CTAP-03
Introduction B-Line Systems was formed in 1956 and has over 30 years experience manufacturing cable tray systems in which it has grown to become the industry leader. This growth was achieved by offering unmatched quality in both service and products. Today, Cooper B-Line stands alone in its customer service resources with cable tray fabrication location at four locations throughout the United States. Strategically located facilities alone do not generate unmatched service.
The professional staff at Cooper B-Line is knowledgeable, energetic and care about customer needs. The right attitude coupled with the facilities generates unsurpassed customer service. Cooper B-Line’s product offerings also set new standards. Cooper B-Line manufactures cable support product lines that bridge both the electrical and telecom markets. Each of those product lines are engineered to provide top performance while offering unique installation savings. This catalog is dedicated to the metallic, non-metallic, two side rail, Cent-R-Rail® and wire basket cable tray systems.
Main Contents Cable Tray Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 Aluminum Cable Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16 Aluminum Cent-R-Rail® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24 Aluminum Redi-Rail™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 70 Aluminum Cable Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 83 Steel Cable Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 106 Steel Wire Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 114 Steel Cable Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 136 Fiberglass Cable Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 172 Fiberglass Cable Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 174 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 188 Pages are color coded for easy reference: Red = Aluminum Green = Steel Blue = Fiberglass Important notice: The information herein has been carefully checked for accuracy and is believed to be correct and current. No warranty, either expressed or implied, is made as to either its applicability to or its compatibility with specific requirements of this information, nor for damages consequential to its use. All design characteristics, specifications, tolerances and similar information are subject to change without notice.
MEMBER
www.cooperbline.com
®
Cooper B-Line cable trays conform to the requirements of IEC Standard 61537, 2001 Ed.
B-Line Cable Tray
ONE ONE Source! Source!
Cable tray is a mechanical support system that can support cables and raceways. Cable tray is not a raceway. Cable tray systems are required to be electrically continuous but not mechanically continuous.
Advantages of B-Line Cable Tray Systems
• • • • • • • •
Safety Dependability Space Savings Cost Savings Design Cost Savings Material Savings Installation Cost & Time Savings Maintenance Savings For additional information refer to the 2002 Cable Tray Manual, a B-Line publication or call B-Line engineering, 1-800-851-7415 ext. 366
1
800-851-7415 ext. 366
B-Line Cable Tray Ask the Experts
800-851-7415 ext. 366
B-Line Cable Tray 1. Support Span Issues are: STRENGTH and LENGTH • Very important to first consider the support span as it affects the strength of the system and the length of the straight sections required. • Short, 6 to 8 ft support spacing - use 10 or 12 ft sections. • Intermediate, 8 to 12 ft support spacing - use 12 ft sections. • Long span, 16 to 20 ft - use 20 ft sections. • Extra long span, over 20 ft to 30 ft - use 24 or 30 ft sections.
2. Working Load Issue is: SIZE (Width, Loading Depth and STRENGTH) Cable Load • Types and number of cables to support Total Cable Load in Lbs per linear foot (lbs/ft). • Power - is single layer - issue Width (refer to local electrical code) • Low voltage - is stacked - issue Loading Depth and Width (Refer to affecting code) • See chart of listed cable load guidelines (Refer to pages 10 and 11)
www.cooperbline.com
2
Selection Process Additional Loads 200 lb concentrated load - Industrial installations Ice, Wind, Snow loads - Outdoor installations Select a Cable Tray system that meets the working load for the support span required and a straight section length that fits the installation. NEMA VE 2- Straight sections equal to or larger than span.
3. Installation Environment Issues are: MATERIAL and FINISH • Indoor Dry Institutional, Office, Commercial, Light Industrial – Aluminum, Pre-Galvanized Steel, YZN Wire Mesh Steel
• Indoor Industrial Automotive, Pulp and Paper, Power Plants – Aluminum, Pre-Galvanized Steel, YZN Wire Mesh Steel, Possibly Hot Dipped Galvanized After Fabrication (HDGAF)
• Outdoor Industrial Petrochemical, Automotive, Power Plants – Aluminum, HDGAF
• Outdoor Marine Off Shore Platforms – Aluminum, Stainless Steel, Fiberglass
• Special Petrochemical, Pulp and Paper, Environmental Air – Contact B-Line Engineering (1-800-851-7415 ext. 366)
3
800-851-7415 ext. 366
Ask the Experts! Cable T ray
B-Line Cable Tray, ONE SOURCE Cooper B-Line’s Cable Tray Product Offering
W ide Selection Redi-Rail ™
• Two Side Rail Systems Aluminum, Pre-Galvanized Steel, Hot Dip Galvanized After Fabrication Steel, 304 and 316L Stainless Steel, Fiberglass in Polyester Resin, Vinyl Ester and Zero Halogen. Redi-Rail Systems loaded with special installation and cable friendly features. Systems tested to 173 lbs/ft on a 30 ft span.
Rapid Results
Special bottom options and splices. Highest quality fittings.
Cable Channel
Unmatched accessories supplied with attachment hardware.
• Cable Channel 3, 4 and 6 inch widths in Aluminum, Pre-Galvanized Steel, Hot Dip Galvanized After Fabrication Steel and 304 and 316L Stainless Steel. 3, 4, 6 and 8 inch widths in Fiberglass in Polyester Resin, Vinyl Ester, and Zero Halogen.
Economical Cent-R-Rail ®
Unmatched fitting and accessory offering.
• Cent-R-Rail® Systems Data-Track®, Verti-Rack®, Half-Rack® and Multi-Tier Half-Rack®. Each system targeted to installation needs. Each system is the fastest in the industry to install.
Targeted Installations
Pre-assembled, boxed connectors, splices. Crated straight section shipments.
W ire Basket
• Wire Basket Cable Support Best finish in the industry, ASTM B633, YZN, SC2. Strong straight top wire design.
Go Anywhere
www.cooperbline.com
Unmatched accessory package.
4
Advantage of Using B-Line®®Cable Tray?
Ask the Experts!
Selection! Selection! Two Side Rail - Cent-R-Rail® - Wire Basket What kind of B-Line® Cable Tray Options will work for my project? First, answer three questions.
1. Location: Where will the project be located? A. Is the installation inside or outside? (decision dealing with thermal and weather conditions) B. Any contact of corrosive materials? (decision on cable tray material or finish) C. Is the location for the cable tray confined or open? (decision on the size and type of cable tray ie. Wire Basket versus Half-Rack®)
2. Span:
What would be the longest AND shortest spans between supporting locations for the installation of cables? (decision on type OR combination of types of cable tray design needed to be the most efficient and economical)
3. Cables:
How many AND what type of cables are involved in the support installation? (decision on the strength of the cable tray)
All these variables are important to the COST SAVINGS and SAFETY of your B-Line® Cable Tray Installation Project.
It is Your Money,
Your Decision. 5
800-851-7415 ext. 366
Cable Tray Selection Chart B-Line Cable Tray Maximum Loads (Lbs/ft) 0-99 100-199 200-299 300-399 400-500
Ex. Long Span
Long Span
Intermediate Span
8’
10’
12’
Cable Tray Alum Cable Tray Steel Data-Track Fiberglass Tray Half Rack Multi-Tier Redi-Rail Verti-Rack Wire Basket Cable Tray Alum Cable Tray Steel Data-Track Fiberglass Tray Half Rack Multi-Tier Redi-Rail Verti-Rack Cable Tray Alum Cable Tray Steel Data-Track Fiberglass Tray Redi-Rail Verti-Rack
16’
Cable Tray Alum Cable Tray Steel Fiberglass Tray
18’
Cable Tray Alum Cable Tray Steel Fiberglass Tray
20’
Cable Tray Alum Cable Tray Steel Fiberglass Tray
24’ 30’
Cable Tray Alum Cable Tray Steel
41 308 448 50 100 224 300 83 284 248 252 353 50 100 224 225 42 204 158 161 226
OPEN PAGE
Short Span
6’
Cable Channel Cable Tray Steel Data-Track Half Rack Multi-Tier Redi-Rail Verti-Rack Wire Basket
50 100 164 144 233 192 112 424 114 100 233 203 239 206 160 188 167 130 153 116 90 173
Cable Tray Alum
Cooper B-Line cable trays conform to the requirements of IEC Standard 61537, 2001 Ed.
Open page to expand cable tray selection charts. www.cooperbline.com
6
Short Span 6-8
Short Span
Recommended Short Span Cable Tray Selection Use 10ft or 12ft Sections
Half- DataRack Track VeriRack Multi-Tier Half-Rack RediRail
Cable Tray
Cable Tray
Cent-R-Rail
Wire Basket
Cable Channel
Catalog Number CC-03 CC-04 CC-06 FCC-03 FCC-04 FCC-06 FCC-08 WB202 WB204 WB206 WB208 WB212 WB218 WB224 WB408 WB412 WB418 WB424 C3ADB C4ADB C6ADB C3A1H C4A1H C6A1H C2A2V C2A3V C2A4V C2A5V C2A6V C3A2M C3A3M C3A4M C4A2M C4A3M C4A4M H14AR H15AR H16AR H17AR 24A 148 156 166 13F 24F
Rail Height 1.25” 1.75” 1.75” 1.00” 1.125” 1.625” 2.188” 2.37” 2.37” 2.37” 2.37” 2.37” 2.37” 2.37” 4.19” 4.19” 4.19” 4.19” 3.7” 4.7” 6.7” 3.7” 4.7” 6.7” 9.3” 13.3” 17.3” 21.3” 25.3” 11.3” 17.3” 23.3” 11.3” 17.3” 23.3” 4.0” 5.0” 6.0” 7.0” 4.12” 3.625” 4.188” 5.188” 3.0” 4.0”
Load Depth 1.25” 1.75” 1.75” 1.00” 1.125” 1.625” 2.188” 2” 2” 2” 2” 2” 2” 2” 4” 4” 4” 4” 3.0” 4.0” 6.0” 3.0” 4.0” 6.0” 4.0” 6.0” 8.0” 10.0” 12.0” 6.0” 9.0” 12.0” 8.0” 12.0” 16.0” 3.0” 4.0” 5.0” 6.0” 3.05” 3.077” 3.628” 4.628” 2.0” 3.0”
Span Load lbs/ft Available 6’ 8’ Width Material* 15 33 36 8 12 58 87 38 38 38 49 62 64 66 66 90 80 83 100 100 100 50 50 50 100 100 100 100 100 50 50 50 50 50 50 224 224 224 224 487 204 304 308 257 627
9 20 22 8 12 58 87 23 23 23 25 37 40 42 36 42 42 42 100 100 100 50 50 50 100 100 100 100 100 50 50 50 50 50 50 194 224 224 224 284 115 171 173 145 353
3” 4” 6” 3” 4” 6” 8” 2” 4” 6” 8” 12” 18” 24” 8” 12” 18” 24” 6”-24” 6”-24” 6”-24” 6”-12” 6”-12” 6”-12” 3”-12” 3”-12” 3”-12” 3”-12” 3”-12” 3”-12” 3”-12” 3”-12” 3”-12” 3”-12” 3”-12” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36”
A,S A,S A,S F F F F S S S S S S S S S S S A A A A A A A A A A A A A A A A A A A A A A S S S F F
Details Page A17,S107 A17,S107 A17,S107 172 172 172 172 116 116 116 116 116 116 116 116 116 116 116 26 26 26 30 30 30 28 28 28 28 28 32 32 32 32 32 32 71 71 71 71 85 137 138 139 174 176
Accessories Page A20, S110 A20, S110 A20, S110 173 173 173 173 118 118 118 118 118 118 118 118 118 118 118 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 73 73 73 73 94 142 142 142 183 183
*Material A = Aluminum S = Steel F = Fiberglass www.cooperbline.com
7
Intermediate Span 10-12
Intermediate Span
Recommended Intermediate Span Cable Tray Selection Use 12ft Sections
DataVeri-Rack Track Aluminum Steel
Fiberglass
Cable Tray
RediRail
Cent-R-Rail
Catalog Number C3ADB C4ADB C6ADB C2A2V C2A3V C2A4V C2A5V C2A6V H14AR H15AR H16AR H17AR 24A 34A 25A 35A 26A 36A 37A 148 248 346 156 258 356 166 268 366 176 378 13F 24F 36F
Rail Height 3.7” 4.7” 6.7” 9.3” 13.3” 17.3” 21.3” 25.3” 4.0” 5.0” 6.0” 7.0” 4.0” 4.0” 5.0” 5.0” 6.0” 6.0” 7.0” 3.625” 4.0” 4.0” 4.188” 5.0” 5.0” 5.188” 6.0” 6.0” 6.188” 7.0” 3.0” 4.0” 6.0”
Load Depth 3.0” 4.0” 6.0” 4.0” 6.0” 8.0” 10.0” 12.0” 3.0” 4.0” 5.0” 6.0” 3.0” 3.0” 4.0” 4.0” 5.0” 5.0” 6.0” 3.077” 3.0” 3.0” 3.628” 4.0” 4.0” 4.628” 5.0” 5.0” 5.628” 6.0” 2.0” 3.0” 5.0”
Span Load lbs/ft Available Details Accessories 10’ 12’ Width Material* Page Page 161 161 161 144 144 144 144 144 124 147 164 144 181 320 200 310 204 336 320 73 148 252 109 157 276 308 248 300 124 204 93 226 365
112 112 112 100 100 100 100 100 86 102 114 100 126 222 139 215 142 233 222 51 103 175 76 109 192 173 158 208 86 142 64 157 246
*Material A = Aluminum S = Steel F = Fiberglass
8
6”-24” 6”-24” 6”-24” 3”-12” 3”-12” 3”-12” 3”-12” 3”-12” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36”
A A A A A A A A A A A A A A A A A A A S S S S S S S S S S S F F F
26 26 26 28 28 28 28 28 71 71 71 71 85 85 87 87 89 89 91 137 151 151 138 153 153 139 155 155 140 157 174 176 178
34 34 34 34 34 34 34 34 73 73 73 73 94 94 94 94 94 94 94 142 159 159 142 159 159 142 159 159 142 159 183 183 183
Long Span 16-20
Long Span
Recommended Long Span Cable Tray Selection Use 20ft Sections
Steel Fiberglass
Cable Tray
Aluminum
Catalog Number 34A 35A 36A 46A H46A 37A 47A H47A 346 444 356 454 366 464 378 476 574 36F 46F H46F 48F
Rail Height
Load Depth
4.0” 5.0” 6.0” 6.0” 6.0” 7.0” 7.0” 7.0” 4.0” 4.0” 5.0” 5.0” 6.0” 6.0” 7.0” 7.0” 7.0” 6.0” 6.0” 6.0” 8.0”
3.0” 4.0” 5.0” 5.0” 5.0” 6.0” 6.0” 6.0” 3.0” 3.0” 4.0” 4.0” 5.0” 5.0” 6.0” 6.0” 6.0” 5.0” 5.0” 5.0” 7.0”
Span Load lbs/ft 16’ 18’ 20’ 125 121 131 161 125 156 233 98 142 108 166 92 192 80 120 203 139 221 239 196
99 96 104 127 206 99 123 184 78 112 85 131 73 152 63 95 160 109 221 239 155
80 77 84 103 167 80 100 149 63 91 69 106 59 123 51 77 130 89 141 153 125
Available Details Accessories Width Material* Page Page 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36” 6”-36”
A A A A A A A A S S S S S S S S S F F F F
85 87 89 89 89 91 91 91 151 151 153 153 155 155 157 157 157 178 178 178 180
Extra Long Span 24-30
94 94 94 94 94 94 94 94 159 159 159 159 159 159 159 159 159 183 183 183 183
Ex. Long Span
Recommended Extra Long Span Cable Tray Selection Use 24ft or 30ft Sections
Aluminum
Cable Tray
Catalog Rail Number Height H46A H47A 57A S8A
6.0” 7.0” 7.0” 8.0”
Load Depth 5.0” 6.0” 6.0” 6.2”
Span Load lbs/ft 24’ 30’ 116 103 161 270
75 173
Available Details Accessories Width Material* Page Page 6”-36” 6”-36” 12”-36” 12”-36”
A A A A
89 91 92 92
94 94 94 94
*Material A = Aluminum S = Steel F = Fiberglass
9
800-851-7415 ext. 366
Cable Tray Selection Width & Available Loading Depth 392.12 W Sd (single layer)
Start Here No
2000V or less cables
Sizing Cable Tray Per 2002 NEC 392 Yes
Solid Bottom Tray
No
Vented Channel Tray
Yes
Ladder or Vented Trough Tray
No
Yes
392.10 Not recognized ® by the NEC
392.10(B) W Sd
Yes
392.10(A)(1) W Sd
Yes
S/C 1000 kcmil or larger
Yes
S/C 1/0 or larger
No
Multiconductor cables
No
392.3(B)(1) Not recognized ® by the NEC
No
392.10(A)(2) W A/1.1
Note: The value “A” only applies to cables 250 up to 1000 kcmil. The value “Sd” only applies to 1000 kcmil and larger cables.
Legend W = Cable Tray Width D = Cable Tray Load Depth Sd = Sum of Cable Diameters A = Sum of Cable Areas S/C = Single Conductor M/C = Multiconductor Cables RS = Ladder Rung Spacing
www.cooperbline.com
Yes
S/C 250 kcmil up to 1000 kcmil
No
392.10(A)(3)
Yes
W A/1.1 +Sd
S/C 250 kcmil and larger
No
392.10(A)(4)
Yes
W Sd (9” max. RS)
10
S/C 1/0 thru 4/0
Note: Use when mixing 250 thru 1000 kcmil cables with cables larger than 1000 kcmil.
Yes
Legend W = Cable Tray Width D = Cable Tray Load Depth Sd = Sum of Cable Diameters A = Sum of Cable Areas S/C = Single Conductor M/C = Multiconductor Cables RS = Ladder Rung Spacing
Yes
Ladder or Vented Trough Tray
No
Yes
M/C 4/0 or larger
Vented Channel Tray
Yes
Yes
392.9(A)(1) W Sd (single layer)
M/C 4/0 or larger
No
M/C smaller than 4/0
No
Solid Bottom Tray
392.9(A)(2) W A/1.2
M/C smaller than 4/0
No
Solid Channel Tray
Yes
Yes
392.9(C)(1) W Sd/0.9 (single layer)
No
Yes
No
One M/C only
Yes
392.9(E)(1) W x D 1.6A
No
Yes
392.9(C)(2) W A/0.9
392.9(E)(2) W x D 2.9A
No
One M/C only
No Yes
M/C Yes smaller than 4/0, with 4/0 or larger
No
M/C control and/or signal
392.9(A)(3) W A/1.2 + Sd
M/C Yes smaller than 4/0, with 4/0 or larger
Note: The value “A” only applies to cables smaller than 4/0. The value “Sd” only applies to 4/0 and larger cables, which must be single layer
Yes
392.9(B) W x D 2A
No
M/C control and/or signal
392.9(C)(3) W
A + Sd 0.9
392.9(F)(2) W x D 3.2A
392.9(F)(1) W x D 1.9A
Note: The value “A” only applies to cables smaller than 4/0. The value “Sd” only applies to 4/0 and larger cables, which must be single layer
Yes
392.9(D) W x D 2.5A
11
800-851-7415 ext. 366
Cable Tray Selection Loading Possibilities Power Application: Power application can create the heaviest loading. The heaviest cable combination found was for large diameter cables (i.e. steel armor, 600V, 4 conductor 750 kcmil). The cables weigh less than 3.8 lbs. per inch-width of cable tray. As power cables are installed in a single layer, the width of the cable affects the possible loading. 36" Wide 140 lbs/ft
30" Wide 115 lbs/ft
24" Wide 90 lbs/ft
18" Wide 70 lbs/ft
12" Wide 45 lbs/ft
9" Wide 35 lbs/ft
6" Wide 23 lbs/ft
Data/Communication Cabling: Low voltage cables can be stacked as there is no heat generation problems. The NEC employs a calculation of the total cross sectional area of the cables not exceeding 50% of the fill area of the cable tray. As the cable fill area of the cable tray system affects the possible loading, both the loading depth and width of the systems must be considered. For this example 4UTP category 5 cable (O.D. = .21, .026 lbs./ft.) were used.
Calculated Cable Weight in Lbs/Ft 36" Wide
30" Wide
24" Wide 18" Wide 12" Wide
9" Wide
6" Wide
6" Fill
81
64
52
41
27
20
14
5" Fill
68
53
43
34
23
17
12
4" Fill
54
43
35
27
18
13
9
3" Fill
41
32
26
21
14
10
7
2" Fill
27
21
17
14
9
7
5
The picture shows a 12" cable tray with a 3" load depth. The tray contains 520 4 UTP Category 5 cables with a .21" diameter. The National Electrical Code allows for 50% fill of ventilated and ladder cable tray for control or signal wiring (Article 392.9(B)). ANSI/EIA/TIA 569-A Section 4.5* also requires that the fill ratio of cable tray is not to exceed 50%. Calculation Example: Tray Area = 12 in. x 3 in. = 36 sq. in. 50% Fill = 36 sq. in. x .5 = 18 sq. in. Cable Area = (.21 in.)2 x 3.14/4 = .0346 sq. in. Number of Cables = 18 sq. in. / .0346 sq. in. = 520 cables *Section 4.5 is currently under review.
www.cooperbline.com
12
B-Line Product Search
Ask the Experts!
Searching for B-Line Cable Tray Material? Need a Cable Tray Materials Price Quote?
http://www.cooperbline.com/product/CableTray/SearchProducts
• Search for Product Info! • View Bill of Materials! • Even Receive a Price Quote!
13
800-851-7415 ext. 366
Ask the Experts!
TrayCAD
By Just ONE Click of the Mouse Button add B-Line Cable Tray to your next set of Plans.
FREE! To Download or order a FREE copy of TrayCAD®
Go to: www.cooperbline.com and click on Software & Specifications
Directly: http://www.cooperbline.com/engineer/#TrayCad Call: (800) 851-7415 TrayCAD® 4.0 is a cable tray layout design program that works with AutoCAD® R14 and 2000. TrayCAD® 4.0 is a Windows® based program and installs as an add-on to your AutoCAD® system. Use the TrayCAD® toolbar to add cable tray to your plans by drawing a single line as the center line of the tray run, then, with the click of a button, the program will build a 3-D wire-frame model of the cable tray and all of the appropriate fittings. The program will also create a Bill of Materials and contains a library of details.
www.cooperbline.com
14
Construction Specifications Cooper B-Line gives . . .
Just the Facts on:
Construction Specifications All specs are arranged as to their recommended CSI MasterFormat™ Divisions.
w e Vi All Construction Specifications Documents
On-Line Download or
in Microsoft Word format http://www.cooperbline.com/engineer/specs.asp
If you need more information about this or any other great B-Line product Just . . .
15
800-851-7415 ext. 366
Aluminum Cable Channel Cable Tray
• • • •
Perfect for Light Duty Applications Economical Great for Limited Space Ventilated or Non-Ventilated
Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.cooperbline.com
16
pg. pg. pg. pg. pg.
17 18 20 21 22
Aluminum Cable Channel
Short Span
Cable Channel • Aluminum
Straight Sections
Straight Section Part Numbering Prefix Example: A CC - 04 - 120 Material
Type
A = Aluminum 6063-T4
Width
CC = Ventilated Cable Channel CCN = Non-Ventilated Cable Channel
Length x
03 = 3" 04 = 4" 06 = 6"
➁
144 = 12 ft. 120 = 10 ft.
xPrimary
Length. Length.
➁Secondary
Non-Ventilated
Ventilated
Ventilated straight sections contain 21/4" diameter holes and 3/16" x 7/8" slots for cable attachment. Ventilated straight sections also have splice holes repeating every 12" to simplify field modifications. Material
Width
Depth
UL Area
Load Data *
Type
in.
in.
in.2
Safety Factor = 1.5
5
6
10
12
Safety Factor = 1.5
1.5
1.8
3.0
3.7
3
1.25
Load (lbs/ft)
22
15
5
4
Load (kg/m)
33
22
07
06 13.997
Aluminum
0.6
Support Span (Ft)
Load Data *
Support Span (m)
(75)
(32)
Deflection Multiplier
0.025
0.051
0.395
0.820
Deflection Multiplier
.427
0.871
6.743
4
1.75
Load (lbs/ft)
48
33
12
8
Load (kg/m)
71
49
18
12
(100)
(44)
Deflection Multiplier
0.0071
0.015
0.114
0.236
Deflection Multiplier
0.121
0.256
1.946
4.028
6
1.75
Load (lbs/ft)
52
36
13
9
Load (kg/m)
77
54
19
13
(150)
(44)
Deflection Multiplier
0.0055
0.011
0.088
0.183
Deflection Multiplier
0.094
0.188
1.502
3.124
0.6
1.00
To calculate simple Beam Deflection in inches, multiply the design load (lbs/ft) by the Deflection Multiplier shown for the span. To calculate simple Beam Deflection in millimeters, multiply the design load (kg/m) by the Deflection Multiplier shown for the span. All dimensions in parentheses are millimeters unless otherwise specified. * Load data is determined by realistic deflection, not by failure.
17
800-851-7415 ext. 366
Aluminum Cable Channel
Short Span
Channel Cable Tray Connectors
Fast, economical, space saving Channel Cable Tray Connectors Patent No. 5,628,481; 5,782,439. Other patents pending. Horizontal:
90˚ Bend
Cross
Tee
• Provides 0 or 6-inch radius connection for Cable Channel • The Pivot Connector is available for custom angle adjustment • up to +/– 45˚ angle adjustment • order the desired quantity separately • Slotted for easy cable fastening • Shipped with the required hardware Pivot Connector
Vertical:
90˚ Bend 6-inch radius
90˚ Vertical Square Connector 0-inch radius
Pivot Connector
• Use the same part for VO and VI applications • Slotted for easy cable fastening • The Pivot Connector is available for custom angle adjustment (order separately) • Shipped with the required hardware Connector Part Numbering Prefix Example: A CC - 04 - 90HC 060
Material A = Aluminum
www.cooperbline.com
Tray Type CC = Ventilated Cable Channel
Width
Connector Type
Radius
03 = 3" 04 = 4" 06 = 6"
90HC = 90˚ Horizontal HTC = Horizontal Tee HXC = Horizontal Cross 90VC = 90˚ Vertical PC = Pivot Connector
Horizontal Connectors 060 = 0" & 6" Radii Vertical Connectors 00 = 0" Radius 06 = 6" Radius
18
Aluminum Cable Channel
Short Span
ACCN-04-90HB12 Non-Ventilated Horizontal Bend
Cable Channel • Aluminum
Fittings
ACCN-04-HT12 Non-Ventilated Tee
Fittings engineered with 3" tangents for splicing integrity.
ACC-04-HX12 Ventilated Horizontal Cross
ACC-04-90VO12 Ventilated Vertical Bend
Fittings Part Numbering Prefix Example: A CCN - 04 - 90 HB 24
Material A = Aluminum
Tray Type *CC = Ventilated Cable Channel CCN = Non-ventilated Cable Channel
Width 03 = 3" 04 = 4" 06 = 6"
Angle 30 45 60 90
= = = =
30° 45° 60° 90°
Fitting Type HB = Horizontal Bend HT = Horizontal Tee HX = Horizontal Cross VI = Vertical Inside Bend VO = Vertical Outside Bend
Radius 12 = 12" 24 = 24" 36 = 36"
* Ventilated Cable Channel Fittings are available only in 12" and 24" radii.
19
800-851-7415 ext. 366
Aluminum Cable Channel
Short Span
Accessories Splice Plate
Blind End Plate
The Splice Plate has the standard 4-hole pattern for all cable channel. • Provided with straight sections and fittings. • Furnished as one plate with hardware.
Catalog No.
Channel Width
The Blind End Plate forms a closure for any cable channel dead end. • Furnished as one plate with hardware.
Catalog No.
Channel Width
9A-1043
in. 3
mm 76
9A-1583
in. 3
mm 76
9A-1044 9A-1044-6
4 6
101 152
9A-1584 9A-1586
4 6
101 152
Horizontal Adjustable Splice Plate
Vertical Adjustable Splice Plate
The Horizontal Adjustable Splice Plate adapts to changes in direction in a horizontal plane, beyond the capability of the standard horizontal fittings. • Furnished as one plate with hardware.
The Adjustable Splice Plate allows changes in elevation where standard vertical fittings are not applicable. • Furnished as one plate with hardware.
Catalog No.
Channel Width in. 3 4 6
9A-1743 9A-1744 9A-1746
mm 76 101 152
Catalog No. 9A-1643 9A-1644 9A-1646
Channel Width in. 3 4 6
mm 76 101 152
Channel To Tray or Channel To Channel Connector
Box Connector
Channel to Tray
The Box Connector is used to attach the end of a cable channel run to a distribution box or a control center. • Furnished as one connector with hardware.
Catalog No.
Channel Width
9A-1543
in. 3
mm 76
9A-1544 9A-1546
4 6
101 152
Channel to Channel
Catalog No.
Channel Width
9A-1261-3
in. 3
mm 76
9A-1261-4 9A-1261-6
4 6
101 152
The Channel Connector is used to link a cable channel to a cable tray, or a cable channel to cable channel. • Furnished as one plate with hardware.
Channel Reducer Plate
Mounting Bracket - Channel To Tray
The Channel Reducer Plate is used to join cable channel sections of different widths. • Furnished as one plate with hardware.
The Mounting Bracket allows a parallel run of cable channel to be attached to the side of a cable tray. It can also serve as a support splice connection. • Furnished as one bracket. • Order hardware separately.
Catalog No.
Channel Width
Catalog No.
Channel Width
9A-1843 9A-1863
in. 4 to 3 6 to 3
mm 101 to 76 152 to 76
9A-1237-3 9A-1237-4
in. 3 4
mm 76 101
9A-1864
6 to 4
152 to 101
9A-1237-6
6
152
All dimensions in shaded areas are millimeters unless otherwise specified.
www.cooperbline.com
20
Aluminum Cable Channel
Short Span
Expansion Guide Clamp
Hold-Down Clamp
The Expansion Guide Clamp allows cable channel to expand and contract in the horizontal plane, but not in the transverse plane. • Furnished as one clamp. • Order 1/2" hardware separately.
The Hold-Down Clamp secures cable channel to a support member. • Furnished as one clamp. • Order 1/2" hardware separately.
Catalog No.
Catalog No.
Channel Width
Cable Channel • Aluminum
Accessories
Channel Width
9A-1243
in. 3
mm 76
9A-1245
in. 3
mm 76
9A-1244 9A-1244
4 6
101 152
9A-1246 9A-1246
4 6
101 152
Channel To Floor Base Plate
Cable Channel Bushing
The Channel to Floor Base Plate is used to attach the end of a cable channel run to the floor or to an equipment mounting pad. • Anchors and hardware are ordered separately.
The Cable Channel Bushing is a snap-in plastic bushing used to protect cable insulation from mechanical wear.
Catalog No.
Channel Width
9A-3305-3 9A-3305-4 9A-3305-6
in. 3 4 6
mm 76 101 152
Catalog No.
99-1125
Cable Channel Bracket
Cable Channel Bracket
• Finishes available: ZN, HDG
• Finishes available: ZN, HDG, GRN A
Catalog No. Channel Width B185CCL
in. 3 4 6
mm 76 101 152
Catalog No.
8"
B409-6 B409-9
Channel Width
A
in.
mm
in.
mm
3 4, 6
76 101, 152
6 9
152 228
Cable Channel Hanger Single Cable Channel Hanger and Wall Mount
Designed for 1/2" Threaded Rod, Double Nut Installation Channel Width in. mm in. mm in. Material 3
150 lb. Safety Factor 3.0
76
4
101
61
Double Cable Channel Hanger
mm 52
Zinc Plated Steel Double Channel Single Channel
9ZN-1232-3 9ZN-1231-3 & 4
9ZN-1232-4 9ZN-1231-3 & 4
9ZN-1232-6 9ZN-1231-6
HDGAF Steel (18 Ga.) Double Channel Single Channel
9G-1232-3 9G-1231-3 & 4
9G-1232-4 9G-1231-3 & 4
9G-1232-6 9G-1231-6
21
265 lb. Safety Factor 3.0
800-851-7415 ext. 366
Aluminum Cable Channel
Short Span
Cable Channel Covers
90° HB
Straight Section
Covers Part Numbering x Prefix Example: 80 8 A 40 - 04 - 144
Cover Type
Detail
Material
8 = Flanged
A = Aluminum
80 = Solid
Material Thickness
Tray Width
40 = .040 Aluminum
03 = 3" 04 = 4" 06 = 6"
Item Description For Straight Section Cover:
Aluminum: 144 = 12 ft. 120 = 10 ft.
Aluminum: 72 = 6 ft. 60 = 5 ft. For fitting covers: Insert suffix of fitting to be covered.
Straight Section Part Number Material Aluminum (.040) Solid
Channel Width Length 12' (3.56m) 10' (3.05m)
in. 3
mm 76
in. 4
808A40-03-144 808A40-03-120
mm 101
808A40-04-144 808A40-04-120
in. 6
mm 152
808A40-06-144 808A40-06-120
Fitting covers are available. To order, use the cover prefix followed by the fitting description. Ex: 808A40 - 03 - 90HB12.
Wrap-Around Cover Clamp
Combination Hold-Down & Cover Clamp
Wrap-Around Cover Clamps are used to securely hold a cover on cable channel in locations where strong winds can prevail. • Furnished as one clamp with hardware.
This clamp is used to hold both the cable channel and cover in place at the same time. • Furnished as one clamp. • Order 1/4" hardware separately.
Catalog No.
Catalog No.
Channel Width
9A-9033 9A-9034
in. 3 4
mm 76 101
9A-9036
6
152
9A-9023 9A-9024 9A-9024
All dimensions in shaded areas are millimeters unless otherwise specified.
www.cooperbline.com
22
Channel Width in.
mm
3 4 6
76 101 152
Aluminum Cable Channel
Short Span
Section 1- Acceptable Manufacturers 1.01
Manufacturer: Subject to compliance with these specifications, channel cable tray systems shall be as manufactured by Cooper B-Line, Inc.
Section 2- Selection and Components 2.01
General: Except as otherwise indicated, provide ventilated metal channel cable trays, of types, classes and sizes indicated with splice connectors, fittings and all other necessary accessories for a complete system. Provide channel cable tray with rounded edges and smooth surfaces in compliance with applicable standards, and with the following additional requirements.
2.02
Material and finish: Material and finish specifications for aluminum channel cable tray are as follows: 1.
Aluminum: Extruded components shall be made from Aluminum Association Alloy 6063. All fabricated parts shall be made from Aluminum Association Alloy 5052.
2.03 Channel cable tray straight sections shall be constructed with ventilated flat bottom. Ventilated bottom shall be perforated with 2.25" diameter holes and have slots to facilitate the use of cable ties to secure the cables. 2.04 Straight sections shall be supplied in standard [12 foot] [10 foot (3 m)] lengths, except where shorter lengths are permitted to facilitate tray assembly as shown on drawings. 2.05
Ventilated straight sections shall have splice holes every 12 inches to simplify field modifications.
2.06
Channel cable tray width shall be [3] [4] [6] inches with a minimum loading depth of 11/4".
2.07
Fittings will have a minimum radius of [12] [24] [36] [48] inches.
2.08
Splice plates and hardware shall be included with each straight section and fitting.
23
800-851-7415 ext. 366
Cable Channel • Aluminum
Specifications
Aluminum Cent-R-Rail ® Cable Tray
• The Fastest Systems to Install • Maximum Cable Freedom Data-Track Straight Sections . . . . . . . . . . . . . . pg. Verti-Rack Straight Sections . . . . . . . . . . . . . . . pg. Half-Rack Straight Sections . . . . . . . . . . . . . . . . pg. Multi-Tier Half Rack Straight Sections . . . . pg. Straight Connectors . . . . . . . . . . . . . . . . . . . . . . . . pg. Horizontal Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg.
www.cooperbline.com
26 28 30 32 34 36
Horizontal Elbow & Tee Connectors . . . . . pg. Horizontal Cross Connectors . . . . . . . . . . . . . pg. Vertical Connectors . . . . . . . . . . . . . . . . . . . . . . . . pg. Multidirectional Connectors . . . . . . . . . . . . . . pg. Auxiliary Tray Supports . . . . . . . . . . . . . . . . . . . pg. Tray System Accessories . . . . . . . . . . . . . . . . . pg. Unbalanced Load Data . . . . . . . . . . . . . . . . . . . . pg.
24
34 39 40 41 44 50 64
Cent-R-Rail ®
Short Span
Intermediate Span
The parts in the following catalog sections can be used with one or more of the Cent-R-Rail® systems. We have provided the following application bar to indicate the systems each item is compatible with. Indicates compatibility with DATA-TRACK® (When Icon appears in box)
Indicates compatibility with VERTI-RACK® (When Icon appears in box)
Indicates compatibility with HALF-RACK® (When Icon appears in box)
Indicates compatibility with MULTI-TIER HALF-RACK® (When Icon appears in box)
Example: Aluminum Center Rail End Cap
1
Cat. No. CAM-EC10B
2
1 1 Application bar indicates that this part can be used with DATA-TRACK® or HALF-RACK®, but not with VERTI-RACK® or MULTI-TIER HALF-RACK® 2 The shaded items illustrated in black lines are provided
2
25
800-851-7415 ext. 366
Cent-R-Rail® • Aluminum
Key to Using Application Bar
Cent-R-Rail ®
Short Span
Intermediate Span
Data-Track® Straight Sections
Data-Track® Straight Section with CAS-SB Splice Hanger shown
Rung Spacing
Loading Depth
• One CAS-SB Splice Hanger provided with each straight section
Patented (see page 63)
DATA-TRACK® Straight Section Part Numbering C3 A DB 09 - 12 - 144
Series C0=Straight Rung C3=3" Loading Depth C4=4" Loading Depth C6=6" Loading Depth
Material A=Aluminum
Type
Rung Spacing
DB=Bottom Rung DT=Top Rung
* Actual tray lengths are 142" and 118" to allow for splice hangers
www.cooperbline.com
26
06= 6" 09= 9" 12=12"
Width
Length*
06= 6" 09= 9" 12=12" 18=18" 24=24"
144=144" 120=120"
Cent-R-Rail ®
Short Span
Intermediate Span
DATA-TRACK® LOAD CAPACITIES Tray Width
Rung Spacing
5
(1.5)
6
Support Span ft. (m) 8 (2.4) 10
(1.8)
Rung * (3.0)
12
Avg. Empty Tray Weight
(3.7) Deflection
in.
(mm)
in.
(mm)
lbs/ft
(kg/m)
lbs/ft
(kg/m) lbs/ft
(kg/m)
lbs/ft
(kg/m)
lbs/ft (kg/m)
Multiplier
lbs/ft
(kg/m)
6
(150)
6 9 12
(150) (225) (300)
646 532 400
(961) (792) (595)
448 448 400
(667) (667) (595)
252 252 252
(375) (375) (375)
161 161 161
(240) (240) (240)
112 (167) 112 (167) 112 (167)
0.00002 0.00003 0.00004
1.38 1.25 1.20
(2.05) (1.86) (1.79)
9
(225)
6 9 12
(150) (225) (300)
532 354 266
(793) (527) (396)
448 354 266
(741) (527) (396)
252 252 252
(375) (375) (375)
161 161 161
(240) (240) (240)
112 (167) 112 (167) 112 (167)
0.00005 0.00008 0.0001
1.45 1.30 1.24
(2.16) (1.93) (1.85)
12
(300)
6 9 12
(150) (225) (300)
400 266 200
(595) (396) (298)
400 266 200
(595) (396) (298)
252 252 200
(375) (375) (298)
161 161 161
(240) (240) (240)
112 (167) 112 (167) 112 (167)
0.0002 0.0002 0.0003
1.53 1.35 1.28
(2.28) (2.01) (1.90)
18
(450)
6 9 12
(150) (225) (300)
266 178 134
(396) (265) (199)
266 178 134
(396) (265) (199)
252 178 134
(375) (265) (199)
161 161 134
(240) (240) (199)
112 (167) 112 (167) 112 (167)
0.0005 0.0007 0.0009
1.69 1.46 1.35
(2.51) (2.17) (2.01)
24
(600)
6 9 12
(150) (225) (300)
200 134 100
(298) (199) (149)
200 134 100
(298) (199) (149)
200 134 100
(298) (199) (149)
161 134 100
(240) (199) (149)
112 (167) 112 (167) 100 (149)
0.0011 0.0017 0.0022
1.85 1.56 1.43
(2.75) (2.32) (2.13)
Safety Factor = 1.5 for load capacities
5
Support Span (feet) 6 8 10
Center Rail Deflection Multiplier* 0.0012 0.0025
0.0079
0.0192
12 0.0397
* Deflection multipliers are given for English units. To determine deflection in millimeters, first calculate deflection in inches and then multiply by 25.4.
To calculate the center rail simple beam deflection at mid span in inches for a specific support span (ft), multiply the “center rail deflection multiplier” for that span by the load in lbs/ft that will be installed in the cable tray. Example: The center rail deflection for 50 lbs/ft supported every 12 ft = 50 x .0397 = 2.0 inches. Note: When trays are used in continuous spans, the deflection is reduced by as much as 50%. To calculate the rung deflection in inches for a specific tray width (in.) and rung spacing (in.), multiply the rung deflection multiplier for that width and rung spacing by the load in lbs/ft that will be installed in the cable tray. Example: The rung deflection for 50 lbs/ft in a 12" wide tray with 9" rung spacing = 50 x .0002 = .01 inches. Note: The rung deflection multiplier is based on a uniformly distributed load. Section Property Area Sx Ix
Center Rail
in2
0.88
0.13
(cm2)
(5.68)
(0.84)
in3
0.70
0.02
(cm3)
in4 (cm4)
(11.49)
1.17 (48.87)
Center Rail
Rungs
Rung (14mm)
.54"
1.63" (41mm)
.54"
(14mm)
(0.31) 3.25"
0.005
(82mm)
(0.21)
27
800-851-7415 ext. 366
Cent-R-Rail® • Aluminum
Data-Track® Straight Sections
Cent-R-Rail ®
Short Span
Intermediate Span
Verti-Rack® Straight Sections
Verti-Rack® Straight Section with CAS-SB Splice Hanger shown
• One CAS-SB Splice Hanger provided with each straight section
Rung Spacing 13/4" (44mm)
Patented (see page 63)
VERTI-RACK® Straight Section Part Numbering C2 A 4V 12 - 09 - 144
Series C0=Straight Rung C2=2" Loading Depth
Material A=Aluminum
Rung Spacing
Type† 2V=2 3V=3 4V=4 5V=5 6V=6
tier tier tier tier tier
06= 6" 09= 9" 12=12" (Specials available)
Width
Length*
03= 3" 06= 6" 09= 9" 12=12"
144=144" 120=120"
* Actual tray lengths are 142" and 118" to allow for splice hangers Additional rung options available, see engineering catalog CT-01 or visit www.cooperbline.com
Expand your VERTI-RACK® system with ADD-A-RUNG® ADD-A-RUNG® Part Numbering CAR-2 V 2 12 • Attaches to bottom of existing tray • Shipped with required hardware
No. of Tiers 1=1 tier 2=2 tier
Loading Depth 0=Straight Rung 2=2" Loading Depth
Note: Not to exceed 100 lbs/ft on 12 ft span, 225 lbs/ft on 8 ft span. Note: Dimensions for reference only, when critical contact factory.
www.cooperbline.com
28
Width 03= 3" 06= 6" 09= 9" 12=12"
Cent-R-Rail ®
Short Span
Intermediate Span
Support Span
Total System Load Capacities
Center Rail* Deflection
ft
(m)
lbs/ft
(kg/m)
Multiplier
5 6 8 10 12
(1.5) (1.8) (2.4) (3.0) (3.7)
300 300 225 144 100
(450) (450) (335) (214) (149)
0.0010 0.0020 0.0063 0.0155 0.0321
Tray Width
Rung Spacing
Cent-R-Rail® • Aluminum
Verti-Rack® Straight Sections
Per Tier Load Capacity
Rung* Deflection
Avg. Empty Tray Weight
in.
(mm)
in.
(mm)
lbs/ft
(kg/m)
Multiplier
lbs/ft
(kg/m)
3
(75)
6 9 12
(150) (225) (300)
608 408 304
(905) (607) (452)
0.00001 0.00002 0.00002
2.09 1.72 1.55
(3.11) (2.56) (2.31)
6
(150)
6 9 12
(150) (225) (300)
304 204 152
(452) (304) (226)
0.0001 0.0002 0.0002
2.31 1.86 1.66
(3.44) (2.77) (2.47)
9
(225)
6 9 12
(150) (225) (300)
203 136 102
(302) (202) (152)
0.0003 0.0004 0.0005
2.53 2.00 1.77
(3.76) (2.98) (2.63)
12
(300)
6 9 12
(150) (225) (300)
152 102 76
(226) (152) (113)
0.0006 0.0009 0.0012
2.75 2.14 1.88
(4.09) (3.18) (2.80)
Safety Factor = 1.5 for load capacities
* Deflection multipliers are given for English units. To determine deflection in millimeters, first calculate deflection in inches and then multiply by 25.4.
Example: The center rail deflection for 50 lbs/ft supported every 12 ft = 50 x .0321 = 1.6 inches. Example: The rung deflection for 50 lbs/ft in a 12" wide tray with 9" rung spacing = 50 x .0009 = .05 inches.
Section Property Area Sx Ix
Center Rail
Rungs
Trunk
in2
0.88
0.09
0.18
(cm2)
(5.68)
(0.61)
(1.16)
in3
0.56
0.01
N/A
(cm3)
(9.15)
(0.12)
(N/A)
in4 (cm4)
1.27 (52.99)
0.001
N/A
(0.04)
(N/A)
29
Center Rail
Trunk
1.63"
Rung
(18mm)
(14mm)
.71"
.54"
(41mm)
.71"
(18mm)
.31"
3.90" (99mm)
800-851-7415 ext. 366
(8mm)
Cent-R-Rail ®
Short Span
Intermediate Span
Half-Rack® Straight Sections
Half-Rack® Straight Section with CAS-SB Splice Hanger shown
Rung Spacing
• One CAS-SB Splice Hanger provided with each straight section
Loading Depth
Patented (see page 63)
HALF-RACK® Straight Section Part Numbering C3 A 1H 09 - 12 - 144
Series C0=Straight Rung C3=3" Loading Depth C4=4" Loading Depth C6=6" Loading Depth
Rung Spacing
Material
Type
A=Aluminum
1H=1 tier
* Actual tray lengths are 142" and 118" to allow for splice hangers
www.cooperbline.com
30
06= 6" 09= 9" 12=12"
Width
Length*
03= 3" 06= 6" 09= 9" 12=12"
144=144" 120=120"
Cent-R-Rail ®
Short Span
Intermediate Span
Cent-R-Rail® • Aluminum
Half-Rack® Loading Guidelines • Support Locations 1"
(25mm)
*24"
144"
(609mm)
(3.7m)
(12') Length Section
Mid Length
*= 20"
(508mm)
for 120"
(3m)
Length Section *24"
(609mm)
Sections should be attached to the wall at mid length and at 1/6th of the section length from both ends (20" for 120"; 24" for 144") • No spacers needed
• Loading Recommendations • CSA classified A-3M • 50 lbs/ft (74kg/m) maximum based on 3/4"
(19mm)
rung deflection
Typical load testing method Center Rail Section Property Area Sx Ix
Center Rail 0.88
0.13
(cm2)
(5.68)
(0.84)
in3
0.70
0.02
(11.49)
(0.31)
in4 (cm4)
1.17 (48.87)
(14mm)
Rungs
in2
(cm3)
Rung .54"
1.63"
(41mm)
.54"
(14mm)
3.25" (82mm)
0.005 (0.21)
31
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Multi-Tier Half-Rack® Straight Sections
A
Multi-Tier Half-Rack® Straight Section with CAS-SB Splice Hanger shown
A = 25/8" = 13/4"
(67mm) (44mm)
for 3" for 4"
(76mm)
Loading Depth Loading Depth
(102mm)
• One CAS-SB Splice Hanger provided with each straight section Rung Spacing
Patented (see page 63) Loading Depth
MULTI-TIER HALF-RACK® Straight Section Part Numbering C3 A 2M 09 - 12 - 144
Series C0=Straight Rung C3=3" Loading Depth C4=4" Loading Depth
Material
Type
Rung Spacing
A=Aluminum
2M=2 tier 3M=3 tier 4M=4 tier
06= 6" 09= 9" 12=12" (Specials available)
Width
Length*
03= 3" 06= 6" 09= 9" 12=12"
144=144" 120=120"
* Actual tray lengths are 142" and 118" to allow for splice hangers ®
®
Expand your MULTI-TIER HALF-RACK system with ADD-A-RUNG • Attaches to bottom of existing tray • Shipped with required hardware
ADD-A-RUNG® Part Numbering CAR-2 M 3 12 No. of Tiers 1=1 tier 2=2 tier
Loading Depth 0=Straight Rung 3=3" Loading Depth 4=4" Loading Depth
Width 03= 3" 06= 6" 09= 9" 12=12"
Note: Not to exceed 100 lbs/ft on 12 ft span, 225 lbs/ft on 8 ft span.
www.cooperbline.com
32
Cent-R-Rail ®
Short Span
Intermediate Span
Multi-Tier Half-Rack® Loading Guidelines
1"
144"
(25mm)
*24"
(3.7m)
Cent-R-Rail® • Aluminum
• Support Locations (12') Length Section
(609mm)
Mid Length
*24"
*= 20"
(508mm)
for 120"
(3m)
(609mm)
Length Section
Sections should be attached to the wall at mid length and at 1/6th of the section length from both ends (20" for 120"; 24" for 144") • No spacers needed
• Loading Recommendations • 50 lbs/ft
(74kg/m)
per tier maximum based on 3/4"
(19mm)
rung deflection
Half-Rack® shown
Typical load testing method Center Rail Section Property Area Sx Ix
Center Rail
Rungs
Trunk
in2
0.88
0.13
0.18
(cm2)
(5.68)
(0.84)
(1.16)
in3
0.56
0.02
N/A
(cm3)
(9.15)
(0.31)
(N/A)
in4
1.27
0.005
N/A
(0.21)
(N/A)
(cm4)
(52.99)
33
Rung
Trunk
1.63"
(18mm)
(14mm)
.71"
.54"
(41mm)
.71"
(18mm)
.54"
(14mm)
3.90" (99mm)
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Straight Connectors Qwik-Bolt® Splice Hanger Cat. No. CAS-SB Patented (see page 63)
• One splice included with each straight section • Bolts screw directly into splice, minimizing hardware • Splice protects cables from center rail edges • Vertical hardware removes hardware from cable fill area • Shipped assembled with required hardware • Designed to install with 1/2" ATR • UL classified for grounding - 1000 amps
Qwik-Bolt® No Gap Splice Cat. No. CAS-NG Patented (see page 63)
• A straight splice option • Bolts screw directly into splice, minimizing hardware • Vertical hardware removes hardware from cable fill area • Shipped assembled with required hardware • UL classified for grounding - 1000 amps • Straight section length (using this splice) is 142 or 118 inches • For use where ATR is not required through the splice hanger Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
www.cooperbline.com
34
Intermediate Span
Cent-R-Rail ®
Short Span
Intermediate Span
Straight Connectors Cat. No. CAC-OH050B CAC-OH065B CAC-OH080B CAC-OH100B CAC-OH130B
Cent-R-Rail® • Aluminum
Horizontal Offset Coupling Offset in.
