2012 Oberon Product Catalog by Accu-Tech

oberonwireless.com

Secure Infrastructure Solutions For

Wireless Networks Product Catalog 2012

Table of Contents

Welcome to Oberon

Suspended Ceiling Enclosures 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Model 1030‐FLANGE & 1030‐00 Model 1036‐00 Model 1041‐00 Model 1052‐00 Model 1052‐1140/3500/3600 Model 1052‐AN Model 1052‐AN‐ANT16 Model 1052‐AP105 Model1052‐AP135 Model 1052‐CCOANT Model 1052‐ENT3610 Model 1052‐HFHS‐N Model 1053‐00 Model 1053‐06 Model 1053‐T Model 1055‐AN Model 1059‐00 Model 1059‐MIMO Model 1060‐00 Model 1060‐T Model 1064‐00 Model 1064‐T Model 1066‐00

Ceiling Enclosures Designed to UL 2043 28 29

Model WC‐AP1240‐X Model WC‐AP3500‐X

Outdoor NEMA Wall‐Mounted Enclosures 30 31 32 33

Model 1020‐PS Model 1021‐00 Model 1025‐00 Model 1026‐00

“Hard‐Lid” Ceiling and Wall Mounted Enclosures 34 35 36 37 38 39 40 41 42

Model 1022‐00 Model 1023‐00 Model 1024‐00 Model 1027‐00 Model 1027‐1140/3500/3600 Model 1029‐00 Model 1030‐00 Model 1032‐00 Model 1032‐C

Ceiling‐Mounted Telecom Enclosures 43 45 46

Model 1070‐00 Model 1072‐00 Model 1090‐00

Wall‐Mounted Network Cabinets 47 48

Model 1082‐00 Model WR‐BOX

Retrofit Doors 49 50 51 52 53 54 55 56 57

Model 38‐52‐1140/3500/3600 Model 38‐52‐3500e Model 38‐152‐AP105 Model 38‐52‐AP135 Model 38‐52‐CCOANT Model 38‐52‐ENT3610 Model 38‐52‐HFHS‐N Model 38‐53‐1140/3500/3600i Model 38‐53‐AP105

Custom Color Skin for Cisco Wireless Access Points 58 59

Model CCOAPi‐SKIN Model 1260/3500e‐SKIN

Custom Enclosures 60

Custom Access Point Enclosures

WiFi Antennas 62 64 65 66 68 69 70 71 72 73 74 75 76 77 78 79

34‐ZDUAL‐KIT 34‐MIMO 34‐ZMIMO3X1 34‐ZMIMO6X1 34‐DMDUAL‐KIT 34‐PLANAR 34‐BMANT24‐KIT 34‐BMANT5‐KIT 34‐MINIANT‐2.4‐KIT 34‐MINIANT‐5‐KIT 34‐DBANT2450‐KIT 34‐244958‐KIT 34‐OMNI8‐24 34‐OMNI10‐NF 34‐OMNI5‐RPTNCM 34‐PATCH‐RPTNCM‐8

Cellular Antennas 80 81

34‐CELLULAR‐PCS 34‐MULTI‐CARRIER

Accessories 82 85 85

Cabling Accessories Enclosure Accessories Ceiling Mounting Accessories

Warranty 87

Appendix A – Warranty

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

PAGE 2

Welcome to Oberon Wireless Enclosures – Secure, aesthetic, convenient Oberon’s product line includes locking wireless access point enclosures for virtually any building construction, indoor and outdoor. This includes wall‐mounted locking enclosures and cut‐away ceiling enclosures for hard lid areas, and NEMA 4 enclosures for outdoor environments. The products are constructed of steel and aluminum and are electrostatically powder coated for an attractive, extremely durable finish. The ceiling enclosures look like a standard 2’ x 2’ ceiling tile, aesthetically concealing the wireless equipment. The products improve wireless infrastructure physical security by allowing the wireless equipment to be “locked down” in otherwise open office spaces. Wireless coverage is improved using the ceiling‐mounted enclosures as the enclosure door provides an effective back‐plane for the antenna, thereby optimizing the antenna pattern for in‐room coverage. Moves, adds, and changes are facilitated by permitting easy access by authorized personnel. When you use Oberon’s ceiling enclosures, once the enclosure is installed, you’ll eliminate the need to lift ceiling tiles in search of above ceiling mounted wireless equipment.

Our locking ceiling enclosures and antenna products preserve the integrity and safety of the ceiling system and air‐ handling space by effectively moving the wireless equipment into a conveniently accessed ceiling location.

Telecommunication Enclosures and Cabinets – Bringing bandwidth closer to the user Oberon’s telecommunications enclosures offer flexibility by securing networking and A/V components in the workspace where they are needed. Mounting access switches in the workspace brings bandwidth closer to the user, and reduces congestion in the telecom room. Manufacturing and Support Oberon’s specialty is wireless and telecom enclosure and mounting solutions, and the products are designed and tested by an experienced technical staff with extensive wireless networking survey, design, and installation experience. Oberon’s products have been tested with most of the industry‐leading wireless networking vendor products.

Oberon, Inc. Corporate Office Center

As a product and design service vendor, we provide outstanding support to our market channel partners – the distributors, network designers, installers, and integrators responsible for enterprise wireless LAN installation. Our combination of patent‐pending, innovative products and industry‐experienced staff will provide the wireless infrastructure designer exceptional cost, performance, security, aesthetic, and installation value.

© 2011 Oberon, Inc. Copyright. All Rights Reserved. All text, images, graphics, and other materials contained in this catalog are subject to the copyright and other intellectual property rights of Oberon, Inc. These materials may not be reproduced, distributed, modified or reposted to other websites without the express written permission of Oberon, Inc.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Access Point Compatibility

Oberon has developed strategic relationships with the following leading wireless access point vendors to ensure that Oberon’s products have been tested and verified for fit and functionality.

Oberon’s wireless LAN access point and Ethernet switch enclosures accommodate products from most leading vendors. Visit the online search feature on Oberon’s website (www.oberonwireless.com) to find enclosures and mounting solutions for the products you are using.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

BIM, CAD, and CSI Specifications

Model 1030‐FLANGE

Suspended Ceiling Enclosure

Oberon’s Model 1030‐00 “hard lid” or wall mount enclosure provides a secure, aesthetic, convenient mounting solution for wireless access points from most vendors. The enclosure has a low profile impact resistant ABS dome so that wireless access points with integrated or non‐detachable antennas can be secured in otherwise unsecured spaces. The product is UL Listed and designed to satisfy National Electric Code (NEC) paragraphs 300‐22 and 300‐23 for installation in the air handling space. Locks are “keyed‐alike” to simplify moves, adds, and changes. An optional suspended ceiling flange kit, 1030‐FLANGE, permits the Model 1030‐00 to be mounted in a standard 2’ x 2’ suspended ceiling system.

Oberon Model 1030‐FLANGE kit shown with Model 1030‐00 and Cisco 1142 wireless access point (not included)

Specifications:  Wireless access point enclosure designed to be surface mounted on “hard‐lid” ceilings or walls.  Designed to accommodate wireless access points from most vendors with integrated or non‐ detachable antennas  UL listed and designed to meet NEC300‐22 and 300‐23 for air handling space installations  OSHPD approved (OPA # 1638)  Construction: 16 gauge, powder coated steel back box, fully hinged locking door with UL 94‐5VA ABS plastic  Dome is impact resistant and transparent to wireless signals  Knockouts for ¾” trade conduit connectors and snap‐in keystone jacks and connectors  Opening in back box for wall jacks  Size: Flange is 22" x 24", Enclosure is 17" x 17" x 3 ½" (total depth), the dome is 12” x 12” x 2”  Weight: 17.5 lbs (not including access point)  Suspended ceiling flange kit (part number 1030‐FLANGE) is optional  If enclosure is in flange it must be supported by the building ceiling structural system, not tile gridwork. Model 1030‐FLANGE & 1030‐00 Includes:  (1) Universal access point mounting plate  (1) ½” Trade size conduit connector  (2) Keys for lock  (4) # 6‐32 x 3/16 Screws  (4) # 8‐32 x 3/16 Screws  Mounting Instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1036‐00 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1036‐00 wireless LAN access point enclosure is a locking, ceiling tile insert, designed to accommodate access points from most manufacturers. This aesthetic, white powder coated steel enclosure has openings in the ventilated door for up to six antennas. Installation requires a square opening to be cut into the ceiling tile. The enclosure is supported by two back‐side tile bridges.

Model 1036‐00 shown with Cisco 1242 AP (not included) and (2) optional 34‐ZDUAL antennas (not included)

Specifications:         

Ceiling tile insert, accommodates one access point from most manufacturers UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved, OPA # 1638 Accommodates up to (6) external antennas using the bulkhead connector kit for dipole antennas (Oberon P/N 35‐BULKHD‐KIT) or Oberon 34‐ZDUAL or 34‐DMDUAL antennas Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 14" x 14", access point enclosure is 12" x 12" x 3¾” deep Weight: 11lbs (not including access point or antennas) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1036‐00 Includes:    

Universal mounting plate for most manufacturers access point, mounting screws & hardware (4) Suspension wires, and (2) tile bridges (2) ¾” trade clamp connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1041‐00 BIM, CAD, and CSI Specifications

Concealed Spline Ceiling Mounts

Oberon’s Model 1041‐00 wireless LAN access point mount is a 12 inch by 12 inch (305 mm by 305 mm) concealed spline (or concealed tee) ceiling tile designed specifically to conveniently and aesthetically secure the Cisco 1140, 1260, 3500 and 3600 series wireless access points. The Cisco access point is mounted into this white powder‐coated steel ceiling tile, and it installs into the ceiling runners like a standard concealed spline tile. The access point is securely flush to the ceiling, making for an aesthetic installation, and providing ideal, unobstructed wireless coverage.

Model 1041‐00 Concealed spline tile mount shown with Cisco 1140 Wireless access point (not included)

Specifications: 

    

Design: Concealed spline ceiling tile mount specifically designed for Cisco 1040, 1140, 1260, 3500 and 3600 wireless access points. Steel mount emulates a ceiling tile and installs into standard concealed spline ceiling gridwork. Performance: Designed to meet NEC300‐22 and 300‐23 for plenum installations. OSHPD approved OPA #1638. Construction: Textured white powder‐coated steel, and zinc‐ coated steel Size: 12 inch by 12 inch by 1 inch deep (305 mm by 305 mm by 25 mm) Weight: 3.5 lbs (not including access point) Ceiling mounts must be supported by the building structure independent of the suspended ceiling

Model 1041‐00 Includes:   

(4) eyebolts and mounting hardware (1) ¾” Trade conduit connectors for data cable opening in the back Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐00 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1052‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure designed specifically for the Cisco 1232,/1242/1260/3500e/3600e and many Aruba Networks access points. The enclosure accommodates many other manufacturers access points with Oberon’s optional universal mounting plate. This aesthetic, white powder coated steel enclosure has openings in the door for up to six antennas. No ceiling tile cuts are required for installation.

Model 1052‐00 shown with (4) optional Oberon 34‐ZDUAL Antennas and Cisco 1242 AP (not included)

Specifications:          

Ceiling tile enclosure specifically designed for Cisco 1242 and Aruba 70 access points (when using Aruba 70 access point, requires Aruba Networks AP‐70‐MNT mounting bracket) Accommodates many other manufacturers access points with Oberon universal mounting plate P/N 38‐1052‐MNT‐KIT UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Accommodates up to (6) external antennas using the bulkhead connector kit for dipole antennas (Oberon P/N 35‐BULKHD‐KIT) or Oberon 34‐ZDUAL or 34‐DMDUAL antennas Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 13lbs (not including access point or antenna) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐00 Includes:    

Access point mounting screws (4) Suspension wires (2) ¾” Trade conduit connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐1140/3500/3600 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

Oberon’s Model 1052‐1140/3500/3600 wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed specifically to conveniently mount and secure the Cisco 1040/1140/1260/3500/3600 series access points. The enclosure is based on Oberon’s popular 1052‐00 universal wireless access point enclosure, with a door designed specifically for Cisco’s newest access points. No ceiling tile cuts are required for installation. Just mount the access point into the door, place the ceiling tile enclosure in the ceiling, secure the enclosure to the ceiling support structure, and the access point is conveniently and aesthetically secured in the ceiling. Upgrades to different styles of access points are achieved by simply unlocking and replacing the door.

1) Model 1052‐1140/3500/3600 and Cisco 1142 AP (not included) 2) Exploded view of the door, access point, access point mounting bracket, and assembly mount bracket

Specifications:         

Ceiling tile enclosure specifically designed for Cisco 1140/1260/3500/3600 series wireless access points Use Cisco AIR‐AP‐BRACKET‐1 for 3600 series and AIR‐AP‐BRACKET‐2 for 3500 series UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike. Door can be replaced to migrate to new access points. Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 13lbs (not including access point or antenna) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐1140/3500/3600 Includes:    

Access point mounting screws (4) Suspension wires (2) ¾” Trade conduit connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐AN BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1052‐AN wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed specifically for the Aruba Networks access points with detachable antennas (AP‐60, AP‐70, AP‐120, AP‐124). This aesthetic, white powder coated steel enclosure has mounting features in the door for installation of the Aruba Networks antennas, simplifying installation & optimizing wireless coverage. No ceiling tile cuts are required for installation.

