2010 BUYER'S GUIDE
Network Cabling Products
www.accu-tech.com
NetClear solutions from Berk-Tek, a Nexans Company, and Legrand | Ortronics are a complete set of end-to-end cabling systems comprised of high-performance fiber and copper cabling and connectivity, backed by a 25-year warranty. But, it’s more than just a defined cable channel. NetClear solutions go beyond the terminations to encompass all physical support products to provide a total solution for all markets — enterprise/LAN, government, healthcare, education, data centers and security. Working together, NetClear solutions deliver reliability, value, flexibility and promised performance to every network.
Berk-Tek, a Nexans Company Berk-Tek offers over 100 different constructions of fiber optic and copper cable products for all facets of voice, video and data applications. Because your business runs through us, Berk-Tek cables are built to guarantee reliability through the tests of time and emerging applications in LAN, MAN or WAN environments for the long haul or short connections.
Legrand | Ortronics Legrand | Ortronics is a global leader in high performance network infrastructure solutions, offering a complete range of Category 5e, 6 and 10 Gig copper, fiber optic, and residential/MDU connectivity solutions, as well as Layer Zero physical support solutions including Cablofil® wire mesh cable tray and Wiremold® pathways.
TABLE OF NETCLEAR COPPER SOLUTIONS
NetClear Structured Cabling Solutions: It Simply Works Better
NETCLEAR FIBER SOLUTIONS
STRUCTURED CABLING
PHYSICAL INFRASTRUCTURE SOLUTIONS
INTRODUCTION
NetClear
®
Contents 1 | UTP Solutions
2
NetClear® GTX — Category 6A UTP Solutions
3
NetClear GT3 — Premium Category 6 Solutions
5
NetClear GT2 — Enhanced Category 6 Solutions
7
NetClear GT — Enhanced Category 5e Solutions
9
2 | FTP (Shielded) Solutions
11
NetClear GTS — Shielded Category 6 Solutions
11
NetClear MM10 — 50 Micron Multimode – OM3 & OM4
14
NetClear MM1 — 62.5 Micron Multimode – OM1 & OM2
19
NetClear SM — Single-mode
22
Mighty Mo® Network and Server Cabinets
25
Pre-Configured Server Cabinets
25
Pre-Configured Network Cabinets
25
Mighty Mo Advanced Cable Management Systems
26
Wiremold® Pathways
27
Cablofil® Wire Mesh Cable Tray and Accessories
36
1
COPPER SOLUTIONS
NetClear
NetClear® GTX Category 6A UTP Solution
®
STRUCTURED CABLING
NetClear® Copper Solutions NetClear copper solutions give you a choice of UTP or FTP for Category 5e, Category 6 and Category 6A for speeds up to 10 Gb/s. NetClear copper solutions are comprised of high-performance copper cabling, connectivity, and physical support products to provide the reliability to give customers peace of mind. NetClear cabling systems provide extraordinary headroom for distances beyond industry standards.
THE TWO PRODUCT GROUPS FOR COPPER SOLUTIONS INCLUDE: NetClear UTP Solutions – From standards’ compliant Category 5e to our premier NetClear GTX solution incorporating Category 6A, our UTP solutions provide full-channel reliability, backed by independent lab testing, for both dynamic and static performance. As network speeds and standards span from 100 Mb/s to 10 Gb/s, there is a NetClear solution to suit today and tomorrow’s data, voice and video applications. NetClear FTP Solutions – Where there is added noise or additional signal security is needed, rely on FTP cable solutions from Berk-Tek and Legrand | Ortronics. These solutions provide cable and connectivity that together virtually eliminate both nearand far-end alien crosstalk to provide a signal-to-noise ratio and channel capacity far above those that can be accomplished with an UTP system.
The NetClear GTX Category 6A UTP copper cabling system provides full channel 10 Gigabit Ethernet performance without compromise. With LANmark®-10G2, the world’s first 10G UTP cable to be independently tested for both alien near- and far-end crosstalk, center-tuned Clarity 10G patch cords and Clarity 10G TracJacks with tactical isolation, you get a cost-effective 10 Gigabit Ethernet solution out to a full 100 meters. We meet IEEE 10G-Base-T and TIA Category 6A standards, including specifications for alien crosstalk, with headroom to spare. As a result, NetClear GTX delivers real-world performance from end-to-end. While GTX requires field testing for all Category 6A internal noise parameters, due to the robust design of the NetClear GTX cabling system, alien crosstalk testing is not required to qualify for the 25-year 10G application warranty.
NETCLEAR GTX CHANNEL GUARANTEES NETCLEAR GTX CHANNEL GUARANTEES* Frequency (MHz)
INSERTION LOSS (dB)
NEXT (dB)
PSNEXT (dB)
ACRF (dB)
PSACRF (dB)
PSANEXT (dB)
PSAACRF (dB)
RETURN LOSS (dB)
1
2.3
65.0
62.0
63.3
60.3
67.0
67.0
19.0
4
4.2
63.0
60.5
51.2
48.2
67.0
65.0
19.0
8
5.8
58.2
55.6
45.2
42.2
67.0
58.9
19.0
10
6.5
56.6
54.0
43.3
40.3
67.0
57.0
19.0
16
8.2
53.2
50.6
39.2
36.2
67.0
52.9
18.0
20
9.2
51.6
49.0
37.2
34.2
67.0
51.0
17.5
25
10.2
50.0
47.3
35.3
32.3
66.0
49.0
17.0
31.25
11.5
48.4
45.7
33.4
30.4
65.1
47.1
16.5
62.5
16.4
43.4
40.6
27.3
24.3
62.0
41.1
14.0
100
20.9
39.9
37.1
23.3
20.3
60.0
37.0
12.0
200
30.1
34.8
31.9
17.2
14.2
55.5
31.0
9.0
250
33.9
33.1
30.2
15.3
12.3
54.0
29.0
8.0
300
37.4
31.7
28.8
13.7
10.7
52.8
27.5
7.2
400
43.7
28.7
25.8
11.2
8.2
51.0
25.0
6.0
500
49.3
26.1
23.2
9.3
6.3
49.5
23.0
6.0
• Performance compliant with ANSI/TIA-568-C.2
2
3
NETCLEAR GTX ORDERING INFORMATION
NetClear® GT3 Premium Category 6 Solutions
Ortronics® Clarity® Cat6A/10G UTP Components MODULAR JACKS DESCRIPTION
COLOR
PART NO.
TracJack®, Clarity Cat6A/10G, 180˚ exit, T568A/B wiring
Fog White
OR-TJ610
Panel Jack, Clarity Cat6A/10G, 180˚ exit, T568A/B wiring
Black
PJ6A00-00
The NetClear GT3 horizontal channel solution is engineered to provide lab-verified channel performance with bandwidth speeds beyond 400 MHz. NetClear GT3 verifies channel performance 8 dB above all Category 6 crosstalk requirements and 6 dB above all Category 6 return loss requirements for standards-compliant designs/installations.
Clarity 10G TracJacks are available in these additional colors: -00 for black, –36 for blue, -42 for red, -43 for orange, -44 for yellow, -45 for green, -68 for wiremold gray, -88 for cloud white, -99 for wiremold ivory. To order add tailcode to end of part number. Clarity Panel Jacks are available in these additional colors: –36 for blue, -42 for red, -43 for orange, -44 for yellow, -45 for green. To order add tailcode to end of part number.
NETCLEAR GT3 CHANNEL GUARANTEES
PATCH PANELS DESCRIPTION
PORTS
PART NO.
Angled, Clarity Cat6A/10G patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHA610U24
Angled, Clarity Cat6A/10G patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHA610U48
Flat, Clarity Cat6A/10G patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHD610U24
Flat, Clarity Cat6A/10G patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHD610U48
INDIVIDUAL JACK PANELS (UNLOADED, USE WITH PJ6A00 JACKS) DESCRIPTION
PORTS
Angled, panel jack panel kit, unloaded, 1.75” X 19” (1RU)
24
Frequency (MHz)
TIA CAT 6 Insertion Loss (dB/100m)
Guaranteed NetClear GT3 Insertion Loss (dB/100m)
TIA CAT 6 NEXT (dB)
Guaranteed NetClear GT3 NEXT (dB)
TIA CAT 6 PSNEXT (dB)
Guaranteed NetClear GT3 PSNEXT (dB)
TIA CAT 6 ACRF (dB)
Guaranteed NetClear GT3 ACRF (dB)
TIA CAT 6 PSACRF (dB)
Guaranteed NetClear GT3 PSACRF (dB)
TIA CAT 6 Return Loss (dB)
Guaranteed NetClear GT3 Return Loss (dB)
1.0
2.1
2.1
65.0
73.0
62.0
70.0
63.3
71.3
60.3
68.3
19.0
25.0
4.0
4.0
3.9
63.0
71.0
60.5
68.5
51.2
59.2
48.2
56.2
19.0
25.0
10.0
6.3
6.1
56.6
64.6
54.0
62.0
43.3
51.3
40.3
48.3
19.0
25.0
20.0
9.0
8.6
51.6
59.6
49.0
57.0
37.2
45.2
34.2
42.2
17.5
23.5
31.25
11.4
10.7
48.4
56.4
45.7
53.7
33.4
41.4
30.4
38.4
16.5
22.5
62.5
16.5
15.3
43.4
51.4
40.6
48.6
27.3
35.3
24.3
32.3
14.0
20.0
PART NO.
100.0
21.3
19.5
39.9
47.9
37.1
45.1
23.3
31.3
20.3
28.3
12.0
18.0
OR-PHAPJU24
155.0
27.2
24.5
36.7
44.7
33.8
41.8
19.5
27.5
16.5
24.5
10.1
16.1
200.0
31.5
28.1
34.8
42.8
31.9
39.9
17.2
25.2
14.2
22.2
9.0
15.0
250.0
36.0
31.7
33.1
41.1
30.2
38.2
15.3
23.3
12.3
20.3
8.0
14.0
Angled, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
48
OR-PHAPJU48
Angled, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
72
OR-PHAPJU72
Flat, panel jack panel kit, unloaded, 1.75” X 19” (1RU)
24
OR-PHDPJU24
Flat, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
48
OR-PHDPJU48
Flat, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
72
OR-PHDPJU72
Ortronics® Clarity® 6 UTP Components PATCH CORDS
MODULAR JACKS
DESCRIPTION
PART NO.
DESCRIPTION
4-Pair, Clarity Cat6A/10G
OR-MC610XX-YY
TracJack®, Clarity 6, 180˚ exit, T568A/B wiring (Fog White)
–
OR-TJ600
Series II®, Clarity 6, 180˚ exit, T568A/B wiring
1
OR-S21600
Series II, Clarity 6, 180˚ exit, T568A/B wiring
2
OR-S22600
XX = length in feet up to 25ft YY = color: -02 for red, -03 for orange, -04 for yellow, -05 for green, -06 for blue, -08 for gray, -09 for white.
Panel Jack, Clarity 6, 180˚ exit, T568A/B wiring (Black)
Berk-Tek Cable
PART NO.
