INDUSTRIAL
PRODUCT GUIDE
KNOW-HOW TO PROTECT 速
INDEX
Metal protection
COMBICOLOR® METAL PAINT
Page
Combicolor metal paint 3 Adhesion primer 4 Primer for rusty metal 5 Zinc spray 6 Metal paint aerosol 7 Rust primer aerosols 8 Heat resistant paint 9 Metal cladding primer 10 Metal cladding topcoat 11 High performance anti-corrosion topcoat 12
Floor protection
Page
Quick drying single pack paint 13 Dust-proof concrete sealer 14 Tyre resistant single pack paint 15 Solvent-based high-build epoxy 16 Water-based durable epoxy coat 17 Food-grade solvent-free epoxy 18 Single pack solvent-based PU 19 Line marking aerosol 20 Epoxy repair mortar 21 22 Rapid impregnation primer Water-based UV-resistant topcoat 23 Primer powerfloated concrete 24 Adhesion primer 25 Anti-slip additive 26 Anti-slip aerosol 27
Waterproofing
Page
Instant waterproofing roofs/gutters 28 Waterproofing exterior wall paint 30 Waterproofing aerosol 31
Cleaning & Maintenance
Page
Lubrication 32 Paint stripper 33 Etching solution 34 Alkaline cleaner/degreaser 35
2
PRIMER AND
TOPCOAT IN ONE! • Primer and topcoat in one • For interior & exterior use • One coat hiding, good flow properties • White spirit dilutable • Usable down to 5 °C
AVAILABLE IN EVERY COLOUR
RAL, NCS, BS & MORE GLOSS, Satin, matt
Suitable for:
Metal
Structural steel
Wrought iron
Technical info ® For use on: Bare, Bare or manually manually derusted derusted or steel with CombiPrimer or steel primed ® primed with CombiPrimer steel Brush: 10,5 m²/l Spray: 2-3 m²/aerosol Coverage: 10.5 m²/brush - 2-3 m²/spray Touch dry (at 20˚C): 2 hrs Recoatable (at 20˚C): 16 hrs (can) 2 hrs (aerosol) Application: Brush, roller, aerosol, airless Product code: 7300 Pack sizes: 250ml, 750ml, 400ml, 2.5l
3
INDEX
Metal protection
COMBICOLOR® METAL PAINT
Page
Combicolor metal paint 3 Adhesion primer 4 Primer for rusty metal 5 Zinc spray 6 Metal paint aerosol 7 Rust primer aerosols 8 Heat resistant paint 9 Metal cladding primer 10 Metal cladding topcoat 11 High performance anti-corrosion topcoat 12
Floor protection
Page
Quick drying single pack paint 13 Dust-proof concrete sealer 14 Tyre resistant single pack paint 15 Solvent-based high-build epoxy 16 Water-based durable epoxy coat 17 Food-grade solvent-free epoxy 18 Single pack solvent-based PU 19 Line marking aerosol 20 Epoxy repair mortar 21 22 Rapid impregnation primer Water-based UV-resistant topcoat 23 Primer powerfloated concrete 24 Adhesion primer 25 Anti-slip additive 26 Anti-slip aerosol 27
Waterproofing
Page
Instant waterproofing roofs/gutters 28 Waterproofing exterior wall paint 30 Waterproofing aerosol 31
Cleaning & Maintenance
Page
Lubrication 32 Paint stripper 33 Etching solution 34 Alkaline cleaner/degreaser 35
2
PRIMER AND
TOPCOAT IN ONE! • Primer and topcoat in one • For interior & exterior use • One coat hiding, good flow properties • White spirit dilutable • Usable down to 5 °C
AVAILABLE IN EVERY COLOUR
RAL, NCS, BS & MORE GLOSS, Satin, matt
Suitable for:
Metal
Structural steel
Wrought iron
Technical info ® For use on: Bare, Bare or manually manually derusted derusted or steel with CombiPrimer or steel primed ® primed with CombiPrimer steel Brush: 10,5 m²/l Spray: 2-3 m²/aerosol Coverage: 10.5 m²/brush - 2-3 m²/spray Touch dry (at 20˚C): 2 hrs Recoatable (at 20˚C): 16 hrs (can) 2 hrs (aerosol) Application: Brush, roller, aerosol, airless Product code: 7300 Pack sizes: 250ml, 750ml, 400ml, 2.5l
3
ADHESION PRIMER
COMBIPRIMER
MAKES THE SMOOTHEST
SURFACES COATABLE! • Ideal for galvanised steel • Also adheres to aluminium, PVC, stainless steel, etc • Transparent blue appearance • Very high coverage: 35 m2 per litre
FOR EVEN LONGER
ANTI-RUST PROTECTION! • For use on bare or manually derusted metal • Red for dark topcoats, grey for light topcoats • Lead and chromate free • Longer anti-rust protection!
Suitable for:
(Galvanised) steel
4
Aluminium
Suitable for:
PVC
Bare steel
Technical info
Technical info
For use on: Smooth, dense surfaces Coverage: Brush: 35 m²/l Spray: 4-5 m²/aerosol Recoatable (at 20˚C): After 30 minutes but within 24 hours Curing time (at 20˚C): Remains tacky Application: Brush, aerosol Product code: 3302 Pack sizes: 250 ml, 750 ml, 400 ml
For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
Rusted steel
New, bare or slightly rusted steel surfaces Brush: 12,8 m²/l Spray: 2-3 m²/aerosol 1 hr 2 hrs Brush, roller, aerosol 3369, 3380 250ml, 750ml, 400ml, 2.5l
5
ADHESION PRIMER
COMBIPRIMER
MAKES THE SMOOTHEST
SURFACES COATABLE! • Ideal for galvanised steel • Also adheres to aluminium, PVC, stainless steel, etc • Transparent blue appearance • Very high coverage: 35 m2 per litre
FOR EVEN LONGER
ANTI-RUST PROTECTION! • For use on bare or manually derusted metal • Red for dark topcoats, grey for light topcoats • Lead and chromate free • Longer anti-rust protection!
