Camel Industrial Catalog

Page 1

Industrial Products Catalog - December 2006

7525 North Oak Park Ave., Niles, IL 60714 Ph: 800-447-4248 • Fax: 800-447-3731 http://www.cgwheels.com ©2006 CGW-Camel Grinding Wheels, USA

#99001


Surface Grinding Wheel Safety Ring Test

• Always perform a ring test on a grinding wheel before mounting it. The ring test will locate an invisible crack.

CGW - CAMEL GRINDING WHEELS

• If the wheel is cracked the ring will be dull. DO NOT USE DAMAGED WHEELS.

45°

45°

45°

45°

Striking Points

Warning! Grinding Wheels Improperly Used Are Dangerous

Grinding is a safe operation if the few basic rules listed below are followed. These rules are based on material contained in the ANSI B7.1 Safety Requirements for “Use, Care and Protection of Abrasive Wheels.” For your safety, we suggest you benefit from the experience of others and carefully follow these rules.

Surface Grinding Wheel Safety

• If a sharp distinct ring is heard the wheel is safe.

Safe Operating Instructions

ALWAYS USE A GUARD WEAR EYE PROTECTION CGW, Camel Grinding Wheels plant in Kibbutz Sarid, Israel

CGW-Camel Grinding Wheels is one of the world’s leading suppliers of grinding wheels since 1956. Providing superior quality products and service at competitive prices has led to our rapid world wide growth. We invite you to contact us. You’ll immediately realize the advantages CGW offers: • Shipments within 24 hours on all catalog items • The largest vitrified grinding wheel inventory in the industry • Exceptional efforts to meet all your special application needs In addition, our quality control procedures comply with oSa and the requirements of ISO 9001. These are just some of the reasons that, “There’s more to our wheels than just the wheel.”

oSa – The Missing Element for Safety CGW-Camel Grinding Wheels, is a proud member of the international organization oSa (www.osa-abrasives.org). oSa – the Organization for the Safety of Abrasives – is a society formed by leading international abrasive manufacturers to ensure the quality of their products is consistently high and adheres to standards to minimize risks to product users. In the year 2000, a collective of European abrasive manufacturers recognized the need for global abrasive safety requirements and created oSa. oSa members voluntarily agree to manufacture market safe and accident-preventing quality abrasives in accordance with European safety standards and oSa testing regulations. oSa member products are monitored for conformity with the most up-to-date standards and provisions. Products marked with the oSa logo reflect high-grade production and high safety test standards. As a member of oSa, CGW excels at minimizing the potential for risk by controlled production, adherence to and implementation of quality assurance measures and thorough in-company production. When purchasing bonded abrasive products, insist the manufacturer is an official oSa member for quality, safe products.

COMPLY WITH ANSI CODE B7.1 AND OSHA REGULATIONS DO NOT EXCEED MAXIMUM SAFE SPEED MARKED ON WHEEL 1. DO always HANDLE AND STORE wheels in a CAREFUL manner.

1. DON’T use a cracked wheel or one that HAS BEEN DROPPED or has become damaged.

2. DO VISUALLY INSPECT and ring test all wheels before mounting for possible damage.

2. DON’T FORCE a wheel onto the machine OR ALTER the size of the mounting hole–if wheel won’t fit the machine, get one that will.

3. DO CHECK MACHINE SPEED against the established maximum safe operating speed marked on the wheel. 4. DO CHECK MOUNTING FLANGES for equal and correct diameter. 5. DO USE MOUNTING BLOTTERS when supplied with wheels.

3. DON’T ever EXCEED MAXIMUM OPERATING SPEED established for the wheel. 4. DON’T use mounting flanges on which the bearing surfaces ARE NOT CLEAN, FLAT AND FREE OF BURRS.

6. DO be sure WORK REST is properly adjusted. (Center of wheel or above; no more than 1/8" away from wheel.)

5. DON’T OVERTIGHTEN the mounting nut EXCESSIVELY.

7. DO always USA A SAFETY GUARD covering at least one-half of the grinding wheel.

7. DON’T start the machine until the WHEEL GUARD IS IN PLACE.

8. DO allow NEWLY MOUNTED WHEELS to run at operating speed, with a guard in place, for at least one minute before grinding.

8. DON’T JAM work into the wheel.

9. DO always WEAR SAFETY GLASSES or some type of eye protection when grinding.

10. DON’T FORCE GRINDING so that motor slows noticeably or work gets hot.

6. DON’T grind the SIDE OF THE WHEEL (see Safety Code for B7.1 for exception).

9. DON’T STAND DIRECTLY IN FRONT of a grinding wheel whenever a grinder is started.

10. DO TURN OFF COOLANT before stopping wheel to avoid creating an out-of-balance condition.

All Items – Same Day Shipping

All Items – Same Day Shipping

63


Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Surface Grinding Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 14 16 18 21 22 24 27

Mattison-Thompson Surface Grinding Wheels & Segments. . . 29 Centerless, Cylindrical, & Feed Regulating Wheels. . . . . . . . . 35 Tool & Cutter Wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

CGW - CAMEL GRINDING WHEELS

AS3 – Ceramic Aluminum Oxide Grain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32A – Mono-Crystalline Aluminum Oxide Grain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AZ – Premium Blue Aluminum Oxide Grain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RA – Ruby Aluminum Oxide Grain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PA – Pink Aluminum Oxide Grain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WA – White Aluminum Oxide Grain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GC – Green Silicon Carbide Grain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bench & Pedestal Wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Mounted Points, Dressing Wheels, Sticks & Hones . . . . . . . . 53 Resin Cones, Plugs & Cup Wheels . . . . . . . . . . . . . . . . . . . . . 54 Saturn Creep-Feed Grinding Wheels. . . . . . . . . . . . . . . . . . . . 55 Die Grinder Cut-Off Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Tool Room Cut-Off Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

CGW, Camel Grinding Wheels also has a catalog for the following products: Flap Discs, Semiflex Sanding Discs, Quickie Cut Cut-Off Wheels, 7-20’ General Purpose Cut-Off Wheels, Depressed Center Wheels, Resin Fibre Discs, Flap Wheels, Quick Change Coated and Non-Woven Discs.

All Items – Same Day Shipping


CGW - CAMEL GRINDING WHEELS

Analysis of typical wheel specifications

UPC item No. 34633

7 x 1/2 x 11/4 RA 46H 8V

MAXIMUM OPERATING SPEED

MOS 3600 RPM

Abrasives for Vitrified Wheels A: Regular Aluminum Oxide 94A: Semi-Friable Alumlnum Oxide AS3: 30% Ceramic Aluminum Oxide AZ: Premium Blue Aluminum Oxide PA: Pink Aluminum Oxide RA: Ruby Alumium Oxide 83A, WA: White Aluminum Oxide GC: Green Silicon Carbide 91A: White & Regular Aluminum Oxide 72C, C: Black Silicon Carbide Abrasives for Resin Wheels AO: Aluminum Oxide C: Silicon Carbide WA: White Aluminum Oxide ZA: Zirconia

E

ST

RU BO CTU ND RE

ZE AD

GR

GR

AI

N

SI

VE SI RA AB

W

HE

EL

SI

ZE

7 x 1 / 2 x 1 1 / 4 RA 46H 8V Grain Size Coarse: 8, 10, 12, 14, 18, 20, 24 Med: 30, 36, 46, 54, 60 Fine: 80, 100, 120, 150, 180 Very-Fine: 220, 240, 280, 320, 400, 600 Grade Soft: B, D, E, F, G, H Med: I, J, K, L, M, N Hard: O, P, Q, R, S, T Structure DENSE 3 4 5 6

7

8

9

Bond V, V18, V32A: Vitrified VP, V18P, VPB, VCERP: Vitrified Porous B: Resin B2: Resin Bonded BF: Reinforced Resin RX: Natural Rubber CDR: Calendered Rubber

All Items – Same Day Shipping

10

OPEN/POROUS 11 12 18


Basic Characteristics of a CGW wheel The CGW grinding wheel consists of abrasive grains held together by a bond. By varying the properties of the abrasives, the type of bond and the structure of the wheel, it is possible to produce innumerable grinding characteristics.

Bond The function of the bond is to hold the abrasive grains in a definite spacing to form a product of defined size and shape. The most commonly used bonds are: Vitrified – This bond gives rich stock removal and its rigidity is excellent for precision grinding. Resin – An organic bond which makes the wheel tougher; suited for heavy-duty operations, high operating speeds, rough grinding and cut-off applications (i.e. 1-1/2 – 20” Cutoff Wheels, 3 – 9” Depressed Center Wheels). Structure Wheel structure is the spacing of the grain in the wheel. The grain is held in position by the bond, the closer the grains (the smaller the pores), the lower the structure. The further apart the grains (the larger the pores), the higher the structure.

Closed

Open

CGW - CAMEL GRINDING WHEELS

The Abrasive There are two main categories of grain: Aluminum Oxide – For grinding high tensile steel (i.e. hardened or high speed steels) Silicon Carbide – Low tensile steels (i.e. cast iron and non-ferrous metals)

10-14 Structures 5-8 Structures CGW Grain Types A – Dark Aluminum Oxide: The most common of all grains. This grain is used for heavy-duty general purpose applications. 94A – Semi-Friable Aluminum Oxide: Used mainly in cylindrical and centerless grinding wheels. This grain can be used to grind steels in either soft or hard state. AS3: 30% Ceramic Aluminum Oxide creates a wheel with maximum grinding performance and life. Excellent for form and corner holding and down feed of .0005-.002 per pass. 32A – Mono-Crystalline Aluminum Oxide: Ideal for medium to heavy stock removal; outstanding form holding and free cutting grain. Provides maximum versatility. AZ – Blue Aluminum Oxide: Excellent at grinding HSS over 55 RC. Grinds with an exceptionally cool, fast cutting action and requires minimum dressing. RA – Red Aluminum Oxide (Ruby): This grain is harder and sharper than PA and AZ. Good for steels with a high level of chromium. PA – Pink Aluminum Oxide: Good general purpose grain that is tough, but friable. Excellent for tool room sharpening applications. 83A, WA – White Aluminum Oxide: Highly friable grain for fast, cool cutting. Good for light grinding of all kinds of steels, particularly on tool and die steels. 91A – White and Regular Aluminum Oxide: Combination of 94A and WA for general purpose work and light stock removal. GC – Green Silicon Carbide: More friable than C; for carbide grinding applications. 72C, C – Black Silicon Carbide: Shaper than Aluminum Oxide and therefore more effective grinding low tensile materials and non-ferrous metals.

All Items – Same Day Shipping


Choosing The Right Wheel

CGW - CAMEL GRINDING WHEELS

Grinding wheels are made of only three components; Grain, Bond, and Air. The ratio of these three components determines the structure and hardness of the wheel. This may appear like a simple formula, but it is more complicated than what meets the eye. There are many types of abrasive grains and these grains are offered in varying mesh sizes. There are also numerous materials to be ground and many different types of grinding - Surface, Centerless, Cylindrical, and Internal. All these factors contribute to thousands of possibilities when it comes to choosing grinding wheels. The first thing to consider in wheel selection is the material being ground. In general, high tensile steels and high speed tool steels should be ground with Aluminum Oxide grain wheels. For cast iron and non-ferrous materials like brass, copper, and bronze Silicon Carbide grain wheels are recommended. In addition wheel hardness needs to be determined. Hard grade wheels are wheels with a high percentage of bond. The more bond holding the grain together, the harder the wheel. Soft grade wheels are wheels with less bond holding the grain together. Hard grade wheels are used for longer wheel life, lower stock removal, finer finishes and on applications with a narrow contact area such as Centerless and Cylindrical grinding. Soft grade wheels are used during high stock removal applications with large contact areas such as surface grinding. If additional assistance is needed to chose the right grinding wheel, CGW’s technical staff is available to help you make the right selections.

5 Principle Types of Surface grinding 1. Horizontal Spindle, Reciprocating Table

These machines use the periphery of a straight wheel. The workpiece is mounted in a chuck that moves back and forth under the wheel. Types 1, 5, and 7 wheels are used (See CGW stock for these wheels).

2. Horizontal Spindle, Rotary Table

The workpiece is mounted in a round, rotary table that moves the work under the wheel. Types 1,5, and 7 wheels are used (See CGW stock for these wheels).

3. Vertical Spindle, Reciprocating Table

These machines use T-2 (cylinder), Type 6 (cup), or segments. As with horizontal machines, the workpiece is mounted in a chuck that moves back and forth under the wheel.

4. Vertical Spindle, Rotary Table

These machines use T-2 (cylinder) or segments. The most common machines have a single spindle with a round rotating table that carries the workpiece under the wheel.

5. Face Grinders

Describes large horizontal spindle, reciprocating table machines, where the workpiece is mounted on a vertical table ground with cylinder wheels or segments.

All Items – Same Day Shipping


Standard Wheel Shapes Type 1

Type 7

Type 27

Recessed 2 Sides

Type 5

Type 11 Flaring Cup

Raised Hub Saucer Depressed Center Wheel

Type 6

Type 12

Type 50

Recessed 1 Side

Straight Cup

Depressed Center / Flap Disc

Dish

Type 2

Plate Wheels

Type 29

CGW - CAMEL GRINDING WHEELS

Straight

Flap Disc

What are REvolutions per minute (rpm) and surface feet per minute (sfpm) If a tape measure is wrapped around a 12" wheel, the approximate measurement is 37.68" (just over 3 feet). When the 12" wheel makes one revolution, a specific point on the perimeter of the wheel travels approximately 3 feet. If the 12" wheel is mounted on a machine which runs at 2,200 RPM, the surface speed will be calculated at: 2,200 x 3 = 6,600 SFPM. In order to maintain the same grinding performance when a wheel diameter decreases it is advised to maintain constant surface speed by increasing the machine RPM. The following formula can be used: SFPM RPM = ____________________________ Wheel diameter (") x 0.262

All Items – Same Day Shipping


Comparative Marking Chart SAINT-GOBAIN

CGW - CAMEL GRINDING WHEELS

Abrasives

NORTON

TYROLIT

CARBORUNDUM TYROLIT-CINCINNATI (MILACRON)

TYROLIT (BAYSTATE)

RADIAC

Regular Aluminum Oxide Semi-Friable Aluminum Oxide Mixed Aluminum Oxide

A

A, 57A

A

A

A

A

94A

57A

GA

2A

3A

JA

DA

19A, 23A

DA

97A

2A

FA, NA

Ceramic

AS3

3SG, 5SG

3SG, 5SG

3BP, 5MSB, 3MSB

3GA, 5GA

7BW, 8BW

Mono-Crystaline Aluminum Oxide Premium Blue Aluminum Oxide Ruby Aluminum Oxide Pink Aluminum Oxide White Aluminum Oxide Mixed Aluminum Oxide/Silicon Carbide Green Silicon Carbide Black Silicon Carbide

32A

32A

32AR

32A

32A

32A

AZ

RA

48A

RA

PA

25A

PA

12A

17A

RAA

WA/83A

38A

AA

9A

9A, 48A

SA, WA

CA

AC

CA

CA

CA

CA

GC

39C

GC

5C

1C

GC

C

37C

C

6C

C

C

Special engineered vitrified wheels CGW provides wheels to industries that request “Special Engineered Vitrified Wheels”. For example, the aerospace and gas turbine industries manufacture aircraft engine blades and vanes using CGW open structure wheels. These special engineered wheels are typically used during Creep Feed Surface Grinding applications. Our R&D department is committed to finding solutions for the most difficult applications. Our Saturn wheel is an example of our dedication to superior, long lasting products (see page 55 for Saturn Wheel details). Our success in these industries, as well as the gear and bearings industries, is attributed not only to the sophisticated wheels we are capable of manufacturing, but also to the technical and logistical support that compliments them.

All Items – Same Day Shipping


CGW’s WIDE RANGE OF PRODUCTS CGW, Camel Grinding Wheels sells products for the Welding and Fabricating industries. Similar to CGW’s vitrified products, our Welding and Fabricating products are superior in performance. Some of the product lines sold in our Welding and Fabricating catalog include: • Depressed Center Wheels – 3/32", 1/8", 1/8" Pipeline

• Semiflex Sanding Discs

• Depressed Center Wheels – 1/4" Grinding

• Resin Fibre Discs

• Die Grinder Cutoff Wheels

• Rubber/Plastic Back-Up Pads

• Circular Saw Blades

• Non-Woven and Coated Quick Change Discs

• Stationary Saw Blades

• Rubber Holder Pads

• Chop Saw Blades

• Flap Wheels

• High Speed Gas Saw Blades

• Quickie Cut Cutoff Wheels

• Rail Blades • Quick Change Coated & Non-Woven Discs

All Items – Same Day Shipping

CGW - CAMEL GRINDING WHEELS

• Flap Discs



Surface Grinding Wheels

11


AS3 - Ceramic Aluminum Oxide

PRODUCT COMPARISON

• Engineered for fast metal removal with reduced dressing frequency. • Excels at grinding 50 Rockwell C and harder. • Submicron crystal structure continually fractures to produce sharp new grinding points. • Designed for heavier downfeeds and faster traverse rates with excellent form holding capabilities.

32A • Sharp mono-crystalline aluminum oxide grain with premium CGW bond offers excellent versatility and performance on a wide range of applications and materials. • Outstanding form holding wheels with free cutting grain. • Ideal for medium to heavy stock removal. • The most popular grain for tool room, surface grinding applications.

AZ - Premium Blue Aluminum Oxide • Engineered for grinding high speed steels over 55C and general purpose tool steels. • Exceptionally fast and cool cutting characteristics suitable for grinding heat sensitive, alloy steels and mold steels. • Free cutting design pulls the heat away from the part. • Friable grain for cooler grinding. Requires minimal dressing and holds its form well.

SURFACE GRINDING WHEELS

RA - Ruby Aluminum Oxide • Ideal for rough grinding of all tool steels including steel with high levels of chromium. • A tough, sharp, yet friable abrasive with high material removal rate and strong form holding capabilities. • Grain is tougher than White, AZ or Pink grain wheels.

pa - Pink Aluminum Oxide • Ideal for grinding medium and hard to grind high speed steels and alloy steels. • Sharp grain for fast, cool cutting action. • Excellent tool sharpening wheel.

WA - White Aluminum Oxide • Used when easy cutting action is needed on all surfaces. • Ideal for grinding heat-sensitive steels, as well as easy and medium to grind high speed steels. • The most friable grain choice.

12

All Items – Same Day Shipping


Surface Grinding Wheels Selection Chart SIZE - GRIT - HARDNESS

6 x 1/2 x 11/4 T1 60-K 7 x 1/4 x 11/4 T1 46-I 7 x 1/4 x 11/4 T1 60-I 7 x 1/4 x 11/4 T1 60-J 7 x 1/4 x 11/4 T1 60-K 7 x 1/4 x 11/4 T1 80-J 7 x 1/4 x 11/4 T1 80-K 7 x 1/4 x 11/4 T1 80-L 7 x 1/4 x 11/4 T1 100-K 7 x 1/4 x 11/4 T1 120-K 7 x 1/4 x 11/4 T1 150-K 7 x 1/2 x 11/4 T1 46-G 7 x 1/2 x 11/4 T1 46-H 7 x 1/2 x 11/4 T1 46-I 7 x 1/2 x 11/4 T1 46-J 7 x 1/2 x 11/4 T1 46-J/K 7 x 1/2 x 11/4 T1 46-K 7 x 1/2 x 11/4 T1 60-H 7 x 1/2 x 11/4 T1 60-I 7 x 1/2 x 11/4 T1 60-J 7 x 1/2 x 11/4 T1 60-J/K 7 x 1/2 x 11/4 T1 60-K 7 x 1/2 x 11/4 T1 60-L 7 x 1/2 x 11/4 T1 80-H 7 x 1/2 x 11/4 T1 80-K 7 x 1/2 x 11/4 T1 100-K 7 x 1/2 x 11/4 T1 120-K 7 x 1/2 x 11/4 T1 150-K 7 x 1/2 x 11/4 T1 46-H12 3 7 x /4 x 11/4 (R/1-3 x 1/4) T5 46-H 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 46-I 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 46-J 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 46-K 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-H 7 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-J 7 x 1 x 11/4 (R/1-3 x 1/2) T5 46-H 7 x 1 x 11/4 (R/1-3 x 1/2) T5 46-I 7 x 1 x 11/4 (R/1-3 x 1/2) T5 46-J 7 x 1 x 11/4 (R/1-3 x 1/2) T5 46-K 7 x 1 x 11/4 (R/1-3 x 1/2) T5 60-I 7 x 1 x 11/4 (R/1-3 x 1/2) T5 60-J 7 x 1 x 11/4 (R/1-3 x 1/2) T5 60-K 8 x 1/4 x 11/4 T1 60-J 8 x 1/4 x 11/4 T1 60-K 8 x 1/4 x 11/4 T1 80-J 8 x 1/2 x 11/4 T1 46-H 8 x 1/2 x 11/4 T1 46-I 8 x 1/2 x 11/4 T1 46-J 8 x 1/2 x 11/4 T1 46-J/K 8 x 1/2 x 11/4 T1 46-K 8 x 1/2 x 11/4 T1 60-H 8 x 1/2 x 11/4 T1 60-I 8 x 1/2 x 11/4 T1 60-J 8 x 1/2 x 11/4 T1 60-K 8 x 1/2 x 11/4 T1 80-K 3 8 x /4 x 11/4 (R/1-3 x 1/4) T5 46-H

AS3 Ceramic

32A

AZ Premium Blue

34301 34303 34308 34309 34310 34312 34313 34314 34315

34206 34207

RA Ruby

59025

PA Pink

WA White

58000

34600 34603 34604 34605 34606 34607

58001 58002 58003

58004 58005 58006

34608 34609 34610 34614 34615 34616 34617

58007 58008 58009 58010

34618 34619 34620 34621

58011

34622

59000

58012

34623 34624 34625 34626

59001

58013 58014

34317 34208 34210 34209

37700 37701 37702

34318 34319 34320

34633 34634

37703 34212

37704 37705

34213

37706

34321 34323 34324 34325 34635

37728

37729 37730 37731 37732 37733 37734

34326 34327 34328 34329 34330 34331 34332 34333 34335 34336 34337 34338

34636 34638

34341 34342 34343 34344 34345

59002

58015 58016

59003

58017

34348 34349

59004

58018

34640 34642 34647 34648 34649 34650 34652 34653

58019 58020 58021

34663 34664 34671 34672 34673

58022

34674

58023 58024 58025 58026

34676 34677 34678 34679 34683

34114 37707 37708 37709

34350 34351 34352

34214

37735

34215

37710 37711 37736

34353 34354 34355 34356 34357 34358 34359

59005 59006

12A

59007 59008 59009


Surface Grinding Wheels Selection Chart SIZE - GRIT - HARDNESS

8 x 3/4 x 11/4 (R/1-3 x 1/4) T5 46-J 8 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-I 8 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-J 8 x 3/4 x 11/4 (R/1-3 x 1/4) T5 60-K 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-H 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-I 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-J 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-J/K 8 x 1 x 11/4 (R/1-3 x 1/2) T5 46-K 8 x 1 x 11/4 (R/1-3 x 1/2) T5 60-I 8 x 1 x 11/4 (R/1-3 x 1/2) T5 60-J 8 x 1 x 11/4 (R/1-3 x 1/2) T5 60-J/K 8 x 1 x 11/4 (R/1-3 x 1/2) T5 60-K 10 x 1/2 x 3 T1 60-J 10 x 3/4 x 3 T1 46-I 10 x 3/4 x 3 T1 60-H 10 x 3/4 x 3 T1 60-I 10 x 1 x 2 T1 46-I 10 x 1 x 3 T1 46-H 10 x 1 x 3 T1 46-I 10 x 1 x 3 T1 46-J 10 x 1 x 3 T1 46-J/K 10 x 1 x 3 T1 46-K 10 x 1 x 3 T1 60-I 10 x 1 x 3 T1 60-J 10 x 1 x 3 T1 60-K 12 x 3/4 x 3 T1 46-H 12 x 3/4 x 3 T1 46-I 12 x 3/4 x 5 T1 60-J 12 x 1 x 3 T1 46-H 12 x 1 x 3 T1 46-I 12 x 1 x 3 T1 46-J 12 x 1 x 3 T1 46-J/K 12 x 1 x 3 T1 46-K 12 x 1 x 3 T1 60-I 12 x 1 x 3 T1 60-J 12 x 1 x 3 T1 60-K 12 x 1 x 5 T1 46-H 12 x 1 x 5 T1 46-J 12 x 1 x 5 T1 46-K 12 x 1 x 5 T1 60-J 12 x 1 x 5 T1 60-K 12 x 11/2 x 3 (R/1-71/2 x 1/2) T5 46-H 12 x 11/2 x 3 (R/1-71/2 x 1/2) T5 46-I 12 x 11/2 x 3 (w-71/2 x 1/2) T5 46-J 12 x 11/2 x 3 (R/1-71/2 x 1/2) T5 60-I 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-H 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-I 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-J 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-J/K 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 46-K 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 60-I 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 60-J 12 x 11/2 x 5 (R/1-71/2 x 1/2) T5 60-K 12 x 2 x 3 (R/2-71/2 x 1/2) T7 46-I 12 x 2 x 3 (R/2-71/2 x 1/2) T7 46-I

