Pipe/Tube Cutting & Preparation • Wide selection from a single source. • Durable designs. • Exclusive features for maximum productivity. Type Pipe Cutters Heavy-Duty 4-Wheel Wide Roll Hinged Soil Pipe Torque Wrench Replacement Cutter Wheels
No. of Models 7 2 1 11 5 2 21
Pipe Reamers / Extractor / Taps Reamers Extractors Extractor Sets Pipe Taps
4 9 4 11
Power Pipe Cutting
Pipe Capacity 1⁄8"
– 6" – 4" 1⁄8" – 2" 2" – 12" 11⁄2" – 8" – – 3⁄4"
1⁄4"
Page 3.2 3.3 3.3 3.3 3.4-3.5 3.5 3.6
– 4" – 2" 1⁄8" – 1" 1⁄8" – 2"
3.7 3.7 3.7 3.7
2
21⁄2" – 12"
3.8 – 3.9
Dry Cut Saws
3
12" – 14"
3.10 – 3.11
Copper Cutting & Prep
2
1⁄2
Tubing Cutters
20
1⁄8"
Plastic Pipe Cutters
4
1⁄8
Replacement Cutting Wheels
19
Copper Cleaning Brush/ Machines
2
1⁄4"
Conduit Sizing Tool
1
1⁄2
Reamers, Deburring Tools
7
1⁄4"
1⁄8"
" – 4" –
65⁄8"
"– 23⁄8"
3.12 3.13 – 3.16 3.16
–
3.17
– 6"
3.18
"– 3⁄4"
3.18
– 4"
3.19
3.1 03_Pipe tools.indd 2
4/24/06 9:37:01 AM
Pipe Cutters Pipe Cutter Selection Pipe Cutter Heavy-Duty 4-Wheel
Page No. 3.2 - 3.3 3.3
Wide-Roller
3.3
Hinged
3.3
Soil Pipe
Material / Diameter Steel / Stainless Heavy Wall Steel
Cast Iron
" - 6" 3⁄4" - 4" 1⁄8" - 2" 2" - 12" 1⁄8
3.4 - 3.5
1 1/2" - 8"
Heavy-Duty Pipe Cutters • Fast, clean pipe cutting by hand or power. • Extra-long shank protects adjustment threads, while an extra-large handle is provided for quick, easy adjustment. • Can be converted to 3-wheel cutter by replacing rollers with cutter wheel, or the 2A and 4S can be ordered as 3-wheel model for use in areas where a complete turn is not possible.
Catalog No.
Model No.
32810 32820 32825 32830 32840 32845 32850
1-A 2-A 2-A 3-S 4-S 4-S 6-S
Pipe Cutter Description
Nos. 1-A & 2-A Heavy-Duty Heavy-Duty 2-A 3-Wheel Heavy-Duty Heavy-Duty Heavy-Duty 4-S 3-Wheel Heavy-Duty Heavy-Duty
Pipe Capacity Nominal Size in. mm 1⁄8-11⁄4 1⁄8-2 1⁄8-2
1-3 2-4 2-4 4-6
3-32 3-50 3-50 25-75 50-100 50-100 100-150
Weight lb.
kg
61⁄2 7 7 15 18 18 22
3.0 3.2 3.2 6.9 8.2 8.2 10.0
Nos. 3-S, 4-S & 6-S
3.2 03_Pipe tools.indd 3
4/24/06 9:37:08 AM
4-Wheel Pipe Cutters • Designed for work in areas where a complete turn is impossible. • No. 42-A has a short handle for use in areas where only a 130° turn can be made.
No. 42-A
• Second handle on No. 44-S makes two-man leverage possible on large pipe sizes. • Both equipped with four heavy-duty wheels.
Catalog No. 32870 32880
Pipe Cutter Description
Model No. 42-A 44-S
Heavy-Duty 4-Wheel Heavy-Duty 4-Wheel
Pipe Capacity Nominal Size in. 3⁄4-2
21⁄2-4
Weight
mm
lb.
kg
20-50 60-100
63⁄4
3.1 9.1
20
No. 44-S
Wide-Roll Pipe Cutter • Featuring extra-wide rolls, this cutter is especially designed for use with power drives. • The wide rolls provide for true tracking and cleaner cuts. No. 202 Catalog No.
Model No.
32895
202
Pipe Cutter Description Heavy-Duty Wide Rolls
Pipe Capacity Nominal Size in. 1⁄8-2
Weight
mm
lb.
kg
3-50
8
3.5
Hinged Pipe Cutters • Designed for rapid cutting of 2" through 12" steel pipe, heavy-wall steel pipe and cast-iron pipe. • The 11 models operate with minimal cutter rotation as necessary for tight quarters.
Catalog No. 73162 74227 83080 83085 74685 83145 83150 74700 83165 83170 74710
Model No. 424-S* 424-CI 466-S* 466-HWS* Steel Pipe 466-CI 468-S* 468-HWS* Steel Pipe 468-CI 472-S* 472-HWS* Steel Pipe 472-CI
Hinged Pipe Cutter Description
Pipe Capacity Nominal Size in.
Weight
mm
lb.
kg
For Steel Pipe For Cast/Ductile Iron For Steel Pipe For Heavy-Wall
2-4 2-4 4-6 4-6
50-100 50-100 100-150 100-150
131⁄2 131⁄2 281⁄2 281⁄2
6.0 6.0 13.0 13.0
For Cast-Iron Pipe For Steel Pipe For Heavy-Wall
4-6 6-8 6-8
100-150 150-200 150-200
281⁄2 33 331⁄2
13.0 15.0 15.2
For Cast-Iron Pipe For Steel Pipe For Heavy-Wall
6-8 8-12 8-12
150-200 200-300 200-300
331⁄2 411⁄2 42
15.2 19.0 19.1
For Cast-Iron Pipe
8-12
200-300
42
19.1
* Furnished with X-tra sharp wheel for up to 40% faster cutting.
Three- and four-wheel pipe cutters should only be used when the cutter cannot be rotated completely around the pipe.
