CEA Myanmar - Bottle Blower Installation

SCOPE

Location Yangon, My. Duration 5 Days Project value 25,000 USD Weights Bottle blower Oven Compressor Conveyor & feed unit Chiller unit Air handling unit x2 Equipment Used 10t City crane 3.7t Telehandler 5t Forklift 30t Toejacks 12t Skates 8 Inch steel form work 4 Axle low bed trailer 6 Man installation team

12 Tonnes 4.9 Tonnes 4 Tonnes 2 Tonnes 2 Tonnes 1.5 Tonnes

CEA Project Logistics Myanmar were employed for the transportation, customs process and installation of a pre-formed bottle blowing machine and itâ&#x20AC;&#x2122;s auxiliary parts at the Loi Hein soft drinks factory in Yangon, Myanmar. This was the completion of a three-part project that CEA had been conducting.

x6 x6

MAIN BLOWER MACHINE LOWERED ON TO 12T SKATES READY TO MOVE INTO THE FACTORY

CASE STUDY Bottle Blower Installation

CS020 1/2

BOTTLE BLOWER INSTALLATION

5T FORKLIFT ASSISTS IN SKATING

BLOWER BEING SKATED ACROSS FACTORY

OVERSIZED CARGO ARRIVAL AT FACTORY

CEA service teams took charge of the cargo as it arrived at the port and used escort vehicles throughout the transportation of the oversized cargo to the factory site. The equipment with a value of over 500,000 USD was carefully unloaded and unpacked and lifted on to 15 tonne multi-wheel skates to ease the manoeuvring through and across the factory to the installation site.

STANDARDIZED CARGO AWAITS UNOADING

BOTTLE BLOWER INSTALLATION

AUXILIARY MACHINERY IN PLACE

BLOWER AND OTHER MACHINERY IN PLACE

Due to the complexity of the factory layout, a 10-Tonne city crane was used inside to facilitate the movement of some of the machinery, modifications to several of the factoryâ&#x20AC;&#x2122;s walls were also made. When all the bottle blower machinery parts were in place, each one was jacked down from its skates and final levelling commenced. The whole project was completed within the five-day time frame and under budget.

TELEHANDLER UNLOADING CONTAINERS

CEA TEAMS UNPACK THE CARGO

CEA PROJECT LOGISTICS G-18 PEARL CONDO KABAR AYE PAGODA ROAD BAHAN TOWNSHIP YANGON MYANMAR +959 421 031 286 MAIN PARTS ASSEMBLED IN OPERATIONAL LOCATION AND AWAITING FINAL INSTALLATION

www.ceaprojects.com

CASE STUDY Bottle Blower Installation

CS020 2/2

Turn static files into dynamic content formats.

Create a flipbook

CEA Myanmar - Bottle Blower Installation

Published on Feb 11, 2016

CEA Project Logistics

CEA Project Logistics Myanmar recently completed the final part of a three-part project in Yangon. The whole project consisted of the moving of an entire soft drinks factory from its old location to the new site some 20kms away. The final part of the project involved the transportation and installation of a new Bottle Blower Machine and other auxiliary parts, the total value of the cargo was in excess of 500,000 USD. CEA Myanmar was responsible for the unloading at the port, customs process, transportation and eventual installation. Due to the complex layout of the factory several modifications were made to the walls to facilitate the installation process. The project was completed in under five days ahead of schedule and within operational budget.