AS3 Ceramic

32A

AZ Premium Blue

RA Ruby

PA Pink

34360

58028

34685 34688 34689 34690 34695 34696 34697

58029

34698 34700 34701

34364 34366

58027

34367

WA White

59010 34369 59011 34702 34712 34380 34383 34719

37737

34387 34389 34390 34391

58030 58031

34723 34724 34725

58032

34729

59012 34217 37738

34392 34394 34395 34396 34397

34735 34219

37712

34220

37713

34409 34411 34412 34413

59013

58033 58034

34742 34743 34744

59014 34414 34416

34221

34749 37739 34222 37740 37741 37742 37743

34225

37714

34226

37715

34418 34419 34421 34422 34425 34426

34427 34428 34429

34752 34755 59015

58035

59016

58036

59017

58037 58038

34760 34761 34762 34763 34766 34769 34770 34771

59018 34430 34432 34433 37744 34434 34434 12B

34772 34774 34775 34776


Surface Grinding Wheels Selection Chart SIZE - GRIT - HARDNESS

12 x 2 x 3 (R/2-61/2 x 1/2) T7 60-J 12 x 2 x 5 (R/2-61/2 x 1/2) T7 46-H 12 x 2 x 5 (R/2-71/2 x 1/2) T7 46-I 12 x 2 x 5 (R/2-71/2 x 1/2) T7 46-J 12 x 2 x 5 (R/2-71/2 x 1/2) T7 46-J/K 12 x 2 x 5 (R/2-71/2 x 1/2) T7 60-H 12 x 2 x 5 (R/2-71/2 x 1/2) T7 60-K 14 x 1 x 3 T1 46-I 14 x 1 x 3 T1 46-J 14 x 1 x 5 T1 46-H 14 x 1 x 5 T1 46-I 14 x 1 x 5 T1 46-I/J 14 x 1 x 5 T1 46-J 14 x 1 x 5 T1 46-K 14 x 1 x 5 T1 60-I 14 x 1 x 5 T1 60-J 14 x 1 x 5 T1 60-K 14 x 11/2 x 5 T1 46-H 14 x 11/2 x 5 T1 46-I 14 x 11/2 x 5 T1 46-J 14 x 11/2 x 5 T1 46-K 14 x 11/2 x 5 T1 60-H 14 x 11/2 x 5 T1 60-I 14 x 11/2 x 5 T1 60-J 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-H 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-I 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-I/J 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-J 14 x 11/2 x 5 (R/1-8 x 1/2) T5 46-K 14 x 11/2 x 5 (R/1-8 x 1/2) T5 60-H 14 x 11/2 x 5 (R/1-8 x 1/2) T5 60-I 14 x 11/2 x 5 (R/1-8 x 1/2) T5 60-J 14 x 11/2 x 5 (R/1-8 x 1/2) T5 60-K 14 x 2 x 5 T1 46-H 14 x 2 x 5 T1 46-I 14 x 2 x 5 T1 46-J 14 x 2 x 5 T1 60-J 14 x 2 x 5 (R/1-8 x 1) T5 46-H 14 x 2 x 5 (R/1-8 x 1) T5 46-I 14 x 2 x 5 (R/1-8 x 1) T5 46-J 14 x 2 x 5 (R/1-8 x 1) T5 46-K 14 x 2 x 5 (R/1-8 x 1) T5 60-I 14 x 2 x 5 (R/1-8 x 1) T5 60-J 14 x 2 x 5 (R/1-8 x 1) T5 60-K 14 x 2 x 5 (R/2-8 x 3/8) T7 46-H 14 x 2 x 5 (R/2-8 x 3/8) T7 46-I 14 x 2 x 5 (R/2-8 x 3/8) T7 46-J 14 x 2 x 5 (R/2-8 x 3/8) T7 46-K 14 x 2 x 5 (R/2-8 x 3/8) T7 60-J 16 x 11/2 x 5 T1 46-H 16 x 11/2 x 5 T1 60-H 16 x 11/2 x 5 T1 60-J 16 x 2 x 5 T1 46-I 16 x 2 x 5 T1 46-J 16 x 2 x 5 T1 60-K

AS3 Ceramic

32A

AZ Premium Blue

37716 37717

34435 34436 34437 34438

RA Ruby

PA Pink

WA White

59019

58039 58040

34777 34778 34779

59020 34440 34443 34445

34781

34115 37745 37718

34447 34448

58048 58049

34786

59021 34232

34238 34239

37746 37719 37747 37720

34449 34450 34452 34453 34454 34456 34457 34458 34459 34460

34790 59022

58050 58041 58042

34792 34801 34802 34803

34240 34234 34235

37721 37722

34462 34464 34465

37748

34466 34467

34793 34794 59023

34236 37749 37750 37723 34241

37724 37725 37751

37726 37752 37727

34797 34798

34469 34470 34471 34472 34473 34474 34480 34481 34482 34483 34486 34487 34488 34489 34490

37753 34491 34500 34493 34495 34496 34497

12C

34795

34808 59024

58043 58044

58045 58046 58047

34809 34811 34812 34813 34814 34816 34817


Surface Grinding Wheels Tool Steel Classifications

Grindability 1 GRAIN

2

Classification of Grindability

Air-Hardening Medium Alloy Cold Work Tool Steels

A2 A3 A4 A5 A6 A7 A8 A9 A10

1 1 1 1 1 1 1 1 1

Air-Hardening Medium Alloy Cold Work Tool Steels

D1 D2 D3 D4 D5 D6 D7

2 3 2 2 2 2 4

4

Easy to Grind

Hard to Grind

AS3 32A AZ RA PA WA

Steel Type

3

AS3 32A AZ RA PA WA

Steel Type

Classification of Grindability

Steel Type

Carbon-Tungsten Tool Steels

F1 F2 F3

2 2 2

H10 H11 H12 H13 H14 H16 H17

1 1 1 1 1 1 1

H41 H42 H43

H20 H21 H22 H23 H24 H25 H26

1 1 1 1 1 1 1

2 2 2

Low-Alloy Special Purpose Tool Steels

Tungsten Hot Work Tool Steels

Steel Type

Molybdenum Hot Work Tool Steels

Chromium Hot Work Tool Steels

Classification of Grindability

L1 L2 L3 L4 L5 L6 L7

1 1 1 1 1 1 1

Molybdenum High-Speed Tool Steels

M1 M2 M3 M4

2 2 3 4

Classification of Grindability

Steel Type

Molybdenum High-Speed Tool Steels (cont.)

M6 M7 M8 M10 M15 M20 M25 M30 M33 M34 M35 M40 M41 M42 M43 M44 M45 M50 M52

12D

3 3 2 2 4 2 2 2 3 3 3 3 3 3 3 3 3 3 3

Classification of Grindability

Steel Type

Oil-Hardened Cold Work Tool Steels

O1 O2 O6 O7

1 1 1 1 Mold Steels

P1 P2 P3 P4 P5 P6 P20 P21

1 1 1 1 1 1 1 1

Shock-Resisting Tool Steels

S1 S2 S3 S4 S5 S6 S7

1 1 1 1 1 1 1

Classification of Grindability

Tungsten High-Speed Tool Steels

T1 T2 T3 T4 T5 T6 T7 T8 T9 T15 T20

2 2 3 2 3 3 2 2 4 4 4

Water-Hardening Tool Steels

W1 W2 W3 W4 W5 W7

1 1 1 1 1 1


Surface Wheel Starting Guide Material

Grade

AS3 RA 32A AZ PA WA

46 46 46 46 46 46

H, I J/K J H J J

AS3 RA 32A AZ PA WA

46 46 46 46 46 46

J J/K J J J J

AS3 RA 32A AZ PA WA

46 46 46 46 46 46

H, I H I I H H

AS3 RA 32A AZ PA WA

46 46 46 46 46 46

H, I J/K I J J H

Hard Steel - 55 RC & Harder Maximum Stock Removal High Stock Removal Medium Stock Removal Light Stock Removal Stainless Steel - 300 Series Maximum Stock Removal High Stock Removal Medium Stock Removal Light Stock Removal Stainless Steel - 400 Series Maximum Stock Removal High Stock Removal Medium Stock Removal Light Stock Removal High Speed Steel Maximum Stock Removal High Stock Removal Medium Stock Removal Light Stock Removal Surface Grinding Tips

There are many applications in surface grinding, from heavy stock removal to a very precise finish and size requirements. Matching the right wheel with the application is very important to achieve the needs of the grinder. There are many ways to meet these needs. If a fine finish is required a finer wheel may be used. Many times an operator may use one wheel to do the job of many changing the speed and feed of the wheel.

SURFACE GRINDING WHEELS

Grit Size

PRODUCT COMPARISON

Abrasive Grain

Grit Size / Grain Size Combinations

Grit Size: All abrasives are sized to a national standard and are assigned a numerical designation. The higher the number, the finer the grit size. When selecting grit size, the following should be considered: Use Coarse Grit: • For rapid stock removal Use Fine Grit: • For form holding • For large areas of contact • For small areas of contact • When finish is not important • For fine finishes • For softer materials • For hard, brittle materials

General Grain Size Selections Grain Finish (Rms) 46 Over 32 54 20 - 32 60 15 - 20

Grain 80 100

Finish (Rms) 12 - 18 10 - 15

Grain 120 150

Finish (Rms) 8 - 12 6 - 10

All Items – Same Day Shipping

13


AS3 Grain Surface and toolroom grinding wheels AS3 – Ceramic Aluminum Oxide Grain Our AS3 wheels feature a 30% advanced Cubitron™ 321 Ceramic content that delivers cooler cuts on harder surfaces for maximum performance and life. • Engineered for fast metal removal with reduced dressing frequency. • AS3 grain wheels feature the highest metal removal rate compared to conventional Aluminum Oxide wheels. • Excels at grinding 50 Rockwell C and harder. • Submicron crystal structure continually fractures to produce sharp new grinding points. • Designed for heavier downfeeds and faster traverse rates with excellent form holding capabilities.

SURFACE GRINDING WHEELS

as3 grain

4"-14" Diameter Grinding Wheels

14

All Items – Same Day Shipping


AS3: Ceramic Aluminum Oxide Grain

4/3 x 11/2 x 11/4

TYPE 11

6685 RPM

TYPE 1

12 x 1 x 3

2228 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34200 34201

AS3-46-I-VCER AS3-60-K-VCER

2 2

4 4

34219 34220 34221

AS3-46-H-VCER AS3-46-J-VCER AS3-60-I-VCER

2 2 2

4 4 4

5/33/4 x 13/4 x 11/4

TYPE 11

5348 RPM

UPC#

SPEC.

CARTON

UNIT

34203 34204

AS3-46-I-VCER AS3-60-J-VCER

2 2

4 4 3760 RPM

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34222

AS3-46-H-VCER

2

4

12 x 1 /2 x 5 ____________ R/1 - 71/2 x 1/2

TYPE 5

1

2228 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34206 34207

AS3-60-K-VCER AS3-80-K-VCER

2 2

4 4

34225 34226

AS3-46-H-VCER AS3-46-J-VCER

2 2

4 4

TYPE 1

7 x 1/2 x 11/4

3760 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

34208 34210 34209 34212 34213

AS3-46-H-VCER AS3-46-I-VCER AS3-46-J-VCER AS3-60-J-VCER AS3-60-K-VCER

2 2 2 2 2

4 4 4 4 4

34115

TYPE 1

8 x 1/4 x 11/4

3600 RPM

TYPE 1

14 x 1 x 3

1910 RPM

SPEC.

CARTON

UNIT

AS3-46-J-VCER

2

6

TYPE 1

14 x 1 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34232

AS3-46-J-VCER

1

4

14 x 1 /2 x 5 ____________ R/1 - 8 x 1/2

TYPE 5

1

1910 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34114

AS3-60-J-VCER

2

4

34234 34235 34236

AS3-46-H-VCER AS3-46-I-VCER AS3-60-I-VCER

2 2 2

4 4 4

TYPE 1

8 x 1/2 x 11/4

3600 RPM

SPEC.

CARTON

UNIT

AS3-46-K-VCER AS3-60-J-VCER

2 2

4 4

TYPE 1

10 x 1 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34217

AS3-46-K-VCER

1

3

TYPE 1

14 x 11/2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34238 34239 34240

AS3-46-H-VCER AS3-46-J-VCER AS3-60-I-VCER

2 2 2

4 4 4

14 x2x5 __________

TYPE 5

1910 RPM

R/1 - 8 x 1 UPC#

SPEC.

CARTON

UNIT

34241

AS3-46-H-VCER

2

4

• Other sizes/grits available as special make wheels.

All Items – Same Day Shipping

SURFACE GRINDING WHEELS

UPC#

34214 34215

as3 grain

TYPE 1

7 x 1/4 x 11/4

TYPE 1

12 x 1 x 5

15


32A Grain Surface grinding wheels

SURFACE GRINDING WHEELS

32A grain

7"-14" Diameter Grinding Wheels

32A Grain • Sharp and exceedingly strong mono-crystalline aluminum oxide grain with premium CGW bond offers excellent versatility and performance on a wide range of applications and materials with moderate to heavy feeds. • Grinds with exceptionally cool, fast cutting action, with a minimum of dressing and outstanding form holding. • Ideal for medium to heavy stock removal. • The most popular grain for tool room, surface grinding applications.

32A ID (INTERNAL DIMENSION) wheels • For grinding inside surfaces of bearings, rings, cylinders, barrels, and bores. • Designed for concentricity, precision, rigidity, and efficiency. 32A ID (Internal Dimension) Wheels

16

UPC#

SPEC.

RPM

CARTON

UNIT

59050 59051 59052 59053 59054 59055 59056 59057

/4 x 3/4 x 1/4 (3/8 x 3/8) 32A60-J8-V 1 x 1 x 1/4 T5 (1/2 x 1/2) 32A60-J8-V 1 x 1 x 3/8 T5 (1/2 x 1/2) 32A60-J8-V 11/4 x 1 x 3/8 T5 (5/8 x 1/2) 32A60-J8-V 11/2 x 1 x 3/8 T5 (5/8 x 1/2) 32A60-J8-V 11/2 x 1 x 3/8 T5 (3/4 x 1/2) 32A60-J8-V 2 x 1 x 3/8 T5 (3/4 x 3/8) 32A60-J8-V 2 x 11/2 x 5/8 T5 (1 x 3/4) 32A60-J8-V

33,500 26,800 26,800 20,900 16,750 16,750 13,400 13,400

20 20 20 20 20 20 20 20

40 40 40 40 40 40 40 40

3

All Items – Same Day Shipping


32A: 32A Grain TYPE 1

7 x 1/2 x 11/4

3760 RPM

12 x 1 /2 x 5 ____________ R/1 - 71/2 x 1/2

TYPE 5

1

2228 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

37700 37701 37702 37703 37704 37705 37706 37728

32A46-H8-V 32A46-I8-V 32A46-J8-V 32A46-K8-V 32A60-I8-V 32A60-J8-V 32A60-K8-V 32A80-K8-V

10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20

37714 37715 37744

32A46-H8-V 32A46-J8-V 32A60-K8-V

2 2 2

4 4 4

3

TYPE 5

1

3760 RPM

TYPE 7

2228 RPM

UPC#

SPEC.

CARTON

UNIT

37716 37717

32A46-H8-V 32A46-I8-V

1 1

2 2

TYPE 1

14 x 1 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

37729 37730 37731

32A46-H8-V 32A46-J8-V 32A60-J8-V

10 10 10

20 20 20

37745 37718 37746

32A46-H8-V 32A46-I8-V 32A60-K8-V

2 2 2

4 4 4

7 x 1 x 11/4 ____________

TYPE 5

3760 RPM

R/1 - 3 x 1/2

TYPE 1

14 x 11/2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

37732 37733 37734

32A46-H8-V 32A46-J8-V 32A60-J8-V

10 10 10

20 20 20

37719 37747 37720

32A46-H8-V 32A46-I8-V 32A46-J8-V

2 2 2

4 4 4

TYPE 1

8 x 1/2 x 11/4

3600 RPM

14 x 11/2 x 5 ____________

TYPE 5

1910 RPM

R/1 - 8 x 1/2

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

37707 37708 37709 37735 37710 37711 37736

32A46-H8-V 32A46-I8-V 32A46-J8-V 32A46-K8-V 32A60-J8-V 32A60-K8-V 32A80-K8-V

10 10 10 10 10 10 10

20 20 20 20 20 20 20

37721 37722 37748 37749

32A46-H8-V 32A46-I8-V 32A46-K8-V 32A60-J8-V

2 2 2 2

4 4 4 4

TYPE 1

10 x 1 x 3

2630 RPM

UPC#

SPEC.

CARTON

UNIT

37737 37738

32A46-J8-V 32A60-J8-V

5 5

10 10

TYPE 1

12 x 1 x 3

2190 RPM

UPC#

SPEC.

CARTON

UNIT

37712 37713 37739

32A46-H8-V 32A46-J8-V 32A60-K8-V

2 2 2

4 4 4

TYPE 1

12 x 1 x 5

2228 RPM

UPC#

SPEC.

CARTON

UNIT

37740 37741 37742 37743

32A46-J8-V 32A46-K8-V 32A60-J8-V 32A60-K8-V

2 2 2 2

4 4 4 4

TYPE 1

1910 RPM

UPC#

SPEC.

CARTON

UNIT

37750 37723

32A46-H8-V32A 32A46-J8-V32A

1 1

2 2

14 x2x5 __________ R/1 - 8 x 1

TYPE 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

37724 37725 37751 37726

32A46-H8-V 32A46-I8-V 32A46-J8-V 32A60-K8-V

1 1 1 1

2 2 2 2

14 x2x5 __________ R/2 - 8 x 3/8

TYPE 7

SURFACE GRINDING WHEELS

UPC#

14 x 2 x 5

32A grain

7 x /4 x 1 /4 ____________ R/1 - 3 x 1/4

12 x2x5 ____________ R/2 - 71/2 x 1/2

1910 RPM

UPC#

SPEC.

CARTON

UNIT

37752 37727 37753

32A46-H8-V 32A46-I8-V 32A60-J8-V

1 1 1

2 2 2

• Other sizes/grits available as special make wheels.

All Items – Same Day Shipping

17


AZ – Premium Blue Aluminum Oxide Grain SURFACE GRINDING WHEELS 18

Premium blue aluminum Grain Surface grinding wheels 6"-16" Diameter Grinding Wheels

AZ – Premium Blue Aluminum Oxide Grain • Engineered for grinding high speed steels over 55C and general purpose tool steels. • Exceptionally fast and cool cutting characteristics suitable for grinding heat sensitive, alloy steels and mold steels. • Free cutting design pulls the heat away from the part. • Friable grain for cooler grinding. Requires minimal dressing and holds its form well. • Excellent value in most 32A applications. (One letter grade harder is suggested.) TYPE 1

6 x 1/2 x 11/4

4456 RPM

7____________ x 3/4 x 11/4

TYPE 5

3760 RPM

R/1 - 3 x 1/4

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34301

AZ60-K8-V32A

10

20

34335 34336 34337 34338 34341

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-J8-V32A

10 10 10 10 10

20 20 20 20 20

TYPE 1

7 x 1/4 x 11/4

3760 RPM

UPC#

SPEC.

CARTON

UNIT

34303 34308 34309 34310 34312 34313 34314 34315 34317

AZ46-I8-V32A AZ60-I8-V32A AZ60-J8-V32A AZ60-K8-V32A AZ80-J8-V32A AZ80-K8-V32A AZ80-L8-V32A AZ100-K8-V32A AZ150-K8-V32A

10 10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20 20

TYPE 1

7 x 1/2 x 11/4

7____________ x 1 x 1 /4 R/1 - 3 x 1/2

TYPE 5

1

UPC#

SPEC.

CARTON

UNIT

34342 34343 34344 34345 34348 34349

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-J8-V32A AZ60-K8-V32A

10 10 10 10 10 10

20 20 20 20 20 20

3760 RPM

UPC#

SPEC.

CARTON

UNIT

34318 34319 34320 34321 34323 34324 34325 34326 34327 34328 34329 34330 34331 34332 34333

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-H8-V32A AZ60-I8-V32A AZ60-J8-V32A AZ60-K8-V32A AZ60-L8-V32A AZ80-H8-V32A AZ80-K8-V32A AZ100-K8-V32A AZ120-K8-V32A AZ150-K8-V32A AZ46-H12-V32A

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

3760 RPM

TYPE 1

8 x 1/2 x 11/4

3600 RPM

UPC#

SPEC.

CARTON

UNIT

34350 34351 34352 34353 34354 34355 34356 34357 34358

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-H8-V32A AZ60-I8-V32A AZ60-J8-V32A AZ60-K8-V32A AZ80-K8-V32A

10 10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20 20

8____________ x /4 x 1 /4 R/1 - 3 x 1/4 3

TYPE 5

1

3600 RPM

UPC#

SPEC.

CARTON

UNIT

34359 34360 34364

AZ46-H8-V32A AZ46-J8-V32A AZ60-J8-V32A

10 10 10

20 20 20

All Items – Same Day Shipping


AZ: Premium Blue Aluminum Oxide Grain TYPE 5

1

3600 RPM

12 x 1 /2 x 5 ____________ R/1 - 71/2 x 1/2

TYPE 5

1

2228 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34366 34367 34369

AZ46-H8-V32A AZ46-J8-V32A AZ60-J8-V32A

10 10 10

20 20 20

34427 34428 34429 34430 34432 34433

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-I8-V32A AZ60-J8-V32A

2 2 2 2 2 2

4 4 4 4 4 4

TYPE 1

10 x 3/4 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34380 34383

AZ46-I8-V32A AZ60-H8-V32A

5 5

10 10

TYPE 1

10 x 1 x 2

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34387

AZ46-I8-V32A

5

10

TYPE 1

10 x 1 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34389 34390 34391 34392 34394 34395 34396

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-I8-V32A AZ60-J8-V32A AZ60-K8-V32A

5 5 5 5 5 5 5

10 10 10 10 10 10 10

TYPE 1

12 x 3/4 x 3

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34397

AZ46-H8-V32A

4

8

12 x 3/4 x 5

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34409

AZ60-J8-V32A

4

8

TYPE 1

12 x 1 x 3

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34411 34412 34413 34414 34416 34418

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-I8-V32A AZ60-K8-V32A

2 2 2 2 2 2

4 4 4 4 4 4

TYPE 1

12 x 1 x 5

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34419 34421 34422 34425 34426

AZ46-H8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-J8-V32A AZ60-K8-V32A

2 2 2 2 2

4 4 4 4 4

TYPE 7

2228 RPM

R/2 - 61/2 x 1/2 UPC#

SPEC.

