Hoffman Wall-Mount Cabinets and Racks by Accu-Tech

Get the Hoffman Advantage

Information technology today must go everywhere the work is— including tight spaces, high traffic areas and challenging environments.

Protect your electronics investment with space-saving solutions from Hoffman. In schools, factories, retail outlets and government centers—anywhere full-sized floor cabinets could block traffic or airflow—wall-mount cabinets from Hoffman combine easy access with flexible, durable, high-quality protection. Wall-mount cabinets are perfect to secure network wiring, hubs, concentrators, patch panels and audio/video equipment. Consider wall-mount cabinets as an ideal solution for small networks—where larger data cabinets may be too large. Get the solution that meets your requirements by choosing from the industry’s widest array of wall-mount cabinets, precision-engineered to the toughest standards. Then select from our full line of accessories and extensive modification options. That’s the Hoffman advantage—selection, quality and performance. FEATURES INCLUDE: • Equipment mounting hardware

• UL, NEMA, CSA, IP rated

• Safety glass for greater clarity, strength and scratch resistance than plexiglass

• Cable tie-down slots to ease cable management

• Easy one-person mounting • Left- and right-hinged doors for greater accessibility

• Optimum airflow for cooling • RoHS compliant • Generous knockouts for cable exit and entry

UL and NEMA ratings certify levels of protection. Hoffman is one of the only DataCom cabinet suppliers that designs and tests cabinets to meet the requirements of Underwriters Laboratories. UL, an independent organization, provides strict design parameters and defined telecommunications equipment testing and technology protection solutions to ensure proper performance. Using UL listed products ensures consistent performance in protecting sensitive telecommunications and industrial equipment. Consult your Hoffman sales representative for further information on applying these ratings to your installation.

Learn more. Contact your Hoffman sales representative or visit our online catalog at hoffmanonline.com 2 2

increased load capacity To 250-500 lbs New Sizes: 28" Wide and 30" Deep

NEW

AccessPlus®II Type 1 Double-hinged Wall-mount Cabinet Features: • Tinted safety glass for greater clarity, strength and scratch resistance than plexiglass • Latch-free sides permit flush-mount installations in tight spaces and corners • Gland plate models accommodate pre-wired patch panel installation • Cable tie-down slots ease cable management • Easy one-person mounting • Vertical cable manager included with 28" wide cabinets

Gland plate option is great for retrofits

AccessPlus II Type 1 Double-hinged Wall-mount Cabinet: Standard Sizes Solid Door with Knockouts

Window Door with Knockouts with Gland Plate EWMWG242418

Nominal Size (Inches)

Rack Units

24 x 24 x 18

EWMS242418

EWMW242418

EWMS362418

EWMW362418

EWMWG362418

36 x 24 x 18

EWMS482418

EWMW482418

EWMWG482418

48 x 24 x 18

EWMW602418

60 x 24 x 18

EWMW722418

72 x 24 x 18

EWMS242425

EWMW242425

EWMWG242425

24 x 24 x 25

EWMS362425

EWMW362425

EWMWG362425

36 x 24 x 25

EWMS482425

EWMW482425

EWMWG482425

48 x 24 x 25

EWMW602425

60 x 24 x 25

EWMW722425

72 x 24 x 25

EWMW242430

24 x 24 x 30

EWMW362430

36 x 24 x 30

EWMW482430

48 x 24 x 30

Extra Deep Models Includes 4" wide vertical cable manager with fingers

EWMW242825

24 x 28 x 25

EWMW362825

36 x 28 x 25

EWMW482825

48 x 28 x 25

AccessPlus II Accessories Vertical Cable Manager

Use with

EWMC24

EWMW242825

EWMC36

EWMW362825

EWMC48

EWMW482825

Fan & Blocking Panel Kits

Use with

EWMF1

18" Deep 25" and 30" Deep

EWMF2 Replacement Keys Code 333

Use with

E333KEY

All locks with code 333, qty 2 keys

PROTEK Wall-mount Cabinets ®

Type 4 and Type 12 - NEMA rated Select these wall-mount cabinets to protect 19-inch network equipment from dirt, splashing water, dust and other contaminants. Both solid door and safety glass window door models are plenum rated.

