EcoLab Flat Grill Cleaning Procedure - ReSet ReOpen ReAssure

Page 1

Flat Grill

SR Heat-Activated Grill & Toaster Cleaner Release Agent Grill Cleaning Pad Holder & Pad

Supplies required: Grill Cleaning Pad Holder Heat-Resistant Gloves Clean Cloth Pot Brush Jug

Press Toaster Cleaning

KAY QSR Heat-Activated Grill & Toaster Cleaner KAY Delimer ®

Supplies needed: Heat-Resistant Gloves Clean, Sanitiser-Soaked Cloth

White-handled Metal Spatula Paper Towels

®

END OF DAY CLOSE

THROUGHOUT THE DAY

Grill ClosingGrease Procedure WARNING: Follow Express

Fastequipment Foam manufacturers instructions for cleaning

tools required: KAY® Grill Cleaning Pad Holder KAY® Longlife Pot Brush Heat-Resistant Gloves

BEFORE CLEANING

Lime-A-Way

and ensure you cool down the equipment prior to cleaning or put the equipment into Clean Mode if required

1

Supplies needed: Grill Cleaning Pad Heat-Resistant Gloves Clean, Sanitiser-Soaked Cloth

1

• •

)

ml

(946

• Ensure control panel is always kept dry.

2

Scrape grill removing as much carbon and soil buildup BEFORE CLEANING as possible.

NOTE: Add another portion of solution to pad before scrubbing other side of top plate.

• Spray solution directly onto cleaning pad and never onto toaster.

qt

rill vé dG r acti ate ne pain tiv lea illeAc r C at- e et gr ores He Toast gril stad ur & y to nt poeur illas ya rr al to Net r la ch de pa lor or r ca pa piad po Lim tivado REN ILD ac

Contact Toaster Cleaning

• Use pad to scrub the top plate

• Attach grill cleaning pad to holder.

1 US

CH LY ck. NTS H OF E ON on ba ENFAT REAC L US aid DES T OF NA first ÉE EMEN verso. OU ITUTIO and S PORT SEUL au n KEEP INST autio LA EL soins o. NIÑO NN DE vers LOS FOR prec TIO iers RS al re E DE See R HO STITU prem xilios CANC ERVE AGE IN tion et L AL AL os au CONS US écau DE ON A CI imer POUR la pr FUER STITU los pr Voir GASEUSO IN ción y au NTEN RA MA PA prec SOLO se la an Vé

Grill & Toaster Cleaner

2 WARNING: Wear heat-resistant gloves to clean toaster

Throughout the day, scrape Wear PPE (Personal Protective Equipment) – •heat-resistant gloves debris into scrap drawer, using Turn grill off and disconnect electricity metal spatula as required. Scrape grill plate • Sanitise toaster handles every Empty grease trough and replace 3–4 hours using a clean NOTE: Grill should be at 175° C for optimal cleaning, allow approximately 10 minutes cooling time before cleaning sanitiser-soaked cloth from a bucket of Sanitiser Solution. • • • •

Grill Cleaning Pad and Holder

3

Spray solution onto the grill surface.

Without scrubbing use the KAY Grill Cleaning Pad Holder to evenly spread a coating of solution. Leave 6 5 Cover and remove any exposed products/raw ingredients from area. Cleaner on grill platen surface for 5 minutes to allow • Add a portion of Grill Cleaner • Using a clean cloth, wipe top breakdown • Repeat for bottom plate(s) • Turn toaster OFF. of soils. Turn grill to 120°C and allow to cool to this temperature (approximately 20 minutes). Leave 3

the4 grill

Solution to pad; scrub bottom plate.

toaster cover open.

WARNING: Applying Grill & Toaster Cleaner to the grill at a high smoke and trigger fire alarms.

toaster plate(s) to remove Grill Cleaner Solution. NOTE: Use a damp cloth only, as too much water will short temperature may cause circuit the toaster.

NOTE: Use a damp cloth only, as too much water will short circuit the toaster.

• Wash, rinse and sanitise scrap the grilland to spatula at sink. drawer

• Wipe outside of toaster with a clean cloth; close top toaster plate(s). • Wipe lid and guarding with a clean cloth; leave plates closed overnight.

• Rinse pad holder and pad at sink.

5

4 Scrub soil with a circular motion using the Grill Cleaning Pad Holder. Soils will liquefy. NOTE: Heavier soils may require more scrubbing or an additional application of solution

Wearing heat resistant gloves pour small amounts of hot water on grill while scrubbing with the pot brush. Continue this procedure until all soil is removed from the grill platen and grill remains wet.

Spray grease solution directly onto the toaster surface. Use the sprayer as a mist.

If required, empty and replace grease trough.

3

2

1

6

Use the Grill Cleaning Pad to distribute the product evenly over the top and bottom surface.

NOTE: This is estimated to be 6 sprays to the top and bottom of the toaster. 7

Allow product to sit for 2 minutes. SEPTEMBER 2017

8

Dilute delimer solution as per the label instructions and pour small amounts onto grill while brushing grill and backsplash with pot brush. NOTE: This will remove the oxidation on the grill surface.

9

In Australia: Medical Emergency call the Poisons Information Centre on 13 11 26. Technical information call 1300 300 441 or email aus.qsr@ecolab.com.

Rinse grill by pouring small amounts of lukewarm water on grill while brushing grill and backsplash with pot brush.

51992.01 TB AUS 51992/8001/1218 ©2018 Kay Chemical Company. All Rights Reserved

Scrape grill plate dry.

AFTER CLEANING: • Season grill plate with fresh oil • Empty, wash, rinse and replace grease trough

4

10

5

6

Wipe grill and backsplash with a clean, damp cloth.

Scrub the upper and lower platens with the Grill Cleaning Pad in a circular motion until soil liquefies.

Thoroughly rinse both upper and lower platens with clean, sanitiser-soaked cloths. Change rinse water as it becomes visibly soiled. Repeat until no residual cleaner remains. AUS NZ FIJI

1800 022 002 0508 732 733 3361 744

Empty drip tray into mop sink; then, wash, rinse, and replace. 42088-00 AUSNZ 42088/8000/0910 Use Glass & Multi-Surface ©2010 Kay Chemical Company. All Rights Reserved Cleaner and a clean, cloth to wipe sides and top of toaster.

©2020 Ecolab Pty Ltd. All rights reserved.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.