Table of Contents T12 Electronic and High Output Ballasts
Ballasts
gelighting.com
T8 Instant Start
Understanding T12 Electronic Ballasts........................14-2
T8 Programmed Start
ProLineŽ T12 For F20 (2 ft), F30 (3 ft), F34/F40 (4 ft) T12 Lamps........................................................ 14-3 For T12 4 ft – 8 ft Slimline Lamps............................................................................ 14-6 T12 High Output................................................................14-7 Wiring Diagrams...............................................................14-8 Case Dimensions..............................................................14-9
Programmed Start Dimming T5 Electronic Programmed Start T12 Electronic & High Output T12 Magnetic Sign Compact Fluorescent 14-1
HID Electronic & Electromagnetic
See page E-1 for warranty information.
Understanding T12 Electronic Ballasts Electronic T12 GE multivolt and dedicated voltage ProLine® T12 high-performance ballasts are designed for replacement of magnetic T12 electronic ballasts during maintenance or retrofits. GE multivolt ProLine® T12 ballasts have the same wiring and mounting requirements as standard magnetic ballasts and provide up to 20% energy savings by simply replacing the ballast. The DOE ballast ruling effective April 1, 2005, prevents the sale of 4 foot and 8 foot lamp electromagnetic ballasts that operate T12 lamps and do not meet federal ballast efficiency requirements. GE ProLine® T12 electronic ballasts meet the DOE minimum ballast efficiency requirements and also allow facility managers to reduce ballast maintenance inventories by consolidating the number of ballasts needed. GE ProLine® T12 ballasts operate both energysaving and standard wattage lamps and are also multi-voltage (120-277V). With 2 ballasts, the multi-voltage ProLine® T12 can consolidate over 40 different magnetic ballasts. Performance Features • GE240RSMVN and GE240RS120 comply with FCC for residential use • Low-profile and lightweight housing simplifies installation and reduces transportation costs (GE240 = 1.3 lbs. lighter than magnetic; GE260 = 5.3 lbs. lighter than magnetic)
•P arallel operation — if one lamp fails, others remain lit • Significantly quieter than magnetic • High-frequency operation virtually eliminates lamp flickering typical in T12 electromagnetic systems • Five-year limited ballast warranty
Electromagnetic T12 • Complete line of ballasts for 2-to-8 foot lamps, circleline and high-output lamps • 100% thermally protected • High-grade lamination steel assures lowest wattage loss • UL, CSA and/or cUL approved • 888-GEBALLAST on every ballast • Two-year limited ballast warranty
Color-Coded Ballast and Outer Box Labels 120V – Yellow 277V – Red Packaging • Standard 10 packs • IP Packs – individually packed with instructions • DIY – shrink-wrapped and tray-packed with instructions
GE Ballast LFL magnetic nomenclature
G E M - 2 GE Ballast M = Electromagnetic Ballast GEH = HID Maximum number of lamps supported by this ballast: 1, 2, 3, 4
14-2
3 2 - H O - R S - 1 2 0 - D I Y Lamp Watts (Primary Lamp) T8 = 32 – 4 foot, 59 – 8 foot T12 = 40 – 4 foot, 60 – 8 foot T12 Electronic = 40 – 2-4 foot, 2 pin 60 – 4-8 foot, 1 pin 96 – 4-8 foot HO, 2 pin T12 Magnetic = 40 – 2-4 foot, 2 pin 96 – 4-8 foot, 2 pin
IS = Instant Start, default if not shown RS = Rapid Start PH = Preheat PT= Preheat/Trigger H = Hybrid D50 = Dimming (min level) = High Output HO VHO = Very High Output
120V – Yellow 277V – Red 220V – Green 240V – Orange 347 – Gray
Pack Type IP = Individual corrugated box per ballast 84T = Pallet bulk pack (84=840, 42=420 ballasts) DIY = Shrinkwrap ballast in tray pack DIY72 = Shrinkwrap ballast in pallet pack (Qty) No extension = 10 pack
See page E-1 for warranty information.
