerful lantern has a soft textured casing and is non marking to fibreglass. Easy to remove head allows quick access to the six volt lantern type battery inside. 6 volt lantern battery included.
Contains: 2 x 25mm conforming gauze bandages, 20 x plastic strips, 3 x 50mm conforming gauze bandages, 24 x Paracetamol, 1 x 75mm hospital crepe bandage, 1 x 50g cotton wool, 1 x roll of 25mm zinc oxide plaster, 1 x 50g burn cream, 2 x 75mm square gauze swabs, 2 x rubber finger cots, 1 x 125mm stainless steel forceps, 12 x assorted safety pins, 10 x disposable splinter probes, 2 x calico triangular bandages, 1 x 50ml Mercurochrome, 1 x 125mm stainless steel scissors, 6 x small sterile non-adherent dressings, 1 x Handy Hints First Aid book, 1 x 30g Savlon antiseptic cream, 3 x large sterile non-adherent dressings, 1 x 100ml Calamine lotion.
460
Height m
BLA Code
BLA Code
224006
223170
Quality marine equipment
Multi Position Stand
section
22
Signalling Mirror
Pealess Whistle
Polished stainless steel mirror. Used to draw attention of potential rescuers for up to several kilometres. 72mm x 97mm.
Orange plastic pealess whistle, suitable for AYF and survey requirements.
BLA Code
229100
223200
Gas Operated Horns
Radar Reflector
Plastic acoustic horns supplied complete with a metal gas propellant canister. Push button operation. Non CFC propellant. A separately purchased snap in wall mount bracket is available to suit the 225002 horn.
Square aluminium plates that lock together with plastic end joiners to form a cube, resulting in strong radar reflecting properties. Stows flat when not in use.
BLA Code 225002 225008
SAFETY EQUIPMENT
BLA Code
O/all O/all Length Height mm mm 205 45
219 127
225004 Canister for 225002 225010 Mount bracket for 225002
225008
225002
Navigation Shapes Made of two piece black nylon construction. Easily disassembled for flat storage. • Ball - 300mm in diameter • Cone - 460 x 330mm Holes in base of cone shape allow two cone shapes to be joined to form a diamond shape.
BLA Code 229156
BLA Code
Shape
229110 229112
Ball Cone
Code Flags Yes and no answering pennants. Sold as set containing one 'N' and one 'C' flag.
Radar Reflector Aluminium radar reflector encased in protective nylon tube. Supplied with pivotal triangular nylon base allowing reflector to be folded flat or removed when not in use. An essential piece of safety equipment for commercial or recreational vessels operating in any shipping lanes.
BLA Code
BLA Length Diameter Base Code Mount mm mm mm
229020
229150
575
55
98x75
www.bla.com.au
461
section
22
Economy Double Ended Paddle
SAFETY EQUIPMENT
An ideal paddle for the family canoe or surf ski. Anodised aluminium shaft with yellow injection moulded plastic in-line scull blades
BLA Code 221042
Length m ft
Shaft Dia. Blade Size mm mm
2.13 6'11"
35
470x170
Double Ended One Piece Paddles Australian made, heavy duty anodised aluminium shaft with offset tough nylon scull blades. Available in five blade colours.
BLA Colour Length Shaft Code m ft Dia. mm 221044 221045 221046 221047 221050
Yellow Blue White Red Black
2.16 7' 2.16 7' 2.16 7' 2.16 7' 2.16 7'
29 29 29 29 29
Blade Size mm 180 180 180 180 180
Two Piece Kayak Paddle Made of heavy duty black EDC coated aluminium shaft with foam hand grips and PVC anti-drip rings these two piece kayak paddles have a simple spring action pin for quick and simple assembly as well as for three position 60ยบ - 0 - 60ยบ angle adjustments. Asymmetric nylon blades. Ideal for storage and compact transport.
BLA Length Shaft Code Dia. m ft mm 221049 2.20 7'3"
462
25
Blade Size mm 175
Quality marine equipment
section
22
Oars A combination of varnished wooden shaft, with turned 120 x 34mm handgrip, coupled with a durable moulded polypropylene blade. The 170mm wide blade has a slightly concave face for improved rowing efficiency. The shafts are turned to 41mm diameter to suit 221070 oar stops, however due to timber’s natural movement with moisture, this diameter can vary up to 1mm. Sold as a pair.
221001 221002 221003 221004 221005 221006
1.68 5’ 6” 1.83 6’ 1.98 6’ 6” 2.13 7’ 2.28 7’ 6” 2.44 8’
Double Ended Two Piece Paddle Double ended paddle with the choice of offset or straight blades at the push of a button. Black anodised aluminium shaft fitted with drip guards and hyperlon grips. Durable yellow moulded straight blades. Breaks down into two pieces for convenient storage.
BLA Code
Length Joined m ft
Shaft Dia. mm
Blade Size mm
221048
2.44 8
25
435x175
SAFETY EQUIPMENT
BLA Length Code m ft
'T' Grip Paddles Anodised aluminium shaft fitted with moulded black nylon 'T' grip and blade. Suitable for canoes etc.
BLA Length Code m ft 221051 221052 221054
1.23 4 1.45 4'9" 1.22 4
Shaft Dia. mm 32 32 25
Blade Handle Size Width mm mm 500x200 500x200 450x170
221051
104 104 104
Standard Paddle Economical paddle with anodised aluminium shaft and a black nylon straight blade.
BLA Length Shaft Code Dia. m ft mm 221060 1.22 4
25
Blade Size mm 450x170
www.bla.com.au
463
section
SAFETY EQUIPMENT
22
Telescopic Paddles
Bailing Scoops
Anodised aluminium shaft, polypropylene blade and comfort palm grip. Simple twist lock action extends or collapses the paddle in seconds. 221064 has a two stage telescopic action whilst the 221066 is three stage. Ideal for stowing in confined spaces and for use as an emergency paddle.
High flex plastic material to take years of punishment. Scoop shape to get the last of the water out.
223220
223222
BLA Code 223220 223222
Length Width Height Capacity mm mm mm litres 178 225
128 145
92 125
1 1.8
Rubber Oar Stops
221066
221064
BLA Colour Length Code mm
Shaft Dia. mm
221064 Black 770-1070 22/25 221066 Orange 530-1070 22/25
Three sizes of black rubber oar stops to suit most oars. 221070 suits BLA timber shaft oars. The oar stops are easily fitted by lubricating the oar shaft with detergent and sliding into place. Sold as a pair.
Blade Handle Size Width mm mm 375x170 50 300x160 100
Rowlocks and Holders - Black Nylon Economical alternative for lightweight dinghies. Proven strength (17mm shafts). Security tie holes in ends of shafts and twist lock rowlock holder help to keep the rowlocks on board. Rowlock suits oars/stops to 55mm diameter. Sold as a pair.
BLA Inside Outside Flange O/all Code Dia. Dia. Dia. Length mm in mm mm mm 221070 221072 221074
41 15/8 44 13/4 43 111/16
53 54 54
81 81 81
108 111 108
Rowlocks Galvanised. Sold as a pair.
221094
221090
221092
464
BLA Code
Description
BLA Style Stem Code Dia. mm in
221090 221092 221094
Plastic rowlock only Top mount rowlock holders Side mount rowlock holders
221080 221081 221082 221083
Quality marine equipment
Ring Ring Open Open
10 12 10 12
3/8 1/2 3/8 1/2
Stem Ring /'U' Length Inside mm mm 97 97 99 99
67 67 56 56