Model 1052‐AN shown with Aruba Networks AP‐120 (not included) and (3) Aruba Networks AP‐ANT‐13B Antennas (not included)

Specifications:  

        

Ceiling tile enclosure specifically designed for Aruba Networks APs with detachable antennas (AP‐60, AP‐70, AP‐120, AP‐124). AP‐70 requires Aruba Networks AP‐70‐MNT mounting bracket. AP‐120 and AP‐124 require the Aruba Networks AP‐120‐MNT mounting bracket. AP‐60 requires the Aruba Networks AP‐60‐MNT mounting bracket. (order from Aruba Networks) UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Mounting features on the door accommodate up to (3) Aruba Networks AP‐ANT‐13B antennas Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 13lbs (not including access point or antenna) De‐rate upper operating temperature limit from +50°C to +40°C when AP in the enclosure Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐AN Includes:    

Mounting screws and hardware (4) Suspension wires (2) ¾” Trade clamp connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐AN‐ANT16 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1052‐AN‐ANT16 wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed specifically for the Aruba Networks access points with detachable antennas (AP‐60, AP‐70, AP‐120, AP‐124). This aesthetic, white powder coated steel enclosure has mounting features in the door for installation of the Aruba Networks AP‐ANT‐16 antenna, simplifying installation & optimizing wireless coverage. No ceiling tile cuts are required for installation.

1052‐AN‐ANT16 shown with Aruba Networks AP120 and AP‐ANT‐16 802.11n, 3 element, dual band antenna (not included)

Specifications:          

Ceiling tile enclosure specifically designed for Aruba Networks access points with detachable antennas UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Mounting features on the door for the Aruba Networks AP‐ANT‐16 802.11n, 3 element, dual band antenna Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 13lbs (not including access point or antenna) De‐rate upper operating temperature limit from +50°C to +40°C when AP in the enclosure Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐AN‐ANT16 Includes:    

Mounting screws and hardware (4) Suspension wires (2) ¾” Trade conduit connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐AP105 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

Oberon’s Model 1052‐AP105 wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed specifically to conveniently mount and secure the Aruba Networks AP‐105 wireless access points. The enclosure is based on Oberon’s popular 1052‐00 universal wireless access point enclosure, with a door designed specifically for Aruba Networks AP105 wireless access point. No ceiling tile cuts are required for installation. Just mount the access point into the door, place the ceiling tile enclosure in the ceiling, secure the enclosure to the ceiling support structure, and the access point is conveniently and aesthetically secured in the ceiling. Upgrades to different styles of access points are achieved by simply unlocking and replacing the door.

1) Model 1052‐AP105 shown with Aruba Networks AP105 access point (not included) 2) Exploded view of the door, access point, and bracket

Specifications:        

Ceiling tile enclosure specifically designed for Aruba Networks AP‐105 access points UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike. Door can be replaced to migrate to new access points. Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 13lbs (not including access point or antenna) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐AP105 Includes:    

Access point mounting screws (4) Suspension wires (2) ¾” Trade conduit connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐AP135 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

Oberon’s Model 1052‐AP135 wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed specifically to conveniently mount and secure the Aruba Networks AP‐135 wireless access points. The enclosure is based on Oberon’s popular 1052‐00 universal wireless access point enclosure, with a door designed specifically for Aruba Networks AP135 wireless access point. No ceiling tile cuts are required for installation. Just mount the access point into the door, place the ceiling tile enclosure in the ceiling, secure the enclosure to the ceiling support structure, and the access point is conveniently and aesthetically secured in the ceiling. Upgrades to different styles of access points are achieved by simply unlocking and replacing the door.

1) Model 1052‐AP135 shown with Aruba Networks AP135 access point (not included) 2) Exploded view of the door, access point, and bracket

Specifications:        

Ceiling tile enclosure specifically designed for Aruba Networks AP‐135 access points UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike. Door can be replaced to migrate to new access points. Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 13lbs (not including access point or antenna) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐AP135 Includes:    

Access point mounting screws (4) Suspension wires (2) ¾” Trade conduit connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐CCOANT BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1052‐CCOANT wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure designed specifically for the Cisco 1260, 3500e, and 3600e series wireless access point. This aesthetic, white powder coated steel enclosure has mounting features in the door for installation of the Cisco 802.11n antennas, simplifying installation & optimizing wireless coverage. No ceiling tile cuts are required for installation.

Model 1052‐CCOANT shown with Cisco 3500e AP (not included) and Cisco AIR‐ANT2430V‐R and AIR‐ANT5140V‐R antennas (not included)

Specifications:         

Ceiling tile enclosure specifically designed for Cisco 1260, 3500e, and 3600e series APs UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved, OPA # 1638 Door mounting features for Cisco P/N AIR‐ANT2430V‐R and AIR‐ANT5140V‐R antennas only Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 15lbs (not including access point or antennas) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐CCOANT Includes:   

(4) Suspension wires (2) ¾” Trade size conduit connectors for power/data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐ENT3610 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

Oberon’s Model 1052‐ENT3610 wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed specifically to conveniently mount and secure the Enterasys AP3605, AP3610, and AP3630 series wireless access points. The enclosure is based on Oberon’s popular 1052‐00 universal wireless access point enclosure, with a door designed specifically for Enterasys’s newest access points. No ceiling tile cuts are required for installation. Just mount the access point into the door, place the ceiling tile enclosure in the ceiling, secure the enclosure to the ceiling support structure, and the access point is conveniently and aesthetically secured in the ceiling. Upgrades to different styles of access points are achieved by simply unlocking and replacing the door.

1) Model 1052‐ENT3610 shown with Enterasys 3610 AP (not included) 2) Exploded view of the adaptor door, access point, access point mounting bracket, and assembly mount bracket

Specifications:        

Ceiling tile enclosure specifically designed for Enterasys AP3605, AP3610 or AP3630 series access points UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike. Door can be replaced to migrate to new access points. Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 13lbs (not including access point or antenna) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐ENT3610 Includes:    

Access point mounting screws (4) Suspension wires (2) ¾” Trade clamp connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1052‐HFHS‐N BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1052‐HFHS‐N wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure designed specifically for the Enterasys HiPath 3620/3640 802.11n access point. This aesthetic, white powder coated steel enclosure has mounting features on the door for installation of an aesthetic dual band MIMO antenna. No ceiling tile cuts are required for installation.

Model 1052‐HFHS‐N shown with Enterasys HiPath 3620 access point and MIMO dual band antenna (not included)

Specifications:         

Ceiling tile enclosure specifically designed for Enterasys HiPath 3620/3640 access point UL50 listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Mounting features on the door for dual band 802.11n antenna (Enterasys P/N WS‐AI‐DT04360 dual band 802.11n MIMO antenna, 3 X 36” pigtails with RP‐SMA connectors) Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 12.5" x 12.5 " x 4.5" deep Weight: 13lbs (not including access point or antenna) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐HFHS‐N Includes:    

Access point mounting screws (4) Suspension wires (2) ¾” Trade conduit connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1053‐00 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1053‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure designed specifically for the Cisco 1250, 1260, 3500e, and 3600e series wireless access point. This aesthetic, white powder coated steel enclosure has mounting features in the door for installation of the Cisco 802.11n antennas, simplifying installation & optimizing wireless coverage. No ceiling tile cuts are required for installation.

Model 1053‐00 shown with Cisco 1252 AP (not included) and Cisco AIR‐ANT2430V‐R and AIR‐ANT5140V‐R antennas (not included)

Specifications:         

Ceiling tile enclosure specifically designed for Cisco 1250, 1260, 3500e, and 3600e series APs UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved, OPA # 1638 Door mounting features for Cisco P/N AIR‐ANT2430V‐R and AIR‐ANT5140V‐R antennas only Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 13" x 13" x 5" deep Weight: 15lbs (not including access point or antennas) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1053‐00 Includes:     

Snap lock mounting plate for the Cisco 1250 access point Three light pipes to view access point LED’s externally (4) Suspension wires (2) ¾” Trade size conduit connectors for power/data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1053‐06 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1053‐06 wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed to be large enough for the Cisco 1250, 1260, 3500e, 3600e series wireless access points. The enclosure accommodates many other manufacturers access points with Oberon’s optional universal mounting plate. This aesthetic, white powder coated steel enclosure has openings in the door for up to six antennas. No ceiling tile cuts are required for installation.

Model 1053‐06 shown with (6) optional Oberon 34‐ZDUAL Antennas and Cisco 1252 AP (not included)

Specifications:          

Ceiling tile enclosure large enough for the Cisco 1250, 1260, 3500e, and 3600e series APs Accommodates many other manufacturers access points with Oberon universal mounting plate P/N 38‐1052‐MNT‐KIT UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved, OPA # 1638 Accommodates up to (6) external antennas using the bulkhead connector kit for dipole antennas (Oberon P/N 35‐BULKHD‐KIT) or Oberon 34‐ZDUAL or 34‐DMDUAL antennas Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 13" x 13" x 5" deep Weight: 15lbs (not including access point or antennas) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1053‐06 Includes:     

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1053‐T BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1053‐T wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure designed specifically for the Cisco 1250, 1260, 3500e, and 3600e series wireless access points. This aesthetic, white powder coated steel enclosure has mounting features in the door for installation of the Cisco 802.11n antennas, simplifying installation & optimizing wireless coverage. The 1053‐T features a 3/8” bevel in the flange around the perimeter, to match “tegular” ceiling tiles commonly used in new construction and renovations. No ceiling tile cuts are required for installation.

Model 1053‐T shown with Cisco 1252 AP (not included) and Cisco AIR‐ANT2430V‐R and AIR‐ANT5140V‐R antennas (not included)

Specifications:          

Ceiling tile enclosure specifically designed for Cisco 1250, 1260, 3500e, and 3600e series APs Features a 3/8” bevel in the flange around the perimeter, to match “tegular” ceiling tiles UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved, OPA # 1638 Door mounting features for Cisco P/N AIR‐ANT2430V‐R and AIR‐ANT5140V‐R antennas only Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 13" x 13" x 5" deep Weight: 15lbs (not including access point or antennas) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1053‐T Includes:     

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1055‐AN BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1055‐AN wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed specifically for the Aruba Networks access points with non‐detachable antennas (AP‐65, AP‐121, AP‐125). This aesthetic, white powder coated steel enclosure has an impact resistant, RF transparent dome that extends only 4.5” below the ceiling plane. No ceiling tile cuts are required for installation.

Model 1055‐AN shown with Aruba Networks AP‐121 (not included)

Specifications:           

Ceiling tile enclosure specifically designed for Aruba Networks access points with non‐detachable antennas (AP‐65, AP‐121, AP‐125). AP‐65 requires Aruba Networks AP‐65‐MNT mounting bracket. AP‐121 and AP‐125 require the Aruba Networks AP‐120‐MNT mounting bracket. (Order from Aruba Networks) UL50 Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Dome is UL 94‐5VA Classified ABS Plastic OSHPD approved OPA # 1638 Construction: Textured white powder‐coated steel, 16 ga. backbox, impact resistant, RF transparent, ABS dome Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, access point enclosure is 12.5" x 12.5 " x 3.3" deep Weight: 13lbs (not including access point or antenna) De‐rate upper operating temperature limit from +50°C to +40°C when AP in the enclosure Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1052‐AN Includes:    

Access point mounting screws (4) Suspension wires (2) ¾” Trade size conduit connectors for power/data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1059‐00 BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1059‐00 wireless LAN access point enclosure is a locking, 2’ x 2’ ceiling tile enclosure designed to accommodate access points with non‐detachable antennas from most manufacturers. This aesthetic, white powder coated steel enclosure has an impact resistant, RF transparent door, which protrudes only 4" below the ceiling plane. No ceiling tile cuts are required for installation.

Model 1059‐00 shown with Cisco 1242 AP and standard dipole antennas (not included)

Specifications:           

Ceiling tile enclosure designed for access points from most manufacturers RF transparent cover allows use of access point with non‐detachable or integrated antennas UL50 Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Dome is UL 94‐5VA Classified ABS Plastic OSHPD approved OPA # 1638 Enclosure is deep enough for any access point with an overall height of less than 5¾" Construction: Textured white powder‐coated steel, 16 ga. backbox, UL‐94V5A impact resistant textured white ABS door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 18" x 18" x 2.6" deep, ABS dome is 14" Sq. x 4" deep Weight: 17.5lbs (not including access point) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1059‐00 Includes:    

Universal mounting plate, mounting screws and hardware (4) Suspension wires (2) ¾” Trade size conduit connectors for power/data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1059‐MIMO BIM, CAD, and CSI Specifications

Suspended Ceiling Enclosure

The Model 1059-MIMO wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure designed specifically for the Extreme Networks Altitude 4620 dual radio 802.11n access point. This aesthetic, white powder coated steel enclosure has mounting features on the door for attachment of two dual band MIMO antennas. The installation is secure, aesthetic and convenient. The Model 1059-MIMO is designed for installation in the air-handling space. No ceiling tile cuts are required for installation.

Model 1059‐MIMO shown with Extreme Networks 4620 access point and 2 MIMO dual band antennas (not included)

Specifications:         

Ceiling tile enclosure specifically designed for Extreme Networks 4620 access point w/ connectors UL50 listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Mounting features on the door for two dual band 802.11n antennas (Oberon P/N 34‐MIMO dual band 802.11n MIMO antenna, 3 X 36” pigtails with RP‐SMA connectors) Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 2’ x 2’, AP Enclosure is 18" x 18 " x 2.6" deep Weight: 13lbs (not including access point or antenna) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1059‐MIMO Includes:    

Access point mounting screws (4) Suspension wires (2) ¾” Trade conduit connectors for power and data cable openings in the back‐box Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1060‐00 BIM, CAD, and CSI Specifications

Suspended Ceiling Access Point Mount

The Model 1060‐00 wireless access point ceiling mount is designed to provide a secure, convenient, and aesthetic mounting solution for the Cisco 1130 a/g access point. This aesthetic, white powder coated steel 2’ x 2’ ceiling tile‐like mount locks the Cisco 1130a/g in place with a patent pending locking mechanism. Access point moves, adds, and changes can be performed without removing the mount from the ceiling. No ceiling tile cuts are required for installation.

