GLASS PULL by VETROGLASS HARDWARE

All measurements are approximate www.vetroglass.com

Commercial Door Pulls

FASCINO Series

“MEIA” HEAVY DUTY DOOR PULL 1-15/16” / 50mm

9-13/16” / 250mm

1-9/16” / 40mm

3/16” / 5mm

- Made of 304 grade Stainless Steel GLASS FABRICATION - Requires two 9/16” (14mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick

(A) Size

(B) Size

9-13/16” / 250mm

11-13/16” /300mm JK07011D

Set

“DISCO” HEAVY DUTY DOOR PULL - Made of 304 grade Stainless Steel GLASS FABRICATION - Requires two 5/16” (8mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick

15/16” 25mm

1-15/16” / 50mm

1-15/16” 50mm

Set

3-15/16” (100mm)

JK00165D

1-15/16” / 50mm

“PALETE” HEAVY DUTY DOOR PULL - Made of 304 grade Stainless Steel GLASS FABRICATION - Requires two 5/16” (8mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick

15/16” / 25mm 2-3/16” 56mm

3/16” 5mm

(A) Size

(

) Size

3-15/16” (100mm)

5-7/8” (150mm)

Set JK07500D

All measurements are approximate www.vetroglass.com

Commercial Door Pulls

FASCINO Series

“COURO” DOOR PULL - Made of 304 grade Stainless Steel / Black GLASS FABRICATION - Requires two 5/8” (16mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick A

2-5/8” 66mm

(A) Size

(B) Size

Set

9-13/16” / 250mm

11-13/16” / 300mm

JK07185D

1-2/16” Ø30mm

“MITRA” DOOR PULL

- Made of Titanium - Finish: Black, Gold, Copper GLASS FABRICATION - Requires two 5/16” (8mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick

(A) Size

1-15/16” 50mm

13/16” 20mm

(B) Size

Set

11-13/16” (300mm) 13-1/16” (332mm)

JK07002DTB

11-13/16” (300mm) 13-1/16” (332mm)

JK07002DTG

11-13/16” (300mm) 13-1/16” (332mm)

JK07002DTCO

2-1/16” 53mm

12-5/8” / 320mm

11-13/16” / 300 mm

“FINO” DOOR PULL

11/16” 18mm

GLASS FABRICATION - Requires two 3/8” (9.5mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick

Finish

Material

Set

Satin

Stainless Steel

JK07432D

Black

Titanium

JK07432DTB

3/8” 10mm

All measurements are approximate www.vetroglass.com

Pocket Door Handle

POCKET Series - Made of 304 grade Stainless Steel GLASS FABRICATION - Inlay; glass cutting required FOR USE - Tempered glass 3/8” or 1/2” (10 or 12mm) thick

Ø 3-15/16” / 100mm

Ø3-11/16” / 94mm

“CUPOLA” POCKET DOOR HANDLE

1/16” 2mm

1-7/8” / 48.5mm

(A) Glass thickness

Code

3/8” / 10mm

W3250-10

1/2” / 12mm

W3250-12

“OVALE” POCKET DOOR HANDLE 3-1/8” / 79mm

2-3/8” / 61mm

3-9/16” / 91mm

9/16” 15mm

1/16” 2mm

- Made of 304 grade Stainless Steel GLASS FABRICATION - Inlay; glass cutting required FOR USE - Tempered glass 3/8” or 1/2” (10 or 12mm) thick (A) Glass thickness

Code

3/8” / 10mm

W5250-10

1/2” / 12mm

W5250-12

“BELLISSIMA” POCKET DOOR HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Inlay; glass cutting required FOR USE - Tempered glass 3/8” or 1/2” (10 or 12mm) thick

3-15/16” / 100mm 1-15/16” / 50mm

2-15/16” / 74mm

2-3/8” / 60mm

1/8” / 3mm

(A) Glass thickness

Code

3/8” / 10mm

W4252C-10

1/2” / 12mm

W4252C-12

“MODERNO” POCKET DOOR HANDLE R10º

- Made of 304 grade Stainless Steel GLASS FABRICATION - Inlay; glass cutting required FOR USE - Tempered glass 3/8” or 1/2” (10 or 12mm) thick

R10º

3-1/8” / 80mm

108º

3-15/16” / 100mm

72º

1/8” 3mm

(A) Glass thickness

Code

3/8” / 10mm

W5251-10

1/2” / 12mm

W5251-12

2-3/16” / 56mm

Glass cutting sheet available on web page All measurements are approximate www.vetroglass.com