03_Pipe tools.indd 4
3.3 4/24/06 9:37:10 AM
Soil Pipe Cutters
No. 226 In-Place Soil Pipe Cutter • The RIDGID 226 In-Place Soil Pipe Cutter is a compact, lightweight tool designed to cut hub and no-hub soil pipe in tight quarters. • Only 17" long, the Model 226 is perfect for cutting cast iron, concrete and clay pipe where space is limited. • The Model 226 is especially suited for against-the-wall and other tight quarter applications. • From the Model 226’s compact design to its unique chain latching mechanism, every feature has been engineered for maximum productivity.
No. 206 Soil Pipe Cutter • Cuts 1½"-6" No Hub® soil pipe. • Lighter weight and closer spacing of cutter wheels, together with simple ratcheting action, give smooth cut on lighter wall pipe. • Ratchet-action handle parallel to pipe allows for application in trenches of minimum width. • Complete with hand guard to protect operator’s knuckles when cutting.
No. 246 Soil Pipe Cutter • Cuts 1½"-6" clay, cast-iron or cement pipe and 4" class 22 water main. • Ratchet-action handle parallel to pipe allows for application in minimum width trenches. • Complete with hand guard to protect operator’s knuckles when cutting.
No. 228 Soil Pipe Assembly Tool • Handles all 1½" through 8" gasketed soil pipe without extra, loose attachments. • Easy assembly of Y, tee and elbow fittings, as well as straight lengths from any angle. • Slim, compact design lets one man assemble even large sizes quickly and easily. • Removal of handle facilitates vertical and overhead pipe assembly.
See page 3.6 for pipe cutter replacement cutter wheels.
3.4 03_Pipe tools.indd 5
4/24/06 9:37:20 AM
No. 276 Soil Pipe Cutter • Provides one stroke cutting of 11/2"-6" service weight, No Hub soil pipe, clay and cement pipe. Makes repeated cuts quickly. • Expand capacity up to 8" service weight soil pipe by ordering Catalog No. 33665 Chain Extension Assembly. Catalog No.
Model No.
68650
206
Description
Soil Pipe Cutter No Hub 226 In-Place Soil Pipe Cutter 246 Soil Pipe Cutter 276 Soil Pipe Cutter 228 Soil Pipe Assembly Tool 206/226/276 Chain Extension Assy. 246 Chain Extension Assy.
69982 32900 74207 32905 33665 34570
Capacity
Weight
in. 11⁄2-6
mm 50-150
lb. 18
kg 8.2
11⁄2-6 11⁄2-6 11⁄2-6 11⁄2-8 – –
50-150 50-150 50-150 50-200 – –
18 25 23 223⁄4 1 1
8.2 11.3 51 10.3 3.5 3.5
Std. Pack
Replmt. Chain Cat #
1
33670
1 1 1 1 1 1
33670 34575 33670 – – –
Tool Capacity Pipe Size in Inches Standard Maximum Capacity w/ Capacity wo/ Chain Extension Chain Extension
Type of Pipe
11⁄2"–6" 11⁄2"–6" 11⁄2"–6" 4"–6" 2"–5"
Clay Pipe No Hub Cast Iron Service Weight Cast Iron Concrete Pipe Extra Heavy Soil Pipe
11⁄2"–8" 11⁄2"–8" 11⁄2"–8" 4"–6" 2"–5"
No. 902 Torque Wrench • Preset to eliminate guesswork in No Hub soil pipe installations. • Assures proper coupling tightness for strong, leak-free joints. • The 5/16" drive tightens with a fast ratchet action until the wrench clicks for accurate 60 inch-pounds torque.
No. 904 Torque Wrench • The 3/8" drive tightens with a fast ratchet action until the wrench clicks for accurate 80 inch-pounds torque. Catalog No.
Model No.
31410
902
14988
904
Description Torque Wrench for No Hub Cast-Iron Soil Pipe Couplings Torque Wrench for No Hub Cast-Iron Soil Pipe Couplings
Weight
Torque in. lb.
NM
lb.
kg
Std. Pack
60
6.8
1⁄2
0.2
1
80
9.0
1⁄2
0.2
1
3.5 03_Pipe tools.indd 6
4/24/06 9:37:30 AM
Cutter Wheels
83165 472S
26212
74710 472C
58657
83150 468HWS
764
83145 468S
•
732
74700 468C
▲ ▲
83170
83085 466HWS
•
42390/34617
83080 466S
▲
820/364
74685 466C
Catalog Model Standard Blade No. No. Pack Exp. 33220 E-109 1 .360 • 44185 E-1032 6 .450 ▲ ▲ • 44190 E-1032S 6 .450 ▲ ▲ ▲ 33135 E-1962 1 .265 ▲ ▲ ▲ • ▲ 33225 E-2632 1 .244 • 83140 E-3186 1 .680 ▲ ▲ 75557 E-4266 4 .665 ▲ ▲ 75572 E-2267 4 .400 ▲ • 33105 F-3 12 .312 ▲ ▲ ▲ ▲ • 33110 F-3S 6 .312 ▲ ▲ ▲ ▲ ▲ 33115 F-119 1 .132 ▲ ▲ ▲ ▲ ▲ 33125 F-229 6 .411 ▲ ▲ ▲ • • 33130 F-229S 6 .411 ▲ ▲ ▲ ▲ ▲ 75567 F-366 4 .375 • ▲ 33145 F-367 1 .470 • • • 33150 F-367-S 1 .470 ▲ ▲ ▲ 33155 F-383 1 .265 ▲ ▲ ▲ 33100 F-514 12 .312 • • ▲ ▲ • 33120 F-515 6 .411 ▲ ▲ ▲ • • 75562 F-546 4 .433 ▲ ▲ 63297 AC-1586 1 .244 • Denotes Cutter Wheels furnished with original product. ▲ Denotes alternate Cutter Wheel.
472HWS
73162
74227 424CI
246/276
42370
32865
32900/74207
209
360
32860 208
424S
32895
68650
202
32850 6S
206
32840 4S
32870
32830 3S
32880
32820 2A
44S
32810 1A
42A
Catalog No. Model No.
