General Catalogue 2007
Pliers ABC
TIP: page 2 with symbols and cutting capacities. Open out the flap when working with the cataloque
Technical Basics
Cutting Pliers for cutting or nipping (Diagonal, Center and End Cutters, Carpenters’ Pincers, etc.)
Gripping Pliers (Flat, Long-Nose and Water Pump Pliers, etc.)
Combined Pliers which can be used for both cutting and for gripping (Combination Pliers, Stork Beak and Radio Pliers, etc.)
Special Pliers for special applications, such as for notching or punching different types of material (Sheet Metal Nibbler, Tile Nibbling Pincer, etc.)
Plier Head Parts (DIN ISO 5742)
Rivet Designs
Types of Joints
point
The pliers joint is formed in a number of different ways:
Different types of joint design include:
Forged-on joint axis: The rivet is part of one handle of the pliers (forged out of just one piece) - high level of stability for heaviest duty - long service life
Lay-on joint: The two halves of the pliers are placed on top of each other but not milled out.
gripping surface recess (pipe grip) jaw flank side cutter
Basic shapes of jaws
Joint with inserted rivet: A proved, sturdy and precise rivet connection for all standard pliers
Single joint: Half thickness of each pliers handle is milled away in the joint area so that both handles can be laid into each other.
flat jaws
half-round jaws
round jaws
Screwed joint: for particularly demanding requirements in terms of precision and smooth operation, e.g. in circlip pliers and cable cutters (even the finest multistranded conductors have to be cut cleanly)
Box joint: One handle of the pliers is slit. The other handle is pushed through this slit. This joint design can withstand a high level of load and strain because the joint bolt is supported on both sides and the pushed through handle has two side ways bearings.
The maximum values indicated always stay for the performance limit under the most favourable cutting conditions, when the wire is placed as near as possible to the joint.
Cutting Capacities Table Cutting Capacity Article-No. Length
61 01 62 12 64 0. 64 11 64 12 64 22 64 32 64 42 64 52 64 62 64 72 67 0.
68 01
69 0. 70 . .
71 . . 74 0.
74 91
200 120 115 115 115 115 120 115 115 120 120 140 160 200 160 180 200 130 110 125 140 160 180 200 140 160 180 200 250 250
9 9 Ø mm 1.0 - 6.0 0.3 - 1.0 2.0 1.4 2.0 0.8 1.5 1.5 1.3 0.6 1.5 4.0 4.0 4.0 4.0 4.0 4.0 0.4 - 2.0 3.0 3.0 4.0 4.0 4.0 6.0
5.0
9 Ø mm 9
Cutting Capacity
9 9 Ø mm
9 9 Ø mm
3.5
3.0
4.0 0.7 1.0 0.8 0.8
0.6 – 0.5
1.0 1.0
0.5 0.5
3.1 3.4 4.2 2.8 3.2 3.5 1.3 2.0 2.3 2.5 2.8 3.0 5.2 3.1 3.4 3.8 4.2 4.6 5.0
2.0 2.5 3.0 2.3 2.5 2.8 1.0 1.2 1.5 1.8 2.0 2.5 4.0 2.0 2.5 2.7 3.0 3.5 3.8
Page
1.5 2.0 2.5
0.75
3.6 1.5 2.0 2.2 2.5 3.0 3.5
57 57 58 58 58 58 58 58 58 58 58 59 59 59 60 60 60 60 61 61 61 61 61 62 64 64 64 64 64 63
Article-No.
9
Length 9 Ø mm 75 02 125 0.2 - 1.3 75 12 125 0.2 - 1.3 75 22 125 0.2 - 1.3 75 32 125 0.2 - 1.3 75 52 125 0.2 - 1.0 76 01 125 0.4 - 2.5 76 22 125 0.4 - 2.5 76 81 125 0.4 - 1.3 77 01/02 115 0.3 - 1.6 130 0.3 - 2.0 77 21 115 0.3 - 1.3 130 0.3 - 1.6 77 22 115 0.3 - 1.3 130 0.3 - 2.0 77 32 115 0.3 - 1.3 77 42 115 0.3 - 1.3 130 0.3 - 1.6 77 52 115 0.3 - 1.0 77 72 115 0.3 - 0.8 78 03/13 125 0.2 - 1.6 78 23 125 0.2 - 1.0 78 31/41 125 0.2 - 1.0 78 61/71 125 0.2 - 1.6 78 81/91 125 0.2 - 1.6 79 02 120 0.2 - 1.0 79 02 125 0.2 - 1.5 79 22 120 0.1 - 0.8 79 22 125 0.1 - 1.2 79 32/52 125 0.2 - 1.3 79 42/62 125 0.1 - 1.0
9 Ø mm 9
9 9 Ø mm
9 9 Ø mm
1.0 1.0 1.0 1.0 0.6 1.8
0.6 0.6 0.4 0.4 0.5 1.0
0.4 0.4 0.4 0.4 0.3 0.6
1.0 1.2 1.5 1.0 1.3 1.0 1.5 1.2 1.0 1.3 0.8
0.6 0.5 0.8
Page
0.5 0.5
0.5
1.0 0.6 1.2 1.2 0.55 0.8 0.4 0.65 0.7 0.55
0.6 0.3 0.5
0.4
65 65 65 65 65 65 65 65 66 66 66 66 66 66 66 66 66 66 66 68 68 68 68 68 70 70 70 70 70 70
Symbols
ESD
ESD electrostatic discharge, dissipative
opening spring
flat jaws
copper + aluminium cable single-strand and multiple conductor
wire clamp
half-round jaws
copper + aluminium cable single conductor fine-stranded
center cutter
round jaws
copper + aluminium cable single conductor solid
cutting edge with bevel
gripping surfaces smooth
iron
cutting edge with small bevel
gripping surfaces serrated
ribbon cable
Electronics
KNIPEX high leverage tools jaws angled
wire rope
soft wire box joint
cutting edge with very small bevel cutting edge without bevel for flush cut
gripping surfaces crosswise serrated
medium hard wire hard wire piano wire
Cutting edges Technical Basics Direction and Position of the Cutting edges
Cutting edge shapes DIN ISO 5742
End Cutters
with bevel (outside bevel)
Oblique Cutters
with small bevel (outside bevel)
with very small bevel (outside bevel)
Diagonal Cutters
without bevel (outside bevel)
Center Cutters
Safety instructions • When using cutting pliers: beware of wire ends flying off. Wear protective goggles and - if needed - gloves. • Each tool should only be used for its specified purpose. • Only handles marked with the symbol are insulating.
Wire classes Material examples
Type of wire
Tensile strength N/mm2 kp/mm2
copper, plastics
soft wire
220
22
nail, wire pin
medium hard wire
750
75
wire rope strand, steel wire
hard wire
1800
180
spring steel wire
piano wire
2300
230
Structure of Article Number
Finish of Pliers
Article-No.
Head / Handles
03 0 0 180 0
Head polished
Basic Model (e.g. Combination Pliers)
1
Head polished
2
Head polished
3
Pliers chrome plated
4
Pliers chrome plated
5
Pliers chrome plated
6
Pliers chrome plated
7
Pliers chrome plated
Style e.g. straight
Finish e.g. head polished, handles black atramentized
Length e.g. 180 mm
Care Tip A drop of oil on the polished surfaces and in the joint keeps your pliers in good working order and extends their service life!
Handles black atramentized
Handles plastic coated
Handles with two-colour dual component handles
Handles plastic coated
Handles with two-colour dual component handles
Handles insulated with two-colour dual component VDE-tested DIN EN/IEC 60900
Handles dipped plastic insulated VDE-tested DIN EN/IEC 60900
Contents The full extent of the range Combination Pliers
No. Article 01 08 02 03 09
Gripping Pliers
Page 12 12 13
Combination Pliers Small Combination Pliers High Leverage Combination Pliers Combination Pliers Lineman’s Pliers
14 15
Stripping Tools
No. Article
Page
11 Wire Strippers 11 92 Electronics Wire Stripper 12 Automatic Insulation Strippers 12 12 Universal Insulation Strippers 12 40 Self-Adjusting Insulation Strippers 12 42 Multistrip 10 12 60 Self-Adjusting Insulation Stripper 12 62 Self-Adjusting Insulation Stripper 12 80 Mini Stripping Tool 12 82 Wire Stripper for Fibre Optics 12 85 Stripping Tool 13 Electricians´ Pliers 13 72 Universal Pliers 14 Diagonal Insulation Strippers 15 Insulation Strippers 15 11 Coated-Wire Stripping Tweezers 16 20 Dismantling Tools 16 30 Dismantling Tool 16 40 Dismantling Tool 16 60 Coax-Stripping Tool 16 65 Stripping Tool for Data Cable 16 80 Universal Stripping Tools
6
17 18 18 19
No. Article 19 20 22 23
Jewellers´ Pliers Flat Nose Pliers Round Nose Pliers Flat Nose Pliers with cutting edges 25 Snipe Nose Side Cutting Pliers 26 Snipe Nose Side Cutting Pliers 27 Telephone Pliers 28 Assembly Pliers 29 Telephone Pliers 31 Grab Pliers 30 Long Nose Pliers 32 Relay Adjusting Pliers 33 Duckbill Pliers 34 Precision Electronics Gripping Pliers 35 Electronics Pliers 35 Electronics Pliers ESD 36 Electronics Mounting GripPliers Pliers 37 Relay Adjusting Pliers 38 Mechanics´ Pliers
Circlip Pliers
Page 29 29 30 30 31
No. Article 45 46 44 46 48
32 49 33 33 34 34 35 36 36 37
Cutting Nippers
Page 47
Special Retaining Ring Pliers External Circlip Pliers for fitting Grip Rings Internal Circlip Pliers External Circlip Pliers Precision Internal Circlip Pliers Precision External Circlip Pliers
47 48 49 50 51
Carpenters´ Pincers
38 39 41 42 43
No. Article 50 51 55 56 57 58
20
Grip Pliers 21 20
Page
Carpenters´ Pincers Carpenters´ Pincer Farriers` Pincer Farriers` Pincer Unsoling Pincer Potters` Pincers
52 52 53 53 53 53
No. Article 61 62
Page
Bolt End Cutting Nipper Electronics Oblique Cutting Nipper 64 Electronics End Cutting Nippers / ESD 67 High Leverage End Cutting Nippers 68 End Cutting Nippers 69 Mechanics End Cutting Nippers 70 Diagonal Cutters 71 KNIPEX-"CoBolt" 72 51 Diagonal Cutter for Fibre Optics 72 11 Diagonal Cutters for plastics and lead 74 91 Center Cutter 74 High Leverage Diagonal Cutters 75 Electronics Diagonal Cutters 76 Electro-Mechanics´ Diagonal Cutters 77 Electronics Diagonal Cutters / ESD 78 Electronics Super-Knips 78 Electronics Super-Knips ESD 79 Precision Electronics Side Cutters / ESD
57 57 58 59 59 60 60 61 62 62 63 63 64 65 65 66 67 68 69 70 71
21
Concretors´ Nippers
22 22 22 23 23 24 24 24 25 25 26 26 27 27
No. Article 40 41 42
Universal Grip Pliers Grip Pliers Welding Grip Pliers
Pipe Wrenches
Page 44 44 45
No. Article No. Article
Page
99 0 Concretors` Nippers 55 99 1 High Leverage Concretors' 55 Nippers
81 03 82 51 84 83 87 0
Pipe Gripping Pliers Angle Nose Battery Pliers Cycle Pliers Pipe Wrenches KNIPEX-"Cobra" XL / XXL
Page 73 73 73 74 76
Water Pump Pliers
No. Article 85 0 86 0 87 0 87 1 87 41 87 51 88 0 89 0 90 0
Insulated Tools
Cable and Wire Rope Cutters
Page
SmartGrip Pliers Wrenches KNIPEX-"Cobra" KNIPEX-"Cobra..matic" Multiple Slip Joint Spanner KNIPEX-"Cobra" ES KNIPEX-"Alligator" Water Pump Pliers Small Water Pump Pliers
75 77 78 79 79 80 81 82 82
Special Pliers
No. Article 94 10 94 15 94 35 95 02 95 03 95 05 95 95 3 95 61 95 61 95
Page
Cutter for Plastic Pipes 93 Cutter for Ribbon Cables 93 Mitre Shears 94 Vinyl Shears 94 Shears for KEVLARÂŽ Fibres 95 Combination Shears 95 Cable Shears 96 Cable Cutters 99 Wire Rope Cutter 100 Bowden Cable Cutter 101 Wire Rope and Cable 101 Cutters
Crimping Pliers and Cable Links
No. Article 90 25 90 4 90 55 90 61 90 71 91 00 91 11 91 30 91 5 91 6
Pipe Cutter Punch Lock Riveters Sheet Metal Nibbler Notching Pliers Revolving Punch Pliers Tile Nibbling Pincer Tile Breaking Pincer Glass Breaking Pincer Glass Nibbling Pincers Flat Nose Grozing Pliers
Page 83 84 84 85 85 86 86 86 87 87
Tweezers
No. Article 97 00 97 21 97 32 97 40 97 43 97 49 97 50 97 51 97 52 97 52 97 52 97 53 97
No. Article 92 92 92 92
Precision Tweezers / ESD Precision Tweezers VDE Plastic Tweezers Cross-Over Tweezers
Page 88 90 91 91
97 90 97 99
Page
Crimp Grip Pliers Crimping Pliers Crimping Pliers Insertion Tool for LSAPlus and identical Crimp System Pliers Crimp Profiles Crimping Pliers for Scotchlok Connectors Crimping Pliers for Western Plugs Four-Mandrel Crimping Pliers for turned contacts Lever Action Crimping Pliers Crimping Pliers "PreciForce" Self-Adjusting Crimping Pliers for End Sleeves Crimping Pliers for End Sleeves (ferrules) Crimp Assortments Cable Connectors
Tool Kits
DIN EN/IEC 60900
102 102 103 103
No. Article 01-03 Combination Pliers 11 Wire Strippers 14 Diagonal Insulation Stripper 22 Round Nose Pliers 25/26 Snipe Nose Side Cutting Pliers 70 Diagonal Cutters 92 Precision Tweezers 86 Pliers Wrenches 88 KNIPEX-"Alligator" 95 Cable Shears 95 Cable Cutters 98 Wrenches 98 Screwdrivers 98 Nut Drivers 98 Reversible Ratchets 98 Hexagon Sockets 98 Cable Knives 98 Torque Wrench 98 Voltage Tester 98 Electricians' Gloves 98 Plastic Slip-On Caps 98 Insulating Plastic Clamp 98 Tool Cases 98 Junior Hacksaw
Page 120 121 122 123 123 125 127 126 126 127 131 132 133 133 135 136 137 137 139 140 140 140 141 141
Sales Aids
104 105 106 107 108 109 110 111 113 114 117
No. Article 00 19 00 19 00 19 00 19 00 19 00 19
Sales Displays Test Supports Sales Displays Rotary Sales Stand Tool Bar (Pegboard) Show-Cabinets for Product Presentation 00 19 Brochure Holder 00 19 Hooks for perforated board 00 19 Pliers Racks
Page 146 147 147 147 150 151
No. Article 00 19 00 19 00 19 00 20 00 20 00 21 00 21
Circlip Pliers Sets Tool Pouch Tool Roll Pliers Sets Electronics Pliers Sets Tool Bag Tool Cases
Page 155 154 154 156 157 159 161
Electronic Pliers
No. Article
Page
11 92 Electronics Wire Stripper 18 12 60 Self-Adjusting Insulation 20 Stripper 35 Electronics Pliers 38 35 Electronics Pliers ESD 39 36 Electronics Mounting 41 Pliers 62 Electronics Oblique 57 Cutting Nipper 64 Electronics End Cutting 58 Nippers / ESD 75 Electronics Diagonal 65 Cutters 76 Electro-Mechanics´ 65 Diagonal Cutters 77 Electronics Diagonal 66 Cutters / ESD 78 Electronics Super-Knips / 68 78 ESD 69 79 Precision Electronics Side 70 Cutters / ESD 71 92 Precision Tweezers / ESD 88 94 15 Cutter for Ribbon Cables 93 00 20 Electronics Pliers Sets 157
152 152 153
7
KNIPEX – The Company
Experience
Quality for professionals
Specialists
KNIPEX specializes in the development and production of high-quality pliers and is Europe’s leading manufacturer of these products. It all started back in 1882 when C. Gustav Putsch set up his own forge shop in Cronenberg (now a suburb of Wuppertal). We are an independent fourth-generation family company.
KNIPEX pliers satisfy the highest expectations in terms of performance, ergonomics and service life. Our products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work.
We concentrate our knowledge and expertise on pliers. This is the only way to justify our claim that we are the best supplier in terms of quality, innovation and efficiency. Our success is assured by 650 qualified employees and we attach the greatest importance to their basic and advanced training.
Everything under one roof
The complete range With over a thousand separate styles and sizes KNIPEX offers a complete range of pliers for almost every application in trade and industry. The breadth and depth of our range ensures that the best tool can always be found for each application.
8
In Wuppertal we have 45,000 m2 (500,000 square feet) of factory space. All manufacturing operations, from forging (including making the forging die) to packaging, are done on our own premises. This method allows us to maintain stringent quality control standards and to co-ordinate all aspects of the manufacturing process.
Material
Tip-top technology
Innovation
In the tough and demanding world of everyday usage, KNIPEX pliers meet the challenge to the fullest satisfaction. In terms of material and construction, they are designed to function as heavy duty tools and deliver high load bearing capacity and long service life.
Innovation and high performance are not only characteristics of the tools we make but are also key elements in our production engineering. Modern state-of-the-art machinery ensures that we produce consistently high precision at the most economical cost ratio.
KNIPEX pioneers ideas in pliers design. Again and again, KNIPEX’s innovations offer future-oriented solutions and set standards for easy, effective and reliable work. For our development work we rely on an intensive sharing of experience with users. We utilize the most modern design technology and the highest efficiency testing and experimental equipment.
Partners in trade KNIPEX pliers are supplied only through distribution. We do not deliver direct to end users. We offer our partners in trade a high level of inventory availability, extensive consulting and training and a wide variety of sales support.
KNIPEX throughout the world KNIPEX pliers are in great demand throughout the world and we export over 60% of our production. An international network of distribution branches, agencies and importers connect us to our customers in over one hundred countries.
9
KNIPEX – Ergonomics Practical Advantages Ergonomics is the science of adapting technology to people in order to make work easier. Pliers, like other hand tools, should support the human hand-arm system as effectively as possible and at the same time keep strain and effort to a minimum. When designing KNIPEX pliers, we give extensive consideration to ergonomic criteria. Our aims are to ensure that they
ERGONOMICS
– require only a minimum of force in use – assure hand and finger joints a low-stress comfortable position when exerting force – allow good contact between the hand and handle.
Less force exerted due to the self-locking function of the "Cobra” and "Alligator” Water Pump Pliers. As the gripping jaws automatically bite tightly into the workpiece, there is no need to squeeze the handles together. This relieves the hand muscles.
Reduction of effort Cutting hard material in particular usually requires great manual effort but KNIPEX pliers require much less force thanks to their particularly favourable leverage ratios, which are to some extent due to unique lever designs. The benefit for the user is that they noticeably reduce the amount of force he has to apply. Particularly high leverage pliers models in this catalogue are marked with a power symbol.
F2 = 3971 N l2 = 21 mm
High Leverage Concretors’ Nippers: 27% saving in power
KNIPEX "CoBolt”: 61% saving in power
l1 = 250 mm
F1 = 300 N
Cutting through 3-mm-diameter (1/8” dia.) binding wire using a High Leverage Concretor’s Nipper requires only 300 N (30.0 kp) force as opposed to 412 N (41.2 kp) with a normal Concretor’s Nipper of the same length.
10
Cutting through 2-mm-diameter (1/16” dia.) piano wire using the KNIPEX "CoBolt” requires only 192 N (19.2 kp) force as opposed to 499 N (49.9 kp) with a High Leverage Diagonal Cutter of the same length.
smaller contact surface in case of plastic coated handles
contact surface of dual component handles A particularly advantageous solution for favourable hand positioning is offered by the Ratchet Action Cable Cutter Art No. 95 31 with a two-stage mechanism. Depending on the required hand force, a lower (one-stage mode) or higher (two-stage model) handle distance can be selected.
The contact surfaces in pliers with two-colour dual component handles are more than twice as large as pliers with plastic coated handles. The force is distributed to across larger surface – this reduces the pressure correspondingly.
Gentle on the wrist
Hand-compatible handle design
A lot of KNIPEX pliers are available with various pliers head shapes and positions. This means that the pliers can be adapted to the application and the hand held in a natural and strain-relieving position. Also, the spacing between the handles is engineered to ensure the best possible deployment of force (too wide or too narrow a space between the handles makes it more difficult to apply the required force).
The shaping and material designing of KNIPEX multi-component handles are the result of extensive studies into gripping patterns and movement flows when working with pliers. The hand force is distributed over as large a surface as possible which permits a high transfer of force and prevents pressure points forming on the hand. The handles have different zones which make allowance for the interaction between hand and handle and their different aspects: holding – sliding - guiding.
Initial cut Final cut
1
Positioning and supporting zone
2
Gripping zone
3
Movement zone
The cable shears 95 11 200 with twin cutting edge makes it possible to cut through cables of up to 20 mm in diameter. Due to the two stage cutting process, the handles always remain in an ergonomic position when force is applied, even when used on large cross-sections. Examples of specially designed pliers heads for work in confined working areas
High Leverage Diagonal Cutter Article No. 74 with angled head
The shape of the upper part of the handle offers support, especially where forces take effect in a longitudinal direction.
Use of softer material with a better grip where force needs to be applied and slipping prevented.
Use of harder material with less friction where the hand needs to move along the handle
11
01
01 Combination Pliers,
Chrome Vanadium DIN ISO 5746
01 06 190
Article-No. 9 EANLength mm
9 Head
9 Handles
왘 for heaviest duty 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft, hard and piano wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC
9 Cutting capacities
Code 4003773-
01 06 160
040729
190
040415
chrome plated chrome plated
insulated with two-colour dual component handles VDE-tested
08
ø mm ø mm ø mm mm2 2.0 1.5 10.0 16.0
g 210
2.5
300
2.0
13.0 25.0
08 Small Combination Pliers 왘 compact combination pliers for professionals and hobbyists 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft and hard wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 Vanadium steel, oil-hardened and tempered
08 05 110
Article-No. 9 EANLength mm
08 05 110
12
9 Head
9 Handles
9 Cutting capacities
Code 4003773-
034957
chrome plated
with two-colour dual component handles
ø mm ø mm ø mm mm2 2.5 1.6 9.0 10.0
g 90
왘 particularly wear resistant gripping jaws due to additional hardening; hardness of the gripping jaws approx. 53 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered
02
02 High Leverage Combination Pliers DIN ISO 5746
02 01 180
02 02 180
왘 for heaviest duty 왘 35% saving in power due to new, improved lever action 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft, hard and piano wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 high grade special tool steel, oil-hardened and tempered
KNIPEX High Leverage Combination Pliers with optimum position of the joint facilitate cutting as well as powerful gripping, bending and pulling.
Requires 35 % less effort Cutting a hard wire of 2.0 mm dia. with a High Leverage Combination Plier of 180 mm length requires a handforce of only 318 N (31.8 kp) instead of 486 N (48.6 kp) with a common Combination Plier of same length.
02 05 180
02 06 200
02 07 225 Gripping zone for round material
Article-No. 9 EANLength mm
02 01 180 200 225 02 02 180 200 225 02 05 180 200 225 02 06 180 200 225 02 07 200 225
9 Head
9 Handles
9 Cutting capacities
Induction hardened cutting edges also suitable for piano wire
Code 4003773-
013174 013181 013198 034896 034902 043379 043072 043089 010005 010012 010029 010036 022299 022305
polished
plastic coated
polished
with two-colour dual component handles
chrome plated
with two-colour dual component handles
chrome plated
insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested
chrome plated
ømm 2.5 2.8 3.0 2.5 2.8 3.0 2.5 2.8 3.0 2.5 2.8 3.0 2.8 3.0
ømm 2.0 2.2 2.5 2.0 2.2 2.5 2.0 2.2 2.5 2.0 2.2 2.5 2.2 2.5
ømm mm2 11.5 16.0 13.0 25.0 14.0 25.0 11.5 16.0 13.0 25.0 14.0 25.0 11.5 16.0 13.0 25.0 14.0 25.0 11.5 16.0 13.0 25.0 14.0 25.0 13.0 25.0 14.0 25.0
g 205 280 360 235 330 400 235 330 400 240 335 405 385 490
Powerful gripping, pulling and bending thanks to high leverage
13
03
03 Combination Pliers DIN ISO 5746
03 01 180
왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft and hard wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 special tool steel, oil-hardened and tempered
Gripping zone for flat material
03 02 180
Gripping zone for round material
03 05 180
03 06 180
Cutting edges for wire and cable
Article-No. 9 EANLength mm
03 00 180 200 250 03 01 140 160 180 200 250 03 02 160 180 200 03 05 140 160 180 200 03 06 160 180 200 03 07 160 180 200 250 14
9 Head
9 Handles
9 Cutting capacities
Code 4003773-
015161 015178 015185 015192 013235 013242 013259 015222 023203 023197 034940 039730 039518 034933 041146 021902 021926 033776 015307 015314 015321 015345
polished
black atramentized
polished
plastic coated
polished
with two-colour dual component handles
chrome plated
with two-colour dual component handles
chrome plated
insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested
chrome plated
ø mm 3.4 3.8 3.8 2.8 3.1 3.4 3.8 3.8 3.1 3.4 3.8 2.8 3.1 3.4 3.8 3.1 3.4 3.8 3.1 3.4 3.8 3.8
ø mm 2.2 2.5 2.5 1.8 2.0 2.2 2.5 2.5 2.0 2.2 2.5 1.8 2.0 2.2 2.5 2.0 2.2 2.5 2.0 2.2 2.5 2.5
ø mm mm2 12.0 16.0 13.0 16.0 15.0 25.0 9.0 10.0 10.0 16.0 12.0 16.0 13.0 16.0 15.0 25.0 10.0 16.0 12.0 16.0 13.0 16.0 9.0 10.0 10.0 16.0 12.0 16.0 13.0 16.0 10.0 16.0 12.0 16.0 13.0 16.0 10.0 16.0 12.0 16.0 13.0 16.0 15.0 25.0
g 210 260 440 110 180 220 280 480 215 260 330 135 215 260 330 220 265 335 265 305 380 610
09
09 "Lineman’s Pliers",
High Leverage Combination Pliers 왘 solid construction for heaviest impact; universally applicable 왘 high transmission ratio for easy cutting 왘 requires 40% less effort compared with conventional combination pliers thanks to optimised transmission ratio 왘 ergonomically optimised handle shape for firm contact to the hand and fatigue reducing operation 왘 particularly striking crosswise serrated gripping zone in the jaws - for strong gripping and pulling 왘 additional gripping zone below the articulated joint for powerful leverage and pressing performance 왘 with cutting edges for soft and hard wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 high grade special tool steel, oil-hardened and tempered
DIN ISO 5746
09 01 240
09 02 240
Crosswise serrated gripping zone for firm gripping and pulling on construction of railings
Gripping zone below the joint for powerful leverage
Powerful gripping zones for pulling, squeezing and leverage performance
Article-No. 9 EAN-
9 Head
polished
09 02 240
polished
065005
9 Handles
9 Cutting capacities
Long cutting edges for cutting flat cables
Length Code mm 400377309 01 240 064992
with non-slip plastic coating with two-colour dual component handles
ø mm 4,6
ø mm 3,0
g 465
4,6
3,0
490
15
11
11 Wire Strippers 왘 for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10.0 mm2 cable cross section 왘 easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut 왘 special tool steel, oil-hardened and tempered
11 02 160
Style 0: 왘 with opening spring Style 1: 왘 without opening spring
11 06 160
11 05 160
11 06 160
Article-No. 9 EANLength mm
9 Style
9 Head
9 Handles
Code 4003773-
11 01 160 11 02 160
013556 023180
11 05 160
039570
11 06 160
021933
11 07 160
015499
11 12 160
034964
11 15 160
042471
11 17 160
015505
0
0
polished polished chrome plated chrome plated
1 1
chrome plated polished chrome plated chrome plated
plastic coated with two-colour dual component handles with two-colour dual component handles insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested with two-colour dual component handles with two-colour dual component handles plastic dipped insulated VDE-tested
9 Stripping capacities
ø mm mm2 AWG g 5.0 10.0 7 135 160 160 165
195 160 160 195
17
11
11 Electronics Wire Stripper 왘 for single, multiple and fine stranded cables with 0.1 up to 0.8 mm dia. with plastic or rubber insulation 왘 easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut
11 92 140
Article-No. 9 EANLength mm
11 92 140
9 Head
9 Handles
4003773-
016908
polished
ø mm with two-colour 0.1 - 0.8 dual component handles
g 100
12
12 Automatic Insulation Strippers
12 11 180
12 11 180 9 Head
9 Handles
9 Stripping capacities
Code 4003773-
12 11 180
000792
12 21 180
000815
12 19 180 12 29 180
022145 022152
18
왘 with replaceable blades of special steel for 4 and 6 positions resp. for different wire cross sections 왘 leaves wire undamaged; even multi-stranded conductors are stripped gently 왘 during stripping, the wire is held firmly by clamping jaws 왘 with length stop for constant stripping length during repetitive work 왘 a spring leads the stripper back to the starting position 왘 strong light-metal body
12 21 180
Article-No. 9 EANLength mm
9 Stripping capacities
Code
ø mm 0.5/1.2/ 1.6/2.0
nickel plastic handles plated nickel plastic handles plated 1 pair of spare blades for 12 11 180 1 pair of spare blades for 12 21 180
mm2
0.5-0.75/1.0/ 1.5/2.5/4.0/6.0
ø Inch 1⁄64 / 3/64 1/16 / 5/64
AWG
g 400
20-18/17/ 400 15/13/11/9
왘 with opening spring 왘 the polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 special tool steel, oil-hardened and tempered
12
12 Universal Insulation Strippers,
particularly suitable for Teflon® 왘 with new stripping mechanism 왘 easy stripping of difficult insulating materials such as Teflon®, silicone, Radox®, Kapton® and rubber as well as multilayered insulations 왘 leaves wire undamaged thanks to precision-ground blade shapes; even multi-stranded conductors are stripped gently 왘 with length stop for constant stripping length during repetitive work 왘 4 replaceable blades 왘 smoothly operating mechanism 왘 compact design, lightweight construction 왘 high operation comfort thanks to handy shape
and solar cables
12 12 02
12 12 06
12 12 11
Model 12 12 02: 왘 with additional cable guide for exact positioning of the conductor in the stripping area of the blade
Model 12 12 11: 왘 with additional cable support 왘 for solar cables (weatherfacilitating the alignment of resistant cable for connecting multilayered insulated conductors photovoltaic power generation 왘 blades adapted to match larger devices) wire cross-sections 왘 particularly adjusted to RADOX® insulations of solar cables
12 12 02 with cable guide and length stop
Precise cutting of the insulation to a complete extent
Two pairs of blades (1) cut the insulation to a complete extent. Then the blade pairs move apart, and thus the insulation is removed form-fit (2). The plier opens automatically after the stripping procedure.
Insulation
Copper Conductor
Positive stripping thanks to precise shape of the blades
6 2,5
12 12 02
12 12 06
Article-No. 9 EAN-
9 Head
9 Handles
12 12 10
4003773-
12 12 02
048077
12 12 06 12 12 10 12 12 11 12 19 02 12 19 06 12 19 10 12 19 11
049005 049012 062998 049036 049043 049050 063001
mm2 0.03 - 2.08
nickel plated two-colour dual component handles nickel plated two-colour dual component 0.14 - 6.00 nickel plated two-colour dual component 2.50 - 10.00 nickel plated two-colour dual component 1.50 - 6.00 spare blades for 12 12 02 spare blades for 12 12 06 spare blades for 12 12 10 spare blades for 12 12 11
1,5
12 12 11
9 Stripping capacities
Code
4
AWG 32 - 14
Length mm 195
g 430
26 - 10 13 - 7 15 - 9
195 195 195
430 430 450
Teflon® is a registered trademark of E. I. du Pont de Nemours and Company Kapton® is a registered trademark of E. I. du Pont de Nemours and Company Radox® is a registered trademark of Huber & Suhner AG
19
12
12 Self-Adjusting Insulation Strippers 왘 for single, multiple and fine-stranded wire cables with plastic or rubber insulation 왘 adjusts automatically to the respective cable cross-section, which prevents damage to the conductor 왘 cutting depth can be adjusted for different insulation materials 왘 with wire cutter for copper and aluminium wires, multiple strand up to 10 mm2 and single strand up to 6 mm2 왘 smoothly operating mechanism 왘 easily interchangeable blades and plastic jaws 왘 low weight 왘 body made of tough fibreglass reinforced plastic
patented
12 40 200
0,03 - 10,0 mm2
Adjustable length stop
Precise stripping prevents damage to the conductor
Article-No. 9 EAN-
9 Stripping capacities
Length mm
12 40 200 12 49 01 12 49 02 12 49 03 12 50 200 12 59 01 12 59 02
KNIPEX Self-Adjusting Insulation Strippers are indispensable for the electrical installation; fast and secure working in a large range of application.
Model 12 40 200: 왘 range of application: conductors 0.03 - 10.0 mm2 왘 for thin ribbon cables up to 10.0 mm width in a single pass 왘 length stop adjustable from 3.0 - 18.0 mm and easily interchangeable Model 12 50 200: 왘 range of application: conductors 2.5 - 16.0 mm2
Wire cutter for multiple strand wire cables up to 10.0 mm2
9 Length stop
Code 4003773-
026662 026679 026686 026693 034407 034414 034421
mm2 0.03 - 10.0 spare blades spare clamping jaws spare length stop 2.5 - 16.0 spare blades spare clamping jaws
AWG 32 - 7 for 12 40 200 for 12 40 200 for 12 40 200 13 - 5 for 12 50 200 for 12 50 200
12
mm 3.0 - 18.0
g 200
200
12 Self-Adjusting Insulation Stripper
12 60 135
Article-No. 9 EANLength mm
12 60 135 12 69 135 20
9 Stripping capacities
왘 for single, multiple and fine-stranded wire cables with plastic or rubber insulation of 0.08 - 1.0 mm2 왘 adjusts automatically to the respective cable cross-section, which prevents damage to the conductor 왘 for thin ribbon cables in a single pass 왘 with wire cutter for copper and aluminium wires, multiple strand up to 1.0 mm2 왘 length stop adjustable from 2.5 - 7.0 mm
9 Length stop
왘 왘 왘 왘
easily exchangeable blades smoothly operating mechanism low weight body made of tough fibreglass reinforced plastic
Code 4003773-
022169 022176
mm2 AWG 0.08 - 1.0 28 - 17 spare blades for 12 60 135
mm 2.5 - 7.0
g 90
Adjusts automatically to the respective cable cross-section from 0.08 – 1.0 mm2
12
”Multistrip 10“, patented
12 42 195
0,03 - 10,0 mm2
Steel restrain jaws with cutting edges avoid skidding of the cable
Article-No. 9 EANLength mm
12 42 195 12 49 21 12 49 23
Code 054580 057581 057604
Self-Adapting Universal Insulation Stripper
왘 fully automated adjustment to different cross-section depending insulation thicknesses throughout the stripping range from 0.03 - 10.0 mm2 왘 the so far common fine adjustment of the tool is no longer necessary due to the unique self-infeeding of the cutting depth preventing damage to the conductor 왘 the steel-made restrain jaws Wire cutter for with integrated cutting edges multiple stranded wire cables up to 10.00 mm2 very often also allow professional stripping of cables with demanding insulating materials like Teflon® and Radox® 왘 with wire cutter for copper and aluminium wires, multiple stranded up to 10 mm2 and single stranded up to 6 mm2 왘 smoothly operating mechanism Precise stripping from Opens automatically once 왘 easily interchangeable screw-on the stripping operation is 0.03 up to 10.0 mm2 style blades, length stop and completed restrain jaws with cutting edges 왘 body made of tough fibreglass reinforced plastic 9 Stripping capacities 왘 ergonomic soft compound zone in the handle area for a secure mm2 AWG g grip 0.03 - 10.0 32 - 7 150 spare blades block spare length stop
The cutting edges at the steel restrain jaws (1) firmly restrain the insulated cable and avoid skidding. The stripping blades (2) cut to the correct depth and remove the insulation cleanly without any manual adjustment.
1
1 2
2
Teflon® is a registered Trademark of E. I. du Pont de Nemours and Company Radox® is a registered Trademark of Huber & Suhner AG
12
Self-Adjusting Insulation Stripper
12 62 180
0,2 - 6,0 0.2 6.0 mm2
Precise stripping from 0.2 up to 6.0 mm2
Article-No. 9 EANLength mm
12 62 180 12 69 21
9 Stripping Capacities
Code 054573 060093
mm2 0.2 - 6.0 spare blades
AWG 24 - 10
g 180
왘 compact standard tool at a favourable price for all current cable cross-sections and insulating materials 왘 for single, multiple and fine stranded cables of 0.2 up to 6.0 mm2 with standard insulation 왘 adjusts automatically to the respective cable cross-section, which prevents damage to the conductor Wire cutter up to 2.5 mm2 왘 high operation comfort thanks to handy shape and low weight 왘 narrow head style for use in confined areas 왘 with wire cutter for copper an aluminium wires up to 2.5 mm2 왘 with adjustable length stop from 6.0 - 18.0 mm for constant stripping length during repetitive work 왘 easily exchangeable blades 왘 body made of tough, fibreglass reinforced plastic with ergonomic soft plastic gripping Stripping in confined areas zone in the handle 21
12
12 Mini Stripping Tool 왘 for stripping thin copper conductors of 0.25 - 0.8 mm dia. 왘 precise stripping because of the tool’s stepwise adjustment to the conductor's diameter 왘 with wire cutter 왘 adjustable length stop from 4.0 - 15.0 mm
12 80 100 SB Article-No. 9 EANLength mm
왘 with locking device 왘 shock-resistant plastic body
9 Stripping capacities
Code 4003773-
12 80 100 SB 043119
ø mm 0.25 - 0.8
12
12 Wire Stripper
AWG 30 - 20
g 50
for Fibre Optics 왘 to remove primary and secondary coating of fibre optics
Fibre optics primary coating
12 82 130 SB
secondary coating (Conductor insulation)
Article-No. 9 EANLength mm
9 Head
9 Handles
9 Stripping capacities
ø mm primary coating 0.125, secondary coating 0.25
g 55
Code 4003773-
12 82 130 SB 050094
burnished
with plastic handles
KEVLAR® fibres Sheath
KEVLAR® is a registered Trademark of E. I. du Pont de Nemours and Company
12
12 Stripping Tool
for Fibre Optics 왘 to remove primary coating of fibre optics 0.125 mm dia. 왘 blade dia. 0.18 mm, hole for cable feeding 0.30 mm dia. 왘 adjustable length stop 왘 shock-resistant plastic body
12 85 100 SB
Article-No. 9 EANLength mm
Code 4003773-
12 85 100 SB 043126
22
9 Stripping capacities ø mm to remove primary coating of fibre optics 0.125 mm dia.
g 40
Removes precisely the primary coating from fibre optics
13
13 Electricians’ Pliers 왘 the ideal plier for cable work 왘 for gripping and bending wire 왘 for cutting soft, medium and hard wire 왘 precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 with precision stripping holes 왘 for crimping end sleeves (ferrules) 왘 high grade special tool steel, oil-hardened and tempered
13 01 160
Model 13 01 614: 왘 for AWG 10/12/14
13 02 160
Gripping
Article-No. 9 EANLength Code mm/Zoll 400377313 01 160 010210 13 01 614 040231 13 02 160 010470
9 Head
polished polished polished
13
13 Universal Pliers
Cutting
Stripping
9 Handles
9 Stripping capacities
plastic coated plastic coated with two-colour dual component handles
Length mm
9 Head
g 110 110 150
for Data Cable, STP 왘 for cutting the whole cable, the single conductor, the shield and the plastic core 왘 steel point at the joint for longitudinal scratching of the shield foil 왘 prismatic blades below the joint for dismantling the cables 왘 special tool steel, oil-hardened
13 72 160 SB
Article-No. 9 EAN-
mm2 AWG 0.5-0.75/1.5/2.5 10/12/14 0.5-0.75/1.5/2.5
Crimping
9 Handles
Code 4003773-
13 72 160 SB 052319
burnished
with two-colour dual component handles
g 80
Smooth and clean dismantling of data cables
23
14
14 Diagonal Insulation Strippers
14 22 160
왘 the essential plier for electrical installation work 왘 precision stripping holes for single (solid) conductors of 1.5 and 2.5 mm2 왘 induction hardened precision blades for soft wire up to 4.0 mm dia., cutting edge hardness approx. 60 HRC 왘 Vanadium electric steel, oil-hardened and tempered
14 26 160 Article-No. 9 EANLength mm
9 Head
9 Handles
9 Stripping capacities
4003773-
14 22 160
034988
polished
14 26 160
040279
chrome plated
with two-colour dual component handles insulated with two-colour dual component handles VDE-tested
15
15 Coated-Wire Stripping Tweezers
15 11 120
Article-No. 9 EANLength mm
15 11 120
9 Handles
021551 021568 021575 021582
1.5 + 2.5
15 + 13
210 Multi-functional: cutting and stripping
왘 for stripping off varnished insulation on copper wires 왘 blades for other wire diameters available as spare parts 왘 tweezers body made of spring steel 왘 plastic laminated handles
Article-No. 9 EAN-
9 Style
0.6 for wires: 0.5 0.6 0.8 1.0
g 35
Precisely milled blades for clean stripping
with opening spring 왘 for stripping thin wires 왘 accurate boring to match diameter of wire, precise stripping prism, non-adjustable 왘 with opening spring 왘 special tool steel, oil-hardened and tempered
15 61 160
24
g 205
ø mm
plastic laminated handles
015550
15 15 51 160 15 61 160 15 81 160
AWG 15 +13
9 Stripping capacities
4003773-
15 Insulation Strippers
Length mm
mm2 1.5 + 2.5
Code
spare blades
15 19 005 006 008 010
Code
9 Head
9 Handles
9 Stripping capacities
Code 4003773-
015567 014843 015574
polished polished polished
plastic coated plastic coated plastic coated
ø mm 0.5 0.6 0.8
g 110 110 110
16
Dismantling and Cable Knives see pages 137 - 139
16 Dismantling Tools
16 20 16 SB
16 20 165 SB
Article-No. 9 EANLength mm
16 20 16 SB 16 20 165 SB 16 20 28 SB 16 29 165
9 Handles
9 Stripping capacities
Code 4003773-
060451 043133 060468 043140
shock-resistant plastic body shock-resistant plastic body shock-resistant plastic body spare blade
16
16 Dismantling Tool
16 30 135 SB
Article-No. 9 EANLength mm
왘 for stripping all common round cables 왘 self-cocking holding lever 왘 with adjusting screw for cutting depth adaptation 왘 turnable blade for circular and longitudinal cutting 왘 spare blade inside the handle 왘 impact resistant plastic body made of wear-resistant polyamide 왘 secure grip due to soft component material on handle and holding lever to avoid slipping
9 Handles
ø mm 4.0 - 16.0 8.0 - 28.0 8.0 - 28.0
ø Inch 3/16 - 5/8 5/16 - 1 1/8 5/16 - 1 1/8
Model 16 20 16 SB: 왘 for cables from 4.0 up to 16.0 mm dia. Model 16 20 165 SB 왘 with knife and hook blade inclusive protective cap 왘 for cables from 8.0 up to 28.0 mm dia. Model 16 20 28 SB: 왘 for cables from 8.0 up to 28.0 mm dia.