Commercial Door Pulls

L20 Series

DOOR PULL L20 - Ladder Pull - Made of 1-1/4” (31.75mm) 304 grade Stainless Steel tubing - Supplied with (2) SOLID 304 Stainless Steel mid post - Also available in Polished Stainless Steel and Black GLASS FABRICATION - Requires two 5/8” (16mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick D

3-1/4” / 81.75mm

1-1/4” / 31.75mm

1” / 25.4mm

Glass cut sheet

1-15/16” / 50mm A

Set

5/8” (16mm)

Int / Ext

Size

Interior

Exterior

Set

(A) - 12” / 305mm (B) - 24” / 610mm

L2012X24SS-IN

L2012X24SS-EXT

L2012X24SS

(A) - 18” / 457mm (B) - 30” / 762mm

L2018X30SS-IN

L2018X30SS-EXT

L2018X30SS

(A) - 24” / 610mm (B) - 36” / 914mm

L2024X36SS-IN

L2024X36SS-EXT

L2024X36SS

(A) - 30” / 762mm (B) - 42” / 1067mm

L2030X42SS-IN

L2030X42SS-EXT

L2030X42SS

(A) - 36” / 914mm (B) - 48” / 1219mm

L2036X48SS-IN

L2036X48SS-EXT

L2036X48SS

(A) - 42” / 1067mm (B) - 54” / 1372mm

L2042X54SS-IN

L2042X54SS-EXT

L2042X54SS

(A) - 48” / 1219mm (B) - 60” / 1524mm

L2048X60SS-IN

L2048X60SS-EXT

L2048X60SS

(A) - 54” / 1372mm (B) - 66” / 1676mm

L2054X66SS-IN

L2054X66SS-EXT

L2054X66SS

(A) - 60” / 1524mm (B) - 72” / 1829mm

L2060X72SS-IN

L2060X72SS-EXT

L2060X72SS

(A) - 66” / 1676mm (B) - 78” / 1982mm

L2066X78SS-IN

L2066X78SS-EXT

L2066X78SS

(A) - 72” / 1829mm (B) - 84” / 2134mm

L2072X84SS-IN

L2072X84SS-EXT

L2072X84SS

Custom sizes and finishes Available

All measurements are approximate www.vetroglass.com

Commercial Door Pulls

L27 Series

DOOR PULL L27 D

- Offset Ladder Pull - Supplied with (2) SOLID 304 Stainless Steel mid post - Made of 1-1/4” (31.75mm) 304 grade Stainless Steel tubing - Also available in Polished Stainless Steel and Black GLASS FABRICATION - Requires two 5/8” (16mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick C

3-1/4” / 81.75mm 1-1/4” / 31.75mm

1” / 25.4mm

Set

1-15/16” / 50mm 155º A

5/8” (16mm)

Glass cut sheet

Int / Ext

Size

Interior

Exterior

Set

(A) - 12” / 305mm (B) - 24” / 610mm

L2712X24SS-IN

L2712X24SS-EXT

L2712X24SS

(A) - 18” / 457mm (B) - 30” / 762mm

L2718X30SS-IN

L2718X30SS-EXT

L2718X30SS

(A) - 24” / 610mm (B) - 36” / 914mm

L2724X36SS-IN

L2724X36SS-EXT

L2724X36SS

(A) - 30” / 762mm (B) - 42” / 1067mm

L2730X42SS-IN

L2730X42SS-EXT

L2730X42SS

(A) - 36” / 914mm (B) - 48” / 1219mm

L2736X48SS-IN

L2736X48SS-EXT

L2736X48SS

(A) - 42” / 1067mm (B) - 54” / 1372mm

L2742X54SS-IN

L2742X54SS-EXT

L2742X54SS

(A) - 48” / 1219mm (B) - 60” / 1524mm

L2748X60SS-IN

L2748X60SS-EXT

L2748X60SS

(A) - 54” / 1372mm (B) - 66” / 1676mm

L2754X66SS-IN

L2754X66SS-EXT

L2754X66SS

(A) - 60” / 1524mm (B) - 72” / 1829mm

L2760X72SS-IN

L2760X72SS-EXT

L2760X72SS

(A) - 66” / 1676mm (B) - 78” / 1982mm

L2766X78SS-IN

L2766X78SS-EXT

L2766X78SS

(A) - 72” / 1829mm (B) - 84” / 2134mm

L2772X84SS-IN

L2772X84SS-EXT

L2772X84SS

Custom sizes and finishes Available

All measurements are approximate www.vetroglass.com

Commercial Door Pulls

L42 Series

DOOR PULL L42 D

- Mounted Offset Ladder Pull - Made of 1-1/4” (31.75mm) 304 grade Stainless Steel tubing - Includes (2) Stainless Steel hollow mid-posts - Also available in Polished Stainless Steel and Black GLASS FABRICATION - Requires two 5/8” (16mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick C

