Minn Kota Brochure 2010 by BLA

2011 CATALOGUE WIRELESS gPS TRoLLIng SySTEm

THE NAVIGATION REVOLUTION www.minnkota.com.au www.minnkota.co.nz

contents Advantage Minn Kota®

PowerDrive V2

Accessories

Fortrex

i-Pilot

Riptide® ST Bow Mount Saltwater Terrova

Prop Selection Chart

Traxxis

Motor Selection Chart

Riptide® SP Bow Mount Saltwater Powerdrive

Minn Kota Pro Team

E-Drive

Competition Successes

Riptide® Transom Mount

Canoe Transom Mount

Battery Chargers

i-Pilot / Copilot

Riptide Engine Mount ®

Trim Tabs 2

Endura

YoU jUst KnoW WHen soMetHInG’s MAde A LIttLe betteR. Minn Kota ® is the world’s leading manufacturer of electric trolling motors. With uncompromised durability and quality, Minn Kota ® motors stand up in the most demanding conditions. Offering a complete line of electric trolling motors, battery chargers, trim tabs and marine accessories. You can rely on Minn Kota ® products to take you AnYWHeRe. AnYtIMe.

Minn Kota® i-Pilot

WIRELESS gPS TRoLLIng SySTEm

tHe nAVIGAtIon ReVoLUtIon

What’s this? This is a QR Code (Quick Response Code). Which allows you to view Minn Kota® video clips from your web enabled mobile phone. Step 1: Download your free phone app from qrcode. kaywa.com Step 2: Scan the code from your mobile phone using the camera.

neW i-PILot Is on boARd SEE PagE 6 & 7

EvEry aspEct of a Minn Kota ® Motor is thought out and rEthought until it’s good Enough to bEar our naME.

advanCed COrrOSiOn prOteCtiOn.

Riptide® motors are impervious to saltwater’s corrosive effects, thanks to premium-grade marine alloys and aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil TGIC polyester, powder coat paint. When it’s all done, you’re left with unequaled corrosion protection.

fUlly enCapSUlated eleCtrOniCS.

Marine-grade urethane fully encapsulates 1 Riptide ® control boards to protect the 2 electronic circuitry. Also, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against saltwater. 1

E-coated epoxy primer Anodized or dichromate armor plating Premium marine alloy cleaned with 7-step process

Up tO five timeS lOnGer rUn time On a SinGle CharGe.

Stay on the water longer with Digital Maximizer. Instead of wasting energy with a constant flow of power, Digital Maximiser delivers only what’s needed: a precise amount of power at any setting – along with variable speed control – that optimises draw to extend battery life and reduce damaging heat.

indeStrUCtible COmpOSite Shaft.

Silent OperatiOn. COOl pOwer.

Nothing runs cooler or more quietly than Minn Kota®. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power and longer motor life. Our unique bearing system reduces friction to cut fish-spooking noise. So quiet they’ll never hear you coming.

riptide St i-pilOt

5-mil TGIC polyester paint

Minn Kota’s® indestructible composite shaft is impervious to the corrosive effects of saltwater. Pound for pound stronger than stainless steel, will not break, kink or corrode, and does not contribute to galvanic corrosion. guaranteed for life!

riptide Sp

riptide tranSOm

enGine mOUnt

sALtWAteR RAnGe

ADVANTAGE MINN KOTA Fish Don’t stanD a ChanCe.

You don’t think too much about advanced digital microprocessing. Ultra-high-yield composite materials probably don’t dominate your dinner conversation. But these are just some of the things that work together to make our motors out perform and out last any other trolling motor on the water. They’re the result of countless hours of research and testing, and they’re the advantages that allow a Minn Kota® to truly take you “Anywhere. Anytime.”

weedleSS wedGe tm 2.

COpilOttm : the wOrld at yOUr finGertipS.

Only a Minn Kota® can push weeds away and take on the thick stuff without batterydraining chopping and hacking. We’ve improved on the legendary Roland Martin design with swept-back, flared blades for unrelenting, reliable prop performance.

There’s no need to clutter up your deck with a foot pedal when you arm yourself with the CoPilotTM remote. CoPilotTM gives you the freedom to fish from anywhere on the boat – even the platform – and allows you to control on/off, speed and steering – all from the palm of your hand. Standard on Riptide® ST and optional on SP and PD motors.

bOwGUard 360°tm break away mOUnt.

aUtOpilOt: Stay the COUrSe.

Constantly repositioning and redirecting your boat wastes valuable fishing time. That’s why our patented AutoPilot system (available on Riptide® ST and some SP motors) does the hard work of navigating for you. Lock AutoPilot onto your desired heading, and let it automatically and continuously make adjustments to keep your boat moving in the right direction.

This patented mount breaks away on impact from any angle, then automatically resets itself. You get uninterrupted fishing and an extra measure of safety from damaging your trolling motor or boat. Detaches for added portability and easy storage. Only from Minn Kota®.

new wireleSS GpS trOllinG SyStem

Don’t waste another minute positioning your boat. i-Pilot uses GPS technology to control your trolling motor for you so you can focus on fishing. It can lock onto a productive fishing spot and keep you there, remember a successful path, optimize your bait presentation with cruise control, and more. All with wireless control, GPS accuracy and the mission of making you better at what you love to do: catch fish.

fOrtreX

pOwerdrive v2

e-drive

traXXiS

endUra

FResHWAteR RAnGe

Watch Minn Kota® Fortrex in action tM

NEW WIRELESS GPS TROLLING SYSTEM here’S hOw i-pilOt makeS yOU a better anGler. start reCOrd a traCk.

Simply push the Record button and fish along your desired course. i-Pilot will store that track to memory (up to three separate tracks). When you want to retrace a course, i-Pilot’s Playback functions will automatically guide your boat along the track.

End reCOrd a traCk: i-Pilot can record your track (start to end),

for up to two miles. To retrace your path in either direction, just press the Track to Start or Track to End buttons.

SpOt-lOCk.

Spot-Lock works like an electronic anchor. Choose up to three separate spots for i-Pilot to remember, and at the push of a button, it will correct for wind or currents to hold you in place. Spot-Lock Recall lets you return to your spot later, from up to a quarter mile away.

5 ft

SpOt-lOCk: Select your spot,

and if you drift more than five feet away, i-Pilot will trigger your trolling motor to bring you back.

i-PILOT

the naViGation ReVoLUtion. Don’t waste another minute positioning your boat. i-Pilot uses GPS technology to control your trolling motor for you so you can focus on fishing. It can lock onto a productive fishing spot and keep you there, remember a successful path, optimize your bait presentation with cruise control, and more. All with wireless control, GPS accuracy and the mission of making you better at what you love to do: catch fish.

CrUiSe COntrOl.

i-Pilot’s cruise control function gives you unparalleled bait presentation by maintaining your actual on-the-water speed (in miles per hour) and allowing you to adjust your speed in 1/10 thmile-per-hour increments.

advanCed aUtOpilOt.

Simply point your trolling motor in the direction you want to head and activate Advanced AutoPilot. i-Pilot keeps you on your heading and delivers you there with GPS accuracy, while compensating for wind, waves, currents or drift.

COpilOt.

the remOte.

Control speed, steering, on/off and high-speed bypass – our legendary CoPilotTM functions – from your i-Pilot remote. Free yourself from the foot pedal and fish from anywhere on the boat.

i-Pilot accessory is available for Riptide® ST, Riptide® SP, PowerDrive V2 bow-mount trolling motors. (2007 on) TM

featUreS minn kOta’S twO-year warranty ®

i-Pilot’s clear, integrated, backlit LCD screen delivers instant feedback on active functions, speed, prop on/off status, battery power and GPS signal strength. All encased by a watertight, fully gasketed remote. Includes lanyard and carabiner. bla code

description

601497

RIPTIDE RT55ST I-PILOT 54” 12V

601499

RIPTIDE® RT80ST I-PILOT 54” 24V

602967

IPILOT KIT TO SUIT POWERDRIVETM V2

602968

IPILOT KIT TO SUIT RIPTIDE® ST

602969

IPILOT KIT TO SUIT RIPTIDE® SP V2

602970

REPLACEMENT I-PILOT TRANSMITTER

Lake Glenbawn, NSW

MEGABUCKS 2010

minn kota bream megabucks i-pilot wins 1st place tasmania bream angler of the year 1st place

i-pilot wins 1st place Champion visiting team

i-pilot wins 1st place

i-pilot wins 1st place i-pilot wins 2nd place

RIPTIDE ST Drop In UnexpecteDly.

Watch Minn Kota速 Riptide速 in action

S A L T W A T E R

available thrUSt levelS 80

RIPtIde st

We put Riptide® ST to the test, because we know you will. You need a motor that runs with a combination of stealth silence and unrelenting toughness. One that won’t spook fish, or back down from even the most extreme conditions. The ST is supplied standard with i-Pilot. i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control, and give you command of speed, steering and Advanced AutoPilot. i-Pilot will give you unprecedented navigation and boat positioning. We know saltwater anglers never turn down a challenge. As it turns out, neither do we.