Length mm g 130 80 165 100 130 80
Self-turning drag blade for comfortable dismantling
왘 for dismantling round PVC, rubber, silicone, PTFE cables from 6.0 - 29.0 mm dia. 왘 self-cocking holding lever 왘 with knurled nut for cutting depth adjustment 왘 changing from circular to longitudinal cutting by turning the tool body 왘 spiral cutting for longer stripping areas 왘 shock-resistant plastic body 왘 exchangeable blade
9 Stripping capacities
Code 4003773-
16 30 135 SB 026907 16 39 135 027317
shock-resistant plastic body spare blade
ø mm 6.0 - 29.0
ø Inch g 15/64 -1 9/64 115 Adjustable cutting depth for precise dismantling
25
16
16 Dismantling Tool 왘 for dismantling round cables exceeding 25.0 mm dia. 왘 removes all kinds of insulation layers 왘 suitable for longitudinal and circular cutting 왘 cutting depth can be adjusted up to 5 mm 왘 replaceable blade (both sides can be used)
16 40 150
Article-No. 9 EANLength mm
16 40 150 16 49 150
9 Handles
9 Stripping capacities
왘 tool body made of fibreglass reinforced polyamide
Code 4003773-
026709 026716
fibreglass reinforced polyamide spare blade
ø mm ø Inch g for round cables over 25.0 1.0 210 Adjustable cutting depth
Setting the tool for longitudinal cut
16
Longitudinal cut
Turning the tool for circular cut
Circular cut
16 Coax-Stripping Tool
16 60 05 SB
Article-No. 9 EAN-
왘 for stripping Coax-cables (RG 58, RG 59 and RG 62) 왘 for stripping outer sheath, shield and dielectricum in one operating cycle 왘 with three built-in blades 왘 the cutting depth of each blade can be adjusted individually by means of a hexagonal key (Allen key) 왘 the blade spacing remains constant 왘 tool body made of plastic
9 Stripping capacities
Code 4003773-
16 60 05 SB 044888
26
Cabel RG 58, RG 59 and RG 62
Length mm 105
3 stripping steps in one operation
g 65
Dismantling of a Coax-cable in three steps
16
16 Coax-Stripping Tool 왘 for dismantling and stripping all common Coax-cables between 4.8 - 7.5 mm dia. (e. g. for TV- and satellite antenna), also suitable for PVC round cable 3 x 0.75 mm2 왘 with linear scale 5.0 - 20.0 mm 왘 double shell, folding back stripping tool 왘 with opening spring and locking lever 왘 tool body made of fibreglass reinforced polyamide
16 60 100 SB
Article-No. 9 EANLength mm
9 Stripping capacities
Code ø mm ø Inch 4.8 - 7.5 5/32 -19/64 round cables 3 x 0.75 mm2
4003773-
16 60 100 SB 040811
16
16 Stripping Tool
Article-No. 9 EAN-
g 35
for Data Cable 왘 for dismantling UTP + STP data cable between 5.0 and 15.0 mm dia. 왘 double shell, folding back stripping tool 왘 with opening spring and locking lever 왘 practical clip for safe transport 왘 tool body made of fibreglass reinforced polyamide
16 65 125 SB
Length mm
Dismantling a Coax-cable 4.8 – 7.5 mm Ø
9 Types of cables
9 Stripping capacities
Stripping the conductor of a Coax-cable
Code ø mm 5.0 - 15.0
4003773-
16 65 125 SB 043157
UTP + STP
16
16 Universal Stripping Tools
16 80 125 SB
ø Inch 13/64 - 19/32
g 65
왘 for dismantling and stripping all common round and damp-proof installation cables between 8.0 - 13.0 mm dia. (e. g. 3 x 1.5 mm2 up to 5 x 2.5 mm2) 왘 also for use in conduit and distribution boxes 왘 double shell, folding back stripping tool 왘 with opening spring and locking lever 왘 practical clip for safe transport 왘 tool body made of fibreglass reinforced polyamide
Stripping of UTP/STP data cables between 5.0 – 15.0 mm dia.
Model 16 85 125 SB: 왘 with additional blade for longitudinal cuts 왘 telescopic blade inside 왘 stripping device for cross-sections 0.2/0.3/0.8/1.5/ 2.5/4.0 mm2
16 85 125 SB Article-No. 9 EANLength mm
9 Types of cables
9 Stripping capacities
Code 4003773-
16 80 125 SB 040828 16 85 125 SB 060444
round cables (3 x 1,5 mm2 up to 5 x 2,5 mm2)
ø mm 8,0 - 13,0
Ø Inch 5/16-33/64
9 Stripping capacities for cross-sections
mm2
g 65
0,2/0,3/0,8/1,5/2,5/4,0
90
Stripping of round cables between 8.0 – 13.0 mm dia.
27
19
19 Jewellers Pliers,
Round Nose Pliers 왘 for fine wire and jewellery work 왘 ideal for cutting and bending work, e. g. in electronics 왘 for forming wire loops 왘 precision ground round jaws with fine, pointed tips 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 Vanadium steel, oil-hardened and tempered
19 01 130
Ø 1,0
2,0
32 8,0
Article-No. 9 EANLength mm
19 01 130 19 03 130
9 Head
9 Handles
13,5
Code g 70 70
4003773-
014478 014348
polished chrome plated
plastic coated plastic coated
20
20 Flat Nose Pliers DIN ISO 5745
왘 short, flat jaws 왘 serrated gripping surfaces 왘 special tool steel, oil-hardened and tempered
20 01 160
20 02 160
20 05 160
20 06 160
Article-No. 9 EANLength mm
20 01 125 140 160 180 200 20 02 140 160 20 05 140 160 20 06 160
9 Head
9 Handles
Code
L3
4003773-
014447 014454 015017 015666 015673 043386 035008 042464 042457 033783
polished
polished chrome plated chrome plated
plastic coated
with two-colour dual component handles with two-colour dual component handles insulated with two-colour dual component handles VDE-tested
9 Dimensions W3
T1
mm
mm
mm
27.0 28.0 30.0 35.0 38.0 28.0 30.0 28.0 30.0 30.0
14.5 15.5 17.0 19.0 21.0 15.5 17.0 15.5 17.0 17.0
8.0 9.5 9.5 10.0 12.0 9.5 9.5 9.5 9.5 9.5
g 80 110 140 190 275 145 170 145 170 175
L3 T1 W3
29
22
22 Round Nose Pliers DIN ISO 5745
왘 for forming wire loops 왘 precision ground, short, round jaws 왘 smooth tips 왘 special tool steel, oil-hardened and tempered
22 01 160
22 02 160
22 05 160
22 06 160
Article-No. 9 EANLength mm
9 Head
9 Handles
Code 4003773-
22 01 125 140 160 180 22 02 140 160 22 05 140 160 22 06 160
014461 013013 015024 015819 043430 023173 042891 042907 033790
22 07 160
015901
polished
plastic coated
polished
with two-colour dual component handles with two-colour dual component handles insulated with two-colour dual component handles plastic dipped insulated VDE-tested
chrome plated chrome plated chrome plated
23
23 Flat Nose Pliers
9 Dimensions L3 W3 mm mm 27.0 14.5 28.0 16.5 30.0 18.0 35.0 21.0 28.0 16.5 30.0 18.0 28.0 16.5 30.0 18.0 30.0 18.0 VDE-tested 30.0 18.0
D1 ø mm 2.0 2.5 3.0 3.5 2.5 3.0 2.5 3.0 3.0
T1 mm 8.0 9.5 9.5 10.5 9.5 9.5 9.5 9.5 9.5
3.0
9.5 205
g 70 100 140 180 135 165 135 165 170
Ø D1
L3 T1 W3
with cutting edges, Precision Mechanics Pliers 왘 suitable for gripping and cutting work in precision mechanics 왘 long, tapering jaws 왘 serrated gripping surfaces 왘 with cutting edges for soft wire 2.5 mm dia. and medium hard wire 1.6 mm dia. 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC
23 01 140
왘 high grade special tool steel, oil-hardened and tempered
35 7,0 12,5
Article-No. 9 EANLength mm
23 01 140 30
9 Head
9 Handles
Code 4003773-
015918
polished
plastic coated
g 65
25
25 Snipe Nose Side Cutting Pliers,
Radio Pliers
DIN ISO 5745
25 01 160
Style 0: straight jaws
왘 suitable for gripping and cutting work in precision mechanics 왘 pointed, half-round jaws 왘 serrated gripping surfaces 왘 with cutting edges for medium hard and hard wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 high grade special tool steel, oil-hardened and tempered Style 0: 왘 straight jaws
25 02 160 Style 1: 왘 40° bent jaws
Style 0: straight jaws
25 06 160 Style 0: straight jaws
W4
T2
L3 T1 W3
25 26 160 Style 2: 40° bent jaws
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377325 01 125 015932 140 013082 160 013099 25 02 140 023159 160 023166 25 03 125 015956 160 014492 25 05 140 035015 160 022817 25 06 160 033806
25 21 160 25 25 160
015994 016007
25 26 160
052111
0
polished
plastic coated
polished
with two-colour dual component handles plastic coated
chrome plated chrome plated chrome plated
2
polished chrome plated
chrome plated
40°
9 Handles
with two-colour dual component handles insulated with two-colour dual component handles VDE-tested plastic coated with two-colour dual component handles
insulated with two-colour dual component handles VDE-tested
9 Cutting capacities
9 Dimensions
ømm 2.2 2.5 2.5 2.5 2.5 2.2 2.5 2.5 2.5 2.5
ømm 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
L3 mm 27.0 42.0 50.0 42.0 50.0 27.0 50.0 42.0 50.0 50.0
W3 mm 13.0 15.0 16.5 15.0 16.5 13.0 16.5 15.0 16.5 16.5
T1 mm 7.0 8.0 9.5 8.0 9.5 7.0 9.5 8.0 9.5 9.5
W4 mm 2.5 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 3.0
T2 mm g 1.8 70 2.0 90 2.5 115 2.0 110 2.5 145 1.8 70 2.5 115 2.0 110 2.5 145 2.5 150
2.5 2.5
1.6 1.6
50.0 50.0
16.5 9.5 16.5 9.5
3.0 3.0
2.5 2.5
115 145
2.5
1.6
50.0
16.5 9.5
3.0
2.5
150
31
26
26 Chain Nose Side Cutting Pliers,
Stork Beak Pliers
DIN ISO 5745
26 12 200 Style 1: straight jaws
왘 high loadable, elastic precision points 왘 half-round, long jaws 왘 serrated gripping surfaces 왘 with cutting edges for medium hard wire max. dia. 3.2 mm and hard wire max. dia. 2.2 mm 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 Vanadium steel, oil-hardened and tempered
KNIPEX Snipe Nose Side Cutting Pliers (Stork Beak Pliers) are forged from Vanadium steel and carefully hardened. The slim precision tips withstand high demands, particularly bending loads.
Style 0: 왘 straight jaws
26 15 200
Style 1: 왘 40° bent jaws
Style 1: straight jaws
High loadable elastic precision tips
26 22 200 3
2.5
Style 2: 40° bent jaws
23
73
9.5
26 26 200
17.5
Style 2: 40° bent jaws Article-No. 9 EANLength mm
9 Style
9 Head
Code 4003773-
26 11 200 26 12 200
013105 023142
26 13 200 26 15 200
016038 035022
chrome plated chrome plated
26 16 200
022831
chrome plated
26 17 200
016069
chrome plated
26 21 200 26 22 200
013112 023135
26 23 200 26 25 200
016076 035039
chrome plated chrome plated
26 26 200
022855
chrome plated
26 27 200
016090
32
9 Handles
1
2
40°
polished polished
polished polished
chrome plated
plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles insulated with two-colour dual componentsleeves VDE-tested plastic dipped insulated VDE-tested
g 170 200 170 200 205
225 170 200 170 200 205
225
27
27 Telephone Pliers,
with center cutter 왘 grips and separates single wires in cable trees 왘 with center cutter for soft wire 왘 half-round jaws 왘 serrated gripping surfaces 왘 Chrome Vanadium electric steel, oil-hardened and tempered
27 01 160
2
3
47 9.5
Article-No. 9 EANLength mm
27 01 160
9 Head
9 Handles
16.5
Code g 120
4003773-
016106
polished
28
plastic coated
28 Assembly Pliers 왘 specially suitable for gripping adjusting and assembly work with a higher prehensile power 왘 serrated gripping surfaces 왘 special tool steel, oil-hardened and tempered
28 01 200
Style 0: 왘 flat, wide jaws
Style 0: flat, wide jaws
Style 2: 왘 half-round jaws
28 21 200 Style 2: half-round jaws T2
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377328 01 200 013020
9 Handles
W4
9 Dimensions L3
W3
T1
W4
T2
mm
mm
mm
mm
0
polished
plastic coated
33.0 13.5
10.5 4.0
g 10.5 200
plastic coated
33.0 13.5
10.5 4.0
10.5 200
2
chrome plated polished
plastic coated
34.0 13.5
10.5 3.0
3.0 190
L3
mm
T1 W3
28 03 200
016144
28 21 200
028246
33
29
29 Telephone Pliers
without side cutter DIN ISO 5745
왘 gripping surfaces cross cut 왘 Chrome Vanadium electric steel, oil-hardened and tempered Style 1: 왘 flat, wide jaws
29 11 160
Style 2: 왘 half-round jaws 왘 extra slim, fine tips; also suitable for soldering work
Style 1: flat, wide jaws
29 25 160 Style 2: half-round jaws Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377329 11 160 016175
29 21 160
1
9 Handles
9 Dimensions L3
W3
T1
W4
T2
mm
mm
mm
mm
polished
plastic coated
55.0 14.0
8.0
2.5
g 8.5 110
polished
plastic coated
54.0 14.0
9.0
2.0
2.0 120
chrome plated
with two-colour dual component handles
54.0 14.0
9.0
2.0
2.0 145
T2
W4
mm
L3 T1
016199
W3
2 29 25 160
043478
31
31 Grab Pliers,
Needle Nose Pliers 왘 precision pliers for very exact assembly, bending and adjusting work 왘 with extra long jaws: length of jaws 55.0 mm 왘 smooth ground gripping surfaces 왘 edges carefully deburred 왘 Chrome Vanadium electric steel, oil-hardened and tempered
31 11 160 Style 1: straight jaws
Style 1: 왘 straight jaws Style 2: 왘 45° bent jaws
31 25 160 Style 2: 45° bent jaws T2
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377331 11 160 016441 31 15 160 016465
31 21 160 31 25 160
013075 016489
1
2 45°
34
polished chrome plated polished chrome plated
9 Handles
plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles
W4
9 Dimensions L3
W3
T1
W4
T2
mm
mm
mm
mm
mm
55.0 15.0 7.5 55.0 15.0 7.5
2.0 2.0
g 2.5 100 2.5 120
55.0 15.0 7.5 55.0 15.0 7.5
2.0 2.0
2.5 100 2.5 120
L3 T1 W3
30
30 Long Nose Pliers,
without side cutter DIN ISO 5745
왘 heavy duty and wear resisting 왘 different jaw styles 왘 Chrome Vanadium electric steel, oil-hardened and tempered Style 1: 왘 long, trapezoidal jaws 왘 serrated gripping surfaces
30 11 160 Style 1: long, trapezoidal jaws serrated gripping surfaces
Style 2: 왘 long, half-round jaws 왘 serrated gripping surfaces
30 25 160 Style 2: long, half-round jaws serrated gripping surfaces
Style 3: 왘 long, round jaws 왘 smooth gripping surfaces
30 36 160 Style 3: long, round jaws smooth gripping surfaces
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377330 11 140 013037 160 013044 190 013051 30 13 140 016298 160 016304 30 15 140 042914 160 035046 190 001881 30 16 160 001904
30 21 140 160 190 30 23 140 30 25 140 160 190 30 31 140 160 30 33 160 30 35 140 160 30 36 160
016328 016335 016366 016373 001980 035060 043515 016397 013006 016434 043102 035084 002123
1
2
3
polished
9 Handles
plastic coated
chrome plated chrome plated
plastic coated
chrome plated polished
insulated with two-colour dual component handles VDE-tested plastic coated
chr. plated chrome plated
plastic coated with two-colour dual component handles
polished
plastic coated
chrome pl. chrome plated chrome plated
plastic coated with two-colour dual component handles insulated with two-colour dual component handles VDE-tested
with two-colour dual component handles
9 Dimensions L3
W3
T1
W4
T2
mm
mm
mm
mm
mm
42.0 46.5 50.0 42.0 46.5 42.0 46.5 50.0 46.5
15.0 16.5 18.5 15.0 16.5 15.0 16.5 18.5 16.5
8.0 9.5 8.0 8.0 9.5 8.0 9.5 8.0 9.5
2.5 3.0 3.0 2.5 3.0 2.5 3.0 3.0 3.0
4.0 5.0 7.0 4.0 5.0 4.0 5.0 7.0 5.0
g 90 120 140 90 120 110 150 175 155
42.0 50.0 50.0 42.0 42.0 50.0 50.0 37.5 41.0 41.0 37.5 41.0 41.0
15.0 16.5 18.5 15.0 15.0 16.5 18.5 15.0 16.5 16.5 15.0 16.5 16.5
8.0 9.5 8.0 8.0 8.0 9.5 8.0 8.0 9.5 9.5 8.0 9.5 9.5
2.5 3.0 3.0 2.5 2.5 3.0 3.0 4.0 5.0 5.0 4.0 5.0 5.0
2.0 2.5 2.4 2.0 2.0 2.5 2.4 2.0 2.5 2.5 2.0 2.5 2.5
95 125 145 95 115 155 180 85 110 110 105 140 145
T2
W4
L3 T1 W3
35
32
32 Relay Adjusting Pliers DIN 5235
32 11 135 Style 1: flat, concave and pointed jaws
왘 for gripping components and wires of the smallest diameters and for bending contact and relay springs 왘 polished gripping surfaces 왘 edges carefully deburred 왘 Chrome Vanadium electric steel, oil-hardened and tempered Style 1: 왘 flat, concave and pointed jaws Style 2: 왘 flat, wide jaws
32 21 135
Style 3: 왘 40° bent, flat, concave and trapezoidal jaws
Style 2: flat, wide jaws
32 31 135 Style 3: 40° bent, flat, concave and trapezoidal jaws T2
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377332 11 135 016496
9 Handles
W4
9 Dimensions L3
W3
T1
W4
T2
mm
mm
mm
mm
mm
L3
1
polished
plastic coated
34.0 12.5 7.0
1.4
1.5
g 75
2
polished plastic coated chrome plated polished plastic coated
34.0 12.5 7.0 34.0 12.5 7.0 32.0 12.5 7.0
1.4 1.4 1.4
3.5 3.5 3.5
75 75 75
T1 W3
32 21 135 32 23 135 32 31 135
016533 016557 016588
3 40°
33
33 Duckbill Pliers 왘 duckbill shaped jaws 9 mm wide at the tip and tapering to 1.5 mm thickness 왘 smooth gripping surfaces 왘 Chrome Vanadium electric steel, oil-hardened and tempered
33 01 160
T2
W4
L3
Article-No. 9 EANLength mm
33 01 160 33 03 160 36
9 Head
9 Handles
Code
L3
4003773-
016663 016670
polished chr. plated
plastic coated plastic coated
9 Dimensions W3
T1
W4
mm mm mm mm 55.0 15.0 7.5 3.0 55.0 15.0 7.5 3.0
T2
mm g 9.0 110 9.0 110
T1 W3
Pliers sets see page 157
34
34 Precision Electronics Gripping Pliers,
with ground screw joint
왘 the assortment for highest standard of performance and results 왘 precision pliers for ultra fine assembly work, e. g. in electronics and fine mechanics 왘 for gripping, holding and bending 왘 joint with screw: precise, zero-backlash operation of pliers 왘 precisely finished joint surfaces for smooth, low friction movement along the complete opening range 왘 low-friction double spring for gentle and even opening 왘 smooth ground gripping surfaces, edges carefully deburred 왘 non-reflective finish 왘 low weight 왘 ergonomically shaped, two-colour dual component handles; blue/grey 왘 high quality ball bearing steel, forged
34 12 130 Style 1: flat, wide jaws
34 22 130 Style 2: half-round jaws
34 12 130 ESD Style 1: flat, wide jaws
ESD version: 왘 electrically discharging version - dissipative 왘 two-colour dual component handles; black/grey
34 32 130 ESD Style 3: round, pointed jaws
Style 1: 왘 flat, wide jaws Style 2: 왘 half-round jaws Style 3: 왘 round, pointed jaws
34 12 130: location of electronic components in a vertial direction
34 22 130: positioning of components in electronics
34 22 130: half-round tips for bending and forming
Greater contact at the ball of the thumb
Article-No.
9 EANCode
9 Style all pliers with
4003773-
34 12 130 34 12 130 ESD 34 22 130 34 22 130 ESD 34 32 130 34 32 130 ESD
061458 061632 061472 061656 061496 061670
1 2 3
In the design of KNIPEX Electronics Pliers for gripping and cutting ergonomic criteria have been given particular attention. The ergonomics of the twocolour dual component handles were optimised to suit the motion sequence during precision work. The shape and material chosen allow a secure grip and fatigue reduced work. The strain on the hand is distributed over a larger surface and reduces pressure accordingly. The user still retains the sense for the work on the workpiece.
ESD When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61340-5, DIN EN 61340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.
00 20 16 P
F
9 Dimensions B mm 19,0 19,0 19,0 19,0 21,0 21,0
A mm 11,0 11,0 11,0 11,0 11,0 11,0
E
D mm 6,5 6,5 6,5 6,5 6,5 6,5
E mm 1,5 1,5 1,5 1,5 2,0 2,0
F mm 3,5 3,5 1,5 1,5 1,0 1,0
Length mm
135 135 135 135 135 135
B g 60 60 60 60 60 60
D A
37
Pliers sets see page 157
35
35 Electronics Pliers DIN ISO 9655 왘 precision pliers for ultra fine 왘 왘 왘 왘 왘
35 12 115
왘
Style 1: flat, wide jaws
왘
assembly work, e. g. in electronics and fine mechanics for gripping, holding and bending precision box joint smooth ground gripping surfaces edges carefully deburred low-friction double spring for gentle and even opening the polish or mirror polish (only finish 2) together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools special tool steel, oil-hardened and tempered
In the design of KNIPEX Electronics Pliers for gripping and cutting ergonomic criteria have been given particular attention. The result is a comfortable and user friendly adaption of the plier to the human hand.
00 20 16
35 22 115
E
F
Style 2: half-round jaws B D A
35 52 145
35 72 145
Style 3: round, pointed jaws
Style 5: long, trapezoidal jaws
Style 7: round, long jaws
E
F
35 32 115
B D
35 42 115
35 62 145
35 82 145
Style 4: 45° bent, half-round jaws
Style 6: half-round, long jaws
Style 8: 45° bent, half-round, long jaws
Article-No. 9 EANLength mm
Code
9 Style
9 Head
all pliers with
016694 035107 016724 035114 016762 035121 040736
35 52 145
039389
35 62 145
039556
35 72 145
043607
35 82 145
039396
7
D
E
F
mm
mm
mm
9.5 9.5 9.5 9.5 9.5 9.5 9.5
6.5 6.5 6.5 6.5 6.5 6.5 6.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0
4.0 4.0 1.5 1.5 1.0 1.0 1.5
g 60 75 55 70 50 60 75
long jaws
mirror polished
with two-colour dual component handles
40.0
12.0 7.5
1.5
4.0
105
long jaws
mirror polished
with two-colour dual component handles
40.0
12.0 7.5
2.5
1.5
95
long jaws
mirror polished
with two-colour dual component handles
40.0
12.0 7.5
2.5
1.3
90
long jaws
mirror polished
with two-colour dual component handles
35.0
12.0 7.5
2.5
1.0
95
33
6
A mm
22.5 22.5 22.5 22.5 22.5 22.5 22.5
22
5
B mm
plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles with two-colour dual component handles
11
4 4
9 Dimensions
polished mirror polished polished mirror polished polished mirror polished mirror polished
4003773-
35 11 115 35 12 115 35 21 115 35 22 115 35 31 115 35 32 115 35 42 115
45° 45
8 45°
38
9 Handles
A
Pliers sets see page 157
35
35 Electronics Pliers ESD 왘 precision pliers for ultra fine assembly work, e. g. in electronics and fine mechanics 왘 for gripping, holding and bending 왘 electrically discharging version – dissipative 왘 precision box joint 왘 smooth ground gripping surfaces 왘 edges carefully deburred 왘 low-friction double spring - for gentle and even opening 왘 the mirror polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 with two-colour dual component handles black/grey 왘 special tool steel, oil-hardened and tempered
35 12 115 ESD Style 1: flat, flat wide jaws
35 22 115 ESD Style 2: half-round jaws
In the design of KNIPEX Electronics Pliers for gripping and cutting ergonomic criteria have been given particular attention. The result is a comfortable and user friendly adaption of the plier to the human hand.
ESD When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and controlled to protect endangered components.
35 32 115 ESD Style 3: round, pointed jaws
00 20 17
F
E
35 42 115 ESD
B
B D
Style 4: 45° bent, half-round jaws
Article-No.
9 EAN-
Length mm
35 12 115 ESD 35 22 115 ESD 35 32 115 ESD 35 42 115 ESD
E
F
Code
9 Style
9 Head
9 Handles
all pliers with
11 2 3 2 4
45°
A
mirror polished mirror polished mirror polished mirror polished
with two-colour dual component handles with two-colour dual component handles with two-colour dual component handles with two-colour dual component handles
9 Dimensions B
4003773-
024835 024842 024859 024866
D A
A
D
E
F
mm
mm
mm
mm
mm
22.5 22.5 22.5 22.5
9.5 9.5 9.5 9.5
6.5 6.5 6.5 6.5
2.0 2.0 2.0 2.0
4.0 1.5 1.0 1.5
g 75 70 60 75
39
36
36 Electronics Mounting Pliers
36 12 130
Model 36 12 130: to bend wire in shape for the distance to the plate
36 22 125
Model 36 22 125: to bend and cut wire at 1.6 mm length below the plate
왘 precision pliers for ultra fine assembly work, e. g. in electronics and fine mechanics 왘 for bending and cutting wire ends 왘 precision box joint 왘 smooth ground gripping surfaces 왘 edges carefully deburred 왘 low-friction double spring for gentle and even opening 왘 the mirror polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 special tool steel, oil-hardened and tempered
W1
T2
Model 36 32 125: to crunch and cut wire at 1.6 mm length below the plate
36 32 125
L3 T1 W
T2
L3
Model 36 42 125 SB: to cut wire at 1.3 mm length below the plate
36 42 125 SB
Article-No. 9 EANLength mm
9 Head
9 Handles
9 Style to
Code 4003773-
36 12 130 016861 36 22 125 046967 36 32 125 016885 36 42 125 SB 029069
mirror polished
with two-colour dual component handles
bend wire shape cut at 1.6 mm and bend wire cut at 1.6 mm and crunch wire cut wire, distance 1.3 mm
T1 W
9 Dimensions L3 mm 23.0 18.0 18.0 18.0
W mm 12.0 11.5 11.5 11.5
T1 mm 7.5 7.5 7.5 7.5
W1 mm 5.5 7.0 7.0 –
T2 mm 6.0 2.6 4.0 4.0
mm g – 80 1.2 90 1.0 90 1.2 100
41
37
37 Relay Adjusting Pliers
for precision mechanics DIN ISO 9655
37 11 125 Style 1: flat, wide jaws
왘 precision pliers for ultra fine assembly work, e. g. in electronics and fine mechanics 왘 for gripping, holding, bending and adjusting 왘 tips precision ground 왘 smooth gripping surfaces 왘 edges carefully deburred 왘 lap joint 왘 Chrome Vanadium electric steel, oil-hardened and tempered
37 21 125 Style 2: flat, concave and pointed jaws
37 31 125 Style 3: half-round jaws
37 41 125 Style 4: round, pointed jaws to bend wire loops
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377337 11 125 014287 37 13 125 016922 37 21 125 014294 37 23 125 016946 37 31 125 014300 37 33 125 016960 37 41 125 014317 37 43 125 016977
42
1
2 3 4
polished chr. plated polished chr. plated polished chr. plated polished chr. plated
9 Handles
plastic coated plastic coated plastic coated plastic coated plastic coated plastic coated plastic coated plastic coated
F
9 Dimensions B
A
D
E
F
mm
mm
mm
mm
mm
27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0
12.5 12.5 12.5 12.5 12.5 12.5 14.5 14.5
7.0 7.0 7.0 7.0 7.0 7.0 8.0 8.0
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
5.5 5.5 2.0 2.0 1.6 1.6 1.0 1.0
g 70 70 75 75 65 65 75 75
E
B D A
38
38 Mechanics' Pliers DIN ISO 5745
왘 high bending strength of the plier jaws/tips 왘 Vanadium electric steel, oil-hardened and tempered
38 11 200 Style 1: straight, half-round jaws
38 15 200
Style 1: straight, half-round jaws
38 71 200 Angled jaws for easy access to confined areas
Style 7: 70° bent, half-round jaws, suitable for pulling split pins. For gripping tasks in confined areas
38 21 200 Style 2: 40° bent, half-round jaws
38 31 200
38 41 190
38 91 200
Style 3: cranked, half-round jaws
Style 4: flat, wide jaws
Style 9: 45° bent, half-round, long jaws, also suitable for gripping spark plugs and round components (spark plug cover "grabber")
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377338 11 200 016991 38 15 200 039594
1
38 21 200 38 25 200
017066 043669
2
38 31 200 38 35 200
017110 017134
3
38 41 190 017141 38 45 190 043676
4
38 71 200
7
40°
017202
9 Handles
Especially shaped jaws for easy gripping of spark plugs
9 Dimensions L3
W3
T1
W4
T2
mm
mm
mm
mm
mm
polished chrome plated polished chrome plated polished chrome plated polished chrome plated polished
plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles plastic coated
73.0 17.5 9.5 73.0 17.5 9.5
3.0 3.0
g 2.5 180 2.5 210
73.0 17.5 9.5 73.0 17.5 9.5
3.0 3.0
2.5 175 2.5 205
73.0 17.5 9.5 73.0 17.5 9.5
3.0 3.0
2.5 175 2.5 205
50.0 18.0 8.0 50.0 18.0 8.0
2.0 2.0
8.0 140 8.0 175
73.0 17.5 9.5
3.0
2.0 175
polished chrome plated
plastic coated with two-colour dual component handles
73.0 17.5 9.5 73.0 17.5 9.5
– –
2.5 180 2.5 210
T2
W4
L3 T1 W3
70°
38 91 200 38 95 200
017219 017233
9 45°
43
40
40 Universal Grip Pliers 왘 holds round, section and flat material securely 왘 heavy duty model 왘 with adjustment screw and release lever 왘 one-hand operation 왘 high clamping pressure due to toggle lever action
왘 plier body: high strength spring steel 왘 inserted jaws made from Chrome Vanadium steel, drop forged
40 04 250 Article-No. 9 EANLength mm
40 04 180 250
9 Head
9 Handles
9 Clamping width
Code 4003773-
022190 002710
nickel plated nickel plated
nickel plated nickel plated
41
mm
mm
mm
8 - 35 8 - 35
25 30
6 - 26 8 - 30
g 325 530
41 Grip Pliers
왘 holds round, section and flat material securely 왘 heavy duty model 왘 with adjustment screw and release lever 왘 one-hand operation 왘 high clamping pressure due to toogle lever action
왘 plier body: high strength spring steel 왘 inserted jaws made from Chrome Vanadium steel, drop forged
41 04 250 Style 0: jaws for round workpieces, with wire cutter
41 14 250 Style 1: jaws with double prism for round, section and flat material
Example 41 14 250
41 24 225
41 34 165
Style 2: straight jaws for flat material
Style 3: Long-Nose Grip Pliers, narrow, long jaws
Article-No. 9 EANLength mm
41 04 180 250 300 41 14 250 41 24 225 41 34 165 44
9 Style
9 Head
9 Handles
9 Clamping width
8 - 30 8 - 40 10 - 65 36 42 6.5 - 30
Code 4003773-
002741 002758 022183 023470 023487 047858
mm
0
nickel plated
nickel plated
1 2 3
nickel plated nickel plated nickel plated
nickel plated nickel plated nickel plated
mm
20 20 30 36 16 10
mm
6 - 24 8 - 30 10 - 34 13 - 36 24 6 - 24
g 360 530 930 560 505 200
42
42 Welding Grip Pliers 왘 for gripping and clamping round, section and flat material 왘 heavy duty model 왘 with adjustment screw and release lever
왘 one-hand operation 왘 high clamping pressure due to toogle lever action 왘 plier body: high strength spring steel
Model 42 14 280: 왘 heat resistant crucible cast steel jaws 왘 section or flat material items lying side by side are held securely during welding 왘 also for section material with vertical webs up to 25 mm height
42 14 280 0-25 mm
Secure fixing of metal section material for welding
Model 42 24 280: 왘 heat resistant crucible cast steel jaws 왘 round or tubular material items lying centrally side by side are held securely during welding
42 24 280
Model 42 34 280: 왘 gripping jaws of Chrome Vanadium steel, drop forged 왘 clamps cumbersome workpieces and sections with high webs up to 40 mm
42 34 280 0-40 mm
Article-No. 9 EANLength mm
42 14 280 42 24 280 42 34 280
9 Head
9 Handles
9 Clamping width
Code 4003773-
022206 022213 022220
nickel plated nickel plated nickel plated
nickel plated nickel plated nickel plated
mm
mm
30 - 65 10 - 85 -
51 90
g 915 860 700
45
45
45 Special Retaining Ring Pliers
(shafts) 왘 for fitting horseshoe-shaped spring retaining rings and circlips without grip holes 왘 for shaft retaining devices 왘 with opening spring 왘 forged 왘 Chrome Vanadium steel, oil-hardened and tempered
Model 45 10 170: 왘 for retaining rings with a minimum ring split gap of 3.6 mm
45 10 170 3.6 mm
Model 45 21 200: 왘 angled jaws with centering hole 왘 for retaining rings according to standard from 12.0 mm dia., e. g. for securing drive shaft in the gearbox of a motor vehicle 왘 minimum ring split gap of the rings 2.2 mm
45 21 200 2.2 mm
Article-No. 9 EANLength mm
45 10 170 45 21 200
9 Style
9 Head
9 Handles
Code g 155 190
4003773-
017370 031208
burnished burnished
46
46 Circlip Pliers
burnished plastic coated
45 21 200: Tips with center holes for secure fit of the retaining ring
for fitting Grip Rings (shafts) 왘 for fitting grip rings on shafts from 1.5 - 30 mm dia. 왘 with opening spring 왘 solid style, forged 왘 non-slip, solid tips 왘 Chrome Vanadium electric steel, oil-hardened and tempered
46 11 G0
Model 46 11 G0: 왘 for rings of 1.5 - 4.0 mm dia., with adjustable stop screw to prevent overstretching
46 11 G2
Article-No. 9 EANSize
9 Style
9 Head
9 Handles
4003773-
46 11 G0 G1 G2 G3 G4
9 Size of shaft
Code 047896 031062 031079 031086 031093
polished
plastic coated
mm 1.5 4 5 14 20 -
4 7 13 18 30
Length mm g 140 80 140 80 140 80 140 80 180 140
47
Pliers sets see page 155
44
44 Internal Circlip Pliers
(bore holes)
DIN 5256 C (straight) DIN 5256 D (bent)
왘 for fitting internal circlips in bore holes from 8 - 400 mm dia. 왘 solid style, forged 왘 non-slip, solid tips 왘 Chrome Vanadium electric steel, oil-hardened and tempered
44 11 J2 Style 1: straight tips
Easy fitting of internal circlips
44 21 J21 Style 2: bent tips
Models 44 10 and 44 20: 왘 for rings from 122 - 400 mm dia. 왘 with locking device, can be released 왘 with replaceable tips made of tempered steel 왘 black powder coated
44 10 J6
Article-No. 9 EAN- 9 Style Size
9 Head
9 Handles
Code 4003773-
44 11 J0 J1 J2 J3 J4 44 10 J5 J6 44 19 J5 J6 44 13 J0 J1 J2 J3 J4 44 21 J01 J11 J21 J31 J41 44 20 J51 J61 44 29 J51 J61 44 23 J11 J21 J31 48
017240 013570 013587 013594 013600 024910 024927 024934 024941 017264 017271 017288 017295 017301 017318 013617 013624 013631 013648 024958 024965 024972 024989 017332 017349 017356
1
polished
plastic coated
black powder coated
straight
2
spare tips spare tips chrome plated
polished
plastic-coated
plastic coated
black powder coated spare tips spare tips chrome plated
plastic coated
9 Size of bore ø mm 8 - 13 12 - 25 19 - 60 40 - 100 85 - 140 122 - 300 252 - 400
Length mm g 140 90 140 90 180 140 225 200 320 465 570 1710 580 1730
8 12 19 40 85 8 12 19 40 85 122 252
- 13 - 25 - 60 - 100 - 140 - 13 - 25 - 60 - 100 - 140 - 300 - 400
140 140 180 225 320 130 130 170 215 300 590 600
90 90 140 200 465 90 90 140 205 480 1980 1990
12 - 25 19 - 60 40 - 100
130 170 215
90 140 205
00 19 56
!
Loosen tight circlips before removing these.
Only use circlip pliers for the specified diameter range. We recommend wearing safety goggles when working with these pliers.