ProTek® Cabinets • Clear safety glass for greater clarity, strength and scratch resistance than plexiglass • Precision-engineered, quality-welded construction • Foam-in-place gasket seals out contaminants • Tapped adjustable rack angles included (optional square hole rack angles available)

ProTek Wall-mount Cabinet: Standard Sizes Solid Door Type 4, IP66

Solid Door Type 12, IP55

Window Door Type 12, IP55

Nominal Size

Rack Units

(Inches)

Gray

Black

Gray

Black

Gray

PTDS242412G4

PTDS242412B

PTDS242412G

PTDW242412B

PTDW242412G

24 x 24 x 12

PTDS362412G4

PTDS362412B

PTDS362412G

PTDW362412B

PTDW362412G

36 x 24 x 12

PTDS482412G4

PTDS482412B

PTDS482412G

PTDW482412B

PTDW482412G

48 x 24 x 12

PTDS242424G4

PTDS242424B

PTDS242424G

PTDW242424B

PTDW242424G

24 x 24 x 24

PTDS362424G4

PTDS362424B

PTDS362424G

PTDW362424B

PTDW362424G

36 x 24 x 24

PTDS482424G4

PTDS482424B

PTDS482424G

PTDW482424B

PTDW482424G

48 x 24 x 24

ProTek Type 4 or Type 12 Double-hinged Wall-mount Cabinet: Standard Sizes Solid Door Type 4, IP66 Type 12, IP55

Window Door Type 4, IP66

Nominal Rack Size (Inches) Units

PTDHS162415G4

PTDHS162415G

PTDHW162415G

16 x 24 x 15

PTDHS202415G4

PTDHS202415G

PTDHW202415G

20 x 24 x 15

PTDHS242415G4

PTDHS242415G

PTDHW242415G

24 x 24 x 15

PTDHS362415G4

PTDHS362415G

PTDHW362415G

36 x 24 x 15

PTDHS482415G4

PTDHS482415G

PTDHW482415G

48 x 24 x 15

PTDHS242424G4

PTDHS242424G

PTDHW242424G

24 x 24 x 24

PTDHS362424G4

PTDHS362424G

PTDHW362424G

36 x 24 x 24

PTDHS482424G4

PTDHS482424G

PTDHW482424G

48 x 24 x 24

UL 508A Cabinet Ratings Provides a degree of protection against these environmental conditions Dust and windblown dust

Type 4 Indoor and Outdoor Use

Type 12 Primarily Indoor Use

Falling dirt

Rain

Splashing and hose-directed water

Dripping non-corrosive liquids

Corrosion Formation of ice on the enclosure

PROTEK Thermal Packages ®

Type 1, Type 4 and Type 12 - NEMA rated These wall-mount cabinets provide integrated thermal management using either a fan and filter combination or air conditioner to control internal temperatures while protecting sensitive 19-inch rack equipment from water and harmful environmental contaminants, including dust, dirt and other debris. The preconfigured packages, available in single- or double-hinged solid (Type 4) or scratch-resistant window (Type 12) door models, require no additional layout, drilling or sawing to accommodate thermal devices.

• Fan and filter package offers top pagoda fan and bottom filter to prevent dust from entering the cabinet (Type 1 models) • Air conditioner package delivers 235 watts (800 BTUs) of cooling for applications with high ambient temperatures • Solid door provides equipment with complete physical and visual protection (Type 4 models) • Window door features scratch-resistant safety glass for simple equipment monitoring (Type 12 models) • Fully welded and ground body and door construction for enhanced durability • Foam-in-place seamless gasket seals against outdoor air infiltration

Protek Double-hinged AC Package Type 4, IP66

Protek Single Door Fan Package

Type 12, IP55

Nominal Size (Inches)

PTDHS242429GA4

PTDHW242429GA

24 x 24 x 29

PTDHS362429GA4

PTDHW362429GA

36 x 24 x 29

PTDHS482429GA4

PTDHW482429GA

48 x 24 x 29

Protek Double-hinged Fan Package Protek Single Door AC Package

UL Type 1, IP30

Nominal Size (Inches)

UL Type 1, IP30

Nominal Size (Inches)

Type 4, IP66

Type 12, IP55

Nominal Size (Inches)

PTDW242424GF

24 x 24 x 24

PTDHW242424GF

24 x 24 x 24

PTDS242424GA4

PTDW242424GA

24 x 24 x 24

PTDW362424GF

36 x 24 x 24

PTDHW362424GF

36 x 24 x 24

PTDS362424GA4

PTDW362424GA

36 x 24 x 24

PTDW482424GF

48 x 24 x 24

PTDHW482424GF

48 x 24 x 24

PTDS482424GA4

PTDW482424GA

48 x 24 x 24

Unique Applications

Wall-mount cabinets and racking deliver security and accessibility even in tight corners or extreme conditions. Let us help you find the right solution from our extensive product line or modify an existing offering to meet your unique requirements.

