201 1Buyer ’ sGui de
Rack Systems Standard Rack
Velocity™ Standard Pack
CPI’s Standard Rack provides direct support for panel mount equipment, such as patch panels and networking equipment and may be adapted with shelves to support computer server and data storage equipment.
The Velocity™ Standard Pack is an easy to use solution for managing equipment and cabling at the cross-connect. It includes one CPI Standard Rack, a concrete floor installation kit and a single or double-sided Velocity vertical cable manager packaged in one single carton.
• Supports up to 1,000 lb of equipment • RMU are marked and numbered on equipment mounting rails • EIA-310-D compliant #12-24 threaded equipment-mounting holes on 3” deep equipment mounting channels • UL Listed as a communications accessory • Includes assembly hardware and 50 each #12-24 mounting screws • Must be secured to building structure with Installation Kit Part Number
Description, H x W x D
55053-703
Standard Rack, 84”H x 19”W x 45U, Black
55053-708
Standard Rack, 108”H x 19”W x 58U, Black
55053-715
Standard Rack, 96”H x 19”W x 51U, Black
66353-703
6”D Standard Rack, 84”H x 19”W x 45U, Black
40604-003
Installation Kit, Concrete Floor, Zinc
• Rack supports up to 1,000 lb of equipment • (4) variations with a single-sided or double-sided cable manager in either 3.6”W or 6”W. Cable managers can be mounted on either side of the rack • Numbered rack-mount spaces on the standard rack are printed on the equipment mounting channels • Cable openings have rounded edges and align with rack-mount units providing installers with an easy way of positioning equipment in planned spaces • Cover snaps on and opens to right or left • Secure rack to building structure with Installation Kit Part Number
Description, H x W x D
57011-703
(1) Standard Rack, 45U x 19”EIA, UL, Black (1) Velocity Single-Sided Cable Manager, 3.6”W, Black (1) Rack Installation Kit for Concrete Floor, 1/2” Hardware, Zinc
57012-703
(1) Standard Rack, 45U x 19”EIA, UL, Black (1) Velocity Double-Sided Cable Manager, 3.6”W, Black (1) Rack Installation Kit for Concrete Floor, 1/2” Hardware, Zinc
57013-703
(1) Standard Rack, 45U x 19”EIA, UL, Black (1) Velocity Single-Sided Cable Manager, 6”W, Black (1) Rack Installation Kit for Concrete Floor, 1/2” Hardware, Zinc
57014-703
(1) Standard Rack, 45U x 19”EIA, UL, Black (1) Velocity Double-Sided Cable Manager, 6”W, Black (1) Rack Installation Kit for Concrete Floor, 1/2” Hardware, Zinc
Other sizes and colors available.
19” Rack Shelves
Grounding & Bonding
Shelves for 2-post Rack Systems are designed to hold miscellaneous equipment, test gears, and small peripheral equipment in a central location on 19”W racks, saving valuable space. Made of strong, lightweight aluminum, shelves hold various load capacities and most are UL Listed.
As part of a properly designed and installed IT infrastructure, CPI’s UL Listed Grounding and Bonding Products help protect today’s high-speed cabling systems by preventing transient voltage from damaging sensitive electronic equipment. Select form CPI’s comprehensive line of products promoting electrical safety throughout the network. Part Number
Description, H x W x D
3U x 19”EIA x 14.8” Single-Sided, 50 Lb Load, UL Listed, Black
40167-001
Two-Mounting Hole Ground Terminal Block 3/4”H x 1-1/2”W x 5/8” Hole Spacing, #14 AWG to 2/0
40108-719
4U x 19”EIA x 21.5” Double-Sided, 100 lb load, UL Listed, Black
13266-012
Grounding Bar, 12”L x 2”W x 1/4” thick
11504-719
5U x 19”EIA x 25.8” Double-Sided, Extra Deep, 150 lb load UL Listed, Black
40159-001
Ground Wire, No Lugs, #6 AWG, 100’L
40159-009
Ground Jumper, (1) Lug, #6 AWG, 9’L
5U x 19”EIA x 19.8” Double-Sided, Heavy-Duty, 200 lb load UL Listed, Black
40159-010
Equipment Ground Jumper Kit (2) Lugs, #6 AWG, 24”L
4U x 19”EIA x 17.5” Sliding Equipment Shelf, 100 lb load, Black
40161-072
Vertical Rack Busbar Kit, 72”L x 1/4” thick
Mounting Screws, #12-24, 50 Pack, Black
10610-019
Horizontal Rack Busbar Kit for 19” Racks
40172-001
Rack Ground Bar Kit, 78”L x .05” thick
Part Number
Description, H x W x D
40074-700
11164-719 11415-719 40605-005
Other sizes and colors available.
Other options available.
www.chatsworth.com www.accu-tech.com
Rack Systems QuadraRack® ServerFrame & QuadraRack® 4-Post Frame
Adjustable Rail QuadraRack® & Adjustable Rail ServerRack
Designed specifically for rack-mount servers, the QuadraRack® Server Frame offers the strength and stability of a cabinet, but in an open mounting system. Manufactured from aluminum and steel, the C-shaped channels with square holes and horizontal braces provide optimal torsional strength. Load rating 1000 lb.
Provides a sturdy, feature-rich solution for supporting rackmount network, computer server and data storage equipment in data centers, computer equipment rooms and other IT facilities. Both racks offer the strength and stability of an enclosure in an open four-post mounting system that provides easy access to equipment and cabling.
The QuadraRack® 4-Post Frame also offers the strength and stability of a cabinet in an open mounting system with unrestricted airflow and easy installation. Manufactured from aluminum with #12-24 threaded equipment mounting channels, the rack ships unassembled and has a load rating of 2000 lb.
• Available in three heights and two depths • Adjustable Rail QuadraRack™ has threaded mounting holes that speed installation of patch panels, fiber enclosures and network switches • Adjustable Rail ServerRack has squarepunched rails that permit mounting hardware changes to match specific equipment • Each RMU is marked and numbered. Front rails can be mounted to allow RMU numbering to start at the top or bottom of rack • Racks include a Top-Mount Cable Waterfall Tray with adjustable radius drops to allow easy sideto-side routing of cords and cables • The rear mounting rails adjusts in depth • UL Listed 60950 • Each rack supports up to 2200 lb.
