section
39
Cannon Down Riggers Cannon Down Rigger Accessories Taco Outriggers & Striker Bases Taco Outrigger Rigging Kits & Accessories Perko Outrigger Accessories Custom Tackle Stations Cutting Boards Berley Buckets & Livebait Tank Storage Bins Rod Holders Cutting Board & Rod Holder Accessories Fishing Knives Anchor Wells, Consoles & Bathyscope
658-663 664-665 666 667 667 668 669-671 671 672 673 674-675 675 676
www.bla.com.au
FISHING ACCESSORIES
FISHING ACCESSORIES
657
section
FISHING ACCESSORIES
39
SEE THE FISH
PRESENT THE BAIT
CONTROL THE DEPTH
FIGHT WEIGHT FREE
3 1
Jack of All Trades
1
Whether your’re trolling open water for Mackerel or pulling Snapper off structure, a Cannon Downrigger instantly gives you controlled depth and more accurately positioned bait presentation. No matter what species you’re after, fish have nowhere to hide.
2
“Run Deep” with the bottom-tracking abilities of Cannon to stay a consistent distance from the bottom - even when depth changes.
2
For total coverage of the water below, use a Uni-Stacker to fish at multiple depths off of a single weight.
3
Get the edge you need with our unique fish-enticing features, like cycling your downriggers up and down to raise and lower bait.
Getting the best from your Downrigger
1. 1. Set bait or lure to the desired distance you wish to troll it behind the boat 1.
5.
658
2. 2. Place the line into the release clip at a position suitable to the lines breaking strain 2.
3. 3. Loosen the clutch on the down rigger (manual models) and set the fishing reel to free spool 3.
4. 4. Lower the down rigger to the predetermined depth ensuring fishing reel does not over run 4. when being deployed
5.
6.
7.
8.
5.
6.
7.
8.
When correct depth is obtained tighten clutch on downrigger (manual models)
Quality marine equipment
6. Engage reel and wind the handle to create pressure on fishing line with pronounced bend in fishing rod
7. On hook up, line will automatically release from clip
8. Have fishing mate raise downrigger bomb
section
39
Cannon Mag 20DT/TS Downrigger
FISHING ACCESSORIES
The Mag 20DT/TS features a sleek white cosmetic finish. An extremely durable stainless steel spool allows for monofilament or “super line” use. Features a low-profile swivel base, rear rod holder and two line releases. Pre-spooled with 121.9 M of camouflaged 68kg test 316-grade stainless steel cable. Discover what your fishfinder and your downriggers are truly capable of when you use them together. The compatibility with the CannonLink™ Fishing System Module (sold separately) lets you operate up to six Mag 20DT downriggers directly from select Humminbird® fishfinders. Mounted at the helm, you’ll see where the fish are and be able to make instant depth adjustments without losing control of boat speed and steering – often the difference between missing a fish and landing the trophy of a lifetime. Features: • 76.2 metres-per-min. retrieval rate is the fastest in the industry • Positive Ion Control with adjustable voltage lets you regulate the fish-attracting electrical field around your boat • 9.7kg weight capacity • New IP 68 waterproof power cable connector • Short-Stop safely stops weight retrieval at waterline • Heavy-duty telescopic boom extends from 24" to 53" • Low-profile swivel base, rear rod holder (as shown) and two line releases • Three-digit depth counter • Ball storage hook prevents boat damage from swinging weights • Pre-spooled with 122metres of camouflaged 68kg test 316 grade stainless steel cable • Saltwater-resistant • Limited lifetime warranty
BLA Description Length Width Height Code m mm mm 394230 Mag 20 DT tournament series
1.8
215
530
Mount Screws mm 6r/h
Cannon Mag 10TS Downrigger The downrigger that serious boat skippers trust for its dependability and durability. They rely on its unparalleled toughness, the fastest retrieval rate on the market (76.2 metres per min.) and a Short-Stop feature that protects the boat from swinging weights. A low-profile swivel base (included) lets you quickly tend to your line without taking up excess room on the gunwale or rail. Smart, convenient design that maximizes performance and minimizes space. For the serious tournament angler, the Mag 10TS features a stylish metallic white finish and a stainless steel spool that’s tough enough to handle monofilament or today’s popular “super lines.” Features: • Metallic white cosmetics with stainless steel spool to allow for monofilament use • 76.2m-per-min. retrieval rate is the fastest in the industry • Positive Ion Control creates a fish-attracting electrical field around your boat • Short-Stop safely stops weight retrieve at waterline • Heavy-duty telescopic boom extends from 24" to 53" • 9.7kg weight capacity • Three-digit depth counter • New IP 68 waterproof power cable connector • Ball storage hook prevents boat damage from swinging weights • Low-profile swivel base, rod holder and line release • Pre-spooled with 122 metres of camouflaged 68kg test 316 grade stainless steel cable • Saltwater-resistant
BLA Description Length Width Height Code m mm mm 394232 Mag 10 tournament series
1.8
215
530
Mount Screws mm 6r/h