Pliers sets see page 155
46
46 External Circlip Pliers (shafts) DIN 5254 A (straight) DIN 5254 B (bent)
왘 for fitting external circlips on shafts from 3 - 400 mm dia. 왘 solid style, forged 왘 non-slip, solid tips 왘 Chrome Vanadium electricsteel, oil-hardened and tempered
46 11 A2 Style 1: straight tips Easy fitting of external circlips
46 21 A21 Style 2: bent tips Models 46 10 and 46 20: 왘 for rings from 122 - 400 mm dia. 왘 with locking device, can be released 왘 without opening spring 왘 with replaceable tips made of tempered steel 왘 black powder coated
46 10 A5
Article-No. 9 EAN- 9 Style Size
9 Head
9 Handles
Code 4003773-
46 11 A0 A1 A2 A3 A4 46 10 A5 A6 46 19 A5 A6 46 13 A0 A1 A2 A3 46 21 A01 A11 A21 A31 A41 46 20 A51 A61 46 29 A51 A61 46 23 A01 A11 A21 A31
013655 013662 013679 013686 013693 024996 025009 024316 025016 017417 017424 017431 017455 013709 013716 013723 013730 013747 025023 025030 025047 025054 017509 017516 017523 017530
1
polished
plastic coated
black powder coated
straight
spare tips spare tips chrome plated
polished
plastic coated
plastic coated
2
black powder coated spare tips spare tips chrome plated
plastic coated
9 Size of shaft ø mm 3 - 10 10 - 25 19 - 60 40 - 100 85 - 140 122 - 300 252 - 400
Length mm g 140 85 140 85 180 140 210 215 320 530 560 2020 570 2030
3 10 19 40 3 10 19 40 85 122 252
- 10 - 25 - 60 - 100 - 10 - 25 - 60 - 100 - 140 - 300 - 400
140 140 180 210 125 125 170 200 300 570 580
85 85 140 215 85 85 135 215 515 1810 1820
3 10 19 40
- 10 - 25 - 60 - 100
125 125 170 200
85 85 135 215
00 19 56
!
Loosen tight circlips before removing these.
Only use circlip pliers for the specified diameter range. We recommend wearing safety goggles when working with these pliers.
49
Pliers sets see page 155-156
48
48 Precision Internal Circlip Pliers
(bore holes)
DIN 5256 C (straight) DIN 5256 D (bent)
48 11 J2 Style 1: straight tips
48 21 J21 Style 2: bent tips
왘 for fitting circlips on bore holes, range of application from 8 - 140 mm dia. 왘 inserted tips of high density drawn spring wire 왘 heavy duty under continuous use; up to 10 times longer service life 왘 precise, smoothly-operating screw joint 왘 forged 왘 large contact faces on the tips: no distortion of circlips, easy fitting 왘 slim head style allows use in confined areas 왘 handles with non-slip plastic coating 왘 Chrome Vanadium electric steel
The new KNIPEX Precision Circlip Pliers meet highest requirements. Positive locked high density spring wire tips offer 10 times longer sevice life compared with conventional circlip pliers and high stability when loosening tight circlips. Circlips are held securely thanks to the large contact faces of the tips.
00 19 57
Sturdy, inserted tips: made from high density drawn spring wire
Article-No. 9 EAN- 9 Style Size
Circlips are held securely: large contact faces and the position of the tips make it difficult for the circlip to bounce off
9 Head
9 Handles
9 Size of bore
048510 048527 048534 048541 048558
1
grey atramentized
with non-slip plastic coating
Screw joint: high precision and optimum drive
Tips
Length
ø mm 8 - 13 12 - 25 19 - 60 40 - 100 85 - 140
ø mm 0.9 1.25 1.8 2.25 2.3
mm 140 140 180 225 320
g 100 100 180 260 580
8 12 19 40 85
0.9 1.25 1.8 2.25 3.2
130 130 165 210 305
100 100 180 260 580
Code 4003773-
48 11 J0 J1 J2 J3 J4
Slim head style: allows use in confined areas
straight
48 21 J01 J11 J21 J31 J41
50
048619 048633 048640 048657 048664
2
grey atramentized
with non-slip plastic coating
- 13 - 25 - 60 - 100 - 140
!
Loosen tight circlips before removing these.
Only use circlip pliers for the specified diameter range. We recommend wearing safety goggles when working with these pliers.
Pliers sets see page 155-156
49
49 Precision External Circlip Pliers
(shafts)
DIN 5254 A (straight) DIN 5254 B (bent)
49 11 A2 Style 1: straight tips
49 21 A21 Style 2: bent tips
왘 for fitting circlips on shafts, range of application from 3 - 140 mm dia. 왘 inserted tips of high density drawn spring wire 왘 heavy duty under continuous use; up to 10 times longer service life 왘 precise, smoothly-operating screw joint 왘 forged 왘 large contact faces on the tips: no distortion of circlips, easy fitting 왘 slim head style allows use in confined areas 왘 protected captive spring in the joint 왘 handles with non-slip plastic coating 왘 Chrome Vanadium electric steel
The new KNIPEX Precision Circlip Pliers meet highest requirements. Positive locked high density spring wire tips offer 10 times longer sevice life compared with conventional circlip pliers and high stability when loosening tight circlips. Circlips are held securely thanks to the large contact faces of the tips. The large contact areas as well as the position of the tips ensure fitting without distorsion and make it difficult for the circlip to bounce off. The opening spring is protected inside the screw joint.
Model 49 31 A0/49 41 A01: 왘 with additional limiter (continuously adjustable opening area) 왘 avoids overstretching of small external circlips
49 31 A0 Style 3: straight tips
00 19 57
Spring inside the joint: the spring is protected inside the precision screw joint. It does not hinder work and can’t get dirty or lost
Article-No. 9 EAN- 9 Style Size
49 11 A0 A1 A2 A3 A4 49 31 A0 49 21 A01 A11 A21 A31 A41 49 41 A01
all pliers 4003773- with 048718 1 048725 048732 048749 048756 3 061748 2 048817 048824 048831 straight 048848 048855 061755 4
KNIPEX Precision Circlip Pliers: fit circlips without distortion; easy and quick assembling
9 Head
9 Handles
Conventional Circlip Pliers: distortion of the circlip when being fitted is possible
grey atramentized
with non-slip plastic coating
grey atramentized
with non-slip plastic coating
9 Size of shaft
Code
ø mm 3 - 10 10 - 25 19 - 60 40 - 100 85 - 140 3 - 10 3 - 10 10 - 25 19 - 60 40 - 100 85 - 140 3 - 10
Heavy duty tips: optimum stability when loosening tight circlips
Tips ø mm 0.9 1.25 1.8 2.25 3.2 0.9 0.9 1.25 1.8 2.25 2.8 0.9
Length mm 140 140 180 225 320 140 130 130 165 210 305 130
g 100 100 180 260 595 100 100 100 180 260 595 100
49 31 A0/49 41 A01: with adjustable opening area
51
50
50 Carpenters' Pincers DIN ISO 9243
왘 for heaviest duty 왘 specially favoured by craftsmen due to precision workmanship 왘 extreme wear resistance and good balance 왘 special tool steel, oil-hardened and tempered
50 00 210
50 01 225 Article-No. 9 EANLength mm
50 00 130 160 180 210 225 250 300 50 01 130 160 180 210 225 250 300
9 Head
9 Handles
Code 4003773-
014423 013129 013136 013143 013150 013167 015710 015789 015802 016021 016052 016083 016267 016915
polished
black atramentized
polished
plastic coated
51
51 Carpenters' Pincer
g 125 210 310 400 420 580 880 140 225 325 415 435 600 900
with striking face DIN ISO 9243
왘 with striking face for driving in nails 왘 special tool steel, oil-hardened and tempered
51 01 210 Bestell-Nr. 9 EANArticle-No. Length Länge mm
51 01 210
52
Kopf 9 Head
Griffe 9 Handles
Code 4003773-
014065
poliert polished
plastic mit Kunststoff coated überzogen
g 425
Multi-functional: driving in and pulling nails
55
55 Farriers' Pincer,
Hamburg pattern DIN 5173
왘 the ideal plier for the farrier 왘 with small head and reversing groove 왘 also suitable for dismantling work in vehicle body workshops
왘 cutting edge hardness approx. 55 HRC 왘 special tool steel, oil-hardened and tempered
55 00 300 Article-No. 9 EANLength mm
55 00 300
9 Head
9 Handles
9 Head width
Code 4003773-
014072
polished
black atramentized
56
56 Farriers' Pincer,
mm 20
g 785
Vienna pattern 왘 with wide head 왘 cutting edge hardness approx. 55 HRC 왘 special tool steel, oil-hardened and tempered
Model 55 00 300: Dismantling work in car body construction
56 00 325 Article-No. 9 EANLength mm
56 00 325
9 Head
9 Handles
9 Head width
4003773-
017592
polished
black atramentized
57
57 Unsoling Pincer
mm 33
Article-No. 9 EAN-
57 00 360
9 Head
g 1020
for horse shoeing 왘 for the farrier 왘 also suitable for dismantling work in vehicle body workshops 왘 also for dismantling work on timber and metal 왘 special tool steel, oil-hardened and tempered
57 00 360
Length mm
Code
9 Handles
9 Head width
Code 4003773-
017622
polished
58
black atramentized
58 Potters' Pincers,
mm 30.5
g 1160
Brick Pincers 왘 for pottery work 왘 with wire cutter for soft wire 왘 special tool steel, oil-hardened and tempered
Model 58 10 225: 왘 head width 10 mm Model 58 30 225: 왘 head width 20 mm
58 10 225 Article-No. 9 EANLength mm
58 10 225 58 30 225
9 Head
9 Handles
9 Head width
Code 4003773-
017646 014331
polished polished
black atramentized black atramentized
mm 10 20
g 345 350
53
99
99 Concretors' Nippers,
Tower Pincers / Steel Fixers Nippers DIN ISO 9242
99 00 280
왘 to twist and cut wire in one operation: fast, reliable and economical 왘 unobtained precision and long service life make these the most widely purchased concretors' nippers in the world 왘 special tool steel, oil-hardened and tempered
Model 99 00 220 K12: 왘 with 12 mm head, particularly suitable for tile paving work
99 01 220 Article-No.
9 EAN-
Length mm
9 Head
9 Handles
Code g 235 320 400 405 510 250 340 425 485 555 320
4003773-
99 00 200 220 250 280 300 99 01 200 220 250 280 300 99 00 220 K12
014393 013273 013280 014096 014409 021452 021469 021483 021490 014416 027812
polished
black atramentized
polished
plastic coated
polished
black atramentized
99
99 High Leverage Concretors' Nippers, DIN ISO 9242
99 14 300
99 10 300
high lever transmission
왘 to twist and cut thicker wire in one operation: fast, reliable and economical 왘 very slim shape for tying submerged positioned steel rods 왘 cutting capacity: binding wire up to max. 4.5 mm dia. 왘 particularly high cutting capacity with minimum effort due to optimum transmission ratio 왘 high damping of the cutting stroke after cutting the binding wire, which reduces strain on tendons and muscles 왘 special tool steel, oil-hardened and tempered
KNIPEX High Leverage Concretors' Nippers offer substantially higher cutting performance as well as a damping of the cutting stroke after cutting the binding wire - two valuable ergonomical advantages for the user.
Requires 27% less effort. Cutting a binding wire of 3.0 mm dia. with a High Leverage Concretors' Nipper requires handforce of only 300 N (30.0 kp) instead of 412 N (41.2 kp) with a common Concretors' Nipper of the same length.
99 11 300 Article-No. 9 EANLength mm
99 10 300 99 11 300 99 14 300
9 Head
9 Head width
9 Handles
9 Capacitiy
Code 4003773-
022398 023210 028116
mm polished 25 polished 25 nickel plated 25
black atramentized plastic coated nickel plated
ø mm 4.5 4.5 4.5
g 475 510 475
Quick and comfortable twisting and cutting of binding wire
55
61
61 Bolt End Cutting Nipper 왘 better handling, greater capacity and lower handforce required compared to conventional bolt end cutting nippers 왘 with cutting edges for soft, hard and piano wire 왘 particularly high cutting capacity with minimum effort due to optimum transmission ratio 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 forged 왘 Vanadium electric steel, oil-hardened and tempered
61 01 200
KNIPEX Bolt End Cutting Nippers are clearly lighter in weight and more comfortable in use than conventional Bolt End Cutting Nippers — nevertheless they offer a higher cutting performance.
Four advantages compared with conventional Lever Action End Cutting Nippers of the same size
왘 high cutting performance: e. g. piano wire up to 3.0 mm dia. Particularly efficient for fence construction
Flush cutting of bolts, nails, etc.
Article-No. 9 EAN- 9 Head
9 Handles
Length Code mm 400377361 01 200 026723 polished
9 Cutting capacities
ø mm ø mm ø mm ø mm g 1.0 - 6.0 4.0 3.5 3.0 max. 460
plastic coated
62
왘 easier cutting: thanks to high leverage
High cutting performance: also for piano wire
왘 handy: compact design, reduced weight 왘 smooth operation, less friction: single joint instead of toggle lever technique
62 Electronics Oblique Cutting Nipper DIN ISO 9654
62 12 120
Article-No. 9 EAN- 9 Style 9 Head Länge Code mm 400377362 12 120 048008
9 Handles
왘 with cutting edges for soft and medium hard wire 왘 without bevel, for flush cutting 왘 cutting edge hardness approx. 58 HRC 왘 low-friction double spring for gentle and even opening 왘 precision box joint 왘 the polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 9 Cutting capacities
왘 special tool steel, oil-hardened and tempered
17 15°
11 10
7.5
polished
with two-colour dual component handles
ø mm 0.3 - 1.0
ø mm 0.7
g 90
57
64
C
A
64 Electronics End Cutting Nippers DIN ISO 9654
64 01 115 Style 0: End Cutter, with bevel
64 02 115 Style 0: End Cutter, with bevel
64 12 115
64 52 115
Style 1: End Cutter, with small bevel
Style 5: Oblique End Cutter, short head, without bevel, for flush cutting, α = 27°
왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 precision box joint 왘 low-friction double spring for gentle and even opening 왘 the polish or mirror polish (only finish 2) together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 cutting edge hardness at least 56 HRC 왘 special tool steel, oil-hardened and tempered
B D
64 12 115 C B D
A
64 22 115 A
C
B
64 22 115 64 22 115
64 62 120
Style 2: End Cutter, mini-blade with small bevel
Style 6: Oblique End Cutter, mini-blade with small bevel, α = 65°
D
64 62 120
differently shaped jaws and mini-blades for flush cutting in confined areas
C
64 32/42/52 115 C
64 32 120
64 72 120
Style 3: Oblique End Cutter, short head, with small bevel, α = 15°
Style 7: Oblique End Cutter, mini-blade with small bevel, head with recess, α = 35°
␣
␣
B
B D
A
D A
64 42 115 Style 4: Oblique End Cutter, short head, with small bevel, α = 27° Article-No. 9 EAN- 9 Style Length Code all pliers with mm 400377364 01 115 017745 0 64 02 115 035343
64 11 115 64 12 115 64 22 115 64 32 120 64 42 115 64 52 115 64 62 120 64 72 120 58
017769 040743 017806 017820 017844 040439 046998 017882
1 2 3 4 5 6 7
64 72 120 9 Head
polished mirror polished polished mirror polished
64 72 120
9 Handles
plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles
Pliers sets see page 157
64 62 120 9 Dimensions B A
9 Cutting capacities D
C
mm 6.0 6.0
mm 11.0 11.0
mm 7.5 7.5
mm 16.0 16.0
ø mm 2.0 2.0
ø mm 1.0 1.0
ø mm g 0.6 80 0.6 90
6.0 6.0 20.0 10.0 10.3 10.0 18.5 19.5
11.0 11.0 10.0 11.0 10.0 10.0 9.5 12.0
7.0 7.0 6.0 7.0 7.0 7.0 6.0 7.0
16.0 16.0 3.0 17.0 12.0 12.0 5.0 5.0
1.4 2.0 0.8 1.5 1.5 1.3 0.6 1.5
0.8 0.8 1.0 1.0 -
0.5 0.5 0.5 -
80 90 70 90 70 70 70 90
Pliers sets see page 157
64
64 Electronics End Cutting Nippers ESD DIN ISO 9654
64 12 115 ESD Style 1: End Cutter, with small bevel
64 32 120 ESD Style 3: Oblique End Cutter, with small bevel, α = 15°
ESD
왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 electrically discharging version - dissipative 왘 precision box joint 왘 low-friction double spring for gentle and even opening 왘 the mirror polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 cutting edge hardness at least 56 HRC 왘 with two-colour dual component handles, black/grey 왘 special tool steel, oil-hardened and tempered
When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.
00 20 17
64 62 120 ESD Style 6: Oblique End Cutter, mini-blade with small bevel, α = 65° Article-No. Length mm
9 EAN- 9 Style Code
9 Head
9 Handles
9 Dimensions B A
all pliers with
mm 6.0 10.0 18.5
4003773-
64 12 115 ESD 024323 1 64 32 120 ESD 025078 3 64 62 120 ESD 025085 6
mirror polished
67
with two-colour dual component handles
mm 11.0 11.0 9.5
9 Cutting capacities D
C
mm 7.0 7.0 6.0
mm 16.0 17.0 5.0
ø mm 2.0 1.5 0.6
ø mm 0.8 1.0 -
ø mm 0.5 0.5 -
g 90 90 70
67 High Leverage End Cutting Nippers DIN ISO 5748
67 01 200
왘 with cutting edges for soft, hard and piano wire 왘 high cutting capacity with little effort due to optimum coordination of cutting edge angle and transmission ratio 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered
67 05 200 Article-No. 9 EANLength Code mm 400377367 01 140 013761 160 013778 200 013785 67 05 140 017929 160 017936 200 017943
9 Head
9 Handles
polished
plastic coated
chrome plated
with two-colour dual component handles
9 Cutting capacities ø mm 4.0 4.0 4.0 4.0 4.0 4.0
ø mm 3.1 3.4 4.2 3.1 3.4 4.2
ø mm 2.0 2.5 3.0 2.0 2.5 3.0
ø mm 1.5 2.0 2.5 1.5 2.0 2.5
Induction hardened precision blades also suitable for piano wire
g 145 240 330 180 275 375
59
68
68 End Cutting Nippers DIN ISO 5748
68 01 200
Article-No. 9 EANLength Code mm 400377368 01 160 013792 180 013808 200 013815
9 Head
polished
9 Handles
plastic coated
69
왘 with cutting edges for soft and hard wire 왘 also suitable for twisting and cutting binding wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 high grade special tool steel, oil-hardened and tempered
9 Cutting capacities
ø mm ø mm ø mm 4.0 2.8 2.3 4.0 3.2 2.5 4.0 3.5 2.8
g 195 275 335
Also suitable for wire netting in reinforced concrete construction
69 Mechanics End Cutting Nippers DIN ISO 5748
69 01 130
왘 with cutting edges for soft, hard and piano wire; also suitable for thin copper wires 왘 lap joint 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered
20
Article-No. 9 EAN-
9 Head
polished
69 03 130
chrome plated
60
7.5
9 Cutting capacities
10
Length Code mm 400377369 01 130 017974 018001
9 Handles
plastic coated
ø mm ø mm ø mm ø mm 0.4 - 2.0 1.3 1.0 0.75
g 115
plastic coated
0.4 - 2.0 1.3
115
1.0
0.75
16
70
70 Diagonal Cutters DIN ISO 5749
70 01 160
70 02 160
왘 the indispensable diagonal cutter for all-round use 왘 high quality material and precise workmanship for long service life 왘 precision cutting edges for soft and hard wire 왘 clean cutting at cutting edge tips; also in case of thin copper wires 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC 왘 narrow head style for use in confined areas 왘 Vanadium electric steel, oil-hardened and tempered
The cutting edges of KNIPEX Diagonal Cutters – made of Vanadium steel – have a long service life, are machined highly precise and are very sharp – for a clean cut of soft and hard wires.
Style 0: 왘 with bevel Style 1: 왘 with bevel 왘 with opening spring
70 05 160
Style 2: 왘 with small bevel
70 06 160
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377370 01 110 014324 125 013402 140 013419 160 013426 180 018070 70 02 125 034025 140 023098 160 034032 180 034049 70 04 140 018100 70 05 125 039501 140 039488 160 039600 180 043706 70 06 125 018124 140 040293 160 021995 180 033813 70 07 160 018155 180 018179 70 11 110 018193 70 15 110 029649
70 26 160
018223
0
1
2
9 Handles
polished
plastic coated
polished
with two-colour dual component handles
chr. plated chrome plated
chrome plated with two-colour dual component handles
chrome plated
insulated with two-colour dual component handles
chrome plated polished chrome plated chrome plated
VDE-tested plastic dipped insulated VDE-tested plastic coated with two-colour dual component handles insulated with two-colour dual component handles
9 Cutting capacities
ø mm ø mm ø mm 3.0 2.0 1.2 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 4.0 2.5 1.8 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 4.0 2.8 2.0 4.0 3.0 2.5 3.0 2.0 1.2 3.0 2.0 1.2
g 80 90 125 175 200 115 155 205 250 105 115 155 205 250 120 160 210 255 240 285 80 105
4.0
VDE-tested
210
Cuts fine wires cleanly over the complete length of the blades
Slim head style and precise cut at blade tips: Advantageous when working in confined areas
61
71
71 KNIPEX-”CoBolt”,
Compact Bolt Cutters (Lever Action Center Cutters) 왘 with precision blades for soft, hard and piano wire 왘 cuts material like bolts, nails, rivets, etc. up to 5.2 mm dia. 왘 exceptional cutting performance with minimum effort because of new lever action design 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 forged 왘 Chrome Vanadium electric steel, oil-hardened and tempered
patented
71 01 200
71 02 200
Style 3: 왘 the recess in the blade allows easier cutting of thicker wires, e. g. for false ceilings
71 11 200
The KNIPEX Compact Bolt Cutter is a "clever muscle man". The newly designed lever action mechanism guarantees an extremely favourable lever ratio with low friction. The cutting performance is 20 times higher than the handforce applied.
Requires 61% less effort. Cutting a piano wire of 2.0 mm dia. with the KNIPEX-"CoBolt" requires handforce of 192 N (19.2 kp) instead of 499 N (49.9 kp) with a High Leverage Diagonal Cutter of the same length.
Style 1: 왘 with opening spring and stirrup lock Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377371 01 200 010067
0
9 Handles
atramentized
plastic coated
atramentized
71 02 200
047056
71 11 200
022312
1
atramentized
with two-colour dual component handles plastic coated
71 31 200
030805
3
atramentized
plastic coated
9 Cutting capacities ø mm ø mm ø mm ø mm 6.0 5.2 4.0 3.6
g 340
6.0
5.2
4.0
3.6
380
6.0
5.2
4.0
3.6
350
6.0
5.2
4.0
3.6
340 71 31 200: The recess near the joint keeps thicker wires to be cut in a secure position, ensuring optimum application of cutting performance
72
72 Diagonal Cutter
for fibre optics (Glass Fibre Cable) 왘 specially developed for cutting glass fibre cable (fibre optics) 왘 cutting face flush ground 왘 cutting edges additionally induction hardened 왘 with opening spring 왘 Vanadium electric steel, oil-hardened and tempered
72 51 160
Article-No. 9 EANLength mm
72 51 160 62
9 Head
9 Handles
Code 4003773-
028031
polished
plastic coated
g 170
72
72 Diagonal Cutters
for plastics and lead 왘 cutting face flush ground 왘 non-bevelled, for flush cutting sprues off plastic components or soft materials such as lead 왘 with opening spring 왘 Vanadium electric steel, oil-hardened and tempered
72 01 160
72 11 160 Style 1: 45° angled blades
72 21 160 Style 2: 85° angled blades Article-No. 9 EANLength mm
Code
9 Style
9 Head
9 Handles
all pliers with
72 01 140 160 180 72 02 125 72 11 160
018247 013389 028482 044215 018261
0
polished
plastic coated
1
polished polished
with two-colour dual component handles plastic coated
g 115 170 200 95 150
72 21 160
026914
12
polished
plastic coated
160
4003773-
45° 85°
74
74 Center Cutter 왘 with forged-on axle for heaviest duty 왘 with precision cutting edges for soft, hard and piano wire 왘 cuts hard, thick wires with less effort than other diagonal cutters of the same length 왘 centric precision cutting edges 왘 high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape
74 91 250
왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered
fixed, forged-on axle
Article-No. 9 EANLength Code mm 400377374 91 250 013396
9 Head
polished
9 Handles
plastic coated
9 Cutting capacities ø mm ø mm ø mm ø mm 5.0 5.0 3.8 3.5
g 395
The cutting edges are in the center of the cutter head
63
74
74 High Leverage Diagonal Cutters DIN ISO 5749
74 01 200
74 12 180
74 06 200
왘 with forged-on axle for heaviest duty 왘 suitable for all types of wire including piano wire 왘 high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape 왘 precision cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 the 250-mm-long diagonal cutter is suitable for copper conductors up to 16 mm2 and aluminium conductors up to 35 mm2 왘 Chrome Vanadium electric steel, oil-hardened and tempered Style 1: 왘 with opening spring; to be activated if required
fixed, forged-on axle
5 70 mm
The choice of material (Chrome Vanadium), lever ratio and cutting edge angle mean that KNIPEX High Leverage Diagonal Cutters are particularly designed for the cutting of hard wires. Fixed, forged-on axle for work under continuous stress.
Requires 21% less effort. Cutting a medium hard wire of 2.5 mm dia. with a High Leverage Diagonal Cutter (length 160 mm) requires an handforce of only 293 N (29.3 kp) instead of 370 N (37.0 kp) with a common Diagonal Cutter of the same length.
Style 2: 왘 12° angled head for flush cutting, providing space for gripping
74 21 200
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377374 01 140 013433 polished 160 013440 180 013457 200 013464 250 013471 74 02 140 042419 polished 160 023081 180 023074 200 040309 250 042402 74 05 140 039617 chrome 160 022961 plated 180 022978 200 035367 250 039754 74 06 160 040705 chrome 180 022985 plated 200 033820 250 041955 74 07 200 018414 chrome 250 018421 plated 74 12 160 065111 1 polished 74 12 180 060192 polished 74 21 160 034322 2 polished 74 21 200 034636 12° polished 74 22 200 051831 polished
64
9 Handles
plastic coated
with two-colour dual component handles
with two-colour dual component handles
insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested with two-colour dual component handles plastic coated plastic coated with two-colour dual component handles
9 Cutting capacities ø mm 3.1 3.4 3.8 4.2 4.6 3.1 3.4 3.8 4.2 4.6 3.1 3.4 3.8 4.2 4.6 3.4 3.8 4.2 4.6 4.2 4.6 3.4 3.8 3.4 4.2 4.2
ø mm 2.0 2.5 2.7 3.0 3.5 2.0 2.5 2.7 3.0 3.5 2.0 2.5 2.7 3.0 3.5 2.5 2.7 3.0 3.5 3.0 3.5 2.5 2.7 2.5 3.0 3.0
ø mm 1.5 2.0 2.2 2.5 3.0 1.5 2.0 2.2 2.5 3.0 1.5 2.0 2.2 2.5 3.0 2.0 2.2 2.5 3.0 2.5 3.0 2.0 2.2 2.0 2.5 2.5
g 130 180 220 260 390 160 210 255 300 420 160 210 255 300 420 215 260 305 440 340 475 210 255 180 260 300
74 12 180: The opening spring can be activated by simply pressing with the thumb
74 12 180: View of the rear side with activated opening spring
Pliers sets see page 157
75
75 Electronics Diagonal Cutters,
slim pattern
DIN ISO 9654
75 02 125 screw joint
Style 0: 왘 with bevel
75 12 125
Style 1: 왘 with bevel and lead catcher (can be unscrewed), no uncontrolled loss of cut wire ends
Style 2: 왘 with small bevel
Style 5: 왘 particularly narrow head, with bevel
Style 3: 왘 with small bevel and lead catcher (can be unscrewed), no uncontrolled loss of cut wire ends
75 52 125 Article-No. 9 EAN- 9 Style Length Code mm 400377375 02 125 040491 75 12 125 040514 75 22 125 040538 75 32 125 040552 75 52 125 040576
왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 with precision cutting edges for soft and hard wire, also suitable for thin piano wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 low-friction double spring for gentle and even opening 왘 high grade special tool steel, oil-hardened and tempered
9 Head
9 Handles
9 Cutting capacities
KNIPEX Electronics Diagonal Cutters are suitable for work in confined areas due to their slim head. Their precise cutting edges can also cut thin piano wire.
6.5
10.5
14.0
all pliers
0 1 2 3 5
burnished with plastic handles
76
ø mm 0.2 - 1.3 0.2 - 1.3 0.2 - 1.3 0.2 - 1.3 0.2 - 1.0
ø mm 1.0 1.0 1.0 1.0 0.6
ø mm ø mm 0.6 0.4 0.6 0.4 0.4 0.4 0.4 0.4 0.5 0.3
g 80 80 80 90 85
76 Electro-Mechanics' Diagonal Cutters DIN ISO 5749 왘 with precision cutting edges for soft, hard and piano wire; also suitable for thin copper wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 63 HRC 왘 lap joint 왘 Vanadium electric steel, oil-hardened and tempered
76 01 125
Style 1: 왘 with bevel 왘 low-friction double spring for gentle and even opening Style 2: 왘 without bevel for flush cutting of soft wires 왘 low-friction double spring for gentle and even opening Style 8: 왘 particularly tapered head with small bevel for work in confined areas (cable harnesses, multiple strand wires)
Style 0: 왘 with bevel
76 05 125
9.0
Article-No. 9 EAN- 9 Style Length mm 400377376 01 125 018490 76 03 125 018506 76 05 125 005315 76 12 125 048015 76 22 125 048022 76 81 125 018544
9 Head
9 Handles
9 Cutting capacities
Code
0
1 2 8
polished chr. pl. chr. pl. polished polished polished
plastic coated plastic coated with two-colour dual component handles plastic coated
14.5
16.0
ø mm ø mm ø mm ø mm g 0.4 - 2.5 1.8 1.0 0.6 90 0.4 - 2.5 1.8 1.0 0.6 90 0.4 - 2.5 1.8 1.0 0.6 115 0.4 - 2.5 1.8 1.0 0.6 110 0.4 - 2.5 110 0.4 - 1.3 1.0 0.6 90
65
Pliers sets see page 157
77
77 Electronics Diagonal Cutters DIN ISO 9654
77 01 115 Style 0: round head, with bevel
77 02 115
왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 precision box joint 왘 low-friction double spring for gentle and even opening 왘 the polish or mirror polish (only finish 2) together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC 왘 special tool steel, oil-hardened and tempered Models 77 22 115, 77 42 115, 77 42 130 and 77 52 115: 왘 cutting edges hardness approx. 57 HRC
Style 0: round head, with small bevel
Models 77 21 115: 왘 pointed head, without bevel
77 32 115 Style 3: pointed head, with small bevel
77 42 115 Style 4: pointed head, without bevel
77 52 115 Style 5: pointed, flat head, with small bevel
Models 77 21 130: 왘 round head, without bevel
77 12 115 Style 1: round head, with bevel and lead catcher - no uncontrolled loss of cut wire ends
77 72 115 Style 7: pointed mini-head, with small bevel D
A
B
77 12 115
77 22 115
00 20 16
Style 1: round head, without bevel Article-No. 9 EAN- 9 Style Length Code mm 400377377 01 115 018568 130 018575 77 02 115 039334 130 039341 77 11 115 018629 77 12 115 043768 77 21 115 018650 130 018667 77 22 115 043782 130 040446 77 32 115 044307 77 42 115 039761 130 018773 77 52 115 040750 77 72 115 040958
66
9 Head
9 Handles
all pliers with 0
1 2
polished
plastic coated
mirror polished
with two-colour dual component handles plastic coated two-colour dual component handles with two-colour dual component handles with two-colour dual component handles two-colour dual component handles with two-colour dual component handles two-colour dual component handles two-colour dual component handles
polished mirror polished mirror polished mirror polished
3 4
mirror polished mirror polished
5 7
mirror polished mirror polished
9 Dimensions B A mm 14.0 18.0 14.0 18.0 14.0 14.0 14.0 18.0 14.0 18.0 14.0 14.0 18.0 14.0 10.5
mm 11.0 15.0 11.0 15.0 11.0 11.0 11.0 15.0 11.0 15.0 11.0 11.0 15.0 11.0 9.5
9 Cutting capacities D mm 7.5 9.5 7.5 9.5 7.5 7.5 7.5 9.5 7.5 9.5 7.5 7.5 9.5 7.5 6.5
ø mm 0.3 - 1.6 0.3 - 2.0 0.3 - 1.6 0.3 - 2.0 0.3 - 1.6 0.3 - 1.6 0.3 - 1.3 0.3 - 1.6 0.3 - 1.3 0.3 - 2.0 0.3 - 1.3 0.3 - 1.3 0.3 - 1.6 0.3 - 1.0 0.3 - 0.8
ø mm 1.2 1.5 1.2 1.5 1.2 1.2 1.0 1.3 1.0 1.5 1.2 1.0 1.3 0.8 -
ø mm 0.5 0.8 0.5 0.8 0.5 0.5 0.5 0.5 0.5 -
g 70 110 80 125 70 80 70 115 85 120 80 85 125 80 70
Pliers sets see page 157
77
77 Electronics Diagonal Cutters ESD DIN ISO 9654
77 02 115 ESD Style 0: round head, with small bevel
77 12 115 ESD Style 1: round head, with bevel and lead catcher - no uncontrolled loss of cut wire ends
왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 electrically discharging version - dissipative 왘 precision box joint 왘 low-friction double spring for gentle and even opening 왘 the mirror polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC 왘 with two-colour dual component handles, black/grey 왘 special tool steel, oil-hardened and tempered Models 77 22 115 ESD, 77 42 115 ESD and 77 52 115 ESD: 왘 cutting edges hardness approx. 57 HRC
ESD When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.
D
A
77 12 115 B
77 22 115 ESD Style 2: round head, without bevel
00 20 17
77 32 115 ESD
77 42 115 ESD
77 52 115 ESD
77 72 115 ESD
Style 3: pointed head, with small bevel
Style 4: pointed head, without bevel
Style 5: pointed, flat head, with small bevel
Style 7: pointed mini-head, with small bevel
Article-No. Length mm
77 02 115 ESD 77 12 115 ESD 77 22 115 ESD 77 32 115 ESD 77 42 115 ESD 77 52 115 ESD 77 72 115 ESD
9 EAN- 9 Style Code
9 Head
9 Handles
all pliers with
4003773-
025092 025108 025115 025122 031901 025139 024330
0 1 2 3 4 5 7
rund rund rund spitz spitz spitz mini spitz
mirror polished
with two-colour dual component handles
9 Dimensions B mm 14.0 14.0 14.0 14.0 14.0 14.0 10.5
A mm 11.0 11.0 11.0 11.0 11.0 11.5 9.5
9 Cutting capacities D mm 7.5 7.5 7.5 7.5 7.5 7.5 6.5
ø mm ø mm ø mm 0.3 - 1.6 1.2 0.5 0.3 - 1.6 1.2 0.5 0.3 - 1.3 1.0 0.3 - 1.3 1.2 0.5 0.3 - 1.3 1.0 0.3 - 1.0 0.8 0.5 0.3 - 0.8 -
g 80 75 85 80 85 80 70
67
78
78 Electronics Super-Knips DIN ISO 9654
78 03 125
왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 precision shaped tips also cut close sitting wire from 0.2 mm dia. 왘 joint with stainless steel rivet 왘 extremely smooth movement for minimum operator fatigue 왘 with opening spring and restricted opening
KNIPEX Super-Knips have precision ground cutting edges for clean, flush cutting. The very smooth joint and the opening spring provide high operation comfort.
Style 0; 1; 2: 왘 INOX - stainless steel 왘 cutting edge hardness approx. 54 HRC
78 13 125
78 23 125 Style 2: 왘 with 60° angled blades Style 3; 4; 6; 7; 8; 9: 왘 special tool steel Angled blades for clean cut also in confined areas
Style 3; 4: 왘 cutting edge hardness approx. 60 HRC
78 31 125 B
Style 1; 4; 7; 9: 왘 with lead catcher - no uncontrolled loss of cut wire ends
78 41 125
D A
Style 6; 7; 8; 9: 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC
78 71/91 125
Style 0; 1; 2; 4; 4; 6; 7: 왘 precision-ground cutting edges without bevel for flush cutting
Modell 78 61 125: 왘 also suitable for cutting glass fibre cables (fibre optics)
78 61/81 125
Article-No. 9 EAN- 9 Style Length Code mm 400377378 03 125 035381 78 13 125 035398 78 23 125 043096 78 31 125 039778 78 41 125 040767 78 61 125 035404 78 71 125 043799 78 81 125 065074 78 91 125 065081
68
9 Head
60° 60°
stainless steel stainless steel stainless steel burnished burnished burnished burnished burnished burnished
B D A
Style 8; 9: 왘 precision ground cutting edges with very small bevel suitable also for hard wire
9 Handles
all pliers with
00 11 22 33 44 65 76 88 96
60°
with two-colour dual component handles
9 Dimensions B mm 9.0 9.0 5.5 9.0 9.0 9.0 9.0 9.0 9.0
A mm 13.5 13.5 13.5 12.5 12.5 13.5 13.5 13.5 13.5
9 Cutting capacities D mm 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
ø mm ø mm ø mm 0.2 - 1.6 1.0 0.2 - 1.6 1.0 0.2 - 1.0 0.6 0.2 - 1.0 0.2 - 1.0 0.2 - 1.6 1.2 0.2 - 1.6 1.2 0.2 - 1.6 1.2 0.6 0.2 - 1.6 1.2 0.6
g 45 50 45 50 50 45 50 45 50
78
78 Electronics Super-Knips ESD DIN ISO 9654
78 03 125 ESD
78 13 125 ESD
왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 electrically discharging version - dissipative 왘 precision-ground cutting edges without bevel for flush cutting 왘 precision shaped tips also cut close sitting wire from 0.2 mm dia. 왘 joint with stainless steel rivet 왘 extremely smooth movement for minimum operator fatigue 왘 with opening spring and restricted opening 왘 with two-colour dual component handles black/grey Style 0; 1: 왘 INOX - stainless steel 왘 cutting edge hardness approx. 54 HRC Style 1; 7: 왘 with lead catcher - no uncontrolled loss of cut wire ends
78 61 125 ESD
Style 6; 7: 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 special tool steel, burnished
Length mm
78 03 125 ESD 78 13 125 ESD 78 61 125 ESD 78 71 125 ESD
9 EAN- 9 Style Code
9 Head
9 Handles
all pliers with
4003773-
025146 025153 025184 025191
0 1 6 7
1 7
stainless steel stainless steel burnished burnished
with two-colour dual component handles
ESD When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.
78 71 125 ESD
Article-No.
KNIPEX Super-Knips have precision ground cutting edges for clean, flush cutting. The very smooth joint and the opening spring provide high operation comfort.
9 Dimensions B mm 9.0 9.0 9.0 9.0
A mm 13.5 13.5 13.5 13.5
D mm 7.5 7.5 7.5 7.5
9 Cutting capacities
ø mm ø mm ø mm 0.2 - 1.6 1.0 0.2 - 1.6 1.0 0.2 - 1.6 1.2 0.6 0.2 - 1.6 1.2 0.6
g 45 45 45 50
B D A
69
Pliers sets see page 157
79
79 Precision Electronics Diagonal Cutters, with ground head and screw joint
DIN ISO 9654
79 02 125 round head with very small bevel
79 32/52 125 pointed head, with very small bevel
79 02 120
79 22 120
mini-head, with very small bevel
mini-head, without bevel
79 22 125
79 42/62 125
round head, without bevel
pointed head, without bevel
왘 the assortment for highest standard of performance and results 왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 precisely ground, sharp cutting edges with very small bevel for exact cutting on delicate components; also without bevel for flush cutting 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 joint with screw: precise, zero-backlash operation of pliers 왘 precisely finished joint surfaces for smooth, low friction movement along the complete opening range 왘 low-friction double spring for gentle and even opening 왘 non-reflective finish 왘 low weight 왘 ergonomically shaped, twocolour dual component handles; blue/grey 왘 high quality ball bearing steel, forged Model 79 02 120: 왘 mini-head, with very small bevel Model 79 02 125: 왘 round head with very small bevel
79 22 120: mini-head with bevel for flush cutting
Model 79 22 120: 왘 mini-head, without bevel
00 20 16 P
In the design of KNIPEX Electronics Pliers for gripping and cutting ergonomic criteria have been given particular attention. The ergonomics of the twocolour dual component handles were optimised to suit the motion sequence during precision work. The shape and material chosen allow a secure grip and fatigue reduced work. The strain on the hand is distributed over a larger surface and reduces pressure accordingly. The user still retains the sense for the work on the workpiece.