(mm)
5.0 6.5 8.0 10.0 13.0
(125)
offset
(165) (200) (250) (330)
Patented (see page 63)
• Designed to provide horizontal offset • Ideal for connecting DATA-TRACK® to HALF-RACK® • Pivoting connections • Qwik-Bolt® design • Shipped assembled with required hardware • UL classified for grounding - 1000 amps • 7/8" (22mm) adjustment on offset
Vertical Offset Coupling Cat. No.
Offset in.
CAC-OV030B CAC-OV060B
3.0 6.0
(mm)
(75) (150)
Patented (see page 63)
• • • • •
Designed to provide vertical offset Pivoting connections Qwik-Bolt® design Shipped assembled with required hardware UL classified for grounding - 1000 amps
offset
Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
35
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Horizontal Elbow Horizontal Adjustable Splice Cat. No. CAS-HB Patented (see page 59)
• Allows random angle horizontal bend • Also can be used to connect straight sections at mid-run locations • Qwik-Bolt® design • Shipped assembled with required hardware • UL classified for grounding - 1000 amps
Horizontal Bend Rung Support
Cat. No. CAR-H3-06
• • • • •
Loading Depth
Tray Width
0=0" 3=3" 4=4" 6=6"
06 = 6" 09 = 9" 12 = 12" 18 = 18" 24 = 24"
Use with CAS-HB For additional cable support on the outside of bends Select fill depth and width required Shipped with required hardware (1 pc. HHCS - 1/2" x 4" znplt) Rungs set at 45° angle
Cat. No. CAR-H3-06 CAR-H3-09 CAR-H3-12 CAR-H3-18 CAR-H3-24 CAR-H4-06 CAR-H4-09 CAR-H4-12 CAR-H4-18 CAR-H4-24 CAR-H6-06 CAR-H6-09 CAR-H6-12 CAR-H6-18 CAR-H6-24
Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
www.cooperbline.com
36
Cent-R-Rail ®
Short Span
Intermediate Span
DATA-TRACK® Horizontal Tee Coupling Tray 1 Width in.
(mm)
6 9 12 18 24
(150) (225) (300) (450) (600)
Cat. No.
L in.
(mm)
CAC-HTD06B 5 CAC-HTD09B 61/2 CAC-HTD12B 8 CAC-HTD18B 10 CAC-HTD24B 13
L
(125) (165) (200) (250)
Tray 1
(330)
Patented (see page 63)
• Used to make tee, elbow or wye • Allows random attachment to center rail without drilling • Pivoting connection • Qwik-Bolt® Design • Shipped assembled with required hardware • 9/16" (14mm) hole provided for optional support ATR • 7/16" (11mm) adjustment slot • UL classified for grounding - 1000 amps
VERTI-RACK® Horizontal Tee Coupling Tray 1 Width in.
(mm)
3 6 9 12
(75) (150) (225) (300)
Cat. No.
Tray 1 L
L in.
CAC-HTV03B 3 CAC-HTV06B 41/2 CAC-HTV09B 6.0 CAC-HTV12B 71/2
(mm)
(75) (115) (150) (190)
Patented (see page 63)
• Used to make tee, elbow or wye • Allows random attachment to center rail without drilling • Pivoting connection • Qwik-Bolt® design • Shipped assembled with required hardware • 7/16" (11mm) adjustment slot • UL classified for grounding - 1000 amps Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
37
800-851-7415 ext. 366
Cent-R-Rail® • Aluminum
Horizontal Elbow & Tee Connectors
Cent-R-Rail ®
Short Span
Intermediate Span
Horizontal Elbow & Tee Connectors Tray 1
L
HALF-RACK® Horizontal Tee Coupling Tray 1 Width
Cat. No.
L
in.
(mm)
in.
(mm)
3 6 9 12
(75)
CAC-HTH03B 5 CAC-HTH06B 8 CAC-HTH09B 11 CAC-HTH12B 14
(125)
(150) (225) (300)
(200) (275) (355)
Patented (see page 63)
• Used to make tee, elbow or wye • Allows random attachment to center rail • Pivoting connection • Qwik-Bolt® design • Shipped assembled with required hardware • UL classified for grounding - 1000 amps
MULTI-TIER HALF-RACK® Horizontal Tee Coupling
Tray 1 L
Tray 1 Width
Cat. No.
L
in.
(mm)
in.
(mm)
3 6 9 12
(75)
CAC-HTM03B 5 CAC-HTM06B 8 CAC-HTM09B 11 CAC-HTM12B 14
(125)
(150) (225) (300)
(200) (275) (355)
Patented (see page 63)
• Used to make tee, elbow or wye • Allows random attachment to center rail • Pivoting connection • Qwik-Bolt® design • Shipped assembled with required hardware • UL classified for grounding - 1000 amps
Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
www.cooperbline.com
38
Cent-R-Rail ®
Short Span
Intermediate Span
DATA-TRACK® Horizontal Cross Coupling Tray 1 Width in.
(mm)
6 9 12 18 24
(150) (225) (300) (450) (600)
Cat. No. CAC-HXD06B CAC-HXD09B CAC-HXD12B CAC-HXD18B CAC-HXD24B
L in.
(mm)
10 13 16 20 26
(250)
L
•
Tray 1
(330) (400) (500) (650)
Patented (see page 63)
Allows random attachment to center rail without drilling • • • •
Pivoting connections Qwik-Bolt® design Shipped assembled with required hardware 9/16" (14mm) hole provided for optional support ATR • UL classified for grounding - 1000 amps
VERTI-RACK® Horizontal Cross Coupling Tray 1 Width in.
3 6 9 12
Cat. No.
L
L
(mm)
in.
(mm)
(75)
CAC-HXV03B 6 CAC-HXV06B 9 CAC-HXV09B 12 CAC-HXV12B 15
(150)
(150) (225) (300)
Tray 1
(225) (300) (375)
Patented (see page 63)
• Allows random attachment to center rail without drilling • Pivoting connections • Qwik-Bolt® design • Shipped assembled with required hardware • 9/16" (14mm) hole provided for optional support ATR • UL classified for grounding - 1000 amps
Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
39
800-851-7415 ext. 366
Cent-R-Rail® • Aluminum
Horizontal Cross Connectors
Cent-R-Rail ®
Short Span
Intermediate Span
Vertical Connectors Vertical Adjustable Splice Cat. No. CAS-VB Patented (see page 63)
• • • •
Ideal for random angle vertical bends Qwik-Bolt® design Shipped assembled with required hardware UL classified for grounding - 1000 amps
Vertical Coupling Cat. No. CAC-VB Patented (see page 63)
• • • • • •
Use one piece to create vertical tees. Use two pieces to create vertical crosses. Pivoting connections Qwik-Bolt® design Shipped assembled with required hardware UL classified for grounding - 1000 amps
Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
www.cooperbline.com
40
Cent-R-Rail ®
Short Span
Intermediate Span
Cent-R-Rail® • Aluminum
Multidirectional Connectors
Width
Fill Depth
Universal Hub Fittings Cat. No. U 4A- 12 Fill Depth 2=2" 3=3" 4=4" 6=6"
Width 06 = 09 = 12 = 18 = 24 =
6" 9" 12" 18" 24"
Patented (see page 63)
• Connects up to 4 trays in random directions • Provides an area free of center rails for cable transitions • Ideal for easy system expansion • Slots provided for cable tie down • Order one CAC-UFB pivot connector per tray connection • Positive cable retention for cables routed around corner post • UL classified for grounding - 1000 amps
Cat. No. U2A-06 U2A-09 U2A-12 U2A-18 U2A-24 U3A-06 U3A-09 U3A-12 U3A-18 U3A-24 U4A-06 U4A-09 U4A-12 U4A-18 U4A-24 U6A-06 U6A-09 U6A-12 U6A-18 U6A-24
Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
41
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Multidirectional Connectors
Pivot Connector Cat. No.
Application
CAC-UFB
Horizontal
Patented (see page 63)
• Qwik-Bolt® design • Shipped with required hardware • UL classified for grounding - 1000 amps
Cable Radius Protector Cat. No.
Tray Depth
CAM-PR253 CAM-PR254 CAM-PR256
3 4 6
• Designed to provide a 21/2" cable bend radius • Mounts directly over the horizontal pivot connector using the existing hardware • Made from aluminum
Note: All connectors are aluminum material and sized for 1/2" zinc plated steel hardware, unless otherwise specified.
www.cooperbline.com
42
Cent-R-Rail ®
Short Span
Intermediate Span
Multidirectional Connectors
ELBOW
TEE
CROSS
WYE
43
800-851-7415 ext. 366
Cent-R-Rail® • Aluminum
Typical applications for universal hub fittings:
Cent-R-Rail ®
Short Span
Intermediate Span
Auxiliary Tray Supports
DATA-TRACK® Standard Clevis Hanger Cat. No.
Rod Size
CZNH-CD CZNH-CD-5/8
1/2" 5/8"
• Allows random support without drilling • Zinc plated steel construction • If seismic restraints required, see Seismic Restraints Cent-R-Rail® Supplement brochure (SRSCR1)
VERTI-RACK® Standard Clevis Hanger Cat. No.
Rod Size
CZNH-CV CZNH-CV-5/8
1/2" 5/8"
• Allows random support without drilling • Zinc plated steel construction
www.cooperbline.com
44
Cent-R-Rail ®
Short Span
Intermediate Span
Auxiliary Tray Supports Cat. No.
Tray Type
CZNH-CD-I CZNH-CV-I
Data-Track® Verti-Rack®
Cent-R-Rail® • Aluminum
Isolation Clevis Hanger
Data-Track® shown
• Isolates tray from ATR to reduce low voltage interference • Nylon bushing • Allows random support without drilling • Zinc plated steel construction • Used with 1/2" ATR
Wall Hanger - Half Rack® Cat. No. CZNH-WH
• • • • • •
Simplifies bolt to anchor alignment. Center rail drilling eliminated. Hanger bottom snaps over center rail. Smooth edge design in wire fill areas. Zinc plated steel construction Sized for up to a 1/2" bolt.
Wall Hanger - Multi-Tier Half Rack® Cat. No. CZNH-WM • • • • • •
Simplifies bolt to anchor alignment. Center rail drilling eliminated. Hanger bottom snaps over center rail. Smooth edge design in wire fill areas. Zinc plated steel construction Sized for up to a 1/2" bolt.
45
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Auxiliary Tray Supports U-Bracket: In Drywall & Metal Stud Wall Cat. No. Half-Rack CPB-U10
Flat Washers CPB-U10 U-Bracket
Multi-Tier Half-Rack CPB-CV1
Half-Rack® Metal Cable Tray Screws
1/4"
Metal Stud
Floor Stands
Height
13/16" (21mm)
Width
Cat. No.
Height in.
(mm)
in.
(mm)
B381 B382 B383 B384 B385
23/8 43/8 63/8 83/8 103/8
(60.3)
6 8 10 12 14
(152.4)
(111.1) (161.9) (212.7) (263.5)
Width
(203.2) (254.0) (304.8) (355.6)
• Zinc plated steel construction • 9/16" (14mm) holes
Relay Rack Mounting Bracket Cat. No. SB-2133-CR • ASTM A36 Steel • Yellow zinc dichromate • Includes: Mounting plates 1 - 1/2" x 41/2" HHCS 1 - 1/2" hex nut 2 - 5/16" x 3" SRHMS 2 - 5/16" hex nuts 2 - 5/16" lock washers
www.cooperbline.com
46
Cent-R-Rail ®
Short Span
Intermediate Span
SQUARE WASHER
U-WASHER
Cat. No. B202
Cat. No. B450
Zinc Plated Steel
Cent-R-Rail® • Aluminum
Auxiliary Tray Supports
Zinc Plated Steel
90˚ ANGLE BRACKET
WALL BRACKET
Cat. No. B101
Cat. No. B370
Zinc Plated Steel
Zinc Plated Steel
“Z” BRACKET
“Z” BRACKET
Cat. No. B110AL
Cat. No. CAB-U25
Aluminum
Aluminum
47
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Data Track Straight Sections “U” BRACKET
“U” BRACKET
Cat. No. B107
Cat. No. B107-22A
Zinc Plated Steel
Zinc Plated Steel
“U” BRACKET
“U” BRACKET
Cat. No. CAB-U10
Cat. No. CAB-U20
Aluminum
Aluminum
“U” BRACKET
POST BASE
Cat. No. B594
Cat. No. B281ASQ
Zinc Plated Steel
Zinc Plated Steel
www.cooperbline.com
48
Cent-R-Rail ®
Short Span
Intermediate Span
Auxiliary Tray Supports
Cat. No.
Cent-R-Rail® • Aluminum
Non-Uniform Loading Bracket ATR Length 36 60 72
CZN-DRS-36 CZN-DRS-60 CZN-DRS-72 • • • •
Hardware included ATR included Zinc plated See Seismic Restraints Cent-R-Rail® Supplement brochure (SRSCR1) • Note: Refer to unbalance section in the appendix (pg. 65)
All Threaded Rod Stiffener • See Seismic Restraints Cent-R-Rail® Supplement brochure (SRSCR1) • Note: Minimum of (2) - SC228 are required per rod.
SC228 HANGER ROD STIFFENER ASSEMBLY For 3/8" thru 5/8" ATR (Order B22 Channel Separately)
SC228 Hanger Rod Stiffener Assembly
B22 Channel Rod Stiffener
1/2"
• • • • • •
1 1 9 2 1 2
Includes: - B107 Znplt U Support - B107-22A Znplt U Support - 1/2" Hex Nuts, Znplt - ATR 1/2" x Length, Znplt - HHC Screw 1/2" x 41/2", Znplt - B202 Znplt sq washers
Maximum distance from top of hanger rod to first bolt of the channel rod stiffener is 6" (152mm).
1/2"
ATR
Maximum distance between each SC228 is 18" (457mm).
Maximum distance from top of channel where the hanger rod is attached to the first bolt of the channel rod stiffener is 6" (152mm).
B22 Channel Rod Stiffener with SC228 Assemblies
ATR
SC228
49
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories Cable Drop-Out
Cat. No. CAM-DO-1 CAM-DO-2 CAM-DO-3 CAM-DO-4 CAM-DO-5 CAM-DO-7 CAM-DO-8 CAM-DO-10 CAM-DO-11
A
• Provides 3.25" (82mm) bend radius • Attaches to horizontal section of rung • Self-drilling screw included Tray Width in.
3 6 9 12 18 24
DATA-TRACK Bottom Rung N/A 2 3 5 7 10
®
Recommended Drop-out Width A* DATA-TRACK® HALF-RACK® Top Rung N/A 2 1 5 2 8 4 11 7 N/A 10 N/A
MULTI-TIER HALF-RACK® 2 5 8 11 N/A N/A
VERTI-RACK® Drop-Out
A in.
1 2 3 4 5 7 8 10 11
* Indicates widest Dropout that will fit in tray; part number for one side only
Cat. No. CAM-VDO-1 CAM-VDO-21/2 CAM-VDO-4 CAM-VDO-51/2
A in.
1.5 3 4.5 6
A
• Provides 3.25" (82mm) bend radius • Attaches to horizontal section of rung • Self-drilling screw included • Part number for one side only
Grounding Jumper Cat. No. CAM-GJ • Tin plated copper • 1000 Amps maximum fuse amperage rating • 12" (305mm) overall length • Provides electrical continuity between trays • Required with expansion splice hangers and when trays are discontinuous • For up to 1/2" hardware - not provided
www.cooperbline.com
50
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories • Solid floor system with the flexibility of a center rail system • Side remains open for cable exit/entry • Available in aluminum or pre-galvanized steel • Hemmed edges to provide smooth cable fill area • Shipped with self-drilling screws for easy field installation (Pan shown in Data-Track®)
Tray Width in.
3 6 9 12 18 24
DATA-TRACK® Bottom Rung
Pan Catalog Number DATA-TRACK® VERTI-RACK® HALF-RACK® Top Rung (one side -
(one side only)
(one side only)
one tier only)
N/A C(*)P-020-(†) C(*)P-035-(†) C(*)P-050-(†) C(*)P-072-(†) C(*)P-102-(†)
N/A C(*)P-012-(†) C(*)P-027-(†) C(*)P-042-(†) C(*)P-072-(†) C(*)P-102-(†)
C(*)P-008-(†) C(*)P-023-(†) C(*)P-038-(†) C(*)P-053-(†) N/A N/A
MULTI-TIER HALF-RACK® (one tier only)
C(*)P-020-(†) C(*)P-050-(†) C(*)P-080-(†) C(*)P-110-(†) N/A N/A
C(*)P-020-(†) C(*)P-050-(†) C(*)P-080-(†) C(*)P-110-(†) N/A N/A
(*) Material- Insert “A” for .040 aluminum or “P” for 20 Ga. pre-galvanized steel. Ordering information Example: CAP-035-144 (†) Length- Insert 060 for 60", 072 for 72", 120 for 120", or 144 for 144". Aluminum pan for 9" wide bottom rung Data-Track® in a 12 foot section.
Liner • Used to enclose a center rail system when desired • Available in aluminum or pre-galvanized steel • Hemmed edges to provide smooth cable fill area • Shipped with self-drilling screws for easy field installations (Liner shown in Data-Track®)
Tray Width in.
3 6 9 12 18 24
Liner Catalog Number DATA-TRACK® Bottom Rung
DATA-TRACK® Top Rung
(one side only)
(one side only)
(one side one tier only)
N/A C(*)L-D(x)-028-(†) C(*)L-D(x)-044-(†) C(*)L-D(x)-059-(†) C(*)L-D(x)-081-(†) C(*)L-D(x)-111-(†)
N/A C(*)L-D(x)-021-(†) C(*)L-D(x)-036-(†) C(*)L-D(x)-051-(†) C(*)L-D(x)-081-(†) C(*)L-D(x)-111-(†)
C(*)L-V2-014-(†) C(*)L-V2-029-(†) C(*)L-V2-044-(†) C(*)L-V2-059-(†) N/A N/A
VERTI-RACK®
HALF-RACK®
MULTI-TIER HALF-RACK® (one tier only)
C(*)L-D(x)-028-(†) C(*)L-D(x)-059-(†) C(*)L-D(x)-089-(†) C(*)L-D(x)-119-(†) N/A N/A
C(*)L-D(x)-028-(†) C(*)L-D(x)-059-(†) C(*)L-D(x)-089-(†) C(*)L-D(x)-119-(†) N/A N/A
(*) Material- Insert “A” for .040 aluminum or “P” for 20 Ga. pre-galvanized steel. (†) Length- Insert 060 for 60", 072 for 72", 120 for 120", or 144 for 144". (x) Loading Depth- Insert 3, 4 or 6 for applicable depth. Ordering information Example: CAL-D4-059-120 Aluminum liner for 12" wide bottom rung Data-Track® with 4" loading in a ten foot section.
51
800-851-7415 ext. 366
Cent-R-Rail® • Aluminum
Pan
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories Aluminum Center Rail End Cap Cat. No. CAM-EC10B Patented (see page 63)
• Internal cap for ends of center rail • Qwik-Bolt® design • Shipped with required hardware
Aluminum Center Rail End Cap Cat. No. CAM-EC20B Patented (see page 63)
• Internal cap for ends of center rail • Qwik-Bolt® design • Shipped with required hardware
Plastic Center Rail End Cap Cat. No. CPLM-EC10-Gray • Fits over end of center rail • Gray PVC material • Field installation
www.cooperbline.com
52
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories Cent-R-Rail® • Aluminum
Plastic Center Rail End Cap Cat. No. CPLM-EC20-Gray
• Fits over end of center rail • Gray PVC material • Field installation
Plastic Rung End Cap Cat. No. CPLM-EC30-* * Insert color: Gray is standard Optional-
• • • •
red blue black
white yellow
purple orange
Fits over end of rungs Used for cable identification PVC material Field installation
Plastic Rung End Cap Cat. No. CPLM-EC40-* * Insert color: Gray is standard Optional-
• • • •
red blue black
white yellow
purple orange
Fits over end of rungs Used for cable identification PVC material Field installation
53
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories Plastic Trunk End Cap Cat. No. CPLM-EC50-Gray
• Fits over end of vertical trunk • Gray PVC Material • Field installation
Plastic Rung Cavity Plug e B-LinRCP MCPL
Cat. No. CPLM-RCP
• To close rung cavity • Gray Polypropylene • UL94 Vø Rating e B-Lin CP -R CPLM
Conduit Adapter Cat. No.
• Designed to support or suspend light-duty stationary conduit runs • Zinc plated steel • Attaches to tray center rail (mounting hardware not included)
www.cooperbline.com
54
B1400 B1410 B1420 B1430 B1440 B1450 B1460 B1470 B1480 B1490
Conduit Size
Mounting Hardware Size
in.
(mm)
in.
(mm)
1/ 2 3/4
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
1/4
(6) (6) (6) (6) (8) (8) (8) (8) (8) (8)
1 11/4 11/2 2 21/2 3 31/2 4
1/4 1/4 1/4 5/16 5/16 5/16 5/16 5/16 5/16
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories Cat. No.
Cent-R-Rail® • Aluminum
Conduit Adapter Conduit Size
BL1400-C442 BL1410-C442 BL1420-C442 BL1430-C442 BL1440-C442 BL1450-C442
in.
(mm)
1 2
/ /
(15)
34
(20)
1 11/4 11/2 2
(25) (32) (40) (50)
• Connects conduit to Cent-R-Rail® • Easy one rung installation • Positions conduit between rungs • Shipped assembled with hardware
Conduit Adapter 6" (152mm) thru 12" (305mm) rung spacing Cat. No. Conduit Size
18" (457mm) thru 24" (609mm) rung spacing Cat. No. Conduit Size
Punched in. (mm)
CZNM-CA1S-1/2 CZNM-CA1S-3/4 CZNM-CA1S-1 CZNM-CA1S-11/4 CZNM-CA2S-11/2 CZNM-CA2S-2 CZNM-CA2S-21/2 CZNM-CA3S-3 CZNM-CA3S-31/2 CZNM-CA3S-4
1/2 3/4
1 11/4 11/2 2 21/2 3 31/2 4
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
6" (152mm) thru 12" (305mm) rung spacing Cat. No. Conduit Size in.
Punched in. (mm)
CZNM-CA1L-1/2 CZNM-CA1L-3/4 CZNM-CA1L-1 CZNM-CA1L-11/4 CZNM-CA2L-11/2 CZNM-CA2L-2 CZNM-CA2L-21/2 CZNM-CA3L-3 CZNM-CA3L-31/2 CZNM-CA3L-4
3/4
1 11/4 11/2 2 21/2 3 31/2 4
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
18" (457mm) thru 24" (609mm) rung spacing Cat. No. Conduit Size
Unpunched (mm)
CZNM-CA1S 1/2 thru 11/4 (15) thru (32) CZNM-CA2S 11/2 thru 21/2 (40) thru (65) CZNM-CA3S 3 thru 4 (80) thru (100)
1/2
in.
Unpunched (mm)
CZNM-CA1L 1/2 thru 11/4 (15) thru (32) CZNM-CA2L 11/2 thru 21/2 (40) thru (65) CZNM-CA3L 3 thru 4 (80) thru (100)
• Connects conduit to Cent-R-Rail® • Supported by two rungs for stability • Allows variable positioning between rungs • Items included: -mounting body -2 rung attachment clips with #10 self-drilling screws
55
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories DATA-TRACK® Tray-to-Wall Connector Cat. No. CZNT-WB1 • • • •
Easy to install Strong - 1/4" (6mm) steel Zinc plated - ASTM B633 Designed for up to 1/2" diameter wall attachment hardware (not included) • Cent-R-Rail® nut and bolt connector provided
VERTI-RACK® Tray-to-Wall Connector Cat. No. CZNT-WB2 • • • •
Easy to install Strong - 1/4" (6mm) steel Zinc plated - ASTM B633 Designed for up to 1/2" diameter wall attachment hardware (not included) • Cent-R-Rail® nut and bolt connector provided
Tray-to-Wall Connector Cat. No. CAT-WB Patented (see page 59)
• Connects tray end to wall for termination and support • Qwik-Bolt® design • Shipped with one bolt for tray connection (order 1/2" diameter wall mounting hardware separately)
www.cooperbline.com
56
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories Cent-R-Rail® • Aluminum
DATA-TRACK® Tray-To-Box Connector Cat. No. CAT-BDB 3 12B Rung Type B=Bottom rung T=Top rung
Loading Depth
Tray Width
3=3" 4=4" 6=6"
06= 6" 09= 9" 12=12" 18=18" 24=24"
Patented (see page 63)
• Connects tray to opening in enclosures • Qwik-Bolt® design • Shipped with one bolt for tray connection (order 1/4" diameter wall mounting hardware separately)
VERTI-RACK® Tray-To-Box Connector Cat. No. CAT-B4V06B Number of tiers
Tray Width
2=2 3=3 4=4 5=5 6=6
03= 3" 06= 6" 09= 9" 12=12"
tiers tiers tiers tiers tiers
Patented (see page 63)
• • • •
Designed for straight rung and 2” fill Connects tray to opening in enclosures Qwik-Bolt® design Shipped with one bolt for tray connection (order 1/4" diameter wall mounting hard ware separately)
57
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories HALF-RACK® Tray-To-Box Connector Cat. No. CAT-B1H 3 03B Loading Depth
Tray Width
3=3" 4=4" 6=6"
03= 3" 06= 6" 09= 9" 12=12"
Patented (see page 63)
• Connects tray to opening in enclosures • Qwik-Bolt® design • Shipped with one bolt for tray connection (order 1/4" diameter wall mounting hardware separately)
MULTI-TIER HALF-RACK® Tray-To-Box Connector Cat. No. CAT-B2M 03B Number of Tiers
Tray Width
2=2 tiers 3=3 tiers 4=4 tiers
03= 3" 06= 6" 09= 9" 12=12"
Patented (see page 63)
• • • •
www.cooperbline.com
Designed for 3” and 4” fill Connects tray to opening in enclosures Qwik-Bolt® design Shipped with one bolt for tray connection (order 1/4" diameter wall mounting hardware separately)
58
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories Cent-R-Rail® • Aluminum
Drill Fixture Cat. No. CAM-DF
• Locates splice holes to be drilled in field cut trays • Used to mark cut lines square • Requires 9/16" diameter drill bit (not included)
HALF-RACK® Blind End Cat. No. CAM-BE1 B 3 12 B Rung Type B=Bottom Rung T=Top Rung
Loading Depth
Tray Width
3=3" 4=4" 6=6"
06= 6" 09= 9" 12=12" 18=18" 24=24"
Patented (see page 63)
• Terminates cable tray run • Qwik-Bolt® design • Shipped with one bolt for tray connections
DATA TRACK® Blind End Cat. No. CAM-BED B 3 12 B Rung Type B=Bottom Rung T=Top Rung
Loading Depth
Tray Width
3=3" 4=4" 6=6"
06= 6" 09= 9" 12=12" 18=18" 24=24"
Patented (see page 63)
• Terminates cable tray run • Qwik-Bolt® design • Shipped with one bolt for tray connections 59
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories
MULTI-TIER HALF-RACK® Blind End Cat. No. CAM-BE2 M 12 B
Tier 2 Tier 3 Tier 4 Tier
Rung Type
Tray Width
M=Multi-Tier Half-Rack®
03= 3" 06= 6" 09= 9" 12=12"
Patented (see page 63)
• Designed for 3” and 4” fill • Terminates cable tray run • Qwik-Bolt® design • Shipped with one bolt for tray connections
VERTI-RACK® Blind End Cat. No. CAM-BE2 V 09 B
Tier 2 Tier 3 Tier 4 Tier
Rung Type
Tray Width
V=Verti-Rack®
03= 3" 06= 6" 09= 9" 12=12"
Patented (see page 63)
• Designed for straight run and 2” fill • Terminates cable tray run • Qwik-Bolt® design • Shipped with one bolt for tray connections
www.cooperbline.com
60
Cent-R-Rail ®
Short Span
Intermediate Span
Cent-R-Rail® • Aluminum
Tray System Accessories Straight Section Barriers Cat. No.
Tray Loading Depth
Length
C73A-144 C74A-144 C76A-144 C73A-120 C74A-120 C76A-120
3" 4" 6" 3" 4" 6"
144" 144" 144" 120" 120" 120"
• Separates cable randomly in straight tray • Furnished with 4 rung attachment clips, hardware and one splice
Horizontal Bend Barriers Cat. No.
Tray Loading Depth
C73A-90HBFL C74A-90HBFL C76A-90HBFL
3" 4" 6"
• Separates cables randomly • Standard Length: 72" (6 ft) (1.8m) • Horizontal bend barriers are flexible in order to conform to any horizontal bend • Furnished with 3 rung attachment clips, hardware and one splice
61
800-851-7415 ext. 366
Cent-R-Rail ®
Short Span
Intermediate Span
Tray System Accessories Rung Attachment Clip Cat. No. CZNM-RC
• Used to attach barrier strips without screwing into rungs • One #10 x 1/2" self-drilling screw included
K1 Cover • Available in .040 (1mm) aluminum • Available in 20 (.9mm) gauge pre-galvanized steel. • Notched for 1/2" ATR (hardware not included). • Full 1/2" flange. • Available in 10 ft. (120") (3.0m) and 12 ft. (144") (3.7m) sections. Bottom Rung Data-Track® Cat. No. Overall Width in.
C(*)K1F-DB-06-(length) C(*)K1F-DB-09-(length) C(*)K1F-DB-12-(length) C(*)K1F-DB-18-(length) C(*)K1F-DB-24-(length)
9.000 12.000 15.000 19.375 25.375
Top Rung Data-Track® Cat. No. Overall Width
(mm)
(228.60) (304.80) (381.00) (492.13) (644.53)
in.
C(*)K1F-DT-06-(length) C(*)K1F-DT-09-(length) C(*)K1F-DT-12-(length) C(*)K1F-DT-18-(length) C(*)K1F-DT-24-(length)
(*) Insert “A” for .040" aluminum or “P” for 20 Ga. pre-galvanized steel. Ordering information: Example: CAK1F-DB-12-144 Aluminum flat flanged cover for bottom rung Data-Track, 12" wide, 12' long.
www.cooperbline.com
62
7.375 10.375 13.375 19.375 25.375
(mm)
(187.33) (263.53) (339.73) (492.13) (644.53)
Length Suffix Cover Length -120 120.00 -144 144.00
Cent-R-Rail ®
Short Span
Intermediate Span
DATA-TRACK® VERTI-RACK®
HALF-RACK® MULTI-TIER HALF-RACK®
Features Common to B-Line Cent-R-Rail® Systems: • The fastest cable tray systems to install • Sides and bottom are open for easy loading and inspection of cables • Light-weight, high-strength, corrosion-resistant aluminum construction • Provide the most freedom for cables to enter or exit - perfect for future change • Cable fill area is free of sharp edges and connection hardware • The splice can also be used to support the tray • Qwik-Bolt® splice maximizes installation speed and minimizes hardware • Clevis hangers are available for random support locations without drilling center rail • Systems are designed to install with 1/2" ATR • Cent-R-Rail® engineered to simplify the in-field drilling process and to provide post modification integrity • All Cent-R-Rail® Systems use the same internal connectors • All Cent-R-Rail® Systems are interactive with each other • Designed to interact with B-Line’s Strut System and Strut Raceway System • Comprehensive accessory options allow for complete installations without traditional cable tray fittings • Colored rung end caps are available for system labeling • UL Classified (cross sectional area 0.60 in2/1000 amps) • Patent Information The indicated patented products in this catalog are protected by one or more of the following patents. U.S. Patents 5,618,014; 5,628,481; 5,628,580; 5,634,614; 5,651,518; 5,564,658; 5,720,567; 5,730,400; 5,782,439; 5,816,542; 5,868,361. U.K. Patents 2,285,344; 2,317,508; 2,317,509. Germany Patent 4,447,144. Mexico-Pending. Canada Patent 2,139,201. 63
800-851-7415 ext. 366
Cent-R-Rail® • Aluminum
Features
Cent-R-Rail ®
Short Span
Intermediate Span
Unbalanced Load Distribution
DATA-TRACK® ALLOWABLE UNBALANCED LOAD DISTRIBUTION Group 1 - Loads under 25 lbs/ft Method Method Method Method
1 2 3 4
-
Loading Balance %*
1/2"
all thread rod with hex nuts on top and bottom of tray all thread rod with CZNH-CD clevis hanger 1/2" all thread rod stiffened with B22 and SC228’s (pg. 49) using CZN-DRS-72 (pg. 49)
Group 2 - Loads between 25 lbs/ft and 50 lbs/ft Method Method Method Method
1 2 3 4
-
65/35 65/35 80/20 100/0
1/2"
Loading Balance %*
1/2"
all thread rod with hex nuts on top and bottom of tray all thread rod with CZNH-CD clevis hanger 1/2" all thread rod stiffened with B22 and SC228’s (pg. 49) using CZN-DRS-72 (pg. 49) 1/2"
60/40 55/45 65/35 80/20
Failure was defined as a 6 degree horizontal tilt of the tray. Tests were performed on single sections of tray with a span of 12 ft between supports. Maximum hanger rod length tested was 6 ft. *Defined as percentage of total cable load allowed on one side of the tray.
Method 1
www.cooperbline.com
Method 2
Method 3
64
Method 4
Cent-R-Rail ®
Short Span
Intermediate Span
Unbalanced Load Distribution
To better understand uneven loading on center rail systems, B-Line® ran a series of tests on Data-Track®. Tests were performed with supports on twelve foot centers using 1/2" threaded rod. The maximum allowable tilt was set at six degrees. This angle was chosen purely for aesthetic reasons. It is nowhere near structural failure, but the point at which it started to look unacceptable.
6°
Center rail systems can be supported using different processes. For B-Line’s study, the following four were used:
Method 1
Method 2
Method 3
Method 4
Method 1: 1/2" ATR passing through splice hangers (CAS-SB) with hex nuts on top and bottom. 1 Method 2: /2" ATR with clevis (CZNH-CD). Method 3: 1/2" ATR reinforced with rod stiffener (B22 channel rod stiffener and SC228 hanger rod stiffener assembly). Method 4: CZN-DRS-72 special purpose support assembly. Combining the two loading groups and the four support methods, testing revealed the following: Group 1-Under 25 lbs/ft Method 1 Method 2 Method 3 Method 4
Loading Balance %* 65/35 65/35 80/20 100/0
Group 2 - 25 lbs/ft to 50 lbs/ft Method 1 Method 2 Method 3 Method 4
Loading Balance %* 60/40 55/45 65/35 80/20
As a reminder, failure was defined as a 6° horizontal tilt. The supports were on 12 ft centers and the ATR drops were 6 ft. Cable loading was estimated for category 5 cable weighing .021 lbs/ft with a cross-sectional area of .0492 square inches. This information should be beneficial when considering eccentric loading and center rail systems. *Defined as percentage of total cable load allowed on one side of the tray.
65
800-851-7415 ext. 366
Cent-R-Rail® • Aluminum
UNBALANCED LOADING - The Study
Aluminum Redi-Rail ™ Cable Tray
Important notice: The information herein has been carefully checked for accuracy and is believed to be correct and current. No warranty, either expressed or implied, is made as to either its applicability to or its compatibility with specific requirements of this information, nor for damages consequential to its use. All design characteristics, specifications, tolerances and similar information are subject to change without notice.
H13A Straight Sections/Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H16A and 17A Knockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H14A-H17A Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Covers for H14A-H17A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Support Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flex-Mount Splice Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low Voltage and Electrical Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.cooperbline.com
66
pg. pg. pg. pg. pg. pg. pg. pg. pg.
69 70 71 72 73 75 79 80 81
Redi-Rail™
Short Span
Intermediate Span
Advantage
B-Line Redi-Rail . . . Enough Said Redi-Rail Rung
Redi-Rail Flex Connectors
An “I”-Beam shaped rung provides a great strength-to-weight ratio. Patented fastener hole is designed to provide maximum grip for the fastener threads.
Allows adjustment both vertically (up to 15 degrees) and horizontally (up to 90 degrees). Listed as a UL grounding conductor. Holes provided for optional rung attachment.
Tray Sizes and Finishes Aluminum construction. Available in 3, 4, 5 and 6 inch fill depths and 6, 9, 12, 18, 24, 30 and 36 inch widths. Comes in ladder, ventilated and solid bottom options. Redi-Rail tray is tested to meet or exceed NEMA 12B load classification requirements (75 lbs./ft. on a 12 ft. span with a safety factor of 1.5).
Wire Fill Area Wire fill area free of splice hardware.
Redi-Rail Rung Fastener Specially designed and finished rung fastener. Rung pullout tested to over 3000 lbs. Vibration tested for your confidence.
Multi-Functional Pre-Punched Holes Act as holes for splice plate hardware: allow for field cutting to any length, no field-drilling necessary. Holes also allow rungs to be repositioned. Holes allow for easy attachment of accessory items requiring 1/4” hardware (or smaller).
Patent Information U.S. Patent D361982; 5,580,014 Canada 2,137,879; UK Patent 2,285,343 Other United States and foreign patents are pending.
Hanger Rod Bracket Attaches to any open hole at bottom of side rail. Bracket hardware inside tray is below cable fill area. Single-bolt attachment allows the tray to swivel vertically up to 45 degrees. Bracket tested for tray loads up to 115 lbs./ft.
Electrical Continuity of Connections
Sample Kit
Redi-Rail rung to side rail resistance test results. 0.000071 ohm (max. allowable per standard 0.00033 ohm) Tested per NEMA VE 1-1998 CSA C22.2 No. 126.1-98 For more information go to www.cooperbline.com/pdf/Flyers/ElectricalContinuity.pdf
H14AR06-12-12SK Call 800-851-7415 to request your sample kit.
67
800-851-7415 ext. 366
Redi-Rail™ • Aluminum
™
Redi-Rail™
Short Span
Intermediate Span
Loading Possibilities Power Cables Power cable creates the heaviest loading. The heaviest cable combination found was for large diameter cables (i.e. steel armor, 600V, 4 conductor 750 kcmil). The illustrations below show the maximum weight per foot for standard widths when the above cables are installed per the NEC.
36" Wide 140 lbs/ft
24" Wide 90 lbs/ft
30" Wide 115 lbs/ft
12" Wide 45 lbs/ft
18" Wide 70 lbs/ft
9" Wide 35 lbs/ft
6" Wide 23 lbs/ft
Data Cables The National Electrical Code allows for 50% fill of ventilated cable tray for control or signal wiring (Article 392-9(b)). This rule requires that all the individual cable cross-sectional areas added up may not exceed one half the cable tray area. The cable tray area is equal to the width times the load depth. In actual practice with data cables, however, the cable tray becomes completely full in reaching the "50% cable fill". See the picture below. The tray is completely full, but the sum of the cable areas is only 50% of the tray area, due to the empty spaces between the cables.
"50%" Fill Per NEC Cross Sectional Area Calculation
Data Cable Fill and Weight Chart Number of Category 5/5e/6 Cables and Calculated Cable Weight in Lbs/Ft Tray Depth in
6"
mm
Tray Width 12" 18"
9"
24"
30"
36"
Cables lbs/ft Cables lbs/ft Cables lbs/ft Cables lbs/ft Cables lbs/ft Cables lbs/ft Cables lbs/ft
2”
50
173
5
260
7
347
9
520
14
693
17
866
21
1040
27
3”
76
260
7
390
10
520
14
780
21
1040
26
1299
32
1559
41
4”
101
347
9
520
13
693
18
1040
27
1386
35
1733
43
2079
54
5”
127
433
12
650
17
866
23
1299
34
1733
43
2166
53
2599
68
6”
152
520
14
780
20
1040
27
1559
41
2079
52
2599
64
3119
81
This chart was based on 50% fill of 4 UTP Category 5, 5e, or 6 cables (O.D. = .21" .026 lbs/ft). In the above loading grid, the weight of the cables is not the issue. The volume capacity of the tray governs. For example, the worst case (6" load depth, 36" wide) has a total cable weight of 81 lbs/ft.
www.cooperbline.com
68
Redi-Rail™
Short Span
H13A Straight Sections Straight Section Part Numbering
Series H1
H13 A R 09 - 12 - 120
Height
Material
Construction
Bottom Type
3 = 3"
Aluminum
Redi-Rail
Ladder06 = 6" rung spacing 09 = 9" rung spacing
Overall Width (Width + 13/4”) 3"
Redi-Rail™ • Aluminum
Prefix Example:
2"
Width
Trough04 = Vented Bottom SB = Solid Bottom
• 2" cable fill depth. • 10 ft. straight sections.
Length
06 = 6" 09 = 9" 12 = 12" 18 = 18" 24 = 24"
120 = 10 ft.
Values are based on simple beam tests per VE 1 on 36" wide cable tray with rungs spaced on 12" centers. The published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the tray. These systems will support without collapse a 200 lb. concentrated load. B-Line Side Rail Series Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 8B
5
197
0.0007
CSA: N/A
6
137
0.0015
UL Cross-Sectional
7
101
0.003
Area: 0.40 in2
8
77
0.005
.875
H13A
2.00
2.83
.280 .725
Deflection Multiplier
Design Factors for Two Rails Area=0.57 in2 Sx=0.89
in3
Ix=1.29
in4
Span meters
Load kg/m
Deflection Multiplier
1.5
293
0.012
1.8
204
0.025
2.1
150
0.047
2.4
115
0.080
Design Factors for Two Rails Area=3.65 cm2 Sx=14.7 cm3 Ix=53.8 cm4
When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
H13A series Redi-Rail is an economical 2" fill depth aluminum cable tray system that is offered without traditional fittings. Horizontal directional changes are produced by using the Flex Mount Splice, 9A-R033, or the Universal Fitting, UR2A-(cable tray width) for a 3" smooth radius horizontal fitting. Vertical directional changes are produced by vertical adjustable splice plates, 9A-R023, or for up to a 15° vertical adjustment the flex mount splice, 9A-R033.
COVERS FOR H13A
Cover Attachment Hardware
• Covers are flat and notched for attachment hardware. • Order attachment hardware separately. • See page 69 for H14A through H17A covers.
• 4 Pack of 1 / 4 "-20 nuts and 1 / 4 "-20 x 5 / 8 " bolts.
Catalog No.
9ZN-1420NB
Aluminum Cover Part Numbering Prefix Example:
88 1 A 40 - 12 - 61
Cover Type
Detail
Material
Material Thickness
Tray Width
Item Description
88 = Solid
1 = Flat
Aluminum
40 = .040
06 = 6" 09 = 9" 12 = 12" 18 = 18" 24 = 24"
For Straight Section Cover:
Note: For ventilated covers add a “V” suffix to cover part number. Example: 881A40-12-61V
69
61 = 5.08 ft. For fitting covers: Insert suffix of fitting to be covered.
800-851-7415 ext. 366
Redi-Rail™
Short Span
Intermediate Span
Redi-Rail Knockout
B-Line Redi-Rail . . . Enough Said ™
Redi-Rail™ Knockout Part Numbering System A B C D E
Series H1 Height 6=6” 7=7” Material Aluminum Construction Redi-Rail™ Knockout Size 050KO = 1/2” Knockout (.875” O.D.) 075KO = 3/4” Knockout (1.125” O.D.) 100KO = 1” Knockout (1.375” O.D.) 125KO = 1 1/4” Knockout (1.750” O.D.) 150KO = 1 1/2” Knockout (2.000” O.D.) KO located on 9” centers
www.cooperbline.com
70
F Bottom Type
Ladder06=6” Rung Spacing 09=9” Rung Spacing 12=12” Rung Spacing Trough04=Vented Bottom SB=Solid Bottom
G Width
H Length
06=6” 18=18” 36=36” 09=9” 24=24” 12=12” 30=30” 144=12’ 120=10’
Redi-Rail™
Short Span
Intermediate Span
H14A, H15A, H16A, and H17A Straight Sections
Ladder Type
Solid Bottom
Redi-Rail™ • Aluminum
• Splices included with straight sections
Vented Bottom
Straight Section Part Numbering Prefix Example:
Series H1
H14 A R 09 - 12 - 120
Height
Material
Construction
Bottom Type
4 = 4" 5 = 5" 6 = 6" 7 = 7"
Aluminum
Redi-Rail
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
Rung Spacing
Width 06 = 6" 09 = 9" 12 = 12" 18 = 18" 24 = 24" 30 = 30" 36 = 36"
Trough04 = Vented Bottom SB = Solid Bottom
Width (Inside) Overall Width (Width + 21/16”)
Length x144 ➁
= 12 ft. 120 = 10 ft.
xPrimary
Length. Length.
➁Secondary
Values are based on simple beam tests per VE 1 on 36" wide cable tray with rungs spaced on 12" centers. The published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the tray. These systems will support without collapse a 200 lb. concentrated load. B-Line Side Rail Series Dimensions 1.02
H14A
3.84
3.00
.375 .855
B-Line Side Rail Series Dimensions 1.02
H15A
4.84
4.00
.375 .855
B-Line Side Rail Series Dimensions 1.02
H16A
5.84
5.00
.375 .855
B-Line Side Rail Series Dimensions 1.02
H17A
6.84
6.00
.375 .855
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
NEMA: 12B
6
224
0.0015
CSA: D1-3m
8
194
0.0047
UL Cross-Sectional
10
124
0.011
Area: 0.60 in2
12
86
0.024
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 12C
6
224
0.0015
CSA: D1-3m
8
224
0.0047
UL Cross-Sectional
10
147
0.011
Area: 0.60 in2
12
102
0.024
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
Deflection Multiplier
NEMA: 12C
6
224
0.0015
CSA: D1-3m
8
224
0.0047
UL Cross-Sectional
10
164
0.011
Area: 1.00 in2
12
114
0.024
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 12C
6
224
0.0015
CSA: D1-3m
8
224
0.0047
UL Cross-Sectional
10
144
0.011
Area: 1.00 in2
12
100
0.024
Deflection Multiplier
Design Factors for Two Rails Area=0.98 in2 Sx=0.93
in3
Ix=1.97
in4
Design Factors for Two Rails Area=1.06 in2 Sx=1.29 in3 Ix=3.44 in4
Design Factors for Two Rails Area=1.26 in2 Sx=1.75
in3
Ix=5.51
in4
Design Factors for Two Rails Area=1.41 in2 Sx=2.24 in3 Ix=8.19 in4
Span meters
Load kg/m
Deflection Multiplier
1.8
333
0.025
2.4
288
0.080
3.0
184
0.195
3.7
128
0.404
Span meters
Load kg/m
Deflection Multiplier
1.8
333
0.025
2.4
333
0.080
3.0
219
0.195
3.7
152
0.404
Span meters
Load kg/m
Deflection Multiplier
1.8
333
0.025
2.4
333
0.080
3.0
244
0.195
3.7
170
0.404
Span meters
Load kg/m
Deflection Multiplier
1.8
333
0.025
2.4
333
0.080
3.0
214
0.195
3.7
149
0.404
Design Factors for Two Rails Area=6.32 cm2 Sx=15.24 cm3 Ix=82.00 cm4
Design Factors for Two Rails Area=6.84 cm2 Sx=21.14 cm3 Ix=143.18 cm4
Design Factors for Two Rails Area=8.13 cm2 Sx=28.68 cm3 Ix=229.34 cm4
Design Factors for Two Rails Area=9.10 cm2 Sx=36.71 cm3 Ix=340.89 cm4
When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
71
800-851-7415 ext. 366
Redi-Rail™
Short Span
Intermediate Span
Fittings for H14A, H15A, H16A, and H17A 24" radius for all standard angles
Vertical Inside 12" radius for 45°, 60°, 90° angle 12" radius for 30° angle
Vertical Tee Bolt on Design Width1
Horizontal Tee
Width2
Horizontal Bend
Width1
• Furnished with splice plates.
Fittings Part Numbering Prefix Example:
Series H1
Height 4= 5= 6= 7=
4" 5" 6" 7"
Suffix
H14 A R - 09 - 30 HB 12
Material
Construction
Width
Angle
Aluminum
Redi-Rail
06 = 6" 09 = 9" 12 = 12" 18 = 18" 24 = 24" 30 = 30" 36 = 36"
30 = 30° 45 = 45° 60 = 60° 90 = 90°
*Angle not required on HT & HX
Type HB = Horizontal Bend *HT = Horizontal Tee *HX = Horizontal Cross VI = Vertical Inside Bend VO = Vertical Outside Bend VT = Vertical Tee
Radius 12 = 12" 24 = 24"
Horizontal Reducing / Expanding Tee or Cross Fittings Part Numbering Prefix Example:
Series H1
Height 4= 5= 6= 7=
4" 5" 6" 7"
Suffix
H14 A R - 09 - 12- HT 12
Material
Construction
Width1
Width2
Aluminum
Redi-Rail
06 = 6" 09 = 9" 12 = 12" 18 = 18" 24 = 24" 30 = 30" 36 = 36"
06 = 6" 09 = 9" 12 = 12" 18 = 18" 24 = 24" 30 = 30" 36 = 36"
Type HT = Horizontal Tee HX = Horizontal Cross
Radius 12 = 12" 24 = 24"
For aluminum 4", 5", 6", 7" vented or solid bottom add 04 or SB as shown below. Prefix
Prefix
H15AR04 - 24 - 90HB24
H15ARSB - 24 - 90HB24
Vented Bottom
www.cooperbline.com
Solid Bottom
72
Redi-Rail™
Short Span
Intermediate Span
Standard Splice Plates • Furnished in pairs with 1 / 4 " hardware. • UL Classified.