Pipe Cutters (Original Product) Model
▲ ▲
• • • ▲
• ▲ ▲ • ▲ ▲ • ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ • ▲ ▲ • ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
•
▲
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
▲
Application/Material Cast Iron Steel Pipe & Ductile Iron S.S. Pipe Grey Cast Iron Cast Iron Steel & Ductile Iron HW Heavy Wall Steel Cast & Ductile Iron Steel & Ductile Iron S.S. Pipe Grey Cast Iron Steel & Ductile Iron S.S. Pipe Steel Pipe Steel & Ductile Iron S.S. Pipe Grey Cast Iron Steel & Ductile Iron Steel & Ductile Iron Steel Pipe Concrete Pipe
3.6 03_Pipe tools.indd 7
4/24/06 9:37:35 AM
Reamers, Extractors & Taps Pipe Reamers • No. 2-S Spiral Ratchet Reamer – Self-feeding spiral design for extra-fast and easy hand reaming. Model 2S Reamer is not suitable for power drive reaming. • Nos. 2 and 3 Ratchet Reamers – Long taper design will not dig in. Suitable for use with power drives. • No. 254 Spiral Ratchet Reamer – Hollow center reduces weight. Large pressure plate. Hardened alloy steel cone removable for sharpening. No. 2-S
No. 254
No. 283
Catalog No.
Model No.
34955 34945 34950 34960
2-S 2 3 254
Capacity Description
in.
mm
lb.
1⁄4 -
6-50 3-50 9-75 62-100
71⁄4 7 111⁄2 14
2 2 3⁄8 - 3 21⁄2 - 4
Spiral Reamer Straight Reamer Straight Reamer Spiral Reamer
Weight
1⁄8 -
kg 3.3 3.2 5.2 6.4
Std. Pack
Replacement Cone Cat. No.
1 1 1 1
35020 34975 35090 35135
Note: All reamers include handle.
Pipe Extractors • RIDGID pipe extractors make easy work of removing broken threaded ends of pipe, pipe plugs and fittings. • Each is plainly marked showing drill size used when solid ends of plugs and fittings must be drilled to receive extractor. Individual Pipe Extractors Catalog Model Catalog No. No.* No. 35595 35600 35605 35610 35615 35620 35625 35630 35635
80 81 82 83 84 85 86 87 89
– – – 35640 35645 35650 35655 35660 35665
Part No.*
Pipe Size in. mm
– – – 83E 84E 85E 86E 87E 89E
1⁄8
3 6 10 12 20 25 32 40 50
1⁄4 3⁄8 1⁄2 3⁄4
1 11⁄4 11⁄2 2
Length Overall in. mm 21⁄4 21⁄2 23⁄4 3 31⁄4 31⁄2 33⁄4 4 41⁄2
56 62 69 65 81 87 94 100 112
Use Drill in. mm 1⁄4 3⁄8 1⁄2 5⁄8
13⁄16 11⁄16 13⁄8 19⁄16 21⁄16
Weight oz. g
6 9 12 16 20 26 34 39 52
3/4 11/2 21/2 4 71/2 121/2 20 26 50
Std. Pack
21 43 61 113 213 354 567 737 1417
6 6 6 6 6 6 6 6 6
*Pipe Extractors for Schedule 80 pipe Pipe Extractor Sets Catalog No.
Model No.
35670 35675 35680 35685
880 881 882 883
Capacity/Pipe Size
Weight
in.
mm
Set Includes
- 1⁄2 - 3⁄4 1⁄4 - 1 1⁄8 - 1
3-12 6-20 6-25 3-25
Nos. 80 to 83 Inclusive Nos. 81 to 84 Inclusive Nos. 81 to 85 Inclusive Nos. 80 to 85 Inclusive
1⁄8 1⁄4
oz.
g
8 16 28 28
227 454 794 794
Std. Pack 1 1 1 1
Pipe Taps: Hand use only • Made from carbon steel in right hand configuration only. • These taps are especially suited for restricted area work. • All taps have taper of 3⁄4" per foot. Catalog No. 35815 35820 35825 35830 35835 35840 35845 35850 35855
Model No. E-5112 E-5113 E-5114 E-5115 E-5116 E-5117 E-5118 E-5119 E-5120
Description
Pipe Tap-NPT Pipe Tap-NPT Pipe Tap-NPT Pipe Tap-NPT Pipe Tap-NPT Pipe Tap-NPT Pipe Tap-NPT Pipe Tap-NPT Pipe Tap-NPT
Drill Size
Nominal Pipe Size in. mm
21⁄64
1⁄8
7⁄16
1⁄4
9⁄16
3⁄8
45⁄64
1⁄2
29⁄32
3⁄4
19⁄64 131⁄64 147⁄64 215⁄64
1 11⁄4 11⁄2 2
3 6 10 12 20 25 32 40 50
Threads Per Inch 27 18 18 14 14 111⁄2 111⁄2 111⁄2 111⁄2
Weight lb. 1⁄16 1⁄8 1⁄4 1⁄4 1⁄2
1 11⁄4 2 31⁄4
kg 0.03 0.06 0.1 0.1 0.2 0.5 0.6 0.9 1.5
Std. Pack 1 1 1 1 1 1 1 1 1
3.7 03_Pipe tools.indd 8
4/24/06 9:37:36 AM
Power Pipe Cutters
Power Pipe Cutter / Model 258 21⁄2" to 8" Diameter Pipe The RIDGID Model 258 Power Pipe Cutter cuts 21⁄2" to 8" schedule 10*/40 steel pipe, galvanized pipe, rigid conduit etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21' or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for Beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe. Some of the 258 advantages are: • Square cut 21' or nipple lengths of pipe without effort. • Easily cuts by displacing instead of removing pipe material. • No abrasive dust, dangerous sparks, or open flame. • Quickly cuts steel pipe with minimal burr. • Great for cutting pipe for groove joining. • Heavy-duty design is perfect for field or shop use. • Adaptable for beveling.
Model No. 258
Specifications • • • • •
Cutting Capacity: Model 258 21/2" to 8" schedule. 10*/40 steel pipe. Model 700 Power Drive. Power Drive RPM: 33 (no load). Weight: 105 lbs. (excludes No. 700 Power Drive, see page 4.15).