Model 1060‐00 shown with Cisco 1130 a/g AP (not included)

Specifications:        

Economical ceiling mount designed specifically for aesthetic, secure mounting of the Cisco 1130a/g access point Designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: 18 ga. textured white powder‐coated steel flange, 16 ga. aluminum backbox Patent pending locking mechanism, keyed alike, secures AP into the ceiling mount Size: 2’ x 2’ x 2¼” deep Weight: 6lbs (not including access point) Ceiling mount must be supported by the building structure independent of the suspended ceiling

Model 1060‐00 Includes:    

(4) Suspension wires (1) ¾” Trade size conduit connector for data/power cable Security hasp to secure mount to ceiling system or other permanent fixture Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1060‐T BIM, CAD, and CSI Specifications

Suspended Ceiling Access Point Mount

The Model 1060‐T wireless access point ceiling mount is designed to provide a secure, convenient, and aesthetic mounting solution for the Cisco 1130 a/g access point. This aesthetic, white powder coated steel 2’ x 2’ ceiling tile‐like mount locks the Cisco 1130a/g in place with a patent pending locking mechanism. Access point moves, adds, and changes can be performed without removing the mount from the ceiling. The 1060‐T features a 3/8” bevel in the flange around the perimeter, to match “tegular” ceiling tiles commonly used in new construction and renovations. No ceiling tile cuts are required for installation.

Model 1060‐T shown with Cisco 1130 a/g AP (not included), notice the “tegular” flange perimeter

Specifications:         

Economical ceiling mount designed specifically for aesthetic, secure mounting of the Cisco 1130a/g access point Features a 3/8” bevel in the flange around the perimeter, to match “tegular” ceiling tiles Designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: 18 ga. textured white powder‐coated steel flange, 16 ga. aluminum backbox Patent pending locking mechanism, keyed alike, secures AP into the ceiling mount Size: 2’ x 2’ x 2¼” deep Weight: 6lbs (not including access point) Ceiling mount must be supported by the building structure independent of the suspended ceiling

Model 1060‐T Includes:    

(4) Suspension wires (1) ¾” Trade size conduit connector for data/power cable Security hasp, to secure mount to ceiling system or other permanent fixture Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1064‐00 BIM, CAD, and CSI Specifications

Suspended Ceiling Access Point Mount

The Model 1064‐00 wireless access point ceiling mount is designed to provide a secure, convenient, and aesthetic mounting solution for the Cisco 1040/1140/1260/3500/3600 series 802.11n access points. This aesthetic, white powder coated steel 2’ x 2’ ceiling tile‐like mount locks the access point in place with a patent pending locking mechanism. Access point moves, adds, and changes can be performed without removing the mount from the ceiling. No ceiling tile cuts are required for installation. The Model 1064‐T features a 3/8’’ bevel in the flange around the perimeter, to match “tegular” ceiling tiles commonly used in new construction and renovations.

Model 1064‐00 shown with Cisco 1140 series AP (not included)

Specifications:         

Economical ceiling mount designed specifically for aesthetic, secure mounting of the Cisco 1040/1140/1260/3500/3600 series access points Use Cisco AIR‐AP‐BRACKET‐1 for 3600 series and AIR‐AP‐BRACKET‐2 for 3500 series Designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: 18 ga. textured white powder‐coated steel flange, 16 ga. aluminum backbox Patent pending locking mechanism, keyed alike, secures AP into the ceiling mount Size: 2’ x 2’ x 2¼” deep Weight: 6lbs (not including access point) Ceiling mount must be supported by the building structure independent of the suspended ceiling

Model 1064‐00 Includes:    

(4) Suspension wires (1) ¾” Trade size conduit connector for data/power cable Security hasp to secure mount to ceiling system or other permanent fixture Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1064‐T BIM, CAD, and CSI Specifications

Suspended Ceiling Access Point Mount

The Model 1064‐T wireless access point ceiling mount is designed to provide a secure, convenient, and aesthetic mounting solution for the Cisco 1040/1140/1260/3500/3600 series 802.11n access point. This aesthetic, white powder coated steel 2’ x 2’ ceiling tile‐like mount locks the access point in place with a patent pending locking mechanism. Access point moves, adds, and changes can be performed without removing the mount from the ceiling. No ceiling tile cuts are required for installation. The Model 1064‐T features a 3/8’’ bevel in the flange around the perimeter, to match “tegular” ceiling tiles commonly used in new construction and renovations.

Model 1064‐T shown with Cisco 1140 series AP (not included), notice the “tegular” flange perimeter

Specifications:         

Economical ceiling mount designed specifically for aesthetic, secure mounting of the Cisco 1040/1140/1260/3500/3600 series access point Use Cisco AIR‐AP‐BRACKET‐1 for 3600 series and AIR‐AP‐BRACKET‐2 for 3500 series Designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: 18 ga. textured white powder‐coated steel flange, 16 ga. aluminum backbox Patent pending locking mechanism, keyed alike, secures AP into the ceiling mount Size: 2’ x 2’ x 2¼” deep Weight: 6lbs (not including access point) Ceiling mount must be supported by the building structure independent of the suspended ceiling

Model 1064‐T Includes:    

(4) Suspension wires (1) ¾” Trade size conduit connector for data/power cable Security hasp to secure mount to ceiling system or other permanent fixture Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1066‐00 BIM, CAD, and CSI Specifications

Suspended Ceiling Access Point Mount

The Model 1066‐00 wireless access point ceiling mount is designed to provide a secure, convenient, and aesthetic mounting solution for the Aruba Networks AP‐135 series 802.11n access points. This aesthetic, white powder coated steel 2’ x 2’ ceiling tile‐like mount locks the access point in place with a patent pending locking mechanism. Access point moves, adds, and changes can be performed without removing the mount from the ceiling. No ceiling tile cuts are required for installation. The Model 1066‐T features a 3/8’’ bevel in the flange around the perimeter, to match “tegular” ceiling tiles commonly used in new construction and renovations.

Model 1066‐00 shown with Aruba Networks AP‐135 series Wireless Access Point (not included)

Specifications:        

Economical ceiling mount designed specifically for aesthetic, secure mounting of the Aruba Networks AP‐135 series 802.11n wireless access points Designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved OPA # 1638 Construction: 18 ga. textured white powder‐coated steel flange, 16 ga. aluminum backbox Patent pending locking mechanism, keyed alike, secures Access Point into the ceiling mount Size: 2’ x 2’ x 2¼” deep Weight: 6lbs (not including access point) Ceiling mount must be supported by the building structure independent of the suspended ceiling

Model 1066‐00 Includes:    

(4) Suspension (hanger) wires (1) ¾” Trade size conduit connector for data/power cable Security hasp to secure mount to ceiling system or other permanent fixture Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model WC‐AP1240‐X BIM, CAD, and CSI Specifications

Ceiling Enclosure Designed to UL 2043

The Model WC‐AP1240‐X wireless LAN access point enclosure is a locking, ceiling tile insert, designed specifically for the Cisco 1240 series access points. This aesthetic, white powder coated steel enclosure has openings in the door for standard dipole antennas directly attached to the door mounted access point. No antenna cables are required. Installation requires a square opening to be cut into the ceiling tile. The enclosure is supported by two back‐side tile bridges. This Model has been tested to meet UL 2043 Fire Test for heat and visible smoke release in air handling spaces. Model WC‐AP1240‐X shown with Cisco 1242 access point and Cisco Dipole antennas (not included)

Specifications:          

Ceiling tile insert designed specifically for the Cisco 1242 wireless access point UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Meets UL 2043 Fire Test for heat and visible smoke release in air handling spaces; Intertek report #3121942SAT‐002 OSHPD approved. OPA # 1638 Access point attaches directly to door. Standard Cisco dipole antennas protrude through the door. No other antenna options are available with this Model Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 14" x 14", AP Enclosure is 12" x 12" x 3.75” deep Weight: 11lbs (not including access point or antennas) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model WC‐AP1240‐X Includes:     

Mounting screws & hardware (4) Suspension wires, and (2) tile bridges ½” and 1” (trade‐size) cable openings for power and data cable in the back‐box ½” Conduit nipple Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model WC‐AP3500‐X BIM, CAD, and CSI Specifications

Ceiling Enclosure Designed to UL 2043

The Model WC‐AP3500‐X wireless LAN access point mounting solution is a locking ceiling tile insert designed specifically to secure the Cisco 1040/1140/1260/3500/3600 series access points while satisfying UL2043 criteria for heat and visible smoke release in air‐handling spaces. This aesthetic, white powder‐coated all steel enclosure has a bracket in the door to which the access point is attached. When the door is closed, the access point is locked in place and the enclosure preserves the UL2043 criteria. Installation requires a square opening to be cut into the ceiling tile or hard ceiling. The enclosure is supported by two backside tile bridges, and supporting grid wires attached to the structural ceiling support.

Model WC‐AP3500‐X shown with Cisco 3500i wireless access point (not included)

Specifications:           

Ceiling tile insert designed specifically for the Cisco 1040/1140/1260/3500/3600 series wireless APs Use Cisco AIR‐AP‐BRACKET‐1 for 3600 series and AIR‐AP‐BRACKET‐2 for 3500 series UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Meets UL 2043 Fire Test for heat and visible smoke release in air handling spaces; Intertek report #3121942SAT‐002 OSHPD approved. OPA # 1638 Door mounting features for Cisco P/N AIR‐ANT2430V‐R and AIR‐ANT5140V‐R antennas only Construction: Textured white powder‐coated steel, 16 ga. backbox, 14 ga. door Fully hinged locking door, keyed alike Size: Flange is 14" x 14", AP Enclosure is 12" x 12" x 3.75” deep Weight: 11lbs (not including access point or antennas) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model WC‐AP3500‐X Includes:     

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1020‐PS BIM, CAD, and CSI Specifications

Compact Stadium NEMA Enclosure for Cisco Wireless APs

The Model 1020‐PS is a compact NEMA 4 enclosure designed specifically to protect Cisco 1140/1260/3500 series wireless LAN access points in challenging environments such as stadiums. This rugged polycarbonate enclosure protects the access point from weather, dust, and impacts, and is transparent to wireless signals, so access points with body integrated antennas or small detachable antennas may be protected. This is the smallest NEMA enclosure for Cisco access points and is ideal for under seating installation.

Model 1020‐PS shown with Cisco 1260 wireless access point and Cisco Antennas Specifications:        

Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529‐IP66 specifications for use in indoor/outdoor wet, dirty, or corrosive environments. UV stabilized for exposure to direct sunlight. UL listed to UL508. Light gray back box and cover are UL94‐HB rated PBT/PC blended plastic Transparent to wireless signal Cover attaches with six M‐4 stainless steel screws, silicon sponge gasket material provides seal Cover screws must be torqued to 8 in‐lbs Wireless access point max. operating temperature should be de‐rated by 11 °C in the 1020‐PS Interior size: 11.5” x 8.8" x 3.1” deep. Other sizes are available, please contact your Oberon representative Weight: 3 lbs

Model 1020‐PS Includes:  Interior universal mounting plate for Cisco access points  (2) Right angle mounting brackets, pre‐installed  Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1021‐00 BIM, CAD, and CSI Specifications

Stadium NEMA Enclosure for Wireless APs – Screw on Cover

The Model 1021‐00 is a compact NEMA enclosure designed to protect wireless LAN access points from most vendors in challenging indoor/outdoor environments such as stadiums. This rugged polycarbonate enclosure protects the access point from weather, dust, and impacts, and is transparent to wireless signals, so access points with body integrated antennas or small detachable antennas may be protected. The enclosure has a screw on cover and interior universal mounting plate for attaching access points. Enclosures with clear covers are available. Please contact your Oberon representative.

Specifications:         

Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529‐IP66 specifications for indoor/ outdoor wet, dirty, or corrosive environments. UV stabilized for exposure to direct sunlight. UL listed to UL508. Back box and cover are light gray UL94‐5VA PBT/PC blended plastic Transparent to wireless signal Wall mounting holes are outside the sealed area, thus preventing ingress of moisture and dust Cover attaches with 4 large captured plastic screws, gasket is gray poly‐urethane Wireless access point max. operating temperature should be de‐rated by 9 °C in the 1021‐00 Interior size: 10” x 12.4" x 4.8” deep. Other sizes available, please contact your Oberon representative Weight: 3.4 lbs Clear polycarbonate cover is available on request. Please specify “‐C” in model number

Model 1021‐00 Includes:  Interior universal mounting plate for wireless access points  Wall mounting brackets  Installation Instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1025‐00 BIM, CAD, and CSI Specifications

Outdoor NEMA Wall Mount Enclosures

The Model 1025‐00 is a wireless LAN access point enclosure is a 30% fiberglass reinforced polyester NEMA‐4 construction. This indoor/outdoor enclosure has a locking door, and is designed to accommodate access points with detachable or non‐detachable antennas from most manufacturers. Designed to enable a NEMA 4 installation when properly sealed antennas and cable feeds are installed, this construction is virtually transparent to radio frequency signals.

