Our range of DIN Rail mounted terminals comprises of standard, double, triple and miniature terminals. In this section you will also find a range of accessories consisting of end stops, plates, partitions and insulation plates.
Standard feed through connector range & accessories
144.0 144.0 x 210.0mm x 210.0mm 12.0mm
Protective earth terminals & accessories
SRK range
380
Protective earth terminals: SL range
406
RK range
388
Protective earth terminals: SSL range
407
144.0 144.0 x 210.0mm x 210.0mm
Double-deck terminal blocks & accessories
6.0mm 6.0mm RKD range
Fuse disconnect terminals & accessories
391
RKDG range
393
SRKD range
394
SSLD range
400
Fuse disconnect terminals: STK2 and SSIK range
Triple-deck terminal blocks & accessories IK 2.5 – wire size 2.5mm2 IKD 2.5/Q – wire size 2.5mm
2
11.0mm
TRK 1.5 – wire size 2.5mm
411
Other accessories 403
Terminal markers: SB5 range
414
404
Terminal markers: SB6 range
414
DIN rail
415
DIN rail cutting tool
415
Knife disconnect terminals 2
409
Stud connection system HSKG range
378
DIN rail mounted terminals & accessories
DIN rail mounted terminals and accessories
6.0mm 6.0mm
6.0mm 6.0mm
Connect
CONNECT
405
379
Standard feed-through connector range
Standard feed-through connector range Cablecraft SRK 4/2A features two channel pluggable crossconnectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
SRK 2.5/2A – wire cross section 2.5mm
2
Cablecraft SRK 2.5/2A features two channel pluggable crossconnectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V0 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approved, RoHS 2 compliant
HF
en Haloge Fre
SCREW
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V0 DIN rail type Foot can be snapped onto TS 35 DIN rail Standards IEC, UL and CSA approved, RoHS 2 compliant
OTHER COLOURS AVAILABLE Part number
How to order Add the colour to the end of the part no.
144.0 x 210.0mm 144.0 x 210.0mm
OTHER COLOURS AVAILABLE Part number
RATED VOLTAGE/ MAX CURRENT IEC
SRK 2.5/2A (COLOUR)
1000/32
Conductor mm2/AWG
2.5/30-12
Pack quantity
RATED VOLTAGE/ MAX CURRENT
SRK 4/2A (COLOUR)
1000/41
ES 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
Conductor mm2/AWG
Pack quantity
4.0/26-10
1
144.0 x 210.0mm 144.0 x 210.0mm SES 35
ES 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
SES 35
How to order Add the colour to the end of the part no.
SRK 4/2A accessories
6.0mm 1
SRK 2.5/2A accessories
n
SCREW
IEC
SRK 2.5/2A
HF
e Haloge Fre
SRK 4/2A
6.0mm
DIN rail mounted terminals & accessories
SRK 4/2A – wire cross section 4mm2
Cablecraft feed-through terminal blocks use the easy to operate screw connection system. They have two connections and are suitable for top hat TS 35mm.
Part number
Standard colour
Pack quantity
End plate
AP 2.5-10
Beige
1
Partition plate
TW 2.5-10
Beige
1
Two pole insulated cross connector
SQI 4/2
Yellow
1
Part number
Standard colour
Pack quantity
Three pole insulated cross connector
SQI 4/3
Yellow
1
End plate
AP 2.5-10
Beige
1
Four pole insulated cross connector
SQI 4/4
Yellow
1
Partition plate
TW 2.5-10
Beige
1
Ten pole insulated cross connector
SQI 4/10
Yellow
1
Two pole insulated cross connector
SQI 2.5/2
Yellow
1
Thirty pole insulated cross connector
SQI 4/30
Yellow
1
Yellow
1
End stop – snap on
SES 35
Beige
1
Yellow
1
End stop – screw on
ES 35
Beige
1
Ten pole insulated cross connector
SQI 2.5/10
Yellow
1
Thirty pole insulated cross connector
SQI 2.5/30
Yellow
1
End stop – snap on End stop – screw on
380
SES 35
Beige
1
ES 35
Beige
1
26.0mm
SQI 2.5/3 SQI 2.5/4
26.0mm
Three pole insulated cross connector Four pole insulated cross connector
381
DIN rail mounted terminals & accessories
Standard feed-through connector range
CONNECT
6.0mm
6.0mm
CONNECT
CONNECT
6.0mm
Standard feed-through connector range
SRK 10/2A – wire cross section 10mm2
Cablecraft SRK 6/2A features two channel pluggable crossconnectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
Cablecraft SRK 10/2A features two channel pluggable crossconnectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V0 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approved, RoHS 2 compliant
HF
en Haloge Fre
SCREW
SRK 6/2A OTHER COLOURS AVAILABLE Part number
RATED VOLTAGE/ MAX CURRENT IEC
SRK 6/2A (COLOUR)
1000/57
How to order Add the colour to the end of the part no.
Conductor mm2/AWG
Pack quantity
6.0/22-8
1
6.0mm
DIN rail mounted terminals & accessories
SRK 6/2A – wire cross section 6mm2
SRK 6/2A accessories
SES 35
Material Polyamide 6.6 UL 94 - V0 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approved, RoHS 2 compliant
OTHER COLOURS AVAILABLE Part number
RATED VOLTAGE/ MAX CURRENT IEC
SRK 10/2A (COLOUR)
ES 35
Standard colour
Pack quantity
AP 2.5-10
Beige
1
Partition plate
TW 2.5-10
Beige
1
Two pole insulated cross connector
SQI 6/2
Yellow
1
Three pole insulated cross connector
SQI 6/3
Yellow
1
Four pole insulated cross connector
SQI 6/4
Yellow
1
Ten pole insulated cross connector
SQI 6/10
Yellow
1
Thirty pole insulated cross connector
SQI 6/30
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
12.0mm 382
26.0mm
Part number
End plate
SCREW
1000/76
How to order Add the colour to the end of the part no.
Conductor mm2/AWG
Pack quantity
10.0/18-6
1
144.0 x 210.0mm 144.0 x 210.0mm SES 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
HF
en Haloge Fre
SRK 10/2A
SRK 10/2A accessories
144.0 x 210.0mm 144.0 x 210.0mm
SPECIFICATIONS
ES 35
Other colours may be available on request – minimum order quantities apply.
