Wear Management Solutions
Your One Stop Shop - Eutectic Corporation & CastoLab Services
Protective Coatings for Industrial Fans and Housings
• Broadest product and process range in the industry • Worldwide manufacturing to high quality standards • Recommendations based on a deep understanding of applied metallurgy • Field proven procedures • CastoLab Services workshops provide a reliable, cost effective solution
Research and Development
Manufacturing facility
CDP® and CastoTube production
Wide product range
Global Application Data Base Eutectic is a global company sharing in a worldwide database of applications called TeroLink. TeroLink is shared with over 50 offices and workshops spanning across seven continents. To date, Eutectic Castolin has well over 8,000 successfuly documented industrial applications. No problem is too big or too small, contact us today to learn how we can solve your critical abrasion, corrosion and impact wear problems.
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutectic.com
CastoLab Services Workshop 12300 Carmen Avenue Milwaukee, WI 53022 USA P 800-558-8524 • F 262-255-5542
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. FAN 5-14 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.
PLATE
• Erosion • Abrasion • Cavitation • Corrosion • Impact • High Temperature
PTA WELDED
18X 1
112
FUSED
Extend Service Life with CDP® XuperWave® Wear Plate
18X 1
395N
Lightweight plate with hard nickel alloy matrix and tungsten carbide particles.
18X 1
212
FUSED
Critical equipment, that’s subjected to extreme conditions, needs the best hardfacing solution!
22X 2
Lightweight plate with hard nickel/ iron alloy matrix and tungsten carbide particles.
13X 1
4666
WELDED
Localized abrasion on blade section
65% tungsten carbide on a hard nickel alloy matrix.
6503
Complex carbides and borides. High-temperature.
10X 1
4624
WELDED
Extreme erosion on blades
EXTENDED SERVICE LIFE
Worn-out blade
DESCRIPTION
Chromium carbide.
NanoAlloy® nano size ultra hard phases.
ALLOY
• Ideal for parts exposed to fine particles at high velocity • Maximum protection against linear erosive wear • Prevents fine particle tracking at points most susceptible to wear such as the stress cracks and weld bead overlap
Straight Str St aigh aig i ht Bead
G65*
HARDNESS (HRC)
10 mm3
61-65
7mm (5/16”)
12 mm3
68-71
10mm (3/8”)
12 mm3
58-61
6mm (1/4”)
12 mm3
58-60
6mm (1/4”)
17 mm3
61-64
23 mm3
58-61
TOTAL PLATE THICKNESS**
Higher Wear Resistance Compared to AR 400
Do These Pictures Look Familiar?
Worn-out impeller
TYPE
Common Enemies of Valuable Fans & Housings
4X
10mm (3/8”)
10mm (3/8”)
13mm (1/2”)
19mm (3/4”)
13mm (1/2”)
19mm (3/4”)
13mm (1/2”)
19mm (3/4”)
DESCRIPTION
BTC Thermal spray protective coatings applied using proprietary processes. Solutions tailored to protect Solutions against combinations of abrasion, erosion and corrosion, even at high temperatures.
Lower Wear Resistance Compared to AR 400
• Reduces wear by up to 30% over conventional weld bead pattern
Workshop Case Study
• Smooth, flat bead profile for easy balancing and overall increased fan performance
Fans - Steel and Iron Works
XuperWave Be Bead ad d
8mm (5/16”)
9mm (3/8”)
WEAR PROBLEM: Iron and steel works fans suffer from extreme erosive wear caused by fine oxide particles in the steel making process.
XuperWave Weld Quality Plates produced with multiple torch heads, will have an uneven surface, illustrated below. Eutectic XuperWave is made using a single torch which produces flat, even weld beads across the entire plate. This welding process is cooler which minimizes distortion and dilution and maintains the maximum in wear resistant properties of the alloy. Also, smooth, flat plate is critical to balance and optimal air flow which ensures the best possible wear resistance and overall fan performance.
PREVIOUS SOLUTION: Fabricate impeller blades of a steel baghouse fan from basic chromium carbide (CrC) plate in 1/4” + 1/4” thickness. The fan lasted 12 months in service. EUTECTIC SOLUTION: To increase service life, Eutectic recommended fabricating the blades from CDP 4666 XuperWave complex carbide plate in 1/2” total thickness. RESULTS: Eutectic solution is still in service ater 2 years, with minimal wear!
Competitor solution lasted just 12 months (left), while CDP blades (right) are still in service after 2 years.