D
A
Model 79 22 125: 왘 round head, without bevel
B
Model 79 32 125: 왘 pointed head, with very small bevel
79 52/62 125
Model 79 42 125: 왘 pointed head, without bevel Greater contact at the ball of the thumb
Article-No. 9 EAN- 9 Style Length Code all pliers with mm 400377379 02 120 061403 mini-head 0 79 02 125 061281 rund head round 79 22 120 061427 mini-head 2 79 22 125 061342 head round 79 32 125 061366 spitz 3 79 52 125 065135 head pointed 79 42 125 061380 4 79 62 125 065142 head pointed
70
9 Head
9 Handles
polished
with two-colour dual component handles
polished
with two-colour dual component handles
polished
with two-colour dual component handles with two-colour dual component handles
polished
9 Dimensions
9 Cutting capacities
B mm 6.5
A mm 9.0
D mm 6.5
ø mm ø mm ø mm 0.2 - 1.0 0.55 0.3
g 60
10.0 6.5
11.0 9.0
6.5 6.5
0.2 - 1.5 0.80 0.1 - 0.8 0.40
0.5 -
60 60
10.0 11.0
11.0 11.0
6.5 6.5
0.1 - 1.2 0.65 0.2 - 1.3 0.70
0.4
60 60
11.0
11.0
6.5
0.1 - 1.0 0.55
-
60
Pliers sets see page 157
79
79 Precision Electronics Side Cutters ESD, with ground head and screw joint
DIN ISO 9654
79 02 125 ESD round head with very small bevel
79 32/52 125 ESD pointed head, with very small bevel
79 02 120 ESD
79 22 120 ESD
mini-head, with very small bevel
mini-head, without bevel
79 22 125 ESD
79 42/62 125 ESD
round head, without bevel
pointed head, without bevel
왘 the assortment for highest standard of performance and results 왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 precisely ground, sharp cutting edges with very small bevel for exact cutting on delicate components; also without bevel for flush cutting 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 electrically discharging version - dissipative 왘 joint with screw: precise, zerobacklash operation of pliers 왘 precisely finished joint surfaces for smooth, low friction movement along the complete opening range 왘 low-friction double spring for gentle and even opening 왘 non-reflective finish 왘 low weight 왘 ergonomically shaped, twocolour dual component ESD handles, black/grey 왘 high quality ball bearing steel, forged Model 79 02 120 ESD: 왘 mini-head, with very small bevel
When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61340-5, DIN EN 61340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.
79 32 125 ESD: pointed head for optimum access in confined areas for the removal of components
Model 79 02 125 ESD: 왘 round head with very small bevel
00 20 16 P ESD
ESD
D
Model 79 22 120 ESD: 왘 mini-head, without bevel
A
Model 79 22 125 ESD: 왘 round head, without bevel 79 52/62 125 ESD
Model 79 32 125 ESD: 왘 pointed head, with very small bevel Model 79 42 125 ESD: 왘 pointed head, without bevel
Greater contact at the ball of the thumb
Article-No. Length mm
B
9 EAN- 9 Style Code
9 Head
9 Handles
all pliers with
4003773-
79 02 120 ESD
061595
79 02 125 ESD 79 22 120 ESD
061519 061618
79 22 125 ESD 79 32 125 ESD 79 52 125 ESD 79 42 125 ESD 79 62 125 ESD
061533 061557 065159 061571 065166
mini-head
polished
with two-colour dual component handles
head round mini-head
polished
with two-colour dual component handles
polished
with two-colour dual component handles with two-colour dual component handles
0
2 head round 3 head pointed 4 head pointed
polished
9 Dimensions
9 Cutting capacities
B mm 6.5
A mm 9.0
D mm 6.5
ø mm ø mm ø mm 0.2 - 1.0 0.55 0.3
g 60
10.0 6.5
11.0 9.0
6.5 6.5
0.2 - 1.5 0.80 0.1 - 0.8 0.40
0.5 -
60 60
10.0 11.0
11.0 11.0
6.5 6.5
0.1 - 1.2 0.65 0.2 - 1.3 0.70
0.4
60 60
11.0
11.0
6.5
0.1 - 1.0 0.55
-
60
71
81
81 Pipe Gripping Pliers 왘 ideal for tightening and releasing plastic pipe joints, round union nuts, etc. from 25 up to 65 mm dia. 왘 with serrated gripping jaws 왘 4-position adjustable slip joint 왘 Chrome Vanadium electric steel, oil-hardened and tempered
81 03 230
Model 81 13 230: 왘 with plastic jaws for careful installation up to 60 mm dia.
81 13 230
Bestell-Nr. Length mm
81 03 230 81 13 230 81 19 230
9 EAN-
9 Head
9 Handles
9 Working capacities
Code ø mm 25 - 65 25 - 60
4003773-
018957 050117 050124
chr. plated plastic coated chr. plated plastic coated 2 sets of plastic jaws for 81 13 230
82
g 290 295
Easy tightening and releasing of plastic pipe joints
82 Angle Nose Battery Pliers 왘 for nuts and screws up to max. 14 mm width across flats 왘 serrated gripping surfaces 왘 Chrome Vanadium electric steel, oil-hardened and tempered
82 51 200 Article-No. 9 EANLength mm
82 51 200
9 Head
9 Handles
Code g 215
4003773-
015079
polished
plastic coated
84
84 Cycle Pliers 왘 for very narrow screw connections 왘 special tool steel, oil-hardened and tempered Model 84 11 200: 왘 straight head
84 11 200 Article-No. 9 EANLength mm
Model 84 21 200: 왘 20° angled head
9 Style
9 Head 9 Handles
Code 051923
84 21 200
051930
1
9 Recess
polished plastic coated
mm 3.5
ø mm 6 /10
g 170
polished plastic coated
3.5
6 /10
170
4003773-
84 11 200
9 Head thickness
straight
2 20°
20° Angled head for work in confined areas
73
83
83 Pipe Wrenches 90° DIN 5234
geprüfte Sicherheit
83 10 015 Article-No. 9 EAN-
Inch
4003773-
014188 014195 014201 022329 022336
1 1 1/2 2 3 4
왘 red powder coated, jaws bright ground 왘 forged 왘 Chrome Vanadium steel, oil-hardened and tempered
9 Capacity
Code
83 10 010 83 10 015 83 10 020 83 10 030 83 10 040
왘 Swedish pattern 왘 90° angled jaws 왘 jaws with offset teeth in opposite direction 왘 teeth additionally induction hardened 왘 T-beam handle design 왘 captive adjusting nut
Working capacity mm 0 - 42 0 - 60 0 - 70 10 - 105 10 - 130
83
Length mm 310 420 560 650 750
g 785 1425 2590 3450 4910
83 Pipe Wrenches 45° DIN 5234
geprüfte Sicherheit
왘 Swedish pattern 왘 45° angled jaws 왘 jaws with offset teeth in opposite direction 왘 teeth additionally induction hardened 왘 T-beam handle design
왘 captive adjusting nut 왘 red powder coated, jaws bright ground 왘 forged 왘 Chrome Vanadium steel, oil-hardened and tempered
83 20 015 Article-No. 9 EANCode Inch
4003773-
83 20 010 83 20 015 83 20 020
014218 014225 014232
9 Capacity
1 1 1/2 2
Working capacity mm 0 - 42 0 - 60 0 - 70
83
Length mm g 320 810 430 1490 570 2820
83 Pipe Wrenches S-Type DIN 5234
geprüfte Sicherheit
83 30 015 Article-No. 9 EAN-
Inch
4003773-
83 30 005 83 30 010 83 30 015 83 30 020 83 30 030 74
025221 014249 014256 014263 014164
9 Capacity
Code 1/2 1 1 1/2 2 3
왘 slim, S-type jaw design, 45° angled jaws 왘 jaws with offset teeth in opposite direction 왘 teeth additionally induction hardened 왘 three-point gripping on pipes, self-locking
Working capacity mm 0 - 35 0 - 42 0 - 60 10 - 70 10 - 120
Length mm g 245 500 320 870 420 1570 540 2540 680 4295
왘 T-beam handle design 왘 captive adjusting nut 왘 red powder coated, jaws bright ground 왘 forged 왘 Chrome Vanadium steel, oil-hardened and tempered
85
85 SmartGrip™,
the Water Pump Pliers with automatic adjustment
patented
DIN ISO 8976
85 01 250 왘 self-controlled adjustment on the workpiece simply by squeezing the handles - ideal for frequent changeover to workpieces of different size 왘 one-hand operation for left and right handed people 왘 locking lever for space saving transport with reliable closed handles 왘 fine adjustment for favourable handle width
왘 slim dimensions for good access to the workpiece 왘 capacity: for nuts 10 - 36 mm (1 3/8") a/f; for pipes 1/8" - 1 1/4" 왘 box-joint design: high stability because of double guide and secure catching of the hinge bolt 왘 self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 favourable lever action: optimum transmission of force 왘 guard prevents operators´ fingers being pinched 왘 Chrome Vanadium electric steel, forged, oil-hardened and tempered
The adjustment procedure to match with the workpiece acts self-controlled with the SmartGrip™. Position the pliers, press handles ready!
10 - 36 mm
1/8 - 1 1/4”
Automatic adjustment: not time-consuming trial and error-adjusting of the correct opening size in case of differently sized workpieces (e. g. the red highlighted nuts and threaded connections). Everything done with a snatch
Locking lever for space saving transport with reliable closed handles
Slim dimensions for good access to the workpiece using one-hand operation
Article-No. 9 EAN-
9 Handles
Lenth mm
85 01 250
9 Head
Code
9 Working capacities for pipes for nuts Inch
4003773-
061304
polished
with non-slip plastic coating
1 1/4”
mm (across flats) 36
g 340
75
87
87 KNIPEX-"Cobra" XL / XXL,
Pipe Wrenches and Water Pump Pliers
patented
“Cobra XXL” - Water Pump Plier and Pipe Wrench in one tool. The optimized jaw design grips nuts and pipes up to 4 1/2“ with a weight and size of a 2“ Pipe Wrench. Besides the tremendous capacity this heavy duty plier is adjustable quickly, securely and firmly directly on the workpiece.
87 01 560
87 01 400
왘 Pipe Wrench and Water Pump Plier in one tool 왘 self-locking on pipes and nuts: no slipping on the workpiece; low handforce required 왘 fast and firm adjustment directly on the workpiece
왘 왘 왘 왘 왘
no unintentional shifting non-slip joint fine adjustment optimum lever action can be used as a wrench in a lot of situations
왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 Chrome Vanadium electric steel, oil-hardened and tempered
Model 87 01 400: 왘 capacity of jaws for pipes up to 3 1/2" at a total length of a 1 1/2" Pipe Wrench 왘 20% less weight than a 1 1/2“ Pipe Wrench 왘 27 adjustment positions Model 87 01 560: 왘 capacity of jaws for pipes up to 4 1/2" at a total length of a 2" Pipe Wrench 왘 40% less weight than comparable Pipe Wrenches 왘 20 adjustment positions
Fine adjustment by pushing a button: quick and comfortable
Optimized shape of jaws for gripping pipes and nuts
Fast and firm adjustment directly on the workpiece
Article-No. 9 EANLenth mm
87 01 400 87 01 560 76
9 Head
9 Handles
Code
Self-locking on pipes and nuts. No slipping on the workpiece and less handforce required
9 Working capacities for pipes for nuts Inch
4003773-
005636 044321
87 01 560: Jaw-capacity for pipes up to 4 1/2“ at a weight and length of a 2“ Pipe Wrench
polished
plastic coated
3 1/2 4 1/2
95 120
mm (across flats) g 1190 2760
For the complete ”Cobra“Range from 150 - 560 mm see page 78
86
86 Pliers Wrenches,
Pliers and Wrench in a single tool 왘 excellent for gripping, holding, pressing and bending workpieces 왘 for careful installation of finished-surface components 왘 zero backlash jaw surface pressure prevents damage to edges of sensitive components 왘 fast adjustment by pushing a button directly on the workpiece 왘 no unintentional shift of the gripping jaws and no slipping of the joint 왘 replaces a complete set of spanners 왘 parallel jaws allow infinitely variable gripping of all widths to the specified maximum size 왘 the action of the jaws allows screwed connections to be tightened and released quickly using the ratchet principle 왘 lever transmission greater than 10 - 1 for strong gripping power 왘 also for tile breaking
patented
86 03 180
86 05 250
86 03 300
86 07 250 Compressive strain areas when force is applied on the Pliers Wrench 86 03 250 and a conventional open end wrench
Pliers Wrench: zero backlash under pressure
-
< compressive < strain
+
Conventional open end wrench: edge pressure causes surface damage
Model 86 03/05 180: 왘 with narrow gripping jaws - for fastening/loosening situations requiring a slim tool
The patented Pliers Wrench is a multi functional fastening, gripping and holding tool with fast adjustment pushing a button. The high lever ratio, parallel jaws without profile and infinitely variable adjustment guarantee a secure and smooth gripping of the workpiece free from any backlash.
Working on plated fittings without damage of the surface
86 07 250: Scale for presetting the opening width apart from the workpiece
B3
B2 B1
Works using the ratchet principle
Article-No. 9 EANLength mm
86 03 180 250 300 86 05 180 250 86 07 250
9 Head
Code 4003773-
028260 022084 040224 047162 047841 065067
nickel plated nickel plated nickel plated
Fast adjustment by pushing a button
9 Handles
9 Working Capacities
Zoll plastic 1 3/8 coated 1 3/4 2 3/8 with two-colour dual 1 3/8 component handles 1 3/4 plastic dipped insulated 1 3/4 , VDE-tested
9 Dimensions mm 35 46 60 35 46 46
B1 mm 5.0 8.0 9.5 5.0 8.0 8.0
B2 mm 8.0 8.0 9.5 8.0 8.0 8.0
B3 mm 12.0 14.0 15.0 12.0 14.0 14.0
86 03 300: enormous pressure and a capacity up to 60 mm/ 2 3/8" allows application even on large size nuts
g 260 540 725 280 570 600
77
87
KNIPEX-”Cobra XL / XXL“ see also page 76
87 KNIPEX-"Cobra",
the HiTech Water Pump Pliers
patented
DIN ISO 8976
87 01 150
87 01 180
87 01 250
87 01 300
87 02 250
왘 fast adjustment directly on the workpiece: fast and comfortable handling 왘 fine adjustment: ensures optimum adjustment to differently sized workpieces and user-friendly handle position; 8701150: 11 adjustment positions 8701180: 11 adjustment positions 8701250: 25 adjustment positions 8701300: 14 adjustment positions 8701400: 27 adjustment positions 8701560: 20 adjustment positions 왘 secure catching of the hinge bolt: no unintentional shifting 왘 box-joint design: high stability because of double guide 왘 self-locking on pipes and nuts: no slipping on the workpiece and low handforce required 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping
KNIPEX-"Cobra" - the HiTech Water Pump Pliers. No more time-consuming test-adjusting of the correct opening size. Just position the upper jaw to the workpiece, push button and move close the lower jaw, ingeniously simple.
왘 one-hand adjustment 왘 guard prevents operators' fingers being pinched 왘 favourable lever action: optimum transmission of force 왘 Chrome Vanadium electric steel, oil-hardened and tempered Model 87 01 150: 왘 Mini-”Cobra”, length only 150 mm
87 05 250
Self-locking on pipes and nuts. No slipping on the workpiece and less handforce required
Article-No. 9 EANLength mm
87 01 150 180 250 300 400 560 87 02 180 250 300 87 03 180 250 300 87 05 250 300 78
9 Head
9 Handles
Code
9 Capacities for pipes
4003773-
060116 013297 013303 014157 005636 044321 042396 040316 029144 005667 005674 014119 005681 014126
Fine adjustment by pushing a button: fast and comfortable
for nuts mm (across flats)
Inch
polished
with non-slip plastic coating
polished
plastic coated
polished
with two-colour dual component handles with non-slip plastic coating
chrome plated chrome plated
with two-colour dual component handles
1 1/4 1 1/4 2 2 3 1/2 4 1/2 1 1/4 2 2 1 1/4 2 2 2 2
Fast and firm adjustment directly on the workpiece
30 30 46 46 95 120 30 46 46 30 46 46 46 46
g 135 170 300 545 1190 2760 185 320 580 170 300 545 320 580
Operation on pneumatic pipes
87
87 KNIPEX-”Cobra..matic”, patented
Water Pump Pliers for one-hand operation DIN ISO 8976
왘 the proved "Cobra" with automatic adjustment 왘 the plier can be opened and adjusted directly at the workpiece with one hand
87 11 250 Article-No. 9 EANLength mm
87 11 180 250 87 19 180 250
9 Head
9 Handles
9 Capacities for pipes
Code
Inch
4003773-
026921 022107 026938 022640
for nuts
polished
with non-slip plastic coating
1 1/4 1 1/2
mm (across flats) 30 36
g 170 300
왘 the "Cobra..matic" closes when pushing a button 왘 the integrated spring of the automatic adjustment is shielded in the handles 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 Chrome Vanadium electric steel, oil-hardened and tempered
spare spring
87
87 Multiple Slip Joint Spanner patented
87 41 250
Self-locking: no slip on workpieces; less effort required
Multiple Slip Joint Spanner Working on tight nuts as the second spanner for with rounded edges tightening locknuts
Article-No. 9 EANLength mm
87 41 250
9 Head
Fine adjustment by pushing a button: fast and comfortable
9 Handles
왘 for hexagonal screws and nuts width across flats 10 - 32 mm (3/8" - 1 1/4"); self-locking in the range of 17 - 32 mm (11/16" - 1 1/4"); no slip on workpieces; less effort required 왘 replaces a complete set of spanners 왘 perfect fitting grip on bolt heads and nuts with metric or imperial sizes; no rounding of gripping surfaces 왘 the plier-type gripping movement of the jaws allows threaded connections to be tightened and released quickly using the ratchet principle 왘 ideal for tightening locknuts 왘 secure and tight grabbing of bolt heads with rounded edges, rusted nuts or heavily coated workpieces 왘 secure catch of the hinge bolt: no unintentional shifting 왘 box-joint design: high stability because of double guide 왘 guard prevents operators' fingers being pinched 왘 ergonomic handle design with non-slip plastic coating for comfortable grip particularly with large and tight nuts
The new KNIPEX Multiple Slip Joint Spanner is a combination tool that offers the convenience of the comfortable push-button adjustment on the workpiece and the function of an adjustable spanner. Zero backlash pressure of the jaws avoids slipping on the threaded connection or a rounding effect on the edges. Even rounded edges and heavily coated workpieces that do not offer a convenient gripping surface to conventional wrenches, can be loosened with the exceptionally powerful gripping jaws of the Multiple Slip Joint Spanner.
왘 one-hand fine adjustment by pushing a button with 15 adjustment positions directly on the workpiece for perfect grip on different sized workpieces and a favourable position of the hand 왘 Chrome Vanadium steel, oil-hardened and tempered
9 Capacities
Code 4003773-
054566
polished
with non-slip plastic coating
mm 10 - 32
Inch 3/8“-1 1/4“
g 315
79
87
87 KNIPEX-"Cobra" ES,
the Extra Slim Water Pump Pliers
patented
DIN ISO 8976
87 51 250 왘 particularly good access to the workpiece due to very slim construction of head and joint area 왘 long, narrow jaws 왘 ideal for service and maintenance, equipment repair, automotive and general industry 왘 one-hand fine adjustment by pushing a button with 19 adjustment positions directly on the workpiece for perfect grip on different sized workpieces
왘 왘 왘 왘 왘
왘 favourable lever action: and a favourable position of optimum transmission of force the hand 왘 guard prevents operators´ secure catching of the hinge fingers being pinched bolt: no unintentional shifting box-joint design: high stability 왘 Chrome Vanadium electric steel, oil-hardened and because of double guide tempered firm grip also on flat material due to three-point rest self-locking on pipes and nuts: no slipping on the workpiece and low handforce required gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping
Grips nuts up to 42 mm (1 5/8") across flats
Optimum access to the workpiece. Ideal for service and maintenance, equipment repair, automotive and general industry
Fine adjustment by pushing a button: fast and comfortable
Very slim construction in the complete head and joint area (compared to conventional water pump pliers)
Article-No. 9 EAN-
9 Handles
Lenth mm
87 51 250
80
9 Head
Code
9 Working capacities for pipes for nuts Inch
4003773-
061267
polished
Subject to the increasing compactness of components and machines the workspace becomes more confined. However, the requirements on the gripping force and capacity of tools on the other hand do not decrease. KNIPEX-“Cobra” ES allows powerful gripping in confined areas.
with non-slip plastic coating
1 1/4"
(across flats) 42 mm
g 325
88
88 KNIPEX-"Alligator",
Water Pump Pliers DIN ISO 8976
88 01 180
88 01 250
왘 box-joint design: high stability because of double guide 왘 self-locking on pipes and nuts: no slipping on the workpiece; low handforce required 왘 guard prevents operators' fingers being pinched 왘 favourable lever action: optimum transmission of force 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 Chrome Vanadium electric steel, oil-hardened and tempered
88 02 250
88 06 250 Self-locking on pipes and nuts. No slipping on the workpiece and less handforce required
88 07 250 Optimized shape of jaws for gripping pipes and nuts
Article-No. 9 EANLength mm
9 Head
9 Handles
Code
9 Capacities for pipes
for nuts
1 1/2 1 1/4 1 1/2 2 1 1/4 1 1/2 2 1 1/4 1 1/2 2 1 1/4 1 1/2 2 1 1/2
Inch 36 30 36 46 30 36 46 30 36 46 30 36 46 36
mm (across flats) g 300 185 315 505 215 355 555 185 315 505 215 355 555 370
1 1/2 2
36 46
415 635
4003773-
88 00 250 88 01 180 250 300 88 02 180 250 300 88 03 180 250 300 88 05 180 250 300 88 06 250
019176 034445 013341 013358 044222 019282 029151 042860 005742 019312 060130 035497 042389 039303
polished polished
red lacquered with non-slip plastic coating
polished
with two-colour dual component handles
chrome plated
with non-slip plastic coating
chrome plated
with two-colour dual component handles
chrome plated
88 07 250 300
019343 022350
chrome plated
insulated with two-colours dual component handles , VDE-tested plastic dipped insulated , VDE-tested
81
89
89 Water Pump Pliers
with groove joint DIN ISO 8976
89 01 250
왘 easy, convenient engagement in 5 different positions due to milled swivel 왘 non-slip joint 왘 can be used as a wrench in a lot of situations 왘 all strain removed from the joint screw, hence no wear on pivot 왘 guard prevents operators' fingers being pinched 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC for tool length 250 mm: low wear for secure grip
89 05 250 Article-No. 9 EANLength mm
89 01 200 250 89 03 200 250 89 04 250 89 05 200 250
9 Head
9 Handles
9 Capacities for pipes
Code
Inch
4003773-
013327 013334 019367 015086 005841 039310 043836
polished
plastic coated
chrome plated chr. plated chrome plated
plastic coated chrome plated with two-colour dual component handles
90
90 Small Water Pump Pliers
1 1/4 1 5/16 1 1/4 1 5/16 1 5/16 1 1/4 1 5/16
Length mm
90 01 125 90 03 125
82
9 Head
DIN ISO 8976
9 Handles
Code
for nuts
Ø mm
polished chr. plated
plastic coated plastic coated
g 230 335 230 335 325 260 380
왘 easy, convenient engagement in 4 different positions 왘 non-slip joint 왘 all strain removed from the joint screw, hence no wear on pivot 왘 forged from Chrome Vanadium electric steel, oil-hardened and tempered
9 Capacities for pipes
4003773-
013310 019374
mm (across flats) 30 36 30 36 36 30 36
with groove joint
90 03 125
Article-No. 9 EAN-
for nuts
17 17
mm (across flats) 14 14
g 100 100
왘 Chrome Vanadium electric steel, oil-hardened and tempered Model 89 .. 250: 왘 self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
90
90 Pipe Cutter
Cutter for Plastic Pipes 94 10 185 see page 93
for composite pipes and protective tubes 왘 for cutting composite pipes with a diameter of 12.0 25.0 mm and for cutting flexible protective tubes with a diameter of 18.0 – 35.0 mm without damaging the pipe inside 왘 easily exchangeable blades 왘 a calibration arbor can be fitted, for example for Geberit composite pipes with 11.5 and 15.0 mm dia. 왘 high strength special grade steel, oil-hardened and tempered
90 25 20
Protective tube: to be cut with the front blades
Clean cut of protective tubes 18 – 35 mm dia.
Composite pipe: to be cut with the rear cutter
Article-No. 9 EAN-
9 Head
9 Handles
Code
composite pipes protective pipes Length ø mm ø mm mm 12 - 25 18 - 35 210
4003773-
90 25 20
046004
90 29 01 90 29 02 90 29 15
031932 031949 031956
galvanized
with two-colour dual component handles spare blade for composite pipes spare blades for protective tubes calibration arbor for Geberit pipes, 11.5 and 15.0 mm dia.
90
90 Pipe Cutter
g 325 Composite pipes of 12 – 25 mm dia. are cut cleanly and without deformation
for composite and plastic pipes
patented
왘 for cutting thick walled plastic and composite pipes of 26.0 - 40.0 mm dia. 왘 cuts pipes according to the ratchet principle in several strokes 왘 moveable pipe support positions pipes of various diameters correctly for a rectangular cut 왘 easily exchangeable blades 왘 high strength special grade steel, oil-hardened and tempered
90 25 40
Article-No. 9 EAN-
9 Cutting capacities
9 Head
9 Handles
4003773-
90 25 40
045182
galvanized
90 29 40
045199
spare blade
with two-colour dual component handles
9 Cutting capacities
Code ø mm 26 – 40
Clean cut of thick walled plastic and composite pipes
Length mm 210
g 465
Not suitable for thin walled plastic pipes
83
90
90 Punch Lock Riveters
90 41 340
90 42 250 Article-No. 9 EAN- 9 Head Length Code mm 400377390 41 340 028055 90 42 250 047865 90 49 340 028079 90 49 340 M 028499
9 Handles
burnished plastic coated burnished with plastic handles spare punch for 90 41 340 spare die for 90 41 340
9 Capacity
mm
g 900 690
max 1.2 (2 x 0.6)
90
90 Sheet Metal Nibbler
왘 for producing solid connections of all metal section sheets used in partition walls and false ceilings 왘 for U- and C-shaped sections with max 1.2 mm metal (2 x 0.6 mm) 왘 minimum handforce required due to optimum lever transmission
왘 high strength special grade steel, oil-hardened and tempered
Setting the plier for connection of two metal section sheets
The punching tool is pressed through the metal section sheets
The sheet projections are bent
Completed sheet connection
왘 for cutting iron, copper or aluminium plate up to max. 1.2 mm thickness, plastic up to max. 2.0 mm thickness 왘 materials are cut without deformation 왘 clean cut edges - no additional work needed on the cut profile
왘 with chip breaker 왘 easy handling 왘 high strength special steel, particularly stressed parts oil-hardened and tempered
90 55 280: Notching and chip breaking in one operation
Notching without chip breaking
Model 90 41 340: 왘 for two-hand operation Model 90 42 250: 왘 for one-hand operation
90 55 280
Article-No. 9 EANLength mm
90 55 280 90 59 280 84
9 Head
9 Handles
Code 4003773-
026730 027355
nickel plated spare blade
with plastic handles
g 560
90
90 Notching Pliers 왘 special pliers for notching out recesses in plastic ledges and casing boxes for electric and sanitary installation 왘 notches can be enlarged by initial and final cut 왘 clean cut edges - no additional work needed on the cut profile 왘 high cutting performance with little handforce due to optimum lever transmission 왘 easy handling 왘 with opening spring and restricted opening 왘 cutter head: special tool steel, oil-hardened and tempered
patented
90 61 20
90 61 16
The KNIPEX Notching Pliers produces the most common notches in plastic ledges and cable ducts in a simple, fast and clean way. No time-consuming sawing out or nibbling and no additional work required.
90 61 20
Article.-No. 9 EAN-
9 Head
9 Handles
9 Capacity
Code
90 61 16
051947
burnished
with plastic handles
16 x 32 mm
Length mm 250
90 61 20
051954
burnished
with plastic handles
20 x 29 mm
250
4003773-
90
g 405 415
Clean cut profile requires no additional work
90 Revolving Punch Pliers
90 70 220
Article.-No. 9 EANLength mm
90 70 220
9 Finish
왘 for punching holes in leather, textiles and plastic material 왘 with six interchangeable punches: 2.0/2.5/3.0/3.5/4.0/5.0 mm dia. 왘 with opening spring and locking lever 왘 powder-coated for reliable protection against rust 왘 punched and stamped from high-strength sheet steel
Code 4003773-
019411
powder-coated
g 265 Interchangeable punches
85
91
91 Tile Nibbling Pincer,
Parrot Beak Pincer 왘 predrilled holes in tiles can be enlarged and edges formed by nibbling 왘 high grade special tool steel, oil-hardened and tempered
91 00 200 Article-No. 9 EANLength mm
91 00 200
9 Head
9 Handles
Code g 165
4003773-
013754
polished
black atramentized
91
91 Tile Breaking Pincer
왘 for breaking tiles to a scored line 왘 moveable, self-aligning jaw, rubberlined to protect the tile 왘 special tool steel
91 11 190
Article-No. 9 EANLength mm
91 11 190
9 Head
9 Handles
Code g 335
4003773-
019459
black lacquered
plastic coated
91
91 Glass Breaking Pincer 왘 for breaking glass to a scored line 왘 special tool steel, oil-hardened and tempered
91 30 180
Article-No. 9 EANLength mm
91 30 180
86
9 Head
9 Handles
9 Jaw width
Code 4003773-
015093
polished
black atramentized
mm 24.0
g 265
91
91 Glass Nibbling Pincers 왘 for breaking off narrow strips of glass to a scored line 왘 for finishing off glass edges to required profile 왘 special tool steel, oil-hardened and tempered
Model 91 71 160: 왘 narrow version, with opening spring
91 51 160
Article-No. 9 EANLength mm
91 51 160 91 71 160
9 Style
9 Head
9 Handles
9 Jaw width
Code 4003773-
014355 019565
polished polished
plastic coated plastic coated
91
mm 9.5 4
g 155 145
91 Flat Nose Grozing Pliers 왘 with soft gripping jaws 왘 for trimming glass edges, e. g. when making leaded glass windows 왘 special tool steel
91 61 160
Article-No. 9 EANLength mm
91 61 160
9 Head
9 Handles
9 Jaw width
Code 4003773-
019527
polished
plastic coated
mm 9.5
g 145
87
92
92 Precision Tweezers for Electronics
Precision Tweezers, 왘 왘 왘 왘
pointed shape
for fine mounting work straight pattern smooth gripping surfaces particularly slim tips
Model 92 22 04: 왘 non-reflective mattfinished 왘 gripping surfaces mattfinished for optimum grip 왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality
92 22 04
92 22 06
92 22 07
92 23 05
92 24 01
Model 92 22 06: 왘 non-reflective mattfinished 왘 gripping surfaces mattfinished for optimum grip 왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality
Model 92 22 07: 왘 non-reflective mattfinished 왘 stainless, anti-magnetic and acid-proof Model 92 23 05: 왘 TITANIUM 왘 electrically conductive 왘 lightweight 왘 non-reflective mattfinished 왘 stainless, anti-magnetic and acid-proof Model 92 24 01: 왘 mirror finish nickel plated and polished
Precision Tweezers, needle-pointed shape 왘 왘 왘 왘 왘
Model 92 22 12: 왘 straight pattern
for ultra fine mounting work extra fine tips smooth gripping surfaces stainless, anti-magnetic non-reflective mattfinished
Model 92 22 13: 왘 American shape, solid 왘 straight pattern 왘 stainless, anti-magnetic and acid-proof
Model 92 34 28: 왘 bent tips
92 22 12
92 22 13
Model 92 32 29: 왘 sickle-shaped tips 왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality 왘 gripping surfaces mattfinished for optimum grip
92 34 28
92 32 29
Precision Tweezers, with dowel pin, pointed shape 왘 universally applicable 왘 narrow tips 왘 gripping surfaces with fine transverse serration 왘 chequered handles
Model 92 22 35: 왘 straight pattern 왘 non-reflective mattfinished 왘 stainless, anti-magnetic and acid-proof
92 22 35
Model 92 24 34: 왘 straight pattern 왘 nickel plated
92 24 34
92 34 36
88
Model 92 34 36: 왘 bent tips 왘 nickel plated Model 92 34 37: 왘 bent tips 왘 black non-reflective lacquered
92 34 37
Data Table see page 91
Precision Tweezers, blunt shape 왘 왘 왘 왘
universally applicable straight pattern wide, round tips chequered handles
92 44 42
92 64 43
92 64 44
92 70 46
92 72 45
Precision Tweezers, rectangular blunt
92 84 18
Model 92 44 42: 왘 jewellers´ tweezers 왘 round tips, approx. 2 mm wide 왘 gripping jaws with fine crosswise serration (cross cut) 왘 nickel plated
Model 92 70 46: 왘 round tips, approx. 3.5 mm wide 왘 gripping surfaces with fine transverse serration 왘 black non-reflective lacquered
Model 92 64 43: 왘 round tips, approx. 3.0 mm wide 왘 gripping surfaces with fine transverse serration 왘 nickel plated
Model 92 72 45: 왘 round tips, approx. 3.5 mm wide 왘 serrated gripping surfaces 왘 non-reflective mattfinished 왘 stainless, anti-magnetic and acid-proof
Model 92 64 44: 왘 round tips, approx. 3.5 mm wide 왘 gripping surfaces with fine transverse serration 왘 nickel plated
왘 mounting tweezers 왘 rectangular tips, approx. 0.9 mm wide 왘 gripping surfaces with fine transverse serration 왘 nickel plated
Precision Tweezers, round slim shape 왘 round tips, approx. 2 mm wide 왘 smooth gripping surfaces 왘 stainless, anti-magnetic and acid-proof
92 52 23
Precision Tweezers, for mounting work 왘 smooth gripping surfaces 왘 non-reflective mattfinished
Modell 92 02 53: 왘 for SMD-technology* 왘 angled tips, width approx. 1 mm 왘 gripping surfaces mattfinished for optimum grip 왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality
92 02 53
92 02 54
92 12 52
92 02 55 * SMD-technology: technique for soldering surface mounted components on printed circuit boards without using holes.
Model 92 02 54: 왘 for SMD-technology* 왘 angled tips, width approx. 1 mm 왘 gripping jaws 3.5 mm wide, for cylindrical components of 0.6 mm dia. 왘 gripping surfaces mattfinished for optimum grip
왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality Model 92 02 55: 왘 gripping jaws 3.5 mm wide, for cylindrical components of 0.8 mm dia. 왘 chequered handles 왘 stainless, anti-magnetic and acid-proof Model 92 12 52: 왘 bent tips 왘 extra strong tips 왘 stainless, anti-magnetic 89
92
92 Precision Tweezers for Electronics
Precision Tweezers ESD
92 08 78 ESD
92 08 79 ESD
92 38 75 ESD
92 28 69 ESD
92 58 74 ESD
92 28 70 ESD
92 78 77 ESD
92 28 71 ESD
92 88 73 ESD
92 28 72 ESD
왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality 왘 ESD coating: non-reflective black, with a surface resistance of approx. 105 Ohm 왘 tips non-reflective brushed 왘 gripping surfaces mattfinished for optimum grip
Model 92 28 71 ESD: 왘 needle-pointed tips 왘 straight pattern 왘 smooth gripping surfaces
Model 92 08 78 ESD: 왘 for SMD-technology* 왘 bent tips 왘 smooth gripping surfaces
Model 92 38 75 ESD: 왘 sickle-shaped tips 왘 smooth gripping surfaces
Model 92 08 79 ESD: 왘 shaped to grip horizontal cylindrical components of 1.0 mm dia. 왘 smooth gripping surfaces 왘 chequered handles Model 92 28 69 ESD: 왘 straight pattern 왘 strong tip 왘 smooth gripping surfaces Model 92 28 70 ESD: 왘 straight pattern 왘 fine tip 왘 smooth gripping surfaces
Model 92 28 72 ESD: 왘 American shape, solid 왘 long tips 왘 straight pattern 왘 smooth gripping surfaces
Model 92 58 74 ESD: 왘 round tips, approx. 2 mm wide 왘 straight pattern 왘 smooth gripping surfaces Model 92 78 77 ESD: 왘 round tips, approx. 3.5 mm wide 왘 straight pattern 왘 serrated gripping surfaces 왘 chequered handles Model 92 88 73 ESD: 왘 rectangular tips, approx. 0.9 mm wide 왘 gripping surfaces with fine transverse serration
Precision Tweezers, insulated 왘 tested according IEC 60900: 2004 왘 plastic dipped insulated 왘 nickel plated
Model 92 27 61: 왘 for ultra fine mounting work 왘 extra fine tips 왘 straight pattern 왘 gripping surfaces mattfinished for optimum grip
92 27 61
92 27 62
Model 92 27 62: 왘 straight pattern 왘 gripping surfaces with fine transverse serration
Model 92 37 64: 왘 bent tips 왘 gripping surfaces with fine transverse serration Model 92 67 63: 왘 straight pattern 왘 serrated gripping surfaces
92 67 63
92 37 64 * SMD-technology: technique for soldering surface mounted components on printed circuit boards without using holes.