• 19” EIA width • EIA-310-D Standard Universal 5/8” -5/8” -1/2” alternating hole pattern Part Number
Description, H x W x D
15053-703
ServerFrame, 7’H x 19”W x 29”D, 45U, Black
50120-703
4-Post Frame, 7’H x 19”W x 29”D, 45U, Black
50120-708
4-Post Frame, 9’H x 19”W x 29”D, 58U, Black
50120-715
4-Post Frame, 8’H x 19”W x 29”D, 51U, Black
Other sizes and colors available.
Part Number
Description, H x W x D
15252-703
Adjustable Rail QuadraRack, #12-24 Threaded Rails, Rack Depth 900 mm - 1050 mm, 45U, Black
15254-703
Adjustable Rail ServerRack, Square-Punched Rails, Rack Depth 900 mm - 1050 mm, 45U, Black
Other sizes and colors available.
Fixed QuadraRack Accessories ®
Adjustable Rail QuadraRack® & Adjustable ServerRack Accessories
Part Number
Description, H x W x D
16351-719
Heavy-Duty Fixed Shelf, 19”W x 29”D, Solid, Supports up to 200 lb, Black
Part Number
Description, H x W x D
16350-719
Heavy-Duty Fixed Shelf, 19”W x 29”D, Vented, Supports up to 200 lb, Black
15285-702
Equipment Support Rail, Supports 200 lb, Black
15245-703
Shelf, Solid, 27.62”D, Supports 200 lb, Black
Extra Heavy-Duty Sliding Shelf, 2U x 19”W x 26”D, Extends 24”, Supports up to 300 lb, Black
15255-703
Shelf, Vented, 27.62”D, Supports 200 lb, Black
15205-701
Cable Runway Mounting Bracket, Black
15286-003
Cable Guide Kit, 45U Racks, Black
15270-705
Solid Side Panel, Black
15330-701
Center Rail, 72”H, 38U, Square-Punched Rail, 1 Pair, Black
15335-701
Center Rail, 72”H, 38U, #12-24 Threaded Rail, 1 Pair, Black
12700-719 16358-719
Equipment Tie-Down Bracket, 3U x 19”W x 23”D, Black
35882-5A2
PowerWedge Controlled PDU, 250 Volts, 30 Amps, NEMA L6-30P Plug, 24 IEC60320 C-13 Receptacles
35883-5B2 Other options available.
PowerWedge Controlled PDU, 230 Volts, 32 Amps, IEC60309 (2P+E) Plug, 24 IEC60320 C-13 Receptacles
Other options available.
www.chatsworth.com www.accu-tech.com
Cable Management Evolution® Vertical Cable Manager Provides an engineered solution for managing high-density cabling applications on open two-post and four-post CPI Rack Systems, delivering increased performance to match the demands of data center applications. • Improved T-shaped cable guides decrease deflection when loaded with cables; especially important when deploying Cat 6a cable • Rounded edges on cable guides protect cables as they enter and exit the storage space • Door opens to the right or left • Rigid trough minimizes movement when installed on the end of a row of racks; solid construction with full rectangular base supports large bundles of heavy cables • Openings in the back of the single-sided and middle of the double-sided managers allow cables to pass easily front to rear • Fixed accessory panels on the single-sided and Movable Mid-Sections on the double-sided manager support various cable management accessories by dividing interior space and managing cable slack • Combination cable manager has rear cable rings with pin-open latches on back (no door/cover). Three large cable spools included with 10”, 12” & 15” wide managers. Part Number
Description, H x W x D
35511-703
7’H x 6”W x 13.2”D, g1 Single-Sided Manager, Black
35512-703
7’H x 8”W x 13.2”D, g1 Single-Sided Manager, Black
35513-703
7’H x 10”W x 13.2”D, g1 Single-Sided Manager, Black
35521-703
7’H x 6”W x 24.5”D, g2 Double-Sided Manager, Black
35522-703
7’H x 8”W x 24.5”D, g2 Double-Sided Manager, Black
35523-703
7’H x 10”W x 24.5”D, g2 Double-Sided Manager, Black
35571-703
7’H x 6”W x 20.2”D, g3 Combination Manager, Black
35572-703
7’H x 8”W x 20.2”D, g3 Combination Manager, Black
35573-703
7’H x 10”W x 20.2”D, g3 Combination Manager, Black
Available in 12”W & 15”W versions.
Evolution® Vertical Cable Management Accessories Fiber Segregation Kit - Creates a seperate pathway for fiber cables and patch cords inside the cable managers. Cable Lashing Bar Kit - Provides tie points for cables inside the cable managers. Cable Divider Bar Kit - Provides tie points for cables and divides the interior of the cable manager to create multiple pathways for cables. Solid Rear Panel Manager - Encloses the rear of the single-sided cable manager.
Evolution® Horizontal Cable Manager
Solid Mid Panel - Divides front and rear of the double-sided cable manager.
• Contoured front door with snap-hinges and longitudinal center feature contrasting aluminum finish • Three 2.12”W x 1.25”H (53 mm x 31 mm) edge-protected oval cable pass-through ports at the rear of the cable manager • Snap-on cover opens up or down
Solid Side Panel Manager - Covers the side of the double-sided cable manager located at the end of a row. Part Number
Description, H x W x D
35475-701
Fiber Segregation Kit, Black
35473-001
Cable Lashing Bar Kit, Black
35503-701
Cable Divider Bar Kit, Black
Part Number
Description, H x W x D
35501-702
Solid Rear Panel for 6”W g1 Manager, Black
35441-702
1U x 19”EIA x 8.2”D, Black
35497-702
Solid Mid Panel for 6”W g2 Manager, Black
35441-702
2U x 19”EIA x 8.2”D, Black
35502-702
Solid Side Panel for 7’H g2 Manager, Black
35441-703
3U x 19”EIA x 8.2”D, Black
35506-701
Floor Bracket, Black
Other sizes and options available.
www.chatsworth.com www.accu-tech.com
Cable Management Velocity™ Cable Management
MCS Master Cabling Section
Velocity™ Cable Management is an economical cable management solution for everyday use on open two-post and four-post CPI Rack Systems,
Use the MCS Master Cabling Section to organize large quantities of cable by providing frequent one rack-mount unit spacing of cable guides that align with rack spacing.
