Content

Company Profile page 1 Content page 2 Model Number Index page 69 Impact Wrenches (with impact mechanism overview) page 3 - 11 Torque Wrenches page 11 Safety Gloves page 12 Ratchet Wrenches page 13 - 15 Drills page 16 - 17 Screwdrivers page 17 - 18 Hammers, Engraving Pen page 19 - 21 Needle Scalers page 22 Staplers and Nailers page 23 Sheet Metal Tools page 24 Saws page 25 Spot Weld Drills page 26 Riveters page 27 - 28 Auto Glass Removal Tools, Cutters, Blades page 29 - 30 Die Grinders, Tyre Buffers and Sticker Erasers page 31 - 33 RODCRAFT MBX - Remover System page 35 - 36 Pistol Sanders page 34, 38 Angle Sanders page 34, 38 - 40 Angle Grinders page 39 - 40 Belt Sanders page 37 Polishers page 41 Random Orbital Sanders Dust Extraction Stations page 42 Spot Repair Sanders page 43 Random Orbital Sanders page 43 - 47 Orbital Sanders, Block Sanders page 48 - 50 Dust Extraction Stations, Accessory page 47 - 48 Sand Blaster page 51 Paint Guns page 51 - 52 Cartridge Guns, Sachet (Sausage) Guns and Seam Sealing Guns page 53 Underbody Coating Guns and Cleaning Guns page 54 Blow Guns and Suction Guns (Pneumatic Vacuum Cleaner), Pocket Blow Pens page 54 - 55 Tyre Fillers, Certified and Digital page 55 Grease Guns page 56 Accessories page 57 - 68 Sockets, Extensions, Safety Retainer Rings/Pins page 57 Chisels and Other Hammer Accessories page 58 Staples, Brads and Nails (Strips, Coils) page 59 LED-Floodlight Inspection Lamp page 59 Saw Blades and Files page 60 Sanding Belts, Collets and Roloc Accessories page 61 Sanding Pads and Polishing Accessories page 62 - 63 Balancers and Hose Balancers page 64 Air Line Installation and Maintenance page 65 Maintenance Units, Filters, Water Separators, Regulators, Lubricators, Lubricants page 66 Couplings, Plugs and Fittings page 67 Hoses, Hose Reels and Exhaust Hose Silencer Kits page 68 Addresses page 70

Single Hammer "SH"

Long proven, inexpensive construction with one (two) hammer(s) and grease lubrication.

For all standard assembly work in :

• hardware and agro-mechanics • light industrial sector • automotive repair services • tyre services can be found in model: 2040, 2100, 2111, 2425/2426

Pin Clutch "PC"

Low vibration impact system with rapid torque increase and economic construction consisting of hardened, turned parts running in a closed impact cage. Lubricated with impact system oil model 1000S (oil bath lubrication).

For all quick assembly work in :

• tyre services • automotive repair services • hardware • light industrial sector • can be found in model: 2164, 2205, 2225, 2259, 2264, 2325, 2345, 2530, 3300 and their variants DUOPACT "DP"

Reliable system for continuous torque increase with two extremely robust, forged ring-hammers. Consisting of surprisingly few parts and having an extremely short design. Lubricated with grease - lubrication from outside partly possible with our Mini Grease Pump models 8150, 8160 without opening the housing.

For all extremely intense applications, like :

• industry • tyre services • automotive repair services • can be found in model: 2250, 2263/73, 2305, 2350, 2363/73, 2435/2436, 2450/2455, 2453/2463, 2485/2486, 2490/2491, 2585, 2590 (and their variants)

SmartDUOPACT "SmartDP"

New generation of the reliable DUOPACT system but building up torque much faster, this reduces assembly times and increases work efficiency. With integrated ball bearing and lubricated by grease.

For all fast and intense applications like :

• assembly • tyre services • automotive repair services • can be found in model: 2160Xi, 2260Xi, 2263Xi, 2363Xi, 2403Xi, 2433Xi, 2484Xi (and their variants) torque

SmartDUOPACT

DUOPACT

time

Jumbo "J"

Like DUOPACT but with one hammer only which is extra broad for impacting. Lubricated with grease - lubrication from outside partly possible with our Mini Grease Pump models 8150, 8160 without opening the housing.

