Metal and Sheet Metal Fabrication
http://protype2000.com/
Metal fabrication is the process of building structures made of metal using certain fabrication processes.
http://protype2000.com/
http://protype2000.com/
These processes are listed below –
By cutting the metal – this is achieved by sawing or shearing the metal By bending the metal – this is achieved by hammering or pounding the metal Finally by assembling the pieces – this is achieved by welding the metal structures created and fastening them http://protype2000.com/
Some applications of metal fabrication seen in our daily life are in the construction of machines and structures using raw materials such as plate metal, welding wires etc. Sheet metal fabrication is a process where the metal is hammered into sheets that vary from foils to plates depending on the thickness. Metal can be cut and bent into any desired shaped with the right http://protype2000.com/
Fabrication processes for sheet metal are listed below – By bending By curling By expanding By ironing etc. Some applications of sheet metal fabrication are found in airplane wings, car bodies, building roofs, etc using aluminum, brass, copper metals etc. http://protype2000.com/
“Thank You” http://protype2000.com/