Tools 2 by Bicycle Technologies International

Tools RS-3005

ROCK SHOX

RS-3001

Fork & Shock

Rock Shox Rear Shock Tools

• For servicing current Rock Shox air and coil rear/frame shocks

RS-3042

s che Ben ools t &S

RS-3004

ke Bra ble a &C te & set l Cas whee e Fre

RS-3002

Rock Shox Rear Shock Tools

Rock Shox MissionControl Damper Wrench

part# RS-3018

part# RS-3019

price

description Schrader valve core tool

price

Rock Shox Speed Lube Kit

m Fra

ers mm Ha nches u &P et ads He

Rock Shox Schrader Valve Core Tool

s ive Kn ing tt u C etic gn Ma ols

part# RS-3040 RS-3039

Rock Shox Speed Lube Kit

a Ped

part# RS-3041

Rock Shox Charger Damper Bleed Tools

KIt ue

ild

lbu

hes

enc Wr

1244

model 2014+ Pike 2014+ Pike

description Charger damper bleed kit Charger damper adapter

price

• Necessary to remove the anchor on the Rock Shox RS-1 fork for damper service, replacing XLoc remote hose and replacing the CSU

& Tap ading e Thr

q Tor

price

Rock Shox RS-1 Anchor Fitting Tool

air Rep ds n Sta s ver dri ew r c S

& Tire e b u T

description Speed Lube bleed kit

• Necessary to bleed the Charger damper in the Rock Shox Pike fork • For the perfect bleed use in conjunction with the Rock Shox Speed Lube kit, BTI# RS-3012

i To

model Totem, XLoc (XX)

Rock Shox Charger Damper Bleed Tools

asu

lt Mu

• Aids in the quick change of oil-bath fluid in Rock Shox Totem forks and for servicing/bleeding XX-series XLoc hydraulic remote systems (not for Reverb seatposts: use RS-8305) • Includes: Speed Lube syringe+hose, adapter fittings/o-rings, and port-access wrench (BTI# RS-3012 includes dual syringes and specific items for XLoc compatibility) part# RS-3012

ee Wh

description 24mm MissionControl wrench

• Ergonomic, red plastic handle with a long/straight, notched tip for reaching recessed Schrader valve cores

k& For k c o Sh

l Too

price

Rock Shox Schrader Valve Core Tool

s& File ers m a Re

model Vivid, Kage Monarch Monarch, Vivid, Vivid Air Vivid Vivid (air) Vivid/ Vivid Air Vivid Air Monarch-Plus, Vivid 12mm eyelets 1/2” eyelets

• 24mm open/offset, thin profile wrench for removing/installing MissionControl compression dampers without having to remove damper knobs

description body vise blocks body vise blocks body vise blocks (3-hole) 4-pin spanner wrench + air/torx tool air can wrench Counter Measure Spring Compressor tool 31mm flat wrench (reservoir) IFP air valve adapter bushing removal/install tool bushing removal/install tool

Rock Shox MissionControl Damper Wrench

n hai

& t nk e Cra Brack Btm e rak cB Dis

part# RS-3008 RS-3009 RS-3042 RS-3002 RS-3007 RS-3032 RS-3047 RS-3001 RS-3004 RS-3005

Rock Shox RS-1 Anchor Fitting Tool

web www.bti-usa.com

model 2015 RS-1

description Anchor fitting tool (reverse threaded)

price

Stein Threadless Steerer Cutting Guide • • • •

Double-plated cutting guide installs with fork in frame Calibrated spacer adjusts for 35-46mm stem heights Hacksaw squarely cuts steerer between guide plates For threadless steerer sizes: 1”, 1-1/8”, 1-1/4”

part# JS-1222

Stein Threadless Steerer Cutting Guide

description threadless steerer cutting guide, all

price

TOPEAK

Ben c & S hes too ls

Topeak Threadless Cutting Guide

• Hardened steel, provides a straight cut on 1”, 1-1/8” and 1-1/4” steerer tubes part# TZ-1612

description threadless saw guide, 1”, 1-1/8”, 1-1/4”, , TPS-SP

Br & C ake abl e Cas set Fre te & ew hee l

price

UNDERWOOD DESIGN

ain

UDG Fork Seal and Wiper Installation Tool

• Designed to work with Rock Shox, Fox and Enduro (ABI) seal kits, the installation tool has both a dedicated wiper seal side and oil seal side to ensure proper installation without damaging seals or casting • Machined from 6061-T6 aluminum to exacting tolerances then anodized to decrease wear part# UD-1002 UD-1004 UD-1006 UD-1008 UD-1010

description seal/wiper install tool seal/wiper install tool seal/wiper install tool seal/wiper install tool seal/wiper install tool

model 32mm 34mm 35mm 36mm 40mm

C Btm rank Bra & cke t Dis cB rak e

Topeak Threadless Cutting Guide

Fil Rea es & me rs

price

For k Sho & ck Fra m

UD-1002

UDG Shock Bushing Install/Removal Tool

• Bushing tool machined from 6061-T651 aluminum billet and anodized to decrease wear • Designed to be used in a bench vise for installation and removal • UD-3200: for use with the (most common) 16mm ID DU bushings (0.5” ID, 19/32” OD, 0.5” length); will fit Fox, Cane Creek (AD-10, AD-12, Cloud Nine), Romic, Marzocchi Roco, Progressive 5th Element Coil, Rock Shox (Monarch & Vivid) and X-Fusion H3 shocks • UD-3203: for use with metric DU bushings (12mm ID, 14mm OD, 12mm length); will fit Answer Manitou, Rock Shox (Bar, Ario, MC3, MC3R, Pearl) and X-Fusion (Vector, O2, & Glyde) shocks part# UD-3200 UD-3203

Fork & Shock

Tools

STEIN

description 16mm ID bushing tool 12mm ID bushing tool

UD-1008

e Ha mm &P un ers che s He

ads

UD-1010

UDG Fork Seal and Wiper Installation Tool

price

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s Ped a

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing

AT $

Tire & Tub e

450

Too l

KIt

Tor q

UD-3200

Wh ee

lbu

ild

Wr enc

hes

UDG Shock Bushing Install/Removal Tool

phone 800.558.8324

1245

Tools

PARK TOOL

Frame

Park Tool Frame Alignment Gauge Park Tool Frame Alignment Gauge

• • • •

Measures head-tube/seat-tube/rear dropout alignment Ensures frame is in-line for proper tracking and shifting Retractable pointer fits virtually all frame sizes Black, anodized aluminum construction

part# PK-6302

description frame alignment gauge, FAG-2

price

Park Tool Derailleur Hanger Alignment Gauge • • • • • •

s che Ben ools t &S ke Bra ble a &C te & set l Cas whee e Fre

Park Tool Derailleur Hanger Alignment Gauge

part# PK-6323 NEW

ain

• • • • •

s& File ers m a Re

description dropout alignment gauge set, FFG-1

price

Park Tool Frame & Fork Straightener

m Fra

ers mm Ha nches u &P et ads He

Park Tool Dropout Alignment Gauge Set

• FFS-2 accommodates up to a 1-3/4” (44mm) diameter tube (35% larger than the FFS-1) • Over 8” of adjustment for differing leverage and sizing • Curved, notched lever arm with fulcrum and open hook • Open hook design for frames, forks, cranks, handlebars • Vinyl-coated handle, hook, and fulcrum protective comfort • Reinforced, chrome-plated steel construction part# PK-6342

s& ive Kn ing tt Cu etic gn Ma

Park Tool Frame & Fork Straightener

asu

a Ped

air Rep ds n Sta s ver dri ew r c S

Heavy-duty, precision alignment tool for rear dropouts Mounts to frame with secure quick-release tension Alignment handles swivel 360 degrees Adjustment barrels are graduated for 120-145mm frames

part# JS-3000

Stein Dropout Alignment Tool

price

• Set of two machined aluminum step-down sizing rods • Engraved markings to accurately determine proper ID • Sizes range from 25.4mm to 31.6mm part# JS-4500

KIt ue

ild

lbu

hes

enc Wr

Stein Seatpost Sizing Rod Set

1246

description dropout frame alignment tool, 120-145mm

Stein Seatpost Sizing Rod Set

& Tire e b u T

q Tor

price

STEIN • • • •

& Tap ading e Thr

description frame & fork straightener, FFS-2

Stein Dropout Alignment Tool

ool lti T

ee Wh

price

For use with 100-160mm dropouts and has comfortable molded grips Ensures fork and frame dropouts are spaced and parallel Mounts to dropouts for measuring width and parallel Long, lever arms for cold-setting alignment manipulation Chrome-plated, steel construction

part# PK-6332

k& For k c o Sh

l Too

description derailleur hanger alignment gauge, DAG-2.2

Park Tool Dropout Alignment Gauge Set

& t nk e Cra Brack Btm e rak cB Dis

Ensures rear derailleur hanger is parallel to wheel Mounts to hanger and measures distance to wheel Gauge arm also functions as cold set correction tool Chrome-plated steel construction Fits 20” to 29”+ wheels Improved clearance and reach to work on more frame/derailleur hanger combos, including low clearance thru axle derailleur hangers

web www.bti-usa.com

description seatpost sizing rod set, 25.4-31.6mm

price

Tools

Hammers

ELDI Eldi Plastic-Faced Mallet

• Plastic, double-faced mallet with wood handle • Great for low-impact, non-marring applications part# LD-61327

description 27mm diameter plastic faced mallet

price Eldi Plastic-Faced Mallet

GENERAL TOOLS Ben c & S hes too ls

General Tools Drive-Pin Punch 8-Pc Set • • • •

Heat-treated tool steel with centerless-ground ends 4” long with knurled bodies offer solid grip First (4) have 3/4” drive length, last (4) have 1” drive length Contains 8 individual punch sizes: 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, and a vinyl case

part# GT-0075

description drive-pin punch 8-pc set, 4”

Br & C ake abl e Cas set Fre te & ew hee l

price

ain

General Tools Automatic Ball-Bearing Center Punch • • • •

Lightweight aluminum body with long lasting steel parts Unique ball-bearing action for precise punch markings 5” overall length, 5/8” body diameter, replaceable all-steel point (BTI #GT-0078) Made in the USA

part# GT-0077

description automatic ball-bearing center punch

General Tools Drive-Pin Punch 8-Pc Set

Fil Rea es & me rs

price

For k Sho & ck

PARK TOOL Park Tool Shop Hammer

General Tools Automatic Ball-Bearing Center Punch

• Shop quality hammer with fiberglass reinforced handle and soft grip • One-piece, two-sided head with both steel and rubber striking surfaces part# PK-4702

description shop hammer, HMR-4

price

e Ha mm &P un ers che s ads

Pedro’s The Hammer

Park Tool Shop Hammer

• Features two-sided, heat treated tool steel head with a replaceable plastic face on one side • Dice grip handle for comfort, control, and vibration absorption description hammer

price

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s Ped a

WILLIAMS Williams Deadblow Hammer

• Ergonomically designed hard urethane construction with a non-marring nonsparking head and Hi-Vis yellow color • Deadblow feature minimizes bounce back and reduces hand fatigue • Williams, a Snap-on Company part# JH-6224 JH-6216

Fra m

PEDRO’S

part# PD-3700 NEW

C Btm rank Bra & cke t Dis cB rak e

description 24oz deadblow 16oz deadblow

Pedro’s The Hammer

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing Tire & Tub e

price

Too l

KIt

Tor q

Wh ee

lbu

Williams Deadblow Hammer

phone 800.558.8324

ild

Wr enc

hes

1247

Tools

CANE CREEK

DC-3307

Headset s che Ben ools t &S

DC-3304

Cane Creek Headset Press and Crown Race Adapters • For use with headsets with both press-in and drop-in bearing headsets • Crown race installation tools are specific to either 1-1/8” or 1.5” race usage part# DC-3301 DC-3304 DC-3307 NEW DC-3308 NEW