L-Box® Type 1 Wall-mount Cabinet The L-BOX Cabinet meets a wide range of network needs, including intermediate distribution frame (IDF), zone cabling applications, cross connections and consolidation points. • Unique vertical mounting • Spring-loaded self-retained hinge pins allow door removal • Wrap-around L-shaped door provides 2-sided access to equipment • Quarter-turn latches with key lock L-Box Wall-mount Cabinet: Standard Sizes Part Number

Nominal Size (Inches)

DBL242412G

24 x 24 x 12

DBL362412G

36 x 24 x 12

DBL482412G

48 x 24 x 12

L-BOX shown with a PDU, patch panel and network switch

D-Box™ Type 1 Wall-mount Cabinet The D-BOX Cabinet provides convenient mounting, storage and protection for network equipment, patch panels and connections. • Fixed and rotating rack angles • Accommodates high-density equipment mounting • Reversible door fits flush to body with no exposed corners • Multiple cable tie-down points D-Box Wall-mount Cabinet: Standard Sizes Part Number

Nominal Size (Inches)

DBS24248G

24 x 24 x 8

DBS36248G

36 x 24 x 8

DBS48248G

48 x 24 x 8

DBS242412G

24 x 24 x 12

DBS362412G

36 x 24 x 12

DBS482412G

48 x 24 x 12

D-BOX shown with a PDU, angled patch panel, network switch and top-mounted fan

Fiberglass Cabinets Perfect Cabinet for Wireless Access Points Lightweight, corrosion-resistant fiberglass excels at protecting WiFi equipment indoors or out. Hoffman’s Type 4X WiFi Cabinet comes with solid or window covers that are secured with screws; optional quickrelease latches are also available. This cabinet is ideal for applications in tunnels, floor vaults or marinas as well as on outside walls and rooftops.

Fiberglass Hinged-cover Type 4X WiFi Cabinet • Fiberglass construction allows WiFi and WLAN signals to pass through the cabinet unimpeded • Fiberglass is easily punched, drilled, filed or sawed • Resists chemicals and temperature changes • Seamless foam-in-place gasket seals out water and dust • Quick-release latches in corrosion-resistant polyester • Includes ¾-inch plywood panel for mounting equipment • Removable hinged cover • Cabinets with solid doors are plenum rated • Ideal for indoor or outdoor applications

Fiberglass Hinged-cover Type 4X WiFi Cabinet: Standard Sizes Solid Door

Window Door

Nominal Size (Inches)

D664CHSCFGP

D664CHSCFGWP

6x6x4

D16148CHSCFGP

D16148CHSCFGWP

16 x 14 x 8

D181610CHSCFGP

D181610CHSCFGWP

18 x 16 x 10

ULTRX® Fiberglass Type 4X WiFi Cabinet • Fiberglass construction allows WiFi and WLAN signals to pass through the cabinet unimpeded • Can be rotated 180° for left and right hinging • Standard molded-in drip shields • Optional data pocket in high-impact thermoplastic • Replaceable breakaway hinges • Ideal for indoor or outdoor applications

DataCom ULTRX® Fiberglass Type 4X WiFi Cabinets: Standard Sizes Solid Door

Window Door

Nominal Size (Inches)

DU606030P

DU606030WP

25 x 24 x 13

Aluminum Outdoor Cabinets Outside Plant (OSP) Applications For outside plant (OSP) needs, turn to Hoffman. We offer a full range of OSP products and accessories. OSP products include FTTX, DSL, outdoor aluminum and pole-mount cabinets. See the Hoffman DataCom Catalog for additional details.

COMLINE® Aluminum Wall- and Pole-mount Cabinets Lightweight, corrosion-resistant aluminum provides long-lasting protection in extreme environments indoors or out, including petrochemical plants, sewage facilities and marine settings. • Accessory solar shield helps resist heat build-up • Foam-in-place gasket seals out contaminants • Doorstop/wind latch holds door in place during service for easier installation and improved safety • Rack angles included (one set) • Single- and three-point latching for increased security

Type 3, 3R, 4, 4X, 12 rated Rack-mount devices shown not included

Modifications and Customization Facing a unique challenge? Let us customize any of our standard wall-mount products to suit your specific application. Hoffman’s modification services can deliver the options you need in wall-mount cabinets—when you need it. Specify from these options: • Cabinet height, width and depth • Over 100 standard finish colors and textures plus custom paints and finishes • Holes and cutouts in body, doors and subpanels • Tapped holes, fasteners and mounting channel in cabinet or subpanel • Mounting options • Door options • Window options • Subpanels • Structural changes • Environmental controls (AC units, louvers, fans and filters) 8