6.0mm
Accessory type
Part number
Standard colour
Pack quantity
End plate
AP 2.5-10
Beige
1
Partition plate
TW 2.5-10
Beige
1
Two pole insulated cross connector
SQI 10/2
Yellow
1
Three pole insulated cross connector
SQI 10/3
Yellow
1
Four pole insulated cross connector
SQI 10/4
Yellow
1
Ten pole insulated cross connector
SQI 10/10
Yellow
1
Thirty pole insulated cross connector
SQI 10/30
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
383
DIN rail mounted terminals & accessories
Standard feed-through connector range
26.0mm
6.0mm
CONNECT
Standard feed-through connector range
SRK 16/2A – wire cross section 16mm2
CONNECT
6.0mm
6.0mm
CONNECT
Standard feed-through connector range
SRK 50/2A – wire cross section 50mm2
en Haloge Fre
SRK 16/2A OTHER COLOURS AVAILABLE Part number
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT IEC
SRK 16/2A (COLOUR)
1000/101
Conductor mm2/AWG
Pack quantity
16.0/16-4
1
SRK 16/2A accessories
SPECIFICATIONS The end plate is beige and the cross connectors are yellow as standard. Other colours are available on request – minimum order quantities apply.
Accessory type End plate
Part number
Pack quantity
SAP 16
1
SQI 16/2
1
Part number
Material Polyamide 6.6 UL 94 - V0 DIN rail type Foot can be snapped onto TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
SRK 35/2A – wire cross section 35mm2
6.0mm
SCREW
Cablecraft SRK 35/2A is suitable for wire size 35mm2 and features two channel pluggable cross-connectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
HF
en Haloge Fre
Material Polyamide 6.6 UL 94 - V0 DIN rail type Foot can be snapped onto TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
HF
en Haloge Fre
SCREW
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT IEC
SRK 50/2A (COLOUR)
1000/192
Conductor mm2/AWG
Pack quantity
50.0/8-0
1
SRK 50/2A accessories
144.0 x 210.0mm 144.0 x 210.0mm
Two pole insulated cross connector
SPECIFICATIONS
SRK 50/2A OTHER COLOURS AVAILABLE
6.0mm
DIN rail mounted terminals & accessories
HF
Cablecraft SRK 50/2A is suitable for wire size 50mm2 and features screw crossconnectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
DIN rail mounted terminals & accessories
SCREW
Cablecraft SRK 16/2A is suitable for wire size 16mm2 and features two channel pluggable cross-connectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
144.0 x 210.0mm 144.0 x 210.0mm Accessory type
Part number
Pack quantity
Two pole cross connector
SQ 50/2
1
Three pole cross connector
SQ 50/3
1
Four pole cross connector
SQ 50/4
1
SRK 35/2A OTHER COLOURS AVAILABLE Part number
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT IEC
SRK 35/2A (COLOUR)
1000/150
Conductor mm2/AWG
Pack quantity
35.0/16-1/0
1
SRK 35/2A accessories
SPECIFICATIONS The cross connectors are yellow as standard. Other colours are available on request – minimum order quantities apply.
Accessory type
Two pole insulated cross connector
384
Part number
Pack quantity
SQI 35/2
1
Material Polyamide 6.6 UL 4 - V0 DIN rail type Foot can be snapped onto TS 35 DIN rail Standards IEC approved, UL and CSA approval pending, RoHS 2 compliant
12.0mm 385
CONNECT
CONNECT
Standard feed-through connector range
Standard feed-through connector range 12
HF
en Haloge Fre
SCREW
OTHER COLOURS AVAILABLE Part number
How to order Add the colour to the end of the part number
RATED VOLTAGE/ MAX CURRENT
Conductor mm2/AWG
IEC
SRK 70/2A (COLOUR)
1000/232
70/6-000
OTHER COLOURS AVAILABLE Part number
Pack quantity
1
SRK 70/2A accessories
SCREW
How to order Add the colour to the end of the part number
IEC
SRK 120/2A (COLOUR)
1000/290
Conductor mm2/AWG
Pack quantity
120/4-0000
1
144.0 144.0 x 210.0mm x 210.0mm Pack quantity
Two pole cross connector
SQ 70/2
1
Three pole cross connector
SQ 70/3
1
Four pole cross connector
SQ 70/4
1
HOW THE SRK AND SSL SCREW CONNECTION SYSTEM WORKS a The Connection The clamping yolk transmits pressure from the screw to clamp the conductor against the busbar. The required contact force is generated by the torque applied to the screw.
b Safe to wire The screwconnection mechanism is easy to operate and can be used to establish a quick, safe connection using solid and flexible wires with or without cord end terminals.
c Pluggable cross-
connection options Distributing potentials with the pluggable SQI crossconnection system is quick and easy. Two cross-connection channels allow two voltages to be fed across when working with the standard terminals with rated cross-sections of 2.5mm2, 4mm2, 6mm2 and 10mm2.
Accessory type
ÍCX,rÎ ÍCX,rÎ ÍCX,rÎ ÍDX-vÎ ÍDX-vÎ ÍDX-vÎ
Part number
386
HF
en Haloge Fre
SRK 120/2A accessories
Accessory type
c
RATED VOLTAGE/ MAX CURRENT
144.0 144.0 x 210.0mm x 210.0mm
a
Material Polyamide 6.6 UL 94 - V0 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
SRK 120/2A
SRK 70/2A
b
SPECIFICATIONS
Part number
Pack quantity
Two pole cross connector
SQ 120/2
1
Three pole cross connector
SQ 120/3
1
Four pole cross connector
SQ 120/4
1
387
DIN rail mounted terminals & accessories
Material Polyamide 6.6 UL 94 - V0 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending. RoHS 2 compliant
SRK 120/2A – wire cross section 120mm2 Cablecraft SRK 120/2A is suitable for wire size 120mm2 and features screw cross-connectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
SPECIFICATIONS
6.0mm 6.0mm
DIN rail mounted terminals & accessories
Cablecraft SRK 70/2A is suitable for wire size 70mm2 and features screw cross-connectors and a more rigid construction on the rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
13
SRK 70/2A – wire cross section 70mm2
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V2 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approved, RoHS 2 compliant
HF
en Haloge Fre
SCREW
RK 95
Cablecraft RK 150 feed through terminal features a double-layer insulation housing. It is suitable for wire size 150mm2 and fits on to TS 35 rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V2 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approved, RoHS 2 compliant
HF
en Haloge Fre
SCREW
RK 150
OTHER COLOURS AVAILABLE Part number
How to order Add the colour to the end of the part number
RATED VOLTAGE/ MAX CURRENT IEC
RK 95 (COLOUR)
1000/232
OTHER COLOURS AVAILABLE
Conductor mm2/AWG
Pack quantity
95/ 4/0-2
1
RK 95 accessories SES 35
Part number
How to order Add the colour to the end of the part number
RATED VOLTAGE/ MAX CURRENT IEC
6.0mm
DIN rail mounted terminals & accessories
Cablecraft RK 95 feed through terminal features a double-layer insulation housing. It is suitable for wire size 95mm2 and fits on to TS 35 rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
RK 150 – wire cross section 150mm2
RK 150 (COLOUR)
1000/309
Conductor mm2/AWG
Pack quantity
150/ 300-2
1
RK 150 accessories
144.0 x 210.0mm 144.0 x 210.0mm ES 35
SES 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
Part number
Colour
Two pole insulated cross connector
AQI 2/95
Yellow
Three pole insulated cross connector
AQI 3/95
Yellow
Pack quantity
6.0mm 1
144.0 x 210.0mm 144.0 x 210.0mm ES 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
Part number
Colour
Pack quantity
Two pole insulated cross connector
AQI 2/150
Yellow
1
1
Three pole insulated cross connector
AQI 3/150
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – snap on
SES 35
Beige
1
End stop - screw on
ES 35
Beige
1
End stop - screw on
ES 35
Beige
1
ES 35 KST
Beige
1
End stop – screw on heavy duty
ES 35 KST
Beige
1
End stop – screw on heavy duty
THE RK RANGE
The clamping yoke
Cross connectors
The specialised construction of the clamping yoke minimises the contact resistance between the wire and the busbar. The clamp is tightened using a hex-socket screw which creates the required torque together with the clamping yoke.
