...sets ...setztstandards MaĂ&#x;stäbe
2009 Lasers Spirit levels Rules Measuring tapes Levelling boards Accessories
1865
2009
History The folding rule is a STABILA invention. In 1865, in a small village in Germany, the foundation stone was laid for an ideas factory, whose inventions and patents simplified, improved and revolutionised measurement. The insistence on top quality runs like a marking thread throughout our company’s history.
How seriously do you take your work? Any craftsman, architect or DIY enthusiast who is serious about his work sooner or later chooses the products with the black and yellow trademark. Measuring instruments that are accurate and remain accurate and where all the components are of the same high quality.
STABILA 2–3
Our best tool: an inventive mind
From 1865 to the present day: inventions + patents + innovations
As with many things in life, the same applies to measuring instruments: top quality may be a little more expensive initially but it pays for itself over the years. As an example: with a low-quality spirit level, the vial is glued, screwed or jammed in. Even if it was accurately positioned during assembly, every time it is used, it can change its position. If you then bring the vial bubble horizontal, the measurement surfaces are tilted. STABILA therefore manufactures spirit levels with firmly cast in, electronically measured vials. One of our many patents. So, with STABILA, horizontal stays horizontal. For which we give a 10-year guarantee.
The best idea of all time for measuring: the foldable rule.
+Easy to carry – measuring straight lines: the spring joint allows the sections to lock tightly together when opening or closing the rule.
+The principle of the tape measure owes its origin to the coilable rule.
+Unbreakable acrylic glass vials
bring the age of ordinary glass to an end for spirit levels.
+Robust, distortion-free, light metal spirit levels replace the wooden spirit levels that have been used for centuries.
+A patent which has still to be
surpassed provides spirit levels with life-long accuracy – STABILA casts the vials permanently into place in the profile.
+Just as unique: the spiked hook at the end of the pocket tape measure prevents the end from slipping.
Creative idea: STABILA incorporates a laser into the spirit level. A precision base-plate allows all-round measurement; the sighting system means that the instrument can be used over long distances.
+Spirit levels become more innovative
every year: patented impact protection for brick-layers, special models for electricians and plumbers with standard measurement systems, extra-strong rare earth magnets and anti-slip stoppers to prevent movement, electronic spirit levels with acoustic signals, telescopic systems for extremely long spirit levels.
+And, of course, the laser also benefits
from the wealth of inventions discovered by this long-established company: the unique protector system protects the lasers used on construction sites if they fall over or are dropped. Other lasers are equipped with an integral protective frame and their height can be varied. A special laser revolutionised pipe-laying and cable installation in wooden framework walls and beam construction. Receivers for lasers with a modulated pulse line and a new generation with digital displays complete the range of modern measuring technology.
STABILA 4–5
8–11
Laser units
A guide to the right laser for you
12
The different laser functions
13
Laser spirit levels Type 70 LM-P+L | Type 80 LMX-P+L
14–15
Point lasers Type HL 100 | Type LA-4P
16–17
Line lasers Type LA-2PL
18–19
Type LAX 50
20–21
Type LAX 200
22–23
Rotation lasers Type LAPR 100 | Type LAR 100
24–25
Type LAR 200
26–27
Type LAR 250
28–29
Receiver REC 300 Digital
30–31
The Combi-Sets: Allround, Outdoor, Universal, LAPR 100
32–33
Distance measurers LD 300 | LD 400
34–35
LD 500
36–37
Overview of functions
38–41
Accessories | Levelling rods | Tripods
STABILA laser measuring instruments 6–7
A guide to the right laser for you: Where? What? What with? Site preparation and pipe-laying Rotary horizontal levelling, inclined surfaces Range up to 350 m 26 LAR 250 rotation laser Rotary horizontal levelling Range up to 550 m LAR 200 rotation laser
24
Road-works/garden lay-out and land scaping Rotary horizontal and vertical levelling, inclined surfaces Range up to 350 m 26 LAR 250 rotation laser Rotary horizontal levelling Range up to 550 m LAR 200 rotation laser
24
Reinforced concrete construction
Carpentry/Timber construction
Tiling
Window construction
Rotary horizontal and vertical levelling, inclined surfaces, plumb-lining, aligning, 90° angles Range up to 350 m 26 LAR 250 rotation laser
Horizontal levelling, plumb-lining Visible line range up to 10 m/range with REC 210 Line supplementary receiver up to 100 m 16 LA-2PL plumb-lining laser REC 210 Line receiver 38
Horizontal levelling, plumb-lining Visible line range up to 10 m/range with REC 210 Line supplementary receiver up to 100 m 16 LA-2PL plumb-lining laser REC 210 Line receiver 38
Rotary horizontal levelling, plumb-lining Range up to 550 m 24 LAR 200 rotation laser
Rotary horizontal levelling, plumb-lining Range up to 550 m 24 LAR 200 rotation laser
Rotary horizontal and vertical levelling, inclined surfaces, plumb-lining Range up to 300 m LAR 100 rotation laser
Rotary horizontal levelling Range up to 550 m LAR 200 rotation laser
24
Rotary horizontal and vertical levelling, 90° angles Range up to 350 m 26 LAR 250 rotation laser
20
Rotary horizontal and vertical levelling, 90° angles Range up to 180 m LAPR 100 rotation laser
22
23
Rotary horizontal and vertical levelling, plumb-lining Range up to 180 m 22 LAPR 100 rotation laser
Masonry work
Rotary horizontal and vertical levelling Visible line range up to 20 m LAX 200 crossed-line laser
Rotary horizontal and vertical levelling Visible line range up to 20 m /range with REC 210 Line supplementary receiver up to 250 m 20 LAX 200 crossed-line laser REC 210 Line receiver 38
Laying floors and screeds Rotary horizontal levelling Range up to 550 m LAR 200 rotation laser
24
Horizontal levelling, plumb-lining Visible line range up to 10 m / range with REC 210 Line supplementary receiver up to 100 m 16 LA-2PL plumb-lining laser REC 210 Line receiver 38
STABILA laser measuring instruments 8–9
A guide to the right laser for you: Where? What? What with?
Safety advice: The double safety system that we use ensures that the laser’s power in our systems does not exceed that for laser Class 2 (under 1 milliwatt). Nevertheless, you should strictly avoid looking directly into the laser beam!
Steel and metalwork Rotary horizontal and vertical levelling, 90° angles, plumb-lining Range up to 300 m 23 LAR 100 rotation laser 90° angles, plumb-lining, aligning Range up to 60 m LA-4P 4 point laser 15
Interior work / Dry-walling Horizontal levelling, plumb-lining Visible line range up to 10 m/range with REC 210 Line supplementary receiver up to 100 m LA-2PL plumb-lining laser 16 REC 210 Line receiver 38 Rotary horizontal and vertical levelling Visible line range up to 20 m/range with REC 210 Line supplementary receiver up to 250 m LAX 200 crossed-line laser 20 REC 210 Line receiver 38
Cabinet-making and joinery Rotary horizontal and vertical levelling, inclined surfaces, plumb-lining Range up to 350 m 26 LAR 250 rotation laser 90° angles, plumb-lining, aligning Range up to 60 m 15 LA-4P 4 point laser
Rotary horizontal and vertical levelling Visible line range up to 20 m / range with REC 210 Line supplementary receiver up to 250 m LAX 200 crossed-line laser 20 38 REC 210 Line receiver Rotary horizontal and vertical levelling, 90° angles, plumb-lining Range up to 300 m 23 LAR 100 rotation laser
Rotary horizontal and vertical levelling, measuring diagonals Visible line range up to 20 m / range with REC 210 Line supplementary receiver up to 250 m LAX 200 crossed-line laser 20 REC 210 Line receiver 38
Installation work Rotary horizontal and vertical levelling, inclined surfaces, plumb-lining Range up to 350 m 26 LAR 250 rotation laser Rotary horizontal and vertical levelling, inclined surfaces, plumb-lining Range up to 300 m 23 LAR 100 rotation laser
Electrical installation Rotary horizontal and vertical levelling, plumb-lining Range up to 180 m LAPR 100 rotation laser
Plumbing
22
Rotary horizontal and vertical levelling Visible line range up to 20 m / range with REC 210 Line supplementary receiver up to 250 m LAX 200 crossed line laser 20 REC 210 Line receiver 38
Rotary horizontal and vertical levelling Visible line range up to 20 m /range with REC 210 Line supplementary receiver up to 250 m LAX 200 crossed line laser 20 REC 210 Line receiver 38 Rotary horizontal and vertical levelling, inclined surfaces, plumb-lining Range up to 300 m LAR 100 rotation laser
23
Horizontal levelling, plumb-lining Visible line range up to 10 m /range with REC 210 Line supplementary receiver up to 100 m 16 LA-2PL plumb-lining laser 38 REC 210 Line receiver
STABILA laser measuring instruments 10–11
The different laser functions Point function
The laser beam is visible as a dot on the viewed surface.
Plumb-line function
Point function with 90° penta prism
The laser beam is emitted at right angles to the horizontal beam.
Rotation function, horizontal
Line function, horizontal
The laser projects a horizontal line onto the wall.
Rotation function, vertical
Line function, vertical
The laser projects vertical lines onto floors, walls and ceiling.
Inclination function
Two lasers in one unit: Short laser spirit-level with point and line modes. Strong magnet for fast and accurate levelling on the base-plate which comes with the instrument. Patented sighting system makes the level easy to use even in bright daylight.
Type 70 LM-P+L Set with magnets and line function Laser functions
Comprising: 30 cm laser spirit level with point and line modes, patented sight system, base plate, laser goggles and target plate with rule, all in a strong plastic carrying case. Laser class
Output
Laser wavelength
Levelling accuracy
Working range
2
‹ 1 mW
650 nm
± 0.5 mm/m
80 m
Type 80 LMX-P+L Complete Set with line function
Battery life
Two lasers in one unit!
Patented sight system
Laser functions
The laser beam rotates horizontally through 360° around its vertical axis.