90
Plastic Tweezers 왘 solid plastic tweezers 왘 trapezoidal tips, approx. 3.5 mm wide 왘 serrated gripping surfaces
왘 chequered handles 왘 heat resistant up to approx. 130° C
왘 universally applicable 왘 for efficient clamping 왘 nickel plated
Model 92 95 89: 왘 narrow tips 왘 straight pattern 왘 gripping surfaces with fine transverse serration 왘 handles with plastic attachement
92 69 84
Cross-Over Tweezers
92 94 91
92 95 89
Article-No
92 95 90
9 EAN-
Model 92 94 91: 왘 trapezoidal tips 왘 straight pattern 왘 gripping surfaces with fine transverse serration 왘 chequered handles
4003773-
92 02 53 92 02 54 92 02 55 92 08 78 ESD 92 08 79 ESD 92 12 52 92 22 04 92 22 06 92 22 07 92 22 12 92 22 13 92 22 35 92 23 05 92 24 01 92 24 34 92 27 61 92 27 62 92 28 69 ESD 92 28 70 ESD 92 28 71 ESD 92 28 72 ESD 92 32 29 92 34 28 92 34 36 92 34 37 92 37 64 92 38 75 ESD 92 44 42 92 52 23 92 58 74 ESD 92 64 43 92 64 44 92 67 63 92 69 84 92 70 46 92 72 45 92 78 77 ESD 92 84 18 92 88 73 ESD 92 94 91 92 95 89 92 95 90
054603 054610 054627 054634 054641 054658 054665 054672 054689 054696 054702 054719 054726 054733 054740 054757 054764 054771 054788 054795 054801 054818 054825 054832 054849 054856 054863 054887 054894 054900 054917 054924 054931 054948 055075 054962 054979 054986 054993 055006 055013 055020
9 Finish
Code stainless, anti-magnetic stainless, anti-magnetic stainless, anti-magnetic, acid-proof stainless, anti-magnetic, electrically dissipative stainless, anti-magnetic, electrically dissipative stainless, anti-magnetic stainless, anti-magnetic stainless, anti-magnetic stainless, anti-magnetic, acid-proof stainless, anti-magnetic stainless, anti-magnetic, acid-proof stainless, anti-magnetic, acid-proof stainless, Titanium, anti-magnetic, acid-proof nickel plated nickel plated insulated and tested according to IEC 60900: 2004 insulated and tested according to IEC 60900: 2004 stainless, anti-magnetic, electrically dissipative stainless, anti-magnetic, electrically dissipative stainless, anti-magnetic, electrically dissipative stainless, anti-magnetic, electrically dissipative stainless, anti-magnetic stainless, anti-magnetic nickel plated black coated insulated and tested according to IEC 60900: 2004 stainless, anti-magnetic, electrically dissipative nickel plated stainless, anti-magnetic, acid-proof stainless, anti-magnetic, electrically dissipative nickel plated nickel plated insulated and tested according to IEC 60900: 2004 plastic black coated stainless, anti-magnetic, acid-proof stainless, anti-magnetic, electrically dissipative nickel plated stainless, anti-magnetic, electrically dissipative nickel plated nickel plated nickel plated
Length mm 120 120 115 120 120 120 130 120 115 105 135 155 120 120 155 130 150 130 110 110 135 120 105 155 155 150 120 140 120 120 120 145 145 130 145 145 145 125 130 160 160 160
Model 92 95 90: 왘 narrow tips 왘 bent tips 왘 gripping surfaces with fine transverse serration 왘 handles with plastic attachement
g 15 15 15 20 15 20 20 15 15 20 20 25 10 15 20 30 35 20 15 15 20 20 10 25 25 35 15 20 15 20 15 25 40 5 25 30 30 20 20 35 30 30
91
94
94 Cutter for Plastic Pipes,
for the Electrical Installation 왘 for clean cutting of plastic pipes (e. g. plastic clad pipes) with 6 - 35 mm dia. 왘 not suitable for cutting cables 왘 blade is replaceable and can be retracted in any position 왘 low force requirement due to special blade geometry and optimum transmission 왘 minimum operator fatigue due to ergonomic handle design and ratchet blade feed in stages 왘 die-cast aluminium body, red lacquered
94 10 185
Ø 6-35 mm
Article-No. 9 EANLength mm
94 10 185 94 19 185
9 Capacity
ø mm 6.0 - 35.0
g 560 50
왘 blade made of tool steel, oil-hardened and tempered
Code 4003773-
047025 047032
spare blade
94
94 Cutter for Ribbon Cables 왘 for crushing-free cutting of ribbon cable up to 56 mm width 왘 exchangeable cutting base with fence angle for rectangular cuts 왘 replaceable, conventional trapezoidal blade 왘 with opening spring and locking device 왘 handles and blade mounting made of high-strength special grade steel
94 15 215
Article-No. 9 EANLength mm
94 15 215 94 19 215
9 Head
9 Handles
9 Blade length
Code 4003773-
046011 046219
chrome plated spare blade
plastic coated
56 mm
g 345 50
93
94
94 Mitre Shears
for plastic and rubber sections 왘 for crushing-free cutting of plastic, rubber and soft timber section; also for ribbon cable up to 56 mm width 왘 exchangeable cutting base with fence angle for 45°-cuts and markings for 60°-, 75°and 90°- cuts 왘 replaceable, conventional trapezoidal blade 왘 with opening spring and locking device 왘 handles and blade mounting made of high-strength special grade steel
94 35 215
Article-No. 9 EANLength mm
94 35 215 94 19 215
9 Head
9 Handles
9 Blade Length
Code g 400 50
4003773-
046028 046219
chrome plated spare blade
95
95 Vinyl Shears,
plastic coated
56 mm
also for cable ducts 왘 special lever transmission 왘 new, very effective blade geometry 왘 head burnished, with twocolour dual component handles
patented
Model 95 02 10: 왘 for plastic material up to approx. 6.0 mm thickness (e. g. PE with 63 Shore)
95 02 10
High cutting performance for vinyl plates up to 6.0 mm thickness
Model 95 02 21: 왘 for cutting and shortening cable ducts, also for plastic material up to 4.0 mm thickness
95 02 21 Article-No. 9 EAN-
9 Cutting capacities
Code 4003773-
95 02 10 95 02 21
94
047872 052128
mm 4.0 - 6.0 max. 4.0
9 Blade length mm 60 110
Length mm 225 275
g 460 535
Blade length 110 mm for cutting wide cable ducts
95
95 Shears for KEVLAR® Fibres 왘 only for cutting fibres of KEVLAR® in optical fibre cables, not recommended for other materials 왘 precision grinding with serration prevents the fibres from slipping and guarantees a clean cut 왘 riveted precision joint, for low-friction movement and smooth and even cutting of the thin KEVLAR® fibres 왘 hard-chrome plated, ground surface 왘 user-friendly plastic handles 왘 body of shears oil-hardened and tempered
95 03 160 SB
Article-No. 9 EANLength mm
9 Head
9 Handles
Code 4003773-
95 03 160 SB 043362
chrome plated
plastic coated
95
g 80
Precision ground with fine toothing for clean, non-slip (nonskid) cut
95 Combination Shears 왘 combination shears for cutting cardboard, plastics, aluminium, brass and copper foils 왘 not suitable for steel wire or iron sheets 왘 precision ground, hardened blades 왘 with opening spring and locking lever 왘 with guard 왘 adjustable screw joint 왘 blades made of stainless steel 왘 oil-hardened and tempered
95 05 140
Model 95 05 185: 왘 angled shape - for easy execution of long cuttings 왘 ergonomically shaped plastic handles
95 05 185
95 05 190
Article-No. 9 EANLength mm
95 05 140 185 190
9 Head
9 Handles
Code
g
4003773-
019589 060277 019602
bright polished
with plastic handles
50 110 120
KEVLAR® is a registered Trademark of E. I. du Pont de Nemours and Company
95
95
95 Cable Shears 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 no crushing, slight deformation of the cable only 왘 with guard 왘 adjustable screw joint
95 05 165
95 06 230
Article-No. 9 EANLength mm
95 05 165 95 06 230
9 Head
9 Handles
9 Cutting Capacity
Code 4003773-
019596 006305
bright polished bright polished
with plastic handles plastic insulated VDE-tested
95
ø mm 10 16
mm2 24 50
AWG 3 1/0
g 115 275
Model 95 05 165: 왘 cable shears for universal use; cuts cables up to 10 mm dia. / 24 mm2 왘 with opening spring and locking lever 왘 blades made of stainless steel 왘 oil-hardened and tempered Model 95 06 230: 왘 for copper conductors single wire up to 16 mm2, multiple wire up to 50 mm2, fine strand up to 70 mm2 and aluminium conductors multiple wire up to 70 mm2 왘 easy cutting with one-hand operation due to high transmission ratio 왘 stainless - special grade - steel, oil hardened and tempered 왘 VDE tested according to DIN EN/IEC 60900: 2004
95 Cable Shears 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 easy cutting with one-hand operation 왘 with guard 왘 adjustable screw joint, self-locking 왘 forged 왘 special tool steel, oil-hardned and tempered
95 11 165
95 12 165
Model 95 11/12 165: 왘 universal use for dismantling and stripping
Cut performed with a Diagonal Cutter: high effort required, inaccurate cut, considerable deforming and crushing of the cable
95 16 165
Article-No. 9 EANLength mm
9 Head
9 Cutting capacity
Code 4003773-
95 11 165 95 12 165
029175 029182
burnished burnished
95 16 165
039648
chrome plated
96
9 Handles
plastic coated with two-colour dual component handles insulated with two-colour dual component handles VDE-tested
ø mm 15 15
mm2 50 50
AWG 1/0 1/0
g 210 245
15
50
1/0
255
Cut effected with a Cable Shear: easy, clean cut without any deformation of the cable
95
95 Cable Shears
with twin cutting edge 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 easy cutting with one-hand operation 왘 initial and final cut (upper and lower blade) allows cables of up to 20 mm dia. to be cut 왘 low handforce required due to favourable lever ratio and new blade geometry 왘 with guard 왘 adjustable screw joint, self-locking 왘 forged 왘 special tool steel, oil-hardened and tempered
patented
95 11 200
95 12 200
95 16 200
Article-No. 9 EANLength mm
9 Head
9 Handles
KNIPEX Cable Shears with twin cutting edge are designed for cutting cables up to 20 mm dia. Even in case of large cable cross sections handles are always in a favourable position due to initial and final cut.
9 Cutting capacity
Code 4003773-
95 11 200 95 12 200
026754 047834
burnished burnished
95 16 200
026761
chrome plated
95 17 200
026952
chrome plated
plastic coated with two-colour dual component handles insulated with two-colour dual component handles VDE- tested plastic dipped insulated VDE- tested
ø mm 20 20
mm2 70 70
AWG 2/0 2/0
g 295 345
20
70
2/0
345
20
70
2/0
380
Initial cut Final cut
Initial cut: using the upper cutting edge, an ergonomic handle opening is guaranteed even in case of large cable diameters
Final cut: if higher handforce is required, an additional cut can be done with the cutting edge profile near the joint. Initial cut with the upper cutting edge – final cut with the lower cutting edge
97
95
95 Cable Shears 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 low handforce required due to favourable lever ratio and new blade geometry 왘 short design, length only 500 mm 왘 low weight 왘 with guard 왘 adjustable screw joint 왘 cutter head forged from Vanadium steel, oil-hardened and tempered 왘 handles made of high resistant aluminium pipes
95 11 500
The Cable Shears in compact and low weight construction (up to 1,000 g less in weight than comparable cable shears) for cable diameters up to 27 mm. Easy and clean cut due to high lever transmission and optimum blade geometry.
Requires 32% less effort Cutting a multiple wire cable 5 x 50 mm2 with these high transmission KNIPEX Cable Shears (length 500 mm) requires handforce of only 560 N (56.0 kp) instead of 830 N (83.0 kp) with Cable Shears 95 21 600 (length 600 mm).
Large cutting capacity: max. 27 mm dia./150 mm2
Article-No. 9 EANLength mm
95 11 500 95 17 500
9 Head
9 Handles
9 Cutting capacity
Code 4003773-
026778 026785
polished polished
with plastic handles plastic dipped insulated VDE-tested
95
ø mm 27 27
mm2 150 150
AWG 5/0 5/0
g 1090 1360
95 Cable Shears 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 favourable transmission ratio due to double lever
95 21 600
Article-No. 9 EANLength mm
9 Handles
4003773-
95 21 600 95 27 600
025252 021797
95 29 600
021803
98
9 Head
9 Cutting capacity
Code polished polished
with plastic handles plastic dipped insulated VDE-tested spare cutter head
ø mm 27 27
mm2 150 150
AWG 5/0 5/0
g 2055 2300 365
왘 왘 왘 왘
with guard adjustable screw joint replaceable, forged cutter head cutter head made of special tool steel, oil-hardened and tempered
95
95 Cable Cutters,
Ratchet Action 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 one-hand operation using ratchet principle 왘 little handforce required due to optimum transmission ratio 왘 two-stage ratchet drive for easy cutting 왘 simple handling as a result of low weight and compact design - can be used even in confined areas 왘 with guard 왘 special grade tool steel
patented
95 31 250
95 36 250
Cutting thicker cables usually requires a high handforce. KNIPEX Ratchet Cable Cutters facilitate this work by means of a two-stage ratchet drive and a handle with support (model 95 31). The cable cutter can be rested on a solid ground so that additional body weight can be applied to lower arm musculature fatigue.
Models 95 31 250/280: 왘 fixed handle with support area for putting down the plier when cutting Models 95 31/36 280: 왘 suitable for aluminium sector cable up to 4 x 150 mm2
95 31 280
Article-No. 9 EANLength mm
9 Head
9 Handles
9 Cutting capacity
Code 4003773-
95 31 250 280 95 36 250 280
043935 043942 026884 026891
95 39 250 95 39 280
022244 025283
lacquered
with two-colour dual component handles lacquered insulated with two-colour dual component handles VDE-tested spare moving blade spare moving blade
95 31 280: large cutting capacity: maximum 52 mm dia. / 380 mm2
ø mm 32 52 32 52
mm2 240 380 240 380
MCM 500 750 500 750
g 575 750 560 735 130 260
Ratchet principle and two-stage ratchet drive for easier cutting.
99
95
95 Cable Cutters,
Ratchet Action 왘 for cutting copper and aluminium cables, single and multiple wire - also with hard rubber or plastic sheath 왘 not suitable for steel wire and wire ropes 왘 also suitable for cables with iron sheath reinforcement 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 little handforce required for cutting due to optimum transmission ratio 왘 high cutting capacity due to two-hand operation and ratchet action
95 31 720
Article-No. 9 EANLength mm
95 31 720 870 95 39 720 870
9 Head
9 Handles
9 Cutting capacity
왘 the blade can be opened in any cutting position 왘 suitable for working in confined areas 왘 blades made of special tool steel, oil-hardened and tempered 왘 handles made of steel tubing
Code 4003773-
025269 025276 025290 025306
lacquered
powder coated, with plastic handles spare moving blade
95
ø mm 60 100
mm2 740 960
MCM 1400 1900
g 5370 7090 595 1340
95 31 870: Large cutting capacity: maximum 100 mm dia. / 960 mm2
95 Wire Rope Cutter 왘 for medium hard wire up to 6 mm dia., e. g. Bowden cords, but also for cables and steel rods 왘 with opening spring and locking lever 왘 cutting edges additionally induction hardened 왘 special blade geometry prevents the wire rope fanning out
95 61 190
Article-No. 9 EANLength mm
95 61 190
100
9 Head
9 Handles
9 Cutting capacities
Code 4003773-
019640
polished
plastic coated
mm2 10
ø mm 6
ø mm 4
g 315
95 61 190: Clean cut without fanning out
95
95 Wire Rope and Cable Cutters 왘 for wire ropes and steel rods, copper and aluminium cables 왘 suitable for cutting overhead cables with strain relief wire 왘 angular cutting blades allow cutting of single rope wire 왘 optimum transmission ratio for high cutting performance 왘 low weight 왘 replaceable cutter head 왘 high-strength aluminium handles
95 71 600
Article-No. 9 EANLength mm
9 Head
9 Handles
9 Cutting capacities
왘 cutter head made of special grade tool steel, oil-hardened and tempered Model 95 81 600: 왘 with reinforced cutter head for higher performance, also cuts piano wire
Code 4003773-
95 71 445 600 95 77 600
014522 014539 025313
95 79 445 600 95 81 600 95 89 600
025320 025337 025344 025351
polished
with plastic handles
polished
plastic dipped insulated VDE-tested spare cutter head polished with plastic handles spare cutter head
95
mm2 95 150 150
ø mm 10 14 14
ø mm 7 9 9
AWG g 3/0 1100 5/0 1750 5/0 2250
150
16
10
5/0 2280
95 Bowden Cable Cutter 왘 for Bowden cables and soft wire rope up to 3.0 mm dia. (also V2A) 왘 smooth and clean cutting due to special shape of the cutting edges 왘 sickle shape cutting edges surround the material and prevent the wire rope fanning out 왘 little handforce required due to very high transmission ratio 왘 with opening spring and locking lever 왘 cutting edges additionally induction hardened
95 61 150
Article-No. 9 EANLength mm
95 61 150
9 Head
9 Handles
9 Cutting capacities
Code 4003773-
065197
polished
plastic coated
ø mm 3
g 200
101
97
97 Crimp Grip Pliers 왘 for solder-free electrical connections 왘 quick release lever 왘 high contact pressure with minimum handforce using toggle lever transmission 왘 reproducible crimping quality with high tensile strength because of zero point lock 왘 adjustable crimping pressure 왘 high strength special grade steel
97 00 215 A
Model 97 00 215 D: 왘 crimps conductor and insulation in one single operation
97 00 215 A
97 00 215 B
Article-No. 9 EANLength mm
9 Head
97 00 215 D 9 Handles 9 Range of Application
9 Capacity
Code 4003773-
97 00 215 A 006497
burnished burnished
97 00 215 B 006503
burnished nickel plated burnished burnished
97 00 215 D 006527
mm2 insulated terminals 0.5 - 6.0 and plug connectors non-insulated open 0.5 - 6.0 plug-type connectors (6.3 mm) insulated terminals 0.5 - 6.0 and plug connectors
97
AWG 20 -10
g 530
20 -10
525
20 -10
525
97 Crimping Pliers 왘 for cutting cables, stripping wire and crimping insulated and non-insulated terminals, connectors and plug type connectors 왘 with threaded holes for cutting copper and brass screws threaded M 2.6/ 3.0/ 3.5/ 4.0 and 5.0 mm 왘 high strength special grade steel
97 21 215
97 21 215
97 21 215 B
Article-No. 9 EANLength mm
97 21 215
9 Head
97 21 215 C 9 Handles 9 Range of Application
9 Capacity
Code 4003773-
019688
97 21 215 B 019695 97 21 215 C 019701
burnished with plastic handles burnished with plastic handles burnished with plastic handles
102 www.crimping.info
mm2 insulated terminals 0.75 - 6.0 and plug connectors non-insulated open 0.5 - 2.5 plug-type connectors (6.3 mm) non-insulated 0.5 - 6.0 terminals and plug connectors
AWG 18 -10
g 235
20 -13
240
20 -10
225
97
97 Crimping Pliers 왘 for cutting cables, stripping wire and crimping insulated and non-insulated terminals and connectors 왘 with threaded holes for cutting copper and brass screws threaded M 2.6; 3.0; 3.5; 4.0 and 5.0 mm 왘 high strength special grade steel
97 32 225
Article-No. 9 EANLength mm
97 32 225
9 Head
9 Handles
9 Range of Application
9 Capacity
Code 4003773-
019718
burnished with plastic handles
mm2 insulated terminals 0.5 - 6.0 and plug connectors non-insulated terminals 0.5 - 2.5 and plug connectors
97
AWG 20 -10
g 240
20 -13
97 Insertion Tool for LSA-Plus and identical 왘 tool for putting on boards, sockets and fields 왘 pushing down and cutting in one operation 왘 for UTP and STP cables, conductor 0.4 - 0.8 mm dia. 왘 with integrated pulling hook and release blade 왘 plastic body
97 40 10
Insertion tool to connect without having to strip
Article-No. 9 EAN-
9 Body
Putting down and cutting the cable in one operation
9 Range of Application
Code 4003773-
97 40 10
044895
plastic
UTP- and STP-cables, LSA-Plus and identical
9 Capacity ø mm 0.4 - 0.8
Length mm 175
g 95
www.crimping.info 103
97
97 Crimp System Pliers
with exchangeable crimp profiles
97 43 200 with crimp profile 97 49 06
Model 97 43 200: 왘 Crimp System Pliers 97 43 200 with service tools (hexagonal key, open end wrench, screws and nuts) in a plastic case. Foam insert with recesses for crimp profiles and locators. Model 97 43 05/06: 왘 with fixed crimp profile; in cardboard packaging
왘 for solder-free electrical connections 왘 almost parallel crimping performance 왘 repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmission of force due to lever action for fatigue-reduced operation 왘 ergonomically designed handles 왘 wide range of different crimp profiles for nearly all common crimp connections (see Art. No. 97 49..) 왘 further special profiles on request 왘 different locators for precise positioning of the connectors 왘 all stressed parts are made of special steel, oil-hardened and tempered 왘 head burnished; with plastic handles
97 43 200
Article-No. 9 EAN-
9 Range of applications
9 Capacity
Code mm2
4003773-
AWG
97 43 200
030812
see crimp die profile table
97 43 05
031031
97 43 06
031048
Crimp System Pliers for non-insulated 0.5 - 6.0 20 -10 open plug-type connectors (plug width 4.8 + 6.3 mm) Crimp System Pliers for insulated 0.5 - 6.0 20 -10 terminals and plug connectors
Crimp System Pliers 97 43 200 with crimp profile 97 49 30 for noninsulated butt connectors
104 www.crimping.info
Crimp System Pliers 97 43 200 with crimp profile 97 49 35 for spark plug connectors
Length mm g 200 970 200
615
200
615
Crimp System Pliers 97 43 200 with crimp profile 97 49 24 for D-Sub plugs
Nearly all common crimp connections can be realized with the KNIPEX Crimp System Pliers simply by exchanging the crimping dies. This comfort represents hand crimping technology at the state-of-the-art and optimum crimping results.
Crimp System Pliers 97 43 200 with crimp profile 97 49 61 and locator 97 49 90 for turned contacts with different pin diameters, swivelling
97
up to 250 different die profiles available; special profiles on request
97 Crimp Profiles and Locators Crimp die profile
for Crimp System Pliers
0 Applications 0
0 0
0 Article-No. 0
0 EAN-Code 0
0Capacity 0
97 49 04 97 49 05 97 49 06
4003773030850 030867 030836
non-insulated open plug-type connectors (2.8 + 4.8 mm / 4.8 + 6.3 mm) insulated terminals and plug connectors
0.1 - 2.5 mm2 0.5 - 6.0 mm2 0.5 - 6.0 mm2
AWG 27 - 13 20 - 10 20 - 10
g 50 55 55
97 49 16
040675
insulated terminals and plug connectors
10/16 mm2
7/5
50
97 49 08 97 49 09 97 49 18
030874 030881 063186
0.25 - 6.0 mm2 10/16/25 mm2 2 x 6/10/16 mm2
23 - 10 7/5/3 10/7/5
55 55 65
97 49 19
030898
end sleeves (ferrules) end sleeves (ferrules) twin end sleeves (ferrules) for flexible conductors end sleeves (ferrules)
35/50 mm2
2/0
65
97 49 13 97 49 23 97 49 15
030843 052135 043164 045069
97 49 24
030911
0.5 - 10 mm2 20 - 7 16 + 25 mm2 5+3 1.25 - 2.5 mm2 17 - 13 3.0 - 6.0 mm2 12 - 10 Ø 9.6/SW 8.4 + 8.1 mm; Ø 7.8/SW 7.0 mm 0.03 - 0.56 mm2 32 - 20
55 55 55
97 49 20
non-insulated terminals and plug connectors non-insulated terminals and plug connectors lug connectors and non-insulated plug connectors 4.8 + 6.3 mm F-connectors for TV and satellite connectors D-Sub-plugs
97 49 30
030904
non-insulated butt connectors
1.5 - 10 mm2
15 - 7
55
97 49 35
034315
spark plug connectors + distributors
1.0 mm2
17
55
97 49 40 97 49 50 97 49 44
030959 030966 041443
Coax connectors Coax connectors/Car phone rolled contacts
RG 58, 59, 62, 71, 223 RG 58, 174, 188, 316 0.14 - 1.5 mm2 26 - 15
60 60 50
97 49 54
041450
modular plugs
0.5 - 2.5 mm2
20 - 13
55
97 49 60
030928
turned contacts (HTS + Harting)
0.14 - 4.0 mm2
26 - 11
55
97 49 62
063179
solar connectors (Hubert + Suhner)
2.5/4.0 mm2
13/11
60
97 49 64
044093
ABS connectors
1.0 - 6.0 mm2
17 - 10
60
97 49 70
030942
unshielded Western plugs
97 49 74
044062
unshielded Molex plugs
4/6/8-poles RJ 10. 11. 12. 45 8-poles RJ 12/RJ 45
97 49 76
047513
shielded Stewart plugs
97 49 81
042778
97 49 82
042785
97 49 83
044079
97 49 84
042792
97 49 87
043331
97 49 90
031017
97 49 91 97 49 93 97 49 94
045144 047926 030997
Harting connectors for fibre optics Telegärtner connectors for fibre optics LWL-ST-, SC- + STSC-K-plugs for fibre optics Harting/Suhner connectors for fibre optics F-SMA; ST and MIC connectors for fibre optics Locator for 97 49 60 (HTS + Harting) Locator for 97 49 61 (Harting) Locator for 97 49 24 (D-Sub-plugs) Locator for 97 49 04
97 49 95
031000
Locator for 97 49 05
55 45
60 55 50
SW 3.0/Ø 3.5; SW 4.95/Ø 6.0; SW 6.5/Ø 7.5 SW 3.25/Ø 3.6; SW 3.65/Ø 4.0; SW 4.52/Ø 5.4 SW 3.65/Ø 4.1; SW 4.2/Ø 4.6; SW 5.0/Ø 6.0 SW 3.8/Ø 4.5; SW 4.3/Ø 5,2; SW 4,95/Ø 6,0 SW 8,7/Ø 9,5
55 55 55 55 50 70 70 70 20 20
www.crimping.info 105
97
97 Crimping Pliers
for Scotchlok Connectors, with side cutter 왘 for crimping plastic-insulated telecommunication or signal cables using the U-contact principle in single Scotchlok connectors 왘 no stripping necessary, U-shaped elements make the connection 왘 cutting edges additionally induction hardened 왘 with opening spring 왘 Vanadium steel, oil-hardened and tempered
97 50 01
U-contact
conductor insulation Article-No. 9 EAN-
9 Style 9 Head
9 Handles
9 Range of Application
9 Capacity
Code ø mm 0.4 - 1.1
4003773-
97 50 01
028239
polished plastic coated
97
97 Crimping Pliers
Scotchlok single
Length mm g 155 135
for Western Plugs 왘 for cutting and stripping unshielded ribbon telephone cables 왘 for crimping 4-pole Western plugs type RJ 10 (7.65 mm wide) 왘 head burnished, with plastic handles
97 51 04 4-poles
Cut cables
Strip cables
Article-No. 9 EAN-
Crimp Western plugs
9 Range of Application
9 Capacity
Code 4003773-
97 51 04 97 59 06
028048 029700
106 www.crimping.info
Western plugs RJ 10 (4-poles) 7.65 mm 4 spare blades for 97 51 04 / 10 / 12
Length mm g 190 230
97
97 Crimping Pliers
for Western Plugs
97 51 10
6-poles
8-poles
Article-No. 9 EAN-
9 Range of Application
9 Capacity
Code 4003773-
97 51 10
043171
Western plugs
97 59 06
029700
4 spare blades for 97 51 04 / 10 / 12
97
97 Crimping Pliers
RJ 11/12 (6-poles) 9.65 mm; RJ 45 (8-poles) 11.68 mm
6-poles
Precise, clean crimping
왘 professional tool for cutting and stripping unshielded ribbon telephone cables 왘 for crimping 4-, 6- and 8-pole Western plugs type RJ 10 (7.65 mm width), type RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width) 왘 exact crimping process due to parallel crimping 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism) 왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 with length cutter and dismantling knife for ribbon cables 6 and 12 mm length 왘 head burnished, with twocolour dual component handles
8-poles
Article-No. 9 EAN-
9 Range of Application
9 Capacity
Code 4003773-
97 51 12
043188
97 59 06
029700
Length mm g 190 300
for Western Plugs
97 51 12
4-poles
왘 with additional stripping device for round cables 왘 head burnished, with twocolour dual component handles
왘 professional tool for cutting and stripping unshielded ribbon telephone cables 왘 for crimping 6- and 8-pole Western plugs type RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width) 왘 exact crimping process due to parallel crimping 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism) 왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 with length cutter and dismantling knife for ribbon cables 6 and 12 mm length
Western plugs
4 spare blades for 97 51 04 / 10 / 12
RJ 10, (4-poles) 7.65 mm RJ 11/12 (6-poles) 9.65 mm RJ 45 (8-poles) 11.68 mm
Length mm g 200 530
Crimping Pliers with cutting and dismantling device
www.crimping.info 107
97
97 Four-Mandrel Crimping Pliers
for turned contacts 왘 for crimping turned contacts 왘 for solder-free electrical connections 왘 four-mandrel crimping for exact crimping performance 왘 mandrel gauge to check the basic setting 왘 locator for positioning the contacts 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 high operation comfort thanks to handy shape 왘 all stressed parts are made of special steel, oil-hardened and tempered
97 52 63 DG
97 52 64
Model 97 52 64: 왘 pressure adjustment depending on the conductor's diameter by means of adjusting wheel in 4 different positions 왘 nickel plated head, two-colour dual component handles Model 97 52 65: 왘 fine adjustment of pressure depending on the conductor's diameter by means of adjusting wheel 왘 nickel plated head, plastic handles Model 97 52 63 DG: 왘 fine adjustment of pressure depending on the conductor´s diameter by means of adjusting wheel 왘 with digital display of the preset crimping capacities 왘 display reversible between mm / inch and MIL numerical values 왘 nickel plated head; with twocolour dual component handles
97 52 65
97 52 65 DG
Locator for the contacts
Article-No. 9 EAN-
9 Range of Application
97 52 63/65 DG: Pliers with locator and service tools in a plastic case eith foam insert
turned contacts
mm2 0.08 - 2.5
AWG 28 - 13
Length mm g 180 370
97 52 63 DG 063209
terminales girados
0.08 - 2.5
28 - 13
195
380
97 52 64
041481
turned contacts
0.08 - 2.5
28 - 13
180
415
97 52 65
045236
turned contacts (Harting) terminales girados (Harting)
0.14 - 6.0
26 - 10
230
680
0.14 - 6.0
26 - 10
250
700
4003773-
050148
97 52 65 DG 063216
108 www.crimping.info
Model 97 52 65 DG: 왘 fine adjustment of pressure depending on the conductor´s diameter by means of adjusting wheel 왘 with digital display of the preset crimping capacities 왘 display reversible between mm / inch and MIL numerical values 왘 nickel plated head; with plastic handles
9 Capacity
Code
97 52 63
Model 97 52 63: 왘 fine adjustment of pressure depending on the conductor's diameter by means of adjusting wheel 왘 nickel plated head, two-colour dual component handles
Four-mandrel squeezing for exact crimping performance
97
97 Lever Action Crimping Pliers,
also for two-hand operation 왘 new generation of lever action crimping pliers 왘 for solder-free electrical connections 왘 the new lever transmission reduces the handforce up to 30% compared with regular crimping pliers 왘 repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 two-hand operation for easy crimping of large conductor diameters 왘 easy handling as a result of well balanced centre of gravity, angled head and ergnomically shaped handles 왘 all stressed parts are made of special steel, oil-hardened and tempered 왘 head burnished, non-slip plastic coated handles
97 52 03
97 52 04
With the new generation of Crimping Pliers even large conductor cross sections that normally require a high handforce can be crimped easily. The new lever transmission reduces the necessary handforce up to 30% compared with regular crimping pliers.
First step: move the handle with two fingers only until both jaws touch the connector to be crimped
97 52 06
97 52 10
97 52 09
Article-No. 9 EAN-
9 Range of Application
9 Capacity
Code 4003773-
97 52 03
025443
97 52 13 97 52 23 97 52 04
048084 052159 025450
97 52 05 97 52 06
025467 025474
97 52 08 97 52 09 97 52 19 97 52 10
025481 025498 052142 023678
97 49 94 97 49 95
030997 031000
non-insulated terminals and plug connectors
non-insulated, open plug-type connectors insulated terminals and plug connectors end sleeves (ferrules) COAX-, BNC- and TNC- connectors, RG 58 RG 59/62/71/223 locator for Art.-No. 97 52 04 locator for Art.-No. 97 52 05
mm2 AWG 4.0 - 10.0 11 - 7
Length mm g 250 565
0.5 - 10.0 20 - 7 16 + 25 5+3 0.1 - 2.5 27 - 13
250 250 250
570 565 565
0.5 - 6.0 0.5 - 6.0
20 - 10 20 - 10
250 250
570 560
0.5 - 6.0 10/16/25 35 + 50
23 - 10 7/5/3 2+0
250 250 250 250
575 570 575 575
20 20
Second step: now use the whole hand for further crimping procedure
Third step: when greater handforce is required, such as e. g. when crimping insulated connectors 6.0 mm2, two hand operation is possible by the longer handles
www.crimping.info 109
97
97 Crimping Pliers “PreciForce“ 왘 for solder-free electrical connections 왘 repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 high transmission of force thanks to lever action for fatigue-reduced working
97 52 36
Article-No. 9 EAN-
9 Range of Application
9 Capacity
Code mm2 AWG 1.5 - 10.0 15 - 7
4003773-
97 52 30
051855
97 52 33
051862
97 52 34 97 52 35
051879 051886
97 52 36
051893
97 52 37
063193
97 52 38
051909
97 52 50
051916
97 49 94 97 49 95
030947 031000
non-insulated butt connectors non-insulated terminals 0.5 - 10.0 and plug connectors non-insulated open 0.1 - 2.5 plug-type connectors 0.5 - 6.0 2.8+4.8 mm / 2.8+6.3 mm insulated terminals 0.5 - 6.0 and connectors heat shrinkeable 0.5 - 6.0 sleeve connectors end sleeves 0.25 - 6.0 (ferrules) COAX-BNCconnectors RG 58, 174, 188, 316 locator for 97 52 34 locator for 97 52 35
97
97 Lever Action Crimping Pliers
Length mm g 220 490
20 - 7
220
490
27 - 13 20 - 10
220 220
490 490
20 - 10
220
490
20 - 10
220
480
23 - 10
220
490
220
490
왘 for solder-free electrical connections 왘 repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory
The new Crimping Pliers provide a very good handling and amazingly high leverage despite the compact size. Particularly favourable for larger crimp cross sections.
왘 good handling thanks to favourable handle position, low weight, short design and ergonomically shaped handles 왘 all stressed parts are made of special steel, oil-hardened and tempered 왘 head burnished, with twocolour dual component handles
왘 transmission of force optimum due to lever action for fatiguereduced operation 왘 good handling due to 20° angled head, low weight and short design 왘 all stressed parts are made of special steel, oil-hardened and tempered
97 52 14
Article-No. 9 EAN-
9 Range of Application
9 Capacity
Code 4003773-
97 52 14
026808
97 52 20
026853
97 59 14
026976
110 www.crimping.info
mm2 non-insulated open 0.1 - 1.5 plug-type connectors 2.8+4.8 mm COAX- BNC- and TNC- connectors SW 1.72 mm for conductors, shield 5,4 mm for RG 58, shield 6,48 mm for RG 59/62/71/223 locator for 97 52 14
AWG 27 - 15
Length mm g 195 375 195
375
20
Model 97 52 14: 왘 available as accessory: locator for non-insulated plug connectors
97
97 Self-Adjusting Crimping Pliers
for End Sleeves (ferrules) 왘 for crimping end sleeves (ferrules) according to DIN 46228 parts 1 + 4 왘 for solder-free electrical connections 왘 lateral loading of the end sleeves (ferrules) into the tool 왘 simple handling as a result of self-adjustment to the size of the end sleeve (ferrule) 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 high operation comfort thanks to handy shape and low weight 왘 all stressed parts are made of special steel, oil-hardened and tempered
with lateral access, patented
97 53 04 square crimp 0.08 - 10.0 mm2
The Self-Adjusting Crimping Pliers for end sleeves (ferrules) adjusts automatically to the connector size desired in one profile. This means comfortable, reliable and fast crimping.
Model 97 53 04: 왘 square crimping for optimum contact areas in the clamp connection Model 97 53 14: 왘 heaxagonal crimping for optimum positioning in confined areas
97 53 14 hexagonal crimp 0.08 - 6.0 mm2
Article-No. 9 EAN-
9 Range of Application
9 Capacity
Code 4003773-
97 53 04
028017
97 53 14
041474
end sleeves (ferrules) end sleeves (ferrules)
mm2 0.08 - 10
AWG 28 - 7
Length mm g 180 380
0.08 - 6.0
28 - 10
180
400
Square-crimped end sleeves (ferrules) ensure good contact zones regardless of the position in the terminal connector
The section shows clearly that the square crimping produces a better contact than the trapezoidal crimping. The hexagonal crimping comes close to the space saving round shape and guarantees optimum contact in narrow round terminal connectors, in contrast to square crimping of the same cross-section
www.crimping.info 111
97
97 Self-Adjusting Crimping Pliers
for End Sleeves (ferrules) 왘 for crimping end sleeves (ferrules) according to DIN 46228 parts 1 + 4 왘 for solder-free electrical connections 왘 front loading of the end sleeves (ferrules) into the tool 왘 simple handling as a result of self-adjustment to the size of the end sleeve (ferrule) 왘 with square crimping for optimum contact areas in the clamp connection 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 high operation comfort thanks to handy shape and low weight 왘 all stressed parts are made of special steel, oil-hardened and tempered
with front loading, patented
97 53 08 square crimp 0,08 - 10,0 mm2
97 53 09
square crimp 0,08-10,0 +16 mm2
Article-No. 9 EAN-
9 Range of Application
9 Capacity
mm2 0.08 - 10.0
Length mm g 190 475
Code 4003773-
97 53 08
040187
97 53 09
044550
Front loading of end sleeves (ferrules) e. g. in switchboards
112 www.crimping.info
end sleeves (ferrules) end sleeves (ferrules)
97 53 08: Lateral loading of end sleeves (ferrules) e. g. in confined areas
AWG 28 - 7
0.08 - 10.0 +16 28 - 7+5 190 475
Square crimping for optimum contact zones
The Self-Adjusting Crimping Pliers for end sleeves (ferrules) with front and lateral loading allows secure and comfortable working even in confined areas.
Model 97 53 08: 왘 crimping from 0.08 - 10.0 mm2 in one profile 왘 end sleeves (ferrules) up to 2.5 mm2 can also be loaded parallely from the side Model 97 53 09: 왘 crimping from 0.08 - 10.0 and 16.0 mm2 in one profile 왘 with selector lever for setting the crimping area either to 0.08 - 10 mm2 or 16 mm2
97
97 Parallel Crimping Pliers,
for Micro Plugs 왘 parallel crimping performance to satisfy the particularly high standards of small connectors 왘 for solder-free electrical connections 왘 repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 fixed locator for D-Sub micro plugs for an exact positioning of connector and cable
97 54 24
Article-No. 9 EAN-
9 Head
9 Handles
9 Range of Application 9 Capacity
Code
Length mm2 AWG D-Sub, 0.03 - 0.56 32-20 D-Sub HD 20 and D-Sub-HDE plugs
4003773-
97 54 24
060215
왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmission of force due to toggle lever for fatigue-reduced operation 왘 crimping pliers for other mini plugs as e. g. HD 22, Modu IV, Micro Timer, MQS, .. on request 왘 all stressed parts are made of special steel, oil-hardened and tempered
burnished with two-colour dual component handles
97
190
g 290
97 Crimping Pliers for End Sleeves (ferrules) 왘 for crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 in an area of application from 0.25 up to 2.5 mm2 왘 crimping in marked trapezoidal dies for secure connections between the sleeve and the conductor 왘 Vanadium steel, oil-hardened and tempered
97 62 145 A
Article-No. 9 EANLength mm
9 Style
9 Head
9 Handles 9 Range of Application 9 Capacity
Code 4003773-
97 61 145 A 024149
polished
97 61 145 F
027218
polished
97 62 145 A 060154
polished
plastic coated plastic coated two-colour dual component
end sleeves (ferrules) end sleeves (ferrules) end sleeves (ferrules)
97
mm2 0.25 - 2.5
23 - 13
g 140
0.25 - 2.5
23 - 13
140
0.25 - 2.5
23 - 13
165
AWG
97 Crimping Pliers for End Sleeves (ferrules) 왘 for crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 from 0.25 to 16 mm2 왘 crimping in marked half-round dies for secure connections between the sleeve and the conductor
97 72 180
Article-No. 9 EANLength mm
9 Head
9 Handles
9 Range of Application
왘 9 extremely deep troughs with conical side faces 왘 special tool steel, oil-hardened and tempered
9 Capacity
Code 4003773-
97 71 180
040668
polished
97 72 180
060195
polished
plastic coated two-colour dual component
end sleeves (ferrules) end sleeves (ferrules)
mm2 0.25-16.0
AWG
23-5
g 265
0.25-16.0
23-5
305
www.crimping.info 113
97
97 Crimping Pliers for End Sleeves (ferrules) with front loading 왘 for crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 from 0.5 to 6.0 mm2 왘 ideal for work in confined areas, e. g. in narrow and deep switch boxes 왘 special tool steel, oil-hardened and tempered
97 81 180
Article-No. 9 EANLength mm
97 81 180
9 Head
9 Handles
9 Range of Application
9 Capacity
Code 4003773-
019794
polished
plastic coated
end sleeves (ferrules)
mm2 0.5 - 6.0
AWG 20 - 10
g 240
front view
97
97 Crimp Assortments, for cable connectors
왘 in a TANOS MINI-systainer™ (solid plastic box) 왘 two stackable plastic inserts with 6 trays each for connectors
왘 with an assortment of standard cable connectors Model 97 90 00: 왘 with Crimp Grip Pliers 97 00 215 A Model 97 90 01: 왘 with Crimping Pliers 97 32 225
97 90 00
97 90 01 several boxes can be connected with each other
Article-No.
0 EAN0 Code
97 90 00
4003773025375
97 90 01
025382
0 Crimping Pliers 0
97 00 215 A
0 25 Terminals each 0
style and description as per Article-No. 97 99 - 01/02/04/07/09/14/16/ 17/21/34/35
97 32 225
systainer™ is a registered trademark of TANOS GmbH 114 www.crimping.info
g 1450 1180
Connectors see page 117
97
97 Crimp Assortments, for end sleeves (ferrules) 왘 in a TANOS MINI-systainer™ (solid plastic box) 왘 two stackable plastic inserts with 6 trays each for connectors 왘 with an assortment of end sleeves (ferrules) with/without collar
Model 97 90 10: 왘 with Self-Adjusting Insulation Stripper 12 40 200 and Self-Adjusting Crimping Pliers for End Sleeves (ferrules) 97 53 04 왘 end sleeves (ferrules) with collar
Model 97 90 05: 왘 with Crimping Pliers for End Sleeves 97 71 180 왘 end sleeves (ferrules) without collar
97 90 09
97 90 06
Model 97 90 09: 왘 with Self-Adjusting Crimping Pliers for End Sleeves (ferrules) 97 53 04 왘 end sleeves (ferrules) with collar
Model 97 90 12: 왘 with Self-Adjusting Insulation Stripper 12 40 200 and Self-Adjusting Crimping Pliers for End Sleeves (ferrules) 97 53 08 왘 end sleeves (ferrules) with collar
Model 97 90 06: 왘 with Crimping Pliers for End Sleeves 97 71 180 왘 end sleeves (ferrules) with collar Model 97 90 07: 왘 with Crimping Pliers for End Sleeves 97 61 145 F 왘 end sleeves (ferrules) without collar
97 90 10
Article-No.