Tray Series
Catalog No.
H13A
9A-R003
H14A H15A
9A-R004 9A-R005
H16A
9A-R006
H17A
9A-R007
Offset Reducing Splice Plates
Flex-Mount Adjustable Splice Plates
• Furnished in pairs with 1 / 4 " hardware. • UL Classified.
• Furnished in pairs with 1 / 4 " hardware. • Horizontally adjustable to 90°. • Vertically adjustable to 15°. • UL Classified.
Right Reducer
Center Reducer
Step Down Splice Plates Left Reducer
Catalog No.
H15A to H14A H16A to H14A
9A-R045 9A-R046
H17A to H14A H16A to H15A
9A-R047 9A-R060
H17A to H15A H17A to H16A
9A-R061 9A-R062
Vertical Adjustable Splice Plates • Furnished in pairs with 1 / 4 " hardware. • UL Classified.
Tray Series
Catalog No.
H13A H14A H15A H16A H17A
9A-R023 9A-R024 9A-R025 9A-R026 9A-R027
Catalog No.
H13A
9A-R033
H14A H15A
9A-R034 9A-R035
H16A
9A-R036
H17A
9A-R037
Tray to Box Splice Plates
• Furnished in pairs with 1 / 4 " hardware. • UL Classified.
Tray Series
Tray Series
Tray Series
Catalog No.
H13A H14A
9A-R063-†r 9A-R064-†r
H15A H16A H17A
9A-R065-†r 9A-R066-†r 9A-R067-†r
r = reduction † Specify L = left reducer C = center reducer R = right reducer
Expansion Splice Plates • Furnished in pairs with 1 / 4 " hardware. • Bonding Jumper required.
Tray Series
Catalog No.
H13A H14A H15A H16A H17A
9A-R013 9A-R014 9A-R015 9A-R016 9A-R017
73
• Furnished in pairs with 1 / 4 " hardware. • UL Classified.
Tray Series
Catalog No.
H13A H14A
9A-R053 9A-R054
H15A H16A H17A
9A-R055 9A-R056 9A-R057
Reversing Splice Plates • Furnished in pairs with 1 / 4 " hardware. • UL Classified.
Tray Series
Catalog No.
H14A H15A H16A H17A
9A-R964 9A-R965 9A-R966 9A-R967
800-851-7415 ext. 366
Redi-Rail™ • Aluminum
Accessories
Redi-Rail™
Short Span
Intermediate Span
Accessories Bonding Jumper • Furnished with 1 / 4 " hardware. • UL Classified.
Conduit to Tray Adaptors
Conduit to Tray Adaptors • Mounting hardware NOT included.
Conduit Size
Conduit Size in 1/2, 3/4
Catalog No.
mm
Ampacity
Catalog No.
1, 11/4
15, 20 25, 32
1200
99-30
11/2, 2
40, 50
Hanger Rod Bracket • Furnished as pair of studded clamps with 1 / 4 " serrated flanged lock nuts. • Loading is 1,000 lbs. (4.45kN) , per pair safety factor 3. • Position ATR 3" wider than cable tray.
Support ATR Size 3/8" 1/2"
9(*)-1158-1/2, 3/4 9(*)-1158-1, 11/4 9(*)-1158-11/2, 2
1/2 3/4
1 11/4
21/2, 3 65, 80 9(*)-1158-21/2, 3 31/2, 4 90, 100 9(*)-1158-31/2, 4
Catalog No. BL1400 BL1410 BL1420 BL1430
Drop-Out
(*) Insert ZN or G
Redi-Rail™ Clamp/Guide • Features a no-twist design. • Has four times the strength of the traditional design. • Each side is labeled to ensure proper installation. • Designed for 1 / 4 " hardware. • Furnished in pairs with or without hardware.
• Provides 4 inch radius. • Holes provided to secure cables.
† = tray width
Catalog No.
9A-R104-†
Blind End • Furnished as one plate with 1 / 4 " hardware.
Catalog No. 9(*)-R238 9(*)-R250
1.5" Patent No. RE35479
Catalog No.
(*) Insert ZN or SS
9ZN-1204 (without hardware) 9ZN-1204NB (with hardware)
Frame Type Box Connector • Furnished with 1 / 4 " hardware for tray connection.
† = tray width
Support Bracket • Designed for center hung or trapeze supports. • Load capacity is 600 lbs. (2.67kN) , safety factor 3. • All components are zinc plated.
Tray Series
Catalog No.
H13A H14A H15A H16A H17A
9A-R073-† 9A-R074-† 9A-R075-† 9A-R076-† 9A-R077-† † = tray width
www.cooperbline.com
Catalog No. Center Hung Wall or Trapeze Mount 9ZN-5106 9ZN-5109 9ZN-5112 9ZN-5118 9ZN-5124
9ZN-5106-WB 9ZN-5109-WB 9ZN-5112-WB 9ZN-5118-WB 9ZN-5124-WB
74
For Tray Width in
mm
6 9 12 18 24
152 226 305 452 609
Patent No. 5,100,086
Tray Series
Catalog No.
H13A H14A H15A H16A H17A
9A-R083-† 9A-R084-† 9A-R085-† 9A-R086-† 9A-R087-†
Redi-Rail™
Short Span
Intermediate Span
Accessories • Attaches to Redi-Rail in over 20 positions. • EIA/TIA panel mounting holes - both sides. • Mounting holes for NEMA outlet/junction boxes. • Zinc plated steel. • Includes mounting screws. • Inside flange A application bracket must match side rail height. • See page 82 for Voice/Data/Video and Power Options.
5.125"
9ZN-MB1-4 mounting bracket shown.
Outside Side Rail Flange Application
Catalog No.
Inside Flange Application
Outside Flange Application
in
mm
9ZN-MB1-4 9ZN-MB1-5
4" for H14AR 5" for H15AR
4" or 5" as desired 4" or 5" as desired
35/8 45/8
92 117
A
9ZN-MB1-4 mounting bracket shown with patch panels.
See www.cooperbline.com/product/cabletray/bracket.asp for mounting options.
Low Voltage Adapter • Mounting for low voltage wall plates. • Snaps into mounting bracket 9ZN-MB1-4 or 9ZN-MB1-5. • Zinc plated steel. • #6 - 32 U-nuts included. • See page 80 for Voice/Data/Video and Power Options.
Catalog No.
9ZN-MB1-4 mounting bracket shown with 4" electrical box.
∅ 1.344 1.250" 2.938" 2.030"
3.500" 9ZN-LV1-1
9ZN-LV1-1 (cutout on front) 9ZN-LV1A-1 (cutout on bottom)
3.28" REF
9ZN-LV1-1 shown.
3.500" 5.125" 9ZN-LV1A-1
Under Rung Fastener Attachment • • • •
Supports electrical fixtures from bottom of rung or siderails. Wing nut included. Various 1 / 4 ”-20 stud lengths available. Static Load Capacity: 75 Lbs. (34kg) .
Catalog No. BAX-4-16
Stud Length 5/8” (16mm)
BAX-4-16-24
11/2” (38mm)
BAX-4-16-32 BAX-4-16-48
2” (51mm) 3” (76mm)
75
800-851-7415 ext. 366
Redi-Rail™ • Aluminum
Inside Side Rail Flange Application
Mounting Bracket
Redi-Rail™
Short Span
Intermediate Span
Rungs Out Board Rungs • Formed aluminum rung with attachment screw. • Field installs as required. • Torque rung fasteners to 18 ft/lbs. • See page 82 for Voice/Data/Video and Power Options.
Fill Depth 'H'
For Tray Width 'W'
Catalog No.
in
mm
in
mm
9A-SR0406
4
101
6
152
9A-SR0409 9A-SR0506
4 5
101 127
9 6
226 152
9A-SR0509
5
127
9
226
Add-A-Rung Kit • Kit allows an additional rung to be added to a desired location throughout the tray system. • Pre-cut rung sections supplied. • Attachment hardware is included. • Torque rung fasteners to 18 ft/lbs.
H W
Tray Width in
mm
Catalog No.
6 9
152 226
9A-R06RK 9A-R09RK
12 18
305 452
9A-R12RK 9A-R18RK
24 30 36
609 762 914
9A-R24RK 9A-R30RK 9A-R36RK
End Rung Kit for Solid Bottom • Special rung captures solid bottom plate when required at field cuts. • Pre-cut rung sections supplied. • Attachment hardware is included.
Tray Width in
mm
Catalog No.
6 9 12 18 24 30 36
152 226 305 452 609 762 914
9A-R06SBERK 9A-R09SBERK 9A-R12SBERK 9A-R18SBERK 9A-R24SBERK 9A-R30SBERK 9A-R36SBERK
www.cooperbline.com
76
Redi-Rail™
Short Span
Intermediate Span
Barriers Barrier Strip Clip Provides attachment to Redi-Rail rung. Allows for installed barrier adjustment. Asymmetrical clip provides a wide range for screw location. Barriers strip clips and hardware are included with all barriers.
Redi-Rail™ • Aluminum
• • • •
.563”
Catalog No.
9A-R002 .390” Barrier Flange
.484”
Barrier Flange
.081”
Rung
Rung
Siderail Flange Maximum Distance Long leg adjacent to rung fully extended
Screw slot for sheet metal screw
Siderail Flange Minimum Distance Short leg adjacent to rung fully extended
Straight Section
Horizontal Bend
• Furnished with mounting hardware and splice. • Standard lengths are 144" (12 ft) & 120" (10 ft) .
• Furnished with mounting hardware and splice. • Standard length is 72" (6 ft) . • Flexible to fit desired angles.
H
H
Tray Series Catalog No. H13A H14A H15A H16A H17A
72AR-120 73AR-Length 74AR-Length 75AR-Length 76AR-Length
Tray Series Catalog No.
H in
mm
2 3 4 5 6
51 76 101 127 152
H13A H14A H15A H16A H17A
Vertical Bend
72AR-90HBFL 73AR-90HBFL 74AR-90HBFL 75AR-90HBFL 76AR-90HBFL
H in
mm
2 3 4 5 6
51 76 101 127 152
Inside Bend (VI)
• Furnished with mounting hardware and splice. 12" radius for 30° angle
12" radius for 45°, 60°, 90° angle
H
24" radius for all standard angles
H
H
Tray Catalog No. Series Inside Bend Outside Bend H14A H15A H16A H17A
73AR-(**)VI(†) 74AR-(**)VI(†) 75AR-(**)VI(†) 76AR-(**)VI(†)
73AR-(**)VO(†) 74AR-(**)VO(†) 75AR-(**)VO(†) 76AR-(**)VO(†)
H in
mm
3 4 5 6
76 101 127 152
H
Outside Bend (VO)
(**) Insert 30°, 45°, 60°, 90° for angles (†) Insert 12, 24 for radius
77
800-851-7415 ext. 366
Redi-Rail™
Short Span
Intermediate Span
Covers for H14A, H15A, H16A and H17A • Corners notched for splice hardware clearance. • Slots provided for easy attachment (hardware NOT included). • Over-lap seam designed - fittings only.
Aluminum Cover Part Numbering Prefix Example:
88 7 A 40 - 12 - 72
Cover Type
Detail
Material
Material Thickness
88 = Solid
7 = Flanged
Aluminum
40 = .040
Tray Width
Note: For ventilated covers add a “V” suffix to cover part number. Example: 887A40-12-72V
06 = 6" 09 = 9" 12 = 12" 18 = 18" 24 = 24" 30 = 30" 36 = 36"
Item Description For Straight Section Cover:
144 = 12 ft. 120 = 10 ft. 72 = 6 ft. 60 = 5 ft. For fitting covers: Insert suffix of fitting to be covered. See example below.
Examples of Catalog Numbers for Fitting Covers: Horizontal Bend Cover Prefix Suffix 88 7 A 40 - 18 - 90 HB 24 Radius Fitting Angle Width Material Thickness Material Detail Cover Type
Vertical Inside and Outside Bend Cover Prefix Suffix 88 7 A 40 - 24 - 90 V* 24 - 4 Side Rail Height Radius Fitting Angle Width Material Thickness Material Detail Cover Type
Horizontal Expanding Cross Cover Prefix Suffix 88 7 A 40 - 12 - 24 - HX 24 Radius Fitting Width2 Width1 Material Thickness Material Detail Cover Type
* Insert I for Inside or O for Outside Bend
Standard Cover Clamp
Heavy Duty Cover Clamp
• Setscrew included. • Sold each.
• For heavy duty application. • Sold per piece.
Tray Type Aluminum
Side Rail Height Catalog No. All Sizes
9ZN-9012 9A-9012
Tray Series
Catalog No.
H14A H15A H16A H17A
9A-†-R044 9A-†-R054 9A-†-R064 9A-†-R074
† = tray width
www.cooperbline.com
78
Cover Attachment Hardware • 4 Pack of 1 / 4 "-20 nuts 1 / 4 "-20x 5 / 8 " bolts.
Catalog No.
9ZN-1420NB
Redi-Rail™
Short Span
Intermediate Span
Accessories
RAIL-RISER™
Rail-Riser ™ for Redi-Rail ™ Cable Support Systems
Catalog No.
9ZN-RR2RR
UNIVERSAL FITTING
Universal Fitting • • • • • • • •
Redi-Rail™ • Aluminum
• Provides expansion capabilities for existing systems where additional cable fill area is required. • Increases fill-depth by two inches. • Recommended installation frequency: two required every three feet, depending on cable density. • Provides controlled cable exit locations. • Does not interfere with cable fill area. • Comes complete with necessary mounting hardware. • Zinc plated. • Sold separately. • Patent Pending.
Aluminum construction. 3" smooth radius. UL Classified. Shipped as a 90° horizontal bend. Field modify to create a tee or cross. Includes four pairs of splice plates. Accommodates Rail-Riser™. Patent Pending.
Tray Width
Catalog No. Punched Solid
6" 9"
UR(*)A-06 UR(*)A-09
UR(*)ASB-06 UR(*)ASB-09
12" 18"
UR(*)A-12 UR(*)A-18
UR(*)ASB-12 UR(*)ASB-18
24"
UR(*)A-24
UR(*)ASB-24
Punched Bottom
Solid Bottom
(*) Insert 2", 3", 4", 5", 6" for loading depth (ie UR2A-06 to use on a 3” cable tray)
Covers: Cover catalog number is UA-†-C where †=tray width. Example: UA-12-C is a cover for UR4A-12 universal fitting shipped with attachment screws.
Corner Post • • • •
Universal Fitting Shown as a Reducing Tee
For Universal Fitting
Use to create reducing fittings. Furnished with hardware. 3" inside radius. UL Classified.
Loading Depth
Catalog No.
2" 3" 4" 5" 6"
U2A-CP U3A-CP U4A-CP U5A-CP U6A-CP
79
800-851-7415 ext. 366
Redi-Rail™
Short Span
Intermediate Span
Support Options Hanger Rod Bracket • 1 / 4 " ATR through Redi-Rail™ holes on top flange. Hex nut on top and bottom. • Loading is 800 lbs. (3.56kN) , per pair, safety factor 3.
• Studded bracket bolts to Redi-Rail™ holes. • For 3 / 8 " ATR. • Loading is 1,000 lbs. (4.45kN) , per pair, safety factor 3. • See page 72 for size options.
Catalog No.
9ZN-R238
• Position ATR 3" wider than cable tray width.
Center Hung or Trapeze • Designed for 1 / 2 " and 3 / 8 " ATR. • Loading is 600 lbs. (2.67kN) , safety factor 3. • Zinc plated.
For Tray Width Catalog No.
in
mm
9ZN-5106 9ZN-5109
6 9
152 226
9ZN-5112 9ZN-5118 9ZN-5124
12 18 24
305 452 609
Pre-assembled hanger system that can be used as a trapeze or a center hung support.
Wall-Mount Assembly • Pre-assembled wall-mount hanger system.
For Tray Width Catalog No.
in
mm
9ZN-5106-WB 9ZN-5109-WB 9ZN-5112-WB 9ZN-5118-WB 9ZN-5124-WB
6 9 12 18 24
152 226 305 452 609
www.cooperbline.com
80
Redi-Rail™
Short Span
Intermediate Span
Flex-Mount Splice Plates How to miter cut Redi-Rail™ cable tray for use with flex-mount splice plates.
Cut location
Count over number of holes specified in chart
Count over number of holes specified in chart
Redi-Rail™ • Aluminum
H15AR09-12-144 shown at 90°
Cut location
H15AR09-12-144 Straight Section shown with required side rail removed to form 90° fitting. Example: For a 12" wide 90° bend, the cuts must be made through the eighth hole from the end. • • • • • • • • •
Mark desired hole/cut locations per chart. Remove any rungs (if necessary) affected by cuts. Cut side rails through center of required holes per chart. Mount outside flex-mount splice plate with provided hardware and bend Redi-Rail sections to desired angle. Form inside flex-mount splice plate to fit contour of inner rails and bolt into place. Reinstall (if necessary) appropriate rungs. Torque rung fasteners to 18 ft/lbs. If Splice Rung Kit (see below) is required, order separately. Recommend adding one to the value in the chart if the first hole is less than 3 / 8 " from the end of tray.
Tray Width
Number of Holes for Desired Angle 30° 45° 60° 90°
Angle Adjustment Allowed
6 9
1 2
2 2
2 3
4 6
± 14.5 ± 9.7
12 18
2 3
3 5
4 7
8 11
± 7.3 ± 4.9
24 30 36
4 5 6
6 8 10
9 11 13
15 19 23
± 3.6 ± 2.9 ± 2.4
Flex-Mount Splice Rung Kit • Kit allows a support rung to be added to flex-mount splice plates so that cables may be supported through a bend. • The support rung is available in three lengths and should be ordered based upon tray width. • The rung length is sized so that it will fit a maximum tray width when flex-mount splices are used to make a bend up to 90°. • Once the flex-mount splices are installed in the cable tray system, the distance between the splice mounting surfaces should be measured. Cut support rung to the measured distance and install using the hardware included. • Torque rung fasteners to 18 ft/lbs.
For Tray Width
Catalog No.
Actual Rung Length
Up to 12" 18" & 24" 30" & 36"
9A-RFM-12RK 9A-RFM-24RK 9A-RFM-36RK
20" 37" 54"
Example: Flex connectors are installed on an 18" wide tray with approximately a 45° bend. The correct support rung kit is 9A-RFW-24RK. The tray width is 24" or less and the angle is less than 90°.
81
800-851-7415 ext. 366
Redi-Rail™
Short Span
Intermediate Span
Low Voltage and Electrical Options
V O I C E / D ATA / V I D E O O P T I O N S
1/2"
ATR
9ZN-5112 as center hung
H14AR09-12-144
Single patch panel mounted in center of 9ZN-MB1-4 9A-SR0406 Out-Board Rung
9ZN-LV1-1 with low voltage adapter and wall plate
9ZN-LV1-1 with low voltage adapter
POWER OPTIONS 3/8"
ATR
9ZN-MB1-4
9ZN-R238 Electrical Box BL1400
H14A09-12-144
www.cooperbline.com
82
Aluminum Cable Tray Cable Tray
• • •
Most Efficient Structural Shape I-Beam “Copper-free” 6063-T6 Aluminum Alloy Capable of Supporting a 200 lb. Concentrated Load
Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg. Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg. Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg.
83
84 93 94 103 105
800-851-7415 ext. 366
Series 2,3&4 Aluminum
Short Span
Short Intermediate Span Span
Long Span
Straight Sections 3" NEMA VE 1 Loading Depth 4" Side Rail Height
Straight Section Part Numbering Prefix Example: 24 A
Series
Material A = Aluminum
24 34
09 - 24 - 144
*Type
Width
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
Trough6" thru 36" wide VT = Vented Trough ST = Solid Trough
06 09 12 18 24 30 36
= = = = = = =
Length x
6" 9" 12" 18" 24" 30" 36"
➁
x ➁
Width (Inside)
*Additional rung options available, see engineering catalog CT-02 or visit www.cooperbline.com
Ventilated Trough
www.cooperbline.com
84
12 10 20 12
Solid Trough
ft. ft. ft. ft..
Length. Length.
➁Secondary
Overall Width (Width + 11/2")
Ladder Type
= = = =
xPrimary
Rung Spacing
(Specify Rung Spacing)
144 120 240 144
24 34
Series 2,3&4 Aluminum
Short Span
Short Intermediate Span Span
Long Span
3" NEMA VE 1 Loading Depth 4" Side Rail Height
Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (.89 kN) concentrated load over and above published loads. Published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (.89 kN) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
B-Line Series
24
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
1.75
NEMA: 16A, 12C CSA: D1-3m
6 8 10 12 14 16
487* 284 181 126 93 71
3.05
4.12
UL Cross-Sectional Area:1.00 in2
Deflection Multiplier 0.001 0.003 0.008 0.016 0.030 0.052
Design Factors Span for Two Rails meters Area=1.05 in2 Sx=1.34 in3 Ix=2.85 in4
1.8 2.4 3.0 3.7 4.3 4.9
Load kg/m 725* 422 270 187 138 105
Deflection Multiplier 0.017 0.055 0.135 0.279 0.518 0.883
Cable Tray • Aluminum
Straight Sections
Design Factors for Two Rails Area=6.77 cm2 Sx=21.96 cm3 Ix=118.63 cm4
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus. * When using 18" rung spacing, load capacity is limited to 394 lbs/ft (586.27 kg/m) for 30" tray width and 325 lbs/ft (483.6 kg/m) for 36" tray width.
B-Line Series
34
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
1.75
NEMA: 20B, 16C CSA: E-6m
10 12 14 16 18 20
320 222 163 125 99 80
4.20
3.08
UL Cross-Sectional Area: 1.50 in2
Deflection Multiplier 0.005 0.009 0.017 0.030 0.047 0.072
Design Factors Span for Two Rails meters Area=1.82 in2 Sx=2.10 in3 Ix=4.98 in4
3.0 3.7 4.3 4.9 5.5 6.1
Load kg/m 476 331 243 186 147 119
Deflection Multiplier 0.077 0.160 0.296 0.505 0.810 1.234
Design Factors for Two Rails Area=11.74 cm2 Sx=34.41 cm3 Ix=207.28 cm4
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
85
800-851-7415 ext. 366
Series 2,3&4 Aluminum
Intermediate Span
Long Span
Short Span
Straight Sections 4" NEMA VE 1 Loading Depth 5" Side Rail Height
Straight Section Part Numbering Prefix Example: 25 A 09 - 24 - 144
Series
Material A = Aluminum
25 35
*Type
Width
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
Trough6" thru 36" wide VT = Vented Trough ST = Solid Trough
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
x ➁
Overall Width (Width + 11/2")
*Additional rung options available, see engineering catalog CT-02 or visit www.cooperbline.com
Ventilated Trough
www.cooperbline.com
86
Solid Trough
12 20 20 12
ft. ft. ft. ft.
Length. Length.
➁Secondary
Width (Inside)
Ladder Type
= = = =
xPrimary
Rung Spacing
(Specify Rung Spacing)
144 240 240 144
25 35
Series 2,3&4 Aluminum
Intermediate Span
Long Span
4" NEMA VE 1 Loading Depth 5" Side Rail Height Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (.89 kN) concentrated load over and above published loads. Published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (.89 kN) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
B-Line Series
Side Rail Dimensions 1.75
25
3.93
5.00
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
NEMA: 20A, 12C CSA: D1-6m
10 12 14 16 18 20
200 139 102 78 62 50
0.0049 0.010 0.019 0.032 0.051 0.078
UL Cross-Sectional Area: 1.00 in2
Design Factors Span for Two Rails meters Area=1.24 in2 Sx=1.80 in3 Ix=4.62 in4
3.0 3.7 4.3 4.9 5.5 6.1
Load kg/m 298 207 152 116 92 74
Deflection Multiplier 0.083 0.172 0.319 0.545 0.873 1.330
Design Factors for Two Rails Area=8.00 cm2 Sx=29.50 cm3 Ix=192.30 cm4
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
B-Line Series
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
1.75
NEMA: 20B, 16C CSA: E-3m
10 12 14 16 18 20
310 215 158 121 96 77
0.0035 0.0073 0.014 0.023 0.037 0.057
35 5.06
3.96
UL Cross-Sectional Area: 1.50 in2
Design Factors Span for Two Rails meters Area=1.67 in2 Sx=2.35 in3 Ix=6.37 in4
3.0 3.7 4.3 4.9 5.5 6.1
Load kg/m 461 320 235 180 142 115
Deflection Multiplier 0.060 0.125 0.232 0.395 0.633 0.965
Design Factors for Two Rails Area=10.77 cm2 Sx=38.51 cm3 Ix=265.14 cm4
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
87
800-851-7415 ext. 366
Cable Tray • Aluminum
Short Span
Straight Sections
Series 2,3&4 Aluminum
Short Intermediate Span Span
Long Span
Straight Sections 5" NEMA VE 1 Loading Depth 6" Side Rail Height
Straight Section Part Numbering Prefix Example: 26 A 09 - 24 - 144
Series
Material A = Aluminum
26 36
*Type
Width
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
46 Trough6" thru 36" wide VT = Vented Trough ST = Solid Trough
H46
06 09 12 18 24 30 36
= = = = = = =
Length x
6" 9" 12" 18" 24" 30" 36"
➁
x ➁
x ➁
x ➁
144 240 240 144 240 288 240 300
= = = = = = = =
12 20 20 12 20 24 20 25
ft. ft. ft. ft. ft. ft. ft. ft.
26 36 46 H46
Rung Spacing
xPrimary
Width (Inside) Overall Width (Width + 11/2")
*Additional rung options available, see engineering catalog CT-02 or visit www.cooperbline.com
Ladder Type
Ventilated Trough
(Specify Rung Spacing)
www.cooperbline.com
Length. Length.
➁Secondary
88
Solid Trough
Ex. Long Span
Series 2,3&4 Aluminum
Short Intermediate Span Span
Long Span
Ex. Long Span
5" NEMA VE 1 Loading Depth 6" Side Rail Height Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support, without collapse, a 200 lb. (.89 kN) concentrated load over and above published loads. Published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (.89 kN) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
B-Line Series
26
B-Line Series
36
B-Line Series
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
2.00
NEMA: 20A, 16B CSA: D1-6m
10 12 14 16 18 20
204 142 104 80 63 51
0.0028 0.006 0.011 0.019 0.030 0.045
5.04
6.12
UL Cross-Sectional Area: 1.00 in2
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
2.00
NEMA: 20B, 16C CSA: E-6m
12 14 16 18 20 22
233 171 131 104 84 69
0.0043 0.008 0.014 0.022 0.033 0.049
5.06
UL Cross-Sectional Area: 1.50 in2
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
2.00
NEMA: 20C CSA: N/A
14 16 18 20 22 24
210 161 127 103 85 72
0.0071 0.012 0.019 0.030 0.043 0.061
6.17
46
5.08
6.19
UL Cross-Sectional Area: 1.50 in2
Design Factors Span for Two Rails meters Area=1.41 in2 Sx=2.53 in3 Ix=7.915 in4
3.0 3.7 4.3 4.9 5.5 6.1
Design Factors Span for Two Rails meters Area=1.81 in2 Sx=3.36 in3 Ix=10.85 in4
3.7 4.3 4.9 5.5 6.1 6.7
Design Factors Span for Two Rails meters Area=2.06 in2 Sx=3.59 in3 Ix=12.18 in4
4.3 4.9 5.5 6.1 6.7 7.3
Load kg/m 304 211 155 119 94 76
Load kg/m 347 255 195 154 125 103
Load kg/m 313 239 189 153 127 106
Deflection Multiplier 0.049 0.101 0.186 0.318 0.509 0.776
Deflection Multiplier 0.073 0.136 0.232 0.372 0.566 0.829
Deflection Multiplier 0.121 0.207 0.331 0.505 0.739 1.046
Design Factors for Two Rails Area=9.10 cm2 Sx=41.46 cm3 Ix=329.45 cm4
Design Factors for Two Rails Area=11.68 cm2 Sx=55.06 cm3 Ix=451.61 cm4
Design Factors for Two Rails Area=13.29 cm2 Sx=58.83 cm3 Ix=506.97 cm4
Mid-Span splice included B-Line Series
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
2.00
NEMA: 20C+ CSA: N/A
16 18 20 22 24 25
261 206 167 138 116 88
0.0085 0.014 0.021 0.030 0.043 0.051
H46 6.24
5.09
UL Cross-Sectional Area: 2.00 in2
Design Factors Span for Two Rails meters Area=2.95 in2 Sx=5.33 in3 Ix=17.30 in4
4.9 5.5 6.1 6.7 7.3 7.6
Load kg/m 388 307 248 205 173 131
Deflection Multiplier 0.145 0.233 0.355 0.520 0.737 0.867
Design Factors for Two Rails Area=19.03 cm2 Sx=87.34 cm3 Ix=720.08 cm4
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
89
800-851-7415 ext. 366
Cable Tray • Aluminum
Straight Sections
Series 2,3&4 Aluminum
Short Intermediate Span Span
Long Span
Straight Sections 6" NEMA VE 1 Loading Depth 7" Side Rail Height
Straight Section Part Numbering Prefix Example: 37 A
Series
Material A = Aluminum
37 47
09 - 24 - 240
*Type
Width
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
H47 Trough6" thru 36" wide VT = Vented Trough ST = Solid Trough
06 09 12 18 24 30 36
= = = = = = =
Length x
6" 9" 12" 18" 24" 30" 36"
➁
x ➁
x ➁
xPrimary
Width (Inside) Overall Width (Width + 11/2")
*Additional rung options available, see engineering catalog CT-02 or visit www.cooperbline.com
Ladder Type
Ventilated Trough
www.cooperbline.com
90
= = = = = =
20 12 20 24 20 25
Solid Trough
ft. ft. ft. ft. ft. ft.
37 47 H47
Length. Length.
➁Secondary
Rung Spacing
(Specify Rung Spacing)
240 144 240 288 240 300
Ex. Long Span
Series 2,3&4 Aluminum
Short Intermediate Span Span
Long Span
Ex. Long Span
6" NEMA VE 1 Loading Depth 7" Side Rail Height Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (297.6 kg) concentrated load over and above published loads. Published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (279.6 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
B-Line Series
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
2.00
NEMA: 20B, 16C CSA: N/A
12 14 16 18 20 22
222 163 125 99 80 66
0.0035 0.0064 0.011 0.017 0.027 0.039
37
6.05
7.14
UL Cross-Sectional Area: 1.50 in2
Design Factors Span for Two Rails meters Area=1.81 in2 Sx=3.77 in3 Ix=13.50 in4
3.7 4.3 4.9 5.5 6.1 6.7
Load kg/m
Deflection Multiplier
331 243 186 147 119 98
0.059 0.109 0.186 0.299 0.455 0.666
Design Factors for Two Rails Area=11.68 cm2 Sx=61.78 cm3 Ix=561.91 cm4
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
B-Line Series
47
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
2.00
NEMA: 20C CSA: N/A
14 16 18 20 22 24
204 156 123 100 83 69
0.0048 0.0082 0.0132 0.0201 0.0295 0.0418
6.13
7.24
UL Cross-Sectional Area: 2.00 in^2
Design Factors Span for Two Rails meters Area=2.38 in2 Sx=4.94 in3 Ix=17.88 in4
4.3 4.9 5.5 6.1 6.7 7.3
Load kg/m
Deflection Multiplier
304 233 184 149 123 103
0.083 0.141 0.225 0.344 0.503 0.713
Design Factors for Two Rails Area=15.35 cm2 Sx=80.95 cm3 Ix=744.22 cm4
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
Mid-Span splice included B-Line Series
H47
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
2.00
NEMA: 20C+ CSA: N/A
16 18 20 22 24 25
233 184 149 123 103 95
0.0064 0.010 0.016 0.023 0.033 0.038
7.24
6.09
UL Cross-Sectional Area: 2.00 in2
Design Factors Span for Two Rails meters Area=3.04 in2 Sx=6.10 in3 Ix=22.91 in4
4.9 5.5 6.1 6.7 7.3 7.6
Load kg/m
Deflection Multiplier
346 274 222 183 154 142
0.110 0.176 0.268 0.393 0.556 0.655
Design Factors for Two Rails Area=19.61 cm2 Sx=99.96 cm3 Ix=953.59 cm4
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
91
800-851-7415 ext. 366
Cable Tray • Aluminum
Straight Sections
Aluminum Cable Tray
Intermediate Span
Long Span
Ex. Long Span
Straight Sections 57A
Ladder Type Aluminum Cable Tray Aluminum Alloy 6063-T6 Loading Depth = 6.23 12 to 36 inch widths Primary section length 360" (30 ft.) CSA Tested
Mid-Span splice included
Load Chart for 57A B-Line Series
57
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
2.00
NEMA: 20C+ CSA: N/A
20 22 24 26 28 30
232 192 161 100 86 75
6.23
7.40
UL Cross-Sectional Area: 2.00 in2
Deflection Multiplier 0.011 0.016 0.023 0.031 0.042 0.055
Design Factors for Two Rails Area=4.22 in2 Sx=7.73 in3 Ix=32.86 in4
Span meters
Load kg/m
Deflection Multiplier
6.1 6.7 7.3 7.9 8.5 9.1
345 285 240 149 128 112
0.187 0.274 0.388 0.534 0.718 0.947
Design Factors for Two Rails Area=27.23 cm2 Sx=126.67 cm3 Ix=1367.74 cm4
S8A Ladder Type Aluminum Cable Tray Aluminum Alloy 6063-T6 Loading Depth = 6.175 B24 Aluminum Strut Rungs 12 to 36 inch widths Primary section length 360" (30 ft.) CSA Tested
* Alternated rung unless indicated.
Load Chart for S8A B-Line Series
Side Rail Dimensions 3.00
S8A
8.00
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20C+ CSA: N/A
20 22 24 26 28 30
389 322 270 230 199 173
UL Cross-Sectional Area: 2.00 in2
www.cooperbline.com
Deflection Multiplier 0.007 0.010 0.013 0.019 0.025 0.033
Design Factors for Two Rails Area=5.50 in2 Sx=15.39 in3 Ix=55.35 in4
92
Span meters
Load kg/m
Deflection Multiplier
6.1 6.7 7.3 7.9 8.5 9.1
579 479 402 343 296 257
0.111 0.163 0.230 0.317 0.427 0.562
Design Factors for Two Rails Area=35.48 cm2 Sx=252.20 cm3 Ix=2303.84 cm4
Aluminum Cable Tray
Intermediate Span
Long Span
Ex. Long Span
Cable Tray • Aluminum
Series 2,3,4,&5 Fittings
Fittings engineered with 3” tangents for splicing integrity.
Fittings Part Numbering Prefix Example: 4 A - 24 - 90 HB 24
Side Rail Height 4 5 6 7
= = = =
4" 5" 6" 7"
(101) (127) (152) (178)
Material A= Aluminum
Width 06 = 09 = 12 = 18 = 24 = 30 = 36 =
6" (152) 9" (228) 12" (305) 18" (457) 24" (609) 30" (762) 36" (914)
Angle 30 45 60 90
= = = =
30° 45° 60° 90°
(9" rung spacing is standard)
Type HB HT HX VI VO VT VTU HYR HYL CSF
= Horizontal Bend = Horizontal Tee = Horizontal Cross = Vertical Inside Bend = Vertical Outside Bend = Vertical Tee = Vertical Tee, Up = Horizontal Wye, Right = Horizontal Wye, Left = Cable Support Fitting
Radius 12 = 12" (305) 24 = 24" (609) 36 = 36" (914) 48 = 48" (1219)
Note: Horizontal crosses and tees 30" or wider, with a radius of 36" or larger, will be of two-piece construction.
For ventilated trough or solid trough add VT or ST as shown below: Available 6" thru 36" Prefix
Prefix
4AVT - 24 - 90HB24
4AST - 24 - 90HB24
Vented Trough
Solid Trough
93
800-851-7415 ext. 366
Series 2,3&4 Aluminum
Intermediate Span
Short Span
Accessories Wedge Lock Splice Plates (Excluding H46,H47 & 57 Series) • Standard 4-hole pattern (except 9A-1007) • Furnished in pairs, with hardware • One pair including hardware provided with each section • Boxed in pairs with hardware • For field installation drill 13/32" hole
Catalog No. 9A-1004 9A-1005 9A-1006 9A-1007
mm
4 5 6 7
101 127 152 178
Expansion Splice Plates
H46A and H47A, 57A Mid-Span Splice
• Expansion plates allow for one inch expansion or contraction of the cable tray, or where expansion joints occur in the supporting structure • Furnished in pairs with hardware • Bonding Jumpers are required Order Separately
• Standard for H46A, H47A and 57A straight sections • Six bolt design 1/2" Stainless Steel Type 316 hardware standard • Available on ladder bottoms only • 09 and 12" rung spacing
Height in.
Long Span
Catalog No.
Tray Series
Catalog No.
H46A
9A-6006
H47A, 57A
9A-6007
9A-1014 9A-1015 9A-1016 9A-1017
Height in.
mm
4 5 6 7
101 127 152 178
Universal Splice Plates
Step Down Splice Plates
Vertical Adjustable Splice Plates
• Used to splice to existing cable tray systems • Furnished in pairs with hardware
• These splice plates are offered for connecting cable tray sections having side rails of different heights • Furnished in pairs with hardware
• These plates provide for changes in elevation that do not conform to standard vertical fittings • Furnished in pairs with hardware
Catalog No.
Height in.
Catalog No. 9A-1004-1/2 9A-1005-1/2 9A-1006-1/2 9A-1007-1/2
9A-1045 9A-1046 9A-1060 9A-1047 9A-1061 9A-1062
Height in.
mm
4 5 6 7
101 127 152 178
Horizontal Adjustable
Splice Plates
• Offered to adjust a cable tray run for changes in direction in a horizontal plane that do not conform to standard horizontal fittings • Furnished in pairs with hardware • New design bonding jumpers not required • (X) Insert 4, 5, 6 or 7 for side rail height 9A-103(X)-12 or 9A-103(X)-36 One pair splice plates with extensions.
L L
5 6 6 7 7 7
to to to to to to
mm
4 4 5 4 5 6
127 152 152 178 178 178
to to to to to to
101 101 127 101 127 152
Catalog No. 9A-1024 9A-1025 9A-1026 9A-1027
Tray Width
'L'
9A-103(X) 9A-103(X)-12 9A-103(X)-36
Mitered Not mitered Not mitered
Thru 36" Thru 12" Thru 36"
N/A 16" 41"
www.cooperbline.com
101 127 152 178
• Branch from existing cable tray runs at any point • Pivot to any required angle • Can be used with vertical adjustable splice plates to form vertical tees or wyes • UL Classified for grounding (bonding jumper not required) • Furnished in pairs with hardware
Catalog No.
Cable Tray End Cut
mm
4 5 6 7
Branch Pivot Connectors
9A-103(X) Splice only
Catalog No.
Height in.
9A-2044 9A-2045 9A-2046 9A-2047
94
Height in.
mm
4 5 6 7
101 127 152 178
Series 2,3&4 Aluminum
Intermediate Span
Long Span
Cross Connector Bracket
Tray Hardware
• For field connecting crossing section • Furnished in pairs with 3/8" hardware
For field installation drill 13/32" hole.
Cable Tray • Aluminum
Short Span
Accessories
Standard Tray Hardware Catalog No. SNCB 3/8” x 3/4” Znplt Square Neck Carriage Bolt ASTM A307 Grade A Catalog No. SFHN 3/8”-16 Znplt Serrated Flange Hex Nut ASTM A563 Grade A
Catalog No.
9A-1240
Finish: Zinc Plated ASTM B633, SC1
Offset Reducing Splice Plate
Optional Tray Hardware
• This plate is used for joining cable trays having different widths. When used in pairs they form a straight reduction; when Catalog No. used singly with a standard splice plate, they form an 9A-1064-(‡) offset reduction • Furnished as one plate 9A-1065-(‡) with hardware 9A-1066-(‡) • (‡) Insert reduction 9A-1067-(‡)
Catalog No. SNCB 3/8” x 3/4” SS6 Square Neck Carriage Bolt AISI 316 Stainless Steel
Height in.
mm
4 5 6 7
101 127 152 178
Catalog No. SFHN 3/8”-16 SS6 Serrated Flange Hex Nut AISI 316 Stainless Steel To order optional 316 Stainless Steel hardware add SS6 suffix to part number Example: 9A-1004SS6
Tray to Box Splice Plates
Frame Type Box Connector
Blind End
• Used to attach the end of a cable tray run to a distribution box or control panel • Furnished in pairs with hardware
• Designed to attach the end of a cable tray run to a distribution cabinet or control center to help reinforce the box at the point of entry • Furnished with tray connection hardware • (‡) Insert tray width
• This plate forms a closure for a dead end cable tray • Furnished as one plate with hardware • (‡) Insert tray width
Catalog No. 9A-1054 9A-1055 9A-1056 9A-1057
Catalog No.
Height in.
mm
4 5 6 7
101 127 152 178
Height in.
mm
4 5 6 7
101 127 152 178
9A-1074-(‡) 9A-1075-(‡) 9A-1076-(‡) 9A-1077-(‡)
Conduit to Cable Tray Adaptors
Catalog No.
9ZN-1150-(‡)
9A-1084-(‡) 9A-1085-(‡) 9A-1086-(‡) 9A-1087-(‡)
Height in.
mm
4 5 6 7
101 127 152 178
Conduit to Cable Tray Adaptor • Assembly required. • Conduit clamp included. • (‡) = Conduit size (1/2" thru 4").
• Assembly required. • Mounting hardware included. • Conduit clamps provided. • (‡) = Conduit size (1/2" thru 4").
Catalog No.
Catalog No.
• For easy attachment of conduit terminating at a cable tray • Use on aluminum or steel cable trays • (*) Insert G or ZN
9ZN-1155-(‡)
Cable Tie (Ladder Tray) Nylon ties provide easy attachment of cable to ladder rungs; maximum cable O.D. is 3" (76mm)
Catalog No.
Conduit Size in.
Catalog No. 99-2125-15
9(*)-1158-1/2, 3/4 9(*)-1158-1, 11/4 9(*)-1158-11/2, 2 9(*)-1158-21/2, 3 9(*)-1158-31/2, 4
Overall Length 15"
95
1/2, 3/4
1, 11/4 11/2, 2 21/2, 3 31/2, 4
Aluminum I-Beam
mm
15, 20 25, 32 40, 50 65, 80 90, 100
800-851-7415 ext. 366
Series 2,3&4 Aluminum
Intermediate Span
Long Span
Short Span
Accessories Ladder Drop-Out
Trough Drop-Out & Drop-Out Bushing
• Specially-designed Ladder Drop-Outs provide a rounded surface with 4" (101 mm) radius to protect cable as it exits from the cable tray, preventing damage to insulation. The drop-out will attach to any desired rung • (‡) Insert tray width
• These devices provide a rounded surface to protect cable as it exits from the trough-type cable tray • Hardware is included for attachment of the trough bottom drop-out • (‡) Insert tray width
Catalog No. Catalog No.
9A-1104-(‡)
Catalog No.
9A-1104T-(‡)
99-1124
Trough-Type Drop-Out
Snap-In Plastic Bushing
Barriers Horizontal Bend
Straight Section
• Horizontal Bend Barriers are flexible in order to conform to any horizontal fitting radius. Cut to length • Order catalog number based on loading depth. • Furnished with three #10 x 1/2" zinc plated self-drilling screws and a 99-9982 Barrier Strip Splice • Standard length is 72" (6 ft.), sold individually
• Standard length: 120" (3 m) 144" (12 ft.) • Order catalog number based on loading depth • Furnished with four #10 x 1/2" plated self-drilling screws and a 99-9982 splice
H
H
Catalog No.
Side Rail Height
73A-Length 74A-Length 75A-Length 76A-Length
Loading Depth 'H'
in.
mm
in.
mm
4 5 6 7
10 127 152 178
13 4 5 6
76 101 127 152
Length = 144 for 12' or 120 for 10'
Catalog No. 73A-90HBFL 74A-90HBFL 75A-90HBFL 76A-90HBFL
Side Rail Height
Loading Depth 'H'
in.
mm
in.
mm
4 5 6 7
101 127 152 178
3 4 5 6
76 101 127 152
Vertical Bend Barriers
Barrier Strip Clip
• Vertical Bend Barriers are preformed to conform to a specific vertical fitting • Furnished with three #10 x 1/2" plated self-drilling screws and a 99-9982 Barrier Strip Splice • (*) Insert 30, 45, 60 or 90 for degrees H • (†) Insert 12, 24, 36 or 48 for radius
• Zinc plated steel barrier clip fastens to either aluminum or steel ladder rung • Furnished with one #10 x 1/2" zinc plated self-drilling screw
Outside Bend (VO)
Inside Bend Catalog No. 73A-(*)VI(†) 74A-(*)VI(†) 75A-(*)VI(†) 76A-(*)VI(†)
H
Outside Bend Side Rail Catalog No. Height 73A-(*)VO(†) 74A-(*)VO(†) 75A-(*)VO(†) 76A-(*)VO(†)
www.cooperbline.com
Inside Bend (VI)
Loading Depth 'H'
in.
mm
in.
mm
4 5 6 7
101 127 152 178
3 4 5 6
76 101 127 152
Catalog No.
9ZN-9002
Catalog No.
99-9982
Barrier Strip Splice • Plastic splice holds adjoining barrier strips in straight alignment
96
Series 2,3&4 Aluminum
Intermediate Span
Long Span
Stainless Steel Cable Clamp "P"
Bonding Jumper
• Fits with series 2, 3, & 4 rungs • Attaches to rung at any point • 14 gauge Type 316 stainless steel material to minimize corrosion and induction heating • Plated steel and aluminum also available
Use at each expansion splice and where the cable tray is not mechanically/electrically continuous to ground. Sold individually. • Hardware included
Catalog No.
Catalog No.
Cross-Sectional Area
Ampacity
99-1620
1.5 Square inches
2000
99-40
2.0 Square inches
1600
Cable Size in.
mm
BP081SS
.250 - .840
6.4 - 21.3
Grounding Clamp
BP110SS
.810 - 1.100
20.6 - 28.0
BP135SS
.850 - 1.350
21.6 - 34.8
BP175SS
1.250 - 1.750
31.8 - 44.5
BP205SS
1.550 - 2.050
39.4 - 52.1
BP250SS
2.000 - 2.500
50.8 - 63.5
B-Line Cable Tray is UL® classified as to its suitability as an equipment grounding conductor. If a separate conductor for additional grounding capability is desired, B-Line offers this clamp for bolting the conductor at least once to each cable tray section. • Accepts #6 AWG to 250 MCM.
BP300SS
2.500 - 3.000
63.5 - 76.2
BP325SS
2.750 - 3.250
69.9 - 82.6
BP375SS
3.250 - 3.750
82.6 - 95.3
BP425SS
3.750 - 4.250
95.3 - 108.0
BP475SS
4.250 - 4.750 108.0 - 120.7
Catalog No.
Material
9A-2130
Tin Plated Aluminum
Grounding Clamp
Hanger Rod Clamp
• Mechanically attaches grounding cables to cable tray • Hardware included • (*) Insert ZN or SS4
• • • • • •
For 1/2" ATR Furnished in pairs Order ATR and hex nuts separately Two-piece "J"-hanger design 1500 lbs./pair capacity safety factor 3 (*) Insert ZN or G
Catalog No. Rail Height Catalog No.
9(*)-5324 9(*)-5325 9(*)-5326 9(*)-5327
Cable Size
9(*)-2351
#1 thru 2/0
9(*)-2352
3/0 thru 250 MCM
in.
mm
4 5 6 7
101 127 152 178
Threaded Rod (ATR) & Rod Coupling Size 3/8”-16 1/2”-13
Loading lbs
Catalog No.
Available Lengths
Coupling Cat. No.
610
ATR 3/8” x Length
36", 72", 120", 144"
B655-3/8
1130
ATR 1/2” x Length
36", 72", 120", 144"
B655-1/2
All dimensions in shaded areas are millimeters unless otherwise specified. Loading based on safety factor 5. Standard Finish: Zinc plated See B-Line Strut Systems Catalog for other sizes and finishes.
97
800-851-7415 ext. 366
Cable Tray • Aluminum
Short Span
Accessories
Series 2,3&4 Aluminum
Intermediate Span
Short Span
Accessories Cable Tray Clamp/Guide
Isolator Pad
• Features a no-twist design • Has four times the strength of the traditional design • Each side is labeled to ensure proper installation • Furnished in pairs, with or without hardware (see chart)
• Use as a friction reducer and/or as a dissimilar metal isolator barrier • UV resistant HDPE • Bright orange color for easy visibility • Temperature range: -100 to 160° F • Designed to use with 9(*)-1205 or 9(*)-1208 clamp/guide
21/4"
Long Span
9ZN-1208 shown. Installed as a clamp. Patent # RE35479
11/2"
Note: For heavy duty applications see 9(*)-1241 or 9(*)-1242 page 101.
Catalog No. Without With Hardware Hardware 9ZN-1204 9ZN-1208 9A-1205 9G-1205 9SS6-1205 9ZN-1205
9ZN-1204 shown. Installed as a guide.
Overall Hardware Length Size Finish
9ZN-1204NB 9ZN-1208NB -----
in.
mm
11/2 21/4 21/4 21/4 21/4 21/4
38 57 57 57 57 57
1/4" 3/8" 1/2" 1/2" 1/2" 1/2"
ZnPlt ZnPlt Alum. HDGAF 316SS ZnPlt
Isolation pad shown as when used with a guide.
Isolation pad shown with top flange doubled under for clamp application.
Catalog No.
Cable Tray Clamp
Cable Tray Guide
• Hold-down clamps for single or double cable tray runs • No drilling of support I-beam or channel is required • Sold in pieces - two clamps are required per tray • Maximum beam flange thickness 11/8" (28.58 mm)
• Expansion guide for single or double cable tray runs • Guide allows for longitudinal movement of the cable tray • No field drilling of support I-beam or channel is required • Guides are required on both sides of cable tray to prevent lateral movement - can be placed on either the inside or outside flange of cable tray • Guides are sold in pieces - two guides are required per tray • Maximum flange thickness 11/8" (28.58 mm)
Catalog No. 9ZN-1249HD 9G-1249HD
Finish
Catalog No.