4-1/2” / 114.25mm

1-1/4” / 31.75mm

1” / 25.4mm

3-1/4” / 82.50mm 135º

Set

5/8” (16mm)

Glass cut sheet

Int / Ext

Size

Exterior

Interior

Set

(A) - 12” / 305mm (B) - 24” / 610mm

L4212X24SS-IN

L4212X24SS-EXT

L4212X24SS

(A) - 24” / 610mm (B) - 36” / 914mm

L4224X36SS-IN

L4224X36SS-EXT

L4224X36SS

(A) - 36” / 914mm (B) - 48” / 1219mm

L4236X48SS-IN

L4236X48SS-EXT

L4236X48SS

(A) - 48” / 1219mm (B) - 60” / 1524mm

L4248X60SS-IN

L4248X60SS-EXT

L4248X60SS

(A) - 60” / 1524mm (B) - 72” / 1829mm

L4260X72SS-IN

L4260X72SS-EXT

L4260X72SS

Interior

Exterior

(A) - 19” / 500mm (B) - 31” / 800mm

CHCP042-500SS

(A) - 31” / 800mm (B) - 47” / 1200mm

CHCP042-800SS

Size

Set

Custom sizes and finishes Available All measurements are approximate www.vetroglass.com

All measurements are approximate www.vetroglass.com

Commercial Door Pulls

L40 Series

DOOR PULL L40 - Square Ladder Pull - Made of 1-1/4” (31.75mm) 304 grade Stainless Steel square tubing - Includes (2) Stainless Steel hollow mid-posts - Also available in Polished Stainless Steel and Black GLASS FABRICATION - Requires two 5/8” (16mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick C

3-1/4” / 81.75mm 1-1/4” / 31.75mm

1” / 25.4mm

F Glass cut sheet

3-1/8” / 50mm A

Set

5/8” (16mm)

Int / Ext Size

Exterior

Interior

Set

(A) - 12” / 305mm (B) - 24” / 610mm

L4012X24SS-IN

L4012X24SS-EXT

L4012X24SS

(A) - 24” / 610mm (B) - 36” / 914mm

L4024X36SS-IN

L4024X36SS-EXT

L4024X36SS

(A) - 36” / 914mm (B) - 48” / 1219mm

L4036X48SS-IN

L4036X48SS-EXT

L4036X48SS

(A) - 48” / 1219mm (B) - 60” / 1524mm

L4048X60SS-IN

L4048X60SS-EXT

L4048X60SS

(A) - 60” / 1524mm (B) - 72” / 1829mm

L4060X72SS-IN

L4060X72SS-EXT

L4060X72SS

Custom sizes and finishes Available All measurements are approximate www.vetroglass.com

Commercial Door Pulls

L30 Series

DOOR PULL L30 B C

- “C” Rounded Corner Pull - Made of 304 grade Stainless Steel GLASS FABRICATION - Requires two 3/8” (10mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick

3/8” (10mm)

Glass cut sheet

Size

Set

(A) - 19” / 500mm

1-9/16” (40mm)

13/16” (20mm)

CHCP030-500SSS

(A) - 31” / 800mm

1-9/16” (40mm)

13/16” (20mm)

CHCP030-800SSS

All measurements are approximate www.vetroglass.com

Commercial Door Pulls SOLID

W810 Series

DOOR PULL W8105 1/2” (12mm)

B 3-1/2” (80mm)

- “C” Solid Rounded Corner Pull - Made of 304 grade Solid Stainless Steel - Single-side (Exterior) GLASS FABRICATION - Requires two 5/16” (8mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick - Screws Included 5/16” (8mm)

Glass cut sheet

A 1” (25.4mm)

Screws M6

(A) Size

Code

1” Half Round

6” (152mm)

W8105-6

1” Half Round

8” (203mm)

W8105-8

1” Half Round

10” (254mm)

W8105-10

SOLID

DOOR PULL W8103HD Ø 1” (25.4m)

- “C” Solid tubular rounded corner pull - Made of 304 grade Solid Stainless Steel - Single-side (Exterior) GLASS FABRICATION - Requires two 7/16” (11mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick - Screws Included

B 3-1/2” (80mm)

7/16” (11mm)

Glass cut sheet

Screws M8

(A) Size

Code

1” (25mm)

8” (203mm)

W8103HD-8

1” (25mm)

10” (254mm)

W8103HD-10

1” (25mm)

12” (304mm)

