Core Drill Kits
XPRESSCUT Pro Case Kit
CONTENTS: 5 x Clipacore core adaptors. 5 x Quick release clips. 1 x HEX extension bar with Clipacore drill adaptor. 1 x SDS extension bar with Clipacore drill adaptor. 1 x Clipacore knock out waste removal tool. 1 x A taper 12mm guide pin. 1 x A taper 12mm drill bit. 1 x Drift key. 5 x XPRESSCUT quick release premier Diamond core bits - 42mm / 52mm / 65mm / 117mm / 127mm.
QCXPP
Core Drill Bits
XPRESSCUT Core Drill Bits
Across the range of sizes sold separately, the core bits have spiralled and slotted barrels, helping remove debris and increasing air flow to the cutting edge. The high quality diamond and UK developed metal bond system provides trouble free cutting for most UK building materials.
Drill Sets
The Boss Drill
Manufactured from the highest quality using German engineering standards and components. The Boss cuts through bricks, concrete blocks and much more. Consistently delivering high cutting performances with safety constantly in mind. The unique quick release adaptor on the end of the drill allows for fast interchanging of core bits without the need for tools when used with Clipacore core adaptors. The quick release extension bar supplied with every drill ensures most wall depths can be fully penetrated with ease.
CONTENTS: Clipacore Quick Release Drill Adaptor designed for interchangeable core bits. Variable Handle Adjustment on Collar. Powerful 2 speed gear box, 1,000 RPM / 2,000 RPM. Electronic Soft Start Temperature Control and Current Cut-Off. Mechanical Safety Clutch. Available in 230v or 110v. Quick release extension bar (supplied).
Item No.
QCTBD110V
Core Sets
Item No.
QCTBD230V
Duocut
Our easy to use design enlarges existing holes to a wide variety of diameters for a wide variety of applications, including: Upgrading boiler flues. Upgrading gas pipes. Upgrading waste pipes / soil pipes. Upgrading extractor fans. Upgrading condense pipes. The inner spring-loaded core bit provides easy removal following the wall’s outer core scarring, ensuring perfectly symmetrical holes to one another. The larger outer core is quickly released from the drill / arbor adaptor (not supplied) by simply removing the Clipacore Clip.
Item No.
QCDC
Condensemate
Clipacore Condensemate puts you in control when upgrading from overflow pipe to 32mm waste pipe (or larger). The 300mm long core bit supplied, simply inserts into the existing open 22mm – 25mm hole (pipe fully removed). Once the outer core bit has scarred the wall, the inner long core bit serving as a guide can be removed by hand. Our easy to use design ensures consistent symmetrical holes eliminating the risk of core bits skidding off course and damaging the wall. The inner spring loaded core bit removes the need for tools thus improving workflow efficiency every time. The 22mm core bit can also be used on its own (with our smaller quick release core adaptor) to prevent blowing the brick face or render wall, compared to using a 22mm SDS masonry drill bit on hammer action.
Item No.
QCDCCON
Extension Kits
Chuckaway Extension Kit
Chuckaway removes the common problems associated with chuck headed core drills: Chucks seize up over time. Chucks require a chuck key which may get lost. HEX arbors are at risk of shearing off on the flats in chucks due to vibration and coming loose mid drilling. Chuckaway can also be used with the Chuckaway extension bar to penetrate deeper walls. No chuck or chuck key. Quick and safe. Maintenance free. Quick release clip system. High tensile steel built to last.
Item No.
QCCADAKIT
QCCADAM18
QCCADAM18KIT
Clipacore Hex Driver Extension
Standard drill chuck extension kit, QCHEX plus extension bar and core adaptor.
Item No.
QCHEXKIT
Fluemate
Safe to use when working at height. Scars the wall symmetrical to existing flue pipe and avoids skidding off course. Can be used with a variety of commonly used core bits. Spring loaded barrel for fast removal once wall is scarred. Fluemate comes with a 1/2” drill/arbor adaptor, DuoCut adaptor with clip, compression spring, 94mm barrel guide.
Item No.
QCFM
Clipacore SDS Driver Extension
SDS drill extension kit, QCSDS plus extension bar and core adaptor.
Item No.
QCSDSKIT
Adaptors
Chuckaway Drill Adaptor
Makita core drill adaptor for the Chuckaway system.
Item No.
QCCADA
Clipacore Core Adaptor
Fits onto your existing core bits or extension bars. Accepts A taper drill bits/guide pins. Interacts with all Clipacore drill adaptors and Chuckaway extension bars.
Item No. QCCA
Drill Adaptor
Fits onto your existing SDS, Hex arbors or extension bars.
Item No.
QCDA
Hex Adaptor
Slots into standard drill chuck.
Item No.
QCHEX
Chuckaway Extension Bar
Extension bar for Clipacore Chuckaway. Compatible for use with the Core Adaptor, SDS Driver, HEX Driver, 1/2” 20 UNF, M18 & 1/2” Drill Adaptor.
Item No.
QCCAEB
Power Tool Spares
A Taper Pilot Drill
Taps into core adaptor, centralises the core bit.
Item Number
QCDRILL12
A Taper Guide Pin
Taps into core adaptor, centralises the core bit.
Item Number
QCPIN12
Knock Out Tool
Knock out tool for easy waste removal.
Item No.
QCKOT
Clipacore SDS Drill Adaptor
Slots into SDS drill chuck.
Item No.
QCSDS
Clipacore Spare Clips
Pack of 5 spare clips.
Item No.
QCQRC