Finish
ZnPlt HDGAF
9ZN-1249
ZnPlt
9G-1249
HDGAF
Nylon Pad • • • • • •
Use for friction reduction Hardness: Shore D80 Low friction coefficient UV resistant (black) Excellent weatherability UL - 94HB
99-PE34
Neoprene Roll • • • •
1/8"
6" 3"
Catalog No.
www.cooperbline.com
Use for material isolation x 2" x 20' roll Hardness: Shore A60 Good weatherability 1/8"
Catalog No.
99-NY36
98
99-NP240
Series 2,3&4 Aluminum
Intermediate Span
Catalog No.
Trapeze Support Kit (2) 1/2" x 7/8" Hex Head Cap Screw
9(*)-5506-22SH(†) (4) 1/2" Hex Nut
(2) N225WO Channel Nut
The illustrated hardware is sealed in a plastic bag and boxed with the channel, which is pre-cut to the appropriate length as shown in the chart.
(4) B202 Square Washer
(1) B22 Channel cut to the required length
The SH channel provides the convenience of pre-punched slots, which eliminates the need for field drilling.
lbs
kN
6 152
16
406
1600 7.11
9(*)-5509-22SH(†)
9 229
18
457
1250 5.56
9(*)-5512-22SH(†)
12 305
22
559
1125 5.00
9(*)-5518-22SH(†)
18 457
28
711
865 3.85
9(*)-5524-22SH(†)
24 610
34
864
700 3.11
9(*)-5530-22SH(†)
30 762
40 1016
590 2.62
9(*)-5536-22SH(†)
36
914
46 1168
510 2.27
9(*)-5542-22SH(†)
42 1067
52 1321
450 2.00
Safety factor of 3.0 on all loads.
Catalog No.
(2) 1/2" x 7/8" Hex Head Cap Screw (2) 9ZN-1205 Hold-Down Guide Clamp (4) 1/2" Hex Nut (2) N225WO Channel Nut (4) B202 Square Washer (1) Channel cut to the required length
The illustrated hardware is sealed in a plastic bag and boxed with the channel, which is pre-cut to the appropriate length as shown in the chart.
Tray Width
Channel Length
Uniform Load
in. mm
in. mm
lbs
kN
9(*)-5506-22SHA
6
152
16
9(*)-5509-22SHA
9
229
18
457 1350 6.01
9(*)-5512-22SHA
12
305
22
559 1350 6.01
9(*)-5518-22SHA
18
457
28
711
9(*)-5524-22SHA
24
610
34
864 1350 6.01
9(*)-5530-22SHA
30
762
40
1016 1350 6.01
9(*)-5536-22SHA
36
914
46
1168 1350 6.01
9(*)-5542-22SHA
42
1067
52
1321 1350 6.01
406 1350 6.01
1350 6.01
• (*) Insert GRN or G
Designed for use with 1/2" threaded rod. Order rod separately.
Trapeze Hardware Kit
in. mm
Uniform Load
• (†) Insert 3/8 for 3/8" threaded rod hardware. • (*) Insert P or G
Designed for use with 1/2" threaded rod. Order rod separately.
B-Line's trapeze kits provide the components required for a single trapeze support in one package. These kits are available in Dura-Green® epoxy coated steel with zinc-plated hardware or hot dip galvanized steel with 316stainless steel hardware.
Channel Length
in. mm
(2) 9ZN-1205 Hold-Down Guide Clamp
The SH channel provides the convenience of pre-punched slots, which eliminate the need for field drilling.
Heavy Duty Trapeze Support Kit
Tray Width
Safety factor of 3.0 on all loads.
Catalog No. In plastic bag
99
9ZN-5500-1/2 1 2 2 4 4
pr. 9ZN-1205 HHC Screw 1/2 x 7/8 znplt N525 WO znplt B202 znplt 1/2" sq washer HN 1/2 znplt
9G-5500-1/2 1 2 2 4 4
pr. 9G-1205 HHC Screw 1/2 x 7/8 SS6 N525 WO SS6 B202 HDG 1/2" sq washer HN 1/2 SS6
800-851-7415 ext. 366
Cable Tray • Aluminum
Short Span
Accessories B-Line's trapeze kits provide the components required for a single trapeze support in one package. These kits are available in pregalvanized steel with zinc-plated hardware or hot dip galvanized steel with 316 stainless steel hardware.
Long Span
Series 2,3&4 Aluminum
Intermediate Span
Long Span
Short Span
Accessories Center Hung Tray Support • B-Line's unique Center Hung Cable Tray Support allows cable to be laid-in from both sides • Eliminates costly cable pulling and field cutting of cable tray supports. Labor costs are dramatically reduced • Required hardware and threaded rod material for trapeze assemblies are reduced by 50% • Designed for use with 1/2" threaded rod. (Order rod separately) • Use with all aluminum and steel cable trays through 24" width • Load capacity is 700 lbs. per support. Eccentric loading is not to exceed a 60% vs. 40% load differential • The maximum recommended unsupported span length is 144"/12 ft. (3.66 m) • Hardware shown is furnished
(2) 1/2" Hex Nut (2) 1/2" x 7/8" Hex Head Cap Screws (1) 9/16" Inside diameter steel tubing welded to strut (2) 9ZN-1205 Hold Down Guide Clamp
Catalog No.
Tray Width
Channel Length
9ZN-5212
6", 9", 12"
18"
9ZN-5224
18", 24"
30"
ZN = Zinc Plated
(2) N525WO (1) B22 Channel cut to the required length
(1) B202 Square Washer
Center Hung Support Hardware Kit
Catalog No. In plastic bag
9ZN-5200 1 2 2 1 2
pr. 9ZN-1205 HHC Screw 1/2 x 7/8 znplt N525 WO znplt B202 znplt 1/2" sq washer HN 1/2 znplt
Bracket
Bracket
A A
Finishes available: GRN, ZNPLT, HDG Safety Load Factor 2.5 Finishes available: GRN, ZNPLT, HDG Safety Load Factor 2.5
Catalog No. Uniform Load
Catalog No. Tray Width
'A'
lbs
kN
in.
mm
in.
mm
B494-12
1580
7.02
6&9
152 & 229
12
305
B494-30 B494-36
B494-18 B494-24
830 830
3.69 3.69
12 18
305 457
18 24
457 610
B494-42 B494-48
Uniform Load
100
'A'
lbs
kN
in.
mm
in.
mm
750 665
3.33 2.95
24 30
610 762
30 36
762 914
580 500
2.58 2.22
36 42
914 1067
42 48
1067 1219
Safety Factor of 3.0 on all loads unless otherwise specified.
www.cooperbline.com
Tray Width
Aluminum Cable Tray
Intermediate Span
Long Span
Short Span
Accessories Cantilever Bracket
A
A
Finishes available: ZNPLT, GRN, HDG, SS4 Safety Load Factor 2.5
Catalog No. Uniform Load kN
in.
B297-12 B297-18
1660 1100
7.38 4.89
6&9 12
B297-24 B297-30 B297-36 B297-42
835 665 550 465
3.71 2.96 2.45 2.07
18 24 30 36
Finishes available: ZNPLT, GRN, HDG, SS4, SS6
Catalog No. Uniform Load B409-12 B409-18 B409-24
Tray Width
'A'
lbs
kN
in.
mm
in.
mm
800 530 400
3.56 2.36 1.78
6&9 12 18
152 & 229 305 457
12 18 24
305 457 610
Tray Width
lbs
Underfloor Support
Vertical Hanger Splice Plates
Works with U-Bolts - not included
• Design load is 1500 lbs/pair. • Furnished in pairs • Shipped without hardware (use splice hardware)
U-Bolt Size B501-3/4 B501-1 B501-11/4 B501-11/2 B501-2 B501-21/2
Fits Pipe O.D. .841 1.051 1.316 1.661 1.901 2.376
-
1.050 1.315 1.660 1.900 2.375 2.875
B409UF-12 B409UF-21
'A' in.
mm
152 & 229 305
12 18
305 457
457 610 762 914
24 30 36 42
610 762 914 1067
71/2" A A
• Order properly sized U-Bolts separately Finish available: ZNPLT
Catalog No. Uniform Load
mm
Catalog No. Tray Width
'A'
lbs
kN
in.
mm
in.
mm
800 450
3.55 2.00
6&9 12 & 18
152 & 229 305 & 457
12 21
305 533
9A-1224 9A-1225 9A-1226 9A-1227
Outside
'A'
Cable Tray Ht.
in.
mm
4" 5" 6" 7"
3.84 4.73 5.84 6.84
97.54 120.14 148.34 173.74
Heavy Duty Hold-Down Bracket
Heavy Duty Hold-Down Bracket
• • • •
• • • •
Design load is 2000 lbs/pair Two bolt design Sold in pairs 3/8" cable tray attachment hardware provided • 1/2" support attachment hardware not provided • (*) Insert ZN, SS4 or SS6
Design load is 4000 lbs/pair. Four bolt design Sold in pairs 3/8" cable tray attachment hardware provided • 1/2" support attachment hardware not provided • (*) Insert ZN, SS4 or SS6
Catalog No.
Catalog No.
9(*)-1241
9(*)-1242
Safety Factor of 3.0 on all loads unless otherwise specified.
101
800-851-7415 ext. 366
Cable Tray • Aluminum
Cantilever Bracket
Aluminum Cable Tray
Long Span
Intermediate Span
Short Span
Accessories Beam Clamp
Beam Clamp B355
Beam Clamp
• Finishes available: ZN, HDG • Sold in pieces * When used in pairs
• Finishes available: ZN, HDG, GRN, SS4 • Sold in pieces • Design load is 1200 lbs., when used in pairs • Order HHCS and Channel Nuts separately
• Finishes available: ZN, GRN, HDG • Sold in pieces * When used in pairs
A
Cat. No.
Cat. No.
B441-22
Design Load *
B441-22A
1275 lbs. 5.66 kN 1275 lbs. 33/4"
‘A’ Dimension
95 mm
5"
Design Load *
B212-1/4
B212-3/8
600 lbs. 2.67 kN 1000 lbs. 4.45 kN
5.66 kN
Max. Flange Thick.
3/4"
19 mm
1 1/8"
28.6 mm
127 mm
Mat'l. Thickness
1/4"
6.3 mm
3/8"
9.5 mm
B312 Anchor Strap
B305 Thru B308 & B321 Series Beam Clamps B
• Finishes available: ZN, HDG • Setscrew included
• Finish available: ZN • For a maximum beam thickness of 3/4" • For thicker beams, step up one flange width size
C D
E
T
F A
Design load safety factor of 5.
Cat. No.
Rod Size A
B
C
Design Load
B305
3/8"-16
3/8"-16
2 5/16"
7/8"
1 1/8"
2 1/2"
B306
3/8"-16
1/2"-13
2 7/16"
7/8"
1 1/8"
2 1/2"
B307
1/2"-13
1/2"-13
2 7/16"
7/8"
1 1/8"
B308
1/2"-13
1/2"-13
2 9/16"
7/8"
B321-1
3/8"-16
1/2"-13
3
9/16"
B321-2
1/2"-13
1/2"-13
3 9/16"
D
1
E
11/16"
T
lbs
kN
11 Ga.
600
2.67
7 Ga.
1100
4.90
2 1/2"
7 Ga.
1100
4.90
Cat. No.
Flange Width
1 1/8"
2 1/2"
1/4"
1500
6.68
B312-6
Up to 6"
5/8"
1/4"
1/4"
1300
5.79
B312-9
6" - 9"
3 1/4"
1/4"
1400
6.23
B312-12
9" - 12"
1
1 11/16"
F
1 5/8"
3
Beam Clamp 1/2"-13 Rod & Hex Nut Sold Separately
Catalog No. B750-J4 B750-J6 B750-J9 B750-J12
For Flange Width
Wt./C
in.
mm
lbs
kg
3"- 6" 5"- 9" 8"- 12" 11"- 15"
76.2 - 152.4 127.0 - 288.6 203.2 - 304.8 279.4 - 381.0
109 124 135 147
49.4 56.2 61.2 66.7
J-Hook & Hex Nut Included
• Finish available: ZN • Design Load 500 lbs. (2.22 kN) • Recommended torque: 'J'-Hook Nut 125 In.-Lbs. (14.1 kN/m) • Maximum flange thickness of 3/4"
Beam Clamp Catalog No. B700-J4 B700-J6 B700-J9 B700-J12
'A'
Thread Length 'TL'
Wt./C
in.
mm
in.
mm
lbs
kg
81/2" 111/2" 121/4" 171/2"
215.9 292.1 368.3 444.5
5" 6" 6" 6"
127.0 152.4 152.4 152.4
44 53 63 78
19.9 24.0 28.6 35.4
www.cooperbline.com
102
• Finish available: ZN • Hex Nut included
Material: 7 Gauge (4.6)
1 1/2" (38.1)
1 7/8" (47.6)
Aluminum Cable Tray
Intermediate Span
Ventilated Flanged
Solid Flanged
Cable Tray • Aluminum
Short Span
Accessories-Covers
Solid Non-Flanged
Long Span
Peaked Flanged
A full range of covers is available for straight sections and fittings.
Solid covers should be used when maximum enclosure of the cable is desired and no accumulation of heat is expected. Ventilated covers provide an overhead cable shield, yet allow heat to escape. B-Line recommends that covers be placed on vertical cable tray runs to a height of 6 ft. (1.83 m) to 8 ft. (2.44 m) above the floor to isolate both cables and personnel. Flanged covers have a 1/2 in. (13 mm) flange. Cover clamps are not included with the cover and must be ordered separately. All peaked covers are flanged. Standard peaked covers have 1/2" peak. Special purpose peaked covers, having a 2 to 3 pitch, provide additional slope and material thickness. The 2 to 3 pitch fitting covers are of multiple piece, welded construction.
Aluminum Cover Part Numbering Prefix Example: 80 7 A
Cover Type 80 = Solid 81 = Ventilated 82 = Peaked
40 - 24 - 144
Detail
Material
Material Thickness
6 = Non-Flanged
A = Aluminum
40 = .040 Aluminum
(80 & 81 type only)
7 = Flange
Tray Width 06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Item Description For Straight Section Cover: 144 = 12 ft. (3.66 m) 120 = 10 ft. (3.05 m) 72 = 6 ft. (1.83 m) 60 = 5 ft. (1.52 m) For fitting covers: Insert suffix of fitting to be covered. See example below.
Examples of Catalog Numbers for Fitting Covers:
Prefix
Horizontal Bend Cover Suffix
Prefix
Vertical Bend Cover Suffix
80 7 A 40 - 24 - 90 VO 24 - 4*
80 7 A 40 - 18 - 90 HB 24
Side Rail* Height Radius Fitting Angle Width Material Thickness Material Detail Cover Type
Radius Fitting Angle Width Material Thickness Material Detail Cover Type * Required for VO fittings only
103
800-851-7415 ext. 366
Aluminum Cable Tray
Intermediate Span
Short Span
Accessories Standard Cover Clamp
Combination Cover and Hold Down Clamp
• For indoor service only • Setscrew included • Sold per piece
Side Rail Height
Aluminum
All Sizes
Raised Cover Clamp • For indoor service only
• Sold per piece
Tray Type Tray Type
Long Span
Side Rail Height in. mm
Catalog No. 9ZN-9012
Catalog No. † Specify gap of 1", 2", 3" or 4".
4
101
9P-9043
5 6 7
127 152 178
9P-9053 9P-9063 9P-9073
Side Rail Height
Catalog No.
Aluminum
9A-9012
Tray Type
Side Rail Height
Catalog No.
Aluminum
4" & 5" Deep 6" & 7" Deep
9ZN-9112† 9ZN-9113†
Heavy Duty Cover Clamp • Recommended for outdoor service
Peaked Cover Clamp
(‡) Insert tray width † Add P to Catalog No. for peaked cover clamp.
in. 4 5 6 7
mm 101 127 152 178
9A-(‡)-9044† 9A-(‡)-9054† 9A-(‡)-9064† 9A-(‡)-9074†
Quantity of Standard Cover Clamps Required Straight Section 60" or 72"...............4 pcs. Straight Section 120" or 144"...........6 pcs.
2 to 3 Pitch Cover Clamp
Horizontal/Vertical Bends .................4 pcs.
• Recommended for outdoor service
Tees..................................................6 pcs. Crosses ............................................8 pcs.
Side Rail Height
(‡) Insert tray width
Catalog No.
in. 4 5
mm 101 127
9A-(‡)-9P44 9A-(‡)-9P54
6 7
152 178
9A-(‡)-9P64 9A-(‡)-9P74
Cover Joint Strip • Used to join covers • Plastic • (‡) Insert tray width
Catalog No.
www.cooperbline.com
104
99-9980-(‡)
Note: When using the Heavy Duty Cover Clamp, only one-half the number of clamps stated above is required.
Aluminum Cable Tray Specifications 1.01
Manufacturer: Subject to compliance with these specifications, cable tray systems shall be as manufactured by Cooper B-Line, Inc.
Section 2- Cable Tray Sections and Components
Cable Tray • Aluminum
Section 1- Acceptable Manufacturers
2.01
General: Except as otherwise indicated, provide metal cable trays, of types, classes and sizes indicated; with splice plates, bolts, nuts and washers for connecting units. Construct units with rounded edges and smooth surfaces; in compliance with applicable standards; and with the following additional construction features. Cable tray shall be installed according to the latest revision of NEMA VE 2.
2.02
Materials and Finish: Straight section and fitting side rails and rungs shall be extruded from Aluminum Association Alloy 6063. All fabricated parts shall be made from Aluminum Association Alloy 5052.
2.03
Ladder Cable Trays shall consist of two longitudinal members (side rails) with transverse members (rungs) welded to the side rails. Rungs shall be spaced [6] [9] [12] inches on center. Rung spacing in radiused fittings shall be industry standard 9" and measured at the center of the tray’s width. Each rung must be capable of supporting a 200 lb. concentrated load at the center of the cable tray over and above the cable load with a safety factor of 1.5.
2.04
Ventilated Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated bottom welded to the side rails or rungs spaced 4" on center. The peaks of the corrugated bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers. To provide ventilation in the tray, the valleys of the corrugated bottom shall have 21/4" x 4" rectangular holes punched along the width of the bottom.
2.05
Solid Bottom Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated bottom welded to the side rails or a solid sheet over rungs. The peaks of the corrugated bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers.
2.06
Cable tray loading depth shall be [3] [4] [5] [6] inches per NEMA VE 1.
2.07
Straight sections shall have side rails fabricated as I-beams. Straight sections shall be supplied in standard [12 foot] [24 foot] [10 foot (3 m)] [20 foot (6 m)] lengths.
2.08
Cable tray widths shall be [6] [9] [12] [18] [24] [30] [36] inches or as shown on drawings.
2.09
Splice plates shall be the Wedge-Lock design with 4 nuts and bolts per plate. The resistance of fixed splice connections between an adjacent section of tray shall not exceed 0.00033 ohm.
2.10
All fittings must have a minimum radius of [12] [24] [36] [48] inches.
Section 3- Loading Capacities and Testing 3.01
Cable tray shall be capable of carrying a uniformly distributed load of _______ lbs./ft. on a ________ ft. support span with a safety factor of 1.5 when supported as a simple span and tested per NEMA VE1-5.2. In addition to the uniformly distributed load the cable tray shall support 200 lbs. concentrated load at mid-point of span. Load and safety factors specified are applicable to both the side rails and rung capacities. Cable tray shall be made to manufacturing tolerances as specified by NEMA.
3.02
Upon request, manufacturer shall provide test reports in accordance with the latest revision of NEMA VE 1 or CSA C22.2 No. 126.
105
800-851-7415 ext. 366
Steel Cable Channel Cable Tray
• Perfect for Light Duty Applications • Economical • Great for Limited Space • Ventilated or Non-Ventilated
Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 107 Tray Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 108 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 109 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 110 Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 112 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 113
www.cooperbline.com
106
Steel Cable Channel
Short Span
Straight Sections
Straight Section Part Numbering Prefix Example: G CC - 04 - 120 Material = Type 1 - HDGAF = Type 2 - Pre-Galvanized = 304 Stainless Steel = 316 Stainless Steel
Width
CC = Ventilated Cable Channel CCN = Non-Ventilated Cable Channel
03 = 3" 04 = 4" 06 = 6"
Length x
144 = 12 ft. 120 = 10 ft.
➁
xPrimary
Length. Length.
➁Secondary
Cable Channel • Steel
G P SS4 SS6
Type
Non-Ventilated
Ventilated
Ventilated straight sections contain 21/4" diameter holes and 3/16" x 7/8" slots for cable attachment. Ventilated straight sections also have splice holes repeating every 12" to simplify field modifications. Material
Width
Depth
UL Area
Load Data *
Type
in.
in.
in.2
Safety Factor = 1.5
5
6
10
12
Safety Factor = 1.5
1.5
1.8
3.0
3.7
3
1.25
Load (lbs/ft)
24
17
6
4
Load (kg/m)
36
25
9
6 7.630
0.20
Support Span (Ft)
Load Data *
Support Span (m)
(75)
(32)
Deflection Multiplier
0.013
0.028
0.216
0.447
Deflection Multiplier
0.222
0.478
3.687
Steel
4
1.75
Load (lbs/ft)
52
36
13
9
Load (kg/m)
77
54
19
13
14 Gauge
(100)
(44)
0.063
0.130
Deflection Multiplier
0.067
0.140
1.075
2.219
6
1.75
(150)
(44)
0.40
Deflection Multiplier 0.40
0.0039 0.0082
Load (lbs/ft)
59
41
15
10
Load (kg/m)
88
61
22
15
Deflection Multiplier
0.003
0.0063
0.049
0.101
Deflection Multiplier
0.051
0.108
0.836
1.724
To calculate simple Beam Deflection in inches, multiply the design load (lbs/ft) by the Deflection Multiplier shown for the span. To calculate simple Beam Deflection in millimeters, multiply the design load (kN/m) by the Deflection Multiplier shown for the span. All dimensions in parentheses are millimeters unless otherwise specified. * Load data is determined by realistic deflection, not by failure.
107
800-851-7415 ext. 366
Steel Cable Channel
Short Span
Channel Cable Tray Connectors Fast, economical, space saving Channel Cable Tray Connectors Patent No. 5,628,481; 5,782,439. Other patents pending. Horizontal:
90˚ Bend
Cross
Tee
• Provides 0 or 6-inch radius connection for Cable Channel • The Pivot Connector is available for custom angle adjustment • up to +/– 45˚ angle adjustment • order the desired quantity separately • Slotted for easy cable fastening • Shipped with the required hardware Pivot Connector
Vertical:
90˚ Vertical Square Connector 0-inch radius
90˚ Bend 6-inch radius
Pivot Connector
• Use the same part for VO and VI applications • Slotted for easy cable fastening • The Pivot Connector is available for custom angle adjustment (order separately) • Shipped with the required hardware Connector Part Numbering Prefix Example: G CC - 04 - 90HC 060
Material G = Type 1 HDGAF
www.cooperbline.com
Tray Type CC = Ventilated Cable Channel
Width
Connector Type
Radius
03 = 3" 04 = 4" 06 = 6"
90HC = 90˚ Horizontal HTC = Horizontal Tee HXC = Horizontal Cross 90VC = 90˚ Vertical PC = Pivot Connector
Horizontal Connectors 060 = 0" & 6" Radii Vertical Connectors 00 = 0" Radius 06 = 6" Radius
108
Steel Cable Channel
Short Span
Fittings
GCCN-04-90HB12 Non-Ventilated Horizontal Bend Fittings engineered with 3" tangents for splicing integrity.
G99CC-04-HX12 Ventilated Horizontal Cross
GCC-04-90VO12 Ventilated Vertical Bend
Fittings Part Numbering Prefix Example: P CCN - 04 - 90 HB 24
Material G = Type 1 HDGAF SS4 = 304 Stainless Steel SS6 = 316 Stainless Steel P=†
Tray Type *CC = Ventilated Cable Channel CCN = Non-ventilated Cable Channel
Width 03 = 3" 04 = 4" 06 = 6"
Angle 30 45 60 90
= = = =
30° 45° 60° 90°
Fitting Type HB = Horizontal Bend HT = Horizontal Tee HX = Horizontal Cross VI = Vertical Inside Bend VO = Vertical Outside Bend
Radius 12 = 12" 24 = 24" 36 = 36" 48 = 48"
* Ventilated Cable Channel Fittings are available only in 12" and 24" radii. † - Due to multiple piece welded construction, P fittings are not available - substitute G.
109
800-851-7415 ext. 366
Cable Channel • Steel
GCCN-04-HT12 Non-Ventilated Tee
Steel Cable Channel
Short Span
Accessories Splice Plate
Blind End Plate
The Splice Plate has the standard 4-hole pattern for all cable channel. • Provided with straight sections and fittings. • Furnished as one plate with hardware. • (*) Insert G, P, SS4, SS6
Catalog No. Channel Width
The Blind End Plate forms a closure for any cable channel dead end. • Furnished as one plate with hardware. • (*) Insert G, P, SS4, SS6
Catalog No. Channel Width
9(*)-1043
in. 3
mm 76
9(*)-1583
in. 3
mm 76
9(*)-1044 9(*)-1044-6
4 6
101 152
9(*)-1584 9(*)-1586
4 6
101 152
Horizontal Adjustable Splice Plate
Vertical Adjustable Splice Plate
The Horizontal Adjustable Splice Plate adapts to changes in direction in a horizontal plane, beyond the capability of the standard horizontal fittings. • Furnished as one plate with hardware. • (*) Insert G, P, SS4, SS6
The Adjustable Splice Plate allows changes in elevation where standard vertical fittings are not applicable. • Furnished as one plate with hardware. • (*) Insert G, ZN, SS4, SS6
Catalog No. Channel Width 9(*)-1743 9(*)-1744 9(*)-1746
in. 3 4 6
mm 76 101 152
Catalog No. Channel Width 9(*)-1643 9(*)-1644 9(*)-1646
in. 3 4 6
mm 76 101 152
Channel To Tray or Channel To Channel Connector
Box Connector
Channel to Tray
The Box Connector is used to attach the end of a cable channel run to a distribution box or a control center. • Furnished as one connector with hardware. • (*) Insert G, P, SS4, SS6
Catalog No. Channel Width
Channel to Channel
Catalog No. Channel Width
9(*)-1543
in. 3
mm 76
9(*)-1261-3
in. 3
9(*)-1544 9(*)-1546
4 6
101 152
9(*)-1261-4 9(*)-1261-6
4 6
mm 76 101 152
The Channel Connector is used to link a cable channel to a cable tray, or a cable channel to cable channel. • Furnished as one plate with hardware. • (*) Insert G, P, SS4, SS6
Channel Reducer Plate
Mounting Bracket - Channel To Tray
The Channel Reducer Plate is used to join cable channel sections of different widths. • Furnished as one plate with hardware. • (*) Insert G, P, SS4, SS6
The Mounting Bracket allows a parallel run of cable channel to be attached to the side of a cable tray. It can also serve as a support splice connection. • Furnished as one bracket. • Order hardware separately. • (*) Insert G, ZN, SS4, SS6
Catalog No. Channel Width
Catalog No. Channel Width
9(*)-1843 9(*)-1863
in. 4 to 3 6 to 3
mm 101 to 76 152 to 76
9(*)-1237-3 9(*)-1237-4
in. 3 4
mm 76 101
9(*)-1864
6 to 4
152 to 101
9(*)-1237-6
6
152
www.cooperbline.com
110
Steel Cable Channel
Short Span
Accessories
Expansion Guide Clamp
Hold-Down Clamp
The Expansion Guide Clamp allows cable channel to expand and contract in the horizontal plane, but not in the transverse plane. • Furnished as one clamp. • Order 1/2" hardware separately. • (*) Insert G, ZN, SS4, SS6
The Hold-Down Clamp secures cable channel to a support member. • Furnished as one clamp. • Order 1/2" hardware separately. • (*) Insert G, ZN, SS4, SS6
Catalog No. Channel Width
Catalog No. Channel Width
mm 76 101 152
in. 3 4 6
9(*)-1245 9(*)-1246 9(*)-1246
mm 76 101 152
Channel To Floor Base Plate
Cable Channel Bushing
The Channel to Floor Base Plate is used to attach the end of a cable channel run to the floor or to an equipment mounting pad. • Anchors and hardware are ordered separately. • (*) Insert G, ZN, SS4, SS6
The Cable Channel Bushing is a snap-in plastic bushing used to protect cable insulation from mechanical wear.
Cable Channel • Steel
9(*)-1243 9(*)-1244 9(*)-1244
in. 3 4 6
Catalog No. Channel Width 9(*)-3305-3 9(*)-3305-4 9(*)-3305-6
in. 3 4 6
mm 76 101 152
Catalog No.
99-1125
Cable Channel Bracket
Cable Channel Bracket
• Finishes available: ZN, HDG
• Finishes available: ZN, HDG, GRN A
Catalog No. B185CCL
Channel Width in. 3 4 6
mm 76 101 152
Catalog No. Channel Width
8"
B409-6 B409-9
A
in.
mm
in.
mm
3 4, 6
76 101, 152
6 9
152 228
Cable Channel Hanger Single Cable Channel Hanger and Wall Mount
Designed for 1/2" Threaded Rod, Double Nut Installation
Double Cable Channel Hanger
Channel Width Material
150 lb. Safety Factor 3.0
in.
mm
in.
mm
in.
mm
3
76
4
101
6
152
Zinc Plated Steel Double Channel Single Channel
9ZN-1232-3 9ZN-1231-3 & 4
9ZN-1232-4 9ZN-1231-3 & 4
9ZN-1232-6 9ZN-1231-6
HDGAF Steel (18 Ga.) Double Channel Single Channel
9G-1232-3 9G-1231-3 & 4
9G-1232-4 9G-1231-3 & 4
9G-1232-6 9G-1231-6
111
265 lb. Safety Factor 3.0
800-851-7415 ext. 366
Steel Cable Channel
Short Span
Cable Channel Covers
90° HB
Straight Section
Covers Part Numbering x Prefix Example: 80 8 G 40 - 04 - 144
Cover Type 80 = Solid
Detail
Material
Tray Width
Material Thickness
8 = Flanged G = Type 1 HDGAF P = Type 2 Pre-Galvanized 20 = 20 Gauge PreSS4 = 304 Stainless Steel Galvanized, SS6 = 316 Stainless Steel Gauge, SS4 and SS6 18 = 18 Gauge HDGAF
Straight Section Part Number Material Type II Pre-Galvanized Steel (20 Ga.) Solid Type I Hot Dip Galvanized Steel (18 Ga.) Solid
Item Description For Straight Section Cover:
Pre-Galv & Aluminum Only:
03 = 3" 04 = 4" 06 = 6"
144 = 12 ft. 120 = 10 ft.
Pre-Galv, HDGAF & Alum 72 = 6 ft. 60 = 5 ft. For fitting covers: Insert suffix of fitting to be covered.
Channel Width Length 12' 10' 12' 10'
in. 3
mm 76
in. 4
808P20-03-144 808P20-03-120 808G18-03-72 808G18-03-60
mm 101
808P20-04-144 808P20-04-120 808G18-04-72 808G18-04-60
in. 6
mm 152
808P20-06-144 808P20-06-120 808G18-06-72 808G18-06-60
Fitting covers are available. To order, use the cover prefix followed by the fitting description. Ex: 808A40 - 03 - 90HB12.
Wrap-Around Cover Clamp
Combination Hold-Down & Cover Clamp
Wrap-Around Cover Clamps are used to securely hold a cover on cable channel in locations where strong winds can prevail. • Furnished as one clamp with hardware. • (*) Insert G, P, SS4, SS6
This clamp is used to hold both the cable channel and cover in place at the same time. • Furnished as one clamp. • Order 1/4" hardware separately. • (*) Insert G, P, SS6
Catalog No. Channel Width
Catalog No. Channel Width
9(*)-9033 9(*)-9034
in. 3 4
mm 76 101
9(*)-9023 9(*)-9024
in. 3 4
mm 76 101
9(*)-9036
6
152
9(*)-9024
6
152
All dimensions in shaded areas are millimeters unless otherwise specified.
www.cooperbline.com
112
Steel Cable Channel
Short Span
Specifications
Section 1- Acceptable Manufacturers 1.01
Manufacturer: Subject to compliance with these specifications, channel cable tray systems shall be as manufactured by Cooper B-Line, Inc.
2.01
General: Except as otherwise indicated, provide ventilated metal channel cable trays, of types, classes and sizes indicated with splice connectors, fittings and all other necessary accessories for a complete system. Provide channel cable tray with rounded edges and smooth surfaces in compliance with applicable standards, and with the following additional requirements.
2.02
Materials and finishes: Material and finishes specifications for each channel cable tray are as follows: 1.
Pre-Galvanized Steel: Straight sections and fittings shall be made from structural quality mill galvanized 14 gauge steel meeting the properties of ASTM A653SS, coating designation G90.
2.
Hot Dip Galvanized Steel: Straight sections and fittings shall be made from 14 gauge structural quality steel meeting the minimum mechanical properties of ASTM A1011 SS, Grade 33 and shall be hot-dip galvanized after fabrication in accordance with ASTM A123. All hot dip galvanized after fabrication cable trays must be returned to point of manufacture after coating for inspection, conditioning and labeling.
3.
Stainless Steel: Straight sections and fittings shall be AISI Type [304] [316].
2.03 Channel cable tray straight sections shall be constructed with ventilated flat bottom. Ventilated bottom shall be perforated with 2.25" diameter holes and have slots to facilitate the use of cable ties to secure the cables. 2.04 Straight sections shall be supplied in standard [12 foot] [10 foot (3 m)] lengths, except where shorter lengths are permitted to facilitate tray assembly as shown on drawings. 2.05
Ventilated straight sections shall have splice holes every 12 inches to simplify field modifications.
2.06
Channel cable tray width shall be [3] [4] [6] inches with a minimum loading depth of 11/4".
2.07
Fittings will have a minimum radius of [12] [24] [36] [48] inches.
2.08
Splice plates and hardware shall be included with each straight section and fitting.
113
800-851-7415 ext. 366
Cable Channel • Steel
Section 2- Selection and Components
Steel Wire Basket Cable Tray
Wire mesh systems are perfect for today’s ever changing, fast paced, short span, cabling support needs. • On-site adaptability: straight section + cutter + connectors = all you need • Field fabricated fittings - no waiting for special order fittings • B-Line offers a full compliment of styles, sizes and accessories
Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 116 Splicing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 118 Splicing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 119 Tab-Loc Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 122 Bolt Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 123 Attachments - Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 124, 129 Wall Attachments - Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 126 Access Floor Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 130 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 132
www.cooperbline.com
114
Wire Basket
Short Span
Loading Information Wire Basket System Cable Fill & Load Rating The National Electrical Code allows for 50% fill of ventilated cable tray for control or signal wiring (Article 3189(b)). This rule requires that all the individual cable cross-sectional areas added up may not exceed one half the cable tray area. The cable tray area is equal to the width times the load depth.
NEC 50% Fill Illustration This being the case, there is a practical limit to the amount of cables that can be installed in the tray, based on the trays’ width and load depth. The following chart shows the approximate cable weight that can be installed without exceeding the 50% fill rule and the tested load capacity: TRAY
TRAY
MAX.
APPROX. MAX. CABLE
SERIES
SIZE
# CABLES*
WEIGHT **LBS/FT
WB202
(2x2)
48
1.2
WB204
(2x4)
93
2.4
WB206
(2x6)
150
3.9
TESTED LOAD CAPACITY***LBS/FT 5'
6'
7'
8'
56
38
30
23
WB208
(2x8)
208
5.4
64
49
33
25
WB212
(2x12)
314
8.2
85
62
48
37
WB218
(2x18)
481
12.5
89
64
52
40
WB224
(2x24)
650
16.9
93
66
55
42
WB408
(4x8)
390
10.1
93
66
47
36
WB412
(4x12)
606
15.8
110
90
54
42
WB418
(4x18)
930
24.2
116
80
55
42
WB424
(4x24)
1255
32.6
132
83
55
42
* This chart was based on 50% fill of 4 UTP Category 5 cable (O.D. = .21" .026 lbs/ft). ** This is not a maximum load rating for the tray, rather a practical guide to the amount of cable weight that can realistically be installed. *** Tested in accordance with NEMA VE 1/CSA E22.2 No. 126.1 Individual test reports available upon request. Safety Factor: 1.5
115
800-851-7415 ext. 366
Wire Basket • Steel
In actual practice with Category 5 cables, however, the cable tray becomes completely full in reaching the “50% cable fill”. See the picture below. The tray is completely full, but the sum of the cable areas is only 50% of the tray area, due to the empty spaces between the cables.
Wire Basket
Short Span
Straight Sections
WB200 Series Wire Basket System
2" (50 mm)
2.37" (60 mm)
PART
WIDTH
NUMBER
in.
mm
WEIGHT PER PC. lbs.
kg
WB202
2
50
4.44
2.01
WB204
4
100
6.27
2.85
WB206
6
150
7.47
3.39
WB208
8
200
10.71
4.86
WB212
12
300
13.68
6.21
WB218
18
450
17.22
7.81
WB224
24
600
22.62
10.26
Width
Height: 2.37" (60 mm) Length: 118" (3 meter) Wire Dia.: 2" - 8" wide (50 mm - 200 mm) .173" (4.4 mm) 12" - 24" wide (300 mm - 600 mm) .191" (4.9 mm) Standard Finish: Yellow Zinc Dichromate Other finishes available: Stainless Steel, Paint
WB400 Series Wire Basket System
PART
4" (100 mm)
4.19" (106 mm)
WIDTH in.
mm
lbs.
kg
WB408
8
200
13.69
6.21
WB412
12
300
16.67
7.56
WB418
18
450
20.11
9.12
WB424
24
600
25.60
11.61
Width
Height: 4.19" (106 mm) Length: 118" (3 meter) Wire Dia.: .191" (4.9 mm) Standard Finish: Yellow Zinc Dichromate Other finishes available: Stainless Steel, Paint
Non-metric dimensions are nominal.
www.cooperbline.com
WEIGHT PER PC.
NUMBER
116
Wire Basket
Short Span
Straight Sections WB100 Series Wire Basket System 1" (25 mm)
1.37" (35 mm)
PART
WIDTH
WEIGHT PER PC.
NUMBER
in.
mm
lbs.
kg
WB104
4
100
4.29
1.95
WB112
12
300
9.12
4.14 Height: 1.37" (35 mm) Length: 118" (3 meter) Wire Dia.: .173" (4.4 mm)
WB504 Series Snap Mount Wire System B
Snap Mount Wire System attaches directly to ceilings, walls and equipment racks without brackets. Attach with WB4SC Snap Clamps. Ideally suited for support of local area networks and telecom cables.
A
PART
A
B
WEIGHT PER PC.
NUMBER
in.
mm
in.
mm
lbs.
kg
WB504
4.3
110
2.5
63
1.76
.8
Click
Height: 2.5" (63 mm) Length: 78" (2 meter) Wire Dia.: .173" (4.4 mm)
Snap Clamp WB4SC (See page 129)
Finish: Yellow Zinc Dichromate
WB604 Series Side Angle Wire System B
Side Angle Wire System is designed for use with existing structural shapes, columns, beams, purlins and angles. This compatibility provides for fast and economical cable support systems. Attach with B212 Beam Clamp.
A
PART
A
B
WEIGHT PER PC.
NUMBER
in.
mm
in.
mm
lbs.
kg
WB604
4.3
110
2.6
66.5
1.5
.67
Height: 2.4" (62 mm) Length: 118" (3 meter) Wire Dia.: .173" (4.4 mm) Beam Clamp B212 (See page 135)
Finish: Yellow Zinc Dichromate
Non-metric dimensions are nominal.
117
800-851-7415 ext. 366
Wire Basket • Steel
Standard Finish: Yellow Zinc Dichromate Other finishes available: Stainless Steel, Paint
Width
Wire Basket
Short Span
Splicing Components Connector Assembly Studded Plate
Long Span
Medium Span PART
WEIGHT PER 100
Ex.Long Span BOX
NUMBER
lbs.
kg
QUANTITY
WB4CA
4.9
2.2
50
1/4-20 Nut
Patented welded stud plate is designed for ease of installation and is the most widely used method for assembly of Wire Basket Systems. Use to connect two straight sections and to assemble horizontal fittings. Plate
Finish: Yellow Zinc Dichromate
Connector Assembly Studded Plate
PART
WEIGHT PER 100
BOX
NUMBER
lbs.
kg
QUANTITY
WBM6CASS4
4.9
2.2
50
6mm Nut
Patented welded stud plate is designed for ease of installation and is the most widely used method for assembly of Wire Basket Systems. Use to connect two straight sections and to assemble horizontal fittings.
Plate
Finish: Stainless Steel Type 304
Clamp Assembly Studded Plate
PART
WEIGHT PER 100
BOX
NUMBER
lbs.
kg
QUANTITY
WB4CP
3.3
1.5
50
1/4-20 Nut
Adaptable and designed for use with Connector Plate (WB4PL), Splice Plate (WB4SP), Splice Bars (WB10SB and WB43SB) for splicing of straight sections and assembly of horizontal fittings. 1/4-20 x 3/4
Finish: Yellow Zinc Dichromate*
Connector Plate
∅.27 (7 mm)
PART
WEIGHT PER 100 lbs.
kg
QUANTITY
WB4PL
1.6
.70
50
Combine Connector Plate with Clamp Assembly (WB4CP) to create Connector Assembly WB4CA. Connector Plate can also be used as a Hold Down Clamp.
* Stainless Steel AISI Type 304 available. Finish: Yellow Zinc Dichromate* Non-metric dimensions are nominal.
www.cooperbline.com
BOX
NUMBER
118
Wire Basket
Short Span
Splicing Options PART
A
Long Span
Medium Span
WEIGHT PER 100
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WB4SP
2.7
70
12.2
5.5
50
Ex.Long Span
Splice Plate A 1.6 (40 mm)
Splice Plate is designed for use with Clamp Assembly (WB4CP) to provide added stability of splice connections. Use with Series 200 and 400 Wire Basket Systems. ∅.27 (7 mm)
* Stainless Steel AISI Type 304 available. Non-metric dimensions are nominal. A
WEIGHT PER 100
Splice Bar
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WB12SB
11.8
300
13.4
6.1
50
.875 (23 mm)
Splice Bars are designed for use with Clamp Assembly (WB4CP) to provide extra stability of splice connections. Use with Series 200 and Series 400 Wire Basket Systems.
A
.28 x 1 (11 x 25 mm) 2" (50 mm) on center
Finish: Yellow Zinc Dichromate PART
A
WEIGHT PER 100
Splice Bar
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WB43SB
43.4
1102
50.1
22.7
1
.875 (23 mm) A
WB43SB long Splice Bar is used for assembly of large radius horizontal bends or field cut into short splice bars. Splice Bars are designed for use with Clamp Assembly (WB4CP)
.28 x 1 (11 x 25 mm) 2" (50 mm) on center
Finish: Yellow Zinc Dichromate
PART NUMBER
WB4HAK
WEIGHT PER 100
BOX
lbs.
kg
QUANTITY
16.2
7.3
10
Horizontal Adjustable Kit
This conveniently poly-bagged horizontal adjustable kit can be used to create horizontal angles from prepared wire basket straight sections.
Finish: Yellow Zinc Dichromate
Non-metric dimensions are nominal.
119
800-851-7415 ext. 366
Wire Basket • Steel
PART
Finish: Yellow Zinc Dichromate*
Wire Basket
Short Span
Splicing Options
Medium Span
Long Span
Ex.Long Span
Components Required to Connect Two Sections of Wire Basket Systems SYSTEM
SYSTEM
CONNECTOR
CLAMP
PART
WIDTH
ASSEMBLY
ASSEMBLY
WB4CA
WB4CP
NUMBER
in.
mm
SPLICE SPLICE PLATE
BAR
WB4SP WB12SB
Order each component separately, or as poly-bagged splice kits.
See page 122 for new boltless option.
WB104 WB112
4 12
100 300
2 42
-
-
-
WB202 WB204 WB206 WB208 WB212 WB218 WB224 WB408 WB412 WB418 WB424
2 4 6 8 12 18 24 8 12 18 24
50 100 150 200 300 450 600 200 300 450 600
2 2 31 31 42 42 42 65 65 76 76
-
-
-
WB202 WB204 WB206 WB208 WB212 WB218 WB224 WB408 WB412 WB418 WB424
2 4 6 8 12 18 24 8 12 18 24
50 100 150 200 300 450 600 200 300 450 600
11 11 22 22 22 22 33 44 44
2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2
-
WB202 WB204 WB206 WB208 WB212 WB218 WB224 WB408 WB412 WB418 WB424
2 4 6 8 12 18 24 8 12 18 24
50 100 150 200 300 450 600 200 300 450 600
11 11 22 22 22 22 22 33 33
2 2 2 2 2 2 2 6 6 6 6
-
2 2 2 2 2 2 2 2 2 2 2
1 2 3 4 5 6
Install Install Install Install Install Install
Connectors
Splice Plates
Splice Bars
one connector on the system bottom. two connectors on the system bottom. three connectors on the system bottom. four connectors on the system bottom. two connectors on the system bottom and two on each side. three connectors on the system bottom and two on each side.
Non-metric dimensions are nominal.
www.cooperbline.com
120
Wire Basket
Short Span
Splicing Options
Medium Span
Long Span
Ex.Long Span
Splice Plate Kits For WB200 Series SYSTEM WIDTH in.
WB41SK
WB42SK
WB43SK
WEIGHT
BOX
mm
lbs.
kg
2
50
3.04
1.38
10
4
100
6
150
3.09
1.40
10
8
200
3.14
1.43
10
12
300
18
450
24
600
Conveniently poly-bagged for use with WB200 Series Wire Basket Systems
QTY.
Splice Plate Kits For WB400 Series PART
SYSTEM
NUMBER
WIDTH
WB44SK
WB45SK
in.
mm
8
200
12
300
18
450
24
600
WEIGHT
BOX
Conveniently poly-bagged for use with WB400 Series Wire Basket Systems
QTY. lbs.
kg
3.19
1.45
10
3.24
1.47
10
WB4ESK Expansion Splice Kit -Use on 200 and 400 series wire basket systems -Kit allows 1 3/4” expansion between two pieces of wire basket Includes: Two WB12SB and Hardware Finish: Yellow Zinc Dichromate
Non-metric dimensions are nominal.
Non-metric dimensions are nominal.
121
800-851-7415 ext. 366
Wire Basket • Steel
PART NUMBER
Wire Basket
Short Span
Tab-Loc Connector
Long Span
Medium Span PART
A
WEIGHT PER BOX
Ex.Long Span
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WB-TLC
9.29
236
16.5
7.5
100 (25 per bag)
A
Application Requirements For WB200 Series and WB400 Series
WIDTH
The recommendations listed are equal for all depths (except as noted).
*02 *04
NOTE: UL Classification refers to the NEC 392-7(b)(4) which requires by definition, a bolted mechanical connection.
SIDE
BOTTOM
SPLICE
SPLICE
2 2
N/A 1
*06
2
1
08
2
1
12
2
1
18
2
2
24
2
2
* Widths not available in 4" (100mm) depth.
Installation
Step 1
Step 2
Tab-Loc security without special tools.
Screw-driver can also be used to bend tab-locs (hold connector ends while bending).
Step 4
Non-metric dimensions are nominal.
www.cooperbline.com
Step 3
122
Wire Basket
Short Span
Bolt Cutter
Medium Span
Long Span
Ex.Long Span
Angular Bolt Cutter WB30BC
PART
WB30BC Angular Bolt Cutter
SIZE
WEIGHT PER PC.
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WB30BC
24
600
6.8
3.1
1
WB30RB
-
-
1.3
.6
1
Cut and remove each wire as illustrated below. Follow cutting pattern and blade positioning. Placing Wire Basket open side down provides the optimum cutting angle.
Completely adaptable, B-Line’s Wire Basket System is designed to accommodate jobsite changes. Straight sections can be modified to produce bends, tees, crosses or reducers. Cut wires with B-Line’s Angular Bolt Cutter, bend to preferred radius and assemble.
2 3
4
5
6
7
8
Cutting Order For the best results, use a WB30BC Angular Blade Offset Bolt Cutter with 24" (600 mm) long handles. The Offset Blade Cutter produces a clean cut. Position bolt cutter blades near the cross wire and perpendicular to wire to be cut (see illustration below). Proper cut will make the assembly faster, easier and safer while minimizing grinding.
B-Line’s Wire Basket is designed with total flexibility and offers unlimited job site adjustment. Wire Basket is adaptable to assist you in solving unexpected job site conditions. Helpful Hint: Field reports indicate good results using a grinding disk or reciprocating saw with a metal cutting blade.
X Offset Cut
Do not use center cut blades.
Non-metric dimensions are nominal.
123
800-851-7415 ext. 366
Wire Basket • Steel
WB30RB Replacement Blade
Wire Basket
Short Span
Attachments - Supports Snap Hanger
PART
A
A
Ex.Long Span
Long Span
Medium Span
WEIGHT PER 100
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WB4SH
.63
16
8.8
4.0
25
Snap lock side mount hanger is designed for 1/4" threaded rod trapeze type support. The Snap Hanger provides two wire contact security for the WB200 and WB400 series systems. It can also be utilized as a wall support bracket for WB200 series in 2", 4" and 6" (50, 100 and 150 mm) wide systems. Wall mount Attach to the wall with 1/4" hardware (order separately). Trapeze To complete Snap Hanger Trapeze assembly, use: 2 - WB4SH Snap Hangers 4 - HN 1/4" Hex Nuts (order separately)
Finish: Yellow Zinc Dichromate
Wall Bracket and Box Mount Plate
PART
A
A
WEIGHT PER 100
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WB4WB
.55
14
22.0
10.0
25
• Designed for wall attachment of 2", 4" and up to 6" (50, 100, 150 mm) in wire baskets. Bend tabs to secure. Wall mounting hole patterns provided in bracket for up to 1/4" hardware. Wall mount hardware not included. Box Mount Plate Side Wire Support
• Designed for attachment of equipment to Wire Basket System. Hole patterns provided for up to 1/4" hardware.
