Fiber Accessories are available
Additional products for the extension and optimization of optical single- and multi-mode fiber optical networks. Available are attenuators, couplers, pigtails and other fiber accessories in different versions for different requirements. The most used Fiber Accessories products are Fiber Attenuators and Fiber Couplers. A Fiber Attenuator is a device used to reduce the power level of an optical signal. Fiber Attenuators have a (E9/125) 50 micrometer (Îźm) core for the connection of single-mode fiber optic patch cables. The attenuation value (dB) of an optical fiber connection can be individually increased by means of a Fiber Attenuator with LC, SC or ST plug, because optical Fiber Attenuators are available in different dB gradations (from 1 to 30 dB). A Fiber Coupler is a coupler for fiber optic patch cord connections used in optical fiber networks to extend existing connections. Fiber Couplers are used either for the direct connection of a Fiber Patch Cord to another Fiber Patch Cord or for the use in fiber patch panels, in which the Fiber Couplers can be screwed in.
This allows Fiber Attenuators and Fiber Couplers in connection with Fiber Patch Cords to transmit optical signals from point to point with a low signal loss, even at large distances. Fiber Attenuators and Fiber Couplers are mainly used for the extension of fiber patch cords or for the implementation in patch panels and further extensions of optical fiber connections of existing highspeed networks. Fiber Attenuators and Fiber Couplers in connection with fiber patch cords can interconnect routers, servers, firewalls, load balancers, FTTX systems and similar hardware with other optical ports among each other. Fiber Attenuators and Fiber Couplers are available as simplex (one fiber) or duplex (two fibers) variant, enabling multi-mode and single-mode data transfers on longer reach.