CARTON

UNIT

34434 34435

AZ46-I8-V32A AZ60-J8-V32A

1 1

3 3

12 x2x5 ____________ R/2 - 71/2 x 1/2

TYPE 7

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34436 34437 34438 34440 34443

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ60-H8-V32A AZ60-K8-V32A

1 1 1 1 1

3 3 3 3 3

TYPE 1

14 x 1 x 3

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34445

AZ46-I8-V32A

2

4

TYPE 1

14 x 1 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34447 34448 34449 34450 34452 34453 34454

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-I8-V32A AZ60-J8-V32A AZ60-K8-V32A

2 2 2 2 2 2 2

4 4 4 4 4 4 4

TYPE 1

14 x 11/2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34456 34457 34458 34459 34460 34462

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-H8-V32A AZ60-J8-V32A

2 2 2 2 2 2

4 4 4 4 4 4

14 x 11/2 x 5 ____________

TYPE 5

1910 RPM

R/1 - 8 x 1/2 UPC#

SPEC.

CARTON

UNIT

34464 34465 34466 34467 34469 34470 34471

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-I8-V32A AZ60-J8-V32A AZ60-K8-V32A

2 2 2 2 2 2 2

4 4 4 4 4 4 4

All Items – Same Day Shipping

SURFACE GRINDING WHEELS

TYPE 1

12 x2x3 ____________

AZ – Premium Blue Aluminum Oxide Grain

8 x 1 x 1 /4 ___________ R/1 - 3 x 1/2

19


SURFACE GRINDING WHEELS

AZ – Premium Blue Aluminum Oxide Grain

AZ: Premium Blue Aluminum Oxide Grain TYPE 1

14 x 2 x 5

14 x2x5 __________ R/2 - 8 x 3/8

TYPE 7

1910 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34472 34473 34474

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A

1 1 1

2 2 2

34488 34489 34490

AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A

1 1 1

2 2 2

14 x2x5 __________ R/1 - 8 x 1

TYPE 5

1910 RPM

TYPE 1

16 x 11/2 x 5

1671 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34480 34481 34482 34483 34486 34487

AZ46-H8-V32A AZ46-I8-V32A AZ46-J8-V32A AZ46-K8-V32A AZ60-J8-V32A AZ60-K8-V32A

1 1 1 1 1 1

2 2 2 2 2 2

34491 34500 34493

AZ46-H8-V32A AZ60-H8-V32A AZ60-J8-V32A

1 1 1

2 2 2

TYPE 1

16 x 2 x 5

1671 RPM

UPC#

SPEC.

CARTON

UNIT

34495 34496 34497

AZ46-I8-V32A AZ46-J8-V32A AZ60-K8-V32A

1 1 1

2 2 2

• Other sizes/grits available as special make wheels.

CLOSEOUTS* TYPE 1

7 x 1/4 x 11/4

3760 RPM

TYPE 1

12 x 3/4 x 5

2228 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34307

AZ60-H8-V32A

10

20

34409

AZ60-J8-V32A

2

4

TYPE 1

7 x 1/2 x 11/4

3760 RPM

12 x /4 x 5 ____________ R/1 - 71/2 x 1/2

TYPE 5

3

2228 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34322

AZ46-L8-V32A

10

20

34404 34405 34407

AZ46-H8-V32A AZ46-I8-V32A AZ60-H8-V32A

4 4 4

8 8 8

7 x /4 x 1 /4 ____________ R/1 - 3 x 1/4 3

TYPE 5

1

3760 RPM

UPC#

SPEC.

CARTON

UNIT

34339

AZ60-H8-V32A

10

20

8 x 1 x 1 /4 ___________ R/1 - 3 x 1/2

TYPE 5

1

3600 RPM

UPC#

SPEC.

CARTON

UNIT

34368

AZ60-H8-V32A

10

20

TYPE 1

10 x 1/2 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34375 34376

AZ60-H8-V32A AZ60-I8-V32A

5 5

10 10

TYPE 1

10 x 3/4 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34381 34382 34386

AZ46-J8-V32A AZ46-K8-V32A AZ60-K8-V32A

5 5 5

10 10 10

12 x2x5 ____________

TYPE 7

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34397 34402

AZ46-H8-V32A AZ60-J8-V32A

4 4

8 8

2228 RPM

R/2 - 7 / x / 1 2

1 2

UPC#

SPEC.

CARTON

UNIT

34444

AZ80-K8-V32A

1

3

TYPE 1

14 x 1 x 3

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34446

AZ46-J8-V32A

2

4

TYPE 1

14 x 11/2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34461

AZ60-I8-V32A

2

4

14 x2x5 __________ R/1 - 8 x 1

TYPE 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34484

AZ60-H8-V32A

1

2

TYPE 1

16 x 11/2 x 5

TYPE 1

12 x 3/4 x 3

20

1910 RPM

1671 RPM

UPC#

SPEC.

CARTON

UNIT

34492

AZ46-J8-V32A

1

2

*Available while supplies last.

All Items – Same Day Shipping


Ruby Surface grinding wheels 7"-14" Diameter Grinding Wheels

TYPE 1

7 x 1/4 x 11/4

3760 RPM

TYPE 1

10 x 1 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

59025

RA60-J-V

10

20

59012

RA46-J/K-V

5

10

TYPE 1

7 x 1/2 x 11/4

3760 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

34633 34634 34635 59000

RA46-H-V RA46-J/K-V RA60-J/K-V RA80-K-V

10 10 10 10

20 20 20 20

59013 59014

7 x /4 x 1 /4 ____________ R/1 - 3 x 1/4 3

TYPE 5

1

3760 RPM

SPEC.

CARTON

UNIT

59001 59002

RA46-J-V RA60-J-V

10 10

20 20

7 x 1 x 1 /4 ___________ R/1 - 3 x 1/2

TYPE 5

1

3760 RPM

UNIT

4 4

12 x 11/2 x 5 ____________ UPC#

SPEC.

CARTON

UNIT

RA46-H8-V RA46-J/K-V

2 2

4 4

12 x2x5 ____________ R/2 - 71/2 x 1/2

10 10 10 10

20 20 20 20

8 x 3/4 x 11/4 ____________

TYPE 5

3600 RPM

R/1 - 3 x /

1 4

2228 RPM

1 2

20 20

RA46-H-V RA46-J/K-V RA60-K-V RA80-K-V

TYPE 5

R/1 - 7 / x / 1 2

10 10

59005 59006 59007 59008

2228 RPM 2 2

RA46-J-V RA60-J-V

UNIT

TYPE 1

CARTON

59003 59004

CARTON

4 4

SPEC.

59017 59018

SPEC.

2 2

RA46-K-V RA60-K-V

UNIT

UPC#

RA46-H-V RA46-J/K-V

UPC#

CARTON

3600 RPM

UNIT

59015 59016

SPEC.

TYPE 1

CARTON

12 x 1 x 5

UPC#

8 x 1/2 x 11/4

2228 RPM

SPEC.

TYPE 7

2228 RPM

UPC#

SPEC.

CARTON

UNIT

59019 59020

RA46-H8-V RA46-J/K-V

1 1

3 3

TYPE 1

14 x 1 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

59021

RA46-I/J-V

2

4

TYPE 1

14 x 11/2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

59009

RA46-H-V

10

20

59022

RA46-H-V

2

4

8 x 1 x 11/4 ___________

TYPE 5

3600 RPM

R/1 - 3 x 1/2

14 x 1 /2 x 5 ____________ R/1 - 8 x 1/2

TYPE 5

1

1910 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

59010 59011

RA46-J/K-V RA60-J/K-V

10 10

20 20

59023

RA46-I/J-V

2

4

14 x2x5 __________ R/1 - 8 x 1

SURFACE GRINDING WHEELS

UPC#

TYPE 1

12 x 1 x 3

Ruby Aluminum Oxide Grain

RA – Ruby Aluminum Oxide Grain • Ideal for rough grinding of all tool steels including steel with high levels of chromium. • Ruby wheels have fast removal rate, and reduced cycle time for increased productivity. • A tough, sharp, yet friable abrasive with high material removal rate and strong form holding capabilities. • Good corner form holding characteristics. • Dressing intervals are 2-3 times less that of White wheels. • Grain is tougher than White, AZ or Pink grain wheels.

TYPE 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

59024

RA46-H-V

1

2

• Other sizes/grits available as special make wheels.

All Items – Same Day Shipping

21


Pink Surface grinding wheels

SURFACE GRINDING WHEELS

Pink Aluminum Oxide Grain

7"-14" Diameter Grinding Wheels

PA – Pink Aluminum Oxide Grain • CGW PA is Aluminum Oxide containing 0.3% of Chromium Oxide which gives the grain a pink color. The addition of Cr2O3 makes this grain slightly tougher and less friable than White Aluminum Oxide (WA), but still attains the free cutting properties attributed to CGW wheels. • PA wheels are best suited for high alloy steel applications. Being tougher than the white grain, pink grain is ideal for sharpening HSS cutters, reamers, chisels, end mills and cutting saws – on these applications the white grain tends to wear quicker. In addition, chromium in the grain alters the way the abrasive splinters and renews itself, which provides a fuller self-sharpening effect. On these and other tool room applications PA wheels give a cooler grind which helps avoid burning the edges of tools while grinding. • Ideal for grinding medium and hard to grind high speed steels and alloy steels. • Sharp grain for fast, cool cutting action at light to moderate feed rates. • Engineered for enhanced self sharpening effect. • Good general purpose wheel.

Pink toolroom wheels 4/3 x 11/2 x 11/4

6685 RPM

UPC#

SPEC.

CARTON

UNIT

58054 58055 58056 58057

PA46-K-V PA60-I-V PA60-K-V PA80-K-V

10 10 10 10

20 20 20 20

5/33/4 x 13/4 x 11/4

22

TYPE 11

TYPE 11

5348 RPM

UPC#

SPEC.

CARTON

UNIT

58058 58059 58060

PA46-I-V PA46-K-V PA60-K-V

10 10 10

20 20 20

All Items – Same Day Shipping


PA: PInk Aluminum Oxide Grain TYPE 1

7 x 1/4 x 11/4

3760 RPM

TYPE 1

10 x 1 x 3

2674 RPM

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

PA46-I8-V PA60-J8-V PA80-K8-V PA100-K8-V

10 10 10 10

20 20 20 20

58030 58031 58032

PA46-H8-V PA46-J8-V PA60-J8-V

5 5 5

10 10 10

TYPE 1

7 x 1/2 x 11/4

3760 RPM

UPC#

SPEC.

CARTON

UNIT

58004 58005 58006 58007 58008 58009 58010 58011 58012

PA46-H8-V PA46-I8-V PA46-J8-V PA46-K8-V PA60-H8-V PA60-I8-V PA60-J8-V PA60-K8-V PA80-K8-V

10 10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20 20

7 x /4 x 1 /4 ____________ R/1 - 3 x 1/4 3

TYPE 5

1

3760 RPM

UPC#

SPEC.

CARTON

UNIT

58013 58014 58015

PA46-I8-V PA46-J8-V PA60-J8-V

10 10 10

20 20 20

7 x 1 x 1 /4 ___________ R/1 - 3 x 1/2

TYPE 5

1

3760 RPM

SPEC.

CARTON

UNIT

58016 58017 58018

PA46-H8-V PA46-J8-V PA60-J8-V

10 10 10

20 20 20

TYPE 1

8 x 1/2 x 11/4

3600 RPM

UPC#

SPEC.

CARTON

UNIT

58019 58020 58021 58022 58023 58024 58025

PA46-H8-V PA46-I8-V PA46-J8-V PA46-K8-V PA60-J8-V PA60-K8-V PA80-K8-V

10 10 10 10 10 10 10

20 20 20 20 20 20 20

8 x /4 x 1 /4 ____________ R/1 - 3 x 1/4 3

TYPE 5

1

3600 RPM

UPC#

SPEC.

CARTON

UNIT

58026

PA46-H8-V

10

20

8 x 1 x 1 /4 ___________

TYPE 5

1

3600 RPM

R/1 - 3 x /

1 2

UPC#

SPEC.

CARTON

UNIT

58027 58028 58029

PA46-H8-V PA46-J8-V PA60-J8-V

10 10 10

20 20 20

2228 RPM

UPC#

SPEC.

CARTON

UNIT

58033 58034

PA46-H8-V PA46-J8-V

2 2

4 4

TYPE 1

12 x 1 x 5

2228 RPM

UPC#

SPEC.

CARTON

UNIT

58035 58036

PA46-K8-V PA60-K8-V

2 2

4 4

12 x 11/2 x 5 ____________

TYPE 5

2228 RPM

R/1 - 71/2 x 1/2 UPC#

SPEC.

CARTON

UNIT

58037 58038

PA46-H8-V PA46-J8-V

2 2

4 4

12 x2x5 ____________ R/2 - 71/2 x 1/2

TYPE 7

2228 RPM

UPC#

SPEC.

CARTON

UNIT

58039 58040

PA46-H8-V PA46-I8-V

1 1

2 2

TYPE 1

14 x 1 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

58048 58049 58050

PA46-H8-V PA46-I8-V PA60-K8-V

2 2 2

4 4 4

TYPE 1

14 x 11/2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

58041 58042

PA46-H8-V PA46-J8-V

2 2

4 4

14 x2x5 __________ R/1 - 8 x 1

TYPE 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

58043 58044 58045

PA46-H8-V PA46-I8-V PA60-K8-V

1 1 1

2 2 2

14 x2x5 ____________

TYPE 7

SURFACE GRINDING WHEELS

UPC#

TYPE 1

12 x 1 x 3

Pink Aluminum Oxide Grain

UPC#

58000 58001 58002 58003

1910 RPM

R/2 - 8 x /

3 8

UPC#

SPEC.

CARTON

UNIT

58046 58047

PA46-I8-V PA46-J8-V

1 1

2 2

• Other sizes/grits available as special make wheels.

All Items – Same Day Shipping

23


WHITE aluminum Surface grinding wheels

White Aluminum Oxide Grain

7"-14" Diameter Grinding Wheels

WA – White Aluminum Oxide Grain • Most friable abrasive grain for light grinding provides coolness of cut and fast cutting action on all steels. • Ideal for grinding hard and very heat-sensitive steels, as well as easy and medium to grind high speed steels. • WA is the economical choice grain used for surface grinding.

TYPE 1

7 x 1/4 x 11/4

1

TYPE 5

3760 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

WA46-I-V WA60-I-V WA60-J-V WA60-K-V WA80-J-V WA80-K-V WA100-K-V WA120-K-V WA150-K-V

10 10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20 20

34647 34648 34649 34650 34652 34653

WA46-H-V WA46-I-V WA46-J-V WA46-K-V WA60-I-V WA60-J-V

10 10 10 10 10 10

20 20 20 20 20 20

TYPE 1

3760 RPM

UPC#

SPEC.

CARTON

UNIT

34614 34615 34616 34617 34618 34619 34620 34621 34622 34623 34624 34625 34626

WA46-G-V WA46-H-V WA46-I-V WA46-J-V WA46-K-V WA60-H-V WA60-I-V WA60-J-V WA60-K-V WA80-K-V WA100-K-V WA120-K-V WA150-K-V

10 10 10 10 10 10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20 20 20 20 20 20

7 x 3/4 x 11/4 ____________

TYPE 5

3760 RPM

R/1 - 3 x /

1 4

24

7____________ x 1 x 1 /4 R/1 - 3 x 1/2

34600 34603 34604 34605 34606 34607 34608 34609 34610 7 x 1/2 x 11/4

SURFACE GRINDING WHEELS

3760 RPM

UPC#

SPEC.

CARTON

UNIT

34636 34638 34640 34642

WA46-H-V WA46-J-V WA60-H-V WA60-J-V

10 10 10 10

20 20 20 20

TYPE 1

8 x 1/4 x 11/4

3600 RPM

UPC#

SPEC.

CARTON

UNIT

34663 34664

WA60-K-V WA80-J-V

10 10

20 20

TYPE 1

8 x 1/2 x 11/4

3600 RPM

UPC#

SPEC.

CARTON

UNIT

34671 34672 34673 34674 34676 34677 34678 34679

WA46-H-V WA46-I-V WA46-J-V WA46-K-V WA60-I-V WA60-J-V WA60-K-V WA80-K-V

10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20

8____________ x /4 x 1 /4 R/1 - 3 x 1/4 3

TYPE 5

1

3600 RPM

UPC#

SPEC.

CARTON

UNIT

34683 34685 34688 34689 34690

WA46-H-V WA46-J-V WA60-I-V WA60-J-V WA60-K-V

10 10 10 10 10

20 20 20 20 20

All Items – Same Day Shipping


WA: White Aluminum Oxide Grain

8 x 1 x 1 /4 ___________ R/1 - 3 x 1/2

12 x 1 /2 x 5 ____________ R/1 - 71/2 x 1/2

1

TYPE 5

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34695 34696 34697 34698 34700 34701 34702

WA46-H-V WA46-I-V WA46-J-V WA46-K-V WA60-I-V WA60-J-V WA60-K-V

10 10 10 10 10 10 10

20 20 20 20 20 20 20

34769 34770 34771 34772 34774 34775 34776

WA46-H-V WA46-I-V WA46-J-V WA46-K-V WA60-I-V WA60-J-V WA60-K-V

2 2 2 2 2 2 2

4 4 4 4 4 4 4

3600 RPM

2674 RPM

12 x2x5 ____________

2228 RPM

TYPE 7

2228 RPM

R/2 - 71/2 x 1/2

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34712

WA60-J-V

5

10

34777 34778 34779 34781

WA46-H-V WA46-I-V WA46-J-V WA60-H-V

1 1 1 1

3 3 3 3

TYPE 1

10 x 3/4 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34719

WA60-I-V

5

10

TYPE 1

10 x 1 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34723 34724 34725 34729

WA46-H-V WA46-I-V WA46-J-V WA60-J-V

5 5 5 5

10 10 10 10

TYPE 1

12 x 3/4 x 3

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34735

WA46-I-V

4

8 2228 RPM

UPC#

SPEC.

CARTON

UNIT

34742 34743 34744 34749

WA46-H-V WA46-I-V WA46-J-V WA60-J-V

2 2 2 2

4 4 4 4

TYPE 1

12 x 1 x 5

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34752 34755 34759 34760

WA46-H-V WA46-J-V WA60-J-V WA60-K-V

2 2 2 2

4 4 4 4

12 x 1 /2 x 3 ____________ R/1 - 71/2 x 1/2

TYPE 5

1

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34761 34762 34763 34766

WA46-H-V WA46-I-V WA46-J-V WA60-I-V

2 2 2 2

4 4 4 4

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34786 34790 34792

WA46-I-V WA60-I-V WA60-K-V

2 2 2

4 4 4

14 x 1 /2 x 5 ____________ R/1 - 8 x 1/2

TYPE 5

1

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34793 34794 34795 34797 34798

WA46-H-V WA46-I-V WA46-J-V WA60-H-V WA60-I-V

2 2 2 2 2

4 4 4 4 4

TYPE 1

14 x 11/2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34801 34802 34803

WA46-H-V WA46-I-V WA46-J-V

2 2 2

4 4 4

TYPE 1

14 x 2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34808 34809

WA46-I-V WA60-J-V

1 1

2 2

14 x2x5 __________ R/1 - 8 x 1

TYPE 5

SURFACE GRINDING WHEELS

TYPE 1

12 x 1 x 3

TYPE 1

14 x 1 x 5

White Aluminum Oxide Grain

TYPE 1

10 x 1/2 x 3

TYPE 5

1

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34811 34812 34813 34814 34816 34817

WA46-H-V WA46-I-V WA46-J-V WA46-K-V WA60-I-V WA60-J-V

1 1 1 1 1 1

2 2 2 2 2 2

• Other sizes/grits available as special make wheels.

All Items – Same Day Shipping

25


WA: White Aluminum Oxide Grain

CLOSEOUTS* TYPE 1

White Aluminum Oxide Grain

7 x 1/2 x 11/4

SURFACE GRINDING WHEELS

TYPE 1

12 x 3/4 x 3

2228 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34630 34632

WA46-F12 WA60-H12

10 10

20 20

34737 34738 34739 34740

WA46-K8 WA60-H8 WA60-I8 WA60-J8

4 4 4 4

8 8 8 8

7 x /4 x 1 /4 ____________ R/1 - 3 x 1/4 3

TYPE 5

1

3760 RPM

UPC#

SPEC.

CARTON

UNIT

34643

WA60-K-V

10

20

TYPE 1

8 x 1/4 x 11/4

3600 RPM

UPC#

SPEC.

CARTON

UNIT

34659 34660

WA46-J8 WA46-K8

10 10

20 20

TYPE 1

10 x 1/2 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34706 34709 34710 34713

WA46-H-V WA46-K8 WA60-H8 WA60-K8

5 5 5 5

10 10 10 10

TYPE 1

10 x 3/4 x 3

26

3760 RPM

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34716 34717 34718

WA46-J8 WA46-K8 WA60-H8

5 5 5

10 10 10

TYPE 1

10 x 1 x 3

2674 RPM

UPC#

SPEC.

CARTON

UNIT

34726

WA46-K8

5

10

TYPE 1

12 x 1 x 3

2228 RPM

UPC#

SPEC.

CARTON

UNIT

34757

WA60-H8

2

4

12 x 11/2 x 3 ____________

TYPE 5

2228 RPM

R/1 - 7 / x / 1 2

1 2

UPC#

SPEC.

CARTON

UNIT

34765

WA60-H8

2

4

12 x2x5 ____________

TYPE 7

2228 RPM

R/2 - 71/2 x 1/2 UPC#

SPEC.

CARTON

UNIT

34783

WA60-J-V

1

3

TYPE 1

14 x 11/2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34805 34806

WA60-J8 WA60-K8

10 10

20 20

TYPE 1

14 x 2 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

34810

WA60-K8

1

2

*Available while supplies last.

All Items – Same Day Shipping


Green Silicon Carbide Surface grinding wheels 7"-8" Diameter Grinding Wheels

TYPE 1

7 x 1/4 x 11/4

3760 RPM

TYPE 1

8 x 1/4 x 11/4

3600 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34611 34612 34613

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

34669

GC80-I-V

10

20

TYPE 1

7 x 1/2 x 11/4

3760 RPM

UPC#

SPEC.

CARTON

UNIT

34627 34628 34629

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

7 x /4 x 1 /4 ____________ R/1 - 3 x 1/4 3

TYPE 5

1

3760 RPM

SPEC.

CARTON

UNIT

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

7 x 1 x 11/4 ___________

TYPE 5

3760 RPM

R/1 - 3 x 1/2 UPC#

SPEC.

CARTON

UNIT

34655 34656 34657

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

SPEC.

CARTON

UNIT

34680 34681 34682

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

8____________ x /4 x 1 /4 R/1 - 3 x 1/4 3

TYPE 5

1

8 x /4 x 1 /4 ____________

TYPE 5

1

UPC#

SPEC.

CARTON

UNIT

GC60-I-V

10

20

8___________ x 1 x 11/4

TYPE 5

UPC#

SPEC.

CARTON

UNIT

34693

GC80-I8

10

20

3600 RPM

R/1 - 3 x /

1 2

UPC#

SPEC.

CARTON

UNIT

34703 34705

GC60-I-V GC100-I-V

10 10

20 20

3600 RPM

R/1 - 3 x 1/4

3600 RPM

34692

CLOSEOUTS* 3

3600 RPM

UPC#

SURFACE GRINDING WHEELS

UPC#

34644 34645 34646

TYPE 1

8 x 1/2 x 11/4

Green silicon carbide Grain

GC – Green Silicon Carbide Grain • Quickly grinds non-ferrous metals and sharpens tungsten carbide tools. • Used on titanium and cemented carbide.

*Available while supplies last.