Model 1025‐00 shown with Cisco 1252 and six dipole antennas (not included) NOTE: External antennas require additional holes to be drilled into enclosure

Specifications:        

Designed for mounting on indoor hard walls, where secure mounting is required Internal mounting plate accommodates access points from most manufacturers (2) ¾” trade size cable feed‐through openings in the bottom Typical temperature rise is <10°C with powered access point; to avoid excessive heat build up in the enclosure, avoid direct exposure to sunlight Construction: 30% fiberglass reinforced polyester, grey, paintable, virtually transparent to RF signals Fully hinged locking door, weather‐proof lock; door has a neoprene perimeter gasket Size: 13" x 15" x 6.5” deep Weight: 10.5 lbs

Model 1025‐00 Includes:  (1) ¾” Trade size conduit clamp; (1) hole plug  (4) Stainless steel mounting feet for wall mount and 2 keys for weather‐proof lock  (1) Universal mounting plate  Mounting Instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1026‐00 BIM, CAD, and CSI Specifications

NEMA Enclosure for Wireless APs – Hinged Cover

The Model 1026‐00 is a compact NEMA enclosure designed to protect wireless LAN access points from most vendors in challenging indoor/outdoor environments, such as stadiums. This rugged polycarbonate enclosure protects the access point from weather, dust, and impacts, and is transparent to wireless signals, so access points with body integrated antennas or small detachable antennas may be protected. The enclosure has a fully hinged cover, molded in padlock hasps for locking, & interior mounting plate for attaching access points. Enclosures with clear covers are available. Please contact your Oberon representative.

Specifications:         

Designed to NEMA 3R, 4, 4X, 12, and 13, and IEC529‐IP66 specifications for indoor/ outdoor wet, dirty, or corrosive environments. UV stabilized for exposure to direct sunlight. UL listed to UL50 and UL508A. Back box and cover are light gray UL94‐5VA polycarbonate plastic Transparent to wireless signals Wall mounting holes are outside the sealed area, preventing ingress of moisture and dust Cover is fully hinged. Cover can be latched and/or screwed tight and locked with padlock (not included) Wireless access point max. operating temperature should be de‐rated by 9 °C in the 1026‐00 Interior size: 12” x 10" x 6” deep. Other sizes available, please contact your Oberon representative Weight: 4 lbs Smoked clear polycarbonate cover is available upon request. Please specify as “‐C” in model number

Model 1026‐00 Includes:  Interior universal mounting plate for wireless access points  Wall mounting brackets  Installation Instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1022‐00 BIM, CAD, and CSI Specifications

Wall Mount Enclosures

The Model 1022‐00 wireless LAN access point enclosure is a locking, wall‐mounted enclosure, designed to accommodate access points from most manufacturers. This aesthetic, white powder coated steel enclosure has seven knockouts for antennas and cables. The Model 1022‐00 is large enough to accommodate the Cisco 1250 series, and other 802.11n, wireless access points with six antennas.

Model 1022‐00 shown with (6) optional Oberon 34‐ZDUAL Antennas

Specifications:        

Designed for mounting on indoor hard walls, where secure mounting is required Internal mounting plate accommodates access points from most manufacturers Antennas may be mounted externally using optional bulkhead connectors (Oberon P/N 35‐BULKHD‐ KIT) or Oberon 34‐ZDUAL antennas Beveled corners permit easy installation in the corner of the room Construction: Textured white powder‐coated steel, 18 ga. backbox, 16 ga. door Fully hinged locking door, keyed alike Size: 11" x 12.5" x 4.25”, 3.75" useful depth with universal mounting plate in place Weight: < 7lbs

Model 1022‐00 Includes:  Mounting plate for many manufacturers access points, mounting screws and hardware  (3) Knockouts on both top and bottom permit mounting of up to (6) external antennas  Knockout for ¾" diameter conduit connector (included)  Mounting instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1023‐00 BIM, CAD, and CSI Specifications

Wall Mount Enclosures

The Model 1023‐00 wireless LAN access point enclosure is a locking, wall‐mounted enclosure, designed to accommodate access points from most manufacturers. This aesthetic, white powder coated steel enclosure has seven knockouts for antennas and cables.

1)Model 1023‐00 shown with (3) optional Oberon 34‐ZDUAL Antennas 2)Shown with Cisco 1242 standard dipoles projecting through knockouts

Specifications:         

Designed for mounting on indoor hard walls, where secure mounting is required Internal mounting plate accommodates access points from most vendors Cisco 1242 dipole antennas protrude through standard knockouts Antennas may be mounted externally using optional bulkhead connectors (Oberon P/N 35‐BULKHD‐ KIT) or Oberon 34‐ZDUAL antennas Beveled corners permit easy installation in the corner of the room Construction: Textured white powder‐coated steel, 18 ga. backbox, 16 ga. door Fully hinged locking door, keyed alike Size: 7 ¾" x 11" x 3 ½", 3" useful depth with universal mounting plate in place Weight: < 6lbs

Model 1023‐00 Includes:  Mounting plate for many manufacturers access points, mounting screws & hardware  (3) Knockouts on both top and bottom permit mounting of up to (6) external antennas  Knockout for ¾" diameter conduit connector (included)  Mounting instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1024‐00 BIM, CAD, and CSI Specifications

Wall Mount Enclosures

The model 1024‐00 wireless LAN access point enclosure is a locking, aluminum wall‐mounted indoor/outdoor enclosure, designed to accommodate access points with detachable antennas from most manufacturers, including the Cisco 1250 series access point. This enclosure is designed to enable a NEMA 4 installation when properly sealed antennas and cable feeds are installed.

Model 1024‐00 Shown with (3) optional 34‐BMANT24 and (3) optional 34‐BMANT5 antennas

Specifications:        

Designed for wall or mast mounting indoors or outdoors, where secure mounting is required Universal mounting plate accommodates access points from many vendors. Antennas may be mounted externally using optional bulkhead connectors or Oberon 34‐BMANT24 and 34‐BMANT5 outdoor antennas Knockouts for up to (6) antennas, (2) ¾” trade size cable feedthroughs, and (1) Gore vent (Gore Vent is optional accessory to reduce internal water condensation) Construction: textured white powder coated 16 gauge aluminum Fully hinged locking door, weather‐proof lock. Door has a perimeter gasket and door clamps Size: 11.7” x 13" x 5.5” deep Weight: < 6lbs

Model 1024‐00 includes:  (1) ¾” trade size conduit clamp  (2) keys for weather proof door lock  Universal mounting plate  Mounting instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1027‐00 BIM, CAD, and CSI Specifications

“Hard‐Lid” Ceiling or Wall Mount Enclosures

The Model 1027‐00 wireless LAN access point enclosure is a locking, “hard‐lid” ceiling enclosure, designed to accommodate Wi‐Fi access points, DAS equipment, and antennas from most manufacturers. This aesthetic, white powder coated steel enclosure has openings in the door for up to seven antennas. The door is interchangeable for new doors specific to different manufacturer’s access points and antennas. This enclosure can be flush mounted or surface mounted on hard ceilings or wall.

Model 1027‐00 shown with (4) dipole antennas (not included) mounted on optional bulkhead feed‐through (Oberon part number: 35‐BULKHD‐KIT)

Specifications:         

Designed for surface or flush installation in “hard‐lid” ceilings or walls (drywall, plaster, etc.) Internal universal mounting plate accommodates access points from most manufacturers UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved, OPA # 1638 Antennas may be mounted on the door using optional bulkhead connectors (Oberon P/N 35‐BULKHD‐ KIT) or Oberon 34‐ZDUAL antennas. Doors for other antennas and access points are available. Construction: 18 gauge, textured white powder coated steel Fully hinged locking door, keyed alike Size: Flange is 17.5” x 17.5”, enclosure is 12” x 12” x 4.5” deep, 3.25" useful depth with universal mounting plate in place. Weight: 11 lbs Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1027‐00 Includes:    

Universal mounting plate for most manufacturers access point, mounting screws & hardware (2) ¾” Trade size conduit connectors for power/data cable openings in the back‐box (4) White cosmetic screw caps for #10 ceiling attachment screws (not included) Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1027‐1140/3500/3600 BIM, CAD, and CSI Specifications

“Hard‐Lid” Ceiling or Wall Mount Enclosures

The Model 1027‐1140/3500/3600 wireless LAN access point enclosure is a locking, “hard‐lid” ceiling enclosure, designed specifically to conveniently mount and secure the Cisco 1040/1140/1260/3500/3600 series access points. The door is interchangeable for new doors specific to different manufacturer’s access points and antennas. This enclosure can be flush mounted or surface mounted on hard ceilings or wall.

Model 1027‐1140/3500/3600 shown with Cisco 3600i AP (not included)

Specifications:          

Designed for surface or flush installation in “hard‐lid” ceilings or walls (drywall, plaster, etc.) Designed specifically to conveniently mount and secure the Cisco 1040/1140/1260/3500/3600 series access points. Use Cisco AIR‐AP‐BRACKET‐1 for 3600 series and AIR‐AP‐BRACKET‐2 for 3500 series UL Listed and designed to meet NEC300‐22 and 300‐23 for plenum installations OSHPD approved, OPA # 1638 Antennas may be mounted on the door using optional bulkhead connectors (Oberon P/N 35‐BULKHD‐ KIT) or Oberon 34‐ZDUAL antennas. Doors for other antennas and access points are available. Construction: 18 gauge, textured white powder coated steel Fully hinged locking door, keyed alike Size: Flange is 17.5” x 17.5”, enclosure is 12” x 12” x 4.5” deep, 3.25" useful depth with universal mounting plate in place. Weight: 11 lbs Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1027‐1140/3500/3600 Includes:    

Mounting screws & hardware (2) ¾” Trade size conduit connectors for power/data cable openings in the back‐box (4) White cosmetic screw caps for #10 ceiling attachment screws (not included) Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1029‐00 BIM, CAD, and CSI Specifications

Wall Mount Enclosures

Many wireless access point manufacturers recommend that the access point be mounted in a “horizontal” orientation to achieve best wireless coverage. Horizontal mounting may be difficult in hard lid and other environments where the access point is mounted on the wall. Oberon’s Model 1029‐00 wireless LAN access point wall mount bracket is designed to mount and secure access points from most manufacturers in areas were wall mounting is required. This aesthetic, white powder coated steel mounting bracket is ideal for mounting the access point in the preferred “horizontal” orientation. Conduit, raceways, and cable can be securely terminated inside the enclosure to provide for a clean appearance. The access point can be locked in place using the manufacturer’s bracket lock feature.

1) Model 1029‐00 shown with Cisco 1040 access point (not included) 2) 1029‐00 with cover off & wall plate (not included)

Specifications:  

   

Designed for mounting on indoor walls, where secure horizontal mounting is required Designed for Cisco 1040/1140/1260/3500/3600 series and Aruba Networks AP105/121/125/135 access points. Other access points can be mounted using optional universal mounting plates. Ask your Oberon representative for details. Knockouts on two sides and top for 1/2” trade size conduit clamps 2 part Construction: textured white powder coated 18 gauge steel right angle bracket and cover Size: 9" x 6" wide x 5” tall Weight: 3.5 lbs with out equipment

Model 1029‐00 Includes:    

(4) #8 screws for Cisco bracket (4) #6 screws for Aruba Networks bracket (4) screws for the cover Mounting Instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

BIM, CAD, and CSI Specifications

Model 1030‐00

“Hard‐Lid” Ceiling or Wall Mount Enclosures

Oberon’s Model 1030‐00 “hard lid” or wall mount enclosure provides a secure, aesthetic, convenient mounting solution for wireless access points from most vendors. The enclosure has a low profile impact resistant ABS dome so that wireless access points with integrated or non‐detachable antennas can be secured in otherwise unsecured spaces. The product is UL listed and designed to satisfy National Electric Code (NEC) paragraphs 300‐22 and 300‐23 for installation in the air handling space. Locks are “keyed‐alike” to simplify moves, adds, and changes. An optional suspended ceiling flange kit, 1030‐FLANGE, permits the Model 1030‐00 to be mounted in a standard 2’ x 2’ suspended ceiling system.

Oberon Model 1030‐00 wireless LAN access point enclosure shown with Cisco 1142 access point (not included)

Specifications:  Wireless access point enclosure designed to be surface mounted on “hard‐lid” ceilings or walls.  Designed to accommodate wireless access points from most vendors with integrated or non‐ detachable antennas  UL listed and designed to meet NEC300‐22 and 300‐23 for air handling space installations  OSHPD approved (OPA # 1638)  Construction: 16 gauge, powder coated steel back box, fully hinged locking door with UL 94‐5VA ABS plastic  Dome is impact resistant and transparent to wireless signals  Knockouts for ¾” trade conduit connectors and snap‐in keystone jacks and connectors  Opening in back box for wall jacks  Size: 17" x 17" x 3 ½" (total depth), the dome is 12” x 12” x 2”  Weight: 13 lbs (not including access point)  Suspended ceiling flange kit (part number 1030‐FLANGE) is optional  If enclosure is in flange it must be supported by the building ceiling structural system, not tile gridwork. Model 1030‐00 Includes:  (1) Universal access point mounting plate  (1) ½” Trade size conduit connector  (2) Keys for lock  (4) # 6‐32 x 3/16 Screws  (4) # 8‐32 x 3/16 Screws  Mounting Instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1032‐00 BIM, CAD, and CSI Specifications

“Hard‐Lid” Ceiling or Wall Mount Enclosures for WAPs

Oberon’s Model 1032‐00 “hard lid” or wall mount enclosure provides a secure, aesthetic, convenient mounting solution for wireless access points from many vendors. This economical enclosure has a low profile impact resistant ABS dome so that wireless access points with integrated or non‐detachable antennas can be secured in otherwise “unsecured” spaces. The product is designed to provide an unobtrusive mounting solution. Locks are keyed‐alike to simplify moves, adds, and changes.