Standard Equipment • • • •
Model 700 ready for mounting on Model 258 Unit, see page 4.15
3.8 03_Pipe tools.indd 9
One (1) RIDGID 774 Square Drive Adapter. One (1) 81/2" HD Cutter Wheel Assembly. One (1) Hydraulic Ram and Foot Pump. Two (2) 21/2" to 12" Ball Transfer Pipe Supports. *Use the thin cutter wheel for best results. **Cutting time varies with pipe schedule and diameter. Note: Models 258 and 258XL are not recommended to cut cast iron pipe. For optimum wheel life always properly support the work piece with pipe supports. (See pages 2.2 to 2.5)
Model 258 with Pipe Roller in use for beveling. Two operators are recommended for this operation.
Model 258 Pipe Cutter with No. 700 Power Drive in use for cutting.
Do not overfill the hydraulic pump on power pipe cutters. Excess oil will purge out of seals on pump and ram – this is not a defect.
4/24/06 9:38:05 AM
Power Pipe Cutter / Model 258XL 8"-12" Diameter Pipe The RIDGID 258XL offers 8"-12" diameter pipe cutting capacity. Utilizing displacement type cutter wheel technology, the patented design enables larger diameter pipe to be cut to length. The 258XL also uses the RIDGID 700 Power Drive to rotate the heavy-duty cutter wheel. Now one person can easily square cut 12" schedule 40 pipe in minutes.
Specifications • Cutting Capacity: Model 258XL: 8"-12" schedule 10*/40 steel pipe. • Model 700 Power Drive RPM: 33 (no load). • Weight: 140 lbs. (excludes No. 700 Power Drive, see page 4.15).
Standard Equipment • One (1) RIDGID 774 Square Drive Adapter. • One (1) 81/2" H-D Cutter Wheel Assembly. • One (1) Hydraulic Ram and Foot Pump. • Two (2) 21/2" to 12" Ball Transfer Pipe Supports. *Use the thin cutting wheel for best results. Note: For optimum wheel life properly support the work piece with standard pipe supports. (See pages 2.2 to 2.5)
Model No. 258XL
Ordering Information Catalog Model Description No. No. 50767 258 21⁄2"-8" Pipe Cutter 58227 258-XL 8"-12" Pipe Cutter Note: 700 Power Drive not included. For information on 700 Power Drive see page 4.15.
Pipe Support
Pipe Roller For Beveling (Model 258 Only)
Accessories 66687
–
50812 58222 54397 60002 60007 61757
E-258 E258-T – 258PS – –
81⁄2" H-D Cutter Wheel Assembly (includes HD Cutter Wheel, hub w/pins, cover plate) 8½" H-D Cutter Wheel only 8½" Thin Wall Cutter Wheel Only (PVC and Steel) Transport Cart Pipe Support 21⁄2"-12" Replacement Ball Transfer Head Set Pipe Roller for Beveling (for Model 258 only)
13
5.9
2 2 24 7 51⁄2 13
1 1 11 3.1 2.5 6
Transport Cart
When using 258 and 258XL pipe cutters with long lengths of pipe, it is especially important to properly support the pipe to prevent cutter wheel damage. Extra pipe supports may be needed and the work area must be level.
03_Pipe tools.indd 10
Weight lb. kg. 105 48 140 63
3.9 4/24/06 9:38:24 AM
Dry Cut Saw / Model 614
Saws
The Model 614 features carbide-tipped blades to cut different materials and geometric configurations without cutting fluid. Cutting with the Model 614 generates no burr, abrasive dust or heat, providing clean and fast cuts on steel, copper, plastic and wood. Either straight or miter, the Model 614 offers the largest cutting capacity in its class.
Specifications • • • • •
Powerful 15 amp 2HP motor. Miter cut up to 45˚. Blade dimensions 14" x 80T x 00087" x 1". Spindle lock. Dust collector.
• Built-in maintenance tools. • Exclusive quick-acting vise. • CSA approved. • Approved to UL standards (NRTLC).
Standard Equipment • One (1) dry cut saw with quick acting vise. • One (1) 14" – 80 tooth blade (installed). • Two (2) maintenance tools. Model 614 Dry Cut Saw
Ordering Information Catalog No. 71687 72862
Model No. 614 614
Description Dry-Cut Saw, 115V, 60Hz Dry-Cut Saw, 230V, 60Hz*
Weight lb. 47 47
kg 21 21
*Not for sale in the U.S. or Canada
Blades for RIDGID Models 614 and 590 Dry Cut Saws Ordering Information Catalog No. 71697 71692
Model No. – –
Description 12" Carbide-Tipped Blade 60 Tooth 14" Carbide-Tipped Blade 80 Tooth
Weight lb. 2 3
kg 0.90 1.30
Model 614 Capacity Cutting Angle 90° Cuts 45° Cuts
Workpiece Geometry
51⁄8" O.D. 130mm 41⁄8" O.D. 105mm
33⁄4" x 7" 95mm x 180mm 31⁄3" x 4" 80mm x 100mm
43⁄4” x 43⁄4” 120mm x 120mm 43⁄4” x 43⁄4” 90mm x 90mm
3.10 03_Pipe tools.indd 11
4/24/06 9:38:37 AM
Abrasive Saw / Model CM1450 From pipe to angle iron, rebar to metal studs, the Model CM1450 can handle the work. The CM1450 makes work easier and more productive with the comfortable D-grip handle and the ability to make 45° cuts from right or left angles.
Benefits • Heavy-duty cast iron base with non-slip rubber feet – Sturdy support during operation, less vibration. • D-Handle grip – Ergonomic handle maximizes user comfort. • Die Cast aluminum motor housing with externally accessible brushes – Helps dissipate heat; easy to replace worn brushes. • Tool-less fence adjustment – Quick and easy fence adjustment for angle cuts. • Arbor lock and arbor wrench included – Wrench is stored under the base for easy removal of abrasive disk.
Specifications • • • • Model CM1450 Abrasive Saw
Miter Capacity: 45° left / 45° right. RPM: 3900. Motor: 15 amp. Abrasive Disk: 14" Diameter : 1" Dia. arbor hole, 3⁄16" thick.
