Learning Tutorials
Tutorial : How to stretch objects using Stretch command In this tutorial you will learn, how to stretch objects using Stretch command.
CADIN360.COM LEARNING TUTORIALS Let’s learn How to stretch objects using AutoCAD Stretch command. In AutoCAD Stretch command stretches objects crossed by a selection window or polygon. Objects that are partially enclosed by a crossing window are stretched. Objects that are completely enclosed within the crossing window, or that are selected individually, are moved rather than stretched. Several objects such as circles, Ellipses, and blocks, cannot be stretched. STRETCH moves only the vertices and endpoints that lie inside the crossing selection, leaving those outside unchanged. STRETCH does not modify 3D solids, polyline width, tangent, or curve-fitting information.
To learn how to stretch objects using AutoCAD Stretch command follow the below mentioned steps. 1. Now, click on the Stretch command in Modify panel under Home tab.
You can also activate Stretch command by entering STRETCH or S at the Command Line. Another method to select the Stretch command is also available. You can select the Stretch command from Menu Bar > Modify > Stretch. You can also find Stretch command in Modify toolbar of the AutoCAD classic workspace.
All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.
CADIN360.COM LEARNING TUTORIALS 2. Then, use crossing window to partially select objects.
3. Next, press Enter to accept the object selection. 4. Next, specify base point.
All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.
CADIN360.COM LEARNING TUTORIALS 5. Next, specify second point.
6. Observe that, object is stretched up to specified point.
All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.
CADIN360.COM LEARNING TUTORIALS 7. There are various methods to activate the Stretch command. 8. You can activate the Stretch command from command line. 9. Next, type S or STRETCH in command line.
10. Next, press Enter or Spacebar to activate the Stretch command. 11. Next, press ESC key to exit the stretch command.
All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.
CADIN360.COM LEARNING TUTORIALS 12. You can also activate the Stretch command from Menu Bar. 13. Next, click on the Modify menu bar.
14. You can select the Stretch command from Modify menu bar.
All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.
CADIN360.COM LEARNING TUTORIALS 15. You can also activate the Stretch command from the Modify toolbar. 16. Next, click on the Tools menu bar.
17. Next, click on the Modify toolbar.
All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.
CADIN360.COM LEARNING TUTORIALS 18. Observe that, Modify toolbar is appeared.
19. You can select the Stretch command from the Modify toolbar.
20. Click on the close button of Modify toolbar. 21. For more tutorials visit www.cadin360.com All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.
Learning Tutorials