The RK 50, RK 95 and RK 240 can be connected electrically to each other within the same rated cross section range using 2-pole or 3-pole external cross-connectors. The external crossconnectors are designed to match the rated current of the corresponding terminal block.
Pegs Pegs are located on the plastic housing of the terminal blocks – these lock to adjacent terminals to increase the mechanical stability.
388
12.0mm 389
DIN rail mounted terminals & accessories
Standard feed-through connector range
Standard feed-through connector range
RK 95 – wire cross section 95mm2
CONNECT
6.0mm
6.0mm
CONNECT
CONNECT
6.0mm
Standard feed-through connector range
Double-deck RKD terminals
Double-deck terminals - RKD range
Cablecraft RK 240 feed through terminal features a double-layer insulation housing. It is suitable for wire size 240mm2 and has a unique foot contact on both sides allowing the terminal to be snapped on to TS 35 rail. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
RKD 2.5/35 – wire cross section 2.5mm2
Material Polyamide 6.6 UL 94 - V2 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approved, RoHS 2 compliant
HF
en Haloge Fre
SCREW
RK 240 OTHER COLOURS AVAILABLE Part number
How to order Add the colour to the end of the part number
RATED VOLTAGE/ MAX CURRENT
Conductor mm2/AWG
IEC
RK 240 (COLOUR)
1000/380
240/ 500-2/0
Pack quantity
1
The RKD terminal blocks can be cross-connected at both levels. They have a width of 5mm and three levels with six connection points. They can handle solid or stranded wires up to 2.5mm2. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
OTHER COLOURS AVAILABLE
RK 240 accessories
RKD 2.5/35 (COLOUR)
ES 35
Other colours may be available on request – minimum order quantities apply.
Part number
Colour
Pack quantity
Two pole Insulated cross connector
AQI 2/240
Yellow
1
Three pole insulated cross connector
AQI 3/240
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
End stop – screw on heavy duty
ES 35 KST
Beige
26.0mm
Accessory type
390
DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, CSA approved, RoHS 2 compliant
1
HF
n
e Haloge Fre
SCREW
How to order Add the colour to the end of the part no.
RATED VOLTAGE/ MAX CURRENT IEC
144.0 x 210.0mm 144.0 x 210.0mm
12.0mm
Material Polyamide 6.6 UL 94 - V2
RKD 2.5/35
Part number
SES 35
SPECIFICATIONS
Conductor mm2/AWG
144.0 x 210.0mm 144.0 x 210.0mm 500/24
2.5/22-14
Pack quantity
1
RKD 2.5/35 accessories
6.0mm
SES 35
ES 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
End plate
Part number
Standard colour
Pack quantity
AP 4
Beige
1
Two pole cross connector
Q 2-5mm
-
1
Three pole cross connector
Q 3-5mm
-
1
Four pole cross connector
Q 4-5mm
-
1
Ten pole cross connector
Q 10-5mm
-
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
26.0mm
SPECIFICATIONS
6.0mm
DIN rail mounted terminals & accessories
RK 240 – wire cross section 240mm2
391
DIN rail mounted terminals & accessories
6.0mm
CONNECT
RKDG 4 – wire cross section 4mm2
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V2 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, CSA approved, RoHS 2 compliant
HF
en Haloge Fre
SCREW
The RKDG 4 terminal blocks have a width of 6mm. They have two levels with four connection points and can handle solid or stranded wire up to 4mm2. Their tightening screw is accessible even when wired. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour option see below.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V2 DIN rail type Foot can be snapped onto TS 35 DIN rail Standards IEC, CSA approved, RoHS 2 compliant
HF
n
e Haloge Fre
SCREW
RKDG 4
RKD 4/35 OTHER COLOURS AVAILABLE Part number
RATED VOLTAGE/ MAX CURRENT IEC
RKD 4/35 (COLOUR)
500/32
How to order Add the colour to the end of the part no.
Conductor mm2/AWG
Pack quantity
4/22-12
1
Part number
144.0 x 210.0mm 144.0 x 210.0mm
End plate Two pole cross connector
Standard colour
AP 4
Beige
Q 2-1.5
-
IEC
500/32
6.0mm Pack quantity
Conductor mm2/AWG
Pack quantity
4/22-12
1
144.0 x 210.0mm 144.0 x 210.0mm ES 35
Other colours may be available on request – minimum order quantities apply.
Other colours may be available on request – minimum order quantities apply.
Part number
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT
SES 35
ES 35
Accessory type
RKDG 4 (COLOUR)
RKDG 4 accessories
RKD 4/35 accessories
SES 35
OTHER COLOUR AVAILABLE
6.0mm
DIN rail mounted terminals & accessories
The RKD 4 terminal blocks have a width of 6mm and are available in a variety of designs. They have two levels with four connection points and can handle solid or stranded wire up to 4mm2. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
Double-deck RKDG terminals
Accessory type
Part number
Standard colour
Pack quantity
APG4
Beige
1
1
End plate
1
Two pole cross connector
Q 2 -1.5
-
1
Q 3 -1.5
-
1
-
1
Three pole cross connector
Q 3-1.5
-
1
Three pole cross connector
Four pole cross connector
Q 4-1.5
-
1
Four pole cross connector
Q 4-1.5
Ten pole cross connector
Q 10-1.5
-
1
Ten pole cross connector
Q 10-1.5
-
1
SES 35
Beige
1
ES 35
Beige
1
End stop – snap on
SES 35
Beige
1
End stop – snap on
End stop – screw on
ES 35
Beige
1
End stop – screw on
26.0mm
26.0mm
392
393
DIN rail mounted terminals & accessories
RKD 4/35 – wire cross section 4mm2
CONNECT
6.0mm
Double-deck RKD terminals
6.0mm
CONNECT
CONNECT
6.0mm 6.0mm
Double-deck SRKD terminals
Double-deck terminals - SRKD (2x2 connections)
Double-deck SRKD terminals
DIN rail mounted terminals & accessories
SRKD 2.5 – wire cross section 2.5mm2
SRKD 4 – wire cross section 4.0mm2
The SRKD feed-through terminal blocks are compatible with the same cross-connectors as the SRK range. The SRKD 2.5 is 5.1mm wide and has a maximum current capacity of 32(A). The operating temperature is -40°C to +120°C. Standard colour is beige, for colour option see below.
