CT-3040 User Manuals V.13.07
Thanks for choosing our jammer with CT-3040 big power for cell phone’s signal. The jammer is one kind of high power jammer of CT-3040 series; the power is 55-80 WATT. In order to ensure that you can be familiar with the operation of this machine as soon as possible, this end-user’s manual could be provided in details.
1. Technical Specification CT-3040 (3 bands)
CT-3040 (4 bands)
CT-3040WiFi (4 bands)
CT-3040GPS (4 bands)
850-965MHz 25W
850-895MHz 25W
850-895MHz 25W
850-895MHz 25W
(920-965MHz: 25W)
(920-965MHz: 25W)
1920-1990MHz 15W
1920-1990MHz 15W
(1800-1880MHz:15W)
(1800-1880MHz:15W)
2100-2170MHz 15W
2100-2170MHz 15W
2400-2500MHz: 8W
GPS L1 1575MH: 8W
1800-2000MHz 15W 2100-2170MHz 15W
920-960MHz: 25W 1800-2000MHz 15 W
N/A
2100-2170MHz 15 W
Total : 55W
Total : 80 W
(1520-1670MHz: 8W) Total : 63 W
Total : 63 W
Option: GPS L2 L3 L4 L5: 8W, VHF 130-180MHz: 20W, UHF 420-480MHz: 20W, 4G 2620-2690MHz: 5W, LoJack 173MHz: 20W Adjustable Output Power each Band/Channel, Max Output Power to 0 (OFF) VSWR over protection for each modular
Power supply:
AC110 or 220-240V /DC 27V
Jamming Range
Radius 50~150 meters (-75dBm@Omnidirectional antennas)
Weight
10Kg
Dimension:
CT-3040 350 x 190 x 60mm / CT-3060 400 x 190 x 60mm
Working time:
Without the time limit, May continue to work,
Antenna
External Omni 350mm or 500mm long or Directional Patch Panel Antennas
Warranty:
1 year
2. Installation Steps For Omni Antennas Once you open the package, please try to install the Three or Four antennas to the jammer by colors. Make GSM to GSM (850-965MHz), DCS to DCS (1805-1990MHz), 3G to 3G (2100-2170MHz) and WiFi to WiFi (2400-2500MHz) Try to screw the antennas tightly.
For Directional Patch Panel Antennas
Directional Antennas can cover 800-965MGz 7dBi and 1700-2500MHz 9 dBi that can use any band of all Cell Phone Band, WiFi.
3 Start the machine 1) Connect the jammer to the power supply. (****Note: please make sure you switch power supply to your voltage 110 or 220V*******)
Make Sure‌‌* Your Voltage is for your Country 110 or 220V
2) Switch on the machine and Power LED light will be green-on.
3) The machine running into normal working the fans inside the jammer start to work, making some noise. The jamming system enters into normal working status. 4) Adjust the output power each Band
Output Power Switch From 0 (OFF) to Max
Adjustable Output Power each Band VSWR over protection for each modular
5) Once you stop the jammer, switch off it, and then the device will stop working.
4 Notes 1) As this jammer is a high power jammer, it is normal the jammer machine will get heat after it continuously work for some time. 2) Please try to put the device in a higher position while it is working. The advised height is
about 2M between the jammer and the floor to avoid the loss of function of the device, please avoid the device placed near some metal materials. 3) Do not switch on the device before the antennas are not installed, If the antenna is not properly installed in accordance with the manuals, the shielding range will be not so good. Even the device will be burned and damaged. Make sure the correct installation of the antennas. For your country voltage is 110V and you use DC 12V to AC 220V Inviter Step 1: Switch your power supply from 110V to 220V when you use DC to AC Inverter (Very Important)
Make Sure‌‌ Switch Your Voltage from 110V to 220V Inventor only support AC 220V, not 110V