Industrial solutions for surface protection against wear and corrosion
NEW BTC DENSIFIED THERMAL SPRAY COATING RANGE
Enduring Performance...
Stronger, with Castolin Eutectic Thermal resistance up to 1500°C Thin coatings (0.3 to 0.7 mm) High corrosion resistance with or without erosion Substrate not thermally affected. No deformation. No regulatory restrictions Large, complex surface areas possible to coat Easy to apply either on site or in workshop
BTC SOLUTIONS
When corrosion is severe or in combination with abrasion or erosion
Our new BTC densified thermal spray coatings include a range of solutions based on the arc wire spray and densification technologies developed in house. Castolin Eutectic, as the producer of coating equipments, cored wires and densifiers, has fully optimised the process parameters. Arc Spray process ●● Substrate not thermally affected ●● Excellent mechanical bonding
Current Wire
●● High efficiency process
Coating Arc Air
●● Extremely competitive coating costs
Spray
stream
Wire
●● Large, complex surface areas
Current
Densification ●● Chemical reaction with the alloy that creates an exceptional
barrier against corrosion ●● Densifier range withstanding temperatures up to 1500°C ●● Important improvement of the metallic coating performances
Material selection ●● The BTC solution is chosen to resist against the specific
conditions of the corrosive and/or erosive environment ●● Wide range of alloys: • Nickel based alloys such as Inconel 625 and 686,
Hastelloy, Incoloy, etc. • Cobalt based alloys • Special iron based alloys
Implementation ●● Our specialists will analyse your wear/corrosion problems and
propose a tailored solution ●● BTC coating technology is only available through our CastoLab
Services© workshops
For additional information France : Mr. Didier Mattiuzzi +33 60 887 6921 Worldwide : Mr. Alain Tremblay +41 79 686 6107
Your resources for protection, repair and joining solutions www.castolin.com
www.eutectic.com
Stronger with Castolin Eutectic www.castolin.com www.eutectic.com