Finish: Pre-Galvanized Zinc
Hold Down Plate Slot Size
PART NUMBER
SLOT SIZE in.
WB4HD .28 x .55
WEIGHT PER 100
BOX
mm
lbs.
kg
QUANTITY
7 x 14
7.3
3.3
50
Designed to secure Wire Basket System to Wall Brackets and Trapeze Kit. To complete 1/4" Hold Down Plate assembly, use: 1 - WB4HD 1/4" Hold Down Plate 1 - SRHMS 1/4" x 1" Machine Screw (order separately) 1 - HN 1/4" Hex Nut (order separately) or N524 wo channel nut
Finish: Yellow Zinc Dichromate
Center Hanger
PART NUMBER
Slot Size
SLOT SIZE in.
WB6CH .40 x .70
WEIGHT PER 100
BOX
mm
lbs.
kg
QUANTITY
10 x 18
7.1
3.2
50
Designed to support 4" and 6" wide Wire Basket System for 3/8" threaded rod. Order threaded rod separately. To protect cables use threaded rod protector. Optional ATR stiffener. Finish: Yellow Zinc Dichromate
To complete 3/8" Center Hanger assembly, use: 2 - WB6CH 3/8" Center Hangers 2 - HN 3/8" Hex Nuts (order separately)
Non-metric dimensions are nominal.
www.cooperbline.com
124
Wire Basket
Short Span
Attachments - Supports PART
SYSTEM
CHANNEL
NUMBER
WIDTH
LENGTH
Click Hanger Center Hanger/Trapeze Kits
BOX QUANTITY
in.
mm
in.
mm
lbs.
kg
8 12
200 300
11.5 13.8
292 350
.9 1.8
.4 .8
1 1
Click hanger design, no wire basket attachment hardware required. Engineered and supplied in kit form to install as a center hung or trapeze hanger. Supplied with 1 security plug, 1 washer and 4 - 3/8" hex nuts. PART
SYSTEM
NUMBER
WB5318 WB5324
WIDTH
CHANNEL
WT PER PC.
LENGTH
Balanced loading recommended
Click Hanger Trapeze Kits
BOX QUANTITY
in.
mm
in.
mm
lbs.
kg
15 24
450 600
21.7 25.6
550 650
2.5 3
1.1 1.4
1 1
Click hanger design, no wire basket attachment hardware required. Engineered and supplied in kit form to install as a trapeze hanger. Supplied with 4 - 3/8" hex nuts. PART
CHANNEL
NUMBER
LENGTH
9ZN-5212WB
Finish: Pre-Galvanized Zinc
WEIGHT PER 100
Finish: Pre-Galvanized Zinc
Heavy Duty Center Hung Support
BOX QUANTITY
in.
mm
lbs.
kg
18
457
3.5
1.6
1
Designed for 1/2" ATR. Channel length of 18" supports 12, 18 and 24 inch Wire Basket Systems. Welded steel tubing extends 6" above strut. 1/2" ATR attachment hardware provided. Wire Basket mounting attachment hardware provided. Heavy Duty Center Hung Support assembly includes: 1 - 9ZN-5212WO 1 - B202 Square Washer, Pltd 2 - HN 1/2" Hex Nuts, Pltd 2 - FN224, Pltd 2 - SRHMS 1/4" x 1" Machine Screws, Pltd 2 - WB4HD Hold Down Plates, YZN PART NUMBER
WB5506 WB5508 WB5512 WB5518 WB5524
SYSTEM
A
WT PER PC.
WIDTH
Finish: Electro-Galvanized Zinc
Trapeze Support Kits
BOX QTY.
in.
mm
in.
mm
lbs.
kg
6 8 12 18 24
150 200 300 450 600
10 12 16 22 28
250 200 400 560 710
1.6 1.7 2.0 2.5 2.9
.73 .77 .91 1.13 1.32
Trapeze Kit for 1/4" ATR includes: 4 - B450-1/4" U-Washers 4 - HN 1/4" Hex Nuts 1 - WB4HD Hold Down Plate 1 - FN224 1/4" Twirl Nut 1 - SRHMS 1/4" x 1" Machine Screw 1 - B54SH Channel
Trapeze Support Kit includes all components required for single trapeze support in one package. Designed for use with 1/4" ATR. Also available for 3/8" ATR, add -3/8 suffix to part number. Order threaded rod separately.
1 1 1 1 1
A
Trapeze Kit for 3/8" ATR add -3/8" suffix, includes: 4 - B450-3/8" U-Washers 4 - HN 3/8" Hex Nuts 1 - WB4HD Hold Down Plate 1 - FN224 1/4" Twirl Nut 1 - SRHMS 1/4" x 1" Machine Screw 1 - B54SH Channel
Finish: Channel: Pre-Galvanized Zinc Hold Down Plate: Yellow Zinc Dichromate Other components: Electro-Galvanized Zinc
Non-metric dimensions are nominal.
125
800-851-7415 ext. 366
Wire Basket • Steel
WB5308 WB5312
WT PER PC.
Wire Basket
Short Span
Wall Attachments - Supports Click Brackets
PART
SYSTEM
NUMBER
WIDTH
A
Ex.Long Span
Long Span
Medium Span
WT PER PC.
BOX QTY.
in.
mm
in.
mm
lbs.
kg
WB506CB
4
100
6
150
.73
.33
1
WB508CB
6
150
8
200
1.04
.47
1
WB510CB
8
200
10
250
1.03
.47
1
WB514CB
12
300
14
350
2.32
1.05
1
Install directly to a wall or in combination with Support Bracket. Click Brackets are designed for fast and economical support of Wire Basket System. Simply position Wire Basket on the Click Bracket and lock into position with flat blade screwdriver as illustrated. Designed for 3/8" mounting hardware (not included). Security plug provided for wall mounting or strut channel mounting. 5.5" (140 mm)
A
Finish: Pre-Galvanized Zinc
Bottom Bend Top Bend
Slotted Wall Brackets
PART NUMBER
B
A
A
B
WT PER PC.
BOX
in.
mm
in.
mm
lbs.
kg
QTY.
B199-6
6
150
1.94
50
.58
.26
1
B199-8
8
200
3.30
84
.82
.37
1
B199-12
12
300
3.44
88
1.03
.47
1
B199-18
18
450
4.94
126
2.32
1.05
1
B199-24
24
600
6.44
164
3.7
1.68
1
Adjustable bracket to optimize wire basket positioning Attach directly to a wall or B-Line channels with 1/2� hardware. Use WB4CP Clamp Assemblies to secure Wire Basket System to the bracket. Order hardware separately.
Finish: Electro-Galvanized Zinc
Reinforced Click Bracket
B
A
PART
SYSTEM
NUMBER
WIDTH
A
B
WT PER PC. BOX QTY
in.
mm
in.
mm
in.
mm
lbs.
kg
WB5108
8
200 9.8 250
3.5
87
.97
.44
1
WB5112
12 300 13.8 350
3.5
87
1.32 .60
1
WB5118
18 450 19.7 500
5.0
125
2.43 1.00
1
WB5124
24 600 25.6 650
5.0
125
2.87 1.30
1
Wall bracket for up to 24 inch wide systems. Two wall attachment holes provided for 3/8" hardware. Wall mount hardware not provided. Finish: Pre-Galvanized Zinc
Non-metric dimensions are nominal.
www.cooperbline.com
126
Wire Basket
Short Span
Wall Attachments - Supports PART
USABLE
NUMBER
WIDTH in.
A
WT PER PC.
Medium Span
Long Span
Ex.Long Span
Support Brackets
BOX QTY.
mm
in.
mm
lbs.
kg
WB506SB
4 100
6
150
.58
.26
1
WB508SB
6 150
8
200
.84
.38
1
WB510SB
8 200
10
250
1.03
.47
1
WB514SB
12 300
14
350
2.32
1.05
1
5.5" (140 mm)
A
Install Support Bracket directly to the wall or in combination with Click Bracket. Install with 3/8" hardware. Security plug provided for wall mounting or strut channel mounting. Mounting hardware not provided.
WEIGHT PER 100
WBSP
Security Plug
BAG
lbs.
kg
QUANTITY
.022
.010
50
Wire Basket • Steel
PART NUMBER
Finish: Pre-Galvanized Zinc
Security plug is supplied with and used to mount support channels to walls or other structures.
Closed Mounting
Open
Material: Polypropylene
Brackets can be mounted directly to a wall or used in combination as illustrated. When installing two brackets back-to-back, use two Security Plugs. Order brackets and components separately. Spacer B-Line Standard Channel
Support and Click Brackets Installation Details
Use Two Security Plugs
Security Plug
Channel Nut Security Plug
Support Bracket Support Bracket
Click Bracket
Click Bracket
Non-metric dimensions are nominal.
127
800-851-7415 ext. 366
Wire Basket
Short Span
Wall Attachments - Supports Wall Termination Kit
PART
A
WEIGHT PER PC.
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WBWTK
9
229
1.3
.590
1
Kit includes all hardware necessary to support wire basket system when terminated at a wall. Mount slotted angle to wall with up to 3/8" hardware (not included).
A
Wall Termination Kit includes: 1 1 1 1
-
SA276-9 Slotted Angle WB6CH - Hold Down 3/8" x 1" Slotted Head Screw 3/8" Hex Nut
Finish: Zinc Plated
Wall Mount Kit
PART NUMBER
A
WEIGHT PER PC. lbs.
kg
BOX
in.
mm
QUANTITY
WB48WMK
8
203
.764
.347
1
WB1224WMK
12
305
1.224
.555
1
Kit includes all hardware necessary to mount wire basket to a wall horizontally or vertically. Mount strut to wall with up to 1/2" hardware (not included).
A
Wall Mount Kit includes: WB48WMR 1 1 1 1
WB1224WMR 1 2 2 2
Vertically Mounted
Finish: Strut: Pre-Galvanized Hardware: Zinc Plated
Horizontally Mounted
Non-metric dimensions are nominal.
www.cooperbline.com
128
B54SH Strut - Pre-Galvanized WB4HD Hold Downs - YZN 1/4" x 1" Slotted Head Screw - Pltd N224WO Channel Nut - Pltd
Wire Basket
Short Span
Support Accessories
Adaptor Kit
PART
WEIGHT PER 100
BOX
NUMBER
lbs.
kg
QUANTITY
SB2204
.37
.17
1
Adaptor Kit includes all hardware necessary to connect Wire Basket System to top of relay rack at right angle or parallel position. Adaptor Kit includes: -
Mounting Plate 5/16" x 2" J-Bolts HN 5/16" Hex Nuts LW 5/16" Lock Washers
Finish: Hold Down Plate: Yellow Zinc Dichromate Other components: Zinc Plated
PART
WEIGHT PER 100
Snap Clamp
BOX
NUMBER
lbs.
kg
QUANTITY
WB4SC
11.0
5.0
25
Snap Clamp is designed for quick attachment of Series WB504 Snap Mount Wire Basket to ceilings, racks, walls and other equipment. Secure with 1/4" hardware (not included).
Finish: Yellow Zinc Dichromate
Non-metric dimensions are nominal.
129
800-851-7415 ext. 366
Wire Basket • Steel
1 2 2 2
Wire Basket
Short Span
Access Floor Accessories Under Floor Stand
A 8.5" (216 mm) 12" (305 mm)
B
PART
A
NUMBER
in. mm
B
WB312-18UF
3
WB412-18UF
4 102
WB512-18UF
5 127
4.59 117
2.30
1.04
1
WB612-18UF
6 152
5.04 128
2.70
1.22
1
76
WT PER PC.
BOX
in.
mm
lbs.
kg
QTY.
3.69
94
1.50
.47
1
4.14 105
1.90
.86
1
Designed to elevate wire basket 3, 4, 5, or 6" off floor. No hardware required to mount wire basket to bracket. Simply bend tabs down around wires using a screwdriver. Floor mount slot size: .313" x .813" (for 1/4" hardware, order separately.) Finish: Pre-Galvanized, Optional - Dura-Green
2 Pole Support Kit
PART NUMBER
A
A
WT PER PC. lbs.
kg
BOX
in.
mm
WB138FPSK
27
686
1.963 .890
QTY.
1
WB200FPSK
27.75
705
2.003 .909
1
WB138FPSK is for round post sizes 1" - 1.375" and for 7/8" square posts. WB200FPSK is for round post sizes 1.5" - 2". Kit includes all hardware necessary to support wire basket system from raised floor posts on either 24 inch or 600 mm centers. 2 Pole Support Kit includes:
For up to 18" wide wire basket
Finish: Zinc Plated
Floor Support
1 2 4 4 4 1 1 1 1
-
SA158 Slotted Angle B501 U-Bolt 5/16" Flat Washer 5/16" Lock Washer 5/16" Hex Nut WB4HD Hold Down 1/4" x 1" Slotted Head Screw 1/4" Flat Washer 1/4" Hex Nut
PART
WEIGHT PER 100
BOX
NUMBER
lbs.
kg
QUANTITY
WB2FS
.44
.20
10
Non-metallic snap lock Floor Support is designed for use under access floors. Floor Support elevates Wire Basket System 15/8" (41.3 mm) above the floor. To attach Floor Support, use Liquid Nails™ or anchors. Polyamide material. Sized for 1/4" hardware (not included). Elevation increments of 13/8" (35 mm) can be obtained by stacking Floor Supports.
Material: Plastic Non-metric dimensions are nominal.
www.cooperbline.com
130
Wire Basket
Short Span
Access Floor Accessories
Medium Span
Long Span
Ex.Long Span
Post Clamp
PART
WEIGHT PER 100
NUMBER
lbs.
kg
QUANTITY
BOX
WB2PC
41.0
18.6
10
Finish: Zinc Plated WT PER PC.
BOX
NUMBER
PART
in.
WIDTH mm
in.
A mm
lbs.
kg
QTY.
B409UF-12
12
300
12 300
3.6
1.63
1
B409UF-18
18
450
18 450
4.5
2.04
1
B409UF-24
24
600
24 600
5.4
2.45
1
Under Floor Support Bracket
Under Floor Support Bracket provides rugged support for Wire Basket System from access floor post. To complete the installation, use B501 U-Bolts (order separately).
A
Finish: Zinc Plated PART NUMBER
B501-1 B501-11/2
WT PER 100
BOX
in.
A mm
THREAD SIZE
lbs.
kg
QTY.
13/8
30
5/ -18 16
14
6.3
50
50
5/ -18 16
16
7.2
50
B501-2
27/16
62
3/ -16 8
27
12.2
20
B501-21/2
215/16
75
3/ -16 8
32
14.5
25
2
U-Bolts
A
Designed for attachment of Under Floor Support Brackets to access floor post. Each U-Bolt includes two hex nuts. Finish: Zinc Plated
Non-metric dimensions are nominal.
131
800-851-7415 ext. 366
Wire Basket • Steel
Designed for use with Support and Click Brackets for support of Wire Basket Systems from access floor post. Use with round post sizes .9 to 1.2 and with 7/8" square posts. Only recommended on flat side of square post as shown. Do not over tighten bolts.
Wire Basket
Short Span
Attachments Rail Riser
PART
3.75" (95 mm)
A
WEIGHT PER 100
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
WB2RR
2
50
3.0
1.5
50
Provides expansion capabilities for existing 2" or 4" systems where additional cable fill area is required. Simple, fast, economical and no tools required - simply snaps on. Increases cable fill depth two inches. Recommended installation frequency: two required every three feet, depending on cable density. Provides controlled cable exit locations. Does not interfere with cable fill area. Can be used on any fitting configuration.
A
Finish: Yellow Zinc Dichromate
Radius Shield
PART NUMBER
11" (279 mm)
A
A
WEIGHT PER 100
BOX
in.
mm
lbs.
kg
QUANTITY
WB2RSPL
2.5
63
7.2
3.2
20
WB4RSPL
4.3
110
12.3
5.5
20
Provides a smooth inside radius surface. No tools or fasteners needed to install. Sizes for 2 & 4 inch fill systems; 90° horizontal bends, tees and crosses. Installs in seconds. Simply hold in place and bend back tabs. Slick surface to reduce cable friction. WB2RSPL shown
Material: Gray Tinted Polycarbonate
Drop-Out
A
Finish: Yellow Zinc Dichromate
Cable Drop-Out
PART
A
WEIGHT PER PC.
NUMBER
in.
mm
WB06DO
6
150
WB08DO
8
WB12DO
12
lbs.
BOX
kg
QUANTITY
.68
.3
1
200
.91
.4
1
300
1.36
.6
1
This easy to install drop-out provides a 4" (101.6) radius to protect cables exiting wire basket. For side drop-out, insert slotted flange between top two wires and use one WB4CP. For underside attachment, use two WB4CP’s for each wire basket section attached. WB4CP’s not included. Use in combination for wider widths.
PART
WEIGHT PER 100
BOX
NUMBER
lbs.
kg
QUANTITY
WB2DO
1.76
.80
10
Non-metallic 2" (50 mm) radius Cable Drop-Out snap locks into mesh bottom and protects cables from sharp bend. Polyamide material. Material: Plastic
Non-metric dimensions are nominal.
www.cooperbline.com
132
Wire Basket
Short Span
Attachments PART
SYSTEM
NUMBER
WIDTH
LENGTH
WT PER PC.
UNIT OF
Covers
MEASURE
in.
mm
in.
m
lbs.
kg
WBP200259
2
50
59
1.5
1.3
.6
1
WBP200459
4
100
59
1.5
2.0
.9
1
WBP200659
6
150
59
1.5
2.8
1.3
1
WBP200859
8
200
59
1.5
3.6
1.6
1
WBP201259
12
300
59
1.5
5.2
2.4
1
WBP201859
18
450
59
1.5
7.5
3.4
1
WBP202459
24
600
59
1.5
9.9
4.5
1
20 gauge pre-galvanized covers 59" long (1.5 meter) supplied with four cable ties to secure to wire basket.
PART
HEIGHT
LENGTH
NUMBER
in.
mm
in.
mm
WB2B-3M
2
50
78.75
2000
WB4B-3M
4
100
118.1
3000
Barriers
Separates cables randomly. Furnished with attachment hardware.
Barrier Kit includes: 1 3 3 3 1
-
Barrier 1/4" - 20 x 1" SRHM Screw WB4PL SFHN 1/4" Hex Nut 99-9982 Barrier Strip Splice
99-9982 shown
Finish: Pre-Galvanized Zinc PART NUMBER
A
CONDUIT WT PER 100
BOX
in.
mm
SIZE
lbs.
kg
QTY.
WB050CC
1.25
32
.50
47.7
21.6
10
WB075CC
1.25
32
.75
46.9
21.3
10
WB100CC
1.25
32
1.00
45.9
20.8
10
WB125CC
1.25
32
1.25
44.0
20.0
10
WB150CC
2.00
50
1.50
69.2
31.4
5
WB200CC
2.00
50
2.00
65.5
29.7
5
Conduit Connector
A
Conduit connector is designed to connect conduit to the side or bottom of wire basket. It is designed to keep the conduit bushing outside the wire basket. Furnished with 2 of the WB4CP. Finish: Pre-Galvanized Zinc
Non-metric dimensions are nominal.
133
800-851-7415 ext. 366
Wire Basket • Steel
Finish: Pre-Galvanized Zinc
Wire Basket
Short Span
Attachments and Grounding Pan PART
SYSTEM
NUMBER
WIDTH
LENGTH in.
WT PER PC.
mm
lbs.
kg
UNIT OF MEASURE
in.
mm
WB04P
4
100
118 3.0
3.9
1.8
1
WB06P
6
150
118 3.0
6.2
2.8
1
WB08P
8
200
118 3.0
8.6
3.9
1
WB12P
12
300
118 3.0
13.3
6.0
1
WB18P
18
450
118 3.0
20.3
9.2
1
WB24P
24
600
118 3.0
27.5 12.5
1
20 gauge pre-galvanized covers 118.1" long (3.0 meter) supplied with necessary hardware to secure to wire basket.
Finish: Pre-Galvanized Zinc
Blind End
PART
A
Height
A
HEIGHT
BOX
NUMBER
in.
mm
in.
mm
QUANTITY
WB202BE
2
50
2
50
1
WB204BE
4
100
2
50
1
WB206BE
6
150
2
50
1
WB(*)08BE
8
200
(*)
(*)
1
WB(*)12BE
12
300
(*)
(*)
1
WB(*)18BE
18
450
(*)
(*)
1
WB(*)24BE
24
600
(*)
(*)
1
Forms a closure for a dead-end wire basket. Furnished as one piece with hardware. (*) Insert: 2 = 2" (50 mm), 4 = 4" (100 mm) for height Finish: Yellow Zinc Dichromate
Grounding Clamp
PART
WEIGHT PER 100
BOX
NUMBER
lbs.
kg
QUANTITY
WB2GC
6.6
3.0
25
If system grounding is required, use grounding clamps to conveniently attach bare or insulated grounding conductor to each section of Wire Basket System. Secure grounding conductor between clamps with cable ties. Accepts up to #4 wire (AWG). 速
Material: High strength copper alloy
Non-metric dimensions are nominal.
www.cooperbline.com
134
Wire Basket
Short Span
Accessories
Marking Plate PART
WEIGHT PER 100
BOX
NUMBER
lbs.
kg
QUANTITY
WB2MP
1.10
.50
50
Snap on white plastic plate can be used with Series WB200, WB400, WB504 and WB604 for identification of individual cable runs. Mark directly on the plate or use pre-printed labels.
Material: Plastic (white) PART
WEIGHT PER 100
NUMBER
lbs.
B719EB
.20
Rubber Cap
BOX
kg
QUANTITY
.10
100
PART
A
WEIGHT PER 100
Beam Clamp
BOX
NUMBER
in.
mm
lbs.
kg
QUANTITY
B212-1/4
3/ 4
19
41.0
18.6
25
Use B212 Beam Clamp to conveniently attach Series WB604 Side Angle Wire Basket to columns, beams, purlins and other structural shapes.
A
Finish: Electro-Galvanized Zinc PART
COLOR
NUMBER
WEIGHT PER PC. lbs.
QUANTITY
SB420ATG
Gray
.9
.41
1
SB420AFB
Flat Black
.9
.41
1
SB420ACW Computer White
.9
.41
1
SB420AYZN
.9
.41
1
Gold*
Touch-Up Paints
BOX
kg
*Designed to match Yellow Zinc Dichromate finish. Size: 12 ounces Type of Paint: Lacquer
Non-metric dimensions are nominal.
135
800-851-7415 ext. 366
Wire Basket • Steel
Install on wire ends if required. Fits all wire diameters.
Steel Cable Tray Cable Tray
• • •
Structural Grade Traceable Steel Roll Formed for Extra Strength Side Rails & Rungs Stamped to Provide Identification and Traceability
Series Series Series Series Series Series Series Series Series Series Series
1 Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 1 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 1 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 1 Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 2, 3, 4 & 5 Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 2, 3, 4 & 5 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 2, 3, 4 & 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 2, 3, 4 & 5 Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 2 ,3, 4 & 5 Cover Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 2, 3, 4 & 5 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg.
www.cooperbline.com
136
137 141 142 148 149 150 158 159 168 169 170
Series 1 Steel
Short Span
Intermediate Span
Straight Sections
3" NEMA VE 1 Loading Depth Actual Loading Depth = 3.077"
Straight Section Part Numbering Prefix Example: 148 P 09 - 24 - 144
148
Material
Type
P = Pre-Galvanized Steel G = Hot Dip Galvanized After Fabrication Steel
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
Width
Trough6" thru 24" wide VT = Vented Trough ST = Solid Trough 30" and 36" wide 04 = Vented Bottom SB* = Solid Bottom
Rung Spacing
Overall Width (Width + 1/8”)
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
144 = 12 ft. 120 = 10 ft.
xPrimary
148
Length. Length.
➁Secondary
Cable Tray • Steel
Series
Ladder Type (Specify Rung Spacing)
Ventilated Trough
Solid Trough
Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. The published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. B-Line Series
Side Rail Dimensions .875
148
3.625
3.077
18 gauge
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
Design Factors for Two Rails
Span meters
Load kg/m
Deflection Multiplier
Design Factors for Two Rails
NEMA: 12A, 8C CSA: C1-3m UL Cross-Sectional Area: 0.40 in2
6 8 10 12
204* 115 73 51
0.0011 0.0036 0.0087 0.0181
Area=0.51 in2 Sx=0.48 in3 Ix=0.89 in4
1.8 2.4 3.0 3.7
304* 171 109 76
.019 .061 .149 .309
Area=3.29 cm2 Sx=7.87 cm3 Ix=37.04 cm4
*When using 12" rung spacing load capacity is limited to 195 lbs/ft (290.16 kg/m) for 36" tray width. When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
137
800-851-7415 ext. 366
Series 1 Steel
Short Span
Intermediate Span
Straight Sections
4" NEMA VE 1 Loading Depth Actual Loading Depth = 3.628"
Straight Section Part Numbering Prefix Example: 156 P 09 - 24 - 144
Series 156
Material
Type
P = Pre-Galvanized Steel G = Hot Dip Galvanized After Fabrication Steel
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
Width
Trough04 = Vented Bottom SB = Solid Bottom
Rung Spacing
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
144 = 12 ft. 120 = 10 ft.
xPrimary
156
Length. Length.
➁Secondary
Overall Width (Width + 1/8”)
Ladder Type
Ventilated Bottom
Solid Bottom
(Specify Rung Spacing) Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (297.6 kg) concentrated load over and above the published loads. The published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. B-Line Series
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
Design Factors for Two Rails
Span meters
Load kg/m
Deflection Multiplier
Design Factors for Two Rails
NEMA: 12B, 8C CSA: C1-3m UL Cross-Sectional Area: 0.40 in2
6 8 10 12
304* 171 109 76
0.0007 0.0021 0.0051 0.011
Area=0.68 in2 Sx=0.724 in3 Ix=1.517 in4
1.8 2.4 3.0 3.7
452* 254 163 113
0.011 0.036 0.087 0.181
Area=4.39 cm2 Sx=11.86 cm3 Ix=63.14 cm4
.875
156
4.188
3.628
16 gauge
*When using 12" rung spacing, load capacity is limited to 234 lbs/ft (348.192 kg/m) for 30" tray width and 195 lbs/ft (290.16 kg/m) for 36" tray width. When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
www.cooperbline.com
138
Series 1 Steel
Short Span
Intermediate Span
Straight Sections
5" NEMA VE 1 Loading Depth Actual Loading Depth = 4.628"
Straight Section Part Numbering Prefix Example: 166 P 09 - 24 - 144
Material
Type
P = Pre-Galvanized Steel G = Hot Dip Galvanized After Fabrication Steel
166
Width
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
Trough04 = Vented Bottom SB = Solid Bottom
Rung Spacing
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
144 = 12 ft. 120 = 10 ft.
xPrimary
166
Length. Length.
➁Secondary
Cable Tray • Steel
Series
Overall Width (Width + 1/8”)
Ladder Type
Ventilated Bottom
Solid Bottom
(Specify Rung Spacing) Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (297.06 kg) concentrated load over and above published loads. The published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. B-Line Series
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
Design Factors for Two Rails
Span meters
Load kg/m
Deflection Multiplier
Design Factors for Two Rails
NEMA: 12B, 8C CSA: C1-3m UL Cross-Sectional Area: 0.70 in2
6 8 10 12
308* 173 111 77
0.0004 0.0013 0.0032 0.0067
Area=0.77 in2 Sx=0.93 in3 Ix=2.40 in4
1.8 2.4 3.0 3.7
458* 258 165 115
0.007 0.023 0.055 0.114
Area=4.97 cm2 Sx=15.24 cm3 Ix=99.90 cm4
.750
166
5.188
4.628
16 gauge
*When using 12" rung spacing, the load capacity is limited to 234 lbs/ft (348.192 kg/m) for 30" tray width and 195 lbs/ft (290.16 kg/m) for 36" tray width. When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
139
800-851-7415 ext. 366
Series 1 Steel
Short Span
Intermediate Span
Straight Sections
6" NEMA VE 1 Loading Depth Actual Loading Depth = 5.628"
Straight Section Part Numbering Prefix Example: 176 P 09 - 24 - 144
Series 176
Material
Type
P = Pre-Galvanized Steel G = Hot Dip Galvanized After Fabrication Steel
Ladder06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
Width
Trough04 = Vented Bottom SB = Solid Bottom
Rung Spacing
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
144 = 12 ft. 120 = 10 ft.
xPrimary
176
Length. Length.
➁Secondary
Overall Width (Width + 1/8”)
Ladder Type
Ventilated Bottom
Solid Bottom
(Specify Rung Spacing) Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (.89 kN) concentrated load over and above published loads. The published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. B-Line Series
Side Rail Dimensions
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
Deflection Multiplier
Design Factors for Two Rails
Span meters
Load kg/m
Deflection Multiplier
Design Factors for Two Rails
NEMA: 12B, 8C CSA: N/A UL Cross-Sectional Area: 0.70 in2
8 10 12
194 124 86
0.0008 0.0020 0.0042
Area=0.89 in2 Sx=1.23 in3 Ix=3.80 in4
2.4 3.0 3.7
288 184 128
0.014 0.035 0.072
Area=5.74 cm2 Sx=20.16 cm3 lx=158.2 cm4
.750
176
6.188
5.628
16 gauge
When cable trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
www.cooperbline.com
140
Series 1 Steel
Short Span
Intermediate Span
Series 1 Fittings
Cable Tray • Steel
Fittings engineered with 3" tangents for splicing integrity.
Fittings Part Numbering Prefix Example: 1 4 P - 24 - 90 HB 24
Series
Height
1
Steel 4 = 148 5 = 156 6 = 166 7 = 176
Material P = Pre-Galvanized G = HDGAF
06 09 12 18 24 30 36
Width
Angle
= 6" (152) = 9" (228) = 12" (305) = 18" (457) = 24" (609) = 30" (762) = 36" (914)
30 45 60 90
= = = =
30° 45° 60° 90°
(9" rung spacing is standard)
Type
Radius
HB = Horizontal Bend HT = Horizontal Tee HX = Horizontal Cross VI = Vertical Inside Bend VO = Vertical Outside Bend
12 = 12" (305) 24 = 24" (609)
For steel 4" vented or solid trough add VT or ST as shown below. Prefix
Prefix
14PVT - 24 - HT24
14PST - 24 - HT24
Vented Trough
Solid Trough
For steel 5", 6", 7" vented or solid bottom add 04 or SB as shown below. Prefix
Prefix
15P04 - 24 - 90HB24
15PSB - 24 - 90HB24
Vented Bottom
Solid Bottom
141
800-851-7415 ext. 366
Series 1 Steel
Short Span
Intermediate Span
Accessories
Standard (L-Shaped) Splice Plates
Expansion (L-Shaped) Splice Plates
• • • • • •
• Expansion plates allow for one inch expansion or contraction of the cable tray, or where expansion joints occur in the supporting structure • Bonding Jumpers are required. Order Separately • L-shaped lay-in design • Furnished in pairs with hardware • (*) Insert ZN or G
One pair including hardware provided with each section Furnished in pairs with hardware Prepackaged in pairs in a plastic bag, with hardware 4-hole pattern L-shaped splice plates L-shaped lay-in design (*) Insert ZN or G
Tray Series
Catalog No.
Tray Series
Catalog No.
148
9(*)-4004
148
9(*)-4014
156
9(*)-4005
156
9(*)-4015
166
9(*)-4006
166
9(*)-4016
176
9(*)-4007
176
9(*)-4017
Universal Splice Plates • Used to splice to existing cable tray systems • Furnished in pairs with hardware • (*) Insert P or G
Tray Series
Catalog No.
148
9(*)-2004-1/2
156
9(*)-2005-1/2
166 176
Step Down Splice Plates
Vertical Adjustable Splice Plates
• These splice plates are offered for connecting cable tray sections having side rails of different heights • Furnished in pairs with hardware • (*) Insert ZN or G
• These plates provide for changes in elevation that do not conform to standard vertical fittings • Furnished in pairs with hardware • (*) Insert ZN or G
Tray Series
Catalog No.
Tray Series
Catalog No.
156 to 148
9(*)-8004
148
9(*)-7024
166 to 156 or 148
9(*)-8045
156
9(*)-8024
9(*)-2006-1/2
176 to 156 or 148
9(*)-8046
166
9(*)-8025
9(*)-2007-1/2
176 to 166
9(*)-8060
176
9(*)-8026
Horizontal Adjustable Splice Plates
Branch Pivot Connectors
• Offered to adjust a cable tray run for 9(*)-803(X)-12 or 9(*)-803(X)-36 changes in direction in a horizontal One pair splice plates with extensions. plane that do not conform to L standard horizontal fittings L • Furnished in pairs with hardware • New design bonding jumpers not required • (*) Insert ZN or G • (X) Insert 4 for series 148 or 156 5 for series 166 9(*)-803(X) 6 for series 176 Splices only
• Branch from existing cable tray runs at any point. • Pivot to any required angle • Can be used with vertical adjustable splice plates to form vertical tees or wyes • UL Classified for grounding (bonding jumper not required) • Furnished in pairs with hardware • (*) Insert ZN or G
Catalog No.
Cable Tray End Cut
Tray Width
'L'
Tray Series
Catalog No.
9(*)-803(X)
Mitered
Thru 36"
N/A
156 to 148
9(*)-8244
9(*)-803(X)-12 9(*)-803(X)-36
Not mitered Not mitered
Thru 12" Thru 36"
16" 41"
166
9(*)-8245
176
9(*)-8246
www.cooperbline.com
142
Series 1 Steel
Short Span
Intermediate Span
Accessories
Offset Reducing Splice Plate
Tray Hardware
• This plate is used for joining cable trays having different widths. When used in pairs they form a straight reduction; when used singly with a standard splice plate they form an offset reduction • Furnished as one plate with hardware • (‡) Insert reduction • (*) Insert P or G
Pre-Galvanized Tray Hardware Catalog No. RNCB 3/8”-16 x 3/4” Znplt Ribbed Neck Carriage Bolt ASTM A307 Grade A Catalog No. SFHN 3/8”-16 Znplt Serrated Flange Hex Nut ASTM A563 Grade A Finish: Zinc Plated ASTM B633, SC1
Hot Dip Galvanized Tray Hardware
Catalog No.
148
9(*)-8064-(‡)
156
9(*)-8064-(‡)
166
9(*)-8065-(‡)
176
9(*)-8066-(‡)
Catalog No. RNCB 3/8”-16 x 3/4” CZ Ribbed Neck Carriage Bolt Chromium Zinc ASTM F-1136-88 Catalog No. SFHN 3/8”-16 CZ Serrated Flange Hex Nut Chromium Zinc ASTM F-1136-88
Tray to Box Splice Plates
Frame Type Box Connector
Blind End
• Used to attach the end of a cable tray run to a distribution box or control panel • Furnished in pairs with hardware • (*) Insert P or G
• Designed to attach the end of a cable tray run to a distribution cabinet or control center to help reinforce the box at the point of entry • Furnished with tray connection hardware • (‡) Insert tray width • (*) Insert ZN or G
• This plate forms a closure for a dead end cable tray • Furnished as one plate with hardware • (‡) Insert tray width • (*) Insert P or G
Tray
Tray
Tray
Series Catalog No.
Series Catalog No.
Series Catalog No.
148
9(*)-8054
148
9(*)-8074-(‡)
148
9(*)-8084-(‡)
156
9(*)-8054
156
9(*)-8074-(‡)
156
9(*)-8084-(‡)
166
9(*)-8055
166
9(*)-8075-(‡)
166
9(*)-8085-(‡)
176
9(*)-8056
176
9(*)-8076-(‡)
176
9(*)-8086-(‡)
Conduit to Tray Adaptor
Conduit to Tray Adaptor
• • • •
• For easy attachment of conduit terminating at a cable tray • Use on aluminum or steel cable trays • (*) Insert ZN or G
Assembly required Mounting hardware included Conduit clamp included (‡) = Conduit size (1/2" thru 4").
Catalog No.
9ZN-1150-(‡)
Cable Tie (Ladder Tray) Nylon ties provide easy attachment of cable to ladder rungs; maximum cable O.D. of 3" (76 mm).
Catalog No.
Conduit Size in.
9(*)-1158-1/2, 3/4 9(*)-1158-1, 11/4 9(*)-1158-11/2, 2 9(*)-1158-21/2, 3 9(*)-1158-31/2, 4
Overall Length 15"
Catalog No. 99-2125-15
143
1/2, 3/4
mm 15, 20
1, 11/4 11/2, 2 21/2, 3 31/2, 4
25, 32 40, 50 65, 80 90, 100
800-851-7415 ext. 366
Cable Tray • Steel
Tray Series
Series 1 Steel
Short Span
Intermediate Span
Accessories
Bonding Jumper
Cable Tray Clamp/Guide • Features a no-twist design • Has four times the strength of the traditional design • Each side is labeled to ensure proper installation • Furnished in pairs with or without hardware
9ZN-1208 shown
21/4" 11/2"
Patent # RE35479
Catalog No. Without With Hardware Hardware 9ZN-1204 9ZN-1208
9ZN-1204NB 9ZN-1208NB
Use at each expansion splice and where the cable tray is not mechanically/electrically continuous to ground. Sold individually. • Hardware included • 600 amp rating
9ZN-1204 shown
Overall Hardware Length Size Finish in.
mm
11/2 21/4
38 57
1/4" 3/8"
ZnPlt ZnPlt
Catalog No.
Ampacity
99-N1
600
Grounding Clamp
Grounding Clamp
• Mechanically attaches grounding cables to cable tray • Hardware included • (*) Insert ZN or SS4
B-Line Cable Tray is UL® classified as to its suitability as an equipment grounding conductor. If a separate conductor for additional grounding capability is desired, B-Line offers this clamp for bolting the conductor at least once to each tray section. • Accepts #6 AWG to 250 MCM
Catalog No.
Cable Size
9(*)-2351 9(*)-2352
#1 thru 2/0 3/0 thru 250 MCM
Catalog No.
Material
Item
9A-2130
Tin Plated Aluminum
Grounding Clamp
Support Bracket
Hanger Rod Clamp
• • • • •
• • • • •
For 1/2" ATR Furnished in pairs Order ATR and hex nuts separately Two piece "J"-hanger design 9ZN-1113 has 275 lbs./pair safety factor 3 capacity • 9ZN-532(X) has 1500 lbs./pair capacity safety factor 3
Designed for center hung or trapeze supports Can be purchased as a wall mounted bracket Load capacity is 600 lbs. (2.67 kN), safety factor 3 All components are zinc plated 1/2" threaded rod and 1/2" hex nuts not included For Cable Tray Width
Catalog No. Center Hung Wall or Trapeze Mount
in.
mm
9ZN-5106 9ZN-5109 9ZN-5112
9ZN-5106-WB 9ZN-5109-WB 9ZN-5112-WB
6 9 12
152 226 305
9ZN-5118 9ZN-5124
9ZN-5118-WB 9ZN-5124-WB
18 24
452 609
Series Catalog No.
Patent No. 5,100,086
Threaded Rod (ATR) & Rod Coupling Size
Loading lbs
Catalog No.
Available Lengths
Coupling Cat. No.
3/8-16
610
ATR 3/8 x Length
36", 72", 120", 144"
B655-3/8
36", 72", 120", 144"
B655-1/2
1/2-13
1130
ATR
1/2
x Length
Loading based on safety factor 5. Standard Finish: Zinc plated
See B-Line Strut Systems Catalog for other sizes and finishes.
www.cooperbline.com
Tray
144
148
9ZN-1113
156
9ZN-5324
166
9ZN-5325
176
9ZN-5326
Series 1 Steel
Short Span
Intermediate Span
Accessories
Ladder or Trough Type Drop-Out
Trough Drop-Out Bushing (Plastic)
• This special designed, easy to install drop-out provides a 4" (101.6 mm) radius to protect cables exiting the cable tray from damage • Attaches to a ladder rung or trough bottom (148 series only) • Hardware included • (*) Insert P or G • (‡) Insert tray width
• These snap-in plastic bushings provide a round surface to protect cables exiting from an opening in the bottom of a ventilated trough tray.
Catalog No. 9(*)-1104T-(‡)
Catalog No.
For 148 Series Only
99-1124
Barriers
• Horizontal Bend Barriers are flexible in order to conform to any horizontal fitting radius. Cut to length • Order catalog number based on loading depth • Furnished with three #10 x 1/2" zinc plated self-drilling screws and a 99-9982 Barrier Strip Splice • Standard length is 72" (6 ft.), sold individually • (*) Insert P or G
• Standard length: 120" (3 m) 144" (12 ft.). • Order catalog number based on loading depth • Furnished with four #10 x 1/2" plated selfdrilling screws and a 99-9982 splice • (*) Insert P or G
H H
Tray
H
Tray
Series
Catalog No.
in.
mm
148
72(*)-Length
3
76
Length = 144 for 12' or 120 for 10'
H
Series
Catalog No.
in.
mm
148
72(*)-90HBFL
3
76 94
156
737(*)-Length
3.7
94
156
737(*)-90HBFL
3.7
166
747(*)-Length
4.7
119
166
747(*)-90HBFL
4.7
119
176
757(*)-Length
5.7
145
176
757(*)-90HBFL
5.7
145
Vertical Bend Barriers
Barrier Strip Splice
• Vertical Bend Barriers are preformed to conform to a specific vertical fitting Inside • Furnished with three #10 x 1/2" plated self-drilling screws Bend and a 99-9982 Barrier Strip Splice (VI) • (*) Insert P or G • (**) Insert 30, 45, 60 or 90 for degrees • (†) Insert 12, 24, or 36 for radius
• Plastic splice holds adjoining barrier strips in straight alignment.
H H
Tray Series
Catalog No. Inside Bend Outside Bend
H in.
mm
148
72(*)-(**)VI(†)
72(*)-(**)VO(†)
3
76
156
737(*)-(**)VI(†)
737(*)-(**)VO(†)
3.7
94
166
747(*)-(**)VI(†)
747(*)-(**)VO(†)
4.7
119
176
757(*)-(**)VI(†)
757(*)-(**)VO(†)
5.7
145
Outside Bend (VO)
Catalog No.
145
99-9982
800-851-7415 ext. 366
Cable Tray • Steel
Horizontal Bend
Straight Section
Series 1 Steel
Short Span
Intermediate Span
Accessories Cantilever Bracket
Cantilever Bracket
A
A
Finishes available: ZNPLT, GRN, HDG Safety load factor=2.5
Finishes available: ZNPLT, GRN, HDG Safety load factor=2.5
Catalog No.
Uniform Load lbs
kN
B494-12 B494-18
1580 830
7.02 3.69
B494-24
830
3.69
Tray Width in.
mm
'A'
6 & 9 152 & 229 12 304.8 12 305 18 457.2 18
Catalog No. Uniform Load Tray Width
in. mm
457
24 609.6
lbs
kN
in.
B494-30 B494-36
750 665
3.33 2.95
B494-42
580
2.58
in.
mm
24 30
609.6 762.0
30 36
762.0 914.4
36
914.4
42
1066.8
Cantilever Bracket
Cantilever Bracket
A
A
Finishes available: ZNPLT, GRN, HDG, SS4 Safety load factor=2.5
Finishes available: ZNPLT, GRN, HDG, SS4, SS6
Catalog No. Uniform Load B409-12 B409-18 B409-24
lbs 800 530 400
Tray Width
kN 3.55 2.35 1.78
in. 6&9 12 18
'A'
mm 152 & 228 305 457
in. mm 12 304.8 18 457.2 24 609.6
Underfloor Support (U-Bolts not included) U-Bolt Size B501-3/4 B501-1 B501-11/4 B501-11/2 B501-2 B501-21/2
-
Catalog No. Uniform Load B297-30 B297-36 B297-42
lbs 665 550 465
kN 2.95 2.44 2.06
Tray Width in. 24 30 36
mm 609.6 762.0 914.4
Beam Clamp • Finishes available: ZNPLT, HDG • Sold in pieces with hardware * When used in pairs
Fits Pipe O.D. .841 1.051 1.316 1.661 1.901 2.376
'A'
mm
1.050 1.315 1.660 1.900 2.375 2.875
A
• Order properly sized U-Bolts separately.
A
Finish available: ZNPLT
Safety load factor=5.0
Catalog No. Uniform Load
Tray Width
'A'
lbs
kN
in.
mm
in.
mm
B409UF-12
800
3.55
6&9
152 & 229
12
305
B409UF-21
450
2.00
12 & 18
305 & 457
21
533
Catalog No.
Design Load* lbs
B441-22 B441-22A
1060 1060
'A'
kN
in.
mm
4.71 4.71
33/8
85.73 127.00
Safety Factor of 3.0 on all loads unless otherwise specified
www.cooperbline.com
146
5
'A' in. mm 30 762.0 36 914.4 42 1066.8
Series 1 Steel
Short Span
Intermediate Span
Accessories Beam Clamp
Steel C-Clamp
Beam Clamp
• Finishes available: ZN, GRN, HDG • Setscrew included * When used in pairs
• Finishes available: ZN, SS4
• Finishes available: ZN, GRN, HDG • Sold in pieces * When used in pairs
®
• B351 without Locknut
B210
Design Load* Tap Size Mat'l. Thickness
Catalog
Rod
Number
Size
lbs
kN
B351-3/8
3/8"-16
615
2.74
2.22 kN
B351-1/2
1/2"-13
615
2.74
Design Load *
-
B351-5/8
5/8"-11
1290
5.74
Max. Flange Thick.
3/4"
19.1 mm
B351-3/4
3/4"-10
1440
6.41
Mat'l. Thickness
1/4"
6.4 mm
B210A
1330 lbs.
5.91 kN
500 lbs.
1/2"-13
-
3/8"-16
3/8"
9.5 mm
1/4"
6.9 mm
Design Load
Cat. No.
B212-1/4
B212-3/8
1000 lbs. 4.44 kN 1665 lbs. 7.39 kN 1 1/8" 28.6 mm 3/8"
9.5 mm
B312 Anchor Strap
B305 Thru B308 & B321 Series Beam Clamps • Finishes available: ZN, HDG • Setscrew included
• Finishes available: ZN, HDG • For a maximum beam thickness of 3/4" • For thicker beams, step up one flange width size
B
C D
E
A
T
F
Cat. No.
Rod Size A
B
C
D
E
F
T
Design Load lbs
B305
3/8"-16
3/8"-16
2 5/16"
7/8"
1 1/8"
2 1/2"
11 Ga.
1000
4.45
B306
3/8"-16
1/2"-13
2
7/16"
7/8"
1
1/8"
1/2"
7 Ga.
1830
8.14
B307
1/2"-13
1/2"-13
2 7/16"
7/8"
1 1/8"
2 1/2"
7 Ga.
1830
8.14
Cat. No.
Flange Width
B308
1/2"-13
1/2"-13
2 9/16"
7/8"
1 1/8"
2 1/2"
1/4"
2500
11.12
B312-6
Up to 6"
B321-1
3/8"-16
1/2"-13
3 9/16"
1 11/16"
1 5/8"
3 1/4"
1/4"
2165
9.63
B312-9
6" - 9"
B321-2
1/2"-13
1/2"-13
3 9/16"
1 11/16"
1 5/8"
3 1/4"
1/4"
2330
10.36
B312-12
9" - 12"
2
kN
B751 Bottom Beam Clamp and Accessories Setscrew included
Setscrew included
Finish available: ZN
Loading position A - 500 lbs. Loading position B - 300 lbs.
B751
B701-J_-3/8
B751-J_-3/8*
Position A
Assembly No. To Fit Flange Sizes
B753 Provides a full 15° swivel in any direction. (State the desired rod size.)
B752
B751 B701J_ Clamp,Setscrew J-Hook,Clip & J-Hook & Square Nut
Position B
B752 Swivel & Bolt Only
B753 Swivel Nut Only
4"-5 7/8"
B751-J4-3/8*
B701-J4-3/8
B752
B753-**
6"-8 7/8"
B751-J6-3/8*
B701-J6-3/8
B752
B753-**
9"-11 7/8"
B751-J9-3/8*
B701-J9-3/8
B752
B753-**
* Clamp Assembly complete with J-Hook Assembly. Setscrew included. ** Insert 1/4, 3/8 or 1/2 for the desired rod size.
Safety Factor of 5.0 on all loads.
147
800-851-7415 ext. 366
Cable Tray • Steel
Cat. No.
• B351L with Locknut
Series 1 Steel
Short Span
Intermediate Span
Covers
Solid covers should be used when maximum enclosure of the cables is desired and no accumulation of heat is expected. Ventilated covers provide an overhead cable shield yet allow heat to escape. B-Line recommends that covers on vertical cable tray runs to a height of 6 ft. (1.83 m) to 8 ft. (2.44 m) above the floor to isolate both cables and personnel. Flanged covers Solid Non-Flanged have a .30 in. (7.6 mm) flange. Cover clamps are not included with the cover and must be ordered separately.
Solid Flanged
Ventilated Flanged
Covers Part Numbering Prefix Example: 80 1 P - 20 - 24 - 144
Cover Type
Detail
80 = Solid
1 = Flanged
81 = Ventilated
9 = Non-Flanged
Material Thickness
Material
Tray Width
P = Pre-Galvanized 20 = 20 Ga. Steel for G = HDGAF Pre-Galvanized 18 = 18 Ga. Steel for HDGAF
For fitting covers: Insert suffix of fitting to be covered. See example below.
Example of Catalog Number for Fitting Cover: Vertical Bend Cover Prefix Suffix 80 1 P 20 - 24 - 90 VO 24 - 4* Side Rail* Height Radius Fitting Angle Width Material Thickness Material Detail Cover Type * Required for VO fittings only.
= = = = = = =
Item Description For Straight Section Cover:
6" 9" 12" 18" 24" 30" 36"
Quantity of Standard Cover Clamps Required
Pre-Galvanized Only: 144 = 12 ft. (3.66 m) 120 = 10 ft. (3.05 m) Pre-Galvanized & HDGAF 72 = 6 ft. (1.83 m) 60 = 5 ft. (1.52 m)
Standard Cover Clamp • Sold per piece
Straight Section 60" or 72" . . . . . . . . . . . 4 pcs. Straight Section 120" or 144" . . . . . . . . . 6 pcs. Horizontal/Vertical Bends . . . . . . . . . . . . 4 pcs. Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 pcs. Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . 8 pcs. Note: When using the Heavy Duty Cover Clamp, only one-half the number of clamps stated above is required.