www.bla.com.au
659
section
FISHING ACCESSORIES
39
Cannon Uni-Troll™ 10TS Downrigger The Uni-Troll™ 10TS features a high speed retrival mechanism to maximise your fishing time and is engineered to last with a clutch/brake for safer weight descent and a ball storage hook to protect the boat from the cannonball. For tournament anglers, the Uni-Troll 10TS uses a monofilament ready stainless steel spool with camouflaged 68kg test stainless steel cable. Features: • High-speed retrieve raises weight 50% faster with reduced cranking effort • Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent • Three-digit depth counter • 24" to 53" heavy-duty stainless steel telescopic boom • Ball storage hook prevents boat damage from swinging weights • Rod holder and line release • Pre-spooled with 61 metres of camouflaged 68kg test 316 grade stainless steel cable • Saltwater-resistant • Limited lifetime warranty
BLA Description Length Width Height Code m mm mm 394236 Uni-Troll 10 TS tournament series 1.8
240
460
Mount Screws mm 6r/h
Cannon Digi-Troll™ IV HS Downrigger The Digi-Troll™ Series IV lets you take complete control. Utilise the cycle function to automatically jig the weight up and down, or use bottom tracking mode to keep weight at a certain distance from the bottom. Features: • Cycle function automatically jigs the weight up and down at a set depth/time interval • Memory storage remembers up to five different depths • Retrieve memory lets you program retrieve rates of 33.5, 45.7 or 76.2 metres per min • Bottom tracking mode keeps weight at a set distance off the bottom (with optional transducer – sold separately) and multiple downriggers can be networked to one transducer (with optional relay cables – sold separately) • 76.2m per min. retrieval rate is the fastest in the industry • Positive Ion Control with adjustable voltage lets you regulate the fish-attracting electrical field around your boat • 9.7kg weight capacity • New IP 68 waterproof power cable connector • Short-Stop safely stops weight retrieve at waterline • Low-profile swivel base, dual rear rod holder and two line releases • Heavy-duty telescopic boom extends from 24" to 53" • Three-digit depth counter Ball storage hook prevents boat damage from swinging weights • Pre-spooled with 122 metres of camouflaged 68kg test 316 grade stainless steel cable • Saltwater-resistant • Limited lifetime warranty BLA Description Length Width Height Code m mm mm 394222 Digi-Troll IV HS
660
Quality marine equipment
1.8
240
460
Mount Screws mm 6r/h
section
39
Cannon Mag 5HS Downrigger The downrigger that serious charter operators trust for its dependability and durability. They rely on its unparalleled toughness, the fastest retrieval rate on the market (76.2 metres per min.) and a Short-Stop feature that protects the boat from swinging weights.
FISHING ACCESSORIES
Features: • 24" heavy duty boom and a 76.2 metre-per-minute retrieval rate • 76.2m per min. retrieval rate is the fastest in the industry • 9.7kg weight capacity • Positive Ion Control creates a fish-attracting electrical field around your boat • Short-Stop safely stops weight retrieve at waterline • Three-digit depth counter • 24" heavy-duty boom • New IP 68 waterproof power cable connector • Ball storage hook prevents boat damage from swinging weights • Rod holder and line release • Pre-spooled with 76m of camouflaged 68kg test 316 grade stainless steel cable • Saltwater-resistant • Limited lifetime warranty
BLA Description Length Width Height Code mm mm mm 394234 Mag 5HS metric
940
240
280
Mount Screws mm 6r/h
Cannon Uni -Troll™ 10 Metric Downrigger The Uni-Troll™ 10 Metric features a high speed retrival mechanism to maximise your fishing time and is engineered to last with a clutch/brake for safer weight descent and a ball storage hook to protect the boat from the cannonball. Enjoy the added versatility and strength of 61 metres of camouflage stainless steel cable mounted on an ultra-durable telescopic boom on a low-profile swivel base. Features: • High-speed retrieve raises weight 50% faster with reduced cranking effort • Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent • Three-digit depth counter • Heavy-duty telescopic boom extends from 24" to 53" • Ball storage hook prevents boat damage from swinging weights • Low-profile swivel base, rod holder and line release • Pre-spooled with 61 metres of camouflaged 68kg test 316 grade stainless steel cable • Saltwater-resistant • Limited lifetime warranty
BLA Description Length Width Height Code m mm mm 394238 Uni-Troll 10 metric
1.8
215
300
Mount Screws mm 6r/h
www.bla.com.au
661
section
FISHING ACCESSORIES
39
Cannon Uni -Troll™ 5 Metric Downrigger The Uni-Troll™ 5 Metric features a high speed retrival mechanism to maximise your fishing time and is engineered to last with a clutch/brake for safer weight descent and a ball storage hook to protect the boat from the cannonball. Enjoy the added versatility and strength of 61 metres of camouflage stainless steel cable mounted on a 24" heavy duty boom. Features: • High-speed retrieve raises weight 50% faster with reduced cranking effort • Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent • Three-digit depth counter • Heavy-duty 24" boom • Ball storage hook prevents boat damage from swinging weights • Low-profile swivel base, rod holder and line release • Pre-spooled with 61metres of camouflaged 68kg test 316 grade stainless steel cable • Saltwater-resistant • Limited lifetime warranty
