induStriAL
produCt CAtALoG
feAturinG:
perSonAL SAfety & trAffiC SAfety produCtS
www.jacksonsafety.com
ANSI Standards
“The American National Standards Institute (ANSI) is a private, non-profit organization that administers and coordinate the U.S. voluntary standardization and conformity assessment system.” In order to maintain ANSI accreditation, a manufacturer must adhere to a set of requirements or procedures known as the “ANSI Essential Requirements.” They are also responsible for writing the voluntary industry standards for OSHA compliance. OSHA does not approve products, but they provide the criteria necessary to meet ANSI standards. www.ansi.org
• ANSI Z87.1+-2003 • Goggles, Spectacles, Visors, Helmets • ANSI Z89.1-2003 • Safety Caps • ANSI S3.19 • Hearing • ANSI Z308.1 • First Aid
NVLAP Standards
ASMC is also accredited under the NVLAP, a U.S. Department of Commerce program that examines test facilities, equipment, policies and procedures, calibration protocols, administrative independence, and personnel training.
NIOSH
42CFR84 • Respirators (reference page 24)
MUTCD Requirements
MUTCD, the Manual on Uniform Traffic Control Devices defines, the standards used by traffic engineers and project managers nation-wide to install and maintain traffic control devices on streets and highways.
NCHRP-350
As required by the Federal Highway Administration (FWHA), work zone traffic control devices must be crash worthy and qualify as such according to the testing and acceptance guidelines of the National Cooperative Highway Research Program Report 350 (NCHRP-350).
ANSI-ISEA 107-2004 STANDARD: This standard specifies minimum amounts of retroreflective materials, colors and placement of materials, for items used to enhance the visibility and safety of workers. Performance Class guidelines are identified with corresponding recommendations for selection based on worker risk hazards, such as complex backgrounds, vehicular traffic and speeds encountered. See abbreviated definitions below: Class 1 - Provides the minimum amount of required material to differentiate the wearer from the work environment. Class 2 - Provides superior visibility for wearers by the additional coverage of the torso, and is more conspicuous than Performance Class 1. Class 3 - While the type of garment and the size of the wearer dictate the area of clothing, it is the intention of this standard for Performance Class 3 to offer greater visibility to the wearer in both complex backgrounds and through a full range of body movements. Additionally, visibility is enhanced beyond Performance Class 2 by the enhancement of background and reflective materials to the arms and/or legs. Regardless of the area of materials used, a sleeveless garment or vest alone shall not be considered Performance Class 3.
PATENTS
Jackson Welding Helmets and Lenses are covered by one or more of the following U.S. patents: D310,432; D349,588; D353,692; D431,328; 5,208,688; 5,248,880; 5,252,817; 5,347,383; 5,377,032; 5,515,186; 5,519,522; 5,533,206; 5,751,258; 5,959,705; 6,067,129; 6,070,264; 6,151,711; 6,260,197; 6,341,382; and related foreign patents. Other U.S. and foreign patents pending. For additional patent numbers contract Jackson Products, Inc. American Allsafe floor signs are covered by U.S. patent D.395,334 and Canadian design registration No.83761
WARNING
Read this section completely before selecting your Jackson Safety products. Our products are tested to meet the standards of the American National Standards Institute* (ANSI) and other applicable standards. All warning statements, operating instructions and industry standards should be complied with at all times. Please read any and all warning statements attached to or associated with any Jackson Safety product prior to use. Failure to use only Jackson Safety designed, produced and tested components, attachments and replacement parts can adversely affect product performance resulting in serious injury. Installing generic parts or components voids all standards compliances, all guarantees and warranties and makes the installer solely liable for the consequences.
ASMC is proud to be an active member of the safety industry community.
ALLSAFE-SMC ™
Customer Service 1-800-428-8185
A DIVISION OF JACKSON SAFETY
TABLE OF CONTENTS SAFETY EYEWEAR FACE PROTECTION HEAD PROTECTION HEARING SAFETY RESPIRATORY SAFETY SEASONAL SAFETY APPAREL TRAFFIC SAFETY BARRICADES VERTICAL PANELS DRUMS CONES ROLL UP SIGNS STOP/SLOW PADDLES FLAGS MOTOR SAFETY FENCING FLOOR WARNING FIRST AID WELDING
4 12 14 18 24 26 30 38 40 42 43 44 51 55 56 58 60 62 66 68
The Jackson SAFETY Family of Products TM
TM
Services & Materials
Your Ultimate Safety Solution
SAfety eyeWeAr
www.jacksonsafety.com
ALL EYEWEAR MEETS ANSI Z87.1+ IMPACT STANDARD BASE
CURV
bASe Curve: 7 Base curve is the measurement
of a spectacle lens or curvature. The higher the base curve, the greater the sweep of the spectacle. This provides more wrap-around protection, peripheral vision and eliminates the need for side shields.
Anti-foG LenS CoAtinG:
E
We’ve subjected our lenses to extensive testing. We froze them. Heated them. Soaked them. Cleaned them. We put them through To assess the effect of ultraviolet radiation (UV) on the humidity and antihuman eye, the following photo biologic scheme divides the static tests. No matter UV spectrum into three bands or regions: what we tried, our UV-A (320-400 nm): FogGard®Plus lenses Unfiltered exposure to high levels (>200J/cm2) of radiation may produce wouldn’t fog up. In fact, severe reactions to all layers of the cornea. these tests, combined UV-B (290-320 nm): with on-the-job field Unfiltered exposure to twice the threshold of radiant exposure (2 x HL*) evaluations, indicate may produce permanent cataracts. UV-C (200-290 nm): the FogGard®Plus Unfiltered exposure to twice the threshold of radiant exposure (2 x HC*) coating will eliminate may produce photokeratitis (“welder’s flash”). lens fogging in 99% of * L = Lens, C = Cornea. Consult the American Conference of Governmental Industrial Hygienists for workplace applications. the corresponding Threshold Limit Values (TLV).
uv rAdiAtion bioLoGiC effeCtS:
Transmission Data
Transmission (%)
100%
Lens Color Clear
80%
Amber
60%
Smoke
40%
Vermillion Mirror
20% 0% 200
Blue Shield
300 400 500 600 700 Wavelength in Nanometers (nm)
800
the test Fog Test: Lens placed in 0° F temperature for 10 minutes, Pulled out to ambient temperature (68-70°F) and held over steam generated by boiling water for 30 seconds. Humidity Test: Lens placed in controlled chamber (90°F, 95% R.H.) for 30 minutes.
FogGard Plus
PASS FAIL
PASS
PASS
PASS
Anti-Static Test: Lens rubbed 5 times on cotton fabric then held 1” above ash.
PASS
Cleaning: Coating resistant to liquid and or tissue-type lens cleaners.
your Lens PASS
Fog Test: Lens placed in 120°F temperature for 10 minutes, pulled out to ambient temperature.
Adhesion Test: Cross hatching 10”x10 1/8” grid pattern placed on lens surfaces and coating pulled with a transparent tape to check for delamination
®
FAIL PASS FAIL PASS FAIL
PASS
PASS
FAIL
PASS
PASS FAIL
LENS OPTIONS: All spectacle lenses are made of polycarbonate material, which provides 99.9% UV protection
LENS COATINGS:
• Polarized Lens: Protection from glare reduces eye fatigue • Hard Coat: for scratch resistance • Anti-Fog: (AF) for humid environments and extreme temperature variances • Uncoated: for economical budgets • Visiclear™: Prevents flash fogging
STANDARD LENS TINTS: Tints offered on the majority of our eye wear. Clear Lens - All purpose no tint lens, for indoor and outdoor use, UV protection Smoke Lens - All purpose smoke sunglass, for outdoor use where bright sunlight can cause eyestrain and fatigue, UV protection Amber Lens - All purpose yellow lens, for enhanced contrast in low-light areas, excellent for inspection stations, UV protection
SPECIALTY LENS TINTS: Tints only offered on specific glasses
Copper Blue Block/Blue Shield - filters out blue light for enhanced contrast while providing maximum protection from U.V. light. IR 3.0 Lens -- Protects against infrared light. Perfect for cutting and brazing applications IR 5.0 Lens -- Protects against infrared light. Perfect for cutting and brazing applications Smoke Mirror Lens - Mirrored smoke tint sunglass with outer mirror finish coating, for outdoor use where sunlight can cause eyestrain and fatigue, UV protection Silver Mirror Lens - Mirrored smoke tint sunglass with outer silver finish coating, for outdoor use where sunlight can cause eyestrain and fatigue, UV protection Blue Mirror Lens- Mirrored smoke tint sunglass with outer blue mirror finish coating, for outdoor use where sunlight can cause eyestrain and fatigue, UV protection Gold Mirror Lens - Mirrored smoke tint sunglass with outer gold mirror finish coating, for outdoor use where sunlight can cause eyestrain and fatigue, UV protection Red Mirror Lens - Mirrored smoke tint sunglass with outer red mirror finish coating, for outdoor use where sunlight can cause eyestrain and fatigue, UV protection Metallic Rainbow Lens - Mirrored smoke tint sunglass with outer rainbow mirror finish coating, for outdoor use where sunlight can cause eyestrain and fatigue, UV protection Copper Lens - Helpful in hazy or foggy conditions by enhancing contrast Orange Lens - Increases contrast, visibility and detail. Used mostly for cloudy or hazy days. Indoor/Outdoor Lens (I/O) - Helps reduce glare outdoors, while still effective in low-light areas Blue Lens - Reduces eyestrain and fatigue in facilities using sodium vapor lighting
Gray Green Lens - All purpose sunglass for outdoor use where sunlight can cause eyestrain and fatigue **Actual lens color may vary according to each style**
ALLSAfe ™
Customer Service 1-800-428-8185
5
A DIVISION OF JACKSON SAFETY
ALL EYEWEAR MEETS ANSI Z87.1+ IMPACT STANDARD
MAGnuM 3G™ ®
• Ergonomically dimensioned 3 point fit • Hinge stops eliminate scratches • Ergonomic self-adjusting rubber nose pad with rubber fingers
• Elimination of retention screws with new mechanical snap fit lens
• Available in reduced sizes for small faces • Standard package 12
BASE CURV
7
BLACK FRAME, CLEAR LENS BLACK FRAME, FF CLEAR LENS BLACK FRAME, SMOKE LENS METALLIC GRAY FRAME, I/O LENS PLATINUM FRAME, TEAL LENS BLACK FRAME, AMBER LENS, COPPER FRAME, RED MIRROR LENS BLACK FRAME, COPPER BLUE BLOCK LENS BLACK FRAME, GOLD METALLIC MIRROR LENS BLACK FRAME, IR 3.0 LENS BLACK FRAME, IR 5.0 LENS BLACK FRAME, FOG FREE SMOKE LENS PLATINUM FRAME, CLEAR LENS PLATINUM FRAME, ORANGE LENS MINI, MINI, MINI, MINI, MINI, MINI,
BLACK FRAME, CLEAR LENS BLACK FRAME, COPPER BLUE BLOCK LENS BLACK FRAME, MIRROR LENS BLACK FRAME, SMOKE LENS BLACK FRAME, AMBER LENS GRAY FRAME, I/O LENS
E
neW for 2007
E
3011699 3011703 3011702 3011701 3011698
E
ergonomically contoured temples Sure-grip rubber temple inserts provide a sure fit and make a bold fashionable look Standard package 12 BLACK FRAME, CLEAR LENS BLACK FRAME, SMOKE LENS BLACK FRAME, MIRROR LENS METALLIC GRAY, GRADIENT SMOKE LENS CHROME FRAME, BLUE MIRROR LENS
• • • • • •
Code 4™ • • • • • •
Ergonomic metallic finish frame Brow bar for stability and style Self-adjusting silicone nose pad Rubber coated temple tips Hinge stops prevent scratches Standard package 12
3012787 3012788 3012789 3012790
7
CURV
10x™
• Quality frame and stylish
•
BASE CURV
38 SpeCiAL™ •
10
CURV
8
BASE
E
BASE
Scratch resistant polycarbonate lens Ribbed rubber nose cushion Contoured temple tips for precise fit Hinge stops prevent lens damage Weighs less than an ounce Standard package 12
3011685 3011687 3011688 3011689 3011690
MATTE CHROME FRAME, CLEAR LENS CHROME FRAME, RED MIRROR LENS BRONZE FRAME, SMOKE LENS MATTE BLACK FRAME, AMBER LENS
BLACK FRAME, COPPER BLUE BLOCK LENS BLACK FRAME, CLEAR LENS BLACK FRAME, MIRROR LENS PLATINUM FRAME, ORANGE LENS BLACK FRAME, SMOKE LENS
neW for 2007
E
3013122 3013123 3013124 3013125
GUN GUN GUN GUN
METAL FRAME, CLEAR METAL FRAME, AMBER LENS METAL FRAME, SMOKE LENS METAL FRAME, I/O LENS
E
chrome temples
• Includes carrying pouch • Standard package 12
• Futuristic, frameless design with • •
lens, hinge, and nose pad post molded as one unit Distortion free protection Standard package 12
3011693 3011694 3011695 3011696 3011697
PEWTER FRAME, CLEAR AF LENS PEWTER FRAME, CLEAR LENS COPPER FRAME, ORANGE LENS BLACK FRAME, SMOKE LENS CHROME FRAME, SILVER MIRROR LENS
poLArized LenS
8
CURV
• One piece lens • Hinge stops prevent scratches • Combination gun metal frame and
phAntoM™
BASE CURV
SiGMA
7
CURV
8
BASE
E
BASE
vieWMASter™
• Polarized lens offers protection from glare and reduces eye fatigue
• Ergonomically designed temples
and pressure pads provide comfort
• Includes carrying pouch • Standard package 12 3011704
METALLIC GRAY, POLARIZED GRAY LENS
SAfety eyeWeAr
StAndArd 3011672 3011670 3011674 3011681 3011679 3011676 3011680 3011671 3011824 3011668 3011669 3011840 3011841 3011678 Mini 3011673 3013026 3013025 3011675 3011677 3013027
SAfety eyeWeAr
www.jacksonsafety.com
ALL EYEWEAR MEETS ANSI Z87.1+ IMPACT STANDARD
30-06™ reAderS • • • •
BASE
E
neW
CURV
7
Stylish ergonomic nylon frame Soft rubber nose pad Available in black & tortoise frames +1.0 - +3.0 diopters available
3011712 3011713 3011714 3011716 3011717 3011718 3011719 3011720 3011724 3011725 3011726
TORTOISE FRAME, BROWN LENS, +1.5 TORTOISE FRAME, BROWN LENS, +2.0 TORTOISE FRAME, BROWN LENS, +2.5 BLACK FRAME, CLEAR LENS, +1.0 BLACK FRAME, CLEAR LENS, +1.5 BLACK FRAME, CLEAR LENS, +2.0 BLACK FRAME, CLEAR LENS, +2.5 BLACK FRAME, CLEAR LENS, +3.0 BLACK FRAME, AMBER LENS, +1.5 BLACK FRAME, AMBER LENS, +2.0 BLACK FRAME, AMBER LENS, +2.5
neW
for 2007
neW
for 2007
for 2007
BASE
E
reAder
E
E
™
duAL SeGMent reAder
• Lightweight design • Sleek, popular styling with an
• +1.0 - +3.0 diopters available • Perfect for individuals who work • Larger lens for more complete wrap above their heads or upside down
• +1.0 - +3.0 diopters available
• Distortion free forward vision
3014253 3014254 3014255 3014256 3014257
3013305 3013306 3013307 3013308 3013309
economical price
FRAME, FRAME, FRAME, FRAME, FRAME,
CLEAR CLEAR CLEAR CLEAR CLEAR
LENS, LENS, LENS, LENS, LENS,
around protection
+1.0 +1.5 +2.0 +2.5 +3.0
BLACK BLACK BLACK BLACK BLACK
FRAME, FRAME, FRAME, FRAME, FRAME,
CLEAR CLEAR CLEAR CLEAR CLEAR
LENS, LENS, LENS, LENS, LENS,
E
19492 19494 19496 19493 19495 19497 19498 19564
E
3000303 3000305 3000307 3000304 3000306 3000308 3000309 3005259 3011600
9
enviSion™
• Sporty wrap around look • Adjustable ratchet temple for • •
custom fit Soft grip comfort temple Standard package 12
CLEAR/SILVER/CLEAR, CLEAR LENS 3000338 SMOKE/SILVER/SMOKE, SMOKE LENS 3000339 AMBER/BLACK/AMBER, AMBER LENS 3000340 CLR/SLVR/CLR, CLR FOGGARD® LENS 3000341 SMK/SLR/SMK, SMK FOGGARD® LENS 3000342 BLUE/BLACK/BLUE, BLUE MIRROR LENS BLACK/BLACK/INDOOR/OUTDOOR LENS BLUE SHIELD/SILVER/BLK, BLUE SHIELD BLUE/BLACK/BLACK, BLUE LENS
19742 19743 19744 19745 19746
BLACK BLACK BLACK BLACK BLACK
6
FRAME, CLR FOGGARD® LENS FRAME, SMOKE LENS FRAME, AMBER LENS FRAME, I/O LENS LENS FRAME, BLUE MIRROR LENS
CURV
• • •
BASE CURV
• One-piece polycarbonate front with adjustable temples Wrap-around protection Sleek lightweight and comfortable Standard package 12
BLACK FRAME, CLEAR, +1.5 TOP/+1.5 BOTTOM BLACK FRAME, CLEAR, +2.0 TOP/+2.0 BOTTOM BLACK FRAME, CLEAR, +2.5 TOP/+2.5 BOTTOM
BASE CURV
viSio™
3013327 3013328 3013329
+1.0 +1.5 +2.0 +2.5 +3.0
BASE
8
•
and need to look up for near vision as well as down Prevents neck and eye strain
E
BLACK BLACK BLACK BLACK BLACK
CURV
CURV
reAder
CURV
8
9.5 ™
7
BASE
BASE
CudAS™
• Lens curve provides peripheral vision and protection
• Durable, modified nylon frame • Adjustable temple for comfort • Standard package 12 3000287 3000288 3000289 3000290 3000291 3000292 3005220 3000293 3000322 3000294 3000295 3000296
19142 19143 19144 19145 19146 19147 19148 19149 19563 19157 19158 19159
BLACK FRAME, CLEAR LENS BLACK FRAME, CLR FOGGARD® LENS BLACK FRAME, SMOKE LENS BLACK FRAME, SMKE FOGGARD® LENS BLACK FRAME, SUNBURST LENS BLACK FRAME, BLUE STEEL LENS BLACK FRAME, VERMILION LENS BLACK FRAME, AMBER LENS BLACK FRAME, I/O LENS BLUE FRAME, CLEAR LENS BLUE FRAME, CLEAR FOGGARD® LENS BLUE FRAME, SMOKE LENS
ALLSAfe ™
Customer Service 1-800-428-8185
7
A DIVISION OF JACKSON SAFETY
ALL EYEWEAR MEETS ANSI Z87.1+ IMPACT STANDARD
™
• • • • •
Sleek, sporty style Soft touch temples Lightweight construction Single lens wrap-around protection Standard package 12
BASE
3000354 3000355 3000356 3000357 3000358 3000359 3004762 3004761 3011373 3011374 3011375 3011376
E
for 2007
BASE
30-06™
E
• Frameless ultra-lightweight design • No-brow design increases upward
• Stylish ergonomic GS7 nylon frame
• Extreme lightweight design peripheral vision • High performance polycarbonate lens • and Slip-stop temples • Flex point temples for comfort and • Standard package 12 stability • Standard package 12 3013536 3013537 3013538 3013539 3013540 3013545 3013543 3013544 3013541 3013542 3013546
FRAME, CLEAR LENS FRAME, CLEAR AF LENS FRAME, SMOKE MIRROR LENS FRAME, AMBER LENS FRAME, I/O LENS FRAME, LIGHT BLUE LENS FRAME, BLUE MIRROR LENS FRAME, IR 3.0 LENS FRAME, IR 5.0 LENS
E
BLACK FRAME, CLEAR LENS BLACK FRAME, COPPER LENS OLIVE METALLIC FRAME, GOLD MIRROR OLIVE METALLIC FRAME, SMOKE LENS OLIVE METALLIC FRAME, AMBER LENS
8
9.5 E
3011705 3011706 3011708 3011709 3011710
BASE
™
• Lightweight design • Sleek, popular styling with an economical price
• Universal nose bridge for comfort • Standard package 12 3004880 31005 3004882 31006 3004883 31007 3011379 3011380
BLACK BLACK BLACK BLACK BLACK
FRAME, CLEAR LENS FRAME, SMOKE LENS FRAME, AMBER LENS FRAME, I/O LENS FRAME, BLUE MIRROR
CURV
•
adjusting fingers Standard package 12
TORTOISE FRAME, DARK BROWN LENS TORTOISE FRAME, CLEAR LENS TORTOISE FRAME, RED MIRROR LENS GREY METALLIC FRAME, SMOKE LENS TORTOISE FRAME, YELLOW LENS
CURV
• Stylish industrial nylon frame • Sure-grip rubber temple inserts • Ergonomic nose pad with self-
3011715 3011721 3011722 3011723 3011727
BASE
CURV
fLAMe™
•
GUN METAL FRAME, CLEAR LENS GUN METAL FRAME, CLEAR AF LENS GUN METAL FRAME, SMOKE MIRROR LENS GUN METAL FRAME, I/O LENS GUN METAL FRAME, BLUE MIRROR LENS GUN METAL FRAME, AMBER LENS GUN METAL FRAME, IR 3.0 LENS GUN METAL FRAME, IR 5.0 LENS GUN METAL FRAME, BLUE SHIELD LENS CAMO FRAME, BRONZE LENS GUN METAL FRAME, LIGHT BLUE LENS
BASE
7
•
combine with polycarbonate lens for the ultimate in protection. Soft rubber nose pad with self adjusting fingers for all day comfort Standard package 12
E
E
™
™
CURV
7
CURV
8
CURV
8
BASE
E
BASE
BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK
BLACK FRAME, CLEAR LENS BLACK FRAME, CLEAR FOGGARD® BLACK FRAME, SMOKE MRR LENS BLACK FRAME, I/O LENS BLACK FRAME, BLUE MIRROR LENS BLACK FRAME, AMBER LENS BLACK FRAME, IR 3.0 BLACK FRAME, IR 5.0 BLUE FRAME, LIGHT BLUE LENS BLACK FRAME, BLUE SHIELD LENS CAMO FRAME, COPPER LENS GUN METAL FRAME, SMOKE MIRROR WITH CLAM PACK
neW
for 2007
3013851 3013853 3013854 3013855 3013856 3013857 3013858 3013859 3013860
19804 19805 19806 19807 19808 19809 19859 19860
noMAdS • • • •
Lightweight construction Detachable side shields Universal bridge Standard package 10
3003291 3003292 3003293 3003294 3003295
19531 19532 19533 19534 19535
BLACK BLACK BLACK BLACK BLACK
FRAME, CLEAR LENS FRAME, SMOKE LENS FRAME, SILVER MIRROR LENS FRAME, METALLIC RAINBOW FRAME, METALLIC BLUE LENS
SAfety eyeWeAr
neW
CURV
8
SAfety eyeWeAr
www.jacksonsafety.com
ALL EYEWEAR MEETS ANSI Z87.1+ IMPACT STANDARD
neW for 2007
BASE
E
protection
• Fits over most prescription glasses • Standard package 50 3000286 3005206 3000285 3005226 3000298 3005267 3000323 3000324
19100 18333 18832 19237 19238 19614 19630 19631
CLEAR ANTI-FOG UNCOATED LENS CLEAR HARDCOATED LENS CLEAR UNCOATED LENS SMOKE HARDCOATED LENS SMOKE UNCOATED LENS AMBER UNCOATED LENS DARK GREEN FRAME, IR 3.0 LENS DARK GREEN FRAME, IR 5.0 LENS
E
• Wrap-around one piece lens • Side shields provide added
otG: over the GLASS
• Side shields provide added • •
protection Fits over most prescription glasses Standard package 12
3015022 3015023 3015024
BLACK FRAME, CLEAR AF LENS BLACK FRAME, SMOKE MIRROR AF LENS BLACK FRAME, I/O LENS
SpeC diSpLAy-18M
3014039
3014038
ECONO SPEC DISPLAY-6S
SWfS-54i
• Smith & Wesson revolving floor • •
stand Capacity: 54 Glasses Height: 71”, Diameter: 18”
3011828
WHITE, 54 SPINNER
LenS CLeAninG
• Wall mount • For glass, plastic and polycarbonate lenses, goggles and visors
• Anti-fog, anti-static formula • Available in 100 individually
packaged towelettes per box or spray bottle with 100 low lint tissues
SpeC diSpLAy-6S
• Some assembly required • Capacity: 6 Glasses • Height 22”, Diameter: 5”
CURV
uniSpeC ii™
4
CURV
4
BASE
• Locking display eliminates theft • Capacity: 18 Glasses • Height: 17”, Diameter: 11.5” LOCKING SPINNER-18M
SWrd-24i
• Smith & Wesson revolving counter • •
stand Capacity: 24 Glasses Height: 22”, Diameter: 13”
3012156
WHITE, 24 SPINNER
3000555 27636 3000554 27635
LENS CLEANING TOWELETTES DELUXE LENS CLEANING STATION
SpeC diSpLAy-24L
• Locking display eliminates theft • Capacity: 24 Glasses • Height: 17”, Diameter 12” 3014037
LOCKING DISPLAY-24L
SWrd-36i
• Smith & Wesson revolving counter stand
• Capacity: 36 Glasses • Height: 32”, Diameter: 14” 3011827
WHITE, 36 SPINNER
ALLSAFE ™
Customer Service 1-800-428-8185
A DIVISION OF JACKSON SAFETY
ALL EYEWEAR MEETS ANSI Z87.1+ IMPACT STANDARD
Spectacle cords
• Conveniently fits any spectacle to •
have them readily accessible 12 per bag 18594 BLACK 18595 ELECTRIC BLUE 18596 GLACIER GREEN 18597 NEON ORANGE 18598 NEON YELLOW 18599 RED
Safety Chums®
• Breakaway feature answers safety
• F its standard frames, adjustable fit • 25 per bag 3005243 3005244 3005245 3005246 3005247 3005253
concerns
• 25 per bag
19476 stD frame ASSORTED COLORS 19477 BLACK 19478 ROYAL BLUE 19479 RED 19480 NAVY BLUE 19482 LRG Frame ASSORTED COLORS
3005248 3005249 3005250 3005251
19489 Spectacle ASSORTED COLORS 19484 Badge BLACK 19485 badge ROYAL BLUE 19487 badge NAVY BLUE
Custom Safety Spectacle Decorating NEW FOR 2007
CUSTOM SPECTACLE DECORATING DIMENSIONS FRAME STYLE
FRAME SIDE - DIMENSIONS
LENS DIMENSIONS
ENVISION
RIGHT - 1/2” W x 1/4” H
NO LENS PRINTING
VISIO
RIGHT & LEFT - 3/4”W x 1/8” H
1/2” W x 1/2”H
NEMESIS
LEFT - 3/4” W x 1/8” H
3/4” W x 3/8” H
ELEMENT
RIGHT - 1/2” W x 1/4” H
3/4” W x 3/8” H
MAGNUM
RIGHT - 5/16” W x 3/8” H
3/4” W x 3/8” H
38 SPECIAL
RIGHT - 7/8” W x 1/8” H
3/4” W x 3/8” H
CODE 4
RIGHT - 7/8” W x 1/8” H
3/4” W x 3/8” H
CUDAS
RIGHT - 5/8”W x 1/8”H
1/2” W x 1/2”H
VIEWMASTER
RIGHT -3/4”W x 3/8”H
NO LENS PRINTING
PHANTOM
NA
RIGHT ONLY - 1”W x 1/4”H
FLAME
NA
3/4”W x 3/4”H
HELLRAISER
RIGHT - 1/2”W x3/16”H
NO LENS PRINTING
10X
NA
NA
NEMESIS VL
LEFT-3/4”W x 3/16”H
3/4” W x 3/8” H
30-06
LEFT-3/4”W x 3/16”H
3/4” W x 3/8” H
SCREEN PRINTING NOT AVAILABLE ON READER LENS
• • • • • • • •
Minimum order 72 spectacles In order to provide superior screening, we require camera ready artwork (black on glossy white background or film positive with sharp images) A charge will be invoiced for artwork that requires redrawing or typesetting and will add 10-15 business days to lead time 15 standard ink colors available, for other colors customer must provide PMS color information Delivery of pad printed spectacles will take approximately 5-7 business days upon receipt of distributor approval of final artwork A cliche’ charge reflects the cost of creating the custom cliche’. Cliche’ remains the property of Allsafe Services & Materials Lens screening not available on reader lens For more information, call customer service at 800-428-8185, or send an email to asmc@ jacksonproducts.com
S A FETY EYE W E A R
3000283 3005207 3005208 3005209 3005210 3005211
Chums® Original
SAfety eyeWeAr
www.jacksonsafety.com
ALL EYEWEAR MEETS ANSI Z87.1+ IMPACT STANDARD
MonoGoGGLe The history of our protective goggles ®
• Superior impact & chemical splash protection
• Cylindrical shaped lens offers greater range of visibility
• .060 polycarbonate lens 3010334 3010335 3010336 3010337 3010338 3010339 3010340 3010341 3010342 3010349 3010352
CheMiCAL SpLASh GoGGLe
BLUE FRAME, AF CLEAR LENS BLUE FRAME, AF SMOKE LENS BLUE FRAME, AF CLEAR LENS FOAM LINED BLACK FRAME, AF IR 3.0 LENS BLACK FRAME, AF IR 5.0 LENS CLEAR AF REPLACEMENT LENS SMOKE AF REPLACEMENT LENS ANTI-FOG IR 3.0 REPLACEMENT LENS ANTI-FOG IR 5.0 REPLACEMENT LENS SYNTHETIC RUBBER GOGGLE BAND FLAME RETARDANT GOGGLE BAND
• Features the Monogoggle XTR with full face protection
• Full face protection detaches from • •
goggle Curved faceshield conforms to shape of face offering better protection Polycarbonate shield for protection
3010343 3010345 3010346
CheMiCAL SpLASh GoGGLe
Indirect ventilation Soft, pliable plastic nosepiece Pantascopic angle improves vision Patented vents increases airflow .060 polycarbonate lens Standard package 36
3000005 3000013 3005056 3005058
10032 10115 10116 10148
CLEAR CLEAR VISICLEAR™ COMFORT FOAM / CLEAR LENS SMOKE FRAME / CLEAR LENS
CheMiCAL SpLASh GoGGLe ®
All lenses are made with optical grade polycarbonate material and provide 99.9% UV protection. All Monogoggles®, with the exception of the MRXV™ and SG, provide hassle-free adjustments and are outfitted at no extra charge.
CheMiCAL SpLASh GoGGLe
Foam Option
MonoGoGGLe® 211 • • • • • •
BLUE FRAME & FACESHIELD, CLEAR LENS BLACK FRAME, IR 3.0 LENS, GREEN FACESHIELD BLACK FRAME, IR 5.0 LENS, GREEN FACESHIELD
started more than 30 years ago with an anti-fog model designed to protect against chemical splash. That model went on to become the staple of millions of safety programs throughout the industry, and is now synonymous with on-the-job eye protection. You can be confident about the protection our goggles provide. Since 1986, independent, non-governmental organizations have been testing our goggles against rigorous performance standards. Today our line meets ANSI Z87.1-2003 performance criteria. Allsafe-SMC’s unique anti-fog coating has been scientifically formulated after a series of on-the-job evaluations eliminating lens fogging in 99% of workplace applications.