• Quick and easy tool-less snap together design takes approximately 3-5 minutes to unpack, assemble and install • Compact packaging is easy to ship, requires less storage space, reduces wastes and make cartons easier to handle • Larger cross-section on single-sided vertical managers provides more cable management space • Openings on the side of the manager align with each rack-mount unit
• SwitchGate Door/Cover is easily opened right or left • Double-Sided version has edge-protected pass through ports and vertical slots for straps • MCS-EFX is a larger, higher capacity version with cable openings sized to accomodate twice the capacity • 10”W MCS version and 10”W and 12”W MCS-EFX include (4) Cable Distribution Spools • Mounting hardware and doors are included Part Number
Description, H x W x D
30092-703
MCS, 84”H x 6”W x 8.08”D, Single-Sided, Black
30093-703
MCS, 84”H x 10”W x 8.08”D, Single-Sided, Black
30095-703
MCS, 84”H x 6”W x 16.2”D, Double-Sided, Black
30096-703
MCS, 84”H x 10”W x 16.2”D, Double-Sided, Black
40096-703
MCS-EFX, 84”H x 10”W x 21.2”D, Double-Sided, Black
40097-703
MCS-EFX, 84”H x 12”W x 21.2”D, Double-Sided, Black
Other sizes available.
CCS Combination Cabling Section Provides a vertical cable pathway in between equipment racks. Double-sided trough includes a closed front-side pathway for patch cords and an open rear-side pathway for premise cables. • Open cabling section in rear provides easy access and routes cable bundles feeding the back of patch panels • SwitchGate Door/Cover is easily opened right or left • CCS-EFX cable openings are sized to fit 48 patch cords • Mounting hardware and doors included Part Number
Description, H x W x D
Part Number
Description, H x W x D
30161-703
CCS for 3”D Racks, 84”H x 3.65”W x 12.24”D, Black
13901-703
Vertical, for 45U Rack, 80.5”H x 3.6”W x 9.7”D, Single-Sided, Black
30162-703
CCS for 3”D Racks, 84”H x 6”W x 12.24”D, Black
13902-703
Vertical, for 45U Rack, 80.5”H x 6”W x 9.7”D, Single-Sided, Black
30164-703
CCS for 6”D Racks, 84”H x 3.65”W x 12.24”D, Black
13904-703
Vertical, for 45U Rack, 80.5”H x 10”W x 9.7”D, Single-Sided, Black
30165-703
CCS for 6”D Racks, 84”H x 6”W x 12.24”D, Black
13905-703
Vertical, for 45U Rack, 80.5”H x 12”W x 9.7”D, Single-Sided, Black
40098-703
CCS-EFX, 84”H x 3.65”W x 14.61”D, Black
13911-703
Vertical, for 45U Rack, 80.5”H x 3.6”W x 16.4”D, Double-Sided, Black
40099-703
CCS-EFX, 84”H x 6”W x 14.61”D, Black
13912-703
Vertical, for 45U Rack, 80.5”H x 6”W x 16.4”D, Double-Sided, Black
Other sizes available.
13914-703
Vertical, for 45U Rack, 80.5”H x 10”W x 16.4”D, Double-Sided, Black
13915-703
Vertical, for 45U Rack, 80.5”H x 12”W x 16.4”D, Double-Sided, Black
13930-701
Horizontal, 1U x 19”EIA x 5.9”D, Single-Sided, Black
13930-702
Horizontal, 2U x 19”EIA x 5.9”D, Single-Sided, Black
13930-703
Horizontal, 3U x 19”EIA x 5.9”D, Single-Sided, Black
Universal Horizontal Cable Manager • Extra-wide and contoured cable guide fingers spaced 1.75” apart to separate cords • Snap-on covers open 180˚ up or down Part Number
Description, H x W x D
30139-719
1U x 19”EIA x 4.9”D, Black
30130-719
2U x 19”EIA x 5.1”D, Black
30131-719
3U x 19”EIA x 5.1”D, Black
Other sizes available.
www.chatsworth.com www.accu-tech.com
Cable Runway and Tray Cable Runway Use Cable Runway to create cable pathways between equipment racks/cabinets and the entry/exit points in telecommunication facilities. Support from the floor, wall, rack/cabinet or ceiling every 5’ of span. Various types of supports are available. Identify each component by matching the letter in the graphic to the column (key) in parts list. • Easy to cut and assemble to form pathways for network cables in equipment rooms • Standard 10’L straight sections make planning easy • E-Bends, Radius Bends, Corner Brackets and Radius Drops form smooth turns to maintain proper cable bends • Pathway components bolt together with simple splices • Support from wall, ceiling, floor and the tops of racks and cabinets • Excellent load-bearing capacity for network cables Note: Other sizes and colors available: contact your local Accu-Tech representative for part numbers and information.
Part Number
Description, H x W x D
11237-701
Floor Support Stand, 8-10”H
Key A
11241-712
Floor Support Channel, 3-8”H, 12”W, with anchors
B
10724-712
Inside Radius Bend, 1.5”H x 12”W x 12.5” Dia.
C
10608-001
Vertical Wall Brackets, 1 Pair
D
10642-001
End Caps, 1 Pair
E
12101-701
Radius Drop, Side Stringer, 10.25”W
F
12100-712
Radius Drop, Cross Member, 11”W
alt F
11421-712
Wall Angle Support for 12”W Cable Runway
G
11302-001
Junction Splice Kit (L or T connection)
H
11746-712
Triangular Wall Bracket for 12”W Cable Runway
I
11301-001
Butt-Splice Kit (end-to-end connection)
J
10822-712
E-Bend, 1.5”H x 12”W x 27” Dia.
K
11310-003
Threaded Ceiling Support Kit, 5/8 Rod
L
10557-003
Beam Clamp, 5/8-11 Threaded Rod
M
12362-712
Center Support Kit for 12”W Cable Runway
N
10723-712
Outside Radius Bend, 1.5”H x 12”W x 12.5” Dia.
