SCHULZE HEAT PRESS

SCHULZE SWING X

The SCHULZE Swing S / SX series can be seen as a highlight among the manual transfer presses. The Schulze Swing S series not only opens automatically. No! The heating plate is also automatically moved to the side. So you only need to worry about inserting the textile part. Regardless of whether you use the SCHULZE Swing S / SX series for caps, umbrellas, bags or many other things. You will be pleasantly surprised by the quick set-up time of the various heating and base plates. A sturdy under-table is included in the standard scope of delivery of the press.

Print format: Machine size: Power input: Temperature: Temperature accurancy Heating capacity: Preheating time Time setting: Contact pressure: Weight:

400 x 500 mm 170 x 60 x 85 cm 230 V max. 220 °C +- 0,5% 2 kW 12 min max 9 min 59 sec. max. 1050 kg 160 kg Print format: Machine size: Power input: Temperature: Temperature accurancy Heating capacity: Preheating time Time setting: Contact pressure: Weight: 400 x 500 mm 1840 x 860 x 940 mm 230 V max. 220 C +- 0,5% 2.4 kW 12 min max. 12 min max. 1050 kg 90 kg

SCHULZE AIRPRESS X

SCHULZE BLUE PRESS SWING

SCHULZE BIG LITE PNEU PRESS

TABLE

Under table with large shelf.

Max load: 150 kg Size: 90 x 73 x 75 cm

Transmatic pallets 13 x 13 cm 15 x 15 cm 38 x 10 cm 20 x 30 cm 38 x 18 cm 38 x 28 cm 30 x 35 cm 38 x 38 cm 50 x 40 cm Schulze pallets Baseplate straight 12 x 12 cm Baseplate straight 20 x 20 cm Sleeve palette 10 x 45 cm Baseplate straight 25 x 25 cm Baseplate 38 x 45 cm Baseplate 40 x 50 cm Baseplate oval ca. 23 x 41 cm Baseplate round Ø 130mm Baseplate round Ø 180mm Baseplate for cap press 8 x 16 cm

Baseplate 15 x 15 cm Baseplate set for round label Baseplate 28 x 35 cm Baseplate for textile printing 40 x 50 cm Baseplate 10 x 13 cm Baseplate 22 x 32 cm Baseplate 70 x 100 cm Base plate for shoes 40 x 50 cm Baseplate polo 30 x 50 cm Baseplate for DTG 38 x 45 cm

TRANSMATIC AND SCHULZE BOTTOM PLATES AND PALLETS

SCHULZE PRETREATMAKER IV

The Schulze PRETREATmaker IV is an automatic high-end pretreatment machine for professional high volume customers resulting from consistent refinement and trend insights. As a novelty the unit is equipped with a multiphase motor (step motor). This Pretreatment Machine does have a total of 4 spray valves which can be individually switched on or off. The maximum spray area is 16 in width and 24 in length. The width can be regulated by switching the 4 spray nozzle valves on or off.

Therefore the minimal spray width is 4.7 inches – the ideal width for chest prints. The length can be regulated in 0.78 inches intervals. Spraying is possible uni- and bi-directional. This will allow each user to setup the unit according to their needs. Within the carriage there is an additional filter which traps dirt from pump and tubes. This innovative filter will help to minimize clogging of the nozzles. » FLEXIBLE AND CONSISTENT SPRAY AMOUNT ADJUSTMENT

» FLEXIBLE AND ACCURATE SPRAY LENGTH ADJUSTMENT: 1 INCHES

TO 20 INCHES

» 4 SPRAY NOZZLES

» SPRAY AREA: 16 X 24 CM

» MOST ADVANCED TOUCH SCREEN CONTROL

» BARCODE INTEGRATION CAPABILITY