Suitable for:
(Galvanised) steel
4
Aluminium
Suitable for:
PVC
Bare steel
Technical info
Technical info
For use on: Smooth, dense surfaces Coverage: Brush: 35 m²/l Spray: 4-5 m²/aerosol Recoatable (at 20˚C): After 30 minutes but within 24 hours Curing time (at 20˚C): Remains tacky Application: Brush, aerosol Product code: 3302 Pack sizes: 250 ml, 750 ml, 400 ml
For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
Rusted steel
New, bare or slightly rusted steel surfaces Brush: 12,8 m²/l Spray: 2-3 m²/aerosol 1 hr 2 hrs Brush, roller, aerosol 3369, 3380 250ml, 750ml, 400ml, 2.5l
5
ZINC SPRAY
HARD HAT® FINISHES
GALVA ZINC
INDUSTRIAL
• Cathodic protection of bare and galvanised steel • 90% zinc in the dry film (99% pure zinc) • To protect bare, rust free metal and galvanised • Ideal for touching-up larger areas • To recoat with HARD HAT® metallic sprays
• Top quality • For use on bare metal, wood and concrete • Touch dry after 30 minutes (at 20°C) • Best available hiding power • Heat-resistant up to 100 °C
THE BEST PROTECTION
QUALITY AEROSOLS
Suitable for:
Welded joints
Structural steel
Suitable for:
Wrought iron
Technical info For use on: Coverage: Recoatable (at 20˚C): Touch dry (at 20˚C): Application: Product code: Pack sizes:
6
Bare steel
Galvanized steel
Technical info New, bare steel, blasted steel or galvanized steel surfaces 13m²/l (can) 2.3m² /aerosol Finish: Matt Within 1 hour or after 48 hours 15 min. (can), 10 min (aerosol) Brush or aerosol 1085, 2185 1 Kg, 500 ml ZINC
For use on: New, bare steel, blasted steel or galvanized steel surfaces Coverage: 2,5 m² per spray can at 25 μm dry Recoatable (at 20˚C): Within 1 hour or after 48 hours Touch dry (at 20˚C): 15 minutes Application: Aerosol Product code: 2100 Pack sizes: 500ml
7
ZINC SPRAY
HARD HAT® FINISHES
GALVA ZINC
INDUSTRIAL
• Cathodic protection of bare and galvanised steel • 90% zinc in the dry film (99% pure zinc) • To protect bare, rust free metal and galvanised • Ideal for touching-up larger areas • To recoat with HARD HAT® metallic sprays
• Top quality • For use on bare metal, wood and concrete • Touch dry after 30 minutes (at 20°C) • Best available hiding power • Heat-resistant up to 100 °C
THE BEST PROTECTION
QUALITY AEROSOLS
Suitable for:
Welded joints
Structural steel
Suitable for:
Wrought iron
Technical info For use on: Coverage: Recoatable (at 20˚C): Touch dry (at 20˚C): Application: Product code: Pack sizes:
6
Bare steel
Galvanized steel
Technical info New, bare steel, blasted steel or galvanized steel surfaces 13m²/l (can) 2.3m² /aerosol Finish: Matt Within 1 hour or after 48 hours 15 min. (can), 10 min (aerosol) Brush or aerosol 1085, 2185 1 Kg, 500 ml ZINC
For use on: New, bare steel, blasted steel or galvanized steel surfaces Coverage: 2,5 m² per spray can at 25 μm dry Recoatable (at 20˚C): Within 1 hour or after 48 hours Touch dry (at 20˚C): 15 minutes Application: Aerosol Product code: 2100 Pack sizes: 500ml
7
Primer for rusty metal
HEAT RESISTANT COATINGS
ANTI RUST PRIMERS
FOR TEMP.
• Ready to recoat after just 10 min, touch dry after 30 min • For new or slightly rusty surfaces • Lead and chromate free • Penetrates deeply into the surface and does not
• For continuous temperatures up to 650°C • For peak temperatures up to 750°C* • For use on bare metal or slightly rusted surfaces • Touch dry after 3 hours (at 20°C)
GIVE RUST NO CHANCE
UP TO 750ºC
*
give rust a chance * Max. temperature for a short period
Suitable for:
Rusted metal
Suitable for:
Bare steel
BBQ
Steam pipes
Technical info
Technical info
For use on: New, bare or slightly rusted steel surfaces Coverage: 5.5 m² /aerosol. Finish: Matt Recoatable (at 20˚C): Within 1 hour or after 48 hours Touch dry (at 20˚C): 15 min. Application: Aerosol Product code: 2169, 2182 NOW AVAILABLE Pack sizes: 500 ml
For use on: Engines, heat cannons, steam pipes, boilers, vents, barbecues, stoves Coverage: 2 m² (per spray), 10-12m²/l. (can) Recoatable (at 20˚C): Within hour or after 48 hours Touch dry (at 20˚C): 1 hr (aerosol), 2 hrs (can) Application: Brush, aerosol Product code: 7715, 7778, 1015, 1078 Pack sizes: 750ml, 2.5l
NEW! IN EVERY COLOUR
8
Blasted steel
9
Primer for rusty metal
HEAT RESISTANT COATINGS
ANTI RUST PRIMERS
FOR TEMP.