Ordering Information Catalog No. 10888 42956
Model No. CM1450 –
Weight lb. kg 55 24.9 135⁄8 6.2
Description 14" Abrasive Chop Saw, 115V, 60Hz Pack of 10 Abrasive Disks for Steel
Capacity: at 90° Cutting Angle 355mm (14”) Outer Diameter x Less Than 4.5mm (3⁄16”) Thickness x 25.4mm (1”) Hole Diameter
Applicable Wheel Dimensions Workpiece Configuration (Cross-Section) Maximum Cutting Capacity “a”
1⁄2"
(12.7mm)
a a 1⁄2"
(12.7mm)
a 2" (50.8mm) Square or Round
5"
a
a
5" (127mm) 1⁄2" wall (12.7mm) thickness
41⁄2"
1⁄2"
(114.3mm) 1⁄2" wall (12.7mm) thickness
(12.7mm) Solid
12.7mm
a a 5" (127mm)
3.11 03_Pipe tools.indd 12
4/24/06 9:38:42 AM
Copper Cutting Prep Machines
Model 122 Capacity • Copper Tube: 1⁄2" - 2" (12mm - 60mm). • Copper Fittings: 1⁄2" - 2" (12mm - 60mm).
Model 122XL Capacity • Copper Tube: 1⁄2" - 4" (12mm - 120mm). • Copper Fittings: 1⁄2" - 4" (12mm - 120mm).
These machines are designed to cut, clean, ream*, and debur 1⁄2 " to 4" copper tubing and fittings quickly and professionally. Weighing only 50 pounds and 80 pounds, respectively, and possessing a conveniently located carrying handle, the Models 122 and 122XL are ideal for transport directly to the job site. Rugged cast aluminum housing and powerful 1⁄3 HP induction motor assure long life.
Features • Powerful, 1⁄3 HP induction motor drives rollers at 450 RPM (122), 300 RPM (122XL). • Rugged O.D. Cleaning Brush cleans tubing quickly with minimal effort. • Core Reamer easily removes turbulence-causing burrs. • Cutting Handle adjusts to accommodate different tubing sizes. • Cutter Wheel tested to over 10,000 cuts. • Guide Rollers ensure a straight cut with no tracking. • Large Carrying Handle for easy transport to the job site. • Built-in 1⁄2"-Incremental Scale for quick, easy measuring. • Fitting Brush Kit includes six brushes, storage rack and collet. • CSA approved. • Approved to UL standards (NRTLC).
Model 122
Technical Specifications • Motor: 1⁄3 HP, 115V, 60Hz Induction Motor. • Switch: Toggle On/Off. • Cutter Wheel: Model 2191 HD Wheel (122). • Cutter Wheel: Model 122 SS (122XL).
• Roller Speed: 450 RPM (122), 300 RPM (122XL). • Reamer: Single Flute Cone, RH, 1⁄2" to 2" (122). • Reamer: Single Flute Cone, RH, 1⁄2" to 4" (122XL).
Standard Equipment Model 122XL
The heavy-duty O.D. Cleaning Brush cleans the outside diameter of 1⁄2" or 2" copper tubing quickly and easily.
The Inner Reamer removes turbulence-causing burrs quickly and effortlessly.
The optional fitting brush attachments can be used to clean fittings fast.
The optional Debur Disk is used to grind the O.D. edge to help with tight fittings.
Model 122
Model 122XL
• One (1) O.D. Cleaning Brush. • One (1) Core Reamer. • One (1) Fitting Brush Storage Kit. *Reams up to 2" in diameter
• One (1) O.D. Cleaning Brush. • One (1) O.D. Deburring Disk. • One (1) Core Reamer.
Ordering Information Catalog No.
Model No.
93492 10973
122 122XL
Accessories 93717 93722 93727 93732 93737 93742 12638 12643 94682 46105 93747 93712 93707
– – – – – – – – – – – – –
36662 33175 33551 10343 42360
301A 2191 122SS – 1206
Description
Weight lb. kg
115V Copper Cutting/Prep Machine 1⁄2"–2" 115V Copper Cutting/Prep Machine 1⁄2"–4"
50 83
22.68 37.65
1⁄2"
1⁄2
3⁄4"
1⁄2 3⁄4
0.24 0.26 0.27 0.29 0.77 0.79 0.79 0.82 0.44 0.57 0.95 2.63 1.39
Fitting Brush (3 Per Pack) Fitting Brush (3 Per Pack) 1" Fitting Brush (3 Per Pack) 1 1 ⁄4" Fitting Brush (3 Per Pack) 11⁄2" Fitting Brush (3 Per Pack) 2" Fitting Brush (3 Per Pack) 21⁄2" Fitting Brush (3 Per Pack)–122XL Only 3"-4" Fitting Brush (3 Per Pack)–122XL Only O.D. Cleaning Brush O.D. Debur Disk Quick-Change Collet Fitting Brush Holder Fitting Brush Storage Kit Includes Mountable Storage Rack, Quick-Change Collet, Spare Cutter Wheel, and Brushes (1⁄2", 3⁄4", 1", 11⁄4", 11⁄2", 2") Model 301A Foot Switch–120V Cutter Wheel for Copper Cutter Wheel for Copper and Stainless Steel Wheel Pin for 33551 Cutter Wheel 1206 Stand
3⁄4
13⁄4 13⁄4 13⁄4 2 1 11⁄4 21⁄4 6 3 71⁄2 1⁄4 1⁄4 1⁄4
31
3.39 0.01 0.01 0.01 14.06
3.12 03_Pipe tools.indd 13
4/24/06 9:38:46 AM
Tubing Cutters Tubing Cutter Selection Cutter Close Quarters
Page No. 3.13
Constant Swing
3.14
Tubing & Conduit
3.15
Quick Acting
3.15
Plastic Pipe
3.16
Copper Cutting Machines
3.12
Material / Diameter Copper
Steel / Stainless
Plastic / PVC
Aluminum
" - 1 1⁄8" 1⁄8" - 2 3⁄8" 1⁄8" - 3 1⁄8" 1⁄8" - 6 5⁄8"
1⁄8
" - 23⁄8"
1⁄8
" - 4"
1⁄2
Close Quarters Tubing Cutters • Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts. • Strong, lightweight slide and wheel housing, large knurled feed screw knob gives easy control of cutting pressure for clean cuts. • The Model 117 and 118 include a self-feeding cutter wheel that automatically cuts after tightening the knob only once. • The Model 117 features a special knob for easier tightening of the feedscrew. No. 117 Catalog No.