All Items – Same Day Shipping

27



Mattison-Thompson Surface Grinding Wheels & Segments

29


Mattison-thompson Surface Grinding Wheels and Segments

Mattison-Thompson Type 18"-20" Diameter Surface Grinding Wheels

For horizontal spindle, rotary and reciprocating tables use wheels T-1, T-5, and T-7. • 91A* - A mixture of WA and A abrasives. Recommended for general purpose work and light stock removal. • 83A* - The high friability of this grain allows for fast, cool cutting of all steels. Induced porosity wheels are ideal for steels Rockwell C 55 and over. • PA - Excellent for grinding pre-hardened carbon steels. • AZ - Recommended for hard steels and stainless steels. • 72C - Use for grinding non-ferrous materials, plastics, cast and gray iron. • AS3 - Ceramic Aluminum Oxide - Recommended for tool steels, sprayed metal coatings and high-temp alloys. *See grindability chart for specific tool application, page 33.

Master Selection Stock Sheet

91A: Semi-Friable Mixed Premium Aluminum Oxide 83A: White Aluminum Oxide 72C: Black Silicon Carbide

OPEN STRUCTURE 91A 461

83A 36J

83A 46H

83A 46I

83A 60J

83A 36J/K

83A 46B

83A 46D

83A 46G+

83A 54F

AZ 46C

AZ 46I

PA 36/46I/J

AS3 46H

72C 46I

PG #

18 x 2 x 8 __________

31

20 x 1 x 8 20 x 1 x 10 20 x 11/2 x 8 __________

– –

– •

• –

– –

• –

– –

– –

– –

– –

– –

– –

– –

– –

– –

– –

31 31

31

20 x 11/2 x 10 20 x 2 x 8 __________

31

31

20 x 2 x 10 20 x 3 x 8 __________

31

31

31

31

31

31

20 x 6 x 12 __________

32

20 x 8 x 12 __________

32

SIZE

R/2 - 111/2 x 1/2

R/1 - 111/2 x 1/2

R/2 - 111/2 x 1/2

R/2 - 111/2 x 1/2

20 x 3 x 10 __________

R/1 - 121/2 x 5/8 O/S - 121/2 x 1

20 x 4 x 8 __________

R/2 - 111/2 x 1/2

20 x 4 x 10 __________

R/1 - 121/2 x 7/8 O/S - 121/2 x 11/4

20 x 6 x 10 __________ R/1 - 121/2 x 1 O/S - 121/2 x 2 R/2 - 141/4 x 1 R/2 - 141/4 x 1

30

PA: Pink Aluminum Oxide AZ: Premium Blue Aluminum Oxide AS3: Advanced Ceramic Grain

All Items – Same Day Shipping


18 x2x8 _____________ R/2 - 111/2 x 1/2

TYPE 7

PA: Pink Aluminum Oxide AZ: Premium Blue Aluminum Oxide AS3: Advanced Ceramic Grain

1460 RPM

UPC#

SPEC.

CARTON

UNIT

34003 34004

91A46-I8-V18 83A46-H-V18

– –

2 2

TYPE 1

20 x 1 x 8

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34006 34007

83A46-H8-V18 83A60-J8-V18

– –

3 3

TYPE 1

20 x 1 x 10

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34009

83A36-J8-V18

3

20 x 1 /2 x 8 ______________ R/1 - 111/2 x 1/2

TYPE 5

1

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34014 34015

83A46-H8-V18 83A60-J8-V18

– –

2 2

TYPE 1

20 x 11/2 x 10

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34018

83A46-H8-V18

2

20 x2x8 _____________ R/2 - 111/2 x 1/2

TYPE 7

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34021 34022 34023

91A46-I8-V18 83A46-H8-V18 83A60-J8-V18

– – –

2 2 2

83A36-J/K-V18P 83A46-G+-V18P

– –

2 2

OPEN STRUCTURE:

34024 34025

TYPE 1

20 x 2 x 10

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34027 34028 34029

83A36-J8-V18 83A46-H8-V18 83A60-J8-V18

– – –

2 2 2

83A46-G+-V18P

2

OPEN STRUCTURE:

34030 20 x3x8 _____________ R/2 - 111/2 x 1/2

TYPE 7

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34032 34033 34048 34034

91A46-I8-V18 83A46-H8-V18 83A60-J8-V18 AZ46-I8-V32A

– – – –

2 2 2 2

83A36-J/K-V18P 83A46-D-V18P 83A46-G+-V18P

– – –

2 2 2

72C46-I8-VX

2

OPEN STRUCTURE:

34035 34036 34037

20 x 3 x 10 _____________ R/1 - 121/2 x 5/8 O/S - 121/2 x 1

TYPE 7

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34039 34040 34041 34043

91A46-I8-V18 83A46-H8-V18 83A60-J8-V18 AZ46-I8-V32A

– – – –

2 2 2 2

83A36-J/K-V18P 83A46-D-V18P 83A46-G+-V18P PA36/46-I/J-V18P AS3-46H-VCER

– – – – –

2 2 2 2 2

72C46-I8-VX

2

OPEN STRUCTURE:

34044 34045 34046 34047 34245 SILICON CARBIDE:

34049 20 x4x8 _____________

TYPE 7

1241 RPM

R/2 - 111/2 x 1/2 UPC#

SPEC.

CARTON

UNIT

34051

83A46-H8-V18

1

83A36-J/K-V18P 83A46-G+-V18P

– –

1 1

OPEN STRUCTURE:

34052 34053 20 x 4 x 10 _____________ R/1 - 121/2 x 7/8 O/S - 121/2 x 11/4

TYPE 7

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34055 34057

91A46-I8-V18 83A46-H8-V18

– –

1 1

83A36-J/K-V18P 83A46-D-V18P 83A46-G+-V18P

– – –

1 1 1

Mattison-thompson Surface Grinding Wheels and Segments

91A: Semi-Friable Mixed Premium Aluminum Oxide 83A: White Aluminum Oxide 72C: Black Silicon Carbide

OPEN STRUCTURE:

34059 34060 34061 20 x 6 x 10 ____________ R/1 - 121/2 x 1 O/S - 121/2 x 2

TYPE 7

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34063 34064 34065 34067

91A46-I8-V18 83A46-H8-V18 83A46-I8-V18 AS3-46H-VCER

– – – –

1 1 1 1

83A36-J/K-V18P 83A46-B-V18P 83A46-D-V18P 83A46-G+-V18P 83A54-F-V18P AZ46-C12-V32AP PA36/46-I/J-V18P

– – – – – – –

1 1 1 1 1 1 1

72C46-I8-VX

1

OPEN STRUCTURE:

34069 34070 34071 34072 34073 34074 34075 SILICON CARBIDE:

34076

SILICON CARBIDE:

34038

All Items – Same Day Shipping

31


Mattison-thompson Surface Grinding Wheels and Segments 32

91A: Semi-Friable Mixed Premium Aluminum Oxide 83A: White Aluminum Oxide 72C: Black Silicon Carbide

20 x 6 x 12 ____________ R/2 - 141/4 x 1

TYPE 7

PA: Pink Aluminum Oxide AZ: Premium Blue Aluminum Oxide AS3: Advanced Ceramic Grain

1241 RPM

20 x 8 x 12 ____________ R/2 - 141/4 x 1

TYPE 7

1241 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34077 34078

91A46-I8-V18 83A46-H8-V18

– –

1 1

34084

83A46-H8-V18

1

83A36-J/K-V18P 83A46-G+-V18P 83A54-F-V18P

– – –

1 1 1

OPEN STRUCTURE:

34079 34080 34081

CLOSEOUTS* 18 x2x8 _____________ R/2 - 111/2 x 1/2

TYPE 7

1460 RPM

TYPE 1

20 x 11/2 x 10

1241 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

34005

83A46-G+-V18P

2

34019

83A60-J8-V18

2

20 x 1 /2 x 8 ______________ R/1 - 111/2 x 1/2

*Available while supplies last.

TYPE 5

1

1241 RPM

UPC#

SPEC.

CARTON

UNIT

34016

83A46-G+-V18P

2

Surface Grinding RECOMMENDATIONS

The term surface grinding is used to describe the grinding of surfaces where the wheel moves over the workpiece in a flat plane, or vice versa. General operating speeds are 4,000 to 6,500 RPM. Wheel Type 83A 36 J/K 83A 46 G+ 91A 46 I 83A 46 H 83A 46 D 83A 46 B+ AZ 46 C

Recommendation For rough grinding and maximum stock removal. For standard removal and average surface finish. General purpose wheel used mainly for softer materials. A softer wheel compared to the 91A 46 I. Used on slightly harder materials. More aggressive than the 83A 46 G+. For hard steels and HSS. Good stock removal of very hard materials. Excellent on Stainless Steel. Recommended for Stainless Steels where improved surface finish is required.

All Items – Same Day Shipping


Tool Steel Classifications

1

Grindability

2

3

4

Easy to Grind

Hard to Grind

91A46I8 - 83A46H8 - 83A46G+V18P - 83A46DV18P - AZ46H8 - 83AB+ Steel Type

Classification of Grindability

Air-Hardening Medium Alloy Cold Work Tool Steels

A2 A3 A4 A5 A6 A7 A8 A9 A10

1 1 1 1 1 1 1 1 1

Air-Hardening Medium Alloy Cold Work Tool Steels

D1 D2 D3 D4 D5 D6 D7

2 3 2 2 2 2 4

Steel Type

Classification of Grindability

Steel Type

Carbon-Tungsten Tool Steels

F1 F2 F3

2 2 2

H10 H11 H12 H13 H14 H16 H17

1 1 1 1 1 1 1

H41 H42 H43

H20 H21 H22 H23 H24 H25 H26

1 1 1 1 1 1 1

2 2 2

Low-Alloy Special Purpose Tool Steels

Tungsten Hot Work Tool Steels

Steel Type

Molybdenum Hot Work Tool Steels

Chromium Hot Work Tool Steels

Classification of Grindability

L1 L2 L3 L4 L5 L6 L7

1 1 1 1 1 1 1

Molybdenum High-Speed Tool Steels

M1 M2 M3 M4

2 2 3 4

Classification of Grindability

Steel Type

Molybdenum High-Speed Tool Steels (cont.)

M6 M7 M8 M10 M15 M20 M25 M30 M33 M34 M35 M40 M41 M42 M43 M44 M45 M50 M52

3 3 2 2 4 2 2 2 3 3 3 3 3 3 3 3 3 3 3

Classification of Grindability

Steel Type

Oil-Hardened Cold Work Tool Steels

O1 O2 O6 O7

1 1 1 1 Mold Steels

P1 P2 P3 P4 P5 P6 P20 P21

1 1 1 1 1 1 1 1

Shock-Resisting Tool Steels

S1 S2 S3 S4 S5 S6 S7

1 1 1 1 1 1 1

Classification of Grindability

Tungsten High-Speed Tool Steels

T1 T2 T3 T4 T5 T6 T7 T8 T9 T15 T20

2 2 3 2 3 3 2 2 4 4 4

Water-Hardening Tool Steels

W1 W2 W3 W4 W5 W7

1 1 1 1 1 1

Segments

Cortland, Norton, and Blanchard Shapes

Used on vertical spindle rotary tables. • 29A/DA - Semi-friable mixed premium aluminum oxide - general purpose work. • 83A/WA - Friable white aluminum oxide - fast stock removal. • AZP - Premium blue aluminum oxide with bond designed for HSS for cool cutting.

Mattison-thompson Surface Grinding Wheels and Segments

Mattison-Thompson Surface Grinding WHeels

Cortland Segment Shape CD B

SEGMENTS

A

UPC#

Norton Segment Shape NO B

SPEC.

CARTON

UNIT

5 5 5 5

10 10 10 10

10 10

20 20

10 10

20 20

6

12

111/4 X 21/4 X 6 - Cortland Shape

34094 34096 34097 34099

CD22-6 83A30-E12-V CD22-6 83A30-G12-V CD22-6 83A30-H12-V CD22-6 83A46-F12-V

71/4 X 17/8 X 7 - Cortland Shape

34101 34103 A

Blanchard Shape Segments

CD30 83A30-D12-V2 CD30 83A30-G12-V2

5 X 1/2 X 6 - NORTON Shape

34107 34108

NO22 AZP30-F12-VPB NO22 AZP30-H12-VPB

71/16 X 13/4 X 6 - Blanchard Shape

34113

BL18 83A30-J12-V

A

All Items – Same Day Shipping

33



Centerless, Cylindrical & Feed Regulating Wheels

35


Centerless, cylindrical & Feed regulating wheels 36

Centerless, Cylindrical & Feed Regulating Wheels Each Cylindrical, Centerless CGW wheel is manufactured with varying hardness to assure consistent grindability throughout. This feature compensates for the diameter and speed changes as the wheel is used. • 94A - Semi-friable Aluminum Oxide - very durable self-dressing grain. • 72C - Silicon Carbide - for non-ferrous metals. All CGW Feed Regulating wheels are manufactured with an isostatic process assuring perfect gripping and elimination of hard spots and voids, a common problem with rubberized wheels. • A80-R2-RX - Natural Rubber • A80-R2-CDR - Calendered Rubber Starting Recommendations Material

Recommendation

Material

Recommendation

Aluminum Brass and Bronze

72C60L 72C60L

Stainless Steel Hardened Steel 55rc

94A60K 94A60L

94A 54K

94A 60J

94A 60K

94A 60L

94A 60M

94A 80J

94A 80L

94A 80M

94A 80-O

94A 80P

94A 80N/120S

72C 60L

PG #

12 x 4 x 5 14 x 1 x 5 14 x 11/4 x 5 14 x 11/2 x 5 __________

– • •

– – –

– – –

• • •

– – –

– – –

– – –

– • –

– – –

– – –

– – –

– – –

38 38 38

38

14 x 2 x 5 ________ R/1 - 8 x 1

38

16 x 1 x 5 16 x 1 x 8 16 x 11/2 x 5 16 x 11/2 x 8 16 x 2 x 5 16 x 2 x 8 16 x 4 x 10 20 x 1 x 12 20 x 2 x 12 20 x 21/2 x 12 20 x 3 x 12 20 x 4 x 12 20 x 6 x 12 20 x 8 x 12 20 x 10 x 12 24 x 11/2 x 12 24 x 2 x 12 24 x 21/2 x 12 24 x 3 x 12 24 x 4 x 12 24 x 6 x 12 24 x 8 x 12 24 x 10 x 12 24 x 20 x 12

– • – • – • – – – – – – – • – – – – – – – – – –

– – – – – – – – – – – – • – – – – – – – – – – –

– – – – – – – • • – • • • • – • • – • • • • • •

• • • • • • • • • – • • • • • – • – – • • • • •

– – – – – – – • • – – • • • – – • – – – • • • •

– – – – – – – – – – – – • • – – – – – – • • – –

– – – – – – • – – – – – • • – – – – – – – • – –

• • • • • – – – • – – • • • – – – – – • • – – –

– – – – – – – • • – – – • • – – • – – • • • – –

– – – – – – – • • – – • • – – – – – – – – – – –

– – – – – – – – • • • • • • – – • • • • • – – –

– – – – – – – – – – – – • • – – – – – – • • – –

38 38 38 38 38 38 38 38 38 38 39 40 40 40 40 40 40 40 41 41 41 41 41 41

SIZE

R/1 - 8 x 1/2

All Items – Same Day Shipping


Different Types of Grinding

Centerless Grinding

The workpiece lies between two wheels; the grinding wheel and the feed regulating wheel. Feed wheel diameter is always proportionally smaller than the grinding wheel it is matched with (see chart below); GRINDING WHEEL

Grinding Wheel Diameter Feed Wheel Diameter 14" 8" 16" 9" 20" 12" 24" 14"

REGULATING WHEEL WORK

Width of grinding wheel and feed wheel must be the same.

Grinding Wheel 20 x 6 x 12

Feed Wheel 12 x 6 x 5

BLADE

WORK REST

Three Basic Types of Centerless Grinding

Grinding wheels for centerless grinding range in size from 12" to 24" in diameter, and up to 34" in thickness. They are made with the same vitrified bonds as those used in cylindrical wheels. Through Feed - Most commonly used centerless grinding where straight cylindrical parts are passed from the entrance on the machine, through, and out the exit side. In-Feed (Plunge) - Used on part with a shape that does not allow axial movement. Frequently, several diameters are ground at once by using a specially formed wheel face, or by mounting two or more wheels on the same spindle. End-Feed - For producing or finishing a taper in the workpiece. The parts are fed in the entrance side of the machine up to a fixed end point.

Centerless, cylindrical & Feed regulating wheels

Cylindrical Grinding - The precision grinding of the outer surface of any round workpiece. The workpiece is held between centers or in chucks. Traverse Grinding - The grinding operation where the work traverses past the wheel. Plunge Grinding - Uses a stationary work table and the wheel "plunges" into the workpiece.

Benefits of Cast Natural Rubber Feed Wheels

This wheel gives the best drive or braking action while resisting spin out of parts. This grade is satisfactory for the majority of applications. For harder grades, see Calendered Wheels. Benefits of Calendered Rubber Feed Wheels

Calendered wheels are best used on thinner feed regulating wheels or when the cast natural rubber wheel deflects under pressure. The calendered wheel is preferred when close tolerances are required or there is excessive wheel wear on the standard feed wheel. Typical Centerless Grinding Machines Cincinnati Model 2

Cincinnati Model 3

Cincinnati Model 3-20 Twingrip

Landis Model 12R

Royal Master Model TG12

Van Norman Model 1C

Van Norman Model 2C

GRINDING WHEEL Shape Diameter Width Range Standard Width Hole Size

T-1 20 3-8 6 12

T-1 24 4-12 8 12

T-1 24 – 20 12

T-1 20 4-8 6 12

T-1 12 – 3 5

T-7 14 ≤4 4 8

T-7 24 4-8 4 12

REGULATING WHEEL Shape Diameter Width Range Standard Width Hole Size

T-7 12 3-8 6 5

T-7 14 4-12 8 5

T-7 12 4-8 6 5

T-1 6 – 3 1

T-7 8 ≤4 4 3

T-7 12 4-8 6 5

T-7 14 – 20 5

/ / / / /

T-7 14 – 20 6

All Items – Same Day Shipping

37


Centerless, cylindrical & Feed regulating wheels

94A: Semi-Friable Aluminum Oxide 72C: Black Silicon Carbide TYPE 1

12 x 4 x 5

2228 RPM

TYPE 1

16 x 2 x 5

1671 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

35200

94A60-L-V18

1

35224 35225

94A60-L5-V18 94A80-M6-V18

1 1

2 2

TYPE 1

14 x 1 x 5

1910 RPM

UPC#

SPEC.

CARTON

UNIT

35201 35202 35203

94A54-K-V18 94A60-L-V18 94A80-M-V18

2 2 2

4 4 4

TYPE 1

14 x 11/4 x 5

1910 RPM

TYPE 1

16 x 2 x 8

1671 RPM

UPC#

SPEC.

CARTON

UNIT

35229 35230

94A54-K5-V18 94A60-L5-V18

1 1

2 2

TYPE 1

16 x 4 x 10

1671 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

35204 35205

94A54-K-V18 94A60-L-V18

2 2

4 4

35232 35233

94A60-L-V18 94A80-L-V18

– –

1 1

14 x 1 /2 x 5 ____________ R/1 - 8 x 1/2

TYPE 5

1

UPC#

35207 35208 35209

SPEC.

14 x2x5 __________ R/1 - 8 x 1

1910 RPM CARTON

94A54-K-V18 94A60-L-V18 94A80-M-V18

2 2 2

TYPE 5

UPC#

SPEC.

CARTON

UNIT

4 4 4

94A60-K-V18 94A60-L-V18 94A60-M-V18 94A80-O-V18 94A80-P-V18

– – – – –

3 3 3 3 3 800 RPM

SPEC.

CARTON

UNIT

35210 35211 35212

94A54-K-V18 94A60-L-V18 94A80-M-V18

1 1 1

2 2 2 1671 RPM

UPC#

SPEC.

CARTON

UNIT

35213 35214

94A60-L-V18 94A80-M-V18

1 1

2 2

TYPE 1

16 x 1 x 8

1671 RPM

UPC#

SPEC.

CARTON

UNIT

35215 35216 35217

94A54-K-V18 94A60-L-V18 94A80-M-V18

1 1 1

2 2 2

TYPE 1

16 x 11/2 x 5

1671 RPM

UPC#

SPEC.

CARTON

UNIT

35218 35219

94A60-L-V18 94A80-M-V18

1 1

2 2

TYPE 1

16 x 11/2 x 8

1623 RPM

35234 35235 35236 35237 35238

1910 RPM

TYPE 1

TYPE 1

20 x 1 x 12

UNIT

UPC#

16 x 1 x 5

38

A80-R2-RX: Natural Rubber A80-R2-CDR: Calendered Rubber

1671 RPM

UPC#

SPEC.

CARTON

UNIT

35221 35222 35223

94A54-K-V18 94A60-L-V18 94A80-M-V18

1 1 1

2 2 2

TYPE 1

12 x 1 x 5

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35239 35240

A80-R2-RX A80-R2-CDR

– –

1 1

TYPE 1

20 x 2 x 12

1623 RPM

UPC#

SPEC.

CARTON

UNIT

35241 35242 35243 35244 35245 35246

94A60-K-V18 94A60-L-V18 94A60-M-V18 94A80-M-V18 94A80-O-V18 94A80-P-V18

– – – – – –

2 2 2 2 2 2

94A80N/120S-V18

2 800 RPM

HARD SIDE 3/16:

35247

TYPE 1

12 x 2 x 5

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35248 35249

A80-R2-RX A80-R2-CDR

– –

1 1

TYPE 1

20 x 21/2 x 12 UPC#

SPEC.

1623 RPM CARTON

UNIT

2 800 RPM

HARD SIDE 3/16:

35251

94A80N/120S-V18 TYPE 1

12 x 21/2 x 5

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35384

A80-R2-RX

1

All Items – Same Day Shipping


94A: Semi-Friable Aluminum Oxide 72C: Black Silicon Carbide

A80-R2-RX: Natural Rubber A80-R2-CDR: Calendered Rubber

1623 RPM

TYPE 1

20 x 8 x 12

1623 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

35254 35255

94A60-K-V18 94A60-L-V18

– –

2 2

94A80N/120S-V18

2 800 RPM

35292 35293 35294 35295 35296 35297 35298 35299

94A54-J-V18 94A60-K-V18 94A60-L-V18 94A60-M-V18 94A80-J-V18 94A80-L-V18 94A80-M-V18 94A80-O-V18

– – – – – – – –

1 1 1 1 1 1 1 1

94A80N/120S-V18

1

72C60-L-VX

1 800 RPM

HARD SIDE 3/16:

35260

TYPE 1

12 x 3 x 5

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35261

A80-R2-RX

1

TYPE 1

20 x 4 x 12

1623 RPM

UPC#

SPEC.

CARTON

UNIT

35266 35267 35268 35270 35272

94A60-K-V18 94A60-L-V18 94A60-M-V18 94A80-M-V18 94A80-P-V18

– – – – –

1 1 1 1 1

HARD SIDE 3/16:

35273

HARD SIDE 3/16:

35300 SILICON CARBIDE:

35301

TYPE 5

12 x 8 x 5 ________

R/1 - 71/2 x 11/2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35302

A80-R2-RX

1 800 RPM

TYPE 7

12 x 8 x 5 ________

94A80N/120S-V18

TYPE 7

12 x4x5 ________

R/2 - 71/2 x 11/2

1 800 RPM

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35274

A80-R2-RX

1

TYPE 1

20 x 6 x 12

1623 RPM

R/2 - 71/2 x 11/2

Matching Feed Regulating Wheel

UPC#

SPEC.

35390

A80-R2-RX

CARTON

UNIT

1 800 RPM

TYPE 7

12 x 8 x 5 ________

R/2 - 71/2 x 11/2, O/S - 71/2 x 21/2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35303 35304

A80-R2-RX A80-R2-CDR

– –

1 1

UPC#

SPEC.