BLA Description Length Width Height Code mm mm mm 394242 Uni-Troll 5 metric
940
215
280
Mount Screws mm 6r/h
Cannon Easi-Troll™ HS Downrigger These hardworking, durable downriggers are ideal for smaller boats and fishermen just beginning to realize the advantage of fishing a downrigger. Our manual downriggers are built to deliver trusted Cannon performance while standing up to harsh saltwater conditions. The Easi-Troll™ HS use a clutch/brake for controlled, safe descent without cranking. The model features a durable copolymer boom and a convenient line release mounted on a tab-lock base. Break into downrigging with one of our highly capable manual models. Features: • High-speed retrieve raises weight 50% faster with reduced cranking effort • Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent • Quick mount tab-lock base • Three-digit depth counter • 24" copolymer boom • Pre-spooled with 45.7m of camouflaged 68kg test 316 grade stainless steel cable • Includes line release and tube style rod holder • Saltwater resistant • Limited lifetime warranty
BLA Description Length Width Height Code mm mm mm 394246 Easi-Troll 2 metric
662
Quality marine equipment
950
215
300
Mount Screws mm 6r/h
section
39
Cannon Lake-Troll Downrigger
FISHING ACCESSORIES
This hardworking, durable downrigger is ideal for smaller boats and fishermen just beginning to realise the advantage of fishing with a downrigger. Built to deliver trusted Cannon performance while standing up to harsh saltwater conditions. The Lake-Troll uses a clutch/brake for controlled, safe descent without cranking. Model features a durable copolymer boom and a convenient line release mounted on a tab-lock base. Break into downrigging with one of our highly capable manual models. Features: • Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent • Quick mount tab-lock base • Swivel-head depth counter • 18" copolymer boom • Pre-spooled with 30.5 metres of stainless steel cable • Includes line release and tube style rod holder • Saltwater-resistant • Limited lifetime warranty
BLA Description Length Width Height Code mm mm mm 394250 Lake Troll
830
215
245
Mount Screws mm 6r/h
Mini-Troll Downrigger Ideally suited to live baiting or trolling for Trout, Tailor, Salmon and many other estuarine, lake or shallow reef species in light current conditions. Cannon’s portable Mini-Troll downrigger mounts easily to transom, gunwale or rail to 63mm (2.5") wide with its ‘C’ clamp base. Both the frame and reel are manufactured from Lexan, with the horizontal manual reel spooled with 30m (100’) of test 54kg (120lb) stainless steel wire. Screw down control mounted in centre of spool governs free spool friction for controlled deployment and retrieval. Imperial depth counter located on boom end. Features: • Versatile “C” clamp base • Boom mounted depth counter • Saltwater resistant construction
BLA Description Code 394252 Mini-Troll downrigger
Length Width mm mm 490
130
Height mm 230
www.bla.com.au
663
section
FISHING ACCESSORIES
39
Mounting Base
Downrigger Gimbal Mount
MAG 20 DT Replacement or additional base mount for Cannon MAG 20 DT. Durable maintenance free Lexan construction. Supplied with stainless steel fastenings to mount to decks up to 6mm thick.
Black powder coated aluminium bracket that will mount any of the Cannon downrigger range, except Mini-Troll, into an existing rod holder. Pre-drilled to accept all bases. Solid 13mm thick top mount pad. Extra heavy duty 6mm wall thickness support tube. Stainless steel mount fastening included.
394362
Uni-Troll Built from heavy-duty Lexan for superior strength, and corrosion and U.V. resistance. This base is made for large body manual Cannon downriggers.
394354
BLA Height Mount Tube Code Pad Dia mm mm mm 394366 225 127x127 38 394370 305 127x127 38
BLA Height Width Depth Code mm mm mm 394354 394362
18 45
93 95
93 95
Mount Holes mm
Release Clips
6r/h 6r/h
Offshore Stacker Clip Adds the ability to fish at multiple depths off a single weight with the popular Offshore Line Release.
Line Release
Pinch-R-Release Clip Spring action clip available in a single format. Opens easily with finger pressure with an operating release range of between .9kg (2lb) and 5.4kg (12lb). The deeper the line is set back in the pads the greater the pressure.
Offshore Saltwater Corrosion-resistant, high-tension spring is designed for heavier saltwater lines. Troll at high speeds in deep water with its heavy duty release. Anti-fouling pins prevent line from snagging behind the gripper pads. Universal Two adjustment points enable the universal release clip to be precisely adjusted to release at 0.9kg (2lb) and 9.97kg (22lb), making this a versatile clip, whether you are trolling deep diving hard bodies or live baiting.