The SRKD feed-through terminal blocks are compatible with the same cross-connectors as the SRK range. The SRKD 4 is 6.1mm wide and has a maximum current capacity of 41(A). The operating temperature is -40°C to +120°C. Standard colour is beige, for colour option see below.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
HF
en Haloge Fre
SCREW
Part number
OTHER COLOUR AVAILABLE
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT IEC
1000/32
Conductor mm2/AWG
Pack quantity
2.5/30-12
1
144.0 144.0 x 210.0mm x 210.0mm
Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
HF
n
e Haloge Fre
SCREW
Part number
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT IEC
SRKD 4 (COLOUR)
1000/41
Conductor mm2/AWG
Pack quantity
4.0/26-10
1
144.0 144.0 x 210.0mm x 210.0mm
SRKD 4 accessories
SRKD 2.5 accessories
12.0mm
SPECIFICATIONS
SRKD 4
SRKD 2.5 OTHER COLOUR AVAILABLE
SRKD 2.5 (COLOUR)
SES 35
6.0mm 6.0mm
ES 35
SES 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
Part number
End plate
Standard colour
Pack quantity
ES ES35 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
Part number
Standard colour
Pack quantity
SAPD 2.5-4
Beige
1
End plate
SAPD 2.5-4
Beige
1
Two pole insulated cross connector
SQI 2.5/2
Yellow
1
Two pole insulated cross connector
SQI 4/2
Yellow
1
Three pole insulated cross connector
SQI 2.5/3
Yellow
1
Three pole insulated cross connector
SQI 4/3
Yellow
1
Four pole insulated cross connector
SQI 2.5/4
Yellow
1
Four pole insulated cross connector
SQI 4/4
Yellow
1
Ten pole insulated cross connector
SQI 2.5/10
Yellow
1
Ten pole insulated cross connector
SQI 4/10
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
End stop – screw on
ES 35
Beige
1
11.0mm
394
DIN rail mounted terminals & accessories
6.0mm 6.0mm
CONNECT
395
Double-deck SRKD terminals
SRKD 2.5/SV – wire cross section 2.5mm2
SPECIFICATIONS Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
HF
en Haloge Fre
SCREW
SRKD 10 OTHER COLOUR AVAILABLE Part number
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT
12.0mm
IEC
SRKD 10 (COLOUR)
1000/76
Conductor mm2/AWG
Pack quantity
10.0/18-6
1
The SRKD feed-through terminal blocks are compatible with the same cross-connectors as the SRK range. The SRKD 2.5 is 5.1mm wide and has a maximum current capacity of 32(A). The operating temperature is -40°C to +120°C. Standard colour is beige, for colour option see below.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
OTHER COLOUR AVAILABLE Part number
SRKD 2.5/SV (COLOUR)
144.0 x 210.0mm 144.0 x 210.0mm SES 35
ES ES35 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
n
SCREW
SRKD 2.5/SV
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT IEC
SRKD 10 accessories
HF
e Haloge Fre
1000/32
Conductor mm2/AWG
Pack quantity
2.5/30-12
1
144.0 x 210.0mm 144.0 x 210.0mm
SRKD 2.5/SV accessories
6.0mm
SES 35
12.0mm
ES 35
Part number
Standard colour
Pack quantity
End plate
SAPD 10
Beige
1
Two pole insulated cross connector
SQI 10/2
Yellow
1
Accessory type
Part number
Standard colour
Pack quantity
Three pole insulated cross connector
SQI 10/3
Yellow
1
End plate
SAPD 2.5-4
Beige
1
Four pole insulated cross connector
SQI 10/4
Yellow
1
Two pole insulated cross connector
SQI 2.5/2
Yellow
1
Ten pole insulated cross connector
SQI 10/10
Yellow
1
Three pole insulated cross connector
SQI 2.5/3
Yellow
1
End stop – snap on
SES 35
Beige
1
Four pole insulated cross connector
SQI 2.5/4
Yellow
1
End stop – screw on
ES 35
Beige
1
Ten pole insulated cross connector
Other colours may be available on request – minimum order quantities apply.
SQI 2.5/10
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
26.0mm
26.0mm
396
DIN rail mounted terminals & accessories
Double-deck terminals - SRKD (4 connections)
11.0mm
DIN rail mounted terminals & accessories
The SRKD feed-through terminal blocks are compatible with the same cross-connectors as the SRK range. The SRKD 10 is 10.1mm wide and has a maximum current capacity of 76(A). The operating temperature is -40°C to +120°C. Standard colour is beige, for colour option see below.
CONNECT
6.0mm
SRKD 10 – wire cross section 10.0mm2
6.0mm
Double-deck SRKD terminals
6.0mm
CONNECT
397
CONNECT
6.0mm
Double-deck SRKD terminals
Double-deck SRKD terminals
SRKD 10/SV – wire cross section 10.0mm2
The SRKD feed-through terminal blocks are compatible with the same cross-connectors as the SRK range. The SRKD 4 is 6.1mm wide and has a maximum current capacity of 41(A). The operating temperature is -40°C to +120°C. Standard colour is beige, for colour option see below.
The SRKD feed-through terminal blocks are compatible with the same cross-connectors as the SRK range. The SRKD 10 is 10.1mm wide and has a maximum current capacity of 76(A). The operating temperature is -40°C to +120°C. Standard colour is beige, for colour option see below.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
HF
en Haloge Fre
SCREW
Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped onto TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
HF
n
e Haloge Fre
SCREW
SRKD 10/SV
SRKD 4/SV
OTHER COLOUR AVAILABLE
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT IEC
SRKD 4/SV (COLOUR)
1000/41
6.0mm
OTHER COLOUR AVAILABLE Part number
SPECIFICATIONS
Conductor mm2/AWG
Pack quantity
4.0/26-10
1
12.0mm
How to order Add the colour to the end of the part number.
RATED VOLTAGE/ MAX CURRENT IEC
SRKD 10 (COLOUR)
1000/76
Conductor mm2/AWG
Pack quantity
10.0/18-6
1
SRKD 10/SV accessories
144.0 x 210.0mm 144.0 x 210.0mm SRKD 4/SV accessories SES 35
Part number
12.0mm
144.0 x 210.0mm 144.0 x 210.0mm SES 35
Other colours may be available on request – minimum order quantities apply.
ES ES35 35
Other colours may be available on request – minimum order quantities apply.