MOTORS

RIPTIDE SALTwATER TERROVA (ST)

B O W - M O U N T

SpeCifiCatiOnS COntrOl i-PILOT

Shaft lenGth 54"

prOp WEEDLESS WEDGE 2

COmpOSite Shaft YES

diGital maXimizer YES

COOl, QUiet pOwer YES

StOw. deplOy. repeat.

Easy in. Easy out. Everyday. That’s the thought behind Riptide® ST’s innovative stow/deploy mechanism. The balanced motor design makes stowing easy, and a master cutoff switch automatically turns off the power when stowed.

Opti OptiOnal fOOt pedal. 602964

Simply depress the handle on the mount. Fallaway ramps effortlessly deploy the motor into the water.

bla code

AutoPilot “ON”/“OFF”

description

601497

RIPTIDE® RT55ST I-PILOT 54" 12V

601499

RIPTIDE® RT80ST I-PILOT 54" 24V

Momentary/Constant “ON”/“OFF” Heel/toe steering

accessories

Left steer

602964

FOOT PEDAL CORDED T/S RIPTIDE® TERROVA

602970

REPLACEMENT I-PILOT™ TRANSMITTER

603009

QUICK RELEASE BKT SP & PD/V2 QRB WHITE

Right steer

603017

QUICK RELEASE BKT WITH COVER

603041

PROPELLER WEEDLESS WEDGE 2 MKP-32 T/S RT55ST

Infinite speed control

603042

PROPELLER WEEDLESS WEDGE 2 MKP-33 T/S RT80ST

607031

ANODE T/S RT55ST

607030

ANODE T/S RT80ST

607392

SHEER PIN T/S RT55ST

608201

SHEER PIN T/S RT80ST

Momentary on

diGital maXimizer.

Up to five times longer run time on a single charge. 9

RIPTIDE SP tHe poWer to Be coUnteD on.

MOTORS

RIPTIDE SALTwATER POwERDRIVE (SP) Get optimized saltwater performance with Riptide® SP’s re-engineered electric steer control, new deploy-assist lever, and a host of features that set the standards for power and control. new OptiOnal i-pilOt wireleSS GpS trOllinG SyStem.

S A L T W A T E R

* By adding i-Pilot you will no longer have use of the foot pedal on SP motors.

aUtOpilOt: ready. Set. fiSh.

B O W - M O U N T

Point the motor in the direction you want to go, then activate the AutoPilot button. It’s that easy. AutoPilot automatically keeps you on course, even through rough conditions. Not available on 601450.

RIPtIde sP

i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control, and give you command of speed, steering and Advanced AutoPilot. Optimize your Riptide® SP with i-Pilot, for unprecedented navigation and boat positioning.

GO remOte with OptiOnal COpilOttm .

Control speed and steering from anywhere on the boat with our wireless remote.

available thrUSt levelS 70

SpeCifiCatiOnS COntrOl ELECTRIC STEER FOOT PEDAL

Shaft lenGth

OPTIONAL

48", 54"

prOp WEEDLESS WEDGE 2

SELECTED MODELS

COmpOSite Shaft YES

diGital maXimizer YES

COOl, QUiet pOwer YES

deplOy-aSSiSt lever.

Riptide® SP’s deploy-assist lever puts you in motion and in pursuit of fish quickly and easily. When you depress the lever, the motor deploys and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action whenever you are.

Standard fOOt pedal.* 602960 Speed control

bla code

Momentary/Constant “ON” switch

description

601450

RIPTIDE® RT55SP/FP 48" 12V INCL PEDAL

601484

RIPTIDE® RT55SP/FP/AP 54" 12V INCL PEDAL

601490

RIPTIDE RT70/SP/FP/AP 54" 24V INCL PEDAL

Right Momentary button

accessories 602969

I-PILOT KIT T/S RIPTIDE® SP

602970

REPLACEMENT I-PILOT TRANSMITTER

602982

WIRELESS COPILOT KIT T/S RTSP

602977

REPLACEMENT COPILOT T/MITTER SP&PD/V2

602958

WIRELESS FOOT PEDAL KIT T/S RTSP

602956

REPLACEMENT W/LESS F/PEDAL T/S SP&PD/V2

602960

FOOT PEDAL CORDED T/S RIPTIDE® SP

603009

QUICK RELEASE BKT SP&PD/V2 QRB WHITE

603004

QUICK RELEASE BKT SP&PD/V2 MKA16-02 BLK

603017

QUICK RELEASE BKT WITH COVER

603041

PROPELLER WEEDLESS WEDGE 2 MKP-32 T/S 55+70 SP

607031

ANODE T/S 55+70SP

607392

SHEER PIN T/S 55+70SP

High-impact composite material

diGital maXimizer.

Left

Up to five times longer run time on a single charge.

*Not compatible with i-Pilot.

RIPTIDE TRANSOM SAltWAter JUSt tHreW In tHe toWel.

MOTORS

RIPTIDE TRANSOM Riptide® steps up to the rigors of saltwater and never backs down. Where lesser motors fold their tents and head home under pressure, Riptide® brings it home day after day. You simply cannot find a trolling motor better suited to give saltwater the ultimate staredown. End of story. QUiCk-lOCk Cam depth adjUSter.

S A L T W A T E R

verSatile SteerinG tenSiOn COntrOl.

The innovative collar above the Riptide® mount allows you to adjust steering tension to your desired level. You can keep it loose for effortless steering or tighten it down to keep Riptide® in place, allowing for true vertical stowing.

T R A N S O M - M O U N T

available thrUSt levelS 55

SpeCifiCatiOnS mOUnt ONE-HAND STOW

COOl, QUiet pOwer YES

RIPtIde tRAnsoM

Change depths simply and securely with Riptide® Transom’s Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

COntrOl HAND CONTROL

Shaft lenGth

SELECTED MODELS

26’, 30”, 36", 42"

prOp

SELECTED MODELS

WEEDLESS WEDGE 2* POWER PROP

COmpOSite Shaft YES

diGital maXimizer YES*

601536, 601538 & 601540 feature Minn Kota’s® exclusive MaximizerTM technology to deliver the precise amount of power needed at any speed, along with variable speed settings. You get the ability to “dial up” the precise speed setting you desire, regulating the amount of power delivered to your motor so it runs cooler with no wasted power. And now, our advanced digital microprocessing optimizes current draw to extend battery life and reduce damaging heat. Get up to five times longer run time on a single charge.

a new twiSt On hand COntrOl. diGital maXimizer.

Up to five times longer run time on a single charge. bla code

description

601530

RIPTIDE® RT40S TRANSOM MNT 26” 12V

601531

RIPTIDE® RT40S TRANSOM MNT 30” 12V

601533

RIPTIDE® RT45S TRANSOM MNT 36" 12V

601534

RIPTIDE® RT50S TRANSOM MNT 42" 12V

601536

RIPTIDE® RT55S TRANSOM MNT 26” 12V

601538

RIPTIDE® RT55S TRANSOM MNT 36" 12V

601540

RIPTIDE® RT55S TRANSOM MNT 42" 12V

Riptide’s® ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage. A convenient digital battery indicator is located right on the motor head.

One-hand StOw.

Riptide® Transom’s remarkably simple, one-hand stow mechanism gets the motor in and out of the water in no time. Just pull up and forward to stow. When it’s time to fish, use the easyaccess thumb release to deploy Riptide® into any one of ten different positions.

accessories 603028

PROPELLER POWER MKP-2 T/S RT40S/45S

603032

PROPELLER WEEDLESS MKP-6 T/S RT40S/45S

603041

PROPELLER WEEDLESS WEDGE 2 T/S RT55/RT50

607031

ANODE T/S ALL RT TRANSOM

607392

SHEER PIN T/S ALL RT TRANSOM

* RT55S models only

MOTORS M O T O R S

enGIne MoUnt

M O U N T E N G I N E S A L T W A T E R

ENGINE MOUNT At tHe reADy. available thrUSt levelS 160 80

SpeCifiCatiOnS

Saltwater enGine mOUnt.

a diSCrete, interferenCe-free mOUnt.

Our Saltwater Engine Mount motors put the corrosion-resistant power of Riptide® on your boat without cluttering the deck.

EM mounts on the cavitation plate of your outboard or I/O lower unit, with no stowing or deploying required. The motor stays out of sight, won’t interfere with your I/O motor, keeps your deck clear, and rides completely out of the water once you’re on plane.

See motor selection chart on page 29.

vOltaGe 12, 24

SpeedS (fwd/rev) VARIABLE

prOp WEEDLESS WEDGE 2

braCket COMPOSITE 602326 rt160 em

Instantly transform your boat into a bona fide fishing machine without adding a motor to your deck. Our Engine Mount (EM) motors can easily be implemented and won’t interfere with your boat or motor. They’re perfect for slow maneuvering or picking your way through tight spots.

remOte Speed COntrOl.

enGine mOUnt GUide.

Control the speed of your EM motor with an 18' corded remote control. It can be mounted or handheld, and offers infinite variable speed control in forward and reverse. Features neutral (off) detent position. The motor can be steered using the boat’s steering wheel or outboard tiller.