394400
394412
394404
BLA Description Code 394400 Offshore stacker release Cannon 394412 Pinch-R-Release
394402
BLA Description Code
Downrigger Weights
394402 Offshore release Cannon 394404 Universal line release Cannon
Cast lead downrigger weights brass attachment points. Designed for use on all downriggers.
Quick Release Clip
BLA Code
Available in single or twin stacker format, these clips are easily tensioned by rotating the small knurled knob on the side.
394430 394432 394434 394436 394438
Weight lb 4 6 8 10 12
394432
394428
BLA Code
Release
394424 394428
Single Stacker
394424
Termination Kit Suits all Cannon downriggers. Includes six crimpless snap-on terminators, six snap-on swivels and six cushion tops. Also available as terminator only.
Downrigger Wire Replacement stainless steel wire to suit Cannon downriggers. 394462
BLA Length Code m 394440 394442 394444
664
45 60 120
Break Load kg 68 68 68
Quality marine equipment
BLA Code
Description
394460 394462
Termination kit Termination only
394460
section
39
E-Z Release
Soft, non-abrasive backing and Velcro® enclosure allows for secure, protective fit on all large-bodied downriggers.
Convenient, one-handed, quick-load release. Features a three-click adjustment for a range of tension settings between .9kg to 3.62kg.
BLA Code
BLA Code
394340
394420
Rail/Side Mount
Clamp Mount
Built to secure downrigger to the “T” joints on rails of boats with narrow gunwales. Built with machined aluminium and powder coated to resist corrosion.
Secures downrigger to the gunwale or transom. Works with Sport-Troll™, Easi- Troll™ and Mini-Mag downriggers. Powder coated aluminium to resist corrosion. Maximum clamp opening 50.8mm.
BLA Length Width Height Code mm mm mm
BLA Length Width Height Code mm mm mm
394374 128
394378 115
128
105
102
FISHING ACCESSORIES
Cannon Downrigger Cover
90
Base Mount Tab Lock
Low Profile Swivel Base
Replacement or additional base mount for Cannon Sport-Troll or Easi-Troll. Manufactured from durable, maintenance free, U.V. stable Lexan.
Heavy duty Lexan and stainless steel swivel base. Six point locking, including two 45º positions. Suits MAG 20 DT, Digi Troll IV, Sport-Troll, Uni-Troll and Easi-Troll. Stainless steel mount fastenings included to connect to up to 6mm thick deck.
BLA Length Width Height Code mm mm mm
BLA Length Width Height Code mm mm mm
394350 145
130
35
Mount Holes mm
394358 189
6r/h
146
29
Mount Holes mm 6r/h
Digi-Troll Transducer
Relay Interphase Cable
When connected to the Digi-Troll IV this transducer enables the Digi-Troll to operate bottom tracking, a feature that allows the weight to maintain a precise distance from the seabed, to increments of 300mm. Includes mounting bracket.
When one Digi-Troll unit is connected to a Digi-Troll transducer, other units can be interphased with the master unit using this relay interphase cable. This allows all Digi-Troll units connected to the master unit to independently operate the bottom tracking feature, while only using one transducer.
BLA Description Frequency Beam Cable Code Angle Length kHz m
BLA Code
394320 Transducer
200
18˚
6
Description
394324 Interphase cable 394326 Relay cable Mag 20 DT
Length m 6 6
www.bla.com.au
665
section
FISHING ACCESSORIES
39
Telescopic Outriggers
Striker Outrigger Bases
Top quality poles for the serious offshore angler. Sold as a pair.
The Taco Striker flush through deck mounts feature solid cast all 316 stainless steel construction and incorporate a multi position, six point internal locking system. They are sized to accept Taco 28mm or 38mm outriggers. Sold as a pair. Features: • Ambidextrous arms will fit both port and starboard bases • 12 locking positions including stand up and lay down • Highly polished finish 316 grade stainless steel
Features: • Simple push button extension or retraction for convenient storage when towing or dry storing • Premium quality craftsmanship • Poles are anodised drawn aluminium • CNC precision machined gold anodised aluminium rings and tips • Stainless steel line guides • Internal delrin bushing for easy sliding without scratching • Delrin sleeve to base to prevent electrolysis • Made in USA • Available in 28mm or 38mm base diameter • 12 month warranty
394550
BLA Code 394550 394552
Outrigger Base ø mm
Mount Plate mm
28 38
130x66 150x100
394552
Outrigger Pole Holder - Deck Mount Removable tubes lift and turn to three positions; vertical, fishing and lowered. Stainless steel universal tubes with chromed zinc deck mount brackets, may be used on either side of the vessel. Sold as a pair (i.e. two tubes and two mounts).