ES ES35 35
6.0mm
Accessory type
Part number
Standard colour
Pack quantity
Accessory type
Part number
Standard colour
Pack quantity
End plate
SAPD 10
Beige
1
End plate
SAPD 2.5-4
Beige
1
Two pole insulated cross connector
SQI 10/2
Yellow
1
Two pole insulated cross connector
SQI 4/2
Yellow
1
Three pole insulated cross connector
SQI 10/3
Yellow
1
Three pole insulated cross connector
SQI 4/3
Yellow
1
Four pole insulated cross connector
SQI 10/4
Yellow
1
Four pole insulated cross connector
SQI 4/4
Yellow
1
Ten pole insulated cross connector
SQI 10/10
Yellow
1
Ten pole insulated cross connector
SQI 4/10
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
End stop – screw on
ES 35
Beige
1
SRK AND SSL TERMINAL TYPE HOUSING INSULATION MATERIAL
398
26.0mm
Specification • Polyamide PA6.6 UL 94, flammability class V0, self extinguishing without burning drops. • Free of hazardous material such as halogen or phosphor • Creepage resistance: CTI 600 • Operating temperature from -40 °C to +120 °C
26.0mm
DIN rail mounted terminals & accessories
SRKD 4/SV – wire cross section 4.0mm2
DIN rail mounted terminals & accessories
6.0mm
CONNECT
12.0mm 399
Double-deck SSLD terminals
SSLD 4/SV – wire cross section 4.0mm2
SSLD 2.5/SV – wire cross section 2.5mm2
The SSLD feed-through terminal blocks are configured with a PE foot for contact on both sides allowing the terminal to be snapped on to TS 35 rails without the use of screws. The SSLD 4/SV is 5.1mm wide and has a maximum current capacity of 32(A). The operating temperature is -40°C to +120°C.
The SSLD feed-through terminal blocks are configured with a PE foot for contact on both sides allowing the terminal to be snapped on to TS 35 rails without the use of screws. The SSLD 2.5 is 5.1mm wide and has a maximum current capacity of 32(A). The operating temperature is -40°C to +120°C.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
HF
en Haloge Fre
SCREW
Part number
Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped onto TS 35 DIN rail
12.0mm
Part number
Colour
RATED VOLTAGE/ MAX CURRENT IEC
GREEN/YELLOW
1000/32
Conductor mm2/AWG
Pack quantity
2.5/30-12
1
SSLD 4/SV (COLOUR)
144.0 x 210.0mm 144.0 x 210.0mm ES 35
End plate
SCREW
Colour
RATED VOLTAGE/ MAX CURRENT
GREEN/YELLOW
1000/41
Conductor mm2/AWG
Pack quantity
4.0/26-10
1
144.0 x 210.0mm 144.0 x 210.0mm SES 35
ES ES35 35
Other colours may be available on request – minimum order quantities apply.
6.0mm
Other colours may be available on request – minimum order quantities apply.
Accessory type
n
e Haloge Fre
SSLD 4/SV accessories
SSLD 2.5/SV accessories
SES 35
HF
Standards IEC, UL and CSA approval pending, RoHS 2 compliant
IEC
SSLD 2.5/SV
SSLD 2.5/SV
SPECIFICATIONS
SSLD 4/SV
6.0mm
DIN rail mounted terminals & accessories
Double-deck terminals - SSLD (4 connections)
DIN rail mounted terminals & accessories
Double-deck SSLD terminals
CONNECT
6.0mm
6.0mm
CONNECT
Accessory type
Part number
Standard colour
Pack quantity
End plate
SAPD 2.5-4
Beige
1
Two pole insulated cross connector
SQI 4/2
Yellow
1
12.0mm
Part number
Standard colour
Pack quantity
SAPD 2.5-4
Beige
1
Three pole insulated cross connector
SQI 4/3
Yellow
1
SQI 4/4
Yellow
1
SQI 4/10
Yellow
1
Two pole insulated cross connector
SQI 2.5/2
Yellow
1
Four pole insulated cross connector
Three pole insulated cross connector
SQI 2.5/3
Yellow
1
Ten pole insulated cross connector
Four pole insulated cross connector
SQI 2.5/4
Yellow
1
End stop – snap on
SES 35
Beige
1
Ten pole insulated cross connector
SQI 2.5/10
Yellow
1
End stop – screw on
ES 35
Beige
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
11.0mm
12.0mm 400
401
CONNECT
CONNECT
Triple-deck terminals
Triple-deck initiator terminals
The SSLD feed-through terminal blocks are configured with 2x2 connections. The SSLD 10 is 10.1mm wide. The operating temperature is -40°C to +120°C.
IK 2.5 – wire cross section 2.5mm2
SPECIFICATIONS Material Polyamide 6.6 UL 94 - VO DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC, UL and CSA approval pending, RoHS 2 compliant
HF
en Haloge Fre
SCREW
SSLD 10/SV
SSLD 10/SV (COLOUR)
Colour
Conductor mm2/AWG
GREEN/YELLOW
10.0/18-6
Pack quantity
6.0mm 6.0mm
Part number
1
The IK 2.5 is a 5mm thin initiator terminal with a screw connection that combines all of the connections found in an initiator into a single terminal. Use in combination with the IKD 2.5 power supply terminal. The operating temperature is -40°C to +120°C.
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V2 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC and CSA approved, RoHS 2 compliant
HF
en Haloge Fre
SCREW
IK 2.5 Part number
Colour
RATED VOLTAGE/ MAX CURRENT
Conductor mm2/AWG
IEC
IK 2.5
BEIGE
250/24
Pack quantity
12.0mm 12.0mm
2.5/22-14
1
SSLD 10/SV accessories
144.0 144.0 x 210.0mm x 210.0mm SES 35
ES ES35 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
Part number
Standard colour
Pack quantity
End plate
SAPD 10
Beige
1
Two pole insulated cross connector
SQI 10/2
Yellow
1
Three pole insulated cross connector
SQI 10/3
Yellow
1
Four pole insulated cross connector
SQI 10/4
Yellow
1
Ten pole insulated cross connector
SQI 10/10
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
402
144.0 144.0 x 210.0mm x 210.0mm
IK 2.5 accessories
End plate may be available in other colours on request – minimum order quantities apply.
Accessory type
Part number
Standard colour
Pack quantity
AP 2.5/ID
Beige
1
Two pole cross connector
Q 2-IKD
-
1
Three pole cross connector
Q 3-IKD
-
1
Four pole cross connector
Q 4-IKD
-
1
Ten pole cross connector
Q 10-IKD
-
1
End plate
11.0mm 11.0mm
DIN rail mounted terminals & accessories
SSLD 10/SV – wire cross section 10.0mm2
DIN rail mounted terminals & accessories
Double-deck SSLD terminals
403
Knife disconnect terminals
Knife disconnect terminals
Material Polyamide 6.6 UL 94 - V2
SPECIFICATIONS
DIN rail type Foot can be snapped on to TS 35 DIN rail
Material Polyamide 6.6 UL 94 - V2 DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC and CSA approved,
Standards IEC, UL and CSA approved, RoHS 2 compliant
HF
en Haloge Fre
SCREW
RoHS 2 compliant
SPECIFICATIONS
HF
IKD 2.5/Q Part number
IKD 2.5/Q
Colour
BEIGE
RATED VOLTAGE/ MAX CURRENT IEC
250/24
Conductor mm2/AWG
Pack quantity
2.5/22-14
1
12.0mm
144.0 x 210.0mm 144.0 x 210.0mm
End plate may be available in other colours on request – minimum order quantities apply.
