Learning Tutorials
Tutorial : How to create offset using through point option In this tutorial you will learn, how to create offset using through point option.
CADIN360.COM LEARNING TUTORIALS Let’s learn how to create offset using Through point option of Offset command. In AutoCAD Offset command is used to draw parallel lines, polylines, concentric circles, arcs, and curves at a specified distance from the original object. To create an offset you have to specify the offset distance and the side to offset. To learn, how to create offset using Through point option of Offset command follow below mentioned steps. 1. Now, click on the Offset command in Modify panel under Home tab.
Offset command creates concentric circles, parallel lines, and parallel curves. You can offset an object at a specified distance or through point. After you offset objects, you can trim and extend them as efficient method to create drawings containing many parallel lines and curves. You can also activate Offset command by entering OFFSET or O at the Command line. Another method to select the Offset command is also available. You can select the Offset command from Menu Bar > Modify > Offset. You can also find Offset command in Modify toolbar of the AutoCAD classic workspace.
All the information, pictures, logos are property of their respective owners & our presented for information & learning purpose only
CADIN360.COM LEARNING TUTORIALS 2. Then, type T for Through point option.
3. Next, press Enter to accept the option.
You can also use Spacebar or Right-click in place of Enter key. All the information, pictures, logos are property of their respective owners & our presented for information & learning purpose only
CADIN360.COM LEARNING TUTORIALS 4. Next, select line to offset.
5. Next, specify through point.
All the information, pictures, logos are property of their respective owners & our presented for information & learning purpose only
CADIN360.COM LEARNING TUTORIALS 6. Next, press Enter to exit the Offset command.
You can also exit the Offset command by pressing the Spacebar. You can also right-click to display the shortcut menu and then select the Enter or Cancel option from it to exit the Offset command.
All the information, pictures, logos are property of their respective owners & our presented for information & learning purpose only
CADIN360.COM LEARNING TUTORIALS 7. Observe that, offset line is created at a specified through point by the use of Through point option of Offset command.
8. For more tutorials visit www.cadin360.com
All the information, pictures, logos are property of their respective owners & our presented for information & learning purpose only
Learning Tutorials