The laser beam rotates vertically through 360° around its vertical axis.
Inclination of the levelling plane to meet requirements.
Laser class
Output
Laser wavelength
2
‹ 1 mW
635 nm
Levelling accuracy
Vertical vial accuracy
± 0.25 mm/m ± 0.5 mm/m
Working range
80 m
Battery life
Art. No.
approx. 12 h 14803/4
Comprising: 40 cm high-intensity beam laser spirit level Type 80 LMX-P+L with point and line mode, patented sight system, heavy base plate, beam separator Penta prism, target plate with rule and laser goggles, all in a strong plastic carrying case. Transfers a determined point from the floor to the ceiling.
Patented sight system
Two lasers in one unit!
The professional’s laser spirit-level: • Horizontal vial five times more sensitive than normal spirit level vials to provide the highest precision • Beam splitter Penta prism supplied for right angles, vertical alignments, partition walls, etc. • With additional line function for easy wallpapering – even on slopes.
Art. No.
approx. 12–16 h 14140/0 STABILA laser measuring instruments 12–13
Pipe-laying laser Type HL 100
Small, compact and operated with one hand but big in performance and convenience. The self-levelling 4-point STABILA LA-4P laser is lightning fast, ready to use and measures with laser precision. Supplied as standard
Point laser for marking continuous rows of holes. Range of application: horizontal, inclined or as a plumb-line. Rotating grip for lateral alignment
Large centring screw for hole diameters of around 80 to 120 mm
with wall bracket and multi-purpose platform, which extends its range of application enormously. Ideal for interior work, dry-walling, timber work, carpentry, structural steelwork, installation work and much more.
Small centring screw for hole diameters of around 22 to 75 mm
LA-4P 4-point laser
LA-4P
Laser functions Comprising: LA-4P 4-point laser, multipurpose platform, wall bracket and 2 target plates. In a sturdy carrying case.
1
Rotary grip for horizontal adjustment Laser casing adapter plate (for a firm seat for the laser when using the large centring screw)
Laser functions complete set
Comprising: pipe-laying laser Type HL 100, laser goggles, target plate with rule. In a sturdy carrying case. Laser class
Output
Laser wavelength
Levelling accuracy
Hole diameter
Inclination range
2
‹ 1 mW
650 nm
± 0.5 mm / m
22 mm–120 mm
± 3°
Battery life
The standard multipurpose platform has a tiltable holder, onto which the LA-4P docks. It can be screwed on and fastened down – rare earth magnets provide a firm grip on iron and steel.
2
Art. No.
approx. 48 h 16168/2
1 Traditional pipe installation: no parallel holes. 2 Pipe installation with the HL 100: rows of parallel holes behind each other.
Laser class
Output
Laser wavelength
Self-levelling range (horizontal)
Laser beam accuracy horizontally
Laser beam accuracy at 90° angle
Laser beam accuracy vertically upwards
2
‹ 1 mW
635 nm
approx. ± 4°
± 0.2 mm/m
± 0.2 mm/m
± 0.3 mm/m
Laser beam accuracy vertically downwards
Working range
Art. No.
± 2.0 mm/m
60 m
16145/3
STABILA laser measuring instruments 14–15
• Fast self-levelling quality pendulum laser switch on and get going. • The ultra-sharp, wide-angle horizontal line is always easily visible. The wideangle aperture provides an extra-long line. You can make even faster and more accurate progress with your work.
Plumb-level line laser Type LA-2PL Laser functions
• Bi-directional plumb laser: plumb up/down from floor to ceiling at the same time easy marking and transfer even in high rooms and poor weather. • Quality made in Germany. You know what you’ve got.
The new performance class from STABILA makes you perform better: the wide-angle horizontal laser line and two plumb lasers optimise the most important laser functions when erecting wood or metal structures. Can be used anywhere. The Type LA-2PL plumb-level line laser can be used on the floor, on a tripod, on building components and, as illustrated here, on the rotating multi-purpose platform.
LA-2PL
The LA-2PL is the first STABILA laser with a modulated pulse line. The extra-wide 150° aperture for the horizontal laser line makes the LA-2PL perhaps the longest spirit level in the world. A spirit level which can go round corners like child’s play. You can use the REC 210 Line receiver to extend the range of functions and applications: See page 38.
Comprising: plumb-level line laser LA-2PL, multi-purpose platform, target plate, wall mounting bracket and belt pouch. In a sturdy carrying case. Laser class
Output
Laser wavelength
Self-levelling range (horizontal)
Laser beam accuracy horizontally
Line inclination
Laser beam accuracy vertically upwards
Laser beam accuracy vertically downwards
Range of visible line
2
‹ 1 mW
630–660 nm
approx. ± 5°
± 0.3 mm/m
± 0.2 mm/m
± 0.3 mm/m
± 0.3 mm/m
10 m
Batteries (included)
Art. No.
4 x 1.5 V AA 16818/6
The LA-2PL can be positioned among suspended ceiling support profiles using the multi-purpose platform and wall mounting bracket.
The wall bracket can be secured by screws or nails.
Rare-earth magnets clamp the multi-purpose platform to iron and steel: 5 times more firmly than conventional ferrite magnets.
The extendable centering feet fix the laser into a tube. The plumb up and down function is centred in this way.
STABILA recommends the high-performance Type REC 210 Line receiver and the NL levelling rod. Further information on pages 38–39.
STABILA laser measuring instruments 16–17
Very flexible in use – Part 1. Switch on – ready to use. The STABILA LAX 50 projects crossed horizontal and vertical lines in a matter of seconds – both perfectly levelled. Ready for all internal work. The result – long, easily visible horizontal and vertical laser lines at right angles to each other which make setting-out easy.
For the installation of built-in furniture, laying tiles, wall-papering and all installation work. Setting out without a single pencil mark. That’s clean working!
LAX 50
max. 2.75 m
Self-levelling crossed line laser Type LAX 50 including combined tripod /telescopic leg kit
Very flexible in use – Part 2. The main attraction – the combined tripod/telescopic leg kit. Unscrew the tripod legs and screw together to form the telescopic leg – fix the LAX 50 to the leg – and measure! The tripod covers a working height of 0.6–1 m. The telescopic leg can be jammed inbetween floor and ceiling of heights up to 2.75 m. If the LAX 50 is placed on the ground, its working height is 7 cm. Its versatility makes the STABILA LAX 50 a regular partner for all occasions.
Laser functions
Comprising: Type LAX 50 crossed line laser with combined tripod/ telescopic leg kit. Laser class
Output
Laser wavelength
Levelling accuracy
Range of visible line
Battery life
Art. No.
2
‹ 1 mW
635 nm
± 0.5 mm/m
10 m
30 hours
16789/9 Accurate even when used by just one person – change location quickly. The clever tripod-telescopic leg combination makes the LAX 50 a superb all-round laser. STABILA laser measuring instruments 18–19
• Ideal for inside work: the casing in the U-shaped holder can be rotated through 360°. The complete room can be scanned. • Self-levelling, ultra-sharp, long laser lines. • Locked position: allows
slopes to be marked. • Pulsed lines for external applications: working range up to 250 m with the REC 210 Line receiver. • Easy positioning: On the ground, on a tripod, on metal with the V groove and the rare
earth magnet, on the wall bracket. • Perfect protection for the measuring unit: automatic pendulum locking. The optical equipment is fully protected in the parked position.
Optimal dust protection. • Robust: STABILA anti-shocksystem with impact-absorbent cover. Optimal protection for the casing also at corners and edges.
Innovative technology for tilers, dry wallers, carpenters and joiners, electricians, plumbers, steel erectors and brick-layers.
The REC 210 Line line-receiver is included in the complete set.
LAX 200 Crossed line laser Type LAX 200 Parked position: optimal protection of the optical system against dust and scratches by turning the instrument through 180° in the U-shaped holder. V groove and a rare earth magnet – 5 times stronger than ordinary ferrite magnets: optimal hold on metal bars and tubes.
NEW
Laser functions
Comprising Basis Kit: Type LAX 200 crossed line laser, belt pouch. Comprising Complete Kit: Type LAX 200 crossed line laser, belt pouch, REC 210 Line receiver, rotation plate, wall bracket, laser goggles, target plate, robust carrying case.
Laser class
Output
Laser wavelength
Self-levelling range horizontal
2
‹ 1 mW
635 nm
approx. ± 4.5°
* Indoors under typical operating conditions.
Levelling accuracy
Line straightness
± 0.3 mm/m ± 0.2 mm/m
Range, visible crossed line
Range with receiver
Batteries included
Art. Nr. Basis-Kit
Art. Nr. Complete-Kit
20 m*
Up to 250 m
3 x D 1.5 V
17282/4
17283/1
Locking at the touch of a button. Recommended optional accessories: Type NKL inclinometer. Further information on page 41. STABILA laser measuring instruments 20–21
With STABILA’s automatic pendulum rotation laser, you can work at an unbelievable speed with the greatest accuracy. Once erected, the unit is immediately ready for use. The selflevelling range of 1° enables the unit easily to be adjusted for large irregularities of up to 9° by inclining the casing manually. The whole laser casing is fitted with slip-on covers on the high-grade steel handles.
This type of construction enables the laser beam to be adjusted vertically by approx. 12 cm directly on the unit. The rotary laser beam, together with the receiver, also enables you to work without a problem over large distances outdoors.
LAR 100
LAPR 100 Self-levelling pendulum rotation laser Type LAPR 100 Laser functions complete set
Output
2
‹ 1 mW
Laser wavelength
Levelling accuracy
Self-levelling automatic rotation laser Type LAR 100
± 5°
Laser functions complete set
Comprising: LAR 100, remote control, receiver with mounting plate, laser goggles, target plate with rule, strong plastic carrying case. Laser class
Output
Laser wavelength
Levelling accuracy
Receiver working range*
2
‹ 1 mW
635 nm
± 0.1 mm /m
300 m
Battery life
Art. No.
approx. 120 h 15993/1
* At 21 °C, under optimum atmospheric conditions
Comprising: rotation laser Type LAPR 100 with point and line mode, laser goggles, target plate with measuring rod and receiver. In a strong plastic carrying case. Laser class
Vertical rotation: Rotation plane can be switched from horizontal to vertical simply by tilting the projection casing in the frame. The LAPR 100 can therefore stay in a fixed position on a tripod. In vertical mode, a horizontal plumb-line beam serves as a rectangular reference.