• Minimum clearance required from spine of outboard to end of cavitation plate (see diagram). • Cavitation plate to waterline 13” (minimum).

Sealed and prOteCted eleCtrOniCS.

EM electronics are housed in a fully waterproof control module mounted below the deck of the boat. All electronics are sealed in marine-grade polyurethane to provide corrosion-proof protection, and the extruded aluminum housing features specially designed fins that dissipate heat to keep things cool under high rpm use.

= 7-1/4" = 3" (80EM/101EM) 3-3/4" (55EM) = 13"

diGital maXimizer.

By controlling the draw of power at variable speeds, Digital Maximizer eliminates wasted energy, extends battery life and gives you more time on the water.

bla code

minn kOta ® enGine mOUnt mOtOr SeleCtiOn Chart. BOAT LENGTH

14'

16'

18'

20'

22'

55EM – 12V MOTOR SELECTION

80EM – 24V 160EM – 24V

24'

description

602320

MOTOR ENGINE MOUNT RT55EM 12V

602322

MOTOR ENGINE MOUNT RT80EM 24V

602326

MOTOR ENGINE MOUNT RT160EM 24V

accessories 603041

PROPELLER WW2 MKP32 T/S EM55

603042

PROPELLER WW2 MKP33 T/S EM80/160

607031

ANODE T/S EM55

607030

ANODE T/S EM80/160

607392

SHEER PIN T/S EM55

608201

SHEER PIN T/S EM80/160

MOTORS

TRIM TAbS not tHe FIrSt, BUt tHe BeSt. COmpOSite tabS.

tRIM tAbs

Minn Kota’s® Trim Tabs are injection molded for superior durability and corrosion resistance. Their unique contoured shape features a larger surface area and flared edges that channel water down the length of the tab, delivering exceptional lift performance.

ChOOSinG the riGht tabS.

To determine what size tabs will best fit your boat, consult this chart. The larger the tab size, the more lift they create. As a rule of thumb, go with the largest tab size that your transom will accommodate.

stroke length

pin to pin dimension (retracted)

Std Stroke

3.5”

Std Stroke

3.5”

Short Stroke Short Stroke

actuator size

tab chord dimension

Minimum transom height

11.4”

9”

15”

11.4”

12”

2.4”

10.2”

9”

13”

2.4”

10.2”

12”

11”

We’ve always given you the power to go “Anywhere. Anytime.” Now we’re making the ride smoother, faster and more comfortable. Our corrosion-resistant, structural-grade Trim Tabs compensate for rough conditions to get you on plane faster, control list conditions and improve fuel economy. We didn’t invent Trim Tabs, we just perfected them.

COntrOl at the flip Of a SwitCh.

Our sealed, waterproof electronic switches put control at your fingertips. The Basic Rocker Switch provides up/down control of each tab, while the Indicator Switch adds one-touch auto up/down controls and LED lights to display each tab’s position. Install an Auxiliary Switch to control tabs from a flybridge.

Basic Rocker Switch 311030

Indicator Switch 311034

bla code

switch

plane size

actuator length

approximate boat size

311102 311103 311104 311105 311106 311107 311108 311109 311110 311111 311112 311113 311122 311123 311124 311125 311126 311127 311128 311129 311130 311131 311132 311133

Standard Indicator Standard Indicator Standard Indicator Standard Indicator Standard Indicator Standard Indicator Standard Indicator Standard Indicator Standard Indicator Standard Indicator Standard Indicator Standard Indicator

9x9 9x9 9x12 9x12 9x18 9x18 12x9 12x9 12x12 12x12 12x18 12x18 9x9 9x9 9x12 9x12 9x18 9x18 12x9 12x9 12x12 12x12 12x18 12x18

Short Short Short Short Short Short Short Short Short Short Short Short STD STD STD STD STD STD STD STD STD STD STD STD

4.3 - 6.1 4.3 - 6.1 5.2 - 8.5 5.2 - 8.5 7.3 - 10.3 7.3 - 10.3 4.3 - 7.3 4.3 - 7.3 5.5 - 10.3 5.5 - 10.3 8.8 - 14.0 8.8 - 14.0 4.3 - 6.1 4.3 - 6.1 5.2 - 8.5 5.2 - 8.5 7.3 - 10.3 7.3 - 10.3 4.3 - 7.3 4.3 - 7.3 5.5 - 10.3 5.5 - 10.3 8.8 - 14.0 8.8 - 14.0

aCtUatOrS: the drivinG fOrCe.

A custom 12V DC motor powers our intelligently designed actuators, which control tab position with quiet, dependable smooth operation. They also feature the industry’s highest IP68 waterproof rating. item tem # 311020 311024

deSCriptiOn d eSCriptiOn Short-Stroke Actuator Standard-Stroke Actuator

retraCted lenGth 10.25" 11.50"

Actuator 311020

eXtended tended llenGth enG en Gth 12.65" 15.00"

tOtal tO tal StrO Str StrOke Oke 2.40" 3.50"

keep an even keel.

Every boat has both a pitch axis – which spans the width of the boat – and a roll axis – which runs from bow to transom. Trim Tabs keep your boat aligned on both axes to prevent plowing and dipping, saving you fuel and creating a smoother ride.

pitCh aXiS

High Bow Condition

lOwer bOth tabS

rOll aXiS

Correcting Port Side List Condition

lOwer pOrt tab

raiSed StarbOard tab

MOTORS B O W - M O U N T

PoWeRdRIVe V2

F R E S H W A T E R

POwERDRIVE V2 HIgHly evolveD. available thrUSt levelS 55

SpeCifiCatiOnS COntrOl ELECTRIC STEER FOOT PEDAL STANDARD

Shaft lenGth

COmpOSite Shaft diGital maXimizer

48", 54”

YES

prOp

COOl, QUiet pOwer

WEEDLESS WEDGE 2* POWER PROP*

OPTIONAL

YES

It’s been over 75 years since we introduced our first electric trolling motor. To say the technology has evolved since then is an understatement. Take PowerDrive™ V2, with big-time strength and innovative, ergonomic controls that have made it one of the most trusted names on the water. It’s not merely an upgrade. It’s an evolutionary leap. new OptiOnal i-pilOt wireleSS GpS trOllinG SyStem. (602967) i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control and give you command of speed, steering and Advanced AutoPilot. Optimize your PowerDrive™ V2 with i-Pilot (which replaces the foot pedal) for unprecedented navigation and boat positioning. Learn more on page 6-7. * By adding i-Pilot you will no longer have use of the foot pedal on SP and PDV2 motors.

GO remOte with OptiOnal COpilOt tm . (602973)

Enjoy the freedom to control speed and steering from anywhere on the boat with our wireless CoPilotTM remote. The compact, innovative accessory can be attached to a neck lanyard for easy access.

bla code

description

601716

POWERDRIVE™ 45PD V2 BOW MNT 48" 12V

601744

POWERDRIVE™ 55PD V2 BOW MNT 54" 12V

accessories 602954

WIRELESS FOOT PEDAL KIT T/S PD V2

602960

REPLACEMENT CORDED FOOT PEDAL T/S PD V2

602967

I-PILOT KIT T/S POWERDRIVE™ V2

602970

REPLACEMENT I-PILOT TRANSMITTER

602973

WIRELESS COPILOT™ KIT T/S POWERDRIVE™ V2

602977

REPLACEMENT COPILOT™ T/MITTER SP&PD/V2

603009

QUICK RELEASE BKT SP&PD/V2 QRB WHITE

603004

QUICK RELEASE BKT SP&PD/V2 MKA16-02 BLK

603017

QUICK RELEASE BKT WITH COVER

607392

SHEER PIN S/S T/S PD V2

603041

PROPELLER WEEDLESS WEDGE 2 T/S 55 PD

603052

PROPELLER NUT KIT A T/S PD V2

607031

ANODE T/S PD V2

603032

PROPELLER WEEDLESS MKP-6 T/S 45 PD V2

603028

PROPELLER POWER MKP-2 T/S 45 PD V2

Speed control

deplOy-aSSiSt lever.

PowerDrive™ V2’s deploy-assist lever puts you in motion and in pursuit of fish quickly and easily. Depress the lever to deploy the motor and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action whenever you are.

Right Momentary/Constant “ON” switch Momentary button High-impact composite material Left

erGOnOmiCally deSiGned fOOt pedal. (602960)

Control speed, steering, and momentary and constant on/off with PowerDrive™ V2’s foot pedal. It features the industry’s highest IP68 waterproof rating and an 18' cord.

MOTORS B O W - M O U N T

In SolItAry conFIneMent.

available thrUSt levelS 101

FoRtRex

F R E S H W A T E R

fORTREx tHe only Motor We’ve ever Kept 80

SpeCifiCatiOnS COntrOl

COmpOSite Shaft

CABLE STEER

YES

Shaft lenGth 45", 52"

diGital maXimizer YES

prOp

COOl, QUiet pOwer

WEEDLESS WEDGE 2

YES TM

Why’d we leave Fortrex’s solid, extruded aluminum arm exposed? So everyone else on the water knows what they’re up against: the most ruthless motor we’ve ever unleashed. TM With fewer moving parts, tighter tolerances and less give, Fortrex is the beefiest, meanest, quietest motor ever. Consider yourself warned. UniverSal SOnar 2

The transducer and wiring are completely concealed and protected from the elements, while shielded connectors virtually eliminate interference. No rigging required. No messy, exposed wires. Just crystal-clear sonar performance. The view you get is unlike any other, thanks to dual beam technology. It scans the water using both 20˚ and 60˚ angles to give you an expanded view and better bottom detail. Also features advanced temperature sensing.

the mOnO-arm : yOUr SeCret weapOn.