Custom COMLINE Pole-mount Cabinet with heat exchanger and customer integration

Wall-mount Racks and Specialty Cabinets

19-inch Hinged Wall-mount Rack

19-inch Hinged Wall-mount and Swing-out Racks For low-cost mounting solutions where floor space is at a premium, 19-inch wall-mount racks offer an ideal solution. 19-inch Hinged Wall-mount and Swing-out Racks: Standard Sizes

Hinged Panel Swingout Rack

Load Rating

Part Number

Dimension

E19HPM1U

1.75

E19HPM2U

3.5

(Inches)

(Lbs)

Rack Units

E19SWM12U20

25.5

100

E19SWM20U20

39.5

150

E19SWM25U20

48.2

175

19-inch Swing-out Rack

19-inch Rack-mount or Desktop Case Cabinets Electronic cases are designed to house 19-inch electronic equipment in a rigid framework that provides easy front and rear access. Typical applications include: • Networking equipment • Testing equipment • Subracks • Chasis Rack-mount Cabinet

19-inch Rack-mount or Desktop Case Cabinets: Standard Sizes Part Number

Nominal Size (Inches)

ERC3U4837

5 x 19 x 15

Rack Units 3

ERC4U4843

7 x 19 x 17

Rack-mount and table top versions available

For every application, there’s a Hoffman DataCom solution.

Material Wall-mount Family

MILD STEEL ACCESSPLUS® II

Size Range

PROTEK®

24" x 24" x 18" to 72" x 24" x 25"

24" x 24" x 12" to 48" x 24" x 24"

16" x 24" x 15" to 48" x 24" x 25"

Rack Units (RU)

12–39

12–26

7–26

Loading (Static)

250–500 lbs.

100–200 lbs.

Standard Features

ACCESSPLUS® II double-hinged wall-mount provides both security and accessibility. Designed to hold multiple pieces of voice data equipment. Perfect where space is at a premium. Single person mounting L atch-free sides permit flush-mounting to adjacent equipment, cabinets and walls • Safety glass window units • Pole mounting kit available • Reversible hinges (left/right) • Grounding and bonding provisions • •

Body Features: Front Door

PROTEK® wall-mounts are ideal for protecting network equipment beyond typical Type 1 cabinets.

A vailable with fan and filter and AC packages • Extra deep sizes • Fully vented with foam-in-place gasket • Safety glass • Rack angle standard • Grounding and bonding provisions •

Offers the flexibility and accessibility of a double-hinged wall-mount and the environmental protection of the PROTEK® Type 4, 12 ratings. Double hinged for easy access A vailable with fan and filter and AC packages • Extra deep sizes • Fully vented with foam-in-place gasket • Safety glass • Rack angle standard • Front and rear access • Grounding and bonding provisions • •

Window or solid

Keyhole mounting slots, accessory raised pads, cable tie-down points, large cable knock-out

Rear mounting studs, panel-ready and wall-mounting provisions

Gland plate/Cable knock-outs, fan-ready

Solid sheet steel construction

Cable knock-outs, fan-ready

Solid sheet steel construction

Rack Angles

1 set tapped 10-32 fully adjustable, plated

Applications

Most frequently utilized model for mounting network equipment. Gland plate offering great for retrofit applications.

Ideal for remote areas with harsh environments for network equipment. Extradeep to accommodate rack equipment.

Ideal for remote areas with harsh environments for network equipment. Extra deep to accommodate rack equipment.

Back

Top/Bottom Sides

•

Indoors with built-in ventilation areas

• •

Ratings

PROTEK® Double-hinged

UL 1863, 508A, CSA, NEMA, IEC Type 1, IP20 Plenum rated

Indoors and outdoors P rotects from dust, dirt and splashing water

UL 508A, 508, CSA, NEMA, IEC Type 4, 12, IP55, IP66 Type 1 (fan and filter package only) Plenum rated

•

Protects from dust, dirt and splashing water

UL 508A, 508, CSA, NEMA, IEC Type 4, 12, IP55, IP66 Type 1 (fan and filter package only) Plenum rated

L-BOX

D-BOX

™

24" x 24" x 12" to 48" x 24" x 12"

FIBERGLASS

ALUMINUM

WiFi Enclosure—2 Models

COMLINE®

24" x 24" x 8" to 48" x 24" x 12"

6" x 6" x 4" to 25" x 24" x 13"

12" x 12" x 6" to 60" x 35" x 12"

6–12

4–6

Not applicable for smaller model. Optional RU for large model.