Specifications:        

Wireless access point enclosure designed to be surface mounted on “hard‐lid” ceilings or walls. Economical solution for securing wireless access points with integrated or non‐detachable antennas, from most vendors Construction: 16 gauge powder coated steel back box, UL 94‐5VA ABS plastic cover Fully hinged locking cover is impact resistant and transparent to wireless signals Knockouts for ¾” trade conduit connectors, and snap‐in keystone jacks and connectors Opening in back box for wall jack Size: 11" x 11" x 4.4" (total depth) Weight: 4.5 lbs (not including access point)

Model 1032‐00 Includes:     

(1) Universal access point mounting plate (2) Keys for lock Mounting Instructions (4) # 6‐32 x 3/16 Screws (4) # 8‐32 x 3/16 Screw

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1032‐C BIM, CAD, and CSI Specifications

“Hard‐Lid” Ceiling or Wall Mount Enclosures

Oberon’s Model 1032‐C “hard lid” or wall mount enclosure provides a secure, aesthetic, convenient mounting solution for wireless access points from many vendors. This economical enclosure has an impact resistant, clear, lockable polycarbonate cover so that wireless access points with integrated or non‐detachable antennas can be secured in otherwise unsecured spaces. The product is designed to provide an unobtrusive mounting solution. Locks are keyed‐alike to simplify moves, adds, and changes.

Model 1032‐C shown with Cisco 3500i AP (not included).

Specifications:        

Wireless access point enclosure designed to be surface mounted on “hard‐lid” ceilings or walls. Economical solution for securing wireless access points with integrated or non‐detachable antennas, from most vendors Construction: 16 gauge powder coated steel back box, UL 94‐V2 polycarbonate cover Fully hinged locking cover is impact resistant and transparent to wireless signals Knockouts for ¾” trade conduit connectors, and snap‐in keystone jacks and connectors Opening in back box for wall jack Size: 11" x 11" x 4.4" (total depth) Weight: 4.5 lbs (not including access point)

Model 1032‐C Includes:     

(1) Universal access point mounting plate (2) Keys for lock Mounting Instructions (4) # 6‐32 x 3/16 Screws (4) # 8‐32 x 3/16 Screw

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1070

BIM, CAD, and CSI Specifications

Ceiling Mounted Telecommunications Enclosures

Oberon’s Model 1070 ceiling mounted telecommunications enclosure is a secure, convenient, and aesthetic telecommunications enclosure for rack mountable Ethernet switches, patch panels, wireless controllers and other networking and A/V components. The 1070 has mounting brackets for up to 2 standard (1U) rack mountable components, and back‐box openings to mount a patch panel and CCH fiber optic adaptor panel. The enclosure has a highly perforated door to allow airflow, for fan‐less operation. The 1070 is ideal for structured cabling and Fiber–to‐the‐Enclosure (FTTE) deployments. The enclosure can be used to shorten home‐runs to improve data rate and network capacity.

Model 1070‐BL Model 1070‐WH

Model 1070 Telecommunications Enclosure shown with 48‐port Ethernet Switch and Patch Panel (not included)

Specifications:         

Telecommunications Enclosure (TE) designed for suspended ceiling environments Designed to accommodate up to 2 standard (1U) rack mountable components Includes back‐box openings for standard (1U) rack mountable patch panel and a CCH fiber optic adaptor panel (not included) UL Listed and is designed to satisfy National Electric Code (NEC) paragraphs 300‐22 and 300‐23 for installation in the air handling space Designed to fit into 2’ x 2’ ceiling tile grid‐work, accommodates networking equipment up to 2U deep and 14” in length Construction: Black powder coated aluminum Highly perforated door permits air‐flow without a fan. De‐rate networking equipment by 13º F (This is comparable to the temperature rise in an open rack). Weight: 7 lbs (not including networking equipment) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1070 Includes:      

(1) AC Junction box, receptacle, cover and screws (1) ½” Trade size conduit connector Grounding lug (4) Rack mounting screws Installation instructions Available in Black (1070‐BL) and White (1070‐WH)

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1070 (Cont.)

Ceiling Mounted Telecommunications Enclosures

An opening in the back box accommodates a standard 1U rack mountable patch panel (not included). This permits simplified cable management.

An opening in the side wall accommodates a Closet Connector Housing (CCH) style fiber optic adaptor panel for Fiber To the Enclosure (FTTE) deployments (CCH not included).

A highly perforated door permits passive air‐flow for fan‐less operation. The locking door uses a gas spring opener.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1072‐00 BIM, CAD, and CSI Specifications

Ceiling Mounted Telecommunications Enclosures

The Model 1072‐00 is a locking 2’ x 2’ ceiling tile telecommunications enclosure designed for in‐building wireless and wireless LAN components, including Wi‐Fi access points, DAS remote access units, smaller access switches, fiber optic adaptor panels and rack mounted patch panels. The enclosure includes a universal mounting plate for access points and brackets for rack mountable in‐building wireless components. This aesthetic, white powder coated aluminum enclosure has openings in the door for up to eleven antennas, including larger multi‐carrier cellular antennas. No ceiling tile cuts are required for installation.

Model 1072‐00 shown with (6) optional Oberon 34‐ZDUAL Antennas and Oberon 34‐MULTI‐CARRIER cellular antenna (optional)

Specifications:           

2’ x 2’ Ceiling tile telecommunications enclosure designed for multiple networking components Accommodates most manufacturers’ wireless LAN access points with Oberon universal mounting plate P/N 38‐1052‐MNT‐KIT (2 included). Designed to meet NEC300‐22 and 300‐23 for plenum installations (all metal construction) OSHPD approved OPA # 1638 (up to 25lbs total weight) Openings in door for up to eleven external 802.11 Wi‐Fi or cellular/PCS multi‐carrier antennas 19” rack mounting brackets for 2U deep equipment, opening in back box for 19” patch panel and CCH style fiber optic adapter panel Construction: 16 ga. back‐box, 14 ga. door textured, white, powder coated aluminum Fully hinged locking door, keyed alike Size: Flange is 24” x 24”, Back box is 22.5" x 22.5 " x 4.5" deep Weight: 11.5lbs (not including internal equipment) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1072‐00 Includes:  Access point mounting screws and universal mounting plates  (4) Suspension wires, mounting instructions  (2) ¾” Trade size conduit connectors for power/data cable openings in the back‐box  UL Listed Junction box, receptacle, and cover plate for ac power Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1090‐00 BIM, CAD, and CSI Specifications

Low Voltage Ceiling Mounted Workspace Telecommunications l

The Model 1090‐00 is a locking 2’ x 2’ suspended ceiling mounted, workspace telecommunications enclosure (WTE) designed for passive and low voltage networking equipment, including patch panels, fiber optic adaptor panels, PoE powered Wi‐Fi access points, DAS remote access units, and PoE powered access switches. The enclosure includes adjustable rack mounting brackets for installing up to 2U deep 19” rack mountable equipment. This WTE is ideal as a ceiling mounted consolidation point enclosure in zone cabling or structured cabling designs. No ceiling tile cuts are required for installation.

Specifications:          

2’ x 2’ Ceiling tile workspace telecommunications enclosure (TE) designed for passive or low voltage networking components. Can serve as a consolidation point enclosure Accommodates most manufacturers’ wireless LAN access points or DAS remote access units with Oberon universal mounting plate P/N 38‐1052‐MNT‐KIT (optional) Adjustable 19” rack mounting brackets for 2U deep equipment Designed to meet NEC300‐22 and 300‐23 for air handling space installations (all metal construction) OSHPD approved OPA # 1638 (up to 25lbs total weight) Construction: 16 ga. back‐box and door textured, white, powder coated aluminum Fully hinged locking door, keyed alike Size: Fits in standard 2’ x 2’ ceiling grid, back box is 22.5" x 22.5 " x 4.5" deep Weight: 15.5lbs (not including internal equipment) Ceiling enclosure must be supported by the building structure independent of the suspended ceiling

Model 1090‐00 Includes:  (2) pair of rack mount brackets  (4) Suspension wires, mounting instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1082‐00 BIM, CAD, and CSI Specifications

Cabinets for Organizing Network Components

Oberon’s Model 1082‐00 is a wall mounted home/office cabinet for organizing your networking components. The 1082‐00 provides a convenient way to interconnect and stow your broadband modem, wireless router, small network switch, power strip, network storage, and other components. This 22” x 22” cabinet has a steel back box with adjustable shelves for components and wire tie‐ downs to manage the data and power wiring. The cabinet has a locking, impact resistant ABS door which is virtually transparent to wireless signals. The cabinet mounts on the wall in minutes, and aesthetically secures all of your networking components. The cabinet’s low 4” profile allows the cabinet to be mounted just about anywhere in your home or office.

Oberon Model 1082‐00 show with switch, patch panel, wireless router, and DSL modem (not included)

Specifications:        

Wall mounted network components cabinet for wireless routers, broadband modems, small switches, power strips, network storage and other components from most manufacturers Construction: 16 ga. Textured white powder coated steel back box. Openings in the back box permit the cabinet to be mounted directly over the broadband connector or network wall plate The cabinet back‐box has mounting features for 3 adjustable shelves, or (optional) 19” rack mounting brackets for up to 2U deep equipment Openings in the top and bottom for cable raceway or conduit entry Fully hinged locking door is made of impact resistant, wireless signal transparent, ABS plastic Cabinet size: 22” x 22” x 4” deep Cabinet can be mounted in any room, complies with ADA accessibility guidelines for protruding objects

Model 1082‐00 includes:  (3) adjustable shelves  (10) plastic cable tie downs  100” of Velcro strap  (2) door keys  Installation instructions Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Wireless Router Box (WR‐BOX) BIM, CAD, and CSI Specifications

Cabinets for Organizing Network Components

Oberon’s Wireless Router Box is a wall mounted home/office cabinet for conveniently organizing smaller wireless routers and broadband modems. The WR‐BOX is made of ABS plastic so it won’t attenuate the wireless signal from the wireless router. This 14” x 9” x 4” deep box can be flush mounted by cutting an opening in the wall (or ceiling) and attaching to wall studs, or surface mounted using appropriate wall anchors. The WR‐BOX includes two universal electronics brackets with Velcro straps for mounting a wireless router and a broadband modem (or other components). The box’s low 4” profile allows the cabinet to be mounted just about anywhere in your home or office.

Oberon WR‐BOX shown with wireless router and DSL modem (not included)

Specifications:        

Wall mounted network components box for smaller wireless routers, broadband modems, or wireless router modems from most manufacturers Box has 3 top, 3 bottom, 3 rear cable entry knockouts, and 110 Power knockout for AC power outlet Mounting tabs for fastening to wall studs, dry wall markings for flush mountings Detachable, padlock‐able door (padlock not included) Construction: Light weight ABS plastic, transparent to wireless signals Box size: 14” x 9” x 4” deep. Fits between wall studs on 16” centers Box can be mounted in any room wall or ceiling, flush or surface mount Manufacturer: ICC

Model WR‐BOX includes:  (2) Adjustable position, snap‐in, universal electronics brackets for network components  (8) 8” Velcro straps plastic cable tie downs  (4) #10‐24 x 1” Wood screws for installation  (2) #6‐32 x 7/8” Pan head machine screw for fastening cover  (1) Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐52‐1140/3500/3600 BIM, CAD, and CSI Specifications

Adaptor Doors

Oberon’s Model 1052‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for the Cisco 1242, Cisco 1232, and Aruba Networks AP‐70 access points. With many Cisco customers making the migration from the Cisco 1242 to the Cisco 1040/1140/1260/3500/3600 series 802.11n wireless access point, Oberon has designed the 38‐52‐1140/3500/3600 adaptor door so that customers may install the new access point in the existing enclosure, without removing the enclosure from the ceiling. The upgrade simply requires that the existing 1052‐00 door is removed (three interior nuts), the new access point is attached to the adaptor door, and the adaptor door is attached to the enclosure. The upgrade maintains the enclosure’s UL 50 design criteria, and provides the same level of physical security as previously provided. Upgrades are performed without accessing the air handling space above the ceiling.

1) Model 1052‐00 shown with 38‐52‐1140/3500/3600 and Cisco 1142 AP (not included) 2) Exploded view of the door, access point, access point mounting bracket, and assembly mount bracket

Specifications:      

Adaptor door designed to mount the Cisco 1040/1140/1260/3500/3600 series 802.11n wireless access point into existing Oberon Model 1052‐00 ceiling tile enclosures Use Cisco AIR‐AP‐BRACKET‐1 for 3600 series and AIR‐AP‐BRACKET‐2 for 3500 series With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐52‐1140/3500/3600 Includes:   

Adaptor door Assembly mount bracket and nuts Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐52‐3500e BIM, CAD, and CSI Specifications

Adaptor Doors

Oberon’s Model 1052‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for the Cisco 1242, Cisco 1232, and Aruba Networks AP‐70 access points. With many Cisco customers making the migration from the Cisco 1242 to the Cisco 1260, 3500e, 3600e series “connectorized” 802.11n wireless access point, Oberon has designed the 38‐52‐3500e adaptor door so that customers may install the new access point in the existing enclosure, without removing the enclosure from the ceiling. This adaptor door provides clearance for the access point and antenna connectors and cables. The upgrade simply requires that the existing 1052‐00 door is removed (three interior nuts), the new access point is installed into the enclosure, the new door is attached to the enclosure, and antennas are attached to the door. The upgrade maintains the enclosure’s UL 50 design criteria, and provides the same level of physical security as previously provided. Upgrades are performed without accessing the air handling space above the ceiling. Note that this adaptor door is only required on 1052‐00 rev. 11 (3.25” deep) or prior 1052‐00 enclosures. Rev. 12 (4.5” deep) and later 1052‐00s are deep enough for these connectorized access points.