O
11959-724
Corner Bracket, 25” x 25”
P
10506-716
Elevation Kit for Cabinets, 4-6”H
Q
10595-712
3”D Rack-to-Runway Mounting Plate
R
10506-706
Elevation Kit for Racks, 4-6”H
R
10684-701
Pipe Stand, 2” Dia., 7’H
S
10250-712
Universal Cable Runway, 1.5”H x 12”W x 9’-11.5”L
T
11309-001
Foot Kit
U
www.chatsworth.com www.accu-tech.com
Cable Runway and Tray Part Number
Description, H x W x D
34811-520
OnTrac Wire Mesh Cable Tray, 2”H x 20”W x 10”L
A
34821-520
OnTrac Wire Mesh Cable Tray, 4”H x 20”W x 10”L
A
34831-520
OnTrac Wire Mesh Cable Tray, 6”H x 20”W x 10”L
A
34738-501
Standard Splice Kit, Pack of 50
B
• Standard 10’L U-shaped sections are available in three heights and eight widths • Pathway components bolt together with simple splices; cut and form tray to create turns • Tray is UL Classified for suitability as an equipment grounding conductor • Excellent load bearing capacity and protection for network cables • Support from wall, ceiling, floor and the tops of racks and cabinets
34739-501
Splice Bar Kit, Pack of 50
B
34728-501
Splice Washer and Bolt Kit, Pack of 50
B
34731-501
Edge Hanger, Pack of 50
C
34729-520
Center Support Bracket, 20”W
D
34730-520
Trapeze Support Bracket, 20”W
E
34735-520
Wall-Mount Angle, 20”W
F
Other sizes and colors available: Contact your local Accu-Tech representative for part numbers and information.
34733-520
Triangle Support Bracket, 20”W
G
34734-520
L-Support Bracket, 20”W
H
34740-501
90˚ Splice Bar Kit (one T or two 90˚ intersections)
I
34737-501
Pedestal Clamp Bracket (on L-Support)
J
34737-502
Pedestal Clamp Support Kit
K
34736-583
Under Floor Support, 3”H x 8”W
L
OnTrac® Wire Mesh Cable Tray System Use OnTrac® Wire Mesh Cable Tray to create point-to-point pathways for network cabling in data centers, network equipment rooms and office spaces.
Key
Note: Zinc electroplate finish.
www.chatsworth.com www.accu-tech.com
Wall-Mount Racks & Cabinets Standard Swing Gate Wall Rack
EasySwing Wall-Mount Rack
Provides wall-mounted support for rack mount telecommunications and network equipment with ease of access to the rear of equipment, where premise space is limited. Add Cable Management Rings to provide a complete connection between the wall and rack-mounted equipment. 100 lb load but can be increased to 150 lb load with a Heavy-Duty Swing Gate Kit.
Provides wall-mounted support in a cost-effective 19”W EIA swing-gate rack for mounting network, communications and security equipment where space is limited.
• 100 lb equipment load, open or closed • Pivots open to right or left, latches in closed position • UL Listed Part Number
Description, H x W x D
11790-718
Swing Gate, 29”H x 19”W x 18”D, 13U, Black
11791-718
Swing Gate, 43”H x 19”W x 18”D, 21U, Black
11807-718
Swing Gate, 53.5”H x 19”W x 18”D, 27U, Black
11792-718
Swing Gate, 78”H x 19”W x 18”D, 41U, Black
11799-001
Cable Rings, Set of 6, Black
12795-701
Heavy Duty Swing Gate Kit, Black
Other sizes and colors available.
Wall Bracket with Cover The Wall Bracket with Cover allows 2U or 4U of 19”W EIA rack-mount equipment to be securely wall-mounted inside or outside of the equipment room. • Low profile design projects only 4” or 8” from the wall • Removable cover protects equipment • Open ends and vents along the sides provide ventilation for equipment • Includes tapped #12-24 equipment mounting rails for 19”W EIA-310-D compliant rack-mount equipment, includes #12-24 equipment mounting screws • Mounting rails adjust in depth in 1.5” increments; recess rails to cover cable connections on the front of equipment; maximum usable depths - 19”, 17.5” or 16” • Internal equipment space: 2U or 4U x 19”EA x 19”D • Supports 50 lb of equipment
• Supports 85 lb of equipment • Opens 180˚ to right or left • Locking latch pin scures gate in closed position • 19”EIA threaded equipment mounting rails • Ships flat, folds open to mount on wall Part Number
Description, H x W x D
13602-718
EasySwing, 24.5”H x 19”W x 18”D, 11U, Black
13604-718
EasySwing, 38.5”H x 19”W x 18”D, 19U, Black
13608-718
EasySwing, 51.5”H x 19”W x 18”D, 26U, Black
Other sizes and colors available.
Universal Swing Gate Rack This full-featured swing gate rack offers 150 lb load handling capacity, easy assembly and built-in cable management capabilities. • 35”, 20U usable mounting height • 12” or 18” usable depth • Dual locking latches keep gate securely closed • Built-in cable management with nine cable pass-through ports • Made of strong, lightweight aluminum • Easy assembly • Supports 150 lb of equipment Part Number
Description, H x W x D
11347-719
Universal, 35”H x 19”W x 12”D, 20U, Black
11348-719
Universal, 35”H x 19”W x 18”D, 20U, Black
Other colors available.
Fixed Wall-Mount Equipment Rack Similar to the Standard Swing Gate Wall Rack but with fixed equipment mounting channels. Fixed Wall-Mount Equipment Rack doubles the load bearing capacity to 200 lb. Use to support heavier switches and equipment. • Supports 200 lb of equipment • Supports single- and double-sided shelves • Ships unassembled with installtion hardware • Tapped with #12-24 roll-formed threads
Description, H x W x D
Part Number
Description, H x W x D
84101-700
2U, 4”H x 20”W x 22”D, Black
11960-718
Fixed, 24.5”H x 19”W x 18”D, 13U, Black
84102-700
4U, 8”H x 20”W x 22”D, Black
11961-718
Fixed, 38.5”H x 19”W x 18”D, 21U, Black
11962-718
Fixed, 73.5”H x 19”W x 18”D, 41U, Black
11799-001
Cable Rings, Set of 6, Black
Part Number
Other sizes and colors available.
www.chatsworth.com www.accu-tech.com
Wall-Mount Racks & Cabinets CUBE-iT PLUS® Cabinet System
ThinLine II Wall-Mount Cabinet
A series of wall-mounted and floor-supported enclosures designed to secure network or security equipment. The cabinets are copper and fiber ready and feature easy access to the front or rear of the cabinet.