Part number
Standard colour
AP 2.5/ID
Beige
Two pole cross connector
Q 2-IKD
-
Three pole cross connector
Q 3-IKD
-
1
Four pole cross connector
Q 4-IKD
-
1
End plate
Ten pole cross connector
SCREW
TRK 1.5 – wire cross section 2.5mm2
IKD 2.5/Q accessories
Accessory type
en Haloge Fre
6.0mm
DIN rail mounted terminals & accessories
The IKD 2.5/Q base terminal can be positioned anywhere on the terminal strip combination. Crossconnection is possible on open and closed sides of the terminal. The operating temperature is -40°C to +120°C.
CONNECT
DIN rail mounted terminals & accessories
IKD 2.5/Q – wire cross section 2.5mm2
6.0mm
Triple-deck terminals
6.0mm
CONNECT
Q 10-IKD
-
Pack quantity
1
6.0mm 1
The TRK 1.5 features a sturdy, closed housing; the established disconnect-blade with high quality surfaces; minimal and stable level of contact resistance and touchsafe protection also during the disconnect process. The operating temperature is -40°C to +120°C. Standard colour is beige, for colour options see below.
144.0 x 210.0mm 144.0 x 210.0mm
12.0mm
TRK 1.5 terminals OTHER COLOURS AVAILABLE Part number
How to order Add the colour to the end of the part number
RATED VOLTAGE/ MAX CURRENT IEC
1
TRK 1.5 (COLOUR)
400/10
Conductor mm2/AWG
Pack quantity
2.5/22-12
1
TRK 1.5 accessories SES 35
ES 35
Other colours may be available on request – minimum order quantities apply.
Accessory type
404
11.0mm
12.0mm
Part number
Standard colour
Pack quantity
Two pole external insulated cross connector
AQI2/6/17
Yellow
1
Three pole external insulated cross connector
AQI3/6/17
Yellow
1
Four pole external insulated cross connector
AQI4/6/17
Yellow
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
405
Protective earth terminals: SSL range
Cablecraft offers two types of protective earth terminals – the SL and the SSL ranges. Both are based on a screw connection system to give a good electrical connection.
The SSL range uses a screw connection system for solid and flexible wires, with or without cord end terminals. The protective-earth terminals feature a PE foot contact that is snapped on without screws, ensuring mechanical and electrical safety. The operating temperature is -40°C to +120°C.
HF
Material Polyamide 6.6 UL 94 - V2
SCREW
en Haloge Fre
DIN rail type Foot can be snapped on to TS 35 DIN rail Standards IEC and UL approved, RoHS 2 compliant
HF
SPECIFICATIONS Material Polyamide 6.6 UL 94 - V0
en Haloge Fre
SCREW
DIN rail type Foot can be snapped onto TS 35 DIN rail Standards * IEC, UL and CSA approved ** IEC, UL and CSA approval pending, RoHS 2 compliant
SSL range terminals
6.0mm
Protective earth terminals: SL range The SL range features the proven screw-connection system and a metal clamping foot to secure to the DIN rail, to establish a quick, safe connection for the smallest cross sections. The operating temperature is -40°C to +120°C.
Colour
SSL 2.5/2A
SSL 4/2A SSL 6/2A
144.0 x 210.0mm 144.0 x 210.0mm
12.0mm
Part number
SSL10/2A SSL16/2A
SL 2.5/35
SL 4/35
SL 10/35
Conductor mm2/ AWG
Pack quantity
GREEN/YELLOW
2.5/22-12
1
GREEN/YELLOW
4.0/22-11
1
GREEN/YELLOW
6.0/22-8
1
GREEN/YELLOW
10.0/10-6
1
SNAP ON TO RAIL TS 35
144.0 x 210.0mm 144.0 x 210.0mm
GREEN/YELLOW
16.0/16-4
1
6.0mm SSL 50/2A
GREEN/YELLOW
35.0/16-1/0
1
GREEN/YELLOW
50.0/8-0
1
SSL 70/2A
GREEN/YELLOW
70.0/6-000
1
SSL 35/2A
12.0mm LARGE WIRE ENTRY BAY
See overleaf for accessories
SL 16/35 N
SL 35/35 N
SL range terminals Colour
Conductor mm2/AWG
Pack quantity
SL 2.5/35
GREEN/YELLOW
2.5/22-12
1
GREEN/YELLOW
4.0/22-11
1
GREEN/YELLOW
10.0/20-6
1
GREEN/YELLOW
16.0/10-4
1
GREEN/YELLOW
35.0/12-2
1
SL 4/35 SL 10/35
SL 16/35 N SL 35/35 N
406
SSL 2.5/2A*
SSL 16/2A**
SSL 4/2A*
SSL 35/2A**
SSL 6/2A*
26.0mm
Part number
26.0mm
DIN rail mounted terminals & accessories
Protective earth terminals
Protective earth terminals
DIN rail mounted terminals & accessories
Protective earth terminals
SPECIFICATIONS
CONNECT
6.0mm
6.0mm
CONNECT
SSL 50/2A**
SSL 10/2A*
12.0mm SSL 70/2A**
407
SSL accessories (SSL 2.5/2A to SSL10/2A) Accessory type
Fuse disconnect terminals
Fuse disconnect terminals Pack quantity
AP 2.5-10-GREEN
50
TW 2.5-10
50
End stop - snap on
SES 35
50
End stop - screw on
ES 35
50
End plate Partition plate
STK 2 wire cross section 4mm2 Universal foot, fits symmetrical (top hat) and G rail. Takes 20mm fuse up to 6.3A. Lever lifts to isolate and remove fuse. The operating temperature is -40°C to +120°C.