• Ready to recoat after just 10 min, touch dry after 30 min • For new or slightly rusty surfaces • Lead and chromate free • Penetrates deeply into the surface and does not
• For continuous temperatures up to 650°C • For peak temperatures up to 750°C* • For use on bare metal or slightly rusted surfaces • Touch dry after 3 hours (at 20°C)
GIVE RUST NO CHANCE
UP TO 750ºC
*
give rust a chance * Max. temperature for a short period
Suitable for:
Rusted metal
Suitable for:
Bare steel
BBQ
Steam pipes
Technical info
Technical info
For use on: New, bare or slightly rusted steel surfaces Coverage: 5.5 m² /aerosol. Finish: Matt Recoatable (at 20˚C): Within 1 hour or after 48 hours Touch dry (at 20˚C): 15 min. Application: Aerosol Product code: 2169, 2182 NOW AVAILABLE Pack sizes: 500 ml
For use on: Engines, heat cannons, steam pipes, boilers, vents, barbecues, stoves Coverage: 2 m² (per spray), 10-12m²/l. (can) Recoatable (at 20˚C): Within hour or after 48 hours Touch dry (at 20˚C): 1 hr (aerosol), 2 hrs (can) Application: Brush, aerosol Product code: 7715, 7778, 1015, 1078 Pack sizes: 750ml, 2.5l
NEW! IN EVERY COLOUR
8
Blasted steel
9
SI
H
AS
EA
USE • WATER QUE BA
SI
ERBASSIERT ASS •W
ER BASED • E WAT NP
USE • WATER QUE BA
ERBASSIERT ASS •W
ER BASED • E WAT NP
EA
S
AS
METAL CLADDING TOPCOAT
S
H
METAL CLADDING PRIMER
Water based
DURABLE
• Quick drying, can be overcoated after just 1 hour • Good anti-corrosion primer • Ideal for over coating with Metal Cladding Topcoat • Excellent flow
• Very decorative satin topcoat • Easy to clean and to maintain • Excellent flow and aspect
metal CLADDING PRIMER decorative topcoat
• Good opacity • Long lasting finish and excellent UV-resistance
Suitable for:
Suitable for:
Plastisol All® metalMetal substrates Galvanised
All metal substrates
Technical info
Technical info
For use on: (Galvanised) metal, Plastisol® Coverage: 12.5 m²/l. Finish: Matt Touch dry (at 20˚C): 30 min. Recoatable (at 20˚C): 1 hr Application: Brush, roller, airless Product code: 272.XX.10 Pack sizes: 10l
For use on: Metal Cladding Primer, Noxyde®, Peganox® Coverage: 8m²/l at 45 µm dry Touch dry (at 20˚C): 1 hr Recoatable (at 20˚C): 8 hrs Application: Brush, roller, airless Product code: 272.XX.10P Pack sizes: 10l
10
11
SI
H
AS
EA
USE • WATER QUE BA
SI
ERBASSIERT ASS •W
ER BASED • E WAT NP
USE • WATER QUE BA
ERBASSIERT ASS •W
ER BASED • E WAT NP
EA
S
AS
METAL CLADDING TOPCOAT
S
H
METAL CLADDING PRIMER
Water based
DURABLE
• Quick drying, can be overcoated after just 1 hour • Good anti-corrosion primer • Ideal for over coating with Metal Cladding Topcoat • Excellent flow
• Very decorative satin topcoat • Easy to clean and to maintain • Excellent flow and aspect
metal CLADDING PRIMER decorative topcoat
• Good opacity • Long lasting finish and excellent UV-resistance
Suitable for:
Suitable for:
Plastisol All® metalMetal substrates Galvanised
All metal substrates
Technical info
Technical info
For use on: (Galvanised) metal, Plastisol® Coverage: 12.5 m²/l. Finish: Matt Touch dry (at 20˚C): 30 min. Recoatable (at 20˚C): 1 hr Application: Brush, roller, airless Product code: 272.XX.10 Pack sizes: 10l
For use on: Metal Cladding Primer, Noxyde®, Peganox® Coverage: 8m²/l at 45 µm dry Touch dry (at 20˚C): 1 hr Recoatable (at 20˚C): 8 hrs Application: Brush, roller, airless Product code: 272.XX.10P Pack sizes: 10l
10
11
QUICK DRYING EXTERIOR FLOOR PAINT
EA
USE • WATER QUE BA
SI
ERBASSIERT ASS •W
ER BASED • E WAT NP
AS
S
H
HIGH PERFORMANCE ANTI-CORROSION TOPCOAT
MAXIMUM
MULTI-PURPOSE
• Unrivalled corrosion protection and waterproofing • Primer and topcoat in one • Protects against cracking and peeling • Prevents rust from spreading • UV-resistant and protects against abrasion
• Rain-proof and recoatable after just one hour! • Can be applied on slightly damp surfaces • Excellent resistance to U.V. and weathering • Water-based formulation; formulation, safe to use & virtually no odour • Single pack, no mixing required
METAL PROTECTION
QUICK DRYING FLOOR PAINT
Suitable for:
New/untreated Plastisol® porousMetal mineral surfaces, Galvanised (concrete) Technical info For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
12
Suitable for:
Asphalt
Concrete
Pavement
Technical info Iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper,zinc, lead, etc. 3m²/l at 175 µm dry 1.5 hrs 24 hrs Brush, roller, airless 5.XX 1 kg, 5 kg, 20 kg
For use on: Coverage: Recoatable Touch dry (at (at20˚C): 20˚C): Touch dry (at Recoatable (at20˚C): 20˚C): Application: Product code: Pack sizes:
Asphalt, concrete, pavement, masonry, sports fields 8m²/l.atat56 8m²/l 56µm µmdry. dry.Finish: Finish:Matt Matt 1 hrmin. 30 130hrmin. Brush, roller 6100 5l. 5l
13
QUICK DRYING EXTERIOR FLOOR PAINT
EA
USE • WATER QUE BA
SI
ERBASSIERT ASS •W
ER BASED • E WAT NP
AS
S
H
HIGH PERFORMANCE ANTI-CORROSION TOPCOAT
MAXIMUM
MULTI-PURPOSE
• Unrivalled corrosion protection and waterproofing • Primer and topcoat in one • Protects against cracking and peeling • Prevents rust from spreading • UV-resistant and protects against abrasion
• Rain-proof and recoatable after just one hour! • Can be applied on slightly damp surfaces • Excellent resistance to U.V. and weathering • Water-based formulation; formulation, safe to use & virtually no odour • Single pack, no mixing required
METAL PROTECTION
QUICK DRYING FLOOR PAINT
Suitable for:
New/untreated Plastisol® porousMetal mineral surfaces, Galvanised (concrete) Technical info For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
12
Suitable for:
Asphalt
Concrete
Pavement
Technical info Iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper,zinc, lead, etc. 3m²/l at 175 µm dry 1.5 hrs 24 hrs Brush, roller, airless 5.XX 1 kg, 5 kg, 20 kg
For use on: Coverage: Recoatable Touch dry (at (at20˚C): 20˚C): Touch dry (at Recoatable (at20˚C): 20˚C): Application: Product code: Pack sizes:
Asphalt, concrete, pavement, masonry, sports fields 8m²/l.atat56 8m²/l 56µm µmdry. dry.Finish: Finish:Matt Matt 1 hrmin. 30 130hrmin. Brush, roller 6100 5l. 5l
13
DUST-PROOF CONCRETE SEALER
EA
USE • WATER QUE BA
SI
H
USE • WATER QUE BA
ER BASED • E WAT NP
EA
SI
ERBASSIERT ASS •W
ERBASSIERT ASS •W