This space-saving wall cabinet safely secures 19” rackmount network equipment with minimal intrusion into the room making it perfect for tight areas or high-traffic places.
Creates a secure wall-mounted storage location for network and security equipment. Provides easy access to front and rear of equipment. • Cabinet and front door swing open to provide easy access to the front door and rear of equipment • Door and rear panel lock and are keyed alike • Includes one pair of adjustable depth 19” EIA-310-D equipment mounting rails with threaded #12-24 equipment mounting holes • Rear panel has pre-punched knockouts for 1/2”, 3/4”, 2-1/2” and 3” conduit, cable tie points and locations for accessory brackets • Wall-mount cabinets support up to 200 lb of equipment and are UL Listed • Floor mount cabinets support up to 1000 lb
• Includes two pair of 19” EIA-310-D equipment mounting rails with threaded #12-24 equipment mounting holes • Position of mounting rails is adjustable • Removable top panel for direct access to equipment • Low profile design, only 12” from wall • Ships fully assembled with mounting hardware • Supports up to 100 lbs. of equipment Part Number
Description, H x W x D
13050-711
Wall Cabinet, 2U, 78”H x 26”W x 5”D, Black
13050-721
Wall Cabinet, 2U, 36”H x 26”W x 5”D, Black
13050-712
Wall Cabinet, 4U, 26”H x 26”W x 8.5”D, Black
13050-722
Wall Cabinet, 4U, 36”H x 26”W x 8.5”D, Black
13050-713
Wall Cabinet, 6U, 26”H x 26”W x 12”D, Black
13050-723
Wall Cabinet, 6U, 36”H x 26”W x 12”D, Black
Other colors available. Order wall installation hardware separately.
Wall-mount Cabinet
CUBE-iT PLUS Cabinet System and ThinLine II Cabinet Accessories Wall-mount, Floor mount Cabinet Part Number
Description, H x W x D
11890-724
Wall Cabinet, 12U, 24”H x 24”W x 18”D, Black
11840-724
Wall Cabinet, 12U, 24”H x 24”W x 24”D, Black
11996-724
Wall Cabinet, 12U, 24”H x 24”W x 30”D, Black
11890-736
Wall Cabinet, 18U, 36”H x 24”W x 18”D, Black
Part Number
Description
11840-736
Wall Cabinet, 18U, 36”H x 24”W x 24”D, Black
12804-701
Fan Kit, 100 CFM, 115 VAC, 5’L Power Cord
11996-736
Wall Cabinet, 18U, 36”H x 24”W x 30”D, Black
12820-701
Power Strip, Non-Surge, 115 VAC/15A, NEMA 5-15P
11890-748
Wall Cabinet, 26U, 48”H x 24”W x 18”D, Black
12820-703
Power Strip, Surge-Protected, 115 VAC/15A, NEMA 5-15P
11840-748
Wall Cabinet, 26U, 48”H x 24”W x 24”D, Black
11837-701
Horizontal Wire Management Bar
11996-748
Wall Cabinet, 26U, 48”H x 24”W x 30”D, Black
12803-701
Universal Light Kit, 115 VAC, NEMA 5-15P plug
13491-760
Wall/Floor Cabinet, 33U, 66”H x 27.3”W x 18”D, Black
13485-760
Vertical Cable Manager for 60”H cabinets only
13492-760
Wall/Floor Cabinet, 33U, 66”H x 27.3”W x 24”D, Black
For ThinLine II Wall-Mount Cabinet
13493-760
Wall/Floor Cabinet, 33U, 66”H x 27.3”W x 30”D, Black
13051-001
Fan for 4U and 6U Cabinet, 65-120 CFM, 115 VAC
13491-772
Wall/Floor Cabinet, 40U, 78”H x 27.3”W x 18”D, Black
13051-002
Fan for 2U Cabinet, 36-49 CFM, 115 VAC
13492-772
Wall/Floor Cabinet, 40U, 78”H x 27.3”W x 24”D, Black
12934-001
Surge Suppressed Duplex Receptacle, 125 VAC, 15A
13493-772
Wall/Floor Cabinet, 40U, 78”H x 27.3”W x 30”D, Black
12955-719
Fiber Slack Manager Panel, Black
Other colors and door styles available. Maximum depth of rack-mount equipment should be 6” less than cabinet depth to allow full access to the rear of the cabinet.