MonoGoGGLe® 202 • • • •
Unventilated Protects from dust, splash & fumes .060 polycarbonate lens Standard package 36
3005052 10024 3005055 10097
CLEAR CLEAR VISICLEAR™
CheMiCAL SpLASh GoGGLe
duSt & iMpACt GoGGLe
MonoGoGGLe® 201
• Direct vent with perforated frame • Ideal for dust & impact protection • Separate, soft, pliable plastic nosepiece for comfortable seal
• .060 polycarbonate lens • Standard package 36 3005051 10013 3005054 10087
CLEAR CLEAR VISICLEAR™
CheMiCAL SpLASh GoGGLe
MonoGoGGLe vpC
reSpirAtor fit
MonoShieLd
3003414
3005057 10140
3005059 10179
• • • • • • •
Indirect ventilation Ideal for splash protection Fits over prescription eyewear Separate, soft, pliable nosepiece Pantascopic design visibility .060 polycarbonate lens Standard package 36 10195
CLEAR VISICLEAR™
• Indirect ventilation • PVC gaskets mate MonoShield™ to • Standard Monogoggle® design MonoGoggle® 211 • Wider nosepiece fits over half mask • Polycarbonate shield respirator • Provides splash & impact protection • .060 polycarbonate lens • Standard package 12 • Standard package 36 CLEAR VISICLEAR™
MONOSHIELD™ W/GOGGLE
ALLSAfe ™
Customer Service 1-800-428-8185
11
A DIVISION OF JACKSON SAFETY
ALL EYEWEAR MEETS ANSI Z87.1+ IMPACT STANDARD
™
• • • • • •
VisiClear™ anti-fog, anti-scratch, anti-static lens coating Accommodates large Rx insert Expanded visual field Cross Vent™ technology keeps air flowing in and moisture out .080 polycarbonate lens provides impact protection Standard package 30 3000048 3000049 3000050 3000051 3009654 3005121 3009655 3009656 3000052 3004737
CheMiCAL SpLASh GoGGLe
BLUE FRAME CLEAR VISICLEAR™ BLUE FRAME SMOKE VISICLEAR™ BLUE FRAME AMBER VISICLEAR™ BLUE FRAME IR 5.0 VISICLEAR™ BLACK FRAME CLEAR VISICLEAR™ BLACK FRAME SMOKE VISICLEAR™ BLACK FRAME AMBER VISICLEAR™ BLACK FRAME IR 5.0 VISICLEAR™ REVOLUTION RX INSERT (25 BAG) REVOLUTION REPLACEMENT BAND
• • FEATURES EXTREME HEAT RESISTANCE
for 2007
Will not melt, drip or ignite at 350° for 5 minutes
• Adjustable side vent to ensure increased air flow • Fits naturally to the contour of your face in order to block out air borne contaminants
• Lightweight and comfortable with a pivot headband that allows optimal placement
• Standard package 12 3013710 3013711 3013712 3013713 3013714
extreMe perforMAnCe proteCtion
duSt & iMpACt GoGGLe
SG30 • • • •
Direct ventilation Economical dust & impact protection .060 polycarbonate lens Standard package 50 or 200
3005067 10260 3009541 10468
200 PK. CLEAR 50 PK. CLEAR
GoGGLetoGGLe™
• Snaps into universal slot on most
caps for proper storage of goggles
3005127
14420
50 PK GOGGLETOGGLE
CLEAR ANTI-FOG LENS SMOKE ANTI-FOG LENS AMBER ANTI-FOG LENS IR 3.0 LENS IR 5.0 LENS
CheMiCAL SpLASh GoGGLe
CheMiCAL SpLASh GoGGLe
SG34
Mrxv ™
• Button vents provide indirect venting • Indirect vents offer splash protection • Economical chemical splash • Spherical lens provides more than protection
• .060 polycarbonate lens • Standard package 100 or 200 3005066 3003415 3005103 3005102
10258 10257 10467 10466
200 PK. CLEAR 200 PK. CLEAR ANTI-FOG 50 PK. CLEAR 50 PK. CLEAR ANTI-FOG
GoGGLe retAiner
360° of vision
• .090 polycarbonate lens • Standard package 36 3005068 3005069 3005070 3005071
10276 10277 10280 10281
BLUE FRAME / CLEAR LENS BLUE FRAME / CLEAR VISICLEAR™ SMOKE FRAME / CLEAR LENS SMOKE FRAME / CLEAR VISICLEAR™
GoGGLe GuArdiAn™
• Goggle Retainer holds goggle firmly • Goggle Guardian™ keeps your in place on cap when not in use
3000057 10511
GOGGLE RETAINER
goggles clean and scratch free
3000059 10514 3000058 10512
GUARDIAN, STARS & STRIPES GUARDIAN, BLACK
SAfety eyeWeAr
neW
10500 10501 10501 10502 10541 10542 10543 10544 10505 10513
heAd & fACe proteCtion ModeL k fACeSAver
• High performance ratchet adjusts in 1/16”
www.jacksonsafety.com HEADGEAR OLD # NEW # 10000 3000001
increments to exact head-size
• “Turn button” visor attachment holds 12” or • •
15.5” visors securely Crown assembly pivots up Sold with or without visor
HEADGEAR W/VISOR OLD # NEW # 27971 3005845
viSorS NEW #
OLD #
DESCRIPTION
STD PACK
ACETATE VISORS
3000121
15023
6154, 6 X 15.5 X .040 - CLEAR, BOUND
24
3000144
15071
F8124L, 8 X 11.5 X .040 - CLEAR
24
3000131
15037
8124L, 8 X 12 X .040 - CLEAR
24
3000145
15073
F8124DL, 8 X 11.5 X .040DG - DARK GREEN
24
3000122
15026
8154, 8 X 15.5 X .040 - CLEAR, BOUND
24
3000118
15013
8124M, 8 X 12 X .040 - MEDIUM, BOUND
24
3000123
15027
8154M, 8 X 15.5 X .040 - GREEN, BOUND
24
3000164
15097
1284D, 8 X 12 X .040 - DARK GREEN, BOUND
24
3000119
15014
8124D, 8 X 12 X .040 - DARK GREEN, BOUND
24
3000152
15085
8124, BULK, 8 X 12 X .040 (50 PER) - CLEAR, BOUND
50
3000120
15016
8126, 8 X 12 X .060 - CLEAR, BOUND
24
3000155
15088
8154, BULK, 8 X 15 X .040 - CLEAR, BOUND
75
3000128
15033
8154L, 8 X 15.5 X .040 - CLEAR
24
3000129
15035
8154MLF, 8 X 15.5 X .040 - MEDIUM FLAT
12
3000124
15028
8154D, 8 X 15.5 X .040 - DARK GREEN, BOUND
24
3000156
15089
8154D, BULK, 8 X 15.5 X .040 - DARK GREEN, BOUND
75
3000130
15036
8154DLF, 8 X 15.5 X .040 - DARK FLAT
12
3000125
15030
8156, 8 X 15.5 X .060 - CLEAR, BOUND
24
3000143
15069
8156M, 8 X 15.5 X .060 - MEDIUM, BOUND
24
3000133
15039
H9154, 9 X 15.5 X .040 - CLEAR, BOUND
24
3000157
15090
H9154, BULK, 9 X 15.5 X .040 - CLEAR, BOUND
75
3000134
15040
H9154M, 9 X 15.5 X .040 - GREEN, BOUND
24
3000135
15041
H9154D, 9 X 15.5 X .040 - DARK GREEN, BOUND
24
3000158
15091
H9154D, 9 X 15.5 X .040 - DARK GREEN, BOUND
75
3000136
15051
H9194, 9 X 19.5 X .040 - CLEAR
24
3000411
22029
9154, CHIN, 9 X 15.5 X .040 - CLEAR
24
3000412
22031
9154M, CHIN, 9 X 15.5 X .040 - GREEN
24
3000146
15076
9204, CHIN, 9 X 20 X .040 - CLEAR
12
OLD # NEW # 10050 3000012
ModeL k-10 • • • •
Pin-lock headband Crown and visor pivot up Holds 12” or 15.5” visors Visor not included
poLyCArbonAte
• All visors made from polycarbonate (A) material.
• Optical-grade thick polycarbonate from
• •
extruded sheets or injection molded resin provide superior secondary impact protection and increased scratch resistance Available molded, flat - 15.5”x 8” Meets ANSI Z87+
ACetAte
• High-grade cast sheet acetate protects • • • •
against dust, small particles, and chemical splash Available aluminum bound and unbound Clear; light green, dark green Various sizes from 12” x 6” to 19.5” x 9” .060 acetate clear visors meets ANSI Z87+
petG
• Provides quality impact protection at an economical price
• Ideal for any worker who needs light • • •
impact protection and is not exposed to high heat applications Offers good scratch resistance and distortion free optics Clear; Dark Green Meets ANSI Z87
propionAte
POLYCARBONATE VISORS
3000147
15078
8154P, 8 X 15.5 X .040 - CLEAR, POLY
24
3009531
15057
8154 PLF, 8 X 15.5 X .040 - CLEAR, POLY
12
3000169
15133
8156P, 8 X 15.5 X .060 - CLEAR, MOLDED, POLY
24
3000162
15095
10206G, 10 X 20 X .060 - GOLD, MOLDED, POLY
1
3000161
15094
10206S, 10 X 20 X .060 - SILVER, MOLDED, POLY
1
3000171
15137
10206P, 10 X 20 X .060 - CLEAR, MOLDED, POLY
24
PROPIONATE VISORS
3000173
15139
8156PP, 8 X 15.5 X .060 - CLEAR, MOLDED, POLY
24
3000159
15092
H9156-5, 9 X 15.5 X .060 - SH5, MOLDED, PROP.
12
3000175
15141
10206PP, 10 X 20 X .060 - CLEAR, MOLDED, POLY
24
MESH SCREEN VISORS
3000127
15021
815WS, 8 X 15.5 X .20 - BLACK STEEL SCREEN, BND
12
3000126
15031
815BS, 8 X 15.5 X .040 - MESH BRASS, BOUND
12
• Injection molded, .060” thick propionate • • •
offers outstanding impact resistance and distortion-free options Clear, dark green 12” x 8” and 15-1/2” x 9” Meets ANSI Z87+
MAteriAL tAbLe Material Polycarbonate Propionate Acetate PETG
Shape
Impact Resistance
Heat Resistance
Optics
Molded/Sheet Molded Sheet Sheet
Best Better Better Good
Best Good Better Good
Best Better Best Good
ALLSAfe ™
Customer Service 1-800-428-8185
A DIVISION OF JACKSON SAFETY
viSorS NEW #
OLD #
13
DESCRIPTION
STD PACK
do not uSe Green tint viSorS for WeLdinG
POLYCARBONATE VISORS
22690
VISOR, 8154C, POLYCARBONATE, 8 X 15.5 X .040
12
3005371
22643
VISOR, 8154B, POLYCARBONATE, 8 X 15.5 X .040, CLEAR
25
3005372
22644
VISOR, 8154LB, POLYCARBONATE, 8 X 15.5 X .040, CLEAR
36
3005373
22645
VISOR, 8154LBMG, POLYCARBONATE, 8 X 15.5 X .040, MED GREEN
25
3005379
22667
VISOR, 8154LBDG, POLYCARBONATE, 8 X 15.5 X .040, Dk GREEN
36
3005374
22646
VISOR, 8156B, POLYCARBONATE, 8 X 15.5 X .060, CLEAR
25
3005375
22647
VISOR, 8156LB, POLYCARBONATE, 8 X 15.5 X .060, CLEAR
36
3005381
22677
VISOR, 8156MOLD, POLYCARBONATE, 8 X 15.5 X .070, CLEAR
50
3005386
22702
VISOR, 9194LB, POLYCARBONATE, 9 X 19.25 X .040, CLEAR
36
3005385
22701
VISOR, 9196LB, POLYCARBONATE, 9 X 19.25 X .060, CLEAR
36
3005377
22655
VISOR, 4200LB, POLYCARBONATE, 10 X 20 X.040, CLEAR
36
bC100 buMp CAp W/viSor AttAChMentS
ACETATE VISORS (ALUMINUM BOUND)
3000450
22740
VISOR, (C)9154, 8 X 12 X.040, CLEAR
24
3000452
22742
VISOR, (C)9154DG, 9 X 15.5 X.040, DARK GREEN
24
VISOR, WS-6513 WIRE SCREEN
30
WIRE SCREEN VISOR
3005383
22692
• Visor attachment system •
ALLSAfe-SMC viSorS NEW #
OLD #
DESCRIPTION
STD PACK VISOR ONLY
PETG VISORS
3005376
22648
VISOR, 8154LB, PETG, 8 X 15.5 X.040, CLEAR
36
3005382
22681
VISOR, 8154LB, PETG, 8 X 15.5 X.040, MEDIUM GREEN
36
3005384
22699
VISOR, 8154LB, PETG, 100 PACK CLEAR, BULK
100
VISOR, 8154LB PETG ECONOMY
100
ECONOMY VISOR
3005399
22761
enables the attachment of a clear PETG visor to cap for increased facial protection Visor sold separately, specify 6” or 8” as below:
A-5500Sn
• Dielectric • Heavy-duty rubber cord holds bracket in place
3000447 22639 A-5500SN
A-5500x
• Lightweight 100% nylon bracket • Pivots up and secures in 3 different positions
3000448 22640 A-5500X
3005392 22722 3005391 22721
6” X 15.5” X .040” 8” X 15.5” X .040”
BUMP CAP WITH VISOR SYSTEM
3000087 3005122 3000090 3009544 3000105
14373 14370 14381 15061 14739
WHITE YELLOW DARK BLUE REPLACEMENT SUSPENSION REPLACEMENT SWEATBAND
A-8100C
• Swivel posts lock visor in place • Heavy-duty, durable aluminum
model fits variety of safety caps
3005839 27908 A-8100C 3000556 27906 A-8100H
HEADGEAR NOT INCLUDED
A-f3000
• Ratchet headband • Crown and visor pivot up 3005840 27910 A-F3000
viSor With Chin Cup • 8”x15.5”x.40” visor • Optical grade polycarbonate 3000449 22690 VISOR W/CHIN CUP
6513 SCreen
• Non-plastic window 3005383 22692 6513 SCREEN
LB: Without Binding, B: Bound, MG: Medium Green, DG: Dark Green, Mold: Molded, C: Acetate
heAd & fACe proteCtion
3000449
HEAD & FACE PROTECTION
www.jacksonsafety.com
PAD PRINTING
We’ve invested in the latest technology to provide you with faster turnaround and superior images. Supplying camera-ready artwork benefits you by avoiding additional fees and longer lead times. The following formats may also be accepted: 3-1/2" diskette (PC only), e-mail, letterhead and business cards. These formats will add lead time and additional cost.
• • • • •
I mages are printed on surface in single or multi-colors Conforms to odd-shaped surfaces Non-metallic inks show up brilliantly Produces fine-line detailing Colors available beyond the listed standard colors
1. Camera ready/photo reproducible artwork: black on glossy white background with sharp images. 2. One imprint per color/per location required. Each color to be imprinted requires a separate die or cliche. NOTE: For multi-color logo work, artwork must have individual color separations. 3. Please specify pad printing or hot stamping. 4. Artwork that requires redrawing, i.e., non-photo reproducible, will add lead time and additional cost. Call AllSafe-SMC Customer Service for more information 1-800-428-8185.
Hot stamping • • • •
Images are embedded into surface in single or multi-colors Conforms to smooth surfaces Metallic colors show up well with this process Images without intricate details look best
Standard foil colors for hot stamping include:
Navy Blue Light Brown
Orange
Dark Green
Lime Green
Chum Blue
Royal Blue
Red
Yellow
Mustard Yellow
NOTE: Approximate colors shown above. Actual colors may vary.
White
Light Brown
Light Gray
Beige
Green
Purple
Burgundy
Light Blue
Dark Brown
Black
Dark Gray
Also available in metallic silver and metallic gold
types and classes standards Protective helmets are classified according to the specific impact and electrical performance requirements they are designed to meet. All protective helmets in accordance with this standard shall meet either Type I or Type II impact requirements. In addition, all helmets are further classified as meeting Class G, Class E, or Class C electrical requirements. Impact Types
• •
ype I: Helmets intended to reduce the force of impact resulting from a blow only to the top of the head. T Type II: Helmets intended to reduce the force of impact resulting from a blow which may be received off center or to the top of the head.
Electrical Classes
• • •
lass G (General): Class G helmets are intended to reduce the danger of contact exposure to low voltage conductors. Test samples are proofC tested at 2200 volts (phase to ground). However, this voltage is not intended as an indication of the voltage at which the helmet protects the wearer. Class E (Electrical): Class E helmets are intended to reduce the danger of exposure to high voltage conductors. Test samples are proof-tested at 20,000 volts (phase to ground). However, this voltage is not intended as an indication of the voltage at which the helmet protects the wearer. Class C (Conductive): Class C helmets are not intended to provide protection against contact with electrical conductors.
* For further information see American National Standards Institute Standard Z89.1 for head protection available from American National Standards Institute, 11 W, 42nd, 13th floor, New York, NY 10036.
suspensions •
8 Point Ratchet: Ratchet headgear provides over 30 adjustments for comfortable fit without removing headgear. One-piece nylon headband with nylon, crown straps, with two crown height adjustments, providing the ultimate degree in comfort and impact protection. Fits sizes 61⁄2 to 8”.
•
6 Point Ratchet: Ratchet headgear provides over 30 adjustments for comfortable fit without removing headgear. One-piece nylon headband with nylon, crown straps, with two crown height adjustments, while providing an additional amount of impact protection. Fits sizes 61⁄2 to 8”.
•
4 Point Ratchet: Ratchet headgear provides over 30 adjustments for comfortable fit without removing headgear. Standard headgear with woven nylon straps. Fits sizes 61⁄2 to 8”.
• •
4 Point Pin-Lock: Standard headgear with woven nylon straps. Fits sizes 61⁄2 to 8”. 4 Point Plastic: Four-point molded plastic suspension system with cost effective protection. Fits sizes 61⁄2 to 8”.
ALLSAfe ™
Customer Service 1-800-428-8185
15
A DIVISION OF JACKSON SAFETY
neW
AnSi z89.1
for 2007
• Short bill design for greater • • • • •
upward vision Low nape strap, rain trough Comfortable nylon suspension options Terrycloth sweatband Universal slots for hearing, welding and visor accessories 4pt chin strap available
4 point Ratchet Suspension
4 Point Plastic Suspension
4 point Pin-Lock Suspension
COLOR OPTIONS
STD PACK
WHITE
BLUE
RED
HI-VIZ ORG
LIME
GRAY
ORANGE
GREEN
YELLOW
NEON PINK
SKY BLUE
BLACK
4PT RATCHET
12
3013362
3013363
3013364
3013365
3013366
3013367
3013368
3013369
3013370
3013372
3013371
3014571
4PT PIN-LOCK
12
3013374
3013375
3013376
3013377
3013378
3013379
3013380
3013381
3013382
3013384
3013383
3014572
4PT PLASTIC
12
3013409
3013412
3013413
3013416
3013410
3013417
3013414
3013415
3013411
3013420
3013418
3014709
for 2007
• Meets ANSI Z89.1 2003, Type 1, Class C • 12 cooling vents that provide the maximum in air circulation for comfort
• Short bill design allows for greater upward vision • Universal slots for hearing, welding and visor • •
4 point Ratchet Suspension
accessories Low nape strap, rain trough 4pt ratchet suspension with terrycloth sweatband
COLOR OPTIONS
STD PACK
WHITE
BLUE
RED
ORANGE
YELLOW
4PT RATCHET
12
3013392
3013393
3013394
3013398
3013400
Sentry iii™ CAp
AnSi z89.1
• Universal slots connect to hearing, welding and visor accessories
• 6pt nylon suspension with terrycloth sweatband • Ratchet suspension option for secure fit • Pin-Lock model has wide nape strap for secure fit
COLOR OPTIONS
6 point Ratchet Suspension
6 point Pin-Lock Suspension
STD PACK
WHITE
BLUE
RED
HI-VIZ ORG
LIME
GRAY
ORANGE
GREEN
SKY BLUE
YELLOW
12
3000064
3000072
3000075
3000085
3000204
3000067
3000078
3000070
3000206
3000061
14024
14055
14065
14101
15549
14033
14073
14047
15551
14011
12
3000063
3000071
3000074
3000084
3000203
3000066
3000077
3000069
3000205
3000060
12
14022
14053
14063
14099
15548
14031
14071
14045
15550
14009
6PT RATCHET
6PT PIN-LOCK
neW
AnSi z89.1
for 2007
• Full brim provides protection from UV rays on ears and back of neck
• Smooth dome look • Comfortable 8pt suspension with nylon web and
terrycloth sweatband that offers protection and comfort with a more secure fit
COLOR OPTIONS 8PT RATCHET
STD PACK 10
8 point Ratchet Suspension
WHITE
BLUE
RED
HI-VIZ ORG
ORANGE
GREEN
YELLOW
3014874
3014876
3014878
3014982
3014877
3014902
3014875
heAd & fACe proteCtion
neW
4-
heAd & fACe proteCtion ASC CAp • • • • •
AnSi z89.1
Slotted cap constructed of dielectric materials Excellent for general overhead protection Suspension adjusts to seven head sizes Cap is molded to contour the head and nape 4pt nylon ratchet suspension
COLOR OPTIONS
STD PACK
4PT RATCHET
12
4 point Ratchet Suspension
WHITE
BLUE
RED
GRAY
ORANGE
GREEN
YELLOW
3000190
3000195
3000192
3000193
3000194
3000196
3000191
15485
15490
15487
15488
15489
15491
15486
SC16 - fiberGLASS CAp • • • •
www.jacksonsafety.com
AnSi z89.1
Ideal for heat or overhead applications Universal slots for hearing, welding and visor accessories 4pt ratchet suspension 4pt chin strap available
COLOR OPTIONS
STD PACK
4 PT RATCHET
12
WHITE
BLUE
YELLOW
3001981
3001983
3001980
15343
15344
4 point Ratchet Suspension
bC100 buMp CAp
• Bump cap protects workers from hazards that can inflict painful bumps and lacerations
• NOT ANSI approved for impact • Visor attachment system enables the attachment of a
clear PETG visor to cap for increased facial protection
• Visor must be purchased separately COLOR OPTIONS
STD PACK
WHITE
BLUE
RED
HI-VIZ ORG
GRAY
ORANGE
GREEN
YELLOW
BC100
12
3001937
3001939
3001941
3012323
3001942
3001940
3001938
3001936
BC100 W/VISOR ATTCHT
12
3012332
3012334
3012336
3012338
3012339
3012337
3012335
3012333
WeStern outLAW™ hArd hAt • Stylish, comfortable and fits all head sizes • 4pt ratchet suspension
COLOR OPTIONS
STD PACK
4 PT RATCHET
4
WHITE
3010943
BLACK
3007313
AnSi z89.1
GRAY
3010945
TAN
3010944
S&W GRAY
S&W TAN
3013274
3013273
All hats and caps adjust to fit sizes 6-1/2 to 8. All caps supplied with cotton terrycloth sweatbands to wick away user’s perspiration for comfort.
ALLSAfe ™
Customer Service 1-800-428-8185
17
A DIVISION OF JACKSON SAFETY
™
CApS
AnSi z89.1
• Designs withstand temperature • • •
variances, humidity, and exposure to UV light for long-lasting wear Sentry III™ features universal slots to connect to hearing, welding and visor accessories and a 6 point ratchet suspension SC3 features a non-slotted design and 4 point ratchet suspension Available in ratchet suspension for secure fit
DESIGN OPTIONS
STD PACK
4 PT RATCHET
4
SC3 S&W Stars & Stripes
SC3 Mexican Flag
SC3 American Eagle
SC3 S&W Blue
AMERICAN FLAG
MEXICAN FLAG
HELLRAISER
AMERICAN EAGLE
INFERNO
S&W STARS & STRIPES
S&W BLUE
3000263
3000278
3004888
3000276
3011126
3013343
3013342
15718
15755
15743
DESIGN OPTIONS
STD PACK
RAZOR
GLORY
INFERNO
EXECUTIVE
6 PT RATCHET
4
3011945
3011946
3011947
3011948
™
Sentry III Inferno
Sentry III Razor
Sentry III Glory
• • • •
SC3 Inferno
hAtS
Sentry III Executive
AnSi z89.1
Full brim design offers more coverage 4pt nylon suspension with sweatband Ratchet holds cap in place for secure fit Low profile and lightweight SH3 HellRaiser
DESIGN OPTIONS
STD PACK
HELLRAISER
GLORY
4 PT RATCHET
4
3013040
3013039
repLACeMent pArtS
3013403 CHARGER REPLACEMENT 4PT RATCHET SUSPENSION 3013404 CHARGER REPLACEMENT 4PT PIN-LOCK SUSPENSION 3013405 CHARGER REPLACEMENT 4PT PLASTIC SUSPENSION 3000095 14431 SENTRY REPLACEMENT 6PT RATCHET SUSPENSION 3000199 15494 ASC/HEADTURNERS REPLACEMENT 4PT RATCHET SUSPENSION 3012340 BUMP CAP REPLACEMENT 4PT PINLOCK SUSPENSION
SH3 Glory 3000094 3000095 3014879 3005392 3005391 3000114 3009543 3000693
14429 14431
SENTRY REPLACEMENT 6PT PINLOCK SUSPENSION SENTRY REPLACEMENT 6PT RATCHET SUSPENSION BLOCKHEAD REPLACEMENT 8PT RATCHET SUSPENSION
22722 BC100 PETG VISOR 6X15.5X.040” 22721 BC100 PETG VISOR 8X15.5X.040” 14998 REPLACEMENT 4PT CHINSTRAP (25/BAG) 15060 BC100 REPLACEMENT SWEATBAND 44998 COOLMAX REPLACEMENT SWEATBAND (12/BAG)
heAd & fACe proteCtion
SC3 American Flag
SC3 HellRaiser
HEARING PROTECTION
www.jacksonsafety.com
NRR 24
NRR 24
Above-the-shoulder Protection system
• Complete forestry system includes orange Sentry III™ cap pin-lock, 24 NRR Muff, visor carrier and clear polycarbonate visor
3005132 3000077 3015091 3005410 3005401
14764 ats protection system 14071 orange sentry iii cap 22 nrr, vibe capmount 23291 visor carrier 22763 clear polycarbonate visor
Capmate™ • • • •
Lightweight and low profile Snug, comfortable fit Dielectric for protection against electrical hazards Hard hat not included
3005524 23463 capmate
VISOR OPTIONS
polycarbonate
etched stainless steel
SAFE 2 FACE PROTECTION FOR CAP MOUNTING
nylon mesh
safe 3 browguard/visor
• Dielectric visor-system that fits most safety caps • Bracket provides an excellent seal on most caps • Visors shaped to follow the contours of the face for
• A uniquely designed headgear that allows the use of
• Can be fitted to all Hellberg earmuffs or visor posts • Encapsulated stainless steel spring ensures that the
• Visors shaped to follow the contours of the face and
maximum protection
visor stays in the selected position
earmuffs
• High impact grade of ABS-plastic provide excellent protection
provide maximum protection
• Adjustable headband • Unique design allows earmuffs without interfering with the visor
• Easy to raise into rest position SAFE 2 & 3 CARRIERS & VISOR 3005401 3005415 3005413 3005410
22763 clear polycarbonate visor, 8 x 13 x .040 23296 nylon mesh visor 23294 steel mesh visor 23291 safe 2 visor carrier for hard hat mounting
3005411 23292 browguard with elastic strap 3005401 22763 safe 2 & 3 20cm visor - clear poly 8 x 13 x .040
NRR 21
Orion™
• L ow profile, lightweight • Ergonomic ear cups are individually • •
contoured to each ear for optimal fit Folds up for easy, compact storage Ultra-soft ear cushions for added comfort
NRR 25
original earmuff RBW suppressor ear muffs • • • •
conomical and durable E Spring steel headband Individual adjustable cups Available in foam-filled cushions or liquid filled for extra comfort
• Pivoting cup attachment for equal pressure distribution
• Contoured, padded headband • Rugged non-conductive plastic construction
• Easy slide cup adjustment • Smith & Wesson® logo imprinted on each cup
3010467 23528 NRR 21 ORION blue
3005516 3005517 3005522 3005521
23450 original earmuff red nrr 25 23451 original earmuff BLUE NRR 25 23459 LIQUID EARMUFF BLUE NRR 28 23458 LIQUID EARMUFF RED NRR 28
3011832 S&W SUPPRESSOR EAR MUFFS
ALLSAfe ™
Customer Service 1-800-428-8185
19
A DIVISION OF JACKSON SAFETY
Allsafe Services & Materials offers hearing protection and high-performance communication that’s both comfortable and stylish. Earmuffs are designed in styles that can dampen both intermittent or constant high-frequency noise, while still allowing lower-frequency sounds through. Our earmuffs are designed to offer a competitive noise reduction rating (NRR), a measurement that indicates how much hearing protection a unit offers. Also included in ASMC’s line of hearing protection are convenient, comfortable, reusable and disposable ear plugs, as well as versatile hearing bands designed for easy usage with safety glasses, helmets or other headgear.
WhAt LeveL of proteCtion do you need?
db
DECIBELS
hiGh
120
nrr 27-33
Rifle, Drill Hammer, Motor Race
110 Rock concert, Circular Saw, Electric Grinder
MediuM
100
nrr 25-26
90
LoW
80
TM
neW
onyx 23™ eArMuff • • • •
For low noise environments Lightweight, durable & economical Ultra-soft ear cushions for comfort and extended wear Ball & socket pivoting cup attachment providing optimum pressure distribution for maximum noise reduction
3015085
ONYX-23 HEADBAND EARMUFF
nrr 23
neW
onyx 26™ eArMuff • • • •
for 2007
For medium noise environments Lightweight, durable & economical Ultra-soft ear cushions for comfort and extended wear Ball & socket pivoting cup attachment providing optimum pressure distribution for maximum noise reduction
3015086
for 2007
ONYX-26 HEADBAND EARMUFF
nrr 26
heArinG proteCtion
nrr 21-24
Lawnmower, Industrial Work, Traffic Noise
heArinG proteCtion
www.jacksonsafety.com
• • •
HEARING PROTECTION
• • • •
New innovative design Adjustable, soft padded headband that adjusts to fit all head shapes and sizes Durable thermoplastic material retains it shape and pressure for consistent noise reduction Provides uniform headband pressure for a comfortable & secure fit Well sized inner-hole that provides plenty of room & comfort for the ear Headband models and a slim cap-mounted design that’s flexible and durable Dielectric product
VIBE 26
nrr 26
neW for 2007
neW
nrr 23
for 2007
VIBE 23
vibe 23 & 26 eArMuff • • • •
VIBE 28
23 NRR over-the-head; 22 NRR cap-mounted 26 NRR over-the-head; 25 NRR cap-mounted For low and medium noise environments Ideal for use with lawn mowers, power tools, light industrial work, road construction
3015087 3015089 3015091 3015092
VIBE VIBE VIBE VIBE
vibe CAp Mount Muff
• 29 NRR over-the-head; 28 NRR cap-mounted • For extremely noisy environments when maximum noise reduction is needed
• Ideal for use at race tracks, airports, shooting & hunting and for use with heavy equipment
3015090 3015093
23 HEADBAND, NRR 23 EARMUFF 26, HEADBAND, NRR 26 EARMUFF CAPMOUNT, NRR 22 EARMUFF CAPMOUNT, NRR 25 EARMUFF
nrr 28
VIBE 29 HEADBAND, NRR 29 EARMUFF VIBE CAPMOUNT, NRR 28 EARMUFF
fALCon™ With ACtive LiSteninG nrr 22
• • • • • • • • •
Amplifies low level sounds 360° micro-ear generates the most natural sound on the market Ultra-low profile cups allow for clearance when working in confined areas Ergonomically designed ear cups for maximum comfort and protection Operates on only two AAA batteries, providing up to 250 hours of active listening Ultra lightweight design - weighs only 10.5 oz Dual independent volume knobs for effortless control Custom padded headband for remarkable comfort Available in Smith and Wesson branded hearing protection
3011115 3012563
NRR 22 FALCON SMITH AND WESSON ACTIVE LISTENING HEARING PROTECTOR
teChniCAL dAtA
All product packaging provides attenuation data and NRR (Noise Reduction Rating) The following definitions are used in the measurement of noise: • Hertz - A unit of frequency equal to 1 cycle per second. • Mean attenuation - The average data derived from all tested subjects. • Standard deviation - The difference in attenuation between the tested subjects or how well the protection “fits” the individual. OSHA Approval Rules: 1. No agency approves hearing protection. 2. OSHA approves the hearing protector only in accordance to the noise level where it is used. A protector may be approved in one noisy work area but not another because of the level or type (frequency) of noise present. 3. For complete OSHA hearing protection recommendations, see OSHA Occupational Noise Exposure Standard 29 CFR 1910.95.
nrr 32
ALLSAfe ™
Customer Service 1-800-428-8185
21
A DIVISION OF JACKSON SAFETY
neW
AM/fM Stereo rAdio
for 2007
HEARING PROTECTION WITH A BUILT-IN AM/FM STEREO RADIO
Eliminates the “feel of isolation” and increase productivity by listening to your favorite music, news, weather and sports stations while maintaining protection from harmful noise. Ergonomic design for one-hand operation that’s “easy to operate, even with gloves on”. A single button for on/off and volume, one AM/FM switch and one for channel selection
nrr 25
• 25NRR over-the-head • Powered by 2, easy to change AA batteries that provide approximately 300 hours of use
• Frequency range: AM range is 540-1700 kHz and FM range: 88-108 MHz • High quality sound and reception • Moisture proof compartment for electronic assembly ideal for use in plants, forestry and yard work
• 12 month manufacturer warranty 3015094
THE HEARING PROTECTOR WITH BUILT-IN “ACTIVE LISTENING”
EPS (Electronic Protection System) earmuffs maximize user wearing time. The Frontline ensures that sound level never exceeds 82 dBA while amplifying normal conversation, warning shouts and alarms up to 16 dBA. You are protected against harmful noise while still communicating with co-workers and aware of your surroundings.