PJ600-00
Clarity 6 TracJacks are available in these additional colors: -00 for black, –36 for blue, -42 for red, -43 for orange, -44 for yellow, -45 for green, -68 for wiremold gray, -88 for cloud white, -99 for wiremold ivory. To order add tailcode to end of part number.
LANMARK-10G2 4-PAIR UTP CABLE, CMP PLENUM RATED DESCRIPTION
PACKAGING PART NO.
Gray
1000’ Reel
10137183
Yellow
1000’ Reel
10137385
Blue
1000’ Reel
10130484
Clarity 6 Series II modules are available in these additional colors: -99 for wiremold ivory, -88 for cloud white, -00 for black. To order add tailcode to end of part number. Clarity 6 panel jacks are available in these additional colors: –36 for blue, -42 for red, -43 for orange, -44 for yellow, -45 for green. To order add tailcode to end of part number.
PATCH PANELS: CLARITY HIGH DENSITY WITH SIX-PORT MODULES DESCRIPTION
LANMARK-10G2 4-PAIR UTP CABLE, CMR RISER RATED
4
PORTS
PORTS
PART NO.
Angled, Clarity 6 patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHA66U24
Angled, Clarity 6 patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHA66U48
10137701
Flat, Clarity 6 patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHD66U24
48
OR-PHD66U48
96
OR-PHD66U96
DESCRIPTION
PACKAGING PART NO.
Gray
1000’ Reel
Yellow
1000’ Reel
10137706
Flat, Clarity 6 patch panel, T568A/B, 3.5” X 19” (2RU)
Blue
1000’ Reel
10137700
Flat, Clarity 6 patch panel, T568A/B, 7.0” X 19” (4RU)
5
NETCLEAR GT3 ORDERING INFORMATION
NetClear® GT2 Enhanced Category 6 Solutions
PATCH PANELS: CLARITY HIGH DENSITY WITH EIGHT-PORT MODULES DESCRIPTION
PORTS
PART NO.
Flat, Clarity 6 patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHD68U24
Flat, Clarity 6 patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHD68U48
Flat, Clarity 6 patch panel, T568A/B, 7.0” X 19” (4RU)
96
OR-PHD68U96
NetClear GT2 horizontal channel solution provides a total usable bandwidth of 250 MHz. NetClear GT2 is guaranteed to deliver verified channel performance of 5 dB better than all Category 6 crosstalk and 3 dB return loss requirements for standards-compliant installations.
INDIVIDUAL JACK PANELS (UNLOADED, USE WITH PJ600 JACKS) DESCRIPTION
PORTS
PART NO.
Angled, panel jack panel kit, unloaded, 1.75” X 19” (1RU)
24
OR-PHAPJU24
Angled, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
48
OR-PHAPJU48
Angled, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
72
OR-PHAPJU72
Flat, panel jack panel kit, unloaded, 1.75” X 19” (1RU)
24
OR-PHDPJU24
Flat, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
48
Flat, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
72
Frequency (MHz)
TIA CAT 6 Insertion Loss (dB/100m)
Guaranteed NetClear GT2 Insertion Loss (dB/100m)
TIA CAT 6 NEXT (dB)
Guaranteed NetClear GT2 NEXT (dB)
TIA CAT 6 PSNEXT (dB)
Guaranteed NetClear GT2 PSNEXT (dB)
TIA CAT 6 ACRF (dB)
Guaranteed NetClear GT2 ACRF (dB)
TIA CAT 6 PSACRF (dB)
Guaranteed NetClear GT2 PSACRF (dB)
TIA CAT 6 Return Loss (dB)
Guaranteed NetClear GT2 Return Loss (dB)
OR-PHDPJU48
1.0
2.1
2.1
65.0
70.0
62.0
67.0
63.3
68.3
60.3
65.3
19.0
22.0
OR-PHDPJU72
4.0
4.0
4.0
63.0
68.0
60.5
65.5
51.2
56.2
48.2
53.2
19.0
22.0
10.0
6.3
6.3
56.6
61.6
54.0
59.0
43.3
48.3
40.3
45.3
19.0
22.0
PATCH CORDS DESCRIPTION 4-Pair, Clarity Cat6
NETCLEAR GT2 CHANNEL GUARANTEES
20.0
9.0
9.0
51.6
56.6
49.0
54.0
37.2
42.2
34.2
39.2
17.5
20.5
31.25
11.4
11.3
48.4
53.4
45.7
50.7
33.4
38.4
30.4
35.4
16.5
19.5
PART NO.
62.5
16.5
16.4
43.4
48.4
40.6
45.6
27.3
32.3
24.3
29.3
14.0
17.0
OR-MC6XX-YY
100.0
21.3
21.2
39.9
44.9
37.1
42.1
23.3
28.3
20.3
25.3
12.0
15.0
155.0
27.2
27.1
36.7
41.7
33.8
38.8
19.5
24.5
16.5
21.5
10.1
13.1
200.0
31.5
31.3
34.8
39.8
31.9
36.9
17.2
22.2
14.2
19.2
9.0
12.0
250.0
36.0
35.7
33.1
38.1
30.2
35.2
15.3
20.3
12.3
17.3
8.0
11.0
XX = length in feet up to 25ft YY = color: -00 for black, -02 for red, -03 for orange, -04 for yellow, -05 for green, -06 for blue, -08 for gray, -09 for white
Berk-Tek Cable LANMARK-2000 4-PAIR PREMIUM CATEGORY 6 UTP CABLE, CMP PLENUM RATED DESCRIPTION
PACKAGING PART NO.
Gray
Reel in a box
10167307
White
Reel in a box
10167312
Blue
Reel in a box
10163780
LANMARK-2000 4-PAIR PREMIUM CATEGORY 6 UTP CABLE, CMR RISER RATED DESCRIPTION
PACKAGING PART NO.
Gray
Reel in a box
10167479
White
Reel in a box
10167478
Blue
Reel in a box
10167477
Ortronics® Clarity® 6 UTP Components MODULAR JACKS DESCRIPTION
PORTS
PART NO.
TracJack®, Clarity 6, 180˚ exit, T568A/B wiring (Fog White)
–
OR-TJ600
Series II®, Clarity 6, 180˚ exit, T568A/B wiring
1
OR-S21600
Series II, Clarity 6, 180˚ exit, T568A/B wiring
2
OR-S22600
Panel Jack, Clarity 6, 180˚ exit, T568A/B wiring (Black)
PJ600-00
Clarity 6 TracJacks are available in these additional colors: -00 for black, –36 for blue, -42 for red, -43 for orange, -44 for yellow, -45 for green, -68 for wiremold gray, -88 for cloud white, -99 for wiremold ivory. To order add tailcode to end of part number. Clarity 6 Series II modules are available in these additional colors: -99 for wiremold ivory, -88 for cloud white, -00 for black. To order add tailcode to end of part number. Clarity 6 panel jacks are available in these additional colors: –36 for blue, -42 for red, -43 for orange, -44 for yellow, -45 for green. To order add tailcode to end of part number.
PATCH PANELS: CLARITY HIGH DENSITY WITH SIX-PORT MODULES DESCRIPTION
6
PORTS
PART NO.
Angled, Clarity 6 patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHA66U24
Angled, Clarity 6 patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHA66U48
Flat, Clarity 6 patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHD66U24
Flat, Clarity 6 patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHD66U48
Flat, Clarity 6 patch panel, T568A/B, 7.0” X 19” (4RU)
96
OR-PHD66U96
7
NETCLEAR GT2 ORDERING INFORMATION
NetClear® GT Enhanced Category 5e Solutions
PATCH PANELS: CLARITY HIGH DENSITY WITH EIGHT-PORT MODULES DESCRIPTION
PORTS
PART NO.
Flat, Clarity 6 patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHD68U24
Flat, Clarity 6 patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHD68U48
Flat, Clarity 6 patch panel, T568A/B, 7.0” X 19” (4RU)
96
OR-PHD68U96
NetClear GT horizontal channel solutions are engineered to provide a total bandwidth of 155 MHz. Ideal for voice and data applications to 1 Gigabit Ethernet, NetClear GT has a verified channel performance of 6 dB above all Category 5e crosstalk requirements and 3 dB above all Category 5e return loss requirements for standardscompliant designs/ installations.
INDIVIDUAL JACK PANELS (UNLOADED, USE WITH PJ600 JACKS) DESCRIPTION
PORTS
PART NO.
Angled, panel jack panel kit, unloaded, 1.75” X 19” (1RU)
24
OR-PHAPJU24
Angled, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
48
OR-PHAPJU48
Angled, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
72
OR-PHAPJU72
Flat, panel jack panel kit, unloaded, 1.75” X 19” (1RU)
24
OR-PHDPJU24
Flat, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
48
OR-PHDPJU48
Flat, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
72
OR-PHDPJU72
PATCH CORDS DESCRIPTION
PART NO.
4-Pair, Clarity Cat6
OR-MC6XX-YY
XX = length in feet up to 25ft YY = color: -00 for black, -02 for red, -04 for yellow, -05 for green, -06 for blue, -08 for gray, -09 for white.
NETCLEAR GT CHANNEL GUARANTEES Frequency (MHz)
TIA CAT 5e Insertion Loss (dB/100m)
Guaranteed NetClear GT Insertion Loss (dB/100m)
TIA CAT 5e NEXT (dB)
Guaranteed NetClear GT NEXT (dB)
TIA CAT 5e PSNEXT (dB)
Guaranteed NetClear GT PSNEXT (dB)
TIA CAT 5e ACRF (dB)
Guaranteed NetClear GT ACRF (dB)
TIA CAT 5e PSACRF (dB)
Guaranteed NetClear GT PSACRF (dB)
TIA CAT 5e Return Loss (dB)
Guaranteed NetClear GT Return Loss (dB)
1.0
2.2
2.1
60.0
66.0
57.0
63.0
57.4
63.4
54.4
60.4
17.0
20.0
4.0
4.5
4.0
53.5
59.5
50.5
56.5
45.4
51.4
42.4
48.4
17.0
20.0
10.0
7.1
6.3
47.0
53.0
44.0
50.0
37.4
43.4
34.4
40.4
17.0
20.0
NETCLEAR GT CHANNEL GUARANTEES
20.0
10.2
9.0
42.0
48.0
39.0
45.0
31.4
37.4
28.4
34.4
17.0
20.0
31.25
12.9
11.3
38.7
44.7
35.7
41.7
27.5
33.5
24.5
20.5
15.1
18.1
62.5
18.6
16.4
33.6
39.6
30.6
36.6
21.5
27.5
18.5
24.5
12.1
15.1
100.0
24.0
21.2
30.1
36.1
27.1
33.1
17.4
23.4
14.4
20.4
10.0
13.0
155.0
–
26.6
–
32.8
–
29.8
–
19.6
–
16.6
–
11.1
Berk-Tek Cable LANMARK-1000 4-PAIR ENHANCED CATEGORY 6 UTP CABLE, CMP PLENUM RATED DESCRIPTION
PACKAGING PART NO.
Ortronics® Clarity® 5E UTP Components
Gray
1000’ Tek Pak
10032026
White
1000’ Tek Pak
10032092
MODULAR JACKS
Blue
1000’ Tek Pak
10032094
DESCRIPTION
LANMARK-1000 4-PAIR ENHANCED CATEGORY 6 UTP CABLE, CMR RISER RATED DESCRIPTION
PACKAGING PART NO.
