Hertz Product Catalogue

Page 1



INDEX .... ....... . ..... .... ... .... ...... . ..... .... .... .. .... 04 Energy.. .. ..... .... . .. . .. .... ..... .... .... .. .... . .... .. ...... 24 .. Mille... Hertz-Digital-Power.. .....10 Dieci.. .... .... .. ......... .... . ...... ... ....... .... ............ 32 .. Hi-Energy.. . .. .. .......... ..... .......... .... . . 14 SPL... . .. .. . ............ .... ...... .. .... ......... .... .... .. .... .. 36 .. Hertz-Energy.. ..... .... .... ........ ........ 20


1 TETOLON® DOME impedance, ensuring maximum power handling and Tetolon® Fiber dome features a hemispheric-hyperbolic frequency extension, even when listened to off axis. profile for maximum rigidity and linear frequency response beyond the audible range. 4 RENEWED CROSSOVER The highest quality components, the Rubber Touch 2 REN® NEODYMIUM MAGNET case, a passive cooling system and a three position In every component, the motor assembly is centred level control: these features make this crossover upon a REN® Neodymium ring, capable of operating in unique. high heat conditions. ML 280 tweeter is equipped with a double REN® Neodymium magnet. The use of a REN® 5 ALUMINIUM MAIN STRUCTURE Neodymium magnet generates extraordinary energy, The use of aluminium permits a perfect control, contrifor extremely high performance. buting to the reduction of unwanted resonances and residual vibrations. 3 ALUMINIUM VOICE COIL & COPPER RING The main structure and the rear acoustic chamber of The central pole piece is covered with a pure copper the tweeter are CNC machined from a solid aluminium sleeve. This combined with its CCAW double layer block. The basket is also made from anti-resonant voice coil wound on a Kapton® former provides a linear aluminium alloy.







MAXIMUM POWER, MAXIMUM QUALITY, MINIMUM SIZE Hertz Digital Power project delivers high power levels while maintaining high efficiency, in a compact footprint chassis size required in today’s modern installations. It has inherited all the technologies which made HP successful, with further advanced performance. More specifically, the D-Class technology has evolved into a Full Range design for offering stunning musical performance also with elevated power output.

10/11

www.hertzaudiovideo.com


1 MONITORING LEDs

4 LEDs monitor amplifier status and communicate with the user in real time. This system, while allowing the amplifier to operate, also identifies installation faults and leads to eliminate them. 3 OPTIMIZED HEATSINK

The heatsink boasts extremely efficient thermal conductivity, combined with exclusive cosmetics: scratch-resistant finish, end caps shaped for easy handling, control panel accessible from the top as well as a featured back lit Hertz logo which can also be rotated.

1

4

2

2 HDP ELECTRONICS

Power supply stage featuring toroidal transformers with multi-layered windings, powerful TO220 (for HDP 1) and T2205pin with dual inside device (for HDP 4 and HDP 5) Mosfets. 4 HDP IN & ARTTM

HDP IN system provides to interface with any OEM (through the Speaker In) and aftermarket (through the RCA In) sources. Using Speaker In inputs, the ARTTM (Automatic Remote Turn On-Off) function is available; the user can also switch it off.

3


HDP

HDP 1

MONO D-CLASS AMPLIFIER

12/13

1000 W

MAX POWER

HDP 4

FULL RANGE D-CLASS FOUR-CHANNEL AMPLIFIER

1000 W MAX POWER


AMP HDP 5

950 W

FULL RANGE D-CLASS FIVE-CHANNEL AMPLIFIER

MAX POWER

Technical specifications Channel Model Output Power (RMS) @ 14.4 VDC

S/N Ratio (A weighted)

RMS Output Power S/N Ratio

HDP 5

1

4-3-2

5-3

600 x 1

150 x 4 150 x 2 + 500 x 1 250 x 4 250 x 2 (2) + 500 x 1 (4)

70 x 4 + 380 x 1

@ 4Ω @ 4Ω @ 2Ω @ 2/4Ω @ 4/2Ω

/

Hz @ dB/Oct.

Bypass Hi-pass

Hz @ dB/Oct.

Lo-pass

40 ÷ 150 Hz @ 24

Hz @ dB/Oct.

Band-Pass

1000 x 1

Yes A: 50 ÷ 5k (2 range) @ 12 B: 80 ÷ 3.3k Hz @ 12 A: 50 ÷ 5k (2 range) @ 12 B: 80 ÷ 3.3k Hz @ 12

(Hi-pass) 18 ÷ 40 Hz @ 24 ok

100 x 4 + 550 x 1 200 x 2 + 550 x 1 A, B: Yes C: / A: 40 ÷ 150 Hz @ 12 B: 80 ÷ 3.3k Hz @ 12 C: 40 ÷ 150 Hz @ 24 A: 40 ÷ 150 Hz (HI) @ 12 80 ÷ 3.3k Hz (LO) @ 12

Hz @ dB/Oct.

Subsonic

(-50 ÷ 6) dB

Remote Sub Volume

%

100 Hz @ 4Ω

0.08

0.08

0.08

dBA

sensitivity @ 1 V RMS

103

100

A&B/C: 100/106

100 Hz @ 4Ω

100

50

A&B/C: 50/100

171 x 344 x 46.70 6.73” x 13.54” x 1.83”

171 x 284 x 46.70 6.73" x 11.18" x 1.83"

171 x 344 x 46.70 6.73” x 13.54” x 1.83”

600 x 1 83,5

120 x 4 80

60 x 4 + 310 x 1 60 W: 80 310 W: 84

Damping factor Size W x D x H

HDP 4

W x ch W x ch (Mono) W x ch W x ch W x ch

Filters

Distorsion - THD

HDP 1

mm inch

external

W x ch dBA

4Ω, ≤1% THD +N, 14.4 V Ref. 1 W Output

ok








1 DIE-CAST AND REFINED HEATSINK

Equipped with an optimized die-cast heatsink for enhanced thermal performance, HE amplifiers feature vertical fins besides the horizontal fins, used in the traditional extruded heatsink.