HEAD BAND
nrr 25
• Digital circuitry & controls with 1 control button that makes on/off adjustments • • • •
CAP MOUNT
teChniCAL dAtA
easy and extremely reliable Auxiliary input port for Walkman, MP3 player, CD-Player or 2-way radio Lifetime battery warranty and 12 month limited warranty on unit 4 hour power saving auto shut-off Auxiliary input port for Walkman, MP3 player, CD-Player or 2-way radio
FRONTLINE
FRONTLINE
Freq. Hz
125
250
Mean value
17.9 22.1 31.7 37.2 33.6 31.7 40.1 41.7 41.6 1.4
500 2.6
1k 2.3
2k
3.15k 4k
1.8
2.1
2.2
6.3k 2.6
8k 3.3
H
M
L
32
30
23
3000477 23483 NRR 27 FRONTLINE HEADBAND 3005530 23484 NRR 25 FRONTLINE CAPMOUNT
NRR CSA 27
A
ATTENUATION VALUE WITH ELECTRONICS SWITCHED OFF
reACt With ACtive LiSteninG & AM/fM Stereo rAdio React features a built-in AM/FM radio, active listening for communication with coworkers and the
nrr 27
ability to hear warning sounds and protection from harmful noise all in one unit. Also, a delay function prevents the hearing mode from being accidentally turned off.
• • • • •
HEAD BAND
nrr 25
Auxiliary input port for Walkman, MP3 player, CD-Player or 2-way radio 4 Hour power saving auto shut-off Sensitive microphones and full stereo give perfect sense of direction Selector switch for hearing, radio, and combination Digital circuitry
CAP MOUNT
REACT
3009660 23487 NRR 27 REACT HEADBAND 3005534 23488 NRR 25 REACT CAPMOUNT
teChniCAL dAtA REACT Freq. Hz
125
Mean value
16.7 19.0 30.8 36.9 36.6 37.4 39.5 43.3 43.6
1 std. deviation 2.4
250 2.0
500 2.2
1k 2.1
2k 3.0
3.15k 4k 2.4
2.6
6.3k 2.8
8k 2.5
H
M
L
36
28
20
NRR CSA 25
A
ATTENUATION VALUE WITH ELECTRONICS SWITCHED OFF
ACCeSSorieS 3005513 23447
HYGIENE KIT
3005526 23468 3V BATTERY CHARGER 3005529 23476 VEHICLE BATTERY CHARGER 3000471 23401 STORAGE CASE STORAGE CASE
heArinG proteCtion
frontLine With ACtive LiSteninG
nrr 27
1 std. deviation 2.1
JAMMER AM/FM HEADBAND, NRR 25
HEARING PROTECTION
www.jacksonsafety.com
REGIONAL COMMUNICATIONS VIA 2-WAY RADIO Regional provides crystal clear communication with high noise protection while using a 2-way radio. • B uilt-in electronics block harmful noise over 82 dB from reaching the ear • Lightweight and comfortable for increased wearing time • Select from models with receive-only ability, active listening, boom or throat
NRR 27
• • • • • •
NRR 25
microphone, voice activation (VOX) and push to talk (PTT) features Cap mounted options available Automatic muting by 6 dBA when you receive a call Electric microphone with noise suppression and amplifier Digital switch button for VOX/PTT Sensitive microphones and full stereo give perfect sense of direction Inlet for remote PTT and battery charge
REGIONAL 1.1
REGIONAL 2*
3005489 23398 NRR 25 RECEIVE ONLY- CAP MOUNT
3005450 23350 NRR 27 ACTIVE LISTENING - BOOM MIC VOX - HEADBAND 3005484 23391 NRR 25 ACTIVE LISTENING - BOOM MIC VOX - CAPMOUNT
REGIONAL 1.1 Receive Only Headband Weight: 10.635 oz. Cap Mount Weight: 11.88 oz. REGIONAL 1.1 Boom Mic Headband Weight: 12.50 oz. Cap Mount Weight: 13.59 oz.
REGIONAL 2 Active Listening Boom Mic Headband Weight: 15.295 oz. Cap Mount Weight: 11.88 oz. REGIONAL 2 Cap Mount Weight: 11.88 oz. * Rechargeable Battery Included
REGIONAL 1.0
3000468 23348 NRR 27 BOOM MIC - HEADBAND 3005483 23390 NRR 25 BOOM MIC - CAP MOUNT
LOCAL COMMUNICATIONS WITH A BUILT IN 2-WAY RADIO
Local provides crystal clear communication with high noise protection while using a built-in 2-way radio, which transmits/receives up to 2 miles.
• 4 62 MHZ - license free operation on free band • 14 Channels - provides your choice of operation with numerous groups or individuals
• Active Listening - amplifies warning sounds & signals and allows
communication in the vicinity without removing your hearing protection
• VOX (Voice activated) for hands free operation or PTT (Push-to-talk) transmission
ielectric - no exposed metal parts • D • Rechargeable Batteries - save up to $300 annually. One 8-hour charge
NRR 27 technical data
NRR 25
•
provides 40 hours of operation with an NiMH (environmentally friendly) battery Connections - connects to other 2-way radios and CD/Walkman radios LOCAL 3000475 23456 NRR 27 2 WAY - HEADBAND 3000476 23457 NRR 25 2 WAY - CAPMOUNT
LOCAL Freq. Hz
125 250 500
1k
2k 3.15k 4k
6.3k
8k
Mean value 17.9 22.1 31.7 37.2 33.6 31.7 40.1 41.7 41.6 1 std. deviation 2.1
1.4
2.6
2.3
1.8
2.1
2.2
2.6
3.3
H
M
L
32
30
23
NRR CSA 27
A
ATTENUATION VALUE WITH ELECTRONICS SWITCHED OFF
accessories 3005513 23447 3005526 3005529 3000471 3000466
HYGIENE KIT
23468 3V BATTERY CHARGER 23476 VEHICLE BATTERY CHARGER 23401 STORAGE CASE 23327 FRESH KIT
LOCAL 3005520 23454 NRR 27 RECEIVE ONLY - HEADBAND 3000474 23455 NRR 25 RECEIVE ONLY - CAPMOUNT
ALLSAfe ™
Customer Service 1-800-428-8185
A DIVISION OF JACKSON SAFETY
nrr 32
Soft foAM eAr pLuGS • • • • • •
Soft foam ear plugs offer superior comfort and outstanding protection 200 pair dispenser - individually bagged Tapered shape for easy insertion Disposable Fits almost any ear canal Contains latex material
3013911
S&W FOAM EAR PLUGS (200/BOX)
red-e-fit pLuGS
Soft foam conforms to the ear Tapered shape for easy insertion Comfortable design for extended wear Individually wrapped, one pair per bag Contains latex material
3004904 23529 REDEFIT CORDED (100/BOX) 3005542 23530 REDEFIT UNCORDED (200/BOX)
nrr 25
quik-fit® Corded eAr pLuGS
• Triple-flange design offers fast, comfortable insertion and effective noise prevention
• Flexible material for a superior seal • Corded for loss prevention 3011831
• Fun-colored SparkPlugs™ spark • • •
up hearing protection programs Soft, low pressure foam for extra comfort SparkPlugs™ is a registered trademark of Moldex Contains latex material
3005985 87038 3001732 87039
UNCORDED, 200 PER BOX CORDED, 100 PER BOX
S&W QUIK-FIT CORDED EAR PLUGS
nrr 23
nrr 33
SpArk pLuGS™
nrr 22
heArSAfe™ t230
• 1/2 oz. dielectric band • Silicone plugs are comfortable and • •
mold quickly to the ear canal for custom fit (individually bagged) Low profile band does not interfere with hardhats or spectacles Value and durability, compared to competitive “name-brands”
3000460 23268 HEARSAFE T230
nrr 26
roCket™
• Easy grip handle lets them easily slip into the ear
• Air cushioned for comfort • Latex-free • Rocket™ is a registered trade mark of Moldex
3005986 87040 3005987 87041
UNCORDED, 50 PER BOX CORDED, 50 PER BOX
heArinG proteCtion
nrr 32 • • • • •
23
reSpirAtory proteCtion
www.jacksonsafety.com
Our product line consists of disposable respirators, fully assembled respirators, replacement cartridges and filters and welding respirators. They provide protection from hot, humid, dusty environments to filtering out hazards such as organic vapors, paint spray, pesticides, and multi-gas vapors. NIOSH’s 42CFR84 standard for particulate respirators provides for filter efficiency and filter degradation. The efficiency levels are 95%, 99% and 99.97%, which correspond to the numerical designation 95, 99 and 100. Selection of filter efficiency depends on how much filter leakage can be accepted. Resistance to filter degradation is labeled N, R and P. N means the filter is not resistant to oil. R means the filter is oil resistant and the P means the filter is oil-proof. Selection of an N, R or P series filter depends on the presence or absence of oil particles. For environments that contain oils, N, R or P is appropriate. If P is appropriate. If the environment contains oils (or you are not sure), then an R or P filter should be used.
GERSON
one-Step SerieS hALf MASk
• Ready to use. Complete unit, includes cartridges. Simplifies your inventory
®
requirements
Progressive With Purpose
• Reduces the record keeping necessary for OSHA compliance regarding maintenance and cleaning
• Available in two sizes: Medium, and Large • Ideal for paint and cleaning with chemicals • Cradle suspension and easy to adjust head straps facilitate a proper & comfortable fit.
G95 P95 PARTICULATE FILTER
• Provides low profile, swept back design for a greater vision and normal use of glasses and goggles
p95 pArtiCuLAte fiLter
• Fiberglass-free filters are fully compatible with all Gerson Signature Series Cartridge respirators
• Effective against all particulate aerosols including oil. 3010964 3010965
172 FILTER RETAINER
8211 ORGANIC VAPOR/P95 FILTER MEDIUM 8311 ORGANIC VAPOR/P95 FILTER, LARGE
REPLACEMENTS PARTS
3010966 3010967
G95 P95 PARTICULATE FILTER 172 FILTER RETAINER
SiGnAture SerieS duAL CArtridGe hALf MASk
• Soft, lightweight electrometric face piece, cradle suspension and easyXP100 PANCAKE PARTICULATE FILTER
adjust head straps facilitate proper and comfortable fit.
• Low profile, swept-back design provides greater field of vision and allows normal use of glasses or goggles.
• Each face piece is packaged with the patented hygienic Form-guard® that helps to maintain the shape and cleanliness of the face piece after use
p100 pAnCAke fiLterS • • • •
Low profile fits under welding helmet Low breathing resistance Lightweight but extra durable Improved, easy-to-use, twist-on mounting
G70 PARTICULATE FILTER
3010957 9200 RESPIRATOR FACEPIECE, MEDIUM 3010958 9300 RESPIRATOR FACEPIECE, LARGE
SiGnAture SerieS GAS & vApor CArtridGeS:
P100 FILTERS
3010963 P100 PANCAKE PARTICULATE FILTER XP100 3010962 P100 PARTICULATE FILTER G70
• Complete line of organic vapor and acid gas cartridges:
orGAniC vApor CArtridGe
ACid GAS CArtridGe
3010959 G01 ORGANIC VAPOR CARTRIDGE
3010960 G02 ACID GAS CARTRIDGE
orGAniC vApor/ACid GAS CArt 3010961 G03 ORGANIC VAPOR/ACID GAS CARTRIDGE
diSpoSAbLe reSpirAtor
n95 diSpoSAbLe reSpirAtor
3005846 28076 MEDIUM DISPOSABLE RESPIRATOR, NOT NIOSH 3005847 28082 LARGE DISPOSABLE RESPIRATOR, NOT NIOSH
3000559 28083 DISPOSABLE
• Not NIOSH approved • Adjustable metal nosepiece. • Lightweight fiber for comfort
• Adjustable metal nosepiece, ideal for dusty environments • Lightweight for comfort and extended wear RESPIRATOR
ALLSAFE ™
Customer Service 1-800-428-8185
1730 N95 Particulate mask • Features durable, latex-free • •
ultrasonically welded head straps to withstand tough use Adjustable contoured aluminum nose piece and a soft open cell foam nose cushion helps ensure proper fit Inner coating repels moisture that allows workers to breathe easier
A DIVISION OF JACKSON SAFETY
1740 n95 particulate w/valve 2737 n95 Particulate w/ Nose • A new valve design that helps cushion •
provide workers a cooler and more comfortable experience Easier breathing and less fatigue for your workers means better compliance
3010947 1740 N95 Particulate Respirator w/ Valve
• Low profile design and sure-
•
fit triangular nose cushion of soft, closed cell foam provides exceptional worker comfort Strong, stapled head-straps for long life and comfort
3010951 2737 N95 Particulate Respir w/Nose Cush
2747 N95 Particulate w/valve 2940 p95 Particulate mask 2130-B n95 flat fold • NIOSH P95 approved for all oil and Particulate Mask & Nose cushion solid particulates • Low profile design and sure• •
fit triangular nose cushion of soft, closed cell foam provides exceptional worker comfort Strong, stapled head-straps for long life and comfort Low pressure drop exhalation valve for easy breathing and increased worker comfort
urable, ultrasonically welded • Low pressure drop exhalation valve • D non-latex head for easier breathing and cooler feel • Moisture-resistant for durability and • bands Lowest longer life
3010952 2747 N95 Particulate Resp w/ Valve, Cush
3010956 2940 p95 Particulate Respirator w/ Valve
2767 N95 Particulate welding mask
1840 R95 Particulate WELDING Mask
• Special depth filter provides a • •
high loading capacity for metal fumes without increasing breathing resistance New low pressure drop exhalation valve for easy breathing and increased worker comfort Exclusive comfort cushioned foam nose seal
3010948 2767 N95 Particulate Welding Resp
breathing resistance in class
• Flame retardant outer shell
• Special depth filter provides high • • •
loading capacity for metal fumes without increasing breathing resistance Heavy duty adjustable head-straps and soft, closed cell foam face seal cushion offer increased comfort and fit Flame retardant outer shell May be used in both oil and non-oil atmospheres
3010949 1840 R95 Particulate Respirator
3010953 N95 flat fold particulate mask
2040 n100 particulate mask • For exposure to OSHA specific
• •
particulates, (lead, cadmium, arsenic, methylenedianilne (MDA), plus metal fumes from welding, brazing and metal cutting Low pressure drop exhalation valve assures easy breathing and a cool, comfortable experience Flame retardant outer shell
3010950 2040 N100 Particulate Respirator mask
RE S PIR A TORY PROTE C TION
3010941 1730 N95 Particulate Respirator
25
SEASONAL
www.jacksonsafety.com
Drybrow® sweatbands
Icy Blue Ones™ Cooling Products
Keep cool and prevent perspiration from running into your eyes in hot, humid conditions with Allsafe Services & Materials specialized sweatbands.
Dip in cold water or chill in freezer for ultimate all day cooling relief.
AA-100 DB-801 AA-102
aa-100
• Packaged 25/bag;
individually sleeved for increased shelf life
aa-101
• Packaged 100/bag;
not individual sleeved
aa-103
• Packaged 25/bag;
DB-801
• Economy price range • Packaged 100/bag
IB-902F
• Headband style keeps
DB-803
• Packaged 25/bag
AA-102
• Deluxe clip-on • Packaged 25/bag
• •
brow cool and keeps sweat from dripping into eyes Wraps around brow with convenient hook and loop fasteners 27.5” long, 2.5” wide
IB-901C
• Bandanna style • Fast, cool relief from heat • Tie around neck or forehead
not individual sleeved
3005334 22008 AA-100 3005335 22009 AA-101 3005337 22011 AA-103
3005338 22013 DB-801 3009557 22017 DB-803 3005336 22010 AA-102
3009560 22041 IB-902E
3009559 22038 IB901F - American flag 3005339 22039 IB901E - economy blue 3009561 22046 IB901C - bandanNA
BARGARD® protector caps
DISC-10
a-5
• Fits rebar #3-7, 3/8” to 7/8” • Fits rebar 3/8” to 3/4” • • • •
diameter Lightweight and chemical resistant Stands up to weather and temperature conditions Bright orange for visibility Standard package 100
3011839
disc-10, rebar cap
• •
diameter Also fits inside 1” ID pipe Standard package 200
3005547 23704 a-5, rebar cap
a-10
• Fits rebar 3/8” to 1-1/4” • •
diameter Also fits inside 1-3/4” ID pipe Standard package 100 & 300
3005543 23700 a-10, rebar cap
a-20
• Fits rebar 1” to 2-1/4” diameter
• Standard package 100
3005545 23702 a-20, lime rebar cap 3005546 23703 a-20, white rebar cap
WARNING – BARGARD® caps are not designed or intended to provide impact or impalement protection. They are not a substitute for covering vertical reinforcing steel with timber, as recommended by OSHA, and are not recommended for use when protection from falls is required. For additional information on acceptable methods of guarding against impact or impalement, consult OSHA CFR TITLE 29, PART 19120, ANSI A10.91983, and your state regulations for specific requirements. WARNING – DISC-10 BARGARD® PROTECTOR CAPS DISC-10 meets the testing requirements of CAL OSHA Construction Safety Orders Section 1712 on impalement protection from concrete reinforcing bars (#3-9, 3/8 - 1-1/4") for heights up to 7-1/2" and 250 lbs. (CAL OSHA Approval Code #C-1716-AG) when properly installed. Failure to properly install DISC-10 will significantly decrease any impalement protection that may otherwise be provided by the DISC-10 and may result in injury. If positioning fins are missing or damaged, the DISC-10 must be discarded. For information on the requirements of guarding against impalement, consult OSHA CFR Title 29, Sect. 1928.701 et. seq. For additional information on fall protection, consult OSHA CFR Title 29, Part 1926 - Safety and Health Regulations for Construction, Subpart M - Fall Protection, and your state regulations for specific requirements.
ALLSAFE ™
Customer Service 1-800-428-8185
27
A DIVISION OF JACKSON SAFETY
Winter liners
Through cold and chill, snow, rain and sleet, Allsafe Services & Materials offers the industry's most comprehensive line of thermal winterwear to give workers full protection from the elements. Our cap liners are made from the most technologically advanced fabrics that combine the best of performance features with a number of comfort options.
TEMPERATURE RANGE CODING
45° to 32°F or 8° to 0°C
32° to 0°F or 0° to -20°C
0° to -20°F or -20° to -28°C
The above suggested ranges are to assist in choosing an appropriate liner for various climates.
• • • • •
Lightweight protection 100% cotton Napped flannel interior Liner color may vary due to material availability Standard package 12
3000438 22251 165 winter liner
200
225 Plus
• 100% cotton, denim outer • Blue quilted nylon shell • •
shell with black fastener straps Red heavyweight fleece lining Standard package 12
3000440 22294 200 winter liner
305 TSL
• Thinsulate® inner panels and red heavyweight fleece lining
• Full head and neck coverage with extra-wide wrapped collar
• Shoulder-length liner can be tucked
3000442 22298 225 plus wint liner
layered, heavy knit spun polyester
• Top section is flame retardant
black fastener
•
3000443 22383 305 TSL winter liner
outer shell
• Red heavy weight fleece lining
3005348 22295 250m winter liner
375
• Detachable bottom section is double • Long nape offered for extra neck
•
• Standard package 3
• L onger nape covers neck • 100% cotton, denim • Standard package 12
325 Ultra
into jacket
• 100% cotton, denim exterior with
• •
with fastener straps Three layers of thick foam Standard package 12
250M
treated; bottom section does not support combustion Red heavyweight fleece inner lining of top section Standard package 3
3000439 22293 325 ultra winter liner
coverage from wind
• 100% cotton, denim twill shell with black fastener strap
• Thick, sherpa lining for maximum warmth
• Standard package 3
3005349 22300 375 winter liner
S E A S ON A L
165
SEASONAL
400
• Full head and neck • • •
coverage with extra-long nape and wrap-around collar 100% cotton, denim exterior Thick, sherpa lining for maximum warmth Standard package 3
www.jacksonsafety.com
440 Max with mouth piece • •
comfort and warmth
forehead coverage and wide chin strap closure Blue quilted nylon with extra-heavy foam, black fastener, detachable mouthpiece Three layers of thick foam with sherpa lining Standard package 3
3005351 22308 440 winter liner
• Silver with black trim and fastener straps
• Standard package 12
• 50/50 Nomex IIIA and Proban • •
®
®
cotton liner with longer nape for neck and lower forehead coverage with leather fastener Flame retardant Standard package 6
3005354 22329 650 NPR winter liner
695 NPR
3005347 22278 wind jammer ii
ex ®
®
full head and neck liner with wide wrap-around collar with leather fastener Flame retardant Standard package 3
3005355 22337 695 NPR winter
around design for extra warmth and snug fit Silver with black fastener straps and elastic border stitching Standard package 6
3005346 22277 wind jammer IV
TM
• 50/50 Nomex and Proban cotton • •
• •
L I N E R S
650 NPR
wind jammer IV
• Heavy-duty for lightweight • Long nape and wrap-
• Extra-long nape, lower
• 3000441 22297 400 winter liner
wind jammer II
Arctic 2-In-1 Sport™
• Great coverage reduces drafting • Top section: fleece with elastic •
around face; bottom section: spun polyester Standard package 3
3004789 22311 3004788 22316
ROYAL BLUE/RED ARcTIC 2-IN-1 SPORT SILVER/NAVY BLUE ARTIC 2-IN-1 SPORT
IMPORTANT All models are flame retardant treated unless otherwise noted. Flame retardant treated models meet the Federal NFPA701 Standard. Flame resistance is the fabric’s ability to self extinguish when exposed to flame or thermal ignition sources. Flame resistance is meaningful only when applied to specific tests used to measure the characteristic. 16 CFR 1610, Class I: “Textiles meeting these requirements are generally accepted by the trade as having no unusual burning characteristics.” Windgard, Windjammer™ II, IV, 2-N-1 Sport meet 16 CFR 1610, Class I
ALLSAFE ™
Customer Service 1-800-428-8185
29
A DIVISION OF JACKSON SAFETY
Nomex® Hood • • • • • • •
100% Nomex knitted hood Double-layered with 100% Nomex for extra protection around the face Full head & neck coverage with extra-wide collar Shoulder-length collar can be tucked into jacket Can be worn under a hard hat or welding helmet as protection against flame and electrical arcs Flame resistant Standard package 12
3000444 22402 nomex hood
SMITH & WESSON SKULL CAP
• Washable flame retardant fabric • Air cushioned, sweat absorbent insert acts as built-in sweatband • Athletic mesh lining improves the sweat evaporation process, keeping your head cooler
• Reusable • One size fits all with tie closer for a secure fit 3013052
BLUE SKULL CAP
INNER
96 **Cal/Cm2/Second
76 **Cal/Cm2/Second
* The length of brittle residue when material is exposed to thermal energy. ** CAL=Calorie=Measure of heat energy. Flash-Tex™ liners will assist in complying with OSHA 1910.269.
FLAME RESISTANT Flash-Tex
™
650 NPR 695 NPR
LAUNDERING DATA
OUTER SHELL
INNER SHELL
Nomex® inherently flame resistant NFPA 1975
Propan durable flame resistant NFPA 1975 ®
OUTER SHELL
FR properties last lifetime
INNER SHELL
Retains FR properties up to 25 industrial washes and 50 domestic washes
*CHAR LENGTH OUTER
2.4
INNER
3.5
Note: Above data obtained from material manufacturers’ testing. For additional technical information, contact Customer Service.
™ Windgard Keeps wind out, traps warmth and prevents moisture build-up. Knitted flame resistant treated spun polyester.
AA-7
AA-8
• Cap style 3005341 22207 3000434 22201 3000435 22204
• H at style • For 360° brim hats RED NAVY BLUE ORANGE
3000436 22221
RED
AA-9
• Full-face and neck cap and hat style
3005342 22225 3000437 22223
RED NAVY BLUE
S E A S ON A L
ARC ENERGY EXPOSURES OUTER
SAFETY APPAREL
www.jacksonsafety.com
Road Warrior ANSI Class 3
While the type of garment and size of the wearer dictate the area of clothing, it is the intention of this standard for Performance Class 3 to offer greater visibility to the wearer in both complex backgrounds and through a full range of body movements. Additionally, visibility is enhanced beyond Performance Class 2 by the enhancement of background and reflective materials to the arms and/or legs. Regardless of the area of materials used, a sleeveless garment or vest alone shall not be considered Performance Class 3. The retroreflective or combined-performance materials incorporated into the garment shall not be less than 50mm (1.97 in .) wide for Performance Class 3.
DELUXE STYLES
DELUXE MESH
3009981 3009982 3009983 3009984 3009985 3009987 3009988 3009989 3009990 3009991
• 4 pocket design for increased carrying space • Rugged color matched front zipper closure • Mesh option includes CoolDRY™ fabric which is ultra-lightweight, breathable, and removes moisture
• 360° visibility with high intensity tape • Machine washable
9131202 Orange CL 3 w/ Silver Hi-Int Refl.-L 9131203 Orange CL 3 w/ Silver Hi-Int Refl.-XL 9131204 Orange CL 3 w/ Silver Hi-Int Refl.-2XL 9131205 Orange CL 3 w/ Silver Hi-Int Refl.-3XL 9131206 Orange CL 3 w/ Silver Hi-Int Refl.-4XL 9131212 Lime CL 3 w/ Silver Hi-Int Refl.-L 9131213 Lime CL 3 w/ Silver Hi-Int Refl.-XL 9131214 Lime CL 3 w/ Silver Hi-Int Refl.-2XL 9131215 Lime CL 3 w/ Silver Hi-Int Refl.-3XL 9131216 Lime CL 3 w/ Silver Hi-Int Refl.-4XL
DELUXE SOLID
3009957 3009958 3009959 3009960 3009961
reflectivity
9131002 Orange CL 3 w/ Lime Hi-Int Refl.-L 9131003 Orange CL 3 w/ Lime Hi-Int Refl.-XL 9131004 Orange CL 3 w/ Lime Hi-Int Refl.-2XL 9131005 Orange CL 3 w/ Lime Hi-Int Refl.-3XL 9131006 Orange CL 3 w/ Lime Hi-Int Refl.-4XL
STANDARD MESH
3009993 3009994 3009995 3009996 3009997 3009999 3010000 3010001 3010002 3010003
9131302 Orange CL 3 w/ Silver Refl.-L 9131303 Orange CL 3 w/ Silver Refl.-XL 9131304 Orange CL 3 w/ Silver Refl.-2XL 9131305 Orange CL 3 w/ Silver Refl.-3XL 9131306 Orange CL 3 w/ Silver Refl.-4XL 9131312 Lime CL 3 w/ Silver Refl.-L 9131313 Lime CL 3 w/ Silver Refl.-XL 9131314 Lime CL 3 w/ Silver Refl.-2XL 9131315 Lime CL 3 w/ Silver Refl.-3xL 9131316 Lime CL 3 w/ Silver Refl.-4XL
STANDARD SOLID
3009969 3009970 3009971 3009972 3009973 3009975 3009976 3009977 3009978 3009979
CL3 DELUXE MESH ORANGE CL3 STANDARD MESH ORANGE
STANDARD STYLES
• Velcro closure • Mesh option includes CoolDRY™ fabric which is ultra-lightweight, breathable, and removes moisture
9131102 Orange CL 3 w/ Silver Refl.-L 9131103 Orange CL 3 w/ Silver Refl.-XL 9131104 Orange CL 3 w/ Silver Refl.-2XL 9131105 Orange CL 3 w/ Silver Refl.-3XL 9131106 Orange CL 3 w/ Silver Refl.-4XL 9131112 Lime CL 3 w/ Silver Refl.-L 9131113 Lime CL 3 w/ Silver Refl.-XL 9131114 Lime CL 3 w/ Silver Refl.-2XL 9131115 Lime CL 3 w/ Silver Refl.-3XL 9131116 Lime CL 3 w/ Silver Refl.-4XL
• 360° visibility with high intensity tape • Machine washable
SCREEN PRINTING FOR APPAREL Part #
Description
Printing Dimensions (back)
Dimensions (front)
Comments
3009834
ORANGE VEST CL1 WHITE HI REFL-L DELUXE
11.5”W X 10”H
3 x 3 right side only
Back width increases 1/2” for each size up
3009865
LIME VEST CL1 SILVER REFL-LG STANDARD
13.5”W x 10”H
3x3
Back width increases 1/2” for each size up
3009871
ORANGE MESH VEST CL1 SILV REFL-LG DELUXE
11”W x 10”H
3 x 3 right side only
Back width increases 1/2” for each size up
3009889
LIME MESH VEST CL1 SILV REFL-LG STANDARD
12”W X 10”H
3x3
Back width increases 1/2” for each size up
3009895
ORANGE VEST CL2 LIME HI REFL-L DELUXE
11.5”W X 10”H
3 x 3 right side only
Back width increases 1/2” for each size up
3009931
ORANGE MESH VEST CL2 SILV REFL-LG DELUXE
11”W x 10”H
3 x 3 right side only
Back width increases 1/2” for each size up
3009951
LIME MESH VEST CL2 SILVER REFL-LG STD
11”W x 10”H
3x3
Back width increases 1/2” for each size up
3009987
LIME MESH VEST CL3 SILV REFL-LG DELUXE
12”W X 10”H
3 x 3 right side only
Back width increases 1/2” for each size up
3009975
LIME VEST CL3 SILVER REFL-LG STANDARD
12”W X 10”H
3x3
Back width increases 1/2” for each size up
3009999
LIME MESH VEST CL3 SILV REFL-LG STANDARD
15”W x 10”H
3x3
Back width increases 1/2” for each size up
3009963
LIME VEST CL3 LIME HI REFL-LG DELUXE
14”W x 10”H
3 x 3 right side only
Back width increases 1/2” for each size up
3001746
VEST ESK ORANGE W/LIME REFLECTIVE LG
7.5”W x 7.5”H
3x3
Back width increases 1/2” for each size up
3008157
VEST TWV LIM W/1-3/8 RED-ORG L
8”W x 8”H
3x3
Back width increases 1/2” for each size up
3009919
VEST CL2 ORG/SLV STD LG
13.5”W x 10”H
3x3
Back width increases 1/2” for each size up
3012947
T-SHIRT CL2 LIM/SLV LG SHORT SLEEVE
12”W X 10”H
7x7
Back width increases 1/2” for each size up
special features
CoolDRY™ Moisture Management: CoolDRY™ works through advanced wicking technology that transports moisture away from skin to the fabric’s outer surface where it quickly dries, regulating body temperature. ThermaGARD works through a series of brushed fabrics which use air pockets to trap heat and retain energy, while wicking moisture away from the body. All Winterwear products are Breathable, Waterproof and Windproof by use of micro-porous coatings, letting out body moisture, while defending you from the elements. Waterproof flexible tape is heat sealed over seams to ensure waterproof capability. HydroGARD consists of polyester construction tightly woven, lightweight, breathable and waterproof. It gets wet, you stay dry.