CARTON

UNIT

35277 35278 35279 35280 35281 35282 35283 35284 35285

94A60-J-V18 94A60-K-V18 94A60-L-V18 94A60-M-V18 94A80-J-V18 94A80-L-V18 94A80-M-V18 94A80-O-V18 94A80-P-V18

– – – – – – – – –

1 1 1 1 1 1 1 1 1

20 x 10 x 12

UPC#

SPEC.

CARTON

UNIT

94A80N/120S-V18

1

35309

94A60-K6

2

72C60-L-VX

1 800 RPM

24 x 2 x 12

HARD SIDE 3/16:

35286

TYPE 1

UPC#

SPEC.

CARTON

UNIT

94A60-L-V18

1 800 RPM

TYPE 7

R/2 - 8 x 11/2, O/S - 8 x 2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35308

A80-R2-RX

1

TYPE 1

24 x 11/2 x 12

SILICON CARBIDE:

35287

TYPE 7

12 x 6 x 5 ________

R/2 - 71/2 x 11/2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35288 35289

A80-R2-RX A80-R2-CDR

– –

1 1 800 RPM

TYPE 7

12 x6x5 ________

R/2 - 71/2 x 1/2, O/S - 71/2 x 11/2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35290 35291

A80-R2-RX A80-R2-CDR

– –

1 1

1623 RPM

35306 12 x 10 x 5 ________

Centerless, cylindrical & Feed regulating wheels

TYPE 1

20 x 3 x 12

1623 RPM

TYPE 1

1353 RPM

UPC#

SPEC.

CARTON

UNIT

35314 35315 35316 35318

94A60-K-V18 94A60-L-V18 94A60-M-V18 94A80-O-V18

– – – –

2 2 2 2

94A80N/120S-V18

2

HARD SIDE 3/16:

35319

TYPE 1

24 x 21/2 x 12 UPC#

SPEC.

1353 RPM CARTON

UNIT

2

SEMI-FRIABLE ALUMINUM OXIDE - HARD SIDE 3/16:

35321

94A80N/120S-V18

All Items – Same Day Shipping

39


Centerless, cylindrical & Feed regulating wheels

94A: Semi-Friable Aluminum Oxide 72C: Black Silicon Carbide

A80-R2-RX: Natural Rubber A80-R2-CDR: Calendered Rubber

TYPE 1

24 x 3 x 12

1353 RPM

TYPE 1

24 x 8 x 12

1353 RPM

UPC#

SPEC.

CARTON

UNIT

UPC#

SPEC.

CARTON

UNIT

35324

94A60-K-V18

1

94A80N/120S-V18

1

35352 35353 35354 35355 35356 35358

94A60-K5-V18 94A60-L5-V18 94A60-M6-V18 94A80-J5-V18 94A80-L5-V18 94A80-O6-V18

– – – – – –

1 1 1 1 1 1

72C60-L6-VX

1 650 RPM

HARD SIDE 3/16:

35327 24 x 3 x 12 ___________ R/1 - 141/2 x 1

TYPE 5

1353 RPM

UPC#

SPEC.

CARTON

UNIT

35329

94A60-K-V18

1

35360

TYPE 1

24 x 4 x 12

1353 RPM

UPC#

SPEC.

CARTON

UNIT

35333 35334 35337 35338

94A60-K-V18 94A60-L-V18 94A80-M-V18 94A80-O-V18

– – – –

1 1 1 1

94A80N/120S-V18

1

HARD SIDE 3/16:

35339

TYPE 1

24 x 6 x 12

1353 RPM

UPC#

SPEC.

CARTON

UNIT

35342 35343 35344 35345 35347 35348

94A60-K-V18 94A60-L-V18 94A60-M-V18 94A80-J-V18 94A80-M-V18 94A80-O-V18

– – – – – –

1 1 1 1 1 1

94A80N/120S-V18

1

HARD SIDE 3/16:

35349 SILICON CARBIDE:

35350

SILICON CARBIDE: TYPE 7

14 x 8 x 5 ________

R/2 - 8 x 11/2, O/S - 8 x 2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35361

A80-R2-RX

1 650 RPM

TYPE 7

14 x 8 x 5 ________

R/2 - 8 x 11/2, O/S - 8 x 21/2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35362

A80-R2-RX

1

TYPE 1

24 x 10 x 12 UPC#

SPEC.

CARTON

UNIT

35363 35364 35365

94A60-K5-V18 94A60-L5-V18 94A60-M6-V18

– – –

1 1 1

TYPE 1

24 x 20 x 12

1

1353 RPM

UPC#

SPEC.

CARTON

UNIT

35368 35369 35370

94A60-K5-V18 94A60-L5-V18 94A60-M6-V18

– – –

1 1 1 650 RPM

TYPE 7

14 x 20 x 5 _________

72C60-L6-VX

1353 RPM

R/2 - 8 x 11/2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35371

A80-R2-RX

1 650 RPM

TYPE 7

14 x 20 x 6 __________ R/2 - 81/2 x 11/2

Matching Feed Regulating Wheel

UPC#

SPEC.

CARTON

UNIT

35372

A80-R2-RX

1

CLOSEOUTS* TYPE 1

16 x 2 x 8 UPC#

SPEC.

CARTON

UNIT

35231

94A80-M5-V18

1

2

TYPE 1

24 x 11/2 x 12

40

1671 RPM

1353 RPM

UPC#

SPEC.

CARTON

UNIT

35310

94A60-M6-V18

2

TYPE 1

16 x 2 x 8 UPC#

1353 RPM

SPEC.

CARTON

UNIT

94A80N/120S-V18

1

HARD SIDE 3/16:

35359

*Available while supplies last.

All Items – Same Day Shipping


RX: Natural Rubber CDR: Calendered Rubber

R/2: Recess Two Sides - Type 7 Wheel R/1: Recess One Side - Type 5 Wheel O/S: Other Side of Wheel

Natural Rubber

UPC#

SIZE

SHAPE

RPM

SPEC.

CARTON

UNIT

35373

T1

1000

A80-R2-RX

2

35374

8x2x3 8x4x3

R/1 - 41/4 x 1/2 O/S - 41/2 x 11/2

T5

1000

A80-R2-RX

1

35375

T1

970

A80-R2-RX

1

35376

9x2x4 9x4x4

R/2 - 51/4 x 5/8

T7

970

A80-R2-RX

1

35377

10 x 6 x 5 /2

T7

920

A80-R2-RX

1

35239 35248 35384 35261

12 x 1 x 5 12 x 2 x 5 12 x 21/2 x 5 12 x 3 x 5 12 x 4 x 5

T1 T1 T1 T1

800 800 800 800

A80-R2-RX A80-R2-RX A80-R2-RX A80-R2-RX

– – – –

1 1 1 1

T7

800

A80-R2-RX

1

T7

800

A80-R2-RX

1

35274 35290

1

R/2 - 61/2 x 1/2

R/2 - 71/2 x 1/2

12 x 6 x 5

R/2 - 71/2 x 1/2 O/S - 71/2 x 11/2

35288

R/2 - 71/2 x 11/2

12 x 6 x 5

T7

800

A80-R2-RX

1

35302

R/1 - 71/2 x 11/2

12 x 8 x 5

T5

800

A80-R2-RX

1

35390

R/2 - 71/2 x 11/2

12 x 8 x 5

T7

800

A80-R2-RX

1

T7

800

A80-R2-RX

1

T7

800

A80-R2-RX

1

T7

650

A80-R2-RX

1

T7

650

A80-R2-RX

1

35303 35308

12 x 8 x 5

R/2 - 71/2 x 11/2 O/S - 71/2 x 21/2

12 x 10 x 5 R/2 - 8 x 11/2 O/S - 8 x 2

14 x 8 x 5

35361

R/2 - 8 x 11/2 O/S - 8 x 2

35362

R/2 - 8 x 11/2 O/S - 8 x 21/2

14 x 8 x 5

35371

14 x 20 x 5 R/2 - 8 x 11/2

T7

650

A80-R2-RX

1

35372

R/2 - 81/2 x 11/2

14 x 20 x 6

T7

650

A80-R2-RX

1

FEED REGULATING WHEEL MASTER

Calendered Rubber

UPC#

SIZE

SHAPE

RPM

SPEC.

CARTON

UNIT

35240 35249

12 x 1 x 5 12 x 2 x 5 12 x 6 x 5

T1 T1

800 800

A80-R2-CDR A80-R2-CDR

– –

1 1

T7

800

A80-R2-CDR

1

12 x 6 x 5

T7

800

A80-R2-CDR

1

T7

800

A80-R2-CDR

1

35291 35289 35304

R/2 - 7 x 1/2 O/S - 71/2 x 11/2 R/2 - 71/2 x 11/2

12 x 8 x 5

R/2 - 71/2 x 11/2 O/S - 71/2 x 21/2

Centerless, cylindrical & Feed regulating wheels

FEED REGULATING WHEEL MASTER

All Items – Same Day Shipping

41


Centerless, cylindrical & Feed regulating wheels

RX: Natural Rubber CDR: Calendered Rubber

42

R/2: Recess Two Sides - Type 7 Wheel R/1: Recess One Side - Type 5 Wheel O/S: Other Side of Wheel

CLOSEOUTS* FEED REGULATING WHEEL MASTER UPC#

SIZE

Natural Rubber SHAPE

RPM

SPEC.

CARTON

UNIT

35378

10 x 8 x 41/2 R/2 - 55/8 x 1/2

T7

920

A80-R2-RX

1

35379 35380 35382 35394 35312 35322

11 x 8 x 61/2 12 x 1/2 x 5 12 x 11/2 x 5 14 x 1 x 5 14 x 11/2 x 5 14 x 21/2 x 5

T1 T1 T1 T1 T1 T1

800 800 800 650 650 650

A80-R2-RX A80-R2-RX A80-R2-RX A80-R2-RX A80-R2-RX A80-R2-RX

– – – – – –

1 2 2 4 2 2

FEED REGULATING WHEEL MASTER

Calendered Rubber

UPC#

SIZE

SHAPE

RPM

SPEC.

CARTON

UNIT

35410 35313 35323

12 x 11/2 x 5 14 x 11/2 x 5 14 x 21/2 x 5

T1 T1 T1

800 650 800

A80-R2-CDR A80-R2-CDR A80-R2-CDR

– – –

4 2 2

*Available while supplies last.

All Items – Same Day Shipping


Tool & Cutter Wheels

43


Tool & Cutter Wheels

Tool & Cutter Wheels The standard shapes most commonly used in tool & cutter grinding are: • T-6 - Straight Cup Wheel • T-11 - Flaring Cup • T-12 - Dish Wheels • T-50 - Plate Mount Wheels The shape of the wheel is determined by the shape, size, and accessibility of the part to be ground. When grinding peripheral cutters, cup wheels are used. Dish wheels are best for formed cutters. • WA - Used when a good cuting action is needed on all steels. When a sharp corner or radius must be held, use fine grits combined with J or K hardness. • GC - Used for non-ferrous metals such as cemented materials. • PA - Used for high alloy steel applications such as sharpening HSS cutters, reamers and chisels. • AS3 - Used for fast metal removal; excellent for grinding 50 Rockwell C and harder. Master Selection Stock Sheet

WA: White Premium Aluminum Oxide PA: Pink Aluminum Oxide SIZE

AS3: Ceramic Aluminum Oxide GC: Green Silicon Carbide

WA 46H

WA 46I

WA 46J

WA 46K

WA 60I

WA 60J

WA 60K

WA 80J

WA 80K

PA 46I

PA 46K

PA 60I

PA 60K

PA 80K

AS3 46I

AS3 60J

AS3 60K

GC 60I

GC 80I

GC 100I

GC 120I

PG #

46

46

46

46

46

46

46

46

4 x 2 x 20mm Deckel Cup

T6

4/3 x 11/2 x 11/4 Flaring Cup

T11

5/33/4 x 13/4 x 11/4 Flaring Cup

T11

5 x 11/2 x 11/4 Straight Cup

T6

6 x 2 x 11/4 Straight Cup

T6

6 x 1/2 x 11/4 Dish Wheel

T12

6 x 3/4 x 11/4 Dish Wheel

T12

6x1x4 Plate Mount Wheel T50

Tool Room Wheels

Almost all manufacturing plants have a tool room which is involved with the maintenance and repair of cutting tools, and the overall maintenance and repair of the plant itself. Typical grinding operations done in the tool room are: 1. Surface Grinding 2. Tool & Cutter Grinding 3. Internal Grinding 4. Cutoff With the exception of cutoff, most wheels are vitrified bond. These wheel come in various shapes and sizes. Operations are generally dry. 44

All Items – Same Day Shipping


Common Troubleshooting Problems in Tool & Cutter Grinding Problem 1. Corner breakdown of wheel

2. Burning of workpiece

4. Wheel loading or glazing

Suggested Correction Slow down dressing cycle Use finer grit wheel Use harder grade wheel Check for run-out Increase or direct coolant to point of contact Dress wheel faster or use softer wheel Increase work speed Reduce amount of stock removed per pass Slow down dressing cycle or use harder grade wheel Dress wheel finer or use finer grit wheel Check worn bearings Filter coolant more thoroughly Test softer grade wheel Test coarser grit wheel Check coolant filter Dress more often and aggressively

Starting Recommendations Alloys & High Speed Steel Operation Broaches Sharpening Backing Off Reamers Cylindrical Backing Off Taps Sharpening Squaring End Touch Up Flute Boring Tools Drills – Sharpening Offhand – Under 1/4" Offhand – 1/4"-1" Offhand – Over 1" Drills – Machine Sharpening Under 1/4" Diameter 1/4"-1" Diameter Over 1" Diameter Pointing Hobs Tool & Cutter Milling Cutters Face & Side Mill End Mills Formed Cutters Shell End Mills (L) Shell End Mills (S) Side Mills (S) Carbide Grinding Straight Wheels Cup Wheels

Wheel Type

Recommendation

12 6

WA80K WA60K

1 1&6

WA60K WA60J

6

AZ60K AZ60K AZ60J AZ60J

1 1 1

WA80J WA60K WA46K

6 6 6 1

WA80J WA60K WA46K WA80K

12

WA60J

1 11 12 6 1 1&6

AZ46K AZ60J AZ60J AZ46J AZ60J AZ60J

1 6 & 11

GC80I GC80I

1

All Items – Same Day Shipping

Tool & Cutter Wheels

3. Poor surface finish

Things to Check How wheel was dressed Wheel too coarse Wheel too soft Worn machine bearings Check coolant flow Wheel too hard Work speed too slow Infeed too fast Wheel too soft Wheel too coarse Machine vibration Dirty coolant Wheel too hard Wheel too fine Dirty coolant Poor wheel dressing

45


WA: White Premium Aluminum Oxide GC: Green Silicon Carbide

PA: Pink Aluminum Oxide AS3: Ceramic Aluminum Oxide Grain

TYPE 6

4 x 2 x 20mm UPC#

SPEC.

6685 RPM CARTON

UNIT

WA80-J-V

Tool & Cutter Wheels

10

TYPE 11

4/3 x 11/2 x 11/4 UPC#

SPEC.

20 6685 RPM

CARTON

UNIT

WHITE ALUMINUM OXIDE:

34903 34904 34906 34907 34908 34909

UPC#

WA46-J-V WA46-K-V WA60-I-V WA60-J-V WA60-K-V WA80-K-V

SPEC.

CARTON

UNIT

10 10 10 10 10 10

20 20 20 20 20 20

10 10 10 10

20 20 20 20

34941

WA60-K-V

10

20

TYPE 12

6 x 1/2 x 11/4

4456 RPM

UPC#

SPEC.

CARTON

UNIT

34942 34943 34944

WA46-K-V WA60-J-V WA60-K-V

10 10 10

20 20 20

TYPE 12

6 x 3/4 x 11/4

4456 RPM

UPC#

SPEC.

CARTON

UNIT

34947

WA60-K-V

10

20

PINK ALUMINUM OXIDE:

58054 58055 58056 58057

PA46-K-V PA60-I-V PA60-K-V PA80-K-V

CERAMIC ALUMINUM OXIDE:

34200 34201

10 10

TYPE 11

UPC#

6x1x4 UPC#

20 20 5348 RPM

SPEC.

CARTON

UNIT

WA46-H-V WA46-I-V WA46-J-V WA46-K-V WA60-I-V WA60-J-V WA60-K-V WA80-K-V

10 10 10 10 10 10 10 10

20 20 20 20 20 20 20 20

PINK ALUMINUM OXIDE:

58058 58059 58060

10 10 10

20 20 20

10 10

20 20

10

20

CERAMIC ALUMINUM OXIDE:

AS3-46-I-VCER AS3-60-J-VCER GC60-I-V TYPE 6

5 x 1 /2 x 1 /4 1

1

UPC#

5348 RPM

SPEC.

CARTON

UNIT

WA46-J-V WA46-K-V WA60-J-V WA60-K-V WA80-K-V

10 10 10 10 10

20 20 20 20 20

WHITE ALUMINUM OXIDE:

34929 34930 34933 34934 34936

UNIT

34948

WA46-K-V

10

20

34949 34950 34951 34952

10 10 10 10

20 20 20 20

GC60-I-V GC80-I-V GC100-I-V GC120-I-V

CLOSEOUTS* TYPE 11

4/3 x 11/2 x 11/4 UPC#

6685 RPM

SPEC.

CARTON

UNIT

GC80-I-V GC100-I8

10 10

20 20

GREEN SILICON CARBIDE:

34912 34913

TYPE 11

5/33/4 x 13/4 x 11/4

5348 RPM

SPEC.

CARTON

UNIT

WA60-H-V

10

20

WHITE ALUMINUM OXIDE:

34918

TYPE 11

5 x 13/4 x 11/4 UPC#

5348 RPM

SPEC.

CARTON

UNIT

WA60-L8

10

20

WHITE ALUMINUM OXIDE:

34922

GREEN SILICON CARBIDE:

34924

CARTON

UPC#

PA46-I-V PA46-K-V PA60-K-V

34203 34204

SPEC.

WHITE ALUMINUM OXIDE:

WHITE ALUMINUM OXIDE:

34914 34915 34916 34917 34919 34920 34921 34923

3450 RPM

TYPE 50

GREEN SILICON CARBIDE:

AS3-46-I-VCER AS3-60-K-VCER

5/33/4 x 13/4 x 11/4

46

6685 RPM

WHITE ALUMINUM OXIDE:

WHITE ALUMINUM OXIDE:

34900

TYPE 6

6 x 2 x 11/4

TYPE 6

5 x 11/2 x 11/4 UPC#

5348 RPM

SPEC.

CARTON

UNIT

GC60-I-V GC80-I8

10 10

20 20

GREEN SILICON CARBIDE:

34937 34938

*Available while supplies last.

All Items – Same Day Shipping


Bench & Pedestal Wheels

47


Bench & Pedestal Wheels

BENCH & PEDESTAL WHEELS

6"-18" Diameter

Straight vitrified wheels used for off-hand tool sharpening and grinding. Common settings for bench and pedestal grinders are in maintenance departments, tool & die shops and metal fabrication shops. • A - Aluminum Oxide for general purpose off-hand work. • GC - Green Silicon Carbide for non-ferrous metals, tungsten carbide for sharpening carbide tools in tool rooms. • AZ - Premium Blue Aluminum Oxide for HSS over 55 RC and above, high carbon tool steels and woodworking applications. Engineered for free cutting action while pulling heat away from the part and into the matrix of the wheel. • WA - White Aluminum Oxide highly friable grain for fast and cool cutting. Light grinding of all types of steel including tool and die steels; fast sharpening of all tools. Master Selection Stock Sheet – Available in either single pack or bulk pack

A: Brown Aluminum Oxide GC: Green Silicon Carbide SIZE

6 x 1/2 x H* 6 x 3/4 x H* 6 x 1 x H* 7 x 3/4 x H* 7 x 1 x H* 8 x 3/4 x H* 8 x 1 x H* 10 x 1 x 11/4 10 x 11/4 x 11/4 10 x 11/2 x 11/4 10 x 2 x 11/4 12 x 1 x 11/4 12 x 11/2 x 11/4 12 x 2 x 11/2 14 x 2 x 11/2 14 x 3 x 11/2 16 x 3 x 11/2 18 x 3 x 11/2 SIZE

6 x 3/4 x 1 (H*) 6 x 1 x 1 (H*) 7 x 1 x 1 (H*) 8 x 1 x H*

AZ: Premium Blue Aluminum Oxide WA: White Aluminum Oxide

A 24Q

A 24/30Q

A 30/36-O

A 36-O

A 46M

A 46/54M

A 54M

A 60M

A 80M

GC 60I

GC 80I

GC 100I

CARTON PG #

SINGLE BOX PG #

• • • • • – • • – • – • • • • – • •

– – – – – – – – – – – – – – – • – –

– – – – – – – – – – • – – – – – – –

– • • • • – • • – • – – • • • – – •

• • • • • • • • – • – • • • • – – –

– – – – – – – – • – – – – – – • – –

– – – – – – – – – – • – – – – – • •

• • • • • – • • – • – • • • • – – –

• • • • • – • • – • – – – • • – – –

• • • • • – • • – • – • • • • – – –

• • • • • – • • – • – • • • • – – –

• • • • • – • • – • – • – • – – – –

49 49 49 49 49 49 49 – 49 – 49 – – – – – – –

50 50 50 50 51 – – 51 – 51 – 51 51 51 51 52 52 52

WA 60K

WA 120K

AZ 36K

AZ 60K

AZ 80K

AZ 120K

PG #

• • • •

• • • •

• • • •

• • • •

• • • •

• • • •

50 50 51 51

*H = installed telescopic bushings 3/4, 5/8, & 1/2"

Guide to Grit Sizes Aluminum Oxide 24 - 30 - Rough grinding 36 - 46 - General purpose work 60 - 80 - Finish grinding

48

Silicon Carbide 60 - Rough/general purpose (resharpening carbide saws) 80 - General purpose (tools) 100 - Finish grinding (tools)

All Items – Same Day Shipping


CARTON PACK BENCH & PEDESTAL WHEELS Wheels packed in carton quantity with cardboard divider A: Brown Aluminum Oxide H*: 1" Hole, Installed Telescopic Bushings for 3/4", 5/8", and 1/2" Arbors GC: Green Silicon Carbide H2: 1-1/4" Hole, Installed Telescopic Bushings for 1" and 3/4" Arbors H4: 1-1/4" Hole, Installed Telescopic Bushings for 1", 3/4", 5/8" and 1/2" Arbors TYPE 1

UPC#

SPEC.

4456 RPM CARTON

UNIT

GC60-I-V GC80-I-V GC100-I-V

10 10 10

TYPE 1

6 x 3/4 x 1 (H*) UPC#

SPEC.

20 20 20 4456 RPM

CARTON

UNIT

BROWN ALUMINUM OXIDE:

35008 35009 35010 35011 35012

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

10 10 10 10 10

20 20 20 20 20

GREEN SILICON CARBIDE:

35013 35014 35015

10 10 10

TYPE 1

6 x 1 x 1 (H*) UPC#

20 20 20 4456 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

10 10 10 10 10

20 20 20 20 20

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

BROWN ALUMINUM OXIDE:

GREEN SILICON CARBIDE:

35022 35023 35024

TYPE 1

7 x 3/4 x 1 (H*) UPC#

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

10 10 10 10 10

20 20 20 20 20

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

35034 35035 35036 35037 35038 GREEN SILICON CARBIDE:

35039 35040 35041

TYPE 1

8 x 3/4 x 1 (H4) UPC#

SPEC.

CARTON

UNIT

3760 RPM

SPEC.

CARTON

UNIT

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

35044

A46-M-V

10

20

TYPE 1

8 x 1 x 11/4 (H4) UPC#

3600 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

10 10 10 10 10

20 20 20 20 20

GC60-I-V GC80-I-V GC100-I-V

10 10 10

20 20 20

BROWN ALUMINUM OXIDE:

35046 35047 35048 35049 35050 GREEN SILICON CARBIDE:

35051 35052 35053

TYPE 1

10 x 11/4 x 11/4 UPC#

2483 RPM

SPEC.