ProLine T12 T12 Electronic and High Output Ballasts For F20 (2 ft), F30 (3 ft), F34/F40 (4 ft) T12 Lamps 74472 – GE240RS-MV-N (replaces 24107) ProLine® T12 Multivolt 120V – 277V 2 or 1 – F40 or F34T12 Rapid Start 120 to 277 “N” BF ProLine® T12
Dimensions
General characteristics
70°C (158°F) Normal Active A (20-24 decibels) Metal Auto-restart, Thermally protected
Electrical characteristics Supply Current Frequency
60 Hz
Order information Std. pack 74472
Pallet Pack
DIY Pack 74473 (replaces 24773)
IP Pack
9.5 in (241 mm) 1.3 in (33 mm) 1.18 in (30 mm) 8.9 in (226 mm) 1.18 in (30 mm) 0.3 in (8 mm) 1.06 lbs Side 18 ft 18 AWG Length (± 1 in.) 48.0 in (1219 mm) 33.0 in (838 mm) 33.0 in (838 mm) 25.0 in (635 mm) 25.0 in (635 mm)
Specifications by lamp and wattage Lamp
F40T10
F34T12
F30T12/WM
F20T12
Safety and performance
System Watts 74 73 48 48 75 72 42 42 63 62 41 41 50 50 30 30 60 58 37 37 46 45 28 29
Nom. Line Current 0.67 A 0.30 A 0.41 A 0.19 A 0.63 A 0.27 A 0.35 A 0.17 A 0.56 A 0.26 A 0.35 A 0.17 A 0.42 A 0.20 A 0.26 A 0.13 A 0.31 A 0.22 A 0.31 A 0.16 A 0.39 A 0.18 A 0.24 A 0.13 A
UL Type 1 Outdoor
UL Type HL
System Ballast Factor 0.89 0.89
Ballast Efficacy Factor 1.20 1.22
0.88 0.88
1.17 1.22
0.87 0.87
1.38 1.40
0.95 0.95
1.90 1.90
0.95 0.95
1.58 1.64
1.00 1.00
2.17 2.22
UL Class P
NRCan
Power Factor% (>=) 99 97 99 95 99 94 99 88 99 96 99 94 99 91 99 82 99 96 99 94 99 94 99 92
FCC Part 18 Class B at 120 volts
cUL Listed
Crest Factor (<=) 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
THD% (<=) 6 10 7 10 7 16 10 16 7 10 8 11 9 18 12 27 7 10 8 11 8 11 9 17
Min. Starting Temp (°F/°C) 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10 50.0/10
T12 Electronic & High Output
F30T12
Line Volts 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277
T5 Electronic Programmed Start
F40T12
# of Lamps 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1
Programmed Start Dimming
Wiring diagram – LFL PS2 – see example on page 14-8 Case dimensions – Ref Drawing B1 – see page 14-9 Length (L) Width (W) Height (H) Mounting dimensions Mount Length (M) Mount Width (X or F) Mount Slots (MS) Weight Exit Type Remote mounting distance to lamp Remote Mounting Wire Gauge Lead lengths Yellow Blue Red Black White
Electronic – Programmed/ Rapid Start Rapid start Parallel 10%
T8 Programmed Start
Ballast Type Starting Method Lamp Wiring Line Voltage Regulation (+/-) Ambient Temperature (MAX) Case Temperature (MAX) Ballast Factor Power Factor Correction Sound Rating Enclosure Type Additional Info
T8 Instant Start
• High-performance electronic ballast for all general fluorescent applications • Multi-voltage technology handles voltage from 120 to 277V • Light weight, low-profile housing • Parallel lamp operation means system maintenance is easier to manage
Ballasts
gelighting.com ®
UL Listed RoHS compliant
T12 Magnetic Sign Compact Fluorescent 14-3
HID Electronic & Electromagnetic
See page E-1 for warranty information.