SMC ™
Customer Service 1-800-428-8185
31
A DIVISION OF JACKSON SAFETY
Roadwarrior Performance Class 2 provides superior visibility for wearers by the additional coverage of the torso, and is more conspicuous than Performance Class 1. For Performance Class 2, the retroreflective or combined-performance materials incorporated into the garment shall not be less than 35mm (1.38 in.) wide.
ANSI 2-tone vest
DELUXE
• 3 Pockets; 2 inside & 1 outside along with shoulder mic/antenna tab • 4-Inch split fluorescent trim with 2-inch wide super bright silver retroreflective tape
• Adjustable panel-belt system for tailored fit over bulky clothes • 2 sizes M-XL and 2X-5X • Soft, lightweight fluorescent polyester fabric and machine washable
3012873 3012874 3012877 3012878 3012870 3012872 3012875 3012876
2-Tone 2-Tone 2-Tone 2-Tone 2-Tone 2-Tone 2-Tone 2-Tone
Lime Solid Deluxe Vest M-XL Lime Solid Deluxe Vest 2X-5X Lime Mesh Deluxe Vest M-XL Lime Mesh Deluxe Vest 2X-5X Orange Solid Deluxe Vest M-XL Orange Solid Deluxe Vest 2X-5X Orange Mesh Deluxe Vest M-XL Orange Mesh Deluxe Vest 2X-5X
STANDARD
3012881 3012882 3012885 3012886 3012879 3012880 3012883
2-Tone 2-Tone 2-Tone 2-Tone 2-Tone 2-Tone 2-Tone
Lime Solid Standard Vest M-XL Lime Solid Standard Vest 2X-5X Lime Mesh Standard Vest M-XL Lime Mesh Standard Vest 2X-5X Orange Solid Standard Vest M-XL Orange Solid Standard Vest 2X-5X Orange Mesh Standard Vest M-XL
CoolDRY™ 100% polyester moisture management fabric wicks away excess moisture
DELUXE STYLES
DELUXE MESH
3009931 3009932 3009933 3009934 3009935 3009937 3009938 3009939 3009940 3009941
• 4 Pocket design for increased carrying space • Rugged color matched front zipper closure • Mesh option includes CoolDRY™ fabric which is
ultra-lightweight, breathable, and removes moisture
• 360° visibility with high intensity tape • Machine washable
9121202 Orange CL 2 w/ Silver Hi-Int Refl.-L 9121203 Orange CL 2 w/ Silver Hi-Int Refl.-XL 9121204 Orange CL 2 w/ Silver Hi-Int Refl.-2XL 9121205 Orange CL 2 w/ Silver Hi-Int Refl.-3XL 9121206 Orange CL 2 w/ Silver Hi-Int Refl.-4XL 9121212 Lime CL 2 w/ Silver Hi-Int Refl.-L 9121213 Lime CL 2 w/ Silver Hi-Int Refl.-XL 9121214 Lime CL 2 w/ Silver Hi-Int Refl.-2XL 9121215 Lime CL 2 w/ Silver Hi-Int Refl.-3XL 9121216 Lime CL 2 w/ Silver Hi-Int Refl.-4XL
DELUXE SOLID
reflectivity
3009895 3009896 3009897 3009898 3009899 3009901 3009902 3009903 3009904 3009905 3009907 3009908 3009909 3009910 3009911
9121002 Orange CL 2 w/ Lime Hi-Int Refl.-L 9121003 Orange CL 2 w/ Lime Hi-Int Refl.-XL 9121004 Orange CL 2 w/ Lime Hi-Int Refl.-2XL 9121005 Orange CL 2 w/ Lime Hi-Int Refl.-3XL 9121006 Orange CL 2 w/ Lime Hi-Int Refl.-4XL 9121012 Lime CL 2 w/ Orange Hi-Int Refl.-L 9121013 Lime CL 2 w/ Orange Hi-Int Refl.-XL 9121014 Lime CL 2 w/ Orange Hi-Int Refl.-2XL 9121015 Lime CL 2 w/ Orange Hi-Int Refl.-3XL 9121016 Lime CL 2 w/ Orange Hi-Int Refl.-4XL 9121022 Lime CL 2 w/ White Hi-Int Refl.-L 9121023 Lime CL 2 w/ White Hi-Int Refl.-XL 9121024 Lime CL 2 w/ White Hi-Int Refl.-2XL 9121025 Lime CL 2 w/ White Hi-Int Refl.-3XL 9121026 Lime CL 2 w/ White Hi-Int Refl.-4XL
STANDARD MESH
3009945 3009946 3009947 3009948 3009949 3009951 3009952 3009953 3009954 3009955
CL2 DELUXE MESH LIME
9121302 Orange CL 2 w/ Silver Hi-Int Refl.-L 9121303 Orange CL 2 w/ Silver Hi-Int Refl.-XL 9121304 Orange CL 2 w/ Silver Hi-Int Refl.-2XL 9121305 Orange CL 2 w/ Silver Hi-Int Refl.-3XL 9121306 Orange CL 2 w/ Silver Hi-Int Refl.-4XL 9121312 Lime CL 2 w/ Silver Hi-Int Refl.-L 9121313 Lime CL 2 w/ Silver Hi-Int Refl.-XL 9121314 Lime CL 2 w/ Silver Hi-Int Refl.-2XL 9121315 Lime CL 2 w/ Silver Hi-Int Refl.-3XL 9121316 Lime CL 2 w/ Silver Hi-Int Refl.-4XL
STANDARD SOLID
CL2 STANDARD SOLID ORANGE
STANDARD STYLES
• Velcro closure • Mesh option includes CoolDRY™ fabric which is ultra lightweight, breathable, and removes moisture
• 360° visibility with high intensity tape • Machine washable
3009919 3009920 3009921 3009922 3009923 3009925 3009926 3009927 3009928 3009929
9121102 Orange CL 2 w/ Silver Refl.-L 9121103 Orange CL 2 w/ Silver Refl.-XL 9121104 Orange CL 2 w/ Silver Refl.-2XL 9121105 Orange CL 2 w/ Silver Refl.-3XL 9121106 Orange CL 2 w/ Silver Refl.-4XL 9121112 Lime CL 2 w/ Silver Refl.-L 9121113 Lime CL 2 w/ Silver Refl.-XL 9121114 Lime CL 2 w/ Silver Refl.-2XL 9121115 Lime CL 2 w/ Silver Refl.-3XL 9121116 Lime CL 2 w/ Silver Refl.-4XL
S A FETY A PP A RE L
STANDARD ORANGE 2-TONE
DELUXE LIME 2-TONE
SAFETY APPAREL
www.jacksonsafety.com
Road Warrior ANSI Class 1 provides required material to differentiate the wearer from the work environment. For Performance Class 1, where retroreflective material is used in conjunction with specified background material, the bands of retroreflective material incorporated into the garment shall not be less than 25mm (0.98 in.) wide.
DELUXE STYLES
DELUXE MESH
• 4 Pocket design for increased carrying space • Rugged color matched front zipper closure • Mesh option includes CoolDRY™ fabric which is ultralightweight, breathable, and removes moisture
• 360° visibility with high intensity tape • Machine washable • CoolDRY™ 100% polyester moisture management fabric wicks away excess moisture
reflectivity
3009871 3009872 3009873 3009874 3009875 3009877 3009878 3009879 3009880 3009881
9111202 Orange CL 1 w/ Silver Hi-Int Refl.-L 9111203 Orange CL 1 w/ Silver Hi-Int Refl.-XL 9111204 Orange CL 1 w/ Silver Hi-Int Refl.-2XL 9111205 Orange CL 1 w/ Silver Hi-Int Refl.-3XL 9111206 Orange CL 1 w/ Silver Hi-Int Refl.-4XL 9111212 Lime CL 1 w/ Silver Hi-Int Refl.-L 9111213 Lime CL 1 w/ Silver Hi-Int Refl.-XL 9111214 Lime CL 1 w/ Silver Hi-Int Refl.-2XL 9111215 Lime CL 1 w/ Silver Hi-Int Refl.-3XL 9111216 Lime CL 1 w/ Silver Hi-Int Refl.-4XL
DELUXE SOLID
3009834 3009835 3009836 3009837 3009838 3009840 3009841 3009842 3009843 3009844 3009846 3009847 3009848 3009849 3009850
9111002 Orange CL 1 w/ White Hi-Int Refl.-L 9111003 Orange CL 1 w/ White Hi-Int Refl.-XL 9111004 Orange CL 1 w/ White Hi-Int Refl.-2XL 9111005 Orange CL 1 w/ White Hi-Int Refl.-3XL 9111006 Orange CL 1 w/ White Hi-Int Refl.-4XL 9111012 Orange CL 1 w/ Lime Hi-Int Refl.-L 9111013 Orange CL 1 w/ Lime Hi-Int Refl.-XL 9111014 Orange CL 1 w/ Lime Hi-Int Refl.-2XL 9111015 Orange CL 1 w/ Lime Hi-Int Refl.-3XL 9111016 Orange CL 1 w/ Lime Hi-Int Refl.-4XL 9111022 Lime CL 1 w/ White Hi-Int Refl.-L 9111023 Lime CL 1 w/ White Hi-Int Refl.-XL 9111024 Lime CL 1 w/ White Hi-Int Refl.-2XL 9111025 Lime CL 1 w/ White Hi-Int Refl.-3XL 9111026 Lime CL 1 w/ White Hi-Int Refl.-4XL
STANDARD MESH
3009883 3009884 3009885 3009886 3009887 3009889 3009890 3009891 3009892 3009893
CL1 DELUXE SOLID LIME
9111302 Orange CL 1 w/ Silver Refl.-L 9111303 Orange CL 1 w/ Silver Refl.-XL 9111304 Orange CL 1 w/ Silver Refl.-2XL 9111305 Orange CL 1 w/ Silver Refl.-3XL 9111306 Orange CL 1 w/ Silver Refl.-4XL 9111312 Lime CL 1 w/ Silver Refl.-L 9111313 Lime CL 1 w/ Silver Refl.-XL 9111314 Lime CL 1 w/ Silver REFL.-2XL 9111315 Lime CL 1 w/ Silver Refl.-3XL 9111316 Lime CL 1 w/ Silver Refl.-4XL
STANDARD SOLID CL1 STANDARD SOLID ORANGE
STANDARD STYLES
•V elcro closure • Mesh option includes CoolDRY™ fabric which is ultralightweight, breathable, and removes moisture
• 360° visibility with high intensity tape • Machine washable
3009859 3009860 3009861 3009862 3009863 3009865 3009866 3009867 3009868 3009869
9111102 9111103 9111104 9111105 9111106 9111112 9111113 9111114 9111115 9111116
Orange CL 1 w/ Silver Refl.-L Orange CL 1 w/ Silver Refl.-XL Orange CL 1 w/ Silver Refl.-2XL Orange CL 1 w/ Silver Refl.-3XL Orange CL 1 w/ Silver Refl.-4XL Lime CL 1 w/ Silver Refl.-L Lime CL 1 w/ Silver Refl.-XL Lime CL 1 w/ Silver Refl.-2XL Lime CL 1 w/ Silver Refl.-3XL Lime CL 1 w/ Silver Refl.-4XL
CREW NECK SWEATSHIRT
3014494 LIME cl 2 sweat shirt - l 3014496 lime cl 2 sweat shirt - xl 3014497 lime cl 2 sweat shirt - 2xL 3014498 lime cl 2 sweat shirt - 3xL HOODED SWEATSHIRT
NEW CLASS 3 HOODED
FOR 2007
CLASS 2 CREW NECK
ANSI CLASS 2 & 3 micro-FLEECE SWEAT SHIRT • • • • • •
Micropolyester fleece provides excellent comfort and warmth to the wearer Long sleeve gives additional protection against harmful UV rays Class 2 features a crew neck style Class 3 features a hooded style with drawstrings 360° visibility with high intensity tape ThermaGARD material keeps you warm when the temperature drops
3014501 lime cl 3 hooded sweat shirt - l 3014503 lime cl 3 hooded sweat shirt - xl 3014504 lime cl 3 hooded sweat shirt - 2xL 3014505 lime cl 3 hooded sweat shirt - 3xL
SMC ™
Customer Service 1-800-428-8185
A DIVISION OF JACKSON SAFETY
neW for 2007
CL3 LIME SHORT SLEEVE
CL3 ORANGE LONG SLEEVE
AnSi CLASS 3 t-ShirtS • • • • •
LIME CL 3 SHORT SLEEVE - L LIME CL 3 SHORT SLEEVE - XL LIME CL 3 SHORT SLEEVE - 2XL LIME CL 3 SHORT SLEEVE - 3XL LIME CL 3 SHORT SLEEVE - 4XL LIME CL 3 LONG SLEEVE - L LIME CL 3 LONG SLEEVE - XL LIME CL 3 LONG SLEEVE - 2XL LIME CL 3 LONG SLEEVE - 3XL LIME CL 3 LONG SLEEVE - 4XL ORNG CL 3 SHORT SLEEVE - L ORNG CL 3 SHORT SLEEVE - XL ORNG CL 3 SHORT SLEEVE - 2XL ORNG CL 3 SHORT SLEEVE - 3XL ORNG CL 3 SHORT SLEEVE - 4XL ORNG CL 3 LONG SLEEVE - L ORNG CL 3 LONG SLEEVE - XL ORNG CL 3 LONG SLEEVE - 2XL ORNG CL 3 LONG SLEEVE - 3XL ORNG CL 3 LONG SLEEVE - 4XL
3012947 3012948 3012949 3012950 3012955 3012956 3012957 3012958 3012943 3012944 3012945 3012946 3012951 3012952 3012953 3012954
LIME CL 2 SHORT SLEEVE - L LIME CL 2 SHORT SLEEVE - XL LIME CL 2 SHORT SLEEVE - 2XL LIME CL 2 SHORT SLEEVE - 3XL LIME CL 2 LONG SLEEVE - L LIME CL 2 LONG SLEEVE - XL LIME CL 2 LONG SLEEVE - 2XL LIME CL 2 LONG SLEEVE - 3XL ORNG CL 2 SHORT SLEEVE - L ORNG CL 2 SHORT SLEEVE - XL ORNG CL 2 SHORT SLEEVE - 2XL ORNG CL 2 SHORT SLEEVE - 3XL ORNG CL 2 LONG SLEEVE - L ORNG CL 2 LONG SLEEVE - XL ORNG CL 2 LONG SLEEVE - 2XL ORNG CL 2 LONG SLEEVE - 3XL
CL2 ORANGE LONG SLEEVE
AnSi CLASS 2 t-ShirtS
Long sleeves provide additional protection against harmful UV rays Chest pocket with continuous super bright silver retroreflective tape Ribbed collar & cuffs with a stitched hem for added comfort & durability High visibility t-shirts meet ANSI/ISEA 107-2004 Class 2 requirements CoolDRY™ 100% polyester moisture management fabric wicks away excess moisture
3009126 2216692 3009127 2216693
SUSPENDERS ANSI CLASS I SUSPENDERS ANSI CLASS I
3014476 3014477 3014478 3014840 3014841 3014473 3014474 3014475 3014836 3014837
L XL
LIME SHORT SLEEVE - L LIME SHORT SLEEVE - XL LIME SHORT SLEEVE - 2XL LIME SHORT SLEEVE - 3XL LIME SHORT SLEEVE - 4XL ORNG SHORT SLEEVE - L ORNG SHORT SLEEVE - XL ORNG SHORT SLEEVE - 2XL ORNG SHORT SLEEVE - 3XL ORNG SHORT SLEEVE - 4XL
neW for 2007
HIGH PERFORMANCE ORANGE SHORT SLEEVE
HIGH PERFORMANCE LIME SHORT SLEEVE
CooLdry™ hiGh perforMAnCe t-ShirtS
• CoolDRY™ 100% polyester moisture management fabric wicks away excess moisture • Ribbed collar & cuffs with a stitched hem for added comfort & durability
AnSi refLeCtive SuSpenderS
• Meets ANSI/ISEA 107-2004 recommendations for Class 2 safety garment when worn in combination with CoolDry™ High Performance T-shirt
• Break-away design reduces risk of injury
SAfety AppAreL
3014815 3014816 3014817 3014818 3014819 3014829 3014830 3014831 3014832 3014833 3014808 3014809 3014810 3014811 3014812 3014822 3014823 3014824 3014825 3014826
Long sleeves provide additional protection against harmful UV rays Chest pocket with continuous super bright silver retroreflective tape Ribbed collar & cuffs with a stitched hem for added comfort & durability High visibility T-shirts meet ANSI/ISEA 107-2004 Class 3 requirements CoolDRY™ 100% polyester moisture management fabric wicks away excess moisture
CL2 LIME SHORT SLEEVE
• • • • •
33
SAfety AppAreL
www.jacksonsafety.com
fLAMe retArdAnt SAfety veStS: All material and reflective tape meets NFPA 701 standards. Ideal for contractors, public works employees, utilities and transportation workers. Available in 3 separate models
eConoMy non-AnSi
StAndArd AnSi CL2
• Hook and loop closure • Unique 2 size fits all system • Orange PVC coated material with
• Hook and loop closure • Available is sizes M-5X • Lime FR tricot material with silver
lime/silver/lime twin trim
3015095 3015096
FR ORG LSL STD M-XL FR ORG LSL STD 2XL-5XL
reflective tape
3015097 3015098 3015099 3015100 3015101 3015102
CL2 CL2 CL2 CL2 CL2 CL2
FR FR FR FR FR FR
LIME LIME LIME LIME LIME LIME
SLV SLV SLV SLV SLV SLV
STD STD STD STD STD STD
M L XL 2XL 3XL 4XL
deLuxe AnSi CL3 • • • •
Zipper closure Available in sizes M-5X 4 pockets, 2 outside and 2 inside Lime FR polyoxford material with fluorescent orange prizmatic tape
3015105 3015106 3015107 3015108 3015109 3015110
CL3 CL3 CL3 CL3 CL3 CL3
FR FR FR FR FR FR
LIME LIME LIME LIME LIME LIME
FLOUR FLOUR FLOUR FLOUR FLOUR FLOUR
L.e.d. veStS
• Incorporates vertical and horizontal stripes for 360° reflectivity • Flashing L.E.D. in two vertical stripes on front and one vertical stripe on back • Superior protection for law enforcement, emergency response, parking attendants, maintenance • • • • •
ORG ORG ORG ORG ORG ORG
DLX DLX DLX DLX DLX DLX
M L XL 2XL 3XL 4XL
reflectivity
personnel, etc. Front velcro closure Water resistant battery pouch and case holds two standard AA batteries (not included) Battery life: 400 hours (fully charged) Available in front closure 3008836 2212074 L.E.D. VEST - FRONT CLOSURE STYLE - ORANGE Available in lime or orange 3008840 2212093 L.E.D. VEST - FRONT CLOSURE STYLE - LIME
SpeCiALty veStS
• Constructed of heavy-duty vinylcoated fluorescent knit fabric
• Reflective 13⁄8” vertical stripes and • • • •
4” x 16” reflective patches on both front and back Reflective colors of lime or white only. Available in single or double patches Fabric colors available: orange, blue, brown, forest green, black, white, lime, or yellow 3 ⁄4” x 2” front hook & loop closure with 3⁄4” x 8” elastic straps Bound in 3⁄4” black vinyl binding
3006292 0104258 3006293 0104260 3007569 2084635
Standard legends include the following: COMMAND COMMANDER CRIME EMERGENCY EMS
VEST SPECIAL POLICE BLUE W/ LIME VEST SPECIAL POLICE ORANGE W/ LIME VEST SPECIAL SECURITY ORANGE W/ LIME
EMT FIRE FIRE POLICE GUARD HAZ-MAT
INCIDENT LIAISON MANAGER MEDICAL OFFICER
OPERATIONS PARAMEDIC POLICE RESCUE SAFETY
SCENE SCHOOL GUARD SECURITY SHERIFF TRIAGE
Call Customer Service for more details
SMC ™
Customer Service 1-800-428-8185
35
A DIVISION OF JACKSON SAFETY
esk vests: Conforms to OSHA. Workers close to a motor vehicle way should wear bright, highly visible clothing. Check with your state for additional state-mandated vest requirements. xamples of workers wearing ESK Vests include construction sites, warehouse applications, parking locations and E sidewalk maintenance.
esk lime vests
econo style (esk)
•C onforms to OSHA • 11⁄2” orange/silver or 13⁄8” •
• C onforms to OSHA • 3 ⁄4” x 2” front Velcro
red-orange vertical stripes Hook & loop front closure with black cloth binding
•
closure with 3⁄4” x 8” elastic side straps 100% polyester mesh in dayglow orange
3007975 219522 esk vest lime w/ 3m org/ silver reflective - l
3007500 3007506
reflective - l 2080794 esk vest lime plain - l 2080885 esk vest lime w/ 3/4" white reflective -l
reflective vests
• Manufactured from ESK or TWV mesh in dayglow • •
orange Bound in black cotton binding with popular elastic side straps and hook & loop front closure Silver 1” reflective stripes manufactured from Flex-OLite Hi-Index glass beads
• Conforms to OSHA • Fluorescent lime •
ESK ESK ESK ESK ESK ESK ESK ESK ESK ESK
Vest org vest org vest org vest org vest org vest org vest org vest org vest org vest org
plain - l w/ Lime reflective - l w/ 1-3/8" lime reflect - l w/ 3/4" lime reflective XL w/ 3m lime reflective xl w/ 1 3/8" lime l w/ 1 3/8" lime xl w/ 1 3/8" lime 2XL w/ 1 3/8" lime 3Xl w/ 1 3/8" lime 4Xl
100% reflective vest
• Designed with fabric and stripes from 3M™ Scotchlite™ Reflective Materials
• Offers more total reflectivity at night • Two horizontal 13⁄8” lime reflective stripes on both front and back
• Adjustable side straps with O-Ring closure
3007720 2173356 esk vest w/Hi-index glass bead-orange/silver 3009272 5081028 3007907 2183337 twv mesh vest W/Hi-index glass bead-orange/silver
lime tight weave (twv)
0104143 0104193 5081847 2080107 2080092 0104106 0104107 0104108 0104109 0104110
heavy duty (hdv)
• C onforms to OSHA • 3⁄4” x 2” front hook & loop closure with 3⁄4” x 8” elastic side straps
100% silver reflective safety vest-lime stripes
general purpose (gpv) • Conforms to OSHA • 3⁄4” x 2” front hook & loop closure with 3⁄4” x 8” elastic side straps
• Constructed of 6 oz. vinyl coated
• Constructed of flatweave, 7 oz.
• 3⁄4” black vinyl binding
• Cannot be screen printed
fluorescent knit
vinyl coated
3008157 2198394 twv lime w/red-orange 3006269 0103929 vest HDV non- reflective 3006270 0104040 vest GPV non- reflective 3008147 2197443 twv lime w/orange/silver 3m 3007310 2058001 vest HDV 3m lime/silver 3007308 2057992 vest GPV 3m lime/silver 3001744 0103979 vest HDV w/lime reflective 3006273 0104090 vest GPV w/lime reflective
S A FETY A PP A RE L
3001745 3001746 3009274 3001776 3007478 3006275 3006276 3006277 3006278 3006279
3001788 2195524 esk vest lime w/ red/org
SAfety AppAreL
www.jacksonsafety.com
rAinWeAr AnSi CLASS 3 enSeMbLe
neW
• HydroGARD 300 D PU coated polyester outer shell provides
for 2007
a waterproof & breathable system
• Seam sealed throughout with super bright silver retroflective tape • 2 outside front pockets with flip with snap closure, and 1 inside pocket
• Under arm grommets provide ventilation for added breathability • Stow away hood with drawstring inside the collar with a hook-nloop closure system
• Snap closure on sleeve cuff close the space around the hands • Utilizes HydroGARD material: it gets wet, you stay dry 3012930 3012931 3012932 3012933 3012926 3012927 3012928 3012929
LIME CL 3 RAIN JACKET - L LIME CL 3 RAIN JACKET - XL LIME CL 3 RAIN JACKET - 2XL LIME CL 3 RAIN JACKET - 3XL ORNG CL 3 RAIN JACKET - L ORNG CL 3 RAIN JACKET - XL ORNG CL 3 RAIN JACKET - 2XL ORNG CL 3 RAIN JACKET - 3XL
neW
• 1/2” wide super bright silver • •
retroreflective tape Breathable, washable mesh fabric Adjustable elastic band (one size fits all)
3013702 3013703
ORNG W/SILVER RFLCTV LIME W/SILVER RFLCTV
LIME CL E RAIN PANTS - L LIME CL E RAIN PANTS - XL LIME CL E RAIN PANTS - 2XL LIME CL E RAIN PANTS - 3XL ORNG CL E RAIN PANTS - L ORNG CL E RAIN PANTS - XL ORNG CL E RAIN PANTS - 2XL ORNG CL E RAIN PANTS - 3XL
neW
neW
for 2007
AnSi SAfety CApS Cover
3012939 3012940 3012941 3012942 3012935 3012936 3012937 3012938
for 2007
for 2007
AnSi refLeCtive bALL CApS • 2” wide super bright silver • •
retroflective tape Breathable, washable mesh fabric Adjustable Velcro strap (one size fits all)
3013113 3013114
ORANGE W/SILVER REFLECTIVE LIME W/SILVER REFLECTIVE
AnSi refLeCtive fLeeCe CApS • 1/2” wide super bright silver retroreflective tape
• Fleece fabric for soft touch and additional warmth
• One size fits all
3014361 3014360
ANSI FLEECE CAPS LIME WITH SILVER ANSI FLEECE CAPS ORANGE WITH SILVER
Winter WeAr AnSi CLASS 3 StorM JACket • • • • •
ANSI/ISEA 107-2004 Class 3 Velcro adjustable cuffs Stow away hood inside collar Zipper travels to neck for full insulation Fleece lined vest can be zipped out and worn alone
AnSi CLASS e StorM pAntS • • • • CLASS 3 JACKET
3009694 3009298 3009695 3009696 3009698 3009699 3009700 3009701
9150000 9150001 9150002 9150003 9150100 9150101 9150102 9150103
CLASS E PANTS ORANGE CLASS 3 JACKET W/SILVER REFLECTIVE ORANGE CLASS 3 JACKET W/SILVER REFLECTIVE ORANGE CLASS 3 JACKET W/SILVER REFLECTIVE ORANGE CLASS 3 JACKET W/SILVER REFLECTIVE LIME CLASS 3 JACKET W/SILVER REFLECTIVE L LIME CLASS 3 JACKET W/SILVER REFLECTIVE XL LIME CLASS 3 JACKET W/SILVER REFLECTIVE 2XL LIME CLASS 3 JACKET W/SILVER REFLECTIVE 3XL
L XL 2XL 3XL
3009702 3009299 3009704 3009705 3009706 3009707 3009708 3009710
Unlined storm pants Side zippers for coverage over boots Belted waist with zipper fly Side slit pockets, single rear pocket with flap and zipper 9151000 9151001 9151002 9151003 9151100 9151101 9151102 9151103
ORANGE CLASS E PANTS W/SILVER REFLECTIVE L ORANGE CLASS E PANTS W/SILVER REFLECTIVE XL ORANGE CLASS E PANTS W/SILVER REFLECTIVE 2XL ORANGE CLASS E PANTS W/SILVER REFLECTIVE 3XL LIME CLASS E PANTS W/SILVER REFLECTIVE L LIME CLASS E PANTS W/SILVER REFLECTIVE XL LIME CLASS E PANTS W/SILVER REFLECTIVE 2XL LIME CLASS E PANTS W/SILVER REFLECTIVE 3XL
SMC ™
Customer Service 1-800-428-8185
37
A DIVISION OF JACKSON SAFETY
ansi class 3 convertible parka
• Meets ANSI/ISEA 107-2004 Class 3 with sleeves and • • • •
converts to meet ANSI/ISEA 107-2004 Class 2 without sleeves Knit cuffs with over the cuff adjustable snap wrist closures Stow away hood inside collar Zipper travels to neck for full insulation Zips in to the All Weather Parka (shown below) for additional protection 3009724 3009726 3009727 3009728 3009729 3009301 3009731 3009733
CLASS 3
9153000 orange Parka w/silver reflective l 9153001 orange Parka w/silver reflective Xl 9153002 orange Parka w/silver reflective 2xL 9153003 orange Parka w/silver reflective 3xL 9153100 lime Parka w/silver reflective l 9153101 lime Parka w/silver reflective Xl 9153102 lime Parka w/silver reflective 2xL 9153103 lime Parka w/silver reflective 3xL
CLASS 2
• ANSI Class 3 Convertible Parka (shown above) may be zipped • • • •
inside for additional protection and warmth Insulated patch pockets with flaps Elastic cuffs with adjustable closure Convenient zip on hood Zipper travels to neck for full insulation
3009712 3009713 3009716 3009719 3009718 3009300 3009720 3009722
9152000 all weather parka class 3 orange w/silver reflective l 9152001 all weather parka class 3 orange w/silver reflective Xl 9152002 all weather parka class 3 orange w/silver reflective 2Xl 9152003 all weather parka class 3 orange w/silver reflective 3Xl 9152100 all weather parka class 3 lime w/silver reflective l 9152101 all weather parka class 3 lime w/silver reflective Xl 9152102 all weather parka class 3 lime w/silver reflective 2Xl 9152103 all weather parka class 3 lime w/silver reflective 3Xl
ANSI CLASS E all weather pants • • • •
Fleece lined Side zippers for coverage over boots Belted waist and zipper fly Side slit pockets, single rear pocket with flap and zipper
3009734 3009736 3009737 3009738 3009739 3009302 3009740 3009741
9154000 all weather pants class e orange w/silver reflective l 9154001 all weather pants class e orange w/silver reflective Xl 9154002 all weather pants class e orange w/silver reflective 2Xl 9154003 all weather pants class e orange w/silver reflective 3xl 9154100 all weather pants class e lime w/silver reflective l 9154101 all weather pants class e lime w/silver reflective Xl 9154102 all weather pants class e lime w/silver reflective 2Xl 9154103 all weather pants class e lime w/silver reflective 3Xl
S A FETY A PP A RE L
Ansi Class 3 all weather SYSTEM
TRAFFIC SAFETY
www.jacksonsafety.com
barricade lights SUNDOWNER® • • • • • • • • •
Available in 6V or 12V battery configuration 3-Way or Flashing models available Photocell for automatic on-off by light conditions Theft-resistant bolts with custom socket 360° lens rotation Improved lens for better visibility Meets MUTCD requirements ITE Certified Priced & packed 10 per box/sold in full boxes only
3004535 2026486 3008802 2210867 CALL CALL 3009428 48714032 3009297 7850005
6V FLASHER WITH PHOTo CELL - INCANDESCENT BULB, YELLOW CASE & AMBER LENS 12V FLASHER WITH PHOTO CELL - INCADESCENT BULB, YELLOW CASE & AMBER LENS W/ INCANDESCENT BULB - ALL COMBOS EXCEPT 3 WAY W/ L.E.D. 6V FLASH OR STEADY BURN WITH YELLOW CASE AND AMBER LENS 6V 3 WAY W/SOLAR, YELLOW CASE & AMBER LENS 12V 3 WAY W/SOLAR, YELLOW CASE AMBER LENS
nightflasher®
• Meets MUTCD requirements and ITE specs in 12V • • •
configuration 7” polycarbonate lens with advanced optics Dependable circuity coated for protection against weather Blinking, steady burn and 3-way modes
nightflasher® 3007030 2027155
6v flasher w/photo cell incandescent bulb, yellow case/amber lens call w/ incandescent bulb-all combos except 3 way 3007972 2192041 l.e.d. 6v flashing w/photo cell-yellow case 3007971 2192039 l.e.d. 6v steady burn w/photo cell-yellow case 3007970 2192027 l.e.d. 6v 3-way w/photo cell-yellow case
paralta®
• High density polyethylene case, UV stabilized, • •
paralta® 3007028 2027131
6v flasher with photo cell, incandescent bulb, yellow case/amber lens call w/ incandescent bulb - all combos except 3 way 3007969 2192015 l.e.d. 6v flashing with photo cell - yellow case 3007967 2191994 l.e.d. 6v 3-way with photo cell - yellow case
REPLACEMENTS 2000258 2018790 2000249 2004552 2004541 1000545 1000546
2010463 2015152 2006668 2006670 2006682
2057306 2033192 2026759 2066589 2217712 2218561 2004900 1002140
YOUR DESIGN, YOUR LOGO, YOUR MESSAGE, ...OUR PLEASURE.