1) Model 1052‐00 shown with 38‐1052‐ADPDOOR‐1140/3500I and Cisco 1142 AP (not included) 2) Exploded view of the door, access point, access point mounting bracket, and assembly mount bracket

Specifications:     

Adaptor door designed to permit the Cisco 1260/3500e/3600e series “connectorized” 802.11n wireless access point into existing Oberon Model 1052‐00 ceiling tile enclosures With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐52‐3500e Includes:  

Adaptor door Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐52‐AP105 BIM, CAD, and CSI Specifications

Adaptor Doors

Oberon’s Model 1052‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for the Cisco 1242, Cisco 1232, and Aruba Networks AP‐70 access points. For customers making the migration to the Aruba Networks AP105 802.11n wireless access point, Oberon has designed the 38‐52‐AP105 adaptor door so that customers may install the new access point in the existing enclosure without removing the enclosure from the ceiling. The upgrade simply requires that the existing 1052‐00 door is removed (three interior nuts), the new access point is attached to the adaptor door, and the adaptor door is attached to the enclosure. The upgrade maintains the enclosure’s UL 50 design criteria, and provides the same level of physical security as previously provided. Upgrades are performed without accessing the air handling space above the ceiling.

1) Model 1052‐AP105 shown with 38‐52‐AP105 and Aruba Networks AP105 access point (not included) 2) Exploded view of the door, access point, and bracket

Specifications:     

Adaptor door designed to mount the Aruba Networks AP105 802.11n wireless access point into existing Oberon Model 1052‐00 ceiling tile enclosures With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐52‐AP105 Includes:   

Adaptor door Assembly mount bracket and nuts Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐52‐AP135 BIM, CAD, and CSI Specifications

Adaptor Door

Oberon’s Model 1052‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for the Cisco 1242, Cisco 1232, and Aruba Networks AP‐70 access points. For customers making the migration to the Aruba Networks AP135 802.11n wireless access point, Oberon has designed the 38‐52‐AP135 adaptor door so that customers may install the new access point in the existing enclosure without removing the enclosure from the ceiling. The upgrade simply requires that the existing 1052‐00 door is removed (three interior nuts), the new access point is attached to the adaptor door, and the adaptor door is attached to the enclosure. The upgrade maintains the enclosure’s UL 50 design criteria, and provides the same level of physical security as previously provided. Upgrades are performed without accessing the air handling space above the ceiling.

1) Model 1052‐AP135 shown with Aruba Networks AP135 access point (not included) 2) Exploded view of the door, access point, and bracket

Specifications:     

Adaptor door designed to mount the Aruba Networks AP135 802.11n wireless access point into existing Oberon Model 1052‐00 ceiling tile enclosures With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐52‐AP135 Includes:   

Adaptor door Assembly mount bracket and nuts Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐52‐CCOANT BIM, CAD, and CSI Specifications

Adaptor Doors

Oberon’s Model 1052‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for the Cisco 1242. With many Cisco customers making the migration from the Cisco 1242 to the Cisco 1260/3500e/3600e series 802.11n wireless access point, Oberon has designed the 38‐1052‐CCOANT adaptor door so that customers may install the new access point in the existing enclosure, without removing the enclosure from the ceiling. The upgrade simply requires that the existing 1052‐00 door is removed (three interior nuts), the new access point is attached to the adaptor door, and the adaptor door is attached to the enclosure. The upgrade maintains the enclosure’s UL 50 design criteria, and provides the same level of physical security as previously provided. Upgrades are performed without accessing the air handling space above the ceiling.

1) Model 1052‐00 shown with 38‐52‐CCOANT door, 3500e AP (not included), and Cisco AIR‐ANT2430V‐R and AIR‐ANT5140V‐R antennas (not included)

Specifications:     

Adaptor door designed to mount the Cisco 1260/3500e/3600e series 802.11n wireless access point into existing Oberon Model 1052‐00 ceiling tile enclosures With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐1052‐CCOANT Includes:   

Adaptor door Assembly mount bracket and nuts Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐52‐ENT3610 BIM, CAD, and CSI Specifications

Adaptor Doors

Oberon’s Model 1052‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for most vendor’s wireless LAN access points with detachable antennas. For those 1052‐00 customers migrating to the Enterasys AP3605/AP3610/AP3630 wireless access points with body integrated antennas, Oberon has designed the 38‐52‐ENT3610 retrofit door. The ENTERASYS retrofit door replaces the standard 1052‐00 door. The access point is attached to a mounting bracket, which is then attached to the interior of the retrofit door. The door is then closed and locked. The solution is secure and aesthetic, and retains the original UL50 design criteria. Upgrades are performed without accessing the air handling space above the ceiling.

1) Model 1052‐00 shown with 38‐52‐ENT3610 retrofit door and Enterasys 3610 AP (not included) 2) Exploded view of the adaptor door, access point, access point mounting bracket, and assembly mount bracket

Specifications:      

Retrofit door designed to mount the Enterasys AP3605, AP3610 or AP3630 series 802.11n wireless access point into existing Oberon Model 1052‐00 ceiling tile enclosure UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐52‐ENT3610 Includes:   

Adaptor door Assembly mount bracket and nuts Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐52‐HFHS‐N BIM, CAD, and CSI Specifications

Adaptor Doors

Oberon’s Model 1052‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for the Cisco 1242, Cisco 1232, and Aruba Networks AP‐70 access points. This adaptor door is designed specifically for the Enterasys HiPath 3620/3640 802.11n access point. Oberon has designed the 38‐ 52‐HFHS‐N adaptor door so that customers may install the new access point in the existing enclosure, without removing the enclosure from the ceiling. The upgrade simply requires that the existing 1052‐00 door is removed (three interior nuts), the new access point is attached to the adaptor door, and the adaptor door is attached to the enclosure. The upgrade maintains the enclosure’s UL 50 design criteria, and provides the same level of physical security as previously provided. Upgrades are performed without accessing the air handling space above the ceiling.

Model 1052‐00 shown with 38‐52‐HFHS‐N door and Enterasys HiPath 3620 access point and MIMO dual band antenna (not included)

Specifications:      

Ceiling tile enclosure specifically designed for Enterasys HiPath 3620/3640 access point OSHPD approved OPA # 1638 With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐52‐HFHS‐N Includes:   

Adaptor door Assembly mount bracket and nuts Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐53‐1140/3500/3600 BIM, CAD, and CSI Specifications

Adaptor Doors

Oberon’s Model 1053‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for the Cisco 1250 series wireless access points. With many Cisco customers making the migration from the Cisco 1250 series to the Cisco 1040/1140/1260/3500/3600 series 802.11n wireless access point, Oberon has designed the 38‐53‐1140/3500/3600 adaptor door so that customers may install the new access point in the existing enclosure, without removing the enclosure from the ceiling. The upgrade simply requires that the existing 1053‐00 door is removed (three interior nuts), the new access point is attached to the adaptor door, and the adaptor door is attached to the enclosure. The upgrade maintains the enclosure’s UL 50 design criteria, and provides the same level of physical security as previously provided. Upgrades are performed without accessing the air handling space above the ceiling.

1) Model 1053‐00 shown with 38‐53‐1140/3500/3600 and Cisco 1142 AP (not included) 2) Exploded view of the door, access point, access point mounting bracket, and assembly mount bracket

Specifications:      

Adaptor door designed to mount the Cisco 1040/1140/1260/3500/3600 series 802.11n wireless access point into existing Oberon Model 1053‐00 ceiling tile enclosures Use Cisco AIR‐AP‐BRACKET‐1 for 3600 series and AIR‐AP‐BRACKET‐2 for 3500 series With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐53‐1140/3500/3600 Includes:   

Adaptor door Assembly mount bracket and nuts Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 38‐53‐AP105 BIM, CAD, and CSI Specifications

Adaptor Doors

Oberon’s Model 1053‐00 wireless LAN access point enclosure is a locking 2’ x 2’ ceiling tile enclosure originally designed for the Cisco 1250 series wireless access points. For customers making the migration to the Aruba Networks AP105 802.11n wireless access point, Oberon has designed the 38‐53‐AP105 adaptor door so that customers may install the new access point in the existing enclosure, without removing the enclosure from the ceiling. The upgrade simply requires that the existing 1053‐00 door is removed (three interior nuts), the new access point is attached to the adaptor door, and the adaptor door is attached to the enclosure. The upgrade maintains the enclosure’s UL 50 design criteria, and provides the same level of physical security as previously provided. Upgrades are performed without accessing the air handling space above the ceiling.

1) Model 1053‐AP105 shown with 38‐53‐AP105 door and Aruba Networks AP105 access point (not included) 2) Exploded view of the door, access point, and bracket

Specifications:     

Adaptor door designed to mount the Aruba Networks AP105 802.11n wireless access point into existing Oberon Model 1053‐00 ceiling tile enclosures With adaptor door properly installed, the assembly is UL listed and designed to meet NEC300‐22 and 300‐23 for plenum installations Construction: Textured white powder‐coated steel, 14 ga. door Fully hinged locking door, keyed alike. Adaptor door is attached to enclosure with (3) nuts

Model 38‐53‐AP105 Includes:   

Adaptor door Assembly mount bracket and nuts Installation instructions

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model CCOAPi‐SKIN BIM, CAD, and CSI Specifications

Skin for Cisco WAPs

Oberon’s CCOAPi‐SKIN allows you to customize the appearance of the popular Cisco 1040, 1140, 3500i, 3600i series wireless access point. The skin is made from an RF transparent plastic, and can be attached directly to the Cisco 1040, 1140, 3500i, or 3600i. The CCOAPi‐SKIN is paintable so allows you to customize the color of the access point to partially conceal the access point or compliment interior color schemes.

Oberon Model CCOAPi‐SKIN shown with Cisco 1142 wireless access point (not included)

Specifications:     

Fabricated from textured UL 94‐5VA ABS plastic The skin is virtually transparent to access point wireless signals. Attaches to access point with mushroom head fasteners (included) Standard color is black Skins are paintable

Model CCOAPi‐SKIN Includes:  

Ordering Information: P/N CCOAPi‐SKIN Four (4) mushroom head fasteners

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Model 1260/3500e‐SKIN BIM, CAD, and CSI Specifications

Skin for Cisco WAPs

Oberon’s 1260/3500e‐SKIN allows you to customize the appearance of the popular Cisco 1260 and 3500e series wireless access point. The skin is made from an RF transparent plastic, and can be attached directly to the Cisco 1260 or 3500e. The 1260/3500e‐SKIN is paintable so it allows you to customize the color of the access point to partially conceal the access point or compliment interior color schemes.

Oberon Model 1260/3500e‐SKIN shown with Cisco 1260 wireless access point (not included)

Specifications:     

Fabricated from textured UL 94‐5VA ABS plastic The skin is virtually transparent to access point radio frequency transmission. Attaches to access point with mushroom head fasteners (included) Standard color is black Skins are paintable

Model 1260/3500e‐SKIN Includes:  

Ordering Information: P/N 1260/3500e‐SKIN Four (4) mushroom head fasteners

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Custom Wireless LAN Access Point Enclosures Oberon offers one of the industries broadest ranges of wireless access point enclosures to meet your wireless deployment needs. This means that you will probably find what you need in this catalog, however, if you find an application where you need a customized solution, Oberon can design enclosures and system components for practically any network connection requirement. Using our existing design database, Oberon can quickly and economically design electronic equipment enclosures, which accommodate most manufacturers’ products. Contact your Oberon representative for details.    

Aesthetically pleasing, locking, plenum rated ceiling enclosures Vandal, tamper, and theft resistant indoor enclosures Architecturally benign or discrete electronics enclosures Indoor/outdoor NEMA 4/ 3R enclosures

Applications:  Wireless LAN access points and radio bridges  Network Cameras  Indoor and outdoor cellular repeaters and converters  Wireless asset tracking and RFID  Security sensors  PICs and PLCs  Embedded processors  Other sensors These additional features add value to, and simplify, your installation:  Integrated single, diversity, directional, or omni‐directional antennas  Antenna swivel mounts  Integrated RF connectors and RF jumper cables  Weather proof and tamper resistant locks  Heaters and blowers for outdoor installations  Cord grips for field termination of data cables  Weather proof Ethernet connectors  Clear acrylic domes and doors  Integrated AC power receptacles, conduit clamps, and grounding features  Lightning arrestors and surge suppressors  POE splitters  Serial to Ethernet adaptors  PICs  Embedded controllers  Cellular Modems  UL Listing  OSHPD Compliant

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Product Modification – From Concept to Production Step 1: Make changes to an existing drawing, create a sketch, or send us an actual product sample for which you would like to have an enclosure designed

Step 2: Using our 3D CAD software, we can create prints and 3D Models of your custom design for you to approve prior to actual production.

With a minimum order, Oberon can customize any existing enclosure or create a new enclosure to your specifications. Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐ZDUAL‐KIT DUAL BAND WI‐FI ANTENNA General Specifications:

ANTENNA

This antenna provided superior pattern coverage for indoor applications operating in 2400‐2500 MHz, as well as 4900 to 5825 MHz. This economical model provided industry leading wideband performance and omni‐ direcional gain. It features an attractive, compact package that is ideal for indoor applications where aesthetics are important.

Dual band Low Profile Antenna

Radome Material: UL 94‐V0 PC/ABS

Polarization: Vertical, Linear

Nominal Impedance: 50 Ohms

Cable: 16” Plenum rated RG‐58/U PL

Connector Options: Reverse Polarity TNC Reverse Polarity SMA

Mounting Method: Through hole 15/16 dia (0.94) 7/8‐14 UNF plastic Hex‐Nut

Electrical Specifications Frequency Range

Nominal Gain

H‐Plane Beamwidth

E‐Plane Beamwidth

VSWR

Maximum Input Power

2400‐2500 MHz

4 dBi

Omni‐directional

35° Nominal

< 2.0:1

10 Watts

4900‐5825 MHz

4 dBi

Omni‐directional

20° Nominal

< 2.0:1

10 Watts

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐ZDUAL‐KIT DUAL BAND WI‐FI ANTENNA (Cont.)