Receiver working range*
635 nm ± 0.3 mm/m
180 m
Battery life
Art. No.
approx. 16 h 15583/4
• Automatic levelling for quick and accurate work. • Horizontal and vertical mounting on a tripod, the base plate or on
uneven surfaces, etc. • Motorised automatic levelling for greater accuracy. • Controlled inclination
Inclination mode: The STABILA LAR 100’s levelling plane can be tilted 5° in one direction by remote control.
adjustment around an axis of ± 5°. • Sturdy protective guards • Continuous levelling and rubber seals. compensates for the effects • Convenient remote control. of any vibrations.
* At 21 °C, under optimum atmospheric conditions
STABILA laser measuring instruments 22–23
1. 550 m working range with the REC 300 Digital Receiver. 2. Simple operation – one switch. 3. Extremely robust thanks to the STABILA protector system. 4. Water and dust-proof to IP 65. 5. Machine control applications. Ideal for site preparation, foundations, pipe-laying for sewage and drains, roadworks, landscaping and masonry work.
LAR 200
New receiver technology
Self-levelling horizontal rotation laser Type LAR 200 with the REC 300 Digital Receiver Laser functions Comprising: horizontal rotation laser Type LAR 200 and receiver with clamp in a sturdy case with a rigid exterior.
Laser class
Output
Laser wavelength
Self-levelling range (horizontal)
Laser beam accuracy horizontally
Receiver working range*
2
‹ 1 mW
650 nm
approx. ± 5°
± 0.1 mm/m
Ø 550 m
Batteries (included)
Art. No.
REC 300 Digital Receiver: Further information on pages 28–29.
2 x D 1.5 V 17062/2
* At 21 °C, under optimum atmospheric conditions
The four-stage test procedure demonstrates: Extremely robust.
1. Drop test
2. Water test
3. Heat test
4. Dust test
Extremely robust: if the LAR 200 and tripod are knocked over – no problem! Just set up the tripod again, switch on and start measuring. The STABILA Protector System (patent applied for) cushions severe impacts. Water and dust-proof to IP 65. This says it all. And it is also cold and heat resistant, of course. Easy-to-use: one switch – just
press – one function – fast setup for reliable self levelling. 550 m working range: when linked to the REC 300 Digital Receiver it becomes the winning team for large sites. Machine compatible: the LAR 200 is compatible with most machine controls.
ø 550 m working range
STABILA laser measuring instruments 24–25
350 m operating range plus 8 laser functions plus the extremely robust design of the patented STABILA Protector System. 8 functions means: point, point with 90°,
horizontal line, vertical line, plumb-line, horizontal rotation, vertical rotation, inclination (see page 12). For major projects. For the daily grind. For fitting-out, dry-walling, superstructures,
masonry work, concrete construction and formwork. Water and dust-proof to IP 65.
± 5°
8 functions in one: self-levelling rotation laser Type LAR 250 with the REC 300 Digital Receiver
LAR 250
Laser functions
Output
Laser wavelength
Self-levelling range (horizontal)
Laser beam accuracy horizontally
Receiver working range*
2
‹ 1 mW
635 nm
approx. ± 5°
± 0.1 mm/m
Ø 350 m
Batteries (included)
For this you need the LAR 250 with remote control unit, a folding rule and the REC 300 Digital receiver.
Practical tip: easy alignment of parallel surfaces.
Comprising: rotation laser Type LAR 250, remote control, receiver with bracket, 90° angle rail, laser goggles and target plate, in a rigid carrying case. Laser class
Inclination mode: The STABILA LAR 250’s levelling plane can be tilted 5° in one direction by remote control.
REC 300 Digital Receiver: Further information on pages 28–29.
Art. No.
2
* At 21 °C, under optimum atmospheric conditions
The four-stage test procedure demonstrates: Extremely robust.
2. Water test
3. Heat test
Measure distances A and B from the wall and ensure that they are parallel.
2
Position the laser over point A. Align the laser in the vertical position.
3
Place the receiver over point B.
4
Connect points A and B: rotate the vertical plane in the direction of the receiver using the remote control unit.
A 1
4
1. Drop test
1
2 x D 1.5 V 17106/3
4. Dust test
Vertical levelling: from the tripod with the aid of the metal bracket included with the LAR 250 set or directly on the ground. B 3
1
STABILA-Laser-Messgeräte 26–27
With this digital receiver you can read off the millimetre reference deviation directly in figures from the display. Long range: 8 cm high receiving area. Probably the fastest and most precise correction of heights provided by digital measuring techniques designed for the construction site.
The REC 300 Digital Receiver can be used with most commercially available rotation lasers. Ordering information on page 38.
The advantages of the new REC 300 Digital Receiver
Digital display of the reference deviation in mm. Read the deviation from the reference height directly in figures: exact mm readings. E. g. faster and more precise correction of strut positions and concrete levels. No troublesome moving the receiver on the levelling rod.
Vial
Acoustic signal exit point
Easily readable digital display
REC 300 Digital Receiver: measure more intelligently – work more efficiently.
Extremely practical: the double display. Digital display (in mm) of the divergence from the reference point
Water and dust-proof to IP 67.
+ 34 mm
LAR 200/ LAR 250
LAR 250
+ 5 mm
Accuracy level display Graduated distance symbols
Operating temperature –20°C – +60°C
On/off
Accuracy level selection
Marking line – 12 mm
100 mm high laser reception window
Volume selection Measuring unit selection
Impact protection with non-slip ribbing
Measuring made simple. A series of symbols indicate your distance from the reference height and whether you are too high or low. Two sensitivity levels simplify setting-up over longer or shorter distances. If you also switch on the acoustic signals, you can select two volume levels.
Horizontal levelling
Vertical levelling STABILA laser measuring instruments 28–29
The Combi-Sets • • • • • •
Rotation laser Receiver Levelling rod Tripod Rigid carrying case and more …
STABILA has put together four different Combi Sets for beginners or those wanting to trade-up: • Allround-Set LAR 250 • Outdoor-Set LAR 200 • Universal-Set LAR 100 • LAPR 100-Set The combi-sets offer the ideal equipment in genuine STABILA quality for every use. The advantages are obvious – buy the kit, move it easily, start work perfectly equipped.
NEW Page
Outdoor-Set LAR 200
Page
Universal-Set LAR 100
Page
• Self-levelling rotation laser Type LAR 250
26
24
• Self-levelling pendulum rotation laser, Type LAPR 100
22
28
• Self-levelling, automatic rotation laser, Type LAR 100
23
• Receiver REC 300 Digital with clamp
• Self-levelling horizontal rotation laser, Type LAR 200
• Remote control
23
• Receiver with clamp
22
26
• Receiver REC 300 Digital with clamp
28
• Remote control
• Receiver with clamp
23
• Levelling rod, Type NL
39
• 90° angle rail
26
• Levelling rod, Type NL
39
• Levelling rod, Type NL
39
40
• Levelling rod, Type NL
39
40
40
• Construction tripod with lifting column and spread stopper, Type BST-K-L
40
• Construction tripod with lifting column and spread stopper, Type BST-K-L
• Construction tripod with spread stopper, rapid locking and carrying strap, Type BST-S
• Construction tripod with spread stopper, rapid locking and carrying strap, Type BST-S
• Laser goggles, Type LB
38
• Laser goggles, Type LB
38
38
• Target plate with rule, Type ZP-M
38
Allround-Set LAR 250
• Sturdy case
• Laser goggles, Type LB
38
• Target plate with rule, Type ZP-M
• Target plate with rule, Type ZP-M
38
• Sturdy case
LAPR 100-Set
Page
• Sturdy case
• Sturdy case Art. No.
17203/9
Art. No.
17063/9
Art. No.
15321/2
Art. No.
15798/2
STABILA laser measuring instruments 30–31
The ideal STABILA laser distance measurer for all who want to take a lot of measurements indoors: • Illuminated display • Large figures • Accuracy of measurement typically ± 2 mm • Easy to handle • All the basic functions • Protection class IP 40
Laser distance measurer Type LD 300 Comprising: Laser distance measurer Type LD 300, belt pouch, 2 AAA batteries. Laser class
Output
Laser wavelength
Accuracy typical
Range
Battery life
Batteries (included)
Art. No.
2
‹ 1 mW
635 nm
± 2 mm
0.1–30 m
Up to 3.000 measurements
2 x AAA
17264/0
Do you seem to measure non-stop? Do you need a longer range? Then the LD 400 laser distance measurer is for you: • A comprehensive range of functions including marking out • Memory (the last 10 values)
• Illuminated display • Accuracy of measurement typically ± 1.5 mm • The extra for the professional – the pull-out extension-piece • Protection class IP 54 (rain/dust)
LD 400 Measure up to 60 m
5 functions – summary on pages 36–37
LD 300 Measure up to 30 m
NEW
NEW
Laser distance measurer Type LD 400 Comprising: Laser distance measurer Type LD 400, belt pouch, 2 AAA batteries, with wrist-strap. Laser class
Output
Laser wavelength
Accuracy typical
Range
2
‹ 1 mW
635 nm
± 1.5 mm
0.05–60 m
Battery life
Batteries (included)
Art. No.
Up to 5.000 2 x AAA 17263/3 measurements
11 functions – summary on pages 36–37
Belt pouch for easy carrying. Metal extension-piece in the 90° position: measurement includes the casing length from corners.
Separate button for marking out function.
Belt pouch for easy carrying.