SUNDOWNER 7” AMBER LENS, HALF POLY NIGHTFLASHER 7” AMBER LENS, HALF POLY PARALTA 7” AMBER LENS ASSEMBLY (COMPLETE) POLY 6V FLASHING W/#1850 LAMP-CIRCUIT ONLY 6V FLASHING W/PHOTO CELL & INCANDESCENT BULB-CIRCUIT ONLY 6V STEADY BURN W/PHOTO CELL & INCANDESCENT BULB-CIRCUIT ONLY
ACCESSORIES 3001752 0118144 1002141 3007279 3007026 3007410 1000612 3009182 1000544 2053996
available in blue, green orange, red, black, white and yellow Lens colors available in red, green, amber, clear and blue Available in standard 6V or 6V photocell, 12V or 12V photocell, and 6V steady burn with photo cell switch. Also available in 6V L.E.D. Call customer service for details
6V BATTERY, SPRING TYPE (12/BOX) SOLD PER CASE ONLY BOLT PROTECTOR 6V FLASHING BULB & STEADY BURN BULB, #1850 (100/CTN.) 9.8V FLASHING BULB, #1408 12V FLASHING BULB, #1408 GE UNIVERSAL WRENCH KIT-10 BOLTS, 2 WRENCHES, 1 WIRE KEY UNIVERSAL WRENCH UNIVERSAL BOLT, 3-3/4” 4” BOLT
lights can be hot stamped • Call Customer Service for details.
SMC ™
Customer Service 1-800-428-8185
39
A DIVISION OF JACKSON SAFETY
rotating light • 7 1⁄4”H x 4 3⁄4” base
mini-strobe • • • • • • • • •
3 1/2”H x 4” base diameter Weight: 1.5 lbs Micro-burst mini-strobe Sonic welded unit, completely sealed Magnet mount with 12’ straight cord and plug, builtin on/off switch 3-year warranty, including the bulb 60 bright quad flashes per minute Blue, red and green lens can be special ordered Flash per minute: 60
3008863 2212279
• • • • • • • • • • • •
1.5 LB mini strobe, plugs into lighter
diameter Weight: 3.8 lbs Amperage: 5 amps Lens: Polycarbonate Candlepower: 12,000 Light Source: Quartz-Halogen Bulb Electronics: All Solid State Circuitry Operating Range: Outside temperature range between -50°F and 140°F Reflector Rotation: 150 r.p.m. Rotating reflector is driven by a 12 volt D.C. motor All units furnished with magnetic/suction pad base Bulb (strobe) stays stationary and the housing (reflector) moves around it Permanent mount light available - Call Customer Service for details
3007378 2059419 3.8 LB strobe with lighter
magnetic base, plugs into
• • • • • • • • • • •
4 3⁄8”H x 4 1⁄4” base diameter Weight: 2.5 lbs Lens: Polycarbonate Light Source: Single hit Xenon Flash Tube Electronics: All Solid State Circuitry Candlepower: 90,000 Amperage: 4 amps Operating Range: Outside temperature range between -40°F to +122°F Flash per minute: 60 Operating range of 11-15.5 volts Offered only with magnetic/suction base design with cigarette lighter plug
3008104 2195380 2.5 LB
low profile strobe with magnetic base, plugs into lighter
single flash strobe • • • • • • • • • •
4 1/2”H x 5 1/2” base diameter Weight: 1.5 lbs 12/24 V, multi-voltage Rubber base for resistance to shock and vibration Potted circuit to protect against dirt and moisture Versatile and durable, featuring a low profile design Bulb life: 1,000 hours 2-year warranty (does not apply to bulb) Available in magnet mounted with coiled cord and cigarette plug Blue, red and green lens can be special ordered
3008862 2212243 1.5 LB
heavy duty strobe • • • • • • • • • • •
7 1⁄4”H x 4 3⁄4” base diameter Weight: 3.8 lbs Lens: Polycarbonate Light Source: Double Xenon Flash Tube Electronics: All Solid State Circuitry Candlepower: 74,000 Amperage: 5 amps Flash per minute: 60 Operating Range: Outside temperature range between -50°F and 140°F Virtually maintenance-free, 10-36 volt range, warning light All units furnished with magnetic/suction pad base or permanent mounting hardware
3007306 2057784 3.8 LB heavy duty strobe with magnetic base, plugs into lighter 3007307 2057796 permanent mount, attaches to battery 3007475 2078829 xenon replacement bulb for heavy duty strobe
single flash strobe, plugs into lighter
TR A FFI C S A FETY
low profile strobe
TRAFFIC SAFETY
www.jacksonsafety.com
PLASTIC type i and type ii barricades*
Type I
• • • • • • • • •
Type II
NCHRP-350 Certified with and without lights Meets MUTCD standards Weighs only 15 lbs Low profile -- Folded dimensions are 2.5”H x 24”W x 45.5”L 12” x 24” top panels and 8” x 24” bottom panels afford maximum panel area for reflective sheeting, logos or stenciling Engineer Grade or Hi Intensity reflective sheeting available Built-in bracket accommodates barricade light Optional plastic Sand Ballast Bar for additional weight Closed hinge feature prevents pinched fingers during placement and retrieval
Type I 3001783 3007828 3007829 3007830 Type II 3007831 3007832 3007833 3007834
2181000 all-plastic type i, 24” x 8” x 8”, EG sheeting 2181001 all-plastic type i, 24” x 8” x 8”, hi sheeting 2181002 all-plastic type i, 24” x 12” x 8”, eg sheeting 2181003 all-plastic type i, 24” x 12” x 8”, hi sheeting 2181005 all-plastic type ii, 24” x 8” x 8”, EG sheeting 2181006 all-plastic type ii, 24” x 8” x 8”, hi sheeting 2181007 all-plastic type ii, 24” x 12” x 8”, eg sheeting 2181008 all-plastic type ii, 24” x 12” x 8”, hi sheeting
wood/steel type i & type ii barricades • • • • • •
Type I
NCHRP-350 Certified Rugged steel and plywood barricade 1/2” ACX plywood dipped in white water-based latex paint 24” and 36” lengths Durable, weather-resistant 14 gauge galvanized steel legs Engineer grade sheeting standard. High Intensity sheeting available
3007864 3007865 3007866 3007867 3007868
Type II
2181043 wood barr type i, 24” x 8” x 6” 2181044 wood barr type i, 36” x 8” x 6” 2181045 wood barr type ii, 24” x 8” x 8” 2181046 wood barr type ii, 36” x 8” x 8” 2181047 barricade legs (14 gauge) - single leg
PLASTIC type iii barricades*
• NCHRP-350 Certified with and without lights • Meets MUTCD standards • Easy assembly -- simply lower the barricade uprights into the receivers on the base
• Modular design includes upright stand, 63” tall, and 3 - 1” x • • • • •
Type III
Stenciling available on these products.
8-1/4” deep plastic boards in 48”, 72” or 96” lengths Lightweight and durable all-plastic construction Reinforced boards eliminate bowing Accommodates flashing barricade light Available with Engineer Grade or Hi Intensity sheeting, single or double sided Call Customer Service for lead time
3007836 2181010 all-plastic type iii, 1” x 8” x 48”, no sheeting 3007837 2181011 all-plastic type iii, 1” x 8” x 48”, eg rt sheeting 3007879 2181060 all-plastic type iii, 1” x 8” x 48”, egx2 rt/lt sheeting 3007838 2181013 all-plastic type iii, 1” x 8” x 48”, hi rt sheeting 3007883 2181065 all-plastic type iii, 1” x 8” x 48”, hix2 rt/lt sheeting 3007840 2181015 All-plastic type iii, 1” x 8” x 72”, no sheeting 3007841 2181017 all-plastic type iii, 1” x 8” x 72”, eg rt sheeting 3007960 2181064 all-plastic type iii, 1” x 8” x 72”, egx2 rt/lt sheeting 3007843 2181019 all-plastic type iii, 1” x 8” x 72”, hi rt sheeting 3007882 2181063 all-plastic type iii, 1” x 8” x 72”, hix2 rt/lt sheeting 3007845 2181021 all-plastic type iii, 1” x 8” x 96”, no sheeting 3007846 2181022 all-plastic type iii, 1” x 8” x 96”, eg rt sheeting 3007881 2181062 all-plastic type iii, 1” x 8” x 96”, egx2 rt/lt sheeting 3007848 2181024 all-plastic type iii, 1” x 8” x 96”, hi rt sheeting 3007880 2181061 all-plastic type iii, 1” x 8” x 96”, hix2 rt/lt sheeting Note: eg/hi sheeting left side also available
SMC ™
Customer Service 1-800-428-8185
41
A DIVISION OF JACKSON SAFETY
plastic a-frame barricade • • • • • • • • • •
Unique Dual Use: A-Frame legs can be put together with hinge pin (included) to use as rigid sign stand
• • •
NCHRP-350 Certified Meets MUTCD standards Ideal for use as parade route barricade Impact-resistant polypropylene with special additive is weather resistant in extreme conditions Made of 30% recycled material Accommodates up to two 2” x 8” x 6’ or 2” x 8” x 8’ plastic rails, sold separately Standard package includes one leg - for complete set, order two legs (as shown in picture) Barricade can be Type I (single rail) or Type II (2 rails) Rails are reinforced to resist bowing in hot weather conditions Rails available with Engineer Grade or Hi-Intensity Grade reflective sheeting, one side or both sides Lightweight, easy to handle Reflective sheeting factory applies for maximum adhesion Stenciling available 2181048 plastic barricade a-frame leg 2181049 plastic barr 2” x 6’ rail, non-reflective 2181050 plastic barr 2” x 6’ rail, eg sheeting - 1 side 2181051 plastic barr 2” x 6’ rail, eg sheeting - 2 sides 2181052 plastic barr 2” x 6’ rail, hi sheeting - 1 side 2181053 plastic barr 2” x 6’ rail, hi sheeting - 2 sides 2181055 plastic barr 2” x 8’ rail, non-reflective 2181056 plastic barr 2” x 8’ rail, eg sheeting - 1 side 2181057 plastic barr 2” x 8’ rail, eg sheeting - 2 sides 2181058 plastic barr 2” x 8’ rail, hi sheeting - 1 side 2181059 plastic barr 2” x 8’ rail, hi sheeting - 2 sides
type iii plastic replacement boards • • • • Features waffle inserts for rigidity
sandbags • • • • • • • •
Hemmed top polypropylene sandbags Tie cord attached Available in 14” x 26” or 18” x 27” Colors: white or orange Orange UV rating - 1,200 hrs White UV rating - 500 hrs 100 sandbags per bundle Mildew resistant
3006693 3007298 3007297 3007299
0119174 sandbag - white 14” x 26” 2057320 sandbag - orange 14” x 26” 2057318 sandbag - white 18” x 27” 2057332 sandbag - orange 18” x 27”
Lightweight and durable all-plastic construction Reinforced boards eliminate bowing when bolted to upright Accommodates flashing barricade light Available with Engineer Grade or Hi Intensity sheeting, single or double sided
3009677 2181026 type iii rpl boards, 1” x 8” x 48”, no sheeting 3007851 2181029 type iii rpl boards, 1” x 8” x 48”, eg sheeting - 2 sides 3007853 2181032 type iii rpl boards, 1” x 8” x 48”, hi sheeting - 2 sides 3007854 2181033 type iii rpl boards, 1” x 8” x 72”, no sheeting 3007856 2181035 type iii rpl boards, 1” x 8” x 72”, eg sheeting - 2 sides 3007858 2181037 type iii rpl boards, 1” x 8” x 72”, hi sheeting - 2 sides 3007859 2181038 type iii rpl boards, 1” x 8” x 96”, no sheeting 3007861 2181040 type iii rpl boards, 1” x 8” x 96”, eg sheeting - 2 sides 3007863 2181042 type iii rpl boards, 1” x 8” x 96”, hi sheeting - 2 sides Note: eg/hi sheeting left side also available
sand ballast system
• Adds up to 10 lbs of ballast with hollow high impact
plastic panel that can be filled with sand or pea gravel
• Set of 2 - 5.75” x 15” panels (sold as a pair) • Mounts with two bolts and nuts (included) to barricade legs below lower panel for integral fit
3007835 2181009 weight cartridges (Sbs system)
TR A FFI C S A FETY
3001784 3007869 3007870 3007871 3007872 3007873 3007874 3007875 3007876 3007877 3007878
TRAFFIC SAFETY
www.jacksonsafety.com
trailblazer vertical panel*
• Meets NCHRP-350 requirements with or without barricade lights
• Engineer Grade or Hi Intensity reflective sheeting • • • • • • • •
available Meets MUTCD standards Lightweight; Weighs only 3.4 lbs sheeted Stackable, high visibility barricade Accommodates flashing barricade light 15 lb, 20 lb, and 30 lb bases available Extreme heat and cold weather durability Recessed panels protect reflective sheeting Impact resistant polyethylene
3007676 3007677 3007678 3007679 3007680 3007681 3007674 3007675
2161003 no sheeting, top only 2161004 engineer grade sheeting, both sides, top only 2161005 engineer grade 3m sheeting, both sides, top only 2161006 hi intensity sheeting, both sides, top only 2161007 hi intensity 3m sheeting, both sides, top only 2161008 15 lb rubber base, 18.5”w X 22”L X 1.3”H 2161001 20 lb rubber base, 18.5”W X 22”L X 1.8”H 2161002 30 lb rubber base, 18.5W X 22”L X 2.6”H
Directional 3 in 1 Design
trailblazer directional panel* Type II
Type I Stenciling available on these products.
• • • • • • • • •
Meets NCHRP-350 requirements with and without barricade lights Engineer Grade or Hi Intensity reflective sheeting available Meets MUTCD standards High visibility 8” x 24” reflective panel 12” x 24” directional indicator Lightweight: Weighs only 8.9 lbs sheeted Stackable Engineer Grade or Hi Intensity reflective sheeting available Accommodates flashing barricade light 28 lb base available
3007684 2161501 No Sheeting, top only type i Single reflective panel 3007685 2161502 8” x 24” engineer grade eg sheeting, both sides, top only 3007686 2161503 8” x 24” 3m engineer grade eg sheeting, both sides, top only 3007687 2161504 8” x 24” hi intensity sheeting, both sides, top only 3007688 2161505 8” x 24” 3m hi intensity sheeting, both sides, top only type 2 Two reflective panels 3007689 2161506 8” x 24” engineer grade eg sheeting, both sides, top only 3007690 2161507 8” x 24” 3m engineer grade eg sheeting, both sides, top only 3007691 2161508 8” x 24” hi intensity sheeting, both sides, top only 3007692 2161509 8” x 24” 3m hi intensity sheeting, both sides, top only directional barricade arrow/reflective panel 3007693 2161510 12” x 24” arrow, 8” x 24” engineer grade eg sheeting, both sides, top only 3007694 2161511 12” x 24” arrow, 8” x 24” 3m engineer grade eg sheeting, both sides, top only 3007695 2161512 12” x 24” arrow, 8” x 24” hi intensity sheeting, both sides, top only 3007696 2161513 12” x 24” arrow, 8” x 24” 3m hi intensity sheeting, both sides, top only 3007683 2161500 28 lb rubber base, 32”W x 36.6”L
SMC ™
Customer Service 1-800-428-8185
43
A DIVISION OF JACKSON SAFETY
Trail boss channelizer drum* • • • • • • • • • • •
eets NCHRP-350 requirements with or without barricade lights M Meets or exceeds all MUTCD specifications Five panels available for sheeting Accommodates Allsafe-SMC barricade lights Patented handle design allows for easy pickup, even with barricade light attached Choice of three bases: 25 lb. and 35 lb recycled rubber or plastic snapon for use with sandbag Bases incorporate a waffle pattern on bottom to eliminate ‘walking’ or ‘creeping’ Anti-Roll foot design Tapered design enables nesting for storage or transport Accommodates tire ring base Dimensions - 39.7”H x 20.5”W at base 2110000 2110001 2110002 2110004 2110006 2110008 2110100 2110101 2110102 2110104 2111000 2111001 2111002
1600 TOP ONLY PLAIN 1600 TOP ONLY WITH 4 engineer GRADE 4" STRIPES, 1600 TOP ONLY WITH 4 engineer GRADE 6" STRIPES, 1600 TOP ONLY WITH 4 HI INTENSITY. 4" STRIPES, 3M 1600 TOP ONLY WITH 4 HI INTENSITY 6" STRIPES, 3M 1600 TOP ONLY WITH 4 DIAMOND GRADE 6" 1610 TOP ONLY PLAIN 1610 TOP ONLY WITH 4 engineer GRADE 4" STRIPES, 1610 TOP ONLY WITH 4 engineer GRADE 6" STRIPES, 1610 TOP ONLY WITH 4 HI INTENSITY 4" STRIPES, 3M PLASTIC SNAP-ON BASE 25 LB RECYCLED RUBBER BASE 35 LB RECYCLED RUBBER BASE
3M 3M
3M 3M
1600 models are constructed of Linear Low Density Polyethylene. 1610 models are constructed of High Density Polyethylene.
channelizer drum* • • • • • •
Meets NCHRP-350 requirements with our without barricade lights Meets or exceeds all MUTCD specifications Accommodates Allsafe-SMC barricade lights Anti-Roll drum design Base incorporates waffle pattern on bottom to eliminate ‘walking’ or ‘creeping’ Tapered design enables nesting for storage or transport
3007292 3007442 3007443 3008624 3008629 3007439 3007441 3001773 3001773 3007293 3007449 3007450 3010152 3007446 3007448 3001774 3007725 3007605
2054457 2070188 2070190 2204703 2204715 2070165 2070177 2070413 2070413 2054471 2070229 2070231 2204739 2070206 2070218 2070425 2173459 2088262
1500 top only plain 1500 top only with 4 engineer GRADE 4” STRIPES, 1500 top only with 4 engineer GRADE 6” STRIPES, 1500 top only with 4 diamond grade 4”STRIPES 1500 top only with 4 diamond grade 6”STRIPES 1500 top only with 4 HI INTENSITY 4" STRIPES, 3m 1500 Top only with 4 HI INTENSITY 6" STRIPES, 3m 1500 PLASTIC SNAP ON BASE (REQUIRES SANDBAG) 1500 Base only 1510 top only plain 1510 top only with 4 engineer GRADE 4” STRIPES, 1510 top only with 4 engineer GRADE 6” STRIPES, 1510 top only with 4 diamond grade 6” STRIPES 1510 top only with 4 HI INTENSITY 4" STRIPES, 3m 1510 top only with 4 HI INTENSITY 6" STRIPES, 3m 1510 PLASTIC SNAP ON BASE (REQUIRES SANDBAG) 25 lb recycled rubber base 35 lb recycled rubber base
3M 3M
3M 3M
1500 models are constructed of Linear Low Density Polyethylene. 1510 models are constructed of High Density Polyethylene.
Stenciling available on these products.
TR A FFI C S A FETY
3007648 3007649 3007650 3007652 3007654 3007655 3007657 3007658 3007659 3007661 3007667 3007668 3007669
trAffiC SAfety
www.jacksonsafety.com
neW for 2007
• Stackable for confined storage • Channelizer cone utilizes less space than traditional barrels or drums • 42” tiered cone design with the easy Grip-N-Go™ handle; 47” to the handle top
• Available in various reflective sheeting with recessed areas for protection when stacking
• Handle accommodates all Allsafe-SMC barricade lights and barrier • • • • • • •
tape products Low density polyethylene with UV inhibitors minimizes fading 100% recycled rubber bases available in 2 shapes Dimensions of handle: Inside 1-3/4” wide x 3-3/8” high Outside 3-1/2” wide x 5” high Diameter of cone base: 9-7/8” Conforms to NCHRP 350 standards Meets MUTCD standards for nighttime use
3014081 3014082 3014083 3014084 3014085 3009066 3007532 3014088 3014089
42” CHANNELIZER W/O SHEETING 42” CHANNELIZER (1) 4” & (1) 6” HI SHEETING 42” CHANNELIZER (4) 4” HI SHEETING 42” CHANNELIZER (4) 6” HI SHEETING 42” CHANNELIZER (2) 6”DG & (2) 6” HI SHEETING CHANNELIZER 10LB OCTAGONAL BASE CHANNELIZER 15LB OCTAGONAL BASE CHANNELIZER 20LB. RECTANGULAR BASE CHANNELIZER 30LB. RECTANGULAR BASE
Connect your barricade light here
iMpACt reCovery deLineAtorS
• Flexible, high-impact delineation devices are designed with energy absorbing mechanics producing a longer lasting traffic control device
• Constructed with a unique reactive spring to give with impact & rebound towards traffic.
• Withstands tested speeds up to 30 mph • Available in solid white post with two 3” orange reflective collars, or solid orange post with two 3” white reflective collars
• Comes with a “fixed” 8” x 8” base designed for concrete median barriers or road
surface application using bolts or epoxy (Post and base sold as single unit. Simple assembly required)
3007581 3007582 3007580 3007579 3007578 3007577
2085961 2085974 2085948 2085935 2085922 2085909
36" 36" 42" 42" 48" 48"
ORANGE DELINEATOR POST WITH BASE – WHITE WHITE DELINEATOR POST WITH BASE – ORANGE WHITE DELINEATOR POST WITH BASE – ORANGE ORANGE DELINEATOR POST WITH BASE – WHITE WHITE DELINEATOR POST WITH BASE – ORANGE ORANGE DELINEATOR POST WITH BASE – WHITE
SHEETING SHEETING SHEETING SHEETING SHEETING SHEETING
SMC ™
Customer Service 1-800-428-8185
45
A DIVISION OF JACKSON SAFETY
channelizer cones
• Available in 28", 36" and 42" heights • Sets of 2 or 4 collars available. Optional reflective dot for added reflectivity and safety
• Stackable for confined storage 3009067 3009096 3009091 3009068 3009094 3009090 2004630 2004631 3008121
2215518 channelizer cone – 28”-plain 2215984 channelizer cone – 28” with 4” & 6” collars 2215958 channelizer cone – 28” with 4” & 6” collars & reflective dot 2215520 channelizer cone – 36”-plain 2215972 channelizer cone – 36” with 4” & 6” collars 2215946 channelizer cone – 36” with 4” & 6” collars & reflective dot 2215831 channelizer cone 6” upper collar 2215843 channelizer cone 4” lower collar 2195902 yellow reflective dot only 2-7/8”
•M ade from 100% recycled rubber • Can be used with any flanged channelizer cone • 10 lb., 15 lb. and 22 lb. weights available 3009066 2215506 channelizer cone base – 10 lbs. recycled rubber 3007532 2082880 channelizer cone base – 15 lbs. recycled rubber 3001779 2082885 channelizer cone base – 22 lbs. recycled rubber
deluxe delineator post • • • • •
NCHRP-350 approved Standard 4” x 42” high post, overall height 47” Two 3”reflective bands standard 16”W x 11⁄2”H octagon base with interlocking high-density polyethylene post Optional 3” round yellow reflective dot on both sides of post for additional safety
3007642 3008102 3001742 3006195 3008121
2094294 deluxe delineator post only, 42” 2195366 deluxe delineator post only, 42” with yellow reflective dot 0102391 rubber delineator base – 10 lb 0102406 rubber delineator base – 15 lb 2195902 yellow reflective dot only - No Post Included 2-7/8”
maxi-post components • • • • • •
CHRP-350 Approved N Standard 4” x 38” high post, overall height 43” Two 3” reflective bands standard Features 8” diameter cast aluminum base with clamp Order optional 3” round yellow reflective dot on both sides of post for additional safety Anchor bolts not included
3007643 3007983 3007302 3006196 3008121
2094307 2193578 2057576 0102468 2195902
delineator maxi post only, 42” x 3”. permanent mount delineator maxi post only, 42” x 3” with yellow reflective dot metal delineator base – permanent mount delineator base clamp 8”– permanent mount yellow reflective dot only 2-7/8”
TR A FFI C S A FETY
channelizer cone base
TRAFFIC SAFETY
www.jacksonsafety.com
BASIC CONE STYLES: DW: W: F: FL:
See Page 48 For Cone Weights and Dimensions
Wide body design with BLACK BASE Wide body design with ORANGE BASE Slim line body design with ORANGE BASE Narrow wind resistant profile with ORANGE BASE
DW series*
W series*
3004101 3004020 3004023 3004319 3004057 3004236 3004059 3004176 3004254 3004256 3004159 3004231 3004226
3004094 3004019 3004042 3004158 3004245 3004181 3004183 3004175 3004160 3004272 3004278 3004280
• Meets MUTCD standards • Wide body design with rugged black base • Flow molded, dayglow orange PVC w/white inner liner 0100680 dw cone – 6” [1.5 lbs] 0100032 dw cone – 12” [1.5 lbs] 0100109 dw cone – 18” [3 lbs] 2215283 dw cone – 18” with 6” collar, 3M [3 lbs] 0100355 dw cone – 28” [7 lbs] 2193643 dw cone – 28” [7 lbs] with 4”& 6” collars, 3M 0100408 dw cone – 28” [7 lbs] flagtop 2058647 dw cone – 28” [10 lbs] 2202341 dw cone – 28” [10 lbs] with 4”& 6” Collars 2202353 dw cone – 28” [10 lbs] with 4”& 6” collars, 3M 2058116 dw cone – 36” [10 lbs] 2193631 dw cone – 36” [10 lbs] with 4”& 6” collars, 3M 2089926 dw cone – 36” [12 lbs]
• M eets MUTCD standards • Wide body design with orange base • Flow molded, dayglow orange PVC w/white inner liner 0100666 w Cone -- 4” [.38 LBS] 0100006 w cone – 12” [2 LBS] 0100238 w cone – 18” [2.5 LBS] 2058087 w cone – 28” [6.5 LBS] 2196970 w cone – 28” with 4”& 6” collars, 3M [6.5 lbs] 2068000 w cone – 28” [7 lbs] 2068002 w cone – 28” with 4”& 6” COLLARS, 3M [7 lbs] 2058635 w cone – 28” [10 lbs] 2058130 w cone – 36” [10 lbs] 2202432 w cone – 36” with 4”& 6” collars, 3M [10 lbs] 2202468 w cone – 36” [12 lbs] 2202482 w cone – 36” with 4”& 6” COLLARS, 3M [12 lbs]
NOW AVAILABLE IN 28” & 36” STYLES
W series: recessed coNEs* • • • • •
eets MUTCD standards M One piece wide body design and construction Easier stacking - no pinch points with collars Increased durability for reflective sheeting; recessed collars resist direct wear Protected reflective translates into longer service life lowering overall usage costs
3004604 2069001 W CONE RECESSED 28” [7 lbs] 3004204 2069000 w cone recessed 28” without tape [7 lbs] 3015126 w cone recessed 36” fluor.o/h st 5102 3015127 w cone recessed 36” 6 upper refl.fl.o/h 5102 3015128 w cone recessed 36” 6 upper/4 lower 3m fl.o/h 5102
fluorescent LIME*
• Wide body design • Flow molded, dayglow fluorescent lime with white inner liner
• D ifferentiates work zone for added measure of safety • Fluorescent color increases pedestrian and driver awareness
3004283 3004286 3004288 3004297 3004287 3004290
2212126 W cone Fluorescent Lime 18” [2.5 lbs] 2212138 W cone Fluorescent Lime 28” [6.5 lbs] 2212152 W cone Fluorescent Lime 28” w/ 4”& 6” collars [6.5 lbs] 2214540 W cone Fluorescent Lime 28” w/ 4”& 6” collars, 3M [6.5 lbs] 2212140 W cone Fluorescent Lime 36” [10 lbs] 2212164 W cone Fluorescent Lime 36 w/ 4”& 6” collars [10 lbs]
*Must be purchased in multiples of 20 for 6” cones, 20 for 12” cones, 10 for 18” cones, 10 for 28” cones and 8 for 36” cones.
SMC ™
Customer Service 1-800-428-8185
A DIVISION OF JACKSON SAFETY
f SerieS* • • • •
Meets MUTCD standards Slim line body design to enhance wind resistance 10 pound weight on 28” F Cone Flow molded, dayglow red/orange with white inner liner
3004179 2058659 3004262 2202391 3004252 2197390
fL SerieS*
• Meets MUTCD standards • Narrow wind resistant profile with orange base • Flow molded, dayglow red/orange PVC with white inner liner
3004034 3004322 3009162 3004071 3004251 3004085 3004277
F CONE 28” [10 LBS] F CONE 28” W/ 4” & 6” COLLARS [10 LBS] F CONE 28” W/ 4” & 6” COLLARS, 3M [10 LBS]
0100185 2215611 2217982 0100484 2197388 0100604 2202456
FL CONE FL CONE FL CONE FL CONE FL CONE FL CONE FL CONE
18” 18” 18” 28” 28” 36” 36”
[2.4 LBS] WITH 4” COLLAR, 3M [2.4 LBS] WITH 6” COLLAR, 3M [2.4 LBS] [5.5 LBS] WITH 4” & 6” COLLARS, 3M [5.5 LBS] [8 LBS] WITH 4” & 6” COLLARS, 3M [5.5 LBS]
for 2007
pACk And pop CoLLApSibLe Cone • • • • • • • •
Meets MUTCD Standards Constructed of orange waterproof nylon Internal light has two settings: steady burn and flashing Cone light endures 100,000 flashes or 36 hours of steady burn Collapses flat for easy storage Replaceable lithium battery Sold in packs of 4 with one carrying bag included Carrying bag not sold separately
3012917 3012918
PACK & POP 28” INCIDENT SAFETY CONE W/LIGHT PACK & POP 18” INCIDENT SAFETY CONE W/LIGHT
CuStoM iMprintinG for ConeS
IMPRINTING AND SILK SCREENING ARE AVAILABLE FOR ALL CONES. 50 CONE MINIMUM ORDER. LEAD TIME REQUIRED. REFER TO ALLSAFE SERVICES & MATERIALS DISTRIBUTOR PRICE LIST FOR SET-UP FEES AND CHARGES. ONLY AVAILABLE IN BLACK INK.
StenCiLinG: STENCILING AVAILABLE FOR BOTH THE OUTSIDE OF THE CONE AND THE INSIDE LINER. ONE-TIME STENCIL SET-UP FEE APPLIES. PER CONE ADDITIONAL CHARGE APPLIES FOR INNER AND OUTER STENCIL. STANDARD LEGENDS FOR IMPRINTED CONES REQUIRE NO SET-UP CHARGE AND INCLUDE THE FOLLOWING: WET FLOOR, CAUTION, DANGER, KEEP OUT, NO PARKING, NO SMOKING.
SiLk SCreen: SILK SCREEN AVAILABLE ON THE OUTSIDE OF CONE ONLY. FILM CHARGE APPLIES FOR SILK SCREEN. CAMERAREADY ARTWORK MUST BE PROVIDED FOR ALL SILK SCREENS. CAMERA-READY ARTWORK IS DEFINED AS “DIGITAL FORM, 1-BIT FORMAT, TRUE BLACK AND WHITE (NO GRAYSCALE). IMAGE MUST BE THE SAME SIZE FOR THE GRAPHIC/LEGEND TO BE PRINTED.”
