Flux Coated, Nickel-Silver, Low Fuming Brazing Rod ®
Xuper 16 XFC
BRAZING • No prepatory fluxing required • Excellent replacement for expensive silver brazing alloys • Easily machinable • Excellent corrosion resistance • Joins base metals at lower temperatures than gas or arc welding • Minimizes thermal stress and distortion with less cracking • High strength fillets
DESCRIPTION:
WELDING PARAMETERS:
Xuper 16 XFC is a nickel - containing flexible flux coated bronze brazing rod, commonly called nickel silver. 16 XFC is pre-flux coated with the correct amount of flux so there is no preparatory fluxing required.
Preparation: The base metal surfaces to be brazed must be clean and free of all dirt, oil, grease and oxides such as rust.
Xuper 16 XFC is an excellent replacement for high cost silver brazing alloys when higher brazing temperatures are acceptable. 16 XFC is a blue colored flexible flux coated brazing rod. Available in 18” lenghts in 1/8’’ diameter 11 lb. packs and 3/32” diameter 11 lb. packs.
Finishing: All the corrosive flux residue must be removed after brazing. Rinse with water while the parts are still warm, or rinse with hot water.
TYPICAL APPLICATIONS: For brazing tungsten carbide, stainless steel, carbon steels, nickel alloys, and cast iron. Building-up overlaying worn parts such as gear teeth, bearings and valve seats. Suitable for tubular structures.
TECHNICAL DATA: Tensile Strength: Elongation, in2 in.: Brinell Hardness: Solidus: Liquidus: Brazing Range: Specific Gravity: Density (lb/cu in): . Elec. Conductivity: Elec. Resistivity: Color, as Brazed: For Joint Clear.:
70,000 psi, average 25% 120 1665°F (907°C) 1680°F (916°C) 1720°F-1800°F (938°C - 982°C) 8.47 302 5.5 % IACS 31.4 Microhm-cm Blue .001 to .005 inches
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutecticusa.com
Eutectic Canada 428, rue Aime Vincent Vaudreuil-Dorion, Quebec J7V 5V5 Phone: (800) 361-9439 Fax: (514) 695-8793 www.eutectic-na.com
Eutectic Mexico KM 36.5 Autopista Mexico-Quertaro 54730 Cautitlan-Izcalli Estado de Mexico, Mexico Phone: 011 (52) 55-5872-1111 e-mail: eutectic@eutectic.com.mx
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. 16XFC-03-07-12© 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.