STABILA laser measuring instruments 32–33
Are you looking for precise measurements over long distances – both indoors and outdoors? Do you need extreme flexibility when measuring? Then the LD 500 is your quality partner: • Coloured digital target locator with integral camera – large display – adjustable brightness – 4 x zoom facility • Easy to use: every important function has its own button • Integral angle measurement up to ± 45° • An accuracy of measurement really appreciated by professionals: ± 1.0 mm • Protection class IP 54 (rain/dust)
LD 500
Digital target capture using built-in camera with cross hairs. Coloured, high-contrast display.
Measure up to 200 m /2009 NEW 4
Laser distance measurer Type LD 500 Comprising: Laser distance measurer Type LD 500, plug-in target plate, belt pouch, 2 AA batteries, with wrist-strap. Laser class
Output
Laser wavelength
Accuracy typical
2
‹ 1 mW
635 nm
± 1.0 mm
Range
Battery life
Batteries (included)
Art. No.
0.05– 200 m
Up to 5.000 measurements
2 x AA
17416/3
Thread for fixing the instrument securely to a tripod. Optional accessory: Tripod type FS (Art. No. 14925/3).
The LD 500 and its camera function: • The integral sighting lens locates your target over long distances • You can use the large display screen to sight the LD 500 cleanly • Use the coloured digital target = locator to align the laser precisely on the target • The 4 x zoom facility allows you to zoom in or out of the target • You can adjust the display brightness to suit the ambient light level
Other highlights of the LD 500: • Some functions (Pythagoras function, area, volume, area of a triangle) will also allow you to call up additional information after completing the calculation. A further touch of a button will give you, for example, the circumference, wall and ceiling/ floor areas, trapezoidal areas, angles of inclination, dihedral angle, perimeter of a triangle etc. • Calculator for use with the distances etc you have measured • Memory for constants • Memory for the last 20 figures you measured
Comprehensive package of functions – pages 36–37 Robust, impact-resistant casing with a shock-absorbent softgrip. Fold-out stop bracket: automatic reference switching. Belt pouch for easy carrying. STABILA laser measuring instruments 34–35
Laser distance measurers: Overview of functions a
1) Length measurement.
9) Minimum tracking is used to measure the shortest distance between two points (Minimum tracking).
b
2) Area measurement. 3) Volume measurement.
d
4) Continuous measurement.
1)
2)
3)
4)
5)
5) Determine chain measurement.
LD 300 400 500
LD 300 400 500
LD 300 400 500
LD 300 400 500
LD
–
10) Tracking, for instance to measure the maximum diagonal (Maximum tracking).
c
11) Auto-timer function: e.g. for blur-free measurement from a tripod.
400 500
12) Marking out distances.
6) Pythagoras function 1: calculation of a distance using two related measurements. 7) Pythagoras function 2: calculation of a distance using three related measurements.
13) Trapezoidal measurement: enables the measurement of inclines and distances not accessible directly. 6)
7)
LD 300 400 500
LD
8) –
400 500
LD
–
8) Pythagoras function 3: calculation of a part distance using three related measurements.
–
500
9)
10)
LD 300 400 500
LD
14) Angle measurement: the angle sensor measures angles between ± 45°. –
400 500
±45° 2
LD
12) –
400 500
LD
a –
b c
1
a 11)
a
3
15) Triangular areas: calculates the surface area of a triangle using the lengths of the triangle’s sides.
400 500
13) LD
14) –
–
500
LD
15) –
–
500
LD
–
–
500
STABILA laser measuring instruments 36–37
Accessories Rotation, line and point lasers
Levelling rods
Type ZP-M Target plate with rule Coated plate providing optimum reflection for ease of work even in daylight and over long distances. Art. No.
Type LB Laser goggles Improve the visibility of the laser beam by 50 %. Art. No.
07470/8
07428/9
T-NL anodised aluminium levelling rod. Can be docked with all STABILA laser receivers and receiving units. Also suitable for visual levelling. Extendable up to 400 cm; long-distance visible scale with ‘E’ gradations; reverse side with ‘cm’ gradations. Art. No.
Type REC 210 Line For STABILA line laser with a modulated laser line: Type LA-2PL, Type LAX 200. Art. No.
16851/3
Type REC 300 Digital Reference deviation can be read off directly from the display in mm. Probably the fastest correction of heights. Can be used with most commercially available rotation lasers. Art. No.
Levelling rods NL anodised aluminium levelling rod. For all STABILA laser receivers and receiving units. Extendable up to 240 cm; scale in ‘mm’ gradations; ± 50 cm gradations. With adjustment slide for optimal display clarity and trouble-free height definition. Art. No.
07468/5
A rotation laser, receiver, remote control and levelling rod are an unbeatable team. With it, one person can level quickly and safely over large distances. The work is particularly easy when you use the STABILA NL levelling rod: 1. Align the rod’s zero mark to the laser beam. 2. Move the receiver on the levelling rod to bring it back in line with the laser beam’s height at the new measurement point. 3. The height difference plus or minus can now be read from the NL’s scale.
14406/7
NEW
16957/2 STABILA laser measuring instruments 38–39
Tripods Tripods are one of the most important tools when working with lasers. With the aid of a laser mounted on a tripod (depending on the type and height of the tripod) virtually every height from 50 cm to 285 cm can be levelled horizontally. Modern tripods are made from aluminium and are therefore very light but also very sturdy. The different designs of the leg extension and locking mechanisms also enable the tripod to be erected quickly on uneven surfaces. Type BST-S Construction tripod with spread stopper, rapid locking and carrying strap Height: approx. 160 cm Weight: 4.5 kg Art. No.
07498/2
Type BST-K-L Construction tripod with lifting column and spread stopper Height: approx. 220 cm Weight: 6.5 kg
Art. No.
14040/3
Type BST-K-XL Construction tripod with lifting column and spread stopper Height: approx. 285 cm Weight: 7 kg
Art. No.
16842/1
Type SB tripod bracket For installing rotation lasers close to the ground. Fitted onto the bottom of the lifting column of the BST-K-XL in its unextended position. The height is adjusted using the crank mechanism. Art. No.
16843/8
Type NKL inclinometer Simple to operate, robust design. Scale shows degrees and percent. 5/8Ë? thread.
Art. No.
16782/0
Type NK 100 base plate Ideal for indoor construction work: a height-adjustable base plate (wall-mounting bracket) for rotation lasers. Hung on a nail or a profiled track. Range of applications: hanging suspended ceilings, screeding, etc. Art. No.
16782/0
STABILA laser measuring instruments 40–41
44–47 The main elements of a traditional spirit level Spirit levels 48–49 Type 70 | Type 70 T | Type 70 P-2-2 | Type 80 E 50–51 Type 80 A | Type 80 AM 52–53 Type 81 S | Type 81 S REM | Type 81 SV REM W45 | Type 81 SV REM W360 54–55 Type 82 S | Type 83 S 56–57 Type 96 | Type 96-2-M | Type 196-2 58–59 Type 196-2 LED | Type 80 A electronic 60–61 Type 196-2 electronic | Type 196-2-M electronic 62–63 Type 106 T | Type 106 TM
Spirit levels
Special spirit levels 64–65 Plumber’s spirit level Type 80 M Installation 66–67 Electrician’s spirit level Type 70 electric 68–69 Electrician’s spirit level Type 101 Pocket M | Bricklayer’s spirit level Type 96-2 K / Type 196-2 K 70–71 Marking spirit level Type 70 MAS | Accessories
STABILA spirit levels 42–43
How do you recognise a good spirit level? 1. Extremely precise measurements. 2. Permanently reliable measurements. 3. Excellent clarity of display. 4. Built for use on construction sites. 5. Optimum ease of use.
The STABILA Type 196-2 spirit level perfectly combines all these advantages. Good visibility of vial and air bubble: the horizontal vial can be seen through an angle of up to 300°. One horizontal and two vertical vials. Measuring accuracy in the normal position and overhead 0.5 mm/m.
Vial block made from acrylic glass turned on CNC machine tools. Integral, corrosion-free vial rings. No bubble displacement caused by static electricity or mechanical interference.
PUNASUTRPEASNSET D!
Fluorescent vial fluid with excellent resistance to UV radiation.
Lasting precision ensured by stable vial block holder and cast-in vial.
Removable end caps. Two milled measuring surfaces: The spirit level can be used in every position.
>0,5 mm/m
STABILA
Asian
Patented anti-slip stopper.
s 10 yeatree guaran
Ultra-rigid, powder-coated rectangular aluminium profile.
Finger-grip openings for a secure hold.
Commercially available
Normal commercially available and Asian spirit levels without the patented STABILA vial block retaining system soon lose their accuracy of measurement at low temperatures.
STABILA spirit levels possess excellent temperature resistance. Precision readings from –20 °C to +40 °C. STABILA spirit levels 44–45
The different types of vials Coated measuring surface
Milled measuring surface
Horizontal vial Horizontal measurements
Vertical vial Vertical measurements
Angle vial Measurement of a range of slopes
45° angle vial Fixed slope measurement
Six ring vial Rapid slope measurement
Measuring surface with bridging plates – for bridging uneven areas of wood or masonry.
The measuring surfaces The measuring surfaces on spirit levels can be designed in various ways. In most cases, the complete body of the spirit level, including the measuring surface, is powder-coated, painted or anodised, but on some spirit levels the measuring surface is also milled flat after the coating process. In every case, it is important that the surface be completely smooth. For this reason, not every side of a spirit level can be used as a measuring surface.
1
The end caps Permanent impact-resistant plastic end caps are used to protect the measuring surfaces. The upright height of the level’s hollow profile must be appropriately dimensioned to provide good shock-absorption. STABILA also provides end caps with practical additional functions.
The aluminium spirit level profile The profile constitutes an extension of the vial and must therefore be made of a lasting and stable material. This material combines great practicality, low weight and optimum handling. Smooth rectangular profile
Rectangular profile T cast profile with ribs for improved handling and reinforcement
Double T cast profile
Milled measuring surface with super-powerful rare earth magnet system – the optimum system for steel construction work.
