CT-3077BC Jammer Operating Guide (Version 13.11)
Jammers4u Confidential
Document version 13.11 Nov 2013
If you have any comments, please contact Jammers4u: Email: sales@jammers4u.com
Disclaimer: Information in this document is subject to change without notice. No part of this publication may be reproduced, photocopied, stored in a retrieval system, or transmitted without the express prior written consent of Jammers4u
All other brands and product names are trademarks or registered trademarks of their respective companies or organizations.
1. Introduction This is the operating guide for the JAMMER jammer unit from Jammers4u. This robust jammer is used to block for the following frequency ranges: CT-3077BC
Battery 45AH
(7 bands)
850-895MHz :25W 920-965MHz 25W 1800-1990MHz 15W 2100-2170MHz: 15W 460-470MHz: 20W 130-180MHz: 20W VHF Walkie-Talkie 400-480MHz: 20W UHF Walkie-Talkie Total : 140 W
Option: GPS L2 L3 L4 L5: 8W, VHF 130-180MHz: 20W, UHF 420-480MHz: 20W, 4G 2620-2690MHz: 5W, LoJack 173MHz: 20W Adjustable Output Power each Band/Channel, Max Output Power to 0 (OFF) VSWR over protection for each modular
Battery
Can Have +24V / 45AH LiFePO4 can work 2 Hours (CT-3077BC)
Power supply:
AC110 or 220-240V /DC 27V
Jamming Range
Radius 50~150 meters (-75dBm@Omnidirectional antennas)
Weight
CT-3077BC 25kg
Dimension:
518 x 428 x 228 mm (Case only )
Working time:
Without the time limit, May continue to work,
Antenna
External Omni 500mm long or Directional Patch Panel Antennas (Both omni and directional antennas with frame are inlcuded)
Warranty:
1 year
2. How to Use this Operating Guide Before you use this operating guide, follow the below points:
We advise you to read through the introductory sections on safety standards, the product, and accessories, so that you have some basic understanding of the product, before starting the installation. If you know about the unit accessories and their characteristics, you can move to the installation and operation chapter starting from page 19. However, the introductory material may still be useful as a reference.
To operate the jammer using remote configuration from the notebook, follow the procedures starting on page 30.
You should refer to the Maintenance section on page xx for general information on maintaining the jammer unit.
To understand more about the technical features of the CT-3077BC JAMMER unit, refer to the Specifications chapter on page 38.
3. JAMMER Users This operating guide is best suited for users in the military and police forces who wish to perform Cell Phone jamming operations. To carry out operations with maximum safety and efficiency, it is best advised that more than one operator is available on hand. With some operations, such as carrying the unit in Pelican cases, it is mandatory that two or more personnel are available. This operating guide is also useful for technicians who wish to analyze and troubleshoot product operations. The troubleshooting and specifications sections on page XX should be most useful for these users.
4. CT-3077BC JAMMER Safety Standards Before using the CT-3077BC JAMMER, please read the following safety guidelines, and make sure you comply with local laws and regulations relating to radio transmittal. Failure to comply with these guidelines may be dangerous or illegal. In event of doubt, please consult your local Jammers4u distributor
5. The Product
The CT-3077BCB JAMMER product consists of the following: ď Ź
Main unit that allows you to control jamming. The unit is housed in a Pelican case.
Mandatory accessories that are used with the unit, including cables, antennas. Techwise will automatically supply these items to you. Before assembling the jammer system, you must make sure that you have the unit and all accessories that you require. It is important that you not only check the equipment, but that you have some understanding of their functions before selecting an installation procedure:
5.1 Packaging Carton packaging is provided for the product. The JAMMER unit itself is provided in one box, while the antennas & all cabling accessories are provided in the other boxes.
CT-3077BC Each Set Two Boxes #1, Main Jammer + 7 x Magnetic Base #2, All antennas + Accessories
5.2 CT-3077BC JAMMER Unit The JAMMER consists of a control unit that allows you to jam specific cellular frequencies. The unit consists of controls; and an aluminum chassis casing, with holes to provide ventilation. The control panel that lets you perform the following:
Power ON/OFF
Fans Power ON/OFF
Antenna’s Connector
AC adapter / battery charger
JAMMER Accessories You will be provided with the following accessories when you purchase the JAMMER. You can purchase optional accessories from Jammers4u. All units and accessories have a 1 year warranty agreement. It is important that you not only check the accessories, but that you have some understanding of their functions before selecting an installation procedure
Antenna The following picture shows an antenna used in land installations. be attached to an antenna holder. 130MHz & 400MHz
Wide band,
Omni Antennas
800/900/1800/2100MHz Directional Antennas
850/920/1800/2100 /450MHz 500mm long Omni
450MHz Directional Antennas
Antennas
130-180MHz and 400-480MHz only have Omni antennas, no Directional Antennas
RF Cable / Antennas Magnetic Base As shown below lets you connect the JAMMER to the antenna. It measures a maximum of Three meters.
AC Power Cable
130MHz & 400MHz
850/900/1800/2100/4
Omni Antennas
50MHz Omni Antennas
Magnetic Base
Magnetic Base
An AC power cables lets you connect the jammer to the AC power supply. It must be used with the AC power supply.
6. JAMMER Installation and Operation Assembling the Antenna Three Options: 1. Connect 500mm Long Omni antennas on top of Jammer directly
#7
#1
#2
#3
#4
#5
#6
400MHz
2100MHz
850MHz
1800MHz
450MHz
920MHz
130MHz
Band
Band
Band
Band
Band
Band
Band
2. Connect Directional Patch Panel Antennas with Frame
3. Connect Omni Antennas with Magnetic Base
Procedure for Connecting Components You need to connect the power supply AC, as well the antenna and notebook via the respective cables. For external battery Step: 1 Connect Battery Cables All antennas
option use Long Red Cable Connect Charger cable Two Short Red Color Cables
Connect Battery cable Two Long Black Color Cables
Step: 2 Connect Charger Cable: RED LED “ON” All antennas
Connect Charger cable Two Short Red Color Cables Red LED ON When CT-3077BC is shipping, the battery can not connect for safety purpose. Step: 3 Connect all Antennas All antennas
To connect components (Connect all Antennas First) #1
#2
#3
#4
#5
130MHz & 400MHz Omni Antennas Can use both Freq
Once you have finished the procedures on connecting components, you are ready
Step: 4 Turn Main Power ON antennas toAll operate the jammer and modules.
Powering Up the Jammer
Step: 4 Turn Each Band Power ON
Each Band Power Switch
Adjustable Output Power each Band VSWR over protection for each modular
Output Power Switch From 0 (OFF) to Max
How to Charge the Battery
Battery is LiFePO4 +24V/45AH, 6Amp Battery Charger
When you plug AC 110V or 220V, the Battery Charger LED is Red + Orange ON Meaning Charging Battery LED is Red ON
LED: Red +Green Battery Fully Charging (Need 6-8 Hours Around)