Keor LP

Conventional UPS - Single phase On-line double conversion VFI Characteristics:

- Single-phase UPS

- Power from 1 to 3 kVA

- VFI-SS-111 on-line double conversion

- RS232 communication port

- LAN / SNMP connectivity

- Uptime can be extended with additional battery cabinets

- Compact design and low footprint

UPS with IEC sockets with french standard sockets

For the choice of communication accessories, see the dedicated section of this catalogue.

n Characteristics

Daker DK Plus

Dual conversion online UPS (rack/tower) - single phase VFI

Characteristics:

- Conventional single-phase UPS

- Power from 1 to 10 kVA

- 0.9 power factor for 1000-3000, 1 for 5000-10000

- On-Line double conversion VFI-111

- User-friendly display

- Additional battery compartment to extend backup time

- Intelligent battery management

- Operator-friendly replaceable battery

- Display of battery status, system parameters, battery charge level and faults.

- Dedicated slot to connect one of the following two optional accessories: network interface (WEB/SNMP) or relay interface capable of providing isolated contacts for applications on industrial panels or remote alarm panels.

- Automatic bypass (and manual, optional) to guarantee uninterruptible power supply to critical loads, in the event of electronic failure, overload, overheating or scheduled maintenance.

- Maintenance bypass switch box (MTBS).

NOTE: the stated backup times in minutes are estimated and may vary according to the load characteristics, operating conditions and environment.

Daker DK Plus

NOTE: The stated backup times in minutes are estimated and may vary according to the load characteristics, operating conditions and environment

*This value is based on data collected from a technological channel operating on an industrial basis. It does not pre-validate the effective use of this channel for end-of-life of this product.

Daker DK Plus

N

NOTE: the stated backup times in minutes are estimated and may vary according to the load characteristics, operating conditions and environment.

For the choice of communication accessories, see the dedicated section of this catalogue.

Daker DK Plus

Long backup times table

NOTE: the stated backup times in minutes are estimated and may vary according to the load characteristics, operating conditions and environment.

Keor S

Conventional UPS - Single-phase On-line double conversion n UPS with internal batteries Backup time up to 50 min for 3 kVA

Characteristics:

- 3kVA to 10 KVA Capacity Range

- 1 Phase Input / 1 Phase Output

- IGBT Inverter - IGBT Rectifier

- High Efficiency

- Digital Signal Processor (DSP)

- High Input Power Factor (PFC)

- High Output Power Factor

- Low Input and Output Total Harmonic Distortion (THD)

- Generator Compatible Operation

- Standard IP31 Protection for Industrial Applications

- On Site Modular Paralleling Capability up to 4 Units (except 3kVA)

- Additional External Chargers for Long Back-Up Time Solutions (6-10kVA only)

- Availability of Different Communication Types

- User friendly diagnostic

- Advanced management and communication

- Integrated By-pass for maintenace

- LCD display with interactive menù

3 107 42 Battery cabinet (for KEOR S 3000)

3 107 43 Battery cabinet (for KEOR S 3000)

3 107 44 Battery cabinet (for KEOR S 6000-10000)

3 107 45 Battery cabinet (for KEOR S 6000-10000)

Accessories Description

3 109 61 Battery charger for additional battery cabinet (for 3 107 41 - 3 107 42 - 3 107 43)

3 109 54 Battery charger for additional battery cabinet (for 3 107 44 - 3 107 45) n UPS for long Backup time with additional battery cabinet n UPS with isolation transformer built in n Rear pannel n Long Backup time table

NOTE: The stated Backup times in minutes are estimated and may vary according to the load characteristics, operating conditions and environment. For the choice of communication accessories, see the dedicated section of this catalogue.