ProLine® T12 T12 Electronic and High Output Ballasts For F20 (2 ft), F30 (3 ft), F34/F40 (4 ft) T12 Lamps 97498 – GE240RS120
• High-performance electronic ballast for all general fluorescent applications • Light weight, low-profile housing
ProLine® T12 120V 2 – F40 or F34T12 Rapid Start 120V “N” BF ProLine® T12
General characteristics
Dimensions
Ballast Type Starting Method Lamp Wiring Line Voltage Regulation (+/-) Ambient Temperature (MAX) Case Temperature (MAX) Ballast Factor Power Factor Correction Sound Rating Additional Info
Electronic – Programmed / Rapid Start Rapid start Series 10% 221°F (105°C) 70°C (158°F) Normal Passive A (20-24 decibels) Auto-restart, Thermally protected
Wiring diagram – LFL PS2 – see example on page 14-8 Case dimensions – Ref Drawing B1 – see page 14-9 Length (L) Width (W) Height (H) Mounting dimensions Mount Length (M) Mount Width (X or F) Mount Slots (MS) Weight Exit Type Remote Mounting Distance to Lamp Remote Mounting Wire Gauge Lead lengths White and Black Blue and Red Yellow Yellow
Electrical characteristics Supply Current Frequency
50 Hz/60 Hz
Order information Std. pack 97498
Pallet Pack
DIY Pack 97499
IP Pack
9.5 in (241 mm) 1.3 in (33 mm) 1.0 in (25 mm) 8.9 in (226 mm) 0.9 in (22 mm) 0.3 in (8 mm) 1.38 lbs Side 18 ft 18 AWG Length (± 1 in) 25 in (635 mm) 33 in (838 mm) 48 in (1219 mm) 36 in (914 mm)
Specifications by lamp and wattage Lamp F25T12 FT36W/4P F34T12 F30T12 F12T9 F8T9 F16T9
# of Lamps 2 2 2 2 2 2 1 1 1
Line Volts 120 120 120 120 120 120 120 120 120
System Watts 73 70 63 62 59 59
Safety and performance
CSA
Nom. Line Current 0.62 A 0.60 A 0.54 A 0.53 A 0.50 A 0.50 A
UL Type 1 Outdoor
System Ballast Factor 1.10 0.58 0.85 0.85 0.92 0.53
ANSI – 62.41
UL Type HL
Ballast Efficacy 1.50 0.82 1.34 1.37 1.55 0.89
Power Factor % (>=) 1 0.98 98 96 0.92 0.95
FCC Part 18 Class B at 120 volts
UL Class P
Crest Factor (<=) 1.7 1.7 1.7 1.7 1.7 1.7
ANSI – C82.11
THD (<=) 20 20 20 25 25 0.53
UL Listed
Min. Starting Temp (°F/°C) 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 NRCan
75672 – GE140RS120 ProLine® T12 120V 1 - F40 or F34T12 Rapid Start Electronic 120V “N” BF ProLine® T12
General characteristics
Dimensions
Ballast Type Starting Method Lamp Wiring Line Voltage Regulation (+/-) Ambient Temperature (MAX) Case Temperature (MAX) Ballast Factor Power Factor Correction Sound Rating Additional Info
Electronic – Programmed/ Rapid Start Rapid start Parallel 10% 105°F (41°C) 75°C (167°F) Normal Active A (20-24 decibels) End-of-Life Protection (EOL), Thermally protected
Wiring diagram – LFL 2 – see example on page 14-8 Case dimensions – Ref Drawing 29 – see page 14-9 Length (L) 6.46 in (164 mm) Width (W) 1.37 in (35 mm) Height (H) 1.0 in (25 mm) Mounting dimensions Mount Length (M) 6.0 in (152 mm) Mount Width (X or F) 1.37 in (35 mm) Mount Slots (MS) Weight Exit Type Side Remote Mounting Distance to Lamp Remote Mounting Wire Gauge Lead lengths* Length (± 1 in) Blue and Red 25 in (635 mm) White and Black 15 in (381 mm) * See gelighting.com for wire lengths. Different for 10 pg vs. DIY pack.