Cover Joint Strip
Tray Series
• Used to join covers • Plastic • (‡) Insert tray width Cat. No.
Combination Hold Down & Cover Clamp
06 09 12 18 24 30 36
99-9980-(‡)
Catalog No. Znplt HDGAF
148
9ZN-9019
9G-9019
156
9ZN-9014
9G-9014
166
9ZN-9015
9G-9015
176
9ZN-9016
9G-9016
Heavy Duty Cover Clamp
Raised Cover Clamp
• Sold per piece
• (‡) Insert tray width
• For indoor service only • Sold per piece
Tray Series
Tray Series
148 156 166 176
Catalog No. Znplt/Pre-Galv. HDGAF 9ZN-9243 9P-9043 9P-9053 9P-9063
9G-9243 9G-9043 9G-9053 9G-9063
www.cooperbline.com
148 156 166 176
Catalog No. Pre-Galv. HDGAF 9P-(‡)-9040 9P-(‡)-9044 9P-(‡)-9054 9P-(‡)-9064
148
9G-(‡)-9040 9G-(‡)-9044 9G-(‡)-9054 9G-(‡)-9064
† Specify gap of 1", 2", 3" or 4".
Tray Series
Catalog No.
Series 1
9ZN-910†
Series 1 Steel
Short Span
Intermediate Span
Specifications
Section 1- Acceptable Manufacturers 1.01
Manufacturer: Subject to compliance with these specifications, cable tray systems shall be as manufactured by Cooper B-Line, Inc.
2.01
General: Except as otherwise indicated, provide metal cable trays, of types, classes and sizes indicated; with splice plates, bolts, nuts and washers for connecting units. Construct units with rounded edges and smooth surfaces; in compliance with applicable standards; and with the following additional construction features. Cable tray shall be installed according to the latest revision of NEMA VE 2.
2.02
Pre-Galvanized Steel: Straight sections, fitting side rails, rungs, and covers shall be made from structural quality steel meeting the minimum mechanical properties and mill galvanized in accordance with ASTM A653 SS, Grade 33, coating designation G90. Hardware finish shall be electrogalvanized zinc per ASTM B633.
2.03
Hot dip Galvanized Steel: All side rails, covers, splice plates, and rungs shall be made from structural quality steel meeting the minimum mechanical properties of ASTM A1011 SS, Grade 33 for 14 gauge and heavier, ASTM A1008, Grade 33 Type 2 for 16 gauge and lighter, and shall be hot dip galvanized after fabrication in accordance with ASTM A123. Mill galvanized covers are not acceptable for hot dipped galvanized cable tray. Hardware finish shall be chromium zinc per ASTM F-1136-88.
2.04
Ladder Cable Trays shall consist of two longitudinal members (side rails) with transverse members (rungs) welded to the side rails. Rungs shall be spaced [6] [9] [12] inches on center. Rung spacing in radiused fittings shall be industry standard 9" and measured at the center of the tray’s width. No portion of the rungs shall protrude below the bottom plane of the side rails.
2.05
Ventilated Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated bottom welded to the side rails or rungs spaced 4" on center. The peaks of the corrugated bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers. To provide ventilation in the tray, the valleys of the corrugated bottom shall have 21/4" x 4" rectangular holes punched along the width of the bottom. 2.06
Solid Bottom Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated bottom welded to the side rails or a solid sheet over rungs. The peaks of the corrugated bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers.
2.07
Cable tray loading depth shall be [3] [4] [5] [6] inches per NEMA VE 1.
2.08
Straight sections shall be supplied in standard [12 foot] [10 foot (3 m)] lengths.
2.09
Cable tray widths shall be [6] [9] [12] [18] [24] [30] [36] inches or as shown on drawings.
2.10
Splice plates shall be L-shaped with 4 nuts and bolts per plate. The resistance of fixed splice connections between an adjacent section of tray shall not exceed 0.00033 ohm.
2.11
All fittings must have a minimum radius of [12] [24] inches.
Section 3- Loading Capacities and Testing 3.01
Cable tray shall be capable of carrying a uniformly distributed load of _______ lbs./ft. on a ________ ft. support span with a safety factor of 1.5 when supported as a simple span and tested per NEMA VE 1 5.2. Cable tray shall be made to manufacturing tolerances as specified by NEMA.
3.02
Upon request, manufacturer shall provide test reports in accordance with the latest revision of NEMA VE 1 or CSA C22.2 No. 126.
149
800-851-7415 ext. 366
Cable Tray • Steel
Section 2- Cable Tray Sections and Components
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Straight Sections
3" NEMA VE 1 Loading Depth 4" Side Rail Height
Straight Section Part Numbering Prefix Example: 248 P 09 - 24 - 144
Series 248 346
**Material
*Type
Width
P = Pre-Galvanized LadderG = HDGAF 06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
444 Trough6" thru 36" wide VT = Vented Trough ST = Solid Trough
Rung Spacing
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
x ➁
x ➁
144 120 240 144 240 288
= = = = = =
xPrimary
12 10 20 12 20 24
**Stainless steel 304 and 316 available, see engineering catalog CT-02 or visit www.cooperbline.com *Additional rung options available, see engineering catalog CT-02 or visit www.cooperbline.com Overall Width (Width + (*))
Ladder Type (Specify Rung Spacing)
www.cooperbline.com
(*)=13/16” (Series 2) 13/8” (Series 3,4,5)
Solid Trough
Ventilated Trough
150
248 346 444
Length. Length.
➁Secondary
Width (Inside)
ft. ft. ft. ft. ft. ft.
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Straight Sections
3" NEMA VE 1 Loading Depth 4" Side Rail Height Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (297.6 kg) concentrated load over and above published loads. Published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply publish load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (297.6 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Side Rail Dimensions 1.00
248
4.188
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 16A, 12C CSA: D1-3m
6 8 10 12 14 16
412* 232 148 103 76 58
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20A, 16B CSA: D1-6m
10 12 14 16 18 20
252 175 129 98 78 63
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20B, 16C CSA: E-3m
12 16 18 20 22 24
253 142 112 91 75 63
3.14
UL Cross-Sectional Area: 0.40 in2
18 gauge
B-Line Series
Side Rail Dimensions 1.50
346
4.188
3.13
UL Cross-Sectional Area: 0.70 in2
16 gauge
B-Line Series
Side Rail Dimensions 1.50
444
4.188
3.11
14 gauge
UL Cross-Sectional Area: 1.00 in2
Deflection Design Factors Span Multiplier for Two Rails meters 0.0007 0.0022 0.0054 0.011 0.021 0.036
Area=0.62 in2 Sx=0.64 in3 Ix=1.43 in4
1.8 2.4 3.0 3.7 4.3 4.9
Deflection Design Factors Span Multiplier for Two Rails meters 0.0035 0.0072 0.013 0.023 0.037 0.056
Area=0.89 in2 Sx=0.96 in3 Ix=2.22 in4
3.0 3.7 4.3 4.9 5.5 6.1
Deflection Design Factors Span Multiplier for Two Rails meters 0.0055 0.017 0.028 0.042 0.062 0.088
Area=1.19 in2 Sx=1.27 in3 Ix=2.94 in4
3.7 4.9 5.5 6.1 6.7 7.3
Load kg/m 613* 345 221 153 113 86
Load kg/m 375 260 191 146 116 94
Load kg/m 376 212 167 135 112 94
Deflection Design Factors Multiplier for Two Rails 0.012 0.038 0.093 0.192 0.356 0.607
Area=4.00 cm2 Sx=10.49 cm3 Ix=59.52 cm4
Deflection Design Factors Multiplier for Two Rails 0.060 0.124 0.229 0.391 0.626 0.955
Area=5.74 cm2 Sx=15.73 cm3 Ix=92.40 cm4
Deflection Design Factors Multiplier for Two Rails 0.093 0.295 0.473 0.721 1.055 1.495
Area=7.68 cm2 Sx=20.81 cm3 Ix=122.37 cm4
*When using 18" rung spacing, load capacity is limited to 394 lbs/ft (586.272 kg/m) for 30" cable tray width and 325 lbs/ft (483.6 kg/m) for 36" cable tray width. When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
151
800-851-7415 ext. 366
Cable Tray • Steel
B-Line Series
Series 2,3,4&5 Steel
Long Span
Intermediate Span
Straight Sections
4" NEMA VE 1 Loading Depth 5" Side Rail Height
Straight Section Part Numbering Prefix Example: 258 P 09 - 24 - 144
Series 258 356
**Material
*Type
Width
P = Pre-Galvanized LadderG = HDGAF 06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
454 Trough6" thru 36" wide VT = Vented Trough ST = Solid Trough
Rung Spacing
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
x ➁
x ➁
144 120 240 144 240 288
= = = = = =
12 10 20 12 20 24
xPrimary
**Stainless steel 304 and 316 available, see engineering catalog CT-02 or visit www.cooperbline.com *Additional rung options available, see engineering catalog CT-02 or visit www.cooperbline.com Overall Width (Width + (*))
Ladder Type (Specify Rung Spacing)
www.cooperbline.com
(*)=13/16” (Series 2) 13/8” (Series 3,4,5)
Solid Trough
Ventilated Trough
152
258 356 454
Length. Length.
➁Secondary
Width (Inside)
ft. ft. ft. ft. ft. ft.
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Straight Sections
4" NEMA VE 1 Loading Depth 5" Side Rail Height Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (297.6 kg) concentrated load over and above published loads. Published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (297.6 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Side Rail Dimensions 1.00
258
5.188
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 16A, 12C CSA: D1-3m
6 8 10 12 14 16
436* 245 157 109 80 61
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20A, 16C CSA: D1-6m
10 12 14 16 18 20
276 192 141 108 85 69
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20C CSA: E-6m
12 16 18 20 22 24
294 166 131 106 88 74
4.14
UL Cross-Sectional Area: 0.40 in2
18 gauge
B-Line Series
Side Rail Dimensions 1.50
356
5.188
4.13
UL Cross-Sectional Area: 1.00 in2
16 gauge
B-Line Series
Side Rail Dimensions 1.50
454
5.188
4.11
14 gauge
UL Cross-Sectional Area: 1.00 in2
Deflection Design Factors Span Multiplier for Two Rails meters 0.0004 0.0013 0.0032 0.0066 0.012 0.021
Area=0.71 in2 Sx=0.89 in3 Ix=2.44 in4
1.8 2.4 3.0 3.7 4.3 4.9
Deflection Design Factors Span Multiplier for Two Rails meters 0.0021 0.0043 0.0080 0.014 0.022 0.033
Area=1.00 in2 Sx=1.31 in3 Ix=3.73 in4
3.0 3.7 4.3 4.9 5.5 6.1
Deflection Design Factors Span Multiplier for Two Rails meters 0.0032 0.010 0.016 0.025 0.037 0.052
Area=1.34 in2 Sx=1.75 in3 Ix=4.96 in4
3.7 4.9 5.5 6.1 6.7 7.3
Load kg/m 649* 365 234 162 119 91
Load kg/m 411 285 210 160 127 103
Load kg/m 438 246 195 158 130 110
Deflection Design Factors Multiplier for Two Rails 0.007 0.022 0.054 0.113 0.209 0.356
Area=4.58 cm2 Sx=14.58 cm3 Ix=101.56 cm4
Deflection Design Factors Multiplier for Two Rails 0.036 0.074 0.136 0.233 0.373 0.568
Area=6.45 cm2 Sx=21.47 cm3 Ix=155.25 cm4
Deflection Design Factors Multiplier for Two Rails 0.055 0.175 0.280 0.427 0.625 0.886
Area=8.65 cm2 Sx=28.68 cm3 Ix=206.45 cm4
* When using 18" rung spacing, load capacity is limited to 394 lbs/ft (586.272 kg/m) for 30" cable tray width and 325 lbs/ft (483.6 kg/m) for 36" cable tray width. When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
153
800-851-7415 ext. 366
Cable Tray • Steel
B-Line Series
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Straight Sections
5" NEMA VE 1 Loading Depth 6" Side Rail Height
Straight Section Part Numbering Prefix Example: 268 P 09 - 24 - 144
Series 268 366
**Material
*Type
Width
P = Pre-Galvanized LadderG = HDGAF 06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
464 Trough6" thru 36" wide VT = Vented Trough ST = Solid Trough
Rung Spacing
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
x ➁
x ➁
144 120 240 144 240 288
= = = = = =
xPrimary
12 10 20 12 20 24
**Stainless steel 304 and 316 available, see engineering catalog CT-02 or visit www.cooperbline.com *Additional rung options available, see engineering catalog CT-02 or visit www.cooperbline.com
Ladder Type (Specify Rung Spacing)
www.cooperbline.com
(*)=13/16” (Series 2) 13/8” (Series 3,4,5)
Solid Trough
Ventilated Trough
154
268 366 464
Length. Length.
➁Secondary
Width (Inside) Overall Width (Width + (*))
ft. ft. ft. ft. ft. ft.
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Straight Sections
5" NEMA VE 1 Loading Depth 6" Side Rail Height Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (297.6 kg) concentrated load over and above published loads. Published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (297.6 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Side Rail Dimensions 1.00
268
6.188
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 16A, 12C CSA: D1-3m
6 8 10 12 14 16
440* 248 158 110 81 62
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20B, 16C CSA: E-6m
10 12 14 16 18 20
300 208 153 117 93 75
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20C CSA: N/A
12 16 18 20 22 24
342* 192 152 123 102 85
5.14
UL Cross-Sectional Area: 0.70 in2
18 gauge
B-Line Series
Side Rail Dimensions 1.50
366
6.188
5.14
UL Cross-Sectional Area: 1.00 in2
16 gauge
B-Line Series
Side Rail Dimensions 1.50
464
6.188
5.11
14 gauge
UL Cross-Sectional Area: 1.00 in2
Deflection Design Factors Span Multiplier for Two Rails meters 0.0003 0.0008 0.0020 0.0042 0.0078 0.013
Area=0.80 in2 Sx=1.18 in3 Ix=3.81 in4
1.8 2.4 3.0 3.7 4.3 4.9
Deflection Design Factors Span Multiplier for Two Rails meters 0.0014 0.0028 0.0052 0.0089 0.014 0.022
Area=1.11 in2 Sx=1.71 in3 Ix=5.74 in4
3.0 3.7 4.3 4.9 5.5 6.1
Deflection Design Factors Span Multiplier for Two Rails meters 0.002 0.007 0.011 0.016 0.024 0.034
Area=1.49 in2 Sx=2.28 in3 Ix=7.65 in4
3.7 4.9 5.5 6.1 6.7 7.3
Load kg/m 655* 368 236 164 120 92
Load kg/m 446 310 228 174 138 112
Load kg/m 508* 286 226 183 151 127
Deflection Design Factors Multiplier for Two Rails 0.005 0.014 0.035 0.072 0.134 0.228
Area=5.16 cm2 Sx=19.34 cm3 Ix=158.58 cm4
Deflection Design Factors Multiplier for Two Rails 0.023 0.048 0.089 0.151 0.242 0.369
Area=7.16 cm2 Sx=28.02 cm3 Ix=238.92 cm4
Deflection Design Factors Multiplier for Two Rails 0.036 0.113 0.182 0.277 0.406 0.574
Area=9.61 cm2 Sx=37.36 cm3 Ix=318.42 cm4
* When using 18" rung spacing, load capacity is limited to 394 lbs/ft (586.272 kg/m) for 30" cable tray width and 325 lbs/ft (483.6 kg/m) for 36" cable tray width. When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
155
800-851-7415 ext. 366
Cable Tray • Steel
B-Line Series
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Straight Sections
6" NEMA VE 1 Loading Depth 7" Side Rail Height
Straight Section Part Numbering Prefix Example: 378
Series 378 476
Material
P 09 - 24 - 240
*Type
Width
P = Pre-Galvanized LadderG = HDGAF 06 = 6" rung spacing 09 = 9" rung spacing 12 = 12" rung spacing
574
Rung Spacing
Trough6" thru 36" wide VT = Vented Trough ST = Solid Trough
06 09 12 18 24 30 36
= = = = = = =
6" 9" 12" 18" 24" 30" 36"
Length x ➁
x ➁
x ➁
144 240 240 288 240 288
= = = = = =
xPrimary
12 20 20 24 20 24
Overall Width (Width + 13/8")
*Additional rung options available, see engineering catalog CT-02 or visit www.cooperbline.com
Ladder Type
www.cooperbline.com
Solid Trough
Ventilated Trough
156
378 476 574
Length. Length.
➁Secondary
Width (Inside)
(Specify Rung Spacing)
ft. ft. ft. ft. ft. ft.
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Straight Sections
6" NEMA VE 1 Loading Depth 7" Side Rail Height Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will support without collapse a 200 lb. (297.6 kg) concentrated load over and above published loads. Published load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (297.6 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Side Rail Dimensions 1.50
378
7.188
6.14
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20A, 16B CSA: D1-3m
8 10 12 14 16 18 20
319 204 142 104 80 63 51
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20B, 16C CSA: D1-6m
12 16 18 20 22 24
214 120 95 77 64 53
NEMA, CSA & UL Classifications
Span ft
Load lbs/ft
NEMA: 20C CSA: E-6m
12 16 18 20 22 24
325 203 160 130 107 90
UL Cross-Sectional Area: 1.00 in2
18 gauge
B-Line Series
Side Rail Dimensions 1.50
476
7.188
6.13
UL Cross-Sectional Area: 1.00 in2
16 gauge
B-Line Series
Side Rail Dimensions 1.50
574
7.188
6.11
14 gauge
UL Cross-Sectional Area: 1.00 in2
Deflection Design Factors Span Multiplier for Two Rails meters 0.0006 0.0014 0.0028 0.0052 0.0089 0.014 0.022
Area=1.01 in2 Sx=1.77 in3 Ix=6.90 in4
2.4 3.0 3.7 4.3 4.9 5.5 6.1
Deflection Design Factors Span Multiplier for Two Rails meters 0.0019 0.0061 0.010 0.015 0.022 0.031
Area=1.22 in2 Sx=2.14 in3 Ix=8.30 in4
3.7 4.9 5.5 6.1 6.7 7.3
Deflection Design Factors Span Multiplier for Two Rails meters 0.0014 0.0046 0.0073 0.011 0.016 0.023
Area=1.64 in2 Sx=2.87 in3 Ix=11.10 in4
3.7 4.9 5.5 6.1 6.7 7.3
Load kg/m 474 304 211 155 119 94 76
Load kg/m 318 179 141 115 95 80
Load kg/m 484 302 239 193 160 134
Deflection Design Factors Multiplier for Two Rails 0.009 0.023 0.048 0.089 0.151 0.242 0.369
Area=6.52 cm2 Sx=29.01 cm3 Ix=287.20 cm4
Deflection Design Factors Multiplier for Two Rails 0.033 0.105 0.168 0.255 0.374 0.529
Area=7.87 cm2 Sx=35.07 cm3 Ix=345.47 cm4
Deflection Design Factors Multiplier for Two Rails 0.025 0.078 0.125 0.191 0.280 0.396
Area=10.58 cm2 Sx=47.03 cm3 Ix=462.02 cm4
When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.
157
800-851-7415 ext. 366
Cable Tray • Steel
B-Line Series
Series 2,3,4&5 Steel
Short Span
Intermediate Span
Long Span
Ex. Long Span
Series 2,3,4,&5 Fittings
Fittings engineered with 3” tangents for splicing integrity.
Fittings Part Numbering Prefix Example: 4 P - 24 - 90 HB 24
Side Rail Height 4 5 6 7
= = = =
4" 5" 6" 7"
(101) (127) (152) (178)
Width
*Material P=Pre-Galvanized G=HDGAF
06 = 09 = 12 = 18 = 24 = 30 = 36 =
Angle
6" (152) 9" (228) 12" (305) 18" (457) 24" (609) 30" (762) 36" (914)
30 45 60 90
*Stainless steel 304 and 316 available, see engineering catalog CT-02 or visit www.cooperbline.com
= = = =
30° 45° 60° 90°
(9" rung spacing is standard)
Type HB HT HX VI VO VT VTU HYR HYL CSF
= Horizontal Bend = Horizontal Tee = Horizontal Cross = Vertical Inside Bend = Vertical Outside Bend = Vertical Tee = Vertical Tee, Up = Horizontal Wye, Right = Horizontal Wye, Left = Cable Support Fitting
Note: Horizontal crosses and tees 30" or wider, with a radius of 36" or larger, will be of two-piece construction.
For ventilated trough or solid trough add VT or ST as shown below: Available 6" thru 36" Prefix
Prefix
4PVT - 24 - 90HB24
4PST - 24 - 90HB24
Vented Trough
www.cooperbline.com
Solid Trough
158
Radius 12 = 12" (305) 24 = 24" (609) 36 = 36" (914) 48 = 48" (1219)
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Accessories Splice Plates
Expansion Splice Plates
• Standard 8-hole pattern for all steel splice plates. • Furnished in pairs with hardware • One pair including hardware provided with straight section • Boxed in pairs with hardware • (*) Insert ZN or G
• Expansion plates allow for one inch expansion or contraction of the cable tray, or where expansion joints occur in the support structure • Furnished in pairs with hardware • Bonding Jumpers are required. Order Separately • (*) Insert ZN or G
Catalog No.
Catalog No.
9(*)-8004
mm 101
9(*)-8005 9(*)-8006 9(*)-8007
5 6 7
127 152 178
Height
9(*)-8014
in. 4
mm 101
9(*)-8015 9(*)-8016 9(*)-8017
5 6 7
127 152 178
Universal Splice Plates
Step Down Splice Plates
Vertical Adjustable Splice Plates
• Used to splice to existing cable tray systems. • Furnished in pairs with hardware • (*) Insert ZN or G
• These splice plates are offered for connecting cable tray sections having side rails of different heights • Furnished in pairs with hardware • (*) Insert ZN or G
• These plates provide for changes in elevation that do not conform to standard vertical fittings • Furnished in pairs with hardware • (*) Insert G or P
Catalog No. Catalog No. 9(*)-8004-1/2 9(*)-8005-1/2 9(*)-8006-1/2 9(*)-8007-1/2
Height in. 4 5 6 7
9(*)-8045 9(*)-8046 9(*)-8060 9(*)-8047 9(*)-8061 9(*)-8062
mm 101 127 152 178
Height in. 5 to 4 6 to 4 6 to 5 7 to 4 7 to 5 7 to 6
Catalog No. 9(*)-8024 9(*)-8025 9(*)-8026 9(*)-8027
Height in. 4 5 6 7
mm 101 127 152 178
Branch Pivot Connectors
Horizontal Adjustable Splice Plates • Offered to adjust a cable tray run for changes in direction in a horizontal plane that do not conform to standard horizontal fittings • Furnished in pairs with hardware • New design bonding jumpers not required • (*) Insert ZN or G • (X) Insert 4, 5, 6 or 7 for side rail height
mm 127 to 101 152 to 101 152 to 127 178 to 101 178 to 127 178 to 152
9(*)-803(X)-12 or 9(*)-803(X)-36 One pair splice plates with extensions.
• Branch from existing cable tray runs at any point • Pivot to any required angle • Can be used with vertical adjustable splice plates to form vertical tees or wyes • UL Classified for grounding (bonding jumper not required) • Furnished in pairs with hardware • (*) Insert ZN or G
L L
9(*)-803(X) Splice only
Catalog No. Catalog No.
Cable Tray End Cut
Tray Width
'L'
9(*)-803(X) 9(*)-803(X)-12
Mitered Not mitered
Thru 36" Thru 12"
9(*)-803(X)-36
Not mitered
Thru 36"
Height
9(*)-8244
in. 4
mm 101
N/A 16"
9(*)-8245 9(*)-8246
5 6
127 152
41"
9(*)-8247
7
178
159
800-851-7415 ext. 366
Cable Tray • Steel
Height in. 4
Series 2,3,4&5 Steel
Long Span
Intermediate Span
Accessories Cross Connector Bracket
Tray Hardware
• For field connecting crossing section • Furnished in pairs with 3/8" hardware • (*) Insert ZN or G
Pre-Galvanized Tray Hardware Catalog No. RNCB 3/8”-16 x 3/4” Znplt Ribbed Neck Carriage Bolt ASTM A307 Grade A Catalog No. SFHN 3/8”-16 Znplt Serrated Flange Hex Nut ASTM A563 Grade A
Catalog No.
9(*)-1240
Finish: Zinc Plated ASTM B633, SC1
Offset Reducing Splice Plate
Hot Dip Galvanized Tray Hardware
• This plate is used for joining cable trays having different widths. When used in pairs they form a straight reduction; when Catalog No. used singly with a standard splice plate, they form an offset reduction 9(*)-8064-(‡) • Furnished as one plate 9(*)-8065-(‡) with hardware 9(*)-8066-(‡) • (‡) Insert reduction • (*) Insert G or P 9(*)-8067-(‡)
Standard: Catalog No. RNCB 3/8”-16 x 3/4” CZ Ribbed Neck Carriage Bolt ASTM F1186-88 Grade A Chromium Zinc
Height in.
mm
4 5 6 7
101 127 152 178
Catalog No. SFHN 3/8”-16 CZ Serrated Flange Hex Nut ASTM F1186-88 Grade A Chromium Zinc
Optional: Catalog No. RNCB 3/8”-16 x 3/4” SS6 AISI 316 Stainless Steel Catalog No. SFHN 3/8”-16 SS6 AISI 316 Stainless Steel Example: 9G-8004SS6
Tray to Box Splice Plates
Frame Type Box Connector
Blind End
• Used to attach the end of a cable tray run to a distribution box or control panel • Furnished in pairs with hardware • (*) Insert G or P
• Designed to attach the end of a cable tray run to a distribution cabinet or control center to help reinforce the box at the point of entry • Furnished with tray connection hardware • (*) Insert ZN or G • (‡) Insert tray width
• This plate forms a closure for a dead end cable tray • Furnished as one plate with hardware • (*) Insert P or G • (‡) Insert tray width
Catalog No.
Catalog No.
Catalog No. 9(*)-8054 9(*)-8055 9(*)-8056 9(*)-8057
Height in. 4 5 6 7
mm 101 127 152 178
9(*)-8074-(‡) 9(*)-8075-(‡) 9(*)-8076-(‡) 9(*)-8077-(‡)
Conduit to Tray Adaptors • Assembly required. • Mounting hardware included. • Conduit clamps provided. • (‡)=Conduit size (1/2" thru 4").
Catalog No.
mm 101 127 152 178
9(*)-8084-(‡) 9(*)-8085-(‡) 9(*)-8086-(‡) 9(*)-8087-(‡)
Height in. 4 5 6 7
mm 101 127 152 178
Conduit to Tray Adaptor • Assembly required. • Conduit clamp included. • (‡)=Conduit size. (1/2" thru 4").
9ZN-1150-(‡)
Height in. 4 5 6 7
Catalog No.
• For easy attachment of conduit terminating at a cable tray • Use on aluminum or steel cable trays • (*) Insert G or ZN
9ZN-1155-(‡)
Cable Tie (Ladder Tray) Nylon ties provide easy attachment of cable to ladder rungs; maximum cable O.D. of 3" (76mm).
Overall Length 15"
Catalog No. 99-2125-15
www.cooperbline.com
Catalog No.
Conduit Size in.
9(*)-1158-1/2, 3/4 9(*)-1158-1, 11/4 9(*)-1158-11/2, 2 9(*)-1158-21/2, 3 9(*)-1158-31/2, 4
160
1/2, 3/4
1, 11/4 11/2, 2 21/2, 3 31/2, 4
mm 15, 20 25, 32 40, 50 65, 80 90, 100
Steel I-Beam
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Accessories Ladder Drop-Out
Trough Drop-Out & Drop-Out Bushing
• Specially-designed Ladder Drop-Outs provide a rounded surface with 4" (101 mm) radius to protect cable as it exits from the cable tray, preventing damage to insulation. The drop-out will attach to any desired rung • (*) Insert P or G • (‡) Insert tray width
• These devices provide a rounded surface to protect cable as it exits from the trough-type cable tray • Hardware is included for attachment to the trough bottom • (*) Insert P or G • (‡) Insert tray width
Catalog No. 9(*)-1104-(‡)
Catalog No.
Catalog No.
99-1124
9(*)-1104T-(‡)
Snap-In Plastic Bushing
Trough-Type Drop-Out
Barriers Horizontal Bend
Straight Section
Cable Tray • Steel
• Horizontal Bend Barriers are flexible in order to conform to any horizontal fitting radius. Cut to length • Order catalog number based on loading depth • Furnished with three #10 x 1/2" zinc plated self-drilling screws and a 99-9982 Barrier Strip Splice • Standard length is 72" (6 ft.), sold individually • (*) Insert P or G
• Standard length: 120" (3 m) 144" (12 ft.) • Order catalog number based on loading depth • Furnished with four #10 x 1/2" plated self-drilling screws and a 99-9982 splice • (*) Insert P or G
H
Catalog No. 73(*)-Length 74(*)-Length 75(*)-Length 76(*)-Length
Side Rail Height in. 4 5 6 7
Loading Depth 'H'
mm 101 127 152 178
in. 3 4 5 6
Catalog No.
Length = 144 for 12' or 120 for 10'
mm 76 101 127 152
73(*)-90HBFL 74(*)-90HBFL 75(*)-90HBFL 76(*)-90HBFL
Side Rail Height
Loading Depth 'H'
in. 4 5 6 7
in. 3 4 5 6
mm 101 127 152 178
Vertical Bend Barriers
Barrier Strip Clip
• Vertical Bend Barriers are preformed to conform to a specific vertical fitting • Furnished with three #10 x 1/2" plated self-drilling H screws and a 99-9982 Barrier Strip Splice • (*) Insert P or G • (**) Insert 30, 45, 60 or 90 for degrees • (†) Insert 12, 24, 36 or 48 for radius
• Zinc plated steel barrier clip fastens to either aluminum or steel ladder rung • Furnished with one #10 x 1/2" zinc plated self-drilling screw
H
Outside Bend (VO)
Inside Bend Catalog No.
Outside Bend Side Rail Catalog No. Height 73(*)-(**)VO(†) 74(*)-(**)VO(†) 75(*)-(**)VO(†) 76(*)-(**)VO(†)
mm 76 101 127 152
Catalog No.
9ZN-9002
Catalog No.
99-9982
Barrier Strip Splice
in. 73(*)-(**)VI(†) 74(*)-(**)VI(†) 75(*)-(**)VI(†) 76(*)-(**)VI(†)
Inside Bend (VI)
H
4 5 6 7
mm 101 127 152 178
Loading Depth 'H' in.
mm
3 4 5 6
76 101 127 152
161
• Plastic splice holds adjoining barrier strips in straight alignment
800-851-7415 ext. 366
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Accessories Stainless Steel Cable Clamp
Bonding Jumper
• Fits with series 2, 3, 4 & 5 standard steel rungs • Shipped flat. Field form around the cable at the time of installation
Use at each expansion splice and where the cable tray is not mechanically/electrically continuous to ground. Sold individually • Hardware included.
Catalog No.
Cable Size in.
mm
9SS4-4050
0.50 - 0.75
13 - 19
9SS4-4075
0.75 - 1.00
19 - 25
9SS4-4100
1.00 - 1.25
25 - 32
9SS4-4125
1.25 - 1.50
32 - 38
9SS4-4150
1.50 - 1.75
38 - 45
9SS4-4175
1.75 - 2.00
45 - 51
9SS4-4200
2.00 - 2.25
51 - 57
9SS4-4225
2.25 - 2.50
57 - 64
9SS4-4250
2.50 - 2.75
64 - 70
9SS4-4275
2.75 - 3.00
70 - 76
9SS4-4300
3.00 - 3.25
76 - 82
9SS4-4325
3.25 - 3.50
82 - 89
9SS4-4350
3.50 - 3.75
89 - 95
9SS4-4375
3.75 - 4.00
95 - 102
9SS4-4400
4.00 - 4.25
100 - 106
9SS4-4425
4.25 - 4.50
106 - 113
9SS4-4450
4.50 - 4.75
113 - 121
Item
Material
Catalog No.
121 - 125
Grounding Clamp
Tin Plated Aluminum
9A-2130
9SS4-4475
4.75 - 5.00
Catalog No. 99-N1
B-Line Cable Tray is UL® classified as to its suitability as an equipment grounding conductor. If a separate conductor for additional grounding capability is desired, B-Line offers this clamp for bolting the conductor at least once to each cable tray section. • Accepts #6 AWG to 250 MCM
Hanger Rod Clamp
• Mechanically attaches grounding cables to cable tray • Hardware included • (*) Insert ZN or SS4
• • • • • •
For 1/2" ATR Furnished in pairs Order ATR and hex nuts separately Two-piece “J”-hanger design (*) Insert ZN or G 1500 lbs./pair capacity safety factor 3
Catalog No.
Rail Height
9(*)-5324
in. 4
mm 101
Catalog No.
Cable Size
9(*)-2351
#1 thru 2/0
9(*)-5325 9(*)-5326
5 6
127 152
9(*)-2352
3/0 thru 250 MCM
9(*)-5327
7
178
Threaded Rod (ATR) & Rod Coupling Loading lbs
Catalog No.
Available Lengths
Coupling Cat. No.
3/8-16
610
ATR 3/8 x Length
36", 72", 120", 144"
B655-3/8
1/2-13
1130
ATR 1/2 x Length
36", 72", 120", 144"
B655-1/2
Loading based on safety factor 5. Standard Finish: Zinc Plated.
See B-Line Strut Systems Catalog for other sizes and finishes.
www.cooperbline.com
600
Grounding Clamp
Grounding Clamp
Size
Ampacity
162
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Accessories
Cable Tray Clamp/Guide • Features a no-twist design • Has four times the strength of the traditional design • Each side is labeled to ensure proper installation • Furnished in pairs, with or without hardware (see chart)
9ZN-1208 shown. Installed as a clamp.
Catalog No. Without With Hardware Hardware 9ZN-1204 9ZN-1208 9A-1205 9G-1205 9SS6-1205 9ZN-1205
11/2"
21/4"
Overall Hardware Length Size Finish
9ZN-1204NB 9ZN-1208NB -----
in.
mm
11/2 21/4 21/4 21/4 21/4 21/4
38 57 57 57 57 57
1/4" 3/8" 1/2" 1/2" 1/2" 1/2"
ZnPltd ZnPltd Alum. HDGAF 316SS ZnPltd
Patent # RE35479
When installing this device as an expansion guide on the outside flange of Steel Side Rail, use the Catalog No. B202 Square Washer in order to properly elevate the guide.
Cable Tray Guide • Expansion guide for single or double cable tray runs • Guide allows for longitudinal movement of the cable tray • No field drilling of support I-beam or channel is required • Guides are required on both sides of cable tray to prevent lateral movement - can be placed on either the inside or outside flange of cable tray • Guides are sold in pieces - two guides are required per tray • Maximum flange thickness 11/8" (28.58 mm)
Nylon Pad
Neoprene Roll
• • • • • •
• Used for material isolation • 1/8" x 2" x 20' roll • Hardness: Shore A60 • Good weatherability
Use for friction reduction Hardness: Shore D80 Low friction coefficient 1/8" UV resistant (black) Excellent weatherability UL-94HB
Catalog No.
Finish
9ZN-1249
Zinc Plated
9G-1249
HDGAF
6" 3"
Catalog No.
Catalog No. 99-NP240
99-NY36
163
800-851-7415 ext. 366
Cable Tray • Steel
9ZN-1204 shown. Installed as a guide.
Series 2,3,4&5 Steel
Long Span
Intermediate Span
Accessories
Trapeze Support Kit B-Line’s trapeze kits provide the components required for a single trapeze support in one package. These kits are available in pregalvanized steel with zinc-plated hardware or hot dip galvanized steel with mechanically galvanized hardware.
Catalog No.
(2) 1/2" x 7/8" Hex Head Cap Screw (2) 9ZN-1205 Hold-Down Guide Clamp (2) N225WO Channel Nut
The SH channel provides the convenience of pre-punched slots, which eliminate the need for field drilling.
Tray Width
Channel Uniform Length Load
in.
mm
in.
mm
lbs
kN
9(*)-5506-22SH(†)
6
152
16
406 1600 7.11
9(*)-5509-22SH(†)
9
229
18
457 1250 5.56
9(*)-5512-22SH(†)
12
305
22
559 1125 5.00
9(*)-5518-22SH(†)
18
457
28
711
9(*)-5524-22SH(†)
24
610
34
864
700 3.11
9(*)-5530-22SH(†)
30
762
40
1016
590 2.62
9(*)-5536-22SH(†)
36
914
46
1168
510 2.27
9(*)-5542-22SH(†)
42
1067
52
1321
450 2.00
Channel Length
Uniform Load
(4) 1/2" Hex Nut
(4) B202 Square Washer (1) B22 Channel cut to the required length
The illustrated hardware is sealed in a plastic bag and boxed with the channel, which is pre-cut to the appropriate length as shown in the chart. Designed for use with 1/2" threaded rod. Order rod separately.
865 3.85
• (†) Insert 3/8 for 3/8" threaded rod hardware. • (*) Insert P or G Safety factor 3.0 on all loads.
Catalog No.
Heavy Duty Trapeze Support Kit B-Line’s trapeze kits provide the components required for a single trapeze support in one package. These kits are available in Dura-Green epoxy coated steel with zinc-plated hardware or hot dip galvanized steel with mechanically galvanized hardware. The SH channel provides the convenience of pre-punched slots, which eliminates the need for field drilling. The illustrated hardware is sealed in a plastic bag and boxed with the channel, which is pre-cut to the appropriate length as shown in the chart.
in. mm
(2) 1/2" x 7/8" Hex Head Cap Screw (2) 9ZN-1205 Hold-Down Guide Clamp (4) 1/2" Hex Nut (2) N225WO Channel Nut
(4) B202 Square Washer (1) Channel cut to the required length
lbs
kN
9(*)-5506-22SHA
6
152
16
406 1350 6.01
9(*)-5509-22SHA
9
229
18
457 1350 6.01
9(*)-5512-22SHA
12
305
22
559 1350 6.01
9(*)-5518-22SHA
18
457
28
711 1350 6.01
9(*)-5524-22SHA
24
610
34
864 1350 6.01
9(*)-5530-22SHA 9(*)-5536-22SHA 9(*)-5542-22SHA
30 36 42
762 914 1067
40 46 52
1016 1350 6.01 1168 1350 6.01 1321 1350 6.01
Safety factor 3.0 on all loads.
Catalog No. In plastic bag
9ZN-5500-1/2 1 2 2 4 4
pr. 9ZN-1205 HHC Screw 1/2 x 7/8 pltd N525 WO pltd B202 pltd 1/2" sq washer HN 1/2 pltd
Safety Factor of 3.0 on all loads.
www.cooperbline.com
in. mm
• (*) Insert GRN or G
Designed for use with 1/2" threaded rod. Order rod separately.
Trapeze Hardware Kit
Tray Width
164
9G-5500-1/2 1 2 2 4 4
pr. 9G-1205 HHC Screw 1/2 x 7/8 SS6 N525 WO SS6 B202 HDG 1/2" sq washer HN 1/2 SS6
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Accessories
Center Hung Cable Tray Support (2) 1/2" Hex Nut (2) 1/2" x 7/8" Hex Head Cap Screws
Tray Width
Channel Length
9ZN-5212
6", 9", 12"
18"
9ZN-5224
18", 24"
30"
(1) 9/16" Inside diameter steel tubing welded to strut (2) 9ZN-1205 Hold Down Guide Clamp
ZN = Zinc Plated
(2) N525WO (1) B22 Channel cut to required length
(1) B202 Square Washer
Center Hung Support Hardware Kit
Catalog No.
Cable Tray • Steel
• B-Line's unique Center Hung Cable Tray Support allows cable to be laid-in from both sides • Eliminates costly cable pulling and field cutting of cable tray supports. Labor costs are dramatically reduced • Required hardware and threaded rod material for trapeze assemblies are reduced by 50% • Designed for use with 1/2" threaded rod (Order rod separately) • Use with all aluminum and steel cable trays through 24" width • Load capacity is 700 lbs. per support. Eccentric loading is not to exceed a 60% vs. 40% load differential • The maximum recommended unsupported span length is 144"/12 ft. (3.66 m) • Hardware shown is furnished
Catalog No.
9ZN-5200 1 2 2 1 2
In plastic bag
pr. 9ZN-1205 HHC Screw 1/2 x 7/8 pltd N525 WO pltd B202 pltd 1/2" sq washer HN 1/2 pltd
Bracket
Bracket
A A
Finishes available: GRN, PLTD, HDG Safety load factor=2.5 Finishes available: GRN, PLTD, HDG Safety load factor=2.5
Catalog No. Uniform Load B494-12 B494-18 B494-24
lbs
kN
1580 830 830
7.02 3.69 3.69
Catalog No. Tray Width in.
mm
6 & 9 152 & 229 12 305 18 457
'A' in.
mm
12 18 24
305 457 610
Uniform Load
Tray Width
'A'
lbs
kN
in.
mm
in.
mm
B494-30
750
3.33
24
610
30
762
B494-36 B494-42 B494-48
665 580 500
2.95 2.58 2.22
30 36 42
762 914 1067
36 42 48
914 1067 1219
Safety Factor of 3.0 on all loads unless otherwise specified
165
800-851-7415 ext. 366
Series 2,3,4&5 Steel
Intermediate Span
Ex. Long Span
Long Span
Accessories
Cantilever Bracket
Cantilever Bracket
A
A
Finishes available: PLTD, GRN, HDG Safety load factor=2.5
Catalog No. Uniform Load Uniform Load
Tray Width
'A'
lbs
kN
in.
mm
in.
mm
B409-12
800
3.55
6&9
152 & 229
12
305
B409-18
530
2.35
12
305
18
457
B409-24
400
1.78
18
457
24
610
in.
mm
in.
mm
B297-12
1660
7.37
6&9
152 & 229
12
305
B297-18 B297-24 B297-30 B297-36 B297-42
1100 835 665 550 465
4.88 3.71 2.95 2.44 2.06
12 18 24 30 36
305 457 610 762 914
18 24 30 36 42
457 610 762 914 1067
Underfloor Support (U-Bolts not included)
Vertical Hanger Splice Plates
U-Bolt Size
• • • •
B501-3/4 B501-1 B501-11/4 B501-11/2 B501-2 B501-21/2
Fits Pipe O.D. .841 1.051 1.316 1.661 1.901 2.376
-
1.050 1.315 1.660 1.900 2.375 2.875
(*) Insert ZN or G Design load is 1500 lbs/pair Furnished in pairs Shipped without hardware (use splice hardware) 7”
A
• Order properly sized U-Bolts separately.
A
Finish available: PLTD
Catalog No. Uniform Load B409UF-12 B409UF-21
Tray Width
Catalog No.
Outside
9(*)-8224 9(*)-8225 9(*)-8226 9(*)-8227
Cable Tray Ht. 4" 5" 6" 7"
'A'
lbs
kN
in.
mm
in.
mm
800 450
3.55 2.00
6&9 12 & 18
152 & 229 305 & 457
12 21
305 533
'A' in. 2.84 3.73 4.84 5.84
Heavy Duty Hold-Down Bracket
Heavy Duty Hold-Down Bracket
• • • •
• • • •
mm 85.34 110.74 136.14 161.54
Design load is 4000 lbs/pair Four bolt design Sold in pairs 3/8" cable tray attachment hardware provided • 1/2" support attachment hardware not provided • (*) Insert ZN or G
Design load is 2000 lbs/pair Two bolt design Sold in pairs 3/8" cable tray attachment hardware provided • 1/2" support attachment hardware not provided • (*) Insert ZN or G
Catalog No.
Catalog No.
9(*)-1241
Safety Factor of 3.0 on all loads unless otherwise specified
www.cooperbline.com
'A'
kN
Finish available: PLTD, GRN, HDG
Catalog No.
Tray Width
lbs
166
9(*)-1242
Series 2,3,4&5 Steel
Long Span
Intermediate Span
Accessories Beam Clamp
Beam Clamp B355
Beam Clamp
• Finishes available: ZN, HDG • Sold in pieces * When used in pairs
• Finishes available: ZN, HDG, GRN, SS4 • Sold in pieces • Design load is 1200 lbs when used in pairs • Order HHCS and Channel Nuts separately
• Finishes available: ZN, GRN, HDG • Sold in pieces * When used in pairs
A
Cat. No. B441-22
B441-22A
Design Load *
1275 lbs. 5.66 kN 1275 lbs. 5.66kN 33/4"
'A' Dimension
95mm
5"
127mm
B305 Thru B308 & B321 Series Beam Clamps
E
Rod Size A
B
B305
3/8"-16
3/8"-16
2
5/16"
7/8"
1
B306
3/8"-16
1/2"-13
2 7/16"
7/8"
1 1/8"
2 1/2"
B307
1/2"-13
1/2"-13
2 7/16"
7/8"
1 1/8"
2 1/2"
1/2"-13
1/2"-13
1 1/8"
29 mm
Mat'l. Thickness
6 mm
3/8"
10 mm
Design load safety factor of 5.
Cat. No.
B308
19 mm
1/4"
T
F A
3/4"
• Finish available: ZN • For a maximum beam thickness of 3/4" • For thicker beams, step up one flange width size
C D
600 lbs. 2.66 kN 1000 lbs. 4.44 kN
Max. Flange Thick.
B312 Anchor Strap
B
• Finishes available: ZN, HDG • Setscrew included
C
D
2 9/16"
7/8"
E
F
1/8"
1/2"
2
1 1/8"
T
Design Load lbs
kN
11 Ga.
600
2.66
7 Ga.
1100
4.88
7 Ga.
1100
4.88
2 1/2"
1/4"
1500
Cat. No.
Flange Width
6.66
B312-6
Up to 6" 6" - 9" 9" - 12"
B321-1
3/8"-16
1/2"-13
3 9/16"
1 11/16"
1 5/8"
3 1/4"
1/4"
1300
5.77
B312-9
B321-2
1/2"-13
1/2"-13
3 9/16"
1 11/16"
1 5/8"
3 1/4"
1/4"
1400
6.21
B312-12
Beam Clamp Catalog No. B750-J4 B750-J6 B750-J9 B750-J12
B212-3/8
Cable Tray • Steel
Cat. No. Design Load *
B212-1/4
1/2"-13 Rod & Hex Nut Sold Separately
For Flange Width
Wt./C
in.
mm
lbs
kg
3"- 6" 5"- 9" 8"- 12" 11"- 15"
76.2 - 152.4 127.0 - 288.6 203.2 - 304.8 279.4 - 381.0
109 124 135 147
49.4 56.2 61.2 66.7
J-Hook & Hex Nut Included
• Finish available: ZN Material: 7 Gauge (4.6) • Design Load 500 lbs. (2.22 kN) • Recommended torque: 'J'-Hook Nut 125 In.-Lbs. (14.1 kN/m) • Maximum flange thickness of 3/4"
1 1/2"
1 7/8" (47.6)
(38.1)
Beam Clamp Catalog No. B700-J4 B700-J6 B700-J9 B700-J12
'A'
Thread Length 'TL'
Wt./C
in.
mm
in.
mm
lbs
kg
81/2" 111/2" 121/4" 171/2"
215.9 292.1 368.3 444.5
5" 6" 6" 6"
127.0 152.4 152.4 152.4
44 53 63 78
19.9 24.0 28.6 35.4
• Finish available: ZN • Hex Nut included.
Safety Factor of 5.0 on all loads
167
800-851-7415 ext. 366
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Covers
Solid Flanged
Solid Non-Flanged
Peaked Flanged
Ventilated Flanged
A full range of covers is available for straight sections and fittings. Solid covers should be used when maximum enclosure of the cable is desired and no accumulation of heat is expected. Ventilated covers provide an overhead cable shield yet allow heat to escape. B-Line recommends that covers be placed on vertical cable tray runs to a height of 6 ft. (1.83 m) to 8 ft. (2.44 m) above the floor to isolate both cables and personnel. Flanged covers have a 1/2 in. (13 mm) flange. Cover clamps are not included with the cover and must be ordered separately. All peaked covers are flanged. Standard peaked covers have 1/2� peak. Special purpose peaked covers, having a 2 to 3 pitch, provide additional slope and material thickness. The 2 to 3 pitch fitting covers are of multiple piece, welded construction.
Steel Cover Part Numbering Prefix Example: 80 2 P - 20 - 24 - 144
Cover Type 80 = Solid 81 = Ventilated 82 = Peaked
Detail
Material Thickness
*Material
2= Flanged Steel (248, 258, 268 straight sections and all fittings)
P= Pre-Galvanized G= HDGAF
Tray Width
20 = 20 Pre-Galv 18 = 18 HDGAF
3= Flanged Steel (All straight sections except 248, 258, 268)
4= Non-Flanged Steel (80 & 81 type only) (248, 258, 268 straight sections and all fittings.)
06 = 09 = 12 = 18 = 24 = 30 = 36 =
6" 9" 12" 18" 24" 30" 36"
5= Non-Flanged Steel (80 & 81 type only) (All straight sections except 248, 258, 268)
*Stainless steel 304 and 316 available, see engineering catalog CT-01 or visit www.cooperbline.com
Examples of Catalog Numbers for Fitting Covers: Horizontal Bend Cover Prefix Suffix 80 2 P 20 - 18 - 90 HB 24
Prefix
Vertical Bend Cover Suffix
80 2 G 18 - 24 - 90 VO 24 - 4* Side Rail* Height Radius Fitting Angle Width Material Thickness Material Detail Cover Type
Radius Fitting Angle Width Material Thickness Material Detail Cover Type * Required for VO fittings only
www.cooperbline.com
168
Item Description
For Straight Section Covers: Pre-Galvanized Only: 144 = 12 ft. (3.66 m) 120 = 10 ft. (3.05 m) Pre-Galvanized & HDGAF 72 = 6 ft. (1.83 m) 60 = 5 ft. (1.52 m) For fitting covers: Insert suffix of fitting to be covered. See example below.
Series 2,3,4&5 Steel
Long Span
Intermediate Span
Cover Clamps
Quantity of Standard Cover Clamps Required Straight Section 60" or 72"...............4 pcs. Straight Section 120" or 144"............6 pcs
Tees .......................................6 pcs. Crosses .................................8 pcs.