Model No.
Description
Std. Wheel
40617 32975 32985 97787 86127
101 103 104 117 118
Close Quarters Cutter* Close Quarters Cutter Close Quarters Cutter Close Quarters Quick-Feed Cutter Close Quarters Quick-Feed Cutter*
E-3469 E-3469 E-3469 E-3469 E-3469
Capacity
Weight
in.
mm
lb.
kg
Standard Pack
1⁄4-11⁄8
6-28 3-16 5-24 5-24 6-28
1⁄4
0.1 0.1 0.1 0.1 0.1
6 6 6 12 12
1⁄8-5⁄8 3⁄16-15⁄16 3⁄16-15⁄16 1⁄4-11⁄8
1⁄6 1⁄4 1⁄4 1⁄4
* Models 101 and 118 include spare cutter wheel in knob
No. 118
For best cutting results, change the cutter’s wheel pin at least once for every two cutter wheel replacements
03_Pipe tools.indd 14
3.13 4/24/06 9:38:59 AM
X-CEL™ Means Speed Many of our most popular tubing cutters now include several X-CEL features to make your job quicker and easier. • X-CEL Knob – cut tubing more quickly and easily with our larger, more ergonomic designs. KNOB – for Quicker Cutting
• X-CEL Wheel Pin – change your cutter wheel quickly using our new ball detent design…no tool needed…no lost clips!
PIN – for Quicker Wheel Change
• Spare cutter wheels included for maximum uptime.
SPARE WHEEL IN KNOB
Constant Swing Cutters with New X-CEL Features • Telescoping feed screw design keeps the cutter at the same length regardless of tubing diameter – good for tight spaces.
X-CEL™ Knob = quicker cut
• Features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-flare cuts, and a fold-away reamer. • Now includes X-CEL knob and X-CEL Pin for quicker cutting and wheel replacement. • Made from high-strength zinc alloy. • Spare cutter wheel included in the knob. Spare wheel included in knob.
X-CEL™ Pin = quicker wheel change
No. 150
• Cuts copper, brass, and aluminum tubing and thin-wall conduit. Catalog No.
Model No.
Description
Std. Wheel
31622 31627 66737 66742
150 150 150-L 150-LS
Feed Cutter Above w/H-D Wheel(s) Constant Swing Cutter Above w/H-D Wheel(s)
E-3469 E-4546 E-3469 E-4546
Capacity
Weight
in.
mm
lb.
kg
Standard Pack
1⁄8-11⁄8
3-28 3-28 3-35 3-35
7⁄8
0.4 0.4 0.4 0.4
6 6 6 6
1⁄8-11⁄8 1⁄4-13⁄8 1⁄4-13⁄8
7⁄8 7⁄8 7⁄8
Enclosed Feed Cutters • Cuts copper, brass and aluminum tubing and thin-wall conduit. • Both Enclosed Feed Cutters have a quick-acting mechanism for faster size adjustments. • Spare cutter wheel.
Catalog No. 33055 33070
Model No. 205 205
Description Ratcheting Encl. Feed Cutter Above w/H-D Wheel(s)
Std. Wheel E-3469 E-4546
Capacity
Weight
in.
mm
lb.
kg
Standard Pack
1⁄4-23⁄8
6-60 6-60
13⁄4 13⁄4
0.8 0.8
1 1
1⁄4-23⁄8
No. 205
3.14 03_Pipe tools.indd 15
4/24/06 9:39:09 AM
Tubing & Conduit Cutters with New X-CEL Features • Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit. • Now includes X-CEL Knob for quicker cutting.
X-CEL™ Knob = quicker cut
• Nos. 10, 15 and 20 feature a convenient fold-away reamer. • No. 30 is rated for larger diameter steel and stainless steel tubing. • No. 15-SI is especially designed for stainless steel tubing. Includes special roller bearings and cutter wheel to make stainless cutting easier. Spare wheel included in knob.
No. 15
Catalog No.
Model No.
32910 32915 32920 32925 32930 32935 32940 32950 97212
10 10 15 15 20 20 30 30 15-SI
Description
Std. Wheel
Screw Feed Cutter Above w/H-D Wheel Screw Feed Cutter Above w/H-D Wheel Screw Feed Cutter Above w/H-D Wheel Screw Feed Cutter Above w/H-D Wheel Stainless Steel Cutter
F-158 E-1240 F-158 E-1240 F-158 E-1240 E-2558 E-2191 E-1525
Capacity in. 1⁄8-1 1⁄8-1 3⁄16-11⁄8 3⁄16-11⁄8 5⁄8-21⁄8 5⁄8-21⁄8
1-31⁄8 1-31⁄8 3⁄16-11⁄8
Weight
mm
lb.
kg
Standard Pack
3-25 3-25 5-28 5-28 16-54 16-54 25-79 25-79 5-28
7⁄8
0.4 0.4 0.6 0.6 0.8 0.8 1.6 1.6 0.6
6 6 6 6 1 1 1 1 1
7⁄8
11⁄4 11⁄4 13⁄4 13⁄4 31⁄2 31⁄2 11⁄3
Quick-Acting Tubing Cutters with New X-CEL Features • Models 151-156 feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. • All Models now include an X-CEL Knob and X-CEL Pin for quicker cutting and wheel replacement.
X-CEL™ Knob = quicker cut
• These cutters are available in models for plastic pipe or metallic tubing. • Models 151 and 152 feature fold-away reamers.
Spare wheel included in knob.
X-CEL™ Pin = quicker wheel change
No. 151
Catalog No.
Model No.