Cane Creek Headset Press and Crown Race Adapters

ain

FSA Star Nut Guide and Driver • • • • FSA Star Nut Guide and Driver

Star nut threads onto driver. Driver slides up into guide tube Guide tube fits over outside of 1-1/8” steerer Hammer on round end of driver until steerer contacts driver-stop Star nut is properly aligned and seated a consistent depth

part# FS-500

& t nk e Cra Brack Btm e rak cB Dis

k& For k c o Sh

price

• For removal of 1-1/8” headset cups part# LF-1014

description headset cup remover tool

price

IceToolz Crown Race Installation Tool

s& ive Kn ing tt Cu etic gn Ma

• Easy to use shop quality crown race installer • Installs 1.5”, 1-1/8” and 1” races (with adapter)

IceToolz Headset Cup Remover

part# LF-1018

re asu

price

• Shop quality crown race remover • Wedge/clamp style for easy removal

a Ped

air Rep ds n Sta s ver dri ew r c S

description crown race installer

IceToolz Crown Race Remover

ool lti T

part# LF-1020

IceToolz Crown Race Installation Tool

description crown race remover

price

IceToolz Tube-end Chamfering Tool

• Used for quickly smoothing out rough edges on cut tubing • Design allows for use on inside and outside of tubes

& Tap ading e Thr

part# LF-1025 NEW

& Tire e b u T s

KIt ue

ild

lbu

IceToolz Crown Race Remover

he enc Wr

IceToolz Tube-end Chamfering Tool

1248

description headset and headtube measuring tool headset and headtube measuring tool

IceToolz Headset Cup Remover

FSA Headset Sizing Gauges

ee Wh

model 1” and 1-1/8” 1-1/4” and 1.5”

ICETOOLZ

m Fra

q Tor

price

• Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane Creek, TH/FSA) • Includes inside gauges for headtubes and cups and outside gauges for bearings part# FS-509 FS-5091

ers mm Ha nches u &P et ads He

description star nut guide/driver tool, 1-1/8”

FSA Headset Sizing Gauges

s& File ers m a Re

l Too

price

FSA

ke Bra ble a &C te & set l Cas whee e Fre

description 1-1/8” cup adapter 1.5” cup adapter crown race installation tool, 1-1/8” crown race installation tool, 1.5”

web www.bti-usa.com

description tube-end chamfering tool

price

Park Tool Headset Cup Removal Tool • • • •

4-pronged flared end fits most headset cups Heat-treated, nickel plated steel construction Steel cap-insert accepts a lifetime of hammer blows PK-6100 fits 1”, 1-1/8”, 1-1/4” headset cups, PK-6102 fits 1-1/4” and 1.5” cups

part# PK-6100 PK-6102

description headset cup removal tool, RT-1 headset cup removal tool, RT-2

Park Tool Headset Cup Removal Tool

price

Park Tool Headset/BB Bearing Cup Press • • • • • •

For installing press fit bottom bracket and headset cups Nickel-plated, heat-treated steel construction Quick release bottom plate for easy install/removal Press-plates accommodate 1” to 1.5” headset sizes Long, rubber coated handles for comfortable use Includes (#530-2) stepped bushing cup adapters to fit most cup sizes (also available separate for older tools)

part# PK-6110

description HS/BB bearing cup press, HHP-2

Ben c & S hes too ls

Park Tool Headset/BB Bearing Cup Press

price

Park Tool Stepped Bushing Cup Adapters

• For replacement or retrofit to older bearing press tools • Multi-step adapters fit most press fit cup applications • Sold as pair description stepped bushing cup adapters, #530-2 pair

For k Sho & ck

• Simple and economical bearing cup press for the home mechanic • Will also work for installing one piece bottom bracket cups description home mechanic bearing cup press, HHP-3

Fra m

price Park Tool Home Mechanic Bearing Cup Press

Park Tool Adjustable Crown Race Puller

• Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork • Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences • Works with 1,1-1/8,1-1/4,1.5” forks (suspension or rigid) and crown races with outside diameters up to 64mm • Accepts steerers up to 430mm • All steel construction for long life part# PK-6152

description adjustable crown race puller tool, CRP-2

C Btm rank Bra & cke t Dis cB rak e Fil Rea es & me rs

price

Park Tool Home Mechanic Bearing Cup Press part# PK-6120

Br & C ake abl e Cas set Fre te & ew hee l ain

Park Tool Stepped Bushing Cup Adapters

part# PK-6112

Headset

Tools

PARK TOOL

e Ha mm &P un ers che s He

ads

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s

price

Park Tool Crown Race Setting System

• Precision tools for installing headset, fork crown races • PK-6161: 1” and 1-1/8” crown-races/steerer-tubes (Includes: (3) black 1” crown race seating adapters (3) blue 1-1/8” crown race seating adapters) • PK-6163: specifically for installing 1.5” crown races • Steel tube with steel hammer cap • Aluminum seat adapters provide precise race alignment part# PK-6161 PK-6163

description crown race setting system, CRS-1 1.5” crown race setting system, CRS-15

Ped a

Park Tool Adjustable Crown Race Puller

Tire & Tub e Too l

• Solid, knurled steel construction (5-3/8” long) • Step-down guide with replaceable threaded fixing screw • Sets threadless steerer star-nuts to a depth of 15mm description threadless star-nut setter, TNS-15 threadless star-nut setter, TNS-1 star-nut set screw for TNS-1/15

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing

price

Park Tool Threadless Star Nut Setter

part# PK-6204 PK-6201 PK-6205

Park Tool Crown Race Setting System

size 1-1/4” / 1.5” 1” / 1-1/8” N/A

KIt

Tor q

Wh ee

lbu

price

ild

Wr enc

hes

Park Tool Threadless Star Nut Setter

phone 800.558.8324

1249

Tools

PARK TOOL

Headset

Park Tool Threadless Star Nut Slide-Hammer

• Uses a built in slide-hammer guide for installation of 1” and 1-1/8” star nuts • Proper star nut alignment and depth every time • Replaceable set screw BTI# PK-6205 (#822)

Park Tool Threadless Star Nut Slide-Hammer

part# PK-6202

description threadless star-nut slide-hammer, TNS-4

price

Park Tool Head Tube Reaming and Facing Handle Set

• Set contains the handle (#736), threaded shaft (#739), quick release centering cone assembly (#740), and locking nut (#737) from the Park Tool HTR-1 Head Tube Reaming and Facing Set • Shops and can then individually order just the specific Park Tool reamers, facers, pilots and accessories for their needs

s che Ben ools t &S ke Bra ble a &C te & set l Cas whee e Fre

part# PK-6709 NEW

& t nk e Cra Brack Btm e rak cB Dis

Park Tool Head Tube Reaming and Facing Handle Set

s& File ers m a Re k& For k c o Sh e

m Fra

Park Tool Head Tube Reaming/Facing Set

PK-6721

PK-6722

part# PK-6723 PK-6722 PK-6727 PK-6724 PK-6721

ool lti T

Park Tool Reaming Cutters

a Ped

air Rep ds n Sta s ver dri ew r c S

part# PK-6726

& Tire e b u T

Park Tool Reamer/Facer Set - Integrated

price

• Designed for reaming and facing 1.5” headset frames (49.5mm x 20mm depth) • For use with the HTR-1 Head Tube reaming/facing set and the #750 XL centering cone Adapter • Combined reaming/facing cutter for 2-in-1 operation • Not designed for Cannondale (12mm depth) part# PK-6728

s KIt ue ild

lbu

hes

enc Wr

Park Tool Reamer/Facer Set - 1.5”

1250

description reamer/facer set, #756S 41mm (Integrated)

Park Tool Reamer/Facer Set - 1.5”

& Tap ading e Thr

ee Wh

price

• Designed for reaming and facing Cane Creek standard Integrated headset frames designed for 41.0mm x 36/45 degree angular contact bearing • Includes 1) lower and 1) upper reamer/facer cutters • For use with the HTR-1 head tube reaming/facing set and the #750 XL centering cone adapter • Combined reaming/facing cutters for 2-in-1 operation

q Tor

description reaming cutter, #789 - 55.95mm (1-1/2” ZS) reaming cutter, #788 - 43.95mm (1-1/8” ZS) reaming cutter, #738 - 52.1mm (1-1/2” IS) reaming cutter, #754 - 33.8mm (1-1/8”) reaming cutter, #751.2 - 30.1mm (1”)

Park Tool Reamer/Facer Set - Integrated

re asu

l Too

price

• For use with the HTR-1 head tube reaming/facing set • Can be used in conjunction with #690 facing cutter for 2-in-1 operation

s& ive Kn ing tt Cu etic gn Ma

description head tube reaming/facing set, HTR-1B

Park Tool Reaming Cutters

• Designed for reaming and/or facing head tubes for headset or head bearing installation • Heavy-Duty nickel-plated steel guide/handle • Precision, high speed tool steel reaming/facing cutters • Unique quick release/adjust spring-loaded cone guide • Includes: 33.8mm-(1-1/8”) reamer, #690 facing cutter, and (4) facing pilots (29.8mm,30.0mm,33.8mm,36.8mm) • 30.0mm-(1”) reamer, XL facing cutter, 41.0mm-(Integrated), 49.5mm-(OnePointFive) reamer/facer sets, 43.8mm pilot, and XL centeringcone adapter sold separately (1-1/4” reamer no longer available) part# PK-6710

ers mm Ha nches u &P et ads He

price

Park Tool Head Tube Reaming/Facing Set

ain

description head tube reaming and facing handle set, HTR-HS

web www.bti-usa.com

description reamer/facer set, #758S 49.5mm

price

Tools

PARK TOOL

Headset

Park Tool Reamer/Facer Set - Campagnolo

• Designed for reaming and facing Campagnolo Hiddenset and other Integrated headset frames designed for 41.8mm x 45/45 degree angular contact bearing • For use with the HTR-1 head tube reaming/facing set and the #750 XL centering cone adapter • Combined reaming/facing cutter for 2-in-1 operation part# PK-6729

description reamer/facer set, #761S 42mm (Campy)

price

Park Tool Reamer/Facer Set - Campagnolo

Ben c & S hes too ls

Park Tool Oversized Facing Cutters

• Oversized headset facing cutter for PK-6710 (HTR-1 tool set) • Designed for larger, low profile (Zero Stack) or 1.5” head tubes • Use with PK-6731/2/3 (#767/768/790 facing pilots) and PK-6735 (#750 centering cone). Sold individually part# PK-6730

description XL facing cutter, #690-XL

Br & C ake abl e Cas set Fre te & ew hee l

price

 Use with PK-6731/2 (#767/768 facing pilots) & PK-6735 (#750 centering cone adapter) PK-6737

ain

XXL facing cutter, #690-XXL

 Use with PK-6733 (#790 facing pilot) or PK-6723 (#789 reamer) & PK-6735 (#750 centering cone adapter)

Park Tool Facing Pilots

• Oversized headset facing pilots for PK-6710 (HTR-1 tool set) • PK-6731 (#767) used when facing 1.5” head tubes with an ID of 49.5mm, including those with an hour glass shaped head tube • PK-6732 (#768) designed for headtubes with an ID of 43.8mm that use a low profile, zero stack or internal headset • PK-6733 (#790) used when facing head tubes with 55.90-55.95mm ID for 1 1/2” zero stack or internal headset part# PK-6733

description facing pilot, #790 - 55.9-55.95mm

Park Tool Oversized Facing Cutters

Fil Rea es & me rs For k Sho & ck Fra m

price

 Use with PK-6737 (#690-XXL facing cutter) & PK-6735 (#750 centering cone) PK-6732

facing pilot, #768 - 43.8mm

Park Tool Facing Pilots

 Use with PK-6730 (#690-XL facing cutter) & PK-6735 (#750 centering cone) PK-6731

description XL centering cone adapter, #750.2

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s

price Park Tool XL Centering Cone Adapter

Park Tool Head Tube Reamer Extension

Ped a

Reamer extension for use on the HTR-1 tool set Increases depth on 2-piece reamer/facers (1”, 1-1/8”, 1-1/4”) to 27mm Designed for deep-insertion headset cups (Chris King Steelset) Sold individually