Gray
1000’ Tek Pak
10032452
White
1000’ Tek Pak
10032459
Blue
1000’ Tek Pak
10032680
PORTS
PART NO.
TracJack , Clarity 5E, 180˚ exit, T568A/B wiring (Fog White)
–
OR-TJ5E00
Series II®, Clarity 5E, 180˚ exit, T568A/B wiring
1
OR-S215E00
Series II, Clarity 5E, 180˚ exit, T568A/B wiring
2
®
Panel Jack, Clarity 5E, 180˚ exit, T568A/B wiring (Black)
OR-S225E00 PJ5E00-00
Clarity 6 TracJacks are available in these additional colors: -00 for black, –36 for blue, -42 for red, -43 for orange, -44 for yellow, -45 for green, -68 for wiremold gray, -88 for cloud white, -99 for wiremold ivory. To order add tailcode to end of part number. Clarity 6 Series II modules are available in these additional colors: -99 for wiremold ivory, -88 for cloud white, -00 for black. To order add tailcode to end of part number. Clarity 6 panel jacks are available in these additional colors: –36 for blue, -42 for red, -43 for orange, -44 for yellow, -45 for green. To order add tailcode to end of part number.
PATCH PANELS: CLARITY HIGH DENSITY WITH SIX-PORT MODULES DESCRIPTION
8
PORTS
PART NO.
Angled, Clarity 5E patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHA5E6U24
Angled, Clarity 5E patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHA5E6U48
Flat, Clarity 5E patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHD5E6U24
Flat, Clarity 5E patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHD5E6U48
Flat, Clarity 5E patch panel, T568A/B, 7.0” X 19” (4RU)
96
OR-PHD5E6U96
9
NETCLEAR GT ORDERING INFORMATION
NetClear® GTS 10 Gigabit FTP Soulutions
PATCH PANELS: CLARITY HIGH DENSITY WITH EIGHT-PORT MODULES DESCRIPTION
PORTS
PART NO.
Flat, Clarity 5E patch panel, T568A/B, 1.75” X 19” (1RU)
24
OR-PHD5E8U24
Flat, Clarity 5E patch panel, T568A/B, 3.5” X 19” (2RU)
48
OR-PHD5E8U48
Flat, Clarity 5E patch panel, T568A/B, 7.0” X 19” (4RU)
96
OR-PHD5E8U96
INDIVIDUAL JACK PANELS (UNLOADED, USE WITH PJ5E00 JACKS) DESCRIPTION
PORTS
PART NO.
Angled, panel jack panel kit, unloaded, 1.75” X 19” (1RU)
24
OR-PHAPJU24
Angled, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
48
OR-PHAPJU48
Angled, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
72
OR-PHAPJU72
Flat, panel jack panel kit, unloaded, 1.75” X 19” (1RU)
24
OR-PHDPJU24
Flat, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
48
OR-PHDPJU48
Flat, panel jack panel kit, unloaded, 3.5” X 19” (2RU)
72
OR-PHDPJU72
CLARITY 110 BLOCK KITS DESCRIPTION
USABLE PAIRS
PART NO.
100 Pairs (with legs)
96
OR-110ABC5E100
300 Pairs (with legs)
288
OR-110ABC5E300
PATCH CORDS DESCRIPTION
PART NO.
4-Pair, Clarity Cat5E
OR-MC5EXX-YY
XX = length in feet up to 25ft. YY = color: -00 for black, -02 for red, -04 for yellow, -05 for green, -06 for blue, -08 for gray, -09 for white.
Berk-Tek Cable LANMARK-350 4-PAIR PREMIUM CATEGORY 5E UTP CABLE, CMP PLENUM RATED DESCRIPTION
PACKAGING PART NO.
Gray
1000’ Tek Pak
10032079
White
1000’ Tek Pak
10032072
Blue
1000’ Tek Pak
10032065
NetClear shielded systems offer maximum noise reduction, especially needed for environments with extreme electrical interferences or in markets that require added security for network protection, such as financial and government institutions. Together Berk-Tek and Legrand | Ortronics offer both cable and connectivity for networks from 1 Gigabit Ethernet to 10 Gigabit and beyond, by offering complete solutions from standard Category 5e to high-performing Category 6A in shielded versions for the best signal-to-noise ratio performance. NETCLEAR® GTS The NetClear GTS system was the first system to offer full IEEE standards compliance and guaranteed 10 Gb/s support with the highest signal-to-noise ratio and virtually eliminates alien crosstalk. This system includes Berk-Tek’s LANmark-6 FTP, the first independently verified Category 6 F/UTP cable ideal for signal isolation and better cable balance.
NETCLEAR GTS CHANNEL GUARANTEES NETCLEAR GTS CHANNEL GUARANTEES Frequency (MHz)
IL (dB/100m)
NEXT (dB)
PSNEXT (dB)
ACRF (dB)
PSACRF (dB)
PSANEXT (dB)
PSAACRF (dB)
RETURN LOSS (dB)
1
2.1
72.7
70.3
63.3
60.3
67.0
67.0
19.0
4
4.0
63.0
60.5
51.2
48.2
67.0
65.0
19.0
8
5.7
58.2
55.6
45.2
42.2
67.0
58.9
19.0
10
6.3
56.6
54.0
43.3
40.3
67.0
57.0
19.0
16
8.0
53.2
50.6
39.2
36.2
67.0
52.9
18.0
20
9.0
51.6
49.0
37.2
34.2
67.0
51.0
17.5
31.25
11.4
48.4
45.7
33.4
30.4
67.0
47.1
16.5
62.5
16.5
43.4
40.6
27.3
24.3
64.0
41.1
14.0
100
21.3
39.9
37.1
23.3
20.3
62.0
37.0
12.0
200
31.5
34.8
31.9
17.2
14.2
57.5
31.0
9.0
250
35.9
33.1
30.2
15.3
12.3
56.0
29.0
8.0
400
46.9
28.7
25.8
11.2
8.2
53.0
25.0
6.0
500
53.4
26.1
23.2
9.3
6.3
51.5
23.0
6.0
LANMARK-350 4-PAIR ENHANCED CATEGORY 5E UTP CABLE, CMR RISER RATED
10
DESCRIPTION
PACKAGING PART NO.
Gray
1000’ Tek Pak
10043447
White
1000’ Tek Pak
10032434
Blue
1000’ Tek Pak
10032426
11
FIBER SOLUTIONS
NETCLEAR GTS ORDERING INFORMATION
Ortronics® Clarity® 6 FTP Components MODULAR JACK DESCRIPTION
PART NO.
TracJack®, Shielded, 180˚ exit, T568A/B wiring
OR-TJS600
NetClear
®
STRUCTURED CABLING
NetClear® Fiber Solutions PATCH PANEL DESCRIPTION
PART NO.
24-port, Clarity high density panel with shielded panel jacks, 1RU
OR-PHDPJS6A24
LANs use fiber optics primarily in the backbone, but more and more bandwidth hungry applications are requiring fiber to be used for horizontal, as well. Fiber’s extra distance capability combined with higher bandwidth requirements and its immunity to electrical interferences make fiber performance superior to copper cabling. Many factors must be considered when designing a fiber-optic cable plant. Each environment and application should be reviewed to decide upon the type of fiber, the number of fibers and termination options.
PATCH CORDS DESCRIPTION
PART NO.
FTP patch cord, gray, 3ft (gray)
OR-MCS603-08
FTP patch cord, gray, 5ft (gray)
OR-MCS605-08
FTP patch cord, gray, 7ft (gray)
OR-MCS607-08
FTP patch cord, gray, 9ft (gray)
OR-MCS609-08
FTP patch cord, gray, 15ft (gray)
OR-MCS615-08
FTP patch cord, gray, 20ft (gray)
OR-MCS620-08
FTP patch cord, gray, 25ft (gray)
OR-MCS625-08
Berk-Tek Cable LANMARK-6 4-PAIR CATEGORY 6 FTP CABLE, CMP PLENUM RATED DESCRIPTION
PACKAGING PART NO.
Gray
1000’ Reel
10057903
Yellow
1000’ Reel
10062608
Red
1000’ Reel
10063671
Together Berk-Tek and Legrand | Ortronics offer every fiber optic solution — from 62.5 micron multimode for OM1 applications to the highest laser-optimized OM4 fibers to long-distance single-mode. NetClear MM10 – utilizes Berk-Tek’s GIGAlite™-10 and GIGAlite™-10XB laser optimized 50 micron multimode fiber that supports the longest 1 Gigabit and 10 Gigabit link distances in the industry. NetClear MM1 – utilizes 62.5 micron and legacy 50 micron fiber to provide a cost-effective solution to support one Gigabit and 10 Gigabit Ethernet to 150 meters. NetClear SM – a high-performing single-mode fiber optic solution provides virtually unlimited information and signal carrying capacity to provide the longest life cycle for a structured cabling system investment.
LANMARK-6 4-PAIR CATEGORY 6 FTP CABLE, CMR RISER RATED
12
DESCRIPTION
PACKAGING PART NO.
Gray
1000’ Reel
10070439
Yellow
1000’ Reel
10090687
Red
1000’ Reel
10074211
TekLAB, an on-line tool, is designed to help you easily configure the exact pre-terminated cable assemblies using any Berk-Tek fiber optic cable and Legrand | Ortronics connectivity so that you can “build” your own assembly, create a schematic and generate data sheet. Pre-terminated cables offer lower installation costs, no cable preparation, no cable or connector scrap and no installer errors. Cable assemblies are fully tested, labeled and documented.
13
NETCLEAR MM10 ORDERING INFORMATION
NetClear® MM10 – 50 Micron Multimode — OM3 & OM4 NetClear MM10 fiber optic solutions offer exceptional performance at every level. NetClear MM10 fiber solution facilitates advanced network requirements for DC/SAN, horizontal, backbone and campus fiber solution systems for guaranteed performance and network longevity. Superior DMD of Berk-Tek’s GIGAlite10XB glass offers greater than 25% improvement of link loss budgets to support the maximum number of connections.
MOMENTUM® 3 CASSETTES (4900/500 MHz-km)* PART NO.
10G, 50/125 LC quad, 24 fiber, 2 MTP with pins**
1U
OR-M3LCQ24-50E
10G, 50/125 SC duplex, 12 fiber, 1 MTP with pins**
1U
OR-M3LCD12-50E
** Premium performance (low loss < 0.50) when used with premium performance patch cords and backbone cables.
OptiMo® FIELD-INSTALLABLE CONNECTORS DESCRIPTION
Legrand | Ortronics offers Momentum® pre-terminated cabling systems that integrate optical cassettes with advanced fiber cable in the backbone. Momentum 2 modular fiber optic pre-terminated cassettes provide the fastest method of structured cabling deployment. Factory-terminated and tested cassettes guarantee field performance to fully support today’s most rigorous transmission technologies up through 10 Gb/s. Momentum 3 modular fiber optic pre-terminated cassettes provide the same rapid deployment as Momentum 2 with a rugged metal housing that offers additional durability with an integral bend limiting spool feature to assure optimum optical performance. All cassettes are supported by a range of rack-mount and underfloor patch panels for convenient installation.