ER BASED • E WAT NP
AS
S
AS
Light-Medium traffic S
H
Dust proofing
SINGLE PACK floor PAINT
EPOXYSHIELD® SEALER
EPOXYSHIELD® ULTRA
• Water based, cost-effective, quick drying • Single pack, easy to apply • Non-yellowing clear finish (gloss) • Protects against moisture and road salts • Ideal primer for EpoxyShield® ULTRA coatings
• Single pack, water based • For light to medium traffic • Touch dry after just 2 hours • Satin matt finish • Good resistance to various chemicals
EXCELLENT DUST-PROOFER RESISTANT TO CHEMICALS
Suitable for:
Suitable for:
Concrete
Concrete floors
Technical info
Technical info
For use on: Concrete floors Coverage: Approx. 10 m²/l Touch dry (at 20˚C): 1 hr Recoatable (at 20˚C): 6 hrs Application: Roller Product code: 5220 Pack sizes: 5l
For use on: Concrete floors Coverage: 9 m²/l Touch dry (at 20˚C): 2 hrs Recoatable (at 20˚C): 6 hrs Application: Roller Product code: 5200 Pack sizes: 5l
14
15
DUST-PROOF CONCRETE SEALER
EA
USE • WATER QUE BA
SI
H
USE • WATER QUE BA
ER BASED • E WAT NP
EA
SI
ERBASSIERT ASS •W
ERBASSIERT ASS •W
ER BASED • E WAT NP
AS
S
AS
Light-Medium traffic S
H
Dust proofing
SINGLE PACK floor PAINT
EPOXYSHIELD® SEALER
EPOXYSHIELD® ULTRA
• Water based, cost-effective, quick drying • Single pack, easy to apply • Non-yellowing clear finish (gloss) • Protects against moisture and road salts • Ideal primer for EpoxyShield® ULTRA coatings
• Single pack, water based • For light to medium traffic • Touch dry after just 2 hours • Satin matt finish • Good resistance to various chemicals
EXCELLENT DUST-PROOFER RESISTANT TO CHEMICALS
Suitable for:
Suitable for:
Concrete
Concrete floors
Technical info
Technical info
For use on: Concrete floors Coverage: Approx. 10 m²/l Touch dry (at 20˚C): 1 hr Recoatable (at 20˚C): 6 hrs Application: Roller Product code: 5220 Pack sizes: 5l
For use on: Concrete floors Coverage: 9 m²/l Touch dry (at 20˚C): 2 hrs Recoatable (at 20˚C): 6 hrs Application: Roller Product code: 5200 Pack sizes: 5l
14
15
Satin gloss epoxy floor paint for inside use
EA
USE • WATER QUE BA
SI
ERBASSIERT ASS •W
ER BASED • E WAT NP
AS
S
H
Two-pack, glossy epoxy for floors and metal
VERY DURABLE
water based
• High build coating (125 microns), very durable • For use on floors or metal • Full colour intensity in one coat • Available as Standard, High Solids or Winter Grade (0 °C) • Tintable in virtually any colour
• Exceptionally abrasion resistant • Easy to apply and clean • Nice smooth satin finish • Resistant to oil and solvents • Tintable in virtually any colour *
2-PACK EPOXY COATING
epoxy system
Suitable for:
Concrete
Rusted steel
Suitable for:
Bare metal
16
Floors (treated with primers)
Technical info
Technical info For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
Concrete
Concrete or floors treated with primers 6-7m²/l at 125 µm dry (depends on activator) 6-8 hrs (depends on activator) 16 hrs Brush, roller, airless 9100 1l, 5l
For use on: Concrete or floors treated with primers Coverage: 4.8m²/l at 100 µm dry Touch dry (at 20˚C): 9 hrs Recoatable (at 20˚C): 24 hrs (48 hrs at lower temperatures) Application: Roller, airless Product code: 19.XX Pack sizes: 4 Kg, 15 Kg
17
Satin gloss epoxy floor paint for inside use
EA
USE • WATER QUE BA
SI
ERBASSIERT ASS •W
ER BASED • E WAT NP
AS
S
H
Two-pack, glossy epoxy for floors and metal
VERY DURABLE
water based
• High build coating (125 microns), very durable • For use on floors or metal • Full colour intensity in one coat • Available as Standard, High Solids or Winter Grade (0 °C) • Tintable in virtually any colour
• Exceptionally abrasion resistant • Easy to apply and clean • Nice smooth satin finish • Resistant to oil and solvents • Tintable in virtually any colour *
2-PACK EPOXY COATING
epoxy system
Suitable for:
Concrete
Rusted steel
Suitable for:
Bare metal
16
Floors (treated with primers)
Technical info
Technical info For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
Concrete
Concrete or floors treated with primers 6-7m²/l at 125 µm dry (depends on activator) 6-8 hrs (depends on activator) 16 hrs Brush, roller, airless 9100 1l, 5l
For use on: Concrete or floors treated with primers Coverage: 4.8m²/l at 100 µm dry Touch dry (at 20˚C): 9 hrs Recoatable (at 20˚C): 24 hrs (48 hrs at lower temperatures) Application: Roller, airless Product code: 19.XX Pack sizes: 4 Kg, 15 Kg
17
FOOD-GRADE tile-like coating
SINGLE PACK SOLVENT-BASED PU
SOLVENT FREE
HARD WEARING
• High build coating (150 microns), very durable • Suitable for frequent cleaning with chemicals • Resistant to oils, solvents and many chemicals • Excellent resistance against immersion; can be
• Extra durable because of polyurethane addition • Excellent flow • Any colour in Gloss and Satin • Light to medium traffic, indoor/outdoor • High coverage: 9 m2/L per coat
eASY TO APPLY
EPOXY SYSTEM
used in swimming pools
Power floated concrete or concrete older than 28 days, but younger than 2 years should be primed first with 7201 Floorcoat PU Primer or etched.
Suitable for:
Concrete
Suitable for:
Primed floors
Concrete
Technical info
Technical info
For use on: Concrete or floors treated with primers Coverage: 6.7m²/l at 150 µm dry Recoatable (at 20˚C): 24 hrs Touch dry (at 20˚C): 24 hrs Application: Brush, roller Product code: 5500 Pack sizes: 4l
For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
Wood
Line marking
Concrete, wooden, brick or pre-painted floors 9 m²/l at 50 μm dry 4 hrs 24 hrs Brush, roller, airless 7200 2,5l, 5l
Coatings for use on food contact surfaces
18
19
FOOD-GRADE tile-like coating
SINGLE PACK SOLVENT-BASED PU
SOLVENT FREE
HARD WEARING
• High build coating (150 microns), very durable • Suitable for frequent cleaning with chemicals • Resistant to oils, solvents and many chemicals • Excellent resistance against immersion; can be
• Extra durable because of polyurethane addition • Excellent flow • Any colour in Gloss and Satin • Light to medium traffic, indoor/outdoor • High coverage: 9 m2/L per coat
eASY TO APPLY
EPOXY SYSTEM
used in swimming pools
Power floated concrete or concrete older than 28 days, but younger than 2 years should be primed first with 7201 Floorcoat PU Primer or etched.