31632 31637 31642 31647 34572 36597 36592 31652 31657 31662 31667
151 151-P 152 152-P 152-P 153 153-P 154 154-P 156 156-P
Std. Wheel
Description Quick-Acting Cutter Above w/Wheel for Plastic* Quick-Acting Cutter Above w/Wheel for Plastic* Above w/Wheel for PVC Quick-Acting Cutter Above w/Wheel for Plastic* Quick-Acting Cutter Above w/Wheel for Plastic* Quick-Acting Cutter Above w/Wheel for Plastic*
E-3469 E-2155 E-3469 E-2155 E-5272 E-3469 E-2155 E-2558 E-2156 E-2558 E-2157
Capacity in.
mm
1/4-15/8 6-42 / -11/4** 10-40** 1/4-25/8 6-66 1/4-2** 10-63** 1/4"-2** 10-63** 32-90 11/4-31/2 1-3** 25-75** 48-116 17/8-41/2 11/2-4** 50-110** 100-170 4-6 5/8 4-6** 110-160**
1 8
Weight lb. / / 17/8 17/8 17/8 2 2 3 3 41/8 41/8 7 8 7 8
kg 0.4 0.4 0.9 0.9 0.9 0.9 0.9 1.4 1.4 1.9 1.9
Standard Pack 6 6 1 1 1 1 1 1 1 1 1
*Plastic models include spare cutting wheels for cutting copper **Nominal Plastic Pipe Size
RIDGID Quick-Acting plastic cutter models are equipped to easily convert to cut copper or other metallic tubing. 1.) Remove spare copper cutting wheel from knob. 2.) Reverse knob position so that the “Cu” notation is visible inside the knob. 3.) Screw knob back on to handle. 4.) Using the X-CEL Wheel Pin, you can quickly replace the existing plastic cutting wheel with the copper cutting wheel. You’re now ready to cut copper, aluminum, and brass tubing. 5.) When you wish to revert to plastic cutting, follow the same instructions but make sure to reposition knob so that “PE” and “PVC” notations are visible inside knob.
3.15 03_Pipe tools.indd 16
4/24/06 9:39:15 AM
Tubing Cutters
Internal Tubing Cutters • For trimming tubing below floor level for shower/floor drain installations, or above the ceiling for sprinkler head installations. • Model 106 features a tool steel and aluminum body while 108 and 109(P) have cast iron bodies. • Each model features hardened steel rollers and cutter wheels. • Model 109P is equipped to cut PVC or ABS plastic. • Model 102 internal cutter features reamer type end for ease of entry into distorted or burred tubing, and will cut lengths from 5/16"- 41/2" (8 mm-113 mm). Catalog No.
Model No.
33005
106
Description
Capacity
Std. Wheel
Internal Cutter
E-2558
in. 2-3 Nominal / -25/8 Depth 11/4-2 Nominal 1/4-13/4 Depth 21/2-4 Nominal 1/4-21/8 Depth 21/4-4 Nominal 1/4-21/8 Depth 1/2-3/4 Nominal 1 4
83240
108
Internal Cutter
E-2558
83290
109
2-Handle Internal Cutter
E-2558
83295
109-P
Above w/Wheel for Plastic
E-5299
32970
102
Lathe-Type Internal Cutter
E-983
No. 108
Weight
mm
kg
Standard Pack
23/8
1.1
1
2
0.9
1
4
1.8
1
4 11/8
1.8 0.5
1 1
lb.
50-75 6-67 6-50 6-45 60-100 6-54 60-100 6-54 12-20
Plastic Pipe Cutters Models 138 and 1493 Ratchet Cutters • Designed for quick, clean cuts through plastic pipe and tube. • These cutters feature compound leverage ratchet mechanisms and hardened steel blades. • Model 138 offers one-hand operation. • Do not use to cut plastic coated metallic tubing or pipe.
Models BK-100S and BK-125S Scissor Cutters No. 138
• Easy-to-use tools that can cut most grades of plastic and rubber pipe and tubing, including Sch. 40 PVC. • Spring loaded handles provide instant adjustment to proper pipe size. • “Burr-less” cutting operation provides a square cut. • Replaceable stainless steel cutting blade folds into handle for safe handling and carrying. • Small profile makes it ideal for limited working spaces and carrying in back pocket or tool pouch. • Do not use to cut plastic-coated metallic tubing or pipe.
No. 1493
Catalog No.
Model No.
Description
Std. Wheel
91125 12831 73842 73847
138 1493 BK-100S BK-125S
Plastic Pipe Cutter Plastic Pipe Cutter 1" Plastic Pipe Scissors Cutter 11⁄4" Plastic Pipe Scissors Cutter
92170 22086 73852 73857
Capacity in. 1⁄8-11⁄2 O.D. 1⁄8-23⁄8 O.D. 15⁄16 15⁄8
mm 3-38 3-60 32 42
Weight lb. 11⁄4 21⁄2 0.4 0.4
kg 0.6 1.2 0.1 0.1
Standard Pack 1 1 6 6
No. BK-100S & No. BK-125S
3.16 03_Pipe tools.indd 17
When using the BK-100 or 125 to cut Sch. 40 PVC, it is necessary to rotate the cutter up and down at 90° while piercing through pipe.
4/24/06 9:39:23 AM
Always use genuine RIDGID Cutter Wheels. These wheels are precision-machined from high-grade steel and are engineered for long life and maximum cutting accuracy.
Cutter Wheels
Catalog No.
Model No.
33210 33165 33200 74720 74730 74735 33175 33170 83235 33205 33185 34695 33190 33195 33180 33160 88260 41852 96397 33551
E-702 E-1240 E-1740 E-2155 E-2156 E-2157 E-2191 E-2558 E-2880 E-2990 E-3469 E-3495 E-4546 E-5272 E-5299 F-158 E-10279 M-50 E1525 122SS
31667
33055
93492
10973
205
122
122XL
31652 154
31662
36592 153-P
156-P
36597 153
31657
31647 152-P
156
31642 152
154-P
31637 151-P
83290
83295
83240
109
31632
33005
108
151
31622
106
109P
32975/32985/97787
30P/133P
150
32940
32945
30/133
103/104/117
32930 20
32955
97212 15-SI
40617/86127
32920 15
40
32910 10
101/118
Catalog No.
Tubing Cutters (Original Product)
Model No.