Horizontal/Vertical Bends ..................4 pcs
Raised Cover Clamp
Heavy Duty Cover Clamp
• For indoor service only
• Recommended for outdoor service • (*) Insert P or G Peaked Cover Clamp
† Specify gap of 1", 2", 3" or 4".
Tray Type
Catalog No.
Series 2 Steel Straight Section Series 3 & 4 Steel Straight Section
Side Rail Height
9ZN-9114†
in. mm 9ZN-9115† (‡) Insert tray width † Add P to Catalog No. for 1/2" peaked cover clamp.
All Steel Fittings 9ZN-910†
(Also Series 1 Steel Straight Sections)
Standard Cover Clamp
Cover Joint Strip
• For indoor service only • Sold per piece • (*) Insert ZN or G
• Used to join covers • Plastic • (‡) Insert tray width
Tray Type
Steel
Catalog No.
Side Rail Height in.
mm
4 5
101 127
9(*)-9014 9(*)-9015
6 7
152 178
9(*)-9016 9(*)-9017
169
9(*)-(‡)-9044†
5
127
9(*)-(‡)-9054†
6
152
9(*)-(‡)-9064†
7
178
9(*)-(‡)-9074†
• Sold per piece • (*) Insert P or G
Steel
Catalog No. 99-9980-(‡)
101
Combination Cover and Hold-Down Clamp
Tray Type
Catalog No.
4
Side Rail Height
Catalog No.
in.
mm
4 5
101 127
9(*)-9043 9(*)-9053
6 7
152 178
9(*)-9063 9(*)-9073
800-851-7415 ext. 366
Cable Tray • Steel
Note: When using the Heavy Duty Cover Clamp, only one-half the number of clamps stated above is required.
Series 2,3,4&5 Steel
Intermediate Span
Long Span
Specifications
Section 1- Acceptable Manufacturers 1.01
Manufacturer: Subject to compliance with these specifications, cable tray systems shall be as manufactured by Cooper B-Line, Inc.
Section 2- Cable Tray Sections and Components 2.01
General: Except as otherwise indicated, provide metal cable trays, of types, classes and sizes indicated; with splice plates, bolts, nuts and washers for connecting units. Construct units with rounded edges and smooth surfaces; in compliance with applicable standards; and with the following additional construction features. Cable tray shall be installed according to the latest revision of NEMA VE 2.
2.02
Pre-Galvanized Steel: Straight sections, fitting side rails, rungs, and covers shall be made from structural quality steel meeting the minimum mechanical properties and mill galvanized in accordance with ASTM A653 SS, Grade 33, coating designation G90. Hardware finish shall be electrogalvanized zinc per ASTM B633.
2.03
Hot Dip Galvanized Steel: All side rails, covers, splice plates, and rungs shall be made from structural quality steel meeting the minimum mechanical properties of ASTM A1011 SS, Grade 33 for 14 gauge and heavier, ASTM A1008, Grade 33 Type 2 for 16 gauge and lighter, and shall be hot dip galvanized after fabrication in accordance with ASTM A123. Mill galvanized covers are not acceptable for hot dip galvanized cable tray. Hardware finish shall be chromium zinc per ASTM F-1136-88.
2.04
Ladder Cable Trays shall consist of two longitudinal members (side rails) with transverse members (rungs) welded to the side rails. Rungs shall be spaced [6] [9] [12] inches on center. Rung spacing in radiused fittings shall be industry standard 9" and measured at the center of the tray’s width. No portion of the rungs shall protrude below the bottom plane of the side rails. Each rung must be capable of supporting a 200 lb. concentrated load at the center of the cable tray over and above the cable load with a safety factor of 1.5.
2.05
Ventilated Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated bottom welded to the side rails or rungs spaced 4" on center. The peaks of the corrugated bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers. To provide ventilation in the tray, the valleys of the corrugated bottom shall have 21/4" x 4" rectangular holes punched along the width of the bottom.
2.06
Solid Bottom Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated bottom welded to the side rails or a solid sheet over rungs. The peaks of the corrugated bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers.
2.07
Cable tray loading depth shall be [3] [4] [5] [6] inches per NEMA VE 1.
2.08
Straight sections shall have side rails fabricated as I-beams. Straight sections shall be supplied in standard [12 foot] [24 foot] [10 foot (3 m)] [20 foot (6 m)] lengths.
2.09
Cable tray widths shall be [6] [9] [12] [18] [24] [30] [36] inches or as shown on drawings.
2.10
Splice plates shall be manufactured of high strength steel, meeting the minimum mechanical properties of ASTM A1011 HSLAS, Grade 50, Class 1 and be secured with 8 nuts and bolts per plate. The resistance of fixed splice connections between an adjacent section of tray shall not exceed 0.00033 ohm.
2.11
All fittings must have a minimum radius of [12] [24] [36] [48] inches.
Section 3- Loading Capacities and Testing 3.01
Cable tray shall be capable of carrying a uniformly distributed load of _______ lbs./ft. on a ________ ft. support span with a safety factor of 1.5 when supported as a simple span and tested per NEMA VE 1
5.2.
In addition to the uniformly distributed load the cable tray shall support 200 lbs. concentrated load at midpoint of span. Load and safety factors specified are applicable to both the side rails and rung capacities. Cable tray shall be made to manufacturing tolerances as specified by NEMA.
3.02
Upon request, manufacturer shall provide test reports in accordance with the latest revision of NEMA VE 1 or CSA C22.2 No. 126.
www.cooperbline.com
170
Fiberglass Cable Tray
Short Span
Intermediate Span
Cable Channel & Cable Tray
• Fire Retardant Polyester, Good Corrosion Resistance in Most Environments • Fire Retardant Vinyl Ester, Improved for Extreme Corrosion and Higher Heat Distortion • Zero Halogen Fire Retardant Smoke Generation and Toxicity Designed for Mass Transit and Off-Shore Applications Cable Channel Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. Cable Channel Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 3” Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 3” Horizontal Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 4” Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 4” Horizontal Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 6” Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 6” Horizontal Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 8” Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 8” Horizontal Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg.
171
172 173 174 175 176 177 178 179 180 181 182 183
800-851-7415 ext. 366
Fiberglass Cable Tray
Short Span
Cable Channel Straight Sections Straight Sections Load data was interpolated form CSA testing. FCCN series tested (†) • Loads shown are for 6ft. span with deflection of .7 inches. • •
FCC Fiberglass Cable Channel Ventilated FCCN Fiberglass Cable Channel Non-Ventilated One pair of splice plates included with each straight section. Catalog No. Ventilated Non-Ventilated
Width
Length
in.
mm
ft.
m
(*)-03-120
(*)N-03-120
3
76
10
3
(*)-03-240
(*)N-03-240
3
76
20
6
(*)-04-120
(*)N-04-120
4
101
10
3
(*)-04-240
(*)N-04-240
4
101
20
6
(*)-06-120
(*)N-06-120
6
152
10
3
(*)-06-240
(*)N-06-240
6
152
20
6
(*)-08-120
(*)N-08-120
8
203
10
3
(*)-08-240
(*)N-08-240
8
203
20
6
Height in.
Load†
mm Lbs/Ft kg/m
1
25
8
12
11⁄8
28
12
18
15⁄8
35
58
86
23⁄16
55
87
129
(*) Insert ‘FCC’ for Polyester; insert ‘FCCV’ for Vinyl Ester; insert ‘FCCT’ for Zero Halogen.
Cable Channel Fittings All fittings are of mitered construction with 12" (305) radius.
One pair of splice plates included.
VO
Horizontal
4" series
6" series
8" series
90˚
FCCN-03-90HB12 FCCN-04-90HB12
FCCN-06-90HB12
FCCN-08-90HB12
45˚
FCCN-03-45HB12 FCCN-04-45HB12
FCCN-06-45HB12
FCCN-08-45HB12
Vertical VI
3" series
3" series
4" series
6" series
8" series
90˚
FCCN-03-90V*12
FCCN-04-90V*12
FCCN-06-90V*12
FCCN-08-90V*12
45˚
FCCN-03-45V*12
FCCN-04-45V*12
FCCN-06-45V*12
FCCN-08-45V*12
Notes: * Insert ‘O’ for Vertical Out or ‘I’ for Vertical In. For vinyl ester resin, ‘V’ must be added appropriately to part number. Example FCCVN-04-90HB12 For zero halogen resin, ‘T’ must be added appropriately to part number. Example FCCTN-04-90HB12
One pair of splice plates included.
www.cooperbline.com
172
Fiberglass Cable Tray
Short Span
Intermediate Span
Cable Channel Fittings Horizontal Tees
Horizontal Crosses Catalog No.
in.
mm
Catalog No.
in.
mm
FCCN-03-HT12 FCCN-04-HT12
3 4
75 100
FCCN-03-HX12 FCCN-04-HX12
3 4
75 100
FCCN-06-HT12 FCCN-08-HT12
6 8
150 200
FCCN-06-HX12 FCCN-08-HX12
6 8
150 200
Width
Two pair of splice plates included.
Three pair of splice plates included.
For vinyl ester resin, ‘V’ must be added appropriately to part number. Example: FCCVN-03-HT12 For zero halogen resin, ‘T’ must be added appropriately to part number. Example: FCCTN-03-HT12
For vinyl ester resin, ‘V’ must be added appropriately to part number. Example: FCCVN-03-HX12 For zero halogen resin, ‘T’ must be added appropriately to part number. Example: FCCTN-03-HX12
Width
Cable Channel Splice Plates Splice Plates (pairs)
Expansion Splice Plates (pairs)
Included with tray sections.
Catalog No.
Catalog No.
9F-1013 SS6 Optional 9SS6-1001
Horizontal 90˚ Splice Plates
Horizontal 45˚ Splice Plates
Horizontal 30˚ Splice Plates
(pairs)
(pairs)
(pairs)
Catalog No.
Catalog No.
Catalog No.
9F-1901H SS6
9F-1451H SS6
9F-1301H SS6
Optional 9SS6-1901H
Optional 9SS6-1451H
Optional 9SS6-1301
Vertical 90˚ Splice Plates
Vertical 45˚ Splice Plates
Vertical 30˚ Splice Plates
(pairs)
(pairs)
(pairs)
Catalog No.
Catalog No.
Catalog No.
9F-1901V SS6
9F-1451V SS6
9F-1301V SS6
Optional 9SS6-1901V
Horizontal Adjustable Splice Plates
Vertical Adjustable Splice Plates
Catalog No.
Catalog No.
9F-1023 SS6
9F-1033 SS6 Stainless steel hinge FRP body
Uses 3⁄8 hardware.
Uses 3⁄8 hardware.
Notes: Splice plates included with cable channel sections. Standard hardware for splice plates is 1⁄4" (316SS). Hardware for adjustable splice plates is 3⁄8" (316SS). For vinyl ester resin, ‘V’ must be added appropriately to part number. Example: 9FV-1013 SS6. For zero halogen resin, ‘T’ must be added appropriately to part number. Example 9FT-1013 SS6.
173
800-851-7415 ext. 366
Cable Channel • Fiberglass
9F-1001 SS6
Fiberglass Cable Tray
Short Span
Long Span
Intermediate Span
Numbering System To order a Fiberglass straight section of cable tray, select the appropriate size and material from the charts below and place those symbols in the sequence shown to form the complete catalog number.
Procedure: 1. Select the correct B-Line series Fiberglass tray using the Load Data for straight sections shown on page 174 for 3", page 176 for 4", page 178 for 6" and page 180 for 8” fittings. 2. Select the resin required. Polyester, Vinyl Ester or Zero Halogen 3. The tray prefix is completed by inserting the rung spacing. 4. The fourth box contains the desired width in inches. 5. The fifth box contains the straight section length in inches. Fiberglass 120 [10'] (3m) or 240 [20'] (6m)
Straight Section Catalog Selector Example:
24
F
Series 13 24 36 46 H46 48
09
- 24
- 120
Material
Rung Spacing
F - Fiberglass Polyester Resin FV - Fiberglass Vinyl Ester Resin FT - Zero Halogen
6" 9" 12" 18"
(152) (228) (305) (457)
Width 6" 9" 12" 18" 24" 30" 36"
*See A-2 for Marine Rung option.
Length
(152) (228) (305) (457) (609) (762) (914)
120 [10 ft] 240 [20 ft]
(3m) (6m)
Note: One pair of splice plates with SS6 hardware included.
Additional rung options available, see engineering catalog CT03FRP or visit www.cooperbline.com
Fiberglass Cable Tray
Short Span
Intermediate Span
3” Straight Sections Side Rail Height: 3" (76) (NEMA 2" loading depth) Widths: 6", 9", 12", 18", 24", 30", 36" (152), (228), (305), (457), (609), (762), (914) Rung Spacing: 6", 9", 12" (152), (228), (305) Length: 120" [10' ] (3m) or 240" [20'] (6m) Splice Plates: One pair of splice plates with SS6 (316 Stainless Steel) hardware included. B-Line Series
13F
Safety Factor
NEMA 2" fill
3" (76) 1" (25)
6’
8’
10’
12’
14’
(1.83m)
(2.44m)
(3.05m)
(3.66m)
(4.27m)
Design Load Lbs./Ft. (kg/m)
257 (382)
145 (216)
93 (138)
64 (95)
47 (70)
Deflection in. (mm)
1.3 (33)
2.3 (58)
3.7 (94)
5.3 (134)
7.2 (183)
Deflection Multiplier
0.005
0.016
0.040
0.083
0.153
Span
1.5
Ft. (m)
1" (25)
Loading - NEMA 8C • tested per NEMA FG-1, 12” (228) rung spacing. To obtain deflection at any span length for lighter loads than listed, multiply the load by the deflection multiplier. When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Dimensions shown in parentheses are in millimeters, unless otherwise specified.
www.cooperbline.com
174
Fiberglass Cable Tray
Short Span
Intermediate Span
3” Horizontal Bends All 3" series fittings will be mitered construction with 12" (305) radius.
Mitered Side Rail Construction o
o
12” Radius, 90 and 45 Angles In Vertical and Horizontal Fittings and Reducers 90
o
45
o
One pair of splice plates with SS6 hardware included.
Example:
Height 3"
(101)
3
F
-
Material F - Fiberglass Polyester Resin FV - Fiberglass Vinyl Ester Resin FT - Zero Halogen
24
-
90
HB
Width 6" 9" 12" 18" 24" 30" 36"
24
Angle
(152) (228) (305) (457) (609) (762) (914)
30˚ 45˚ 60˚ 90˚
Type HB HT HX VI VO VT VTU RR LR SR -
Radius
Horizontal Bend Horizontal Tee Horizontal Cross Vertical Inside Bend Vertical Outside Bend Vertical Tee Vertical Tee, Up Right Reducer Left Reducer Straight Reducer
12"
(305)
Notes: Standard rung spacing on fittings is 9" (225). Splice plates with SS6 hardware included.
Dimensions shown in parentheses are in millimeters, unless otherwise specified.
175
800-851-7415 ext. 366
Cable Tray • Fiberglass
Fitting Section Catalog Selector
Fiberglass Cable Tray
Short Span
Intermediate Span
4” Straight Sections
Side Rail Height: 4" (101) (NEMA 3" loading depth) Widths: 6", 9", 12", 18", 24", 30", 36" (152), (228), (305), (457), (609), (762), (914)
11⁄8" (28)
Rung Spacing: 6", 9", 12", 18" (152), (228), (305), (457) Length: 120" [10'] (3m) or 240" [20'] (6m)
NEMA 3"
4" (101)
Splice Plates: One pair of splice plates with SS6 (316 Stainless Steel) hardware included.
B-Line Series
24F
Safety Factor 1.5
1" (25)
6’
8’
10’
12’
(1.83m)
(2.44m)
(3.05m)
(3.66m)
Design Load Lbs./Ft. (kg/m)
627 (933)
353 (525)
226 (336)
157 (233)
Deflection in. (mm)
0.9 (22)
1.5 (39)
2.4 (61)
3.5 (88)
Deflection Multiplier
0.001
0.004
0.011
0.022
Span
Ft. (m)
Tested per current NEMA and CSA standards and testing witnessed by CSA. To obtain deflection at any span length for lighter loads than listed, multiply the load by the deflection multiplier. When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%.
www.cooperbline.com
176
Fiberglass Cable Tray
Short Span
Intermediate Span
4” Horizontal Bends
Molded Side Rail Construction 12” and 24” Radius, o
o
90 and 45 Angles
One pair of splice plates with SS6 hardware included.
In Vertical and Horizontal Fittings
Mitered Side Rail Construction 36” Radius, o
o
90 and 45 Angles In Vertical and Horizontal Fittings and Reducers
Example:
Height 4"
(101)
4
F
-
24
Material F - Fiberglass Polyester Resin FV - Fiberglass Vinyl Ester Resin FT - Zero Halogen
-
90
HB
Width 6" 9" 12" 18" 24" 30" 36"
24
Angle
(152) (228) (305) (457) (609) (762) (914)
30˚ 45˚ 60˚ 90˚
Type HB HT HX VI VO VT VTU RR LR SR -
Radius
Horizontal Bend Horizontal Tee Horizontal Cross Vertical Inside Bend Vertical Outside Bend Vertical Tee Vertical Tee, Up Right Reducer Left Reducer Straight Reducer
12" 24" 36"
(305) (609) (914)
Notes: Standard rung spacing on fittings is 9" (225). Splice plates with SS6 hardware included.
177
800-851-7415 ext. 366
Cable Tray • Fiberglass
Fitting Section Catalog Selector
Fiberglass Cable Tray
Intermediate Span
Long Span
6” Straight Sections 15⁄8" (41)
Side Rail Height: 6" (152) (NEMA 5" loading depth)
NEMA 5" fill
Widths: 6", 9", 12", 18", 24", 30", 36" (152), (228), (305), (457), (609), (762), (914)
6" (152)
Rung Spacing: 6", 9", 12", 18" (152), (228), (305), (457) 1" (25)
Length: 120" [10'] (3m) or 240" [20'] (6m) Splice Plates: One pair of splice plates with SS6 (316 Stainless Steel) hardware included. B-Line Series
36F
Safety Factor
12’
14’
16’
18’
20’
(3.66m)
(4.27m)
(4.87m)
(5.48m)
(6.09m)
Design Load Lbs./Ft. (kg/m)
246 (367)
181 (269)
139 (206)
109 (163)
89 (132)
Deflection in. (mm)
1.5 (38)
2.1 (52)
2.7 (68)
3.4 (86)
4.2 (107)
Deflection Multiplier
0.006
0.011
0.019
0.031
0.047
Span
1.5
Ft. (m)
Tested per current NEMA and CSA standards and testing witnessed by CSA
B-Line Series
46F
Safety Factor
12’
14’
16’
18’
20’
(3.66m)
(4.27m)
(4.87m)
(5.48m)
(6.09m)
Design Load Lbs./Ft. (kg/m)
393 (584)
288 (429)
221 (329)
174 (260)
141 (210)
Deflection in. (mm)
1.8 (46)
2.5 (62)
3.2 (81)
4.1 (103)
5.0 (127)
Deflection Multiplier
0.005
0.009
0.015
0.023
0.035
Span
1.5
Ft. (m)
Tested per current NEMA and CSA standards and testing witnessed by CSA
B-Line Series
Safety Factor
12’
14’
16’
18’
20’
(3.66m)
(4.27m)
(4.87m)
(5.48m)
(6.09m)
Design Load Lbs./Ft. (kg/m)
424 (631)
312 (464)
239 (355)
188 (280)
153 (227)
Deflection in. (mm)
1.9 (50)
2.7 (67)
3.5 (88)
4.4 (111)
5.4 (138)
Deflection Multiplier
0.005
0.009
0.015
0.023
0.035
Design Load Lbs./Ft. (kg/m)
318 (473)
234 (348)
179 (266)
141 (210)
114 (170)
Deflection in. (mm)
1.5 (37)
2.0 (51)
2.6 (66)
3.3 (84)
4.1 (103)
Deflection Multiplier
0.005
0.009
0.015
0.023
0.035
Span
1.5
H46F 2.0
Ft. (m)
Tested per current NEMA and CSA standards and testing witnessed by CSA To obtain deflection at any span length for lighter loads than listed, multiply the load by the deflection multiplier. When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%.
www.cooperbline.com
178
Fiberglass Cable Tray
Intermediate Span
Long Span
6” Horizontal Bends
Molded Side Rail Construction 24” and 36” Radius, o
o
90 and 45 Angles One pair of splice plates with SS6 hardware included.
In Vertical and Horizontal Fittings
Mitered Side Rail Construction 12” Radius, o
o
90 and 45 Angles In Vertical and Horizontal Fittings and Reducers
Example:
Height 6"
(152)
6
F
-
24
Material F - Fiberglass Polyester Resin FV - Fiberglass Vinyl Ester Resin FT - Zero Halogen
-
90
HB
Width 6" 9" 12" 18" 24" 30" 36"
24
Angle
(152) (228) (305) (457) (609) (762) (914)
30˚ 45˚ 60˚ 90˚
Type HB HT HX VI VO VT VTU RR LR SR -
Radius
Horizontal Bend Horizontal Tee Horizontal Cross Vertical Inside Bend Vertical Outside Bend Vertical Tee Vertical Tee, Up Right Reducer Left Reducer Straight Reducer
12" 24" 36"
(305) (609) (914)
Notes: Standard rung spacing on fittings is 9" (225). Splice plates with SS6 hardware included.
179
800-851-7415 ext. 366
Cable Tray • Fiberglass
Fitting Section Catalog Selector
Fiberglass Cable Tray
Long Span
8” Straight Sections
23/16" (55)
Side Rail Height: 8" (203) (NEMA 7" loading depth) Widths: 6", 9", 12", 18", 24", 30", 36" (152), (228), (305), (457), (609), (762), (914) Rung Spacing: 6", 9", 12" (152), (228), (305)
NEMA 7" fill
Length: 120" [10' ] (3m) or 240" [20'] (6m)
8" (203)
Splice Plates: One pair of splice plates with SS6 (316 Stainless Steel) hardware included. Note: NEC allows cable fill calculations on 6" fill maximum.
B-Line Series
48F
Safety Factor
12’
14’
16’
18’
20’
(3.66m)
(4.27m)
(4.88m)
(5.49m)
(6.10m)
Design Load Lbs./Ft. (N/m)
348 (518)
256 (381)
196 (291)
155 (291)
125 (187)
Deflection in. (mm)
1.1 (26.9)
1.4 (36.7)
1.89 (47.9)
2.4 (60.6)
3.0 (74.8)
Deflection Multiplier
0.003
0.006
0.010
0.015
0.024
Span
1.5
Ft. (m)
1" (25)
Loading - NEMA 20C+ • tested per NEMA FG-1, 12" (228) rung spacing. To obtain deflection at any span length for lighter loads than listed, multiply the load by the deflection multiplier. When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%.
www.cooperbline.com
180
Fiberglass Cable Tray
Long Span
8” Horizontal Bends
Mitered Side Rail Construction o
o
12”, 24”, 36” Radius, 90 and 45 Angles In Vertical and Horizontal Fittings and Reducers
Fitting Section Catalog Selector
Height 8"
(152)
8
F
-
24
Material F - Fiberglass Polyester Resin FV - Fiberglass Vinyl Ester Resin FT - Zero Halogen
-
90
Width 6" 9" 12" 18" 24" 30" 36"
HB
24
Angle
(152) (228) (305) (457) (609) (762) (914)
30˚ 45˚ 60˚ 90˚
Type HB HT HX VI VO RR LR SR
-
Radius
Horizontal Bend Horizontal Tee Horizontal Cross Vertical Inside Bend Vertical Outside Bend Right Reducer Left Reducer Straight Reducer
12" 24" 36"
(305) (609) (914)
Notes: Standard rung spacing on fittings is 9" (225). Splice plates with SS6 hardware included.
181
800-851-7415 ext. 366
Cable Tray • Fiberglass
Example:
Fiberglass Cable Tray
Intermediate Span
Short Span
Long Span
Covers Material Thickness: 1⁄8" (3) Cover Length: 10' (3m) Standard Mounting Hardware: (10 each) #10 x 1⁄2" stainless, self drilling screws provided with each section
Covers
F - C - 24 - 120 Length or fitting description Width Rail design Material F FV FT FP FVP FTP
-
C C C C C C
-
24 24 24 24 24 24
-
120 120 120 120 120 120
= = = = = =
Flat polyester Flat vinyl ester Flat zero halogen Peaked polyester Peaked vinyl ester Peaked zero halogen
Peaked Cover provides 5 to 1 pitch
Note: Peaked covers available for straight sections only.
Cover Clamps Standard Cover Clamp
Tray Type
Side Rail Height
Catalog No.
Fiberglass
3" (76) 4" (101) 6" (152)
9F-9013 9F-9014 9F-9016
Heavy Duty Cover Clamp
Peaked Cover Clamp
Recommended for outdoor service. • W = tray width • Heavy duty cover clamp available for flat covers only
• W = tray width
Tray Type Tray Type
Side Rail Height
Catalog No.
3" (76) 4" (101) 6" (152) 8” (203)
9F-W-9034 9F-W-9044 9F-W-9064 9F-W-9084
Fiberglass
Thermo Plastic Drive Rivet
Fiberglass
Quantity of Standard Cover Clamps Required
Shipped in packages of 25 pcs.
Straight Section 60” or 72” ....4 pcs. Straight Section 120” or 144” 6 pcs. Horizontal/Vertical Bends ........4 pcs. Tees ............................................6 pcs. Crosses ....................................8 pcs. Cat. No. TPDR
Note: When using the Heavy Duty Cover Clamp, only one-half the number of clamps stated above is required.
Note: For vinyl ester resin, ‘V’ must be added appropriately to part number. Example: 9FV-9016. For zero halogen resin, ‘T’ must be added appropriately to part number. Example: 9FT-9016. Dimensions shown in parentheses are in millimeters, unless otherwise specified.
www.cooperbline.com
182
Side Rail Height
Catalog No.
3" (76) 4" (101) 6" (152) 8” (203)
9F-W-9034P 9F-W-9044P 9F-W-9064P 9F-W-9084P
Fiberglass Cable Tray
Intermediate Span
Short Span
Long Span
Accessories Part Number with Hardware Explanation 9F-0000* polyester resin
Examples:
or
9FV-0000* vinyl ester resin
or
9FT-0000* zero halogen resin
* indicates that additional information must be furnished to specify the type of hardware Hardware Option 316 Stainless Steel replace * with Example
SS6
Monel
Silicon Bronze
Fiberglass
MO
SB
FR
9F-4003: pair of 4-hole splice plates for 3" (76) system without hardware 9F-4004 SS6: pair of 4-hole splice plates for 4" (101) system with stainless steel hardware 9FV-8006 SB: pair of 8-hole vinyl ester splice plates for 6" (152) system with silicon bronze hardware
Standard Lay-In Splice Plates
Expansion Splice Plate
Included in needed quantities with tray section. • Furnished in pairs • Order only pairs of splice plates needed for field fabrication. • SS6 hardware supplied as standard - use SS6 suffix. • Other hardware available, specify by hardware suffix. Hardware other than SS6 is considered special.
L-shaped, lay-in style
Fiberglass
Height
Material
Fiberglass
Catalog No.
3" (76)
9F-4003*
4" (101)
9F-4004*
6" (152)
9F-8006*
8" (203)
9F-8008*
These plates provide for changes in elevation that do not conform to standard vertical fittings. • Furnished in pairs Material Fiberglass
These plates are used to attach the end of a tray run to a distribution box or control center. • Furnished in pairs
Fiberglass
*
Catalog No.
3" (76)
9F-4053*
4" (101)
9F-4054*
6" (152)
9F-8056*
8" (203)
9F-8058*
Material
This plate forms a closure for any tray that dead ends. • Furnished as one plate • W = tray width
Fiberglass
4" (101)
9F-1084-W*
6" (152)
9F-1086-W*
9F-4023* 9F-4024* 9F-8026* 9F-8028*
Height 3" (76) 4" (101) 6" (152) 8" (203)
Catalog No. 9F-4033* 9F-4034* 9F-8036* 9F-8038*
* hardware suffix needed to complete part number Step Down Plates
Catalog No. 9F-1083-W*
3" (76) 4" (101) 6" (152) 8" (203)
These plates provide for changes in the horizontal direction that do not conform to standard fittings. • Furnished in pairs • Stainless steel hinges, FRP body
Blind End Plate
3" (76)
Catalog No.
Horizontal Adjustable Splice Plates
Fiberglass
Height
Height
hardware suffix needed to complete part number
* hardware suffix needed to complete part number
Material
9F-4013* 9F-4014* 9F-8016* 9F-8018*
Vertical Adjustable Splice Plates
Tray to Box Splice Plates
Height
3" (76) 4" (101) 6" (152) 8" (203)
Catalog No.
* hardware suffix needed to complete part number
* hardware suffix needed to complete part number
Material
Height
These splice plates provide for changes in side rail heights. • Furnished in pairs Material
6" to 3" (152 to 76)
9F-8063* 9F-8064*
4" to 3" (101 to 76)
9F-4043*
*
183
Catalog No.
Fiberglass 6" to 4" (152 to 101)
* hardware suffix needed to complete part number
Height
hardware suffix needed to complete part number
800-851-7415 ext. 366
Cable Tray • Fiberglass
Material
• Furnished in pairs
Fiberglass Cable Tray
Short Span
Intermediate Span
Long Span
Accessories Horizontal and Vertical Splice Plates
Hardware Suffix: SS6 - 316SS MO - Monel SB - Silicon Bronze FR - Fiberglass
* Hardware suffix needed to complete part number All splice plate hardware is 3⁄8 ".
Horizontal Splice Plates • furnished in pairs * hardware suffix needed to complete part number
Catalog No. 90˚
Catalog No. 45˚
Catalog No. 30˚
9F-4903H* 9F-4904H* 9F-8906H* 9F-8908H*
9F-4453H* 9F-4454H* 9F-8456H* 9F-8458H*
9F-4303H* 9F-4304H* 9F-8306H* 9F-8308H*
Vertical Splice Plates • furnished in pairs * hardware suffix needed to complete part number
Notes:
Catalog No. 90˚
Catalog No. 45˚
Catalog No. 30˚
9F-4903V* 9F-4904V* 9F-8906V* 9F-8908V*
9F-4453V* 9F-4454V* 9F-8456V* 9F-8458V*
9F-4303V* 9F-4304V* 9F-8306V* 9F-8308V*
Standard lay-in splice plates with SS6 hardware included with tray sections. Splice Plates are available in pairs and are a separate order item. They are not automatically supplied with tray sections. For vinyl ester resin, ‘V’ must be added appropriately to part number. Example: 9FV-8456HSS6. For zero halogen resin, ‘T’ must be added appropriately to part number. Example: 9FT-8456HSS6.
www.cooperbline.com
184
Fiberglass Cable Tray
Short Span
Intermediate Span
Long Span
Accessories Ladder Drop-Out
Barriers
Specially-designed Ladder Drop-Outs provide a rounded surface with adequate radius to protect cable as it exits from the tray, preventing damage to insulation. • 4" (101) radius Cat. No. 9F-1104 - W
• vinyl ester available 75FV-120 • zero halogen available 75FT-120 • furnished with #10 x 1⁄2" self-drilling stainless steel screws
• W = tray width
Catalog No.
Side rail Height
72F-120 73F-120 75F-120
3" (76) 4" (101) 6" (152)
Flexible Horizontal Barrier Kit Catalog No.
Side rail Height
72F-90HBFL 73F-90HBFL 75F-90HBFL
3" (76) 4" (101) 6" (152)
One kit allows up to a 38" (965) radius position of the barrier. For larger than 38" (965) radius barrier position, two kits are required.
Kit Contents: Note: For vinyl ester resin, ‘V’ must be added appropriately to part number. Example: 75FV-90BFL. 1 pc — 72" (1829) Straight Barrier For zero halogen resin, ‘T’ must be added appropriately to part number. Example: 75FT-90BFL. 4 pc — 9F-9002 Barrier Strip Clip 8 pc — Thermo Plastic Drive Rivet 4 pc — #10 x 3⁄4" Stainless Steel Self-Drilling
Screw Assembly required — directions included.
Additional clips with fasteners (2 thermo plastic drive rivets and 1 #10 x 3⁄4 " Stainless steel self-drilling screw.) • 1 pack contains 4 angle clips and fasteners. Cat. No. PK-BAC
Vertical Barriers 7* F - 90VO24 Radius VI or VO Angle Material Barrier Size
Clamp/Guide - Fiberglass Cat. No. 9F-1208 - nonmetallic • Designed for 3⁄8" hardware - not included • Combination hold down clamp and guide
VO VI
*Insert 2 for 3” side rail height 3 for 4” side rail height 5 for 6” side rail height
Fiberglass Conduit to Cable Tray Adapter • For rigid or PVC conduit • Standard hardware is 316 stainless steel • Add “N” to end of part number if non-metallic hardware is preferred
Resin Seal Kit To reseal fiberglass after field modifications. Catalog No. RSK-010 1 pint (473ml) Contents: Sealant and Applicator.
Resin Seal Kit
Part Size Number 9F*-2008 9F*-2009 9F*-2010 9F*-2011 9F*-2012 9F*-2013 9F*-2014 9F*-2015 9F*-2016
Conduit in. 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 3.50
mm 15 20 25 32 40 50 65 80 90
* Insert “V” for vinyl ester cable tray Insert “T” for zero halogen cable tray
185
800-851-7415 ext. 366
Cable Tray • Fiberglass
Barrier Mounting Angle Clips with Fasteners
Miscellaneous Notes
www.cooperbline.com
186
Miscellaneous Notes
187
800-851-7415 ext. 366
Index Aluminum Cable Channel Channel
Fittings
ACC-03 Series . . . . . . . . . . . . . . . . . . . . . . . . . 17 ACC-04 Series . . . . . . . . . . . . . . . . . . . . . . . . . 17 ACC-06 Series . . . . . . . . . . . . . . . . . . . . . . . . . 17 ACCN-03 Series . . . . . . . . . . . . . . . . . . . . . . . 17 ACCN-04 Series . . . . . . . . . . . . . . . . . . . . . . . 17 ACCN-06 Series . . . . . . . . . . . . . . . . . . . . . . . 17
ACC-03-xxHBxx Series . . . . . . . . . . . . . . . ACC-03-xxHTxx Series . . . . . . . . . . . . . . . ACC-03-xxHXxx Series . . . . . . . . . . . . . . . ACC-03-xxVIxx Series . . . . . . . . . . . . . . . . ACC-03-xxVOxx Series . . . . . . . . . . . . . . . ACC-04-xxHBxx Series . . . . . . . . . . . . . . . ACC-04-xxHTxx Series . . . . . . . . . . . . . . . ACC-04-xxHXxx Series . . . . . . . . . . . . . . . ACC-04-xxVIxx Series . . . . . . . . . . . . . . . . ACC-04-xxVOxx Series . . . . . . . . . . . . . . . ACC-06-xxHBxx Series . . . . . . . . . . . . . . . ACC-06-xxHTxx Series . . . . . . . . . . . . . . . ACC-06-xxHXxx Series . . . . . . . . . . . . . . . ACC-06-xxVIxx Series . . . . . . . . . . . . . . . . ACC-06-xxVOxx Series . . . . . . . . . . . . . . . ACCN-03-xxHBxx Series . . . . . . . . . . . . . . ACCN-03-xxHTxx Series . . . . . . . . . . . . . . ACCN-03-xxHXxx Series . . . . . . . . . . . . . . ACCN-03-xxVIxx Series . . . . . . . . . . . . . . . ACCN-03-xxVOxx Series . . . . . . . . . . . . . ACCN-04-xxHBxx Series . . . . . . . . . . . . . . ACCN-04-xxHTxx Series . . . . . . . . . . . . . . ACCN-04-xxHXxx Series . . . . . . . . . . . . . . ACCN-04-xxVIxx Series . . . . . . . . . . . . . . . ACCN-04-xxVOxx Series . . . . . . . . . . . . . ACCN-06-xxHBxx Series . . . . . . . . . . . . . . ACCN-06-xxHTxx Series . . . . . . . . . . . . . . ACCN-06-xxHXxx Series . . . . . . . . . . . . . . ACCN-06-xxVIxx Series . . . . . . . . . . . . . . . ACCN-06-xxVOxx Series . . . . . . . . . . . . .
Connectors ACC-03-90HC . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-03-90VC . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-03-HTC . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-03-HXC . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-03-PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-04-90HC . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-04-90VC . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-04-HTC . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-04-HXC . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-04-PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-06-90HC . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-06-90VC . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-06-HTC . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-06-HXC . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ACC-06-PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Accessories 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19
Covers 808A40-03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 808A40-03 (Fitting Style) . . . . . . . . . . . . . . 22 808A40-04 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 808A40-04 (Fitting Style) . . . . . . . . . . . . . . 22 808A40-06 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 808A40-06 (Fitting Style) . . . . . . . . . . . . . . 22
www.cooperbline.com
188
9A-1043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1044-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 99-1125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9(ZN, G)-1231-3 . . . . . . . . . . . . . . . . . . . . . . . 21 9(ZN, G)-1231-4 . . . . . . . . . . . . . . . . . . . . . . . 21 9(ZN, G)-1231-6 . . . . . . . . . . . . . . . . . . . . . . . 21 9(ZN, G)-1232-3 . . . . . . . . . . . . . . . . . . . . . . . 21 9(ZN, G)-1232-4 . . . . . . . . . . . . . . . . . . . . . . . 21 9(ZN, G)-1232-6 . . . . . . . . . . . . . . . . . . . . . . . 21 9A-1237-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1237-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1237-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1243 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9A-1244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9A-1245 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9A-1246 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9A-1261-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1261-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1261-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1543 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1544 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1546 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1583 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1584 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1586 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1643 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1644 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1646 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1743 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1744 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1746 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1843 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1863 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-1864 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9A-3305-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9A-3305-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9A-3305-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9A-9023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 9A-9024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 9A-9033 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 9A-9034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 9A-9036 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 B185CCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 B409-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 B409-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Index
Cent-R-Rail 速 Tray C0A1H Series C0A2M Series C0A2V Series C0A3M Series C0A3V Series C0A4M Series C0A4V Series C0A5V Series C0A6V Series C0ADB Series C0ADT Series C2A2V Series C2A3V Series C2A4V Series C2A5V Series C2A6V Series C3A1H Series C3A2M Series C3A3M Series C3A4M Series C3ADB Series C3ADT Series C4A1H Series C4A2M Series C4A3M Series C4A4M Series C4ADB Series C4ADT Series C6A1H Series C6ADB Series C6ADT Series
Accessories 30 32 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . 30 . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . 30 . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . 30 . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 .......................... .........................
Covers CAK1F-DB Series CAK1F-DT Series CAP1F-DB Series CAP1F-DT Series
..................... ..................... ..................... .....................
62 62 62 62
B101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 B107 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 B107-22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 B110AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 B202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 B281ASQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 B370 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 B381 thru B385 . . . . . . . . . . . . . . . . . . . . . . . . 46 B450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 B594 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 B1400 thru B1490 . . . . . . . . . . . . . . . . . . . . . 54 BL1400-C442 thru BL1450-C442 . . . . 55 C73A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 C73A-90HBFL . . . . . . . . . . . . . . . . . . . . . . . . . 61 C74A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 C74A-90HBFL . . . . . . . . . . . . . . . . . . . . . . . . . 61 C76A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 C76A-90HBFL . . . . . . . . . . . . . . . . . . . . . . . . . 61 CAB-U10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 CAB-U20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 CAB-U25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 CAC-HTDxxB Series . . . . . . . . . . . . . . . . . . 37 CAC-HTHxxB Series . . . . . . . . . . . . . . . . . . 38 CAC-HTMxxB Series . . . . . . . . . . . . . . . . . . 38 CAC-HTVxxB Series . . . . . . . . . . . . . . . . . . 37 CAC-HXDxxB Series . . . . . . . . . . . . . . . . . . 39 CAC-HXVxxB Series . . . . . . . . . . . . . . . . . . 39 CAC-OHxxxB Series . . . . . . . . . . . . . . . . . . 35 CAC-OVxxxB Series . . . . . . . . . . . . . . . . . . 35 CAC-UFB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 CAC-VB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 CAL-D Series . . . . . . . . . . . . . . . . . . . . . . . . . . 51 CAL-V2 Series . . . . . . . . . . . . . . . . . . . . . . . . . 51 CAM-BE1B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 CAM-BE1T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 CAM-BE2M Series . . . . . . . . . . . . . . . . . . . . 60 CAM-BE2V Series . . . . . . . . . . . . . . . . . . . . . 60 CAM-BE3M Series . . . . . . . . . . . . . . . . . . . . 60 CAM-BE3V Series . . . . . . . . . . . . . . . . . . . . . 60 CAM-BE4M Series . . . . . . . . . . . . . . . . . . . . 60 CAM-BE4V Series . . . . . . . . . . . . . . . . . . . . . 60 CAM-BEDB Series . . . . . . . . . . . . . . . . . . . . 59 CAM-BEDT Series . . . . . . . . . . . . . . . . . . . . . 59 CAM-DF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 CAM-DO Series . . . . . . . . . . . . . . . . . . . . . . . . 50 CAM-EC10B . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 CAM-EC20B . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 CAM-GJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 CAM-PR Series . . . . . . . . . . . . . . . . . . . . . . . . 42 CAM-VDO Series . . . . . . . . . . . . . . . . . . . . . . 50 CAP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 CAR-1M Series . . . . . . . . . . . . . . . . . . . . . . . . 32 CAR-1V Series . . . . . . . . . . . . . . . . . . . . . . . . . 28 CAR-2M Series . . . . . . . . . . . . . . . . . . . . . . . . 32 CAR-2V Series . . . . . . . . . . . . . . . . . . . . . . . . . 28 CAR-H0 Series . . . . . . . . . . . . . . . . . . . . . . . . 36 CAR-H3 Series . . . . . . . . . . . . . . . . . . . . . . . . 36 CAR-H4 Series . . . . . . . . . . . . . . . . . . . . . . . . 36 CAR-H6 Series . . . . . . . . . . . . . . . . . . . . . . . . 36
189
CAS-HB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CAS-NG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 CAS-SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 CAS-VB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 CAT-B1H Series . . . . . . . . . . . . . . . . . . . . . . . 58 CAT-B2M Series . . . . . . . . . . . . . . . . . . . . . . . 58 CAT-B2VxxB Series . . . . . . . . . . . . . . . . . . . 57 CAT-B3M Series . . . . . . . . . . . . . . . . . . . . . . . 58 CAT-B3VxxB Series . . . . . . . . . . . . . . . . . . . 57 CAT-B4M Series . . . . . . . . . . . . . . . . . . . . . . . 58 CAT-B4VxxB Series . . . . . . . . . . . . . . . . . . . 57 CAT-B5VxxB Series . . . . . . . . . . . . . . . . . . . 57 CAT-B6VxxB Series . . . . . . . . . . . . . . . . . . . 57 CAT-BDB Series . . . . . . . . . . . . . . . . . . . . . . . 57 CAT-BDT Series . . . . . . . . . . . . . . . . . . . . . . . 57 CAT-WB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 CPB-CVI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 CPB-U10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 CPL-D Series . . . . . . . . . . . . . . . . . . . . . . . . . . 51 CPLM-EC10 Series . . . . . . . . . . . . . . . . . . . . 52 CPLM-EC20 Series . . . . . . . . . . . . . . . . . . . . 53 CPLM-EC30 Series . . . . . . . . . . . . . . . . . . . . 53 CPLM-EC40 Series . . . . . . . . . . . . . . . . . . . . 53 CPLM-EC50 Series . . . . . . . . . . . . . . . . . . . . 54 CPLM-RCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 CPL-V2 Series . . . . . . . . . . . . . . . . . . . . . . . . . 51 CPP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 CSA4V Series . . . . . . . . . . . . . . . . . . . . . . . . . . 28 CZN-DRS Series . . . . . . . . . . . . . . . . . . . . . . 49 CZNH-CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 CZNH-CD-5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . 44 CZNH-CD-I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 CZNH-CV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 CZNH-CV-5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 CZNH-CV-I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 CZNH-WH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 CZNH-WM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 CZNM-CA1L Series . . . . . . . . . . . . . . . . . . . 55 CZNM-CA1S Series . . . . . . . . . . . . . . . . . . . 55 CZNM-CA2L Series . . . . . . . . . . . . . . . . . . . 55 CZNM-CA2S Series . . . . . . . . . . . . . . . . . . . 55 CZNM-CA3L Series . . . . . . . . . . . . . . . . . . . 55 CZNM-CA3S Series . . . . . . . . . . . . . . . . . . . 55 CZNM-RC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 CZNT-WB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 CZNT-WB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 SB-2133-CR . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 SC228 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 U2A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 U3A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 U4A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 U6A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
800-851-7415 ext. 366
Index Redi-Rail™ Tray H13A Series H14A Series H15A Series H16A Series H17A Series
69 71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 ............................ ............................
Fittings H14AR04 Series . . . . . . . . . . . . . . . . . . . . . . . H14AR-xx-xxHB Series . . . . . . . . . . . . . . . H14AR-xx-xxHT Series . . . . . . . . . . . . . . . . H14AR-xx-xxHX Series . . . . . . . . . . . . . . . H14AR-xx-xxVI Series . . . . . . . . . . . . . . . . H14AR-xx-xxVO Series . . . . . . . . . . . . . . . H14AR-xx-xxVT Series . . . . . . . . . . . . . . . . H14ARSB Series . . . . . . . . . . . . . . . . . . . . . . H15AR04 Series . . . . . . . . . . . . . . . . . . . . . . . H15AR-xx-xxHB Series . . . . . . . . . . . . . . . H15AR-xx-xxHT Series . . . . . . . . . . . . . . . . H15AR-xx-xxHX Series . . . . . . . . . . . . . . . H15AR-xx-xxVI Series . . . . . . . . . . . . . . . . H15AR-xx-xxVO Series . . . . . . . . . . . . . . . H15AR-xx-xxVT Series . . . . . . . . . . . . . . . . H15ARSB Series . . . . . . . . . . . . . . . . . . . . . . H16AR04 Series . . . . . . . . . . . . . . . . . . . . . . . H16AR-xx-xxHB Series . . . . . . . . . . . . . . . H16AR-xx-xxHT Series . . . . . . . . . . . . . . . . H16AR-xx-xxHX Series . . . . . . . . . . . . . . . H16AR-xx-xxVI Series . . . . . . . . . . . . . . . . H16AR-xx-xxVO Series . . . . . . . . . . . . . . . H16AR-xx-xxVT Series . . . . . . . . . . . . . . . . H16ARSB Series . . . . . . . . . . . . . . . . . . . . . . H17AR04 Series . . . . . . . . . . . . . . . . . . . . . . . H17AR-xx-xxHB Series . . . . . . . . . . . . . . . H17AR-xx-xxHT Series . . . . . . . . . . . . . . . . H17AR-xx-xxHX Series . . . . . . . . . . . . . . . H17AR-xx-xxVI Series . . . . . . . . . . . . . . . . H17AR-xx-xxVO Series . . . . . . . . . . . . . . . H17AR-xx-xxVT Series . . . . . . . . . . . . . . . . H17ARSB Series . . . . . . . . . . . . . . . . . . . . . .