Suitable for:
Concrete
Suitable for:
Primed floors
Concrete
Technical info
Technical info
For use on: Concrete or floors treated with primers Coverage: 6.7m²/l at 150 µm dry Recoatable (at 20˚C): 24 hrs Touch dry (at 20˚C): 24 hrs Application: Brush, roller Product code: 5500 Pack sizes: 4l
For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
Wood
Line marking
Concrete, wooden, brick or pre-painted floors 9 m²/l at 50 μm dry 4 hrs 24 hrs Brush, roller, airless 7200 2,5l, 5l
Coatings for use on food contact surfaces
18
19
Line marking AEROSOL
EPOXY REPAIR MORTAR
2 x stronger than concrete!
Perfect and DURABLE
EPOXY
• Sharp and durable lines • Better opacity • Adjustable line width (5-10cm) • Light traffic possible after just 4 hours (at 20°C) • Application possible down to 0° C
• Stands up to heavy traffic and many chemicals • For repairing eroded or damaged concrete, bay edges
lines in one go!
REPAIR MORTAR and broken steps • Does not shrink or crack • Easy all-in-1 packaging
Suitable for:
Asphalt
Metal
Suitable for forklift traffic
Suitable for:
Wood
Concrete
Masonry
Stone
Technical info
Technical info
For use on: Asphalt, concrete, grass, metal and wood Coverage: Up to 120 meters per can (5 cm line width) Recoatable (at 20˚C): Within 1 hour or after 48 hours Touch dry (at 20˚C): After 20 min. Application: Rust-Oleum® line applicators Product code: 2348, 2391 Pack sizes: 500 ml
For use on: Concrete, masonry, stone Coverage: 1.2m² per 10kg at 5 mm depth Recoatable (at 20˚C): 6 hrs Curing time (at 20˚C): 6 hrs for light traffic / 12 hrs for heavy traffic Application: Trowel Product code: 5180 Pack sizes: 2.5kg, 5kg, 25kg
20
21
Line marking AEROSOL
EPOXY REPAIR MORTAR
2 x stronger than concrete!
Perfect and DURABLE
EPOXY
• Sharp and durable lines • Better opacity • Adjustable line width (5-10cm) • Light traffic possible after just 4 hours (at 20°C) • Application possible down to 0° C
• Stands up to heavy traffic and many chemicals • For repairing eroded or damaged concrete, bay edges
lines in one go!
REPAIR MORTAR and broken steps • Does not shrink or crack • Easy all-in-1 packaging
Suitable for:
Asphalt
Metal
Suitable for forklift traffic
Suitable for:
Wood
Concrete
Masonry
Stone
Technical info
Technical info
For use on: Asphalt, concrete, grass, metal and wood Coverage: Up to 120 meters per can (5 cm line width) Recoatable (at 20˚C): Within 1 hour or after 48 hours Touch dry (at 20˚C): After 20 min. Application: Rust-Oleum® line applicators Product code: 2348, 2391 Pack sizes: 500 ml
For use on: Concrete, masonry, stone Coverage: 1.2m² per 10kg at 5 mm depth Recoatable (at 20˚C): 6 hrs Curing time (at 20˚C): 6 hrs for light traffic / 12 hrs for heavy traffic Application: Trowel Product code: 5180 Pack sizes: 2.5kg, 5kg, 25kg
20
21
WATER-BASED UV-RESISTANT TOPCOAT
EA
USE • WATER QUE BA
SI
ERBASSIERT ASS •W
ER BASED • E WAT NP
AS
S
H
RAPID IMPREGNATION PRIMER
EPOXY FLOOR
WATER BASED
• Overcoatable after just 4 hours: apply primer and
• Very durable and UV-resistant, colour and gloss retention • Very easy to clean (also with chemicals) • Very low odour, can be used indoors • High abrasion resistance, low wear • Flexible and impact resistant
PRIMER RAPID topcoat in 1 day! • Improves adhesion on brittle and porous surfaces • 2 components (base and activator) in 1 can • 100% solids
SATIN GLOSS POLYURETHANE
Suitable for:
Suitable for:
New/untreated porous mineral surfaces, (concrete)
Concrete
Technical info
Technical info
For use on: New or untreated porous mineral surfaces, like concrete Coverage: 10m²/l at 100 µm dry. Finish: Gloss Touch dry (at 20˚C): 3 hrs Recoatable (at 20˚C): 4 hrs Application: Roller, brush Product code: 5421 Pack sizes: 5l
For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
22
Metal
Concrete and metal prepared with RUST-OLEUM® epoxy- or acrylic system 9,2 m²/l at 40 µm dry 2 hrs 24 hrs Brush, roller, airless 9200 2.5l, 5l
23
WATER-BASED UV-RESISTANT TOPCOAT
EA
USE • WATER QUE BA
SI
ERBASSIERT ASS •W
ER BASED • E WAT NP
AS
S
H
RAPID IMPREGNATION PRIMER
EPOXY FLOOR
WATER BASED
• Overcoatable after just 4 hours: apply primer and
• Very durable and UV-resistant, colour and gloss retention • Very easy to clean (also with chemicals) • Very low odour, can be used indoors • High abrasion resistance, low wear • Flexible and impact resistant
PRIMER RAPID topcoat in 1 day! • Improves adhesion on brittle and porous surfaces • 2 components (base and activator) in 1 can • 100% solids
SATIN GLOSS POLYURETHANE
Suitable for:
Suitable for:
New/untreated porous mineral surfaces, (concrete)
Concrete
Technical info
Technical info
For use on: New or untreated porous mineral surfaces, like concrete Coverage: 10m²/l at 100 µm dry. Finish: Gloss Touch dry (at 20˚C): 3 hrs Recoatable (at 20˚C): 4 hrs Application: Roller, brush Product code: 5421 Pack sizes: 5l
For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
22
Metal
Concrete and metal prepared with RUST-OLEUM® epoxy- or acrylic system 9,2 m²/l at 40 µm dry 2 hrs 24 hrs Brush, roller, airless 9200 2.5l, 5l
23
PRIMER POWERFLOATED CONCRETE
ADHESION PRIMER
EPOXY POWERFLOAT
WATER-DILUTABLE
• Overcoatable after 3 hrs: apply primer & topcoat in 1 day! • Light grey colour to increase opacity of the next layers • Water-based so no odour and safe to use • Excellent flow • 2 components (base and activator) in 1 can