2
1 Standard end caps: Impact and shock-resistant. 2 End caps with patented anti-slip stopper: holds firm even when laid with just one hand. Convenient for marking out. Greater security.
Milled measuring surface with a V-shaped groove – for extra secure adhesion to pipes and other steel items.
3 Removable end caps: Mark right into corners – lay on narrow edges. 3 STABILA spirit levels 46–47
Type 70
Type 70 P-2-2
Traditional spirit level with smooth sides, electrostatic powder coating and one vertical and one horizontal vial. The ideal all round level for household, DIY and professional use.
A long spirit level based on Type 70 but with two additional bridging plates on the underside of the profile and two horizontal vials. The bridging plates will bridge uneven areas, e.g. on warped beams. This makes it the ideal spirit level for working with timber frame constructions, prefabricated walls and building panels, pre-cast concrete components, pre-fabricated form-work etc. The two horizontal, offset vials ensure they can be easily read from any position.
Light metal rectangular profile with 1 vertical and I horizontal vial. Measurement accuracy: in normal position 0.029° = 0.5 mm/m. Length
30 cm
40 cm
50 cm
60 cm
80 cm
100 cm
120 cm
Light metal rectangular profile with 2 vertical vials and 2 horizontal vials. Measurement accuracy: in normal position 0.029° = 0.5 mm/m. 150 cm
180 cm
200 cm
Art. No. 02281/5 02282/2 02283/9 02284/6 02286/0 02288/4 02289/1 02290/7 02291/4 02292/1
Length
150 cm
180 cm
200 cm
Art. No. 02420/8 02421/5 02422/2
Also available as Type 70 M with magnets and as Type 70 W with protractor.
Type 70 T Light metal rectangular profile with 1 horizontal and 1 vertical vial. Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. Length
25 cm
Art. No. 02199/3
Also available with magnets as Type 70 TM and with magnets and angle measurement as Type 70 TMW.
Only 25 cm in length, this spirit level is so handy that you can carry it around with you all the time. The vertical and horizontal vials are firmly secured in the strong light metal profile.
Type 80 E
Light metal rectangular profile with 1 vertical and 1 horizontal vial, anodised colour. Measurement accuracy: in normal position 0.029° = 0.5 mm/m. Type Length
30 cm
40 cm
50 cm
60 cm
80 cm
90 cm
100 cm
120 cm
150 cm
180 cm
200 cm
80 E Art. No. 02431/4 02432/1 02433/8 02434/5 02435/2 02439/0 02436/9 02437/6 02440/6 02441/3 02442/0 80 E-2 Art. No.
—
02402/4 02403/1 02404/8 02405/5 02409/3 02406/2 02407/9 02410/9 02411/6 02413/0
Also available as the 80 E-2 with 2 vertical vials.
Traditional spirit level with smooth sides, two vertical and one horizontal vial but with anodised colour, electrostatic powder coating.
STABILA spirit levels 48–49
Type 80 A
Type 80 AM
This spirit level can be used to check the horizontality of overhead surfaces by turning it and its horizontal vial upside down. In this so-called “transfer” position, you can then measure precisely from underneath.
Spirit level such as Type 80 A – with an additional system of super-powerful rare earth magnets in the milled measuring surface. Rare earth magnets have five times the holding power of traditional ferrite magnets. No more slipping. You always have your hands free when aligning metal posts and beams. They are also suitable for overhead measurements. The ribbed light metal rectangular profile ensures a secure grip when using work gloves.
Light metal rectangular profile with milled measuring surface (up to 120 cm) and 1 vertical and 1 horizontal vial. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m. Type
Length
30 cm
40 cm
50 cm
60 cm
80 cm
90 cm
80 A Art. No. 16047/0 16048/7 16049/4 16050/0 16051/7 80 A-2 Art. No.
—
16054/8
—
—
100 cm
120 cm
16052/4 16053/1
150 cm
180 cm
200 cm
—
—
—
16055/5 16056/2 16057/9 16058/6 16059/3 16060/9 16061/6 16062/3
Also available as the 80 A-2 with 2 vertical vials.
Normal position and overhead measurement
Only spirit levels, whose vials are suitable for overhead measurement, provide reliable measurement in this position.
Light metal rectangular profile with milled measuring surface (up to 120 cm), 1 vertical and 1 horizontal vial, 2 or 4 rare earth magnet systems depending upon the length. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m. Length
40 cm
60 cm
80 cm
100 cm
120 cm
150 cm
180 cm
200 cm
Magnets
2
2
2
2
2
4
4
4
Art. No. 16063/0 16064/7 16065/4 16066/1 16067/8 16068/5 16069/2 16070/8
Rare earth magnets: 5 times stronger than normal ferrite magnets. STABILA spirit levels 50–51
Type 81 S This level’s distinctive shape shows that it is a special type. It is made from pressure-cast light metal and its slim, bevelled shape makes it suitable for working in cramped spaces. It handles overhead measurements as easily as it resists hard shocks.
Type 81 SV REM W45 Light metal die cast profile with milled Length 25 cm 25 cm* 40 cm 50 cm 60 cm 80 cm 100 cm measuring surface, 1 vertical and 1 Art. No. 02500/7 02501/4 02502/1 02503/8 02504/5 02505/2 02506/9 horizontal vial. Measurement accuracy: Also available with magnets as Type 81 SM. in normal position 0.029° = 0.5 mm/m, *with belt pouch overhead measurement 0.043° = 0.75 mm/m.
Length
25 cm
Art. No. 16672/4
Light metal die cast profile with milled measuring surface, 1 vertical and 1 horizontal vial, 45° vial and 1 rare earth magnet. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m.
Extra-strong adhesion to pipes and other steel items thanks to the milled measuring surface with a V groove and rare earth magnets.
Type 81 S REM Rare earth magnets: 5 times stronger than normal ferrite magnets. Length
25 cm
Art. No. 15348/9
Light metal die cast profile with milled measuring surface, 1 vertical and 1 horizontal vial, 2 rare earth magnets. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m.
Handy light metal casing in an especially slim form – extremely sturdy. Milled measuring surface. Super-powerful rare earth magnets provide a secure hold. Suitable for overhead measurement.
Type 81 SV REM W360 Identical to Type 81 SV REM W45 – except that it has a scaled vial capable of being rotated through 360° instead of the 45° angle vial.
Milled measuring surface with a V groove and rare earth magnets. For extra secure adhesion to pipes and other steel items. Six ring vial for marking 1 % and 2 % slopes. Fixed 45° vial for direct checking of struts and pipes at 45°. Extra-strong die cast aluminium profile for the most stringent demands. Many advantages to this short 25 cm length. Many fitters, structural steel erectors, pipework installers, scaffolders and installation engineers have waited for this spirit level.
Light metal die cast profile with milled measuring surface, 1 vertical and 1 horizontal vial, capable of being rotated through 360°, and 1 rare earth magnet. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m. Length
25 cm
Art. No. 16670/0
STABILA spirit levels 52–53
Type 82 S
Type 83 S
Easy to maintain and ultra stable: the ideal work-mate for bricklayers and concrete workers. • The special coating protects it from soiling and mortar. Easy to clean acrylic glass bubble level. • Extra-strong and yet slim aluminium die cast profile. • Non-abrasive scale with cm measurement. • Large handhold – easy handling.
This die cast light metal level has two milled measuring surfaces. It is robust and very practical: its two handholds make it very comfortable to use. The horizontal vial can be read from all four sides and both the vertical vials from three sides, whether in normal position or overhead.
Light metal die cast profile with 2 milled measuring surfaces and 1 handhold (length 80 cm with 2 handholds), 1 vertical and 1 horizontal vial. Non-abrasive scale with cm measurement. Measurement accuracy: in normal position 0.029° = 0.5 mm/m. Length
40 cm
50 cm
60 cm
80 cm
Art. No. 02593/9 02594/6 02595/3 02596/0
Light metal die cast profile with 2 milled measuring surfaces and 1 horizontal vial visible from 4 sides and 2 vertical vials visible from 3 sides. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.029° = 0.5 mm/m. Length
40 cm
60 cm
80 cm
100 cm
Art. No. 02542/7 02544/1 02545/8 02546/5
Also available as Type 83 SW with protractor for measuring angles.
The vertical vial in the Type 83 S can be read from 3 sides.
Non-abrasive scale with cm measurement.
The special coating protects it from soiling and mortar.
STABILA spirit levels 54–55
Type 96
Type 196-2
Extra strong light metal rectangular profile with gripping ridges and a new type of removable end caps made from two materials. The removable end caps are also equipped with well-proven patented anti-slip stops.
Extra strong light metal rectangular profile with gripping ridges and a new type of removable end caps made from two materials but with two additional gripping holes in costly 2-component technology for a secure, firm grip.
Light metal rectangular profile with removable end caps and 2 milled measuring surfaces, 1 vertical and 1 horizontal vial. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m. Type 96
Length
40 cm
60 cm
80 cm
100 cm
Art. No. 15238/3 15239/0 15240/6 15241/3
120 cm
180 cm
200 cm
244 cm
—
—
—
—
96-2 Art. No. 15225/3 15226/0 15227/7 15228/4 15229/1 15230/7 15231/4 15232/1
Light metal rectangular profile with 2 gripping holes, removable end caps and 2 milled measuring surfaces (up to 120 cm), 2 vertical and 1 horizontal vial. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.029° = 0.5 mm/m. 183 cm
200 cm
Art. No. 15233/8 15234/5 15235/2 15236/9 15237/6
17209/1
Length
60 cm
80 cm
100 cm
120 cm
Also available as Type 96-2 with 2 vertical vials.
Type 96-2-M Light metal rectangular profile with removable end caps and 2 milled measuring surfaces (up to 120 cm), 2 vertical and 1 horizontal vial, 2 or 4 rare earth magnet systems depending on the length. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m. Length
40 cm
60 cm
80 cm
100 cm
120 cm
180 cm
200 cm
Magnets
2
2
2
2
2
4
4
Art. No. 15852/1 15853/8 15854/5 15855/2 15856/9 15857/6 15858/3
Rare earth magnets: 5 times stronger than normal ferrite magnets.