CARTON

UNIT

A46/54-M-V

5

10

BROWN ALUMINUM OXIDE:

35064

GREEN SILICON CARBIDE:

35031 35032 35033

3600 RPM

BROWN ALUMINUM OXIDE:

GC60-I-V GC80-I-V GC100-I-V

35017 35018 35019 35020 35021

UPC#

3760 RPM

BROWN ALUMINUM OXIDE:

GREEN SILICON CARBIDE:

35005 35006 35007

TYPE 1

7 x 1 x 1 (H*)

BENCH & PEDESTAL WHEELS

6 x 1/2 x 1 (H*)

TYPE 1

10 x 2 x 11/4 (H2) UPC#

2483 RPM

SPEC.

CARTON

UNIT

A30/36-O-V A54-M-V

2 2

4 4

BROWN ALUMINUM OXIDE:

35073 35074

All Items – Same Day Shipping

49


SINGLE PACK BENCH & PEDESTAL WHEELS Each wheel packed in a white craft box with description and barcode.

BENCH & PEDESTAL WHEELS

A: Brown Aluminum Oxide AZ: Premium Blue Aluminum Oxide GC: Green Silicon Carbide H*: 1" Hole, Installed Telescopic Bushings for 3/4", 5/8", and 1/2" Arbors WA: White Aluminum Oxide TYPE 1

6 x 1/2 x 1 (H*) UPC#

SPEC.

4456 RPM CARTON

UNIT

BROWN ALUMINUM OXIDE:

38001 38003 38004 38005

A24-Q-V A46-M-V A60-M-V A80-M-V

1 1 1 1

10 10 10 10

GC60-I-V GC80-I-V GC100-I-V

1 1 1

10 10 10

TYPE 1

6 x 3/4 x 1 (H*) UPC#

4456 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

10 10 10 10 10

1 1 1 1

10 10 10 10

1 1

10 10

1 1 1

10 10 10

BROWN ALUMINUM OXIDE:

38006 38007 38008 38009 38010

PREMIUM BLUE ALUMINUM OXIDE:

38111 38113 38114 38116

AZ36-K8-V3 AZ60-K8-V3 AZ80-K8-V3 AZ120-K8-V3

WHITE ALUMINUM OXIDE:

38613 38616

WA60-K-V WA120-K-V

GREEN SILICON CARBIDE:

38504 38505 38506

TYPE 1

UPC#

4456 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

10 10 10 10 10

1 1 1

10 10 10

BROWN ALUMINUM OXIDE:

38623 38626

50

CARTON

UNIT

WA60-K-V WA120-K-V

1 1

10 10

1 1 1

10 10 10

GREEN SILICON CARBIDE:

38507 38508 38509

GC60-I-V GC80-I-V GC100-I-V TYPE 1

7 x 3/4 x 1 (H*) UPC#

3760 RPM

SPEC.

CARTON

UNIT

A46-M-V A60-M-V

1 1

10 10

GC60-I-V GC80-I-V GC100-I-V

1 1 1

10 10 10

BROWN ALUMINUM OXIDE:

38561 38562 GREEN SILICON CARBIDE:

38510 38511 38512

TYPE 1

7 x 1 x 1 (H*) UPC#

3760 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

10 10 10 10 10

1 1 1 1

10 10 10 10

1 1

10 10

1 1 1

10 10 10

BROWN ALUMINUM OXIDE:

38016 38017 38018 38019 38020 38161 38163 38164 38166

AZ36-K8-V32A AZ60-K8-V32A AZ120-K8-V32A

AZ36-K8-V32A AZ60-K8-V32A AZ80-K8-V32A AZ120-K8-V32A

WHITE ALUMINUM OXIDE:

38663 38666

WA60-K-V WA120-K-V

GREEN SILICON CARBIDE:

38513 38514 38515

PREMIUM BLUE ALUMINUM OXIDE:

38121 38123 38126

SPEC.

PREMIUM BLUE ALUMINUM OXIDE:

GC60-I-V GC80-I-V GC100-I-V

6 x 1 x 1 (H*)

38011 38012 38013 38014 38015

UPC#

4456 RPM

WHITE ALUMINUM OXIDE:

GREEN SILICON CARBIDE:

38501 38502 38503

TYPE 1

6 x 1 x 1 (H*)

All Items – Same Day Shipping

GC60-I-V GC80-I-V GC100-I-V


SINGLE PACK BENCH & PEDESTAL WHEELS Each wheel packed in a white craft box with description and barcode. A: Brown Aluminum Oxide AZ: Premium Blue Aluminum Oxide GC: Green Silicon Carbide H*: 1" Hole, Installed Telescopic Bushings for 3/4", 5/8", and 1/2" Arbors WA: White Aluminum Oxide H2: 1-1/4" Hole, Installed Telescopic Bushings for 1" and 3/4" Arbors H4: 1-1/4" Hole, Installed Telescopic Bushings for 1", 3/4", 5/8" and 1/2" Arbors

UPC#

SPEC.

3600 RPM CARTON

UNIT

BROWN ALUMINUM OXIDE:

38021 38022 38023 38024 38025

TYPE 1

12 x 1 x 11/4 (H2) UPC#

CARTON

UNIT

A24-Q-V A46-M-V A60-M-V

1 1 1

2 2 2

GC60-I-V

1

2

BROWN ALUMINUM OXIDE:

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

10 10 10 10 10

1 1 1 1

10 10 10 10

1 1

10 10

1 1 1

10 10 10

38036 38038 38039 GREEN SILICON CARBIDE:

38525

PREMIUM BLUE ALUMINUM OXIDE:

38201 38203 38204 38206

AZ36-K8-V32A AZ60-K8-V32A AZ80-K8-V32A AZ120-K8-V32A

WHITE ALUMINUM OXIDE:

38703 38706

WA60-K-V WA120-K-V

GREEN SILICON CARBIDE:

38516 38517 38518

UPC#

2483 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

5 5 5 5 5

BROWN ALUMINUM OXIDE:

GREEN SILICON CARBIDE:

GC60-I-V GC80-I-V GC100-I-V

1 1 1

10 x 11/2 x 11/4 (H2) UPC#

5 5 5 2483 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

4 4 4 4 4

GC60-I-V GC80-I-V GC100-I-V

1 1 1

4 4 4

BROWN ALUMINUM OXIDE:

GREEN SILICON CARBIDE:

38522 38523 38524

SPEC.

CARTON

UNIT

38041 38042 38043 38044

A24-Q-V A36-O-V A46-M-V A60-M-V

1 1 1 1

2 2 2 2

38528 38529

GC60-I-V GC80-I-V

1 1

2 2

TYPE 1

UPC#

2220 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

3 3 3 3 3

GC60-I-V GC80-I-V GC100-I-V

1 1 1

3 3 3

BROWN ALUMINUM OXIDE:

38046 38047 38048 38049 38050 GREEN SILICON CARBIDE:

38531 38532 38533

TYPE 1

14 x 2 x 11/2 (H3)

TYPE 1

38031 38032 38033 38034 38035

UPC#

2220 RPM

BROWN ALUMINUM OXIDE:

12 x 2 x 11/2 (H3)

TYPE 1

10 x 1 x 11/4 (H2)

38519 38520 38521

TYPE 1

12 x 11/2 x 11/4 (H2)

GREEN SILICON CARBIDE:

GC60-I-V GC80-I-V GC100-I-V

38026 38027 38028 38029 38030

2220 RPM

SPEC.

BENCH & PEDESTAL WHEELS

TYPE 1

8 x 1 x 11/4 (H4)

UPC#

1773 RPM

SPEC.

CARTON

UNIT

A24-Q-V A36-O-V A46-M-V A60-M-V A80-M-V

1 1 1 1 1

3 3 3 3 3

GC60-I-V GC80-I-V

1 1

3 3

BROWN ALUMINUM OXIDE:

38051 38052 38053 38054 38055 GREEN SILICON CARBIDE:

38534 38535

All Items – Same Day Shipping

51


SINGLE PACK BENCH & PEDESTAL WHEELS Wheels packed in carton quantity with cardboard divider A: Brown Aluminum Oxide H3: 1-1/2" Hole, Installed Telescopic Bushings for 1-1/4" and 1" Arbors TYPE 1

BENCH & PEDESTAL WHEELS

14 x 3 x 11/2 -11/4 UPC#

SPEC.

1773 RPM CARTON

UNIT

BROWN ALUMINUM OXIDE:

35107 35108

A24/30-Q-V A46/54-M-V

1 1

TYPE 1

16 x 3 x 11/2 UPC#

3 3 1550 RPM

SPEC.

UNIT

A24-Q-V A54-M-V

1 1

BROWN ALUMINUM OXIDE:

35109 35110

TYPE 1

18 x 3 x 11/2 UPC#

BENCH WHEEL BUSHINGS UPC#

SPEC.

UNIT

51000 51001 51002 51003 51004 51005 51006 51007 51008

/2" Wide (Thick) 1"-1/2" 3 /4" Wide (Thick) 1"-1/2" 1" Wide (Thick) 1"-1/2" 1 /2" Wide (Thick) 11/4"-1/2" 3 /4" Wide (Thick) 11/4"-1/2" 1" Wide (Thick) 11/4"-1/2" 1 /2" Wide (Thick) 11/2"-11/4" 3 /4" Wide (Thick) 11/2"-11/4" 1" Wide (Thick) 11/2"-11/4"

1 1 1 1 1 1 1 1 1

1

1485 RPM

SPEC.

UNIT

A24-Q-V A36-O-V A54-M-V

1 1 1

BROWN ALUMINUM OXIDE:

35112 35113 35114

CLOSEOUTS* TYPE 1

6 x 3/4 x 1 (H*) UPC#

SPEC.

4456 RPM CARTON

UNIT

WHITE ALUMINUM OXIDE:

38611 38612

WA36-K-V WA46-K-V

1 1

10 10

PA36-K-V

1

10

TYPE 1

6 x 1 x 1 (H*) UPC#

SPEC.

4456 RPM CARTON

UNIT

1

10

PREMIUM BLUE ALUMINUM OXIDE

38124

AZ80-K8-V32A

WHITE ALUMINUM OXIDE:

38621 38622

SPEC.

CARTON

UNIT

38661

WA36-K-V

1

10

PA54-K-V PA36-K-V PA60-K-V PA120-K-V

1 1 1 1

10 10 10 10

PINK ALUMINUM OXIDE:

38549 38961 38963 38966

TYPE 1

8 x 1 x 1 (H*) UPC#

3600 RPM

SPEC.

CARTON

UNIT

WA46-K-V

1

10

PA60-K-V

1

10

WHITE ALUMINUM OXIDE:

WA36-K-V WA46-K-V

1 1

10 10

38702 PINK ALUMINUM OXIDE:

39023

PINK ALUMINUM OXIDE:

38923 38926

UPC#

3760 RPM

WHITE ALUMINUM OXIDE:

PINK ALUMINUM OXIDE:

38911

TYPE 1

7 x 1 x 1 (H*)

PA60-K-V PA120-K-V

1 1

10 10

TYPE 1

12 x 11/2 x 11/4 (H2) UPC#

2220 RPM

SPEC.

CARTON

UNIT

A80-M-V

1

2

BROWN ALUMINUM OXIDE:

38045

*Available while supplies last.

52

All Items – Same Day Shipping


Premium Pink Aluminum Oxide

Used in almost every industry but primarily in tool and die shops, and foundries. General applications: Deburring, tool sharpening, finishing cavities, and removes mold marks and parting lines. Mounted points are classified by shape groups A, B, and W. The semi-friable pink PA abrasive is used to produce sharp, consistent cutting action. PA: Premium Pink Aluminum Oxide

A-SHAPE MOUNTED POINTS

RPM*

UPC#

SIZE

DIMENSION

35951 35953 35954 35955 35957 35975

A-1 A-3 A-4 A-5 A-11 A-38

/8" x 21/2" 7 /8" x 23/4" 1 1 /4" x 11/4" 3 /4" x 11/8" 7 /8" x 2" 1" x 1"

SHANK

7

/4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1

Shank Shank Shank Shank Shank Shank

CARTON

UNIT

10 10 10 10 10 10

20 20 20 20 20 20

B-SHAPE MOUNTED POINTS

RPM*

UPC#

SIZE

35980 35985 36009

B-44 B-52 B-132

DIMENSION

SHANK

CARTON

UNIT

/32" x /8" /8" x 3/4" 3 /8" x 1/2"

/8" Shank /8" Shank 1 /8" Shank

10 10 10

20 20 20

7

3

3

1 1

W-SHAPE MOUNTED POINTS

RPM*

UPC#

SIZE

DIMENSION

36042 36058 36060 36067

W-189 W-220 W-222 W-236

/2" x 1" 1" x 1" 1" x 2" 11/2" x 1/2"

SHANK

1

/8" 1 /4" 1 /4" 1 /4" 1

Shank Shank Shank Shank

CARTON

UNIT

10 10 10 10

20 20 20 20

Mounted Points, dressing wheels, sticks & hones

Mounted Points

* No matter what factors of wheel size, shape, specification, mandrel size, overhang, or machine conditions are changed, the speed of 10,000 SFPM shall not be exceeded.

Dressing Wheels, Sticks & Hones

Combination Stone: Designed to clean magnetic chucks. Dressing Wheels: Break control devices used for dressing/opening diamond wheels. Dressing Sticks: Dressing and opening vitrified bonded wheels. SILICON CARBIDE UPC#

SILICON CARBIDE SIZE

SPEC.

CARTON

UNIT

ROUND - COMBINATION STONE:

35902

4 x 11/2

C150/320-MN7

SILICON CARBIDE UPC#

UPC#

SIZE

SPEC.

CARTON

UNIT

1x1x6

C24-S-V

50

100

DRESSING STICKS:

20

40

35909

10823 RPM SIZE

SPEC.

CARTON

UNIT

3 x 1 x 1/2 3 x 1 x 1/2 3 x 1 x 1/2

72C-60-L-V 72C80-J-XV 72C-80-L-V

20 20 20

40 40 40

DRESSING WHEELS:

35906 35907 35908

All Items – Same Day Shipping

53


Resin Cones, Plugs & Cup Wheels

Resin Cones, plugs & Cup wheels

A: Aluminum Oxide CA: Silicon Carbide / Aluminum Oxide Blend C: Silicon Carbide

Resin Cones & Plugs

Resin Cup Wheels* 4/3 x 2 x 5/8-11

CONES UPC#

SIZE

SPEC.

CARTON

UNIT

11/2 x 21/2 x 3/8-24 11/2 x 21/2 x 5/8-11 11/2 x 3 x 3/8-24 11/2 x 3 x 5/8-11 2 x 3 x 5/8-11 23/4 x 31/2 x 5/8-11 3 x 3 x 5/8-11

A16R A24R A24R A24R A24R A24R A24R

10 10 10 10 10 10 10

20 20 20 20 20 20 20

11/2 x 21/2 x 3/8-24 11/2 x 3 x 3/8-24 11/2 x 3 x 5/8-11 2 x 3 x 5/8-11 21/2 x 3 x 5/8-11

A24R A24R A24R A24R A24R

10 10 10 10 10

20 20 20 20 20

TYPE 17:

49024 49026 49027 49028 49029

SIZE

SPEC.

CARTON

UNIT

54

CARTON

UNIT

A16-Q6-B C16-N-B CA16-N-B

1 1 1

10 10 10

49001

A16-Q6-B

1

10

5/4 x 2 x 5/8-11

TYPE 11

7260 RPM

SPEC.

CARTON

UNIT

A16-Q6-B A24-Q6-B C16-N-B CA16-N-B

1 1 1 1

10 10 10 10

NO STEEL BACK:

49004 49005 49006 49007

UPC#

TYPE 11

6048 RPM

SPEC.

CARTON

UNIT

A16-Q6-B A16-Q6-B A24-Q6-B A24-Q6-B C16-N-B CA16-QB-B

5 1 5 1 1 1

10 10 10 10 10 10

A16-Q6-B A24-Q6-B C16-N-B CA16-Q6-B

1 1 1 1

10 10 10 10

NO STEEL BACK:

11/2 x 21/2 x 3/8-24 11/2 x 21/2 x 5/8-11 11/2 x 3 x 3/8-24 11/2 x 3 x 5/8-11 2 x 3 x 5/8-11 2 x 31/2 x 5/8-11

A24R A24R A24R A24R A24R A24R

10 10 10 10 10 10

20 20 20 20 20 20

11/2 x 21/2 x 3/8-24 11/2 x 21/2 x 5/8-11 11/2 x 3 x 3/8-24 11/2 x 3 x 5/8-11 2 x 3 x 5/8-11 3 x 3 x 5/8-11

A24R A24R A24R A24R A24R A24R

10 10 10 10 10 10

20 20 20 20 20 20

TYPE 18R:

49037 49038 49039 49040 49042 49043

SPEC.

WITH STEEL BACK:

6/4-3/4 x 2 x 5/8-11

TYPE 18:

49030 49031 49032 49033 49035 49036

49000 49002 49003

UPC#

PLUGS UPC#

9070 RPM

NO STEEL BACK:

TYPE 16:

49016 49017 49018 49019 49021 49022 49023

UPC#

TYPE 11

35900 49008 49010 49011 35901 49014 WITH STEEL BACK:

49009 49012 49013 49015

* 35900 and 49010 are packed 5 to a box. All other items are individually packed.

All Items – Same Day Shipping


Saturn Creep-Feed grinding wheels

Saturn Creep-Feed Grinding Wheels*

Advanced Abrasive Wheels for Jet-Engine Blades

The Saturn creep-feed grinding wheel line provides longer life for the diamond roll (less dressing), and reduced cost (more blades ground per wheel and per diamond roll). Available in 46 to 120 grit sizes; diameters upon request. • Form holding • Cool grinding • Creep feed with non-continuous dressing *Non-stock items

What Is Creep Feed Grinding?

Creep Feed Grinding is a low speed process with a relatively deep depth of cut where stock removal is generated in one pass as opposed to the numerous passes of conventional surface grinding. Creep feed grinding is performed in profile grinding (i.e. the root profiles of vanes and blades used in the aerospace and gas turbine industries). Soft, porous (open structure) wheels are used in Creep Feed Grinding for the long, large surface contact area between the wheel and work piece. The open structure allows for improved coolant penetration and easy metal chip removal from the work piece. The size of the pores in the wheel determines stock removal rates (i.e. the more “open” the wheel, the more stock that can be removed). The most acceptable dressing method for creep feed grinding wheels is known as “continuous dressing”. Continuous dressing avoids the abrasive grain from becoming loaded or coated with metal from the work piece, which can result in “burning” of the part. Continuous dressing allows for better form holding over long work pieces and reduces the generation of heat to increase stock removal rates. All Items – Same Day Shipping

55


Die Grinder Cut-Off Wheels

Die Grinder Cut-Off Wheels

• 11/2-4" Die Grinder Cut-off Wheels • 3-4" Fast Cut Die Grinder Cut-off Wheels • 6-10" Precision Non-Reinforced Toolroom Cut-off Wheels • 6-8" Precision Reinforced Toolroom Cut-off Wheels

A: Aluminum Oxide

High Speed Reinforced Cut-Off Wheels

Used on portable grinders. TYPE 1

UPC#

SIZE

SPEC.

CARTON

UNIT

11/2" CUT-OFF WHEELS

35687 35688

UPC#

SIZE

25000 RPM SPEC.

CARTON

UNIT

A60-R-BF A60-R-BF A36-R-BF A36-R-BF

50 50 50 50

100 100 100 100

3" FAST CUT CUT-OFF WHEELS

11/2 x 1/32 x 1/4 11/2 x 1/16 x 1/4

A60-R-BF A60-R-BF TYPE 1

UPC#

TYPE 1

45000 RPM

SIZE

50 50

100 100

30000 RPM SPEC.

CARTON

UNIT

A60-R-BF A60-R-BF A60-R-BF A24-R-BF

50 50 50 50

100 100 100 100

SIZE

SPEC.

CARTON

UNIT

3 x 1/32 x 1/4 3 x 1/32 x 3/8 3 x 1/16 x 1/4 3 x 1/16 x 3/8 3 x 1/16 x 1/4 3 x 1/16 x 3/8 3 x 1/8 x 1/4 3 x 1/8 x 3/8

A60-R-BF A60-R-BF A36-R-BF A36-R-BF A60-R-BF A60-R-BF A24-R-BF A24-R-BF

50 50 50 50 50 50 50 50

100 100 100 100 100 100 100 100

59102 59103 59104 59105

3 x 1/32 x 1/4 3 x 1/32 x 3/8 3 x 1/16 x 1/4 3 x 1/16 x 3/8 TYPE 1

19000 RPM

2" CUT-OFF WHEELS

35689 45066 35690 35691

2 x /32 x /8 2 x 1/16 x 1/4 2 x 1/16 x 3/8 2 x 1/8 x 3/8 1

3

TYPE 1

UPC#

25000 RPM

3" CUT-OFF WHEELS

35500 35501 35502 35503 45085 45086 35504 35505

56

UPC#

SIZE

SPEC.

CARTON

UNIT

50 50 50 50 50 50 50 50 50

100 100 100 100 100 100 100 100 100

4" HIGH SPEED REINFORCED CUT-OFF WHEELS

35506 35507 35508 35509 45087 45088 35510 35511 35512

4 x 1/32 x 1/4 4 x 1/32 x 3/8 4 x 1/16 x 1/4 4 x 1/16 x 3/8 4 x 1/16 x 3/8 4 x 1/16 x 1/4 4 x 1/16 x 5/8 4 x 1/8 x 1/4 4 x 1/8 x 3/8

A60-R-BF A60-R-BF A36-R-BF A36-R-BF A60-R-BF A60-R-BF A36-R-BF A24-R-BF A24-R-BF TYPE 1

UPC#

SIZE

19000 RPM SPEC.

CARTON

UNIT

A60-R-BF A60-R-BF A36-R-BF

50 50 50

100 100 100

4" FAST CUT CUT-OFF WHEELS

59106 59107 59108

All Items – Same Day Shipping

4 x 1/32 x 1/4 4 x 1/32 x 3/8 4 x 1/16 x 3/8


Precision Tool Room Cut-Off WHeels (Non-Reinforced)

A: Aluminum Oxide TYPE 1

UPC#

SIZE

SPEC.

CARTON

UNIT

6 x 1/32 x 1/2 6 x 1/32 x 11/4 6 x 1/16 x 1/2

A60-M8-B2 A60-M8-B2 A60-M8-B2 TYPE 1

UPC#

SIZE

25 25 25

50 50 50

SIZE

SPEC.

CARTON

UNIT

35542 35545 35547 35550

8 x 1/32 x 11/4 8 x 1/32 x 11/4 8 x 3/32 x 5/8 8 x 1/8 x 11/4

A60-M8-B2 A60-M8-B2 A60-M8-B2 A60-M8-B2

25 25 25 25

50 50 50 50

6550 RPM SPEC.

CARTON

TYPE 1

UPC#

7 x /32 x 1 /4 7 x 1/16 x 1/2 7 x 1/16 x 11/4 7 x 3/32 x 11/4 7 x 1/8 x 11/4 1

1

A60-M8-B2 A60-M8-B2 A60-M8-B2 A60-M8-B2 A60-M8-B2

25 25 25 25 25

4584 RPM

UNIT

7" CUT-OFF WHEELS

35529 35530 35532 35535 35539

UPC#

5729 RPM

8" CUT-OFF WHEELS

6" CUT-OFF WHEELS

35521 35523 35524

TYPE 1

7650 RPM

50 50 50 50 50

SIZE

SPEC.

CARTON

UNIT

10 x 1/16 x 5/8

A60-M8-B2

25

50

10" CUT-OFF WHEELS

35551

Toolroom Cut-Off Wheels

• Used on stationary grinders (Bench or Surface Grinders). • These wheels must only be used where the work is held tightly and the wheel operates on a controlled cutting surface with no movement. • Applications that require twisting or lateral stresses must use a reinforced wheel.