CuStoM iMprintS: AvAiLAbLe SpACe WITHOUT COLLARS: 5" W X 10" H 10" W X 18" H 11" W X 22" H
CONES 18" 28" 36"
WITH COLLARS: 5" W X 6" H 10" W X 9" H 11" W X 17" H
*Must be purchased in multiples of 20 for 6” cones, 20 for 12” cones, 10 for 18” cones, 10 for 28” cones and 8 for 36” cones.
trAffiC SAfety
neW
CONES 18" 28" 36"
47
TRAFFIC SAFETY NEW MATERIAL NUMBER
OLD MATERIAL MATERIAL NUMBER DESCRIPTION
www.jacksonsafety.com BASE WIDTH BASE LENGTH UNIT WEIGHT PALLET QTY (inches) (inches) (lbs) (units)
3004101
00100680
DW CONE - 6”
8
8
1.5
500
3004020
00100032
DW CONE - 12”
8
8
1.5
500
3004023
00100109
DW CONE - 18”
10.75
10.75
3
500
3004319
02215283
DW CONE - 18” W/6” UPPER 3M
11
11
3
500
3004282
N/A
DW CONE - 18” W/6” UPPER REFLX
11
11
3
500
3004057
00100355
DW CONE - 28”
14
14
7
250
3004236
02193643
DW CONE - 28” W/6” UPPER 4” LOWER 3M
14
14
7
250
3004206
N/A
DW CONE - 28” W/6”UPPER 4” LOWER REFLX
14
14
7
250
3004176
02058647
DW CONE - 28”
14
14
10
200
3004256
02202353
DW CONE - 28” W/6” UPPER 4” LOWER 3M
14
14
10
200
3008293
N/A
DW CONE - 28” W/6” UPPER 4” LOWER REFLX
14
14
10
200
3004059
0100408
DW CONE - 28” FLAGTOP
14
14
7
250
3004159
02058116
DW CONE - 36”
14
14
10
150
3004231
02193631
DW CONE - 36” W/6” UPPER 4” LOWER 3M
14
14
10
150
3007315
N/A
DW CONE - 36” W/6” UPPER 4” LOWER REFLX
14
14
10
150
3004226
02089926
DW CONE - 36”
14
14
12
150
3008765
2206763
DW CONE - 36” O/H ST FL- W1561
14
14
12
150
3004243
02196839
DW CONE - 36” W/6” UPPER 4” LOWER REF
14
14
12
150
3004019
00100006
W CONE - 12”
9
9
2
500
3004042
00100238
W CONE - 18”
10.75
10.75
2.5
500
3004043
N/A
W CONE - 18” W/4” UPPER REFLX
10.75
10.75
2.5
500
3004370
N/A
W CONE - 18” W/6” UPPER 3M
10.75
10.75
2.5
500
3004607
N/A
W CONE - 18” W/6” UPPER REFLX
10.75
10.75
2.5
500
3004158
02058087
W CONE - 28”
14.5
14.5
6.5
250
3004245
02196970
W CONE - 28” W/6” UPPER 4” LOWER 3M
14.5
14.5
6.5
250
3004242
N/A
W CONE - 28” W/6” UPPER 4” LOWER REFLX
14.5
14.5
6.5
250
3004181
02068000
W CONE - 28”
14.5
14.5
7
250
3004183
02068002
W CONE - 28” W/ 6”UPPER 4”LOWER 3M
14.5
14.5
7
250
3007415
N/A
W CONE - 28” W/6” UPPER 4” LOWER REFLX
14.5
14.5
7
250
3004175
02058635
W CONE - 28”
14.5
14.5
10
200
3004259
N/A
W CONE - 28” W/6” UPPER 4” LOWER 3M
14.5
14.5
10
200
3004258
N/A
W CONE - 28” W/6”UPPER 4” LOWER REFLX
14.5
14.5
10
200
3004160
02058130
W CONE - 36”
14.5
14.5
10
150
3004272
02202432
W CONE - 36” W/ 6”UPPER 4”LOWER 3M
14.5
14.5
10
150
3008307
N/A
W CONE - 36” W/ 6”UPPER 4”LOWER REFLX
14.5
14.5
10
150
3004278
02202468
W CONE - 36”
14.5
14.5
12
150
3004301
02214875
W CONE - 36” FL-W1565
14.5
14.5
12
150
3004280
02202482
W CONE - 36” W/ 6”UPPER 4”LOWER 3M
14.5
14.5
12
150
3004279
N/A
W CONE - 36” W/ 6”UPPER 4”LOWER REFLX
14.5
14.5
12
150
3004298
02214863
W CONE - 36” FL-W1564 W/ 6”UPPER 4”LOWER
14.5
14.5
12
150
3004299
02214865
W CONE - 36” FL-W1564 W/ 6”UPPER 4”LOWER 3M
14.5
14.5
12
150
3004604
02069001
W CONE - 28” RECESSED COLLAR W/ 6”UPPER 4”LOWER
14.5
14.5
7
250
3004283
02212126
W CONE - 18” FLUORESCENT LIME
10.75
10.75
2.5
500
3004286
02212138
W CONE - 28” FLUORESCENT LIME
14.5
14.5
6.5
250
3004288
02212152
W CONE - 28” FLUORES. LIME W/6”UPPER 4”LOWER
14.5
14.5
6.5
250
3004297
02214540
W CONE - 28” FLUORES. LIME W/6”UPPER 4”LOWER 3M
14.5
14.5
6.5
250
3004287
02212140
W CONE - 36” FLUORESCENT LIME
14.5
14.5
10
150
3004290
02212164
W CONE - 36” FLUORES. LIME W/6”UPPER 4”LOWER
14.5
14.5
10
150
3004034
0100185
FL CONE - 18”
10
10
2.4
500
3004322
02215611
FL CONE - 18” W/4”COLLAR 3M
10
10
2.4
500
3004315
N/A
FL CONE - 18” W/4” COLLAR REFLX
10
10
2.4
500
3009162
N/A
FL CONE - 18” W/6” COLLAR 3M
10
10
2.4
500
3004317
N/A
FL CONE - 18” W/6” COLLAR REFLX
10
10
2.4
500
3004071
00100484
FL CONE - 28”
13
13
5.5
250
3004251
02197388
FL CONE - 28” W/6”UPPER 4”LOWER 3M
13
13
5.5
250
3010108
N/A
FL CONE - 28” W/6” UPPER 4” LOWER REFLX
13
13
5.5
250
3004085
00100604
FL CONE - 36”
13
13
8
150
3004277
02202456
FL CONE - 36” W/6”UPPER 4”LOWER 3M
13
13
5.5
150
3004275
N/A
FL CONE - 36” W/6”UPPER 4”LOWER REFLX
13
13
5.5
150
3004094
00100666
W CONE - 4”
3.5
3.5
.38
N/A
3004179
02058659
F CONE - 28”
14.5
14.5
10
200
3004252
02197390
F CONE - 28” W/6”UPPER 4”LOWER3M
14.5
14.5
10
200
3004262
N/A
F CONE - 28” W/6”UPPER 4”LOWER REFLX
14.5
14.5
10
200
DW: wide body/black base • W: wide body/orange base • FL: slim line/orange base • F: slim line/larger orange base
SMC ™
Customer Service 1-800-428-8185
49
A DIVISION OF JACKSON SAFETY
Sport ConeS
• Ideal for sporting events, parking lots, festivals and temporary (off highway) traffic delineation
• Made from lightweight and durable injection-molded polyethylene • Available in 18” with 12” x 12” base (orange also available in 12” size) • Sold in standard packs of 40 cones for 12” and 25 cones for 18” 3001764 3001766 3001765 3001767
2027193 2027210 2027208 2027222
18” RED SPORT CONE 18” BLUE SPORT CONE 18” YELLOW SPORT CONE 18” WHITE SPORT CONE
Cone hoLder
3004153 0110130 3004154 0110142
3001749
2008733 2027753 2008721
18” ORANGE SPORT CONE 18” GREEN SPORT CONE 12” ORANGE SPORT CONE
Cone CLip
• Prevents cones from blowing over • Holds approximately (10) 18” cones • Attaches barrier tape to traffic cones • Octagon-shaped stabilizer provides or (5) 28” cones or delineators easy placement over cone • For 18” and 28” cones only • Fits all sizes and types of traffic • Mounting plate is 6.75” wide cones • Height of unit = 22” from bottom of • Weight: 5 lbs. mounting plate to top of holder 9 1/2" HOLE, F & FL CONES 11" HOLE, W & DW CONES
0116976 CONE HOLDER
3006643 0116847 CONE BARRIER TAPE CLIP
Cones sold separately
bArriCone SySteM
MiCroLite fLAShinG Cone LiGht
• Attaches to 28” or 36” wide body traffic cones • Mounts to any style 18”, 28” or 36” traffic cone • Offered in 4ft and 6ft lengths with a width of four inches • Available in yellow case with 360o amber or red lens. • Panels are manufactured of bright yellow PVC plastic Mounting bracket included. (Call customer service for with yellow steel rings inserted into each end
• Designed to nest together for compact storage • Offered in both reflective and non-reflective. Reflective •
4 ft. model utilizes two 3”x12” engineer grade barricade strips. Reflective 6ft with two 3”x24” strips. On both styles, the reflective strip offset the word “CAUTION” Temperature range of up to 140 degrees to -40 degreesF
3007963 3007965 3007964 3007966
2191932 2191956 2191944 2191968
BARRICONE BARRICONE BARRICONE BARRICONE
4 4 6 6
FT. YELLOW FT. YELLOW FT. YELLOW FT. YELLOW
- PLAIN “CAUTION” W/ REFLECTIVE - PLAIN “CAUTION” W/ REFLECTIVE
ordering information for red lens)
• Features 6 volt flashing or 6 volt flashing with photo cell circuitry
• Powered by single 6V lantern battery (not included) • Flash rate of 120 - 150 flashes per minute • Dimensions: 8” high x 3-1/4” diameter
3007647 3007533 3007279 3001752
2095594 2083173 2033192 0118144
6V 6V 6V 6V
FLASHING MICROLITE WITH PHOTOCELL – AMBER LENS FLASHING MICROLITE – AMBER LENS MICROLITE REPLACEMENT BULB #1850 MICROLITE LANTERN BATTERY (SPRING TYPE)
trAffiC SAfety
Cone StAbiLizer
3001761 3001768 3001760
TRAFFIC SAFETY
www.jacksonsafety.com
road signs
(other legends available)
standard signs
• Available in 1-2 business days
SPECIALITY signs • Available in 5-7 business days
Custom Imprinting For Signs Order special legends for your Roll-Up Signs for an additional fee. Please allow 2-3 weeks lead time for initial orders. Contact customer service for pricing and ordering information. Film charge and minimum order quantity applies.
YOUR DESIGN, YOUR LOGO, YOUR MESSAGE, ...OUR PLEASURE.
SMC ™
Customer Service 1-800-428-8185
51
A DIVISION OF JACKSON SAFETY
Reflective roll-up signs
• Fluorescent roll-up signs that convert non-visible ultra-violet energy into visible light are being used in increasing numbers in traffic control •
work zones. Fluorescent materials are most effective between dusk and dawn, when natural sources of illumination are reduced. Both Reflexite super bright and 3M Diamond Grade sign materials qualify as fluorescent reflective roll-up signs. Silk screened legend and border ** NOTE Roll-up signs do not include sign ribs. See page 26 for available options.
fluorescent orange super bright
• Fluorescent orange color provides maximum visibility • Fluorescent orange microprismatic sheeting increases legibility and provides higher retroreflective performance • Features vinyl-coated nylon pocket design. Lexan pockets available upon request at additional cost
3008408 3008410 3008400 3008411 3008413 3009113 3008418 3008401 3008414 3008423 3008816 3008381
2203503 be prepared to stop 2203527 detour ahead 2203450 Flagger ahead 2203462 Flagger symbol 2203515 construction ahead 2203668 merge right 2203670 merge right symbol 2203682 merge left symbol 2203486 men working 2203498 men working symbol 2203539 mowing ahead 2203553 right lane closed ahead 2203541 one lane road ahead 2203618 right shoulder closed 2203589 road closed ahead 2203591 road construction
ahead 2203606 road work ahead 2203620 shoulder work ahead 2203565 signal work ahead 2203632 slow 2203644 survey crew 2216469 survey crew Ahead 2203694 utility work Ahead 2203577 work area Ahead 2203656 workers Ahead 2203709 fresh oil 2211043 end road work 2203517 trucks entering highway
48” 3008452 3008463 3008424 3008431 3008459 3008493 3008492 3008494 3008456 3008445 3008450 3008466 3008469 3008468 3008483 3008475 3008478
2203761 be prepared to stop 2203785 detour ahead 2203711 Flagger ahead 2203723 Flagger symbol 2203773 construction ahead 2203931 merge right 2203929 merge right symbol 2203943 merge left symbol 2203768 be prepared to stop 2203747 men working 2203759 men working symbol 2203797 mowing ahead 2203814 right lane closed ahead 2203802 one lane road ahead 2203876 right shoulder closed 2203840 road closed ahead 2203852 road construction
3008479 3008486 3008472 3008487 3008488 3008489 3008498 3008474 3008491 3008440 3008500 3008811
2203864 road work ahead 2203888 shoulder work ahead 2203826 signal work ahead 2203890 slow 2203905 survey crew 2203906 survey crew Ahead 2203955 utility work Ahead 2203838 work area Ahead 2203917 workers Ahead 2203735 paddle symbol 2203967 fresh oil 2210996 end road work
ahead
3m fluorescent diamond grade
3008458 2203771 trucks entering highway sign overlays 36” 3008689 2205549 Left 3008694 2205575 center 3008696 2205599 one 3008698 2205616 blank 3008701 2205630 directional arrow 3008713 2205654 500 ft 3008715 2205678 1000 ft 3008717 2205692 1500 ft 3008720 2205719 1/2 mile 3008722 2205733 1 mile 48” 3008691 3008695 3008697 3008700 3008712 3008714 3008716 3008718 3008721 3008723
2205551 left 2205587 center 2205604 one 2205628 blank 2205642 directional arrow 2205666 500 ft 2205680 1000 ft 2205707 1500 ft 2205721 1/2 mile 2205745 1 mile
3M
• F luorescent orange color provides maximum visibility • Offers increased angularity for enhanced nighttime performance • Features vinyl-coated nylon pocket design. Lexan pockets available upon request at additional cost 36” 3008513 2204026 be prepared to stop 3008515 2204040 detour ahead 3008502 2203979 Flagger ahead 3008503 2203981 Flagger symbol 3008514 2204038 construction ahead 3008535 2204181 merge right 3008536 2204193 merge right symbol 3008509 2204002 men working 3008510 2204014 men working symbol 3008516 2204052 mowing ahead 3008518 2204076 right lane closed ahead 3008517 2204064 one lane road ahead 3008529 2204131 right shoulder closed 3008523 2204105 road closed ahead 3008526 2204117 road construction 3008530 3008520 3008531 3008532 3008533 3008537 3008521 3008534 3008538 3008818 3008809
ahead 2204143 SHOULDER WORK AHEAD 2204088 sIGNAL work ahead 2204155 slow 2204167 survey crew 2204168 survey crew Ahead 2204210 utility work Ahead 2204090 work area Ahead 2204179 workers Ahead 2204222 fresh oil 2211067 end road work 2210960 No legend
48” 3008563 3008567 3008539 3008543 3008566 3008599 3008603 3008606 3008546 3008555 3008568 3008573 3008572 3008586 3008580 3008582 3008583 3008588 3008577 3008592 3008595 3008813 3008609 3008578 3008596 3008544 3008610
2204284 be prepared to stop 2204301 detour ahead 2204234 Flagger ahead 2204246 Flagger symbol 2204296 construction ahead 2204442 merge right 2204454 merge right symbol 2204466 merge left symbol 2204260 men working 2204272 men working symbol 2204313 mowing ahead 2204337 right lane closed ahead 2204325 one lane road ahead 2204399 right shoulder closed 2204363 road closed ahead 2204375 road construction ahead 2204387 road work ahead 2204404 shoulder work ahead 2204349 signal work ahead 2204416 slow 2204428 survey crew 2211018 survey crew Ahead 2204478 utility work Ahead 2204351 work area Ahead 2204430 workers Ahead 2204258 paddle symbol 2204480 fresh oil
3008812 2211017 end road work 3008804 2210910 no legend 3008545 2204259 trucks entering highway
sign overlays 36” 3008725 2205757 Left 3008727 2205771 center 3008729 2205795 one 3008731 2205812 blank 3008733 2205836 directional arrow 3008735 2205850 500 ft 3008737 2205874 1000 ft 48” 3008726 3008728 3008730 3008732 3008734 3008736 3008738 3008739 3008740 3008743
2205769 left 2205783 center 2205800 one 2205824 blank 2205848 directional arrow 2205862 500 ft 2205886 1000 ft 2205903 1500 ft 2205927 1/2 mile 2205941 1 mile
TR A FFI C S A FETY
36” 3008372 3008385 3008352 3008358 3008380 3008415 3008416 3008417 3008364 3008367 3008391 3008398 3008392 3008409 3008404 3008405
TRAFFIC SAFETY
www.jacksonsafety.com
NON Reflective roll-up signs ks single ply • • • •
Fabricated from single ply, vinyl-coated nylon mesh with vinyl bound edges for greater durability Brilliant red/orange color provides excellent visibility Legends and borders are heat sealed using black vinyl material Features vinyl-coated nylon pocket design. Lexan pockets available upon request at additional cost
36” 3008199 3008200 3006295 3006317 3006297 3008208 3007460 3007461 3007385 3006296 3008201 3008226 3008202 3008204 3007386 3006300 3006322 3008205 3008203 3008206 3006328 3006334 3006336 3006306 3008207 3008198 3008209
2200173 be prepared to stop 2200185 detour ahead 0107028 Flagger ahead 0107080 Flagger symbol 0107042 construction ahead 2200264 merge right 2078594 merge right symbol 2078609 merge left symbol 2060248 men working 0107030 men working symbol 2200197 mowing ahead 2200410 right lane closed ahead 2200202 one lane road ahead 2200226 right shoulder closed 2060250 road closed ahead 0107054 road construction ahead 0107092 road work ahead 2200238 shoulder work ahead 2200214 signal work ahead 2200240 slow 0107133 survey crew AHEAD 0107145 survey crew 0107171 utility work Ahead 0107066 work area Ahead 2200252 workers Ahead 2200161 paddle symbol 2200276 fresh oil
3009203 2219382 end road work 3006299 0107049 trucks entering highway 48” 3008211 3008212 3006341 3006365 3006346 3008223 3007462 3007463 3006339 3006343 3008213 3008216 3008214 3008218 3007389 3006353 3006368 3008219 3008217 3008221 3006384 3006387 3006389 3006359
2200290 be prepared to stop 2200305 detour ahead 0107200 Flagger ahead 0107262 Flagger symbol 0107224 construction ahead 2200393 merge right 2078611 merge right symbol 2078623 merge left symbol 0107195 men working 0107212 men working symbol 2200317 mowing ahead 2200331 right lane closed ahead 2200329 one lane road ahead 2200355 right shoulder closed 2061773 road closed ahead 0107236 road construction ahead 0107274 road work ahead 2200367 shoulder work ahead 2200343 signal work ahead 2200379 slow 0107315 survey crew 0107327 survey crew Ahead 0107353 utility work Ahead 0107248 work area Ahead
3008222 2200381 workers Ahead 3008210 2200288 paddle symbol 3008224 2200408 fresh oil 3006362 2219930 end road work 3009106 2216251 trucks entering highway sign overlays 36” 3008634 2204741 Left 3008638 2204765 center 3008643 2204789 one 3008645 2204806 blank 3008647 2204820 directional arrow 3008650 2204844 500 ft 3008652 2204868 1000 ft 3008654 2204882 1500 ft 3008656 2204909 1/2 mile 3008658 2204923 1 mile 48” 3008637 2204753 left 3008642 2204777 center 3008644 2204791 one 3008646 2204818 blank 3008648 2204832 directional arrow 3008651 2204856 500 ft 3008653 2204870 1000 ft 3008655 2204894 1500 ft 3008657 2204911 1/2 mile 3008659 2204935 1 mile
ks double ply • • • •
Constructed with two layers of heavy duty, double knit, nylon mesh material Brilliant red/orange color provides excellent visibility Legends and borders are heat sealed using black vinyl material Features vinyl-coated nylon pocket design. Lexan pockets available upon request at additional cost
36” 3008227 3008228 3006398 3006410 3006402 3008238 3007464 3007466 3007383 3006400 3008229 3008231 3008230 3008234 3007384 3006405 3006412 3008235 3008233 3008236 3006427 3006436 3006460 3006406 3008237 3008256 3008239 3007919 3009198
2200422 be prepared to stop 2200434 detour ahead 0107561 Flagger ahead 0107626 Flagger symbol 0107585 construction ahead 2200525 merge right 2078659 merge right symbol 2078661 merge left symbol 2060121 men working 0107573 men working symbol 2200446 mowing ahead 2200460 right lane closed ahead 2200458 one lane road ahead 2200484 right shoulder closed 2060133 road closed ahead 0107597 road construction ahead 0107638 road work ahead 2200496 shoulder work ahead 2200472 signal work ahead 2200501 slow 0107676 survey crew 0107688 survey crew Ahead 0107717 utility work Ahead 0107602 work area Ahead 2200513 workers Ahead 2200680 paddle symbol 2200537 fresh oil 2187280 end road work 2219124 trucks entering highway
48” 3008241 3008242 3006467 3006479 3006473 3008254 3007468 3007469 3006464 3006470 3008243 3008246 3008244 3008250 3008248 3006477 3006480 3008251 3008247 3008252 3006494 3006495 3007387 3006478 3008253 3008240 3008255 3007918 3009189
2200551 be prepared to stop 2200563 detour ahead 0107743 Flagger ahead 0107808 Flagger symbol 0107767 construction ahead 2200666 merge right 2078673 merge right symbol 2078685 merge left symbol 0107731 men working 0107755 men working symbol 2200575 mowing ahead 2200599 right lane closed ahead 2200587 one lane road ahead 2200628 right shoulder closed 2200616 road closed ahead 0107779 road construction ahead 0107810 road work ahead 2200630 shoulder work ahead 2200604 signal work ahead 2200642 slow 0107858 survey crew 0107860 survey crew Ahead 2061761 utility work Ahead 0107781 work area Ahead 2200654 workers Ahead 2200549 paddle symbol 2200678 fresh oil 2187278 end road work 2218637 trucks entering highway
sign overlays 36” 3008634 2204741 Left 3008638 2204765 center 3008643 2204789 one 3008645 2204806 blank 3008647 2204820 directional arrow 3008650 2204844 500 ft 3008652 2204868 1000 ft 3008654 2204882 1500 ft 3008656 2204909 1/2 mile 3008658 2204923 1 mile 48” 3008637 3008642 3008644 3008646 3008648 3008651 3008653 3008655 3008657 3008659
2204753 left 2204777 center 2204791 one 2204818 blank 2204832 directional arrow 2204856 500 ft 2204870 1000 ft 2204894 1500 ft 2204911 1/2 mile 2204935 1 mile
SMC ™
Customer Service 1-800-428-8185
53
A DIVISION OF JACKSON SAFETY
NON Reflective roll-up signs vs mesh • • • •
anufactured from tightly woven polyester mesh fabric M Specially formulated PVC foam extruded over polyester yarn for a roll-up panel at a very competitive price Features vinyl-coated nylon pocket design. Lexan pockets available upon request at additional cost Silk screened legends and borders 2200707 be prepared to stop 2200719 detour ahead 0108101 Flagger ahead 0108163 Flagger symbol 0108125 construction ahead 2200812 merge right 2078726 merge right symbol 2200824 merge left symbol 0108096 men working 0108113 men working symbol 2200721 mowing ahead 2200745 right lane closed ahead 2200733 one lane road ahead 2200771 right shoulder closed 2069660 road closed ahead 0108137 road construction ahead 0108175 road work ahead 2200783 shoulder work ahead 2200757 signal work ahead 2200795 slow 0108216 survey crew 0108228 survey crew Ahead 0108254 utility work Ahead 0108149 work area Ahead 2200800 workers Ahead 2200692 paddle symbol 2200836 fresh oil 2211031 end road work 2210635 trucks entering highway
48” 3008273 3008274 3006544 3006568 3006555 3008285 3007471 3007472 3006543 3006547 3008275 3008278 3008277 3008280 3007347 3006562 3006569 3008282 3008279 3008283 3006574 3006576 3006579 3006563 3008284 3008272 3008286 3008810
2200850 be prepared to stop 2200862 detour ahead 0108280 Flagger ahead 0108345 Flagger symbol 0108307 construction ahead 2200953 merge right 2078738 merge right symbol 2078740 merge left symbol 0108278 men working 0108292 men working symbol 2200874 mowing ahead 2200898 right lane closed ahead 2200886 one lane road ahead 2200915 right shoulder closed 2058207 road closed ahead 0108319 road construction ahead 0108357 road work ahead 2200927 shoulder work ahead 2200903 signal work ahead 2200939 slow 0108395 survey crew 0108400 survey crew Ahead 0108438 utility work Ahead w/velcro 0108321 work area Ahead 2200941 workers Ahead 2200848 paddle symbol 2200965 fresh oil 2210984 end road work
3008797 2210647 trucks entering highway 3012772 500 ft 3012774 1000 ft 3012775 1500 ft sign overlays 36” 3008661 2204947 Left 3008663 2204961 center 3008665 2204985 one 3008667 2205006 blank 3008669 2205020 directional arrow 3008671 2205044 500 ft 3008673 2205068 1000 ft 3008675 2205082 1500 ft 3008678 2205123 1 mile 48” 3008662 3008664 3008666 3008668 3008670 3008672 3008674 3008676 3008677 3008679
2204959 left 2204973 center 2204997 one 2205018 blank 2205032 directional arrow 2205056 500 ft 2205070 1000 ft 2205094 1500 ft 2205111 1/2 mile 2205135 1 mile
fiberglass roll up sign ribs
• All fiberglass ribs are coated with a “polyester veil coating” that reduces splinters and cracking
• Available for 36” and 48” roll-up signs
vinyl pockets for sign ribs. Lexan pockets also available.
fiberglass ribs for Quadra Flex V™ 3006667 0118388 sign stand ribs & hardware for 36” roll-up signs 3006183 0101725 sign stand ribs & hardware for 48” roll-up signs fiberglass ribs (USE FOR QLV, SCREWLOCK STANDS, & UNISPRING) 2004580 2080377 riblock set 36” 2004581 2080389 riblock set 48” Standard fiberglass ribs (use for a-frame, tri-pod & t-stand) 3006684 0118936 ribs for 36” roll-up signs (a-frame & t-stand signs) 3006685 0118948 ribs for 48” roll-up signs (a-frame & t-stand signs)
quadra flex v kits • • • • • • • •
Spring-loaded QFV sign stands display 36” and 48” roll-up panels a minimum of 14” off the ground Patented spring design incorporates anti-rotational device and positive stops to prevent spring over-stress Exclusive base, spring and leg design eliminates the need for sandbags and absorbs winds up to 50 mph Unique kick lock release lever allows easy leg unfolding and adjusting to uneven terrain Durable, lightweight and corrosion-resistant aluminum legs provide longer service life and easier handling without sacrificing strength Quick lock mast allows for easy panel set-up/take-down. Velcro strap-on mast prevents panel from windmilling when wrapped around vertical fiberglass rib Four steel L-shaped brackets reinforce legs to base. Telescoping aluminum legs provide maximum stability Kits include: Base, Mast, Ribs and Flags
3007536 3007535 3006686 3006172 3006174 3006173
2083673 2083660 0119045 0101490 0101517 0101505
Quadra Flex Quadra Flex Quadra Flex Quadra Flex Quadra Flex Quadra Flex
v™ v™ v™ v™ v™ v™
kit for 36” sign kit for 48” sign base base & mast for 48” roll-up sign base & telescoping mast 60 (base & mast only)
3006184 3006185 3006186 3007381
0101763 Quadra Flex v™ mast for 36” roll-up sign 0101775 Quadra Flex v™ mast for 48” roll-up sign 0101787 Quadra Flex v™ telescoping mast 2059665 adapter for rigid and semi-rigid signs
TR A FFI C S A FETY
36” 3008258 3008259 3006522 3006532 3006528 3008269 3007470 3008270 3006521 3006524 3008260 3008262 3008261 3008265 3007435 3006529 3006533 3008266 3008263 3008267 3006536 3006538 3006540 3006531 3008268 3008257 3008271 3008815 3008796
TRAFFIC SAFETY
www.jacksonsafety.com
Kits include base, ribs, flag adaptor and flags
qfv-w screwlock
qlv-w screwlock
• NCHRP-350 Certified • NCHRP-350 Certified • Spring-loaded QFV sign stands display 36” and 48” roll-up panels a • A llows the user to hold virtually any fiberglass rib sign panel without minimum of 14” off the ground
adaptation or retrofit
• Patented spring design incorporates anti-rotational device and
• Vertical panel rib slips into “J” channel bracket and is held securely
• Exclusive base, spring and leg design eliminates the need for
• S ign stand displays 36” and 48” roll-up panels 14” off the ground • Fold-down telescoping legs using kicklock release levers. Legs
positive stops to prevent spring over-stress
in place by swivel pad and threaded shaft
sandbags and absorbs winds up to 50 mph
• Unique kicklock release lever allows easy leg unfolding and • •
adjusting to uneven terrain Allows the user to hold virtually any fiberglass rib sign panel without adaptation or retrofit Vertical panel rib slips into “J” channel bracket and is held securely in place by swivel pad and threaded shaft
3007816 2180191 3008789 2210374 3008790 2210386
longer service life and easier handling without sacrificing strength. Four steel L-shaped brackets reinforce legs and base
3007814 2180177 3008152 2198124 3008153 2198136
QFv-w screwlock™ (base only) QFv-w screwlock™ kit for 36” roll-up signs QFv-w screwlock™ kit for 48” roll-up signs
QFV-84 sign stand
adjust for uneven terrain
• Durable, lightweight and corrosion-resistant aluminum legs provide
Dynaflex 4000
Qlv-w screwlock™ (base only) Qlv-w screwlock™ kit for 36” roll-up signs Qlv-w screwlock™ kit for 48” roll-up signs
Twin Flex 60
• NCHRP-350 Certified • NCHRP-350 Compatible with a roll- • NCHRP-350 Compatible with roll-up • Displays 48” roll-up signs 7 feet off up sign panel. OR rigid sign panels the ground • Roll-up panel bracket allows for a • Two vertical steel coil springs • System includes base assembly quick switch to 36” or 48” roll-up • Minimum height from ground to •
with wind relieving springs and twostage mast with sign panel holder Legs feature a locking pin with spring-loaded release device for quick set-up and take-down operations
3008819 2211134
QFv-84 Base & MAst
sign
bottom of panel: 60”
• Dual torsion spring system absorbs • Closed storage dimensions: • • • •
winds up to 50 mph Open footprint: 90”x52”, Leg length: 54.5” Weight: 29 lbs Storage height: 54.5”
3007815 0119077
DF4000 sign stand
Unispring™ 2000 sign • • • • • • •
12”x10”x92”
• Open footprint: 74”x135” • Weight: 48 lbs
3009779 0101877
TF60 sign stand
NCHRP-350 Certified Complies with MUTCD standards Features versatile, compact single-coil spring Ease of use with fast kick release system, locking legs into place when fully extended Displays 36” and 48” reflective roll-up signs using ScrewLock™ attachment All aluminum and steel construction Telescoping aluminum legs with two position height adjustment and anti-skid foot pads. Minimum height from ground to bottom panel: 12” (305 mm)
3006176 0101568 unispring 2000 sign stand
SMC ™
Customer Service 1-800-428-8185
55
A DIVISION OF JACKSON SAFETY
emergency response FOLD & ROLL™
• Utilizes a compact design for minimal storage space making it
easy to transport to and from the work site or emergency scene
• Quick and easy set-up allows work crews and first responders to • • • • • • • • •
be productive and safe NCHRP-350 compatible and MUTCD compliant All aluminum and steel construction Sign made from fluorescent pink coral material Telescoping aluminum legs with two position height adjustments and anti-skid foot pads Kick release system for quick leg deployment Dual torsion springs to withstand wind resistance Full extension length: 51” each leg Open footprint: 92”x 57.5” Displays 48” sign with Quick-Locking Stablock™ Sign Holding System
3007274 3009813 3009814 3009815
2031054 2031056 2031057 2031058
F&R SIGN KIT “EMERGENCY SCENE AHEAD” F&R SIGN KIT “ACCIDENT AHEAD” F&R SIGN KIT “TRAFFIC EMERGENCY AHEAD” F&R SIGN CARRYING CASE
• Meets NCHRP-350 requirements with roll-up sign • Displays 36” and 48” roll-up or rigid panels without special adaptors
• Fabricated from durable, galvanized mechanical tubing • Strong, lightweight design allows for easy set-up and take-down
“T” stand T-stand Roll-Up/Rigid Tripod Sign Stand
• Made of galvanized steel and built in plastic coated spring clips to accommodate roll-up signs up to 48”
3007719 2173227 TRI-POD STAND FOR ROLL UP AND RIGID 3006179 0101581 SIGN STAND RIGID TS-R
folding flag system
• Complete roll-up sign brace system utilizes two 18” vinyl warning flags permanently mounted to fiberglass ribs
• T o deploy, rotate fiberglass ribs upwards Slide white plastic ring down to lock in place • Works with QFV-W Screwlock™ or QLV-W Screwlock™ sign stand bases • Available for 36” or 48” roll-up signs with vinyl or Lexan pockets Sign Cases 3006587 0108981 roll-up sign case 36” sign 3006588 0109002 roll-up sign case 48” sign Special adapter 3006181 0101646 rib set for 36” roll-up signs with special clamp 3006182 0101658 rib set for 48” roll-up signs with special clamp 3006189 0101830 special clamp only for roll-up signs Misc. stand replacement parts 3007301 2057564 replacement spring for a-frame stand (48” sign) 3006180 0101608 sign stand clip for a-frame stand (48” sign) 3006188 0101799 latch for a-frame stand (36” sign) 3007454 2072203 latch for a-frame stand (48” sign)
folding flag system 3008119 2195471 folding flag system for 36” sign 3008101 2195342 folding flag system for 48” sign 3006178 0101579 a-frame roll-up sign stand 36” signs
(while supplies last) 3006175 0101567 a-frame roll-up sign stand 48” signs (while supplies last) 3006179 0101581 t-stand roll-up sign stand 3007518 2082146 flag adapter for 3 flags 3006664 0118261 rigid sign stand adapter for roll-up signs on qfvr 3006665 0118263 sign stand bracket for QFv-60, qfv-84, slip-60
TR A FFI C S A FETY
roll-up/rigid tripod sign stand
TRAFFIC SAFETY
www.jacksonsafety.com
A.