13501-001
12804-701
Other accessories available
www.chatsworth.com www.accu-tech.com
Cabinet Systems F-Series TeraFrame® Cabinet System The F-Series TeraFrame® Cabinet System is infinitely configurable and can be personalized to meet specific data center needs. Designed to solve thermal issues in the data center and lessen the need for expensive cooling equipment, the F-Series Cabinet System offers patent-pending advanced thermal contol with no single point of failure, thus delivering a Tier 4 solution for high-density applications and protecting equipment. A variety of CPI Passive Cooling Solutions are available to achieve maximum cooling. • Available in three widths, 12 heights and 17 depths, 612 total sizes • Choose top panels, side panels and doors to match your thermal management and security needs • Optional Vertical Exhaust Duct guides hot exhaust air from the top of the cabinet to the space above the drop ceiling • Includes two pair of adjustable depth equipment mounting rails to provide front and rear support for 19”EIA rack-mount equipment • UL Listed • Load Rating: 2,500 lb for 23.6”W; 2,000 lb for 27.6”W & 31.5”W cabinets Use the part number configurator below to create a custom TeraFrame. Choose the Height, Width, Depth, Rail Style, Front Door, Rear Door, Latch, Color, Top Panel Style, and Side Panel Style. Example part number: FF2J-112A-C22
F 1. Height Cabinet in mm 46.8 67.8 78.3 80.0 81.8 83.5 85.3 87.0 88.8 90.5 92.3 94.0
Frame in mm
1189 1722 1989 2032 2078 2121 2167 2210 2256 2299 2344 2388
46.6 67.6 78.1 79.9 81.6 83.4 85.1 86.9 88.6 90.4 92.1 93.9
2. Width Cabinet in mm 23.6 27.6 31.5
600 700 800
1184 1717 1984 2029 2073 2118 2162 2207 2250 2296 2339 2385
Vertical Exhaust Duct
35.3 36.3 37.3 38.2 39.2 40.2 41.2 42.2 43.2 44.2 45.1 46.1 47.1 48.1 49.1 50.1 51.0
897 922 947 972 997 1022 1047 1072 1097 1122 1147 1172 1197 1222 1247 1272 1297
19” 19” 19”
FD
RD
L
23.6 27.6 31.5
28.6 29.6 30.6 31.5 32.5 33.5 34.5 35.5 36.5 37.4 38.4 39.4 40.4 41.4 42.4 43.3 44.3
-
C
TP SP 0 1 2 3 4
U 24 36 42 43 44 45 46 47 48 49 50 51
Rails in mm
1 2
W D - R
A B C D E F G H J K L M
0 2 4 5 6
726 751 776 801 826 851 876 901 926 951 976 1001 1026 1051 1076 1101 1126
600 700 800
C D E F
1 2 3 A B C D E F K N
Frame in mm 31.5 32.5 33.5 34.4 35.4 36.4 37.4 38.4 39.4 40.4 41.3 42.3 43.3 44.3 45.3 46.3 47.2
10. Side Panel Style None Solid, 1 each Solid, 2 each Vented, 1 each Vented, 2 each
9. Top Panel Style None Network, 4 Cable Openings Server, 2 Cable Openings Vertical Exhaust Duct System, 20”-34”H (508 mm-863 mm) Vertical Exhaust Duct System, 34”-60”H (863 mm-1523 mm)
Note: Use options 5 & 6 on 41.3”D (1050 mm) to 47.2”D (1200 mm) cabinets
Frame in mm
EIA
3. Depth Cabinet in mm
H
800 825 850 875 900 925 950 975 1000 1025 1050 1075 1100 1125 1150 1175 1200
4. Rail Style Square-Punched, 2 Pair Tapped, #12-24, 2 Pair
A B C D E F G H J K L M N P R T U
0 1 2 3
8. Color Black Signature Blue Glacier White Steel Gray
7. Latches (Door) Single-Point, Slam Latch, Keyed Lock Single-Point, Cam Latch, Keyed Lock Two-Point, Cam Latch, Keyed Lock Single-Point, Cam Latch, Combo Lock Two-Point, Cam Latch, Combo Lock Single-Point, Electronic Keypad Lock Single-Point, Slam Latch, Combo Lock None (use when NO DOORS selected)
6. Rear Door None Single, Solid Metal Single, Perforated Metal Double, Perforated Metal
Note: Double door requires a two-point latch (C) or (E), see latches above.
0 1 2 3
5. Front Door None Single, Perforated Metal Single, Solid Lexan® Single, Solid Metal
www.chatsworth.com www.accu-tech.com
Cabinet Systems F-Series TeraFrame® HD Cabinet System The F-Series TeraFrame® HD Cabinet System is designed for safe transportation of up to 3,000 lb of electronic equipment from a factory integration site direct to the customer’s datacenter. Every cabinet includes two pairs of sliding adjustable mounting rails, heavy duty casters with roller bearings for superior long-term performance under load, a shock pallet and a re-usable cushioned carton for protection during shipment. • Available in 600 mm width, 3 heights and 2 depths • Provides front and rear support for 19”W EIA equipment and shelves with adjustable depth mounting rails • Includes leveling feet, casters and grounding and bonding kit • Can be ordered with Server top panel or Vertical Exhaust Duct • Heavy-duty welded steel and bolted aluminum frame construction • Load Rating: 3,000 lb of equipment (static or dynamic) Part Number
Description, H x W x D
FHD-C1M-113B-C42
82.5”H x 23.6”W x 42.3”D, 42U, Server Top Panel, Black
FHD-C1U-113B-C42
82.5”H x 23.6”W x 47.2”D, 42U, Server Top Panel, Black
FHD-C1U-111B-C52
82.5”H x 23.6”W x 47.2”D, 42U, with Vertical Exhaust Duct, Black
16280-C01
Unloading Ramp for safe removal of cabinet from shock pallet
16279-C01
Bolt Down Kit, to securely anchor cabinet
Note: Other sizes and colors available.
N-Series TeraFrame® Network Cabinet System The N-Series TeraFrame® Network Cabinet provides a complete storage solution specifically designed to support high-density, high performance modular network switches requiring side-to-side airflow. • Available in 10 heights and 11 depths • Optional Network Switch Exhaust Duct, a Passive Cooling® Solution, guides hot exhaust air from the side of the cabinet to the rear door • Offset doors and side panels provide easy access to equipment and extra interior space for managing cables • Includes two pair of equipment rails to provide front and rear support for 19”EIA rack-mount equipment • Cisco compatible for housing Catalyst 6500E and MDS 9500 Series of products • Juniper EX8208 and EX8216 Ethernet Switch compatible • Load Rating: 2,500 lb of equipment Part Number
Description, H x W x D
NF0K-113C-C42
83.5”H x 31.5”W x 44.2”D, 45U, No Duct, Black
NF1K-113C-C42
83.5”H x 31.5”W x 44.2”D, 45U, Includes Duct, Black
NF2K-113C-C42
Recommended for Cisco® 6506, 6509, 6513 & 9509 Switches
NF3K-113C-C42
Recommended for Cisco® 9513 Switches
NF4M-113C-C42
Recommended for Juniper EX8208 or EX8216 Switches
Note: Other sizes and colors available.
CPI Fiber Management for the N-Series TeraFrame Cabinet Part Number
Description
34719-C05
Fiber Trunk Cable Manager, for 45U Cabinet, Black
34707-C05
Vertical Furcation Bracket, for 45U Cabinet, Black
34701-C05
Universal Accessory Rail, for 45U Cabinet, Black
Network Switch Exhaust Duct guides hot exhaust air from side of network switch to rear door of cabinet.