For all extremely intense applications, like :

• industry • assemblies in servicing • can be found in model: 2125RE Closed Hammer System "CH"

This almost maintenance-free running mechanism is dedicated to break loose nuts and bolts without large effort due to its massive closed inertia. The construction is showing a very good weight / power ratio and has typically a short design. The closed construction means that once lubricated, the grease filling stays in place at the hammer for long period of time.

typical for :

• industry • truck and bus tyre services and assemblies • can be found in model: 2439/2449, 2444, 2469/2479

Impact Socket Set 3/8“

Set of 8 pieces impact resistant sockets in tool box, includes the sizes: 10 / 11 / 12 / 13 / 14 / 16 / 17 / 19 mm Article no. 8951011329 1/4“ square 53 Nm max.

Very short and handy 1/4“ impact wrench, easy to shift F/R with one hand. Regulation of the impacting power in both directions possible. 1 150 Nm max.

3/8“ impact wrench for small bolts. Regulation of the impacting power in both directions possible.

Variant Model Article no. impact wrench 1/4" 2040 8951077000 Model Article no. impact wrench 3/8" 2111 8951077020

150 Nm max.

1

3/8“ Impact Wrench for confined areas (motorcycles). Butterfly valve for F/R shifting with one hand. Integrated power regulation valve with 8 positions and 360° swivelling air inlet. . Model Article no. impact wrench 3/8" 2100 8951077010 3/8" with extra short and compact design with Exhaust hose / air supply hose system. Ideal for confined areas (e.g. small power motor)

170 Nm max. Jumbo

3

Model Article no. 2125RE impact wrench 3/8" 8951077290

390 Nm max. composite only 1.2 kg

4 395 Nm max SmartDUOPACT composite

4

Very handy 3/8“ impact wrench with high quality composite housing. 3 position torque reducer in forward. 2160Xi with Xtremely fast SmartDUOPACT mechanism and surprisingly low noise and low air consumption motor.

Variant Model Article no. Smart-DUOPACT 2160Xi 8951077310 Pin Clutch 2164 8951077040

Model Drive Torque Speed Weight Inner hose M Mmax diameter Dimension a x b x c Air Consumption

average – continuous Air inlet Impact system Noise Vibration

LpA

[inch] [Nm] [min-1] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²] 2040 1/4“ 37 53 12000 0.8 8 115x170x40 100 280 1/4“ FT DH 91 5 2100 3/8“ 105 150 10000 1.1 8 165x87x48 140 370 1/4“ FT SH 97.1 4.57 2111 3/8“ 105 150 10000 1.3 8 135x165x47 150 410 1/4“ FT SH 92.7 3.75 2125RE 3/8“ 122 175 10000 1.3 8 148x160x41 110 200 1/4“ FT J 96.3 6.19 2160Xi 3/8“ 340 395 11200 1.2 8 164x172x60 210 650 1/4“ FT SmartDP 91.6 7.72 2164 3/8“ 332 390 13000 1.2 8 169x172x49 200 600 1/4“ FT PC 95.3 5.59

450 Nm max SmartDUOPACT composite

4

390 Nm max. composite only 1.2 kg

4

Mini 1/2“ Impact Wrench with high power, but low weight and high quality Composite-Housing. With 3 position torque regulator (in forward). 2260Xi with Xtremely fast SmartDUOPACT mechanism and Xtra low consumption air motor.

Variant Model Article no. 2260XiSmart-DUOPACT 8951077390 Pin Clutch 2259 8951077090

600 Nm max. DUOPACT

2

580 Nm max.

short and long sockets and other 1/2“ accessories you will find on page 55

Favoured standard tool, easy to switch with one hand. With 4 position torque regulator (in for-ward).

Variant Model Article no. 2205REwith short anvil 8951077350 2205 8951077060 2208REwith long anvil 8951077102 Set (short anvil) 2209 8951177000

2

1/2“ square 640 Nm max.

Sets

Every here mentioned set includes: 1 impact wrench (with / without „RE“) 10 sockets 1/2“with sizes: 9/ 10/ 11/ 13/ 14/ 17/ 19/ 22/ 24/ 27 mm 1 extension bar 1/2“–75 mm 1 hex. key 1 tool box

Torque Wrenches, Certified

Complete program with 1/4“, 3/8“, 1/2", 3/4", 1“

please see page 11

Robust and very compact Universal Tool with forged DUOPACT impact mechanism. With 6 position torque regulator (in forward).

Variant Model Article no. 2250REwith short anvil 8951077380 2250 8951077080 2255REwith long anvil 8951077112 set (short anvil) 2251RE 8951177040 Strong all-round Tool, easy to switch with one hand. With 4 position torque regulator (in forward).