Black anodised with gold rIngs and tips
BLA Code 403404
Tube ID mm 29
Base Mount Dim. Screws mm mm 127x63 6 c/s
Outrigger Pole Kit Complete kit contains one pair of 4.8 metre telescopic anodised aluminium poles, two trolling clips, two roller tips and two sets of line guides. Compatible with 403404 bases.
Outrigger Pole
Roller Tip Line Guide
Threaded Section
Line Guide
Stainless steel detent button for simple and secure locking
BLA Length Length Base Sections Colour Code Extended Retracted Dia. m m mm 394512 394518 394524 394530
666
3.5 4.6 4.6 5.6
1.6 1.7 1.7 1.8
Quality marine equipment
28 28 38 38
3 4 4 5
Black Black Black Black
BLA Height Base Sections Code OD mm mm 403410
4.8
29
4
Trolling Clip
section
Premium Rigging Kit
39
Rigging Accessories
Single line rigging kit to suit one pair of outriggers to 6.5 metres.
394588
394590
394592
394594
BLA Code
BLA Code
Description
394588 394590 394592 394594
Trip-ese release 'Blacks' release clip Shock cord with chromed snap and clear ring Shock cord with S/S snap hook and single pulley
FISHING ACCESSORIES
Inclusions: • 2 x Trip-ese releases • 2 x Shock cords with stainless steel snap hooks and pulleys • 2 x Barrel swivels • 4 x Snap swivels • 2 x Crimps • 2 x Stainless steel deck saddles and screws • 2 x Balsa floats • 30m x U.V. protected dacron line • All packed in mesh bag with clear front
394574
Outrigger Roller Tips Standard Rigging Kit Single line rigging kit to suit one pair of outriggers to 6.5 metres. Inclusions: • 2 x 'Blacks' releases • 4 x Shock cords with chromed snaps and clear rings • 2 x Barrel swivels • 4 x Snap swivels • 2 x Crimps • 2 x Stainless steel deck saddles and screws • 30m x U.V. protected dacron line • All packaged in a mesh bag
High impact plastic with nylon sheave. Stainless steel grub screw locates to top of pole. Sold as a pair. BLA Code 403412 403414
Tube Rope Sheave Dia. Dia. mm mm mm 16 20
4 6
22 22
Outrigger Line guides Line guides for outrigger poles. High impact black plastic body with 10mm ID stainless steel eye. Eye stem threads through base to locate on pole. Sold as a pair. BLA Code 403420 403422 403424 403426 403428
Tube Dia. mm 16 20 25 30 41
Outrigger Trolling Clip Trolling peg for use with outrigger poles. High impact black plastic with stainless steel eyes and spring. Jaws release line under strike load.
BLA Code
BLA Code
394578
403434
Length Width mm mm 70
35
www.bla.com.au
667
section
39
BLA Manufacturing Tackle Stations
FISHING ACCESSORIES
BLA manufacturing is proud to introduce a range bait stations. Manufactured in Australia from quality outdoor King Starboard and using top quality marine accessories, these bait stations will provide years of maintenance free use. BLA Manufacturing can custom design and build a wide range of products to your exact requirements and specifications. By utilising our in house CAD (Computer Aided Design) program each piece of King Starboard is meticulously manufactured using our CNC machine to produce the desired product. BLA manufacturing can produce for you virtually any size, shape and style of products using a range of quality materials you choose.
395850
395852
BLA Size Rod Drink Width Depth Height Suits Code Holders Holder mm mm mm 395850 395852
Small Large
2 6
1 2
N.B. Does not include pedestal height. Customised bait boards available.
668
Quality marine equipment
872 1275
385 612
319 464
Pedestal 183026 (not included) Pedestal 183026 (included)
section
Supreme Cutting/Bait Boards
39
- Rod Holder Mount
394832
394854
BLA Size Rod Width Depth Above Intrusion Code Holders Deck mm mm mm mm 394832 394834 394854
Medium Medium Large
2 4 4
770 1050 1320
430 430 500
330 330 330
394834
FISHING ACCESSORIES
All in one complete angler’s centre with easy installation and removal into two existing fixed rod holders. New quick release anodised aluminium rod holders that enable tension to be maintained on the line while removing the rod. Pivoting universal enables the cutting/bait board to set at a convenient working angle. Manufactured from super tough U.V. stabilised roto moulded polyethylene, aluminium, black HDPE and glass filled nylon so they can be simply hosed off to clean at the end of the days fishing. Cutting surface resists cuts and abrasions whilst retaining knife edge. All models include a recessed tray for storage of knives, tackle or offal run off, with the medium and large models featuring two recessed drink holders and storage trays.
200 200 200
Deluxe Cutting/Bait Boards Convenient drop in/lift out mount into two existing fixed mount rod holders. Manufactured from super tough moulded U.V. stable, roto moulded polyethylene, glass filled nylon and aluminium. Cutting surface resists cuts and abrasions whilst retaining knife edge. Features include fan pattern integral moulded rod holder slots, two drink holders and multiple storage recesses. 394860 includes a large storage compartment underneath the cutting surface of the board.