Model 97 90 08: 왘 with Crimping Pliers for End Sleeves 97 61 145 F 왘 end sleeves (ferrules) with collar
97 90 12
97 90 23
97 90 24 0 EAN0 Code
97 90 05
4003773025535
97 90 06
025542
0 Pliers 0
0 Terminals each 0 500 300 9 mm2
mm2
97 71 180
026877 026990 028574 97 53 04
97 90 10 97 90 12 97 90 23
046202 97 53 04
12 40 200
97 53 08
12 40 200
048916 062158 97 52 38
97 90 24
062394 97 53 08
9
200
9
150
mm2 mm2 0.5/0.75/ 4.0/6.0 1.0/1.5/2.5 0.5/0.75/ 2.5 1.0/1.5
9
100 mm2
9
75 mm2
4.0/6.0
9
50 mm2 10.0/ 16.0 10.0
12 42 195
9
40 mm2
g 945
16.0
1015 830
0.5/0.75/ 1.0/1.5
97 61 145 F
97 90 09
0.5/0.75/ 1.0/1.5/2.5
97 61 145 F
97 90 08
Model 97 90 24: 왘 with Self-Adapting Universal Insulation Stripper "Multistrip 10" 12 42 195 왘 with Self-Adjusting Crimping Pliers for End Sleeves (ferrules) 97 53 08 왘 end sleeves (ferrules) with collar
several boxes can be connected with each other
97 71 180
97 90 07
Model 97 90 23: 왘 with Crimping Pliers "PreciForce" for End Sleeves (ferrules) 97 52 38 왘 end sleeves (ferrules) with collar
2.5 0.5/0.75/ 1.0/1.5/2.5 0.5/0.75/1.0/ 1.5/2.5 0.5/0.75/1.0/ 1.5 / 2.5 0.5/0.75/1.0/ 1.5/2.5 0.5/0.75/1.0/ 1.5/2.5
840 4.0/6.0
10.0
1170
4.0/6.0
10.0
1360
4.0/6.0
10.0
1430
4.0/6.0 4.0/6.0
1220 10.0
1355
systainer™ is a registered trademark of TANOS GmbH www.crimping.info 115
97
97 Crimp Assortments,
for cable connectors 왘 in a TANOS MINI-systainer™ (solid plastic box) 왘 two stackable plastic inserts with 6 trays each for connectors 왘 with an assortment of standard cable connectors
several boxes can be connected with each other
97 90 21
Article-No.
Model 97 90 21: 왘 with Crimping Pliers "PreciForce" 97 52 36 (for insulated terminals and plug connectors) Model 97 90 22: 왘 with Self-Adapting Universal Insulation Stripper "Multistrip 10" 12 42 195 왘 with Crimping Pliers "PreciForce" 97 52 36 (for insulated terminals and plug connectors)
97 90 22
0 EAN0 Code
97 90 21
4003773062134
97 90 22
062141
0 Crimping Pliers 0
0 25 terminals each 0 style and description as per Article-No. 97 99 01/02/14/15/
0 20 terminals each
97 99 21/22/36
g 1420
97 52 36
16/17/18/34/35 97 52 36
12 42 195
systainer™ is a registered trademark of TANOS GmbH
116 www.crimping.info
1550
Style
Female Sockets
Male Connectors Round Sockets Round Pin Plugs Flat Pin Accessory Distributors Cable Connectors, eye type
Cable Connectors, forked
Round Pattern Cable Connectors Insulated Butt Connectors Two-Way-Sockets Accessory Distributors End Sleeves (ferrules)
End Sleeves (ferrules) with collar
Non-insulated Plug Connectors
0 Article-No. 0
0 EAN-Code 0
97 99 01 97 99 02 97 99 03 97 99 04 97 99 05 97 99 06 97 99 07 97 99 08 97 99 09 97 99 10 97 99 11 97 99 12 97 99 13 97 99 14 97 99 15 97 99 16 97 99 17 97 99 18 97 99 19 97 99 20 97 99 21 97 99 22 97 99 23 97 99 24 97 99 25 97 99 26 97 99 27 97 99 28 97 99 29 97 99 30 97 99 31 97 99 32 97 99 33 97 99 34 97 99 35 97 99 36 97 99 37
4003773025559 025566 025573 025580 025597 025603 025610 025627 025634 025641 025658 025665 025672 025689 025696 025702 025719 025726 025733 025740 025757 025764 025771 025788 025795 025801 025818 025825 025832 025849 025856 025863 025870 025887 025894 025900 025917
97 99 38
025924
97 99 40 97 99 41 97 99 42 97 99 43 97 99 44 97 99 45 97 99 46 97 99 47 97 99 48 97 99 49 97 99 70 97 99 71 97 99 72 97 99 73 97 99 74 97 99 75 97 99 76 97 99 77 97 99 78 97 99 79 97 99 92 97 99 93 97 99 95 97 99 96
025931 025948 025955 025962 025979 025986 025993 026006 026013 026020 024248 024255 024262 024279 024286 026037 026044 026051 026068 026075 031123 031130 031147 031154
0 wide x 0 thick mm2 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 8.0 x 0.8 6.3 x 0.8 6.3 x 0.8 – – – – 6.3 x 0.8 6.3 x 0.8
– – – – – – 6.3 x 0.8 6.3 x 0.8
2.8 4.8 6.3 6.3
0 plug 0 ø mm
0 cable 2 0 mm
– – – – – – 4.0 5.0 4.0 5.0 – – 3.0* 4.0* 5.0* 4.0* 5.0* 6.0* 8.0* 5.0* 6.0* 8.0* 10.0* 3.0* 4.0* 5.0* 4.0* 5.0* 5.0* 6.0* – – – – – – –
0.5 - 1.0 1.5 - 2.5 4.0 - 6.0 1.5 - 2.5 0.5 - 1.0 1.5 - 2.5 0.5 - 1.0 1.5 - 2.5 0.5 - 1.0 1.5 - 2.5 0.5 - 1.0 1.5 - 2.5 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0 1.5 - 2.5 1.5 - 2.5 1.5 - 2.5 1.5 - 2.5 4.0 - 6.0 4.0 - 6.0 4.0 - 6.0 4.0 - 6.0 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0 1.5 - 2.5 1.5 - 2.5 4.0 - 6.0 4.0 - 6.0 0.5 - 1.0 1.5 - 2.5 4.0 - 6.0 0.5 - 1.0 1.5 - 2.5 4.0 - 6.0 –
– Length mm 6.0 6.0 6.0 7.0 7.0 9.0 10,0 12.0 12.0 18.0 8.0 8.0 8.0 8.0 8.0 10.0 12.0 12.0 12.0 16.0
– 0.5 0.75 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25.0 0.5 0.75 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25.0 1.5 1.5 1.5 2.5
0 AWG 0 20-17 15-13 11-10 15-13 20-17 15-13 20-17 15-13 20-17 15-13 20-17 15-13 20-17 20-17 20-17 15-13 15-13 15-13 15-13 11-10 11-10 11-10 11-10 20-17 20-17 20-17 15-13 15-13 11-10 11-10 20-17 15-13 11-10 20-17 15-13 11-10
0 colour
red blue yellow blue red blue red blue red blue red blue red red red blue blue blue blue yellow yellow yellow yellow red red red blue blue yellow yellow red blue yellow red blue yellow
0 0 75 50 25 50 75 75 25 25 75 50 25 25 100 100 100 100 50 50 50 25 25 25 25 100 100 75 75 50 25 25 100 100 25 50 50 25 25 50
20 18 17 15 13 11 10 7 5 3 20 18 17 15 13 11 10 7 5 3 15 15 15 13
white grey red black blue grey yellow red blue yellow
200 200 200 200 200 150 150 50 50 50 200 200 200 200 200 150 150 50 50 50 150 150 100 100
* Ø for screws
www.crimping.info 117
Testing electrical insulation After submersion in water for 24 hours, the tools are tested with AC 10,000 V for 3 minutes including measuring of the leakage current. The reading of the leakage current must stay below the limits defined in the standards.
Testing low temperature impact strength The tools are cooled down to – 25°C. The insulation material must retain the toughness necessary to ensure that it does not break when hit or knocked.
Testing dielectric strength Each KNIPEX insulated tool has been tested individually. This individual testing is done with a test voltage of AC 10,000 volts. This test load, which is 10 times as high as the maximum permitted voltage during work, inspires the user to trust a reliable insulation when live working. Testing the adhesion of the insulating coating The adhesion of the insulation coating is tested after storage for 168 hours at 70°C. In case of pliers a tensile load of 500 N is applied. The insulating material must remain firmly bonded to the basic tool.
Testing burning behaviour KNIPEX uses only flame-resistant and self-extinguishing plastics for insulation.
Testing indentation resistance The insulation heated to 70°C must prove under standardised test conditions that the warm plastic has sufficient mechanical strength to resist expected loads.
Insulated tools KNIPEX insulated tools – 100% tested, one by one When working on electrical installations, the safest is to disconnect these systems from the energy supply first. Only a skilled and qualified electrician may work on live installations and then only in conformance with the relevant industrial safety standards, in Germany, e. g. VDE 0105, and international standards, e. g. EN 50110 or IEC 60364. He must also use special tools which have been specifically produced and tested for this kind of work.
Handle Insulation (Finish 6) KNIPEX pliers with the two-colour dual component handle insulation meet the requirements of VDE 0682 part 201 and corresponding international standards (e. g. EN 60900 or IEC 60900). This claim is confirmed by the VDE/GS mark awarded by an obligatorily neutral inspection office.
KNIPEX insulated tools are made of high-quality materials, which have been manufactured and tested in conformance with the regulations of national and international standards. If the descripted methods for live working, e. g. DIN VDE 0105, EN 50110, IEC 60364, are observed, these tools offer the best possible protection when it is necessary to work live up to AC 1000 V (alternating current) and DC 1500 V (direct current). Since 1987 the IEC 60900 has specified worldwide requirements for tools for live working. EN 60900 made these mandatory for the EU countries since 1st Aug. 1995. Tests on tools which bear the special mark include subjecting them to routine tests up to 10,000 volts to check their dielectric strength. Efficient insulation is guaranteed when touching live parts up to 1,000 volts.
The and marks identify KNIPEX insulated tools as being suitable for live working. The standard also specified shows the requirements against which this can be verified. The manufacturer name KNIPEX on the insulation indicates that we accept responsibility for the correctness of these information. This is important because the purchase of insulated tools is a matter of trust.
IEC 60900 DIN EN 60900
The slip guard is designed to prevent any spark-over from the non-insulated working head to the hand.
Dipped Insulation (Finish 7) KNIPEX pliers with dipped insulation meet all requirements set by the VDE standard and corresponding international standards (e. g. IEC 60900 and DIN EN 60900). They bear the VDE/GS mark. Because of their shape, tools such as open end wrenches, box wrenches, socket wrenches, ratchets, etc., are insulated by coating with plastics in a dipping process. To offer a complete range of tools for live working in a similar design, KNIPEX insulated pliers are also availabe in a dipped insulated version.
The observation of these requirements is monitored not only by the KNIPEX quality assurance team but also e. g. by VDE (Association of German Electricians). Sample tests, manufacturing inspections and stock control by the neutral VDE inspection office.
The firmly bonded double dipped insulation is made of insulating material which is free of harmful substances and more than 1 mm thick at each point.
Extra thick insulation at the ends of the handle. This prevents cracks following an impact.
Always follow the statutory regulations and obey the SAFETY INSTRUCTIONS given below: 왘 Always transport your tools for live working in a manner that prevents any damage to the insulation. 왘 Check before every use wether the insulation is damaged and discard any defective tools found. 왘 Always keep your insulated tools clean and dry. 왘 Wear protective goggles when working with cutting nippers or working overhead. 왘 Make sure the working area is clean and orderly when you are working live.
왘 Wear protective clothing and use safety equipment (e. g. insulating gloves, insulating mats, protective handles), – especially in confined working areas. 왘 Use the right tool size. This prevents the tool slipping on the work piece and unintentional contact with non-insulated parts. 왘 Make sure that loose parts and cut-off ends of cables do not fall onto live parts.
119
01
01 Combination Pliers,
Chrome Vanadium DIN ISO 5746 IEC 60900 DIN EN 60900
01 06 190
Article-No. 9 EANLength mm
9 Head
9 Handles
9 Cutting capacities
Code 4003773-
01 06 160
040729
190
040415
chrome plated chrome plated
insulated with two-colour dual component handles VDE-tested
02
ø mm ø mm ø mm mm2 2.0 1.5 10.0 16.0
g 210
2.5
300
2.0
13.0 25.0
왘 for heaviest duty 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft, hard and piano wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 particularly wear resistant gripping jaws; hardness of the gripping jaws approx. 53 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered
02 High Leverage Combination Pliers DIN ISO 5746 IEC 60900 DIN EN 60900 왘 for heaviest duty 왘 35% saving in power due to new, improved lever action 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft, hard and piano wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 high grade special tool steel, oil-hardened and tempered
02 06 200
02 07 225
Article-No. 9 EANLength mm
02 06 180 200 225 02 07 200 225 120
9 Head
9 Handles
9 Cutting Capacities
Code 4003773-
010012 010029 010036 022299 022305
chrome plated chrome plated
insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested
ø mm 2.5 2.8 3.0 2.8 3.0
ø mm 2.0 2.2 2.5 2.2 2.5
ø mm mm2 11.5 16.0 13.0 25.0 14.0 25.0 13.0 25.0 14.0 25.0
g 240 335 405 385 490
KNIPEX High Leverage Combination Pliers with optimum position of the joint facilitate cutting as well as powerful gripping, bending and pulling.
Requires 35 % less effort Cutting a hard wire of 2.0 mm dia. with a High Leverage Combination Plier of 180 mm length requires handforce of only 318 N (31.8 kp) instead of 486 N (48.6 kp) with a common Combination Plier of same length.
03
03 Combination Pliers 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft and hard wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. ca. 60 HRC 왘 special tool steel, oil-hardened and tempered
DIN ISO 5746 IEC 60900 DIN EN 60900
03 06 180
03 07 200
Article-No. 9 EANLength mm
03 06 160 180 200 03 07 160 180 200 250
9 Head
9 Handles
9 Cutting Capacities
Code 4003773-
021902 021926 033776 015307 015314 015321 015345
chrome plated chrome plated
insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested
11
ø mm 3.1 3.4 3.8 3.1 3.4 3.8 3.8
ø mm 2.0 2.2 2.5 2.0 2.2 2.5 2.5
ø mm mm2 10.0 16.0 12.0 16.0 13.0 16.0 10.0 16.0 12.0 16.0 13.0 16.0 15.0 25.0
g 220 265 335 265 305 380 610
11 Wire Strippers 왘 for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10.0 mm2 cable cross section 왘 easy adjustment to the required diameter of the solid or stranded wire with knurled screw and lock nut 왘 special tool steel, oil-hardened and tempered
IEC 60900 DIN EN 60900
11 06 160
Style 0: 왘 with opening spring Style 1: 왘 without opening spring
11 07 160
Article-No. 9 EANLength mm
9 Style
9 Head
9 Handles
Code 4003773-
11 06 160
021933
0
chrome plated
11 07 160
015499
1
11 17 160
015505
1
chrome plated chrome plated
insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested plastic dipped insulated VDE-tested
9 Stripping capacities
ø mm mm2 AWG g 5.0 10.0 7.0 165
5.0
10.0 7.0
195
5.0
10.0 7.0
195
121
14
14 Diagonal Insulation Stripper IEC 60900 DIN EN 60900 왘 the essential plier for electrical installation work 왘 precision stripping holes for single (solid) conductors of 1.5 and 2.5 mm2
14 26 160
Article-No. 9 EANLength mm
14 26 160
왘 induction hardened precision blades for soft wire up to 4.0 mm dia., cutting edge hardness approx. 60 HRC 왘 Vanadium electric steel, oil-hardened and tempered
9 Head
9 Handles
9 Cutting capacities
Code 4003773-
040279
chrome plated
insulated with two-colour dual component handles VDE-tested
20
mm2 1.5 + 2.5
AWG 15 + 13
g 210 Multi-functional: cutting and stripping
20 Flat Nose Pliers 왘 short, flat jaws 왘 serrated gripping surfaces 왘 special tool steel, oil-hardened and tempered
DIN ISO 5745 IEC 60900 DIN EN 60900
20 06 160 L3
T1
Article-No. 9 EANLength mm
20 06 160
122
9 Head
9 Handles
9 Dimensions
Code
L3
W3
4003773-
mm
mm
mm
30.0
17.0
9.5
033783
chrome plated
insulated with two-colour dual component handles VDE-tested
T1
g 175
W3
22
22 Round Nose Pliers 왘 for forming wire loops 왘 precision ground, short, round jaws 왘 smooth tips 왘 special tool steel, oil-hardened and tempered
DIN ISO 5745 IEC 60900 DIN EN 60900
22 06 160
22 07 160
Ø D1
Article-No. 9 EANLength mm
9 Head
9 Handles
4003773-
22 06 160
033790
chrome plated
22 07 160
015901
chrome plated
insulated with two-colour dual component handles VDE-tested plastic dipped insulation VDE-tested
25
9 Dimensions
Code
25 Chain Nose Side Cutting Pliers,
L3 mm 30.0
W3 mm 18.0
D1 ø mm 3.0
g 170
30.0
18.0
3.0
205
W3
Radio Pliers 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 high grade special tool steel, oil-hardened and tempered
DIN ISO 5745
IEC 60900 DIN EN 60900 왘 suitable for gripping and cutting work in precision mechanics 왘 pointed, half-round jaws 왘 serrated gripping surfaces 왘 with cutting edges for medium hard wire and hard wire
25 06 160
L3
T2
W4
L3 T1 W3
25 26 160
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377325 06 160 033806
0
chrome plated
25 26 160
2
chrome plated
052111
40°
9 Handles
insulated with two-colour dual component handles VDE-tested insulated with two-colour dual component handles VDE-tested
9 Cutting capacities
9 Dimensions
mm 2.5
mm 1.6
L3 mm 50.0
W3 T1 W4 T2 mm mm mm mm g 16.5 9.5 3.0 2.5 150
2.5
1.6
50.0
16.5 9.5
3.0
2.5
150
123
26
26 Chain Nose Side Cutting Pliers,
Stork Beak Pliers
DIN ISO 5745
26 16 200 왘 high loadable, elastic precision points 왘 half-round, long jaws 왘 serrated gripping surfaces 왘 with cutting edges for medium hard wire max. dia. 3.2 mm and hard wire max. dia. 2.2 mm 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 Vanadium steel, oil-hardened and tempered
Style 1: straight jaws
26 27 200 Style 2: 40° bent jaws
Article-No. 9 EAN-
9 Handles
3
Code g 205
4003773-
26 16 200
022831
26 17 200
016069
26 26 200
022855
26 27 200
9 Head
1
chrome plated chrome plated chrome plated
2 40°
016090
30
chrome plated
30 Long Nose Pliers
insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested
23
Length mm
9 Style
KNIPEX Snipe Nose Side Cutting Pliers (Stork Beak Pliers) are forged from Vanadium steel and are carefully hardened. The slim precision tips withstand high demands, particularly bending loads.
2.5
IEC 60900 DIN EN 60900
73
225 9.5
205 17.5
225
without side cutter DIN ISO 5745
왘 heavy duty and wear resisting 왘 different jaw styles 왘 Chrome Vanadium electric steel, oil-hardened and tempered
IEC 60900 DIN EN 60900
30 16 160
Style 1: 왘 long, trapezoidal jaws 왘 serrated gripping surfaces
Style 1: long, trapezoidal jaws
Style 3: 왘 long, round jaws 왘 smooth gripping surfaces
30 36 160 Style 3: long, round jaws
T2
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377330 16 160 001904
30 36 160
124
002123
1
chrome plated
3
chrome plated
9 Handles
insulated with two-colour dual component handles VDE-tested insulated with two-colour dual component handles VDE-tested
W1
9 Dimensions L3
W3
T1
W4
T2
mm
mm
mm
mm
mm
46.5 16.5 9.5
3.0
g 5.0 155
L3 T1 W3
41.0 16.5 9.5
5.0
2.5 145
70
70 Diagonal Cutters DIN ISO 5749 IEC 60900 DIN EN 60900
왘 the indispensable diagonal cutter for all-round use 왘 high quality material and precise workmanship for long service life 왘 precision cutting edges for soft and hard wire 왘 clean cutting at cutting edge tips, also in case of thin copper wires 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC
70 06 160
70 07 160
Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377370 06 125 018124 140 040293 160 021995 180 033813 70 07 160 018155 180 018179 70 26 160 018223
0
2
chrome plated
chrome plated chrome plated
9 Handles
insulated with two-colour dual component handles VDE-tested plastic-dipped VDE-tested insulated with two-colour dual component handles
74
9 Cutting capacities
ø mm ø mm ø mm 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 4.0 2.8 2.0 4.0 3.0 2.5 4.0 VDE-tested
g 120 160 210 255 240 285 210
The cutting edges of KNIPEX Diagonal Cutters – made of Vanadium steel – have a long service life, are machined highly precise and are very sharp - for a clean cut of soft and hard wires. 왘 narrow head style for use in confined areas 왘 Vanadium electric steel, oil-hardened and tempered Style 0: 왘 with bevel Style 2: 왘 with small bevel
Slim head style and precise cut at blade tips: Advantageous when working in confined areas
74 High Leverage Diagonal Cutters DIN ISO 5749 IEC 60900 DIN EN 60900 왘 with forged-on axle for heaviest duty 왘 suitable for all types of wire including piano wire 왘 high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape 왘 precision cutting edges additionally inductionhardened, cutting edge
74 06 200 fixed, forged-on axle
74 07 200 Article-No. 9 EAN- 9 Head Length Code mm 400377374 06 160 040705 180 022985 200 033820 250 041955 74 07 200 018414 250 018421
9 Handles
chrome plated
insulated with two-colour dual component handles
chrome plated
VDE-tested plastic dipped insulated VDE-tested
9 Cutting capacities ø mm 3.4 3.8 4.2 4.6 4.2 4.6
ø mm 2.5 2.7 3.0 3.5 3.0 3.5
ø mm 2.0 2.2 2.5 3.0 2.5 3.0
g 215 260 305 440 340 475
The choice of material (Chrome Vanadium), lever ration and cutting edge angle mean that KNIPEX - High Leverage Diagonal Cutters are particularly designed for the cutting of hard wires. Fixed, forged-on articulated axle for work under continuous stress.
hardness approx. 64 HRC 왘 the 250-mm-long diagonal cutter is suitable for copper conductors up to 16 mm2 and aluminium conductors up to 35 mm2 왘 Chrome Vanadium electric steel, oil-hardened and tempered
125
86
86 Pliers Wrench,
Pliers and Wrench in a single tool 왘 excellent for gripping, holding, pressing and bending workpieces 왘 for careful installation of finished-surface components 왘 zero backlash jaw surface pressure prevents damage to edges of sensitive components 왘 fast adjustment by pushing a button directly on the workpiece 왘 no unintentional shift of the gripping jaws and no slipping of the joint 왘 replaces a complete set of spanners 왘 parallel jaws allow infinitely variable gripping of all widths to the specified maximum size
patented
86 07 250
86 07 250: Scale for presetting the opening width apart from the workpiece
Article-No. 9 EANLength mm
86 07 250
9 Head
9 Handles
Code 4003773-
065067
nickel plated
9 Working Capacities
9 Dimensions
Zoll plastic dipped insulated 1 3/4 , VDE-tested
88
88 KNIPEX-"Alligator",
mm 46
Water Pump Pliers 왘 box-joint design: high stability because of double guide 왘 self-locking on pipes and nuts: no slipping on the workpiece; low handforce required 왘 guard prevents operators' fingers being pinched 왘 favourable lever action: optimum transmission of force 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 Chrome Vanadium electric steel, oil-hardened and tempered
DIN ISO 8976 IEC 60900 DIN EN 60900
88 07 250
Length mm
9 Head
9 Capacities for pipes
for nuts
1 1/2
Inch 36
g 370
1 1/2 2
36 46
415 635
4003773-
039303
chrome plated
88 07 250 300
019343 022350
chrome plated
126
9 Handles
Code
88 06 250
왘 the action of the jaws allows screwed connections to be tightened and released quickly using the ratchet principle 왘 lever transmission greater than 10 - 1 for strong gripping power 왘 also for tile breaking
B1 B2 B3 mm mm mm g 8.0 8.0 14.0 600
88 06 250
Article-No. 9 EAN-
The patented Pliers Wrench is a multi functional fastening, gripping and holding tool with fast adjustment pushing a button. The high lever ratio, parallel jaws without profile and infinitely variable adjustment guarantee a secure and smooth gripping of the workpiece free from any backlash.
insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested
mm (across flats)
92
92 Precision Tweezers IEC 60900 DIN EN 60900 왘 tested according IEC 60900: 2004 왘 plastic dipped insulated 왘 nickel plated
92 27 61
Model 92 27 61: 왘 for ultra fine mounting work 왘 extra fine tips 왘 straight pattern 왘 gripping surfaces mattfinished for optimum grip Model 92 27 62: 왘 straight pattern 왘 gripping surfaces with fine transverse serration Model 92 37 64: 왘 bent tips 왘 gripping surfaces with fine transverse serration
92 37 64
92 27 62
92 67 63 Model 92 67 63: 왘 straight pattern 왘 serrated gripping surfaces
Article-No. 9 EAN-
9 Finish
Code
Length mm 130 150 150 145
4003773-
92 27 61 92 27 62 92 37 64 92 67 63
054757 054764 054856 054931
plastic dipped insulated IEC 60900: 2004
95
g 30 35 35 40
95 Cable Shears IEC 60900 DIN EN 60900 왘 for cutting copper conductors single wire up to 16 mm2, multiple wire up to 50 mm2, fine strand up to 70 mm2 and aluminium conductors multiple wire up to 70 mm2
95 06 230
Article-No. 9 EANLength mm
95 06 230
9 Head
9 Handles
9 Cutting capacity
왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 easy cutting with one-hand operation due to high transmission ratio 왘 no crushing, slight deformation of the cable only 왘 with guard 왘 adjustable screw joint 왘 stainless – special grade – steel, oil-hardened and tempered
Code ø mm 16
4003773-
006305
bright polished
plastic insulated
mm2 50
AWG 1/0
g 275
VDE-tested
127
95
95 Cable Shears IEC 60900 DIN EN 60900 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 easy cutting with one-hand operation 왘 with guard 왘 adjustable screw joint, self-locking 왘 forged 왘 special tool steel, oil-hardened and tempered
95 16 165
Article-No. 9 EANLength mm
95 16 165
9 Head
9 Cutting capacity
Code 4003773-
039648
chrome plated
Cut performed with a Diagonal Cutter: high effort required, inaccurate cut, considerable deforming and crushing of the cable
128
9 Handles
insulated with two-colour dual component handles VDE-tested
Cut performed with a Cable Shear: easy, clean cut without any deformation of the cable
ø mm 15
mm2 50
AWG 1/0
g 255
95
95 Cable Shears
with twin cutting edge
patented
IEC 60900 DIN EN 60900
95 16 200
왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 easy cutting with one-hand operation 왘 initial and final cut (upper and lower blade) allows cables of up to 20 mm dia. to be cut 왘 low handforce required due to favourable lever ratio and new blade geometry 왘 with guard
95 17 200
Article-No. 9 EANLength mm
9 Head
9 Handles
KNIPEX Cable Shears with twin cutting edge are designed for cutting cables up to 20 mm dia. Even in case of large cable cross sections handles are always in a favourable position due to initial and final cut.
왘 adjustable screw joint, self-locking 왘 forged 왘 special tool steel, oil-hardened and tempered
9 Cutting capacity
Code 4003773-
95 16 200
026761
chrome plated
95 17 200
026952
chrome plated
insulated with two-colour dual component handles VDE- tested plastic dipped insulated VDE- tested
ø mm 20
mm2 70
AWG 2/0
g 345
20
70
2/0
380
Initial cut Final cut
Initial cut: using the upper cutting edge, an ergonomic handle opening is guaranteed even in case of large cable diameters
Final cut: if higher handforce is required, an additional cut can be done with the cutting edge profile near the joint. Initial cut with the upper cutting edge – final cut with the lower cutting edge
129
95
95 Cable Shears IEC 60900 DIN EN 60900 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 low handforce required due to favourable lever ratio and new blade geometry 왘 short design, length only 500 mm 왘 low weight 왘 with guard 왘 adjustable screw joint 왘 cutter head forged from Vanadium steel, oil-hardened and tempered 왘 handles made of high resistant aluminium pipes
95 17 500
Article-No. 9 EANLength mm
95 17 500
9 Head
9 Handles
The Cable Shears in compact and low weight construction (up to 1,000 g less in weight than comparable cable shears) for cable diameters up to 27 mm. Easy and clean cut due to high lever transmission and optimum blade geometry.
Requires 32 % less effort Cutting a multiple wire cable 5 x 50 mmÇ with these high transmission KNIPEX Cable Shears (length 500 mm) requires handforce of only 560 N (56.0 kp) instead of 830 N (83.0 kp) with Cable Shears 95 21 600 (length 600 mm).
9 Cutting capacity
Code 4003773-
026785
polished
plastic dipped insulated
95
ø mm 27
mm2 150
AWG 5/0
g 1360
95 Cable Shears IEC 60900 DIN EN 60900 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation
95 27 600
Article-No. 9 EANLength mm
95 17 500 95 27 600 95 29 600 130
9 Head
9 Handles
9 Cutting capacity
Code 4003773-
026785 021797 021803
polished plastic dipped insulated polished VDE-tested spare cutter for 95 27 600
ø mm 27 27
mm2 150 150
AWG 5/0 5/0
g 1360 2300 365
왘 favourable transmission ratio due to double lever 왘 with guard 왘 adjustable screw joint 왘 replaceable, forged cutter head 왘 cutter head made of special tool steel, oil-hardened and tempered
95
95 Cable Cutters,
Ratchet Action
patented
IEC 60900 DIN EN 60900 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 one-hand operation using ratchet principle
95 36 280
Article-No. 9 EANLength mm
9 Head
9 Handles
9 Cutting capacities
왘 little handforce required due to optimum transmission ratio 왘 two-stage ratchet drive for easy cutting 왘 simple handling as a result of low weight and compact design - can be used even in confined areas 왘 with guard 왘 special grade tool steel
Model 95 36 280: 왘 suitable for aluminium sector cable up to 4 x 150 mm2
Code 4003773-
95 36 250 280
026884 026891
95 39 250 95 39 280
022244 025283
lacquered
insulated with two-colour dual component handles VDE-tested spare moving blade spare moving blade
ø mm 32 52
mm2 240 380
MCM 500 750
g 560 735 130 260
Ratchet principle and two-stage ratchet drive for easier cutting.
95
95 Wire Rope and Cable Cutter IEC 60900 DIN EN 60900 왘 for wire ropes and steel rods, copper and aluminium cables 왘 suitable for cutting overhead cables with strain relief wire 왘 angular cutting blades allow cutting of single rope wire 왘 optimum transmission ratio for high cutting performance
95 77 600
Article-No. 9 EANLength mm
9 Head
9 Handles
9 Cutting capacities
왘 low weight 왘 replaceable cutter head 왘 high-strength aluminium handles 왘 cutter head made of special grade tool steel, oil-hardened and tempered
Code 4003773-
95 77 600
025313
95 79 600
025337
polished
plastic dipped insulated VDE-tested spare cutter head
mm2 150
ø mm 14
ø mm AWG g 9 5/0 2250
131
98
98 Open End Wrenches IEC 60900 DIN EN 60900
98 00 14
Open End Wrenches Imperial sizes
Article- 0 Width across 0 EANNo. 0 flats S 0 Code mm
98 00
07 08 09 10 11 12 13 14 15 16 17 18 19 22 24 27
왘 jaw 15° angled 왘 basic tool chrome plated 왘 forged from Chrome Vanadium steel 왘 tested according to DIN EN/IEC 60900: 2004
DIN 7446
4003773019824 019831 019848 019893 019909 019923 019930 019947 019954 019961 019978 019985 019992 020004 020011 020028
0 Length 0 Head width 0 Head Hickness 0 l max* 0 b max* 0 a max* mm 105 105 105 105 120 125 130 135 145 155 155 160 165 190 210 215
mm 20.0 22.0 24.0 27.0 30.0 32.0 34.0 35.0 37.0 38.0 42.0 44.0 47.0 52.0 56.0 63.0
mm 4.0 4.0 4.0 5.0 5.5 5.5 6.5 6.5 7.0 7.0 8.0 8.0 9.0 9.0 9.0 9.0
g 30 30 35 40 60 60 65 80 85 110 110 140 150 200 280 310
ArticleNo.
0 EAN0 Code
98 00 1/4” 98 00 5/16” 98 00 3/8” 98 00 7/16” 98 00 1/2” 98 00 9/16” 98 00 5/8” 98 00 3/4”
0 Width across 0 flats
4003773019886 020073 020042 020097 019879 020110 020080 020035
INCH 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4
0 Length 0
INCH 4 1/4 4 1/4 4 1/4 4 3/4 5 1/2 6 6 1/2 7
g 30 35 40 60 60 85 110 150
* complies with the non-insulated basic tool
98
98 Box Wrenches 왘 cranked 왘 basic tool chrome plated 왘 forged from Chrome Vanadium steel 왘 tested according to DIN EN/IEC 60900: 2004
DIN 7447 IEC 60900 DIN EN 60900
98 01 14 Article- 0 Width across 0 EANNo. 0 flats S 0 Code mm
98 01
132
4003773-
0 Length 0 l max* mm
0 Head width 0 b max* mm
07 020134 160 12.0 08 020141 165 14.0 09 020158 170 15.5 10 020196 175 17.0 11 020202 180 18.5 12 020226 190 18.5 13 020233 200 21.5 14 020240 210 23.0 15 020257 215 24.0 16 020264 215 26.0 17 020271 220 27.0 18 020288 220 29.0 19 020295 240 30.0 22 020301 260 35.0 24 020318 280 38.0 * complies with the non-insulated basic tool
0 Head Hickness 0 a max* mm 7 7 8 9 10 10 11 12 12 12 13 13 14 15 16
0 Depth of crank 0 h max* mm 18 19 19 20 21 23 23 24 24 26 26 28 28 30 30
g 50 50 75 80 90 120 130 150 165 185 190 235 250 265 355
98
DIN 7445
98 Nut Drivers with handle
S d
IEC 60900 DIN EN 60900
98 03 10
Article- 0 Width 0 EANNo. 0 across flats 0 Code 98 03
S mm 05.5 06 07 08 09
0 Length 0 Blade 0 0 length
4003773- mm
026082 026099 026105 024095 026112
230 230 235 235 235
0 Handle 0 Head 0 length 0 dia.
mm 125 125 125 125 125
mm 105 105 110 110 110
ø mm 11 12 14 15 16
98
g 70 70 110 110 110
Article- 0 Width 0 EANNo. 0 across flats 0 Code 98 03
S mm 10 11 12 13
with fixed T-Handle S d
0 Length 0 Blade 0 0 length
4003773- mm
026129 026136 026143 026150
235 235 235 235
0 Handle 0 Head 0 length 0 dia.
mm 125 125 125 125
mm 110 110 110 110
ø mm 17 19 20 21
g 110 160 160 165
왘 special tool steel, oil-hardened and tempered 왘 VDE tested according to DIN EN/IEC 60900: 2004
DIN 7440
98 Nut Drivers
왘 ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force 왘 handle design prevents rolling 왘 VDE tested according to DIN EN/IEC 60900: 2004 왘 high-alloy chrome vanadium/molybdenum steel
IEC 60900 DIN EN 60900
98 04 13
Article- 0 Width 0 EANNo. across flats 0 0 Code 98 04
S mm 10 13 17 19 22
0 Length 0 Handle 0 0 width
4003773026167 026198 026211 020424 026228
mm 200 200 200 200 200
mm 155 155 155 155 155
98
0 Head 0 dia.
ø mm 19,5 23,5 28,5 31,0 34,5
g 350 375 450 570 615
Article- 0 Width 0 EANNo. across flats 0 0 Code 98 05
S mm 13 17 19
DIN 7439
98 Screwdrivers for hexagon socket screws
IEC 60900 DIN EN 60900
S
98 13 30
Article- 0 Width 0 EAN- 0 Length 0 Blade No. across flats 0 0 Code 0 0 length S mm 4003773- mm mm 98 13 2.5 026334 175 75 3.0 026341 180 75 4.0 026358 180 75
98
98 Screwdrivers
0 Length of 0 Handle non-insulated 0 0 length blade mm mm 15 15 15
100 105 105
40 45 40
0 Length 0 Handle 0 0 width
4003773026273 026297 026303
mm 300 300 300
mm 155 155 155
0 Head 0 dia.
ø mm 23,5 28,5 31,0
g 435 580 750
왘 ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force 왘 handle design prevents rolling 왘 VDE tested according to DIN EN/IEC 60900: 2004 왘 high-alloy chrome vanadium/molybdenum steel
Article- 0 Width 0 EAN- 0 Length 0 Blade No. across flats 0 0 Code 0 0 length S mm 4003773- mm mm 98 13 5.0 026365 185 75 6.0 026372 210 100
0 Length of 0 Handle non-insulated 0 0 length blade mm mm 15 15
110 110
65 80
with T-Handle
for hexagon socket screws
IEC 60900 DIN EN 60900
S
왘 special tool steel, oil-hardened and tempered 왘 tested according to DIN EN/IEC 60900: 2004
98 15 08
Article- 0 Width 0 EANNo. 0 across flats 0 Code 98 14
S mm 05 06 08
0 Length 0 Length of non- 0 T-Handle 0 0 insulated blade ±2 0 width
4003773- mm
020431 020448 020455
120 120 120
mm 9 10 11
mm 90 90 90
g 195 200 270
Article- 0 Width 0 EANNo. 0 across flats 0 Code 98 15
S mm 05 06 08
0 Length 0 Length of non- 0 T-Handle 0 0 insulated blade ±2 0 width
4003773- mm
020479 020486 020493
250 250 250
mm 9 10 11
mm 90 90 90
g 325 330 440
133
98
98 Screwdrivers DIN 7437
for slotted screws
IEC 60900 DIN EN 60900
98 20 55
Article- 0 Blade No. 0 width mm
98 20
98 21
2.5 3.0 3.5 4.0 5.5 6.5 8.0 10.0 4.5
0 EAN0 Code 4003773062325 062332 024217 026402 024224 026419 024231 026396 026426
0 Blade 0 thickness mm 0.4 0.5 0.6 0.8 1.0 1.2 1.2 1.6 0.8
0 Length 0 mm 175 200 200 200 230 265 295 320 285
98
0 Blade 0 length mm 75 100 100 100 125 150 175 200 180
0 Length of non- 0 Handle 0 insulated blade 0 length mm 15 15 15 15 15 15 15 15 15
mm 100 100 100 100 105 110 120 120 105
g 25 25 35 35 60 90 150 220 60
왘 ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force 왘 handle design prevents rolling 왘 VDE tested according to DIN EN/IEC 60900: 2004 왘 high-alloy chrome vanadium/ molybdenum steel Model 98 21 45: 왘 especially for meter assembly with blade length of 180 mm
98 Screwdrivers for cross recessed Phillips® screws
IEC 60900 DIN EN 60900
98 24 03
Article- 0 Size No. 0 No.
98 24
00 01 02 03 04
왘 ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force 왘 handle design prevents rolling 왘 VDE tested according to DIN EN/IEC 60900: 2004 왘 high-alloy chrome vanadium/ molybdenum steel
DIN 7438
0 EAN0 Code 4003773026433 026440 026457 026464 026471
0 Length 0 mm 160 185 210 270 320
0 Blade 0 length mm 60 80 100 150 200
98
98 Screwdrivers
0 Length of non- 0 Handle 0 insulated blade 0 length mm 15 15 20 20 20
mm 100 105 110 120 120
g 25 40 70 150 220
DIN 7438
for cross recessed Pozidriv® screws IEC 60900 DIN EN 60900
98 25 03
Article- 0 Size No. 0 No.
98 25
134
00 01 02 03 04
0 EAN0 Code 4003773062370 031260 031277 031284 062387
Phillips® is a registered Trademark of Phillips Screw Company
0 Length 0 mm 160 185 210 270 320
0 Blade 0 length mm 60 80 100 150 200
0 Length of non- 0 Handle 0 insulated blade 0 length mm 15 15 20 20 20
mm 100 105 110 120 120
g 40 50 65 140 170
왘 ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force 왘 handle design prevents rolling 왘 VDE tested according to DIN EN/IEC 60900: 2004 왘 high-alloy chrome vanadium/ molybdenum steel Pozidriv® is a registered Trademark of Ind. Serv. Ltd.
98
98 T-Handle Drives with driving square 1/2”
왘 for use with sockets 왘 basic tool chrome plated 왘 for quick, easy and secure locking of attached sockets 왘 special tool steel 왘 square oil-hardened and tempered 왘 tested according to EN/IEC 60900: 2004
DIN 7436 IEC 60900: 2004 DIN EN 60900
98 40
Article-No. 9 EAN-
9 Handle length
98 40
4003773-
mm
026501
165
98
9 Square drive
Code
Length mm 200
1 " 2
g 590
98 Reversible Ratchets with driving square 3/8” or 1/2”
왘 for use with sockets 왘 reversible for clockwise and anti-clockwise directions 왘 extremely smooth action 왘 for quick, easy and secure locking of attached sockets 왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900: 2004
DIN 7449 IEC 60900: 2004 DIN EN 60900
98 31 Article-No. 9 EAN-
Length mm 190 265
4003773-
98 31 98 41
3 " 8
026495 026518
98
9 Square drive
Code
1 " 2
g 325 600
98 Extension Bars with internal and driving square 3/8” or 1/2”
왘 for use with sockets 왘 with internal and external square 왘 forged 왘 for quick, easy and secure locking of attached sockets 왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900: 2004
DIN 7434 IEC 60900: 2004 DIN EN 60900
98 35 125
98 35 250 Article-No. 9 EANLength Code mm 400377398 35 125 020530 250 020547 98 45 125 020813 250 020820
9 Square drive
3 " 8
3 " 8
1 " 2
1 " 2
g 140 260 210 430
135
98
98 Hexagon Sockets
with internal square 3/8” or 1/2” for hexagon screws
왘 for metric and imperial hexagonal head screws 왘 basic tool chrome plated 왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900: 2004
DIN 7448 IEC 60900: 2004 DIN EN 60900
98 37 17
S d
Hexagon Sockets imperial sizes
Article- 0 Width across 0 EANNo. 0 flats S 0 Code mm
98 37
98 47
10 11 12 13 14 17 19 10 11 12 13 14 16 17 18 19 22 24 27
0 dia of effective 0 tool side d max.