Replacement Cutting Wheels
Std. Blade Pk. Exp. 1 12 1 1 1 1 6 6 1 1 12 1 6 6 6 12 1 1 1 1
.500 .162 .147 .286 .412 .500 .292 .220 .747 .112 .149 .290 .162 .290 .412 .149 .185 .250 .120 .292
Application ▲
▲ ▲
▲ ▲ ▲ ▲
• ▲
▲
•
•
• • • • • •
▲
• •
▲ ▲
• •
• Denotes Cutter Wheels furnished with original product.
•
▲
Heavy Wall PVC, ABS Steel - SS ▲ ▲ ▲ Soft Flexible Plastic PE, PB, PP, Std. & Heavy Wall • • • ▲ PE, PB, PP, Std. & Heavy Wall • PE, PB, PP, Std. & Heavy Wall ▲ • ▲ ▲ • ▲ Steel Tubing Aluminum & Copper • • ▲ PE, PB, PP, Std. & Heavy Wall Steel, Aluminum & Copper Aluminum & Copper • • • • ▲ ▲ ▲ ▲ Aluminum ▲ ▲ ▲ ▲ Steel - SS ▲ ▲ PVC, ABS, Std. Wall ▲ ▲ PVC, ABS, Std. Wall Aluminum & Copper ▲ ▲ Thin-Wall PVC Muffler Tail Pipe Stainless Steel ▲ • Stainless Steel
▲ Denotes alternate Cutter Wheel.
3.17 03_Pipe tools.indd 18
4/24/06 9:39:41 AM
Inner-Outer Copper Cleaning Brush
• Combines tube cleaning and fitting brush into one hand tool. • High carbon steel brushes quickly clean ½" or ¾" nominal tube and fittings in preparation for soldering or brazing. • Durable plastic construction designed for easy brush replacement.
Catalog No. 34142 34147
Model No.
Weight
Capacity
4100 –
I-O Copper Cleaning Brush Replacement Brush Set
oz.
g
Standard Pack
31⁄4 11⁄2
90.7 45.3
10 1
Accessories for No. 124 Copper Cleaning Machine • • • • •
Cleaning Brushes: 13 internal, standard-duty wire for ½" – 4" fittings. External Cleaning Brush and Deburring Cutter: For ½" – 2" fittings and ½" – 4" tube. Reamer: Replaceable blade for ½" – 2" tube. Accessories: No. 126 Facing Cutter – Replaceable hardened steel insert. Fitting Brushes: Small internal brushes for refrigeration and air conditioning. Standard-Duty Brushes Model No.
Catalog No.
Catalog No.
Model No.
Description
47395 46425 46450 42295
126 E-6128 E-6212-X D-1415
4" Facing Cutter 2" to 4" Brush Arbor 5" to 6" Brush Arbor External Brush
Weight lb.
kg
13/4 1/4 11/4 3/4
0.7 0.08 0.5 0.3
Brushes for No. 124 Machine
42245 42250 42255 42260 42265 42270 42275 42280 42285 42290 **42300 –
Weight
Description
E-5715 E-5720 E-5721 E-5722 E-5723 E-5724 E-5725 E-5726 E-5727 E-5728 **D-1545 –
oz.
/ " (10 mm) Fitting Brush 1/2" (13 mm) Fitting Brush 3/4" (19 mm) Fitting Brush 1" (25 mm) Fitting Brush 11/4" (32 mm) Fitting Brush 11/2" (38 mm) Fitting Brush 2" (51 mm) Fitting Brush 21/2" (64 mm) Fitting Brush 3" (76 mm) Fitting Brush 4" (102 mm) Fitting Brush 5" (127 mm) Fitting Brush 6" (152 mm) Fitting Brush
g
1 1 1 2 2 4 6 8 10 14 16 18
3 8
28 28 28 56 56 113 170 227 283 397 454 510
** Requires Brush Arbor Catalog No. 46450. See ordering information this page.
Conduit Sizing Tool
No. 575 EMT Sizing Tool for Conduit • Quickly resizes thin-wall conduit ends that have become deformed after installation. • Tool can also be used for slight bending of ½" and ¾" conduit ends for alignment purposes. • Hardened alloy steel resists wear. Catalog No. 36005
Model No. 575
Capacity ½" (12 mm) and ¾" (19mm) EMT
Weight lb. 13⁄8
kg 0.6
Standard Pack 1
3.18 03_Pipe tools.indd 19
4/24/06 9:39:42 AM
Reamers, Deburring Tools No. 127 Inner-Outer Reamer • Handy for quick, clean and easy I.D. reaming and O.D. beveling of 1/4" through 11/2" nominal water tube. • Plastic construction with long-wearing alloy steel blades. • Gives fast, professional reaming on copper, aluminum, brass and other types of tubing. Catalog No. 34965
Model No.
Weight lb. g
Capacity 1⁄4" (6 mm) through 11⁄2" (37 mm) Nominal Water Tube
127
1⁄4
Standard Pack
113
1
No. 227 Inner-Outer Reamer • 46 cutting edges on interior cone allow for fast, clean, inner reaming and outer deburring/beveling of 1/2"-2" (12mm-54mm) copper and stainless steel tubing. Hardened steel construction. Catalog No. 95772
Model No.
Weight lb. g
Capacity 1⁄2" (12 mm) through 2" (54 mm) Copper and Stainless Tubing
227
11⁄4
Standard Pack
560
1
Deburring Tools • Deburring Tool for plastic pipe and tubing. • Made of high-grade steel with specially-designed, long-lasting cutting edges. • Slip-resistant vinyl hand grip. • Ideal for removing outside ridges and inside burrs on plastic pipe and tubing. Catalog No.
Model No.
Plastic Pipe Capacity
Description
in.
Plastic Tubing Capacity, I.D.
mm
in.
mm
Standard Pack
35155
72
Deburring Tool
/ -11/2
12-40
/ -21/8
20-53
6
64962
73
Deburring Tool
11/2-3
40-76
–
–
6
64967
74
Deburring Tool
4
100
–
–
6
1 2
3 4
3.19 03_Pipe tools.indd 20
4/24/06 9:39:45 AM