394856
394860
BLA Size Rod Width Depth Above Intrusion Code Slots Deck mm mm mm mm 394836 Medium 2 820 425 300 394856 Large 4 1170 425 280 394860 Large 4 1170 425 425 394870 Tray insert t/s 394860 cutting board
200 200 200
www.bla.com.au
669
section
FISHING ACCESSORIES
39
Standard Cutting/Bait Boards
- Rod Holder Mount
These versatile cutting boards simply drop into existing fixed mount rod holders. Manufactured from super tough moulded U.V. stabilised polyethylene and aluminium. Resists cuts and abrasions whilst retaining knife edge. Features a moulded in, recessed tray for storage of knives, tackle or offal run off. Medium and large models include two recessed drink holders and recessed storage trays. The medium size also has 2 rod holders incorporated. A twist lock pivot provides quick adjustment of cutting surface to horizontal and also allows compact storage.
394822
394850 394802
BLA Size Width Depth Code mm mm 394802 394822 394842 394850
Small Medium Large Large
525 715 910 1130
355 420 495 425
Above Deck mm
Intrusion Mount Legs mm
245 290 290 375
200 200 200 200
394842
1 2 2 2
Rail Mount Cutting/Bait Boards Manufactured from super tough moulded U.V. stabilised polyethylene, aluminium and 50% glass filled nylon. Resists cuts and abrasions whilst retaining knife edge. Features a catch measuring integral ruler, recessed tray for storage of knives, tackle or offal run off. Medium and large models also include two recessed drink holders and recessed storage trays. Mount brackets clamp onto 25mm diameter tube. Adaptor sleeves are also available for attachment to 22mm and 19mm OD tube.
394826 394806
BLA Size Width Depth Code mm mm
Above Rail mm
394806 Small 460 375 394826 Medium 720 425 394846 Large 950 430 394958 Adapter sleeve 22mm 394960 Adapter sleeve 19mm
180 220 220
394846 394958
Railblaza Baitboard Kit A stable, removable surface for cutting bait or cleaning the catch comprising of one board and two platforms. Features: • Adjustable angle, mountable on sloping surfaces • Portable to other StarPort™ locations • Mounts fold up for easy storage Two sizes: Small: 465 x 340 x 50 mm Large: 570 x 390 x 50 mm BLA Description Code 195600 195602 195604 195606
670
Small baitboard kit include mount Large baitboard kit include mount Small baitboard kit include mount & starport Large baitboard kit include mount & starport
Quality marine equipment
195604
section
Fish-n-Board
Cutting Board to Suit 20L Bucket
- Cutting Board
This versatile cutting board is truly a fisherman’s pal. The two grooves underneath the board allows the board to sit on a 20L bucket so it can be used not only as a bait/fillet board but a seat as well.
Bucket not included.
BLA Code 394800
Depth mm 359
Width Height mm mm 430
BLA Description Code 394880 Cutting board T/S 20L pail white
28
Berley Buckets - Marlin Board Mount
Live Bait Tank
Moulded in one piece high impact polyethylene. Mounts through marlin board or duck board. Supplied with heavy duty aluminium berley 'muncher'. Available in three models for differing transom heights. c
Ready to install, moulded polyethylene live bait tank. Supplied complete with transom mount water pick-up and 12volt submersible pump. Incorporates storage recess hinged lid. 20mm overflow outlet with filter and 20mm inlet that connects via hose (not included) to the pump.
FISHING ACCESSORIES
Injection moulded from U.V. stabilised high density polyethylene. Ideal for cutting up bait or scaling and filleting your catch. Features integral knife holder, 40cm ruler, moulded drains for ease of cleaning (which can also be used for berleying) and full stainless steel mount hardware to suit rail or gunwale mount.
39
b
a
BLA Model Code
a b c mm mm mm
395050 Small 395052 Short 395054 Long
195 400 125 195 450 170 255 450 170
395090 Spare berley muncher
BLA Code
Length Width Height mm mm mm
395202 585 340 335 193666 Replacement hinges N.B. Pump is not self priming, requiring gravity feed.
Berley Bucket - Transom Mount
Berley Buckets - Removable
Economy 'D' shaped transom mount berley bucket moulded from one piece high impact polyethylene. Permanently through bolt mounts. Aluminium 'muncher' included.
Moulded in one piece high impact, U.V. stable, roto moulded polyethylene. An alloy mounting bracket with twist lock stainless steel pin provides ease of removal for cleaning, storage or for when the vessel is not being used for fishing. Designed for raked transoms of 20Âş. Supplied with berley 'muncher'.
BLA Code
Height mm
Width Depth mm
mm
395060 435 195 190 395090 Spare berley muncher
BLA Height Dia. Code mm mm 395070 360 395072 450
165 175
Mount Base mm 195x105 150x105
395090 Spare berley muncher
www.bla.com.au
671
section
FISHING ACCESSORIES
39
Tinnie Storage Bin Standard Long & Deluxe Long
Tinnie Storage Bins The small storage bin and large tinnie storage bin provide smart storage for odds and ends, fishing gear and bait. Moulded from tough polyethylene, the curved bracket fits securely over the gunwale of most tinnies. They incorporate a recessed storage area, drink holder and knife slots.
