Exclusive NanoAlloy Wear Plate
CastoDur Diamond Plate 395 NanoPlate ®
• Unique NanoAlloy® structure for unmatched abrasion and erosion resistance • Wears like tungsten carbide at a fraction of the cost • Easily formed and fabricated for custom component manufacturing • A wide range of custom products for every industrial application
DESCRIPTION:
WELDING INFORMATION:
395 NanoPlate is the newest CastoDur Diamond Plate® (CDP®) developed using the latest in cored wire technology. 395 NanoPlate is part of a new generation of wearfacing products based on the science and engineering of ultrafine, submicron grain structures. Weld deposits have a high volume fraction of ultra-hard borocarbides distributed in a mesomorphous* iron-alloy matrix. A transformation phase relating to, or existing in, a state of matter typically intermediate between a liquid and a crystal phase i.e. not fully crystalline or fully amorphous.
395 NanoPlate premium wear plates are easily welded using Eutectic alloys:
395 NanoPlate employs advanced weld deposits that present a crystalline microstructure with nano-size crystals and high hardness carbides evenly spread throughout the matrix.
SMAW (Electrode) Low and Medium carbon steels; high strength, low alloy steels.
XHD® 66 electrode
Alloy steels; manganese steels; hardened steels.
XHD® 6868 680CGS (3/32” dia. (2.4mm))
Attachment weld may be overlayed with NanoAlloy XHD 6395 to protect against abrasive wear.
The most important characteristic of 395 NanoPlate is that it provides high hardness within a ductile matrix resistant to moderate impact.
GMAW (Wire)
395 NanoPlate premium wear plate is manufactured in 4’ x 9’ sheets that can be cut, formed, or rolled to desired shapes. 395 NanoPlate is easily bolted or welded into place. For custom fabrication, please contact Eutectic Technical Services.
Low and Medium carbon steels; high strength, low alloy steels.
EnDOtec® DO*66 or TeroMatec® OA 2020
Alloy steels; manganese steels; hardened steels.
EnDOtec® DO*68S or TeroMatec® OA 3205
TECHNICAL DATA: Overall Thickness
Base
Overlay
Approx. Wt. per sq/ft
3/8”(10mm)
6mm
4mm
16 lb.
1/2”(13mm)
8mm
5mm
21 lb.
3/4”(19mm)
12mm
7mm
31 lb.
STANDARD SIZE: 48” (aprox. 122 cm) x 108” ( approx. 274 cm) (4’ x 9’)
OVERLAY PROPERTIES:
Continuous electrodes
Continuous electrodes
Attachment weld may be overlayed with NanoAlloy 395N to protect against abrasive wear.
APPLICATIONS: • Fans • Mixers • Scrapers • Blades • Pipes and elbows
Typical Hardness 1st Pass: 68-70 HRC Typical Hardness 2nd Pass: 69-71 HRC Temperature Limit: 1,400°F (760°C) Carbide Type: Complex borocarbide matrix of sub-micron, near-nano scale microstructure Overall Wear Plate Density: 0.284 lb/in³ ASTM G65 Wear Test Results: 12mm³
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutectic.com
Eutectic Services 12300 Carmen Avenue Milwaukee, WI 53225 USA P 800-558-8524 • F 262-255-5542
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. 395 1-15 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.