SSL 2.5/2A Two pole insulated cross connector
SQI 2.5/2
50
Three pole insulated cross connector
SQI 2.5/3
50
Four pole insulated cross connector
SQI 2.5/4
20
Ten pole insulated cross connector
SQI 2.5/10
10
Two pole insulated cross connector
SQI 4/2
50
Three pole insulated cross connector
SQI 4/3
50
Four pole insulated cross connector
SQI 4/4
20
Ten pole insulated cross connector
SQI 4/10
10
Two pole insulated cross connector
SQI 6/2
50
Three pole insulated cross connector
SQI 6/3
50
Four pole insulated cross connector
SQI 6/4
20
Ten pole insulated cross connector
SQI 6/10
10
Two pole insulated cross connector
SQI 10/2
50
Three pole insulated cross connector
SQI 10/3
50
Four pole insulated cross connector
SQI 10/4
20
Ten pole insulated cross connector
SQI 10/10
10
12.0mm SSL 6/2A
n
SCREW
SPECIFICATIONS END STOP SES 35
SSL 4/2A
HF
e Haloge Fre
Material Polyamide 6.6 UL 94 - V2 DIN rail type Foot can be snapped on to TS 35 DIN rail and G rail
6.0mm
END STOP ES 35
144.0 x 210.0mm 144.0 x 210.0mm
Standards IEC, UL and CSA approved, RoHS 2 compliant
144.0 x 210.0mm 144.0 x 210.0mm
Fuse disconnect terminals
6.0mm
Part number
Colours available
STK 2 (COLOUR)
BEIGE
BLUE
IEC
Conductor mm2/ AWG
500/6.3
4.0/22-12
12.0mm Pack quantity
1
SSL 10/2A
Accessory for fuse disconnect terminals
End plate may be available in other colours on request – minimum order quantities apply.
Accessory type
End plates
Part number
Standard colour
Pack quantity
AP/SI-2
Beige
1
SSL accessories (SSL 16/2A to SSL35/2A) Accessory type
Part number
Pack qty
SAP 16/2A-GREEN
20
SQI 16/2
20
SQI 35/2
20
SSL 16/2A End plate
Two pole insulated cross connector
408
26.0mm
SSL 35/2A
26.0mm
Two pole insulated cross connector
11.0mm
DIN rail mounted terminals & accessories
Part number
DIN rail mounted terminals & accessories
Protective earth terminals
CONNECT
6.0mm
6.0mm
CONNECT
409
CONNECT
6.0mm 6.0mm
Fuse disconnect terminals
HSKG stud connection system
DIN rail mounted terminals & accessories
SSIK 4 and SSIK 6 wire cross section 4-6mm2
HSKG stud connection system
The SSIK fuse-disconnect terminals are compatible with the same crossconnectors as the SRK range. They are made from glass-fibre re-inforced polyamide. With good dimensional stability up to high temperatures, they enable new applications in electrical engineering. The operating temperature is -40°C to +140°C.
Cablecraft HSKG stud connection system offers secure connections for all energy transmitting applications. Depending on the wire cross-section, the stud terminals can be used with M6, M8, M10, M12 and M16 threaded studs. When used with the ADH hinged covers, outstanding touch protection is achieved.
HT
HF
High ure at temper
en Haloge Fre
SCREW
SPECIFICATIONS Material Glass-fibre reinforced polyamide 6.6 UL 94 - V0
SSIK 6/2A
DIN rail type Foot can be snapped on to TS 35 DIN rail
HF
n
SPECIFICATIONS Material
Standards IEC, UL and CSA approval pending, RoHS 2 compliant Fuse sizes SSIK 4/2A compatible with 5x20/5x25/5x30 SSIK 6/2A compatible with 6.3x25/6.3x32
Polyamide 6.6 UL 94 - V0
DIN rail type Foot can be snapped on to TS 35 DIN rail
SSIK 4/2A
Temperature range -40°C to +105°C
Standards EN 60947-7-1, EN 50124-1, DIN EN 61373. IEC, UL and CSA approved,
Fuse disconnect terminals Part number
Colours available
SSIK 4/2A
BLACK
IEC
Conductor mm2/ AWG
Pack quantity
500/10
4.0/22-11
1
144.0 144.0 x 210.0mm x 210.0mm
SSIK 6/2A
BLACK
e Haloge Fre
STUD
500/10
6.0/13-4
1
RoHS 2 compliant
HSKG 35/M6/B/B wire cross section 35mm2
144.0 144.0 x 210.0mm x 210.0mm
HSKG 35/M6/B/B high-power stud terminal is suitable for wire size 35mm2. The cable terminal, when placed on the stud and tightened, forms a secure contact with another terminal or busbar.
Accessories for SSIK 4/2A
12.0mm
6.0mm 6.0mm
HSKG 35/M6/B/B
Other colours may be available on request – minimum order quantities apply.
Accessory type
Part number
End plates
Standard colour
Pack quantity
SAP-SSIK
Black
1
Two pole insulated cross connector
SQI 4/2
Yellow
1
Three pole insulated cross connector
SQI 4/3
Yellow
1
Four pole insulated cross connector
SQI 4/4
Yellow
1
Part number
Colour
RATED VOLTAGE/ MAX CURRENT IEC
HSKG 35/M6/B/B (COLOUR)
1000/125
BEIGE
Conductor mm2/AWG
Pack quantity
35/14-2
1
HSKG 35/M6/B/B accessories SES 35
ES 35
Accessories for SSIK 6/2A Accessory type
Cover profile ADH-35
Other colours may be available on request – minimum order quantities apply.
Accessory type
11.0mm
End plates
Part number
SAP-SSIK
Standard colour
Black
Pack quantity
1
1
QS 2/35/6
-
QS 3/35/6
-
1
SES 35
Beige
1
End stop – snap on
1
Three pole insulated cross connector
SQI 6/3
Yellow
1
End stop – screw on
1
End stop – screw on heavy duty
410
BLUE
QS cross-connection rail
Yellow Yellow
YELLOW
Pack quantity
QS cross-connection rail
SQI 6/2 SQI 6/4
ADH 35 (COLOUR)
Colours available
1
Two pole insulated cross connector Four pole insulated cross connector
Part number
ES 35
Beige
1
ES35 KST
Beige
1
411
DIN rail mounted terminals & accessories
6.0mm 6.0mm
CONNECT
HSKG stud connection system
HSKG 185/M12/B/B wire cross section 185mm2
HSKG 70/M8/B/B high-power stud terminal is suitable for wire size 70mm2. The cable terminal, when placed on the stud and tightened, forms a secure contact with another terminal or busbar.
HSKG185/M12/B/B high-power stud terminal is suitable for wire size 185mm2. The cable terminal, when placed on the stud and tightened, forms a secure contact with another terminal or busbar.