• Perfect bond without blasting or etching • Can be over coated with virtually any other paint/coating • Low material usage - A real cost saver • Water-based so no odour and safe to use • Excellent flow
FLOOR PRIMER RAPID
ADHESION PRIMER
Suitable for:
Concrete
Suitable for:
Masonry
Concrete
Technical info
Technical info
For use on: Concrete, Masonry, even non-porous, smooth surfaces like power-floated concrete Coverage: 10 m²/l at 50 µm dry Touch dry (at 20˚C): 1.5 hrs Recoatable (at 20˚C): 3 hrs Application: Roller Product code: 3366 Pack sizes: 5l
For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
24
Masonry
Smooth surfaces
Concrete, Masonry, even non-porous, smooth surfaces like power-floated concrete 41m²/l at 15 µm dry 6 hrs 16 hrs Brush, roller, spray 3333 1l, 5l
25
PRIMER POWERFLOATED CONCRETE
ADHESION PRIMER
EPOXY POWERFLOAT
WATER-DILUTABLE
• Overcoatable after 3 hrs: apply primer & topcoat in 1 day! • Light grey colour to increase opacity of the next layers • Water-based so no odour and safe to use • Excellent flow • 2 components (base and activator) in 1 can
• Perfect bond without blasting or etching • Can be over coated with virtually any other paint/coating • Low material usage - A real cost saver • Water-based so no odour and safe to use • Excellent flow
FLOOR PRIMER RAPID
ADHESION PRIMER
Suitable for:
Concrete
Suitable for:
Masonry
Concrete
Technical info
Technical info
For use on: Concrete, Masonry, even non-porous, smooth surfaces like power-floated concrete Coverage: 10 m²/l at 50 µm dry Touch dry (at 20˚C): 1.5 hrs Recoatable (at 20˚C): 3 hrs Application: Roller Product code: 3366 Pack sizes: 5l
For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
24
Masonry
Smooth surfaces
Concrete, Masonry, even non-porous, smooth surfaces like power-floated concrete 41m²/l at 15 µm dry 6 hrs 16 hrs Brush, roller, spray 3333 1l, 5l
25
ANTI-SLIP ADDITIVE
ANTI-SLIP AEROSOL
NON-SKID
MAKES EVERY SURFACE
• Thermally split flint stone granules provide a durable
• Spray coating with non-skid particles • It adheres to metal, wood, concrete, tiles and parquet • For interior and (light exposed) exterior use • Touch dry after 1 hour (at 20°C) • Available in transparent, black and yellow
FLOOR COAT ADDITIVE anti-slip finish • Choice of small (NS200), medium (NS300) and large (NS500) granules • Can be mixed into coating or broadcast over the final (wet) finish
NON-SKID IN A SECOND
Suitable for:
Concrete floors
Suitable for:
Wooden floors
26
Handles
Stair treads
Technical info
Technical info Particle size: Usage: Product code: Pack sizes:
Steps
0.2 - 0.5 mm (NS200) 0.5 - 1.0 mm (NS300) 0.8 - 1.5 mm (NS500) 8.8m²/l (=200g/l if mixed in) 4.4m²/l (=400g/l if mixed in) NS200, NS300, NS500 1 kg, 15 kg
For use on: Metal, wood, concrete, tile, parquet Coverage: 2,5 m²/aerosol. Finish: Satin Recoatable (at 20˚C): 1 hr Touch dry (at 20˚C): After 20 min. Application: Aerosol Product code: 2410, 2444, 2479 Pack sizes: 2 kg
27
ANTI-SLIP ADDITIVE
ANTI-SLIP AEROSOL
NON-SKID
MAKES EVERY SURFACE
• Thermally split flint stone granules provide a durable
• Spray coating with non-skid particles • It adheres to metal, wood, concrete, tiles and parquet • For interior and (light exposed) exterior use • Touch dry after 1 hour (at 20°C) • Available in transparent, black and yellow
FLOOR COAT ADDITIVE anti-slip finish • Choice of small (NS200), medium (NS300) and large (NS500) granules • Can be mixed into coating or broadcast over the final (wet) finish
NON-SKID IN A SECOND
Suitable for:
Concrete floors
Suitable for:
Wooden floors
26
Handles
Stair treads
Technical info
Technical info Particle size: Usage: Product code: Pack sizes:
Steps
0.2 - 0.5 mm (NS200) 0.5 - 1.0 mm (NS300) 0.8 - 1.5 mm (NS500) 8.8m²/l (=200g/l if mixed in) 4.4m²/l (=400g/l if mixed in) NS200, NS300, NS500 1 kg, 15 kg
For use on: Metal, wood, concrete, tile, parquet Coverage: 2,5 m²/aerosol. Finish: Satin Recoatable (at 20˚C): 1 hr Touch dry (at 20˚C): After 20 min. Application: Aerosol Product code: 2410, 2444, 2479 Pack sizes: 2 kg
27
INSTANT WATERPROOFING
NEW
Dark Grey
SEALS LEAKS QUICKLY
EVEN IN BAD WEATHER! • Immediate waterproofing of roofs and gutters • Can be applied in all weather conditions • For bitumen, PVC, metal, tiles, glass • Remains flexible in hot and cold weather • Also ideal as a primer for roof coatings
INSTANT WATERPROOFING
CONVENIENT ALL-IN-ONE KIT • Can Can of of FILLCOAT FILLCOAT®® FIBRES FIBRES • Brush Brush Crack bridging bridging fleece fleece • Crack Gloves • Gloves Sanding block block • Sanding Instruction sheet sheet • Instruction
C ra
ck bridging
Suitable for:
Gutters
Glass
Hard PVC
WATCH THE VIDEO available colours
Scan the code with your phone or check it online: www.rust-oleum.eu/fillcoat-fibres
Technical info For use on: Bituminous substrates, metal, hard PVC, polyester, glass Coverage: 1m²/l.atat430 1m²/l 430µm µmdry dry Touch dry (at 20˚C): 4 hrs Recoatable (at 20˚C): 3-14 days Application: Brush Product code: PL 26 26.LGR 26.DGR, Pack sizes: 1l, 5l, 20l, repair kit
Light Grey
Dark Grey
Black
Minor differences between printed and supplied colours are possible due to printing limitations. Fillcoat® Fibres is not available in black and the repair kit is only supplied in dark grey. Minor differences between printed and supplied colours are possible due to printing limitations.