W8103HD-12

1” (25mm)

33” (838mm)

W8103HD-33

All measurements are approximate www.vetroglass.com

Commercial Door Pulls SOLID

W819 Series

DOOR PULL W8190HD - Offset Commercial Solid Pull - Made of 304 grade Solid Stainless Steel - Single-side (Exterior) GLASS FABRICATION - Requires two 7/16” (11mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick - Screws Included

Ø 1” (25.4mm) B 3-1/2” (80mm)

7/16” (11mm)

Glass cut sheet

Screws M8

(A) Size

Code

1” (25mm)

8” (203mm)

W8190HD-8

1” (25mm)

10” (254mm)

W8190HD-10

1” (25mm)

12” (304mm)

W8190HD-12

All measurements are approximate www.vetroglass.com

Commercial Door Pulls

L31 Series

DOOR PULL L31

- Mitered door pull - Satin Stainless Steel Finish - Made of 1-1/4” (31.75mm) 304 grade Stainless Steel tubing - Also available in Polished Stainless Steel and Black GLASS FABRICATION - Requires two 5/8” (16mm) diameter holes FOR USE - Tempered glass 3/8” to 3/4” (10 to 19mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick C

3-1/4” / 80mm

Set

D Glass cut sheet

Int / Ext

5/8” (16mm)

1-1/4” / 31.75mm

Interior

Exterior

Set

L3112SS-IN

L3112SS-EXT

L3112SS

(A) 24” / 610mm (B) 25-1/4” / 641mm

L3124SS-IN

L3124SS-EXT

L3124SS

(A) 36” / 914mm (B) 37-1/4” / 945mm

L3136SS-IN

L3136SS-EXT

L3136SS

(A) 48” / 1219mm (B) 49-1/4” / 1250mm

L3148SS-IN

L3148SS-EXT

L3148SS

(A) 60” / 1524mm (B) 61-1/4” / 1555mm

L3160SS-IN

L3160SS-EXT

L3160SS

Size

Interior

Exterior

Set

Size (A) 12” / 305mm (B) 13-1/4” / 336mm

(A) 17” / 450mm (B) 18-1/4” /481mm

CHCP012-450SSS

Custom sizes and finishes Available All measurements are approximate www.vetroglass.com

Commercial Door Pulls D

DOOR PULL L201 - Ladder Pull with lock - Made of 1-3/8” (35mm) 304 grade Stainless Steel tubing - Security Keys GLASS FABRICATION - Requires two diameter holes 5/8” (16mm) and 7/8” (22mm) FOR USE - Tempered glass 3/8” to 1/2” (10 to 12mm) thick

B A

Cilynder High Security

H J K

3-3/16” / 81mm

1-3/8” / 35mm

5/16” / 8mm

1/2” / 13mm

15/16” / 24mm

1-13/16” / 46mm

2-15/16” / 75mm

1-1/4” / 31mm

Incluided Bolt Sleeve

7/8” / 22.4mm

7/8” (22mm)

A1 7/8” (22mm)

7/8” / 22.4mm

Glass cut sheet

Included 5 Security Keys

B G

Door Bolt

A 5/8” (16mm)

5/8” (16mm)

5/8” / 16.3mm

5/8” (16mm)

1-3/4” / 44mm

L201 Series

Code

CHCP201-1200

CHCP201-1800 CHCP201-2000 CHCP201-2400

J C

Size

( I ) Size

Code

7-7/8” / 200mm

CHCP201-1200

2-15/16” / 75mm

CHCP201-1800

(A) - 36-7/16” / 925mm (A1) - 36-7/16” / 925mm (B) - 78-3/4” / 2000mm

2-15/16” / 75mm

CHCP201-2000

(A) - 44-5/16” / 1125mm (A1) - 44-5/16” / 1125mm (B) - 94-1/2” / 2400mm

2-15/16” / 75mm

CHCP201-2400

(A) - 36-7/16” / 925mm (B) - 47-1/4” / 1200mm (A) - 36-7/16” / 925mm (A1) - 28-9/16” / 725mm (B) - 70-7/8” / 1800mm

All measurements are approximate www.vetroglass.com

Self Adhesive Sliding Handles

GLU Series

“INCRESPATO” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass 5mm

10mm

(A) Size

(B) Size

Set

4” (100mm)

1-5/8” (90mm)

G01-100

8” (200mm)

1-5/8” (90mm)

G01-200

30mm

“FESSURA” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass 5mm

10mm 30mm

(A) Size

(B) Size

Set

4” (100mm)

2-3/8” (60mm)

G02-100

8” (200mm)

2-3/8” (60mm)