Variant Model Article no. 2225REwith short anvil 8951077360 2225 8951077070 2226REset (short anvil) 8951177030 set (short anvil) 2229 8951177010

Model Drive Torque Speed Weight Inner hose M Mmax diameter Dimension a x b x c

Air Consumption average – continuous Air inlet Impact system Noise Vibration LpA

[inch] [Nm] [min-1] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²]

2205RE 1/2" 406 580 7800 2.4 200x210x60 130 350 1/4“ FT PC8

87.4 6.71 2208RE 2.5 242x210x60 86.7 5.78 2225RE 1/2" 448 640 7300 2.6 8 195x215x57 110 310 1/4“ FT PC 90.7 6.24 2250RE 2.7 190x185x57 160 430 1/4“ FT DP8 89.6 6.22 2255RE 2.8 240x185x57 88.7 6.01 2260Xi 1/2“ 390 450 11200 1.2 8 166x172x60 210 650 1/4“ FT SmartDP 92 7.85 2259 1/2“ 336 390 13000 1.2 8 170x172x49 200 600 1/4“ FT PC 95.3 5.59 max. pressure 6.3 bar (90 psi FT: female thread norms applied : noise according to ISO15744 (KPA=KWA=1,7 dB), vibration 3-axis according to ISO28927-2, for LwA-values see page 69.

Power reduction

In order to prevent over-tightening of threaded connections this reduction serves to pre-tighten nuts and bolts carefully e.g. before using a torque wrench for final torquing. The power reducer and the forward / reverse shift are practically integrated in one knob, sunk into back of tool and made of metal well protected and sturdy against shocks. The F/R shift is large and easy to grab for professional use and is designed to deliver always full power in reverse. 1250 Nm max.

1/2" Composite Impact Wrenchfor universal use. Fast and high torque with forged DUOPACT mechanism Light weight – only 2.0 kg even at this high power level Robust forward-reverse shift/power regulator one knob only and always full power in reverse Air exhaust down motor housing Swivel air inlet With re-greasing plug for the impact mechanism

Model Article no. 2277 89510 00025

TL – Torque Limited

demo video on www.rodcraft.com

4 1050 Nm max. SmartDUOPACT 1.9 kg

The specialist: 2263TL – Torque Limited – with limited torque in forward (max. 90 Nm) for safe and fast pre-tightening before using a torque wrench for final and precise torquing (as officially requested for safety). Making tyre changing more efficient and much faster while maintaining maximum safety (900 Nm max. for disassembly). The Xtra Power Pack to break open. Your ultimate 1/2" tool with only 1,9 kg and smooth 82,0 dB(A).

Model Article no. with short anvil 2263Xi 8951077420

max. 90 Nm in forward Model Article no. max. 900 Nm in reverse 900 Nm 2263TL 8951077007

Model Drive Torque Speed Weight Inner hose M Mmax diameter Dimension a x b x c

Air Consumption average – continuous Air Inlet Impact system Noise Vibration

LpA

[inch] [Nm] [min-1] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²] 2263Xi 1/2“ 900 1050 8500 1.9 8 190x185x70 290 790 1/4“ IG SmartDP 93.7 9.05 2277 1/2" 900 1250 8200 2.0 8 194x186x70 245 700 1/4"IG DP 84.0 5.8

Model Drive Torque Speed Weight Inner hose M Mmax diameter Dimension a x b x c

Air Consumption average – continuous Air inlet Impact system Noise Vibration

LpA

700 Nm max. DUOPACT

1

Small 3/4“ Impact Wrench (Variant of 2250 with bigger motor) With 6 position torque regulator in forward.

Model Article no. 2305RE 8951077440

1700 Nm max. 4.8 kg

2

Well balanced lightweight Premium-Models with extra small front part allowing access to confined areas. Easy to control trigger for tightening with care. Double directional reduction of the impacting power possible by 2 position regulator.

Variant Model Article no. 1700 Nm max. 2345 8951077150 1500 Nm max. DUOPACT

Small 3/4“ Impact Wrench (Variant of 2250) With 6 position torque regulator in forward. 2

Impact Socket Set 3/4“

Set of 8 pieces impact resistant sockets in tool box, includes the sizes: 26 / 27 / 29 / 30 /32 / 35 / 36 / 38 mm 8951011331Article no.

Model Article no. 2315 8951077130

3

1800 Nm max. DUOPACT

Compressed air hoses

Only hoses with sufficiently large internal diameter provide enough compressed air for the pneumatic tool at the end of the line. Please see page 66

Very durable tools with powerful forged DUOPACT impact system. Equipped with ergonomic down-handle exhaust and a regulator for reduction of the impacting performance in forward operation (6 positions). Fast maintenance grease plug for servicing the impact system from outside.