20 18 16 14 12 10 8 6 4 2
Conventional wear plates exhibit uneven welds
XuperWave welds remain smooth and even
Stronger, with Eutectic www.eutectic.com
0
Stronger, with Castolin Eutectic Stronger, with Eutectic www.eutectic.com
2
PLATE
• Erosion • Abrasion • Cavitation • Corrosion • Impact • High Temperature
PTA WELDED
18X 1
112
FUSED
Extend Service Life with CDP® XuperWave® Wear Plate
18X 1
395N
Lightweight plate with hard nickel alloy matrix and tungsten carbide particles.
18X 1
212
FUSED
Critical equipment, that’s subjected to extreme conditions, needs the best hardfacing solution!
22X 2
Lightweight plate with hard nickel/ iron alloy matrix and tungsten carbide particles.
13X 1
4666
WELDED
Localized abrasion on blade section
65% tungsten carbide on a hard nickel alloy matrix.
6503
Complex carbides and borides. High-temperature.
10X 1
4624
WELDED
Extreme erosion on blades
EXTENDED SERVICE LIFE
Worn-out blade
DESCRIPTION
Chromium carbide.
NanoAlloy® nano size ultra hard phases.
ALLOY
• Ideal for parts exposed to fine particles at high velocity • Maximum protection against linear erosive wear • Prevents fine particle tracking at points most susceptible to wear such as the stress cracks and weld bead overlap
Straight Str St aigh aig i ht Bead
G65*
HARDNESS (HRC)
10 mm3
61-65
7mm (5/16”)
12 mm3
68-71
10mm (3/8”)
12 mm3
58-61
6mm (1/4”)
12 mm3
58-60
6mm (1/4”)
17 mm3
61-64
23 mm3
58-61
TOTAL PLATE THICKNESS**
Higher Wear Resistance Compared to AR 400
Do These Pictures Look Familiar?
Worn-out impeller
TYPE
Common Enemies of Valuable Fans & Housings
4X
10mm (3/8”)
10mm (3/8”)
13mm (1/2”)
19mm (3/4”)
13mm (1/2”)
19mm (3/4”)
13mm (1/2”)
19mm (3/4”)
DESCRIPTION
BTC Thermal spray protective coatings applied using proprietary processes. Solutions tailored to protect Solutions against combinations of abrasion, erosion and corrosion, even at high temperatures.
Lower Wear Resistance Compared to AR 400
• Reduces wear by up to 30% over conventional weld bead pattern
Workshop Case Study
• Smooth, flat bead profile for easy balancing and overall increased fan performance
Fans - Steel and Iron Works
XuperWave Be Bead ad d
8mm (5/16”)
9mm (3/8”)
WEAR PROBLEM: Iron and steel works fans suffer from extreme erosive wear caused by fine oxide particles in the steel making process.
XuperWave Weld Quality Plates produced with multiple torch heads, will have an uneven surface, illustrated below. Eutectic XuperWave is made using a single torch which produces flat, even weld beads across the entire plate. This welding process is cooler which minimizes distortion and dilution and maintains the maximum in wear resistant properties of the alloy. Also, smooth, flat plate is critical to balance and optimal air flow which ensures the best possible wear resistance and overall fan performance.
PREVIOUS SOLUTION: Fabricate impeller blades of a steel baghouse fan from basic chromium carbide (CrC) plate in 1/4” + 1/4” thickness. The fan lasted 12 months in service. EUTECTIC SOLUTION: To increase service life, Eutectic recommended fabricating the blades from CDP 4666 XuperWave complex carbide plate in 1/2” total thickness. RESULTS: Eutectic solution is still in service ater 2 years, with minimal wear!
Competitor solution lasted just 12 months (left), while CDP blades (right) are still in service after 2 years.
20 18 16 14 12 10 8 6 4 2
Conventional wear plates exhibit uneven welds
XuperWave welds remain smooth and even
Stronger, with Eutectic www.eutectic.com
0
Stronger, with Castolin Eutectic Stronger, with Eutectic www.eutectic.com
2
Wear Management Solutions
Your One Stop Shop - Eutectic Corporation & CastoLab Services
Protective Coatings for Industrial Fans and Housings
• Broadest product and process range in the industry • Worldwide manufacturing to high quality standards • Recommendations based on a deep understanding of applied metallurgy • Field proven procedures • CastoLab Services workshops provide a reliable, cost effective solution
Research and Development
Manufacturing facility
CDP® and CastoTube production
Wide product range
Global Application Data Base Eutectic is a global company sharing in a worldwide database of applications called TeroLink. TeroLink is shared with over 50 offices and workshops spanning across seven continents. To date, Eutectic Castolin has well over 8,000 successfuly documented industrial applications. No problem is too big or too small, contact us today to learn how we can solve your critical abrasion, corrosion and impact wear problems.
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutectic.com
CastoLab Services Workshop 12300 Carmen Avenue Milwaukee, WI 53022 USA P 800-558-8524 • F 262-255-5542
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. FAN 5-14 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.