Because of its two milled measuring surfaces you can lay the 96-2-M in any position. “M” means magnets and, in fact, the super-powerful rare earth magnets. The 96-2-M therefore clings to steel like it was glued on.
STABILA spirit levels 56–57
Type 80 A electronic
Type 196-2 LED: Illuminated vials. • High-performance spirit level with two built-in LED light sources. • Intense, uniform illumination of both the horizontal and vertical vial. • Each vial can be individually switched on and off. • Robust lighting system suitable for use on building sites.
NEW Length
60 cm
Art. No. 17392/0
120 cm 17393/7
Strong light metal rectangular profile with ribs. 2 milled measuring surfaces. Finger grip opening: 1 at 60 cm, 2 at 120 cm. Removable end caps. 1 illuminated horizontal and 1 illuminated vertical vial. Additional second vertical vial. Measuring accuracy: in the normal position 0.029° = 0.5 mm/m, overhead measurement 0.029° = 0.5 mm/m.
Rapid battery replacement: battery replacement pack with 2 LED units – fast on-site battery change. Optional accessory (Art. No. 17450/7). Can also be used as a powerful mini torch/flashlight.
The audio angle guidance system makes working on your own fast, reliable and easy.
• 5 hours battery life. • Easy replacement of the button cells in the battery unit. • Easy to clean with a damp cloth.
Once you have worked with illuminated vials in darkness, twilight, dust or in your own light, you will never want to be without this spirit level.
vials. nated ty Illumimum clari Opti display. of
• The electronic spirit level that will fit in your tool-bag. • Audio angle guidance system with three different signals. You can align items without looking at the vial. • Easy to read digital display – automatically rotates for overhead measurements. • Reference angle mode: take an angular measurement, store it and transfer it to other components.
NEW Clearly visible front display. Audible inclination guide.
Length
30 cm
Art. No. 17323/4
Light metal rectangular profile. 1 horizontal vial. Vial measuring accuracy: in the normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m. Electronic inclination accuracy: at 0° and 90° = ± 0.05°, from 1° up to 89° = ± 0.2°. Available measuring units: angles, percent, mm/m and in/ft.
STABILA spirit levels 58–59
Type 196-2-M electronic
Type 196-2 electronic Very briefly, the three most important advantages: 1. Audible inclination guide with three different audio signals – you can align elements without looking at the vial. 2. Two digital displays. You can read the values from above and from the side. Available measuring units: angles, percent, mm/m and in/ft. 3. Reference angle mode: Take an angular measurement, store it and transfer it to another component.
Strong light alloy ribbed rectangular profile. 2 milled measuring surfaces, 1 horizontal vial and 2 vertical vials, 1 gripping hole. High-quality carrying case included. Measuring accuracy of the vials: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.029° = 0.5 mm/m. Electronic inclination accuracy: at 0° and 90° = ± 0.05°, from 1° to 89° = ± 0.2°. Length
60 cm
80 cm
100 cm
120 cm
180 cm
Strong light alloy ribbed rectangular profile. 2 milled measuring surfaces, 1 horizontal vial and 2 vertical vials, 2 rare earth magnet systems, 1 gripping hole. High-quality carrying case included. Measuring accuracy of the vials: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.029° = 0.5 mm/m. Electronic inclination accuracy: at 0° and 90° = ± 0.05°, from 1° up to 89° = ± 0.2°.
Art. No. 16384/6 16385/3 16386/0 16387/7 16467/6
Length
80 cm
Magnets
2
Art. No.
16780/6
Identical in construction to the electronic spirit level – but the rare earth magnets in the measuring surface are a definite plus. The innovation for everyone who has to align steel components. Audible inclination guide and two digital displays makes even very difficult work noticeably easier.
Rare earth magnets: Clearly visible front display. Audible inclination guide.
Second digital display: readable from above.
5 times stronger than normal ferrite magnets.
STABILA spirit levels 60–61
106 T / 106 TM: The extra-long range. The telescopic spirit levels of the Type 106 range are quite small for transport but quite large when used for work. They come in two different designs. Both are extremely sturdily constructed and the strong eccentric clamp ensures high measurement accuracy in all starting positions. The extremely strong two-chamber aluminium profile has two fingerhold openings for secure handling and easy transport. Both spirit levels have a length scale printed on for pre-setting the length of extension. The design has been patented.
Light metal rectangular profile with 1 horizontal and 2 vertical vials. Measurement accuracy: in normal position 0.029° = 0.5 mm/m. When extended in normal position 0.057° = 1.0 mm/m, overhead measurement (in closed position) 0.043° = 0.75 mm/m. Length 183–315 cm Art. No.
15076/1
Type 106 T
Type 106 TM
This has small plates underneath for bridging over irregularities: ideal for measurements on wood and masonry.
This has super-strong rare earth magnets instead of plates: your ideal measuring assistant in steel construction work.
Enormous holding force: the rare earth magnets on the Type 106 TM are 5 x stronger than conventional ferrite magnets. This provides a secure hold even under steel beams. Even when measuring overhead, components can be aligned without a problem.
Light metal rectangular profile with 2 vertical vials and 1 horizontal vial, with 7 rare earth magnet systems. Measurement accuracy: in normal position 0.029° = 0.5 mm/m. When extended in normal position 0.057° = 1.0 mm/m, overhead measurement (in closed position) 0.043° = 0.75 mm/m.
213–376 cm
Length
186–318 cm
15077/8
Magnets
7
216–379 cm 7
Art. No.
16462/1
16463/8
STABILA spirit levels 62–63
Special spirit levels • Transfer the installation points directly from the profile. The case is marked with all the normal installation dimensions. The marks for the drill holes for wash-basin supports and valves can be directly transferred from the datum line. Positions can be marked using the indentations. A centimetre scale starts from the centre of the profile top. • Six ring vial for marking 1 % and 2% slopes. • Continuous bridge over the horizontal vial. Guide-lines can be scribed in a single stroke. The axis and vial are always in view. • End caps with anti-slip stoppers at both ends. A secure grip in all positions. • Extra-strong rare earth magnets: simplify the alignment of pre-fabricated plumbing modules. Warning: May not comply with the country-specific installation standards.
View
Type 80 M Installation
Light metal rectangular profile with installation measurements, end caps with anti-slip stoppers on both sides, 1 horizontal vial and 1 vertical vial. Measurement accuracy: in normal position 0.029 = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m. Length
60 cm
100 cm
Art. No.
16881/0
16882/7
1
Front side
2
1
1
4
1
1
1
1
3 3
2
1
1
5 3
5
Plumber’s spirit level Type 80 M Installation: The spirit level which makes work easier for every plumber.
Measuring surface
All common installation measurements are printed on the profile: aligning, marking, drilling.
Only spirit levels with vials suitable for overhead measurement display reliable measurements in this position.
6
End caps
7
1
Notches for the transfer of marking points.
2
Printed, centimetre scale starting at the centre.
3
Printed with all common installation measurements. Identical with marking notches on the upper side.
4
Easy marking: Continuous bridge behind the horizontal vial.
5
Six ring vial for marking 1 % and 2 % slopes.
6
Extra strong rare earth magnets even adhere to small metal surfaces.
7
Patented anti-slip stoppers at both ends. STABILA special spirit levels 64–65
Worktop socket height: 1150 mm Switch height: 1050 mm Marking out plane (1 metre in height)
Light alloy rectangular profile with marking holes, end caps with anti-slip stoppers on both sides, 1 horizontal vial and 1 vertical vial. Measurement accuracy: in normal position 0.029 = 0.5 mm/m. Length
43 cm
120 cm
Socket height: 300 mm
1150 mm
Art. No. 16135/4 16136/1
91 mm 71 mm 71 mm 71 mm 71 mm 100 mm
71 mm 71 mm
1050 mm
Warning: May not comply with the country-specific installation standards.
Electrician’s spirit level Type 70 electric
300 mm
At last, a spirit level especially for electrical and installation work. The STABILA solution: Marking holes at standardised distances, with each hole located perfectly! Now you can measure and mark out horizontals or verticals and the distance between sockets or switches in a single operation. That demonstrably saves time and money. On the one hand, it saves on mental arithmetic and having to juggle with several measuring instruments – while, on the other hand, you save money on retouching the plaster. In accordance with DIN 49075, the distance for combinations of drill holes is 71 mm.
STABILA special spirit levels 66–67
Electrician’s spirit level Type 101 Pocket M • Electricians need it: the new switch spirit level for positioning flush-fitting switches and plugs. Extra-strong rare earth magnet. • Adjustments are now a thing of the past – thanks to the socket measuring surface: Place the Pocket M on the edge of the switch or plug insert. The extra-strong rare earth magnet automatically aligns the small spirit level with the insert.
Milled measuring surface (up to 120 cm) with 1 horizontal and 2 vertical vials. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.043° = 0.75 mm/m.
Length
80 cm
Base measuring surface. 1 horizontal vial. Measurement accuracy: in normal position ± 1 mm/m. Length
Width
Height
Art. No.
7 cm
2 cm
4 cm
16939/8
• Everyone needs it: instantaneous horizontal checks. Quality vial firmly cast into place. • The base measuring surface makes the Pocket M a useful spirit level and a constant companion.
100 cm
120 cm
Art. Nr. 16403/4 16404/1 16405/8
Bricklayer’s spirit level Type 96-2 K Patented impact protection: Correct discrepancies directly with light taps with the trowel. No tool replacement. The vertical vials in the centre make reading easy. The chamfered vial casing and the special coating are easy to clean.
Type 196-2 K Also 2 finger grip openings in expensive 2-component technology, for a safe, firm grip when working. Extraordinary adhesion: the extra-strong rare earth magnet of the Type 101 Pocket M is 5 times stronger than a normal ferrite magnet.
Quality in miniature. Firmly cast-in quality vial.