Precision Tool Room Cut-Off WHeels (Precision Reinforced) • Used on stationary grinders (Bench or Surface Grinders). • These wheels are designed and manufactured to tight tolerances, the fiberglass reinforcement adds extra strength. • The characteristics of these wheels are the same as the non-reinforced wheels and should not be used unless the work piece is fixed or rotates into the wheel. A: Aluminum Oxide TYPE 1

UPC#

SIZE

SPEC.

CARTON

UNIT

6 x .04 x 1/2 6 x .06 x 1/2 6 x .06 x 5/8 6 x .06 x 11/4

A60-O/P-BF A60-O/P-BF A60-O/P-BF A60-O/P-BF TYPE 1

UPC#

UPC#

5729 RPM

SIZE

SPEC.

CARTON

UNIT

8 x .04 x 1/2 8 x .04 x 11/4 8 x .06 x 1/2 8 x .06 x 5/8 8 x .06 x 3/4 8 x .06 x 11/4

A60-O/P-BF A60-O/P-BF A60-O/P-BF A60-O/P-BF A60-O/P-BF A60-O/P-BF

25 25 25 25 25 25

50 50 50 50 50 50

8" CUT-OFF WHEELS

6" CUT-OFF WHEELS

35555 35558 35559 35560

TYPE 1

7650 RPM

25 25 25 25

50 50 50 50

6550 RPM

SIZE

SPEC.

CARTON

UNIT

7 x .04 x 1/2 7 x .04 x 5/8 7 x .04 x 11/4 7 x .06 x 1/2 7 x .06 x 5/8 7 x .06 x 11/4

A60-O/P-BF A60-O/P-BF A60-O/P-BF A60-O/P-BF A60-O/P-BF A60-O/P-BF

25 25 25 25 25 25

50 50 50 50 50 50

35568 35569 35570 35571 35899 35572

7" CUT-OFF WHEELS

35561 35562 35563 35564 35565 35566

All Items – Same Day Shipping

57



UPC

PAGE #

31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 32 32 32 32 32 32 33 33 33 33

PAGE #

34101 . . . . . . . . . . . . . 34103 . . . . . . . . . . . . . 34107 . . . . . . . . . . . . . 34108 . . . . . . . . . . . . . 34113 . . . . . . . . . . . . . 34114 . . . . . . . . . . . . . 34115 . . . . . . . . . . . . . 34200 . . . . . . . . . . 15, 34201 . . . . . . . . . . 15, 34203 . . . . . . . . . . 15, 34204 . . . . . . . . . . 15, 34206 . . . . . . . . . . . . . 34207 . . . . . . . . . . . . . 34208 . . . . . . . . . . . . . 34209 . . . . . . . . . . . . . 34210 . . . . . . . . . . . . . 34212 . . . . . . . . . . . . . 34213 . . . . . . . . . . . . . 34214 . . . . . . . . . . . . . 34215 . . . . . . . . . . . . . 34217 . . . . . . . . . . . . . 34219 . . . . . . . . . . . . . 34220 . . . . . . . . . . . . . 34221 . . . . . . . . . . . . . 34222 . . . . . . . . . . . . . 34225 . . . . . . . . . . . . . 34226 . . . . . . . . . . . . . 34232 . . . . . . . . . . . . . 34234 . . . . . . . . . . . . . 34235 . . . . . . . . . . . . . 34236 . . . . . . . . . . . . . 34238 . . . . . . . . . . . . . 34239 . . . . . . . . . . . . . 34240 . . . . . . . . . . . . . 34241 . . . . . . . . . . . . . 34245 . . . . . . . . . . . . . 34301 . . . . . . . . . . . . . 34303 . . . . . . . . . . . . . 34308 . . . . . . . . . . . . . 34309 . . . . . . . . . . . . . 34310 . . . . . . . . . . . . . 34312 . . . . . . . . . . . . . 34313 . . . . . . . . . . . . . 34314 . . . . . . . . . . . . . 34315 . . . . . . . . . . . . . 34317 . . . . . . . . . . . . . 34318 . . . . . . . . . . . . . 34319 . . . . . . . . . . . . . 34320 . . . . . . . . . . . . . 34321 . . . . . . . . . . . . . 34323 . . . . . . . . . . . . . 34324 . . . . . . . . . . . . . 34325 . . . . . . . . . . . . . 34326 . . . . . . . . . . . . . 34327 . . . . . . . . . . . . . 34328 . . . . . . . . . . . . . 34329 . . . . . . . . . . . . . 34330 . . . . . . . . . . . . . 34331 . . . . . . . . . . . . . 34332 . . . . . . . . . . . . . 34333 . . . . . . . . . . . . . 34335 . . . . . . . . . . . . . 34336 . . . . . . . . . . . . . 34337 . . . . . . . . . . . . .

33 33 33 33 33 15 15 46 46 46 46 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 31 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

UPC

PAGE #

34338 . . . . . . . . . . . . . 34341 . . . . . . . . . . . . . 34342 . . . . . . . . . . . . . 34343 . . . . . . . . . . . . . 34344 . . . . . . . . . . . . . 34345 . . . . . . . . . . . . . 34348 . . . . . . . . . . . . . 34349 . . . . . . . . . . . . . 34350 . . . . . . . . . . . . . 34351 . . . . . . . . . . . . . 34352 . . . . . . . . . . . . . 34353 . . . . . . . . . . . . . 34354 . . . . . . . . . . . . . 34355 . . . . . . . . . . . . . 34356 . . . . . . . . . . . . . 34357 . . . . . . . . . . . . . 34358 . . . . . . . . . . . . . 34359 . . . . . . . . . . . . . 34360 . . . . . . . . . . . . . 34364 . . . . . . . . . . . . . 34366 . . . . . . . . . . . . . 34367 . . . . . . . . . . . . . 34369 . . . . . . . . . . . . . 34380 . . . . . . . . . . . . . 34383 . . . . . . . . . . . . . 34387 . . . . . . . . . . . . . 34389 . . . . . . . . . . . . . 34390 . . . . . . . . . . . . . 34391 . . . . . . . . . . . . . 34392 . . . . . . . . . . . . . 34394 . . . . . . . . . . . . . 34395 . . . . . . . . . . . . . 34396 . . . . . . . . . . . . . 34397 . . . . . . . . . . . . . 34409 . . . . . . . . . . . . . 34411 . . . . . . . . . . . . . 34412 . . . . . . . . . . . . . 34413 . . . . . . . . . . . . . 34414 . . . . . . . . . . . . . 34416 . . . . . . . . . . . . . 34418 . . . . . . . . . . . . . 34419 . . . . . . . . . . . . . 34421 . . . . . . . . . . . . . 34422 . . . . . . . . . . . . . 34425 . . . . . . . . . . . . . 34426 . . . . . . . . . . . . . 34427 . . . . . . . . . . . . . 34428 . . . . . . . . . . . . . 34429 . . . . . . . . . . . . . 34430 . . . . . . . . . . . . . 34432 . . . . . . . . . . . . . 34433 . . . . . . . . . . . . . 34434 . . . . . . . . . . . . . 34435 . . . . . . . . . . . . . 34436 . . . . . . . . . . . . . 34437 . . . . . . . . . . . . . 34438 . . . . . . . . . . . . . 34440 . . . . . . . . . . . . . 34443 . . . . . . . . . . . . . 34445 . . . . . . . . . . . . . 34447 . . . . . . . . . . . . . 34448 . . . . . . . . . . . . . 34449 . . . . . . . . . . . . . 34450 . . . . . . . . . . . . .

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19

UPC

PAGE #

34452 . . . . . . . . . . . . . 34453 . . . . . . . . . . . . . 34454 . . . . . . . . . . . . . 34456 . . . . . . . . . . . . . 34457 . . . . . . . . . . . . . 34458 . . . . . . . . . . . . . 34459 . . . . . . . . . . . . . 34460 . . . . . . . . . . . . . 34462 . . . . . . . . . . . . . 34464 . . . . . . . . . . . . . 34465 . . . . . . . . . . . . . 34466 . . . . . . . . . . . . . 34467 . . . . . . . . . . . . . 34469 . . . . . . . . . . . . . 34470 . . . . . . . . . . . . . 34471 . . . . . . . . . . . . . 34472 . . . . . . . . . . . . . 34473 . . . . . . . . . . . . . 34474 . . . . . . . . . . . . . 34480 . . . . . . . . . . . . . 34481 . . . . . . . . . . . . . 34482 . . . . . . . . . . . . . 34483 . . . . . . . . . . . . . 34486 . . . . . . . . . . . . . 34487 . . . . . . . . . . . . . 34488 . . . . . . . . . . . . . 34489 . . . . . . . . . . . . . 34490 . . . . . . . . . . . . . 34491 . . . . . . . . . . . . . 34493 . . . . . . . . . . . . . 34495 . . . . . . . . . . . . . 34496 . . . . . . . . . . . . . 34497 . . . . . . . . . . . . . 34500 . . . . . . . . . . . . . 34600 . . . . . . . . . . . . . 34603 . . . . . . . . . . . . . 34604 . . . . . . . . . . . . . 34605 . . . . . . . . . . . . . 34606 . . . . . . . . . . . . . 34607 . . . . . . . . . . . . . 34608 . . . . . . . . . . . . . 34609 . . . . . . . . . . . . . 34610 . . . . . . . . . . . . . 34611 . . . . . . . . . . . . . 34612 . . . . . . . . . . . . . 34613 . . . . . . . . . . . . . 34614 . . . . . . . . . . . . . 34615 . . . . . . . . . . . . . 34616 . . . . . . . . . . . . . 34617 . . . . . . . . . . . . . 34618 . . . . . . . . . . . . . 34619 . . . . . . . . . . . . . 34620 . . . . . . . . . . . . . 34621 . . . . . . . . . . . . . 34622 . . . . . . . . . . . . . 34623 . . . . . . . . . . . . . 34624 . . . . . . . . . . . . . 34625 . . . . . . . . . . . . . 34626 . . . . . . . . . . . . . 34627 . . . . . . . . . . . . . 34628 . . . . . . . . . . . . . 34629 . . . . . . . . . . . . . 34633 . . . . . . . . . . . . . 34634 . . . . . . . . . . . . .

All Items – Same Day Shipping

19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 24 24 24 24 24 24 24 24 24 27 27 27 24 24 24 24 24 24 24 24 24 24 24 24 24 27 27 27 21 21

Product Index

34003 . . . . . . . . . . . . . 34004 . . . . . . . . . . . . . 34006 . . . . . . . . . . . . . 34007 . . . . . . . . . . . . . 34009 . . . . . . . . . . . . . 34014 . . . . . . . . . . . . . 34015 . . . . . . . . . . . . . 34018 . . . . . . . . . . . . . 34021 . . . . . . . . . . . . . 34022 . . . . . . . . . . . . . 34023 . . . . . . . . . . . . . 34024 . . . . . . . . . . . . . 34025 . . . . . . . . . . . . . 34027 . . . . . . . . . . . . . 34028 . . . . . . . . . . . . . 34029 . . . . . . . . . . . . . 34030 . . . . . . . . . . . . . 34032 . . . . . . . . . . . . . 34033 . . . . . . . . . . . . . 34034 . . . . . . . . . . . . . 34035 . . . . . . . . . . . . . 34036 . . . . . . . . . . . . . 34037 . . . . . . . . . . . . . 34038 . . . . . . . . . . . . . 34039 . . . . . . . . . . . . . 34040 . . . . . . . . . . . . . 34041 . . . . . . . . . . . . . 34043 . . . . . . . . . . . . . 34044 . . . . . . . . . . . . . 34045 . . . . . . . . . . . . . 34046 . . . . . . . . . . . . . 34047 . . . . . . . . . . . . . 34048 . . . . . . . . . . . . . 34049 . . . . . . . . . . . . . 34051 . . . . . . . . . . . . . 34052 . . . . . . . . . . . . . 34053 . . . . . . . . . . . . . 34055 . . . . . . . . . . . . . 34057 . . . . . . . . . . . . . 34059 . . . . . . . . . . . . . 34060 . . . . . . . . . . . . . 34061 . . . . . . . . . . . . . 34063 . . . . . . . . . . . . . 34064 . . . . . . . . . . . . . 34065 . . . . . . . . . . . . . 34067 . . . . . . . . . . . . . 34069 . . . . . . . . . . . . . 34070 . . . . . . . . . . . . . 34071 . . . . . . . . . . . . . 34072 . . . . . . . . . . . . . 34073 . . . . . . . . . . . . . 34074 . . . . . . . . . . . . . 34075 . . . . . . . . . . . . . 34076 . . . . . . . . . . . . . 34077 . . . . . . . . . . . . . 34078 . . . . . . . . . . . . . 34079 . . . . . . . . . . . . . 34080 . . . . . . . . . . . . . 34081 . . . . . . . . . . . . . 34084 . . . . . . . . . . . . . 34094 . . . . . . . . . . . . . 34096 . . . . . . . . . . . . . 34097 . . . . . . . . . . . . . 34099 . . . . . . . . . . . . .

UPC

59


Product Index

UPC

60

PAGE #

34635 . . . . . . . . . . . . . 34636 . . . . . . . . . . . . . 34638 . . . . . . . . . . . . . 34640 . . . . . . . . . . . . . 34642 . . . . . . . . . . . . . 34644 . . . . . . . . . . . . . 34645 . . . . . . . . . . . . . 34646 . . . . . . . . . . . . . 34647 . . . . . . . . . . . . . 34648 . . . . . . . . . . . . . 34649 . . . . . . . . . . . . . 34650 . . . . . . . . . . . . . 34652 . . . . . . . . . . . . . 34653 . . . . . . . . . . . . . 34655 . . . . . . . . . . . . . 34656 . . . . . . . . . . . . . 34657 . . . . . . . . . . . . . 34663 . . . . . . . . . . . . . 34664 . . . . . . . . . . . . . 34669 . . . . . . . . . . . . . 34671 . . . . . . . . . . . . . 34672 . . . . . . . . . . . . . 34673 . . . . . . . . . . . . . 34674 . . . . . . . . . . . . . 34676 . . . . . . . . . . . . . 34677 . . . . . . . . . . . . . 34678 . . . . . . . . . . . . . 34679 . . . . . . . . . . . . . 34680 . . . . . . . . . . . . . 34681 . . . . . . . . . . . . . 34682 . . . . . . . . . . . . . 34683 . . . . . . . . . . . . . 34685 . . . . . . . . . . . . . 34688 . . . . . . . . . . . . . 34689 . . . . . . . . . . . . . 34690 . . . . . . . . . . . . . 34692 . . . . . . . . . . . . . 34695 . . . . . . . . . . . . . 34696 . . . . . . . . . . . . . 34697 . . . . . . . . . . . . . 34698 . . . . . . . . . . . . . 34700 . . . . . . . . . . . . . 34701 . . . . . . . . . . . . . 34702 . . . . . . . . . . . . . 34703 . . . . . . . . . . . . . 34705 . . . . . . . . . . . . . 34712 . . . . . . . . . . . . . 34719 . . . . . . . . . . . . . 34723 . . . . . . . . . . . . . 34724 . . . . . . . . . . . . . 34725 . . . . . . . . . . . . . 34729 . . . . . . . . . . . . . 34735 . . . . . . . . . . . . . 34742 . . . . . . . . . . . . . 34743 . . . . . . . . . . . . . 34744 . . . . . . . . . . . . . 34749 . . . . . . . . . . . . . 34752 . . . . . . . . . . . . . 34755 . . . . . . . . . . . . . 34759 . . . . . . . . . . . . . 34760 . . . . . . . . . . . . . 34761 . . . . . . . . . . . . . 34762 . . . . . . . . . . . . . 34763 . . . . . . . . . . . . .

21 24 24 24 24 27 27 27 24 24 24 24 24 24 27 27 27 24 24 27 24 24 24 24 24 24 24 24 27 27 27 24 24 24 24 24 27 25 25 25 25 25 25 25 27 27 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

UPC

PAGE #

34766 . . . . . . . . . . . . . 34769 . . . . . . . . . . . . . 34770 . . . . . . . . . . . . . 34771 . . . . . . . . . . . . . 34772 . . . . . . . . . . . . . 34774 . . . . . . . . . . . . . 34775 . . . . . . . . . . . . . 34776 . . . . . . . . . . . . . 34777 . . . . . . . . . . . . . 34778 . . . . . . . . . . . . . 34779 . . . . . . . . . . . . . 34781 . . . . . . . . . . . . . 34786 . . . . . . . . . . . . . 34790 . . . . . . . . . . . . . 34792 . . . . . . . . . . . . . 34793 . . . . . . . . . . . . . 34794 . . . . . . . . . . . . . 34795 . . . . . . . . . . . . . 34797 . . . . . . . . . . . . . 34798 . . . . . . . . . . . . . 34801 . . . . . . . . . . . . . 34802 . . . . . . . . . . . . . 34803 . . . . . . . . . . . . . 34808 . . . . . . . . . . . . . 34809 . . . . . . . . . . . . . 34811 . . . . . . . . . . . . . 34812 . . . . . . . . . . . . . 34813 . . . . . . . . . . . . . 34814 . . . . . . . . . . . . . 34816 . . . . . . . . . . . . . 34817 . . . . . . . . . . . . . 34900 . . . . . . . . . . . . . 34903 . . . . . . . . . . . . . 34904 . . . . . . . . . . . . . 34906 . . . . . . . . . . . . . 34907 . . . . . . . . . . . . . 34908 . . . . . . . . . . . . . 34909 . . . . . . . . . . . . . 34914 . . . . . . . . . . . . . 34915 . . . . . . . . . . . . . 34916 . . . . . . . . . . . . . 34917 . . . . . . . . . . . . . 34919 . . . . . . . . . . . . . 34920 . . . . . . . . . . . . . 34921 . . . . . . . . . . . . . 34923 . . . . . . . . . . . . . 34924 . . . . . . . . . . . . . 34929 . . . . . . . . . . . . . 34930 . . . . . . . . . . . . . 34933 . . . . . . . . . . . . . 34934 . . . . . . . . . . . . . 34936 . . . . . . . . . . . . . 34941 . . . . . . . . . . . . . 34942 . . . . . . . . . . . . . 34943 . . . . . . . . . . . . . 34944 . . . . . . . . . . . . . 34947 . . . . . . . . . . . . . 34948 . . . . . . . . . . . . . 34949 . . . . . . . . . . . . . 34950 . . . . . . . . . . . . . 34951 . . . . . . . . . . . . . 34952 . . . . . . . . . . . . . 35005 . . . . . . . . . . . . . 35006 . . . . . . . . . . . . .

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 49 49

UPC

PAGE #

35007 . . . . . . . . . . . . . 35008 . . . . . . . . . . . . . 35009 . . . . . . . . . . . . . 35010 . . . . . . . . . . . . . 35011 . . . . . . . . . . . . . 35012 . . . . . . . . . . . . . 35013 . . . . . . . . . . . . . 35014 . . . . . . . . . . . . . 35015 . . . . . . . . . . . . . 35017 . . . . . . . . . . . . . 35018 . . . . . . . . . . . . . 35019 . . . . . . . . . . . . . 35020 . . . . . . . . . . . . . 35021 . . . . . . . . . . . . . 35022 . . . . . . . . . . . . . 35023 . . . . . . . . . . . . . 35024 . . . . . . . . . . . . . 35031 . . . . . . . . . . . . . 35032 . . . . . . . . . . . . . 35033 . . . . . . . . . . . . . 35034 . . . . . . . . . . . . . 35035 . . . . . . . . . . . . . 35036 . . . . . . . . . . . . . 35037 . . . . . . . . . . . . . 35038 . . . . . . . . . . . . . 35039 . . . . . . . . . . . . . 35040 . . . . . . . . . . . . . 35041 . . . . . . . . . . . . . 35044 . . . . . . . . . . . . . 35046 . . . . . . . . . . . . . 35047 . . . . . . . . . . . . . 35048 . . . . . . . . . . . . . 35049 . . . . . . . . . . . . . 35050 . . . . . . . . . . . . . 35051 . . . . . . . . . . . . . 35052 . . . . . . . . . . . . . 35053 . . . . . . . . . . . . . 35064 . . . . . . . . . . . . . 35073 . . . . . . . . . . . . . 35074 . . . . . . . . . . . . . 35107 . . . . . . . . . . . . . 35108 . . . . . . . . . . . . . 35109 . . . . . . . . . . . . . 35110 . . . . . . . . . . . . . 35112 . . . . . . . . . . . . . 35113 . . . . . . . . . . . . . 35114 . . . . . . . . . . . . . 35200 . . . . . . . . . . . . . 35201 . . . . . . . . . . . . . 35202 . . . . . . . . . . . . . 35203 . . . . . . . . . . . . . 35204 . . . . . . . . . . . . . 35205 . . . . . . . . . . . . . 35207 . . . . . . . . . . . . . 35208 . . . . . . . . . . . . . 35209 . . . . . . . . . . . . . 35210 . . . . . . . . . . . . . 35211 . . . . . . . . . . . . . 35212 . . . . . . . . . . . . . 35213 . . . . . . . . . . . . . 35214 . . . . . . . . . . . . . 35215 . . . . . . . . . . . . . 35216 . . . . . . . . . . . . . 35217 . . . . . . . . . . . . .

All Items – Same Day Shipping

49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 52 52 52 52 52 52 52 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38

UPC

PAGE #

35218 . . . . . . . . . . . . . 35219 . . . . . . . . . . . . . 35221 . . . . . . . . . . . . . 35222 . . . . . . . . . . . . . 35223 . . . . . . . . . . . . . 35224 . . . . . . . . . . . . . 35225 . . . . . . . . . . . . . 35229 . . . . . . . . . . . . . 35230 . . . . . . . . . . . . . 35232 . . . . . . . . . . . . . 35233 . . . . . . . . . . . . . 35234 . . . . . . . . . . . . . 35235 . . . . . . . . . . . . . 35236 . . . . . . . . . . . . . 35237 . . . . . . . . . . . . . 35238 . . . . . . . . . . . . . 35239 . . . . . . . . . . 38, 35240 . . . . . . . . . . 38, 35241 . . . . . . . . . . . . . 35242 . . . . . . . . . . . . . 35243 . . . . . . . . . . . . . 35244 . . . . . . . . . . . . . 35245 . . . . . . . . . . . . . 35246 . . . . . . . . . . . . . 35247 . . . . . . . . . . . . . 35248 . . . . . . . . . . 38, 35249 . . . . . . . . . . 38, 35251 . . . . . . . . . . . . . 35254 . . . . . . . . . . . . . 35255 . . . . . . . . . . . . . 35260 . . . . . . . . . . . . . 35261 . . . . . . . . . . 39, 35266 . . . . . . . . . . . . . 35267 . . . . . . . . . . . . . 35268 . . . . . . . . . . . . . 35270 . . . . . . . . . . . . . 35272 . . . . . . . . . . . . . 35273 . . . . . . . . . . . . . 35274 . . . . . . . . . . 39, 35277 . . . . . . . . . . . . . 35278 . . . . . . . . . . . . . 35279 . . . . . . . . . . . . . 35280 . . . . . . . . . . . . . 35281 . . . . . . . . . . . . . 35282 . . . . . . . . . . . . . 35283 . . . . . . . . . . . . . 35284 . . . . . . . . . . . . . 35285 . . . . . . . . . . . . . 35286 . . . . . . . . . . . . . 35287 . . . . . . . . . . . . . 35288 . . . . . . . . . . 39, 35289 . . . . . . . . . . 39, 35290 . . . . . . . . . . 39, 35291 . . . . . . . . . . 39, 35292 . . . . . . . . . . . . . 35293 . . . . . . . . . . . . . 35294 . . . . . . . . . . . . . 35295 . . . . . . . . . . . . . 35296 . . . . . . . . . . . . . 35297 . . . . . . . . . . . . . 35298 . . . . . . . . . . . . . 35299 . . . . . . . . . . . . . 35300 . . . . . . . . . . . . . 35301 . . . . . . . . . . . . .

