Thread Sealants
Jet-Lube thread sealants are manufactured to seal and secure metal, plastic and fiberglass piping and fittings by filling the voids and imperfections on the threaded surfaces and to eliminate back flow through the threads, thus causing a leak pattern. Jet-Lube thread sealants prevent leakage caused by vibration loosening, solvent evaporation, damaged threads and temperature cycling. All sealants are specially manufactured to meet plumbing codes for use in natural gas applications, fire sprinkler system installations and general purpose applications for threaded plastic pipe.
V-2®
TFW™
-Rated: 70°F to 500°F (-57°C to 260°C) • NSF 61 Cetified • #21265 • Uniform Plumbing Code: IAPMO #1282 • Biodegradable • MIL-TT-S-1732 • No VOC • Seals to 10,000 psi • Friction Factor - .07 • Brushable to 0°F • Contains PTFE • Safe to use on PVC & Fiberglass Fittings • No Odor
Rated: -70°F to 500°F (-57°C to 260°C) • Biodegradable • Non-Melt • Contains PTFE • No VOC • Brushable to 0°F • 10,000 psi Rating (Liquids) • MIL-TT-S-1732 • Friction Factor - .07
Multipurpose Pipe Thread Sealant with PTFE
V-2 is a combination of vegetable oil, PTFE and inert fillers that are environmentally safe, nontoxic for use in potable water applications, on NPT and standard pipe fittings. It's is a soft setting product, so you can remove the fitting without damage to the threads. This formulation also has rust and corrosion inhibitors built in so the connection/fitting will not rust or corrode. V-2 also has a bacteria/fungistat which is a food grade additive that will eliminate bacterial culturing.
12
PTFE Fire Sprinkler, Pressurized Air and Natural Gas Pipe Thread Sealant
TFW is manufactured to seal NPT threads for metal piping, threaded ball valves and for applications where PVC with ABC is used. This special formula is ideal for fire sprinkler applications where glycol testing is required. TFW provides sealing upon application and can be pressurized to 10,000 psi for liquids and 2,000 psi for natural gas and pressurized air lines. The soft setting formula is ideal where disassembly of fittings is required. The rust and corrosion inhibitors are built in to assure trouble free disassembly and help eliminate damage to the threaded fitting. The formula is built around micro-fine particles which allow fittings and valves to be assembled with ease, and ensures immediate seal and pressurization.