G02-200

12” (300mm)

2-3/8” (60mm)

G02-300

“RETTANGOLARE” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass 5mm

10mm

(A) Size

(B) Size

Set

4” (100mm)

1-5/8” (40mm)

G03-100

8” (200mm)

1-5/8” (40mm)

G03-100

12” (300mm)

1-5/8” (40mm)

G03-300

“QUADRATO” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass 5mm

(A) Size

(B) Size

Set

4” (100mm)

G13-100

15mm

All measurements are approximate www.vetroglass.com

Self Adhesive Sliding Handles

GLU Series

“APPUNTATO” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass 5mm

20mm

(A) Size

(B) Size

Set

4” (100mm)

2-3/8” (60mm)

G05-100

8” (200mm)

2-3/8” (60mm)

G05-200

12” (300mm)

2-3/8” (60mm)

G05-300

“DIAMANTE” NO-DRILL HANDLE

5mm

- Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass

15mm

(A) Size

(B) Size

Set

4” (100mm)

3” (75mm)

G06-100

“TRIANGOLARE” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass

5mm

(A) Size

(B) Size

Set

4” (100mm)

3” (75mm)

G07-100

8” (200mm)

5-7/8” (150mm)

G07-200

“PERCORSI” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass

5mm

(A) Size

(B) Size

Set

4” (100mm)

3” (75mm)

G08-100

8” (200mm)

5-7/8” (150mm)

G08-200

All measurements are approximate www.vetroglass.com

Self Adhesive Sliding Handles

GLU Series

5mm

“ARMONIA” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass (A) Size

Set

4” (100mm)

G12-100

5-7/8” (150mm)

G12-150

“BIFORCUTA” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass

5mm

(A) Size

(B) Size

Set

4” (100mm)

5/8” (15mm)

G11-100

8” (200mm)

1-3/16” (30mm)

G11-200

“BUMERANG” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass

5mm

(A) Size

(B) Size

Set

4” (100mm)

3” (75mm)

G09-100

8” (200mm)

5-7/8” (150mm)

G09-200

“SCARPE” NO-DRILL HANDLE

5mm

- Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass (A) Size

(B) Size

Set

4” (100mm)

3” (75mm)

G10-100

8” (200mm)

5-7/8” (150mm)

G10-200

All measurements are approximate www.vetroglass.com

Sliding door handle

GLU Series

All measurements are approximate www.vetroglass.com

Self Adhesive Sliding Handles

GLU Series

“SQUILLARE” NO-DRILL HANDLE

(A) Size

Set

4” (100mm)

G14-100

15mm

5mm

- Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass

“PISTA” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass

20mm

5mm

(A) Size

(B) Size

Set

4” (100mm)

2-3/8” (60mm)

G17-100

8” (200mm)

2-3/8” (60mm)

G17-200

12” (300mm)

2-3/8” (60mm)

G17-300

“PIAZZA” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass 5mm

(A) Size

(B) Size

Set

2-6/8” (70mm)

G15-70

5mm

“CERCHIO” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass (A) Size

Set

2-6/8” (70mm)

G16-70

All measurements are approximate www.vetroglass.com

Self Adhesive Sliding Handles

GLU Series

“OVALE SOLIDO” NO-DRILL HANDLE

5mm

- Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass (A) Size

(B) Size

Set

6-3/8” (160mm)

3/4” (20mm)

G18-160

10-3/8” (260mm)

3/4” (20mm)

G18-260

“RETTANGOLO SOLIDO” NO-DRILL HANDLE - Made of 304 grade Stainless Steel GLASS FABRICATION - Use with 3M adhesive; glass cutting not required FOR USE - Tempered glass (A) Size

(B) Size

Set

7-1/8” (180mm)

3/4” (20mm)

G19-180

20mm

All measurements are approximate www.vetroglass.com

Door Pull Handles

CHC Series CHC608

- Made of 304 grade Stainless Steel - Only Set GLASS FABRICATION - Requires two 5/8” (16mm) diameter holes FOR USE - Tempered glass 5/16” to 1/2” (8 to 12mm) thick - Wood / Aluminum doors 1-3/8” to 2-1/4” (35 to 57mm) thick

A B

(A) Size

(B) Size

Size (C)

11-13/16” (300mm)

13-3/4” (350mm)

1-9/16” (40mm)

CHCP008 B

Ø 2-3/8”(60mm)

(A) Size

(B) Size

Size (C)

13-3/4” (350mm)

8-5/16” (211mm)

2-3/8” (60mm)

Glass cut sheet

5/8” (16mm)

All measurements are approximate www.vetroglass.com