20/21


2

HE STATUS LOGO

This technology allows the user to visually monitor the status of the amplifier in real time. The logo lights up of a blue colour when the amplifier is working correctly, changing into an orange when it enters into protection status. 3

HE IN

To interface the HE line with both OEM (Speaker In) and aftermarket (RCA In). HE IN provides noise-free installation in any type of system design.

When HE IN is used, ART™, Automatic Remote TurnOn/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off. 4

HE ELECTRONICS

Underneath the heatsink, multiple winding transformers, high current 105° C Electrolytic capacitors and low RDS-ON mosfets are employed. HE 2 and HE 4 are equipped with SANKEN TO3P output transistors, while HE 1D features a Class D output stage based on solid TO247 power mosfets, also employed in the Synchro D-Class circuit.


HE 1D.1 MONO D-CLASS AMPLIFIER

22/23

900 W

MAX POWER

HE 2.1 STEREO AB-CLASS AMPLIFIER

400 W MAX POWER


HE 4.1

800 W

FOUR-CHANNEL AB-CLASS AMPLIFIER

MAX POWER

HE 1D.1

Technical specifications Channel Model Output Power (RMS) @ 14.4 VDC

Distorsion - THD S/N Ratio (A weighted)

Size W x D x H RMS Output Power S/N Ratio

1

2-1

4-3-2

70 x 2 200 x 1 100 x 2

70 x 4 200 x 2 100 x 4

15 ÷ 40Hz @ 24dB (mono) 0 ÷ 250Hz @ 24dB (mono) 0 ÷ +12dB @ 50Hz

Yes 40 ÷ 400Hz @12dB 40 ÷ 400Hz @12dB -

Yes A/B: 40 ÷ 400Hz @12dB A/B: 40 ÷ 400Hz @12dB -

0.04

0.06

104

104

150

150

266 x 289 x 63,5 10”1/2 x 11”3/8 x 2”1/2

266 x 289 x 63,5 10”1/2 x 11”3/8 x 2”1/2

267 x 393 x 63,5 10”9/16 x 15”1/2 x 2”1/2

150 x 1 60

55 x 2 82

55 x 4 82

@ 4Ω @ 4Ω @ 2Ω @ 1Ω @ 2/4Ω

Hz @ dB/Oct. Hz @ dB/Oct. Hz @ dB/Oct.

Bypass Hi-pass Lo-pass Subsonic

% %

1kHz @ 4Ω 100 Hz @ 4Ω

0.15

dBA

sensitivity @ 1 V RMS

100

Damping factor

1kHz @ 4Ω 100 Hz @ 4Ω mm inch

external

W x ch dBA

4Ω, ≤1% THD +N, 14.4 V Ref. 1 W Output

HE 4.1

200 x 1 320 x 1 450 x 1

W x ch W x ch (Mono) W x ch W x ch W x ch

Filters

HE 2.1

150

100 x 2 (2Ω) +200 x 1 (4Ω)


1 V-CONE速 The exponential profile gets very close to a perfect one, providing exceptional dispersion. 2 ULTRA FLAT Small size and shallow depth for installations without limits. 3 REN速 NEODYMIUM Small and powerful motor structure with copper-covered pole, for maximum linearity and energy.

24/25

4 RHFC速 TECHNOLOGY Provides the ability of orienting tweeter direction according to the listening point, for the benefit of the high frequencies. 5 NON-PRESSED PAPER CONE on the EV 165L, for the best energy trasfer at low end and mid frequencies.



26/27



28/29



ES F20.5 SUBWOOFER

400 W

ES F25.5 SUBWOOFER

500 W

ES F20.5

200 (8”)

400

200

4

32 ÷ 400

93

38 (1” 1/2)

ES F25.5

250 (10”)

500

250

4

30 ÷ 300

92

60 (2” 3/8)

30/31

High Density flux ferrite

12 (1/2”) 13 (1/2”)


EBX F20.5 REFLEX SUB BOX

EBX F25.5 REFLEX SUB BOX

400 W

600 W

ES F20.5 ES F25.5 EBX F20.5 EBX F25.5

Box Size

EBX F20.5

200 (8”)

250 (10")

400

200

4

40 - 400

90

520 x 108 x 320 20”1/2 x 4”1/4 x 12”5/8

EBX F25.5

250 (10”)

300 (12”)

600

300

4

38 - 350

92

670 x 119 x 403 26”3/8 x 4”11/16 x 15”7/8

EBX 200

200 (8”)

-

500

250

4

30 - 400

91

390 x 297 x 288 High density 15”3/8 x 11”11/16 x 11”5/16 flux ferrite

EBX 250

250 (10”)

-

700

350

4

28 - 300

93

465 x 340 x 338 18”5/16 x 13”1/16 x 13”5/16

EBX 300

300 (12”)

-

1000

500

4

25 - 250

94

545 x 331 x 400 21”7/16 x 13”1/16 x 15”3/4

Waterrepellent pressed paper


32/33



34/35


Box Size


36/37



38/39


%, 100 Hz @ 4立

external


40/41



42/43


90131106



Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.