Model Article no. 2350with short anvil 8951077160 with long anvil 2355 8951077012

4

1950 Nm max. SmartDUOPACT composite

Extremely powerful whilst lightweight and ideally suited to provide a fast service for small trucks and vans. With ergonomic down-handle exhaust that is also available with a silencing exhaust hose system. Including a fast maintenance grease plug for regreasing of the impact system from outside. The tool has an integrated forward/reverse shift/regulator on the back with 3 power positions. Model Article no. 2363Xiwith short anvil 8951077520

Model Drive Torque Speed Weight Inner hose M Mmax diameter Dimension a x b x c

Air consumption average – continuous Air inlet Impact system Noise Vibration

LpA

[inch] [Nm] [min-1] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²] 2305RE 3/4" 490 700 6300 2.9 13 210x195x57 185 510 1/4“ FT DP 91.5 8.22 2315 3/4" 1100 1500 5600 4.7 13 242x230x78 340 990 3/8“ FT DP 91.1 9.97 2325RE 3/4" 840 1200 4000 5.1 13 250x230x79 240 650 1/4" FT PC 90.6 6.96 2345 3/4" 1300 1700 6050 4.8 13 240x230x105 210 1000 3/8" FT PC 95.1 7.07 2350 5.9 240x230x105 3/4" 1400 1800 5000 13 290 780 3/8" FT DP 92.3 7.1

1950 Nm max. SmartDUOPACT composite

Fast and very light 1“composite impact wrench like model 2363Xi.

Model Article no. Compact 1 inch tool with extremely short design. Full power in reverse. In forward the impacting power can be reduced in 6 positions.

Model Article no.

2403Xi

8951077550 3

1800 Nm max. DUOPACT

2450

8951077220 2 2

2450 Nm max.

Group of tools with good price-power-ratio. Often favoured due to their well balanced construction and good performance. In-handle exhaust and power reducer with 3 positions for each forward and reverse.

Variant Model Article no 2425with short anvil 8951077190 with long anvil 2426 8951077032

3

2450 Nm max. 9.2 kg DUOPACT

Truck Tool with forged DUOPACT Impact System. Ergonomic weight allocation and steel front housing with grease nipple. The side handle can swivel by 360° to be set at any position. Air exhaust down the handle. Torque power adjustable in both directions with 3 positions.

Variant Model Article no. with short anvil 2435 8951077142 2450 Nm max. 9.2 kg / 10.4 kg DUOPACT

2

Famous basic tyre service tools for trucks and buses. Light weight and compact with forged Impact System. Steel front housing with grease nipple. The side handle can swivel by 360° to be set at any position. Forward / reverse shift with integrated 3 position power adjustment in forward.

Variant Model Article no. 2453with short anvil 8951077052 with long anvil 2463 8951077062

Model Drive Torque Speed Weight Inner hose M Mmax diameter Dimension a x b x c

Air Consumption average – continuous Air inlet Impact system Noise Vibration

LpA

[inch] [Nm] [min-1] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²] 2403Xi 1" 1560 1950 5750 3.6 13 228x215x93 270 1190 3/8" IG SmartDP 94.9 10.73

2425 1" 1715 2450 3200 9.4 13 312x270x119 370 1020 1/2" IG SH

97.9 14.93 2426 10.6 460x270x119 96 12.8 2435 1" 1715 2450 3200 9.2 13 310x270x135 370 1020 1/2" IG DP 98.9 12.99 2450 1" 1400 1800 4500 6 13 220x230x105 280 780 3/8" IG DP 98.7 8.82 2453 1" 1715 2450 3900

4

2600 Nm max. Closed Hammer System

Extremely robust Premium Tools especially recommended for trucks and buses. With almost maintenance-free "Closed Hammer System". The torque power can be adjusted in 3 positions in forward as well as in reverse.

Variant Model Article no. with short anvil 2439 8951077200 with long anvil 2449 8951077042 4

2600 Nm max. Closed Hammer System

Premium Heavy Duty Tools for use at forwarding companies and for servicing fleets of trucks and buses. Extremely robust due to almost maintenance-free "Closed Hammer System". The impacting power can be adjusted in 3 positions in forward as well as in reverse mode.

Variant Model Article no. with short anvil 2469 8951077072 with long anvil 2479 8951077230

252 mm

3

Universal power pack for truck and bus applications – the lightweight front part and the composite motor housing reduce the total weight to incredible 6.9 kg especially well suited for confined areas and over-head use. SmartDUOPACT mechanism building-up torque fast and efficiently due to internal ball bearing. The rubber coated auxiliary handle is designed for super grip and can be shifted in positions by tightening only one screw. Exhaust down the handle and ready-equipped to attach a silencing exhaust hose system (DUS26).

