Universal Metal Preparation Electrode
ExoTrode
®
WELDING • May be used as both a cutting and chamfering electrode • For use with both AC or DC power sources • Exothermic coating concentrates the arc force without over heating • Quick strike and re-strike properties • Ideal for in-plant or in the field
DESCRIPTION:
WELDING PARAMETERS:
Exotrode is specially designed to prepare welding surfaces by chamfering, gouging, cutting and piercing, can be used on all metals and is ideal for diffi cult-to-get to locations. Use AC or DC power sources. No supplementary gas, compressed air or special electrode holder required.
• With DC, use straight polarity.
TECHNICAL DATA:
• To chamfer and gouge: Point electrode in direction of travel use at an angle of not more than 30° with the plane of the work. Strike an arc. Push electrode along, quickly for a shallow chamfer, more slowly or with a weaving motion for a deeper gouge.
Polarity: AC or DCEN (-)
• To cut: Hold electrode at 45° angle and strike an arc. Push and pull.
Recommended Amperages
• To pierce: Hold electrode vertically and strike.
Diameter
Amperage
3/32” (2.4mm)
150-190
1/8” (3.2mm)
230-310
5/32” (4.0mm)
280-380
3/16” (4.6mm)
300-500
TYPICAL APPLICATIONS: ExoTrode may be used on all types of metals
WARNING Protect yourself and others. Read and understand this warning. THIS PRODUCT CONTAINS CHROMIUM AND/OR NICKEL which are listed by OSHA, NTP, or IARC as being a carcinogen or potential carcinogen. Use of this product may expose you or others to fumes and gases at levels exceeding those established by the American Conference of Governmental Industrial Hygienists (ACGIH) or the Occupational Safety and Health Administration (OSHA). READ AND COMPLY WITH THE OSHA PERMISSIBLE EXPOSURE LIMITS FOR HEXAVALENT CHROMIUM (CrVi), Fed. Reg. 71-10099. MANGANESE & RELATED COMPOUNDS SUCH AS MANGANESE DIOXIDE: Overexposure to manganese and its compounds may cause metal fume fever characterized by chills, fever, upset stomach, vomiting, irritation of the throat and aching of the body. Excessive overexposure may affect the central nervous system. Symptoms may include muscular weak ness and tremors. Behavioral changes and changes in handwriting may also appear. Workers exposed to manganese and its compounds should receive quarterly medical examinations of early detection of manganese poisoning. FUMES AND GASES can be dangerous to your health. Certain medical studies have suggested that NERVOUS SYSTEM and/or LUNG DAMAGE can result from exposure to welding fumes and gases through the use of some electrodes. ARC RAYS can injure eyes and burn skin. ELECTRIC SHOCK can kill. • Before use, read and understand the Material Safety Data Sheets (MSDS), the manufacturer’s instructions, and follow your employer’s safety practices • Keep your head out of the fumes. • Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and the general area. Respirators may be needed and should be chosen by the employer based on workplace conditions and contaminant levels. For information regarding a respiratory protection program, see OSHA 1910.134 requirements. • Wear correct eye, ear, and body protection. • Do not touch live electrical parts. • In case of medical emergency, call for medical aid. •See American National Standard Z49.1, Safety in Welding and Cutting, published by the American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33135; and OSHA Safety and Health Standards, 29CFR 1910, available from the U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954. WARNING: This product contains or produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code Section 25249.5 et seq.)
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutecticusa.com
Eutectic Canada 428, rue Aime Vincent Vaudreuil-Dorion, Quebec J7V 5V5 Phone: (800) 361-9439 Fax: (514) 695-8793 www.eutectic-na.com
Eutectic Mexico KM 36.5 Autopista Mexico-Quertaro 54730 Cautitlan-Izcalli Estado de Mexico, Mexico Phone: 011 (52) 55-5872-1111 e-mail: eutectic.mexico@eutectic.com.mx
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. 04-25-11© 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.