94
TP&N Power Distribution... Clipsal’s Boxed Solutions.
4 -16 TP MCB outgoing ways Standard 200 Amp. Busbar Removable Door CR steel 1.00/1.25mm thick conforming to BS EN 10130-1991. Pre-treated and fully immersed in iron phosphate prior to electrostatic powder coating. The use of exceptional materials and processes is typical of the Clipsal range of TP&N
distribution boards. Removable gland plates top and bottom allow ease of installation and when combined with a wide variety of incoming devices and accessories, the Clipsal range forms a flexible, high quality distribution system.
Removable door - ease of installation Keyhole slots - fast wall mounting Removable gland plates top & bottom - multi board linkage www.clipsal.co.uk
Wide variety of incoming devices & accessories flexible high quality distribution system
AQUASEAL IP56 & IP66 ACCESSORIES
Aquaseal provides the ideal solution to electrical distribution/connection when installation is required outdoors with IP56/66 protection maintained while in use. In any environment that is open to the elements, aquaseal will ensure the safety and protection of both user and the installation.
Socket Outlets IP56 250V 13A 1 Gang Surface Mount Switched Socket IP56 250V 13A 1 Gang Surface Mount Double Pole Switched Socket IP56 250V 13A 1 Gang Surface Mount Unswitched Socket
WEATHER PROOF ACCESSORIES
95
Order Ref CSC313 CSC313D CSO313
IP66 1 gang 20A 16AX 2 way surface mount switch with loop-in terminal
CSW120
IP66 2 gang 20A 16AX 2 way surface mount switch with loop-in terminal
CSW120/2
IP66 1 gang 20A double pole surface mount switch IP66 1 gang 20A double pole surface mount switch with Neon
CSW220 CSW220N
Isolators IP66 40A 250V~ Surface Mount Single Pole Switch Isolator
CSS140
IP66 40A 250V~ Surface Mount Two Pole Switch Isolator
CSS240
IP66 40A 250V~ Surface Mount Triple Pole Switch Isolator
CSS340
www.clipsal.co.uk
Switches
www.clipsal.co.uk
WEATHER PROOF ACCESSORIES
96
AQUASEAL IP56 & IP66
S P E C I F I C AT I O N
TECHNICAL SPECIFICATIONS
CSC
CSO
CSW
CSS
VOLTAGE
250V
250V
250V
Single Pole – 250V Double & Triple Pole 500V
40AMP
AMPERAGE
13AMP
13AMP
Single Pole – 20AMP/16AX Double Pole – 20AMP
DIMENSIONS
80mm x 160mm x 85mm
80mm x 103mm x 85mm
80mm x 103mm x 85mm
80mm x 160mm x 85mm
IEC60947.3 & BSEN60529 AS/NZ3000, AS/NZ3100, AS/NZ3133
COMPLIANCE
BS1363-2
BS1363-2
BSEN60669-1 IEC60669-1 IS3854 SABS163 SABSIEC669-1 IEC60529
INTERNATIONAL PROTECTION RATING
IP56 for Plugs with Cables Ø5 – 14mm
IP56 for Plugs with Cables Ø5 – 14mm
IP66
IP66
MOTOR RATING
N/A
N/A
N/A
Single Pole – M120 Double & Triple Pole – M100
TERMINAL BORES
5mm
5mm
4.1mm
7.45mm
TERMINAL ACCOMMODATION
4 x 2.5mm2
4 x 2.5mm2
3 x 2.5mm2
1 x 10mm2 Cable Max
ENTRIES
Threaded Conduit Entries – 4 x M25 at 33mm Centres Plain Cut Out – 1 x 25 (25-20mm Reducer Included)
Threaded Conduit Entries – 4 x M25 at 33mm Centres Plain Cut Out – 1 x 25 (25-20mm Reducer Included)
Threaded Conduit Entries – 4 x M25 at 33mm Centres Plain Cut Out – 1 x 25 (25-20mm Reducer Included)
Threaded Conduit Entries – Top & Bottom 4 x M25 at 33mm Centres Plain Cut Out – Rear of Base 2 x 25 (25-20mm Reducer Included)
IP55 ACCESSORIES
This series of wall-mounting enclosures are equipped with a flap door and soft membrane. Thanks to the connections, several enclosures can be mounted side by side, horizontally and vertically. All metal components (screws, springs, etc.) are made of stainless steel. The Protection degree is IP55 for switches and for sockets when the cover is closed and the related plugs are not engaged, while it is IP40 for sockets when the plugs are engaged.
Description IP55 230V 13A 1 Gang Unswitched Socket
Order Ref E551US
IP55 230V 13A 1 Gang Switched Socket
E551SS
IP55 230V 13A 2 Gang Unswitched Socket
E552US
IP55 20AX 1 Gang 2 Way Switch
E551/2S
IP55 20AX 2 Gang 2 Way Switch
E552/2S
IP55 20AX Push Button
E55PB
Connection Box
E55CB
Grommet (Pack of 10)
E55GP
Box Coupler
E55BC
WEATHER PROOF ACCESSORIES
97
Technical data • Self-extinguishing material according to the standards IEC 695-2. • Colour: RAL 7035 Grey
• Covers without structures or projections to be fixed on walls or panels. • Connection with a double function: truncking / tube pressing for smooth and threaded tubes 20mm. • Fittings between the cover and box to ensure maximum tightness. • Flap door with soft membrane; snap-fittings on the cover to prevent unwanted opening with water jets. • Transparent soft membrane for identification of device functions and with projecting diagonal grooves for easier handling of rockers • Anti-jet collar along the cover perimeter, preventing even the slightest water entrance. • Standard compliance: EN 60669-1
www.clipsal.co.uk
• Inlets for connection cables/tubes on 3 sides of the box; the 4th is free of holes.
www.clipsal.co.uk
98
www.clipsal.co.uk
99
www.clipsal.co.uk
100