FIBER TYPE
HEIGHT
* The rugged metal housing of Momentum 3 offers additional durability with an integral bend limiting spool feature inside to assure optimum optical performance. The Momentum 3 Modular Pre-Terminated System is available in Premium Performance grades for 50 micron LC LOMF products only.
Included in this solution is Berk-Tek’s Micro Data center Plenum (MDP) cable, which was developed specifically with data centers in mind. The MDP cable is a high-density, smallest size optical cable, which is up to 50% smaller compared to typical loose tube cables and ribbon cables.
NETCLEAR MM10 DISTANCE GUARANTEES (in meters)
STYLE
STYLE
HEIGHT
PART NO.
No Epoxy/No Polish
SC
50/125
OR-205KAS9FA-50T
Zirconia Ferrule
LC
50/125
OR-205KAS9GA-50T
(for tight buffered cable)
Field Installation Kit
Pre-polished
OR-854B00000-1
Anaerobic Termination,
SC, multimode
Multimode
OR-205KAN9FA-MM
Zirconia Ferrule
LC, multimode
Multimode
OR-205KAN9GA-MM
(ideal for Adventum™ cable)
Field Installation Kit
Anaerobic
OR-85400010
OptiMo 12 fiber
–
OR-61500858
Breakout Kit
FC SERIES RACK-MOUNT PATCH FIBER CABINETS, BLACK
GIGALITE-10 50/125 850 nm 1300 nm
GIGALITE-10XB 50/125 850 nm 1300 nm
NetClear
Standard
NetClear
Standard
NetClear
Standard
NetClear
Standard
Fast Ethernet, 100 Mb/s
300
300
2000
2000
300
300
2000
2000
Gigabit Ethernet, 1 Gb/s
1000
550
600
550
1000
550
600
550
Fibre Channel, 2.125 Gb/s
500
480
-
-
600
300
-
-
10G Ethernet, 10 Gb/s
300
300
300
300
600
300
300
-
40/100G Ethernet, 10/100 Gb/s
100
100
-
-
150**
150
-
-
**IEE 802.3ba require Premium Performance components for OM4.
ADAPTER PANEL CAPACITY
HEIGHT
TRAY OPERATION
PART NO.
3
1U
Front/Rear Sliding
OR-FC01U-P
6
2U
Front/Rear Sliding
OR-FC02U-P
9
3U
Front/Rear Sliding
OR-FC03U-P
12
4U
Front/Rear Sliding
OR-FC04U-P
615 SERIES SURFACE-MOUNT CABINETS, BEIGE STYLE
PART NO.
2
OR-615SMFC-12P
4
OR-615SMFC-24P
8
OR-615SMFC-48P
ADAPTER PANELS, AQUA, CERAMIC SLEEVE STYLE
FIBER COUNT
PART NO.
SC, Duplex
12
OR-OFP-SCD12LC
LC, Duplex
12
OR-OFP-LCD12LC
LC, Quad
24
OR-OFP-LCQ24LC
Ortronics® Netclear MM10 Components FUSION SPLICE ACCESSORIES
MOMENTUM® 2 CASSETTES (4900/500 MHz-km)
14
STYLE
HEIGHT
PART NO.
TYPE
PART NO.
10G, 50/125 LC quad, 24 fiber, 2 MTP with pins
1U
OR-M2LCQ24-50E
12” Fusion Splice Tray
OR-FST2-F012
10G, 50/125 SC duplex, 12 fiber, 1 MTP with pins
1U
OR-M2SCD12-50E
40 mm Heat Shrink, Fusion Splice Protection Cover, pack of 50
OR-20500043
15
NETCLEAR MM10 ORDERING INFORMATION
NETCLEAR MM10 ORDERING INFORMATION
FIB-OR-COP II WORKSTATION OUTLETS
PRE-TERMINATED DATA CENTER CABLES
TYPE
PART NO.
STYLE
PART NO.
TrackJack Fib-or-Cop II, Fog White
OR-62100041
Micro Data Center, Plenum, 72 Fiber, 50/125 µm (4900/500 MHz)
BHDP72X77SSPxxx
Series II® Fib-or-Cop II, Fog White
OR-62100040
GIGAlite-10XB Multimode, Aqua Jacket, MTP Female with 3.0 mm
®
Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in.
For additional connectivity solutions please visit ortronics.com
Break-Out, Standard PE Pulling End Only — (2”OD), xxx length in feet
PATCH CORDS, DUPLEX FIBER
PART NO.
Micro Data Center, Plenum, 12 Fiber, 50/125µm (4900/500 MHz)
SC to SC
OR-P1DF2LRFZFZxxxM
GIGAlite-10XB Multimode, Aqua Jacket, MTP Female with 3.0 mm
LC to LC
OR-P1DF2LRGZGZxxxM
Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in.
CONNECTORS
50/125 Laser Optimized Multimode Fiber
BHDP12X77SSPxxx
Break-Out, Standard PE Pulling End Only — (1.3”OD), xxx length in feet
NOTE: xxx = length in meters
Micro Data Center, Plenum, 72 Fiber, 50/125µm (2000/500 MHz)
PATCH CORDS, DUPLEX (PREMIUM PERFORMANCE) FIBER
CONNECTORS
PART NO.
50/125 Laser Optimized Multimode Fiber
LC to LC
OR-P3DF2LROZOZxxxM
NOTE: xxx = length in meters
GIGAlite-10 Multimode, Aqua Jacket, MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard PE Pulling End Only — (2”OD), xxx length in feet Micro Data Center, Plenum, 12 Fiber, 50/125µm (2000/500 MHz)
SPACE SAVER PATCH CORDS FIBER
CONNECTORS
PART NO.
A-D 50/125 Laser Optimized Multimode Fiber
LC to LC
OR-P1DF6LPAZAZxxxM
A-A 50/125 Laser Optimized Multimode Fiber
LC to LC
OR-P1RF6LPAZAZxxxM
BHDP12E77SSPxxx
GIGAlite-10 Multimode, Aqua Jacket, MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard PE Pulling End Only — (1.3”OD), xxx length in feet NOTE: xxx = length in meters
NOTE: xxx = length in meters
BHDP72E77SSPxxx
Please visit www.berktek.com/teklab for other cable, fiber and configuration options.
PREMIUM LOW-LOSS PRE-TERMINATED MTP TO MTP MULTIMODE BACKBONE CABLES
SPACE SAVER PATCH CORDS (PREMIUM PERFORMANCE)
STYLE
PART NO.
OR-P3DF6LPAZAZxxxM
Micro Data Center, Plenum, 72 Fiber, Premium Low-Loss
BHDP72XLLSSPxxx
OR-P3RF6LPAZAZxxxM
(0.35 dB MTP connector pair loss), 50/125 µm (4900/500 MHz)
FIBER
CONNECTORS
PART NO.
A-B 50/125 Laser Optimized Multimode Fiber
LC to LC
A-A 50/125 Laser Optimized Multimode Fiber
LC to LC
GIGAlite-10XB m, Multimode, Aqua Jacket, MTP Female with 3.0 mm
NOTE: xxx = length in meters
Round, 39 in. Break-Out, Standard PE Pulling End Only — (1.3” OD)
Berk-Tek NetClear MM10 Components
NOTE: xxx = length in meters
OPTICAL FIBER PRODUCTS CABLE TYPE
FIBER TYPE
FIBERS
BANDWIDTHEMB, MHZ-KM
Horizontal Interconnect
EB
2
2000/500
ICP002EB3010/25
(Tight Buffer) Plenum
(OM3)
Please visit www.berktek.com/teklab for other cable, fiber and configuration options.
PART NO.
(850nm/1300nm)
4
4900/500
ICP004EB3010/25
Premise Distribution
6
2000/500
PDR006EB3010/25
(Tight Buffer) Riser
12
4900/500
PDR012EB3010/25
Adventum Indoor/Outdoor
24
2000/500
LTR0X024EB3010/25
(Loose Tube-Dry) Riser
16
48
4900/500
LTR12B04EB3010/25
Horizontal Interconnect
XB
2
2000/500
ICP002XB3010/X5
(Tight Buffer) Plenum
(OM4+)
4
4900/500
ICP004XB3010/X5
Premise Distribution
6
2000/500
PDR012XB3010/X5
(Tight Buffer) Riser
12
4900/500
PDR012XB3010/X5
Adventum Indoor/Outdoor
24
2000/500
LTR0X024XB3010/X5
(Loose Tube-Dry) Riser
48
4900/500
LTR12B048XB3010/X5
17
NETCLEAR MM10 ORDERING INFORMATION
NetClear® MM1 – 62.5 Micron Multimode — OM1 & OM2
PRE-TERMINATED BACKBONE/TRUNK INTERBUILDING CABLES STYLE
PART NO.
Adventum, Plenum, 72 Fiber. 20/125 µm (4900/500 MHz) GIGAlite-10XB
BLTP72X77SSPxxx
Multimode, Aqua Jacket, MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard PE Pulling End Only — (2” OD) Adventum, Plenum, 12 Fiber. 50/125 µm (4900/500 MHz) GIGAlite-10XB
BLTP12X77SSPxxx
Multimode, Aqua Jacket, MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard
The NetClear MM1 fiber optic solution features GIGAlite™ multimode fiber, guaranteed to support Gigabit Ethernet to industry leading distances and Ortronics connectivity for insertion-loss performance. The NetClear MM1 is supported by both the 50 micron and 62.5 micron fibers to provide outstanding support for legacy LED-based networks and high-speed, VCSEL-based systems up to 150 meters. This fiber optic cabling system is also the preferred media for security cameras for longer distances and where EMI and RFI are a threat to signal integrity.
PE Pulling End Only — (1.3” OD) Adventum, Plenum, 72 Fiber. 50/125 µm (2000/500 MHz) GIGAlite-10
BLTP72E77SSPxxx
Multimode, Aqua Jacket, MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard PE Pulling End Only — (2” OD) Adventum, Plenum, 12 Fiber. 50/125 µm (2000/500 MHz) GIGAlite-10
BLTP12E77SSPxxx
NETCLEAR MM1 DISTANCE GUARANTEES (in meters)
GIGALITE 50/125 850 nm 1300 nm
FIBER TYPE
NetClear
Standard
NetClear
Standard
62.5/125 850 nm NetClear
1300 nm
Standard
NetClear
Standard
Multimode, Aqua Jacket, MTP Female with 3.0 mm Round, 39 in.
Fast Ethernet, 100 Mb/s
300
300
2000
2000
300
-
2000
2000
Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard
Gigabit Ethernet, 1 Gb/s
750
550
600
550
300
275
600
550
PE Pulling End Only — (1.3” OD)
Fibre Channel, 2.125 Gb/s
390
300
-
-
220
150
-
-
10G Ethernet, 10 Gb/s
150
82
500
-
36
33
300
-
Adventum, Plenum, 72 Fiber. 50/125 µm (4900/500 MHz) GIGAlite-10XB
BLTP72X74SFPxxx
* NetClear MM1 solution can deliver specified 1300 nm distances at 10 Gb/s over WWDM technology.