HSKG 70/M8/B/B Part number
HSKG 70/M8/B/B
HSKG 185/M12/B/B RATED VOLTAGE/ MAX CURRENT
Colour
BEIGE
IEC
Conductor mm2/AWG
Pack quantity
1000/192
70/14-00
1
Part number
HSKG 185/M12/B/B
HSKG 70/M8/B/B accessories
Colour
RATED VOLTAGE/ MAX CURRENT
BEIGE
IEC
Conductor mm2/AWG
Pack quantity
1000/353
185/10-Kcmil 500
1
HSKG 185/M12/B/B accessories SES 35
Accessory type
ES 35
Part number
Cover profile ADH
ADH 70 (COLOUR)
QS cross-connection rail
QS 2/70/8
QS cross-connection rail
SES 35
Colours available
YELLOW
Pack quantity 1
BLUE
-
1
Accessory type
ES 35
Part number
Cover profile ADH
Colours available
ADH 185 (COLOUR)
6.0mm
DIN rail mounted terminals & accessories
HSKG 70/M8/B/B wire cross section 70mm2
QS cross-connection rail
QS 2/185/12
QS cross-connection rail
YELLOW
Pack quantity
1
BLUE
-
1
QS 3/70/8
-
1
QS 3/185/12
-
1
End stop – snap on
SES 35
Beige
1
End stop – snap on
SES 35
Beige
1
End stop – screw on
ES 35
Beige
1
End stop – screw on
ES 35
Beige
1
ES 35 KST
Beige
1
End stop – screw on heavy duty
ES 35 KST
Beige
1
144.0 x 210.0mm 144.0 x 210.0mm
End stop – screw on heavy duty
HSKG 120/M10/B/B wire cross section 120mm2
6.0mm
HSKG120/M10/B/B high-power stud terminal is suitable for wire size 120mm2. The cable terminal, when placed on the stud and tightened, forms a secure contact with another terminal or busbar.
Part number
HSKG 120/M10/B/B
RATED VOLTAGE/ MAX CURRENT
Colour
BEIGE
IEC
Conductor mm2/AWG
Pack quantity
1000/269
120/10-Kcmil 250
1
SES 35
Accessory type
Part number
Cover profile ADH
HSKG300/M16/B/B high-power stud terminal is suitable for wire size 300mm2. The cable terminal, when placed on the stud and tightened, forms a secure contact with another terminal or busbar.
HSKG 300/M16/B/B
Colour
RATED VOLTAGE/ MAX CURRENT
BEIGE
IEC
Conductor mm2/AWG
Pack quantity
1000/520
300/10-Kcmil 600
1
SES 35
ES 35
Colours available
Pack quantity
Accessory type
Part number
1
Cover profile ADH
1
QS cross-connection rail
QS 2/300/16
QS 3/120/10
-
1
QS cross-connection rail
QS 3/300/16
SES 35
Beige
1
End stop – snap on
ES 35
Beige
1
End stop – screw on
ES 35 KST
Beige
1
End stop – screw on heavy duty
QS 2/120/10
QS cross-connection rail
YELLOW
BLUE
ADH 300 (COLOUR)
ES 35
Colours available
YELLOW
BLUE
Pack quantity
1
-
1
-
1
SES 35
Beige
1
ES 35
Beige
1
ES 35 KST
Beige
1
26.0mm
26.0mm
End stop – screw on heavy duty
Part number
-
ADH 120 (COLOUR)
QS cross-connection rail
412
HSKG 300/M16/B/B wire cross section 300mm2
HSKG 300/M16/B/B accessories
HSKG 120/M10/B/B accessories
End stop – screw on
144.0 x 210.0mm 144.0 x 210.0mm
HSKG 300/M16/B/B
HSKG 120/M10/B/B
End stop – snap on
DIN rail mounted terminals & accessories
HSKG stud connection system
CONNECT
6.0mm
6.0mm
CONNECT
413
en Haloge Fre
SPECIFICATIONS
Slotted DIN rail and brackets
To fit SRK 2.5 terminals or those wider than 5mm.
Material Polyamide 6.6 UL 94 - V2 Temperature range -40°C to +105°C Standards RoHS 2 compliant
A galvanised steel DIN rail manufactured to a high
SB5 terminal markers Marks included
Colours available
Marker size L x W (mm)
Markers per row
Pack quantity
degree of dimensional accuracy. Available in lengths from 250mm to 2m. Steel brackets are available – height 48mm.
SB5/10FW-1
1-10
Black on white
5x5
10
1
SPECIFICATIONS
SB5/10FW-2
11-20
Black on white
5x5
10
1
SB5/10FW-3
21-30
Black on white
5x5
10
1
SB5/10FW-4
31-40
Black on white
5x5
10
1
SB5/10FW-5
41-50
Black on white
5x5
10
Material Galvanised steel Standards Complies with DIN EN 60715. RoHS 2 compliant
SB5/10FW-6
51-60
Black on white
5x5
10
1
SB5/10FW-7
61-70
Black on white
5x5
10
1
SB5/10FW-8
71-80
Black on white
5x5
10
1
81-90
Black on white
5x5
10
1
SB5/10FW-9 SB5/10FW-10
144.0 x 210.0mm 144.0 x 210.0mm 91-100
Black on white
5x5
10
1
6.0mm
Description
Size
TS15/250
250mm slotted rail
250mm
Pack quantity 1
TS35/250
250mm slotted rail
250mm
1
TS35/F.10
1000mm slotted rail
1m
10
TS35/F
2000mm slotted rail
2m
20
TSTW/M5
Bracket – 45° angle
48mm
1
TSTW/M6
Bracket – 45° angle
48mm
1
DIN rail cutting tool
SB6 terminal markers Marks included
Colours available
Marker size L x W (mm)
Markers per row
Pack quantity
SB6/10FW-1
1-10
Black on white
5x6
10
1
SB6/10FW-2
11-20
Black on white
5x6
10
1
SB6/10FW-3
21-30
Black on white
5x6
10
1
SB6/10FW-4
31-40
Black on white
5x6
10
1
SB6/10FW-5
41-50
Black on white
5x6
10
1
SB6/10FW-6
51-60
Black on white
5x6
10
1
SB6/10FW-7
61-70
Black on white
5x6
10
1
71-80
Black on white
5x6
10
1
SB6/10FW-9
81-90
Black on white
5x6
10
SB6/10FW-10
91-100
Black on white
5x6
10
26.0mm
Part number
414
Part no.
Material Polyamide 6.6 UL 94 - V2 Temperature range -40°C to +105°C Standards RoHS 2 compliant
To fit SRK 4.0 terminals or those wider than 6mm.
12.0mm SB6/10FW-8
144.0 x 210.0mm 144.0 x 210.0mm
1
SPECIFICATIONS
Markers: SB6 range to fit SRK 4.0 terminals
DIN rail and bracket
SPECIFICATIONS • Suitable for 35mm top hat DIN Rail. • 350mm long handle • Clamps onto a vice or bolts on bench. • Produces half cut for end stops. No burrs. • Open throat with unique design and replaceable blades.
Cutting tool Part number
Description
Pack quantity
1
DIN-CUTTER
DIN rail cutter
1
1
DIN-CUTTER BLADE
Spare blade
1
26.0mm
Part number
6.0mm
DIN rail mounted terminals & accessories
Markers: SB5 range to fit SRK 2.5 terminals
DIN rail & DIN rail cutting tool
DIN rail mounted terminals & accessories
HF
Other accessories
CONNECT
6.0mm
Terminal markers
6.0mm
CONNECT
415