Rep Sta air nd s Scr ew dri ver s

description head tube reamer extension, #769

price

Thr Tap & ead ing

Park Tool Head Tube Reamer Extension

• 47mm reamer for cutting the lower head tube on frames using an IS47 bearing assembly for a 1-1/4” integrated headset • Reamer extension for use with the with the HTR-1 or HTR-1B Head Tube Reaming and Facing Set, 690-XL Facing Cutter and #750.2 Centering Cone Adapter part# PK-6741 NEW

• Oversized adapter for centering cone on PK-6710 (HTR-1 tool set) • Designed for larger head tubes (0-Stack, Integrated, 1.5) • Use with PK-6730 (#690-XL facing cutter) and PK-6731/2 (#767/768 facing pilots) or PK-6726/8 (#756S/758S reamer/facer sets). Sold individually

part# PK-6740

ads

Park Tool XL Centering Cone Adapter

• • • •

e Ha mm &P un ers che s

facing pilot, #767 - 49.5mm

 Use with PK-6730 (#690-XL facing cutter)

part# PK-6735

C Btm rank Bra & cke t Dis cB rak e

description head tube reamer extension, #799

Tire & Tub e

Park Tool Head Tube Reamer Extension

Too l

KIt

Tor q

Wh ee

price

lbu

ild

Wr enc

hes

Park Tool Head Tube Reamer Extension

phone 800.558.8324

1251

Tools

STEIN

Headset

Stein Crown Race Removal Slide Hammer • • • •

Thin-edged hardened jaws pry race from seat with vise Integrated slide hammer finishes the removal Capable for use with tapered steerers No more cheap screwdriver and hammer techniques

part# JS-1001 NEW

s che Ben ools t &S

description crown race removal slide hammer

UNDERWOOD DESIGN

Stein Crown Race Removal Slide Hammer

UDG Headset Press Adapters

ke Bra ble a &C

te & set l Cas whee e Fre

UD-5018

n hai

UD-5010

& t nk e Cra Brack Btm e rak cB Dis

• For use with 25.4mm, 34mm, 44mm, 49mm, 56mm and mixed tapered headsets • Specifically designed to install Cane Creek 110 and Chris King headsets • To be used in conjunction with the Park Tool headset press (HHP-2) or any press with 22mm diameter shaft • The 1.0” (25.4mm) and 1-1/4”(44mm) tools will also work with Chris King PF24 and PF30 bottom brackets • Machined from 6061-T651 aluminum billet to exacting tolerances then anodized to decrease wear • Frame preparation should be done in accordance to headset manufacturer part# UD-5010 NEW UD-5012 NEW UD-5014 NEW UD-5016 NEW UD-5018 NEW

UDG Headset Press Adapters

s& File ers m a Re k& For k c o Sh

description headset press adapters, 1” headset press adapters, 1-1/8” headset press adapters, 1-1/4” headset press adapters, 1-1/2” headset press adapters, 1-1/8”-1-1/2” mixed taper

ers mm Ha nches u &P et ads He

Woodman Headset Cup Press

• Steel construction for durability in the bike shop or the garage • Includes stepped bushings for 1” and 1-1/8” headsets part# WN-9950

description headset cup press tool set

• Professional grade tool for installing crown races onto fork steerers Woodman Headset Cup Press

part# WN-9958

description crown race slide hammer, 1-1/8”

asu

ool lti T

THURSDAY HACK

a Ped

Ship USPS Priority Mail on Thursday and receive your order on Saturday*

s ver

ri wd

e Scr

& Tap ading e Thr

Woodman Headset Slide Hammer

& Tire e b u T l Too

1 day

KIt

2 days 3 days

qu Tor

* Priority Mail delivers 97% on-time and features detailed tracking along the way. USPS offers no refunds for late deliveries.

ild

lbu

ee Wh

hes

enc Wr

1252

price

Woodman Headset Slide Hammer

s& ive Kn ing tt Cu etic gn Ma

air Rep ds n a t S

price

WOODMAN

m Fra

price

web www.bti-usa.com

price

Tools

ABSOLUTE BLACK • Unique hub tools for servicing Black Diamond hubs part# AI-4911 NEW

model Black Diamond

description key install/removal tool

price

Absolute Black Hub Tools

Hub

Absolute Black Hub Tools

DT-SWISS DT-Swiss Hub Tools

• Instructions are available online @ www.dtswiss.com part# DT-00010 DT-00012 DT-0001 DT-0003

model Hugi/DT-240+s, Hugi/440-FR (front/rear) 370/Onyx + Disc (front/rear) 240/340/440/540 3-pawl DT hubs

description tool kit tool kit threaded ring insert removal tool threaded ring insert removal tool

Ben c & S hes too ls

price

DT-00010

ENDURO

DT-Swiss Hub Tools

• Installs and seats against the inner race of the cartridge bearing for removal (punch from other side of tool against tool flats) • Effectively fits on cartridge bearings with 10-25mm inner race ID’s description cartridge bearing puller, 10-25mm ID

Enduro Cartridge Bearing Puller Tool

• Cap pin tool for removal and installation of cap on Cannondale Lefty hubs • For use with 1/2” drive socket description cap pin install/removal tool - Cannondale Lefty

e Ha mm &P un ers che s

price

ads

• Removes bearings from hubs and various other items • Works on bearings with an internal diameter of 8-32mm

Enduro Cannondale Lefty Hub Tool

description universal bearing puller set

price

Enduro Hub Bearing Press

• For use with all bearings including full ceramic and ceramic hybrids, where extreme care is needed • Hub press installs bearings with ease • 12 different size bearing guides included part# AB-9055

description hub bearing press

For k Sho & ck Fra m

Enduro Universal Blind Hole Bearing Puller Set part# AB-9052

ain

Fil Rea es & me rs

price

Enduro Cannondale Lefty Hub Tool part# AB-9031

C Btm rank Bra & cke t Dis cB rak e

Enduro Cartridge Bearing Puller Tool

part# AB-9000

Br & C ake abl e Cas set Fre te & ew hee l

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s Ped a

price

Rep Sta air nd s Scr ew dri ver s

Enduro Universal Blind Hole Bearing Puller Set

Thr Tap & ead ing Tire & Tub e Too l

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

Enduro Hub Bearing Press

phone 800.558.8324

1253

Tools

HALO HL-3196

HL-3184

Halo Hub Tools

Hub

• Service tools for Halo hubs part# HL-3184 HL-3196

• Holds front & rear axles securely without harming axle threads • Useful for removing nuts on axles with damaged threads

ke Bra ble a &C te & set l Cas whee e Fre

part# HZ-5354

& t nk e Cra Brack Btm e rak cB Dis

part# HZ-5503

description stepped hub cone wrench set, C-503

price

PARK TOOL

s& File ers m a Re

Park Tool Hub Bearing Press Set

k& For k c o Sh

Hozan Stepped Cone Wrench Set

m Fra

ers mm Ha nches u &P et ads He

• Designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs • Quick release design for fast tool installation and removal • Includes two bearing presses and precision machined aluminum pilots, bushings and spacers • Works with more than 20 different cartridge bearing sizes and multiple axle configurations part# PK-2609 NEW

s& ive Kn ing tt Cu etic gn Ma

• • • • •

asu

a Ped

Park Tool Hub Bearing Press Set

s ver

ri wd

& Tap ading e Thr & Tire e b u T s

KIt ue

ild

lbu

hes

enc Wr

1254

price

PK-2612: 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26 and 28mm cone wrenches Steel construction with military-grade phosphate finish Single-ended Y-head profile for strength and durability Thin enough to use on the narrowest of adjusting cones Long, vinyl-dipped handles offer comfortable leverage

part# PK-2612 PK-2613 PK-2614 PK-2615 PK-2616 PK-2617 PK-2618 PK-2619 PK-2620 PK-2621 PK-2622 PK-2623 PK-2624 PK-2626 PK-2628

ool lti T

q Tor

description hub bearing press set, HBP-1

Park Tool Shop Cone Wrenches

ee Wh

price

• Four cone wrenches in one, thanks to the stepped jaw design • One end of each wrench fits 13/14mm cones and the other fits 15/16mm • 2.4mm thick steel fits the narrowest of adjusting cones. Sold as a pair

ain

l Too

description hub axle holder, C-354

Hozan Stepped Cone Wrench Set

Hozan Hub Axle Holder

e Scr

price

Hozan Hub Axle Holder

s che Ben ools t &S

air Rep ds n Sta

description drive ring removal tool sprocket removal tool

HOZAN

Halo Hub Tools

model DJD Bush Drive DJD Bush Drive

Park Tool Shop Cone Wrenches

web www.bti-usa.com

description shop 13-28mm cone wrench set, SCW-SET.3 shop 13mm cone wrench, SCW-13 shop 14mm cone wrench, SCW-14 shop 15mm cone wrench, SCW-15 shop 16mm cone wrench, SCW-16 shop 17mm cone wrench, SCW-17 shop 18mm cone wrench, SCW-18 shop 19mm cone wrench, SCW-19 shop 20mm cone wrench, SCW-20 shop 21mm cone wrench, SCW-21 shop 22mm cone wrench, SCW-22 shop 23mm cone wrench, SCW-23 shop 24mm cone wrench, SCW-24 shop 26mm cone wrench, SCW-26 shop 28mm cone wrench, SCW-28

price

Tools

PARK TOOL Park Tool Double-Ended Cone Wrenches Nickel-plated, thin steel construction Double-ended offset head profile for easy use Thin enough to use on the narrowest of adjusting cones Small size perfect for home and/or road-side repairs Hang-card packaging

part# PK-2631 PK-2632 PK-2633 PK-2634

Hub

• • • • •

Park Tool Double-Ended Cone Wrenches

description double-ended 13/14mm cone wrench, DCW-1 double-ended 15/16mm cone wrench, DCW-2 double-ended 17/18mm cone wrench, DCW-3 double-ended 13/15mm cone wrench, DCW-4

price

Ben c & S hes too ls

Park Tool Hub Axle Vise

• Self-opening steel holder with vise-jaw wings • Aluminum jaws securely hold axles without damage • Two opening diameters for most front and rear hub axles part# PK-2651

Park Tool Hub Axle Vise

description hub axle vise, AV-1

price

ain

Park Tool Axle and Spindle Vise Inserts

C Btm rank Bra & cke t Dis cB rak e

• Hold a wide variety of axles, spindles and Park Tool freewheel remover/ lockring tools • Made from precision extruded aluminum with top retainer legs and magnets for easy bench vise use • Jaw openings for 5, 9, 10, 12, 14, 20, 25, 30, 36mm plus a mini V-block and 1” hex part# PK-2656

description axle and spindle vice inserts, AV-5

Park Tool Axle and Spindle Vise Inserts

price

Fra m

e Ha mm &P un ers che s

Rohloff Speedhub Tools

• Service kit includes the needed replacement parts for servicing and maintaining hubs (cables, bayonet links, oil change kit etc.) description Speedhub sprocket removal tool (10mm axle) Speedhub sprocket removal tool (12mm thru-axle) Speedhub shop service kit

price

ads

RH-8301

hubs (cables, bayonet links, tools, oil-change kit, etc in a in a divided plastic box with snap-shut lid)

SRAM

RH-8700

SRAM Rise, Rail, Roam-Series Hub Service Tool

• For removing/installing cartridge bearings in SRAM X0 hubs and Roam, Rail and Rise wheels description bearing press tool bearing press tool bearing press tool

model front hub - Rise XX/X0/Roam 30,40 front hub - Predictive Steering rear hub - Rise XX/X0/Roam 30,40

description Rise-40 axle conversion tool

Ped a

Rep Sta air nd s Scr ew dri ver s

price

• For removing/installing axle end caps when switching between 9mm Q/R (19mm), 9mm OS-Q/R (31mm), or 15mm thru-axle systems on Rise-40 front wheels