ANTENNA

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐MIMO WI‐FI ANTENNA

ANTENNA

This very aesthetic indoor antenna provides for simple IEEE 802.11n MIMO upgrades for access points with 3connectors. The antenna pattern is designed for ceiling mounted installations. This antenna is to be used in Oberon’s Model 1052‐HFHS‐N ceiling‐mounted wireless access point enclosure. The antenna simply clips into the enclosure door for a clean professional look. The antenna’s PVC/Acrylic cover is color matched to the enclosure.

Model #34-MIMO-HFHS Specifications MODEL CONNECTOR 34‐MIMO RPSMA GROUND PLANE SIZE Ground Plane Independent 308 X 2 X92 mm

FREQ RANGE 2400‐2485 MHz 4900‐5900 MHz PIG TAIL 3” X 36” Plenum Rated

GAIN 3 DBi 4 dBi TEMP RANGE Indoor Office Environment

VSWR <2:1 <2:1 WEIGHT 0.39 kg

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐ZMIMO3X1 DUAL BAND 3‐PORT WI‐FI ANTENNA

ANTENNA

This very aesthetic indoor antenna provides for simple IEEE 802.11n MIMO upgrades for access points with 3 connectors. The antenna pattern is designed for ceiling mounted installations. The three plenum rated cables exit from one stud mount in the antenna, requiring specification of, or replacement, of the door in Oberon’s Model 1052, 1072, and other ceiling mounted enclosures. (The upgrade door for the 1052 is the 38‐ADPDOORZMIMO3X1). The antenna’s cover is a textured UL94 V‐0 plastic which is color matched to the enclosure.

Model #34-ZMIMO3X1 Specifications MODEL CONNECTOR 34‐ZMIMO3X1 (3) RPSMA (3) RPTNC GROUND PLANE SIZE Ground Plane Independent 9.1” X 6.6” X 1.6”

FREQ RANGE 2400‐2500 MHz 4900‐5900 MHz PIG TAIL (3) 5’ RG58/U CL2P

GAIN 2.5 DBi 3 dBi TEMP RANGE Indoor Office Environment

VSWR <2:1 <2:1 WEIGHT 1.5 lbs.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐ZMIMO6X1 DUAL BAND 6‐PORT WI‐FI ANTENNA

ANTENNA

This very aesthetic indoor antenna provides for simple IEEE 802.11n MIMO upgrades for access points with 6 connectors. The antenna pattern is designed for ceiling mounted installations. The six plenum rated cables exit from two stud mounts in the antenna, requiring specification of, or replacement, of the door in Oberon’s Model 1052, 1072, and other ceiling mounted enclosures. (The upgrade door for the 1052 is the 38‐ADPDOORZMIMO6X1). The antenna’s cover is a textured UL94 V‐0 plastic which is color matched to the enclosure.

Model #34-ZMIMO6X1 Specifications MODEL CONNECTOR 34‐ZMIMO3X1 (6) RPSMA (6) RPTNC GROUND PLANE SIZE Ground Plane Independent 9.1” X 6.6” X 1.6”

FREQ RANGE 2400‐2500 MHz 4900‐5900 MHz PIG TAIL (6) 3’ RG58/U CL2P

GAIN 2.5 DBi 3 dBi TEMP RANGE Indoor Office Environment

VSWR <2:1 <2:1 WEIGHT 1.5 lbs.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐ZMIMO6X1 DUAL BAND WI‐FI ANTENNA (Cont.)

ANTENNA

Elevation (E‐Plane) Pattern in 2.4 GHz band with antenna mounted on the 1052‐SCCO enclosure, as if enclosure is on the horizontal axis, 180 degrees is in the workspace, and 0 degrees is above the ceiling

Elevation (E‐Plane) Pattern in 5 GHz band with antenna mounted on the 1052‐SCCO enclosure, as if enclosure is on the horizontal axis, 180 degrees is in the workspace, and 0 degrees is above the ceiling

Horizontal (H‐Plane) Pattern in 2.4 GHz band with antenna mounted on 1052‐SCCO enclosure

Horizontal (H‐Plane) Pattern in 5 GHz band with antenna mounted on 1052‐SCCO enclosure

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐DMDUAL‐KIT DUAL BAND WI‐FI ANTENNA

ANTENNA

This antenna provided pattern coverage for indoor applications operating in 2400‐2485 MHz, as well as 5150 to 5830 MHz. This economical dome style model provided industry leading wideband performance and omni‐direcional gain. It features an attractive, compact package that is ideal for indoor applications where aesthetics are important.

Model #34-DMDUAL-KIT Specifications MODEL CONNECTOR 34‐DMDUAL‐KIT RPTNC GROUND PLANE SIZE Ground Plane 3.0” O.D. X 1.5” H Independent

FREQ RANGE 2400‐2485 MHz 5150‐5830 MHz PIG TAIL 18”

GAIN w/ out Ground Plate GAIN w/ Ground Plate 2.5 DBi 4 DBi 2.5 dBi 4 dBi TEMP RANGE ‐30°C to + 80°C

VSWR <2:1 <2:1 WEIGHT 1 lbs.

ELEVATION PATTERN (2.4 GHz) When mounted in the ceiling pointed down

ELEVATION PATTERN

(5.4 GHz) When mounted in ceiling pointed down)

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐PLANAR DUAL BAND WI‐FI ANTENNA

ANTENNA

This antenna provided pattern coverage for indoor applications operating in 2400‐2480 MHz, as well as 4940 to 5850 MHz. This economical puck style model provided industry leading wideband performance and omni‐direcional gain. It features an attractive, compact package that is ideal for indoor applications where aesthetics are important.

Model #34-PLANARE Specifications MODEL CONNECTOR 34‐PLANARE RPTNC GROUND PLANE SIZE Ground Plane 4.25” O.D. X 0.5” H Independent

FREQ RANGE 2400‐2480 MHz 4940‐5850 MHz PIG TAIL 12”

GAIN w/ out Ground Plate GAIN w/ Ground Plate 2.5 DBi 4 DBi 4 dBi 4 dBi TEMP RANGE ‐40°C to + 80°C

VSWR <1.35:1 <1.35:1 WEIGHT 0.5 lbs.

ELEVATION PATTERN (2.4 GHz) When mounted in the ceiling pointed down

ELEVATION PATTERN

(5.4 GHz) When mounted in ceiling pointed down)

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐BMANT24‐KIT OUTDOOR WIFI ANTENNA

ANTENNA

This antenna provided pattern coverage for indoor applications operating in 750‐2700 MHz. This economical shot glass style model provided industry leading wideband performance and omni‐direcional gain. Aesthetic indoor/outdoor antenna for ceiling or vehicle body mounting w/ UV resistant ABS plastic cover.

MODEL 34‐BMANT24‐KIT GROUND PLANE Ground Plane Independent

CONNECTOR RPTNC SIZE 1.75” O.D. X 3” H

Model #34-BMANT24-KIT Specifications

GAIN w/ out Ground Plate 2.5 DBi

FREQ RANGE 750‐2700 MHz PIG TAIL 12”

GAIN w/ Ground Plate 5 DBi TEMP RANGE ‐30°C to + 80°C

VSWR <2:1 WEIGHT 1 lbs.

ELEVATION PATTERN

AZIMUTH PATTERN

When mounted in the ceiling pointed down

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐BMANT5‐KIT OUTDOOR WIFI ANTENNA

ANTENNA

This antenna provided pattern coverage for indoor applications operating in 5150‐5830 MHz. This economical shot glass style model provided industry leading wideband performance and omni‐direcional gain. Aesthetic indoor/outdoor antenna for ceiling or vehicle body mounting w/ UV resistant ABS plastic cover.

Model #34-BMANT5-KIT Specifications MODEL 34‐BMANT5‐KIT GROUND PLANE Ground Plane Independent

CONNECTOR RPTNC SIZE 1.75” O.D. X 3” H

GAIN w/ out Ground Plate 2.5 DBi

FREQ RANGE 5150‐5830 MHz PIG TAIL 12”

GAIN w/ Ground Plate 5 DBi TEMP RANGE ‐30°C to + 80°C

VSWR <2:1 WEIGHT 1 lbs.

ELEVATION PATTERN

When mounted in the ceiling pointed down

AZIMUTH PATTERN

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐MINIANT‐2.4‐KIT MINIATURE WI‐FI ANTENNA

ANTENNA

This antenna provided pattern coverage for indoor applications operating in 2400‐2500 MHz. This miniature antenna model provided industry leading wideband performance and omni‐direcional gain. Aesthetic indoor antenna for ceiling mounting.

Model #34-MINIANT-2.4-KIT Specifications MODEL 34‐MINIANT‐2.4‐KIT GROUND PLANE Ground Plane Independent

CONNECTOR RPTNC‐MALE SIZE .9” O.D. X 1.3” H

GAIN w/ Ground Plate 2.0 DBi

FREQ RANGE 2400‐2500 MHz PIG TAIL 15”

COLOR White or Black

VSWR 2:1 WEIGHT .22 lbs.

ELEVATION PATTERN 2.5 GHz

AZIMUTH PATTERN

2.5 GHz

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐MINIANT‐5‐KIT MINIATURE WI‐FI ANTENNA

ANTENNA

This antenna provided pattern coverage for indoor applications operating in 4900‐5825 MHz. This miniature antenna model provided industry leading wideband performance and omni‐direcional gain. Aesthetic indoor antenna for ceiling mounting.

Model #34-MINIANT-5-KIT Specifications MODEL 34‐MINIANT‐5‐KIT GROUND PLANE Ground Plane Independent

CONNECTOR RPTNC‐MALE SIZE .9” O.D. X 1.3” H

GAIN w/ Ground Plate 2.0 DBi

FREQ RANGE 4900‐5825 MHz PIG TAIL 15”

COLOR White or Black

VSWR 2:1 WEIGHT .22 lbs.

ELEVATION PATTERN 5.15 GHz

AZIMUTH PATTERN

5.15 GHz

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐DBANT2450‐KIT DUAL BAND WI‐FI ANTENNA

ANTENNA

This antenna provided pattern coverage for indoor applications operating in 2400‐2500 MHz as well as the 4900‐5875 MHz range. This rubber ducky style antenna model provided industry leading wideband performance and omni‐ direcional gain. Aesthetic indoor antenna for ceiling mounting.

Model #34-DBANT2450-KIT Specifications MODEL CONNECTOR 34‐DBANT2450‐KIT RPSMA‐MALE GROUND PLANE SIZE Ground Plane Independent .37” O.D. X 4” H

FREQ RANGE 2400‐2500 MHz 4900‐5875 MHz POWER 5 Watts

GAIN 2.5 DBi 3.0 – 3.6 dBi TEMP RANGE ‐30°C to + 80°C

VSWR 2:1 Max All Bands WEIGHT 0.4 lbs.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐244958‐KIT DUAL BAND WI‐FI ANTENNA

ANTENNA

Model #34-DBANT244958-KIT Specifications MODEL CONNECTOR 34‐244958‐KIT RPSMA‐MALE GROUND PLANE SIZE Ground Plane Independent .37” O.D. X 4” H

This antenna provided pattern coverage for indoor applications operating in 2400‐ 2500 MHz as well as the 4900‐ 5825 MHz range. This rubber ducky style antenna model provided industry leading wideband performance and omni‐direcional gain. Aesthetic indoor antenna for ceiling mounting.

FREQ RANGE 2400‐2500 MHz 4900‐5825 MHz POWER 5 Watts

GAIN 2 DBi 3 dBi TEMP RANGE Indoor Office Environment

VSWR 2:1 Max All Bands WEIGHT .4 lbs.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐OMNI8‐24 OMNI WI‐FI ANTENNA

ANTENNA

This antenna provided pattern coverage for outdoor applications operating in 2400‐2500 MHz range. This outdoor antenna model provided industry leading wideband performance and omni‐direcional gain. Antenna requires additional mounting clamps.

Model #34-OMNI8-24 Specifications MODEL 34‐OMNI8‐24 GROUND PLANE Ground Plane Independent

CONNECTOR RPTNC SIZE 1” O.D. X 16” H

GAIN 8dBi

FREQ RANGE 2400‐2500 MHz PIGTAIL 12”

POWER 100 Watts TEMP RANGE 40°C to +85°C

VSWR <2:1 WEIGHT 1.5 lbs.

ELEVATION PATTERN Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐OMNI10‐NF OMNI WI‐FI ANTENNA

ANTENNA

Model #34-OMNI10-NF Specifications MODEL 34‐OMIN10‐NF GROUND PLANE Ground Plane Independent

CONNECTOR NF SIZE 1” O.D. X 40.25” H

FREQ RANGE 2400‐2500 MHz

POWER 50 Watts

PIGTAIL N/A

GAIN 10.5 DBi TEMP RANGE 40°C to +85°C

VSWR <1.5:1 WEIGHT 1.45 lbs.

ELEVATION PATTERN Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐OMNI5‐RPTNCM OMNI WI‐FI ANTENNA

ANTENNA

Model #34-OMNI5-RPTNCM Specifications MODEL 34‐OMNI5‐RPTNCM GROUND PLANE Ground Plane Independent

CONNECTOR RPTNC SIZE 1” O.D. X 12” H

FREQ RANGE 2400‐2500 MHz

GAIN 5 DBi

VSWR <1.5:1

PIGTAIL 12”

TEMP RANGE 40°C to +85°C

WEIGHT 1.5 lbs.

ELEVATION PATTERN

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐PATCH‐RPTNCM‐8 DIRECTIONAL WI‐FI ANTENNA

ANTENNA

This antenna provided pattern coverage for outdoor applications operating in 2400‐ 2500 MHz range. This indoor/outdoor antenna model provided industry leading wideband performance and omni‐direcional gain. Antenna requires additional mounting clamps.