Variant Model Article no. with short anvil 2433Xi 8951077500 2500 Nm 6.9 kg SmartDUOPACT composite

One of the strongest 1" impact wrench in his lightweight class. The tool for the professional tyre service on trucks and buses. Easy to shift with one hand (F/R) and with integrated 3 position power adjustment for tightening (forward). In reverse it delivers automatically full power. Optimum time saver with low air consumption. Variant Model Article no. with short anvil 2483Xi 8951077510 with long anvil 2484Xi 8951077132 2800 Nm max. 7.2 / 8.4 kg SmartDUOPACT composite

All 1" impact wrenches on this page are equipped with a socket retainer for short term fixation of the accessory - practical for all applications where sokkets are often changed. 4 4

Model Drive Torque Speed Weight Inner hose M Mmax diameter Dimension a x b x c

Air Consumption average – continuous Air inlet Impact system Noise Vibration

LpA

[inch] [Nm] [min-1] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²] 2433Xi 1' 1800 2500 4000 6,9/7,1* 13 252x 260x108 410 1200 1/2'' FT Smart DP 97 12.76 2439 1" 1800 2600 5000 10.1 13 272x279x114 280 1047 1/2" FT CH 98.6 11.36 2449 11.5 442x279x114 98.5 10.29 2469 1" 1800 2600 5000 10.0 13 370x180x114 280 1047 1/2" FT CH 101 13.47 2479 11.4 525x180x114 101 12.42 2483Xi 1" 1900 2800 5000

1“ Sockets

Short and long, sets and single impact sockets see page 55

Socket Safety Retainer

Sockets and other accessory which - is not often changed - is used overhead - may not drop (e.g. from scaffolding), will be protected with this retainer against slipping-off accidentally. See page 55 Big 1" impact wrenches for heavy duty trucks and construction machines. Available with long or short anvil. The impacting power can be reduced in both directions in 4 steps.

„LIFTMASTER“ - 2910

For moving and positioning with ease - simple to use 8951011015 3

1“ up to 3500 Nm max. DUOPACT

Variant Model Article no. 2485 8951077240 2950 Nm max. with short anvil 2486 8951077082 with 200 mm long anvil 2490 89510772503500 Nm max. with short anvil with 200 mm long anvil 2491 8951077092

Extremely strong and durable pistol tool with "Closed Hammer System" for reduced maintenance. 4 postion torque regulation for both directions

Model Article no.

2444

8951077210 1“ 3500 Nm max. Closed Hammer System

4

3 3

suited for models: 2407 / 2408 / 2425 / 2426 2435 / 2436 / 2453 / 2463 2439 / 2449 * / 2469 / 2479 / 2485 / 2486 *

* can be mounted after small modifications 1 1/2“ up to 4000 Nm max. DUOPACT

Very strong tool for industrial and power plants as well as for threaded connections on track vehicles. Power regulation possible for both directions in 4 steps. Variant Model Article no. 2585 89510772703500 Nm max. 4000 Nm max. 2590 8951077280 1 1/2“ 5500 Nm max.

Bull Power Tool for extremely high torques in industrial plants like chemical and petrochemical plants as well as power plants. The impacting power can be adjusted in 4 steps for both directions.

Model Article no.

2530

8951077260

Model Drive Torque Speed Weight Inner hose M Mmax diameter Dimension a x b x c

Air Consumption average – continuous Air inlet Impact system Noise Vibration

LpA

[inch] [Nm] [min-1] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²] 2444 1" 2450 3500 2700 14.6 13 325x300x121 400 1120 3/8" IG CH 104 9.17 2485 1" 2065 2950 3300 13.0 19 410x230x100 330 930 1/2" IG DP 98.5 15.4 2486 15.2 600x230x100 101 16.82 2490 1" 2450 3500 3400 15.7 19 410x230x120 330 930 1/2" IG DP 98.2 14.57 2491 17.9 590x230x120 96.2 11.13 2585 1 1/2" 2450 3500 3400 16.6 19 460x235x120 330 930 1/2" FT DP 96.2 15.21 2590 1 1/2" 2800 4000 3000 17.4 19 468x240x141 330 930 1/2" FT DP 99.1 11.37 2530* 1 1/2" 4200 5500 3600 17.7 19 520x190x123 600 1800 1/2" FT PC 97.1 14.62 max. pressure 6.3 bar (90 psi) * please ask for stock / delivery time FT : female thread norms applied : noise according to ISO15744 (KPA=KWA=1,7 dB), vibration 3-axis according to ISO28927-2, for LwA-values see page 69. 10