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s

Rohloff Speedhub Tools

Thr Tap & ead ing

SRAM Rise-40 Front Axle Conversion Tool part# GS-4593

 Complete service kit for all Rohloff Speedhub models. Includes needed replacement parts for servicing/maintaining

part# GS-4594 GS-4596 GS-4595

Fil Rea es & me rs For k Sho & ck

ROHLOFF

part# RH-8301 RH-8305 NEW RH-8700

Br & C ake abl e Cas set Fre te & ew hee l

Tire & Tub e

SRAM Rise, Rail, Roam-Series Hub Service Tool

price

Too l

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

SRAM Rise-40 Front Axle Conversion Tool

phone 800.558.8324

1255

Tools

STEIN Stein Hub Axle Vise

Hub

• Axle vise for 9mm-front and 10mm-rear hub axles part# JS-2500

Sturmey Archer Hub Spanners/Wrenches

s che Ben ools t &S

• Shop grade heat-treated steel spanners and wrenches with rubberized handles part# UR-9941 UR-9942 UR-9944 UR-9947

ke Bra ble a &C

te & set l Cas whee e Fre

& t nk e Cra Brack Btm e rak cB Dis s& File ers m a Re

UR-9944

UR-9947

UR-9941

Sturmey Archer Hub Spanners/Wrenches

• Installs 16 bearing sizes including 3 different bottom bracket bearings: 2437, 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904 • Includes T-handles with Acme threaded rods, wood base with dowels for holding adapters, 16 bearing installation drifts, 3 “speed spacers” and 2 linkage offsets for full suspension bearing installation • Made in the USA part# WZ-9991

m Fra

ers mm Ha nches u &P et ads He

description sealed bearing press, PRESS-1

• Works in conjunction with Wheels Mfg sealed bearing press (BTI #WZ-9991) to install 10mm ID and larger bearings into hubs with shouldered axles, always pressing simultaneously on both the inner and outer race of the bearing and preventing damage during the installation process • Includes adapters for 12 different bearing sizes ranging from 10mm to 20mm: 6900,6000 (10mm ID); 6901,6001 (12mm ID); 6802,6902,6002 (15mm ID); 6803,6903,6003 (17mm ID); 6804,6904 (20mm ID) • Made in the USA

s& ive Kn ing tt Cu etic gn Ma

part# WZ-9993

re asu

description over axle bearing press adapter kit, PRESS-3

ool lti T

a Ped

Wheels Sealed Bearing Press

& Tap ading e Thr & Tire e b u T s

BTI’s factory-trained technicians can expertly service and custom tune most major suspension and disc brake products. Reasonable labor rates and fast turnaround. See page 6 for details.

KIt ue

q Tor

ild

lbu

ee Wh

hes

enc Wr

1256

price

Wheels Over Axle Bearing Press Adapter Kit

air Rep ds n Sta s ver dri ew r c S

price

Wheels Sealed Bearing Press

UR-9942

k& For k c o Sh

description HTR145 classic ball ring spanner, S30,S50 HTR146 8-speed ball ring spanner, S80(W) HTR139 Dynamo cap spanner, 2x34mm HTR142 hub cone wrench, 23mm

WHEELS MFG

ain

l Too

price

STURMEY ARCHER

Stein Hub Axle Vise

description hub axle vise, 9/10mm

Wheels Over Axle Bearing Press Adapter Kit

web www.bti-usa.com

price

Tools

Knives & Cutting

BAHCO Bahco Hacksaws

• Professional Ergo: features an ergonomic design with a high blade tension for straight accurate cuts (accepts 12” blade only). Alternative 55 degree blade mounting for flush cutting. Single touch spring loaded blade release mechanism for blade changes. Bi-metal blade included • Bahco, a Snap-on Company part# JH-5013

description Professional Ergo hacksaw

Bahco Hacksaws

price

Ben c & S hes too ls

Bahco Mini Extendable Internal Hacksaw

• Blade position adjusts for maximum versatility for difficult to reach positions • Comes with 10 inch bi-metal blade (24 tpi) • Bahco, a Snap-on Company part# JH-5018

description internal hacksaw

Br & C ake abl e Cas set Fre te & ew hee l

price

Bahco Replacement Hacksaw Blades

• Replacement blades for 12” hacksaws • Blade back made of strong, flexible spring steel with a tooth line of super high speed steel • Bi-metal: precision ground teeth for all kinds of metal sawing • Tungsten Carbide: specifically designed for cutting carbon fiber • Bahco, a Snap-on Company part# JH-5029 JH-5026 JH-5025

description Tungsten Carbide bi-metal bi-metal

length 12” 12” 12”

teeth n/a 32tpi 24tpi

Bahco Mini Extendable Internal Hacksaw

GENERAL TOOLS Classic design with anti-friction, flare groove rollers for precision cuts Replaceable, hardened alloy-steel cutting wheel Hardened steel retractable/lockable deburring blade Works on 3mm-30mm tubing diameters (replacement cutting wheel available separately BTI# GT-0121) description standard tubing cutter/deburrer, 3-30mm replacement cutting wheel, GT-0120/0129 pr

For k Sho & ck Fra m

e Ha mm &P un ers che s

General Tools Standard Tubing Cutter/Deburrer

part# GT-0120 GT-0121

ain

C Btm rank Bra & cke t Dis cB rak e Fil Rea es & me rs

price

Bahco Replacement Hacksaw Blades

• • • •

ads

price General Tools Standard Tubing Cutter/Deburrer

PARK TOOL Park Tool Shop Scissors

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s Ped a

• Made of stainless steel blades and dual density grips part# PK-6800

description shop scissors, SZR-1

Rep Sta air nd s Scr ew dri ver s

price

Park Tool Utility Knife

• Made of aluminum and stainless steel • Uses readily available hardware store replacement blades part# PK-6801

description utility knife, UK-1

price

Park Tool Shop Scissors

Thr Tap & ead ing Tire & Tub e Too l

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

Park Tool Utility Knife

phone 800.558.8324

1257

Tools

PARK TOOL

Knives & Cutting

Park Tool Hacksaw

• Aluminum diecast frame construction • Includes blade tension adjuster and comfortable handle and one replacement blade • Will accept any 12” (300mm) hacksaw blade part# PK-8020

• 12” Tungsten steel hacksaw blade specifically designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. • Fits Park Tool SAW-1 hacksaw (PK-8020) and most other 12” hacksaws

ke Bra ble a &C te & set l Cas whee e Fre

part# PK-8025

description tungsten 12” hacksaw blade, CSB-1

• • • • •

ain

Park Tool Hacksaw Blade

Environmentally safe metal cutting fluid Effective and safe for all metals (except magnesium) Extends tool life and speeds cutting time Use for reaming, facing, tapping, and/or cutting metals 8oz pump-spray bottle for easy dispensing

part# PK-8742

description cutting fluid, CF-1 (8oz spray)

s& File ers m a Re

PEDRO’S

k& For k c o Sh

Pedro’s Utility Knife • • • •

m Fra

ers mm Ha nches u &P et ads He

price

High quality alloy/steel construction to increase durability Folding design locks open during use Clip on backside allows easy storage Uses standard replaceable blades

part# PD-4000 NEW

description utility knife

color black/silver

s& ive Kn ing tt Cu etic gn Ma

Stein Bench Vise Knurling Tool

Park Tool Cutting Fluid

• • • •

asu

ool lti T

Works with bench vise to produce knurling (ridges) Effective diameter enlargement for loose fitting parts Improves interference (grip) by up to 0.5mm Works great on crown-races, seatposts, handlebars

part# JS-0115

description bench vise knurling tool

a Ped

air Rep ds n Sta s ver dri ew r c S

Pedro’s Utility Knife

& Tap ading e Thr

STOCK ALERT!

& Tire e b u T

Click the Stock Alert button on the BTI website and our real-time inventory system will send you an email when out-of-stock items are replenished. It’s fully automated and easy to use. First come, first served upon final Stock Alert notification.

s KIt

l Too

q Tor

ild

lbu

ee Wh

hes

enc Wr

1258

price

STEIN

price

Park Tool Cutting Fluid

& t nk e Cra Brack Btm e rak cB Dis

price

Park Tool Hacksaw Blade

Park Tool Hacksaw

s che Ben ools t &S

description 12” hacksaw, SAW-1

Stein Bench Vise Knurling Tool

web www.bti-usa.com

price

Tools

Magnetic

GENERAL TOOLS General Tools Telescoping Magnetic Pickup Pen • • • •

Telescoping magnetic (pen) tool with pocket clip Ideal for retrieving hard-to-reach, ferrous-metal objects Powerful magnetic tip will hold up to a 2lb object 5-1/2” long tool with up to 23-1/2” full extension

part# GT-0383

General Tools Telescoping Magnetic Pickup Pen

description telescoping magnetic pickup pen, 5-23.5”

price

General Tools Magnetizer/Demagnetizer Block

Ben c & S hes too ls

• Cadmium-free magnetizer/demagnetizer design • Housed in shock-resistant high quality plastic • Dimensions: 2.1” x 2.0” x 1.1” (.30 lb) part# GT-0360

description magnetizer/demagnetizer block

Br & C ake abl e Cas set Fre te & ew hee l

price

PARK TOOL

General Tools Magnetizer/Demagnetizer Block

Park Tool Magnetic Parts Bowl

ain

C Btm rank Bra & cke t Dis cB rak e

• Bench top bowl features a 6” (15cm) diameter and extra strong magnet part# PK-8102

description magnetic parts bowl, MB-1

price

Fil Rea es & me rs For k Sho & ck Fra m

e Ha mm &P un ers che s

Park Tool Magnetic Parts Bowl

ads

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s

PARK TOOL Park Tool Big Blue Book of Bike Repair

• Calvin Jones, Education Director at Park Tool, provides easy-to-follow, step-bystep instructions for keeping any road or mountain bike running smoothly • Special topics such as tool selection, bike cleaning, and on-the-trail repairs are also covered, and an appendix at the back of the book provides valuable reference materials. Up to date with the latest technology • Packed with hundreds of photos, as well as repair tips garnered from the author’s 30+ years as an educator and mechanic part# PK-1091

title Big Blue Book of Bike Repair 3rd Edition, BBB-3

price

Ped a

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing Tire & Tub e Too l

Park Tool Big Blue Book of Bike Repair

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

phone 800.558.8324

1259

Tools

Measure

ELDI Eldi Thread Gauge

• Thread pitch gauge for: Metric, English (SAE), and Whitworth • 48 sizing blades identify virtually all thread profiles

Eldi Thread Gauge

part# LD-23490

description thread gauge, Metric/SAE/Whitworth

price

Eldi Economy Caliper s che Ben ools t &S

• Reads both inside and outside measurements • English (SAE) and metric scales for easy comparison • Great low-cost caliper for consumer and/or floor sales

Eldi Economy Caliper

part# LD-54100

ke Bra ble a &C

te & set l Cas whee e Fre

Feedback Sports Hanging Alpine Digital Scale

ain

• Designed to weigh bicycles, backpacks and other outdoor sports equipment • Design enables scale to be clamped into a bicycle repair stand or hung from the ceiling with the top loop • 10g (0.02 lb) display resolution with a 25kg (55 lb) maximum capacity and 50g minimum capacity • Easy to read LCD display with a shock-resistant housing and vinyl coated hook • Zero/Tare function, kg/lb selection, auto shut-off saves power • Four AAA batteries included

& t nk e Cra Brack Btm e rak cB Dis s& File ers m a Re k& For k c o Sh

part# FB-1005

ers mm Ha nches u &P et ads He

• 26-leaf feeler gauge set (great for disc brake pad setting) • Both SAE and Metric measurements listed on each blade • Sizes: .0015, .002, .0025, .003, .004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024, .025” • Metric range: .037mm to .635mm