Sometimes, the simplest solution is best. In this case, it’s a revolution. Fortrex’sTM innovative Mono-Arm Design features an extruded, anodized aluminum, structural beam that operates with no metal-to-metal contact and 75% less torsion. A single hinge point and rear pivot bearing with 20% more surface area deliver less wear, longer life and quieter operation than traditional motor mounts.

COUnter-tenSiOn Stabilizer (CtS).

CTS uses an integrated spring that applies force whether the motor’s stowed or deployed. On the water, that translates to a motor with no play, no give, reduced steering torque and silent operation.

lift-aSSiSt eaSeS StOw and deplOy.

Fortrex’s TM patented Lift-Assist design cuts the weight of stow and deploy in half, making it as easy as lifting your SUV tailgate. Features a stainless steel, nitrogen gas-charged spring.

bla code

description

601316

FORTREX™ 80 BOW MNT 45" 24V US2

601318

FORTREX™ 80 BOW MNT 52" 24V US2

601334

FORTREX™ 101 BOW MNT 52” 36V US2

accessories 603042

PROPELLER WEEDLESS WEDGE 2 T/S FORTREX™ 80/101

603062

PROPELLER NUT KIT E MKP-34 T/S FORTREX™ 80/101

607030

ANODE T/S FORTREX™ 80/101

608201

SHEER PIN S/S T/S MAX80/101

602959

US2 CONNECTOR T/S H/BIRD 7 PIN TRANSDUCER

illUminated direCtiOnal indiCatOr.

Fortrex’sTM easy-to-read, illuminated directional indicator leaves no doubt about where you’re headed.

Cable Steer fOOt pedal. Speed control High-impact composite material Momentary button Side-mounted Momentary/ Constant “ON” switch Heel block

remOvable bOwGUard 360°.

Lifting the motor and bowguard off of the mount is now even easier on FortrexTM – just remove a single cap screw. The patented Bowguard 360°™ also features a dual bearing system that eliminates noise and allows for improved breakaways from any angle.

MOTORS

tRAxxIs

T R A N S O M - M O U N T F R E S H W A T E R

TRAxxIS SAy ‘gooDBye’ to tHe StAtUS qUo. available thrUSt levelS 55

SpeCifiCatiOnS mOUnt ONE-HAND STOW

COntrOl

COmpOSite Shaft YES

TILT/ExTEND TILLER

diGital maXimizer

Shaft lenGth

YES*

36", 42"

prOp WEEDLES WEDGE 2* POWER PROP*

COOl, QUiet pOwer YES

When the Bass or Cod are biting, you’d better be on the spot. All the wellpositioned casts in the world don’t mean a thing if you can’t stay on the fish. That’s why every facet of the Traxxis™ was engineered to keep you in the game, no matter where the game takes you. It’s the ultimate in transom-mount trolling performance. QUiCk-lOCk Cam depth adjUSter.

Change depths simply and securely with Traxxis™ Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

verSatile SteerinG tenSiOn COntrOl.

The innovative collar above the Traxxis™ mount allows you to adjust steering tension to your desired level. You can keep it loose for effortless steering or tighten it down to keep Traxxis™ in place, allowing for true vertical stowing.

a new twiSt On hand COntrOl.

Traxxis’ innovative, comfortable Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") for maximum control to fit any style of fishing. It even includes a convenient digital battery indicator located right on the motor head.

bla code

description

601241

TRAXXIS™ 45S TRANSOM MNT 36" 12V

601242

TRAXXIS™ 55S TRANSOM MNT 36” 12V

601244

TRAXXIS™ 55S TRANSOM MNT 42” 12V

accessories 603032

PROPELLER WEEDLESS MKP6 T/S TRAXXIS™ 45

603041

PROPELLER WEEDLESS WEDGE 2 T/S TRAXXIS™ 55

607031

ANODE T/S ALL TRAXXIS™ TRANSOM MOTORS

603052

PROPELLER NUT KIT A 3/8” MKP9

607392

SHEER PIN T/S ALL TRAXXIS™ TRANSOM MOTORS

One-hand StOw.

Traxxis™ remarkably simple, one-hand stow mechanism gets the motor in and out of the water in no time. Just pull up and forward to stow the motor. Then when it’s time to go, use the easy-access thumb release to deploy Traxxis™ into any one of ten different positions.

MOTORS F R E S H W A T E R T R A N S O M - M O U N T

available thrUSt levelS 55

SpeCifiCatiOnS mOUnt LEVER LOCK BRACKET

COntrOl TELESCOPING HANDLE* HAND CONTROL*

endURA

ENDURA yoU cAn’t BeAt A trUe orIgInAl. COmpOSite Shaft YES

COOl, QUiet pOwer YES

Shaft lenGth 26”, 30", 36", 42"

prOp WEEDLESS WEDGE 2* POWER PROP*

While others try to imitate it, we innovate it. Endura™ is the legendary performer that’s built to explore, built to last and backed up with our two-year warranty. It’s the ultimate coming together of form and function, in a package that puts you on the water day after day, year after year – like no other.

lever lOCk braCket.

Our Lever Lock Bracket delivers a rock-solid mount that’s stronger than conventional brackets. Special composite materials resist flexing, warping and UV damage.

indeStrUCtible COmpOSite Shaft.

bla code

description

601008

ENDURA™ 30 TRANSOM MNT 26" 12V

601010

ENDURA™ 30 TRANSOM MNT 30" 12V

601016

ENDURA™ 34 TRANSOM MNT 36” 12V

601026

ENDURA™ 40 TRANSOM MNT 36" 12V

601036

ENDURA™ 50 TRANSOM MNT 36” 12V

601062

ENDURA™ 55 TRANSOM MNT 42" 12V

accessories 603028

PROPELLER POWER MKP-2 T/S CLASSIC 28 ENDURA™ 30+34+40

603032

PROPELLER WEEDLESS MKP-6 T/S CLASSIC 28 ENDURA™ 30+34+40

603036

PROPELLER WEEDLESS MKP-7 T/S ENDURA™ 50+55

603041

PROPELLER WW2 MKP-32 T/S ENDURA™ 50+55

603052

PROPELLER NUT KIT A 3/8" MKP-9 T/S ALL ENDURA™

607392

SHEER PIN S/S T/S ALL ENDURA™

GUaranteed fOr life!

Pound for pound, our composite shaft is stronger than steel. It flexes on impact and will not break, kink or corrode. We’re the only ones who trust our trolling motor shaft enough to guarantee it for life.

teleSCOpinG handle.

Endura™ features an ergonomic, six-inch telescoping handle for the most comfortable, convenient steering available. 19

MOTORS

e-dRIVe

O U T B O A R D E L E C T R I C

There’s no better way to enjoy the lake than with Minn Kota’s® powerful E-Drive Electric Outboard motor. On lakes with petrol motor restrictions, the quiet 2 hp power plant will move a fullsize pontoon boat up to 5 mph with no fumes, no emissions and no messy petrol. Quiet. Clean. Built to run up to 2 hours at 100% on a single charge. Features a special tilt-lock mechanism for safe and secure trailering.

E-DRIVE tHere’S notHIng lIKe A DAy on tHe lAKe.

available eleCtriC OUtbOard hOrSepOwer 2 HP

SpeCifiCatiOnS mOUnt

diGital maXimizer

BOLT-ON TRANSOM CLAMP-ON TRANSOM*

YES

COntrOl

YES

COOl, QUiet pOwer

BOLT-ON = OUTBOARD CABLE LINKAGE CLAMP-ON = TILT TILLER

Shaft lenGth 20"

* Not rated for kicker motor application on gas engine powered fishing boats.

eleCtrOniC thrOttle COntrOl fOr finGertip reSpOnSe.

The ultra-responsive throttle lever has forward/neutral/ reverse positions and push-button tilt up/down. Mounts either on the binnacle or side mount at the cockpit. Features key switch for added safety.

bla code

description

602362

E-DRIVE TRANSOM MNT 20" 48V

602366

E-DRIVE TILLER 20" 48V

minn kOta ® aCtUatOrS.

A custom 12V DC motor powers our intelligently designed actuator on our E-Drive motors. It operates smoothly, quietly and dependably, and also features the industry’s highest IP68 waterproof rating.

realtime diGital battery GaUGe.

E-Drive features a back-lit Realtime Digital Battery Gauge, giving you an instant reading of how many hours of runtime you have remaining at your current speed. Also features a fuel gauge showing battery condition, as well as throttle power level.

e-drive tiller mOtOr.