Note: Other acessories available.
www.chatsworth.com www.accu-tech.com
Cabinet Systems GF-Series GlobalFrame™ Cabinet The GF-Series GlobalFrame™ Cabinet System is an easy-to-use, cost-effective computer and network equipment storage solution with high load ratings and a wide variety of thermal, power and cable management accessories to ensure a complete solution for your application. • Available in three widths, three heights and four depths; 30 standard sizes • Available in two configurations to support front-to-rear of front-to top airflow • An optional Vertical Exhaust Duct guides air from the top of the cabinet to the space above the drop ceiling • Includes two pairs of adjustable depth equipment rails to provide front and rear support for 19”EIA rack-mount equipment • UL Listed • Supports up to 3,000 lb of equipment on leveling feet Part Number
Description, H x W x D
GF-1A320
42U, 79.3”H x 23.6”W x 41.3”D, 3000 lb Capacity, Black
GF-1A420
42U, 79.3”H x 23.6”W x 47.2”D, 3000 lb Capacity, Black
GF-1B320
42U, 79.3”H x 29.5”W x 41.3”D, 3000 lb Capacity, Black
GF-1B420
42U, 79.3”H x 29.5”W x 47.2”D, 3000 lb Capacity, Black
GF-2A320
42U, 84.5”H x 23.6”W x 41.3”D, 3000 lb Capacity, Black
GF-2B320
42U, 84.5”H x 29.5”W x 41.3”D, 3000 lb Capacity, Black
GF-3A320
48U, 89.8”H x 23.6”W x 41.3”D, 3000 lb Capacity, Black
GF-3A420
48U, 89.8”H x 23.6”W x 47.2”D, 3000 lb Capacity, Black
GF-3B320
48U, 89.8”H x 29.5”W x 41.3”D, 3000 lb Capacity, Black
GF-3B420
48U, 89.8”H x 29.5”W x 47.2”D, 3000 lb Capacity, Black
Other sizes and options available.
M-Series MegaFrame® Cabinet The M-Series MegaFrame® Cabinet System is a bolted aluminum cabinet that supports a vast array of potential applications. The cabinet is available in a variety of heights, widths and depths to meet the most stringent demands. This cabinet allows the user to select mounting rails to accommodate a variety of rack-mount equipment. • Available in three heights, two widths and four depths • Rack-mount unit (U) marks simplify equipment installation • Avaliable with a choice of tapped #12-24, square-punched SUN® or IBM® rails • All vertical mounting rails are available in half lengths • Bolted construction, delivers fully or partially assembled • UL Listed • Load Rating: 2,000 lb of equipment Part Number
Description, H x W x D
M1033-742
84.9”H x 27.3”W x 33.6”D, 45U x 19”EIA x 30”D, Black
M1053-742
84.9”H x 27.3”W x 39.6”D, 45U x 19”EIA x 36”D, Black
M1043-742
84.9”H x 27.3”W x 42.6”D, 45U x 19”EIA x 39”D, Black
Note: Cabinets listed have square-punched mounting rails, single-perforated front and rear doors, single-point latches with keyed locks, solid top panel with four cable pass-through ports and two solid side panels. Other styles, sizes and colors available.
www.chatsworth.com www.accu-tech.com
Cabinet Systems Shelves for Cabinet Systems
Power Distribution Units (PDUs) for Cabinet Systems CPI’s Power Distribution Units (PDUs) simplify power distribution into racks and cabinets by providing real-time power monitoring to help track power usage across the entire enterprise. The listed Controlled PDU models integrate with CPI’s Scalable Enterprise Management Application (SEMA) software to provide switched outlets for remote power cycling and optional by-outlet current monitoring. Controlled PDUs include circuit breakers, current meters, digital displays, network connection, temperature and humidity sensor connection and by-outlet monitoring and control. SEMA-compatible.
Part Number
Description, H x W x D
13517-701
Rack-Mount Cable Shelf, 1U x 19”W, for cabinets equipped with Air Dam Kit to provide front-to-back airflow
11914-719
Sliding Shelf, 2U x 19”W x 32”D, Supports up to 160 lb, Black
11913-719
Sliding Vented Shelf, 2U x 19”W x 32”D, Supports up to 160 lb, Black
12610-719
Fixed Vented Shlef, 1U x 19”W x 20” to 36”D, Supports up to 100 lb, Black
Part Number
Description
13380-729
LCD Monitor and Shelf, 4-Post, 2U x 19”W, Includes 17” LCD Monitor
35822-583
13480-719
Keyboard and Tray, 4-Post, 1U x 19”W, Includes Keyboard with Touch Pad
Vertical, 70.5"H, for F-Series TeraFrame Cabinet, Single-phase, 250 VAC, 30 A, NEMA L6-30P plug, 24 IEC C13 outlets and 4 IEC C19 outlets
35812-551
Vertical, 70.5"H, for F-Series TeraFrame Cabinet, Three-phase, 250 VAC, 30 A, NEMA L15-30P plug, 24 IEC C13 outlets
35822-5C3
Vertical, 70.5"H, for GF-Series GlobalFrame Cabinet, Single-phase, 250 VAC, 30 A, NEMA L6-30P plug, 24 IEC C13 outlets and 4 IEC C19 outlets
35812-5B1
Vertical, 70.5"H, for GF-Series GlobalFrame Cabinet, Three-phase, 250 VAC, 30 A, NEMA L15-30P plug, 24 IEC C13 outlets
35941-132
Temperature & Humidity Sensor
Other sizes and colors available.
Thermal Accessories for Cabinet Systems CPI Passive Cooling® Solutions
Other power configurations available.