28
29
INSTANT WATERPROOFING
NEW
Dark Grey
SEALS LEAKS QUICKLY
EVEN IN BAD WEATHER! • Immediate waterproofing of roofs and gutters • Can be applied in all weather conditions • For bitumen, PVC, metal, tiles, glass • Remains flexible in hot and cold weather • Also ideal as a primer for roof coatings
INSTANT WATERPROOFING
CONVENIENT ALL-IN-ONE KIT • Can Can of of FILLCOAT FILLCOAT®® FIBRES FIBRES • Brush Brush Crack bridging bridging fleece fleece • Crack Gloves • Gloves Sanding block block • Sanding Instruction sheet sheet • Instruction
C ra
ck bridging
Suitable for:
Gutters
Glass
Hard PVC
WATCH THE VIDEO available colours
Scan the code with your phone or check it online: www.rust-oleum.eu/fillcoat-fibres
Technical info For use on: Bituminous substrates, metal, hard PVC, polyester, glass Coverage: 1m²/l.atat430 1m²/l 430µm µmdry dry Touch dry (at 20˚C): 4 hrs Recoatable (at 20˚C): 3-14 days Application: Brush Product code: PL 26 26.LGR 26.DGR, Pack sizes: 1l, 5l, 20l, repair kit
Light Grey
Dark Grey
Black
Minor differences between printed and supplied colours are possible due to printing limitations. Fillcoat® Fibres is not available in black and the repair kit is only supplied in dark grey. Minor differences between printed and supplied colours are possible due to printing limitations.
28
29
waterproofing exterior wall paint
WATERPROOFING AEROSOL
Clear 3410
Black 3478
MURFILL®
FLEXIBLE SEAL TO FILL AND SEAL
• 100% Very durable waterproof and UV-resistant, coating colour and gloss retention • 400% Very easy elastic; to clean protects (alsoinwith any chemicals) weather • Water Very low vapour odour, permeable can be used indoors • Water-based High abrasionformulation resistance, low wear • Protects Flexible and reinforced impact concrete resistant against carbonisation
• Thermally Seals leaks split andflint cracks stone granules provide a durable • Watertight anti-slip finish semi smooth finish • Choice Can be between top-coated small with granules latex or(NS200) oil-based paints • Can Paintable be mixed finish into coating or broadcast over the final
WATERPROOFING COATING
LEAKS & CRACKS
(wet) finish
and corrosion Suitable for:
Walls
Concrete
Metal Old paintwork
Technical info For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
30
Suitable for:
Metal
Aluminium Floors
Concrete
PVC
Technical info Walls/facades, existing sound paint 3.3m²/l at 145 µm dry, 1m²/l with fleece 45 min. 24 hrs Brush, roller, airless 9.XX 1 kg, 6 kg, 15 kg, 25 kg (1kg & 25kg only white)
For use on: Metal, aluminum, PVC, concrete, masonry, asphalt roofing materials, etc. (Dry surfaces) Coverage: 0,74 m²/can Recoatable (at 20˚C): Second layer: 15-30 min. Topcoat: after 24 hrs Application: Aerosol 3410 (clear), 3478 (black) Product code: Pack sizes: 500 ml
31
waterproofing exterior wall paint
WATERPROOFING AEROSOL
Clear 3410
Black 3478
MURFILL®
FLEXIBLE SEAL TO FILL AND SEAL
• 100% Very durable waterproof and UV-resistant, coating colour and gloss retention • 400% Very easy elastic; to clean protects (alsoinwith any chemicals) weather • Water Very low vapour odour, permeable can be used indoors • Water-based High abrasionformulation resistance, low wear • Protects Flexible and reinforced impact concrete resistant against carbonisation
• Thermally Seals leaks split andflint cracks stone granules provide a durable • Watertight anti-slip finish semi smooth finish • Choice Can be between top-coated small with granules latex or(NS200) oil-based paints • Can Paintable be mixed finish into coating or broadcast over the final
WATERPROOFING COATING
LEAKS & CRACKS
(wet) finish
and corrosion Suitable for:
Walls
Concrete
Metal Old paintwork
Technical info For use on: Coverage: Touch dry (at 20˚C): Recoatable (at 20˚C): Application: Product code: Pack sizes:
30
Suitable for:
Metal
Aluminium Floors
Concrete
PVC
Technical info Walls/facades, existing sound paint 3.3m²/l at 145 µm dry, 1m²/l with fleece 45 min. 24 hrs Brush, roller, airless 9.XX 1 kg, 6 kg, 15 kg, 25 kg (1kg & 25kg only white)
For use on: Metal, aluminum, PVC, concrete, masonry, asphalt roofing materials, etc. (Dry surfaces) Coverage: 0,74 m²/can Recoatable (at 20˚C): Second layer: 15-30 min. Topcoat: after 24 hrs Application: Aerosol 3410 (clear), 3478 (black) Product code: Pack sizes: 500 ml
31
LUBRICATION
Paint stripper
Better for you, better for the environment!
MULTI-PURPOSE SPRAY
THE NR. 1
protects & CLEANS • Stops squeaking • Creeping properties • Displaces water • Does not contain silicon • Dissolves grease, tar, oil and some
GREEN PAINT STRIPPER
TI AN
CORROSIVE
P EN
ETRATING
adhesives
• Far more effective than other green paint strippers* • Quick-acting • Contains no methylene chloride • Gel like paste also works at low temperatures (< 0 °C) • Also effective as glue remover * Effectiveness and application time depends on the amount of paint stripper applied and the age and layer thickness of the coating to be removed.