On gasoline-restricted lakes, the E-Drive Tilt Tiller motor provides primary propulsion with a comfortable, ergonomic Tilt Tiller. Features an easy-to-see, realtime battery gauge on the head and a clamp-on transom bracket that mounts easily to most aluminum V-hull boats.

tilt GaUGe.

Dash-mounted tilt gauge provides an instant readout of motor position. Not available on E-Drive Tiller model.

MOTORS

ENDURA cAnoe trAnSoM MoUnt.

26” Short Shaft Endura™ 30 Freshwater Series Transom Mount. The Endura™ short shaft canoe motor will not disappoint. Whether you are trolling, sneaking up creeks or taking the kids away for a leisurely weekend. Remember Minn Kota®, better than the rest.

available thrUSt levelS 30

COmpOSite Shaft

LEVER LOCK BRACKET

YES

COntrOl

COOl, QUiet pOwer

TELESCOPING HANDLE* HAND CONTROL*

YES

S H A F T

mOUnt

C A N O E

Shaft lenGth 26"

prOp

M O T O R S

WEEDLESS WEDGE 2* POWER PROP*

bla code

description

601008

endURA

S H O R T

SpeCifiCatiOnS

26" ENDURA™ 30 FRESHWATER

accessories 526770 115109

CANOE MOTOR MOUNT POWER BATTERY BOX

available thrUSt levelS 55

SpeCifiCatiOnS

YES*

COntrOl

COOl, QUiet pOwer

Shaft lenGth

YES

28"

prOp

COmpOSite Shaft YES

description

601530

26" RIPTIDE® RT 40 SALTWATER

601536

26" RIPTIDE® RT 55S SALT WATER

M O T O R S

bla code

C A N O E

WEEDLESS WEDGE 2* POWER PROP*

Available only on variable speed models.

S H A F T

HAND CONTROL

RIPtIde

ONE-HAND STOW

S H O R T

diGital maXimizer

mOUnt

All the features of the Riptide® Transom Motors, in a 26” shaft. Includes enhanced corrosion protection, sacrificial anode system and all the rugged reliability you expect from Minn Kota®. Stainless steel hardware used throughout provides an extra measure of durability and corrosion resistance. With low rpm/high torque, coupled with large brushes and commutators, a cooler, quieter more efficient operation is generated, cutting down on fish spooking noise.

MOTORS

RIPTIDE cAnoe trAnSoM MoUnt

accessories 526770

CANOE MOTOR MOUNT

115109

POWER BATTERY BOX

ACCESSORIES

bAtteRY cHARGeRs

114578

bATTERY CHARGERS

114580

mk210a (114584) and mk220a (114586)

mk110pa (114580) and mk105pa (114578)

Chargers are suitable for permanent on-board mounting to eliminate the hassle of traditional portable chargers. Available in two models to suit single or dual battery bank installations and provide fully automatic, multi-style charging to properly maintain the batteries. By controlling the current and voltage during the charging cycle, Minn Kota® chargers recharge faster than conventional automotive battery chargers while preventing over charging which can damage and shorten battery life. They include an automatic temperature compensation feature that adjusts the output voltage to assure the battery reaches its gassing threshold and achieves a full charge. The temperature compensation feature also protects the batteries from “boiling” due to over charging at high temperatures.

Portable marine battery chargers are designed to deliver a precise, proper charge to marine batteries without over or under charging as is often the case with standard automotive battery chargers. They utilize a multi-stage charging system – a feature not found on most portable chargers, to charge up to 50% faster than a single stage (bulk) portable charger, while properly protecting the batteries. Over charging can damage the useful life of the battery. Likewise under charging over time, will reduce the discharge time and shorten the battery life as much as 20%.

• Fully AutoMAtiC ChArging MK210A & MK220A – 3 stage (bulk, absorption, maintenance • 10 AMps totAl output (114584) • 20 AMps toAtlA output (114586) • lED DisplAy Indicates power on, charging, full charge and check connection. • WAtErprooF, shoCk AnD VibrAtion RESISTANT Heavy duty construction, waterproof to IPx7 • SHORT CIRCUIT, REVERSE POLARITY & IGNITION PROTECTED A safety feature which prevents the charger from operating if incorrectly connected to the battery • sAltWAtEr tEstED • For usE With 12VDC/6 CEll bAttEriEs Suitable for 50-130 amp hour rated, flooded wet cell, maintenance free or AGM batteries

114584

• Fully AutoMAtiC 3 stAgE ChArging* Bulk, absorption and maintenance cycles • 10 AMps totAl output (114580) 114586

• 5 AMps totAl output (114578) • lED DisplAy Indicates power on, charging, full charge and check faulty connection • short CirCuit AnD rEVErsE polArity protECtion A safety feature which prevents the charger from operating if improperly connected to the battery

bla code

description

114578

BATTERY CHARGER MK105PA PORTABLE 12V 5A

114580

BATTERY CHARGER MK110PA PORTABLE 12V 10A

114584

BATTERY CHARGER MK210A 2 OUTPUT 12V 10A

114586

BATTERY CHARGER MK220A 2 OUTPUT 12V 20A

• For usE With 12VDC/6 CEll bAttEriEs Suitable for 50-130 amp hour rated, flooded wet cell, maintenance free or starved electrolyte (AGM) batteries only. * MK105PA has 2 stage charging (bulk and maintenance) 114578

aUtOmatiC temperatUre COmpenSatiOn The “gassing threshold” – where lead acid batteries reach their peak charge level – changes with temperature. The higher the temperature, the lower the threshold. Minn Kota® On-Board Chargers compensate for temperature by adjusting the output voltage to assure you always receive the proper charge. It also protects batteries from “boiling” due to overcharging at high temperatures. You get a better charge, with better protection.

mUlti-StaGe CharGinG 22

Minn Kota® battery chargers

Multi-stage charging allows for faster, more exact charges with no overcharging. It automatically controls current and voltage to deliver the correct charge throughout the bulk, absorption and maintenance stages.

ACCESSORIES

new i-pilOt

The accessory for total boat control. i-Pilot uses GPS technology to store and retrieve locations and paths on the water, control speed and steering of your trolling motor, set cruise control for better bait presentation, and stay directly on a heading. Controlled by a compact, intuitive, fully protected remote. Neck lanyard and belt carabiner included for easy access. See all of i-Pilot’s functions on pages 6-7.

AccessoRIes

Available on PowerDrive™ V2, Riptide ® ST and Riptide ® SP bow-mount trolling motors.* By adding i-Pilot to PDV2 and Riptide ® SP motors you will no longer have use of the foot pedal.

bla code 602967

description IPILOT TO SUIT POWERDRIVETM V2

602968

IPILOT TO SUIT RIPTIDE® ST

602969

IPILOT TO SUIT RIPTIDE® SP V2

602970

REPLACEMENT I-PILOT TRANSMITTER

* Will not suit pre June 07 motors with oval plug.

wireleSS COpilOt tm Control speed, steering and on/off from anywhere on the boat with the CoPilotTM wireless remote. The handheld, waterproof remote is conveniently attached to a neck lanyard for easy access and also floats.

twO additiOnal bUttOnS, endleSS OptiOnS. On Riptide® ST, CoPilotTM adds two extra features: reach maximum speed in an instant with the high speed bypass button, and get one-touch AutoPilot activation.

High Speed Bypass (Riptide® ST only) AutoPilot On/Off (Riptide® ST only) Steer Left Propeller On/Off Decrease Speed Increase Speed Steer Right

Actual Size

bla code

description

602982

WIRELESS COPILOT KIT T/S RIPTIDE® SP MOTORS

602973

WIRELESS COPILOT KIT T/S POWERDRIVE™ V2 MOTORS

602974

WIRELESS COPILOT KIT T/S RIPTIDE® OLD STYLE (PRE JUNE 07 MOTORS)

602972

WIRELESS COPILOT KIT T/S POWERDRIVE™ OLD STYLE (PRE JUNE 07 MOTORS)

Each CoPilotTM system includes: receiver, key-fob remote and neck lanyard. Available on the following motors: • Wireless CoPilot for terrova • Wireless CoPilot for powerdrive , riptide® with autopilot and powerdrive v2 tM tM

wireleSS aCCeSSOrieS (nOt ShOwn): Wireless Foot Pedal (PowerDriveTM or PowerDriveTM V2 CoPilotsTM ), Replacement CoPilotTM Remotes

ACCESSORIES

riptide ® & pOwerdrive tm bOw mOUnt QUiCk releaSe braCket mOdel mk a-16-02 Aluminium bracket designed for quick and easy removal/installation of Riptide® and PowerDrive™ bow mount trolling motors.

bla code 603004

description QUICK RELEASE BKT SP&PD/V2 MKA16-02 BLK

riptide ®, pOwerdrive tm & riptide ® terrOvatm QUiCk releaSe braCket mOdel rta 17 Allows for easy removal of any Riptide® bow mount, Autopilot motor. The low profile puck design leaves the deck clear when the motor is removed. Includes stainless steel hardware and locking pin. Locking handle can be secured with padlock (not included).

bla code 603009

description QUICK RELEASE BKT SP&PD/V2 RTA-17 WHITE

QUiCk braCket with COver t/SeleCtriC Steer mOtOrS

bla Designed for fast removal of any Terrova™, PowerDrive™ V2 or PowerDrive™ bow mount trolling motor. New cam-lock design code features ultra tight tolerances that eliminate bracket movement 603017 and noise. Locking lever includes pin and lanyard. Upper and lower plates include slot for securing with padlock (not included). Includes composite cover that attaches to lower half of bracket when motor is removed, keeping the deck profile clean.

description QUICK RELEASE BKT T/S ELECT STEER MTRS

maXXUm bOw mOUnt QUiCk releaSe braCket

MoDel MK-42

Suits 1070mm (42”) shaft length.

bla code

Suits 1320/1575mm (52”/62”) shaft length.