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 41 41 38 38 38 38 38 38 38 41 41 38 39 39 39 41 39 39 39 39 39 39 41 39 39 39 39 39 39 39 39 39 39 39 41 41 41 41 39 39 39 39 39 39 39 39 39 39


UPC

PAGE #

PAGE #

35512 . . . . . . . . . . . . . 35521 . . . . . . . . . . . . . 35523 . . . . . . . . . . . . . 35524 . . . . . . . . . . . . . 35529 . . . . . . . . . . . . . 35530 . . . . . . . . . . . . . 35532 . . . . . . . . . . . . . 35535 . . . . . . . . . . . . . 35539 . . . . . . . . . . . . . 35542 . . . . . . . . . . . . . 35545 . . . . . . . . . . . . . 35547 . . . . . . . . . . . . . 35550 . . . . . . . . . . . . . 35551 . . . . . . . . . . . . . 35555 . . . . . . . . . . . . . 35558 . . . . . . . . . . . . . 35559 . . . . . . . . . . . . . 35560 . . . . . . . . . . . . . 35561 . . . . . . . . . . . . . 35562 . . . . . . . . . . . . . 35563 . . . . . . . . . . . . . 35564 . . . . . . . . . . . . . 35565 . . . . . . . . . . . . . 35566 . . . . . . . . . . . . . 35568 . . . . . . . . . . . . . 35569 . . . . . . . . . . . . . 35570 . . . . . . . . . . . . . 35571 . . . . . . . . . . . . . 35572 . . . . . . . . . . . . . 35687 . . . . . . . . . . . . . 35688 . . . . . . . . . . . . . 35689 . . . . . . . . . . . . . 35690 . . . . . . . . . . . . . 35691 . . . . . . . . . . . . . 35899 . . . . . . . . . . . . . 35900 . . . . . . . . . . . . . 35901 . . . . . . . . . . . . . 35902 . . . . . . . . . . . . . 35906 . . . . . . . . . . . . . 35907 . . . . . . . . . . . . . 35908 . . . . . . . . . . . . . 35909 . . . . . . . . . . . . . 35951 . . . . . . . . . . . . . 35953 . . . . . . . . . . . . . 35954 . . . . . . . . . . . . . 35955 . . . . . . . . . . . . . 35957 . . . . . . . . . . . . . 35975 . . . . . . . . . . . . . 35980 . . . . . . . . . . . . . 35985 . . . . . . . . . . . . . 36009 . . . . . . . . . . . . . 36042 . . . . . . . . . . . . . 36058 . . . . . . . . . . . . . 36060 . . . . . . . . . . . . . 36067 . . . . . . . . . . . . . 37700 . . . . . . . . . . . . . 37701 . . . . . . . . . . . . . 37702 . . . . . . . . . . . . . 37703 . . . . . . . . . . . . . 37704 . . . . . . . . . . . . . 37705 . . . . . . . . . . . . . 37706 . . . . . . . . . . . . . 37707 . . . . . . . . . . . . . 37708 . . . . . . . . . . . . .

56 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 56 56 56 56 56 57 54 54 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 17 17 17 17 17 17 17 17 17

UPC

PAGE #

37709 . . . . . . . . . . . . . 37710 . . . . . . . . . . . . . 37711 . . . . . . . . . . . . . 37712 . . . . . . . . . . . . . 37713 . . . . . . . . . . . . . 37714 . . . . . . . . . . . . . 37715 . . . . . . . . . . . . . 37716 . . . . . . . . . . . . . 37717 . . . . . . . . . . . . . 37718 . . . . . . . . . . . . . 37719 . . . . . . . . . . . . . 37720 . . . . . . . . . . . . . 37721 . . . . . . . . . . . . . 37722 . . . . . . . . . . . . . 37723 . . . . . . . . . . . . . 37724 . . . . . . . . . . . . . 37725 . . . . . . . . . . . . . 37726 . . . . . . . . . . . . . 37727 . . . . . . . . . . . . . 37728 . . . . . . . . . . . . . 37729 . . . . . . . . . . . . . 37730 . . . . . . . . . . . . . 37731 . . . . . . . . . . . . . 37732 . . . . . . . . . . . . . 37733 . . . . . . . . . . . . . 37734 . . . . . . . . . . . . . 37735 . . . . . . . . . . . . . 37736 . . . . . . . . . . . . . 37737 . . . . . . . . . . . . . 37738 . . . . . . . . . . . . . 37739 . . . . . . . . . . . . . 37740 . . . . . . . . . . . . . 37741 . . . . . . . . . . . . . 37742 . . . . . . . . . . . . . 37743 . . . . . . . . . . . . . 37744 . . . . . . . . . . . . . 37745 . . . . . . . . . . . . . 37746 . . . . . . . . . . . . . 37747 . . . . . . . . . . . . . 37748 . . . . . . . . . . . . . 37749 . . . . . . . . . . . . . 37750 . . . . . . . . . . . . . 37751 . . . . . . . . . . . . . 37752 . . . . . . . . . . . . . 37753 . . . . . . . . . . . . . 38001 . . . . . . . . . . . . . 38003 . . . . . . . . . . . . . 38004 . . . . . . . . . . . . . 38005 . . . . . . . . . . . . . 38006 . . . . . . . . . . . . . 38007 . . . . . . . . . . . . . 38008 . . . . . . . . . . . . . 38009 . . . . . . . . . . . . . 38010 . . . . . . . . . . . . . 38011 . . . . . . . . . . . . . 38012 . . . . . . . . . . . . . 38013 . . . . . . . . . . . . . 38014 . . . . . . . . . . . . . 38015 . . . . . . . . . . . . . 38016 . . . . . . . . . . . . . 38017 . . . . . . . . . . . . . 38018 . . . . . . . . . . . . . 38019 . . . . . . . . . . . . . 38020 . . . . . . . . . . . . .

17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

UPC

PAGE #

38021 . . . . . . . . . . . . . 38022 . . . . . . . . . . . . . 38023 . . . . . . . . . . . . . 38024 . . . . . . . . . . . . . 38025 . . . . . . . . . . . . . 38026 . . . . . . . . . . . . . 38027 . . . . . . . . . . . . . 38028 . . . . . . . . . . . . . 38029 . . . . . . . . . . . . . 38030 . . . . . . . . . . . . . 38031 . . . . . . . . . . . . . 38032 . . . . . . . . . . . . . 38033 . . . . . . . . . . . . . 38034 . . . . . . . . . . . . . 38035 . . . . . . . . . . . . . 38036 . . . . . . . . . . . . . 38038 . . . . . . . . . . . . . 38039 . . . . . . . . . . . . . 38041 . . . . . . . . . . . . . 38042 . . . . . . . . . . . . . 38043 . . . . . . . . . . . . . 38044 . . . . . . . . . . . . . 38046 . . . . . . . . . . . . . 38047 . . . . . . . . . . . . . 38048 . . . . . . . . . . . . . 38049 . . . . . . . . . . . . . 38050 . . . . . . . . . . . . . 38051 . . . . . . . . . . . . . 38052 . . . . . . . . . . . . . 38053 . . . . . . . . . . . . . 38054 . . . . . . . . . . . . . 38055 . . . . . . . . . . . . . 38111 . . . . . . . . . . . . . 38113 . . . . . . . . . . . . . 38114 . . . . . . . . . . . . . 38116 . . . . . . . . . . . . . 38121 . . . . . . . . . . . . . 38123 . . . . . . . . . . . . . 38126 . . . . . . . . . . . . . 38161 . . . . . . . . . . . . . 38163 . . . . . . . . . . . . . 38164 . . . . . . . . . . . . . 38166 . . . . . . . . . . . . . 38201 . . . . . . . . . . . . . 38203 . . . . . . . . . . . . . 38204 . . . . . . . . . . . . . 38206 . . . . . . . . . . . . . 38501 . . . . . . . . . . . . . 38502 . . . . . . . . . . . . . 38503 . . . . . . . . . . . . . 38504 . . . . . . . . . . . . . 38505 . . . . . . . . . . . . . 38506 . . . . . . . . . . . . . 38507 . . . . . . . . . . . . . 38508 . . . . . . . . . . . . . 38509 . . . . . . . . . . . . . 38510 . . . . . . . . . . . . . 38511 . . . . . . . . . . . . . 38512 . . . . . . . . . . . . . 38513 . . . . . . . . . . . . . 38514 . . . . . . . . . . . . . 38515 . . . . . . . . . . . . . 38516 . . . . . . . . . . . . . 38517 . . . . . . . . . . . . .

All Items – Same Day Shipping

51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 50 50 50 50 50 50 50 50 50 50 50 51 51 51 51 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 51 51

Product Index

35302 . . . . . . . . . . 39, 41 35303 . . . . . . . . . . 39, 41 35304 . . . . . . . . . . 39, 41 35306 . . . . . . . . . . . . . 39 35308 . . . . . . . . . . 39, 41 35309 . . . . . . . . . . . . . 39 35314 . . . . . . . . . . . . . 39 35315 . . . . . . . . . . . . . 39 35316 . . . . . . . . . . . . . 39 35318 . . . . . . . . . . . . . 39 35319 . . . . . . . . . . . . . 39 35321 . . . . . . . . . . . . . 39 35324 . . . . . . . . . . . . . 40 35327 . . . . . . . . . . . . . 40 35329 . . . . . . . . . . . . . 40 35333 . . . . . . . . . . . . . 40 35334 . . . . . . . . . . . . . 40 35337 . . . . . . . . . . . . . 40 35338 . . . . . . . . . . . . . 40 35339 . . . . . . . . . . . . . 40 35342 . . . . . . . . . . . . . 40 35343 . . . . . . . . . . . . . 40 35344 . . . . . . . . . . . . . 40 35345 . . . . . . . . . . . . . 40 35347 . . . . . . . . . . . . . 40 35348 . . . . . . . . . . . . . 40 35349 . . . . . . . . . . . . . 40 35350 . . . . . . . . . . . . . 40 35352 . . . . . . . . . . . . . 40 35353 . . . . . . . . . . . . . 40 35354 . . . . . . . . . . . . . 40 35355 . . . . . . . . . . . . . 40 35356 . . . . . . . . . . . . . 40 35358 . . . . . . . . . . . . . 40 35360 . . . . . . . . . . . . . 40 35361 . . . . . . . . . . .40,41 35362 . . . . . . . . . . .40,41 35363 . . . . . . . . . . . . . 40 35364 . . . . . . . . . . . . . 40 35365 . . . . . . . . . . . . . 40 35368 . . . . . . . . . . . . . 40 35369 . . . . . . . . . . . . . 40 35370 . . . . . . . . . . . . . 40 35371 . . . . . . . . . . .40,41 35372 . . . . . . . . . . .40,41 35373 . . . . . . . . . . . . . 41 35374 . . . . . . . . . . . . . 41 35375 . . . . . . . . . . . . . 41 35376 . . . . . . . . . . . . . 41 35377 . . . . . . . . . . . . . 41 35384 . . . . . . . . . . 38, 41 35390 . . . . . . . . . . 39, 41 35500 . . . . . . . . . . . . . 56 35501 . . . . . . . . . . . . . 56 35502 . . . . . . . . . . . . . 56 35503 . . . . . . . . . . . . . 56 35504 . . . . . . . . . . . . . 56 35505 . . . . . . . . . . . . . 56 35506 . . . . . . . . . . . . . 56 35507 . . . . . . . . . . . . . 56 35508 . . . . . . . . . . . . . 56 35509 . . . . . . . . . . . . . 56 35510 . . . . . . . . . . . . . 56 35511 . . . . . . . . . . . . . 56

UPC

61


Product Index

UPC

62

PAGE #

38518 . . . . . . . . . . . . . 38519 . . . . . . . . . . . . . 38520 . . . . . . . . . . . . . 38521 . . . . . . . . . . . . . 38522 . . . . . . . . . . . . . 38523 . . . . . . . . . . . . . 38524 . . . . . . . . . . . . . 38525 . . . . . . . . . . . . . 38528 . . . . . . . . . . . . . 38529 . . . . . . . . . . . . . 38531 . . . . . . . . . . . . . 38532 . . . . . . . . . . . . . 38533 . . . . . . . . . . . . . 38534 . . . . . . . . . . . . . 38535 . . . . . . . . . . . . . 38561 . . . . . . . . . . . . . 38562 . . . . . . . . . . . . . 38613 . . . . . . . . . . . . . 38616 . . . . . . . . . . . . . 38623 . . . . . . . . . . . . . 38626 . . . . . . . . . . . . . 38663 . . . . . . . . . . . . . 38666 . . . . . . . . . . . . . 38703 . . . . . . . . . . . . . 38706 . . . . . . . . . . . . . 45066 . . . . . . . . . . . . . 45085 . . . . . . . . . . . . . 45086 . . . . . . . . . . . . . 45087 . . . . . . . . . . . . . 45088 . . . . . . . . . . . . . 49000 . . . . . . . . . . . . . 49001 . . . . . . . . . . . . . 49002 . . . . . . . . . . . . . 49003 . . . . . . . . . . . . . 49004 . . . . . . . . . . . . . 49005 . . . . . . . . . . . . . 49006 . . . . . . . . . . . . . 49007 . . . . . . . . . . . . . 49008 . . . . . . . . . . . . . 49009 . . . . . . . . . . . . . 49010 . . . . . . . . . . . . . 49011 . . . . . . . . . . . . . 49012 . . . . . . . . . . . . . 49013 . . . . . . . . . . . . . 49014 . . . . . . . . . . . . . 49015 . . . . . . . . . . . . . 49016 . . . . . . . . . . . . . 49017 . . . . . . . . . . . . . 49018 . . . . . . . . . . . . . 49019 . . . . . . . . . . . . . 49021 . . . . . . . . . . . . . 49022 . . . . . . . . . . . . . 49023 . . . . . . . . . . . . . 49024 . . . . . . . . . . . . . 49026 . . . . . . . . . . . . . 49027 . . . . . . . . . . . . . 49028 . . . . . . . . . . . . . 49029 . . . . . . . . . . . . . 49030 . . . . . . . . . . . . . 49031 . . . . . . . . . . . . . 49032 . . . . . . . . . . . . . 49033 . . . . . . . . . . . . . 49035 . . . . . . . . . . . . . 49036 . . . . . . . . . . . . .

51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 50 50 50 50 50 50 50 50 51 51 56 56 56 56 56 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54

UPC

PAGE #

49037 . . . . . . . . . . . . . 49038 . . . . . . . . . . . . . 49039 . . . . . . . . . . . . . 49040 . . . . . . . . . . . . . 49042 . . . . . . . . . . . . . 49043 . . . . . . . . . . . . . 51000 . . . . . . . . . . . . . 51001 . . . . . . . . . . . . . 51002 . . . . . . . . . . . . . 51003 . . . . . . . . . . . . . 51004 . . . . . . . . . . . . . 51005 . . . . . . . . . . . . . 51006 . . . . . . . . . . . . . 51007 . . . . . . . . . . . . . 51008 . . . . . . . . . . . . . 58000 . . . . . . . . . . . . . 58001 . . . . . . . . . . . . . 58002 . . . . . . . . . . . . . 58003 . . . . . . . . . . . . . 58004 . . . . . . . . . . . . . 58005 . . . . . . . . . . . . . 58006 . . . . . . . . . . . . . 58007 . . . . . . . . . . . . . 58008 . . . . . . . . . . . . . 58009 . . . . . . . . . . . . . 58010 . . . . . . . . . . . . . 58011 . . . . . . . . . . . . . 58012 . . . . . . . . . . . . . 58013 . . . . . . . . . . . . . 58014 . . . . . . . . . . . . . 58015 . . . . . . . . . . . . . 58016 . . . . . . . . . . . . . 58017 . . . . . . . . . . . . . 58018 . . . . . . . . . . . . . 58019 . . . . . . . . . . . . . 58020 . . . . . . . . . . . . . 58021 . . . . . . . . . . . . . 58022 . . . . . . . . . . . . . 58023 . . . . . . . . . . . . . 58024 . . . . . . . . . . . . . 58025 . . . . . . . . . . . . . 58026 . . . . . . . . . . . . . 58027 . . . . . . . . . . . . . 58028 . . . . . . . . . . . . . 58029 . . . . . . . . . . . . . 58030 . . . . . . . . . . . . . 58031 . . . . . . . . . . . . . 58032 . . . . . . . . . . . . . 58033 . . . . . . . . . . . . . 58034 . . . . . . . . . . . . . 58035 . . . . . . . . . . . . . 58036 . . . . . . . . . . . . . 58037 . . . . . . . . . . . . . 58038 . . . . . . . . . . . . . 58039 . . . . . . . . . . . . . 58040 . . . . . . . . . . . . . 58041 . . . . . . . . . . . . . 58042 . . . . . . . . . . . . . 58043 . . . . . . . . . . . . . 58044 . . . . . . . . . . . . . 58045 . . . . . . . . . . . . . 58046 . . . . . . . . . . . . . 58047 . . . . . . . . . . . . . 58048 . . . . . . . . . . . . .

54 54 54 54 54 54 52 52 52 52 52 52 52 52 52 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23

UPC

PAGE #

58049 . . . . . . . . . . . . . 58050 . . . . . . . . . . . . . 58054 . . . . . . . . . . 22, 58055 . . . . . . . . . . 22, 58056 . . . . . . . . . . 22, 58057 . . . . . . . . . . 22, 58058 . . . . . . . . . . 22, 58059 . . . . . . . . . . 22, 58060 . . . . . . . . . . 22, 59000 . . . . . . . . . . . . . 59001 . . . . . . . . . . . . . 59002 . . . . . . . . . . . . . 59003 . . . . . . . . . . . . . 59004 . . . . . . . . . . . . . 59005 . . . . . . . . . . . . . 59006 . . . . . . . . . . . . . 59007 . . . . . . . . . . . . . 59008 . . . . . . . . . . . . . 59009 . . . . . . . . . . . . . 59010 . . . . . . . . . . . . . 59011 . . . . . . . . . . . . . 59012 . . . . . . . . . . . . . 59013 . . . . . . . . . . . . . 59014 . . . . . . . . . . . . . 59015 . . . . . . . . . . . . . 59016 . . . . . . . . . . . . . 59017 . . . . . . . . . . . . . 59018 . . . . . . . . . . . . . 59019 . . . . . . . . . . . . . 59020 . . . . . . . . . . . . . 59021 . . . . . . . . . . . . . 59022 . . . . . . . . . . . . . 59023 . . . . . . . . . . . . . 59024 . . . . . . . . . . . . . 59025 . . . . . . . . . . . . . 59050 . . . . . . . . . . . . . 59051 . . . . . . . . . . . . . 59052 . . . . . . . . . . . . . 59053 . . . . . . . . . . . . . 59054 . . . . . . . . . . . . . 59055 . . . . . . . . . . . . . 59056 . . . . . . . . . . . . . 59057 . . . . . . . . . . . . . 59102 . . . . . . . . . . . . . 59103 . . . . . . . . . . . . . 59104 . . . . . . . . . . . . . 59105 . . . . . . . . . . . . . 59106 . . . . . . . . . . . . . 59107 . . . . . . . . . . . . . 59108 . . . . . . . . . . . . .

All Items – Same Day Shipping

23 23 46 46 46 46 46 46 46 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 16 16 16 16 16 16 16 16 56 56 56 56 56 56 56


Surface Grinding Wheel Safety Ring Test

• Always perform a ring test on a grinding wheel before mounting it. The ring test will locate an invisible crack.

CGW - CAMEL GRINDING WHEELS

• If the wheel is cracked the ring will be dull. DO NOT USE DAMAGED WHEELS.

45°

45°

45°

45°

Striking Points

Warning! Grinding Wheels Improperly Used Are Dangerous

Grinding is a safe operation if the few basic rules listed below are followed. These rules are based on material contained in the ANSI B7.1 Safety Requirements for “Use, Care and Protection of Abrasive Wheels.” For your safety, we suggest you benefit from the experience of others and carefully follow these rules.

Surface Grinding Wheel Safety

• If a sharp distinct ring is heard the wheel is safe.

Safe Operating Instructions

ALWAYS USE A GUARD WEAR EYE PROTECTION CGW, Camel Grinding Wheels plant in Kibbutz Sarid, Israel

CGW-Camel Grinding Wheels is one of the world’s leading suppliers of grinding wheels since 1956. Providing superior quality products and service at competitive prices has led to our rapid world wide growth. We invite you to contact us. You’ll immediately realize the advantages CGW offers: • Shipments within 24 hours on all catalog items • The largest vitrified grinding wheel inventory in the industry • Exceptional efforts to meet all your special application needs In addition, our quality control procedures comply with oSa and the requirements of ISO 9001. These are just some of the reasons that, “There’s more to our wheels than just the wheel.”

oSa – The Missing Element for Safety CGW-Camel Grinding Wheels, is a proud member of the international organization oSa (www.osa-abrasives.org). oSa – the Organization for the Safety of Abrasives – is a society formed by leading international abrasive manufacturers to ensure the quality of their products is consistently high and adheres to standards to minimize risks to product users. In the year 2000, a collective of European abrasive manufacturers recognized the need for global abrasive safety requirements and created oSa. oSa members voluntarily agree to manufacture market safe and accident-preventing quality abrasives in accordance with European safety standards and oSa testing regulations. oSa member products are monitored for conformity with the most up-to-date standards and provisions. Products marked with the oSa logo reflect high-grade production and high safety test standards. As a member of oSa, CGW excels at minimizing the potential for risk by controlled production, adherence to and implementation of quality assurance measures and thorough in-company production. When purchasing bonded abrasive products, insist the manufacturer is an official oSa member for quality, safe products.

COMPLY WITH ANSI CODE B7.1 AND OSHA REGULATIONS DO NOT EXCEED MAXIMUM SAFE SPEED MARKED ON WHEEL 1. DO always HANDLE AND STORE wheels in a CAREFUL manner.

1. DON’T use a cracked wheel or one that HAS BEEN DROPPED or has become damaged.

2. DO VISUALLY INSPECT and ring test all wheels before mounting for possible damage.

2. DON’T FORCE a wheel onto the machine OR ALTER the size of the mounting hole–if wheel won’t fit the machine, get one that will.

3. DO CHECK MACHINE SPEED against the established maximum safe operating speed marked on the wheel. 4. DO CHECK MOUNTING FLANGES for equal and correct diameter. 5. DO USE MOUNTING BLOTTERS when supplied with wheels.

3. DON’T ever EXCEED MAXIMUM OPERATING SPEED established for the wheel. 4. DON’T use mounting flanges on which the bearing surfaces ARE NOT CLEAN, FLAT AND FREE OF BURRS.

6. DO be sure WORK REST is properly adjusted. (Center of wheel or above; no more than 1/8" away from wheel.)

5. DON’T OVERTIGHTEN the mounting nut EXCESSIVELY.

7. DO always USA A SAFETY GUARD covering at least one-half of the grinding wheel.

7. DON’T start the machine until the WHEEL GUARD IS IN PLACE.

8. DO allow NEWLY MOUNTED WHEELS to run at operating speed, with a guard in place, for at least one minute before grinding.

8. DON’T JAM work into the wheel.

9. DO always WEAR SAFETY GLASSES or some type of eye protection when grinding.

10. DON’T FORCE GRINDING so that motor slows noticeably or work gets hot.

6. DON’T grind the SIDE OF THE WHEEL (see Safety Code for B7.1 for exception).

9. DON’T STAND DIRECTLY IN FRONT of a grinding wheel whenever a grinder is started.

10. DO TURN OFF COOLANT before stopping wheel to avoid creating an out-of-balance condition.

All Items – Same Day Shipping

All Items – Same Day Shipping

63


Industrial Products Catalog - December 2006

7525 North Oak Park Ave., Niles, IL 60714 Ph: 800-447-4248 • Fax: 800-447-3731 http://www.cgwheels.com ©2006 CGW-Camel Grinding Wheels, USA

#99001


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.