Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Price: $2,999.00 Length: 3 Days Intrinsic Safety Training by TONEX Intrinsic Safety Training by TONEX covers all aspects of Intrinsic safety principals and prevention techniques and methods to avoid and prevent explosions from occurring. Learn about Intrinsic Safety ATEX Directives, IECEx, NEX,CSA, MSHA and OSHA guidelines and how to ensure that the energy transferred to a hazardous area and location is controlled and is well below the levels to trigger an explosion. Intrinsically Safe (I.S.) is usually used as a term to describe products destined for a possible explosive area. “Intrinsically Safe� (IS) and Nonincendive are also referring to protection levels for safe operation of electronic equipment in various explosive atmospheres. The hazardous location ratings are also divided into Class, Division, and Group to indicate the existence of flammable gases or vapors, ignitable dust, fibers, or filings under normal or unlikely conditions of operation to be used in safe operation in hazardous areas, particularly around petro-chemicals, flammable gasses and dusts.
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Why use TONEX for intrinsic safety training? Intrinsic Safety Training course is designed to teach you how to plan, analyze, design, test, verify & validate, and document effectively, and get ready certification. Intrinsic safety is considered as a requirement that may be applicable to devices that are being operated in areas with flammable gases or fuels. An intrinsically safe piece of equipment won’t ignite flammable gases.
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Learning Objectives Upon completion of this course, the attendees will be able to: •Concisely define what Intrinsic Safety is •List basic hazards associated with the use of electricity near flammable gases, vapors and dusts •Explain the value proposition behind protection techniques •Discuss the merits and downsides of Intrinsic Safety •Discuss the business and technical considerations for Intrinsic Safety including savings, reliability and flexibility •List legal requirements and recommendations of the various Codes of Practice in relation to gases and dusts •Describe Intrinsic Safety and where it fits in control safety and design techniques applied to various industries •Discuss the basic guidelines for installation and maintenance in hazardous locations •List the principles of how the degree of hazard can be assessed by the classification of hazardous areas •Explain what types of apparatus may be used in particular locations •Discuss how electrical and instrument equipment can be treated and made safe •Describe Safety Integrity Levels (SIL)
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Intended Audience This course is intended for those interested in theory behind Intrinsic Safety, hazardous area protection methods and techniques. Course Agenda What is Intrinsic Safety? •Introduction to Intrinsic Safety •Protection Layers: Hazardous Atmosphere •Explosion Proof (XP) •Isolating the explosive gases and dust from a device •Oxygen •Flammable Substanc •Ignition Source •Potential explosion sources. •Type of hazards •Hazardous Area •Non-hazardous (safe) area •Potentially hazardous material •Degree of hazard •Ignition and explosion protection principles
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Classification by Classes, Divisions and Groups •Classification by Zones •Hazardous Areas •Combustible dust in Class ll locations •What is Intrinsically Safe (I.S.)? •Intrinsically Safe (I.S.) Systems Overview •conductivity of the hazardous substance •ATEX Directive 94/9/EC •Underwriters Laboratories (UL) •National Electrical Code (NEC) •Canadian Standards Association (CSA) •Canadian Electric Code (CEC) •IECEx, namely IEC 60079 •Factory Mutual Research Corporation (FM) •Mine Safety and Health Administration (MSHA)
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Electricity as a Source of Ignition •Sources of ignition •Sparks •Heat •Explosive limits for materials •Ignition Temperature •Auto-ignition temperature •Spontaneous ignition temperature •Flashpoint Definition •Area Classification •Nature of the Hazard •Locations of hazard •Probability of presence •Requirement for plant classification •Gas Classification •Ignition Temperature •Area classification •Requirement for equipment classification •Apparatus Group •Temperature classification
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Cables, Barriers and Earthing •Power Supply Assessment •Energy storage assessment •capacitance and inductance, •design methods •safety components •zener shunt, diodes for blocking and inductance control, resistors with capacitance •safety component rating and de-rating (zeners) •Separation & Segregation •Creepgage, clearance, tracks, encapsulation, CTI •Thermal Assessment •small component rules, thermal calculations, potting, testing •Subject Review
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Introduction to Standards Technical Principles •European Directives •The Directive 94/9/EC (ATEX 95) •The Directive 99/92/EC (ATEX 137) •Zone Classification •Minimum Ignition Energy and Explosion Group •Minimum Ignition Temperature and Temperature Classes •Types of Protection •Application and Combination of Types of Protection “d” and “e” •Applications of Type of Protection “Intrinsic Safety” •Applications of Type of Protection “c” •Installation and Operation of Electrical Equipment •Duties of Installer, Manufacturer and Operator •Classification of Zones and Selection of Apparatus •Methods of Installation •Maintenance •Regulations •Potentially Explosive Atmospheres •Dangerous Substance and Explosive Atmospheres Regulations •Hazardous Areas & Protection Techniques
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Intrinsic Safety and Hazardous Areas •IECEx & ATEX Certification •SIL/Safety Systems verification •Component safety fraction analysis •Site Safety (ATEX137/DSEAR) •Ex Equipment Inspections •Plants, assemblies and skids •Intrinsically Safe Approved Apparatus •Open Circuit Voltage •Short Circuit Current •Unprotected Inductance •Unprotected Capacitance •Open Circuit Voltage (barrier) •Short Circuit Current (barrier) •Allowed Inductance (barrier) •Allowed Capacitance (barrier) •Inductance of interconnecting wiring •Capacitance of interconnecting wiring
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Intrinsic Safety Circuit Design •Limiting Energy To The Field Device •Intrinsically Safe •Apparatus •Switching •2-wire transmitters •Thermocouples & RTDs •Load cells •Solenoid valves •Potentiometers •LEDs •I/P transducers •Other devices •Hazardous Locations and Methods of Protection •Intrinsic safety as an energy-limitation protection technique •Explosion Protection Fundamentals •Ignition Energy •Fuel •Oxidizer •Explosive Mixture Characteristics
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Intrinsic Safety Area Classification •Classes •Class I, II and III •Gases and Vapors •Combustible Dusts •Class •Class l •Class ll •Class lll •Divisions •Division 1 – Normal Situation •Division 2 – Abnormal Situation: •Groups •Group A, B, C & D Gases and vapors in Class l locations •Groups E, F & G Combustible dust in Class ll locations
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Intrinsic Safety Categories •EX designation •ATEX (Atmosphere -Explosive) •94//EC Directive •New: ATEX 95 (Old: ATEX 100a) •1999/92/CE Directive •Minimum requirements for improving the health and safety protection of the worker at risk from explosive atmospheres. •New:ATEX 137 (Old: ATEX 118a) •Designation examples •Use in gaseous atmospheres: II G EEx ia IIC T4 •Use in dusty atmospheres: II 2 D T90ºC IP64 •Use for mining applications: I M2 EEx ia I
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Learn more about Intrinsic Safety Training Intrinsic Safety Ex i Concept Principles Device Group Analysis of Instruments Commonly Found in Hazardous Areas Quality Requirements for Intrinsic Safety Intrinsic Safety Applied Intrinsic Safety Approvals for Radio Communications Equipment Intrinsic Safety Certification Process
Intrinsic Safety Training | Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/
Intrinsic Safety Training , Crash Course https://www.tonex.com/training-courses/intrinsic-safety-training/