603006

Convenient, quick removal of any Maxxum™ bow mount and Riptide® hand control bow mount trolling motors. Features locking quick release design for smooth and easy disconnect.

QUICK RELEASE BRKT MK-42T/S MAX 42”

603008

QUICK RELEASE MK-52/62 T/S MAX 52”& 62”

MoDel MK-52/62

maXXUm bOw mOUnt QUiCk releaSe braCket mOdel mk a-23 Allows for easy removal of any Maxxum™ bow mount. The low profile puck design leaves the deck clear when the motor is removed. Includes stainless steel hardware and locking pin. Locking handle can be secured with padlock (not included).

bla code 603015

description

description QUICK RELEASE BKT COMPOSITE T/S MAXXUM

battery meter mOdel mk-b/m-1d Measures remaining charge on a 0, 1/3, 2/3, full scale via LED indicators in any 12 volt battery. LCD voltage can be easily read in sunlight. Takes the guesswork out of estimating a charge. Compact and durable, fits into your pocket or tackle box.

tranSdUCer mOUntinG kit mOdel mkr-15 Allows sounder transducer mounting on lower unit of bow or transom mount motors. Rugged, durable construction. Fits most major manufacturer’s transom mount transducers.

bla code 114023

bla code 603020

description BATTERY METER DIGITAL 12V MKBM-1D

description TRANSDUCER MOUNT KIT MKR-15

CanOe mOtOr mOUnt Fully adjustable motor mount that will suit most canoes with bla a gunwale of more than 25mm. Cast aluminium and timber construction. Accepts up to a 4HP two stroke motor or 55lb thrust code 526770 Minn Kota® electric motor.

description CANOE MOTOR MOUNT

SaCrifiCial anOde replaCement Balanced design anode attaches quickly and easily to the prop hub. bla Eliminates corrosion of other metallic components on RipTide® code trolling motors. 607301 fits 3.25” (80mm) and 3.65” (90mm) lower 607030 units; 607030 fits 4” (100mm) and E-Drive lower units. 607031

description

suits

ANODE T/S 4” DIAMETER

80LB + 101LB MOTORS

ANODE T/S 3.65” DIAMETER

28-70LB MOTORS

Wireless control featuring plug n play design for easy hook up. Hand held remote controls left/right steering, speed up/down, and motor on/off from your fishing rod, wrist or belt. System can be used in conjunction with your corded foot pedal.

wireleSS COpilOt tm kit t/S OldStyle rtap pre jUne 07 mOtOrS Wireless control featuring plug-n-play design for easy hook up. Hand held remote controls left/right steering, speed up/down and motor on/off from your fishing rod, wrist or belt. System can be used in conjunction with your corded foot pedal. Suits old style motors with push together plugs.

COpilOt tm wireleSS t/S pd/v2

description

602982

WIRELESS COPILOT KIT T/S RTSP

602977

REPLACEMENT COPILOT T/MITTER SP&PD/V2

ACCESSORIES

bla code

COpilOt tm wireleSS kit t/S rtSp mOtOrS

bla code

description

602974

WIRELESS COPILOT KIT T/S OLD STYLE RIPTIDE®

602977

REPLACEMENT COPILOT TRANSMITTER

bla

description

Wireless control featuring plug-n-play design for easy hook up. code Hand held remote controls left/right steering, speed up/down, and 602973 motor on/off from your fishing rod, wrist or belt. System can be 602977 used in conjunction with your corded foot pedal.

WIRELESS COPILOT KIT T/S POWERDRIVE V2 TM

REPLACEMENT COPILOT T/MITTER SP&PD/V2 TM

wireleSS COpilOt tm kit t/S pOwerdrive tm pre jUne 07 mOtOrS Wireless control featuring plug-n-play design for easy hook up. Hand held remote controls left/right steering, speed up/down and motor on/off from your fishing rod, wrist or belt. System can be used in conjunction with your corded foot pedal. Suits old style motors with push together plugs.

bla code

description

602972

WIRELESS COPILOT KIT T/S OLD STYLE POWEDRIVE

602977

REPLACEMENT COPILOT TRANSMITTER

wireleSS COpilOt tm tranSmitter t/S terrOvatm + pOwerdrive tm Spv2

bla CoPilot™ for Terrova™ includes two additional functions not found on CoPilot™ for PowerDrive™ or PowerDrive™ V2. The code high speed bypass feature automatically increases motor speed 602979 to 100% and Auto Pilot button which allows activation from anywhere in the boat

replaCement COrded fOOt pedal To suit all PowerDrive™ & Riptide® AutoPilot™ Motors 12 & 24 volt, 1991 onwards and pre June 2007.

description REPLACEMENT COPILOT TRANSMITTER TERROVA

bla code 602950

description FOOT PEDAL CORDED T/S PD & RTAP 1991-07

COrded fOOt pedal t/S riptide ® Sp & pd/v2 To suit all RTSP and PD/V2, 12v and 24v motors after June 2007. Supplied with IP68 waterproof connector. Not suitable for old style Riptide® or PowerDrive™ Bow Mounts

bla code 602960

description FOOT PEDAL CORDED T/S RIPTIDE® SP

COrded fOOt pedal t/S riptide ® terrOvatm Optional foot pedal for use with Riptide® ST bow mount trolling motors. Low profile design offers two speed steering options: bla heel/toe pedal or left/right steering buttons. Includes rotary speed code control dial, momentary/constant on toggle, auto pilot on/off 602964 toggle and (5.5m) cable with IP68 rated waterproof connector plug. Works in conjunction with the standard CoPilot™.

wireleSS fOOt pedal kit t/S pOwerdrive tm v2 Wireless foot pedal kit to suit all PowerDrive™ V2 bow mount motors. Pedal functions include left/ right steering, speed up and down and motor on/off. Receiver includes plug to allow corded foot pedal to be used in conjuntion with the wireless pedal.

bla code

description FOOT PEDAL CORDED T/S RIPTIDE® TERROVA TM

description

602954

WIRELESS FOOT PEDAL KIT T/S PD V2

602956

REPLACEMENT W/LESS F/PEDAL T/S SP&PD/V2

ACCESSORIES

bUSSmann ® heavy dUty CirCUit breakerS Single pole thermal type switchable reset circuit breakers. Typically used in auxiliary and accessory circuits. Sealed for engine compartment and bilge area applications. Visual indicator of tripped condition.

bla code

description

114049

50 amp SURFACE MOUNT

114050

50 amp PANEL MOUNT

panel mount

SpeCifiCatiOn :

• 30VDC, 3000 amp interrupt capacity • -32ºC to 82ºC operating temperature • Complies with sAEJ1625

Surface mount

QUiCk COnneCt harneSS mOdel mkr-12 For wiring where a plug and socket cannot be used. Heavy duty 10 gauge connectors.

bla code 115626

trOllinG mOtOr plUG and SOCket mOdel mkr-18 Universal design for wire configurations on 12-24 volt systems. Watertight sealing cap and corrosion resistant electrical components. Requires 28.5mm diameter mounting hole. 6 gauge wire connection.

bla code 114276

description QUICK CONNECT HARNESS MKR-12

description PLUG & SOCKET KIT 40 AMP MKR-18

anderSOn plUGS Heavy duty, DC rated two circuit connectors. Feature a self cleaning bla contact design that resists arcing. Grey plastic housing with silver code plated solid copper contacts, spring loaded to resist vibration 115612 arcing. Ideal for high load applications such as trailer winches, trolling motors and battery connections. Sold singly, two 115614 required to make a connection.

description MAX. 50 AMPS. MAX. CABLE MM2 8. BASE MM 48x35. HEIGHT MM 16. MAX. 175 AMPS. MAX. CABLE MM2 32. BASE MM 80x55. HEIGHT MM 25.

bOw mOUnt StabiliSer kit mOdel mk a-4 Reduces bounce on Maxxum™ and Fortrex™ bow mount motors. bla Attaches to the top side of the upper arm of the scissors mount. code When motor is stowed, the stabiliser is positioned vertically 603012 between the upper arm of the bracket and the deck of the boat. Rubber bumper protects deck finish.

description BOW MNT STABILIZER KIT MKA4

eXtenSiOn handleS Provide extended tiller length steering and speed control for Minn Kota®, transom mount motors and small petrol outboards. Available in a choice of two fixed length extensions or a telescopic, adjustable length model. Simple installation, just slide over existing hand grip and tighten down. Removable rubber sleeve allows installation on tillers from 36 to 45mm diameter.

pOwer battery bOX

bla code

EXTENSION HANDLE OUTBOARD 460MM

603024

EXTENSION HANDLE OUTBOARD 760MM

603026

EXTENSION HANDLE OUTBOARD TELESCOPIC 620MM-1000MM

bla

Impact resistant case with a heavy duty handle and strap that code makes the battery portable. Indicator measures battery condition 115109 at the press of a button. Two cigarette lighter type power sockets are mounted externally and prewired internally via a 10 amp circuit breaker that can be externally reset. Heavy duty external terminals with insulated wing nuts are pre wired internally to the battery, via a 60 amp circuit breaker that can be externally reset.

description

603022

description POWER BATTERY BOX

ACCESSORIES

beP VoLtAGe sensItIVe ReLAY: tWIn bAtteRY cHARGInG MAde eAsY!