Electrical characteristics Supply Current Frequency
50 Hz/60 Hz
Order information Std. pack 75672
Pallet Pack
DIY Pack 72110
IP Pack
Specifications by lamp and wattage Lamp F40T12/40W F40T12/25W F34T12/34W F30T12/30W
# of Lamps 1 1 1 1
Line Volts 120 120 120 120
Safety and performance
14-4
System Watts 36 36 30 28
Nom. Line Current 0.53 A 0.53 A 0.45 A 0.41 A
Meets FCC Part 18 (Class B) Consumer Limits
System Ballast Factor 0.88 1.33 0.88 0.93 cUL Listed
Ballast Efficacy Factor 2.44 3.69 2.93 3.32
UL Listed
Power Factor % (>=) 57 57 55 58
Crest Factor (<=) 1.58 1.54 1.50 1.51
THD (<=) 150 150 150 150
Min. Starting Temp (°F/°C) 0 / -18 0 / -18 0 / -18 0 / -18
ANSI 62.41
See page E-1 for warranty information.
ProLine T12 T12 Electronic and High Output Ballasts For F20 (2 ft), F30 (3 ft), F34/F40 (4 ft) T12, F40T10 Lamps 24109 – GE340RS-MV-N ProLine® T12 Multivolt 120V – 277V 3 or 2 – F40 or F34T12 Rapid Start 120 to 277 ProLine® T12
General characteristics
Dimensions Electronic – Programmed / Rapid Start Rapid start Parallel 10% 105°F (41°C) 70°C (158°F) Normal Active A (20-24 decibels) Auto-restart, Thermally protected
Electrical characteristics Supply Current Frequency
50 Hz/60 Hz
Order information Std. pack 24109
Pallet Pack
DIY Pack 24774
IP Pack
9.5 in (241 mm) 2.3 in (60 mm) 1.5 in (39 mm) 8.9 in (226 mm) 1.6 in (40 mm) 0.3 in (8 mm) 2.40 lbs Side 18 ft 18 AWG Length (± 1 in) 33 in (838 mm) 33 in (838 mm) 25 in (635 mm) 48 in (1219 mm)
Specifications by lamp and wattage Lamp
UL Type 1 Outdoor
UL Type HL
System Ballast Factor 0.89 0.89
Ballast Efficacy Factor 0.78 0.80
0.87 0.87
0.90 0.92
FCC – CLASS A Non-Consumer
UL Class P
Power Factor % (>=) 99 97 99 96 99 97 99 96 99 96 99 95 99 97 95 99
cUL Listed
Crest Factor (<=) 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
THD (<=) 5 11 6 12 5 12 6 13 6 12 7 13 5 12 13 6
Min. Starting Temp (°F/°C) 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10 50 / 10
T12 Electronic & High Output
Safety and performance
Nom. Line Current 0.98 A 0.43 A 0.74 A 0.33 A 90.00 A 0.39 A 0.67 A 0.30 A 0.81 A 0.36 A 0.60 A 0.27 A 0.75 A 0.33 A 0.25 A 0.55 A
T5 Electronic Programmed Start
# of Lamps Line Volts System Watts 3 120 114 3 277 111 2 120 86 F40T12 2 277 85 3 120 107 3 277 105 2 120 80 F40T10 2 277 79 3 120 96 3 277 94 2 120 71 F34T12 2 277 70 3 120 90 3 277 87 2 277 67 F30T12 2 120 66 Other compatible lamps: F30T12/WM, F40T12/WMP
Programmed Start Dimming
Wiring diagram – LFL PS3 – see example on page 14-8 Case dimensions – Ref Drawing ST – see page 14-9 Length (L) Width (W) Height (H) Mounting dimensions Mount Length (M) Mount Width (X or F) Mount Slots (MS) Weight Exit Type Remote Mounting Distance to Lamp Remote Mounting Wire Gauge Lead lengths Blue and Red Red/White White and Black Yellow
T8 Programmed Start
Ballast Type Starting Method Lamp Wiring Line Voltage Regulation (+/-) Ambient Temperature (MAX) Case Temperature (MAX) Ballast Factor Power Factor Correction Sound Rating Additional Info
T8 Instant Start
• High-performance electronic ballasts for all general fluorescent applications • Multi-voltage technology handles voltage from 120 to 277V • Lightweight, low-profile housing • Parallel lamp operation means system maintenance is easier to manage
Ballasts
gelighting.com ®
UL Listed
T12 Magnetic Sign Compact Fluorescent 14-5
HID Electronic & Electromagnetic
See page E-1 for warranty information.
