®
ABRATEC XHD
Typical Applications
XHD 6710 • XHD 6715 • XHD 6395N
Bucket protected with XHD 6710
Fan edge protection
Asphalt transportation screw
Augers
Mining Buckets
Harfaced Sinter Crusher Bars
“THE BEST SOLUTION for your abrasion wear problems”
Foundry Sand Slinger
Waste Cutting Knife
Hardfaced Hammers
How to Order PRODUCT
AVAILABLE DIAMETERS
XHD 6710
1/8”
5/32”
XHD 6715
1/8”
5/32”
XHD 6395N
3/16”
1/4”
3/16”
5/32”
Packaging: available in 11 lb., hermetically sealed, boxes Contact: phone 800-558-8524 or email marketing@eutecticusa.com
Eutectic’s Line of Xuper High Deposition Electrodes • Specially formulated to combat all types of abrasion and erosion • Microstructure designed to achieve superior wear performance • High carbide and boride content for the best wear resistance • High deposition efficiency reduces downtime and increases productivity
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutectic.com
CastoLab Services Workshop 12300 Carmen Avenue Milwaukee, WI 53022 USA P 800-558-8524 • F 262-255-5542
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. XHD 10-13 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.
The Benefits of the XHD Technology Lower dilution as compared to conventional electrodes
Optimized microstructure Ductile, carbide-gripping austenitic matrix results in uniform wear resistance.
Hardness properties and wear resistance achieved on the first pass. Standard
Conventional hardfacing electrode with high dilution
XHD 6710
XHD 6715
XHD 6395N
Single pass of XHD 6710
Weld metal properties Microstructure of the deposit is extremely important when choosing the best hardfacing electrode. Wear-resistance is also influenced by the degree of deposit chemistry, cooling rate and dilution.
High deposition
Higher deposition rate (lb/h) means increased productivity.
VOLUME LOSS - mm3
Abrasion resistance
High efficiency
ASTM G-65 ABRASION TEST 33 30
40% Stronger
27 24 21 18 15 12 9 6 3 0
Conventional Solution
XHD 6710
74% Stronger
50% Stronger
XHD 6715
XHD 6395N
30% more efficient than standard electrodes achieves less waste and increased cost savings
Up to 74% more wear resistant! Product
Hardness
Volume Loss
XHD 6710
63-65 HRC
20 mm3
XHD 6715
64-66 HRC
16 mm3
XHD 6395N
68-70 HRC
9 mm3
PERFORMANCE
Extended life XHD 6710 XHD 6715 XHD 6395N
Availability of Equipment
Maintenance Costs
USE OF XHD SOLUTIONS
Stronger, with Eutectic
Stronger, with Eutectic
www.eutectic.com
www.eutectic.com
Reduced maintenance means increased availability of critical equipment and longer component life.
The Benefits of the XHD Technology Lower dilution as compared to conventional electrodes
Optimized microstructure Ductile, carbide-gripping austenitic matrix results in uniform wear resistance.
Hardness properties and wear resistance achieved on the first pass. Standard
Conventional hardfacing electrode with high dilution
XHD 6710
XHD 6715
XHD 6395N
Single pass of XHD 6710
Weld metal properties Microstructure of the deposit is extremely important when choosing the best hardfacing electrode. Wear-resistance is also influenced by the degree of deposit chemistry, cooling rate and dilution.
High deposition
Higher deposition rate (lb/h) means increased productivity.
VOLUME LOSS - mm3
Abrasion resistance
High efficiency 30% more efficient than standard electrodes achieves less waste and increased cost savings
ASTM G-65 ABRASION TEST 33 30
40% Stronger
27 24 21 18 15 12 9 6 3 0
Conventional Solution
XHD 6710
74% Stronger
50% Stronger
XHD 6715
XHD 6395N
Up to 74% more wear resistant! Product
Hardness
Volume Loss
XHD 6710
63-65 HRC
20 mm3
XHD 6715
64-66 HRC
16 mm3
XHD 6395N
68-70 HRC
9 mm3
PERFORMANCE
Extended life XHD 6710 XHD 6715 XHD 6395N
Availability of Equipment
Maintenance Costs
USE OF XHD SOLUTIONS
Stronger, with Eutectic
Stronger, with Eutectic
www.eutectic.com
www.eutectic.com
Reduced maintenance means increased availability of critical equipment and longer component life.
®
ABRATEC XHD
Typical Applications
XHD 6710 • XHD 6715 • XHD 6395N
Bucket protected with XHD 6710
Fan edge protection
Asphalt transportation screw
Augers
Mining Buckets
Harfaced Sinter Crusher Bars
“THE BEST SOLUTION for your abrasion wear problems”
Foundry Sand Slinger
Waste Cutting Knife
Hardfaced Hammers
How to Order PRODUCT
AVAILABLE DIAMETERS
XHD 6710
1/8”
5/32”
XHD 6715
1/8”
5/32”
XHD 6395N
3/16”
1/4”
3/16”
5/32”
Packaging: available in 11 lb., hermetically sealed, boxes Contact: phone 800-558-8524 or email marketing@eutecticusa.com
Eutectic’s Line of Xuper High Deposition Electrodes • Specially formulated to combat all types of abrasion and erosion • Microstructure designed to achieve superior wear performance • High carbide and boride content for the best wear resistance • High deposition efficiency reduces downtime and increases productivity
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutectic.com
CastoLab Services Workshop 12300 Carmen Avenue Milwaukee, WI 53022 USA P 800-558-8524 • F 262-255-5542
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. XHD 10-13 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.