A dual sensing VSR is also available. This model allows the unit to sense the voltage of both batteries that it is connected between. If either battery is receiving a charge, the VSR will activate, paralleling the two battery banks. It is designed for applications where a battery charger or second charging source is connected into the house battery. bla COde 113646

SpeCifiCatiOnS:

• Continuous current: 125 amps DC/12V • intermittent current: 105 amps DC/12V • height: 50mm • base size: 69x69mm

bla code

description

volts

type

bAtteRY MAnAGeMent

The Voltage Sensitive Relay (VSR) allows two batteries to be charged at the same time. It will automatically prioritise the charging of the start battery in twin battery systems. When the engine is first started the relay is open and remains open until the start battery has reached a preset 13.7 volts for 12 volt systems and 27.4 volts for 24 volt systems. At the rated voltage the relay closes providing charge to both batteries (start and house). When the voltage drops below 12.8 volts (when the engine is stopped), the VSR disengages, separating the batteries. This system eliminates the possibility of draining the start battery and protects electronics powered by the house battery from harmful engine starting spikes. A VSR has no voltage drop as opposed to conventional charge diode isolators. Surface mounted, 5mm roundhead screws.

Max current amps

113646

BEP CONTOUR VSR 12V 125 AMP

SINGLE

125

113647

BEP CONTOUR VSR 24V 100 AMP

DUAL

100

113649

BEP CONTOUR VSR 12V 125 AMP DUAL SENSING

DUAL

125

ACCESSORIES

WeedLess WedGe 2 MKP-32 603041 prOp nUt kit “a” reQUired 603052

M O T O R S C A N O E

The latest generation of this legendary Roland Martin design features swept back and flared blades to “wedge” weeds away. Pass through the thick stuff at any speed without battery draining “chopping and hacking.” A Minn Kota® exclusive!

bla code 602941

MKP-32

603042

MKP-33

N.B. To be used with Minn Kota® motors with the initials “MK” preceding the serial number.

WeedLess WedGe 2 MKP-33 603042 prOp nUt kit “e” reQUired 603062

description

MOTOR DIA.: 101.5mm (4”) MAx 80, MAx 80/US, MAx 80/H/3x, MAx 101, MAx 101/US, MAx 101/H, MAx 101/H/3x, MAx PRO 80, MAx PRO 80/US, MAx PRO 101, MAx PRO 101/US, MAx 80T, MAx 80/H, 80PD, 80PD/AP, 80PD/US, 80PD/AP/US, VECTOR 80/3x, VECTOR 101/3x, VANTAGE 80, VANTAGE 101, RT PRO 80, RT PRO 101, RT80/B, RT80/B/L&D, RT80/B/3x, RT80/B/L&D/3x, RT80/S, RT80/S/3x, RT101/B, RT101/B/3x, RT101/S, RT101/S/3x, RT80/ AP, MK80EM, MK101EM, MK160EM, MK202EM, RT80EM, RT101EM, RT160EM, RT202EM, RT80SAP, RT80ST, FORTREx 80, FORTREx 101, RT80ST I-PILOT. N.B. To be used with Minn Kota® motors with the initials “MK” preceding the serial number.

S H A F T S H O R T

PRo RePLAceMent seLectIon cHARt

WeedLess WedGe 2

MOTOR DIA.: 92mm (3 5/8”) 55AT, 55AT/H, 70AT, MAx 55/SC, MAx 55, MAx 55/SC/H, MAx 55/SC/H/3x, MAx 70, MAx 70/H/3x, MAx 70/SC, MAx 70/SC/H, MAx 70/US, MAx 55T, MAx 70T, 50PD, 55PD/AP, 55PD/AP/US, 55PD/US, 65PD, 54PD PONTOON, 68PD PONTOON, 70PD, 70PD/AP, 70PD/US, 70PD/AP/US, VECTOR 46, VECTOR 55, VECTOR 55/3x, VECTOR 70, VECTOR 70/3x, EDGE 45, EDGE 55, EDGE 55/H, EDGE 70, ENDURA 46, ENDURA 50, ENDURA 55, ENDURA PRO 46, ENDURA PRO 55, CAMO 55xL, RT55/B/H, RT55/B/SC/L&D, RT55/B/L&D/3x, RT55/B/3x, RT65/B/SC, RT65/B/SC/L&D/3x, RT70/B/H, RT70/SC, RT55/AP, RT70/AP, RT50/S, RT55/S, MK55EM, RT55EM, RT55SP, RT55SPAP, RT70SP, RT70SPAP, RT55SAP, RT55ST, TRAxxIS 55, RT55ST I-PILOT, PD55V2.

WeedLess WedGe MKP-6 603032 prOp nUt kit “a” reQUired 603052

WeedLess WedGe

100% weedless. Unique, patented design pushes weeds away to conserve battery power. Easily moves through heavy vegetation, even at slow speeds.

bla code

description

603032

MKP-6

603036

MKP-7

603040

MKP-8

MOTOR DIA.: 82.5mm (3 1⁄4”) 35A, 35TA, 40TA, 65TA, 35T, 50T, 50MxT, 65T, 555T, 555TA, 565T, 565TA, 30AT, MOTOR DIA.: 3-1/4” 33AT, 36AT, 36AT/H, 365T, 365TA, 365TMB, 765T, 765MxT, 765MxTA, 865T, 865MxTA, 665T, 665MxT, 30Ex, 36Ex, RT27/S, RT36/S, RT40/S, RT40/SC, 36PD/C, 36PD/AP/C, 40PD, 40AP, EDGE 40, EDGE 40/H, ENDURA 30, ENDURA 34, ENDURA 36, ENDURA 38, ENDURA 40, ENDURA PRO 32, ENDURA PRO 38, 40AT, 40AT/H, MAx 30T, MAx 36T, MAx 40T, POWERMAx 30, POWERMAx 36, VECTOR 40, RT45, PD45, TRAxxIS 45.

WeedLess WedGe MKP-7 603036 prOp nUt kit “a” reQUired 603052

MOTOR DIA.: 92mm (3-5/8”) 90T, 112, 1125/S, 312, 324, 412, 512, 524, 712, 712/S, 724, 724/S, 812, 824, 42Ex, 42AT, 42AT/H, 48AT, 50AT, 55AT, 55AT/H, 65AT, MAx 44, MAx 44/H, MAx 50/SC, MAx 54, MAx 54/H, MAx 55, MAx 55/H, MAx 55/SC, MAx 55/SC/H/3x, MAx 65/SC, MAx 65, MAx 65/US, MAx 65/H, MAx 65/H/3x, MAx 44T, MAx 44BT, MAx 50T, MAx 50BT, MAx 55T, MAx 55BT*, MAx 65T, MAx 65BT, 42PD/C, 42PD/AP/C, 48PD/AP/C, 65PD, 50PD, 55PD, 55PD/AP, 55PD/US, 55AP, 55AP/US, 65AP, 65PD/AP, 65PD/US, 65AP/US, 54PD PONTOON, 64PD PONTOON, GENESIS 55, GENESIS 55/AP, GENESIS 55/AP/US, RT42/AP/C, RT48/AP/C, RT48/AP, RT50/SC, RT55/B/H*, RT55/B/SC/L&D, RT55/B/L&D/3x, RT55/B/BG/3x, RT55/SC/H, RT55/AP, RT65/B, RT65/B/SC/L&D/3x, RT65/AP, RT42/S, RT50/S, RT50/S/SC, RT55/S*, RT65/S, ENDURA 42, ENDURA 44, ENDURA 46, ENDURA 50, ENDURA 55, ENDURA PRO 46, CAMO 44, SPIDER 48, POWERMAx 47, POWERMAx 52, VANTAGE 50, VANTAGE 55, VECTOR 46, VECTOR 55, VECTOR 55/3x, VECTOR 65, VECTOR 65/3x Neptune Primary Propulsion Motors: EP42, EP48, EP65, EP96, EP130*Refer to original prop on motor.

PoWeR PRoP

N.B. To be used with Minn Kota® motors with the initials “MK” preceding the serial number.