Multimode, Aqua Jacket, MTP Female with 3.0 mm Round, 39 in. Break-Out, LC/PC with Duplex Clip with 2.0 mm Furcation, 39 in. Break-Out, Standard PE Pulling End Only — (2” OD) Adventum, Plenum, 72 Fiber. 50/125 µm (2000/500 MHz) GIGAlite-10 Multimode, Aqua Jacket, MTP Female with 3.0 mm Round, 39 in.
BLTP72E74SFPxxx
Ortronics® Netclear MM1 Components MOMENTUM® 2 CASSETTES (50/125 µm 500/500 MHz-km and 62.5/125 µm 200/500 MHz-km)
Break-Out, LC/PC with Duplex Clip with 2.0 mm Furcation, 39 in.
STYLE
HEIGHT
PART NO.
Break-Out, Standard PE Pulling End Only — (2” OD)
50 LC quad, 24 fiber, 2 MPO with pins
1U
OR-M2LCQ24-50E
50 SC duplex, 12 fiber, 1 MPO with pins
1U
OR-M2SCD12-50E
62.5 LC quad, 24 fiber, 2 MPO with pins
1U
OR-M2LCQ24-62
62.5 duplex, 12 fiber, 1 MPO with pins
1U
OR-M2SCD12-62
STYLE
HEIGHT
PART NO.
62.5 LC quad, 24 fiber, 2 MPO with pins
1U
OR-M3LCQ24-62
62.5 LC duplex, 24 fiber, with shutters
1U
OR-M3LSD12-62
62.5 duplex, 12 fiber, 1 MPO with pins
1U
OR-M3SCD12-62
NOTE: xxx = length in meters
Please visit www.berktek.com/teklab for other cable, fiber and configuration options.
MOMENTUM 3 CASSETTES (62.5/125 µm 200/500 MHz-km)
18
19
NETCLEAR MM1 ORDERING INFORMATION
NETCLEAR MM1 ORDERING INFORMATION Berk-Tek NetClear MM1 Components PRE-TERMINATED BACKBONE/TRUNK CABLES
FC SERIES RACK-MOUNT PATCH FIBER CABINETS ADAPTER PANEL CAPACITY
HEIGHT
TRAY OPERATION
PART NO.
STYLE
PART NO. BMDP72L77SSPxxx
3
1U
Front/Rear Sliding
OR-FC01U-P
Micro Data Center, Plenum, 72 Fiber, 50/125 µm (700/500 MHz)
6
2U
Front/Rear Sliding
OR-FC02U-P
GIGAlite Multimode, Orange Jacket, MTP Female with 3.0 mm
9
3U
Front/Rear Sliding
OR-FC03U-P
Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in.
12
4U
Front/Rear Sliding
OR-FC04U-P
Break-out, Standard PE Pulling End Only — (2”OD), xxx length in feet Micro Data Center, Plenum, 12 Fiber, 50/125 µm (700/500 MHz)
615 SERIES SURFACE-MOUNT PATCH FIBER CABINETS, BEIGE ADAPTER PANEL CAPACITY
PART NO.
2
OR-615SMFC-12P
4
OR-615SMFC-24P
8
OR-615SMFC-48P
BMDP12L77SSPxxx
GIGAlite Multimode, Orange Jacket, MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-out, Standard PE Pulling End Only — (1.3”OD), xxx length in feet Micro Data Center, Plenum, 72 Fiber, 62.5/125 µm (200/500 MHz)
BMDP72E77SSPxxx
Multimode, Orange Jacket, MTP Female with 3.0 mm
ADAPTER PANELS, BLACK, BEIGE ADAPTERS, PHOSPHOR BRONZE SLEEVE STYLE
FIBER COUNT
PART NO.
SC, Duplex
12
OR-OFP-SCD12MB
LC, Duplex
12
OR-OFP-LCD12MB
LC, Quad
24
OR-OFP-LCQ24MB
Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-out, Standard PE Pulling End Only — (1.3”OD), xxx length in feet Please visit www.berktek.com/teklab for other options available.
FIBER OPTIC CABLES CABLE TYPE
FIBER TYPE
FIBERS
BANDWIDTHOFL
PART NO.
PART NO.
Horizontal Interconnect
50/125
2
700/500
ICP002LB3010/75
OR-62100041
(Tight Buffer) Plenum
62.5/125
4
200/500
ICP004CB3510/25
OR-62100040
Premise Distribution
50/125
6
700/500
PDR006LB3010/75
FIB-OR-COP II WORKSTATION OUTLETS TYPE TrackJack® Fib-or-Cop II, Fog White Series II Fib-or-Cop II, Fog White ®
PATCH CORDS, DUPLEX, 1 METER FIBER
CONNECTORS
PART NO.
62.5/125
SC to SC
OR-P1DA2BRFZFZxxxM
LC to LC
OR-P1DA2BRGZGZxxxM
SC to SC
OR-P1DF2LRFZFZxxxM
LC to LC
OR-P1DF2LRGZGZxxxM
50/125
(Tight Buffer) Riser
62.5/125
12
200/500
PDR012CB3510/25
Adventum Indoor/Outdoor
50/125
24
700/500
LTR0X024LB3010/25
(Loose Tube-Dry) Riser
62.5/125
48
200/500
LTR12B048CB3510/25
NOTE: Contact Berk-Tek Customer Service at 1-800-BERK-TEK for complete listings of product offerings. Please visit www.berktek.com for all GIGAlite optical fiber specifications.
NOTE: xxx = length in meters, 001, 002, 003 are the standard lengths.
OptiMo® FIELD-INSTALLABLE CONNECTORS DESCRIPTION
STYLE
HEIGHT
PART NO.
No Epoxy/No Polish
SC
62.5/125
OR-205KAS9FA-62
Zirconia Ferrule
SC
50/125
OR-205KAS9FA-50T
(for tight buffered cable)
LC
62.5/125
OR-205KAS9GA-62
LC
50/125
OR-205KAS9GA-50T
Anaerobic Termination,
Field Installation Kit
Pre-polished
OR-854B00000-1
SC, multimode
Multimode
OR-205KAN9FA-MM
Zirconia Ferrule
LC, multimode
Multimode
OR-205KAN9GA-MM
(ideal for Adventum™ cable)
Field Installation Kit
Anaerobic
OR-85400010
OptiMo 12 fiber
–
OR-61500858
Break-Out Kit
20
21
NETCLEAR MM1 ORDERING INFORMATION
NetClear® SM – Single-mode Solutions The high-performance, NetClear SM single-mode fiber optic solution provides virtually unlimited information and signal carrying capacity to provide the longest life cycle for a structured cabling system investment. This system is guaranteed to support applications beyond 10 Gigabit, as well as extended distances and bandwidths in mission-critical environments such as backbone, data centers, SANs and LANs.
RACK-MOUNT CABINETS
The NetClear SM fiber solution was developed to facilitate advanced network requirements and offers both backbone and campus fiber solutions that guarantee performance and network longevity. The NetClear SM solution is supported by Berk-Tek’s single-mode fiber, which exceeds the requirements of EIA/TIA and ITU G 652D for low water peak single-mode fiber. Low attenuation and superior fiber geometry also allow for low loss fusion splicing and improved results during field termination.
APPLICATION
HT.
ADAPTER PANEL CAPACITY
TRAY OPERATION
PART NO.
Patching
1U
3
Front/Rear Sliding
OR-FC01U-P
2U
6
Front/Rear Sliding
OR-FC02U-P
3U
9
Front/Rear Sliding
OR-FC03U-P
Patch/Slice
4U
12
Front/Rear Sliding
OR-FC04U-P
2U
6
Front/Rear Sliding
OR-FC02U-C
3U
9
Front/Rear Sliding
OR-FC03U-C
4U
12
Front/Rear Sliding
OR-FC04U-C
615 SERIES SURFACE-MOUNT CABINETS, BEIGE ADAPTER PANEL CASSETTE CAPACITY
PART NO.
2
OR-615SMFC-12P
4
OR-615SMFC-24P
8
OR-615SMFC-48P
SERIES ADAPTER PANELS, BLUE, CERAMIC SLEEVES
NETCLEAR SM DISTANCE GUARANTEES (in meters)
FIBER TYPE
1310 nm NetClear Standard
1550 nm NetClear
Standard
STYLE
FIBER COUNT
PART NO.
SC, Duplex
12
OR-OFP-SCD12AC
LC, Duplex
12
OR-OFP-LCD12AC
LC, Quad
24
OR-OFP-LCQ24AC
ATM, 622 Mb/s
>2
2
>5
5
Gigabit Ethernet, 1Gb/s
>5
5
-
-
Fibre Channel, 2.125 Gb/s
>10
10
-
NA
10 Gb/s Ethernet
>10
10
>40*
40
TYPE
PART NO.
40/100 Gb/s Ethernet
>10
10
>40*
40
12” Fusion Splice Tray
OR-FST2-F012
40 mm Heat Shrink, Fusion Splice Protection Cover, pack of 50
OR-20500043
* NetClear SM solutions deliver > 10 km distances with 1310 nm serial transmission or WWDM technology.
FUSION SPLICE ACCESSORIES
PATCH CORDS, UPC, 1 METER Ortronics® Netclear SM Components MOMENTUM® 2 CASSETTES (SINGLE-MODE FIBER) STYLE
HEIGHT
PART NO.
SM LC quad, 24 fiber, 2 MPO with pins
1U
OR-M2LCQ24-09
SM SC duplex, 12 fiber, 1 MPO with pins
1U
OR-M2SCD12-09
MOMENTUM 3 CASSETTES (SINGLE-MODE FIBER) STYLE
HEIGHT
PART NO.
SM LC quad, 24 fiber, 2 MPO with pins
1U
OR-M3LCQ24-09
SM SC duplex,12 fiber, 1 MPO with pins
1U
STYLE
PART NO.
SC to SC Duplex
OR-P1DCIRRZRZxxxM
LC to LC Duplex
OR-P1DC2IRSZSZxxxM
NOTE: Replace xxx in part number with length in meters — 001, 002, 003 are the standard lengths.
PIGTAILS, UPC 2 METER LENGTH FIBERS
STYLE
PART NO.
1
SC
OR-P1PC9FRRZZZ002M
LC
OR-P1PC9FRSZZZ002M
SC
OR-P1SC4ZRRZZZ002M
LC
OR-P1SC4ZRSZZZ002M
SC
OR-P1TC4ZRRZZZ002M
LC
OR-P1TC4ZRSZZZ002M
6
OR-M3SCD12-09 12
22
23
Field-Installable Connectors DESCRIPTION
STYLE
FIBER
PART NO.
No Epoxy/No Polish
SC
Single-mode
OR-205KAS9FA-09
Zirconia Ferrule
LC
Single-mode
OR-205KAS9GA-09
(25 per pack)
Field Installation Kit
Pre-Polished
OR-854B00000-1
(for tight buffered cable)
SC, Single-mode
Single-mode
OR-205KAN9FA-SM
Anaerobic Termination,
LC, Single-mode
Single-mode
OR-205KAN9GA-SM
Zirconia Ferrule
Field Installation Kit
Anaerobic
OR-85400010
(25 per pack)
OptiMo 12 fiber
–
OR-61500858
(ideal for Adventum™ cable)
Break-Out Kit
Berk-Tek NetClear SM Components PRE-TERMINATED DATA CENTER CABLES STYLE
PART NO.