Feedback Sports Hanging Alpine Digital Scale

• • • • • •

ols

i To l

a Ped

General Tools Composite Metric Dial Caliper

q Tor

• • • • • •

hes

enc Wr

General Tools Metric/SAE Precision Caliper

1260

description composite dial caliper, metric - 150mm

price

Shop-quality stainless steel construction vernier caliper Scales read in Metric and English (SAE) for comparison Measures inside, outside, depth, and step dimensions Extra long design with depth gauge and auto thumb lock Accurate to .05mm with a 150mm capacity Permanent (black) graduations with conversion table on back of tool, plastic case and instructions included

part# GT-6001

ild

lbu

ee Wh

price

General Tools Metric/SAE Precision Caliper

& Tire e b u T KIt

description feeler gauge set, 26-leaf (.0015-.025”)

Precision dial caliper, reinforced fiberglass construction Adjustable bezel, graduated dial reads in Metric 0.1mm Measures inside, outside, depth, and step dimensions Accurate to 0.1mm with a 150mm capacity Freewheeling friction thumb-roller for accurate readings Fractional conversion table on back of tool (plastic case and instructions included)

part# GT-6000

General Tools Feeler Gauge Set

& Tap ading e Thr

l Too

part# GT-0230

General Tools Composite Metric Dial Caliper

asu

air Rep ds n Sta s ver dri ew r c S

price

General Tools Feeler Gauge Set

lt Mu

description digital bicycle scale

GENERAL TOOLS

m Fra

price

FEEDBACK SPORTS

s& ive Kn ing tt Cu etic gn Ma

description economy calipers, Metric/English

web www.bti-usa.com

description precision caliper Metric/SAE - 150mm

price

Tools

Measure

GENERAL TOOLS General Tools Digital Caliper, Polymid • • • • • • •

Swiss precision crafted Precision digital caliper made with fiberglass reinforced polymid Digital (LCD) readout with adjustable zero setting Measures inside, outside, depth, and step dimensions Converts between Metric and SAE at the push of a button Accurate to 0.1mm with a 150mm capacity Freewheeling friction thumb-roller for easy readings

part# GT-6003

General Tools Digital Caliper, Polymid

description digital caliper, polymid: metric-150mm

price Ben c & S hes too ls

PARK TOOL

Br & C ake abl e Cas set Fre te & ew hee l

Park Tool Digital Caliper

• Precision instrument built with stainless steel mechanisms and a rugged ABS composite body accurately measures internal, external, depth and stepped dimensions • Displays metric, decimal standard and fractional standard to 1/128” • Resolution: +/- 0.01mm/0.0005” / 1/128” • Accuracy: +/- 0.02mm/0.0001 (-100mm) • Features a large LCD display and includes protective case and battery part# PK-1413

description digital caliper, DC-1

Park Tool Digital Caliper

ain

C Btm rank Bra & cke t Dis cB rak e

price

Fil Rea es & me rs

Park Tool Digital Scales

• Versatile digital scales built to accurately weigh bikes, frames and components • DS-1 hanging scale designed to be clamped into a repair stand or hung from the silicone coated hook • DS-1 measures in pounds and kilograms to the tenth position up to 25kg (55lb) • DS-2 tabletop scale is perfect for weighing small parts and components and includes a tare function to exclude weight of container • DS-2 easily switches between grams and ounces and has a 3000g (106oz) capacity part# PK-1415 PK-1417

description digital bike scale, DS-1 tabletop digital scale, DS-2

Fra m

e Ha mm &P un ers che s

price

ads

PK-1415

Park Tool Tape Measure

PK-1417

• Includes both Metric and SAE readings up to 12ft (3.65M) part# PK-8000

For k Sho & ck

Park Tool Digital Scales

description tape measure, RR-12

price

Park Tool Chainring Diameter Gauge

• Made of anodized aluminum and permanently laser engraved • Easily measures BCD for a wide variety of common four and five bolt chainring patterns • Includes a center to center (C-C) measuring scale and reference chart for determining the BCD for less common chainring patterns part# PK-8200

description chainring diameter gauge, DCG-2

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s Ped a

price Park Tool Tape Measure

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing Tire & Tub e

SAME DAY SHIPPING

Too l

• SEPTEMBER - FEBRUARY | 3pm Mountain • MARCH - AUGUST | 4pm Mountain • AK, HI, CA, OR, WA, ID, NV, AZ | add 1 hour (4pm mtn fall/winter schedule, 5pm mtn spring/summer schedule)

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

Park Tool Chainring Diameter Gauge

phone 800.558.8324

1261

Tools

Measure

PHIL WOOD Phil Wood Mechanics Scale

• California Bicycle Products Group 6” mechanics pocket scale • Includes Metric and SAE scales and logos of the CBPG part# PW-4006 Phil Wood Mechanics Scale

description mechanics scale

WHEELS MFG

s che Ben ools t &S

Wheels Bench Mount Axle/Cone Ruler

• Anodized aluminum construction. Includes mounting hardware • Measures threads for all cones, locknuts and axles • Metric measurement on one side and Standard on the other side

ke Bra ble a &C te & set l Cas whee e Fre

part# WZ-9500

description bench mount axle/cone ruler

price

Wheels Bench Cartridge/Ball Bearing Ruler

ain

• • • •

& t nk e Cra Brack Btm e rak cB Dis s& File ers m a Re

Wheels Bench Mount Axle/Cone Ruler

Anodized aluminum construction. Includes mounting hardware Measures the diameter of loose ball bearings Measures the inner and outer diameter of cartridge bearings Metric and Standard measurements

part# WZ-9600

description bench mount cartridge/ball bearing ruler

k& For k c o Sh e

m Fra

ers mm Ha nches u &P et ads He b

s& ive Kn ing tt Cu etic gn Ma re

asu

ols

i To

lt Mu

Wheels Bench Cartridge/Ball Bearing Ruler

a Ped

air Rep ds n Sta s ver dri ew r c S & Tap ading e Thr & Tire e b u T s

KIt

l Too

price

q Tor

ild

lbu

ee Wh

hes

enc Wr

1262

Dominique on a Fall ride in the Taos high country

web www.bti-usa.com

price

Tools

Multi Tools

CINELLI Cinelli Folding Hex Wrench Set • • • •

Lightweight, ultra-portable, 7 function multi tool for quick roadside repairs Includes 2,2.5,3,4,5,6 hex sizes and Phillips #2 head screwdriver Chrome vanadium tools, CNC sidebars with laser etched logo 70 x 30 x 12mm

part# CN-0100 NEW

description folding hex/screwdriver, 7 function

color dark grey

price Cinelli Folding Hex Wrench Set

CRANK BROTHERS

Ben c & S hes too ls

Crank Brothers PicaPlus Multi Tool

• Investment cast stainless steel tools in a beautiful polished aluminum frame • Indexing feature locks each tool into place at 90 and 180 degree increments • Includes 2,2.5,3,4,5,6,8mm hexes, Torx T10,T25, crosshead screwdriver, 4) spoke wrenches (#0,1,2,3), 8-10sp chain breaker, plus 8 and 10mm socket wrenches. 3.6”/91mm length. 181g part# CE-9013

description PicaPlus

color silver

price

Br & C ake abl e Cas set Fre te & ew hee l

Crank Brothers PicaPlus Multi Tool

Shop quality tools use magnets to attach to the compact carrying frame Features a CO2 inflator head and chain breaker Driver bits attach to a 1/4” driver on the Y-tool Includes 2,2.5,3,4,5,6,8mm hexes, Torx T-10 and T-25, crosshead and flat screwdriver, spoke wrenches. 260g

part# CE-9018

description Y16

color silver

Fil Rea es & me rs

price

Crank Brothers Y15 Tool • • • •

description Y15

color silver

For k Sho & ck

Crank Brothers Y16 Tool

Shop quality tools use magnets to attach to the compact carrying frame Features a chain breaker Driver bits attach to a 1/4” driver on the Y-tool Includes 2,2.5,3,4,5,6,8mm hexes, Torx T-10 and T-25, crosshead and flat screwdriver, spoke wrenches. 240g

part# CE-9019 NEW

price

color gold nickel black/pink

Crank Brothers Y15 Tool

price

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s Ped a

• 6061 aluminum frame with 6051 high tensile steel tools • Includes 2,2.5,3,4,5,6,8mm hexes, Torx T-25, 1) crosshead and 1) flat screwdriver, 8mm and 10mm open wrenches, 4) spoke wrenches (#1,2,3,4), stainless chain breaker. 3.5”/89mm length. 165g description Multi-17 Multi-17 Multi-17

Rep Sta air nd s Scr ew dri ver s

Crank Brothers Multi-17 Tool

part# CE-9022 CE-9023 CE-9029 NEW

e Ha mm &P un ers che s ads

• 6061 aluminum frame with 6051 high tensile steel tools contained in a swank stainless flask • Includes 2,2.5,3,4,5,6,8mm hexes, Torx T-25, 2) crosshead and 2) flat screwdriver, 8mm and 10mm open wrenches, 4) spoke wrenches (#1,2,3,4), stainless chain breaker. 3.5”/89mm length. 175g description Multi-19 Multi-19 Multi-19

Fra m

Crank Brothers Multi-19 Tool

part# CE-9020 CE-9021 CE-9028 NEW

ain

C Btm rank Bra & cke t Dis cB rak e

Crank Brothers Y16 Tool • • • •

color gold nickel black/pink

Crank Brothers Multi-19 Tool

Thr Tap & ead ing Tire & Tub e

price

Too l

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

Crank Brothers Multi-17 Tool

phone 800.558.8324

1263

Tools

CRANK BROTHERS

Multi Tools

Crank Brothers Multi-10 Tool

• 6061 aluminum frame with 6051 high tensile steel tools • Includes 2,2.5,3,4,5,6,8mm hexes, Torx T-25, 1) crosshead and 1) flat screwdriver. 3.5”/89mm length. 124g Crank Brothers Multi-10 Tool

part# CE-9025

description Multi-10

color nickel

price

Crank Brothers Multi-5 Tool

• 6061 aluminum frame with 6051 high tensile steel tools • Includes 3,4,5,6mm hexes, 1) crosshead screw driver. 85g

s che Ben ools t &S

Crank Brothers Multi-5 Tool

ke Bra ble a &C te & set l Cas whee e Fre

price

• Includes a chain breaker with replaceable, tool hardened stainless steel pin • Steel core nylon tire lever, spoke wrench, 3,4,5,6,8mm hex bits, T25 torx bit, Philips screwdriver bit, magnetic bit extender and bottle opener • All housed beautifully in a leather and recycled inner tube pouch

Full-Windsor Breaker Cycle Tool

part# WI-2010 NEW

s& File ers m a Re

description The Breaker

price

Full-Windsor Nutter Cycle Tool

k& For k c o Sh

• Includes the essentials for making the most common bike repairs • Nylon tire lever, 15mm box head spanner, spoke wrench, 3,4,5,6,8mm hex bits, T25 torx bit, Philips and flat head screwdriver bits, magnetic bit extender and bottle opener • All housed beautifully in a leather and recycled inner tube pouch

m Fra

ers mm Ha nches u &P et ads He

part# WI-2000 NEW

Full-Windsor Nutter Cycle Tool

description The Nutter

price

ICETOOLZ

s& ive Kn ing tt Cu etic gn Ma

IceToolz Reserve 16 Multi-Tool

• Tool includes: 2,2.5,3,4,5,6,8mm hex, Torx T25, 8/9/10sp chain tool, flat head and crosshead screwdriver and tire levers part# LF-9202

asu

ool lti T

description Reserve-16 multi tool

price

IceToolz Mini-Tool with Knife

• Convenient all-in-one mini-tool • Includes: 6150 nickel-plated CrV steel (hex/crosshead); 3, 4, 5, 6mm hex wrenches; flat and crosshead screwdrivers; spanner and knife made from stainless steel; semi-serrated knife blade with position-lock; removable 10mm spanner/flat screw/bottle opener • Reinforced ABS plastic shell with graphics • 144g (5.1oz)

dal

air Rep ds n Sta s ver dri ew r c S

IceToolz Reserve 16 Multi-Tool

& Tap ading e Thr

part# LF-9205

& Tire e b u T l Too

color black

Full-Windsor Breaker Cycle Tool

ain

description Multi-5

FULL-WINDSOR

& t nk e Cra Brack Btm e rak cB Dis

part# CE-9027

description mini-tool, hex/knife/bottle/+

price

IceToolz Compact-10 Multi-Tool

• Includes: 1.5/2/2.5/3/4/5/6mm hex wrenches, 2.5mm Torx and flat and crosshead screwdrivers

