Safety cages available for low ceilings.
shown in Brushed Nickel with metal blades and decorative guard
Damp Location: All Finishes with Metal Blades**
shown in Textured Bronze with wood blades
Acqua
Designed in 2008
shown in Polished Chrome with wood blades
The Acqua rotational ceiling fan is thoughtfully designed to resemble the molecular structure of water, Earth’s most precious resource. The Acqua offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angles of the motors to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both motor head position and fan blade speed. Matthews rotational fans circulate heat and air-conditioning more efficiently than traditional paddle fans. • Available in the following finishes: polished chrome, brushed nickel or textured bronze. • Constructed of cast aluminum and heavy stamped steel, Acqua carries a limited lifetime warranty. • The Acqua is available with the following blade options: • hand-balanced metal blades with decorative metal blade guards • hand-balanced metal blades with metal safety cages for low ceiling applications • hand-balanced solid wood blades without blade guards • The Acqua comes with this standard equipment: • 3-speed remote control • low voltage 50 watt MR-16 GU10 down light • vaulted ceiling canopy
MATT H E WS FAN COMPANY
Acqua
6" diameter
weight: 27 lbs voltage: 110*
2"
*Please contact us for possible 220 conversion
SKU Naming Convention AQ-XX-XXX (Model-Finish-Blade Type)
5”, 10", 20", 30", 48" or 72" field cuttable downrods available
Finishes Blade Type Brushed Nickel - BN Wood - WD Polished Chrome - CR Metal w/ Decorative Cage - MTL Textured Bronze - TB Metal w/ Safety Cage - MSAF
9" 16"
13"
5"
39" wood blades / 37" metal blades
ti o n a t o lR Angl Axia f o es o f F d an Heads s Spee to Suppor t Poles Increase Optimum Fan Head Position is 60° CFM: 4994 CFM: 6174 (Metal Blades) (Wood Blades)
Incr eas ing
The Acqua can be mounted with any one of the following downrod lengths: 5, 10, 20, 30, 48 or 72”. Safety cages available for low ceiling applications. **Damp location: All standard finishes with metal blades. Not recommended for salt water / ocean front applications.
1881 Industrial Drive
Libertyville, IL 60048
Tele: 847.680.9043
**Damp Location Fax: 847.680.8140
www.matthewsfanco.com
Summer 2013
The Acqua is compatible with flat or vaulted ceilings.
Diane
Designed in 2008
shown in Textured Bronze with wood blades
shown in Brushed Nickel with wood blades
Safety cages Safety cages available for for available low ceilings.
low ceilings.
shown in Polished Chrome with metal blades and decorative guard
Damp Damp Location: Location: All Finishes All withFinishes Metal Blades** with
Metal Blades
The Diane oscillating directional ceiling fan provides maximum, multi-directional airflow. The Diane can be hung in small, awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of any room.
· The Diane is available in the following finishes: polished chrome, brushed nickel or textured bronze. · Constructed of cast aluminum, and heavy stamped steel, the Diane carries a limited lifetime warranty. · The Diane is available with the following blade options: · hand-balanced metal blades with decorative metal blade guards · hand-balanced metal blades with metal safety cages for low ceiling applications · hand-balanced solid wood blades without blade guards · The Diane is equipped with a 3-speed remote control and vaulted ceiling canopy.
MATT H E WS FAN COMPANY
Diane
SKU Naming Convention DI-XX-XXX (Model-Finish-Blade Type)
weight: 12 lbs voltage: 110
Finishes Blade Type Brushed Nickel - BN Wood - WD Polished Chrome - CR Metal w/ Decorative Cage - MTL Textured Bronze - TB Metal w/ Safety Cage - MSAF
6" diameter
2"
5", 10", 20", 30”, 48” or 72" field cuttable downrods available
CFM: 3087
(Wood Blades)
CFM: 2497
(Metal Blades)
10"
12"
90˚ side-to-side oscillation
16"
13"
Summer 2013
The Diane can be mounted with any one of the following downrod lengths: 5, 10, 20, 30, 48 or 72”. The Diane is compatible with flat or vaulted ceilings. Safety cages available for low ceiling applications. **Damp location: All standard finishes with metal blades. Not recommended for salt water / ocean front applications.