A.
B.
A. ABS paddles (Plastic)
B. NON-REFLECTIVE anodized paddles (Aluminum)
• Meets MUTCD requirements • Octagon shape • Paddles available silk screened or reflectorized with • • • • •
• Aluminum silk-screened octagon shaped paddles in 15” or 18” size
Engineer Grade, Hi-Intensity or Diamond Grade sheeting Letter Size: 8” in 24” paddle size, 6” in 18” paddle size Staff and couplings sold separately PVC handle: Short 14” / Long 61” adapter Wood handle: 6’ to bottom of sign Aluminum handle: 5-3/16” to bottom of sign
• .080 gauge baked aluminum enamel. Available with 6” aluminum, 6” wooden or 6’ wooden handles
• Ideal for school crossing guards, flaggers, and plant security guards
• Wood handle: 6.5” Short / 6’ Long, 7-1/8” to bottom of sign • Aluminum handle 5 3/16”, 14-7/8” to bottom of sign
Sign Only: STOP/SLOW 18” 3007366 2058740 stOP/SLOW Pdl, 18” non-reflective 3007364 2058738 stOP/SLOW Pdl, 18” eNGINEER grade 3007393 2062399 stOP/SLOW Pdl, 18” hi-intensity 3007928 2188571 stOP/SLOW Pdl, 18” diamond grade STOP/SLOW 24” 3007368 2058776 stOP/slOW Pdl, 24” non-reflective 3007370 2058788 stOP/SLOW Pdl, 24” eNGINEER grade 3007395 2062416 stOP/SLOW Pdl, 24” hi-intensity 3007930 2188583 stOP/SLOW Pdl, 24” diamond grade
Sign Only: STOP/SLOW 3006224 0103474 stop/slow pdl, 15” NON-REFLECTIVE 3006225 0103486 stop/sLOW pdl, 18” NON-REFLECTIVE STOP/STOP 3006228 0103541 stop/sTOP pdl, 18” NON-REFLECTIVE 3006678 0118821 stop/stop pdl, 15” NON-REFLECTIVE Aluminum Sign Assembly Kits (Staff and Couplings): STOP/SLOW 3007351 2058386 stop/slow PDL, 15” (aluminum handle) 3007352 2058398 stop/slow PDL, 15” (wood handle) 3007353 2058403 stop/slow PDL, 18” (aluminum handle) 3007354 2058415 stop/slow PDL, 18” (wood handle) 3007641 2094255 stop/slow PDL, 18” (6’ wood handle) STOP/STOP 3007355 2058556 stop/stop PDL, 15” (aluminum handle) 3007356 2058570 stop/stop PDL, 18” (aluminum handle)
Plastic Sign Assembly Kits (Staff and Couplings): STOP/SLOW 18” 3007771 2177572 stop/slow Pdl, 18” non-reflective, abs plastic 3007774
handles (assembly)
2177675 stop/slow Pdl, 18” reflect, abs plastic handles
(assembly)
3007769 2177534 stop/slow Pdl, Reflective, abs plastic handles (assembly)
Aluminum Sign Hardware Kits 3008823 2211587 hardware kit for alum paddles with short alum
3007934 2188648 stop/slow Pdl, 18” diamond grade, abs plastic handles (assembly)
handle 3008822 2211563 hardware kit for alum paddles with short wood handle
STOP/SLOW 24” 3007772 2177601 stop/slow PDL, 24” non-reflective, abs plastic handles (assembly)
3007773 2177613 stop/slow Pdl, 24” reflect, abs plastic handles
B.
replacement parts 3007481 2080304 Plastic handle set for Stop & Slow (1 long, 1
(assembly)
3007770 2177558 stop/slow Pdl, 24” REFLECTIVE, abs plastic handles
short & hardware) 3007585 2087352 stop & slow paddle 6’ wood handle 3007480 2080303 short handle with male adapter 3007479 2080298 long handle with female adapter 3006231 0103589 short wood handle for alum stop & slow paddles 3006229 0103553 short alum handle for alum stop & slow paddles
(assembly)
3007933 2188636 stop/slow Pdl, 24” diamond grade, abs plastic handles (assembly)
Plastic Sign Hardware Kits: 3007436 2069907 hardware kit for plastic paddles with plastic handle 2004629 2211600 hardware kit for plastic paddles with 6’ wood handle only
barrier tape • • • •
inches wide x 1000 feet long x 2.5mm tall 3 Poly barricade tape provides warning of temporary safety hazards Economical, strong and disposable Special legends available with minimums and plate charge 3006620 3006627 3006625 3006618 3006619 3006622 3006621 3005693
0110843 barrier tape - caution - yellow 0111029 barrier tape - police line do not cross - yellow 0110972 barrier tape - fire line do not cross - yellow 0110805 barrier tape - danger do not enter - red 0110817 barrier tape - danger - red 0110867 barrier tape - caution do not enter - yellow 0110855 barrier tape - caution construction area - yellow 26434 barrier tape - caution Wet Floor - Yellow
SMC ™
Customer Service 1-800-428-8185
A DIVISION OF JACKSON SAFETY
throw away warning flags
heavy duty knitted warning flags
• • • • •
• Vinyl trim • Standard package 50 only 3006201 3001743 3006202 3007303 3006203 3006204
0102822 0102734 0102846 2057629 0102858 0102860
KNITTED KNITTED KNITTED KNITTED KNITTED KNITTED
VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING
FLAG FLAG FLAG FLAG FLAG FLAG
(18” (18” (18” (18” (24” (24”
FLAG FLAG FLAG FLAG FLAG FLAG
/ 24” DOWEL) / 30” DOWEL) / 36” DOWEL) ONLY) / 30” DOWEL) / 36” DOWEL)
tailgate warning flags
• 12” available with wire spreader • 18” available with dowel spreader OR
• H eat sealed hem • Standard pack 50 only • Non-Fouling feature and
wire spreader with pigtail
• 24” available with dowel spreader
imprinting available
VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING VINYL WARNING
FLAG FLAG FLAG FLAG FLAG FLAG FLAG FLAG FLAG FLAG
(18” (18” (18” (18” (18” (18” (18” (24” (24” (24”
FLAG FLAG FLAG FLAG FLAG FLAG FLAG FLAG FLAG FLAG
3006212 0103101 tailgate warning FLAG – 18” FLAG with dowel / 24” DOWEL) / 24” DOWEL WITH / 30” DOWEL) / 30” DOWEL WITH / 36” DOWEL) / 36” DOWEL WITH ONLY) / 30” DOWEL) / 36” DOWEL) / 36” DOWEL WITH
STAY)
spreader 3006214 0103125 tailgate warning FLAG – 24” FLAG with dowel spreader 3009293 5171152 tailgate warning FLAG – 12” FLAG with wire spreader
STAY) STAY)
STAY)
airport flags
• 36” x 36” nylon flag with pocket to mount on your existing staff
• Alternating checkerboard 12” x 12” squares in orange and white
• Sleeve opening is 2-3 ⁄ 4” W
plain weave mesh warning flags
3006235 0103644 airport truck signal flag, 36” x 36” orange white checkerboard
• 18” x 18” 3006205 3006206 3006207 3006210
0102896 0102913 0102925 0102951
MESH MESH MESH MESH
WARNING WARNING WARNING WARNING
FLAG FLAG FLAG FLAG
(18” (18” (18” (18”
FLAG FLAG FLAG FLAG
windsocks
/ 24” DOWEL) / 30” DOWEL) / 36” DOWEL) ONLY)
• Strong vinyl-coated nylon fabric in dayglow orange color
• Reinforced at both ends with extra • • • • •
flagman’s flag
• 24” x 24” • Reflective and Non-Reflective 3006215 0103151 3006216 0103163
stitching Windsock hardware sold separately 18” opening Available in 2’ x 8’ x 11” Begins to open at 3 MPH Fully extended at 21 MPH
3006697 0119239 airport windsock 2’ x 8’ x 11’ 3006663 0118209 windsock hardware
WARNING FLAG – 24” FLAG (NON-REFLECTIVE) WARNING FLAG – 24” FLAG (REFLECTIVE)
Custom Imprinting For flags Add your message to any standard vinyl warning flag with our custom flag screening. Initial set-up fee applies. Contact customer service for pricing and ordering information. Film charge and minimum order quantity applies for silk screen. Silk screen only, no stenciling.
YOUR DESIGN, YOUR LOGO, YOUR MESSAGE, ...OUR PLEASURE.
TR A FFI C S A FETY
0117152 0117217 0117229 0103230 0117176 0103254 0117164 0103266 0117205 0103292
conomy style E Nail or staple to overhanging load 12”, 16” or 18” No Hems or Grommets Packed 100 per bag
3006197 0102729 throw away FLAG – 12” FLAG 3006198 0102731 throw away FLAG – 16” FLAG 3006655 0117243 throw away FLAG – 18” FLAG
standard vinyl warning flag
3006648 3006653 3006654 3006217 3006651 3006218 3006650 3006219 3006652 3006220
57
TRAFFIC SAFETY
www.jacksonsafety.com
cyalume lightsticks
safety flares
• Ideal for traffic control, utility • • •
operations, and in-plant use 12-hour green or hi-intensity red and yellow with 30 minute duration Just bend, snap and shake for instant light Sold by standard pack quantity
3015078 2057655 12 HOUR GREEN (10/PACK) 3001771 2056601 30 MIN. HI-INT RED (10/PACK) 3015076 2056596 30 MIN. HI-INT YELLOW (10/PACK)
• Visible in fog, rain, or snow • Easy to ignite with self-contained • • • •
striker Approved by Underwriter’s Labs 20 or 30 minute duration Spike, spikeless, wire flares in stock Sold by case quantity only
3006660 0117944 3006661 0117956 3006659 0117932 3001750 0117279 3004843 0117267 3006658 0117920
20 20 20 30 30 30
MIN. MIN. MIN. MIN. MIN. MIN.
NON-SPIKE (CASE QTY 72) SPIKE (CASE QTY 72) WIRE (CASE QTY 72) NON-SPIKE (CASE QTY 36) SPIKE (CASE QTY 36) WIRE (CASE QTY 36)
reflective truck tape • Alternating 11” red and 7” white, • •
RUBBER WHEEL CHOCK
• Built to meet OSHA requirements • Designed for MAXIMUM traction • • •
on practically ANY surface, wet or dry Metal “O” hook imbedded in back Fluted design causes downward pressure to lock chock into place Available with or without 12 feet of jack chain
3006598 0109765 rubber wheel chock no chain (6”h x 10”L X 8”D)
3006599 0109777 rubber wheel chock w/12ft
chain attached (6”h x 10”L X 8”D)
highway banners
• Available in Wide Load, Oversize Load, or Wide Load/Oversize Load combination
pressure-sensitive tape 600 candelas bright Available in 2” x 50-yard rolls
• B right yellow with black letters • 18” x 8’ with 5’ rope ties • Letter size: 12”
1002225 2079017 reflective truck tape, 2” x 50 yards (red/white)
3006691 0119150 banner wide load, 18” x 8’ 3006601 0109820 banner oversize load, 18” x 8’ 3006692 0119162 banner wide load/oversize load combination, 18” x 8’
safety triangles
•M eets FMVSS-125 Standards • Constructed of molded polypropylene plastic with red acrylic plastic reflectors • Air-flow design helps reduce wind resistance 3006010 0100036 3006677 0118560 3006007 0100031
HIGHWAY TRIANGLE – SINGLE HIGHWAY TRIANGLE – SINGLE WITH WATER RESISTANT BAG HIGHWAY TRIANGLE KIT
fleet emergency kit
• Kit contains: Three compact safety triangles, One •
2-3⁄4 lb. 10 B.C. fire extinguisher, Three 30-minute Cyalume® Lightsticks, One hold-down strap and heavy-duty red metal carrying case Box size: 20”L x 7”W x 8”H
3006009 0100035
FLEET EMERGENCY SAFETY KIT
motorist safety kit
• Kit contains:Two 30-minute Cyalume® Lightsticks, One highway warning triangle, One ESK reflective vest,
• All enclosed in a protective water-resistant bag
3001747
0109753 motorist safety kit
SMC ™
Customer Service 1-800-428-8185
speed bump
A DIVISION OF JACKSON SAFETY
•W ill not warp, crack, chip or rot • Withstands 120,000 lbs • Yellow polyurethane glass-beaded paint for maximum reflectivity
• Channeled bottom (two 11⁄4” channels) allows for cabling or piping and facilitates drainage
59
parking curb
• W ill not warp, crack, chip or rot • 1⁄10 the weight of concrete • Yellow polyurethane glass-beaded paint for maximum reflectivity
• Resistant to UV, moisture, oil and extreme temperature variations
• Three spikes required on 48”, four spikes on 72” speed • Two spikes required on 36”, four spikes on 72” parking bumps. Spikes sold separately
curbs. Spikes sold separately
• Made of 100% recycled rubber
• Made of 100% recycled rubber
3007916 2185050 striped speed bump 2.5” x 12” x 48” (34 lbs.) 3007917 2185074 striped speed bump 2.5” x 12” x 72” (51 lbs.) 3007973 2192326 14” REBAR SPIKE
3007914 2185024 parking curb 4” x 6” x 36” (17 lbs.) 3007915 2185036 parking curb 4” x 6” x 72” (34 lbs.) 3007973 2192326 14” REBAR SPIKE
• • • • • • • • •
Four-panel barricade system for protecting “confined space” Ideal for confined space manholes, industrial plants, sidewalk barriers, airports, and hospitals Quick-release snap hinge/pin set allows for easy setup with no tools needed Folds accordion-style into low profile for compact storage Panels made of lightweight, but durable polypropylene Individual panels can be adjusted for uneven terrain Accommodates 8” x 30” striped panels and horizontal message boards (8” x 25”) (sold separately) Accommodates four (4) flashing barricade lights (sold separately) 16 lb custom flat weight offers additional stability
Unique Dual Use: 2 panels can be converted into a Type I A-Frame barricade with existing hinge/ pins and no tools.
3007797 3007798 3007796 3007800 3007801 3007802 3007803 3007804
2178402 2178403 2178401 2178405 2178406 2178407 2178408 2188410
3007805 2178412
3007799 2178404
WORKGARD 4 PANEL UNIT, ORANGE, NO SHEETING HINGE & PIN SET 16 LB FLAT WEIGHT STRIPED BOARD - 8" x 30" ORG/WHITE EG SHEETING CAUTION SIGN ON NON-REFLECTIVE SHEETING MEN WORKING SIGN ON NON-REFLECTIVE SHEETING KEEP OUT SIGN ON NON-REFLECTIVE SHEETING DANGER CONFINED SPACE ENTER BY PERMIT ONLY SIGN ON NON-REFLECTIVE SHEETING ARROW SYMBOL ONLY (RIGHT OR LEFT) ON NON-REFLECTIVE SHEETING PUSH PINS FOR SIGNS (500 PER BAG)
Note: signs sold separately include 3 push pins for installation
Expandable: Workgard System hinges together for larger work areas!
TR A FFI C S A FETY
workgard™ barricade system
FENCING
www.jacksonsafety.com
Safety fencing
Jackson Safety fences are produced with a material consisting of a U.V. stabilized high density polyethylene (HDPE) with a freezing point of approximately -112F. For added convenience, every item is rolled, labeled, bagged, palletized and stretch-wrapped. We offer fences for a variety of classifications: economy safety fence, mid-grade safety fences, diamond safety fences, specialty safety fences, snow fences and erosion control fences.
general purpose #9 fence
• Mono-oriented safety fencing with horizontal • • • •
oval openings Size/Color: 4x100 Orange Weight: 9 lbs Tensile Strength: MD: 180 lbs/ft TD: 60 lbs/ft Lower cost alternative to General Purpose #12
3014743 orange 9 lbs.
general purpose #12 fence • • • • • •
Mono-oriented safety fencing with horizontal openings Size/Color: 4x100 Orange; 4x100 Green Weight: 12 lbs 48 rolls per pallet Tensile Strength: MD: 240 lbs/ft TD: 90 lbs/ft Heavier and more visible than General Purpose #9
3007305 2057679 orange 12 lbs. 3007813 2180153 green 12 lbs.
light duty diamond fence
• Diamond mesh safety fence with smooth top and • • • • •
bottom Size/Color: 4x50 Orange; 4x100 Green Weight: 4x50/11 lbs; 4x100/23 lbs 4x50/42 rolls per pallet; 4x100/20 rolls per pallet Tensile Strength: MD: 100 lbs/ft TD: 85 lbs/ft Lower cost alternative to Mid Grade Diamond Fence
3014744 orange 11 lbs 3014745 orange 23 lbs
mid grade diamond fence • • • • • •
Diamond mesh safety fence with smooth top and bottom Size/Color: 4x50 Orange; 5x50 Orange Weight: 4x50/14 lbs; 5x50/18 lbs 30 rolls per pallet Tensile Strength: MD: 160 lbs/ft TD: 100 lbs/ft Heavier and more visible than Light Duty Diamond Safety Fence
3007606 2088353 orange 14 lbs 3006612 0110283 orange 23 lbs
heavy duty diamond fence • • • • • •
Diamond mesh safety fence with smooth top and bottom Size/Color: 4x50 Black; 4x50 Green; 4x50 Orange; 4x100 Orange Weight: 50’/16 lbs; 100’/32 lbs 48 rolls per pallet Tensile Strength: MD: 180 lbs/ft TD: 175 lbs/ft Strongest and heaviest diamond mesh fence
3006609 0110245 black 16 lbs 3006610 0110257 green 16 lbs 3011239 orange 16 lbs 3006607 0110221 orange 32 lbs
SMC ™
Customer Service 1-800-428-8185
61
A DIVISION OF JACKSON SAFETY
economy fence • • • • •
Lightweight safety fence with oval openings Size/Color: 4x100 Orange Weight: 8.5 lbs 48 rolls per pallet Used as a visual barrier for crowd control and around the job sites, etc.
3014742 orange 8.5 lbs
erosion control silt fence • • • • • •
100 ft woven silt fence with stakes Size/Color: 3x100 Black Weight: 22.5 lbs 25 rolls per pallet Tensile Strength: MD: 20 lbs/ft TD: 20 lbs/ft Woven silt fence with 42” hardwood stakes that are spaced 10 ft. apart
3007594 2087651 black 22.5 lbs
• Mono-oriented safety fence with horizontal • • • • •
openings Size/Color: 4x100 Orange Weight: 24 lbs 24 rolls per pallet Tensile Strength: MD: 565 lbs/ft TD: 190 lbs/ft Works as a warm-weather safety fence or in situations where both snow control and safety are needed, as well as an efficient windbreak fence
3006614 0110348 orange 24 lbs
New #
old #
3014743 3007305
2057679
Description
size/color
weight rolls per tensile STRENGTH pallet
general purpose #9 fence / horiZontal
4x100 orange
9 lbs
48
MD: 180 lbs/ft TD: 60 lbs/ft
general purpose #12 fence / horiZontal
4x100 orange
12 lbs
48
MD: 240 lbs/ft TD: 90 lbs/ft
3007813
2180153
general purpose #12 fence / horiZontal
4x100 green
12 lbs
48
MD: 240 lbs/ft TD: 90 lbs/ft
3006609
0110245
heavy duty diamond fence / diamond
4x50 black
16 lbs
30
MD: 180 lbs/ft TD: 175 lbs/ft
3006610
0110257
heavy duty diamond fence / diamond
4x50 green
16 lbs
30
MD: 180 lbs/ft TD: 175 lbs/ft
heavy duty diamond fence / diamond
4x50 orange
16 lbs
30
MD: 180 lbs/ft TD: 175 lbs/ft
3011239 3006607
0110221
heavy duty diamond fence / diamond
4x100 orange
32 lbs
9
MD: 180 lbs/ft TD: 175 lbs/ft
3007606
2088353
mid grade diamond fence / diamond
4x50 orange
14 lbs
30
MD: 160 lbs/ft TD: 100 lbs/ft
3006612
0110283
mid grade diamond fence / diamond
5x50 orange
23 lbs
30
MD: 160 lbs/ft TD: 100 lbs/ft
3014744
light duty diamond fence / diamond
4x 50orange
11 lbs
42
MD: 100 lbs/ft TD: 85 lbs/ft
3014745
light duty diamond fence / diamond
4x100 orange
23 lbs
20
MD: 100 lbs/ft TD: 85 lbs/ft
economy fence / oval
4x100 orange
8.5 lbs
48
MD: 35 lbs/ft TD: 25 lbs/ft
3006614
3014742 0110328
snow and wind fence / horizontal
4x100 orange
24 lbs
24
MD: 565 lbs/ft TD: 190 lbs/ft
3007594
2087651
erosion control silt fence
3x100 black
22.5 lbs
25
MD: 20 lbs/ft TD: 20 lbs/ft
FEN C IN G
snow and wind fence
FLOOR WARNING SIGNS
www.jacksonsafety.com
Standard Lamba® Cones
• Protect yourself from liability issues with the first name in slip, trip and fall protection. Lamba® products offers
the original four-sided cone with a variety of messages, languages and accessories, including chain links and lock-in signs. They can be stacked in just one square foot of space when not in use.
• 25" and 36" Floor Cones • Available in international languages and styles
•A vailable plain or imprinted • Available in yellow and lime green • 25” cone dimensions: 10" base, 4-3/4" middle, 3-1/4" top
• 36” cone dimensions: 12" base, 6" middle, 3-1/2" top
• Sold in standard package 5 • Contact Customer Service for more information at 800-428-8185
25” Floor Cones 3000479 3005557 3009661 3010288 3000478 3005553
23820 plain 23819 caution 23800 no entry - restroom closed 23801 no parking 23809 safety first 23812 wet floor
spanish 3005584 23935 cuidado piso mojado Spanish/english 3005555 23816 cuidado piso mojado/wet floor 3005552 23811 cuidado/seguridad aute todo/ safety first
3005556 23817 cuidado/wet floor french 3010289 23909 securite d’abord french/english 3010290 23810 securite d’abord/safety first 3005554 23815 plancher mouille/wet floor
36” Floor Cones 3000485 3000484 3005563 3005564 3009773 3005591 3005565 3005566 3005571 3000481 3000482
23888 plain 23887 caution 23834 danger people working above 23836 floor may be slippery 23911 hazardous material 23983 icy areas 23838 no entry - restroom closed 23839 no parking 23861 restricted area 23863 safety first 23870 wet floor
Spanish/english 3000483 23879 cuidado piso mojado/wet floor 3005575 23868 cuidado/seguridad aute todo/ safety first
french/english 3005573 23865 securite d’abord/safety first 3005576 23873 plancher mouille/wet floor
36” Floor Cones - Lime 3005661 24238 caution wet floor 3005660 24237 safety first
SMC ™
Customer Service 1-800-428-8185
packaged systems
63
A DIVISION OF JACKSON SAFETY
Three Cone System • A vailable in 25" or 36" • Contains:
•
3 yellow cones 1 red flashing light 1 - 20' yellow plastic 2" chain 2 lock-in signs (Red) 4 message labels* International system only available in 36”
3005558 23824 25” wet floor, label a 3000480 23823 25” safety first, label b 3005579 23891 36” wet floor, label a 3005578 23890 35” safety first, label b inTERnational 3005590 23980 35” wet floor (english/spanish), label c
•A vailable in 25" or 36" • Contains: 5 3 2 2 4
yellow cones red flashing lights - 20' plastic 2" chains lock-in signs (Red) message labels*
3005559 23826 25” wet floor, label a 3009662 23825 25” safety first, label b 3005581 23893 36” wet floor, label a 3005580 23892 36” safety first, label b inTERnational 3005586 23946 36” wet floor (english/spanish), label f
cone labels* • • • • • •
Label A: 2 wet floor walk to the right, 2 wet floor walk to the left Label B: 1 wet floor walk to the right, 1 wet floor walk to the left, 1 slippery, 1 watch your step Label C: 2 slippery (Eng/Sp.), 2 watch your step (Eng./Sp.) Label D: 2 slippery (Eng./Fr.), 2 watch your step (Eng./Fr.) Label E: 2 slippery (Eng./Sp.), 2 watch your step (Eng./Sp.) Label F: 4 wet floor (Eng./Sp.)
Lamba® belt
• Highly visible with alternating black and yellow
• Alleviate traffic in work areas • Easily attaches to any Lamba cone • Lamba Belt System includes: (2) (1) (1) (1)
36” Cones (wet floor or safety first) 21 lb. Ring Weight 9 lb. Ring Weight 2” Lamba Belt extends up to 7’6”
3000551 26827 yellow lamba belt 3000553 26830 yellow wet floor system 3000552 26829 yellow safety first system
F L OOR W A RNIN G S I G N S
fIVE Cone System
FLOOR WARNING SIGNS lock-in signs
3000537 26400 black frame 3000538 26401 red frame
www.jacksonsafety.com
message labels
• Yellow 8" x 8" adhesive backed vinyl English Description 3005694 26449 Section Closed 3005699 26469 Slippery 3005702 26473 Out of Service 3005704 26475 Electrical Hazard 3005705 26477 Hard Hat Area 3005706 26478 No Entry - Construction 3005708 26480 Watch Your Step 3000543 26481 Restroom Closed - No Entry 3005709 26483 Plain 3005710 26485 People Working 3005711 26487 No Entry - Restricted Area 3000544 26490 Wet Floor Please Walk to the Right 3000545 26491 Wet Floor Please Walk to the Left
3005718 3005719 3005721 3005723 3005713 3005730
26501 Caution Floor May be Slippery 26502 Caution - Wet Floor 26505 People Working Above 26513 Out of Order 26489 Black Arrow 26559 Caution - Falling Ice
International Description 3000546 26498 Wet Floor (English/Spanish) 3005724 26516 Restroom Closed (English/Japanese) 3005726 26536 Out of Service (Spanish) 3005727 26539 Watch Your Step (English/Spanish) 3000547 26540 Slippery (English/Spanish)
lock-in flashing lights
• Light has convenient on/off switch and lasts up to 300 hours!
• Requires 2 “AA” Batteries (not included) 3000549 26649 lock-in flashing lights
ring weights • Black
2" plastic chain • Yellow 2" Link
3005687 26413 For 25" Cone, 7 lbs. 3000541 26414 For 36" Cone, 9 lbs. 3005833 26828 for 36” cone, 21 lbs.
custom LAMBA® cones YOUR DESIGN, YOUR LOGO, YOUR MESSAGE, ...OUR PLEASURE.
3000539 26407 20’ (bulk) 3000540 26408 100’ (Bulk)
• Company recognition as well as safety messages can be conveyed with customized cones, floor warning signs and message labels.
• Lamba® Cones: • Minimum order = 75 cones per size (may not combine 25"
• •
• Definition of Camera Ready/Photo •
Reproducible Artwork: black on glossy white background with sharp images. Please Note: photocopies, business cards, drawings, letterhead, decals, etc are not camera-ready and require additional charges.
and 36" cones) Images can be silk-screened as follows: Same message on all four sides; 2 different messages on two sides (Contact Customer Service for details) One color to silk-screen area Allsafe Services & Materials requires customer to supply camera-ready artwork. Minimum 3 week lead time after approval of artwork One-time silk-screen charge per screen applies No silk-screening charge on orders exceeding 200 cones Only available in black ink 2x4™ Floor Warning Signs: Minimum order = 30 floor warning signs Image is silk-screened on both sides of 2x4 One-time silk-screen charge per screen applies Logo message will be screened in black Logo imprint area measures 2" H x 4" W Allsafe Services & Materials requires customer to supply camera-ready artwork. Minimum 3 week lead time after approval of artwork Minimum order = 12 labels per message One-time silk-screen charge per screen applies
•
• • • • • • • • • • • •
SMC ™
Customer Service 1-800-428-8185
65
A DIVISION OF JACKSON SAFETY
Safety floor signs
• The Lamba® 2x4 safety floor sign has helped a large number
of corporations control their environments and dramatically reduce their liability programs. Instrumental in these efforts has been Lamba’s 2x4™ safety floor sign. Featuring Lockin’Arm™ technology for easy set-up and extra stability, four-sided caution messages display clear warnings from every angle. The 25" high, bright yellow plastic signs fold up quickly and store in spaces as narrow as 3" across.
YOUR DESIGN, YOUR LOGO, YOUR MESSAGE, ...OUR PLEASURE.
Custom Screening Available
2x4
• For imprint
location and details, see previous page
• 25" high, bright yellow plastic signs • • •
stand up and stay up when needed, fold up when not Message displayed clearly on all four sides provides clear warning from every angle Innovative Lockin’Arm™ lets you place sign quickly and easily, locks solidly into place to prevent collapsing Folds up quickly to space saving 1-1/2'' thickness
3000488 3005605 3005606 3000489 3005607 3005609 3005610 3005611
• To expand the
effectiveness of the 2x4™, simply attach our 2'' link chain to the custom hooks to create a safety system • Plastic Chain
24102 Caution, Wet Floor 24103 Safety Man, Large, Wet Floor 24105 Wet Floor, Walk Right/Left 24106 Wet Floor, Cuidada Piso Mojado 24107 Wet Floor, Plancher mouillé 24109 No Entry, Restroom Closed 24110 Caution, Watch Your Step 24111 Out of Service
3000539 26407 20’ (bulk) 3000540 26408 100’ (Bulk)
economy floor stands
• Lightweight, corrosion resistant and moisture proof
Lime Green Floor Signs
• L ime green color demands attention • Standard accessories available
• F olds flat for easy storage • Standard legends only • 9-1/4" W x 24" H 3017717 3017718 3017723 3017722
32040 Yellow PLAIN 32041 Caution Watch Your Step 32046 Caution, Wet Floor 32049 Out of Service
Spanish/English 3017719 32042 Caution Wet Floor/Cuidado
3000550 26814 Caution Wet Floor
Spanish/English 3005825 26815 Caution Wet Floor/Cuidado Piso
ENGLISH/FRENCH 3017720 32047 Closed, Cerrado, Fermé 3017721 32048 No Entry, Restroom Closed
Mojado
Piso Mojado
F L OOR W A RNIN G S I G N S
2x4 floor sign
FIRST AID
www.jacksonsafety.com
25 PERSON KITS 25 person kits
• Available in metal or polyethylene
• Meets DESCRIPTION
25 PERSON KITS
CONTRACTOR box 25 KIT
DESCRIPTION
ANSI Z308.1-2003 UNITS PIECES UNITS PIECES PER UNIT medium PER UNIT • Ideal for most work environments, businesses and workplaces 25-BA Bandage Assortment 1 • Contractor 25 - Meets basic requirements, ideal for Certi-Strip Plastic, 1”x 3” 25 1 50 most job sites Certi-Gauze Pad, 3”x 3”
1
Eye Pad
1
Certi-Strip, Fingertip
1
Certi-Strip, Knuckle
1
Adhesive Certi-Tape, 1/2”x 5 yd.