KIt

IceToolz Mini-Tool with Knife

part# LF-9209

qu Tor

ild

lbu

ee Wh

hes

enc Wr

IceToolz Compact-10 Multi-Tool

1264

web www.bti-usa.com

description Compact-10 multi-tool

price

Tools

Multi Tools

PARK TOOL Park Tool Essential 9pc Tool Kit

• 9-piece economical tool kit for the casual cyclist • Includes: 3/4/5/6mm hex wrenches, tire levers (pr), vulcanizing patch kit with glue, flat-blade screwdriver, small adjustable wrench, and a compact tool wallet part# PK-3909

description Essential 9pc tool kit, WTK-1

price

Park Tool Rescue Wrench Multi Tool

• 1-piece Investment cast, nickel-plated steel construction • Smart positioning for torque on hard-to-reach areas • 9-tools-in-one: 3,4,5,6,8mm hex, 8,9,10mm box, and a flat-blade screwdriver part# PK-4001

description Rescue Wrench 9-function tool, MT-1

Park Tool Essential 9pc Tool Kit

price

Br & C ake abl e Cas set Fre te & ew hee l

Park Tool MT-10 Multi Tool

• High quality, folding take-along tool that features forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation • Includes 3,4,5 and 8mm hex wrenches, T25 Torx compatible driver, flat blade and cross tip screwdrivers, plus key ring holder part# PK-4090 NEW

description multi tool, MT-10

weight 76g

ain

Park Tool Rescue Wrench Multi Tool

C Btm rank Bra & cke t Dis cB rak e

price

Park Tool MT-20 Multi Tool

Fil Rea es & me rs

description multi tool, MT-20

weight 95g

Park Tool MT-10 Multi Tool

price

part# PK-4092 NEW

description multi tool, MT-30

weight 153g

e Ha mm &P un ers che s He

ads

Park Tool MT-20 Multi Tool

price

• High quality, folding take-along tool that features forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation • Includes 2.5,3,4,5,6 and 8mm hex wrenches, T25 and T30 Torx compatible driver, flat blade and cross tip screwdrivers, CO2 cartridge inflator adapter, plus key ring holder description multi tool, MT-40

weight 243g

• Updated version of the MTB-3 with more tools, upgraded chain tool and a sleeker, smaller size • Includes composite shell with two tire levers; 5-10sp chain tool, disc brake piston press, rotor truing tool, 1.5,2,2.5,3,4,5,6+8mm hex wrenches, T10,T25+T30 torx drivers, straight blade screwdriver, crosshead screwdriver, 8,9+10mm box wrenches, emergency pedal wrench, presta valve extension tool (4mm), bottle opener, .127,.130,.136” spoke wrenches, knife part# PK-4104

Park Tool MT-30 Multi Tool

description premium rescue multi/mini tool, MTB-3.2

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s Ped a

price

Park Tool Premium Rescue Multi Tool

Park Tool MT-40 Multi Tool

part# PK-4093 NEW

For k Sho & ck Fra m

Park Tool MT-30 Multi Tool

• High quality, folding take-along tool that features forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation • Includes 2.5,3,4,5,6 and 8mm hex wrenches, T25 and T30 Torx compatible driver, 8 and 15mm box wrenches, flat blade and cross tip screwdrivers, plus key ring holder

Ben c & S hes too ls

Park Tool MT-40 Multi Tool

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing Tire & Tub e Too l

price

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

Park Tool Premium Rescue Multi Tool

phone 800.558.8324

1265

Tools

PARK TOOL

Multi Tools

Park Tool Rescue 21pc Multi Tool

• 21-piece multi/mini-tool separates for full tool exposure • Compact, 3-piece design for easy storage and use • Includes Torx-T25, 2,2.5,3,4,5,6,8mm hex, 8,9,10mm box, (3) .127”/.130”/.136” spoke wrenches, flat-blade and crosshead screwdrivers, chainring nut wrench, crank dust cap tool, bottle opener, serrated knife blade, and 2 tire levers • Comes with Park Tool logo embroidered nylon case part# PK-4107 Park Tool Rescue 21pc Multi Tool

s che Ben ools t &S ke Bra ble a &C

• Multi/mini-tool separates for full tool exposure • 6pc includes 3,4,5,6,8mm hex wrenches and flat-blade screwdriver • 10 pc includes 1.5,2,2.5,3,4,5,6,8mm hex wrenches, T25 Torx wrench, and flatblade screwdriver • Low profile tools are slimmer, lighter and more compact versions of the original I-Beams • Mini Fold-Up with chain tool includes 1.5,2,2.5,3,4,5,6,8mm hex wrenches, T25 Torx wrench, flat blade screwdriver, tire lever, (2) spoke wrenches and 10spd compatible chain tool

PK-4132

ain

PK-4131

s& File ers m a Re

Park Tool I-Beam Multi/Mini Tools

part# PK-4136

Fra

ers mm Ha nches u &P et ads He

part# PK-4137

s& ive Kn ing tt Cu etic gn Ma

price

• Super-tough, lightweight composite body/handle • Folding design for compact storage and use • 1.5,2,2.5,3,4,5,6mm heat-treated steel hex wrenches

Park Tool Micro Fold Up Multi Tool

a Ped

part# PD-2002 s ver

& Tap ading e Thr & Tire e b u T

description folding hex wrench set

weight 105g

price

Pedro’s Trixie Multi Tool

ri wd

Pedro’s Folding Hex Wrench Set

• Features 4mm/5mm hex, 8, 9, 10, and 15mm box end wrenches, lockring wrench, and bottle opener • Made from 5mm thick heat-treated tool steel for strength and long-lasting performance • Mounts to frame’s bottle cage mount with including wing bolts • 187mm length and ergonomic shape provide excellent leverage and comfort part# PD-2026 NEW

KIt ue

ild

lbu

hes

enc Wr

Pedro’s Trixie Multi Tool

1266

description micro fold up multi tool, AWS-13

Pedro’s Folding Hex Wrench Set

ool lti T

ee Wh

price

PEDRO’S

q Tor

description mini fold up multi tool, AWS-14

Park Tool Mini Fold Up Multi Tool

asu

l Too

price

• Micro-sized (57mm/ 2.25”) fold up tool that features 3, 4, 5mm hex wrenches, T25 Torx compatible wrench, combo screwdriver, and key ring-all in a super tough composite handle

e Scr

weight 170g 107g 88g

Park Tool Micro Fold Up Multi Tool

air Rep ds n Sta

description I-Beam Mini Fold-up w/ chain tool, IB-3 I-Beam 10pc multi/mini tool, IB-2 I-Beam 6pc multi/mini tool, IB-1

• Mini-sized (66mm/ 2.6”) fold up tool that features 3, 4, 5mm hex wrenches, T25 Torx compatible wrench, combo screwdriver, and key ring-all in a super tough composite handle

part# PK-4133 PK-4132 PK-4131

Park Tool Mini Fold Up Multi Tool

PK-4133

k& For k c o Sh

price

Park Tool I-Beam Multi/Mini Tools

te & set l Cas whee e Fre

& t nk e Cra Brack Btm e rak cB Dis

description Rescue 21pc multi/mini tool, MTB-7

web www.bti-usa.com

description Trixie multi tool

price

Tools

Multi Tools

SOMA Soma Woodie 11 Function Multi-Tool

• Chrome-vanadium steel for added hardness and torque ability • Very compact, and still user friendly • Includes 2,2.5,3,4,5,6,8mm hexes, Torx T-25, 1) crosshead and 1) flat screwdriver, 8-10 speed chain tool part# SF-9003

description Woodie 11-function

price

Soma Woodie 10 Function Multi-Tool

description Woodie 10-function

Soma Woodie 11 Function Multi-Tool

Br & C ake abl e Cas set Fre te & ew hee l

price

Soma Woodie 8 Function Multi-Tool

• Chrome-vanadium steel for added hardness and torque ability • Very compact, and still user friendly • Includes 2,2.5,3,4,5,6mm hexes, 1) crosshead and 1) flat screwdriver part# SF-9007

ain

description Woodie 8-function

price

C Btm rank Bra & cke t Dis cB rak e

Soma Woodie 10 Function Multi-Tool

Soma Lo-Pro 8 Function Mini Tool

Fil Rea es & me rs

• Super low-profile tool with a smaller footprint than a credit card • All steel construction • Includes 2,3,4,5,6mm hexes, T25 torx, 1) crosshead and 1) flat screwdriver part# SF-9016

description Lo-Pro 8-function mini-tool

price Soma Woodie 8 Function Multi-Tool

e Ha mm &P un ers che s

Topeak Alien-II Folding Tool

• 27 function tool: Torx T25 bit, 2,2.5,3,4,5,6,8 mm hex wrenches, 8,9,10 mm hex bolt box wrenches (each 2pcs), flathead and crosshead screwdrivers, chain tool, mini pedal wrench, 14 and 15g spoke wrenches, 2 tire levers, stainless knife, bottle opener, 10mm hex socket for Shimano’s new LX crank bolt and a compartment for two chain pins • Includes Clip Bag carrying case • 3.4” x 1.7” x 1.6”. 270g description Alien-II folding tool, 27 function

ads

Soma Lo-Pro 8 Function Mini Tool

price

Topeak Alien-II Folding Tool

• 20 functions: 2,2L,2.5,3,4,5,6,8,10mm hexes, Torx T10/T25, 14g, 15g, Mavic M7 spoke wrenches, chain tool, chain pin breaker, chain hook, aluminum tire lever, crosshead and flat screwdrivers and a bottle opener • Hardened steel tools with forged aluminum body, neoprene case. 150g description Mini 20 Pro folding tool, 20 function

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing

Topeak Hexus-II Folding Tool

part# TZ-1005

description Hexus-II folding tool, 16 function

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s Ped a

price

• 16 hardened steel tools: 2,2.2,3,4,4,5,6,8mm hexes, Torx T25, 14g/15g spoke wrenches, (2) tire levers, chain tool, chain hook, crosshead and flat screwdrivers • 9.5 x 4.4 x 2.6cm. 167g

Topeak Mini 20 Pro Folding Tool

part# TZ-0113

For k Sho & ck Fra m

TOPEAK

part# TZ-0101

Ben c & S hes too ls

Topeak Mini 20 Pro Folding Tool

Tire & Tub e

price

Too l

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

Topeak Hexus-II Folding Tool

phone 800.558.8324

1267

Tools

HOZAN

Pedal

Hozan Pedal Wrench

• Professional quality drop-forged chrome vanadium steel, 15mm on both ends • Double ended wrench with one 90 degree jaw and one straight jaw

Hozan Pedal Wrench

part# HZ-2200

description pedal wrench, 15mm, C-200

price

ICETOOLZ s che Ben ools t &S

IceToolz 15mm Combination Pedal Wrench

ke Bra ble a &C te & set l Cas whee e Fre

IceToolz 15mm Combination Pedal Wrench

part# LF-7205

IceToolz 15mm and 9/16” Combination Pedal Wrench

price

• Track lockring remover with pedal wrench and separate chainwhip too!

m Fra

ers mm Ha nches u &P et ads He

part# PY-9225

Pake Track Tool and Chainwhip

s ive Kn ing tt u C etic gn Ma re

Park Tool 15mm Pedal Wrench

description pedal wrench, 15mm-9/16” - PW-3

price

Park Tool Professional Pedal Wrench

• • • • •

a Ped

air Rep ds n Sta s ver dri ew r c S & Tap ading e Thr

Professional-quality shop tool Dual, 15mm and 9/16” open wrench for pedal axle flats 90-degree offset head for optimum advantage CrMo steel head welded to tubular handle Vinyl-coated (tubular) handle for high leverage and comfort

part# PK-5403

asu

price

PARK TOOL • • • • •

ool lti T

description lockring remover with pedal wrench

Park Tool 15mm Pedal Wrench

Professional-quality heavy-use shop tool Dual, 15mm-open wrench for pedal axle flats 30/45-degree asymmetrical head for optimum advantage CrMo steel head welded to 14” tubular handle Vinyl-coated (tubular) handle for high leverage and comfort

part# PK-5404 Park Tool Professional Pedal Wrench

& Tire e b u T

description Professional 15mm pedal wrench, PW-4

price

Park Tool Home Mechanic Pedal Wrench

• Perfect for the home workshop or event tool box • Made from heat-treated spring steel and vinyl dipped for comfort • 11 1/2in. (29 cm) long and weighs 9 oz.

