Superior Aluminum Brazing Flux
XuperBraze 190FP ®
BRAZING • Highly Improved flux-blend consistency • Longer-fluxing activity cycles for better braze flowability! • A higher oxide-dissolving capacity for a cleaner, porosity-free braze! • Easy to remove residue for quick post brazing cleaning! • Available in either paste form, for both hand-held and automatic dispensable flux brazing, or dry, for special application needs! • Manufactured to have the optimum viscosity for the widest range of application methods!
PRODUCT DESCRIPTION
PROCESSES
Xuper Braze190 FP the new standard in dispensable aluminum brazing fluxes for the highly active brazing of aluminum alloys in the 1000 and 3000 series including the more difficult alloys such as 5052 and 6061-T6. This product can be applied to the joint area both manually and with automated dispensing equipment.
• Gas-Air (Torch/Burner) • Convection/Radiation • Air Furnace • Controlled Atmosphere
190 FP provides excellent filler metal flow with the conventional BAISi brazing alloys and great capillary action. The joint appearance after brazing and the ease of flux residue removal are just further advantages of using Xuper Braze 190 FP.
TECHNICAL DATA
Xuper Braze 190 FP provides excellent capillary action and uniform flow on almost any aluminum. (5052-H32 shown)
Form: White Creamy Paste Active Temperature Range: 915° - 1350° F Specifications: AMS 3412D, AWS A5.31 type FB1-A Filler Metals: BAlSi - 2,3,4,5 & Alcoa 719 Residues: Completely water soluble
APPLICATIONS • Receiver Dryer • Accumulators • Aluminum Fittings • Aluminum Tube to Block Assemblies • OEM Aluminum Brazing • Aluminum Boats
Xuper Braze 190 FP provides exceptional wetting action on 6061-T6 aluminum.
HEALTH AND SAFETY: Observe normal brazing and welding practices, respiratory protection and proper air flow pattern advised. For general welding and brazing practices, see AWS publications Z49.1 “Safety in Welding and Cutting and Allied Process”. Welding and brazing are completely safe processes when performed in accordance with proper safety measures. Become familiar with local safety regulations before beginning welding or brazing operations. DO NOT operate brazing or welding equipment or use brazing and welding materials before you have thoroughly read the proper instruction manual(s). Please refer to the Eutectic internet site for Material Safety Data Sheet (MSDS) information. DISREGARDING THESE INSTRUCTIONS, AND/OR THE INSTRUCTIONS OF BRAZING EQUIPMENT OR MATERIAL MANUALS, MAY BE HAZARDOUS TO YOUR HEALTH. YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutectic.com
Eutectic Services 12300 Carmen Avenue Milwaukee, WI 53225 USA P 800-558-8524 • F 262-255-5542
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. 190FP 9-15 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.