72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72
Covers 881A40 Series . . . . . . . . . . . . . . . . . . . . . . . . . 69 881A40 (Fitting Style) Series . . . . . . . . . 69 887A40 Series . . . . . . . . . . . . . . . . . . . . . . . . . 78 887A40 (Fitting Style) Series . . . . . . . . . 78
Accessories 99-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 9(ZN, G)-1158 Series . . . . . . . . . . . . . . . . . . 74 9ZN-1204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 9ZN-1204NB . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 9ZN-1420NB . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 9ZN-5106 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74,80 9ZN-5106-WB . . . . . . . . . . . . . . . . . . . . . . 74,80 9ZN-5109 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74,80 9ZN-5109-WB . . . . . . . . . . . . . . . . . . . . . . 74,80 9ZN-5112 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74,80 9ZN-5112-WB . . . . . . . . . . . . . . . . . . . . . . 74,80
www.cooperbline.com
9ZN-5118 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74,80 9ZN-5118-WB . . . . . . . . . . . . . . . . . . . . . . 74,80 9ZN-5124 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74,80 9ZN-5124-WB . . . . . . . . . . . . . . . . . . . . . . 74,80 9(A, ZN)-9012 . . . . . . . . . . . . . . . . . . . . . . . . . . 78 9ZN-LV1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 9ZN-LV1A-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 9ZN-MB1-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 9ZN-MB1-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 9A-R06RK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R06SBERK . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R09RK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R09SBERK . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R12RK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R12SBERK . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R18RK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R18SBERK . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R24RK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R24SBERK . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R30RK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R30SBERK . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R36RK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R36SBERK . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-R002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 9A-R003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R033 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R035 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R036 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-xx-R044 Series . . . . . . . . . . . . . . . . . . . . 78 9A-R045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R047 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R053 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-xx-R054 Series . . . . . . . . . . . . . . . . . . . . 78 9A-R054 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R056 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R057 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R061 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R062 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R063 Series . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-xx-R064 Series . . . . . . . . . . . . . . . . . . . . 78 9A-R064 Series . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R065 Series . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R066 Series . . . . . . . . . . . . . . . . . . . . . . . . 73
190
9A-R067 Series . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R073 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-xx-R074 Series . . . . . . . . . . . . . . . . . . . . 78 9A-R074 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R075 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R076 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R077 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R083 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R084 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R085 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R086 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R087 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R104 Series . . . . . . . . . . . . . . . . . . . . . . . . 74 9ZN-R238 . . . . . . . . . . . . . . . . . . . . . . . . . . . 74,80 9SS-R238 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 9(ZN, SS)-R250 . . . . . . . . . . . . . . . . . . . . . . . . 74 9A-R964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R965 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R966 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-R967 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 9A-RFM-12RK . . . . . . . . . . . . . . . . . . . . . . . . . 81 9A-RFM-24RK . . . . . . . . . . . . . . . . . . . . . . . . . 81 9A-RFM-36RK . . . . . . . . . . . . . . . . . . . . . . . . . 81 9A-RR2RR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 9A-SR0406 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-SR0409 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-SR0506 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 9A-SR0509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 72AR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 72AR-90HBFL Series . . . . . . . . . . . . . . . . . 77 73AR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 73AR-90HBFL Series . . . . . . . . . . . . . . . . . 77 73AR-xxVIxx Series . . . . . . . . . . . . . . . . . . . 77 73AR-xxVOxx Series . . . . . . . . . . . . . . . . . . 77 74AR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 74AR-90HBFL Series . . . . . . . . . . . . . . . . . 77 74AR-xxVIxx Series . . . . . . . . . . . . . . . . . . . 77 74AR-xxVOxx Series . . . . . . . . . . . . . . . . . . 77 75AR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 75AR-90HBFL Series . . . . . . . . . . . . . . . . . 77 75AR-xxVIxx Series . . . . . . . . . . . . . . . . . . . 77 75AR-xxVOxx Series . . . . . . . . . . . . . . . . . . 77 76AR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 76AR-90HBFL Series . . . . . . . . . . . . . . . . . 77 76AR-xxVIxx Series . . . . . . . . . . . . . . . . . . . 77 76AR-xxVOxx Series . . . . . . . . . . . . . . . . . . 77 BAX-4-16 . . . . . . . . . . . . . . . . . . . . . . .75 BAX-4-16-24 . . . . . . . . . . . . . . . . . . . .75 BAX-4-16-32 . . . . . . . . . . . . . . . . . . . .75 BAX-4-16-48 . . . . . . . . . . . . . . . . . . . .75 B1400 thru B1430 . . . . . . . . . . . . . . . . . . . . . 74 U2A-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 U3A-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 U4A-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 U5A-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 U6A-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 UR(2,3,4,5,6)A-06 . . . . . . . . . . . . . . . . . . . . . 79 UR(2,3,4,5,6)ASB-06 . . . . . . . . . . . . . . . . . . 79 UR(2,3,4,5,6)ASB-09 . . . . . . . . . . . . . . . . . . 79 UR(2,3,4,5,6)ASB-12 . . . . . . . . . . . . . . . . . . 79 UR(2,3,4,5,6)ASB-18 . . . . . . . . . . . . . . . . . . 79 UR(2,3,4,5,6)ASB-24 . . . . . . . . . . . . . . . . . . 79
Index Aluminum Series 2, 3 & 4 Cable Tray Tray 24A Series . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85 25A Series . . . . . . . . . . . . . . . . . . . . . . . . . 86, 87 26A Series . . . . . . . . . . . . . . . . . . . . . . . . . 88, 89 34A Series . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85 35A Series . . . . . . . . . . . . . . . . . . . . . . . . . 86, 87 36A Series . . . . . . . . . . . . . . . . . . . . . . . . . 88, 89 37A Series . . . . . . . . . . . . . . . . . . . . . . . . . 90, 91 46A Series . . . . . . . . . . . . . . . . . . . . . . . . . 88, 89 47A Series . . . . . . . . . . . . . . . . . . . . . . . . . 90, 91 57A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 H46A Series . . . . . . . . . . . . . . . . . . . . . . . 88, 89 H47A Series . . . . . . . . . . . . . . . . . . . . . . . 90, 91 S8A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Fittings (4, 5, 6, 7)A-xx-xxCSF Series . . . . . . . . (4, 5, 6, 7)A-xx-xxHB Series . . . . . . . . . . (4, 5, 6, 7)A-xx-xxHT Series . . . . . . . . . . (4, 5, 6, 7)A-xx-xxHX Series . . . . . . . . . . (4, 5, 6, 7)A-xx-xxHYL Series . . . . . . . . . (4, 5, 6, 7)A-xx-xxHYR Series . . . . . . . . (4, 5, 6, 7)A-xx-xxVI Series . . . . . . . . . . . (4, 5, 6, 7)A-xx-xxVO Series . . . . . . . . . . (4, 5, 6, 7)A-xx-xxVT Series . . . . . . . . . . (4, 5, 6, 7)A-xx-xxVTU Series . . . . . . . . 4AST-xx (Fitting) Series . . . . . . . . . . . . . . . 4AVT-xx (Fitting) Series . . . . . . . . . . . . . . . 5AST-xx (Fitting) Series . . . . . . . . . . . . . . . 5AVT-xx (Fitting) Series . . . . . . . . . . . . . . . 6AST-xx (Fitting) Series . . . . . . . . . . . . . . . 6AVT-xx (Fitting) Series . . . . . . . . . . . . . . . 7AST-xx (Fitting) Series . . . . . . . . . . . . . . . 7AVT-xx (Fitting) Series . . . . . . . . . . . . . . .
93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93
Covers 806A40 806A40 807A40 807A40 816A40 816A40 817A40 817A40 826A40 826A40 827A40 827A40
Series (Fitting Series (Fitting Series (Fitting Series (Fitting Series (Fitting Series (Fitting
103 103 . . . . . . . . . . . . . . . . . . . . . . . . 103 Style) Series . . . . . . . . 103 . . . . . . . . . . . . . . . . . . . . . . . . 103 Style) Series . . . . . . . . 103 . . . . . . . . . . . . . . . . . . . . . . . . 103 Style) Series . . . . . . . . 103 . . . . . . . . . . . . . . . . . . . . . . . . 103 Style) Series . . . . . . . . 103 . . . . . . . . . . . . . . . . . . . . . . . . 103 Style) Series . . . . . . . . 103 ........................
Style) Series
........
Accessories 99-PE34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 99-NY36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 99-40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 9A-xx-9P44 . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 9A-xx-9P54 . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 9A-xx-9P64 . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 9A-xx-9P74 . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
99-NP240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 9A-1004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-1004-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-1005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-1005-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-1006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-1007-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-1007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-1007-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-1014 thru 9A-1017 . . . . . . . . . . . . . . . . . 94 9A-1024 thru 9A-1027 . . . . . . . . . . . . . . . . . 94 9A-1034 thru 9A-1037 . . . . . . . . . . . . . . . . . 94 9A-1034-12 thru 9A-1037-12 . . . . . . . . . . 94 9A-1034-36 thru 9A-1037-37 . . . . . . . . . 94 9A-1045 thru 9A-1047 . . . . . . . . . . . . . . . . . 94 9A-1054 thru 9A-1057 . . . . . . . . . . . . . . . . . 95 9A-1060 thru 9A-1062 . . . . . . . . . . . . . . . . . 94 9A-1064 thru 9A-1067 Series . . . . . . . . . 95 9A-1074 thru 9A-1077 Series . . . . . . . . . 95 9A-1084 thru 9A-1087 Series . . . . . . . . . 95 9A-1104 Series . . . . . . . . . . . . . . . . . . . . . . . . 96 9A-1104T Series . . . . . . . . . . . . . . . . . . . . . . . 96 99-1124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 9ZN-1150 Series . . . . . . . . . . . . . . . . . . . . . . . 95 9ZN-1155 Series . . . . . . . . . . . . . . . . . . . . . . . 95 9(ZN, G)-1158 Series . . . . . . . . . . . . . . . . . . 95 9ZN-1204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 9ZN-1204NB . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 9(A, ZN, G, SS)-1205 . . . . . . . . . . . . . . . . . 98 9ZN-1208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 9ZN-1208NB . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 9A-1224 thru 9A-1227 . . . . . . . . . . . . . . . 101 9A-1240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 9(ZN, SS4, SS6)-1241 . . . . . . . . . . . . . . . 101 9(ZN, SS4, SS6)-1242 . . . . . . . . . . . . . . . 101 9(ZN, G)-1249 . . . . . . . . . . . . . . . . . . . . . . . . . 98 9(ZN, G)-1249HD . . . . . . . . . . . . . . . . . . . . . . 98 99-1620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 9A-2044 thru 9A-2047 . . . . . . . . . . . . . . . . . 94 99-2125-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 9A-2130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 9(ZN, SS4)-2351 . . . . . . . . . . . . . . . . . . . . . . . 97 9(ZN, SS4)-2352 . . . . . . . . . . . . . . . . . . . . . . . 97 9ZN-5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 9ZN-5212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 9ZN-5224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 9(ZN, G)-5324 thru 9(ZN, G)-5327 . . . 97 9G-5500-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 9(P, G)-55xx-22SH Series . . . . . . . . . . . . 99 9(GRN, G)-55xx-22SHA Series . . . . . . . 99 9A-6006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9A-6007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 9ZN-9002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 9(A, ZN)-9012 . . . . . . . . . . . . . . . . . . . . . . . . 104 9P-9043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 9A-xx-9044 Series . . . . . . . . . . . . . . . . . . . 104 9P-9053 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 9A-xx-9054 Series . . . . . . . . . . . . . . . . . . . 104 9P-9063 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 9A-xx-9064 Series . . . . . . . . . . . . . . . . . . . 104 9P-9073 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
191
9A-xx-9074 Series . . . . . . . . . . . . . . . . . . . 104 9ZN-9112 Series . . . . . . . . . . . . . . . . . . . . . 104 9ZN-9113 Series . . . . . . . . . . . . . . . . . . . . . 104 99-9980 Series . . . . . . . . . . . . . . . . . . . . . . . 104 99-9982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 73A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 73A-90HBFL . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 73A-xxVIxx Series . . . . . . . . . . . . . . . . . . . . . 96 73A-xxVOxx Series . . . . . . . . . . . . . . . . . . . . 96 74A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 74A-90HBFL . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 74A-xxVIxx Series . . . . . . . . . . . . . . . . . . . . . 96 74A-xxVOxx Series . . . . . . . . . . . . . . . . . . . . 96 75A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 75A-90HBFL . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 75A-xxVIxx Series . . . . . . . . . . . . . . . . . . . . . 96 75A-xxVOxx Series . . . . . . . . . . . . . . . . . . . . 96 76A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 76A-90HBFL . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 76A-xxVIxx Series . . . . . . . . . . . . . . . . . . . . . 96 76A-xxVOxx Series . . . . . . . . . . . . . . . . . . . . 96 ATR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 B212-1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B212-3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B297-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B297-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B297-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B297-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B297-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B297-42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B305 thru B308 . . . . . . . . . . . . . . . . . . . . . . . 102 B312-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B312-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B312-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B321-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B321-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B355 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B409-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B409-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B409-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B409UF-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B409UF-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 B441-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B441-22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 B494-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 B494-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 B494-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 B494-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 B494-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 B494-42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 B494-48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 B655 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 B700-Jx Series . . . . . . . . . . . . . . . . . . . . . . . 102 B750-Jx Series . . . . . . . . . . . . . . . . . . . . . . . 102 BPxxxSS Series . . . . . . . . . . . . . . . . . . . . . . . 97 SFHN3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 SNCB3/8x3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
800-851-7415 ext. 366
Index Steel Cable Channel Channel GCC-03 Series . . . . . . . . . . . . . . . . . . . . . . . GCC-04 Series . . . . . . . . . . . . . . . . . . . . . . . GCC-05 Series . . . . . . . . . . . . . . . . . . . . . . . GCCN-03 Series . . . . . . . . . . . . . . . . . . . . . GCCN-04 Series . . . . . . . . . . . . . . . . . . . . . GCCN-05 Series . . . . . . . . . . . . . . . . . . . . . PCC-03 Series . . . . . . . . . . . . . . . . . . . . . . . PCC-04 Series . . . . . . . . . . . . . . . . . . . . . . . PCC-05 Series . . . . . . . . . . . . . . . . . . . . . . . PCCN-03 Series . . . . . . . . . . . . . . . . . . . . . . PCCN-04 Series . . . . . . . . . . . . . . . . . . . . . . PCCN-05 Series . . . . . . . . . . . . . . . . . . . . . . (SS4, SS6)CC-03 Series . . . . . . . . . . . . (SS4, SS6)CC-04 Series . . . . . . . . . . . . (SS4, SS6)CC-05 Series . . . . . . . . . . . . (SS4, SS6)CCN-03 Series . . . . . . . . . . (SS4, SS6)CCN-04 Series . . . . . . . . . . (SS4, SS6)CCN-05 Series . . . . . . . . . .
Fittings 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107
Connectors GCC-03-90HC Series . . . . . . . . . . . . . . . . GCC-03-90VC Series . . . . . . . . . . . . . . . . GCC-03-HTC Series . . . . . . . . . . . . . . . . . GCC-03-HXC Series . . . . . . . . . . . . . . . . . GCC-03-PC Series . . . . . . . . . . . . . . . . . . . GCC-04-90HC Series . . . . . . . . . . . . . . . . GCC-04-90VC Series . . . . . . . . . . . . . . . . GCC-04-HTC Series . . . . . . . . . . . . . . . . . GCC-04-HXC Series . . . . . . . . . . . . . . . . . GCC-04-PC Series . . . . . . . . . . . . . . . . . . . GCC-06-90HC Series . . . . . . . . . . . . . . . . GCC-06-90VC Series . . . . . . . . . . . . . . . . GCC-06-HTC Series . . . . . . . . . . . . . . . . . GCC-06-HXC Series . . . . . . . . . . . . . . . . . GCC-06-PC Series . . . . . . . . . . . . . . . . . . .
www.cooperbline.com
108 108 108 108 108 108 108 108 108 108 108 108 108 108 108
Accessories
(G,SS4,SS6)CC-03-xxHBxx Series . . . . (G,SS4,SS6)CC-03-xxHTxx Series . . . . (G,SS4,SS6)CC-03-xxHXxx Series . . . . (G,SS4,SS6)CC-03-xxVIxx Series . . . . . (G,SS4,SS6)CC-03-xxVOxx Series . . . . (G,SS4,SS6)CC-04-xxHBxx Series . . . . (G,SS4,SS6)CC-04-xxHTxx Series . . . . (G,SS4,SS6)CC-04-xxHXxx Series . . . . (G,SS4,SS6)CC-04-xxVIxx Series . . . . . (G,SS4,SS6)CC-04-xxVOxx Series . . . . (G,SS4,SS6)CC-06-xxHBxx Series . . . . (G,SS4,SS6)CC-06-xxHTxx Series . . . . (G,SS4,SS6)CC-06-xxHXxx Series . . . . (G,SS4,SS6)CC-06-xxVIxx Series . . . . . (G,SS4,SS6)CC-06-xxVOxx Series . . . . (G,SS4,SS6)CCN-03-xxHBxx Series . . (G,SS4,SS6)CCN-03-xxHTxx Series . . . (G,SS4,SS6)CCN-03-xxHXxx Series . . (G,SS4,SS6)CCN-03-xxVIxx Series . . . . (G,SS4,SS6)CCN-03-xxVOxx Series . . (G,SS4,SS6)CCN-04-xxHBxx Series . . (G,SS4,SS6)CCN-04-xxHTxx Series . . . (G,SS4,SS6)CCN-04-xxHXxx Series . . (G,SS4,SS6)CCN-04-xxVIxx Series . . . . (G,SS4,SS6)CCN-04-xxVOxx Series . . (G,SS4,SS6)CCN-06-xxHBxx Series . . (G,SS4,SS6)CCN-06-xxHTxx Series . . . (G,SS4,SS6)CCN-06-xxHXxx Series . . (G,SS4,SS6)CCN-06-xxVIxx Series . . . . (G,SS4,SS6)CCN-06-xxVOxx Series . .
109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109
Covers 808G18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 808P20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 808SS420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 808SS620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
192
9(G, P, SS4, SS6)-1043 . . . . . . . . . . . . . . 110 9(G, P, SS4, SS6)-1044 . . . . . . . . . . . . . . 110 9(G, P, SS4, SS6)-1044-6 . . . . . . . . . . . 110 99-1125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 9(G, P, SS4, SS6)-1237-3 . . . . . . . . . . . 110 9(G, P, SS4, SS6)-1237-4 . . . . . . . . . . . 110 9(G, P, SS4, SS6)-1237-6 . . . . . . . . . . . 110 9(ZN, G)-1231-3 . . . . . . . . . . . . . . . . . . . . . . 111 9(ZN, G)-1231-4 . . . . . . . . . . . . . . . . . . . . . . 111 9(ZN, G)-1231-6 . . . . . . . . . . . . . . . . . . . . . . 111 9(ZN, G)-1232-3 . . . . . . . . . . . . . . . . . . . . . . 111 9(ZN, G)-1232-4 . . . . . . . . . . . . . . . . . . . . . . 111 9(ZN, G)-1232-6 . . . . . . . . . . . . . . . . . . . . . . 111 9(G, ZN, SS4, SS6)-1243 . . . . . . . . . . . . 111 9(G, ZN, SS4, SS6)-1244 . . . . . . . . . . . . 111 9(G, ZN, SS4, SS6)-1246 . . . . . . . . . . . . 111 9(P, G, SS4, SS6)-1261-3 . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1261-4 . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1261-6 . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1543 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1544 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1546 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1583 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1584 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1586 . . . . . . . . . . . . . . 110 9(G, ZN, SS4, SS6)-1643 . . . . . . . . . . . . 110 9(G, ZN, SS4, SS6)-1644 . . . . . . . . . . . . 110 9(G, ZN, SS4, SS6)-1646 . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1743 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1744 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1746 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1843 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1863 . . . . . . . . . . . . . . 110 9(P, G, SS4, SS6)-1864 . . . . . . . . . . . . . . 110 9(G, ZN, SS4, SS6)-3305-3 . . . . . . . . . 111 9(G, ZN, SS4, SS6)-3305-4 . . . . . . . . . 111 9(G, ZN, SS4, SS6)-3305-6 . . . . . . . . . 111 9(G, P, SS6)-9023 . . . . . . . . . . . . . . . . . . . . 112 9(G, P, SS6)-9024 . . . . . . . . . . . . . . . . . . . . 112 9(P, G, SS4, SS6)-9033 . . . . . . . . . . . . . . 112 9(P, G, SS4, SS6)-9034 . . . . . . . . . . . . . . 112 9(P, G, SS4, SS6)-9036 . . . . . . . . . . . . . . 112 B185CCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 B409-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 B409-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Index Steel Wire Basket Tray Tray WB104 WB112 WB202 WB204 WB206 WB208 WB212 WB218 WB224 WB408 WB412 WB418 WB424 WB504 WB604
Accessories 117 117 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 ................................ ................................
Covers WBP200259 WBP200459 WBP200659 WBP200859 WBP201259 WBP201859 WBP202459
133 133 . . . . . . . . . . . . . . . . . . . . . . . . . . 133 . . . . . . . . . . . . . . . . . . . . . . . . . . 133 . . . . . . . . . . . . . . . . . . . . . . . . . . 133 . . . . . . . . . . . . . . . . . . . . . . . . . . 133 . . . . . . . . . . . . . . . . . . . . . . . . . . 133 .......................... ..........................
WB2B-3M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 WB2DO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 WB2FS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 WB2GC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB2MP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 WB2PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 WB2RR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 WB2RSPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 WB4B-3M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 WB2CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 WB2CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 WB4ESK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 WB4HAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 WB4HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 WB4PL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 WB4RSPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 WB4SC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 WB4SH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 WB4SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 WB4WB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 WB04P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB6CH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 WB06DO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 WB06P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB08P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB09DO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 WB12DO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 WB12P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB12SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 WB18P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB24P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB30BC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 WB30RB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 WB41SK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 WB42SK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 WB43SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 WB43SK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 WB44SK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 WB45SK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 WB48WMK . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 WB050CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 WB075CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 WB100CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 WB125CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 WB138FPSK . . . . . . . . . . . . . . . . . . . . . . . . . 130 WB150CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 WB200CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 WB200FPSK . . . . . . . . . . . . . . . . . . . . . . . . . 130 WB202BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB204BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB206BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB208BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB212BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB218BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB224BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB312-18UF . . . . . . . . . . . . . . . . . . . . . . . . . 130 WB408BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB412-18UF . . . . . . . . . . . . . . . . . . . . . . . . . 130 WB412BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
193
WB418BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB424BE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 WB506CB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WB506SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 WB508CB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WB508SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 WB510CB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WB510SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 WB512-18UF . . . . . . . . . . . . . . . . . . . . . . . . . 130 WB514CB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WB514SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 WB612-18UF . . . . . . . . . . . . . . . . . . . . . . . . . 130 WB1224WMK . . . . . . . . . . . . . . . . . . . . . . . . 128 WB5108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WB5112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WB5118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WB5124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 9ZN-5212WB . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5308 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5312 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5318 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5324 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5506 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5508 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5518 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WB5524 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 WBM6CASS4 . . . . . . . . . . . . . . . . . . . . . . . . . 118 WBSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 WB-TLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 WBWTK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 B199-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 B199-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 B199-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 B199-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 B199-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 B212-1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 B409UF-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 B409UF-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 B409UF-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 B501 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 B719EB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 SB420ACW . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 SB420AFB . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 SB420ATG . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 SB420AYZN . . . . . . . . . . . . . . . . . . . . . . . . . . 135 SB2204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
800-851-7415 ext. 366
Index Steel Series 1 Cable Tray Tray 148P Series 148G Series 156P Series 156G Series 166P Series 166G Series 176P Series 176G Series
137 137 . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 . . . . . . . . . . . . . . . . . . . . . . . . . . 138 . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 . . . . . . . . . . . . . . . . . . . . . . . . . . 139 . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 . . . . . . . . . . . . . . . . . . . . . . . . . . 140 ........................... ..........................
Fittings 14(P, 14(P, 14(P, 14(P, 14(P, 15(P, 15(P, 15(P, 15(P, 15(P, 16(P, 16(P, 16(P, 16(P, 16(P, 17(P, 17(P, 17(P, 17(P, 17(P,
G)-xx-xxHB Series . . . . . . . . . . . . . G)-xx-xxHT Series . . . . . . . . . . . . . G)-xx-xxHX Series . . . . . . . . . . . . . G)-xx-xxVI Series . . . . . . . . . . . . . . G)-xx-xxVO Series . . . . . . . . . . . . . G)-xx-xxHB Series . . . . . . . . . . . . . G)-xx-xxHT Series . . . . . . . . . . . . . G)-xx-xxHX Series . . . . . . . . . . . . . G)-xx-xxVI Series . . . . . . . . . . . . . . G)-xx-xxVO Series . . . . . . . . . . . . . G)-xx-xxHB Series . . . . . . . . . . . . . G)-xx-xxHT Series . . . . . . . . . . . . . G)-xx-xxHX Series . . . . . . . . . . . . . G)-xx-xxVI Series . . . . . . . . . . . . . . G)-xx-xxVO Series . . . . . . . . . . . . . G)-xx-xxHB Series . . . . . . . . . . . . . G)-xx-xxHT Series . . . . . . . . . . . . . G)-xx-xxHX Series . . . . . . . . . . . . . G)-xx-xxVI Series . . . . . . . . . . . . . . G)-xx-xxVO Series . . . . . . . . . . . . .
141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141
Covers 801G18 Series . . . . . . . . . . . . . . . . . . . . . . . 148 801G18 (Fitting Style) Series . . . . . . . . 148 801P20 Series . . . . . . . . . . . . . . . . . . . . . . . . 148 801P20 (Fitting Style) Series . . . . . . . . 148 809G18 Series . . . . . . . . . . . . . . . . . . . . . . . 148 809G18 (Fitting Style) Series . . . . . . . . 148 809P20 Series . . . . . . . . . . . . . . . . . . . . . . . . 148 809P20 (Fitting Style) Series . . . . . . . . 148 811G18 Series . . . . . . . . . . . . . . . . . . . . . . . . 148 811G18 (Fitting Style) Series . . . . . . . . 148 811P20 Series . . . . . . . . . . . . . . . . . . . . . . . . 148 811P20 (Fitting Style) Series . . . . . . . . 148 819G18 Series . . . . . . . . . . . . . . . . . . . . . . . 148 819G18 (Fitting Style) Series . . . . . . . . 148 819P20 Series . . . . . . . . . . . . . . . . . . . . . . . . 148 819P20 (Fitting Style) Series . . . . . . . . 148
Accessories 9(P, G)-1104T Series . . . . . . . . . . . . . . . . . 145 9ZN-1113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 99-1124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 9ZN-1150 Series . . . . . . . . . . . . . . . . . . . . . 143 9(ZN, G)-1158 Series . . . . . . . . . . . . . . . . 143 9ZN-1204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-1204NB . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-1208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-1208NB . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9(P, G)-2004-1/2 . . . . . . . . . . . . . . . . . . . . . . 142 9(P, G)-2005-1/2 . . . . . . . . . . . . . . . . . . . . . . 142 9(P, G)-2006-1/2 . . . . . . . . . . . . . . . . . . . . . . 142
www.cooperbline.com
9(P, G)-2007-1/2 . . . . . . . . . . . . . . . . . . . . . . 142 99-2125-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 9A-2130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9(ZN, SS4)-2351 . . . . . . . . . . . . . . . . . . . . . 144 9(ZN, SS4)-2352 . . . . . . . . . . . . . . . . . . . . . 144 9(ZN, G)-4004 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-4005 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-4006 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-4007 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-4014 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-4015 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-4016 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-4017 . . . . . . . . . . . . . . . . . . . . . . . . 142 9ZN-5106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5106-WB . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5109-WB . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5112-WB . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5118-WB . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5124-WB . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5324 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5325 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9ZN-5326 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 9(ZN, G)-7024 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8004 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8024 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8025 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8026 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8034 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8034-12 . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8034-36 . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8035 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8035-12 . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8035-36 . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8036 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8036-12 . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8036-36 . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8045 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8046 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(P, G)-8054 . . . . . . . . . . . . . . . . . . . . . . . . . . 143 9(P, G)-8055 . . . . . . . . . . . . . . . . . . . . . . . . . . 143 9(P, G)-8056 . . . . . . . . . . . . . . . . . . . . . . . . . . 143 9(ZN, G)-8060 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(P, G)-8064 Series . . . . . . . . . . . . . . . . . . 143 9(P, G)-8065 Series . . . . . . . . . . . . . . . . . . 143 9(P, G)-8066 Series . . . . . . . . . . . . . . . . . . 143 9(ZN, G)-8074 Series . . . . . . . . . . . . . . . . 143 9(ZN, G)-8075 Series . . . . . . . . . . . . . . . . 143 9(ZN, G)-8076 Series . . . . . . . . . . . . . . . . 143 9(ZN, G)-8084 Series . . . . . . . . . . . . . . . . 143 9(ZN, G)-8085 Series . . . . . . . . . . . . . . . . 143 9(ZN, G)-8086 Series . . . . . . . . . . . . . . . . 143 9(ZN, G)-8244 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8245 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-8246 . . . . . . . . . . . . . . . . . . . . . . . . 142 9(ZN, G)-9014 . . . . . . . . . . . . . . . . . . . . . . . . 148 9(ZN, G)-9015 . . . . . . . . . . . . . . . . . . . . . . . . 148 9(ZN, G)-9016 . . . . . . . . . . . . . . . . . . . . . . . . 148 9(ZN, G)-9019 . . . . . . . . . . . . . . . . . . . . . . . . 148 9(P, G)-xx-9040 Series . . . . . . . . . . . . . . . 148 9(P, G)-9043 . . . . . . . . . . . . . . . . . . . . . . . . . . 148 9(P, G)-xx-9044 Series . . . . . . . . . . . . . . . 148
194
9(P, G)-9053 . . . . . . . . . . . . . . . . . . . . . . . . . . 148 9(P, G)-xx-9054 Series . . . . . . . . . . . . . . . 148 9(P, G)-9063 . . . . . . . . . . . . . . . . . . . . . . . . . . 148 9(P, G)-xx-9064 Series . . . . . . . . . . . . . . . 148 9ZN-9101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 9ZN-9102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 9ZN-9103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 9ZN-9104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 9(ZN, G)-9243 . . . . . . . . . . . . . . . . . . . . . . . . 148 99-9980 Series . . . . . . . . . . . . . . . . . . . . . . . 148 99-9982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 99-N1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 72(P, G) Series . . . . . . . . . . . . . . . . . . . . . . . 145 72(P, G)-90HBFL . . . . . . . . . . . . . . . . . . . . . 145 72(P, G)-xxVI Series . . . . . . . . . . . . . . . . . 145 72(P, G)-xxVO Series . . . . . . . . . . . . . . . . 145 737(P, G) Series . . . . . . . . . . . . . . . . . . . . . . 145 737(P, G)-90HBFL . . . . . . . . . . . . . . . . . . . . 145 737(P, G)-xxVI Series . . . . . . . . . . . . . . . . 145 737(P, G)-xxVO Series . . . . . . . . . . . . . . . 145 747(P, G) Series . . . . . . . . . . . . . . . . . . . . . . 145 747(P, G)-90HBFL . . . . . . . . . . . . . . . . . . . . 145 747(P, G)-xxVI Series . . . . . . . . . . . . . . . . 145 747(P, G)-xxVO Series . . . . . . . . . . . . . . . 145 757(P, G) Series . . . . . . . . . . . . . . . . . . . . . . 145 757(P, G)-90HBFL . . . . . . . . . . . . . . . . . . . . 145 757(P, G)-xxVI Series . . . . . . . . . . . . . . . . 145 757(P, G)-xxVO Series . . . . . . . . . . . . . . . 145 ATR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 B212-1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B212-3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B210A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B297-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B297-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B297-42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B305 thru B308 . . . . . . . . . . . . . . . . . . . . . . . 147 B312-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B312-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B312-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B321-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B321-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B351 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B409-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B409-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B409-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B409UF-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B409UF-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B441-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B441-22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B494-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B494-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B494-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B494-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B494-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B494-42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B501 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 B655 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 B701-Jx Series . . . . . . . . . . . . . . . . . . . . . . . 147 B751-Jx Series . . . . . . . . . . . . . . . . . . . . . . . 147 B752 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 B753 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 RNCB3/8x3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . 143 SFHN3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Index Steel Series 2, 3, 4 & 5 Cable Tray Tray 248(P, 258(P, 268(P, 346(P, 356(P, 366(P, 444(P, 454(P, 464(P, 378(P, 476(P, 574(P,
G) G) G) G) G) G) G) G) G) G) G) G)
Series Series Series Series Series Series Series Series Series Series Series Series
150, 152, 154, 150, 152, 154, 150, 152, 154, 156, 156, 156,
151 153 155 151 153 155 151 153 155 157 157 157
G)-xx-xxCSF Series . . G)-xx-xxHB Series . . . . G)-xx-xxHT Series . . . . G)-xx-xxHX Series . . . . G)-xx-xxHYL Series . . G)-xx-xxHYR Series . . G)-xx-xxVI Series . . . . . G)-xx-xxVO Series . . . . G)-xx-xxVT Series . . . . G)-xx-xxVTU Series . .
158 158 158 158 158 158 158 158 158 158
80(2, 3, 4, 5)G18 Series . . . . . . . . . . . . . 80(2, 3, 4, 5)G18 (Fitting Style) Series . . 80(2, 3, 4, 5)P20 Series . . . . . . . . . . . . . 80(2, 3, 4, 5)P20 (Fitting Style) Series . . 81(2, 3, 4, 5)G18 Series . . . . . . . . . . . . . 81(2, 3, 4, 5)G18 (Fitting Style) Series . . 81(2, 3, 4, 5)P20 Series . . . . . . . . . . . . . 81(2, 3, 4, 5)P20 (Fitting Style) Series . . 82(2, 3, 4, 5)G18 Series . . . . . . . . . . . . . 82(2, 3, 4, 5)G18 (Fitting Style) Series . . 82(2, 3, 4, 5)P20 Series . . . . . . . . . . . . . 82(2, 3, 4, 5)P20 (Fitting Style) Series . .
168 168 168 168 168 168 168 168 168 168 168 168
................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................
Fittings (4, (4, (4, (4, (4, (4, (4, (4, (4, (4,
5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
7)(P, 7)(P, 7)(P, 7)(P, 7)(P, 7)(P, 7)(P, 7)(P, 7)(P, 7)(P,
Covers
Accessories 99-NY36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 99-NP240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 9(P, G)-1104 Series . . . . . . . . . . . . . . . . . . 161 9(P, G)-1104T Series . . . . . . . . . . . . . . . . . 161 99-1124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 9ZN-1150 Series . . . . . . . . . . . . . . . . . . . . . 160 9ZN-1155 Series . . . . . . . . . . . . . . . . . . . . . 160 9(ZN, G)-1158 Series . . . . . . . . . . . . . . . . 160 9ZN-1204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 9ZN-1204NB . . . . . . . . . . . . . . . . . . . . . . . . . . 163 9(A, G, ZN, SS6)-1205 . . . . . . . . . . . . . . 163 9ZN-1208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 9ZN-1208NB . . . . . . . . . . . . . . . . . . . . . . . . . . 163 9(ZN, G)-1240 . . . . . . . . . . . . . . . . . . . . . . . . 160 9(ZN, G)-1241 . . . . . . . . . . . . . . . . . . . . . . . . 166 9(ZN, G)-1242 . . . . . . . . . . . . . . . . . . . . . . . . 166 9(ZN, G)-1249 . . . . . . . . . . . . . . . . . . . . . . . . 163 9(P, G)-2004-1/2 . . . . . . . . . . . . . . . . . . . . . . 142
9(P, G)-2005-1/2 . . . . . . . . . . . . . . . . . . . . . . 142 9(P, G)-2006-1/2 . . . . . . . . . . . . . . . . . . . . . . 142 9(P, G)-2007-1/2 . . . . . . . . . . . . . . . . . . . . . . 142 99-2125-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 9A-2130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 9(ZN, SS4)-2351 . . . . . . . . . . . . . . . . . . . . . 162 9(ZN, SS4)-2352 . . . . . . . . . . . . . . . . . . . . . 162 9SS4-4050 thru 4475 . . . . . . . . . . . . . . . . 162 9ZN-5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 9ZN-5212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 9ZN-5224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 9(ZN, G)-5324 thru 5327 . . . . . . . . . . . . 162 9(ZN, G)-5500-1/2 . . . . . . . . . . . . . . . . . . . . 164 9(P, G)-55xx-22SH Series . . . . . . . . . . . 164 9(GRN, G)-55xx-22SHA Series . . . . . 164 9(ZN, G)-8004 thru 8007 . . . . . . . . . . . . 159 9(ZN, G)-8004-1/2 thru 8007-1/2 . . . . . 159 9(ZN, G)-8014 thru 8017 . . . . . . . . . . . . 159 9(P, G)-8024 thru 8027 . . . . . . . . . . . . . . 159 9(ZN, G)-8034 . . . . . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8034-12 . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8034-36 . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8035 . . . . . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8035-12 . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8035-36 . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8036 . . . . . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8036-12 . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8036-36 . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8037 . . . . . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8037-12 . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8037-36 . . . . . . . . . . . . . . . . . . . . 159 9(ZN, G)-8045 thru 8047 . . . . . . . . . . . . 159 9(P, G)-8054 thru 8057 . . . . . . . . . . . . . . 160 9(ZN, G)-8060 thru 8062 . . . . . . . . . . . . 159 9(P, G)-8064 thru 8067 Series . . . . . . 160 9(ZN, G)-8074 thru 8077 Series . . . . 160 9(P, G)-8084 thru 8087 Series . . . . . . 160 9(ZN, G)-8224 thru 8227 . . . . . . . . . . . . 166 9(ZN, G)-8244 thru 8247 . . . . . . . . . . . . 159 9ZN-9002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 9(ZN, G)-9014 . . . . . . . . . . . . . . . . . . . . . . . . 169 9(ZN, G)-9015 . . . . . . . . . . . . . . . . . . . . . . . . 169 9(ZN, G)-9016 . . . . . . . . . . . . . . . . . . . . . . . . 169 9(ZN, G)-9017 . . . . . . . . . . . . . . . . . . . . . . . . 169 9(P, G)-9043 . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9(P, G)-9044 . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9(P, G)-9053 . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9(P, G)-9054 . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9(P, G)-9063 . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9(P, G)-9064 . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9(P, G)-9073 . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9(P, G)-9074 . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-9101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-9102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-9103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-9104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 99-9980 Series . . . . . . . . . . . . . . . . . . . . . . . 169 99-9982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 9ZN-91141 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-91142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-91143 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
195
9ZN-91144 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-91151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-91152 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-91153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 9ZN-91154 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 99-N1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 73(P, G) Series . . . . . . . . . . . . . . . . . . . . . . . 161 73(P, G)-90HBFL . . . . . . . . . . . . . . . . . . . . . 161 73(P, G)-xxVI Series . . . . . . . . . . . . . . . . . 161 73(P, G)-xxVO Series . . . . . . . . . . . . . . . . 161 74(P, G) Series . . . . . . . . . . . . . . . . . . . . . . . 161 74(P, G)-90HBFL . . . . . . . . . . . . . . . . . . . . . 161 74(P, G)-xxVI Series . . . . . . . . . . . . . . . . . 161 74(P, G)-xxVO Series . . . . . . . . . . . . . . . . 161 75(P, G) Series . . . . . . . . . . . . . . . . . . . . . . . 161 75(P, G)-90HBFL . . . . . . . . . . . . . . . . . . . . . 161 75(P, G)-xxVI Series . . . . . . . . . . . . . . . . . 161 75(P, G)-xxVO Series . . . . . . . . . . . . . . . . 161 76(P, G) Series . . . . . . . . . . . . . . . . . . . . . . . 161 76(P, G)-90HBFL . . . . . . . . . . . . . . . . . . . . . 161 76(P, G)-xxVI Series . . . . . . . . . . . . . . . . . 161 76(P, G)-xxVO Series . . . . . . . . . . . . . . . . 161 ATR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 B212-1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B212-3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B297-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B297-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B297-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B297-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B297-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B297-42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B305 thru B308 . . . . . . . . . . . . . . . . . . . . . . . 167 B312-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B312-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B312-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B321-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B321-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B355 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B409-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B409-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B409-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B409UF-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B409UF-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B441-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B441-22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 B494-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 B494-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 B494-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 B494-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 B494-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 B494-42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 B494-48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 B501 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 B655 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 B700-Jx Series . . . . . . . . . . . . . . . . . . . . . . . 167 B750-Jx Series . . . . . . . . . . . . . . . . . . . . . . . 167 RNCB3/8x3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . 160 SFHN3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
800-851-7415 ext. 366
Index Fiberglass Cable Channel Channel
Fittings
Accessories
FCC-03 Series . . . . . . . . . . . . . . . . . . . . . . . . 172 FCC-04 Series . . . . . . . . . . . . . . . . . . . . . . . . 172 FCC-06 Series . . . . . . . . . . . . . . . . . . . . . . . . 172 FCC-08 Series . . . . . . . . . . . . . . . . . . . . . . . . 172 FCCN-03 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCN-04 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCN-06 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCN-08 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCV-03 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCV-04 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCV-06 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCV-08 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCVN-03 Series . . . . . . . . . . . . . . . . . . . . 172 FCCVN-04 Series . . . . . . . . . . . . . . . . . . . . 172 FCCVN-06 Series . . . . . . . . . . . . . . . . . . . . 172 FCCVN-08 Series . . . . . . . . . . . . . . . . . . . . 172 FCCT-03 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCT-04 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCT-06 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCT-08 Series . . . . . . . . . . . . . . . . . . . . . . 172 FCCTN-03 Series . . . . . . . . . . . . . . . . . . . . 172 FCCTN-04 Series . . . . . . . . . . . . . . . . . . . . 172 FCCTN-06 Series . . . . . . . . . . . . . . . . . . . . 172 FCCTN-08 Series . . . . . . . . . . . . . . . . . . . . 172
F(CCN, CCVN, CCTN)-03-45HB12 . . . 172 F(CCN, CCVN, CCTN)-03-45VI12 . . . . . 172 F(CCN, CCVN, CCTN)-03-45VO12 . . . 172 F(CCN, CCVN, CCTN)-03-90HB12 . . . 172 F(CCN, CCVN, CCTN)-03-90VI12 . . . . . 172 F(CCN, CCVN, CCTN)-03-90VO12 . . . 172 F(CCN, CCVN, CCTN)-03-HT12 . . . . . . 173 F(CCN, CCVN, CCTN)-03-HX12 . . . . . . 173 F(CCN, CCVN, CCTN)-04-45HB12 . . . 172 F(CCN, CCVN, CCTN)-04-45VI12 . . . . . 172 F(CCN, CCVN, CCTN)-04-45VO12 . . . 172 F(CCN, CCVN, CCTN)-04-90HB12 . . . 172 F(CCN, CCVN, CCTN)-04-90VI12 . . . . . 172 F(CCN, CCVN, CCTN)-04-90VO12 . . . 172 F(CCN, CCVN, CCTN)-04-HT12 . . . . . . 173 F(CCN, CCVN, CCTN)-04-HX12 . . . . . . 173 F(CCN, CCVN, CCTN)-06-45HB12 . . . 172 F(CCN, CCVN, CCTN)-06-45VI12 . . . . . 172 F(CCN, CCVN, CCTN)-06-45VO12 . . . 172 F(CCN, CCVN, CCTN)-06-90HB12 . . . 172 F(CCN, CCVN, CCTN)-06-90VI12 . . . . . 172 F(CCN, CCVN, CCTN)-06-90VO12 . . . 172 F(CCN, CCVN, CCTN)-06-HT12 . . . . . . 173 F(CCN, CCVN, CCTN)-06-HX12 . . . . . . 173 F(CCN, CCVN, CCTN)-08-45HB12 . . . 172 F(CCN, CCVN, CCTN)-08-45VI12 . . . . . 172 F(CCN, CCVN, CCTN)-08-45VO12 . . . 172 F(CCN, CCVN, CCTN)-08-90HB12 . . . 172 F(CCN, CCVN, CCTN)-08-90VI12 . . . . . 172 F(CCN, CCVN, CCTN)-08-90VO12 . . . 172 F(CCN, CCVN, CCTN)-08-HT12 . . . . . . 173 F(CCN, CCVN, CCTN)-08-HX12 . . . . . . 173
9F-1001SS6 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1013SS6 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1023SS6 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1033SS6 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1301HSS6 . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1301VSS6 . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1451HSS6 . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1451VSS6 . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1901HSS6 . . . . . . . . . . . . . . . . . . . . . . . . 173 9F-1901VSS6 . . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1001SS6 . . . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1013SS6 . . . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1023SS6 . . . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1033SS6 . . . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1301HSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1301VSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1451HSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1451VSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1901HSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FT-1901VSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1001SS6 . . . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1013SS6 . . . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1023SS6 . . . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1033SS6 . . . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1301HSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1301VSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1451HSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1451VSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1901HSS6 . . . . . . . . . . . . . . . . . . . . . . . 173 9FV-1901VSS6 . . . . . . . . . . . . . . . . . . . . . . . 173
www.cooperbline.com
196
Index Fiberglass Cable Tray Tray
Covers
13F Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 13FT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 13FV Series . . . . . . . . . . . . . . . . . . . . . . . . . . 174 24F Series . . . . . . . . . . . . . . . . . . . . . . 174, 176 24FT Series . . . . . . . . . . . . . . . . . . . . 174, 176 24FV Series . . . . . . . . . . . . . . . . . . . . 174, 176 36F Series . . . . . . . . . . . . . . . . . . . . . . 174, 178 36FT Series . . . . . . . . . . . . . . . . . . . . 174, 178 36FV Series . . . . . . . . . . . . . . . . . . . . 174, 178 46F Series . . . . . . . . . . . . . . . . . . . . . . 174, 178 46FT Series . . . . . . . . . . . . . . . . . . . . 174, 178 46FV Series . . . . . . . . . . . . . . . . . . . . 174, 178 48F Series . . . . . . . . . . . . . . . . . . . . . . 174, 180 48FT Series . . . . . . . . . . . . . . . . . . . . 174, 180 48FV Series . . . . . . . . . . . . . . . . . . . . 174, 180 H46F Series . . . . . . . . . . . . . . . . . . . . 174, 178 H46FT Series . . . . . . . . . . . . . . . . . . 174, 178 H46FV Series . . . . . . . . . . . . . . . . . . 174, 178
F-C-24-120 . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 FP-C-24-120 . . . . . . . . . . . . . . . . . . . . . . . . . . 182 FT-C-24-120 . . . . . . . . . . . . . . . . . . . . . . . . . . 182 FTP-C-24-120 . . . . . . . . . . . . . . . . . . . . . . . . 182 FV-C-24-120 . . . . . . . . . . . . . . . . . . . . . . . . . . 182 FVP-C-24-120 . . . . . . . . . . . . . . . . . . . . . . . . 182
Fittings 3(F, 3(F, 3(F, 3(F, 3(F, 3(F, 3(F, 3(F, 3(F, 3(F, 4(F, 4(F, 4(F, 4(F, 4(F, 4(F, 4(F, 4(F, 4(F, 4(F, 6(F, 6(F, 6(F, 6(F, 6(F, 6(F, 6(F, 6(F, 6(F, 6(F, 8(F, 8(F, 8(F, 8(F, 8(F, 8(F, 8(F, 8(F,
FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT, FT,
FV)-xx-xxHB Series . . . . . . . . . FV)-xx-xxHT Series . . . . . . . . . FV)-xx-xxHX Series . . . . . . . . . FV)-xx-xxLR Series . . . . . . . . . FV)-xx-xxRR Series . . . . . . . . . FV)-xx-xxSR Series . . . . . . . . . FV)-xx-xxVI Series . . . . . . . . . . FV)-xx-xxVO Series . . . . . . . . . FV)-xx-xxVT Series . . . . . . . . . FV)-xx-xxVTU Series . . . . . . . FV)-xx-xxHB Series . . . . . . . . . FV)-xx-xxHT Series . . . . . . . . . FV)-xx-xxHX Series . . . . . . . . . FV)-xx-xxLR Series . . . . . . . . . FV)-xx-xxRR Series . . . . . . . . . FV)-xx-xxSR Series . . . . . . . . . FV)-xx-xxVI Series . . . . . . . . . . FV)-xx-xxVO Series . . . . . . . . . FV)-xx-xxVT Series . . . . . . . . . FV)-xx-xxVTU Series . . . . . . . FV)-xx-xxHB Series . . . . . . . . . FV)-xx-xxHT Series . . . . . . . . . FV)-xx-xxHX Series . . . . . . . . . FV)-xx-xxLR Series . . . . . . . . . FV)-xx-xxRR Series . . . . . . . . . FV)-xx-xxSR Series . . . . . . . . . FV)-xx-xxVI Series . . . . . . . . . . FV)-xx-xxVO Series . . . . . . . . . FV)-xx-xxVT Series . . . . . . . . . FV)-xx-xxVTU Series . . . . . . . FV)-xx-xxHB Series . . . . . . . . . FV)-xx-xxHT Series . . . . . . . . . FV)-xx-xxHX Series . . . . . . . . . FV)-xx-xxLR Series . . . . . . . . . FV)-xx-xxRR Series . . . . . . . . . FV)-xx-xxSR Series . . . . . . . . . FV)-xx-xxVI Series . . . . . . . . . . FV)-xx-xxVO Series . . . . . . . . .
175 175 175 175 175 175 175 175 175 175 177 177 177 177 177 177 177 177 177 177 179 179 179 179 179 179 179 179 179 179 181 181 181 181 181 181 181 181
Accessories 9F-1083-W . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-1084-W . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-1086 -W . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-1104 -W . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 9F-1208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 9(F, FT, FV)-20xx Series . . . . . . . . . . . . 185 9F-4003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4033 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4053 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-4054 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9(F, FT, FV)-4303H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4303V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4304H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4304V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4453H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4453V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4454H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4454V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4903H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4903V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4904H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-4904V . . . . . . . . . . . . . . . . . . . 184 9F-8006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 9F-8028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8036 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8038 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8056 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8058 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8063 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9F-8064 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 9(F, FT, FV)-8306H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8306V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8308H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8308V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8456H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8456V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8458H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8458V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8906H . . . . . . . . . . . . . . . . . . . 184
197
9(F, FT, FV)-8906V . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8908H . . . . . . . . . . . . . . . . . . . 184 9(F, FT, FV)-8908V . . . . . . . . . . . . . . . . . . . 184 9F-9013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-9014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-9016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-W-9034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-W-9034-P . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-W-9044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-W-9044-P . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-W-9064 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-W-9064-P . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-W-9084 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 9F-W-9084-P . . . . . . . . . . . . . . . . . . . . . . . . . 182 72(F, FT, FV) Series . . . . . . . . . . . . . . . . . . 185 72(F, FT, FV)-90HBFL . . . . . . . . . . . . . . . . 185 72(F, FT, FV)-90VI Series . . . . . . . . . . . . 185 72(F, FT, FV)-90VO Series . . . . . . . . . . 185 73(F, FT, FV) Series . . . . . . . . . . . . . . . . . . 185 73(F, FT, FV)-90HBFL . . . . . . . . . . . . . . . . 185 73(F, FT, FV)-90VI Series . . . . . . . . . . . . 185 73(F, FT, FV)-90VO Series . . . . . . . . . . 185 75(F, FT, FV) Series . . . . . . . . . . . . . . . . . . 185 75(F, FT, FV)-90HBFL . . . . . . . . . . . . . . . . 185 75(F, FT, FV)-90VI Series . . . . . . . . . . . . 185 75(F, FT, FV)-90VO Series . . . . . . . . . . 185 PK-BAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 RSK-010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 TPDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
800-851-7415 ext. 366
Miscellaneous Notes
www.cooperbline.com
198
Miscellaneous Notes
199
800-851-7415 ext. 366
Miscellaneous Notes
www.cooperbline.com
200
All Products Cable Tray Index
www.cooperbline.com
201
800-851-7415 ext. 366
Cabling Support Options View, Order or even Download these Catalogs and more! www.cooperbline.com/product/PDFLibrary/Information.asp
s em t s Sy l™ 1 i a i-R R-0 R Red
Cable Tray Systems CT-02
Fib er Tra glass yS Ca CT0 ystem ble 3FR s P
CT-02
CABLE TRAY SYSTEMS FIBE
RGL
ASS
CAB
LE T
R AY
SYST
CT 03F RP
EMS
e ers
WB-02
WIRE BASK
ET CABLE
SYSTEMS THAT MAKE SENSE S YS TE MS
WB-02
SUPPORT S
YSTEMS
TH AT MA KE SE NS E
SYST EMS T HAT M AKE S ENSE
s System l i a R Cent-R R-03 C
Wire B as Suppo ket Cable rt Syst e WB-02 ms
800-851-7415 ext. 366
40703
Ask the Experts
Cent-R-Rail
Redi-Rail
Non-Metallic Cable Tray Wire Basket Metallic Cable Tray
Cooper B-Line, Inc 509 W. Monroe Street Highland, IL 62249 Phone: 800-851-7415 Fax: 618-654-1917 www.cooperbline.com