Not supplied as standard. Optional 12–26 RUs.

75 lbs.

50–200 lbs.

A secure cabinet for WiFi and other network equipment. Fiberglass does not impede WiFi/WLAN signals.

Lightweight, corrosion-resistant aluminum cabinet provides long-lasting protection for electrical and network components for both indoor and outdoor environments.

L-BOX® provides convenient mounting and storage for patch panels in a space-saving design.

R emovable door Cable tie-down points • Mounting screws provided • Top and bottom knock-outs • Cable spool mounting • Grounding and bonding provisions • Horizontal cable distribution • Copper to fiber • Vertical rack angles

D-BOX ™ provides convenient mounting and patch panel storage.

R emovable and reversible door Quarter-turn latches with keyed lock • Cable tie-down points • Mounting screws provided • Grounding and bonding provisions • Top and bottom knock-outs • Cable spool mounting • Complete accessories—fans, shelves, etc. • Horizontal cable distribution • Copper to fiber • Consolidation points • Fixed and rotating rack angles

orrosion resistant C Fiberglass is easily punched or drilled • Foam-in-place gasketing • Removable door with stainless steel hinge pins • Window models are scratch resistant GE Lexan Margard • Small model—screw cover • Large model—key lock knob • Plywood back panel provided

orrosion resistant C Solar shield provides cooler interior for outdoor applications • Foam-in-place gasketing • Latching—one- and three-point options • Door stop • Door options—removable and heavy-duty continuous • Grounding and bonding provisions

•

Vented wrap-around door

Solid with vents

Solid or window

Solid

Keyhole mounting slots, accessory raised pads, cable tie-down points, large cable knock-out

Wood panel standard

Rear mounting studs, panel-ready and wallmounting provisions

Cable knock-outs, fan-ready

Solid fiberglass construction

Solid aluminum construction

Cable knock-outs, fan-ready

Solid fiberglass construction

Solid aluminum construction

1 set tapped 10-32, fixed plated

•

Optional on largest size

•

Vertical equipment mounting provides horizontal cable distribution. Offers a lower profile installation.

Fixed and rotating rack angles for easy equipment mounting. Offers a lower profile installation.

Great for tunnels, marinas, outside walls and rooftops. Ideal for wireless applications; signals pass unimpeded through fiberglass.

Great for rooftop, pole-mount and tower mounting. Lightweight with corrosion resistance.

•

Indoors with built-in ventilation areas

•

1 set tapped 10-32, fixed plated 1 set tapped 10-32, fully adjustable

Indoors with built-in ventilation areas

• •

UL 1863, 508A, 60905, CSA, NEMA, IEC, EIA 310-D Type 1, IP40 Plenum rated

I ndoors and outdoors plus hazardous areas Protects from dust, dirt and splashing water

UL 508A, 508, CSA, NEMA, IEC Type 4, 4X, 12, 13 IP66 Plenum rated (solid door only)

•

• •

ptional based on size O 1 set tapped 10-32, fully adjustable

I ndoors and outdoors plus hazardous areas Protects from dust, dirt and splashing water

UL 508A, 508, CSA, NEMA, IEC Type 3, 3R, 4, 4X, 12, IP66

How can we help you?

hoffmanonline.com

Hoffman Delivers DataCom Cabinet Solutions Your organization depends on data. To keep your systems functioning smoothly and reliably, turn to Hoffman for answers. No cabinet provider responds better, more quickly or more completely than Hoffman—whatever the industry, whatever the application. For more than 50 years, we’ve defined excellence in electrical cabinets with thousands of offerings in every size and shape. We excel in providing the right solution for even the most complex applications. Your Hoffman representative is your cabinet solutions expert. Count on Hoffman and our authorized distributor network to meet your DataCom needs.

USA 2100 Hoffman Way Anoka, Minnesota 55303-1745 U.S.A. Tel: 763-422-2661 Fax: 763-422-2588 Customer Service: 763-422-2661

Canada 111 Grangeway Avenue, Suite 504 Scarborough, Ontario M1H 3E9 Tel: 416-289-2770 Fax: 416-289-2883 1-800-668-2500 (Canada only)

Mexico Hoffman Enclosures Mexico, S. de R. L. de C. V. Arquímedes No. 33 Piso 1 Col. Palmas Polanco Mexico, DF CP 11560 Tel: (55) 5280-1596 Fax: (55) 5280-8827 / 5280-8167

Bro-00017 Rev. B