Internship Report Architecture 2019

Page 1

Summary Portfolio Jonathan Boettger

Internship at aigplus architects Duesseldorf November 2019- June 2020


First meeting The office has meetings at the beginning of the month to discuss relevant issues within the office such as Software. Additionally, each team member gives a status update to see where they are at with their project With a large variety in projects and loads of ideas germinating around a table; it is often the case that these meetings are too short to discuss all matters in one sitting.


07.12.19


Aerial Perspective


Container School Cologne aigplus

Began to help within this project setting out Colour concepts aswell as entrance layout. This school was made due to their primary building being refurbished. This will be there temporary home; therefore the task is to make it feel like their new home.


Entrance There were many areas of development during this project. The entrance required excessive thought, as it is located right next to the road. The challenge was where to place the threshold (the gates) to allow for maximum space for children to be inside and safe.

Entrance Layout Option 1

Entrance Layout Option 2


Colour Concept Initially colour concepts were used that did not have any background story to them. Instead we had the idea that each classroom was able to be identified from the outside through colour code. Each classroom would have its own colour much like the build up of a lego piece. This creates a vibrant and visually enhancing building for the children to be excitedt o go within on a daily basis. Lego Concept

Courtyard Colour

Entrance Perspective


Construction Screw Foundations were used for the construction of the school. I was involved in two different meetings with a variety of project workers. I was able to get a better understanding of the foundations and how proposals are brought to the table for construction purposes.

Classroom

Meeting

The biggest takeaway from these series of meetings were the costs.

Foundations on indivvi

Meetin


idual Container

ng Notes

Construction


Aerial Perspective Render Taken from Revit Model from aigplus



Early vision for Project


Garage Conversion aigplus Cologne This was the first Project given to me for full responsibility. I was able to bring this project through the 1-4 Plan of Work phases (Leistungsphasen). This gave me the opportunity to see how an idea goes to a constructed space.


First Idea Sketches for Floor Build Up


Idea Development and Context


Wall Build Up Once the idea of the building is there, the build up of the wall had to be measured and calculated. I was tasked with finding the U value of the roof and wall. Here I was able to apply lessons learnt from University to gather a concrete value to send to the Engineers. The build up of the wall would be translated to the roof. Where both house similar materials in order to reduce costs. Main Materials: Insulation Timber Putzschicht Gibskarton

U Value Calculations

3D build up of wall including Neighbours Garage (Brick)


Roof Structure Understanding the structure of the building is one of the first steps to take as it is the skeleton of the building. The initial idea was to have a slanted roof in order to bring light in from above. This was however changed due to the floor being extended higher up.

Flat Roof Slanted Roof Connection of Wall and Roof

will be timber. With beams connected from the house over to posts sitting next to the neighbour garage. The floor will be lifted in order to reach the level of the ground floor in the house (OKFF EG).


Option 1 - Slanted Roof - Not Chosen


Option 2 - Flat Roof - Chosen


House Plan wi Taken from Revit Mo


ith Garage 1:100 odel property of aigplus


North Elev Taken from Revit Mod


vation - 1:50 del property of aigplus


Aerial Perspective


Institut fuer Kunststoffverarbeitung aigplus Aachen Helped in writing out plans for a large scale refurbishment project. This consisted of converting a hall into a Univeristy in Aachen. A much larger scale project to the previous two.


Supporting Construction I was able to support during the construction plans (Rohbau) where we worked from foundations to the roof. We were communicating with the engineer throughout the process for variations in foundations and loads on floors.

3D Perspective Taken from Revit Model property of aigplus


Supported with Media Channels

Drew the Insulation around the building

Sent plans to engineers for loads on certain floors, which have to have a certain foundation pile underenarth


Roof Conversion aigplus Duisberg

Helped with a roof refurbishment where the interior had to be redesigned which included necessary new windows and fire escapes.

Roof Sketch

Taken


East Elevation n from Revit Model property of aigplus


Sketches of First M project withi


Meeting on another in the office.


My O


Office


aig+ Architekten und Ingenieurgesellschaft SchiessstraĂ&#x;e 55 40549 DĂźsseldorf


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.