Micro Data Center, Plenum, 72 Fiber, Single-mode, Yellow Jacket,
BMDP72AEESSPxxx
SUPPORT SOLUTIONS
NETCLEAR SM ORDERING INFORMATION
Legrand
®
Physical Infrastructure
Mighty Mo® Network and Server Cabinets A solid foundation is critical for superior network performance in high density applications. Ortronics® Mighty Mo cabinets are designed to protect network integrity while addressing the critical needs in today’s data centers and large premise networks — airflow, density, protection and performance. Boasting industry leading cable management features, the Mighty Mo product line includes a complete array of accessories to create customized solutions for a wide variety of network and data center configurations.
MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard PE Pulling End Only — (2”OD) Micro Data Center, Plenum, 48 Fiber, Single-mode, Yellow Jacket,
BMDP48AEESSPxxx
MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard PE Pulling End Only — (2”OD) Micro Data Center, Plenum, 24 Fiber, Single-mode, Yellow Jacket,
BMDP24AEESSPxxx
MTP Female with 3.0 mm Round, 39 in. Break-Out, MTP Female with 3.0 mm Round, 39 in. Break-Out, Standard PE Pulling End Only — (1.3”OD) NOTE: xxx = length in meters
Please visit www.berktek.com/teklab for other cable, fiber and configuration options.
FIBER OPTIC CABLE CABLE TYPE
FIBERS
PART NO.
Horizontal Interconnect (Tight Buffer) Plenum
2
ICP002AB0707
4
ICP004AB0707
6
PDR006AB0707
12
PDR012AB0707
Adventum™ Indoor/Outdoor (Loose Tube-dry) Plenum
24
LTP0X024AB0403
48
LTP12B048AB0403
Outside Plant (Loose Tube, Gel Buffer Tube)
72
OPDD12B072AB0403
144
OPDD12B144AB0403
Premise Distribution (Tight Buffer) Riser
NOTE: Berk-Tek single-mode optical fibers are ITU-T G.652D compliant. Contact Berk-tek at 1-800-BERK-TEK for complete product listings or visit www.berktek.com.
24
ALL PRE-CONFIGURED SERVER CABINET VERSIONS INCLUDE: • Frame configured with cable opening at bottom rear • Frame levelers • Two pairs of RU labeled mounting rails with 3/8” square holes • Full profile mesh front door • Split flat mesh rear door • Two “L” shaped finger managers on rear rails • Vertical PDU mount and lacing bar • Divider or side panels as stated below • Solid top panel in front • Cable entry top panel in rear • Rack unit cage nuts #12-24 thread (package of 50) • Two packages of 50 panel mounting screws #12-24 (total of 100) • Additional adhesive rack unit labels (mounted inside of rear set of rails)
PART NO. Divider Version
PART NO. Side Panels Version
DESCRIPTION Server Cabinet Sizes*
MMC422440-00005
MMC422440-00006
42 RU x 24" wide x 42" deep
MMC422446-00002
MMC422446-00003
42 RU x 24" wide x 48" deep
MMC472440-00003
MMC472440-00004
47 RU x 24" wide x 42" deep
MMC472446-00001
MMC472446-00002
47 RU x 24" wide x 48" deep
MMC423240-0000G
MMC423240-0000H
42 RU x 32" wide x 42" deep
MMC423246-00007
MMC423246-00008
42 RU x 32" wide x 48" deep
MMC473240-00003
MMC473240-00004
47 RU x 32" wide x 42" deep
MMC473246-00001
MMC473246-00002
47 RU x 32" wide x 48" deep
“Divider” versions have a right side divider panel and ganging hardware (for within row). “Side Panels” versions have a set of end panels (for stand alone or to create ends of row). *Depth includes doors
PRE-CONFIGURED NETWORK CABINETS ALL PRE-CONFIGURED NETWORK CABINET VERSIONS INCLUDE: • Frame configured with cable opening at bottom front • Frame levelers • Two pairs of RU labeled mounting rails with #12-24 tapped holes • Full profile plexiglas front door • Full flat solid rear door • Two “L” shaped finger managers on front rails
• • • •
Right and left locking side panels Fan top panel in front Cable entry top panel in rear Package of 50 panel mounting screws #12-24
NETWORK CABINET
NETWORK CABINET SIZE
MMC422434-00004
42 RU x 24" W x 36" D
MMC423234-0000A
42 RU x 32" W x 36" D
25
ORTRONICS ORDERING INFORMATION
Mighty Mo® Advanced Cable Management Systems The patented Mighty Mo Advanced Racking System is specifically designed for higher density cabling applications, such as data centers, SANs and main cross connect areas. The Mighty Mo system features an innovative vertical management "cage" with individual 1-rack unit fingers and a double-hinged door. Horizontal cable managers, available with covers, are designed to match the layout of Ortronics® Clarity® patch panels. Mighty Mo racks and accessories work together to mount, manage and organize virtually any structured cabling equipment and provide a unified, streamlined look. The Mighty Mo 10 racks are designed to maximize the airflow of network equipment. Honeycomb side rails and baffles combine to manage intake and exhaust air creating cold aisle/hot aisle air distribution from side vented equipment. The perforated side rails allow ventilated air to be exhausted, while the baffles ensure the proper flow of air from cold aisle to hot aisle. Mighty Mo® 10 and 6 Advanced Racking System.
MIGHTY MO 10 & 6 COMPONENTS MFG PART NO.
DESCRIPTION
OR-MM6710
MM6 cable management rack with 10.5" channel depth, 7', 45 rack units
OR-MM6716
WIREMOLD ORDERING INFORMATION
Wiremold® Power Commander Power Distribution Units Keep up with the ever increasing management demands of your data center with Power Commander IQ Network Controlled Power Distribution Units (PDUs). These models offer secure remote access for all power outlets, giving users the flexibility they need to mange the ever increasing loads placed on IT infrastructure. Available in 0U, 1U and 2U configurations, all models have current and temperature monitoring, critical in today’s higher power density environments. cTUVus Listed to EN60950-1, ensuring safe and reliable distribution of power. Power Commander® Power Distribution Units PART NO.
DESCRIPTION
SPDU8-1U
15A Smart PDU, (8) 15A simplex outlets, 19” length, Black.
SPDU16-2U
15A Smart PDU, (16) 15A simplex outlets in two banks of 8, 19” length, Black.
SPDU20-0U
15A Smart PDU, (20) 15A simplex outlets, 61” length, Black.
High Current PDU High amperage 30 amp or 40 amp 120V and 208V units feature an aesthetic narrow aluminum profile available in black or gray. Two easy access circuit breakers provide overload protection and the T-slot mounting rail allows several mounting options in tight spaces. Current monitoring allows you to distribute power loads evenly to maximize current draw and avoid circuit overloads. Extensive custom options are available.
PART NO.
DESCRIPTION
3A44B2-1
30A, PDU, 24 20A simplex outlets, 48” length. Gray.
3B44B2-1
30A, PDU, 24 20A simplex outlets, 48” length. Black.
3A86B2-1
30A, PDU, 36 20A simplex outlets, 70” length. Gray.
3B86B2-1
30A, PDU, 36 20A simplex outlets, 70” length. Black.
3B53B2-1-AM
30A, PDU, 18 20A simplex outlets. Two lighted LCD digital ammeters, 54” length.
3B43B2-1-RAM
30A, PDU, 18 20A simplex outlets. Two lighted remote LCD ammeters, 48” length.
30 AMP UNIT SPECIFICATIONS AC Voltage Input
100 to 127V
MM6 cable management rack with 16.25" channel depth, 7', 45 rack units
AC Voltage Output
100 to 127V
OR-MM67SVR
MM6 cable management rack with four-post server frame, 7', 45 rack units
Frequency
60 Hz
OR-MM6VMD710
MM6 vertical cable management with fingers and door, 10" x 13" x 7'
OR-MM6VMD706
MM6 vertical cable management with fingers and door, 6" x 8" x 7’
Load Capacity
UL Rated 24 Amps max – (2) 12 Amp circuits
OR-MM6VMR710
MM6 rear vertical cable management cage with latches for routing cable to rear of FC series cabinets
Circuit Breaker
(2) 15 Amp UL489 Listed circuit breakers
OR-MM6HMF2RU
MM6 horizontal cable management panel with fingers, cover, 2 rack units, 3.5" x 19"
OR-MM10716
MM10 cable management rack, 16.25" channel depth, 7', 45 rack units
Output Receptacle
NEMA 5-20R
OR-MM107SVR
MM10 cable management rack with four-post aluminum frame with steel EIA rails, 7', 45 rack units
Conformance Standards
UL60950-1 1st Edition
OR-MM10VMD712
MM10 vertical cable management cage with door, 12.13" x 13" x 7'
OR-MM10VMD716
MM10 vertical cable management cage with door, 16.38" x 13" x 7'
Product Warranty
2 years
OR-MM10AB71612
MM10 airflow baffles, for use with 7' x16" Mighty Mo 10 rack and 12" wide Mighty Mo cage MM10 airflow baffles, for use with 7' x16" Mighty Mo 10 rack and 16" wide Mighty Mo cage
Power Cable – AWG Length & Plug Type
10/3 SJT Type, L5-30P, 12 ft. [3.6m]
OR-MM10AB71616
26
27
WIREMOLD ORDERING INFORMATION
WIREMOLD ORDERING INFORMATION
Plug-In Outlet Center® Units PART NO.
DESCRIPTION
4B44B2-2
40A, PDU, 24 20A simplex outlets, 48” length.
4B86B2-2
40A, PDU, 36 20A simplex outlets, 70” length.
4B53B2-2-AM
40A, PDU, 18 20A simplex outlets. Two lighted LCD digital ammeters, 54” length.
4B43B2-2-RAM
40A, PDU, 18 20A simplex outlets. Two lighted remote LCD ammeters, 48” length.
40 AMP UNIT SPECIFICATIONS AC Voltage Input
200 to 230V
AC Voltage Output
100 to 115V
Frequency
80 Hz
Load Capacity
UL Rated 32 Amps max – (2) 16 Amp circuits
Circuit Breaker
(2) 20 Amp UL489 Listed circuit breakers
Output Receptacle
NEMA 5-20R
Conformance Standards
UL60950-1 1st Edition
Product Warranty
2 years
Power Cable – AWG Length & Plug Type
12/4 SJT Type, L14-20P, 12 ft. [3.6m]
Bring power safely and conveniently to your communications closet, rack, or cabinet with a full line of Plug-In Outlet Center Units from Legrand | Wiremold. Units are available in both 15 and 20 Amp configurations. Wiremold/Legrand also offers extensive custom capabilities for Plug-In Outlet Center Units.
RACK MOUNT PIOC UNITS Fit standard 19” [482mm] relay racks. Compact 1U design takes up minimum space. 23” [584mm] units available. Include a black matte finish and a 6’ or 15’ black cord. All units are UL and cUL Recognized components. 15 or 20 Amp units available. Units also available with surge protection.