4003773020578 020585 020608 020615 020622 020639 020646 020882 020899 020912 020929 020943 027287 020967 027294 020974 020981 020998 021001
0 Square 0 drive
ø mm 18.7 20.0 21.7 22.5 23.7 27.5 30.0 19.5 20.7 23.0 23.2 24.5 26.9 28.2 29.0 30.7 34.5 37.0 41.0
g 30 30 45 35 40 60 75 60 60 60 65 65 70 70 80 100 125 155 180
3 " 8
1 " 2
98
ArticleNo.
0 EAN0 Code
0 Width across 0 flats
4003773020684 020677 020707 020554 020721 020691 020660 020875 021094 021063 020905 021018 021087 020868
98 37 5/16” 98 37 3/8” 98 37 7/16” 98 37 1/2” 98 37 9/16” 98 37 5/8” 98 37 3/4” 98 47 1/2” 98 47 9/16” 98 47 5/8” 98 47 11/16” 98 47 3/4” 98 47 7/8” 98 47 1”
INCH 5/16 3/8 7/16 1/2 9/16 5/8 3/4 1/2 9/16 5/8 11/16 3/4 7/8 1
0 Square drive 0
3 " 8
1 " 2
g 35 35 35 40 40 40 70 55 60 60 70 90 120 165
98 Screwdriver Socket Wrenches 왘 for metric internal hexagonal head screws 왘 basic tool chrome plated 왘 tested according to EN/IEC 60900: 2004
with internal square 3/8” or 1/2” for hexagon screws IEC 60900: 2004 DIN EN 60900
98 39 06
S
Article- 0 Width across No. 0 flats S mm
98 39 98 49
136
05 06 05 06 08
0 EAN0 Code 4003773020776 020783 021155 021162 021179
0 Length 0 mm 75 75 75 75 75
0 Length of non0 Square 0 insulated blade ± 2 0 drive mm 9 10 9 10 11
3 " 8
1 " 2
g 55 60 90 90 90
98
98 Reversible Ratchet with driving square 1/2”
DIN 7449 IEC 60900: 2004 DIN EN 60900
98 42
Article-No. 9 EAN-
Length mm 265
4003773-
98 42
9 Square drive
Code 1 " 2
026525
g 600
98
왘 reversible for clockwise and anti-clockwise directions 왘 easy and secure locking of attached sockets due to screw lock 왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900: 2004
98 Torque Wrench with driving square 1/2”, reversible IEC 60900: 2004 DIN EN 60900
98 43 Article-No. 0 EAN0
0 Range of 0 application
Code 4003773-
98 43
026532
8 - 54 Nm
0 Square 0 drive
1 " 2
Length mm 325
g 900
98
왘 reversible for clockwise and anti-clockwise directions 왘 transparent insulated scale range 8 - 54 Nm 왘 lockable torque adjustment 왘 easy and secure locking of attached sockets due to screw lock 왘 calibration certificate included
왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900: 2004
98 Cable Knife IEC 60900 DIN EN 60900 왘 solid, fixed straight blade 왘 blade oil-hardened and tempered 왘 handle with slip guard 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900: 2004
98 52
Article-No. 9 EAN4003773-
98 52
022541
9 Blade length
Code mm 50
Length mm 180
g 70
with protective cap
137
98
98 Dismantling Knife IEC 60900 DIN EN 60900
98 53 03
Article-No. 9 EAN-
9 Blade length
4003773-
98 53 03
026549
mm 28
9 Radius
Code mm 7
왘 solid, fixed hook blade 왘 blade oil-hardened and tempered 왘 handle with slip guard 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900: 2004
Length mm 155
g 70
98
with protective cap
98 Dismantling Knife IEC 60900 DIN EN 60900
98 53 13 Article-No. 9 EAN-
9 Blade length
Code 4003773-
98 53 13
026556
mm 50
9 Radius mm 40
Length mm 180
g 70
98
왘 narrow, fixed hook blade, sickle shaped 왘 suitable for sector cables 왘 blade oil-hardened and tempered 왘 handle with slip guard 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900: 2004
with protective cap
98 Cable Knife IEC 60900 DIN EN 60900
98 54
Article-No. 9 EAN4003773-
98 54
026563
9 Blade length
Code mm 50
Length mm 180
g 75
98
왘 solid, fixed straight blade 왘 blade oil-hardened and tempered 왘 back of the blade plastic coated to avoid short circuit 왘 handle with slip guard 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900: 2004
with protective cap
98 Dismantling Knife IEC 60900 DIN EN 60900
98 55 Article-No. 9 EAN4003773-
98 55 138
022558
9 Blade length
Code mm 38
Length mm 155
g 90
with protective cap
왘 solid, fixed hook blade, sickle shaped 왘 with guide shoe at the blade point 왘 no damage of the conductor insulation 왘 blade made of stainless steel, vacuum hardened 왘 handle with slip guard 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900: 2004
98
98 Cable Knife IEC 60900 DIN EN 60900
98 56 Article-No. 9 EAN4003773-
98 56 98 56 09
026570 030829
9 Blade length
Code mm 50 spare blade
98
98 Voltage Tester
Length mm 185
g 65
왘 solid, fixed straight blade 왘 replaceable specially ground blade 왘 blade made of stainless steel 왘 with hinged blade guard, integrated in the handle, captive
왘 back of the blade plastic coated to avoid short circuit 왘 handle with slip guard 왘 VDE tested according to DIN EN/IEC 60900: 2004
with load application
DUSPOL® compact
IEC / EN 61243-3 DIN VDE 0682-401
98 60 04
Article-No. 9 EAN-
9 Length
Code 4003773-
98 60 04
051961
mm 1400
g 185
98
왘 LED display shows direct and alternating current levels 12, 24, 50, 120, 230, 400 and 750 V 왘 polarity test with direct voltage 왘 identifying the phase conductor against the protective conductor (PE) in alternating voltage 왘 load application to suppress inductive and capacitive voltage at ls ⱕ 200 mA
왘 VDE tested according to DIN EN/IEC 61243-3
DUSPOL® is a registered Trademark of Benning, Elektrotechnik + Elektronik GmbH & Co. KG
98 Insulating Flat Nose Plier from plastic
DIN EN 60900: 1997
98 62 200 Article-No. 9 EANLength mm
98 62 200
왘 especially for meter assembly and meter blocking 왘 fully insulating to avoid short circuits 왘 fibreglass reinforced plastics 왘 tested according to DIN EN 60900: 1997
Code 4003773-
021186
g 90
139
98
98 Insulating Plastic Clamp
Article-No. 9 EAN-
98 64 02
021193
mm 15
98
Length mm 150
4003773-
021209 021216 021223
conical
1000 V VDE 0680/1
9 Conductor key
Code
98 65 01 98 65 02 98 65 03
g 65
98 64 02
98 Plastic Slip-On Caps,
Article-No. 9 EAN-
1 2 3
왘 fibreglass reinforced plastics 왘 tested according to VDE 0680/1
9 Clamping capacity
Code 4003773-
1000 V VDE 0680/1
왘 for holding insulating mats in place 왘 with integrated spring 왘 fully insulating to avoid short circuits
Length mm 80 80 80
98
g 7 7 7
왘 for protection against bare live cable ends (max. 10 mm dia.) 왘 plastic 왘 tested according to VDE 0680/1
98 65 01
98 Self-Clamping Slip-On Caps
Article-No. 9 EAN4003773-
021230 021247 021261
9 Inside dia.
Code
98 65 10 98 65 20 98 65 30
1000 V VDE 0680/1
mm 10 20 30
98
Length mm 80 100 110
g 10 30 40
왘 for protection against bare live cable ends 왘 plastic 왘 tested according to VDE 0680/1
98 65 30
98 Electricans` Gloves
Article-No. 9 EAN-
DIN EN/IEC 60903
9 Size
9 10
g 270 280
Code 4003773-
98 65 40 98 65 41 140
021285 021292
왘 for protection when working live or close to live parts 왘 classification: 0 왘 tested according to DIN EN/IEC 60903
98 65 40
98
98 Insulating Mats from rubber
Article-No. 9 EAN-
4003773- mm
026600 026617
9 Dimensions
Code
98 67 05 98 67 10
VDE 0680/1
1000 V
500 x 500 1000 x 1000
98
왘 for protection when working live or close to live parts 왘 tested according to VDE 0680/1
Thickness mm 1.6 1.6
g 460 1940
98 67 05
98 Junior Hacksaw
Article-No. 9 EANCode 4003773-
98 90
028321
IEC 60900 DIN EN 60900
9 saw blade Length mm 150
Length mm 240
왘 saw blade for metal and wood with 25 teeth per inch, exchangeable 왘 tested according to DIN EN/IEC 60900: 2004
g 170
98 90
98
98 Compact Tool Case, with insulated tools for working on electrical installations
Article- 0 EANNo. 0 Code
17 parts IEC 60900 DIN EN 60900
0 Contents: 0 Article 0 Article-No. 0
왘 shock-resistant plastic case 왘 containing a range of conventional insulated KNIPEX tools for working on electrical installations, tested according to DIN EN/IEC 60900: 2004
Length/Size
4003773-
98 99 11 026624
03 07 200 70 07 160 98 20 35 98 20 40 98 20 55 98 24 00 98 42 98 45 125 98 45 250 98 47 10 98 47 11 98 47 12 98 47 13 98 47 14 98 47 17 98 47 19 98 52
Combination Pliers Diagonal Cutter Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, Phillips Reversible Ratchet Extension Bar Extension Bar Hexagon Socket 1 " 2 Hexagon Socket Drive Hexagon Socket Hexagon Socket Hexagon Socket Hexagon Socket Hexagon Socket Cable Knife
200mm 160mm 3.5mm 4.0mm 5.5mm PH 0 265mm 125mm 250mm SW 10mm SW 11mm SW 12mm SW 13mm SW 14mm SW 17mm SW 19mm 180mm
98 99 11 141
98
98 Standard Tool Case,
26 parts
with insulated tools for working on electrical installations
Article- 0 EANNo. 0 Code
IEC 60900 DIN EN 60900
0 Contents 0 Description 0 Article-No. 0
왘 shock-resistant plastic case 왘 containing a range of conventional insulated KNIPEX tools for working on electrical installations, tested according to DIN EN/IEC 60900: 2004
Length/Size
4003773-
98 99 12 026631
03 07 200 70 07 160 98 00 10 98 00 11 98 00 12 98 00 13 98 00 14 98 00 17 98 00 19 98 20 25 98 20 35 98 20 40 98 20 55 98 24 00 98 24 01 98 24 02 98 40 98 47 10 98 47 11 98 47 12 98 47 13 98 47 14 98 47 17 98 47 19 98 52 98 53 03
Combination Pliers Diagonal Cutter Open End Wrench Open End Wrench Open End Wrench Open End Wrench Open End Wrench Open End Wrench Open End Wrench Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, Phillips Screwdriver, Phillips Screwdriver, Phillips T-Handle Drive Hexagon Socket 1 " 2 Hexagon Socket Drive Hexagon Socket Hexagon Socket Hexagon Socket Hexagon Socket Hexagon Socket Cable Knife Dismantling Knife
200mm 160mm SW 10mm SW 11mm SW 12mm SW 13mm SW 14mm SW 17mm SW 19mm 2.5 mm 3.5 mm 4.0 mm 5.5 mm PH 00 PH 01 PH 02 200 mm SW 10 mm SW 11mm SW 12mm SW 13mm SW 14mm SW 17mm SW 19mm 180mm 155mm
98 98 Tool Roll,
15 parts
with insulated tools for working on electrical installations
ArticleNo.
0 EAN0 Code
98 99 12
0 Contents 0 Article-No.
IEC 60900 DIN EN 60900
0 Description 0
Length/Size
4003773-
98 99 13
026648
03 07 200 11 17 160 26 17 200 70 07 160 95 17 200 98 00 10 98 00 13 98 00 14 98 00 17 98 00 19 98 20 25 98 20 40 98 20 55 98 20 65 98 52
142
Combination Pliers Wire Stripper Snipe Nose Side Cutting Pliers Diagonal Cutter Cabel Shears Open End Wrench Open End Wrench Open End Wrench Open End Wrench Open End Wrench Screwdriver Screwdriver Screwdriver Screwdriver Cable Knife
200 mm 160 mm 200 mm 160 mm 200 mm SW 10 mm SW 13 mm SW 14 mm SW 17 mm SW 19 mm 2.5 mm 4.0 mm 5.5 mm 6.5 mm 180 mm
98 99 13
왘 tool roll of hard-wearing polyester fabric 왘 with practical, adjustable quick-release fastener 왘 containing a range of conventional insulated KNIPEX tools for working on electrical installations,, tested according to DIN EN/IEC 60900: 2004
98
Model 99 Concretor’s Nippers see Page 55
98 Universal Tool Case BIG TWIN,
46 parts
with insulated tools for working on electrical installations
Article- 0 EANNo. 0 Code
0 Contents 0 Article 0 Article-No. 0
IEC 60900 DIN EN 60900
Length/Size
4003773-
98 99 14 026655
00 21 40 T 062981
03 07 200 Combination Pliers 200mm 11 17 160 Wire Stripper 160mm 70 07 160 Diagonal Cutting Nipper 160mm 88 07 250 Water Pump Pliers ”Alligator“ 250mm 95 17 200 Cable Shear 200mm 98 00 10 Open End Wrench SW 10mm 98 00 13 Open End Wrench SW 13mm 98 00 14 Open End Wrench SW 14mm 98 00 17 Open End Wrench SW 17mm 98 00 19 Open End Wrench SW 19mm 98 00 22 Open End Wrench SW 22mm 98 01 10 Box Wrench SW 10mm 98 01 13 Box Wrench SW 13mm 98 01 14 Box Wrench SW 14mm 98 01 17 Box Wrench SW 17mm 98 01 19 Box Wrench SW 19mm 98 01 22 Box Wrench SW 22mm 98 20 25 Screwdriver, for slotted screws 2.5mm 98 20 40 Screwdriver, for slotted screws 4.0mm 98 20 55 Screwdriver, for slotted screws 5.5mm 98 20 65 Screwdriver, for slotted screws 6.5mm 98 40 T-Handle Drive 165mm 98 42 Reversible Ratchet 265mm 98 45 125 Extension Bar 125mm 98 45 250 Extension Bar 250mm 98 47 10 Hexagon Socket SW 10mm 98 47 11 Hexagon Socket SW 11mm 1 " 2 98 47 12 Hexagon Socket SW 12mm Drive 98 47 13 Hexagon Socket SW 13mm 98 47 14 Hexagon Socket SW 14mm 98 47 17 Hexagon Socket SW 17mm 98 47 19 Hexagon Socket SW 19mm 98 47 22 Hexagon Socket SW 22mm 98 47 24 Hexagon Socket SW 24mm 98 52 Cable Knife 180mm 98 53 03 Dismantling Knife 155mm 98 64 02 6 Insulating Plastic Clamps 150mm 98 65 40 1 Pair Electricans’ Gloves Size 9 98 67 05 3 Insulating Mats 500 x 500 x 1.6mm Trolley, for the rolling transport of Tool Cases
Model 98 99 14: 왘 ABS hard-shell construction, red, containing a range of conventional insulated KNIPEX tools for working on electrical installations, tested according to DIN EN/IEC 60900, as well as insulating mats, clamps and gloves 왘 sturdy aluminium frame with D-shape rings for belt and fix, sturdy centre board with multi-purpose push-in facilities by elastic loops and 12 small pockets 왘 comfortable handle and mounting device for a ”Trolley” embedded in the bottom (available ordering ref. 00 21 40 T) 왘 metal hinges 왘 30 kg maximum load 왘 can be opened on one or both sides; bottom tray and cover
can be opened independently 왘 stands securely in any opening position due to lid-holders and hinge mechanisms on both sides, that register in a position of 45° and 90° 왘 3-digit lock and 2 clamp-locks for fixation of the cover 왘 removable document compartment and removable tool board, with 13 push-in compartments on one side 왘 2 tilting locks to fix the bottom 왘 base tray, height 58 mm, can be subdivided by flexible inserts; cover plate with 6 large push-in compartments, can be fixed by push-button 왘 ext. dimensions (W x H x D): 490 x 220 x 410 mm int. dimensions (W x H x D): 445 x (105 x 105) x 350 mm
98 99 14
00 21 40 T
Model 00 21 40 T: 왘 telescopic handle for rolling transport 왘 applicable for cases: 00 21 40 LE Tool Case ”BIG TWIN”, 98 99 14 Universal Tool Case 왘 height adjustable handle with catch 왘 integrated mechanism for fixation to the case, for rapid assembly and removal 왘 with 2 smooth running rolls 왘 dimensions: 60 x 245 x 400 (1,000) mm (extended) 143
00 11
00 11 02/03 Control Cabinet Keys
for all standard cabinets and shut-off systems
00 11 03
Article-No. 9 EAN-
9 Capacity
Code mm 6/8 5/6/8
4003773-
00 11 02 00 11 03
048947 041658
mm 9 9
Ø mm
9 9
Length mm 44 76
00 11 for all standard shut-off systems
00 11 04
9 Capacity
Code 4003773-
00 11 04
048954
mm 5/7/8
mm 9
mm 6/7/8/9
Length mm 90
왘 with adapter for 1/4" bits on securing chain 왘 additional bit adapter for 1/4“ bits in one arm 왘 zinc die-casting
왘 key for heating, airconditioning, sanitary and building engineering, e. g. for door and window handles or for air bleeding heaters 왘 female square 5/7/8 mm 왘 triangular 10 mm 왘 male square in steps of 6/7/8/9 mm 왘 with bit insert: slot 1.0 x 7 mm and cross recess PH 2 왘 with adapter for 1/4" bits on securing chain
왘 total length: 90 mm 왘 additional bit adapter for 1/4“ bits in one arm 왘 zinc die-casting
Model 00 11 02: 왘 short execution, total length 44 mm Model 00 11 03: 왘 long execution, total length 76 mm 왘 additional square of 5 mm
g 50 80
00 11 04 Profi-Key
Article-No. 9 EAN-
왘 for control cabinets and shut-off systems in the supply of gas, water and electricity 왘 for technical installations in buildings, e. g. air conditioning and ventilation systems, shut-off valves, mains switch-boards, etc. 왘 square 6 + 8 mm 왘 triangular 9 mm 왘 two-way key bit 5 mm dia. (internal)/9 mm dia. (external) 왘 with bit insert: slot 1.0 x 7 mm and cross recess PH 2
g 75
00 11
00 11 07 Pen-Style Control Cabinet Key for all standard cabinets and shut-off systems
00 11 07
Article-No. 9 EAN-
9 Capacity
Code 4003773-
00 11 07
063018
mm 5/6/8
mm 9
mm 9
Length mm g 145 140
왘 easy to carry pen-style control cabinet key with fastening clip 왘 four different key profiles can be utilized by swivelling the key holder 왘 for control cabinets and shutoff systems in the supply of gas, water and electricity 왘 for technical installations in buildings, e. g. air conditioning and ventilation systems, shutoff valves, mains switchboards, etc. 왘 female square 5; 6 + 8 mm 왘 triangular 9 mm 왘 two-way key bit 5 mm dia.(internal)/ 9 mm dia. (external)
왘 universal 1/4" bit adapter for standard bits (permanent magnet for retaining) 왘 additional bit adapter for 1/4" bits inside one key profile 왘 with bit insert: cross recess PH 2 and possibility of safekeeping a second bit 왘 practical clip for safe transport 왘 corpus and fastening clip made from GRP plastic material; tool holder and key profiles zinc diecast
145
00 11
00 11 08 Pen-style Profi-Key
왘 easy to carry pen-style control cabinet key with fastening clip 왘 three different key profiles can be utilized by swivelling the key holder 왘 multi-purpose key for the builder 왘 key for heating, airconditioning, sanitary and building engineering, e. g. for door and window handles or for air bleeding heaters 왘 female square 5 + 8 mm 왘 triangular 9 mm 왘 male square in steps of 6/7/8/9 mm
for all standard shut-off systems
00 11 08
Article-No. 9 EAN-
9 Capacity
Code 4003773-
00 11 08
063025
mm 5/8
왘 universal 1/4" bit adapter for standard bits (permanent magnet for retaining) 왘 additional bit adapter for 1/4" bits inside one key profile 왘 with bit insert: cross recess PH 2 and possibility of safekeeping a second bit 왘 practical clip for safe transport 왘 corpus and fastening clip made from GRP plastic material; tool holder and key profiles zinc diecast
mm 9
mm 6/7/8/9
Length mm g 145 130
0019 00 19 Sales Displays
왘 for 6, 12 or 24 pliers 왘 small size, minimum space required on the point of sales 왘 with explanatory header 왘 variable assortment on request 왘 when ordering 00 19 14 - 19 do always ask for product specific header (see table) 왘 material: solid cardboard, printed
200 200
200 200
Model 00 19 39: 왘 hook for sales displays see page 152
360 200 110
110
00 19 19
KNIPEX Quality - Made in Germany
KNIPEX Quality - Made in Germany
䊳
Code 4003773-
00 19 14 029625 00 19 17 027362 00 19 19 013365 C 320 00033 C 320 00044 146
86 03 180 86 03 250 87 01 250 for 86 03 for 87 01
9 9 Units
9 9 Width
9 9 Height
mm mm 6 110 200 6 110 200 12 110 200 header available in D, GB, F, E, NL, S, I header available in D, GB, F, E, NL, S, I
9 9 Depth mm 200 200 360
䊳
PUSH·BUT
Pipe grip and spanner in one. 1 max. 30 mm / 15/4" = 87 01 180 36 mm / 1 /8" = 87 01 250
䊳
䊳
䊳
Push-button-action for fast adjustment directly on the workpiece. Selfgripping on pipes and nuts, non-slip during use. Handguard prevents handles from pinching and knuckle busting.
Art.-No. 87 01 180 = Length 180 mm / 7” Art.-No. 87 01 250 = Length 250 mm / 10”
Art.-No. 86 03 180 = length 180 mm / 7” Art.-No. 86 03 250 = length 250 mm / 10”
g 1,820 3,610 3,990 C 320 00033GB
9 Article
A superior tool for gripping, holding and bending workpieces up to 35/46 mm across flats. Parallel action smooth jaws for the gentle assembly of fittings. Fast push button adjustment on the workpiece. The cam action on the gripping jaws allows fast working without adjusting the tool.
N·ACTION
N·ACTION
䊳
TO
TO
3 outstanding features which save time and money!
86 03 180 = max. 35 mm / 13/8" 86 03 250 = max. 46 mm / 13/4"
Article-No. 9 EAN-
”Cobra” Water Pump Plier
Plier Wrench PUSH·BUT
C320 00033
C 320 00044GB
00 19 17
C320 00044
0019 00 19 Test Supports
Model 00 19 20: 왘 for testing the self-locking function of the "Alligator" and "Cobra"water pump pliers 왘 steady stand, high stability 왘 without pliers Model 00 19 20 T: 왘 for testing the self-locking function of the "Alligator" and "Cobra" water pump pliers 왘 collapsible for space saving transport 왘 without pliers
00 19 20
00 19 20 T
00 19 21 T
Article-No. 9 EAN-
9 9 Width
Code
mm 230 148 85
4003773-
00 19 20 00 19 20 T 00 19 21 T
9 9 Height
024637 0231192 027461
mm 165 225 85
9 9 Depth mm 310 135 150
g
1,350 750 720
Model 00 19 21 T: 왘 for testing the ratchet principle of Pliers Wrenches and multiple Slip Joint Spanner 왘 can be fixed on the wall 왘 without pliers
0019 00 19 Rotary Sales Stand 왘 for 16 x 3 pliers 왘 attractive, compact rotary construction for the counter 왘 with 16 hooks 00 19 33 왘 assortment on request
Article-No. 9 EANCode 4003773-
00 19 28
032083
왘 when ordering, do always ask for product detail labels 왘 without pliers 왘 material: sheet steel/ steel wire, white powder coated
9 9 Ø
9 9 Height
mm 400
mm 610
g 6,190
00 19 28
0019 00 19 Sales Display 왘 attractive sales display for presentation of the complete "Cobra"-family 왘 solid style; can be fixed on tool bar systems, also suitable as counter display 왘 with integrated brochure holder for "Cobra" leaflets 왘 with transparent label holders 왘 please do always request leaflets and labels Article-No. 9 EANCode 4003773-
00 19 29
052340
9 9 Width mm 610
for ”Cobra“ Water Pump Pliers
왘 includes 3 "Cobras" each 87 01 150/180/250/300/400/560 왘 material: steel wire, silver powder coated
9 9 Height mm 445
9 9 Depth mm 250
g 20,000
00 19 29 C320 00242
147
0019 00 19 Sales Display
415 mm
왘 for 5 x 6 pliers 왘 small size, minimum space required on the point of sales 왘 with informative header and slide-in strip for product detail labels 왘 assortment on request 왘 when ordering, do always ask for product detail header (see table) and product detail labels 왘 without pliers 왘 material: steel wire, silver powder coated
KNIPEX Quality – Made in Germany
C320 00110
C320 00110, general programme KNIPEX Quality – Made in Germany
C320 00187
00 19 24
C320 00187, Comfort
Article-No. 9 EAN-
9 Header
Code
9 9 Height
mm 325
4003773-
00 19 24 029656 C320 00110 C320 00187 C320 00242
9 9 Width
mm 415
9 9 Depth
KNIPEX Quality – Made in Germany
1000 V
mm 190
g
DIN EN 60 900 IEC 60 900
780
general programme Comfort, for pliers with two-colour dual component handles VDE insulated pliers C320 00242
C320 00242, VDE
0019 00 19 Sales Display
KNIPEX Quality – Made in Germany
KNIPEX Quality – Made in Germany
Ø 12 - 25 mm (J1) Ø 19 - 60 mm (J2)
400 mm
C320 00132
C320 00132, general programme
Ø 10 - 25 mm (A1) Ø 19 - 60 mm (A2)
C320 00231
C320 00231, Precision Circlip Pliers 48/49
KNIPEX Quality – Made in Germany
00 19 25
C320 00187
C320 00176, Comfort
Article-No. 9 EANCode 4003773-
00 19 25 014027 C320 00132 C320 00176 C320 00231 148
9 Header
9 9 Width
9 9 Height
mm 490 general programme Comfort, for pliers with two-colour dual component handles Precision Circlip Pliers 48/49
mm 400
9 9 Depth mm 310
g
3,800
왘 for 8 x 7 pliers 왘 solid style; can be fixed on tool bar systems, also suitable as counter display 왘 with informative header and slide-in strip 왘 assortment on request 왘 when ordering, do always ask for product detail header (see table) 왘 without pliers 왘 material: sheet steel/ steel wire, silver powder coated
0019 00 19 Sales Display 왘 for 3 x 6 pliers 왘 solid style; can be fixed on tool bar systems, also suitable as counter display 왘 with header explanatory 왘 assortment on request 왘 when ordering, do always aks for product detail header (see table) 왘 without pliers
Article-No. 9 EAN4003773-
C 320 00264 C 320 00275 C 320 00286 C 320 00297 C 320 00308 C 320 00319 C 320 00330 C 320 00352 C 320 00363 C 320 00429 C 320 00451 C 320 00462
054450 054467
Model 00 19 34 3: 왘 for finish of pliers 0/1/3/4 Model 00 19 34 4: 왘 for finish of pliers 2/5/6
9 Description
Code
00 19 34 3 00 19 34 4
왘 material: sheet steel/steel wire, silver powder coated
9 9 9 9 Width 9 Height 9 Depth
mm mm for finish 0/1/3/4 240 320 for finish 2/5/6 240 320 High Leverage Pliers Precision Circlip Pliers 48/49 Concretors` Nippers ”Cobra“/Plier Wrench Insulated Pliers, VDE Stripping and Crimping Pliers general programme Slip Joint Spanner Self-Adjusting Insulation Strippers High Leverage Diagonal Cutters 74 12 Cobra ES SmartGrip®
mm g 310 2,110 310 2,110
00 19 34 3
C320 00264
C320 00275
C320 00286
C320 00297
C320 00308
C320 0319
C320 00330
C320 00352
00 19 34 4
C320 00363
C320 00429
C320 00451
C320 00462
149
0019
00 19 Tool Bar (Pegboard) and Accessories
L130 00209
L130 00198
2200 mm
Blister packaging
Carded Packaging: 왘 user friendly presentation 왘 space saving and informative 왘 possibility of testing the pliers 왘 material: solid and firm Clip, reinforced cardboard
1000 mm
00 19 30 Model 00 19 30: 왘 for the promotional, extensive presentation 왘 completely with supports, 5 peg boards, shelf and illuminated transparent advertising facia 왘 can be equipped either with self-service packaging pliers holders and/or sales displays Article-No. 9 EAN-
왘 with power cable and 230 V plug 왘 material: sheet steel / steel tubing, silver powder coated Model 00 19 30 3: 왘 without illuminated facia
9 Description
Code 4003773-
00 19 30 00 19 30 2 00 19 30 21 00 19 30 3 00 19 30 6 00 19 30 66 00 19 30 7 L130 00198 L130 00209 150
024644 046783 066460 052524 034506 055211 034810 049234 049241
tool bar with illuminated facia illuminated facia illuminated facia tool bar without illuminated facia self-adhesive plastic label tool bar without illuminated facia advertising facia Comfort-guidance label VDE-guidance label
Model 00 19 30 66: pliers holders and/or sales 왘 for the space saving presentation displays 왘 completely with supports, 5 왘 material: sheet steel/ steel peg boards, shelf; without tubing, silver powder coated illuminated transparent advertising facia 왘 with magnetic advertising facia 왘 can be equipped either with self-service (carded) packaging,
9 9 Width
9 9 Height
mm 1000 1000 1000 1000 1300 660 1300 980 980
mm 2200 200 200 2200 200 2200 200 100 100
9 9 Depth mm 500 400 400 500 500
g 68,050 11,450 11,450 56,600 60 39,990 40 60 60
00 19 30 66
00 19 30 2
00 19 30 21
Model 00 19 30 2/21: 왘 illuminated facia for tool bar systems 왘 solid aluminium frame with transparent plastic advertising facia, power cable and 230 V plug / series plug
2200 mm
Model 00 19 30 6: 왘 self-adhesive plastic label 왘 suitable for 1,000 and 1,300 mm wide promotional surfaces
Model 00 19 30 7 왘 advertising facia made of 0.5 mm sturdy plastic 왘 suitable for 1,000 and 1,300 mm wide promotional surfaces
0019 00 19 Show-Cabinets 왘 with two glass sliding doors, lockable 왘 illumination unit with plug for series connection 왘 with power cable and 230 V plug 왘 material: aluminium section, silver colour
Model 00 19 30 VIT: 왘 hanging show-cabinet for assembly to tool bar systems 왘 with shelf, top cover and transparent advertising facia 왘 easy to assemble collapsible frame construction Article-No.
9 EANCode 4003773-
00 19 30 VIT 034186 00 19 30 VIT1 048978 00 19 30 VIT2 048985
for Product Presentation 1000 mm
Model 00 19 30 VIT1: 왘 basic show-cabinet for assembly to tool bar systems 왘 with top cover and transparent advertising facia Model 00 19 30 VIT2: 왘 unit show-cabinet for assembly to tool bar systems, for extension of basic showcabinet 00 19 30 VIT1 왘 with top cover and transparent advertising facia
9 Description
9 9 9 9 Width 9 Height 9 Depth
mm hanging show-cabinet 1000 basic show-cabinet 1000 unit show-cabinet 1000
mm 1200 2070 2070
mm 300 470 470
00 19 30 VIT
00 19 30 VIT 1
00 19 30 VIT 2 151
00 19 00 19 Hooks
00 19 31
Model 00 19 31: 왘 160 mm length 왘 for 6 pliers, with faceplate for label 왘 when ordering, do always ask for product detail labels
for tool bar systems
Model 00 19 33: 왘 90 mm length 왘 for 3 pliers, with with faceplate for label 왘 when ordering, do always ask for product detail labels
00 19 35 1 00 19 35 3
Model 00 19 33 2: 왘 200 mm length 왘 heavy duty for mounting pipe wrenches, etc. 왘 with pivoting clamping device for easy tastening and release
00 19 39
Model 00 19 35 1/3: 왘 200 mm length 왘 for holding self-service packs with Euro standard perforations 왘 with pivoting clamping device for easy tastening and release
00 19 33
00 19 33 2
00 19 35 2
Article-No. 9 EAN-
9 9 Hole spacing
Code 4003773-
00 19 31 00 19 33 00 19 33 2 00 19 35 1 00 19 35 2 00 19 35 3 00 19 39
014874 014881 042112 045168 028284 051787 034827
for 6 pliers for 3 pliers for large size water pump pliers, pipe wrenches, etc. for self-service packs for brochures and carded tools for self-service packs for sales displays 00 19 14 - 00 19 19
Article-No. 9 EANCode 4003773-
00 19 36 152
024682
mm 30 30 30 25 30 30 variable
9 9 Depth mm 160 90 200 200 50 200 200
g
90 70 145 100 10 100 320
Model 00 19 39: 왘 suspension device for sales displays 00 19 14; 00 19 17 for presentation on tool bar systems 왘 material: steel wire, silver powder coated
0019 00 19 Brochure Holder
Model 00 19 35 2: 왘 50 mm length 왘 for holding self-service carded packs and brochures with Euro standard perforations
for tool bar systems 왘 for approx. 250 pcs. A4-size leaflets 왘 material: steel wire, silver powder coated
9 9 Width mm 230
9 9 Height mm 290
9 9 Depth mm 90
g
255
00 19 36
0019 00 19 Pliers Racks
for tool bar systems
왘 for the space saving presentation of pliers on tool bar systems 왘 with slide-in strip for product labels 왘 when ordering, do always ask for product detail labels 왘 material: sheet steel/ wire, silver powder coated Model 00 19 32: 왘 for 3 x 6 pliers Model 00 19 34: 왘 for 5 x 6 pliers Model 00 19 34 1: 왘 for 5 x 6 carded pliers 왘 with header sign
00 19 34
Model 00 19 34 2: 왘 for 15 x 6 pliers
00 19 34 1
Article-No. 9 EAN-
9 9 Width
Code 4003773-
00 19 32 00 19 34 00 19 34 1 00 19 34 2
024651 024668 051824 052364
for 3 x 6 pliers for 5 x 6 pliers for 5 x 6 pliers (carded) for 15 x 6 pliers
mm 195 325 480 995
9 9 Height mm 98 98 200 145
9 9 Depth mm 175 175 225 215
g
380 620 1,000 1,960
00 19 34 2 153
0019 00 19 Tool Roll, 11 parts
왘 for telecommunications and electrical engineers 왘 tool roll of hard-wearing polyester fabric 왘 with practical, adjustable quick release fastener 왘 contains 8 pliers and 3 scewdrivers 왘 pliers with chrome plated heads and two-colour dual component handles 왘 screwdrivers VDE tested according to DIN/IEC 60900
00 19 41 Article-No. 9 EANCode
9 Contents Article
9 9 Units
4003773-
00 19 41
g
024729
1,460 03 05 160 11 15 160 25 05 160 30 15 160 30 35 160 31 15 160 67 05 140 70 05 140 98 20 25 98 20 40 98 24 01
Combination Pliers Wire Stripper Chain Nose Side Cutting Pliers Long Nose Pliers, flat-wide Long Nose Pliers, round Needle Noser Pliers, straight High Leverage End Cutting Nipper Diagonal Cutter Screwdriver, width of blade 2.5 mm Screwdriver, width of blade 4.0 mm Cross Slot Screwdriver, Size 1 (Phillips)
00 19 00 19 Tool Pouch
Article-No. 9 EAN-
9 Arrangement
1 1 1 1 1 1 1 1 1 1 1
왘 for telecommunications and electrical engineers 왘 practical compartments for pliers, screwdrivers and tape rule 왘 with snap hooks and holder for insulation tape 왘 material: hard wearing, strong butt leather
Code 4003773-
00 19 48
154
024767
g
5 pockets
350
00 19 00 19 Circlip Pliers Sets, 4 parts
Code
9 Contents Article
9 9Ø
4003773-
00 19 56
030973
00 19 57
050056
Model 00 19 56: 왘 contains 4 common Circlip Pliers for internal and external circlips
00 19 57 Precision Circlip Pliers
00 19 56 Circlip Pliers Article-No. 9 EAN-
왘 tool roll of hard-wearing polyester fabric 왘 with practical, adjustable quick release fastener
44 11 J2 44 21 J21 46 11 A2 46 21 A21 48 11 J1 48 11 J2 49 11 A1 49 11 A2
straight bent straight bent straight straight straight straight
mm 19 - 60 19 - 60 19 - 60 19 - 60 12 - 25 19 - 60 10 - 25 19 - 60
00 20
9 9 Units
g
1 1 1 1 1 1 1 1
585
Model 00 19 57: 왘 contains common Precision Circlip Pliers for highest requirements
585
00 20 Precision Circlip Pliers Set, 4 parts sturdy plastic packaging
KNIPEX Quality
왘 attractive sales packaging with Euro standard perforation 왘 contains 4 common Precision Circlip Pliers for highest requirements 왘 sturdy plastic packaging, also suitable for storage of the pliers
Made in Germany
00 20 03 SB
ion cis Pre Eingesetzte Spitzen. Inserted tips. Pointes intégrées.
Ø 12 - 25 mm Ø 19 - 60 mm
Nr. 48 11 J1 Ø 12 - 25 mm
Geschraubtes Gelenk. Screw joint. Articulation vissée.
Schlanke Kopfform. Slim head style. Tête très plate.
Nr. 48 11 J2 Ø 19 - 60 mm
Verwindungsfreie Montage. Fit circlips without distortion. Montage sans gauchissement.
Feder / Spring / Ressort
Ø 10 - 25 mm Ø 19 - 60 mm
Nr. 49 11 A1 Ø 10 - 25 mm Nr. 49 11 A2 Ø 19 - 60 mm
Stabile Spitzen. High quality tips. Pointes de haute stabilité.
K N I P E X - WE R K C. Gustav Putsch KG
42334 Wuppertal - Germany www.knipex.de info@knipex.de
00 20 03 SB Articla-No. 9 EANCode
9 Contents Article
4003773-
00 20 03 SB 050100
48 11 J1 48 11 J2 49 11 A1 49 11 A2
9 9Ø mm 12 - 25 19 - 60 10 - 25 19 - 60
9 9 Units 1 1 1 1
155
00 20
00 20 Precision Circlip Pliers Set, 8 parts sturdy plastic packaging
KNIPEX Quality
Made in Germany
왘 attractive sales packaging with Euro standard perforation 왘 contains 8 common Precision Circlip Pliers for highest requirements 왘 sturdy plastic packaging, also suitable for storage of the pliers
on isi ec Pr Eingesetzte Hartstahl-Spitzen Inserted spring steel tips Pointes intégrées en corde à piano
48 11 J1 Ø 12 - 25 mm 48 11 J2 Ø 19 - 60 mm 48 21 J11 Ø 12 - 25 mm 48 21 J21 Ø 19 - 60 mm
Geschraubtes Gelenk Screw joint Articulation vissée
Schlanke Kopfform Slim head style Tête très plate
49 11 A1 Ø 10 - 25 mm 49 11 A2 Ø 19 - 60 mm 49 21 A11 Ø 10 - 25 mm 49 21 A21 Ø 19 - 60 mm
Verwindungsfreie Montage Fit circlips without distortion Montage sans gauchissement
00 20 04 SB
KNIPEX-WERK
Article-No. 9 EANCode
9 Contents Article
9 Tipo
00 19 56
48 11 J1 48 11 J2 49 11 A1 49 11 A2 48 21 J11 48 21 J21 49 21 A11 49 21 A21
Innenliegende Feder Spring inside the joint Ressort intégré
9 9Ø
9 9 Units
mm 12 - 25 19 - 60 10 - 25 19 - 60 12 - 25 19 - 60 12 - 25 19 - 60
4003773-
00 20 04 SB 062417
straight straight straight straight bent bent bent bent
00 20
C308 02035
C. Gustav Putsch KG
42334 Wuppertal - Germany www.knipex.de info@knipex.de
00 20 04 SB
1 1 1 1 1 1 1 1
00 20 Pliers Sets
220 mm
295 mm
왘 attractive sales packaging with Euro standard perforation 왘 material: sturdy cardboard packaging, printed
00 20 10
00 20 11
Article-No. 9 EAN-
9 Description
Code
00 20 12 9 Contents Article
4003773-
00 20 10
010388
00 20 11
012405
Assembly Pack
00 20 12
012412
Elektro Pack
00 20 13
043287
VDE Tool Set
156
Modell 00 20 11: 왘 pliers with two-colour dual component handles
00 20 13 g
Power Pack
02 01 180 74 01 160 87 01 250 03 02 180 26 12 200 70 02 160 03 06 180 26 16 200 70 06 160 26 16 200 70 06 160 WERA 160i 0.6 x 3.5 x 100 WERA 160i 1.0 x 5.5 x 125 WERA 162i PH2 x 100
Modell 00 20 10: 왘 pliers with polished heads and plastic coated handles
940
750
800
885
Modell 00 20 12: 왘 all pliers VDE-tested according , to DIN EN/IEC 60900 pliers finish 6 Modell 00 20 13: 왘 all tools VDE-tested according , to DIN EN/IEC 60900 pliers finish 6
00 20
00 20 Electronics Pliers Sets for working on electronic components
00 20 17 00 20 16
00 20 18 Article-No.