1881 Industrial Drive
Libertyville, IL 60048
Tele: 847.680.9043
**Damp Location Fax: 847.680.8140
www.matthewsfanco.com
Melody
Designed in 2008
shown in Brushed Nickel with metal blades
shown in Polished Chrome with metal blades
Safety cage equipped shown in Textured Bronze with metal blades
Damp Location: All Finishes with Metal Blades.**
The Melody oscillating, 3-speed wall mounted fan provides maximum multi-directional airflow. It can be mounted in small, awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of any room.
· Available in the following finishes: polished chrome, brushed nickel or textured bronze. · Constructed of cast aluminum and heavy stamped steel, the Melody carries a limited lifetime warranty. · Equipped with hand-balanced metal blades and metal safety cages. · 3-speed wall control is standard equipment. · To operate the oscillation mechanism independent of the fan blades, a three wire system is needed.
M ATT H E WS FAN COMPANY
13 "
2.5"
CFM: 2497 (Metal Blades)
The motor angle and projection can be customized by a simple alteration to the field-cuttable gooseneck. 5.5"
20"
90Ëš left to right oscillation
Melody weight: 14 lbs voltage: 110*
*Please contact us for possible 220 conversion
SKU Naming Convention ME-XX (Model-Finish) Finishes Brushed Nickel - BN Polished Chrome - CR Textured Bronze - TB
**Damp location: All standard finishes with metal blades. Not recommended for salt water / ocean front applications. **Damp Location 1881 Industrial Drive
Libertyville, IL 60048
Tele: 847.680.9043
Fax: 847.680.8140
Summer 2013
20"
www.matthewsfanco.com
Cinni
Designed in 2011
shown in textured bronze
shown in brushed nickel
Safety cage equipped Damp Location: All Finishes with Metal Blades.**
shown in polished chrome
The über-cool Cinni oscillating, 3-speed table fan provides stylish multi-directional airflow. • Available in the following finishes: polished chrome, brushed nickel or textured bronze. • Constructed of cast aluminum and heavy stamped steel, the Cinni carries a limited lifetime warranty. • Equipped with hand-balanced metal blades and metal safety cages.
M ATT H E WS FAN COMPANY
13"
90Ëš oscillation left - right
18"
CFM: 2497 (Metal Blades)
Cinni
3-speed fan motor control
weight: 14 lbs voltage: 110
"On - Off " oscillation control
SKU Naming Convention CI-XX
9"
(Model-Finish) Finishes
14"
Brushed Nickel - BN Polished Chrome - CR Textured Bronze - TB
**Damp Location 1881 Industrial Drive
Libertyville, IL 60048
Tele: 847.680.9043
Fax: 847.680.8140
Spring 2013
**Damp location: All standard finishes with metal blades. Not recommended for salt water / ocean front applications.
www.matthewsfanco.com
Damp Location: All Finishes**
shown in Textured Bronze
shown in Polished Chrome
Irene-3
Designed in 2013
shown in Brushed Nickel
Cutting a figure like no other, the Irene-3 is rustic, yet strikingly modern. Irene-3 is inspired by the golden age of aviation with three neatly joined propeller-shaped, solid walnutstained wooden blades. A spherical motor housing complements its minimal profile. Irene-3 is streamline while still appearing warm and natural. • • • • • •
52” diameter with three solid wood, walnut-stained machine-cut blades. Energy efficient six speed, reversible DC motor with new, reliable technology. Damp location finishes: brushed nickel, polished chrome or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Standard equipment: • One downrod of 5”, 10”, 20” or 30”. (48” and 72” downrods are also available.) • Vaulted ceiling mount canopy up to 29 degrees. Option for greater slant available. • Remote control, hand-held and wall mountable.