Manufactured from tough polyethylene, these storage bins are large, durable and easy to clean. They provide smart storage for fishing gear, baits or general storage. The deluxe version features a side pocket and drink holders. 395006
395010
BLA Size Code 395002 395006
Small Large
Width Height Depth mm mm mm 380 360
200 290
395002
205 240
BLA Description Code 395010 Tinnie storage bin standard long 395014 Tinnie storage bin deluxe long
Fish/Bait Boxes
Tinnie Storage Tube
Manufactured from white polyethylene with white cutting board lid. Ideal for use as a bait box, fish box, livewell tank or simply for storage.
This waterproof storage bin is ideal for storing mobile phones, watches, flares, etc. It can be flush fitted either horizontally or vertically into any surface behind which is a suitable cavity. Height mm: 250 Diameter mm: 170
BLA Code
Length mm
Width Height Cut Out mm mm mm
395222 300 200 395224 300 200 395228 300 200 395232 395 280 395236 400 280 193666 Replacement hinges
270x170 250 270x170 355x250 360x245
BLA Description Code 395020 Tinnie storage tube
Collapsible Storage Box
Plastic Storage Bins
Convenient folding storage box, folds to only 65mm high! Four folded boxes use less space than one rigid box, so they will stow away easily, yet are readily available. Very solid construction and design with a weight of only 2 kgs.
One hundred and one on board uses including catch bucket, bait bucket, anchor tackle storage, tools or general storage. Ideal for portable live well bait tank setup. Tough yet light weight thermo moulded plastic. Available with or without lid.
BLA Code 394990
672
190 215 295 180 325
Length Width Height mm mm mm 600
400
315
Quality marine equipment
BLA Description Length Width Height Code mm mm mm 394998 394999
Lidded Non lidded
660 790
425 500
275 310
section
39
Quick Release Rod Holders
BLA Description Code 394658 394690 394694
FISHING ACCESSORIES
Quick Release Rod Holders enable tension to be kept on the line while removing the rod after hook-up. The support post mounts in existing rod holder with an ID between 36 & 43mm. Available in single and triple configurations, manufactured from anodised aluminium and U.V. stabilised polyethylene.
394658
O/all Dim. W x D x H mm
Triple centre 465 x 285 x 460 (closed) Triple starboard 465 x 270 x 460 (closed) Triple port 465 x 270 x 460 (closed)
394690 Starboard Side Mount
394694 Port Side Mount
3-in-1 Rod Holders Three rod holders in one. Available in standard and quick release models and rail mount configuration or to fit in a conventional fixed rod holder. Quick release model enables tension to be kept on the line while removing the rod. Manufactured from black HDPE plastic, 50% glass filled nylon and anodised aluminium.
100
394666
BLA Configuration Mount Release Code
O/all Dim. W x D mm
394666 394682
510 x 265 510 x 255
Triple centre Triple starboard
Rail Rod holder
Quick Standard
Coaming Rack Holders Manufactured from black HDPE and anodised aluminium. Enables neat rod storage on board, at home or in the garage. Rod holders can be positioned anywhere along the rails to suit individual requirements.
BLA Capacity Length Height Depth Code mm mm mm 394720 Four rod 394722 Six rod
585 775
225 225
78 78
www.bla.com.au
673
section
FISHING ACCESSORIES
39
Saddles T/S Cutting Board Mounts
Post Assembly
Black plastic Saddles for use with cutting board mount.
Post Assembly to suit cutting board – Rod holder mount. Attaches on the cutting board swivel and fits into a standard rod holder. Contains: • 300mm, 32 x 1.6mm anodised tube • Bottom cross 394944 • Taper spacer 394942
394930 394932
BLA Code
• Swivel set 394946 • Stainless nut and tri-wheel 394947
Description
394930 Saddle adjustable 394932 Saddle end
Tapered Spacer
BLA Code
Used on post assembly to ensure that the posts fit securely into the boats rod holders. Designed to fit on 32mm tube.
394940
Bottom Cross Bottom Cross attaches to the post assembly and locks into the bottom of the boat's standard rod holders. Designed to fit into tube with an inside diameter of approx. 29mm.
BLA Code 394942
Swivels Used to adjust bait boards and accessories to the required angle. Male ends of the swivel set are designed to fit into 32 x 1.6mm tube (i.e. approx. 29mm inside diameter). Sold as a pair.
BLA Code 394944
Tri Wheel & Nut Used to adjust the swivel to level bait boards and accessories depending on the angle of the boat's rod holders.
BLA Code 394946 394947
Rail Mount BLA Description Code
Supplied with rail clamp to suit 25mm tube. Manufactured from 50% glass filled nylon. Utilises six stainless steel metal threads and nuts for attachment. Suits products with a 28mm post.
