Anton Paar launches Liqueur Analyzing System

Anton Paar has launched a modular, versatile Liqueur Analyzing System that measures all relevant QC parameters in a single measuring cycle – covering a wide array of samples, from distillates to liqueur with high sugar content.

Measurements are rated up to 10x quicker than with classic distillation No product-specific calibration is necessary, and neither is initial setup of a calibration database and reference analysis The Analyzing System determines alcohol and total extract, and can be extended with additional modules to measure colour, turbidity, or pH. The density meter’s FillingCheck™ automatically detects filling errors, such as bubbles in the sample, in real time, alerts the user, and documents the incident

The sweeter, the better: Adding an MCP 100 polarimeter to the system allows analysis of liqueurs with sugar content higher than 20 g/L An algorithm eliminates the impact of saccharose and invert sugar on the NIR alcohol analysis and allows the estimation of the concentration of these types of sugars in the sample info.uk@anton-paar.com

Users can separate media hygienically and securely with AWH Leakage Butterfly Valves - ideal for safety critical, positive separation of hazardous materials, such as CIP Fluids and Product, says Neumo.

The AWH Leakage Butterfly Valve has a large internal chamber to securely separate media, which comes as standard with a leakage / drain valve and a rinse valve, also referred to as auxiliary valves These auxiliary valves can be actuated pneumatically separately, or at the same time

Both valves are designed to be easy to clean and fully isolated when closed. Since the valve piston is virtually flush with the flow tube, this area cannot become soiled The Butterfly Valves use Neumo’s tried and tested hygienic design The valve itself comes with the tried and tested AWH standard Butterfly

Valve Disks, Seals and Actuators for maximum compatibility with standard spare parts

The actuator and auxiliary valves can be equipped with sensors to monitor the individual valve positions Integrated mounting for Position Sensors can be specified or dedicated Control Tops from Neumo’s VMon II range are also available.

The "Double-Valve principle" offers the greatest safety when working with different media in the same system The intermediate flange design makes installation easy during assembly and maintenance

Scan the QR code (right) to see the (1702) AWH Maintenance Leakage Butterfly Valve pneumatic in action. www.neumo.co.uk