PART NO.
DESCRIPTION
J08B0B
8 rear outlets, receptacles rotated 90˚. 4 outlets spaced for transformers. Lighted switch. 6’ cord.
J08B2B
8 rear outlets, receptacles rotated 90˚. 4 outlets spaced for transformers. Lighted switch. 6’ cord.
J06B0B
6 rear outlets, lighted switch. 6’ cord.
J06B2B
6 rear outlets, lighted switch. 15’ cord.
J06B0BX
6 rear outlets, 6’ cord.
J06B2BX
6 rear outlets,15’ cord.
CABINETMATE® PIOC UNITS Include a narrow 11/2” x 1 3/16” [38mm x 20mm] aluminum housing. Include gray finish and 6’ or 15’ black cord. All units are UL and cUL Recognized components. 15 or 20 amp units available. Units also available with surge protection.
PART NO.
DESCRIPTION
4810ULBC
10 outlets. Length 48”, 6’ cord
4810ULBD
10 outlets. Length 48”, 15’ cord
7011ULBC
11 outlets. Length 70”, 6’ cord
7011ULBD
11 outlets. Length 70”, 15’ cord
7710ULBC
12 outlets. Length 77”, 6’ cord
7710ULBD
12 outlets. Length 77”, 15’ cord
MeterReader® Current Monitoring Device The MeterReader Current Monitoring Device (CMD) is the first UL approved product of its kind. Compatible with bothWiremoldandcompetitors’PowerDistributionUnits,retrofittinganexistingpowerstripwiththeMeterReader CMD allows the user to bypass costly downtime and eliminate high equipment and labor charges associated with adding ammeter capabilities. Inserted between the power source and your equipment, the MeterReader CMD measures the current and displays the reading on the remote unit installed at the front of your IT rack or cabinet.
METERREADER CMD Fit Standard 19” [482mm] relay racks. Compact 1U design takes up minimum space. 23” [584mm] units available. Include a black matte finish and a 6’ or 15’ black cord. All units are UL and cUL Recognized components. 15 or 20 amp units available. Units also available with surge protection.
28
29
WIREMOLD ORDERING INFORMATION
WIREMOLD ORDERING INFORMATION
4000 Designer Series Raceway
ADDITIONAL 4000 DESIGNER SERIES RACEWAY COMPONENTS AVAILABLE:
Wiremold 4000 Designer series Raceway is the next generation in innovative surface raceway systems, providing an aesthetically pleasing and functionally superior alternative to existing raceway profiles. DS4000 Series Raceway includes a variety of innovative features and fittings that save insatllation time, cost less to specify, and provide 1/3 more wiring capacity than conventional box-style raceway profiles.
30
PART NO.
DESCRIPTION
DS4010A
Entrance End Fitting
DS4047MAB
Single-Channel MAB Device Plate
DS4011
Flat Elbow
DS4047R
Single-Channel Decorator Device Plate
DS4018
External Elbow
DS4017
Internal Elbow
DSDWND
Downward Duplex Device Plate
DSDWNR
Downward Decorator Device Plate
DS4047D
Single-Channel Duplex Device Plate
DS4047C
Single-Channel NEMA Device Plate
DS4075
Small Obstacle Transition Fitting
DS4015
Divided Tee Fitting
DS4075A
Offset Fitting
DS4010B
Blank End Fitting
PART NO.
DESCRIPTION
DS4000B
Raceway Base
DS4000C
Raceway Cover
DS4000WC
Wire Clips
DS4001
Adjust-to-Fit Coupling
DS4006
Seam Clip
DS4006B
Half Seam Clip/Blank Faceplate
DS4014A
Backfeed Coupling
DS4047DQ
Single-Channel Duplex Device Plate
DSDWNDQ
Downward Duplex Device Plate
DSDWNX
Crossover Kit
DS4089
Adapter to 4000 Series Raceway
DSTRK
Tamper-Resistance Kit
640DS
DS4000C Cutter
650RT
Cover Removal Tool
31
WIREMOLD ORDERING INFORMATION
WIREMOLD ORDERING INFORMATION
2400 Series Raceway The V2400 Series Raceway from Legrand | Wiremold is a single compartment raceway for communication or power applications ideal for use in classrooms, offices and hotel applications or anywhere a small low profile raceway is needed. V2400D Divided Raceway is a low profile steel raceway for use where a limited number of power and low-voltage cables are required in the same raceway.
EVOLUTION™ POKE-THRU 6ATC & 8ATC SERIES Large capacity for power, communications or A/V devices. All metal die-cast aluminum cover. 6ATC Series has two and one half gangs capacity and requires 6" core hole. 8ATC Series has four gang capacity and requires 8" core hole.
PART NO.
DESCRIPTION
6ATCPBK
6” Poke-thru assembly with black cover
6ATCPGY
6” Poke-thru assembly with gray cover
6ATCPNK
6” Poke-thru assembly with nickel cover
6ATCPBS
6” Poke-thru assembly with brass cover
6ATCPBZ
6” Poke-thru assembly with bronze cover
8ATCPBK
8" Poke-thru assembly with black cover
8ATCPGY
8” Poke-thru assembly with gray cover
8ATCPNK
8” Poke-thru assembly with nickel cover
8ATCPBS
8” Poke-thru assembly with brass cover
8ATCPBZ
8” Poke-thru assembly with bronze cover
PART NO.
DESCRIPTION
4000
Series Raceway Section
4089
Reducing Connector
24DWND
Downward Duplex Device Bracket
RC4 Surface Series
24DWNR
Downward Decorator Device Bracket
Unit includes four prewired 20A receptacles. Each duplex receptacle can be wired as standard duplex or
2400BC
Single-Channel Raceway Base & Cover
2406
Cover Clip
2407
106 Device Bracket & Frame
2410C
Entrance End Fitting
2411FO
Radiused Flat Elbow
2415O
Radiused Tee Fitting
2417O
Radiused Internal Elbow
2418O
Radiused External Elbow
AMD8 All Communications Poke-Thru Device
2448
One-Gang Device Box
All communication flush style poke-thru device will accept up to eight ports for connectivty devices. For
2448-2
Two-Gang Device Box
both new and retrofit installations in schools, commercial offices, government and institutional facilities
2451H
Back Feed Fitting
PART NO.
DESCRIPTION
2489
Side Reducing Connector
AMD8ATCGY
Poke-thru assembly with painted gray flange
2686FO
Transition Feed Fitting
AMD8ATCBK
Poke-thru assembly with black flange
500
500 Series Raceway
AMD8ATCAL
Poke-thru assembly with aluminum flange
5744
Extra Deep Box
AMD8ATCBS
Poke-thru assembly with brass flange
isolated ground. Unit also includes Ortronics® TracJack® mounting bezels, four blank TracJack inserts for closing off unused communication openings and Series II® bezels.
PART NO.
DESCRIPTION
RC4ATCGY
Poke-thru assembly with painted gray flange
RC4ATCBK
Poke-thru assembly with black flange
RC4ATCAL
Poke-thru assembly with aluminum flange
RC4ATCBS
Poke-thru assembly with brass flange
Additional parts on diagram.
32
33
WIREMOLD ORDERING INFORMATION
WIREMOLD ORDERING INFORMATION
AV3 A/V Poke-Thru DeviceSeries
RFB9 & RFB11 Series
Flush style poke-thru device specifically designed for the audio/video market. Includes 20A duplex receptacle
Provide power, communications, and the special space requirements of audio-visual type connectors to above
and three ports for A/V style connectivity devices.
grade floors, in open space areas, or directly to the workstation.
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
AV3ATCGY
Poke-thru assembly with painted gray flange
RFB9
9-gang box. 14 5/16” L x 12 1/8” W x 4 1/8” D
AV3ATCBK
Poke-thru assembly with black flange
RFB9-OG
9-gang on-grade box. 14 5/16” L x 12 1/8” W x 4 1/8” D
AV3ATCAL
Poke-thru assembly with aluminum flange
RFB11
11-gang box. 14 5/16” L x 12 1/8” W x 6 1/8” D
AV3ATCBS
Poke-thru assembly with brass flange
RFB11-OG
11-gang on-grade box. 14 5/16” L x 12 1/8” W x 6 1/8” D
RFB119CTC
Carpet cover assembly includes carpet cutout area.
RFB119BTC
Flush assembly.
Recessed Floor Boxes Wiremold Resource RFB floor boxes offer unsurpassed flexibility and a wide range of configurations, thanks to independent wiring compartments and feed-through wiring capability. Resource RFB Floor boxes offer
Vista Solution Series
versatile activation solutions ideal for areas with different needs at differnt times. The Resource RFB Series
Vista Column Consolidation Points provide channels that conceal wires and cables behind a decorative
provides independent wiring compartments for power, communications and audio/video services to open space
center panel and incorporate a user-installed patch panel with easy, secured access through a lockable
areas or directly to workstations. Features TopGuard™ protection that exceeds 2003 UL scrub water standards.
door. They can be placed anywhere in an open space, providing maximum communication flexibility and unique design elements. These modular columns are easily relocated to accommodate changing space
RESOURCE RFB SERIES
requirements.
PART NO.
DESCRIPTION
RFB4
Four compartment, combination floor box, Steel – 12 3/4”L x 10”W x 3 7/16”D
RFB4-CI-1
Four compartment, combination floor box, Cast Iron – 14 1/2”L x 11 7/8”W x 3 7/16”D
RFB4-SS
Four compartment, combination floor box, Shallow Steel – 13 5/8”L x 10”W x 2 7/16”D
RFB2
Two compartment, combination floor box, Steel – 13 1/8”L x 6 1/2”W x 3 7/16”D
RFB2-OG
Two compartment, combination floor box, On-grade – 13 1/8”L x 6 1/2”W x 3 7/16”D
RFB2-SS
Two compartment, combination floor box, Shallow Steel – 13 1/8”L x 6 1/2”W x 2 5/8”D
RFB6
Six compartment, multiservice combination floor box, Steel
RFB6-OG
Six compartment, multiservice combination floor box, On-grade
PART NO.
DESCRIPTION
VFL662345RTGYD
Large anodized aluminum frame with round end channels, Ortronics TracJack® and Series II® bezels in gray, accommodates 10' ceiling.
VLCP662345
Large anodized aluminum frame with round end channels. Includes gray Ortronics TracJack and Series II bezels in gray. Includes anodized aluminum back panel and 60” door, accommodates 10' ceiling.
VPLY2345
Anodized aluminum back panel of column
VY6023435L1Y
Anodized aluminum door with a keyed lock and flush, black doo pull, 60"L
VEL66234524
Extension for the column to accommodate up to 12’ ceilings. Includes anodized aluminum center panel.
Floorport Series For use with RFB4 Series floor boxes.
34
PART NO.
DESCRIPTION
S38CCTC
Cutout lid, Flanged assembly, Tab release latch.
S38BBTC
Flush lid, Flanged assembly, Tab release latch.
S39CCTC
Cutout lid, Flangeless assembly, Tabless release latch.
S39BBTC
Flush lid, Flangeless assembly, Tabless release latch.
S40CCTC
Cutout lid, Flanged assembly, Tabless release latch.
S40BBTC
Flush lid, Flanged assembly, Tabless release latch.