Suitable for:
Cables
Switches
Suitable for:
Locks
RICATING L UB
Paints
Coatings
Technical info
Technical info TECTING PRO
To use for: Lubricating cables, chains, locks,switches and contacts Food grade certified: H1 Temperature range: -30 °C to +145 °C Application: Aerosol Product code: 1610 Pack sizes: 500ml
32
CLEANING
For use on: Coatings/paint on mineral, wooden and metal substrates Coverage: 2-4 m²/l Appearance: Clear, thixotropic layer Formulation: Special blend of solvents and paraffin wax Application: Brush or aerosol and filling knife or paint scraper Product code: 2925, 25.0.75, 25.2.5 Pack sizes: 750ml, 2.5l, 500ml
33
LUBRICATION
Paint stripper
Better for you, better for the environment!
MULTI-PURPOSE SPRAY
THE NR. 1
protects & CLEANS • Stops squeaking • Creeping properties • Displaces water • Does not contain silicon • Dissolves grease, tar, oil and some
GREEN PAINT STRIPPER
TI AN
CORROSIVE
P EN
ETRATING
adhesives
• Far more effective than other green paint strippers* • Quick-acting • Contains no methylene chloride • Gel like paste also works at low temperatures (< 0 °C) • Also effective as glue remover * Effectiveness and application time depends on the amount of paint stripper applied and the age and layer thickness of the coating to be removed.
Suitable for:
Cables
Switches
Suitable for:
Locks
RICATING L UB
Paints
Coatings
Technical info
Technical info TECTING PRO
To use for: Lubricating cables, chains, locks,switches and contacts Food grade certified: H1 Temperature range: -30 °C to +145 °C Application: Aerosol Product code: 1610 Pack sizes: 500ml
32
CLEANING
For use on: Coatings/paint on mineral, wooden and metal substrates Coverage: 2-4 m²/l Appearance: Clear, thixotropic layer Formulation: Special blend of solvents and paraffin wax Application: Brush or aerosol and filling knife or paint scraper Product code: 2925, 25.0.75, 25.2.5 Pack sizes: 750ml, 2.5l, 500ml
33
ETCHING SOLUTION
ALKALINE CLEANER/DEGREASER
EFFECTIVE
effective
• Improves the adhesion of coating systems • Neutralizes alkaline salts • Also ideal to remove ´white rust´ from metal • No objectionable odour or fumes • Non-flammable
• Removes grease, oil, proteins, dirt and many other
ETCHING SOLUTION
CLEANER & DEGREASER contaminants from coated, mineral and steel substrates • Use as additive for high pressure cleaning • Low concentration is sufficient (3-5%) • Non-flammable, virtually odour-free
Suitable for:
Smooth concrete
Galvanised steel
Suitable for:
Aluminium
Coated, mineral and metal substrates
Technical info
Technical info
For use on: Smooth concrete surfaces, masonry, galvanised steel and aluminum Coverage: 6-8m²/l Appearance: Red fluid PH: 1 Application: Nylon brush or broom Product code: 108 Pack sizes: 5l
For use on: Coated, mineral and metal substrates Coverage: 100m²/l (using 1:20 dilution) Dilution: 1 : 20 (5%) Recoatable with: All Rust-Oleum® or Mathys® primers and coatings Application: Sponge, cloth, brush or broom Product code: ND14 Pack sizes: 5l
34
35
ETCHING SOLUTION
ALKALINE CLEANER/DEGREASER
EFFECTIVE
effective
• Improves the adhesion of coating systems • Neutralizes alkaline salts • Also ideal to remove ´white rust´ from metal • No objectionable odour or fumes • Non-flammable
• Removes grease, oil, proteins, dirt and many other
ETCHING SOLUTION
CLEANER & DEGREASER contaminants from coated, mineral and steel substrates • Use as additive for high pressure cleaning • Low concentration is sufficient (3-5%) • Non-flammable, virtually odour-free
Suitable for:
Smooth concrete
Galvanised steel
Suitable for:
Aluminium
Coated, mineral and metal substrates
Technical info
Technical info
For use on: Smooth concrete surfaces, masonry, galvanised steel and aluminum Coverage: 6-8m²/l Appearance: Red fluid PH: 1 Application: Nylon brush or broom Product code: 108 Pack sizes: 5l
For use on: Coated, mineral and metal substrates Coverage: 100m²/l (using 1:20 dilution) Dilution: 1 : 20 (5%) Recoatable with: All Rust-Oleum® or Mathys® primers and coatings Application: Sponge, cloth, brush or broom Product code: ND14 Pack sizes: 5l
34
35
INDUSTRIAL
PRODUCT GUIDE Your Rust-Oleum® distributor:
UK: (0)2476 717 329 Call 0845+44 504 5040 or e-mail pc@brewers.co.uk EU:
+32 (0)13 460 200
Free expert help & advice with high performance paints and protective coatings.
/RustOleumEU
/RustOleumEU
RUST-OLEUM® -products are manufactured by Rust-Oleum Europe under license from Rust-Oleum International, USA. ® is a PEGACRETE registered trademark are registered of Rust-Oleum trademarks Europe. of Rust-Oleum The guidelines Europe. in The this guidelines brochure are in this provided brochure for RUST-OLEUM® and are information providedpurposes for information only. Since purposes the manufacturer only. Sinceisthe unable manufacturer to exerciseisany unable controltoover exercise the correct any control application over and the correct processing application of the products, and processing he cannot of the accept products, any responsibility he cannot accept for this. any©responsibility Copyright 2015 for this. Rust-Oleum © Copyright Europe. 2015 All Rust-Oleum rights reserved. Europe. The images All rightsshown reserved. in this Thecatalogue images shown may differ in this from catalogue the actual may product. differ from the actual product.
Rust-Oleum UKUK Ltd. P.O. Box 261 Rust-Oleum Europe Kolenbergstraat 23, 3545 Zelem, Belgium Rust-Oleum Ltd. 460 200 |F: T:+44 +32 (0)13 460 201717 329 Chester-le-Street DH3 9EH United Kingdom P.O. Box 261 Chester-le-Street DH3 9EH T:+32 United(0)13 Kingdom (0)2476 info@rust-oleum.eu T:+44 (0)2476 717 329 | www.rust-oleum.eu info@rust-oleum.eu info@rust-oleum.eu ® ® KNOW-HOW KNOW-HOW TOTO PROTECT PROTECT
MXXX.GB VXXX.GB -- 06.15 08.15
@RustOleumEU