KIt

part# PK-5405

qu Tor

ild

lbu

ee Wh

description 15mm and 9/16” combination pedal wrench

Pake Track Lockring Remover with Pedal Wrench and Chainwhip

k& For k c o Sh

l Too

part# LF-7206 NEW

PAKE

s& File ers m a Re

price

• Combination 15mm and 9/16” pedal wrench • Heat-treated CrMo steel with Kraton grip for added comfort

ain

description 15mm combination pedal wrench

IceToolz 15mm and 9/16” Combination Pedal Wrench

& t nk e Cra Brack Btm e rak cB Dis

• 15mm pedal wrench with 14mm and 15mm box end wrenches for crank fixing bolts and axle nuts • Heat-treated CrMo steel with Kraton grip for added comfort

hes

enc Wr

1268

Park Tool Home Mechanic Pedal Wrench

web www.bti-usa.com

description Home Mechanic 15mm pedal wrench, PW-5

price

Tools

PARK TOOL

Pedal

Park Tool Dummy Pedal

• Takes the place of a pedal when making adjustments during bike assembly • DP-1: Much quicker and easier than threading and unthreading a pedal • DP-2: Threaded for those desiring more positive engagement with crank arm threads part# PK-5407 PK-5406

description threaded dummy pedal, DP-2 friction fit dummy pedal, DP-1

price Park Tool Dummy Pedal

Park Tool Crowfoot Pedal Wrench

Ben c & S hes too ls

• Laser cut, heat treated and plated for long life • Used with any 3/8” drive torque wrench to verify pedals are torqued to the correct specification part# PK-5411

description crowfoot pedal wrench, TWB-15

Br & C ake abl e Cas set Fre te & ew hee l

price

Park Tool 15mm Pedal Wrench and Chain Whip • • • •

Professional quality shop tool Heat-treated steel with die and/or laser cut openings Double-ended Y-head profile for proven strength 15mm-open (Pedal) and chain whip ends

part# PK-5916

ain

Park Tool Crowfoot Pedal Wrench

description 15mm pedal wrench + chain whip, HCW-16

price

Fil Rea es & me rs

PEDRO’S

For k Sho & ck

Pedro’s Apprentice Pedal Wrench • • • •

Made of heat-treated steel (300mm length) Smaller lightweight design for travel and toolbox storage Hand-saving No-Slip plastic grip Ergonomic design for maximum leverage and comfort

part# PD-3014 NEW

Fra m

description Apprentice pedal wrench

price

Park Tool 15mm Pedal Wrench and Chain Whip

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s

Extra-long (350mm) length with rubber, dice-grip handle Pro-quality heat-treated CrMo steel 30-degree head with precision cut for an exact fit Ergonomic design for maximum leverage and comfort

part# PD-3017

e Ha mm &P un ers che s ads

Pedro’s Equalizer-Pro Pedal Wrench • • • •

C Btm rank Bra & cke t Dis cB rak e

description Equalizer-Pro pedal wrench, 15mm

price

Ped a

Pedro’s Apprentice Pedal Wrench

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing Tire & Tub e Too l

MORE WAYS TO SEARCH Search online at bti-usa.com by manufacturer part number, UPC code or even by description.

Pedro’s Equalizer-Pro Pedal Wrench

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

phone 800.558.8324

1269

Tools

FINISH LINE

Repair Stands

Finish Line Absorb-It Mat

• Perfect way to trap and absorb chain lube, cleaners, degreasers, brake fluids, and other liquids and spills that come along with bike maintenance • Made of absorbing fibers with leak-proof poly backing • Able to be trimmed to allow for customizable sizing part# FL-9501 NEW FL-9500 NEW

s che Ben ools t &S

Finish Line Absorb-It Mat

ke Bra ble a &C te & set l Cas whee e Fre

part# PK-1104

ers mm Ha nches u &P et ads He

• • • •

s& ive Kn ing tt Cu etic gn Ma

• • •

PK-1110 PK-1109

•

re asu s

ool lti T l

a Ped

air Rep ds n Sta s ver dri ew r c S

PK-1504

PK-1500 Park Tool #106 Work Tray ild

lbu

price

part# PK-1500 PK-1501 PK-1504

description #106 work tray #106 accessory collar, #106-AC #1707.2 work tray collar, #1707.2

price

Park Tool PRS-15 Towel Holder

• PRS-15 repair-stand mounted paper/shop-towel holder • Mounts to top of stand providing an arm for paper/shop-towel rolls

s che

en Wr

part# PK-1502

description PTH-1 towel holder for PRS-15 stand

 Use PK-1501 (#106-AC) to adapt paper towel holder to the PCS-1/4/9

Park Tool PRS-15 Towel Holder

1270

description home mechanic repair stand, PCS-10 home mechanic repair stand, PCS-9

• A work stand accessory built to keep tools, lubes and spare parts close at hand • Fits the Park Tool PRS-15, PCS-10 and PCS-11 repair stands • #106-AC accessory collar (PK-1501) will allow tray to be mounted to PCS-1, PCS-4 and PCS-9 repair stands • #106-AC will also adapt the paper towel holder to PCS-1/4/9 stands • #1707.2 collar (PK-1504) will allow tray to be mounted to pre-2012 PRS-20 and PRS-21 stands

PK-1501

price

Park Tool #106 Work Tray

Park Tool Home Mechanic Repair Stand

& Tap ading e Thr

q Tor

description height extension+Q/R kit, 21” (PCS-1/4)

Home mechanic quality, 3-point leg/base, folding floor repair stand Height adjustable from 40”-60” (100cm-150cm) Clamp fits tubes from 7/8” to 3” (24mm-76mm) Infinite 360-degree head rotation with easy flip-handle, tapered rotational locking system Powder coated, steel tube construction for long life Folds to 41” in length for easy storage and transport PCS-10 includes Q/R clamp and height adjust, leg storage clip and Q/R and locking sliding yoke for fast folding and extra stability PCS-9 includes screw type clamp, non-Q/R folding legs and height adjust (Park Tool quality in an entry level stand)

part# PK-1110 PK-1109

ee Wh

part# PK-1514

Park Tool Home Mechanic Repair Stand

price

• Designed for PCS-4 stands with position-set height and/or PCS-1 (‘02 & prior) stands without height adjust • Extension tube with quick release collar adds up to 21” height Park Tool PCS-1/4 Height Extension+Q/R Kit

m Fra

description deluxe home mechanic repair stand, PCS-4.1

Park Tool PCS-1/4 Height Extension+Q/R Kit

Park Tool Deluxe Home Mechanic Repair Stand

k& For k c o Sh

l KI Too

PARK TOOL Deluxe, Home Mechanic quality, folding floor repair stand Height adjustable with quick release collar from 53”-67” Cast aluminum, adjustable linkage clamp/head design Infinite 360-degree head rotation with easy flip-handle, tapered rotational locking system (fits up to 1-5/8”) • Powder coated, steel tube construction for long life • Updated, stabilizer leg design for non-tip security • Folding design offers easy storage, just lift and fold

& t nk e Cra Brack Btm e rak cB Dis

& Tire e b u T

price

• • • •

ain

size 36” x 60” 18” x 48”

Park Tool Deluxe Home Mechanic Repair Stand

s& File ers m a Re

description Absorb-It Mat, large Absorb-It Mat, small

web www.bti-usa.com

price

Tools

PARK TOOL

Repair Stands

Park Tool Team Issue Repair Stand

• 100-25D Professional Micro Adjust Clamp quickly clamps and releases nearly any tube from 7/8” to 3” (23-76mm), including aero tubes • Fully adjustable clamping pressure • Narrow clamping jaws (2.7”/7cm) fit into tight areas or on short seat posts • 360-degree clamp rotation • Soft, durable composite rubber clamping pads • Saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Three-point leg system creates a stable base on smooth or rough surfaces • Quickly and easily folds to 47” • Clamping height adjusts up to 60” • Proprietary ‘Hexatude’ hex-shaped aluminum tubing ensures low flex and no rotation • Aluminum leg straps ensure all parts slide, fold and unfold together • Weighs just 13 pounds (6 kg) part# PK-1122

description team issue repair stand, PRS-25

• • • •

Team/professional/race quality, folding floor repair stand Built with steel joints and pivots and aluminum to save weight Euro-style work stand holds bike without clamping to tubes/seatpost Quick release (front or rear) dropout mount secures bike while stabilized at vinyl-coated bottom bracket cradle with quick release retention strap Built-in ‘sleeping hub’ allows for chain cleaning with wheel removed 360-degree horizontal rotation for easy access to both sides of bike Stable tripod base with BB-height adjustment from 28-38” (71-96cm) 13.5lbs: folds to 33” (84cm) in length for transport/storage

part# PK-1121

Br & C ake abl e Cas set Fre te & ew hee l

price

Park Tool Super Lite Team Race Repair Stand • • • •

Ben c & S hes too ls

description super lite team race repair stand, PRS-21

Park Tool Team Issue Repair Stand

ain

C Btm rank Bra & cke t Dis cB rak e Fil Rea es & me rs For k Sho & ck

price

Fra m

Park Tool 1728-TA Thru-Axle Adapter

• Converts any PRS-20, PRS-21 or PRS-23 Team Race Stand to accept 15 and 20mm thru-axles part# PK-1505

description sliding thru-axle adapter, 1728-TA

price

description BAG-15 storage/transport bag for PRS-15 stand BAG-20 storage/transport bag for PRS-20 stand

price

Park Tool Professional 1-Arm Repair Stand

• Professional, shop quality, base/floor-mount repair stand • Comes with cast aluminum compartmentalized tool tray • Heavy duty lock block system allows clamping height to be quickly and easily adjusted from 50” to 62” (128-158cm) without tools. Also includes a new height adjustment pin which locks into place for safety and so it won’t be lost • The 100-3D Micro-Adjust Clamp grips nearly any tube from 7/8” to 3” (2376mm), including aero tubes • Infinite 360-degree head rotation with tension-lever, cylindrical rotational locking system (fits up to 1-5/8”) • Oversize, chrome-plated/welded steel tube construction description professional single arm repair stand, PRS3.2-2

Park Tool Storage/Transport Bags

Ped a

Rep Sta air nd s Scr ew dri ver s Thr Tap & ead ing Tire & Tub e

price

Too l

 Steel base is not included: use PK-1530

KIt

Tor q

Park Tool PRS-3(+OS) Repair Stand Base

• Steel base for (1-arm) PRS-3 and PRS-3OS repair stands • Painted slab-steel construction for non-tipping durability • 67 pound weight (consider freight costs when buying this item) part# PK-1530

ads

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s

Park Tool 1728-TA Thru-Axle Adapter

• Heavy-duty nylon storage/transport bag for PRS-15/PRS-20 stands • Includes shoulder strap. Black with white Park Tool logo

part# PK-1224 NEW

Park Tool Storage/Transport Bags part# PK-1507 PK-1508

Park Tool Super Lite Team Race Repair Stand

e Ha mm &P un ers che s

description repair stand base, (single) PRS-3(+OS)