35
CABLOFIL速 ORDERING INFORMATION
CABLOFIL速 ORDERING INFORMATION
Cablofil速 Cable Tray and Accessories Cablofil Wire Mesh Cable Tray been subjected to decades of testing and has seen widespread use with more than 90,000 miles installed
CF 105
CF 150
FAST ASSEMBLING SYSTEM (FAS) The FAS system utilizes simple one-step locking tabs that require no additional hardware to secure tray
Cablofil wire mesh tray is constructed of precision-engineered high quality welded steel wire. It has
CF 54
Support Systems
rungs to its supports, reducing installation time and saving money.
worldwide. Cablofil tray can be used in a variety of applications, ranging from supporting heavy power
FASP
cables on oil drilling platforms to supporting data cabling in modern office buildings.
FAS Profile supports Cablofil tray in trapeze hung and/or wall mounted applications. Available in 6" through 120".
PART NO.
DESCRIPTION
FASP200PG
8" Profile
FASP300PG
12" Profile
PART NO.
DESCRIPTION
CF 54/50EZ
2" Deep Tray, 2" D x 2" W x 10' L
CF 54/100EZ
2" Deep Tray, 2" D x 4" W x 10' L
CF 54/150EZ
2" Deep Tray, 2" D x 6" W x 10' L
CF 54/200EZ
2" Deep Tray, 2" D x 8" W x 10' L
FASPCH
CF 54/300EZ
2" Deep Tray, 2" D x 12" W x 10' L
FASPCH supports Cablofil tray in center hung ceiling installations and supports tray widths from 8" to 24".
CF 54/450EZ
2" Deep Tray, 2" D x 18" W x 10' L
CF 54/500EZ
2" Deep Tray, 2" D x 20" W x 10' L
PART NO.
DESCRIPTION
CF 54/600EZ
2" Deep Tray, 2" D x 24" W x 10' L
FASPCH300PG
12" Center Hanger
CF 105/100EZ
4" Deep Tray, 4" D x 4" W x 10' L
FASPCH450PG
18" Center Hanger
CF 105/150EZ
4" Deep Tray, 4" D x 6" W x 10' L
FASPCH600PG
24" Center Hanger
CF 105/200EZ
4" Deep Tray, 4" D x 8" W x 10' L
CF 105/300EZ
4" Deep Tray, 4" D x 12" W x 10' L
CF 105/450EZ
4" Deep Tray, 4" D x 18" W x 10' L
FASU Universal Bracket supports Cablofil tray in wall-mounted applications in widths from 4" to 24".
CF 105/500EZ
4" Deep Tray, 4" D x 20" W x 10' L
Patented FAS style attachment holds cable tray secure without nuts and bolts.
CF 105/600EZ
4" Deep Tray, 4" D x 24" W x 10' L
PART NO.
DESCRIPTION
CF 150/300EZ
6" Deep Tray, 6" D x 12" W x 10' L
FASU100PG
4"
CF 150/450EZ
6" Deep Tray, 6" D x 18" W x 10' L
FASU150PG
6"
CF 150/500EZ
6" Deep Tray, 6" D x 20" W x 10' L
FASU200PG
8"
FASU300PG
12"
NOTE: Also available in 1".
A unique curved top enables direct attachment to machinery, ceilings, or walls. Use CE40 for support attachment and SWK for splicing.
NOTE: Other sizes and finishes available.
FASP
Only one threaded rod is needed to suspend the tray.
NOTE: Other sizes and finishes availabe. FASPCH
FASU
FASU
NOTE: Other sizes and finishes available.
AS TRAPEZE HANGING CLIP
PART NO.
DESCRIPTION
CFG50/100EZ
2" Deep Tray, 2"D x 4" W x 10' L
CFG50/200EZ
2" Deep Tray, 2"D x 8" W x 10' L
Easy to add or remove cables.
PART NO.
DESCRIPTION
ASPG
Trapeze Hanging Clip; 50 per package
NOTE: Other sizes and finishes available.
36
37
CABLOFIL速 ORDERING INFORMATION
Splicing EDRN The EDRN is the fastest and strongest splice. It requires a special assembly tool, which is contained in every bag of splices.
PART NO.
DESCRIPTION
EDRNEZ
Fast splice, 50 per pack
EZ T 90 KIT One kit contains hardware for one 90 degree tee or two 90 degree bends. Each EZ T90 kit includes: EDRN
(2) 90 degree braces; (10) EZ BN 1/4; (10) CE 25; and (4) CE 40
PART NO.
DESCRIPTION
EZT90 KIT
One tee or two 90 degree bends, 1 per package
SPLICE WASHER KIT (SWK) Used for bolting turns, bends and tees. Splices any two sections of Cablofil cable tray. EZ T 90
PART NO.
DESCRIPTION
SWKEZ
Splice washer kit, 50 per pack
Cutting Cablofil is simple. Cablofil cable tray is cut on site to exact measurements by cutting the steel wire with a side-action bolt cutter. It is important to always use a side-action bolt cutter when working with the Cablofil system. It ensures the integrity of the galvanic protective layer on the wire and helps create a galvanic couple to protect the new cut.
38
PART NO.
DESCRIPTION
COUPFIL
Bolt Cutter
BECAUSE YOUR BUSINESS RUNS THROUGH US
THE BERK-TEK COMPOSITE COPPER/FIBER CABLE incorporates high-bandwidth optical fibers (up to 12 tight buffered or 24 loose tube) with up to 7 insulated stranded THWN (Thermoplastic Heat and Water Resistant, Nylon coated) or TFFN (Thermoplastic Flexible Fixture Wire, Nylon coated) conductors ranging from 12 to 18 AWG. Listed as CL3R-OF/PLTC-OF, these cables extend the distance of PoE devices significantly beyond the 100-meter limitations of Category 5e or 6 twisted pair cable, making it ideal for IP cameras, wireless access points or other BAS applications.
CONSTRUCTION
Each cable consists of multiple THWN or TFFN copper conductors and multiple fibers cabled together within an outer jacket. Cable design accommodates from 2 to 7 conductors and 2 to 24 fibers.
Telecommunications Room
Horizontal Run
Combining control and communications in industrial pathways
Common pathway for fiber backbone and Class 2 and 3 power supplies
Fibers can be tight buffered or in a loose tube
10BASE-FL
100BASE-SX/100BASE-FX
Cable is dry water-blocked for outdoor installations
F E AT U R E S
Aluminum (standard) or steel interlock armored cables available
A P P L I C AT I O N S
Berk-Tek’s composite cables are suitable for all power limited applications where optical fibers are needed. Specific applications include (but not limited to):
Device
BENEFITS
Power over Ethernet (PoE+) length extension
Work Area Outlet
Multimode, single-mode, and GIGAliteTM fibers
Enables PoE+ equipment to be located more than 100 meters from the switch Cost savings versus installation of a new electrical outlet CL3R-OF/PLTC-OF allows cable to be installed in communications pathways Ease of installation Broad design selection allows for mix and match of copper and fiber components for specific networking applications Armor option adds crush resistance and protection from rodent attacks
CL3R-OF, wet and dry rated Aluminum or steel interlock armored designs available
Oil resistant designs available
Indoor/Outdoor dry water-blocked design www.berktek.com
COMPOSITE COPPER/FIBER CABLE
FIBER CHARACTERISTICS
(cross-sectional view)
Fiber Type
HDC002
At a Glance…
Multiple Loose Tube or Tight Buffer Fibers for Indoor/Outdoor Environments Multiple Stranded THWN or TFFN Copper Conductors Combining Control and Communications in One Cable, One Pathway Armor Option Adds Crush Resistance and Protection from Rodent Attacks
Effective Modal BW @ 850 nm
Overfilled Launch BW @ 850 nm
Attenuation @ 850 nm
Attenuation @ 1300 nm
Attenuation @1550 nm
Sheath Color
AB
OS1/2
NS*
NS*
NS*
0.7 dB/km
0.7 dB/km
Black
One Pathway. One Pull. One Solution.
CB
OM1
200 MHz-km
200 MHz-km
3.5 dB/km
1.0 dB/km
NS*
Black
GB
OM1
500 MHz-km
350 MHz-km
3.5 dB/km
1.0 dB/km
NS
Black
Introducing the Berk-Tek Composite Copper/Fiber all-in-one control and communications security cable. With this new cable solution and the proper conductor size, your security system can now be installed at well over 100 meters—up to several thousand feet—all while providing high-bandwidth data transfer speeds and the power you need to keep your security system up and running in areas where electrical access is not readily available.
ZB
OM2
500 MHz-km
500 MHz-km
3.5 dB/km
1.5 dB/km
NS
Black
LB
OM2+
950 MHz-km
700 MHz-km
3.0 dB/km
1.0 dB/km
NS
Black
EB
OM3
2000 MHz-km
1500 MHz-km
3.0 dB/km
1.0 dB/km
NS
Black
FB
OM4
4700 MHz-km
3500 MHz-km
3.0 dB/km
1.0 dB/km
NS
Black
XB
OM4+
4900 MHz-km
3675 MHz-km
3.0 dB/km
1.0 dB/km
NS
Black
Supports PoE+ to Extended Distances Ideal for IP Cameras, Wireless Access Points, and other ESS Devices
ISO-TIA Standard
*Not Specified
Illustrations enlarged for detail.
Min. Bend Radius
EXAMPLE PRODUCT LIST For more information on Berk-Tek’s new Composite Copper/Fiber security cable, call 1-800-BERK-TEK or visit www.berktek.com. Search Term: COMPOSITE
COMPOSITE COPPER/FIBER SECURITY CABLE
Part Number
Weight
Install.
Max. Distance
Long Term
PoE
Conductor Size
# Conductors
in.
mm
lb/kft.
kg/km
in.
cm
in.
cm
2
18 AWG
2
0.300
7.6
49
72
4.5
11.4
3.0
7.6
1000 304
HDRC002-002X12AWG
2
12 AWG
2
0.360
9.1
93
138
5.4
13.7
3.6
9.1
3850 1173 2500 762
LTRC06B012-002X18AWG
12
18 AWG
2
0.319
8.1
49
73
4.8
12.1
3.2
8.1
1000 304
LTRC012-002X12AWG
12
12 AWG
2
0.371
9.4
87
129
5.6
14.1
3.7
9.4
3850 1173 2500 762
OPRC06B012-002X18AWG
12
18 AWG
2
0.319
8.1
51
76
4.8
12.1
3.2
8.1
1000 304
OPRC012-002X12AWG
12
12 AWG
2
0.371
9.4
88
131
5.6
14.1
3.7
9.4
3850 1173 2500 762
300 lbs/1335 N 90 lbs/400 N -40ºC to +75ºC HDR = -10ºC to +70ºC LTR/OPR = -20ºC to +60ºC
Compression (crush) Impact Cable Flex Qualifications
220 N/cm 2 impacts at 5.88 N 500 cycles UL13, GR409, ICEA 696
ft.
PoE+
# Fibers
HDRC002-002X18AWG
Max Loading Install Max Loading Long Term Operating Temperature Installation Temperature
www.berktek.com
Diameter
m
ft.
m
650
198
650
650
198
198