Model 00 20 16: 왘 7 parts, contains 6 electronics pliers and one precision tweezer 왘 case made of hard-wearing polyester fabric, pliers are held by elastic band, with zip fastener Model 00 20 17: 왘 6 parts, contains 6 ESD electronics pliers, electrically discharging version 왘 case made of hard-wearing polyester fabric, pliers are held by elastic band, with zip fastener
Model 00 20 18: 왘 8 parts, contains 2 electronics pliers and 6 electronics screwdrivers 왘 practical storage box, shockresistant plastic, with foam insert Model 00 20 18 ESD: 왘 8 parts, contains 2 electronics pliers and 6 electronics scewdrivers, ESD electrically discharging version 왘 practical storage box, shockresistant plastic, with foam insert
00 20 18 ESD 9 EANCode
9 Contents Article
9 Description
Case for Electronics Pliers
g 610
Case for Electronics Pliers ESD
590
Case for Electronics Pliers
450
Case for Electronics Pliers ESD
450
4003773-
00 20 16
022619
00 20 17
031222
00 20 18
033073
00 20 18 ESD 051848
35 12 115 | 35 22 115 | 35 32 115 | 64 32 120 | 77 02 115 | 77 42 115 | 92 34 36 35 12 115 ESD | 35 22 115 ESD | 35 42 115 ESD | 64 32 120 ESD | 77 02 115 ESD | 77 32 115 ESD 35 22 115 | 77 02 115 | Screwdrivers 0,4 x 2,5/0,5 x 3/0,6 x 3,5/0,8 x 4,0 mm - PH 0/PH 1 35 22 115 ESD | 77 02 115 ESD | Screwdrivers ESD 0,4 x 2,5/0,5 x 3/0,6 x 3,5/0,8 x 4,0 mm - PH 0/PH 1
00 20
00 20 Precision Electronics Pliers Sets
for working on electronic components
Model 00 20 16 P ESD: 왘 6 parts, contains 6 ESD precision electronics pliers, electrically discharging version 왘 case made of hard-wearing polyester fabric, pliers are held by elastic band, with zip fastener
Model 00 20 16 P: 왘 6 parts, contains 6 precision electronics pliers 왘 case made of hard-wearing polyester fabric, pliers are held by elastic band, with zip fastener
00 20 16 P ESD
00 20 16 P Article-No.
9 EANCode
9 Contents Article
9 Description
Case for Precision Electronics Pliers
g 610
Case forPrecision Electronics Pliers ESD
610
4003773-
00 20 16 P
063223
00 20 16 P ESD 063230
34 12 130 | 34 22 130 | 34 32 130 | 79 02 120 | 79 02 125 | 79 42 125 34 12 130 ESD | 34 22 130 ESD | 34 32 130 ESD | 79 02 120 ESD | 79 02 125 ESD | 79 42 125 ESD
157
00 20 00 20 Tool Box, 4 parts
왘 high quality, versatile, shockresistant plastic case 왘 foam insert with honeycomb structure for variable equipment 왘 outside dimensions (H x W x D): 65 x 327 x 275 mm
with VDE tools
Model 00 21 15 LE: 왘 without tools
Model 00 20 15: 왘 all pliers VDE tested according to DIN/IEC 60900 , pliers finish 6
Article-No. 9 EANCode
00 20 15
9 Contents Article
03 06 180 11 06 160 26 16 200 70 06 160 empty
1,490
4003773-
00 20 15
024804
00 21 15 LE 045175
g
532
00 21 00 21 Tool Bag, 24 parts
for electrical contractors, Top Model
ArticleNo.
0 EAN0 Code
0 Contents 0 Contents 0 Article-No. 0 Description
00 21 01 TL
0 Manu0 facturer
0 Nominal 0 size
g 6,560
4003773-
00 21 01 TL 032694 03 06 180 11 06 160 25 06 160 70 06 160 98 52 SB 160i
Combination Pliers Wire Stripper Chain Nose Side Cutting Pliers Diagonal Cutter Cable knife Insulated Screwdriver for slotted screws
KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX WERA
162i
Insulated Screwdriver for Phillips screws Cable Knife with hook blade Junior Hack Saw Screwdriver for slotted screws Voltage Tester with load application Fitters Hammer Chisel Hammer Water Brush Painter’s Knife Metre Rule (inch rule) Electrician’s Chisel Bolster Chisel Plaster Duct
WERA
IEC 60900 DIN EN 60900
16 20 165 98 90 S 334 4115 101 30490800 75040-015 75075-040 71510-000 3612521 3403001 7165/50
158
KNIPEX KNIPEX WERA WERA PICARD PICARD PICARD PICARD PICARD RENNSTEIG RENNSTEIG NÖLLE
180 mm 160 mm 160 mm 160 mm 180 mm 2.5 x 80 mm 3.5 x 100 mm 5.5 x 125 mm 6.5 x 150 mm PH 1/80 mm PH 2/100 mm 165 mm 230 mm 6.0 x 125 mm 6.5 x 150 mm 3.0 x 65 mm 300 g 800 g 40 mm 40 mm 2m 250 x 10 mm 300 mm 125 x 90 mm
왘 contains 24 brand name quality tools, partly VDE tested according to to DIN/IEC 60900 , 왘 comfortable bag of hardwearing leather, with front bag, adjustable retaining loops and belt 왘 with galvanised steel base tray 왘 edges of the tool case reinforced with aluminium 왘 internal dimensions (W x H x D): 420 x 250 x 160 mm
00 21 00 21 Tool Box, 7 parts for electrical contractors
Article-No. 9 EANCode
왘 high quality, versatile, shockresistant plastic case 왘 foam insert with honeycomb structure for variable equipment 왘 outside dimensions (H x W x D): 65 x 327 x 275 mm
Model 00 21 15: 왘 all pliers and screwdrivers except Water Pump Pliers VDE tested according to DIN/IEC 60900 Model 00 21 15 LE: 왘 without tools
9 Contents Article
4003773-
00 21 15
042853
00 21 15 LE 045175
00 21 15
g
03 06 180 26 16 200 70 06 160 88 03 180 WERA 0.4 x 2.5 WERA 0.8 x 4.0 WERA PH1 empty
1,520
532
00 21 00 21 Tool Bag, 24 parts
apprentices tool bag for electrical contractors
ArticleNo.
0 EAN0 Code
0 Contents 0 Contents 0 Article-No. 0 Description
00 21 02 SL
0 Manu0 facturer
0 Nominal 0 size
g 6,960
4003773-
00 21 02 SL 050162 98 52 SB 660i
IEC 60900 DIN EN 60900
00 21 02 LE 057499
662i
Cable Knife Insulated Screwdriver for slotted screws
Insulated Screwdriver for Phillips screws 665i Insulated Screwdriver for Pozidriv screws 03 05 180 Combination pliers 25 05 160 Chain Nose Side Cutting Pliers 70 05 160 Diagonal Cutter 11 05 160 Wire Stripper 16 20 165 Cable Knife with hook blade 98 90 S Junior Hack Saw 247 Voltage Tester 0000 101 Fitters Hammer 0000 401 Mallet 75040-015 Water Brush 75075-040 Painter’s Knife 71501-024 Carpenter’s Pencil 3612521 Electrician’s Chisel 3402501 Bolster Chisel 7165/50 Plaster Duct Tool Bag ”New Classic Basic”, empty
KNIPEX WERA
WERA WERA KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX WERA PICARD PICARD PICARD PICARD PICARD RENNSTEIG RENNSTEIG NÖLLE
180 mm 2.5 x 80 mm 3.5 x 100 mm 5.5 x 125 mm 6.5 x 150 mm PH 1/80 mm PH 2/100 mm PZ 1/80 mm PZ 2/100 mm 180 mm 160 mm 160 mm 160 mm 165 mm 230 mm 3.5 x 100 mm 300 g 1000 g 40 mm 40 mm 24 cm 250 x 10 mm 250 mm 125 x 90 mm
왘 tool bag with side walls and bottom tray made of impact and moisture resistant double wall HDPE material 왘 front, rear and lid made of calf leather, black 왘 semi-fold-out front with adjustable loops and exterior document compartment 왘 front additionally reinforced with aluminium brackets 왘 rear wall with injection-moulded loop holder with 11 loops 왘 handle 왘 internal dimensions (W x H x D): 420 x 250 x 160 mm Model 00 21 02 SL: 왘 contains 24 brand name quality tools, partly VDE tested according to DIN/IEC 60900
2.600
Model 00 21 02 LE: 왘 without tools
159
00 21 00 21 Tool Case “Elektro”,
20 parts 왘 heavy duty ABS material, black 왘 with circumferential double aluminium frame 왘 register hinges working as lid holder 왘 strong, ergonomic handle 왘 2 tilting locks, lockable 왘 1 removable tool board in the lid with 15 push-in compartments on the bottom side and 6 big push-in compartment and a clamp compartment (400 mm width) on the lid side, fixed by push-button 왘 base tray, height 58 mm, can be subdivided by flxible inserts; cover plate with 6 large push-in compartments, can be fixed by push-button 왘 cover and tool plate made of Con-Pearl™ material 왘 20 kg maximum load 왘 internal dimension (W x H x D): 465 x 170 x 310 mm Model 00 21 20: 왘 with 20 brand name tools, partly VDE tested according to DIN/IEC 60900 Model 00 21 20 LE: 왘 without tools
00 21 20
ArticleNo.
0 EAN0 Code
0 Contents 0 Description 0 Article-No. 0
0 Manu0 facturer
0 Nominal 0 size
00 21 20
052166
IEC 60900 DIN EN 60900
03 06 180 26 16 200 26 26 200 70 06 160 74 06 200 95 16 200 98 56 160i
162i 165i
00 21 20 LE 044567
Combination Pliers Snipe Nose Side Cutting Pliers Snipe Nose Side Cutting Pliers, bent Diagonal Cutter High Leverage Diagonal Cutter Cable Shear Cable Knife Insulated Screwdriver for slotted screws for slotted screws for slotted screws for slotted screws for Phillips screws for Phillips screws for Pozidriv screws for Pozidriv screws
12 40 200 Self-Adjusting Insulation Strippers 16 80 125 SB Universal Stripping tool 86 03 180 Pliers Wrench 87 03 250 ”Cobra“ Water Pump Pliers 247 Voltage Tester Tool Case ”Standard”, empty
KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX
180 mm 200 mm 200 mm 160 mm 200 mm 200 mm 185 mm
WERA WERA WERA WERA WERA WERA WERA WERA
2.5 x 0.4 mm 4.0 x 0.8 mm 5.5 x 1.0 mm 6.5 x 1.2 mm PH 1 x 80 mm PH 2 x 100 mm PZ 1 x 80 mm PZ 2 x 100 mm
KNIPEX KNIPEX KNIPEX KNIPEX WERA
200 mm 125 mm 180 mm 250 mm 3 x 70 mm
Con-Pearl® is a registered trademark of PARAT-WERK Schönbach GmbH & Co. KG
160
g 7,750
4003773-
3,600
00 21 00 21 Tool Case for the E-CHECK®, 23 parts
왘 contains 23 brand name quality tools, partly VDE tested according to DIN/IEC 60900 왘 hard-wearing ABS hard-shell construction with aluminium frame and circular buffer protection 왘 document compartment and pen holding straps 왘 1 removable tool plate, with elastic loops on both sides 왘 1 cover plate with elastic loops and tool protection cloth 왘 large base tray with variable separations (e. g. for measuring and testing devices). Internal dimensions: 420 x 320 x 85 mm 왘 sturdy metal locks and 3-digitlock 왘 strong, ergonomic handle 왘 feet on two sides 왘 colour: silver / aluminium look
00 21 30
ArticleNo.
0 EAN0 Code
0 Contents 0 Contents 0 Article-No. 0 Tools
0 Nominal 0 size
g 6,560
4003773-
00 21 30
0 Manu0 facturer
051084 03 06 180 26 16 200 26 26 200 70 06 125 70 06 160 92 27 62 98 56 160i
Combination Pliers KNIPEX 180 mm Snipe Nose Side Cutting Pliers KNIPEX 200 mm Snipe Nose Side Cutting Pliers, bent KNIPEX 200 mm Diagonal Cutter KNIPEX 125 mm Diagonal Cutter KNIPEX 160 mm IEC 60900 Precision Tweezers KNIPEX 150 mm DIN EN 60900 Cable Knife, with protecting cap KNIPEX 180 mm Insulated Screwdriver for slotted screws WERA 2.5 x 80 mm for slotted screws WERA 3.5 x 100 mm for slotted screws WERA 4.0 x 100 mm for slotted screws WERA 5.5 x 125 mm for slotted screws WERA 6.5 x 150 mm for slotted screws WERA 8.0 x 175 mm 162i for Phillips screws WERA PH 0 x 80 mm for Phillips screws WERA PH 1 x 80 mm for Phillips screws WERA PH 2 x 100 mm 165i for Pozidriv screws WERA PZ 1 x 80 mm for Pozidriv screws WERA PZ 2 x 100 mm 00 11 03 Control Cabinet Key KNIPEX 76 mm 12 40 200 Self-Adjusting Insulation Stripper KNIPEX 200 mm 16 80 125 SB Universal Stripping Tool KNIPEX 125 mm 86 03 180 Pliers Wrench KNIPEX 180 mm 87 03 250 ”Cobra“ Water Pump Pliers KNIPEX 250 mm All rights reserved for technical alterations. Testing and measuring devices as well as the Laptop are not included in delivery
The spacious base tray is suitable for holding measuring and testing devices or a Laptop
161
00 21 00 21 Tool Case "Basic",
empty
00 21 05 LE
Article-No. 0 EAN0 Code 4003773-
00 21 05 LE 056904
0 Dimension external 0 (internal) width mm 465 (440)
0 Dimension external (internal) height
00 21 4003773-
00 21 32 LE 057536
mm 480 (460)
0 Dimension external (internal) height
00 21 4003773-
00 21 33 LE 057543
mm 490 (470)
0 Dimension external (internal) depth mm 365 (300
g 4,690
0 Dimension external (internal) height
왘 heavy duty ABS material, black 왘 extra large in height, width and depth 왘 with circumferential double aluminium frame 왘 register hinges working as lid holder 왘 sturdy multi-component handle with grip recesses 왘 2 tilting locks, lockable 왘 document compartment in the cover
0 Dimension external (internal) depth
mm 205 (180)
Con-Pearl® is a registered trademark of PARAT-WERK Schönbach GmbH & Co. KG
162
왘 1 tool board in the lid with CP-7 tool holder (thickness 11 mm) on the lid side and CP-7 tool holder (thickness 15 mm) on the bottom side 왘 base tray, height 58 mm, can be subdivided by flexible inserts; cover plate with CP-7 tool holder (thickness 25 mm) on the lid side, can be fixed by push-button 왘 cover and tool plate made of Con-Pearl® material 왘 30 kg maximum load 왘 internal dimension (W x H x D): 465 x 170 x 310 mm
empty
00 21 33 LE
0 Dimension external 0 (internal) width
g 5,700
왘 heavy duty ABS material, black 왘 with circumferential double aluminium frame 왘 register hinges working as lid holder 왘 sturdy multi-component handle with grip recesses 왘 2 tilting locks, lockable 왘 document compartment in the cover 왘 1 removable tool board in the lid with CP-7 tool holder (thickness 11 mm) on the bottom side
mm 180 (165)
00 21 Tool Case "Classic III",
Article-No. 0 EAN0 Code
mm 410 (350)
왘 removable tool board in the lid with 9 push-in compartments and an elastic loop on the lid side; with 10 slim and one large push in compartments on the bottom side 왘 base tray, height 55 mm, can be subdivided by inserts; cover plate with 12 large push-in compartments and a flat compartment, can be fixed by push-button 왘 load capacity: 15 kg 왘 exterior dimensions (W x H x D): 465 x 200 x 410 mm interior dimensions (W x H x D): 440 x 180 x 350 mm
empty
00 21 32 LE
0 Dimension external 0 (internal) width
0 Dimension external (internal) depth
mm 200 (180)
00 21 Tool Case "Classic II",
Article-No. 0 EAN0 Code
왘 heavy duty ABS material, black 왘 circumferential aluminium frame with D-shape rings for the annexed shoulder strap 왘 3-digit lock and 2 clamp-locks for fixation of the cover 왘 strong, ergonomic handle 왘 metal hinges 왘 lid holder with hinge-joint mechanism 왘 document compartment in the cover
mm 420 (360)
g 5,090
왘 1 tool board in the lid with 13 push-in compartments on the bottom side and 12 push-in compartments as well as a clamp compartment (width 400 mm) on the lid side 왘 base tray, height 88 mm, can be subdivided by flexible inserts; cover plate with 15 push-in compartments and a clamp compartment (width 400 mm), can be fixed by 2 push-buttons 왘 cover and tool plate made of Con-Pearl® material 왘 30 kg maximum load 왘 external dimensions (W x H x D): 490 x 205 x 420 mm internal dimensions (W x H x D): 470 x 180 x 360 mm
00 21 00 21 Tool Case "BIG Twin"
00 21 40 LE
Model 00 21 40 T: 왘 telescopic handle for rolling transport 왘 applicable for cases: 00 21 40 LE Tool Case "BIG Twin", 98 99 14 Universal Tool Case 왘 height adjustable handle with catch 왘 integrated mechanism for fixation to the case, for rapid assembly and removal 왘 with 2 smooth running rolls 왘 dimensions: 60 x 245 x 400 (1,000) mm (extended)
Model 00 21 40 LE: 왘 heavy duty ABS material, black 왘 sturdy aluminium frame with D-shape rings for belt and fix, sturdy centre board with multipurpose push-in facilities by elastic loops and 12 small pockets 왘 comfortable handle and mounting device for a "Trolley" embedded in the bottom (available ordering ref. 00 21 40 T) 왘 metal hinges 왘 30 kg maximum load 왘 can be opened on one or both sides; bottom tray and cover can be opened independently 왘 stands securely in any opening position due to lid-holders and hinge mechanisms on both sides, that register in a position of 45° and 90° 왘 3-digit lock and 2 clamp-locks for fixation of the cover 왘 removable document compartment and removable tool board, with 13 push-in compartments on one side 왘 2 tilting locks to fix the bottom 왘 base tray, height 58 mm, can be subdivided by flexible inserts; cover plate with 6 large push-in compartments, can be fixed by push-button 왘 ext. dimensions ( W x H x D): 490 x 255 x 410 mm int. dimensions (W x H x D) : 445 x (105 + 105) x 350 mm
Upper closure, lockable: opening one side of the case
Lateral closure, lockable: opening the other side of the case
Lid holder with opening positions of 45° or 90°; operation by tilting lever
00 21 40 T Article-No. 0 EAN0 Code 4003773-
00 21 40 LE 057673 00 21 40 T 062981
0 Dimension 0 external (internal) mm 255 (105 +105) 60 x 245 x 400 (1000) mm (extended)
g 7,950 1,070 "BIG Twin" assembled with Trolley
163
Article-No.
Page
00 11 02 00 11 03 00 11 04 00 11 07 00 11 08 00 19 14 00 19 17 00 19 19 00 19 20 00 19 20 T 00 19 21 T 00 19 24 00 19 25 00 19 28 00 19 29 00 19 30 00 19 30 2 00 19 30 21 00 19 30 3 00 19 30 6 00 19 30 66 00 19 30 7 00 19 30 VIT 00 19 30 VIT1 00 19 30 VIT2 00 19 31 00 19 32 00 19 33 00 19 33 2 00 19 34 00 19 34 1 00 19 34 2 00 19 34 3 00 19 34 4 00 19 35 1 00 19 35 2 00 19 35 3 00 19 36 00 19 39 00 19 41 00 19 48 00 19 56 00 19 57 00 20 03 SB 00 20 04 SB 00 20 10 00 20 11 00 20 12 00 20 13 00 20 15 00 20 16 00 20 16 P 00 20 16 P ESD 00 20 17 00 20 18 00 20 18 ESD 00 21 01 TL 00 21 02 LE 00 21 02 SL 00 21 05 LE 00 21 15 00 21 15 LE 00 21 20 00 21 20 LE 00 21 30 00 21 32 LE 00 21 33 LE 00 21 40 LE 00 21 40 T 01 06 160 01 06 190 02 01 180 02 01 200 02 01 225 02 02 180 02 02 200 02 02 225 02 05 180 02 05 200 02 05 225
164
145 145 145 145 146 146 146 146 147 147 147 148 148 147 147 150 150 150 150 150 150 150 151 151 151 152 153 152 152 153 153 153 149 149 152 152 152 152 152 154 154 155 155 155 156 156 156 156 156 158 157 157 157 157 157 157 158 159 159 162 159 158 160 160 161 162 162 163 163 12 12 13 13 13 13 13 13 13 13 13
Article-No. 02 06 180 02 06 200 02 06 225 02 07 200 02 07 225 03 00 180 03 00 200 03 00 250 03 01 140 03 01 160 03 01 180 03 01 200 03 01 250 03 02 160 03 02 180 03 02 200 03 05 140 03 05 160 03 05 180 03 05 200 03 06 160 03 06 180 03 06 200 03 07 160 03 07 180 03 07 200 03 07 250 08 05 110 09 01 240 09 02 240 11 01 160 11 02 160 11 05 160 11 06 160 11 07 160 11 12 160 11 15 160 11 17 160 11 92 140 12 11 180 12 12 02 12 12 06 12 12 10 12 12 11 12 19 02 12 19 06 12 19 10 12 19 11 12 19 180 12 21 180 12 29 180 12 40 200 12 42 195 12 49 01 12 49 02 12 49 03 12 49 21 12 49 23 12 50 200 12 59 01 12 59 02 12 60 135 12 62 180 12 69 135 12 69 21 12 80 100 SB 12 82 130 SB 12 85 100 SB 13 01 160 13 01 614 13 02 160 13 72 160 SB 14 22 160 14 26 160 15 11 120 15 19 005 15 19 006 15 19 008 15 19 010 15 51 160
Page 13 13 13 13 13 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 12 15 15 17 17 17 17 17 17 17 17 18 18 19 19 19 19 19 19 19 19 18 18 18 20 21 20 20 20 21 21 20 20 20 20 21 20 21 22 22 22 23 23 23 23 24 24 24 24 24 24 24 24
Article-No. 15 61 160 15 81 160 16 20 16 SB 16 20 165 SB 16 20 28 SB 16 29 165 16 30 135 SB 16 39 135 16 40 150 16 49 150 16 60 05 SB 16 60 100 SB 16 65 125 SB 16 80 125 SB 16 85 125 SB 19 01 130 19 03 130 20 01 125 20 01 140 20 01 160 20 01 180 20 01 200 20 02 140 20 02 160 20 05 140 20 05 160 20 06 160 22 01 125 22 01 140 22 01 160 22 01 180 22 02 140 22 02 160 22 05 140 22 05 160 22 06 160 22 07 160 23 01 140 25 01 125 25 01 140 25 01 160 25 02 140 25 02 160 25 03 125 25 03 160 25 05 140 25 05 160 25 06 160 25 21 160 25 25 160 25 26 160 26 11 200 26 12 200 26 13 200 26 15 200 26 16 200 26 17 200 26 21 200 26 22 200 26 23 200 26 25 200 26 26 200 26 27 200 27 01 160 28 01 200 28 03 200 28 21 200 29 11 160 29 21 160 29 25 160 30 11 140 30 11 160 30 11 190 30 13 140 30 13 160 30 15 140 30 15 160 30 15 190 30 16 160 30 21 140
Page 24 24 25 25 25 25 25 25 26 26 26 27 27 27 27 29 29 29 29 29 29 29 29 29 29 29 29 30 30 30 30 30 30 30 30 30 30 30 31 31 31 31 31 31 31 31 31 31 31 31 31 32 32 32 32 32 32 32 32 32 32 32 32 33 33 33 33 34 34 34 35 35 35 35 35 35 35 35 35 35
Article-No. 30 21 160 30 21 190 30 23 140 30 25 140 30 25 160 30 25 190 30 31 140 30 31 160 30 33 160 30 35 140 30 35 160 30 36 160 31 11 160 31 15 160 31 21 160 31 25 160 32 11 135 32 21 135 32 23 135 32 31 135 33 01 160 33 03 160 34 12 130 34 12 130 ESD 34 22 130 34 22 130 ESD 34 32 130 34 32 130 ESD 35 11 115 35 12 115 35 12 115 ESD 35 21 115 35 22 115 35 22 115 ESD 35 31 115 35 32 115 35 32 115 ESD 35 42 115 35 42 115 ESD 35 52 145 35 62 145 35 72 145 35 82 145 36 12 130 36 22 125 36 32 125 36 42 125 SB 37 11 125 37 13 125 37 21 125 37 23 125 37 31 125 37 33 125 37 41 125 37 43 125 38 11 200 38 15 200 38 21 200 38 25 200 38 31 200 38 35 200 38 41 190 38 45 190 38 71 200 38 91 200 38 95 200 40 04 180 40 04 250 41 04 180 41 04 250 41 04 300 41 14 250 41 24 225 41 34 165 42 14 280 42 24 280 42 34 280 44 10 J5 44 10 J6 44 11 J0
Page 35 35 35 35 35 35 35 35 35 35 35 35 34 34 34 34 36 36 36 36 36 36 37 37 37 37 37 37 38 38 39 38 38 39 38 38 39 38 39 38 38 38 38 41 41 41 41 42 42 42 42 42 42 42 42 43 43 43 43 43 43 43 43 43 43 43 44 44 44 44 44 44 44 44 45 45 45 48 48 48
Article-No. 44 11 J1 44 11 J2 44 11 J3 44 11 J4 44 13 J0 44 13 J1 44 13 J2 44 13 J3 44 13 J4 44 19 J5 44 19 J6 44 20 J51 44 20 J61 44 21 J01 44 21 J11 44 21 J21 44 21 J31 44 21 J41 44 23 J11 44 23 J21 44 23 J31 44 29 J51 44 29 J61 45 10 170 45 21 200 46 10 A5 46 10 A6 46 11 A0 46 11 A1 46 11 A2 46 11 A3 46 11 A4 46 11 G0 46 11 G1 46 11 G2 46 11 G3 46 11 G4 46 13 A0 46 13 A1 46 13 A2 46 13 A3 46 19 A5 46 19 A6 46 20 A51 46 20 A61 46 21 A01 46 21 A11 46 21 A21 46 21 A31 46 21 A41 46 23 A01 46 23 A11 46 23 A21 46 23 A31 46 29 A51 46 29 A61 48 11 J0 48 11 J1 48 11 J2 48 11 J3 48 11 J4 48 21 J01 48 21 J11 48 21 J21 48 21 J31 48 21 J41 49 11 A0 49 11 A1 49 11 A2 49 11 A3 49 11 A4 49 21 A01 49 21 A11 49 21 A21 49 21 A31 49 21 A41 49 31 A0 49 41 A01 50 00 130 50 00 160
Page 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 47 47 49 49 49 49 49 49 49 47 47 47 47 47 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 50 50 50 50 50 50 50 50 50 50 51 51 51 51 51 51 51 51 51 51 51 51 52 52
Article-No. 50 00 180 50 00 210 50 00 225 50 00 250 50 00 300 50 01 130 50 01 160 50 01 180 50 01 210 50 01 225 50 01 250 50 01 300 51 01 210 55 00 300 56 00 325 57 00 360 58 10 225 58 30 225 61 01 200 62 12 120 64 01 115 64 02 115 64 11 115 64 12 115 64 12 115 ESD 64 22 115 64 32 120 64 32 120 ESD 64 42 115 64 52 115 64 62 120 64 62 120 ESD 64 72 120 67 01 140 67 01 160 67 01 200 67 05 140 67 05 160 67 05 200 68 01 160 68 01 180 68 01 200 69 01 130 69 03 130 70 01 110 70 01 125 70 01 140 70 01 160 70 01 180 70 02 125 70 02 140 70 02 160 70 02 180 70 04 140 70 05 125 70 05 140 70 05 160 70 05 180 70 06 125 70 06 140 70 06 160 70 06 180 70 07 160 70 07 180 70 11 110 70 15 110 70 26 160 71 01 200 71 02 200 71 11 200 71 31 200 72 01 140 72 01 160 72 01 180 72 02 125 72 11 160 72 21 160 72 51 160 74 01 140 74 01 160
Page 52 52 52 52 52 52 52 52 52 52 52 52 52 53 53 53 53 53 57 57 58 58 58 58 59 58 58 59 58 58 58 59 58 59 59 59 59 59 59 60 60 60 60 60 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 62 62 62 62 63 63 63 63 63 63 62 64 64
Article-No. 74 01 180 74 01 200 74 01 250 74 02 140 74 02 160 74 02 180 74 02 200 74 02 250 74 05 140 74 05 160 74 05 180 74 05 200 74 05 250 74 06 160 74 06 180 74 06 200 74 06 250 74 07 200 74 07 250 74 12 160 74 12 180 74 21 160 74 21 200 74 22 200 74 91 250 75 02 125 75 12 125 75 22 125 75 32 125 75 52 125 76 01 125 76 03 125 76 05 125 76 12 125 76 22 125 76 81 125 77 01 115 77 01 130 77 02 115 77 02 115 ESD 77 02 130 77 11 115 77 12 115 77 12 115 ESD 77 21 115 77 21 130 77 22 115 77 22 115 ESD 77 22 130 77 32 115 77 32 115 ESD 77 42 115 77 42 115 ESD 77 42 130 77 52 115 77 52 115 ESD 77 72 115 77 72 115 ESD 78 03 125 78 03 125 ESD 78 13 125 78 13 125 ESD 78 23 125 78 31 125 78 41 125 78 61 125 78 61 125 ESD 78 71 125 78 71 125 ESD 78 81 125 78 91 125 79 02 120 79 02 120 ESD 79 02 125 79 02 125 ESD 79 22 120 79 22 120 ESD 79 22 125 79 22 125 ESD 79 32 125
Page 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 63 65 65 65 65 65 65 65 65 65 65 65 66 66 66 67 66 66 66 67 66 66 66 67 66 66 67 66 67 66 66 67 66 67 68 69 68 69 68 68 68 68 69 68 69 68 68 70 71 70 71 70 71 70 71 70
Article-No.
Page
79 32 125 ESD 71 79 42 125 70 79 42 125 ESD 71 79 52 125 70 79 52 125 ESD 71 79 62 125 70 79 62 125 ESD 71 81 03 230 73 81 13 230 73 81 19 230 73 82 51 200 73 83 10 010 74 83 10 015 74 83 10 020 74 83 10 030 74 83 10 040 74 83 20 010 74 83 20 015 74 83 20 020 74 83 30 005 74 83 30 010 74 83 30 015 74 83 30 020 74 83 30 030 74 84 11 200 73 84 21 200 73 85 01 250 75 86 03 180 77 86 03 250 77 86 03 300 77 86 05 180 77 86 05 250 77 86 07 250 126 87 01 150 78 87 01 180 78 87 01 250 78 87 01 300 78 87 01 400 76 87 01 560 76 87 02 180 78 87 02 250 78 87 02 300 78 87 03 180 78 87 03 250 78 87 03 300 78 87 05 250 78 87 05 300 78 87 11 180 79 87 11 250 79 87 19 180 79 87 19 250 79 87 41 250 79 87 51 250 80 88 00 250 81 88 01 180 81 88 01 250 81 88 01 300 81 88 02 180 81 88 02 250 81 88 02 300 81 88 03 180 81 88 03 250 81 88 03 300 81 88 05 180 81 88 05 250 81 88 05 300 81 88 06 250 81 88 07 250 81 88 07 300 81 89 01 200 82 89 01 250 82 89 03 200 82 89 03 250 82 89 04 250 82 89 05 200 82 89 05 250 82 90 01 125 82 90 03 125 82 90 25 20 83 90 25 40 83
Article-No. 90 29 01 90 29 02 90 29 15 90 29 40 90 41 340 90 42 250 90 49 340 90 49 340 M 90 55 280 90 59 280 90 61 16 90 61 20 90 70 220 91 00 200 91 11 190 91 30 180 91 51 160 91 61 160 91 71 160 92 02 53 92 02 54 92 02 55 92 08 78 ESD 92 08 79 ESD 92 12 52 92 22 04 92 22 06 92 22 07 92 22 12 92 22 13 92 22 35 92 23 05 92 24 01 92 24 34 92 27 61 92 27 62 92 28 69 ESD 92 28 70 ESD 92 28 71 ESD 92 28 72 ESD 92 32 29 92 34 28 92 34 36 92 34 37 92 37 64 92 38 75 ESD 92 44 42 92 52 23 92 58 74 ESD 92 64 43 92 64 44 92 67 63 92 69 84 92 70 46 92 72 45 92 78 77 ESD 92 84 18 92 88 73 ESD 92 94 91 92 95 89 92 95 90 94 10 185 94 15 215 94 19 185 94 19 215 94 35 215 95 02 10 95 02 21 95 03 160 SB 95 05 140 95 05 165 95 05 185 95 05 190 95 06 230 95 11 165 95 11 200 95 11 500 95 12 165 95 12 200 95 16 165
Page
Article-No.
Page
83 83 83 83 84 84 84 84 84 84 85 85 85 86 86 86 87 87 87 89 89 89 90 90 89 88 88 88 88 88 88 88 88 88 90 90 90 90 90 90 88 88 88 88 90 90 89 89 90 89 89 90 91 89 89 90 89 90 91 91 91 93 93 93 93 94 94 94 95 95 96 95 95 96 96 97 98 96 97 96
95 16 200 95 17 200 95 17 500 95 21 600 95 27 600 95 29 600 95 31 250 95 31 280 95 31 720 95 31 870 95 36 250 95 36 280 95 39 250 95 39 280 95 39 720 95 39 870 95 61 150 95 61 190 95 71 445 95 71 600 95 77 600 95 79 445 95 79 600 95 81 600 95 89 600 97 00 215 A 97 00 215 B 97 00 215 D 97 21 215 97 21 215 B 97 21 215 C 97 32 225 97 40 10 97 43 05 97 43 06 97 43 200 97 49 04 97 49 05 97 49 06 97 49 08 97 49 09 97 49 13 97 49 15 97 49 16 97 49 18 97 49 19 97 49 20 97 49 23 97 49 24 97 49 30 97 49 35 97 49 40 97 49 44 97 49 50 97 49 54 97 49 60 97 49 62 97 49 64 97 49 70 97 49 74 97 49 76 97 49 81 97 49 82 97 49 83 97 49 84 97 49 87 97 49 90 97 49 91 97 49 93 97 49 94 97 49 95 97 50 01 97 51 04 97 51 10 97 51 12 97 52 03 97 52 04 97 52 05 97 52 06 97 52 08
97 97 98 98 98 98 99 99 100 100 99 99 99 99 100 100 101 100 101 101 101 101 101 101 101 102 102 102 102 102 102 103 103 104 104 104 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 106 106 107 107 109 109 109 109 109
Article-No. 97 52 09 97 52 10 97 52 13 97 52 14 97 52 19 97 52 20 97 52 23 97 52 30 97 52 33 97 52 34 97 52 35 97 52 36 97 52 37 97 52 38 97 52 50 97 52 63 97 52 63 DG 97 52 64 97 52 65 97 52 65 DG 97 53 04 97 53 08 97 53 09 97 53 14 97 54 24 97 59 06 97 59 14 97 61 145 A 97 61 145 F 97 62 145 A 97 71 180 97 72 180 97 81 180 97 90 00 97 90 01 97 90 05 97 90 06 97 90 07 97 90 08 97 90 09 97 90 10 97 90 12 97 90 21 97 90 22 97 90 23 97 90 24 97 99 01 97 99 02 97 99 03 97 99 04 97 99 05 97 99 06 97 99 07 97 99 08 97 99 09 97 99 10 97 99 11 97 99 12 97 99 13 97 99 14 97 99 15 97 99 16 97 99 17 97 99 18 97 99 19 97 99 20 97 99 21 97 99 22 97 99 23 97 99 24 97 99 25 97 99 26 97 99 27 97 99 28 97 99 29 97 99 30 97 99 31 97 99 32 97 99 33 97 99 34
Page
Article-No.
Page
Article-No.
Page
109 109 109 110 109 110 109 110 110 110 110 110 110 110 110 108 108 108 108 108 111 112 112 111 113 107 110 113 113 113 113 113 114 114 114 115 115 115 115 115 115 115 116 116 115 115 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117
97 99 35 97 99 36 97 99 37 97 99 38 97 99 40 97 99 41 97 99 42 97 99 43 97 99 44 97 99 45 97 99 46 97 99 47 97 99 48 97 99 49 97 99 70 97 99 71 97 99 72 97 99 73 97 99 74 97 99 75 97 99 76 97 99 77 97 99 78 97 99 79 97 99 92 97 99 93 97 99 95 97 99 96 98 00 07 98 00 08 98 00 09 98 00 1/2“ 98 00 1/4“ 98 00 10 98 00 11 98 00 12 98 00 13 98 00 14 98 00 15 98 00 16 98 00 17 98 00 18 98 00 19 98 00 22 98 00 24 98 00 27 98 00 3/4“ 98 00 3/8“ 98 00 5/16“ 98 00 5/8“ 98 00 7/16“ 98 00 9/16“ 98 01 07 98 01 08 98 01 09 98 01 10 98 01 11 98 01 12 98 01 13 98 01 14 98 01 15 98 01 16 98 01 17 98 01 18 98 01 19 98 01 22 98 01 24
117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132
98 03 055 98 03 06 98 03 07 98 03 08 98 03 09 98 03 10 98 03 11 98 03 12 98 03 13 98 04 10 98 04 13 98 04 17 98 04 19 98 04 22 98 05 13 98 05 17 98 05 19 98 13 25 98 13 30 98 13 40 98 13 50 98 13 60 98 14 05 98 14 06 98 14 08 98 15 05 98 15 06 98 15 08 98 20 10 98 20 25 98 20 30 98 20 35 98 20 40 98 20 55 98 20 65 98 20 80 98 21 45 98 24 00 98 24 01 98 24 02 98 24 03 98 24 04 98 25 00 98 25 01 98 25 02 98 25 03 98 25 04 98 31 98 35 125 98 35 250 98 37 1/2" 98 37 10 98 37 11 98 37 12 98 37 13 98 37 14 98 37 17 98 37 19 98 37 3/4" 98 37 3/8" 98 37 5/16" 98 37 5/8" 98 37 7/16" 98 37 9/16" 98 39 05 98 39 06 98 40
133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 135 135 135 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 135
Article-No.
Page
98 41 98 42 98 43 98 45 125 98 45 250 98 47 1" 98 47 1/2" 98 47 10 98 47 11 98 47 11/16" 98 47 12 98 47 13 98 47 14 98 47 16 98 47 17 98 47 18 98 47 19 98 47 22 98 47 24 98 47 27 98 47 3/4" 98 47 5/8" 98 47 7/8" 98 47 9/16" 98 49 05 98 49 06 98 49 08 98 52 98 53 03 98 53 13 98 54 98 55 98 56 98 56 09 98 60 04 98 62 200 98 64 02 98 65 01 98 65 02 98 65 03 98 65 10 98 65 20 98 65 30 98 65 40 98 65 41 98 67 05 98 67 10 98 90 98 99 11 98 99 12 98 99 13 98 99 14 99 00 200 99 00 220 99 00 220 K12 99 00 250 99 00 280 99 00 300 99 01 200 99 01 220 99 01 250 99 01 280 99 01 300 99 10 300 99 11 300 99 14 300
Unauthorized use or copying the contents of the catalogue is not permitted. All rights are reserved for alteration of models and technical alterations. Illustrations, dimensions and weights are only approximate. All rights are reserved for mistakes and misprint. Printed in the Federal Republic of Germany KNIPEX-Werk 2007
135 137 137 135 135 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 137 138 138 138 138 139 139 139 139 140 140 140 140 140 140 140 140 140 141 141 141 141 142 142 143 55 55 55 55 55 55 55 55 55 55 55 55 55 55