394948
394947 Tri wheel & nut 394948 Tri wheel spring
Pivot Joint Kit 75
Used in conjunction with the rail mount. Converts fixed mount products with a tube I.D. of 28.5mm to swivelling. Manufactured from 50% glass filled nylon and stainless steel.
100
160
40
674
BLA Code
Mount
394950 394958
Rail mount Sleeve to fit 22mm rails
Quality marine equipment
BLA Code 394954
28
section
39
Filleting Knife - Floating
Kit includes a rod holder, 1.8kg flash weight and Uni-Line Release for the Mini-Troll™ downrigger.
Floating fish filleting knife with fluorescent orange handle top. The flexible stainless steel blade is 136mm long. Overall length of knife is 265mm. Supplied with a plastic scabbard which has a stainless steel belt holder.
BLA Description Code 394470 Accessory kit t/s mini troll Cannon
Dual Rod Holder Front Mount Fits all 32mm Cannon booms (including the telescopic boom). Two independently adjustable rod holders are made with gimbal and drain hole. Comes with two aluminium tube clamps and a dual mounting bracket.
BLA Code 394792
Fishing Knife Set
- 9 Piece
Complete fishing knife and accessories set for everyday use. This set includes one each of the following items: • Filleting knife with flexible 145mm stainless steel blade • Carving knife with strong 145mm stainless steel blade • Divers knife with 110mm stainless steel blade, scaler and bottle opener BLA Description Code
• Large hand sheers stainless steel blades and cracker
394482 Rod holder dual front mount Cannon
• Scales with retractable tape measure and compass
• Holding fork • Convenient, easy to use knife sharpener
Dual Rod Holder Rear Mount
• Non-slip gloves
For fishing two rods off the same downrigger, these two independently adjustable rod holders fit into standard Cannon tube clamp.
• Large 280x190mm plastic cutting board
FISHING ACCESSORIES
Mini-Troll™ Accessory Kit
• Convenient plastic carry case
BLA Description Code
BLA Code
394484 Rod holder dual rear mount Cannon
394786
Adjustable Rod Holder
Rod Holders
Three-position configuration delivers fast baitcast or spinning rod pickup. Spring-loaded tension knob allows for quick rod adjustment. Its 360° base can be top or side mounted.
This single unit comprises of a quick release rod holder manufactured from black HDPE. Fitted with a sturdy adjustable base (394642) which clamps to a 25mm boat rail. Fitted with a sturdy adjustable base (394646) which is designed to fit into a single existing rod holder.
BLA Description Code 394480 Rod holder Cannon
Knife Holder Handy knife holder keeps the knives secure and safe when not in use.
394700
394642
BLA Description Code BLA Description Code 394794 Knife holder white
394642 Rod holder single QR rail mount 394646 Rod holder single pistol grip QR rh Mnt 394700 Rod holder single (holder only) t/s Sant Marine 394704 Rod holder single QR (holder only)
www.bla.com.au
675
section
FISHING ACCESSORIES
39
Anchor Wells
Side Console
Moulded white polyethylene anchor well. Simply cut required hole in foredeck and rivet or screw into place. Fitted with 20mm diameter take-off for drain.
Converts vessel from tiller control to side console quickly and easily. Features hinged storage lid, two drink holders, sounder/GPS mounting area and ample room for steering, gauges and electrical requirements. Supplied complete with anodised aluminium support legs and mounting fittings. High impact, durable U.V. stable roto moulded polyethylene top.
Console completed
BLA Model Code
Rear mm
Side mm
395350 Small 395352 Large
540 730
360 460
Front Depth mm mm 340 450
200 250
Console uncompleted
Bathyscope
BLA Height Width Depth Code mm mm mm
A simple but effective device that eliminates water surface reflection, to allow under water viewing as far as water clarity and light permits. Works in two ways, firstly the clear acrylic lens breaks through the water surface reflection, secondly the light blocking cone, with soft rubber face piece, eliminates reflection on the lens, to provide clear viewing. Breaks down into four interstacking pieces for compact storage. Ideal for reef viewing, checking pots/traps without disturbing, checking moorings, etc. 510 (h) x 335 (dia) mm assembled.
395300 360
600
360
Sant Centre Console Sant Marine console kits converts vessel from tiller control to centre console quickly and easily. Ample room available for steering wheel and engine control, sounder/GPS, instruments and electrical requirements. Constructed of U.V. stable roto moulded polyethylene and provided with two drink holders.
BLA Code 395650
Fish Scaler - Plastic
Console completed
A tough, non corrosive plastic economical fish-scaler that is designed for the most demanding use.
Console uncompleted
BLA Description Code BLA Description Code 394798 Fish scaler blue plastic
676
Quality marine equipment
395310 Console centre mount 395314 Grab rail t/s centre console 395318 Windscreen t/s centre console