PowerScope In-Line Meter
13571-002
35085-C00
Part Number
Description
34370-C00
Vertical Exhaust Duct for F-Series TeraFrame, 20”-24”H
34370-C01
Vertical Exhaust Duct for F-Series TeraFrame, 34”-60”H
34570-C00
Airflow Director for F-Series TeraFrame Cabinets
34573-000
Rear Door Sealing Kit for F-Series TeraFrame Cabinets
34522-C05
Air Dam Kit for 45U F-Series TeraFrame Cabinets
35085-C00
Bottom Panel Kit, for 31.5”D frame, F-Series TeraFrame Cabinets
13571-002 34620-C01 34537-000
KoldLok® Raised Floor Integral Grommet, 11”W x 1-5/8”H x 8-1/4”D, 10 Pack, Black Network Switch Exhaust Duct Panel for N-Series TeraFrame Cabinet, 2U to 3U, Black Snap-In Filler Panels for Cabinets with square-punched rails, 1U x 19”W, Black
25130-703
Bottom Panel Kit for GF-Series GlobalFrame Cabinet, 600 mm W
25150-701
Airflow Director for GF-Series GlobalFrame Cabinet, 600 mm W
25190-001
Cable Port Brush Kit for GF-Series GlobalFrame Cabinets
The PowerScope In-Line Meter lets you upgrade basic and metered PDUs with an in-line ammeter that features network-based current monitoring to track power usage. Combine PowerScope with basic or metered PDUs, SEMA software and CenterLine or CenterBridge for real-time enterprise-wide IP-based power monitoring the entire enterprise. The PowerScope In-Line Meter includes digital displays on single-phase models, network connection, temperature and humidity sensor connection and network current monitoring. SEMA-compatible.
Part Number 35991-411 35992-421 35993-404
Description Single-phase, 250 VAC, 30 A, NEMA L6-30P plug, NEMA L6-30R connector Dual-input, Single-phase, 250 VAC, 30 A, NEMA L6-30P plugs, NEMA L6-30R connectors Three-phase, 250 VAC, 30 A, NEMA L15-30P plug, L15-30R connector
Other options available.
www.chatsworth.com www.accu-tech.com
Enterprise Infrastructure Solutions Scalable Enterprise Management Application (SEMA) Featuring a graphical display with an intuitive web-based interface that shows map-, room- and rack-level views of your data centers, SEMA provides a single interface for access to rack-mount computers and switches and permits the storage of critical information about each device in a searchable, centralized database to track assets across the entire enterprise. SEMA software provides temperature, humidity and per outlet power monitoring with current-usage reporting and power cycling when used with SEMA-compatible, controlled CPI PDUs. The software permits you to associate CenterLine or CenterBridge and controllable PDUs with individual racks and devices so you can measure power use by device. SEMA is required for operating CenterLines and CenterBridges. • Provides enterprise-wide infrastructure management including KVM switching, asset management and power monitoring • Use with CenterLine, CenterBridge, SEMA-compatible Monitored and Controlled PDUs and PowerScope In-Line Meter • Intuitive web-based interface with map-, room- and rack-level view of data centers • Provides browser-based access to computers and network switches attached to CenterLines and CenterBridges • Stores critical information in a centralized database • Provides temperature, humidity and current monitoring • Provides room-level, per cabinet available RMU, current use and temperature views to assist with planning Contact CPI Tech Support for ordering assistance.
CenterLine CenterLine provides keyboard, video and mouse (KVM) switching for up to 42 devices; add additional KVM ports as required. Used with the SEMA software, CenterLine provides enterprise-wide KVM switching and asset management from a single web-based interface. CenterLine offers a vertical panel with 42 positions for Server Interface Module (SIM) cards, as well as four user interface module card positions for Local Interface Module (LIM) cards and Remote Interface Module (RIM) cards. • Scalable, 42-port keyboard, video and mouse (KVM) switch • Supports connections for up to 42 devices; add KVM ports (SIM cards) as required • Allows up to four users to simultaneously view different port connections; add one LIM or RIM card per user • Integrates with CPI’s SEMA software to provide web-based computer access • Local access to connected computers from a separate CenterView KVM Console using a LIM card Part Number
Description
35900-102
CenterLine, includes 10 SIM cards, 1 RIM card, 1 LIM card
35900-001
SIM card (one KVM switch port)
35900-002
LIM card (one CenterView KVM Console connection)
35900-003
RIM card (one network user interface card)
35901-214
SIM Cable with video, PS/2, USB and serial connections, 4'L
35901-234
SIM Cable with video, USB and serial connections, 4'L
35901-224
SIM Cable with serial connection, 4'L
35901-112
LIM Cable (LIM card to CenterView), 12'L
Scalable KVM over IP switch used with SEMA software to provide up to four users access to up to 42 devices
www.chatsworth.com www.accu-tech.com
Enterprise Infrastructure Solutions CenterBridge CenterBridge is an eight-port keyboard, video and mouse (KVM) switch and controllable PDU that uses only 1U of space to support up to eight devices. Combine CenterBridge with CPI’s SEMA software as part of an enterprise KVM switching solution to provide enterprise switching, asset management and power monitoring from a single web-based interface. • Rack-mount 1U x 19”EIA x 21"D • Eight-port keyboard, video and mouse (KVM) switch and eight-outlet controlled PDU • Supports connections for up to eight devices using SIM cables • Integrates with CPI’s SEMA software to provide web-based computer access and power monitoring • Local access to connected computers from a separate CenterView KVM Console Part Number
Description
35940-802
CenterBridge, includes 8 SIM cards, 1 RIM card, 1 LIM card
35901-214
SIM Cable with video, PS/2, USB and serial connections, 4'L
35901-234
SIM Cable with video, USB and serial connections, 4'L
35901-224
SIM Cable with serial connection, 4'L
35901-112
LIM Cable (LIM card to CenterView), 12'L CenterBridge combination KVM over IP switch and Controlled PDU and CenterView KVM Console shown installed in FSeries TeraFrame Cabinet System
CenterView KVM Console CenterView KVM Console is a combination LCD flat panel monitor, keyboard and touch pad console that provides a single set of peripherals for accessing computer or data storage equipment. The CenterView KVM Console uses less rack-mount space than separate rack-mount LCD panels and keyboard trays, saving valuable rack-mount space for server, storage and switch equipment. Use CenterView with a CenterLine, CenterBridge or another KVM switch to access multiple devices. • Rack-mount 1U x 19”EIA x 16"D • Combination LCD flat panel monitor, keyboard and touch pad • Folding laptop-style design uses only 1U of space • Stores in the closed position to protect the screen when not in use • Attaches directly to equipment or a KVM switch Part Number
Description
35920-001
CenterView KVM Console
Contact your local Accu-Tech representative for part numbers and information.
www.chatsworth.com www.accu-tech.com