Extra cupping delivers power when needed to get you through the tough stuff.

bla code 603028

description

WeedLess WedGe MKP-8 603040

MKP-2

prOp nUt kit ”b” reQUired 603056

PRoP nUt KIt PR

Easy-to-use kit that allows for fast removal/replacement of prop. Available in different sizes to fit Minn Kota® prop shaft diameters (3/8”, 1/2” and 5/16”). Requires crescent wrench for installation

bla code

description

603052

MKP-9 - PROP NUT KIT A

603056

MKP-10 - PROP NUT KIT B

603060

MKP-23 - PROP NUT KIT D

603062

MKP-34 - PROP NUT KIT E

MOTOR DIA.: 101.5mm (4”) 595W, 595M, 599W, 599M, 795M, 795Mx, 799M, 799Mx, 3HPS/ SBM, RT3.1/B, RT4.3/B, 3.1HP/B, 4.3HP/B, 95W, 95M, 99W, 99M, 3HP, 3HPS/STM, 395W, 395M, 399W, 399M, RT70/S, RT74/AP, RT74/S, RT74/S/3x, RT74/B/BG/3x, RT74/B/L&D/3x, 55Ex, 70Ex, RT70/B, RT74/B/H/BG, RT74/B/H/L&D, 74PD, 74PD/AP, 74PD/AP/US, 4HP, RT3.1/S, RT4.3/S, 3.1HP/S, 4.3HP/S, 64AP, MAx 74, MAx 74/US, MAx 74/H, MAx 74/H/3x, MAx 74T, MAx 74BT, 64PD, 62PD/AP, VANTAGE 74, GENESIS 74/AP, GENESIS 74, GENESIS 74/ AP/US, VECTOR 74/3x MagSeries: 36W, 36M, 40W, 40M, 736Mx, 740Mx, 36MTM, 36WRM, 36MRM,40WRM, 40MRM, 40 RW N.B. To be used with Minn Kota® with the initials “MK” preceding the serial number.

PoWeR PRoP MKP-2 603028 PROP NUT KIT “A” REqUIRED 603052 MOTOR DIA.: 82.5mm (3-1/4”) 35A, 35TA, 40TA, 50T, 65N, 65MxN, 35T, 50MxT, 65T, 765T, 765MxNA, “ 765MxT, 865, 865T, 865MxT, 365T, 665T, 665MxNA, 665MxT, 555T, 565N, 565T, CLASSIC 28, ENDURA 30, ENDURA 36, ENDURA 38, ENDURA 40, RT40/S, ENDURA PRO 32, ENDURA PRO 38, POWERMAx 30, POWERMAx 36 MagSeries: 24, 30, 36, 40 Ltd. Series: 24, 36, 536, PD40V, PD45, ENDURA 45, ENDURA 34, TRAxxIS 40, TRAxxIS 45, RT45.

sHAFt LenGtH seLectIon GUIde MAx tHRUst lb kg

VoLts

5/3

sPeeds (FWd/ReV)

1070

915

760

659

Yes

–

Yes

–

7.6

6.4

5.5

6.4

6.1

5.2

4.3

MAx boAt LenGtH

MAx AMP dRAW

Measure down from the mounting surface of the transom or bow to the water level. Use these measurements and the tables to find the appropriate shaft length.

13.4 12 5/3

915

Yes

7.6

601536

601534

601533

601531

601530

601499

601497

601490

601484

601450

601334

601318

601316

601244

601242

601241

601062

601036

601026

601010

601008

bLA code

55PD V2

45PD V2

RT55/S

RT55/5

RT50/S

RT45/S

RT40/S

RT80 ST/i-PILOT

RT55 ST/i-PILOT

RT70 SP/AP/FP

RT55 SP/AP/FP

RT55 SP/FP

Fortrex 101

Fortrex 80

Traxxis 55

Traxxis 45

Endura 55

Endura 50

Endura 40

Endura 34

Endura 30

Cavitation Plate

PowerDrive

One Hand Stow

PowerDrive

Liftassist Bowguard 360 Liftassist Bowguard 360 Liftassist Bowguard

One Hand Stow

Lever Lock Bracket

Console

MicroTouch Cable

Extension/Tilt Twist Tiller

i-Pilot

Micro Touch Cable/AutoPilot

MicroTouch Cable/Autopilot

MicroTouch Cable

Wide Track Cable Foot

Extension Twist Tiller

160

101

–

75.5

36.3

24.9

24.6

20.1

24.6

22.3

20.1

17.9

35.7

24.6

31.3

24.6

45.1

35.7

24.6

30.1

Variable

5/3

Variable

508 Stainless Steel

1370

1220

1070

915

659

1070

915

760

659

1370

1220

1320

Yes

–

Yes

–

Yes

7.6

7.3

6.0

5.5

6.4

4.9

6.4

6.1

5.5

5.2

7.6

116

Riptide 602320 saltwater 602322 engine Mount

Riptide saltwater transom

Riptide saltwater bow

Fortrex bow

traxxis transom

endura 601016 transom

601538

RT55EM

Cavitation Plate

2HP

–

TROLLING MOTOR SPEC SHEET

13.4 12 42

915

–

7.6

bAtteRY MeteR

contRoL

30 15.2 12

1070

–

6.4

601540

RT80EM

Binnacle/Throttle

2Hp

MAxIMIseR

MoUnt

Twist Tiller 30 17.9 5/3

Yes

–

6.4

recommended Shaft length

Powerdrive 601716 601744 bow

RT160EM

Bolt-on Transom

Tiller

coMPosIte sHAFt

ModeL

Lever Lock Bracket 34 22.3

Variable

Yes

7.0

bow to waterline

602326

E–Drive

Clamp-on Transom

sHAFt LenGtH In MM

Endura 30 Extension Twist Tiller 40 12

Variable

1142

Yes

36” (915mm) 42” (1070mm) 48-52” (1220-1320mm) 54-60” (1370-1525mm)

602362

E–Drive

transom to waterline

30” (760mm) 36” (915mm) 42” (1070mm) Consult Sales Dept.

recommended Shaft length

* Add 125mm to waterline measurement for fishing in rough water. Add 300mm to waterline for steering a hand control while standing.

Cavitation plate to waterline 330mm (minimum)

Engine Mounted guide

bow Mount guide

0 to 250mm 250 to 400mm 400 to 560mm Over 560mm

transom Mount guide

Lever Lock Bracket Extension Twist Tiller 50 24.6 12

Variable

1320

Yes

6.4

0 to 400mm 400 to 560mm 560 to 710mm 710 to 865mm

602366

e-drive transom

MINN KOTA

endoRseMent & sUccess 30

sHAUn cLAncY The Terrova™ 80 i-Pilot was the key to my 2010 Tasmanian Angler of the year title. i-Pilot is the biggest technical advancement of electric motors ever!

WAYne FRIebe The Fortrex™ is the smoothest, quietest and most advanced cable steer motor on the market. The US2 transducer gives consistent readings through my Humminbird® sounder.

bUsHY I never thought I would see an electric motor that steers itself and can hold you on a spot. I can not do without my Terrova™ i-Pilot.

cARL jocUMsen Without a doubt my Minn Kota® motor has contributed more to my tournament success then anything else. Fishing without a Minn Kota® is not an option.

tIM MoRGAn The new Minn Kota® i-Pilot has revolutionised the way I fish and has allowed me to spend less time steering and more time fishing. Another reason why Minn Kota® is the number 1 electric motor in Australia.

cHRIs WRIGHt Minn Kota® motors are the only electric motors that can handle my abuse. From racks to rocks they are the only choice in electric motors.

RodeRIcK WALMsLeY Minn Kota® electric motors have never let me down even in the toughest of conditions. Across the entire range they are the brand that you can rely on anywhere, anytime.

AndReW “et” ettInGsHAUsen When filming Escape with ET I can’t afford to have products let me down. With Minn Kota® I have the reliability and confidence I need. Minn Kota® are without a doubt the best electric motors on the market.

MINN KOTA

abt brEaM Wins 2010

MInn KotA eVent sUccess

• gippsland • st helens • Mallacoota • hawkesbury • tweed river • bribie island • Victorian Angler of the year 2010 • tasmanian Angler of the year 2010 • new south Wales Angler of the year 2010 abt bass Wins 2010

• somerset Dam • boondooma Dam

Minn Kota Wins 2010

Lake Glenbawn, NSW

MEGABUCKS 2010

Minn Kota Wins 2010 Minn Kota Wins 2010 31

WIRELESS gPS TRoLLIng SySTEm

THE NAVIGATION REVOLUTION

your nearest stockist

www.minnkota.com.au

06_10_MinnK Bro 2010

Disclaimer: Every reasonable effort has been made to ensure the accuracy of the information in this brochure at the time of printing. We cannot accept responsibility for errors or omissions. Features and specifications subject to change without notice.

09/2010 Distributed exclusively by BLA Pty Ltd

www.bla.com.au www.bla.co.nz

P.O. Box 7171, Hemmant, Queensland, Australia 4174 Phone: 1300 252 725 Fax: 1300 252 329

Unit 2, 76 Porana Road, Glenfield, Auckland NZ 0627 Email: sales@bla.co.nz Phone: (09) 442 1717 Fax: (09) 442 1718