Milled measuring surface (up to 120 cm) with 1 horizontal and 2 vertical vials. Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.029° = 0.5 mm/m. Length
120 cm
Art. Nr. 16406/5
STABILA special spirit levels 68–69
Marking spirit level Type 70 MAS
Marking out the correct distances for the drill holes while holding the spirit level horizontally or vertically? No problem with STABILA’s marking spirit level. Use the sliding markers on the graduation scale to transfer and mark off the distances. Shelve, pictures and anything else that you have to hang can be fitted rapidly and securely.
Accessories
Light metal rectangular profile, electrostatically coated, with 2 plastic sliding markers and 2 printed centimetre scales. Measurement accuracy: in normal position 0.029° = 0.5 mm/m.
Length
80 cm
Art. No. 14111/0
2D-level Cross-shaped spirit level for aligning two horizontal levels simultaneously.
Hose spirit level 93 ZS 10 m / 93 ZS 20 m Highly unbreakable plastic cylinder with 130 mm printed scale and 10 mm plastic hose.
Carrying bags for spirit levels
Length Art. No.
Art. No. 07804/1
Length Art. No.
Verticals and horizontals
Marking out rows
Marking – drilling – hanging
String spirit levels For attaching to bridging strings.
93 ZS 10 m 93 ZS 20 m 13992/6
14302/2
120 cm
60 cm
80 cm
100 cm
16599/4 16598/7 16597/0 150 cm
180 cm
200 cm
16596/3 16595/6 16594/9 16593/2
Carpenters’ pencils Made from lime wood with an HB lead. Specially suitable for writing on wood, stone or concrete. 3 pencils per pack.
Length
240 mm
Art. No.
16991/6
Art. No. 40479/6
STABILA special spirit levels 70–71
74–75
Quality criteria for folding rules
76–78
Folding rules 900 series | 600 series | 600 N-S series
79
Rules and measuring tapes
Plastic folding rules 1000 series
80–81
Quality criteria for measuring tapes
82–83 84–85
Pocket tape measures Type BM 20 | Type BM 30 Type BM 30 W | Type BMT
86–88
Cased measuring tapes Type architect | Type 46 W | BM 50 series
89
Open-frame measuring tapes 42 series
STABILA rules 72–73
1
Materials and coating For wooden rules, the most important factor for optimum unbreakability is to use choice, well stored, highly elastic woods as the primary material. For plastic rules, glass fibrereinforced plastic provides the greatest durability. The coating on the wooden rules must be able to handle every adversity. They are protected against damp, sun and mechanical abrasion. This is the only way to ensure the scale’s good, long-term legibility.
Their quality is recognisable by:
3
Construction of a joint with a concealed rivet
High quality steel plate joint with side tongues
1 2 High-quality finish folding rule head STABILA has a long tradition of only using choice, high-quality beech as the base material for its wooden rules. This makes the rules especially hard-wearing.
The environmentallyfriendly lacquer to the company’s own formulation, provides unsurpassed weather and abrasion resistance.
3
The joints STABILA predominantly uses joints made from hardened spring steel, which ensure precise engagement and good spring action long-term. Catches and end cams provide strong retention, guaranteeing accuracy. Its special construction makes the joint operate smoothly over a long period. Highly durable glass fibre-reinforced polyamide joints are used on some models.
2
The printing A quality rule can be immediately recognised by the marking on its first section. Look for four important pointers: 1. the nominal length 2. the rule’s accuracy classification which is indicated in Roman numerals 3. EU type approval certification 4. the CE and metrology marks. And last but not least, the manufacturer’s name, in other words the
brand which confirms the rule’s origin and construction. The graduation scale, the most important feature, must be printed clearly and show an obvious distinction between units and tens. A double millimetre scale (on the upper and lower edge) increases the rule’s usefulness.
High quality steel jointing plates with built-in steel springs and concealed rivets.
Hardened steel jointing plates with built-in steel springs.
Hardened steel spring
Maintenancefree reinforced plastic jointing plates with flush rivets.
Beechwood strip
Steel plate joints with visible joint and open rivet.
STABILA rules 74–75
The approx. 2.8 mm thick beech sections are connected by sprung jointing plates. The ends are painted red. The black graduation scale with red tens is clearly and evenly printed. A particularly economical
Springs are built in under the highly durable jointing plate. The rivets are concealed. The sections are 3 mm thick and extremely weatherproof and wear-resistant. The ends are painted red. The black graduation scale with red tens is clearly and regularly printed. With the CE and metrology marks plus the EU type approval certification. Accuracy class III.
STABILA rule to accuracy class III. With the CE and metrology marks plus the EU type approval certification.
900 series folding rules Type
Length
Width
Sections
Colour
Gradation
Art. No.
917 907 907 N 1907
2m 2m 2m 2m
16 mm 16 mm 16 mm 16 mm
10 10 10 10
White/Yellow Yellow Natural White
cm/ mm cm/ mm cm/ mm cm/ mm
01624/1 01604/3 01614/2 01634/0
600 series folding rules Type
Length
Width
Sections
Colour
Gradation
Art. No.
617 617 W 617/11 607 1607 1607 607 N 601 601 N
2m 2m 3m 2m 2m 2m 2m 1m 1m
16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm
10 10 15 10 10 10 10 5 5
White/Yellow White/Yellow White/Yellow Light yellow White White Natural Light yellow Natural
cm /mm cm /mm cm /mm cm /mm cm /mm cm / inch cm /mm cm /mm cm / inch
01128/4 01124/6 01231/1 01104/8 01134/5 01133/8 01114/7 01204/5 01206/9
STABILA rules 76–77
The slim, elegant folding rule from the inventor of the folding rule. Thin highquality white beech slats, only 2.4 mm thick. Concealed rivets and hardened steel springs. The environmentally friendly dipped lacquer finish provides the scale with unsurpassed weather protection. With the CE and metrology marks plus the EU type approval certification.
600 N-S series folding rules Type
Length
Width
Sections
Colour
Gradation
Art. No.
607 N-S 607 N-S 607 N-S 601 N-S
2m 2m 2m 1m
16 mm 16 mm 16 mm 16 mm
10 10 12 6
Natural Natural Natural Natural
cm / mm cm / inch cm/ mm cm / mm
15785/2 15786/9 15787/6 15788/3
1000 series plastic folding rules Type
Length
Width
Sections
Colour
Gradation
Art. No.
1007 1004
2m 1m
16 mm 13 mm
10 10
White White
cm /mm cm /mm
01001/0 01004/1
The extremely durable joints with steel spring rollers can also be set at a right angle. The double millimetre scale is deeply impregnated. The tens are highlighted in red. When folded out the rule provides a
continuous straight edge so it can also be used as a ruler for marking out. Accuracy class III.
STABILA rules 78–79
The unique advantage of a measuring tape is that it can provide measurements up to 100m long in a compact form. There are different types of measuring tapes to suit different applications and different measurement distances. Pocket tape measures: Usable anywhere, small, light and easy to carry, on your belt or in your pocket, and ideal for measurements up to approx. 10 m. Cased measuring tapes: For measuring distances up to 30 m. Open-frame measuring tapes: For measuring distances up to 100 m, as commonly required in road construction and landscaping work.
All about measuring tapes
Particular features indicating the quality of the measuring tape are: 1. The accuracy. The following details are marked at the beginning of high-quality measuring tapes: nominal length, the CE and metrology mark, the accuracy class and the manufacturer’s brand. 2. The tape’s composition. • For pocket tape measures, the tape’s durability is an important factor: for this reason, most steel tapes are concave and have a resistant coating to protect the graduated scale from abrasion by particles of dirt. • Cased and open frame measuring tapes with steel or fibreglass tapes. Steel measuring tapes suffer from more significant changes in length, depending on the temperature but require less traction force for precise measurements than fibreglass tapes. The design and the material protect the steel tape against friction and breaking.
3. The tape end. Special end hooks for different applications: folding hook, plumblines, eyes, rings, etc., included in the measurement or not. A STABILA patent on pocket tape measures: the only hook that does not slip. A spikes hook whose little sapphire spikes enable it to hold on all by itself. Standard designs for the beginning of the tape: For cased measuring tapes, a pull ring. For open-frame measuring tapes, a particularly large pull-ring with notches for vertical measurement. Different tape beginnings available.
4. The casing. Different materials are used to provide protection and easy, long-term safe handling. For cased and open frame measuring tapes, this is usually ABS plastic but metal is also used for some individual casings and frames. The mechanical parts of open frame measuring tapes are made from steel, aluminium or high-quality plastic. On pocket tape measures, the gripping area is often covered with soft rubber.
5. Useful additional functions increase the measuring tape’s practicality: for instance, buffers on the tape mouth, a tape return brake, a blade lock and a variety of end hooks. Almost without exception, STABILA pocket tape measures have the patented spikes hook that prevents the hook from slipping on smooth surfaces.
STABILA measuring tapes 80–81
The patented STABILA hook: spikes on the inner surface hold it securely. Even when measuring longer lengths, someone else is not required to hold it. The material is protected by the buffer on the blade inlet. Beginning of blade reinforced from 5 m onwards. All metric versions of this type are also available calibrated for an additional charge.
Pocket tape measure Type BM 20 Unbreakable plastic casing. Curved, polyamide-coated white steel blade (with high abrasion resistance). Adjustable end hook. Automatic blade return. Stopper for braking and locking the blade. Beginning of blade reinforced (from 5 m onwards). Buffer on blade inlet. Cm and mm graduation. Red tens. With the CE and metrology marks plus the EU type approval certification. Accuracy class II. Belt clip.
Length 2m 3m 5m Width 13 mm 13 mm 19 mm Art. No. 16444/7 16445/4 16446/1
3 m / 10 ft 13 mm 16447/8
5 m /16 ft 19 mm 16448/5
Pocket tape measure Type BM 30 Unbreakable plastic casing. Curved, polyamide-coated yellow steel blade (with high abrasion resistance). Adjustable end hook with patented Spikes hook. Automatic blade return. Stopper for braking and locking the blade. Beginning of blade reinforced (from 5 m onwards). Buffer on blade inlet. Cm and mm graduation. Red tens. With the CE and metrology marks plus the EU type approval certification. Accuracy class II. Belt clip.