ProLine® T12 T12 Electronic and High Output Ballasts For T12 4 ft – 8 ft Slimline Lamps 74474 – GE-260IS-MV-N (replaces 24108)
• High-performance electronic ballasts for all general fluorescent applications • Instant start electronic ballast for long lamp starting cycles and low initial cost • Multi-voltage technology handles voltage from 120 to 277V • Lightweight, low-profile housing • Parallel lamp operation means system maintenance is easier to manage
ProLine® T12 Multivolt 120V – 277V 2 or 1 – F96T12 Instant Start 120 to 277
Dimensions
General characteristics Ballast Type Starting Method Lamp Wiring Line Voltage Regulation (+/-) Ambient Temperature (MAX) Case Temperature (MAX) Ballast Factor Power Factor Correction Sound Rating Enclosure Type Additional Info
Wiring diagram – LFL 14 – see example on page 14-8 Case dimensions – Ref Drawing B1 – see page 14-9 Length (L) Width (W) Height (H) Mounting dimensions Mount Length (M) Mount Width (X or F) Mount Slots (MS) Weight Exit Type Remote Mounting Distance to Lamp Remote Mounting Wire Gauge Lead lengths Black White Red Blue
Electronic - Multivolt Instant Start Instant start Parallel 10 % 70 °C (158 °F) Normal Active A (20-24 decibels) Metal Auto-restart, Thermally protected
Electrical characteristics
Supply Current Frequency
50Hz/60 Hz
Order information 10 Pack 74474
Pallet Pack
DIY Pack 74475 (replaces 24776)
IP Pack
9.5 in (241 mm) 1.7 in (43 mm) 1.18 in (30 mm) 8.9 in (226 mm) 1.18 in (30 mm) 0.3 in (8 mm) 2.40 lbs Side 18 ft 18 AWG Length (± 1 in.) 25.0 in (635 mm) 25.0 in (635 mm) 59.0 in (1499 mm) 67.0 in (1702 mm)
Specifications by lamp and wattage Lamp
F96T12/WMP
F96T12/WM
F96T12
F84T12
F72T12
F64T12
F60T12
F48T12
# of Lamps 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1
Line Volts 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277 120 277
Safety and performance
14-6
System Watts 107 106 68 68 112 110 72 71 141 138 90 89 125 123 80 79 107 106 69 69 97 96 63 63 92 91 60 60 73 73 49 48
Nom. Line Current 0.94 A 0.40 A 0.60 A 0.27 A 0.98 A 0.42 A 0.63 A 0.28 A 1.24 A 0.53 A 0.79 A 0.34 A 1.10 A 0.47 A 0.70 A 0.30 A 0.94 A 0.40 A 0.60 A 0.27 A 0.86 A 0.37 A 0.55 A 0.25 A 0.81 A 0.35 A 0.53 A 0.28 A 0.65 A 0.29 A 0.43 A 0.20 A
UL Type 1 Outdoor
NRCan
System Ballast Factor 0.88 0.88 1.00 1.00 0.90 0.90 1.00 1.00 0.90 0.90 1.02 1.02 0.90 0.90 1.04 1.04 0.90 0.90 1.04 1.04 0.90 0.90 1.08 1.08 0.90 0.90 1.08 1.08 0.90 0.90 1.10 1.10 UL Type HL
Ballast Efficacy Factor 0.82 0.83 1.47 1.47 0.80 0.82 1.39 1.41 0.64 0.65 1.13 1.15 0.72 0.73 1.30 1.32 0.84 0.85 1.51 1.51 0.93 0.94 1.71 1.71 0.98 0.99 1.80 1.80 1.23 1.23 2.24 2.29
FCC – CLASS A Non-Consumer
Power Factor% (>=) 99 96 99 95 99 97 99 95 99 98 99 96 99 97 99 96 99 97 99 95 99 97 99 95 99 96 99 94 99 95 99 89 UL Class P
cUL Listed
Crest Factor (<=) 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 UL Listed
THD% (<=) 8 10 10 12 8 10 10 12 8 10 10 12 8 10 10 12 8 10 10 12 8 10 10 12 8 10 10 12 8 10 10 12
Min. Starting Temp (°F/°C) 60.0/16 60.0/16 60.0/16 60.0/16 60.0/16 60.0/16 60.0/16 60.0/16 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18 0.0/-18
RoHS compliant
See page E-1 for warranty information.