1
Ammonia Inhalant 1”x 1”
1
DESCRIPTION
1 6
Insect Sting Wipe-up
2
Aspirin tablets 2/pkg.
10
1
50
4
Certi-Gauze Pad, 4”x 4”
1
Eye Pad
1
2 1
Certi-Strip, Knuckle
PER UNIT
BZK Towelette
Certi-Gauze P
6
Insect Sting Wipe-up
2
2
Eye Pad
Eye Pad
1 1
Aspirin tablets 2/pkg.
2 1 1
Certi-Gauze Roll - 2”x 6 yd. Certi-Strip Adhesive Bandage, Plastic 1” x 3” Gloves, Nitrile, Pair M/L
1
1
1 1 2
2 1
1
6
1
Insect Sting Wipe-up
2
2
Triangular Bandage 40”
1
1
First Aid Facts Sheet
1
1
First Aid Facts Sheet
1 2 1Aspirin tablets 2/pkg. DESCRIPTION Cold Pack, Certi-Cool Junior 1 1
DESCRIPTION
PIECES PER UNIT
10 PERSON UNITS
1
1
• Sheet Meets 1First Aid Facts
1
1
1
1
16
1
2
2
2
1
210
11
Certi-Strip, Plastic, XLG
6
Certi-Strip, Plastic, 1”x 3”
16
1
2
Certi-Strip, Plastic, XLG
6
Adhesive Certi-Tape, 1/2”x 5 yd.
1
1
1
Antiseptic BZK Towelettes
10
1
1
Bandage Compress, 4”
4
1
Forceps, Plastic
1 Certi-Gauze Roll - 2”x
4 work environment
1 Triangular Bandage 4 1
• AvailableCold in Pack, metal box Certi-Cool Junior CPRotector w/Gloves Eye Dressing (20PIECES ml. Eye Wash, 2 Eye Pads, Tape)
PER UNIT
Certi-Gauze Pads, 3”x 3” Gloves, Nitrile, Pair
Eye Wash, Certi-Ose
1 Gloves, Nitrile, Pair M
1
1 Towelettes Antiseptic BZK
DESCRIPTION
16 PERSON Cold Pack, Certi-Cool UNITS
1
Adhesive Certi-Tape, 1/2”x 5 yd.
1
Certi-Burn Cre
Insect Sting W
10 PERSON UNITS
1
BZK Towelette
Aspirin tablets 2/pkg.
PIECES PER1 UNIT
1
ANSI Z308.1-2003 1 1/8 oz Certi-Burn Gel,
1 25-FA First Aid Asso 1
10 & 16 person welders kits 1 1
Absorbent Compress, 32 sq. in.
Certi-Strip Adhesive B
1 Plastic 1” x 3”
1
1
UNITS Triangular Bandage 40” 1 welding Bandage Compress, 4” • Designed for the
Ammonia Inhalant 1”x
2
Certi-Strip, Plastic, 1”x 3”
Gloves, Nitrile, Pair M/L 16 Trauma Pad 5”x 9” PERSON
Adhesive Certi-Tape, 1
10 1 6
1 1Eye Wash, Certi-Ose 20 ml. Absorbent Compress, 32 sq. in. Forceps, Plastic 1 Certi-Gauze Roll - 2”x 6 yd.
2
1
Certi-Strip, Fin
Certi-Strip, Kn
1
1
1
Certi-Burn Cream, 1 gm
2
Certi-Gauze P
1 6
1
1
2
Certi-Strip Plas
Certi-Burn Cream, 1 gm
10
1
50
25-BA Bandage Asso
10
BZK ToweletteTriangular Bandage 40”
Trauma Pad 5”x 9”
1
10
Certi-Gauze Pad, 4”x 4” Certi-Strip, Fingertip
1
DESCRIPTION
PIECES 1 PER UNIT
1
25-FA First Aid Assortment Certi-Gauze Pad, 3”x 3” 4
1
Gloves, Nitrile, Pair M/L
1
UNITS
1
1
Trauma Pad 5”x 9” 25-FA First Aid Assortment 1
1
CONTRACTOR 1 25 KIT
UNITS1/2”x 5PIECES Adhesive Certi-Tape, yd. 1
Certi-Strip, Knuckle Cold Pack, Certi-Cool Junior 1 6 Adhesive Certi-Tape, 1/2”x 5 yd.Certi-Ose 1 20 ml. Eye Wash, 2 Plastic 1 Ammonia Inhalant 1”xForceps, 1”
Cold Pack, Certi-Cool Junior 1 3011190 25 person metal 3011188 25 person poly Eye Wash, Certi-Ose 20 ml. 1 3011467 contractor 25 poly Forceps, Plastic 1 Certi-Gauze Roll - 2”x 6 yd.
25
Certi-Gauze Pad, 3”x 3”
1
Certi-Strip Adhesive Bandage, Plastic Certi-Strip Plastic, 1”x1”3”x 3” 25
1
Certi-Burn Cream, 1 gm
Certi-Strip Plastic, 1”x 3”
25-BA Bandage Assortment
1
10
PIECES PER UNIT
Ammonia Inhalant 1”x 1”
1
BZK Towelette
UNITS
25 Fingertip PERSON KITS Certi-Strip,
Certi-Strip Adhesive Bandage, Plastic 1” x 3” 25-FA First Aid Assortment
PIECES PER UNIT
25-BA Bandage Assortment
4
Certi-Gauze Pad, 4”x 4”
UNITS
CONTRACTOR 25 KIT
11
1
1
2
10 4
PERSON 4 UNITS
Absorbent Compress, 32 sq. in.
1
1 1
PVP Iodine Wipe-Ups
16
1 10
1 Trauma Pad 5”x 9”
First Aid Facts Sheet
1 1
161
PERSON 1 UNITS 2
1
1
DESCRIPTION
1 2 1
Absorbent Com
1
Certi-Strip, Plas
Certi-Burn Gel, 1/8 oz
6
1
1
Certi-Strip, Plastic, 1”x 3”
16
Cold Pack, Certi-Cool Junior
1
1
1
Certi-Strip, Plastic, XLG
6
CPRotector w/Gloves
2
1
Adhesive Certi-Tape, 1/2”x 5 yd.
1
1
1
Eye Dressing (20 ml. Eye Wash, 2 Eye Pads, Tape)
4
1
Antiseptic BZK Towelettes
10
1
1
Bandage Compress, 4”
4
Certi-Gauze Pads, 3”x 3”
4
Certi-Burn Gel, 1/8 oz
6
1
1
Gloves, Nitrile, Pair
1
Cold Pack, Certi-Cool Junior
1
1
1
PVP Iodine Wipe-Ups
10
1
CPRotector w/Gloves
2
Triangular Bandage with Pins
1
1
Eye Dressing (20 ml. Eye Wash, 2 Eye Pads, Tape)
4
1
1
Certi-Gauze Pads, 3”x 3”
4
1
1
Eye Dressing (2 Wash, 2 Eye Pa
1
Gloves, Nitrile,
1
PVP Iodine Wip
1 1
1
Triangular Bandage with Pins
1
2
1
1
1
WWW. 2JPISAFETY.COM • CUSTOMER SERVICE: 800/231-1332 OR 800/428-8185 2
MER SERVICE: 800/231-1332 OR 800/428-8185
1
Gloves, Nitrile, Pair PVP Iodine Wipe-Ups Triangular Bandage with Pins
1
3011194 10 person metal 1 2 2 3011195 16 person metal 10 1
1
Certi-Strip, Plas
Adhesive CertiAntiseptic BZK
Bandage Comp Certi-Burn Gel,
Cold Pack, Cer
CPRotector w/G
Certi-Gauze Pa
Triangular Band
SMC ™
Customer Service 1-800-428-8185
A DIVISION OF JACKSON SAFETY
10 person kits
DESCRIPTION
• Available in metal or polyethylene box • Meets ANSI Z308.1-2003 • Ideal for small workplaces
UNITS
10-BA Bandage Assortment
PIECES PER UNIT
1
Certi-Strip Plastic, 1”x 3”
16
Certi-Gauze Pad, 3”x 3” DESCRIPTION
4
UNITS Certi-Strip, Fingertip
Certi-Strip, Knuckle
10-BA Bandage Assortment
PIECES PER UNIT
1
Adhesive Certi-Tape, 1/2”x 5 yd.
DESCRIPTION
67
UNITS
10-BA Bandage Assortment
PIECES PER UNIT
1
10-AA First Aid Assortment Certi-Gauze Pad, 3”x 3”
14
BZK Towelette Certi-Strip, Fingertip
Certi-Burn Cream, 1 gm Certi-Strip, Knuckle
16
Certi-Gauze Pad, 3”x 3”
4
Insect Adhesive Certi-Tape, 1/2”xSting 5 yd. Wipe-up1
Certi-Strip, Fingertip
1
Pack, Certi-Cool Junior1 10-AA FirstCold Aid Assortment
Certi-Strip, Knuckle
1
Adhesive Certi-Tape, 1/2”x 5 yd.
1
10-AA First Aid Assortment
1
Towelette 3011187 BZK10 person metal 3011186 Certi-Burn 10 person Cream, 1poly gm
10
Insect Sting Wipe-up
1
16 21
Forceps, Plastic 4.5”
1
Forceps, Plastic 4.5”
1
Gloves, Nitrile, Pair M/L
2
Certi-Gauze Roll - 1”x 6 yd.
1
Scissors, Bandage w/Red Handle 4”
1
Gloves, Nitrile, Pair M/L
2
Trauma Pad 5”x 9”
1
Scissors, Bandage w/Red Handle 4”
1 1
Triangular Bandage, 40” DESCRIPTION
1
Trauma Pad 5”x 9” Triangular Bandage, 40”
1
First Aid Facts Sheet
1
First Aid Facts Sheet
1
Triangular Bandage, 40” First Aid Facts Sheet
50-BA Bandage Assortment
1
Certi-Strip Plastic, XLG
2
Certi-Gauze Pad, 4”x 4”
2
Certi-Gauze Pad, 3”x 3”
4
Eye Pad
2
Adhesive Certi-Tape, 1/2”x 5 yd.
1
50 FA-1 First Aid Assortment
1
1
Adhe
1
10-AA
1
1
50-BA Bandage Assortment
1
Certi-
Certi-Strip Plastic, XLG
UNITS
UNITS
50 person kits
Certi-Strip, Adhesive Certi-Gauze Bandage, Plastic 1”x4”x 3” 4” Pad,
1
PIECES PER UNIT
2
100/box
2
• Bandage Available in metal or polyethylene box 50-BA Assortment Certi-Gauze Pad, 3”x 3” 1 4 • Certi-Strip Meets ANSI Z308.1-2003 Plastic, XLG 2 Eye Pad 2 • Ideal for large businesses, manufacturing plants, office Certi-Gauze 4”x warehouses 4” 1/2”x 5 yd. complexes and AdhesivePad, Certi-Tape,
12
Certi-Gauze 50 FA-1 Pad, First3”x Aid3”Assortment
14
Eye Pad
Alcohol Wipe-Ups
2
Adhesive Certi-Tape, 1/2”x 5 yd.
1
50 FA-1 First Aid Assortment
1
Certi-Burn Cream, 1 gm First Aid Cream, 1 gm
Alcohol Wipe-Ups
10
Certi-Burn Cream, 1 gm
6
Certi-Burn Cream, 1 gm
First Aid Cream, 1 gm
5
First Aid Cream, 1 gm
Insect Sting Wipe-up
3
Insect Sting Wipe-up
1
1
Certi-Strip, Adhesive Bandage, Plastic 1”x 3”
Alcohol Wipe-Ups
50 FA-2 First Aid Assortment
10-BA
PIECES PER UNIT Cold 100/box Force
DESCRIPTION
100/box
DESC
6 5
Antiseptic BZK Towelette Aspirin tablets 2/pkg.
5 3
3 1
10
3
Aspirin tablets 2/pkg.
5 3
5
3
Antibiotic Cream, Certi-Sporyn, 1 gm
PVP Iodine Wipe-Ups Aspirin tablets 2/pkg. Ammonia Inhalant 1”x 1”1 gm Antibiotic Cream, Certi-Sporyn,
23
Pack, Certi-Cool Junior PVPCold Iodine Wipe-Ups
13
3
Cold Pack, Certi-Cool Junior
1
Cotton Swabs 3”
1
Elastic Bandage, Ace Style 2”
Ammonia Inhalant 1” 3” Cotton 1”x Swabs
2
1
Cold Pack, Elastic Certi-Cool Junior Ace Style 2” Bandage,
1
1
1
Cotton Swabs Eye3”Wash, Certi-Ose 20 ml.
1
1
Eye Wash, Certi-Ose 20 ml.
1
1
Forceps, Plastic
1
Elastic Bandage, AcePlastic Style 2” Forceps,
1
Certi-Gauze Roll - 1”x 6 yd.
Eye Wash, Certi-Ose 20 ml.
1
1
Forceps, Plastic
1
Gloves, Nitrile, Pair M/L
2
Scissors, Bandage w/Red Handle 4”
1
Certi-Gauze Roll - 1”x 6 yd.
Trauma Pad 5”x 9”
1
Triangular Bandage w/2 Safety Pins 40”
1
M • CUSTOMER SERVICE: 800/231-1332 OR 800/428-8185
Certi-Gauze Roll - 1”x 6 yd. Gloves, Nitrile, Pair M/L
Traum
Trian
First A
DESC
Certi-
50-B
5
Antibiotic Cream, Certi-Sporyn, 1 gm Antiseptic BZK Towelette
2
Sciss
10
10
PVP Iodine Wipe-Ups
Glove
1
50 FA-2 First Aid Assortment
50 FA-2 First Aid Assortment
6 10
Insect Sting Wipe-up
10
Antiseptic BZK Towelette
Ammonia Inhalant 1”x 1”
FIR S T A ID
1
1
1
Insect Sting Wipe-up Gloves, Nitrile, Pair M/L
Certi-Gauze Roll - 1”x 6 yd.
Certi-Strip, Adhesive Bandage, Plastic 1”x 3”
6
Certi-Burn Cream,Roll 1 gm Certi-Gauze - 1”x 6 yd.
Trauma Pad 5”x 9”
PIECES PER UNIT
1
110
1
UNITS
10
BZKForceps, TowelettePlastic 4.5”
Cold Pack, Certi-Cool Junior
DESCRIPTION
1
1
Cold Pack, Scissors, Certi-CoolBandage Junior w/Red Handle 1 4”
6
1
116
Certi-Strip Plastic, 1”x 3”
Certi-Strip Plastic, 1”x 3”
1
1
Trauma Pad 5”x 9”
1
Triangular Bandage w/2 Safety Pins 40”
1
Triangular Bandage w/2 Safety Pins 40”
50 FA
50 FA
1
2 3011192 150 person metal Scissors, Bandage w/Red Handle 4” 3011191 50 person 1poly Gloves, Nitrile, Pair M/L 2 Trauma Pad 5”x 9” 1 Scissors, Bandage w/Red Handle 4”
Adhe
1
WWW. JPISAFETY.COM • CUSTOMER SERVICE: 800/231-1332 OR 800/428-8185
Amm Cold
Cotto
Elast
Eye W
WELDING
www.jacksonsafety.com
Auto-Darkening Features and selection chart:
• Delay Adjustment: controls the amount of time the lens will stay dark, before transitioning back to the light state, after you have stopped • • • • • • • • • •
the arc. This is beneficial when making several consecutive welds in the same area and the light state is not necessary to get set for the next weld. The higher the number, the longer the unit will stay dark after the arc before transitioning to the light state. Sensitivity Adjustment: allows user to fine tune the unit depending on ambient light (such as the sun, overhead lighting or other welders in close proximity) or arc intensity. This feature allows low amp, DC TIG welding that other units cannot do. The higher the number, the more sensitive the unit will be to ambient light or arc intensity, thereby transitioning to dark with a less intense light. Solar Battery Life Extender: solar panel that extends the welding hours provided by a set of batteries, thus decreasing battery replacement costs and downtime Intellisense™: allows the unit to detect weld less than 5 amps. This feature is useful for those who are performing low-amperage welds, primarily low-amp TIG welding. 3N1: provides three modes of operation for the lens: grind (shade 3), weld (shades 9-12) and oxyfuel gas cutting (shade 5). This allows the welder the ability to wear one hood for every welding process, thus eliminating downtime. HTLS Lightstate: maintains a clear state of 3.75, the clearest PI filter available. The HTLS Lightstate provides good color and visibility for hood-down set-up in environments with low ambient light. Independent Redundant Sensors: in units of two or more sensors, if one sensor is blocked or damaged, the unit’s performance will not be compromised. Therefore, welders can work in tight areas, where a sensor may be blocked, without any interruptions. Auto-Off: battery maximizing feature that manually shuts-down the unit when not in use or 20 minutes after the last arc is struck. ClimaSensor™ Technology: tests the ambient air temperature three times per minute and automatically adjusts the lens accordingly to ensure a true shade when welding. ClimaSensor technology is useful to those who are welding in extremely hot or cold environments. EMI Coating: a special coating applied to the casing of the unit to protect the electronics against extreme electromagnetic interference. This coating is essential for welders who generate higher than normal electromagnetic interference, such as TIG welding, particularly AC TIG, and other alternating current welding applications, or are in an environment with a concentration of this interference. Low Voltage Indicator: when lit, alerts the welder to change the batteries in their ADF. Replacement batteries must be alkaline batteries for optimal performance. Huntsman recommends the same battery brand as what originally came with the product to ensure a proper fit and connection with the unit.
AUTO-DARKENING LENS FEATURES
NexGen
Turbo
AutoView 1105VXL
AutoView 1100IVXL
AutoView 1105VLS
AutoView 1105VS
X
X
1100BVL Variable Shade
Solar Powered 1-3/4” x 3-3/4” Window
X
X
X
1.1 x 3.75 Window
X X
1.65 x 3.78 Window
X
X
X
X
X
Auto-Off Feature
X
On/Off Switch w/auto-off
X
Intellisense
X
X
X
X
Sensitivity Adjust
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Single Sensor
X X
Two Independent Redundant Sensors Four Independent Redundant Sensors
Solera
X
1-1/2” x 3-3/8” Window
2-3/8” x 3-3/4” Window
Solex Variable
X X
Uses 2 “AAA” Batteries Uses 2 Lithium “Coin” Batteries
X
Solar Battery Life Extender
X
Low Voltage Indicator Lamp
X
X
X
X
X
X
X
X
X X
X
X
X
X
X
X
X
X
X
X
Fixed Shades 10, 11
X
Variable Shade 9-12
X
X
X
X
X
X
Dark to Clear Delay Adjust
X
X
X
X
X
X
HTLS Light State
X
X
X
X
3N1 Grind, Cut, Weld
X
Climasensor Technology
X
EMI Coating
X
Fits 951 P Series Hood
X
X
X
X
Fits 911 P Hood Fits 981 P Hood
X
X
X
X
X X
X
HUNTSMAN ®
Customer Service 1-800-428-8185
69
A DIVISION OF JACKSON SAFETY
NEXGEN EQC
• 3N1 Technology Allows 3 modes of operation: weld, grind, or torch
• Intellisense technology • 4 independent, redundant sensors • SmartView LCD screen and soft touch control panel • • • • • • •
eliminates contaminants and protects controls from harsh welding environment ClimaSensor Technology EMI Coating Sensitivity and delay adjustments Replaceable lithium batteries Low voltage indicator lamp Meets CSA standards Variable shade 9-13
3000502 25047 951P with NexGen 3000505 25050 951P NexGen Bulk
AUTOVIEW 1100IVXL
AUTOVIEW 1105VLS
3000523 25140 951P with AutoView 1105VXL 3004015 33097 AutoView 1105VXL Cartridge
3004005 30089 AutoView 1100IVXL Cartridge
3004016 33098 AutoView 1105VLS Cartridge
AUTOVIEW 1105VS
AUTOVIEW BASIC 1100BVL
TURBO
• Variable shade 9-12 • 1 independent sensor
• • • • • •
3000524 25141 911P w/ AutoView BASIC 3004004 30085 AutoView BASIC 1100BVL
3000534 25209 951P with Turbo 3004013 30107 Turbo Cartridge
• • • • • •
• • • • •
Variable shade 9-12 Sensitivity and delay adjustments Intellisense 4 independent, sensors Low voltage indicator lamp ON/OFF switch with auto-off
Variable shade 9-12 Sensitivity and delay adjustments Intellisense 2 independent sensors Low voltage indicator lamp
3000522 25139 951P w/ AutoView 1105VS 3004017 33099 AutoView 1105VS Cartridge
• • • • •
Variable shade 9-12 Sensitivity and delay adjustments Intellisense 2 independent sensors Low voltage indicator lamp
• • • • • •
Variable shade 9-12 Sensitivity and delay adjustments Intellisense 2 independent sensors Low voltage indicator lamp ON/OFF switch with auto-off
Variable shade 9-12 2 independent sensors Sensitivity and delay adjustment Intellisense Low voltage indicator lamp Meets CSA Standards
W E L DIN G
AUTOVIEW 1105VXL
WELDING
www.jacksonsafety.com
solar powered helmets & lenses
SOLEX VARIABLE • • • •
SOLERA
• Available in shade 10/11 or shade 12 • Solar Powered • 2 sensors
Variable shade 9-12 Solar Powered Sensitivity adjustment 2 sensors
3000526 25143 951P with Solex Variable 3004010 30104 Solex Variable Cartridge Only
3000504 25049 981P with Solera 3004006 30090 Solera Cartridge 3011118 981P with Solera Sh 12 3011117 Solera Cartridge Sh 12
900 series ultra-light helmets Our lightest-weight, durable, washable thermoplastic shell. Features Huntsman's "Contour Comfort" double-lock headgear and Zahnlok size adjustment system. All helmets come complete with standard shade 10 filter plate.
951P
• Nearly 24 square inches of viewing area • Big window lens for maximum visibility • Fits NexGen, Turbo, 1105VXL, 1105 VS and 1100IVXL, Solex Variable,
3000512 3000505 3004005 3004015 3004017 3000534 3000526
981P
• Molded standard •
2x4 window Fits Solera ADF
911P
• Aluminum •
glassholder Fits 1100BVL ADF
930P
• Injection molded
thermoplastic liftfront glass holder
25066 951P Sh 10 25050 951P NexGen 30089 951P Autoview 1100IVXL 33097 951P Autoview 1105VXL 33099 951P Autoview 1105VS 25209 951P Turbo 25143 951P Solex Variable
990P
• Quick-Slide
glassholder
929
• Inspectors model • Shell and lens •
3000513 25067 981P Sh 10 3000504 25049 981P Solera
3000510 25064 911P Sh 10 3000524 25141 911P 1100BVL
3000511 25065 930P Sh 10
3000514 25068 990P Sh 10
only, no head gear included Front-mounted handle
3000515 25070 929 Sh 10
HUNTSMAN ®
Customer Service 1-800-428-8185
71
A DIVISION OF JACKSON SAFETY
400 series vulcanized fiber helmets Heat-resistant vulcanized fiber shell for comfortable, cool, heavy duty welding. Lightest weight helmet in the Huntsman line. Includes Huntsman's "Contour Comfort" headgear and Zahnlock size adjustment system. All helmets come complete with standard shade 10 filter plate. Note: In some damp or wet environments, scotch guarding will prolong useful life. Not to be used for overhead welding.
451P
• Big Window lens for maximum visibility
490P "QUICKSLIDE"
411P
• Aluminum glassholder
• "Flick of the finger"
430P
• Easy to use lift-front glass holder
3000500 25030 451P Sh 10
3000509 25062 490P Sh 10
3000496 25023 411P Sh 10
3000499 25029 430P Sh 10
800 Series Leather Helmets Tough, pliable, breathable leather covering. Huntsman "Contour Comfort" headgear and Zahnlok size adjustment system.
860P
• Lift-front glassholder 3000506 25055
860P, 2x4 lift front, SH 10
860-2
• Small size helmet with lace back • No headgear 3000507 25055
851P
• Big Window lens 3000508 25056
860-2, 2x4, SH 10
851P, 5x4 big window, SH 10
700 series HELMETS Designed for use in Acetylene welding and cutting applications. Lightweight, heat-resistant vulcanized fiber shell. Shipped without filter plate. Meets CSA standards
711P
• Aluminum
glassholder
3000503 25048 711P
751P
• Big window 3000516 25071 751P
W E L DIN G
quick-slide glassholder
WELDING
www.jacksonsafety.com
cover lenses, filter plates and mag lenses PART NO: ITEM #:
DESCRIPTION
SIZE
MATERIAL
TYPE
3000658
40089
339 Cover Lens
2”x4 1/4”
Thermally set plastic
Cover Lens
3000660
40093
339-L Cover Lens
4 1/2” x 5 1/4”
Thermally set plastic
Cover Lens
3000637
40013
235-4 Back Cover Plate
4 1/2” x 5 1/4”
.040” Polycarbonate
Back Cover Plate
NexGen Back Cover Plate
N/A
Polycarbonate
Back Cover Plate
3002739 3000647
40048
355-6 Safety/Cover Plate
2 5/8”x4 1/4”
Polycarbonate
Safety/Cover Lens
3000638
40015
235-6 Safety/Cover Plate
4 1/2”x 5 1/4”
.060” Polycarbonate
Safety/Cover Lens
3000689
40168
435-6 Safety/Cover Plate
2” x 4 1/4”
.060” Polycarbonate
Safety/Cover Lens
3000691
40173
427 Filter Lens Sh. 5
2” x 4 1/4”
Polycarbonate
Filter Lens
3000644
30035
427 Filter Lens Sh. 9
2” x 4 1/4”
Polycarbonate
Filter Lens
3000645
40037
427 Filter Lens Sh. 10
2” x 4 1/4”
Polycarbonate
Filter Lens
3000690
40177
427 Filter Lens Sh. 11
2” x 4 1/4”
Polycarbonate
Filter Lens
3000646
40041
427 Filter Lens Sh. 12
2” x 4 1/4”
Polycarbonate
Filter Lens
3000649
40058
1127 Filter Lens Sh. 9
4 1/2” x 5 1/4”
Polycarbonate
Filter Lens
3000650
40059
1127 Filter Lens Sh. 10
4 1/2” x 5 1/4”
Polycarbonate
Filter Lens
3000651
40060
1127 Filter Lens Sh. 11
4 1/2” x 5 1/4”
Polycarbonate
Filter Lens
3000652
40061
1127 Filter Lens Sh. 12
4 1/2” x 5 1/4”
Polycarbonate
Filter Lens
3000684
40156
1227 Filter Lens Sh. 4
50 MM Round
Polycarbonate
Filter Lens
3000685
40157
1227 Filter Lens Sh. 5
50 MM Round
Polycarbonate
Filter Lens
3000686
40158
1227 Filter Lens Sh. 6
50 MM Round
Polycarbonate
Filter Lens
3000675
40144
M10 Magnifying Plate
Focal Power 1.0
Polycarbonate
Mag Lens
3000681
40151
M125 Magnifying Plate
Focal Power 1.25
Polycarbonate
Mag Lens
3000676
40145
M15 Magnifying Plate
Focal Power 1.5
Polycarbonate
Mag Lens
3000682
40152
M175 Magnifying Plate
Focal Power 1.75
Polycarbonate
Mag Lens
3000677
40146
M20 Magnifying Plate
Focal Power 2.0
Polycarbonate
Mag Lens
3000683
40153
M225 Magnifying Plate
Focal Power 2.25
Polycarbonate
Mag Lens
3000678
40147
M25 Magnifying Plate
Focal Power 2.5
Polycarbonate
Mag Lens
3002724
46-H Glass Lens Sh. 5, PR
50MM
Glass
Filter Lens
3002724
53-H Glass Lens Sh. 5
2” x 4.25”
Glass
Filter Lens
3002728
53-H Glass Lens Sh. 9
2” x 4.25”
Glass
Filter Lens
3002729
53-H Glass Lens Sh. 10
2” x 4.25”
Glass
Filter Lens
3002730
53-H Glass Lens Sh. 11
2” x 4.25”
Glass
Filter Lens
3002731
53-H Glass Lens Sh. 12
2” x 4.25”
Glass
Filter Lens
3002732
53-H Glass Lens Sh. 13
2” x 4.25”
Glass
Filter Lens
3002733
53-H Glass Lens Sh. 14
2” x 4.25”
Glass
Filter Lens
3002749
95-H Glass Lens Sh. 9
4” x 5.25”
Glass
Filter Lens
3002750
95-H Glass Lens Sh. 10
4” x 5.25”
Glass
Filter Lens
3002751
95-H Glass Lens Sh. 11
4” x 5.25”
Glass
Filter Lens
3002752
95-H Glass Lens Sh. 12
4” x 5.25”
Glass
Filter Lens
3002753
95-H Glass Lens Sh. 13
4” x 5.25”
Glass
Filter Lens
3002754
95-H Glass Lens Sh. 14
4” x 5.25”
Glass
Filter Lens
huntSMAn ®
Customer Service 1-800-428-8185
73
A DIVISION OF JACKSON SAFETY
neW for 2007
feAtureS extreMe heAt reSiStAnCe
GoGGLe ™
• Adjustable side vents to increase •
airflow Foam lined eyecups for added comfort
3013713 3013714
the ShieLd
• Full face protection
which detaches from goggle
Rigid frame 2”x1-1/4” goggle Adjustable elastic strap Shade 5.0
3002687
3002684
WS80
• Flexible frame, fixed • •
nose pad with rubber fingers
• Shade 3.0 and 5.0 3011668 3011669
BLACK FRAME, SH 3.0 LENS BLACK FRAME, SH 5.0 LENS
WS85
• Flexible frame, lift front • 2”x1-1/4” goggle • Shade 5.0 3002696
WS80 SH 5.0
• Frameless ultra-lightweight design
WS85 SH 5.0
neW for 2007
• Hinge stops eliminate scratches • Ergonomic self-adjusting rubber
• Shade 3.0 and 5.0
• Shade 3.0 and 5.0
3013543 3013544
3013859 3013860
GUNMETAL FRAME, SH 3.0 LENS GUNMETAL FRAME, SH 5.0 LENS
30-06™ reAderS
• Sleek, sporty style • Soft touch temples • Single lens wrap-around •
™
• No-brow design increases
upward and peripheral vision
3004762 19859 BLACK FRAME, SH 3.0 LENS 3004761 19860 BLACK FRAME, SH 5.0 LENS
• Hinge stops eliminate scratches • Ergonomic self-adjusting rubber
JP-150 SH 5.0
™
Soft touch temples Sleek, sport style Lightweight construction Shade 3.0 and 5.0
MAGnuM® 3G
front 2”x1-1/4” goggle Shade 5.0
3002695
WR-60 SH 5.0
™
• • • •
lens
• Shade 5.0
construction Shade 5.0
3013933 3013968 3013969
1.5+ WELDING READERS, SH 5.0 2.0+ WELDING READERS, SH 5.0 2.5+ WELDING READERS, SH 5.0
nose pad with rubber fingers BLACK FRAME, SH 3.0 LENS BLACK FRAME, SH 5.0 LENS
uniSpeC ii™
• Wrap-around one piece lens • Side shields provide added protection
• Fits over most prescription glasses • Shade 3.0 and 5.0 3000323 3000324
DARK GREEN FRAME, SH 3.0 LENS DARK GREEN FRAME, SH 5.0 LENS
WeLdinG
MONOGOGGLE XTR SH3.0 MONOGOGGLE XTR SH5.0 THE SHIELD SH 3.0 THE SHIELD SH 5.0
• Flexible frame goggle with 50mm
WR-40 SH 5.0
Wr-60 • • • •
Jp-150
• 50mm cup goggle • Adjustable elastic strap • Shade 5.0 3002681
WILDCAT SH 3.0 WILDCAT SH 5.0
3010337 3010338 3010345 3010346
Wr-40
NOTES
www.jacksonsafety.com
Customer Service 1-800-428-8185
75
NOTE S
ALLSAFE SERVICES & MATERIALS
1859 BOWLES AVE, SUITE 200 FENTON, MO 63026 INSIDE U.S. AND CANADA INTERNATIONAL A MARK OF QUALITY
800/428-8185 FAX: 800/634-9517 636/349-1193 FAX: 636/349-9582
WWW.JACKSONSAFETY.COM
24-ASMC_0607