Length 2m 3m 5m 8m 3,5 m / 10 ft 5 m /16 ft 8 m /27 ft Width 13 mm 13 mm 19 mm 25 mm 13 mm 19 mm 25 mm Art. No. 16449/2 16450/8 16451/5 16452/2 16453/9 16454/6 16455/3 STABILA measuring tapes 82–83
Pocket tape measure Type BM 30 W Same as the Type BM 30 but with a window for reading internal measurements directly.
Pocket tape measure Type BMT
Unbreakable plastic casing with window for viewing internal measurements. Curved, polyamide-coated yellow steel blade (with high abrasion resistance). Adjustable end hook with patented Spikes hook. Automatic blade return. Stopper for braking and locking the blade. Buffer on blade inlet. Cm and mm graduation. Red tens. With the CE and metrology marks plus the EU type approval certification. Accuracy class II. Belt clip.
Length 3m 3 m/ 10 ft Width 16 mm 16 mm Art. No. 16456/0 16457/7
The latest generation of tape measures in extremely robust plastic with a rubber grip for secure handling and practicality every time you use it. Tape return brake integrated into the casing, next to the blade lock. The black end hook is a genuine STABILA spikes hook that cannot slip. A new type of coating on the yellow tape ensures the highest resistance to abrasion.
Unbreakable plastic casing with rubber grip cover. Curved, polyamide-coated yellow steel blade (with high abrasion resistance). Adjustable end hook with patented Spikes hook. Automatic blade return. Stopper for braking and locking the blade. Additional blade lock for fine tuning the blade return. Beginning of blade reinforced (from 5 m onwards). Rubber buffer on blade inlet. Cm and mm graduation. Red tens. With the CE and metrology marks plus the EU type approval certification. Accuracy class II. Belt clip.
Length 3m 5m 5m 8m 10 m 3 m /10 ft 5 m /16 ft 8 m /27 ft 10 m / 32 ft Width 16 mm 19 mm 25 mm 25 mm 30,2 mm 16 mm 19 mm 25 mm 30,2 mm Art. No. 14769/3 14770/9 15217/8 14771/6 14772/3 14774/7 14775/4 14776/1 14777/8 STABILA measuring tapes 84–85
Cased measuring tape architect’s Type
The smallest 15 m tape measure. The extremely durable light-weight polyamide casing is only 75 mm in diameter. With nickel-plated spring-loaded crank. A high quality measuring instrument with a touch of exclusivity.
Cased measuring tape Type 46 W
Essentially square casing with highly rounded edges and gripping ridges all round for a secure grip. Made from high-quality polyamide, providing extensive impact resistance. Ideal for heavyduty applications on building sites.
White-painted steel blade, cm and mm graduation, red tens. Extremely durable polyamide casing. Length 10 m 15 m Width 10 mm 10 mm Art. No. 03411/5 03413/9
White-painted steel measuring tapes (W), standard measurement scale for all steel measuring tapes: mm/– = full length gradation in mm, one side only. Length 10 m 20 m 30 m Width 10 mm 10 mm 10 mm Art. No. 04241/7 04243/1 04245/5
STABILA measuring tapes 86–87
The universal hook: • Special hook with a patented spike coating. Significantly improves non-slip properties. • New eyelet for quickrelease fixing - makes precise measurement even faster and simpler. The re-wind drum: • Optimal handling thanks to the retractable re-wind drum (patent applied for).
The casing: • Impact-resistant nylon casing. • Can be butted against a stop in all positions.
Cased measuring tape Type BM 50
Meets the new MID Directive applicable everywhere in Europe. With the CE and metrology marks as well as EU type approval certification.
Open-frame measuring tape Type 42 Fibreglass measuring tape (G), standard measurement scale for fibreglass tapes: cm/– = gradation in cm one side only, first metre in mm.
Fibreglass measuring tape (G), standard measurement scale for fibreglass tapes: cm/– = gradation in cm one side only, first metre in mm.
Polyamide-coated steel measuring tape (P); standard graduation scale for all steel tapes: mm/– = mm scale throughout on one side.
Length 10 m 20 m 30 m 50 m Width 13 mm 13 mm 13 mm 13 mm Art. No. 03141/1 03143/5 03145/9 03146/6
Polyamide-coated steel measuring tape (P), standard graduation scale for all steel tapes: mm/– = s mm scale throughout on one side.
The impact-resistant, unbreakable polyamide frame with reinforcement ribs on the inside is very robust. The grooved turning handle facilitates holding and tensioning the tape. The broad arm in well-proven Y design provides good tape guidance. Special plastic guides prevent the steel tape from catching between the rollers and the frame and protect it from wear. Large, robust draw ring with notches for plumbline measurements.
Length 10 m 20 m 30 m 50 m Width 13 mm 13 mm 13 mm 13 mm Art. No. 09291/7 09293/1 09295/5 09296/2
/2009 NEW 5
White-painted steel measuring tapes (W), standard measurement scale for all steel measuring tapes: mm/– = full length gradation in mm, one side only. Length 10 m 20 m 30 m Width 13 mm 13 mm 13 mm Art. No. (G) 17214/5 17215/2 17216/9 Art. No. (P) 17217/6 17218/3 17219/0 Art. No. (W) 17220/6 17221/3 17222/0
White-painted steel measuring tapes (W), standard measurement scale for all steel measuring tapes: mm/– = full length gradation in mm, one side only. Length 10 m 20 m 30 m 50 m 100 m Width 13 mm 13 mm 13 mm 13 mm 13 mm Art. No. 03771/0 03773/4 03775/8 03776/5 03777/2
STABILA measuring tapes 88–89
92
All about levelling boards, wedge shape darbies and feather edges
93 94
Levelling boards Type AL | Type AL 1L Type AL 2L | Type AL 2L-2G
95
Wedge shape darby Type TRK
95
Feather edge Type HAK
Levelling boards
STABILA levelling boards 90–91
All about levelling boards, wedge shape darbies and feather edges • Profiled shapes for producing finished surfaces are feather edges.
Levelling boards, wedge shape darbies and feather edges are simple but effective tools used as an aid in producing large, smooth surfaces. To ensure that these tools last and remain accurate for a long time, they are made from drawn aluminium profile. The distinction between the individual categories comes from their area of application, which dictates the shape of their cross-section.
• Profiles for skimming and levelling materials are wedge shape darbies.
It is much easier to work with levels if they are equipped with additional components. In the first place, this involves horizontal and vertical vials. To improve handling, a handhold is often integrated into the profile. For rapid and accurate results, these products are available in different lengths, giving you the opportunity to have the appropriate length of tool for your particular working surface.
Levelling board Type AL
The Type AL’s non-deforming, sturdy aluminium profile ensures good results when using levels.
Complete with light metal rectangular profile with plastic end caps. Profile cross-section: 18 x 100 mm. Length 1,0 m 1,2 m 1,5 m 1,8 m 2,0 m 2,5 m 3,0 m 4,0 m Art. No. 07815/7 07814/0 07805/8 07813/3 07801/0 07816/4 07806/5 07817/1
• Rectangular aluminium profiles for checking the evenness of a surface are levelling boards.
Levelling board Type AL 1L
Type AL: Type AL 1L: Installing window sills. Levelling uneven material.
As Type AL but with one horizontal vial. A level’s quality can be determined by the following characteristics:
1
2
2
2
3
In all cases, as with all tools, you should pay attention to the trademark. With a good brand, you can be sure that you have a good quality tool.
Complete with light metal rectangular profile with plastic end caps and 1 horizontal vial. Profile cross-section: 18 x 100 mm. Length 1,5 m 2,0 m 2,5 m 3,0 m Art. No. 07819/5 07807/2 07820/1 07800/3
1 The material | 2 The design | 3 The shape of the profile
STABILA levelling boards 92–93
As Type AL but with one horizontal and one vertical vial.
Levelling board Type AL 2L
Trapezoidal wedge shape darby with one gripping ridge in the profile. Ideal for producing clean results on site.
Complete with light metal rectangular profile with plastic end caps, 1 horizontal and 1 vertical vial. Profile cross-section: 18 x 100 mm. Length 1,0 m 1,5 m 1,8 m 2,0 m 2,5 m 3,0 m Art. No. 07821/8 07822/5 07823/2 07824/9 07825/6 07826/3
Wedge shape darby Type TRK
Complete with light metal trapezoidal profile with plastic end caps. Profile cross-section: 18 x 97 mm. Length 1,0 m 1,2 m 1,5 m 1,8 m 2,0 m Art. No. 07829/4 07830/0 07808/9 07831/7 07809/6
Type TRK: Smoothing rough plaster.
Type AL 2L-2G: Levelling out flooring material. Type AL 2L: Checking vertical edges.
Feather edge Type HAK
Levelling board Type AL 2L-2G
Complete with light metal rectangular profile with plastic end caps, 1 horizontal and 1 vertical vial and two handholds. Profile cross-section 18 x 100 mm. Length 2,0 m 2,5 m 3,0 m 4,0 m Art. No. 07802/7 07832/4 07803/4 07833/1
The Type HAK H profile produces a clean surface finish.
As Type AL but with one horizontal and one vertical vial and two handholds.
Complete with light metal H profile. Profile cross-section 27 x 112 mm. Length 1,0 m 1,2 m 1,5 m 1,8 m 2,0 m Art. No. 07827/0 07810/2 07811/9 07812/6 07828/7
Type HAK: Smoothing plaster surfaces.
STABILA levelling boards 94–95
GB 17476 03/09 40.000
www.stabila.de
All rights reserved to change the colour, technology and equipment.
STABILA Messger채te Gustav Ullrich GmbH Landauer Str. 45 76855 Annweiler, Germany 0049-(0)6346-309-0 0049-(0)6346-309-480 info@stabila.de