T12 High Output T12 Electronic and High Output Ballasts
T8 Instant Start
75671 – GE296HO-MV-N T12 High Output ProLine® T12 Multivolt 120V – 277V 2 or 1 – F96T12 HO RS 120 to 277 Multivolt ProLine®
General characteristics
Dimensions Electronic – Programmed/ Rapid Start Rapid start Series 10% 105°F (41°C) 75°C (167°F) Normal Active A (20-24 decibels) Auto-restart, Thermally protected
Wiring diagram – LFL PS2 – see example on page 14-8 Case dimensions – Ref Drawing SL – see page 14-9 Length (L) 11.75 in (299 mm) Width (W) 2.15 in (55 mm) Height (H) 1.61 in (41 mm) Mounting dimensions Mount Length (M) 11.0 in (279 mm) Mount Width (X or F) 2.15 in (55 mm) Mount Slots (MS) Weight Exit Type Side Remote Mounting Distance to Lamp* Remote Mounting Wire Gauge * See gelighting.com for wire lengths. Different for 10 pg vs. DIY pack.
Electrical characteristics Supply Current Frequency
50 Hz/60 Hz
Std. pack 75671
Pallet Pack
DIY Pack 72109
IP Pack
Specifications by lamp and wattage Lamp F96T12/HO/ WM
F70T8 F60T12/HO F48T12/HO
Line Volts 120 277 120 277 120 277 120 277 120 277 120 277 120 277
Safety and performance
System Watts 164 164 196 196 104 104 154 154 120 119 132 132 112 113 cUL Listed
Nom. Line Current 1.38 A 0.62 A 1.65 A 0.73 A 0.88 A 0.42 A 1.30 A 0.57 A 1.17 A 0.52 A 0.50 A 0.50 A 0.95 A 0.43 A UL Listed
System Ballast Factor 0.90 0.90 0.90 0.90 0.92 0.92 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90
Ballast Efficacy Factor 0.55 0.55 0.46 0.46 0.88 0.88 0.58 0.58 0.75 0.76 0.68 0.68 0.80 0.80
Power Factor % (>=) 99 99 99 97 99 95 99 96 99 97 96 96 99 95
Crest Factor (<=) 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
THD% (<=) 10 10 10 10 15 15 10 10 10 10 10 10 15 15
Min. Starting Temp (°F/°C) 60.0/16 60.0/16 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29 -20.0/-29
T5 Electronic Programmed Start
F96T12/HO F72T12/HO
# of Lamps 2 2 2 2 1 1 2 2 2 2 2 2 2 2
Programmed Start Dimming
Order information
T8 Programmed Start
Ballast Type Starting Method Lamp Wiring Line Voltage Regulation (+/-) Ambient Temperature (MAX) Case Temperature (MAX) Ballast Factor Power Factor Correction Sound Rating Additional Info
Ballasts
gelighting.com
FCC Part 18 (Class A) Non Consumer
T12 Electronic & High Output T12 Magnetic Sign Compact Fluorescent 14-7
HID Electronic & Electromagnetic
See page E-1 for warranty information.
Wiring Diagrams T12 Electronic and High Output Ballasts LFL PS2
LFL PS3
LFL 14
LFL 2
14-8
See page E-1 for warranty information.
Case Dimensions T12 Electronic and High Output Ballasts
T8 Programmed Start
SL
T12 Electronic & High Output T12 Magnetic
Sign
Compact Fluorescent
HID Electronic & Electromagnetic
14-9
See page E-1 for warranty information.
T5 Electronic Programmed Start
D10, 15, 29
Programmed Start Dimming
B1
T8 Instant Start
ST
Ballasts
gelighting.com
T12 Electronic and High Output Ballasts Notes
14-10
See page E-1 for warranty information.