Park Tool PRS-3(+OS) Repair Stand Base

Wh ee

lbu

ild

Wr enc

hes

price Park Tool Professional 1-Arm Repair Stand

phone 800.558.8324

1271

Tools

PARK TOOL

Repair Stands

Park Tool Deluxe Double Arm Repair Stand

s che Ben ools t &S

• A professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use • Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3”, fully adjustable clamping pressure, narrow 2.7” clamping jaws) • Clamps two bikes simultaneously • Clamps rotate 360 degrees horizontally and vertically • Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use • Clamping height easily adjusts from 50” to 62” (128cm to 158cm) using heavy duty lock block and locking pin system • Includes aluminum work tray

ke Bra ble a &C te & set l Cas whee e Fre

part# PK-1226 NEW

Park Tool Deluxe Double Arm Repair Stand

• A professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use • Includes two 100-3C Adjustable Linkage Clamps (clamps tubes up to 1-3/8”) • Clamps two bikes simultaneously • Clamps rotate 360 degrees horizontally and vertically • Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use • Clamping height easily adjusts from 50” to 62” (128cm to 158cm) using heavy duty lock block and locking pin system • Includes aluminum work tray

ain

& t nk e Cra Brack Btm e rak cB Dis s& File ers m a Re

part# PK-1213 NEW

k& For k c o Sh

price

Park Tool PRS-2/3(+OS) Repair Stand Floor Mount

ers mm Ha nches u &P et ads He

Park Tool Deluxe Double Arm Repair Stand

part# PK-1535

Park Tool PRS-2/3(+OS) Repair Stand Floor Mount s

ool lti T

Park Tool PRS-2(+OS) Repair Stand Base

a Ped

air Rep ds n Sta s ver dri ew r c S & Tap ading e Thr

PK-1248

& Tire e b u T s

KIt ue

ild

lbu

PK-1245

PK-1240

Park Tool Power Lift Shop Repair Stand

1272

description repair stand base, (double) PRS-2(+OS)

price

Park Tool Power Lift Shop Repair Stand

hes

price

• Steel base for (2-arm) PRS-2 and PRS-2OS repair stands • Painted slab-steel construction for non-tipping durability • 120 pound weight (consider freight costs when buying this item)

re asu

enc Wr

description repair stand floor mount, PRS-2/3(+OS)

Park Tool PRS-2(+OS) Repair Stand Base

s& ive Kn ing tt Cu etic gn Ma

q Tor

• Steel floor-mount plate for PRS-2/3 and PRS-2/3OS stands • Painted, 8”-square slab-steel construction for durability • Double (4-hole) drilled for stand-to-floor mounting part# PK-1529

ee Wh

description deluxe double arm repair stand, PRS-2.2-1

 Steel base is not included: use PK-1535 or PK-1529 for direct mount

m Fra

l Too

price

 Steel base is not included: use PK-1535 or PK-1529 for direct mount

Park Tool Deluxe Double Arm Repair Stand

description deluxe double arm repair stand, PRS-2.2-2

• Designed with professional mechanics in mind, the PRS-33 combines a massive upright, versatile clamping system and smooth operating electric motor to create a super rigid workstation that offers effortless height adjustment for any bike up to 120lbs (54 kg) • Perfect for lifting heavy electric, tandem, and downhill bikes off the ground, but also great for easy height changes during any repair or assembly • Clamping height adjusts from 6” to 78” (16-198cm) to allow a comfortable working position • 5” (127mm) diameter upright tube minimizes flex • Integrated work tray for tools and parts and integrated accessory bar for hanging wheels, hoses, etc. • Oversized gussets for superior stability when mounting stand to 135-33 base plate (sold separately) or directly to floor • Fully adjustable 100-3D micro adjust repair clamp grips any tube from 7/8 to 3” in diameter • Can be made into a double arm repair stand with the addition of the PRS-33 AOK add-on kit, which includes a second clamp, sliding carriage, work tray, electric motor, power source, chain and hardware • These items are drop-ship only direct from Park Tool. Contact BTI to order or for more information part# PK-1240 PK-1248 PK-1245

web www.bti-usa.com

description power lift shop repair stand, PRS-33 add on kit for PRS-33 power lift stand, PRS-33 AOK base plate for PRS-33 power lift stand, 135-33

price

Tools

PARK TOOL

Repair Stands

Park Tool Deluxe Bench-Mount Stand

• A professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use • Clamping height can be raised from 6.5” (16cm) to 16.25” (41cm) above the bench surface • Includes 100-3D Micro Adjust Clamp (clamps tubes up to 3”, fully adjustable clamping pressure, narrow 2.7” clamping jaws) • Clamp rotates 360 degrees • Heavy gauge steel tubing • Chrome plated for durability part# PK-1313 NEW

description deluxe bench-mount stand, PRS-4.2-2

price Park Tool Deluxe Bench-Mount Stand

Park Tool Deluxe Wall-Mount Stand

Br & C ake abl e Cas set Fre te & ew hee l

• Professional/shop quality, wall-mount repair stand • Elvax-covered jaw, cast aluminum, adjustable linkage clamp/head offers fully adjustable clamping pressure • Infinite 360-degree head rotation with tension-lever, cylindrical rotational locking system (fits up to 1-5/8”) • Powder coated steel, wall mount interface part# PK-1314

description deluxe wall-mount stand, PRS-4W

• A professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use • Clamping height can be raised from 6.5” (16 cm) to 16.25” (41cm) above the bench surface • Includes 100-3C Adjustable Linkage Clamp (clamps tubes up to 1-3/8”) • Clamp rotates 360 degrees • Heavy gauge steel tubing • Chrome plated for durability part# PK-1323 NEW

ain

price

Park Tool Deluxe Bench-Mount Stand

description bench mount repair stand, PRS-4.2-1

Ben c & S hes too ls

Park Tool Deluxe Wall-Mount Stand

C Btm rank Bra & cke t Dis cB rak e Fil Rea es & me rs For k Sho & ck Fra m

e Ha mm &P un ers che s

price

ads

Park Tool Micro-Adjust Repair Stand Clamps • • • • •

Cam-actuated adjustment system for quick entry, adjustment and exit Fully adjustable clamping pressure prevents damage to thin-walled tubes Grip nearly any tube from 7/8” to 3” (23-76mm), including aero tubes Narrow clamping jaws (2.7” / 7cm) fit into tight areas or on short seat posts Soft, durable composite rubber jaw covers

part# PK-1537

description micro-adjust repair stand clamp, 100-3D

price

Park Tool Deluxe Bench-Mount Stand

 Fits PRS-2, PRS-3, PRS-4, PRS-2 OS, PRS-3 OS, PRS-4 OS and PRS-4W PK-1538

micro-adjust repair stand clamp, 100-5D

 Fits PCS-1, PCS-4 and PRS-7 stands with composite top tubes PK-1539

Ped a

Park Tool Deluxe Clamp 100-3C

• Solid cylindrical mount-interface (no groove or taper) • Elvax-covered jaw, cast aluminum, adjustable linkage clamp/head offers fully adjustable clamping pressure • Fits: (June, 1996+) PRS-2(+OS), PRS-3(+OS), PRS-4(+OS), PRS-4W; and (pre June, 1996) PRS-5 repair stands description Deluxe clamp 100-3C, PRS-2/3/4, <96 PRS-5*

Rep Sta air nd s Scr ew dri ver s

 Fits PRS-25, PCS-10, PCS-11 and PCS-12

part# PK-1543

b Kn ive Cu s & ttin g Ma gn etic Me asu re Mu lti T ool s

PK-1539

micro-adjust repair stand clamp, 100-25D

Park Tool Micro-Adjust Repair Stand Clamps

Thr Tap & ead ing Tire & Tub e

price

Too l

KIt

Tor q

Wh ee

lbu

ild

Wr enc

hes

Park Tool Deluxe Clamp 100-3C

phone 800.558.8324

1273

Tools

PARK TOOL

Repair Stands

Park Tool Spring Clamp 100-1C

• Tapered mount-interface (no grooved/solid cylindrical) • Steel, spring loaded, quick adjusting clamp/head • Fits: (2002+) PCS-1, PCS-2 repair stands (newer, 02+ PCS-1/2 stands have a tip on the end of tapered head, will not fit older PCS-1/2 repair stands) • Also fits: PCS-4; and (June, 1996+) PRS-5, PRS6, PRS-7 if wanting a lesserquality/price clamp mechanism

Park Tool Spring Clamp 100-1C

s che Ben ools t &S

part# PK-1546

Park Tool 100-9C Adjustable Linkage Clamp

• The 100-9C fits PRS-6, PRS-7 and PRS-8 repair stands manufactured before 6/96 part# PK-1553

te & set l Cas whee e Fre

Park Tool 100-9C Adjustable Linkage Clamp

ain

& t nk e Cra Brack Btm e rak cB Dis

price

• Holds front end of bike stationary preventing wheel flop • Mounts to handle bar near stem and secures to top tube with Velcro strap (secures bike at all angles) • HBH-2 has been redesigned to fit 32mm handlebars and oversized top tubes up to 50mm description handlebar holder + Velcro strap, HBH-2

price

Park Tool Cast Aluminum 105 Tool Tray • Cast aluminum tool/work tray for Park work stands • Mounts around mast with included hardware • Fits all stands manufactured since June, 1996

k& For k c o Sh

Park Tool Handlebar Holder

m Fra

part# PK-1563

ers mm Ha nches u &P et ads He

part# PK-1561

s& ive Kn ing tt Cu etic gn Ma

description molded plastic 104 tool tray, (non-OS)

price

Park Tool Lock-Block & Handle Ball Knob

Park Tool Cast Aluminum 105 Tool Tray

u eas

ool lti T

a Ped

air Rep ds n Sta s ver dri ew r c S & Tap ading e Thr

• Complete Lock-Block rotational-tension assembly for PRS-2, PRS-3, and PRS-4 (+OS model) repair stands • Includes: (1) 113S threaded lock block, (1) 114S unthreaded lock block, (1) 115S block retraction spring, (1) 109S handle retention roll-pin, (1) 111S handle arm, and (1) 110S handle knob part# PK-1730

description lock-block PRS-2/3/4(+OS) assembly, #180

price

Park Tool Clamp Covers

• Replacement Park Tool repair stand clamp covers • Double cable reliefs (1 on each cover). Sold as set

Park Tool Molded Plastic 104 Tool Tray

& Tire e b u T

Park Tool Lock-Block & Handle Ball Knob s

KIt ue

part# PK-1540 PK-1748 PK-1749 PK-1750 PK-1751 PK-1752

ild

lbu

hes

enc Wr

PK-1748

PK-1749

PK-1750

PK-1751

PK-1752

PK-1540

Park Tool Clamp Covers

1274

price

• Molded plastic tool/work tray for Park work stands • Mounts around mast with bolt-on back plate and hardware • Fits all stands except: OS-model PRS-2/3/4, PRS-13, or pre-2002 PRS-5

q Tor

description cast aluminum 105 tool tray, (06/96+)

Park Tool Molded Plastic 104 Tool Tray

ee Wh

description adjustable linkage repair stand clamp, 100-9C

Park Tool Handlebar Holder

part# PK-1556

s& File ers m a Re

l Too

price

ke Bra ble a &C

description spring clamp 100-1C, (02+)* PCS-1/2

web www.bti-usa.com

description clamp covers (100-3D,5D,25D), 2-slot 1960 pr clamp covers (PCS-1/2), 2-slot 468G clamp covers (PRS-2-8), 2-slot 468B clamp covers (100-3/5X), 2-slot 1002 clamp covers (100-4/6/15X), 2-slot 1259 clamp covers (PCS-9), 2-slot 1185K

price