M ATT H E WS FAN COMPANY
Irene-3 weight: 17 lbs voltage: 110* *Please contact us for possible 220 conversion
6" diameter
2"
SKU Naming Convention IR3-XX (Model-Finish) Finishes Brushed Nickel Polished Chrome Textured Bronze
5", 10", 20", 30", 48" or 72" downrods available
- BN - CR - TB
7" 9"
52 "
The Irene-3 is compatible with flat or vaulted ceilings and can be mounted with any one of the following downrod lengths: 5”, 10”, 20”, 30”, 48” and 72”.
**Damp location: All standard finishes Not recommended for salt water / ocean front applications 1881 Industrial Drive
Libertyville, IL 60048
Tele: 847.680.9043
Fax: 847.680.8140
www.matthewsfanco.com
Summer 2013
The Irene-3 is compatible with vaulted ceilings mount canopy up to 29 degrees. Option for greater slant available.
Damp Location: All Finishes** shown in Brushed Nickel
shown in Polished Chrome
Irene-5
Designed in 2012
shown in Textured Bronze
Cutting a figure like no other, the Irene-5 is rustic, yet strikingly modern. Irene-5 is inspired by the golden age of aviation with five neatly joined propeller-shaped, solid walnut-stained wooden blades. A spherical motor housing complements its minimal profile. Irene-5 is streamline while still appearing warm and natural. • • • • • •
52” diameter with five solid wood, walnut-stained machine-cut blades. Energy efficient six speed, reversible DC motor with new, reliable technology. Damp location finishes: brushed nickel, polished chrome or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Standard equipment: • One downrod of 5”, 10”, 20” or 30”. (48” and 72” downrods are also available.) • Vaulted ceiling mount canopy up to 29 degrees. Option for greater slant available. • Remote control, hand-held and wall mountable.
M ATT H E WS FAN COMPANY
Irene-5
6" diameter
weight: 18 lbs voltage: 110* *Please contact us for possible 220 conversion
2"
SKU Naming Convention IR5-XX (Model-Finish)
5", 10", 20", 30", 48" or 72" downrods available
Finishes Brushed Nickel Polished Chrome Textured Bronze
- BN - CR - TB
6" 9"
52 "
The Irene-5 is compatible with flat or vaulted ceilings and can be mounted with any one of the following downrod lengths: 5”, 10”, 20”, 30”, 48” and 72”.
**Damp location: All standard finishes Not recommended for salt water / ocean front applications 1881 Industrial Drive
Libertyville, IL 60048
Tele: 847.680.9043
Fax: 847.680.8140
www.matthewsfanco.com
Summer 2013
The Irene-5 is compatible with vaulted ceilings mount canopy up to 29 degrees. Option for greater slant available.
Kaye
Designed in 2012
shown as wall fan in Polished Chrome
shown as ceiling fan in Brushed Nickel
Safety cage equipped
shown as wall fan in Textured Bronze
Damp Location: All Finishes with Metal Blades.**
The beautiful Kaye oscillating, 3-speed wall or ceiling fan, reminiscent of train cabin ventilators of yesteryear, will cool down your favorite space with poise and determination. Kaye’s profile is low, however its strength and character define it. • Kaye can be mounted in small or awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of a room. • Available in the following finishes: polished chrome, brushed nickel or textured bronze. • Constructed of cast aluminum and heavy stamped steel, the Kaye carries a limited lifetime warranty. • Equipped with hand-balanced metal blades and metal safety cages. • 3-speed wall control is standard equipment. • To operate the oscillation mechanism independent of the fan blades, a three wire system is needed.
M ATT H E WS FAN COMPANY
Kaye weight: 10.5 lbs voltage: 110 17.5"
5.5" diameter
4.5" 13" 13"
SKU Naming Convention KC-XX (Model-Finish) Finishes Brushed Nickel Polished Chrome Textured Bronze
90ยบ Left to Right Oscillation
- BN - CR - TB
**Damp location: All standard finishes with metal blades. Not recommended for salt water / ocean front applications. **Damp Location 1881 Industrial Drive
Libertyville, IL 60048
Tele: 847.680.9043
Fax: 847.680.8140
Summer 2013
CFM: 2497 (Metal Blades)
www.matthewsfanco.com