Model #34-PATCH-RPTNCM-8 Specifications MODEL 34‐PATCH‐RPTNCM‐8 GROUND PLANE Ground Plane Independent

CONNECTOR RPTNC SIZE 4.5” X 4.5”

FREQ RANGE 2400‐2500 MHz

GAIN 8 DBi

VSWR <1.5:1

PIGTAIL 9”

TEMP RANGE 40°C to +85°C

WEIGHT 0.4 lbs.

ELEVATION PATTERN

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐CELLULAR‐PCS MULTI‐BAND ANTENNA

CELLULAR ANTENNA

This very aesthetic indoor cellular/PCS/Wi‐Fi antenna provides multi‐band, multi‐carrier coverage for in‐building wireless, distributed antenna systems (DAS), and Wi‐Fi. This high performance antenna works with most vendors DAS equipment, and is designed to provide excellent omni‐ directional coverage from the ceiling‐mounted position. The antenna can effectively provide multi‐carrier services. The antenna can be easily mounted into the door of Oberon’s Model 1052, 1072, and other ceiling mounted equipment enclosures. The antenna’s center stud mount fastens to standard antenna openings in the enclosure door. Oberon Model 1072‐00 telecom enclosure shown with 34‐CELLULAR‐PCS cellular antenna and six 34‐ ZDUAL antennas

Model #34-CELLULAR-PCS Specifications MODEL CONNECTOR FREQ RANGE 34‐CELLULAR‐PCS Type N Female 806‐960 MHz 1710‐2500 MHz GROUND PLANE SIZE PIG TAIL Ground Plane 6.5” O.D. 3.3” H 10” Low Loss RG58 Independent Plenum Rated

GAIN 3dBi 3dBi ANTENNA PATTERN Omni‐directional, Vertical Polarization

POWER 50 Watts TEMP RANGE Indoor Office Environment

WEIGHT 2 lbs.

VSWR <1.6:1 <1.6:1

MANUFACTURER: Andrew

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

34‐MULTI‐CARRIER MULTI‐BAND ANTENNA

CELLULAR ANTENNA

This very aesthetic indoor 700 MHz/cellular/PCS/Wi‐Fi antenna provides multi‐band, multi‐carrier coverage for in‐ building wireless, distributed antenna systems (DAS), and Wi‐Fi, including the new 700 MHz band and the Wi‐Fi 5 GHz band. This high performance antenna works with most vendors DAS and Wi‐Fi equipment, and is designed to provide excellent omni‐directional coverage from the ceiling mounted position. The antenna can effectively provide multi‐carrier services. The antenna can be easily mounted into the door of Oberon's Model 1072‐00 and other ceiling mounted equipment enclosures. The antenna's bulkhead Oberon Model 1072‐00 telecom enclosure shown connector fastens to standard antenna openings in the with 34‐MULTI‐CARRIER cellular antenna and six 34‐ enclosure door. ZDUAL antennas

Model #34-MULTI-CARRIER Specifications MODEL CONNECTOR FREQ RANGE 34‐MULTI‐CARRIER Type N Female 698‐850 MHz Bulkhead 850‐960 MHz 1710‐2170 MHz 2300‐3700 MHz 4900‐6000 MHz GROUND PLANE SIZE PIG TAIL Ground Plane 12” O.D. 3.2” H This antenna does Independent not have a cable, only a bulkhead connector

GAIN 1.5 dBi 2 dBi 4 dBi 5 dBi 6dBi ANTENNA PATTERN Omni‐directional, Vertical Polarization

POWER 50 Watts TEMP RANGE Indoor Office Environment

VSWR <2:1 WEIGHT 4 lbs.

MANUFACTURER: PCTel

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Cabling Accessories 35‐CBXJ2WH‐A Surface mounted modular receptacle to field terminate data cabling within an Oberon enclosure. Accepts Panduit Min‐Com® Modules for STP, UTP, fiber optic, and audio/video. Snaps in and out for easy moves, adds, and changes.     

Mounts easily with adhesive tape or optional magnet (CMB‐X) Cable entry from side and rear knockouts and opening in center of base Includes built‐in removable blank to add a second module Optional adhesive labels available Dimensions: 0.91”W X 1.77”H X 2.44”L

35‐CORD‐KIT Cord Grip Connector Option Kit For field termination Un‐terminated data cable is pused through the connector. The connector is then tightened on the data cable. Field terminate the cable inside of the enclosure.

 

Plastic Snap‐In Hole Connector 18” LMR195 RPTNC‐F Bulkhead to RPSMA‐M Pigtail

35‐RJ45‐KIT

RJ‐45 Bulkhead Pass‐through Option Kit For weather/dust proof terminations of data cable  

RJ‐45 Bulkhead pass‐through RJ‐45 Cordsets available; must specify length and termination (see Jumper Option Kit)

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Cabling Accessories 35‐BULKHD‐KIT‐RPSMA(F)

Snap‐In Bulkhead Connector Kit This RPSMA bulkhead connector snaps into the door of Oberon’s ceiling enclosures, permitting any dipole (“rubber duck”) antennas to be mounted on the door. Includes a plastice snap‐in hole cover with RP‐SMA(F) bulkhead connector, 18” LMR195 to RP‐SMA(M) connector pigtail and washers.   

Plastic Snap‐In Hole Connector 18” LMR195 RPSMA‐F Bulkhead to RPSMA‐M Pigtail Washers

35‐BULKHD‐KIT‐RPTNC(F)

Snap‐In Bulkhead Connector Kit This RPTNC bulkhead connector snaps into the door of Oberon’s ceiling enclosures, permitting any dipole (“rubber duck”) antennas to be mounted on the door. Includes a plastice snap‐in hole cover with RP‐TNC(F) bulkhead connector, 18” LMR195 to RP‐TNC(M) connector pigtail and washers.   

Plastic Snap‐In Hole Connector 18” LMR195 RPTNC‐F Bulkhead to RPTNC‐M Pigtail Washers

35‐195NMRPTNCM‐12 –OR‐ 35‐100NMORI‐19

Jumper Option Kit Mates the access point to the antenna   

12” LMR195 Type N‐(M) to Cisco Pigtail P/N 35‐195NMRPTNCM‐12 19” LMR100 Type N‐(M) to Orinoco Pigtail P/N 35‐100NMORI‐19 LMR400 and LMR600 cable types available

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Cabling Accessories 35‐GOREVENT‐KIT

Gore Vent Option Kit Allows “breating” for outdoor enclosures Outdoor environments for access point and enclosures can fluctuate drastically between night and day causing condensation to form on the inside of the enclosure. The 35‐GOREVENT‐KIT enables the enclosure to “breathe,” allowing water vapor to exit the enclosure while preventing additional water vapor from entering inside the enclosure.  35‐GOREVENT‐KIT

38‐LA‐NF ‐OR‐ LA‐RPTNCM

Lightning Arrestor Option Kit Ring terminal included  

0‐6 GHz Lightning Arrestor (N‐Female) P/N 38‐LA‐NF 0‐6 GHz Lightning Arrestor (Reverse Polarity TNC‐Male) P/N 38‐LA‐RPTNCM

ADP‐NFBLKHD

Bulkhead Adaptor Option Kit Type N Adaptor This TYPE‐N (F) to TYPE‐N (F) Bulkhead adaptor can be inserted into knockouts and openings in Oberon’s ceiling‐ and wall‐mounted enclosures to conveniently connect TYPE‐N “jumpers” to the access point inside the enclosure and attach dipole antennas to the exterior.  ADP‐NFBLKHD

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Enclosure Accessories 38‐1052‐MNT‐KIT

Universal Mouniting Plate Option Kit Wireless access point mounting accessory Optional Universal Mounting Plate for use with the Model 1052‐00 suspended ceiling enclosure. The universal mounting plate has mounting features for most leading wireless access points.  38‐1052‐MNT‐KIT

38‐MAGNETCOVER ‐ Magnetic Paper

Magnetic Cover Option Kit Wireless access point enclosure accessory 4” X 10” White magnetic paper conceals mounting features for unused antennas on Oberon’s Models 1053‐00 and 1054‐00.  38‐MAGNETCOVER

Ceiling Mounting Accessories 38‐CEILING‐TBAR

Ceiling Grid T‐Bar Enclosure support Some ceiling systems use 2’ X 4’ ceiling tiles. With these larger ceiling tiles, use the 38‐CEILING‐TBAR to provide a clean installation of Oberon’s 2’ X 2’ ceiling enclosures. This T‐bar is a standard 15/16”wide.  38‐CEILING‐TBAR

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Ceiling Mount Accessories 36‐SLD15L2TP

Oberon 36‐SLD15L2TP Caddy Speed Link kit for suspending static loads in a suspended ceiling. CADDY® SPEED LINK LD is a universal support system that quickly suspends static loads, even at an angle. It is a cost‐effective alternate to jack chain, threaded rod and associated hardware in wireless enclosures, lighting, ductwork and other installation projects. The 1.5 mm (0.059 inch) wire rope with a crimped‐on hook holds working loads of up to 20 kg (44 lb) with a 5:1 safety factor. Wire rope is 2 m (6.6 ft) long. TWO PER PACKAGE.

36‐SLD15Y500

The CADDY® Y‐toggle is a universal support system that quickly suspends static loads, even at an angle. It is a cost‐effective alternate to using jack chain, threaded rod and associated hardware to mount wireless access point enclosures, telecommunications enclosures, wire trays, etc. The toggles at the ends of the "Y" insert into mounting features in the back box of the ceiling enclosure, allowing quick mounting and leveling of enclosures. The Y‐Toggle meets the fire rating requirements of DIN 4102‐2 for 30 minutes (for galvanized wire rope) and for 90 minutes (for stainless steel wire rope) at 30 percent of rated load, and works with a variety of CADDY® fasteners. The Y‐toggle working load 44 lbs (20kg), and the Y‐ length is 19.6 in. (adjustable after installation).

36‐SFCLT

The CADDY® 36‐SFCLT Seismic Fixture Clamps attach fixtures securely to the ceiling frame member. This set of reinforcing clamps is designed to prevent the T‐bar from twisting and disconnecting at the T‐Bar intersections in a seismic event. The reusable clamps also helps prevent the fixture from separating from the T‐bar framework. They will withstand the force of a standard fire hose. The CADDY® SFCLT family of fixture clamps consists of connectors for 2' x 4' and 2' x 2' light fixtures, as well as for end‐to‐end and side‐by‐side connections of light fixtures and for reinforcement of T‐Bar main runner joints. In addition, they can be used to secure 2' x 2' air diffusers. Each reusable clamp is secured to the fixture and the T‐Bar with two screws. Use of the clamps eliminates the need for two slack wires. The rated load of the CADDY® SFCLT is 10 times the weight of a standard 30‐lb light fixture. The clamp is designed to work together with T‐Bar runners to provide seismic restraint for the fixture without additional chains or cables attached to the fixture itself.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

Appendix A – Warranty

Terms and Conditions

Sale of Equipment – Seller agrees to sell the equipment specified on any quotation, sales order, invoice, or packing slip to Buyer upon the terms and conditions stated below. Shipment – Unless special arrangements are made, ownership of the goods and risk of damage/loss passes to Buyer when the freight carrier picks them up from Seller, and Buyer is responsible for filing any freight claims for damage or loss. If an item is received with freight damage, it is very important for the Buyer to note "Damaged Freight” on the carrier's bill before signing it.

Freight and Other Charges – Freight charges are prepaid by Seller and added to Buyer's invoice plus a service/handling charge. Sales tax will be charged as required by law. Credit and Payment Terms – Standard credit terms are Net 30. Oberon accepts company checks, certified checks, Visa or MasterCard. Payments on past due invoices will be subject to a "Late Charge" in the amount of 1½% per month. Returns and Exchanges – Returned hardware may be subject to a restocking fee of 20% for enclosure products and 10% for all other products. No returns will be accepted for customized orders, special cable order, etc. Returned units must be in original package, undamaged. No returns after 90 days. Customer shall insure return shipment for value of the product. Customer shall be responsible for legal and other fees associated with collection of payments for past due amounts.

Limited Warranty

Equipment manufactured by Seller – Seller warrants to Buyer that the equipment will be free of defects in materials and workmanship for a period of one (1) year from the date of shipment. This warranty shall not apply to any equipment, which is misused, or for any damage to the equipment resulting from improper installation or operation, vandalism, acts of God, or any other cause beyond reasonable control of the seller. This warranty shall be void if the equipment has been altered, tampered with, or repaired by a party other than the Seller or its authorized representative. In the event of equipment failure within the warranty period, Seller will repair or replace the defective equipment, at its option, provided that Buyer notifies Seller and obtains a RMA number prior to returning the equipment to Seller. Defective equipment must be returned, shipping prepaid, to the Seller's specified address. The warranty on repaired or replaced equipment will be the balance of the original Equipment Warranty. This Warranty Is In Lieu Of All Other Warranties, Express or Implied, Including, Without Limitation, Statutory Warranties or Warranty of Merchantability or Fitness for a Particular Purpose. Seller's sole liability and buyer's sole remedy hereunder will be repair of replacement of the Equipment as provided in this agreement. Other Equipment – Seller will pass through to Buyer all original Manufacturers' Warranties that may apply to the equipment. Seller may, at its option, process warranty requests by the Buyer to the Original Manufacturer, or refer the Buyer to the Original Manufacturer. Seller is not responsible for any warranty‐related issues.

Applications – By placing an order with Oberon, Buyer agrees to these terms and conditions regarding this order and any subsequent orders, and no modifications or other terms are binding on Buyer without prior written approval. Pennsylvania Law Applies.

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com

‐ Wireless LAN Access Point Enclosures and Mounting Solutions ‐ Telecommunications Enclosures ‐ Antennas ‐ Cables ‐ Accessories

CAD, BIM, & CSI Specs

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867‐2312 ● Fax (814) 867‐2314 ● www.oberonwireless.com